SSD Ultra320 SCSI 3.5"
New Software Version 1.08
Product Update, March 2007
A new software version 1.08 has been released for SSD Ultra320 SCSI 3.5" (formerly known as FFD
3.5" Ultra320 SCSI). This version replaces the current software version 1.07. The new software
version offers the following improvements and changes:
Support for the SLC NAND flash components that are manufactured using the 60 nm
process, now commonly available in today’s market.
Improve the support for the IREC (IRIG) 106, Chapter 10 requirement.
Better compatibility with various SCSI hosts.
No support for Wide DT Fast-40 and ST Fast-40 (80 MB/sec) SCSI Modes.
The following are the supported SCSI Modes:
Asynchronous mode
DT/PT modes
Wide PT Fast-160 (Ultra320 – 320 MB/sec)
Wide DT Fast-80 (Ultra160 – 160 MB/sec)
Wide DT Fast-20 (40 MB/sec)
Wide DT Fast-10 (20 MB/sec)
ST modes
Fast-20 (40 MB/sec)
Fast-10 (20 MB/sec)
Fast-5 (10 MB/sec)
There is no change in the product specification for the SSD Ultra320 SCSI 3.5” 80-pin and 68-pin,
except for the supported SCSI modes change.
Reason for Change
As flash components manufactured with the new 60 nm process have become more widely available in
the market today, flash components manufactured with the older processes are being phased out of
the market, and as a result are subject to lower availability.
Availability
The SSD Ultra320 SCSI 3.5" and will be manufactured with the new flash process from April 2007.
Ordering Information
1
SSD Ultra320 SCSI 3.5" New Software Version 1.08
DC-000255
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Contact Us
for any further information or assistance.
Guy Freikorn
SSD Product Manager
SanDisk Corporation
Corporate Headquarters • 601 McCarthy Blvd. • Milpitas, CA 95035
Phone (408) 801-1000 • Fax (408) 801-8657
SanDisk® Corporation general policy does not recommend the use of its products in life support applications where
in a failure or malfunction of the product may directly threaten life or injury. Per SanDisk Terms and Conditions of
Sale, the user of SanDisk products in life support applications assumes all risk of such use and indemnifies SanDisk
against all damages. See “Disclaimer of Liability.”
This document is for information use only and is subject to change without prior notice. SanDisk Corporation
assumes no responsibility for any errors that may appear in this document, nor for incidental or consequential
damages resulting from the furnishing, performance or use of this material. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrievable manner or translated into any language or computer
language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,
without the prior written consent of an officer of SanDisk Corporation.
All parts of the SanDisk documentation are protected by copyright law and all rights are reserved.
SanDisk and the SanDisk logo are registered trademarks of SanDisk Corporation. CompactFlash is a U.S.
registered trademark of SanDisk Corporation.
Product names mentioned herein are for identification purposes only and may be trademarks and/or registered
trademarks of their respective companies.
© 2007 SanDisk Corporation. All rights reserved.
SanDisk products are covered or licensed under one or more of the following U.S. Patent Nos. 5,070,032;
5,095,344; 5,168,465; 5,172,338; 5,198,380; 5,200,959; 5,268,318; 5,268,870; 5,272,669; 5,418,752; 5,602,987.
Other U.S. and foreign patents awarded and pending.
Lit. No. PU-SCSI-0207 Rev. 1.0
Revision History
02/07
Printed in U.S.A.
February 2007
Revision 1.0—initial release
3
SSD Ultra320 SCSI 3.5" New Software Version 1.08
DC-000255
Download from Www.Somanuals.com. All Manuals Search And Download.
|