e_l5ax4_us_7.fm Page 1 Friday, April 23, 2004 2:13 PM
INFORMATION TO USER
PRECAUTIONS
J
J
Safety Guard
In case of problem
Protect from high temperatures
Do not use the unit if smoke or a strange odor comes from the unit,
or if it seems not to function correctly. Turn off the power
immediately, and consult your dealer or an Authorized Sanyo
Service Center.
Do not install close to stoves, or other heat sources, such as
spotlights, etc., or where it could be subject to direct sunlight, as this
could cause deformation, discoloration or other damages.
Be careful when installing close to the ceiling, in a kitchen or boiler
room, as the temperature may rise to high levels.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THIS UNIT.
INSTRUCTION MANUAL
(Warranty attached)
VCC-6584
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
J
Do not open or modify
COLOR CCD camera
J
Cleaning
Do not open the cabinet, as it may be dangerous and cause
damage to the unit. For repairs, consult your dealer or an
Authorized Sanyo Service Center.
Dirt can be removed from the cabinet by wiping it with a soft cloth.
To remove stains, wipe with a soft cloth moistened with a soft
detergent solution and wrung dry, then dry by wiping with a soft
cloth.
Do not use benzine, thinner or other chemical products on the
cabinet, as this may cause deformation and paint peeling. Before
using a chemical cloth, make sure to read all accompanying
instructions. Make sure that no plastic or rubber material comes
into contact with the cabinet for a long period of time, as this may
cause damage or paint peeling.
For the customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.
Pour la clientèle canadienne
Cet appareil numerique de la Classe B est conforme a la norme NMB-003
du Canada.
J
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside
the unit. If used with a foreign object inside, it could cause a fire, a
short-circuit or damage. Be careful to protect the unit from rain, sea
water, etc. If water or liquid gets inside the unit, disconnect the
power cord immediately, and consult your dealer or an Authorized
Sanyo Service Center.
This installation should be made by a qualified service person and should
conform to all local codes.
Dimensions: mm
56
108
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
1.3
99
J
Be careful when handling the unit
45
To prevent damage, do not drop the unit or subject it to strong
shock or vibration.
11
J
Install away from electric or magnetic fields
16
25.8
1/4”–20 UNC
If installed close to a TV, radio transmitter, magnet, electric motor,
transformer, or audio speakers, the magnetic field they generate
may cause image distortion.
28
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
J
Protect from humidity and dust
To prevent damage, do not install the unit where there is greasy
smoke or steam, where the humidity may get too high, or where
there is a lot of dust.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by Sanyo may void the user's
authority to operate this camera.
Depending on the conditions of use, installation and
Printed on recycled paper
environment, please be sure to make the appropriate settings
and adjustments. If you need help with installation and/or
settings, please consult your dealer.
1AC6P1P2784--
L5AX4/US (0504TR-SY)
SANYO Electric Co., Ltd.
Printed in Japan
NAMES AND FUNCTIONS OF PARTS
TROUBLESHOOTING
Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, consult your
dealer or an Authorized Sanyo Service Center.
SPECIFICATIONS
Scanning system
: NTSC standard TV system
LOCK (flange-back lock screw)
(525 TV lines, 30 frames/s)
Flange-back adjustment dial
Interlace
: PLL 2:1 interlace
Image device
: 1/3 inch solid state image device CCD
: 768 (H) x 494 (V)
Camera attachment bracket
Used to attach the camera.
Number of pixels
in image area
J
If no image appears
Lens mount cap
Is the coaxial cable attached securely?
Are the power and voltage normal?
Has the iris of the lens been adjusted correctly (with the LEVEL
dial)?
Sync system
:
Internal sync/Line lock (only when using an AC 24 V
adapter)
Protects internal parts of the camera, such as the CCD, from damage.
Q
Resolution
: 520 TV lines horizontally, 350 TV lines vertically
: 1.0 V(p-p)/75 Ω, composite
: More than 48 dB (More than 50 dB for AGC OFF)
Attaching the lens
Video output level
Image S/N ratio
Use a DC type auto-iris lens (sold separately).
NOTE:
Is there adequate illumination?
Minimum required
illumination
(incandescent lighting)
: GAIN HI: Approx. 0.5 lx (F 1.2 lens)
GAIN NORM: Approx. 1.0 lx (F 1.2 lens)
Do not use a lens if length “L” is more than 5 mm.
Otherwise, it may damage the camera and prevent
proper installation.
Depending on the type of lens, the shape of the lens plug
may differ. In this case, consult your dealer or an
J
If the image is unclear
Backlight
compensation
: OFF/Multi-spot metering (2 modes)/Center-
weighted metering
Is the monitor adjusted correctly?
Is the flange-back position correctly set?
Is the lens in focus?
L
Authorized Sanyo Service Center.
When attaching a C mount lens, attach the lens to the
camera after inserting the C mount ring (sold
separately).
Iris function
: Auto-iris/Electronic-iris
: 4-pin
Lens iris output
terminal
Is the lens dirty?
Flange-back
White balance
Gain control
Lens mount
: 12.5 mm ±0.5 mm
: Auto/Manual
: Normal/High
: CS mount
Dirt or fingerprints on the lens can adversely affect the image.
Gently wipe any dirt or fingerprints off the lens with a soft cloth or
lens cleaning paper and cleaning fluid (commercially available).
GND, AC24V, DC12V (ground terminal, AC 24 V or DC 12 V input
terminal)
1
Remove the lens mount
cap from the camera.
VIDEO OUT (video output terminal: BNC connector)
Connects to the video input terminal on the monitor, digital video recorder
or time-lapse VCR.
2
3
Install the auto-iris lens.
1
Operating
environment
: Temperature: -10°C – +50°C (14°F – 122°F)
Humidity: less than 90%RH (no condensation)
Connect the lens plug to
the LENS terminal on
the side of the camera.
SERVICE
The camera is a precision instrument. Handle it carefully and
always follow the safety precautions. If the camera requires service,
never try to repair it yourself or open the casing.
POWER (power indicator)
Lights when the camera power is on.
Power supply
: AC 24 V ±10%, 60 Hz/DC 12 – 15 V ±10%
Power consumption : 3.6 W (with auto-iris lens)
Weight : Approx. 280 g (without lens)
Camera adjustment/setting section
See “CAMERA ADJUSTMENTS/SETTINGS”.
LENS (lens iris output terminal)
Used to connect the lens plug when the auto-iris lens is attached.
c Brake coil (-) d Brake coil (+)
e Drive coil (+) f Drive coil (-)
For servicing, maintenance, or repairs, consult your dealer or an
Authorized Sanyo Service Center.
3
Appearance and specifications are subject to change without prior notice or
obligations.
2
CS mount type lens
Download from Www.Somanuals.com. All Manuals Search And Download.
|