HT-E6500W
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
HT-E6500W_ZA_0315.indd 1
2012-03-15 오후 4:34:26
Download from Www.Somanuals.com. All Manuals Search And Download.
13 . Unplug this apparatus during lightning storms
Precautions
or when unused for long periods of time.
14 . Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1 . Read these instructions.
2 . Keep these instructions.
3 . Heed all warnings.
Disc Storage & Management
4 . Follow all instructions.
• Holding Discs
5 . Do not use this apparatus near water.
6 . Clean only with a dry cloth.
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
7 . Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
8 . Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
9 . Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
- When cleaning, wipe gently from the inside to
the outside of the disc.
- Disc Storage
Do not keep in direct sunlight.
Keep in a cool ventilated area.
10 . Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
Keep in a clean protection jacket and store
vertically.
11 . Only use attachments/accessories specified
Handling Cautions
by the manufacturer.
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases, on the apparatus.
12 . Use only with the cart,
stand, tripod, bracket,
or table specified by the
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
|
English
3
HT-E6500W_ZA_0315.indd 3
2012-03-15 오후 4:34:35
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
• Do not plug multiple electric devices into the
same wall socket. Ovedrloading a socket can
cause it to overheat, resulting in a fire.
• Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.)
• Maintenance of the Cabinet
• Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
• If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
product’s HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
• The product outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
• If the product makes an abnormal noise or
produces a burning smell or smoke, turn off
the power switch immediately and disconnect
the power plug from the wall outlet. Then,
contact the nearest customer service center for
technical assistance. Do not use the product.
Using the product as it is may cause a fire or an
electric shock.
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46 inch screen, stay 138
inches (11.5 feet) from the screen.
Using the 3D Function
- Place the 3D video screen at eye level for the
best 3D picture.
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• When the product is connected to some 3D
devices, the 3D effect may not function properly.
• This product does not convert 2D content into
3D.
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
• “Blu-ray 3D” and “Blu-ray 3D” logo are
trademarks of the Blu-ray Disc Association.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
Copyright
• Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
• A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
|
4
English
HT-E6500W_ZA_0315.indd 4
2012-03-15 오후 4:34:36
Download from Www.Somanuals.com. All Manuals Search And Download.
License
• iPad, iPhone, iPod, iPod classic, iPod nano,
iPod shuffle, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other
countries.
• Dolby and the double-D symbol are registered
trademarks of Dolby Laboratories.
• This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
• Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents
issued & pending. DTS-HD, the Symbol, & DTS-
HD and the Symbol together are registered
trademarks & DTS-HD Master Audio | Essential
is a trademark of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138,
USA.”
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other
U.S. and worldwide patents issued and pending
as well as copyright and trade secret protection
for certain aspects of such technology. Cinavia
is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation. All
rights reserved by Verance. Reverse engineering
or disassembly is prohibited.
• Oracle and Java are registered trademarks of
Oracle and/or its affiliates. Other names may be
trademarks of their respective owners.
• Open Source License Notice
- In the case of using open source software,
Open Source Licenses are available on the
product menu.
• This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
• Blu-ray Disc™, Blu-ray™, and the logos are
trademarks of Blu-ray Disc Association.
|
English
5
HT-E6500W_ZA_0315.indd 5
2012-03-15 오후 4:34:36
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
SAFETY INFORMATION
SETTINGS
2
3
3
3
4
4
5
Warning
22 The Initial Settings Procedure
24 The Home Screen
Precautions
Disc Storage & Management
Handling Cautions
Using the 3D Function
Copyright
25 Accessing the Settings Screen
26 Settings Menu Functions
31 Auto Sound Calibration
31 Networks and the Internet
36 Upgrading Software
License
GETTING STARTED
MEDIA PLAY
7
8
Disk and Format Compatibility
38 The AllShare Play Screen
Logos of Discs the product can play
39 Playing Files on a USB Storage Device or
iPod/iPhone
11 Accessories
12 Front Panel
12 Rear Panel
39 iPod/iPhone Models You Can Use with
This Product
40 The Function Screen
13 Remote Control
40 Playing Commercial Video Discs
40 Playing Commercial Audio Discs
CONNECTIONS
41 Playing a Disc with User Recorded
15 Attaching the Toroidal Ferrite Core to the
Content
Power Cord of the Main Unit
41 Using the AllShare Network Function
43 Controlling Video Playback
45 Controlling Music Playback
46 Controlling Photo Playback
15 Connecting the Speakers
16
16
Speaker Components
Connecting The Speakers
18 Connecting the FM Antenna
47 Using the Tools Menu when a File is
18 Connecting to an iPod/iPhone
Highlighted
18
18
Using a USB Cable
Using a Dock
49 Listening to Radio
49 Using the Special Effects Remote Control
19 Connecting to a TV
Buttons
19
Connecting to a TV
Method 1
with an HDMI Cable - Best Quality
(Recommended)
NETWORK SERVICES
51 Using Smart Hub
53 BD-LIVE™
19
Connecting to a TV with a
Method 2
Video Cable - Good Quality
53 Using Disc to Digital
20 Connecting to External Devices
20
HDMI IN : Connecting to
Method 1
APPENDIX
an External Component with an HDMI
Cable
55 Additional Information
61 Troubleshooting
64 Specifications
20
20
OPTICAL : Connecting an
Method 2
Method 3
External Digital Audio Component
AUX IN : Connecting an
External Analog Component
21 Connecting to a Network Router
21
21
Wired Network
Wireless Network
|
6
English
HT-E6500W_ZA_0315.indd 6
2012-03-15 오후 4:34:37
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Disk and Format Compatibility
Disc types and contents your product can play
Media
Disc Type
Details
Blu-ray Disc
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
3D Blu-ray Disc
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
VIDEO
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have
been recorded and finalized, or a USB storage media containing MKV, MP4
contents.
CD-RW/-R, DVD-RW/-R, Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage
BD-RE/-R media containing MP3 or WMA contents.
CD-RW/-R, DVD-RW/-R, Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage
BD-RE/-R media containing JPEG contents.
MUSIC
PHOTO
|
NOTE
|
\ The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\ If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
\ Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.
\ Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30 Mbps.
\ Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio
adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your product cannot play
• HD DVD
• DVD-RAM
• DVD-RW(VR mode)
• 3.9 GB DVD-R Disc
for Authoring.
• DVD-ROM/PD/MV-
Disc, etc
• Super Audio CD
(except CD layer)
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
|
NOTE
|
\ This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or
limited operation and provide only certain features during playback.
Please note that this is not a defect in the product.
\ Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc
formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the
manufacture of discs.
\ Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter difficulty when
playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on
playback restrictions.
\ Some commercial discs and DVD discs purchased outside your region may not play on this product.
|
English
7
HT-E6500W_ZA_0315.indd 7
2012-03-15 오후 4:34:38
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Region Code
Logos of Discs the product can play
Both products and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this product is displayed
Blu-ray Disc
3D Blu-ray Disc
Dolby
on the rear panel of the product.
Region
Disc Type
Area
Code
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
A
BD-LIVE
DTS
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
Blu-ray Disc
B
NTSC broadcast system in
U.S.A, Canada, Korea, Japan
India, China, Russia, Central and
South Asia.
C
1
2
3
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
Java
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
Supported Formats
Music File Support
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
DVD-VIDEO
4
File
Audio
Container
Support Range
Extension
Codec
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
*.mp3
MP3
-
MP3
5
6
Compliant with
WMA version 10
China
* Sampling rates (in
kHz) - 8, 11, 16,
22, 32, 44.1, 48
|
NOTE
|
*.wma
WMA
WMA
* Bitrates - All
bitrates in the
range 5kbps to
384kbps
\
If the Region number of a Blu-ray Disc/DVDs does not
correspond to the Region number of this product, the
product cannot play the disc.
|
8
English
HT-E6500W_ZA_0315.indd 8
2012-03-15 오후 4:34:39
Download from Www.Somanuals.com. All Manuals Search And Download.
Video File Support
Frame rate
(fps)
Bitrate
(Mbps)
File Extension
Container
Video Codec
H.264 BP/MP/HP
MPEG4 SP/ASP
H.264 BP/MP/HP
MPEG4 SP/ASP
H.264 BP/MP/HP
MPEG4 SP/ASP
Resolution
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
Audio Codec
MP3
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
25
8
AC3
*.avi
AVI
MKV
ASF
LPCM
DTS Core
MP3
AC3
25
8
*.mkv
*.asf
LPCM
DTS Core
MP3
AC3
25
8
LPCM
WMA
Window Media
*.wmv
*.mp4
6 ~ 30
25
WMA
WMV (wmv9)
MP4
1920x1080
Video v9
6 ~ 30
6 ~ 30
6 ~ 30
25
8
25
8
25
25
25
25
25
25
25
25
H.264 BP/MP/HP
MPEG4 SP/ASP
H.264 BP/MP/HP
MPEG4 SP/ASP
MPEG2
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
MP3
AAC
*.3gp
*.vro
AAC
3GPP
6 ~ 30
AC3
24/25/30
24/25/30
24/25/30
24/25/30
6 ~ 30
24/25/30
6 ~ 30
6 ~ 30
VRO
VOB
MPEG
LPCM
MPEG1
MPEG1
MPEG2
H.264
MPEG2
H.264
VC1
AC3
MPEG
LPCM
AAC
*.mpg
PS
TS
*.mpeg
AC3
AAC
MP3
DD+
*.ts
*.tp
*.trp
Limitations
- Even when a file is encoded by a supported codec listed above, the file might not be played if its
content has a problem.
- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is
corrupted.
- Files having higher bit or frame rates than standard may stutter when played back.
|
English
9
HT-E6500W_ZA_0315.indd 9
2012-03-15 오후 4:34:41
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
- The Seek (skip) function is not available if the
• This product cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
file’s index table is damaged.
- When you playback a file remotely through a
network connection, video playback may stutter
depending on the network speed.
• Your product only supports video that is under
30fps (frame rate).
• Your product only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
Video decoder
- Supports up to H.264 Level 4.1
- Does not support H.264 FMO/ASO/RS, VC1
SP/MP/AP L4 and AVCHD
• Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this product.
- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
- Does not support GMC 2 or higher
• If some USB devices require excessive power,
they may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a
wall socket. If the problem continues, contact
the USB HDD manufacturer.
Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA 9 PRO multi-channel
files if the number of channels is more than 2 or
the files require lossless audio decoding.
• You must remove the USB storage device safely
(by performing the “Safely Remove USB”
function) to prevent possible damage to the
USB memory.
- Does not support WMA sampling rate of
22050Hz mono
Press the HOME button to move to the home
menu, press the YELLOW (C) button, and then
press the
button.
E
Notes on the USB connection
• SAMSUNG is not responsible for any data file
damage or data loss.
• Your product supports USB storage media,
MP3 players, digital cameras, and USB card
readers.
AVCHD
• The product does not support folder or file
names longer than 128 characters.
(Advanced Video Codec High Definition)
• Some USB/digital camera devices may not be
compatible with the product.
• This product can play back AVCHD format
discs. These discs are normally recorded and
used in camcorders.
• Your product supports the FAT 16, FAT 32, and
NTFS files systems.
• The AVCHD format is a high definition digital
video camera format.
• Connect USB devices directly to the product’s
USB port. Connecting through a USB cable
may cause compatibility problems.
• The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
• Some AVCHD discs use the “x.v.Color” format.
This product can play back AVCHD discs that
use the “x.v.Color” format.
• The product does not support the PTP protocol.
• Do not disconnect a USB device during a
“loading” process.
• “x.v.Color” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
• The bigger the image resolution, the longer the
image takes to display.
|
10
English
HT-E6500W_ZA_0315.indd 10
2012-03-15 오후 4:34:42
Download from Www.Somanuals.com. All Manuals Search And Download.
|
NOTE
|
\ Some AVCHD format discs may not play, depending on the recording conditions.
\ AVCHD format discs need to be finalized.
\ “x.v.Color” offers a wider color range than normal DVD camcorder discs.
\ Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
Accessories
Check for the supplied accessories below.
(For Power cord)
Video Cable
FM Antenna
Soft Cloth
Toroidal Ferrite Core
(3301-000144)
(AH39-40001T)
(AH42-00021A)
(AH81-02286C)
FUNCTION
TV
SOURCE
RECEIVER
SLEEP
BD
TV
1
4
2
5
8
0
3
6
7
9
DISC MENU
TITLE MENU
POPUP
MUTE
TUNING
S/W LEVEL
VOL
/
CH
HOME
REPEAT
TOOLS
INFO
EXIT
RETURN
A
TUNER
M
E
M
O
R
Y
M
O
/
S
T
B
C
D
SMART
SEARCH
ꢀ
'
ĺ
ꢁ
'
3D SOUND
HUB
Disc2Digital
PANDORA SUBTITLE SOUND
EFFECT
User Manual
iPod Dock
ASC microphone
(AH30-00099A)
Remote Control (AH59-02402A)/
Batteries (AAA size) (4301-000116)
(AH68-02463A)
(AH96-00051C)
pFirgoudruecstaanpdpeilalurasntrcaeti.ons in this User Manual are provided for reference only and may differ from actual
|
English
11
HT-E6500W_ZA_0315.indd 11
2012-03-15 오후 4:34:42
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Front Panel
VACUUM
VOLUME CONTROL
TUBE AMP
OPEN/CLOSE
ENTER
PLAY/PAUSE
STOP
DISC TRAY
POWER
FUNCTION
ASC IN
5V 500mA
DISPLAY
ASC IN USB HOST
REMOTE CONTROL SENSOR
|
NOTE
|
\ If Cellular phone or mobile device is near vacuum tube amp, or put other electronic products on the top of the product would
cause noise from the audio.
\ Please be careful that children do not touch the product's surface When the set is on working. It would be hot.
\ To upgrade the product's software through the USB Host jack, you must use a USB memory stick.
\ When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the
button on the product or
6
the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
button.
E
Rear Panel
AUX
IN
VIDEO
OUT
SPEAKERS OUT
FM ANT
COOLING FAN
OPTICAL
DIGITAL
AUDIO IN
FM ANTENNA
iPod
LAN
WIRELESS
SPEAKER IMPEDANCE
:
3
HDMI OUT
1
HDMI IN
2
VIDEO OUT
iPod
AUX IN
AUX
IN
VIDEO
OUT
SPEAKERS OUT
FM ANT
OPTICAL
DIGITAL
AUDIO IN
iPod
LAN
WIRELESS
HDMI OUT
1
HDMI IN
2
SPEAKER IMPEDANCE
:
3
SPEAKER OUTPUT
CONNECTORS
LAN TERMINAL
HDMI OUT HDMI IN
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
TX CARD CONNECTION
(WIRELESS)
|
NOTE
|
\ Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation. Do not
obstruct the cooling fan or ventilation holes.
|
12
English
HT-E6500W_ZA_0315.indd 12
2012-03-15 오후 4:34:46
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Tour of the Remote Control
Press to select Blu-ray's mode
(HDMI1, AUX, BD/DVD, etc.).
or
Turn the product on and off.
FUNCTION
TV
SOURCE
Press to select TV's video mode.
To change to TV mode, press the
TV button.
Set a Sleep time to shut off the
product.
RECEIVER
SLEEP
To change to Home Theater,
press the BD button.
BD
TV
To open and close the disc tray.
1
4
2
5
8
0
3
6
Press numeric buttons to operate
options.
7
9
DISC MENU
TITLE MENU
Use to enter the Popup menu/
Title menu.
POPUP
Press to view the disc menu.
Press to search backwards or
forwards.
Press to skip backwards or forwards.
Press to stop/play a disc.
Press to pause a disc.
Cut off the sound temporarily.
MUTE
TUNING
Search for active FM stations and
to change channels.
Adjust the volume.
S/W LEVEL
VOL
/
CH
Press to use Netflix.
Use to adjust the level of the
subwoofer.
HOME
REPEAT
Press to move to the Home screen.
Allows you to repeat a title,
chapter, track or disc.
TOOLS
INFO
EXIT
Press to use the Tools menu.
Use to display the playback
information when playing
a Blu-ray/DVD disc.
Select on-screen menu items and
change menu values.
Press to exit the menu.
RETURN
A
Return to the previous menu.
Use to set a preset radio frequency.
TUNER
MO/ST
MEMORY
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
B
C
D
Select MONO or STEREO for radio
broadcasts.
SMART
SEARCH ꢀ'ĺꢁ' 3D SOUND
HUB
Press to use Smart Hub.
Disc2Digital PANDORA SUBTITLE SOUND
Press to apply 3D sound effect.
Press to apply sound effects.
EFFECT
Press to use Disc2Digital.
Press to search contents.
Press to enjoy an ordinary 2D video
in 3D mode.
Press to use Pandora.
Selects the disc subtitle language.
|
English
13
HT-E6500W_ZA_0315.indd 13
2012-03-15 오후 4:34:49
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
TV Control Codes
Installing batteries in the Remote
Control
Brand
Code
56, 57, 58
01, 15
Brand
Code
Admiral
Mitsubishi/
MGA
18, 40, 59, 60, 75
(M.Wards)
B1attery size: AAA
2
A Mark
Anam
AOC
MTC
NEC
18
18, 19, 20, 40, 59, 60
01, 02, 03, 04, 05,
06, 07, 08, 09, 10, 11,
12, 13, 14
Nikei
03
03
03
Onking
01, 18, 40, 48
57, 58, 81
Onwa
Bell & Howell
06, 07, 08, 09, 54, 66,
Panasonic
Penney
Philco
(M.Wards)
67, 73, 74
Brocsonic
Candle
59, 60
18
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
Cetronic
Citizen
03
|
NOTE
|
15, 17, 18, 40, 48,
54, 62, 72
03, 18, 25
Philips
\ Make sure to match the “+” and “–” ends of the batteries
Cinema
Classic
97
Pioneer
Portland
Proton
63, 66, 80, 91
15, 18, 59
with the diagram inside the compartment.
03
\ Assuming typical TV usage, the batteries last for about
Concerto
Contec
18
40
one year.
46
Quasar
06, 66, 67
Coronado
Craig
15
\ The remote control can be used up to approximately 23
Radio Shack
17, 48, 56, 60, 61, 75
03, 05, 61, 82, 83, 84
feet (7 meters) from the product in a straight line.
18, 59, 67, 76, 77, 78,
RCA/Proscan
Croslex
Crown
62
03
92, 93, 94
Setting up the Remote Control
Realistic
03, 19
40
Curtis Mates
CXC
59, 61, 63
03
Sampo
You can control certain functions of your TV with
this remote control.
00, 15, 16, 17, 40, 43,
46, 47, 48, 49,
59, 60, 98
Samsung
02, 03, 04, 15, 16, 17,
18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28,
29, 30, 32, 34, 35, 36,
48, 59, 90
Daewoo
Sanyo
Scott
19, 61, 65
03, 40, 60, 61
15, 18, 19
To operate a TV with the Remote Control
1 . Press the TV button to set the remote control
Daytron
Dynasty
Emerson
40
03
Sears
Sharp
to TV mode.
15, 57, 64
03, 15, 40, 46, 59, 61,
Signature
2 . Turn on your TV.
64, 82, 83, 84, 85
2000
57, 58
(M.Wards)
3 . While holding down the POWER button,
enter the code corresponding to your brand
of TV.
Fisher
19, 65
03
Sony
Soundesign
Spectricon
SSS
50, 51, 52, 53, 55
Funai
03, 40
01
Futuretech
03
General
06, 40, 56, 59, 66,
• If there is more than one code listed for
your TV in the table, enter one at a time to
determine which code works.
Electric (GE)
67, 68
18
Hall Mark
Hitachi
Inkel
40
15, 18, 50, 59, 69
45
18, 40, 48, 54, 59,
Sylvania
60, 62
Symphonic
61, 95, 96
06
• Example : For a Samsung TV
JC Penny
JVC
56, 59, 67, 86
70
Tatung
While holding down the POWER button,
use the number buttons to enter 00. If that
does not work, try 15, then 16, etc.
Techwood
Teknika
TMK
18
KTV
59, 61, 87, 88
03, 15, 40
15
03, 15, 18, 25
18, 40
KEC
4 . If the TV turns off, the setting is complete.
KMC
Toshiba
Vidtech
Videch
19, 57, 63, 71
18
01, 15, 16, 17, 37,
38, 39, 40, 41, 42,
43, 44
• You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
LG (Goldstar)
59, 60, 69
15, 17, 18, 40, 48,
Luxman
LXI (Sears)
18
Wards
54, 60, 64
|
NOTE
|
19, 54, 56, 59, 60, 62,
Yamaha
18
40
63, 65, 71
\ The remote control may not work on some brands of TV's.
Also, some operations may not be possible, depending on
your brand of TV.
York
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
Magnavox
Yupiteru
Zenith
03
Marantz
Matsui
MGA
40, 54
54
58, 79
01
\ The remote control will work with Samsung TVs by
Zonda
18, 40
default.
Dongyang
03, 54
|
14
English
HT-E6500W_ZA_0315.indd 14
2012-03-15 오후 4:34:51
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit
If you attach a Toroidal ferrite core to the power cord of
SPEAKERS OUT
the main unit, it will help to prevent RF interference from
CENTER
FRONT
radio signals.
SUBWOO
AKE
WIRELESS
1. Pull the fixing tab of the Toroidal ferrite core to open
it.
2. Double loop the main unit power cord.
3. Attach the Toroidal ferrite core to the main unit power
cord as the figure shows and press it until it clicks.
Connecting the Speakers
Position of the product
Place it on a stand or cabinet shelf, or
under the TV stand.
Front (R)
Center
Subwoofer
Front (L)
Selecting the Listening Position
The listening position should be
located about 2.5 to 3 times the
TV's screen size away from the TV.
For example, if you have a 46 inch
screen, locate the listening position
115 to 138 inches (9.6 to11.5 feet)
from the screen.
Surround (R)
Product
Surround (L)
Wireless
Receiver Module
Place these speakers in front of your listening position, facing inwards (about 45°) toward
you. Place the front speakers so that their tweeters will be at the same height as your
ear. Align the front face of the front speakers with the front face of the center speaker or
place them slightly in front of the center speakers.
Front
Speakers
It is best to install the Center Speaker at the same height as the front speakers. You can
Center Speaker
also install it directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough room,
place these speakers so they face each other. Position them about 2 to 3 feet (60 to
90cm) above your ear, facing slightly downward.
Surround
Speakers
Unlike the front and center speakers, the surround speakers are used mainly for
*
sound effects. Sound will not come from them all the time.
The position of the subwoofer is not so critical. Place it anywhere you like.
Subwoofer
* Surround speakers must be connected to the wireless receiver module.
|
English
15
HT-E6500W_ZA_0315.indd 15
2012-03-15 오후 4:34:53
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Speaker Components
(L)
(R)
(L)
(R)
CENTER
FRONT
SURROUND
SUBWOOFER
SPEAKER CABLE
SWA-5000
Wireless Receiver Module
TX Card
Speaker Cable (2EA)
Connecting The Speakers
1. Match each speaker cable bundle to the correct speaker by matching the
color coded plug on each bundle to the colored sticker on the bottom of
each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire,
Black
and then release the tab.
Red
b. Press down the black tab on the back of the speaker, insert the black
wire, and then release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the
product by matching the colors of the speaker plugs to the colors of
the speaker jacks.
4. With the product turned off, insert the TX card into the TX Card
Connection (WIRELESS) on the back of the product.
• Hold the TX card so that the label "WIRELESS" faces upward and
insert the card into the port.
• The TX card enables communication between the product and the
wireless receiver module.
HDMI OUT
LAN
WIRELESS
5. Connect the left and right surround speakers to the wireless receiver
module. Again, match the color of the plugs to the jacks on the
wireless receiver module.
TX card
6. Plug the power cord of the wireless receiver module into a wall outlet.
7. Turn on the product. The product and wireless receiver module will
now communicate with each other and you will hear sound from the
Surround speakers.
|
16
English
HT-E6500W_ZA_0315.indd 16
2012-03-15 오후 4:34:55
Download from Www.Somanuals.com. All Manuals Search And Download.
Center Speaker
Subwoofer
SPEAKERS OUT
Front Speaker (L)
CENTER
FRONT
FRONT
SUBWOOFER
SPEAKER IMPEDANCE
:
3
Front Speaker (R)
SPEAKERS OUT
CENTER
FRONT
Surround
Surround
SUBWOOFER FRONT
SPEAKER IMPEDANCE
:
3
iPod
LAN
WIRELESS
Speaker (L)
Speaker (R)
Wireless Receiver Module
This product should be connected with the SWA-5000 only.
|
CAUTION
|
\
If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install.
However, when you install it, accessories (nails or screws) and installation is not provided by the company.
\
\
\
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole)
of the subwoofer speaker.
\
\
Do not hang the subwoofer on the wall using the duct (hole).
Do not insert any other card except the TX card dedicated to the product.
If you insert a different TX card, you can damage the product and may not be able to remove the card easily.
\
\
\
\
\
\
Do not insert the TX card upside down or in the reverse direction.
Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem.
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.
For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.
If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.
In 2-CH mode, you will hear no sound from the wireless surround speakers.
|
English
17
HT-E6500W_ZA_0315.indd 17
2012-03-15 오후 4:34:59
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
|
NOTE
|
\
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.
\
\
\
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound
from the speakers may be disrupted because of interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses the 2.4/5.8GHz
frequencies near the product, sound from the speakers may be disrupted because of interference.
The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on
your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system
may not operate at all, because the radio wave cannot penetrate metal.
\
If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the
product turned off, press "0"
"1" "3" "5" on the remote control. Turn on the wireless receiver module. Then, press and hold the “ID
SET” button on the back of the wireless receiver module for 5 seconds, and then turn the product on.
Connecting the FM Antenna
1 . Connect the FM antenna supplied to the FM
FM Antenna (supplied)
ANTENNA Jack.
2 . Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
AUX
IN
VIDEO
OUT
|
NOTE
|
FM ANT
\ This product does not receive AM broadcasts.
OPTICAL
DIGITAL
AUDIO IN
HDMI OUT
1
HDMI IN
2
Connecting to an iPod/iPhone
Using a USB Cable
Using a Dock
Connect an iPod/iPhone using the USB cable to
the front USB port.
To view a video from your iPod on your TV, you must
also connect the Video Out jack on the product to
the Video In jack on your TV. See page 19.
SPEAKERS OUT
AUX
IN
VIDEO
OUT
ASC IN
5V 500mA
CENTER
FRONT
FRONT
FM ANT
SUBWOOFER
OPTICAL
DIGITAL
AUDIO IN
SPEAKER IMPEDANCE
:
3
HDMI OUT
1
2
iPod
LAN
WIRELESS
HDMI IN
5V 500mA
iPod
|
NOTE
|
\ Make sure to connect the dock connector so that the label “” faces upward.
|
18
English
HT-E6500W_ZA_0315.indd 18
2012-03-15 오후 4:35:01
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV
Select either Method 1 or Method 2.
• If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control, and
then select the source the product is connected to (HDMI, Video In, etc.) to view video from the home theater.
AUX
IN
VIDEO
OUT
FM ANT
AUX
IN
VIDEO
OUT
SPEAKERS OUT
CENTER
FRONT
FRONT
FM ANT
SUBWOOFER
OPTICAL
DIGITAL
AUDIO IN
SPEAKER IMPEDANCE
:
3
iPod
LAN
WIRELESS
HDMI OUT
1
H
D
M
I
I
N
2
OPTICAL
DIGITAL
AUDIO IN
HDMI OUT
1
HDMI IN
2
(Cable not supplied.)
Method 2
Method 1
HDMI IN
VIDEO IN
Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
Method 2 Connecting to a TV with a Video Cable - Good Quality
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN
jack on your TV.
|
NOTE
|
\ The VIDEO Out jack always outputs in the 480i resolution regardless of the resolution set in the Setup menu.
\ Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and
the picture will be distorted on the television.
\ You can connect the product to your TV using both the HDMI and Video connections.simultaneously.
\ To view videos from an iPod connected to the product on your TV, you must connect the product to the TV using the Video
connection. If you connect the product to the TV using the Video connection, you can also connect the product to the TV
using the HDMI connection.
|
English
19
HT-E6500W_ZA_0315.indd 19
2012-03-15 오후 4:35:04
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,
the mode changes in this order : BD/DVD D. IN AUX R. IPOD HDMI1 HDMI2 FM
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Red
R
AUX
IN
VIDEO
OUT
White
W
FM ANT
SPEAKERS OUT
AUX
IN
VIDEO
OUT
CENTER
FRONT
FM ANT
OPTICAL
DIGITAL
AUDIN
SUBWOOFER
FRONT
OPTICAL
DIGITAL
AUDIO IN
SPEAKER IMPEDANCE
:
3
iPod
LAN
WIRELESS
HDMI OUT
1
H
D
M
I
I
N
2
1
HDMI IN
2
(Cable not supplied.)
Method 3
Method 2
Method 1
(Cable not supplied.)
(Cable not supplied.)
External Devices
HDMI OUT
OPTICAL OUT
AUDIO OUT
Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI
OUT jack on your digital device. Select the HDMI1 or HDMI2 mode.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device.
Select the D. IN mode.
Method 3 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analog component. Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
|
NOTE
|
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
|
20
English
HT-E6500W_ZA_0315.indd 20
2012-03-15 오후 4:35:05
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Network
Connecting to a Network Router
You can connect your product to your network
router using one of the methods illustrated below.
Wired Network
SPEAKERS OUT
AUX
IN
VIDEO
OUT
CENTER
FRONT
FM ANT
SUBWOOFER
FRONT
OPTICAL
DIGITAL
AUDIO IN
SPEAKER IMPEDANCE
:
3
LAN
WIRELESS
HDMI OUT
1
HDMI IN
2
Wireless IP sharer
Broadband modem
(with integrated router)
Broadband
Broadband
service
service
Or
Router
|
NOTE
|
\ If your wireless IP router supports DHCP, this product can
use a DHCP or static IP address to connect to the wireless
network.
Broadband
service
\ Set your wireless IP router to Infrastructure mode. Ad-hoc
Broadband
modem
mode is not supported.
\ The product supports only the following wireless security
key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK
|
NOTE
|
(TKIP/AES)
\ Internet access to Samsung’s Software Update server
may not be allowed, depending on the router you use or
your ISP’s policy. For more information, contact your ISP
(Internet Service Provider).
\ Select a channel on the wireless IP router that is not
currently being used. If the channel set for the wireless IP
router is currently being used by another device nearby, it
will result in interference and communication failure.
\ DSL users, please use a router to make a network
\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
or AP to WEP, TKIP or TKIP-AES (WPS2Mixed), the product
will not support a connection in compliance with new Wi-
Fi certification specifications.
connection.
\ To use the AllShare Play function, you must connect your
PC to your network as shown in the illustrations on the
left.
\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (AP performance,
distance, obstacles, interference by other radio devices,
etc).
The connection can be wired or wireless.
|
English
21
HT-E6500W_ZA_0315.indd 21
2012-03-15 오후 4:35:06
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
|
NOTE
|
The Initial Settings Procedure
\ The product starts the wireless network connection
procedure by default. If you want to set up a wired
connection, select Skip, and then go to "Configuring
Your Network Connection" on page 31 after you have
completed the Initial Settings Procedure.
• The Home menu will not appear if you do not configure
the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
\ If you skip wireless network setup here, go to "Wireless
Network" on page 32 to set up the product's wireless
network connection later.
• The access steps may differ depending on the menu
you selected.
1 . Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
5 . The product searches for and then displays
all available wireless router network
connections.
Initial Settings
>
Network Settings (2/5)
Initial Settings > On-Screen Language
Select a language for the on-screen
Select your wireless router from the list:
1
/
4
KIMING_VTOWER
Refresh
WPS(PBC)
Previous
Next
displays.
TIAS
▲
Select English as the
on-screen menu
language.
Dansk
Nederlands
Eesti keel
Français
Ελληνικά
Italiano
si-ap
English
Suomi
Deutsch
Magyar
Қазақ
surlwang5
Add Network
Next
Skip
한국어
▼
6 . Use the ▲▼ buttons to select a router, and
2 . Use the ▲▼◄► buttons on the remote
then press the
is highlighted.
button. The Next button
E
to select the desired language, and then
press the
button twice. The Start screen
E
7 . Press the
button to continue. The
E
appears.
Security Key screen appears.
3 . Press the
button to start setup. The
E
Network Settings screen appears.
|
NOTE
|
\ If you have a WPS(PBC) compatible router, select
Initial Settings
>
Network Settings (1/5)
WPS(PBC) instead, press the
button, and then follow
E
The next step is to set up a wireless network using an
internal LAN Adapter.
the directions on the screen. When done, go to Step 10.
Previous
Next
Skip
If you want to connect to your wired network, plug in a
network cable.
4 . Press the
button to set up the product's
E
wireless network connection or select
Skip, and then press the
button to skip
E
network setup. If you selected Skip, go to
Step 12.
|
22
English
HT-E6500W_ZA_0315.indd 22
2012-03-15 오후 4:35:10
Download from Www.Somanuals.com. All Manuals Search And Download.
11 . If there is a Software Update available,
the product downloads and installs the
upgrade. This can take some time. If there
is no Software Update available, the "There
are no new software updates for you to
download. You already have the most up
to date version." message appears. And
Initial Settings
>
Network Settings (4/5)
Enter security key.
0 entered
-
WPS PIN
Previous
Next
a
g
m
s
b
h
n
t
c
i
d
j
e
k
q
f
l
r
x
1
4
7
2
5
3
6
Skip
o
p
v
8
9
0
u
w
Space
y
z
then press the
button. The TV Aspect
E
A/a
Ratio screen appears.
Initial Settings
Set to match the type of television connected.
>
TV Aspect Ratio
8 . Enter your network's security key. When
done, use the ▲▼◄► buttons to select
Next, and then press the
button.
E
16:9 Original
16:9 Full
|
NOTE
|
Previous
Next
Select when connecting to a
4:3 Letter Box
4:3 Pan-Scan
16:9 TV Screen. All content
will be displayed at original
aspect ratio. Content
\ Enter numbers by pressing the number buttons on your
remote.
formatted in 4:3 will be
displayed with black bars on
left and right.
\ Enter letters by selecting a letter using the ▲▼◄►
buttons, and then pressing
button.
E
\ To display capital letters (or redisplay small letters if
capital letters are displayed), select A/a, and then press
12 . Using the ▲▼ buttons, select the aspect ratio
the
button.
E
that matches your TV screen, and then press
the
button. Select Next, and then press
E
E
\ To display symbols and punctuation, select , and then
the
button.
press the
button. To redisplay letters, select , and
E
then press the
button.
E
You have four choices:
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their original 16:9
format and 4:3 pictures (the old, standard
format) in 4:3 pillar box format with black bars
on the left and right.
9 . If the connection is successful, the
Connection Complete screen appears. Select
Next, and then press the
button. The
E
Software Update screen appears.
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their original 16:9
format and expands 4:3 pictures to fill the
16:9 screen.
|
NOTE
|
\ If the connection is not successful, select Next, and then
press the
button. After you have completed the Initial
E
Settings procedure, go to "Wireless Network" on page 32
4:3 Letter Box - For older, standard screen
analog TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in letter box format
that retains the 16:9 aspect ratio but puts
black bars above and below the picture.
to set up the product's wireless network connection.
10 . To upgrade the software, select Update
now, and then press the
button. To skip
E
the upgrade, select Update later, press the
button, and go to Step 12.
E
4:3 Pan-Scan - For older, standard screen
analog TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in Pan-Scan format
that fills the screen, but cuts off the left and
right sides of the picture and enlarges the
middle vertically.
|
NOTE
|
\ If you skipped network set up, you must skip Software
Update also.
|
English
23
HT-E6500W_ZA_0315.indd 23
2012-03-15 오후 4:35:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
The Home Screen
Initial Settings > Auto Sound Calibration
1/4
Connect the calibration microphone
to the ASC IN jack and set up all
speakers correctly as shown before
starting.
AllShare Play
Note: Please be aware that this
process outputs a loud test sound
that is needed for proper calibration.
Previous
Next
Play videos, photos, or music from Disc or connected devices.
Place Calibration Mic.
Here
Press Next to set the best speaker
3
4
5
Skip
output level.
User
2
1
Press Skip to configure later.
Smart Hub
Disc to Digital
Function
Settings
13 . The Auto Sound Calibration screen appears.
Plug the ASC microphone into the ASC IN
jack on the product.
Smart Hub. Starts Smart Hub. From Smart Hub,
you can access Netflix, Pandora, YouTube, games,
and other apps.
14 . Press the
button to select the Next
E
1
button. Setting the Auto Sound Calibration
function takes about 3 minutes. Select Next,
and then press the
button.
E
AllShare Play. Play videos, photos or music content
2
3
from Disc, USB, PC or mobile devices.
Initial Settings
>
Complete
Setup completed.
Disc to Digital. Upload DVD movies to your
personal Internet Disc to Digital repository. Once
movies are uploaded, they can be streamed to other
devices connected to the Internet.
On-Screen Language
Network Settings
Software Update
TV Aspect
Press Smart Hub to
enjoy variety of
Internet content.
OK
-
Smart Hub
Auto sound calibration
Function. Select the audio/video input source.
4
5
Settings. Set various functions to suit your personal
preferences.
15 . The Setup completed screen appears. Check
Selecting an Option on the Home Screen
the settings to confirm they are correct.
Select OK, and then press the
button.
E
1 . To select an option on the Home screen,
The Home screen appears.
move the cursor using the
buttons until it
◄►
highlights the option of your choice, and then
|
NOTE
|
press the E button.
\ If you want to display the Initial Setting screen again and
make changes, select the Reset option. (See page 30)
\ If you use an HDMI cable to connect the product to an
Anynet+ (HDMI-CEC)-compliant Samsung TV and 1.) You
have set the Anynet+ (HDMI-CEC) feature to ON in both
the TV and the product and 2.) You have set the TV to a
language supported by the product, the product will select
that language as the preferred language automatically.
|
24
English
HT-E6500W_ZA_0315.indd 24
2012-03-15 오후 4:35:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing the Settings Screen
E (Enter) / DIRECTION Button :
~ Press
to move the cursor or select
▲▼◄►
1 . Select Settings on the Home screen, and
an item.
3
then press
. The Settings screen appears.
E
~ Press the E button to activate the currently
selected item or confirm a setting.
3D Settings
Display
Audio
TV Aspect Ratio
Smart Hub Screen Size
BD Wise
16:9 Original
Size 3
Off
EXIT Button : Press to exit the current menu.
4
Resolution
Auto
Network
System
Support
|
NOTE
|
Movie Frame (24Fs)
HDMI Color Format
HDMI Deep Color
Progressive Mode
Auto
Auto
\ The E button on the product's front panel can be
used for same purpose as the E button on the remote
control.
Auto
Auto
Detailed Function Information
2 . To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◄► buttons to select the
function, menu item, or option.
|
NOTE
|
The explanation will usually appear on the right of
the screen. A short description of each Settings
function starts on the next page. Additional
information on some of the functions is also in the
Appendix of this manual.
\ If you leave the product in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the product is left in the screen saver mode for
more than 20 minutes, the power will automatically turn
off.
Buttons on the Remote Control Used
for the Settings Menu
TUNING
S/W LEVEL
VOL
/
CH
HOME
REPEAT
1
2
TOOLS
INFO
3
4
RETURN
A
EXIT
TUNER
MEMORY
MO/ST
B
C
D
HOME Button : Press to move to the Home screen.
1
RETURN Button : Return to the previous menu.
2
|
English
25
HT-E6500W_ZA_0315.indd 25
2012-03-15 오후 4:35:17
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Settings Menu Functions
Display
Set up the 3D related functions.
3D Blu-ray Playback Mode: Select whether to play a Blu-
ray Disc with 3D contents in 3D Mode. If you move to the
Home or Smart Hub Home menu while in 3D mode, the
product will switch to 2D automatically.
3D Settings
Screen Size: Enter the size of the TV attached to the
product. The product will automatically adjust the 3D output
to the screen size of the TV.
Lets you adjust the output of the product to the screen size of
your TV. See page 23, Step 12 for a description of the screen
size options.
TV Aspect
Ratio
Smart Hub
Lets you select the optimal size for the Smart Hub Screen.
Screen Size
BD Wise is Samsung’s latest inter-connectivity feature.
When you connect a Samsung product and a Samsung TV
with BD Wise to each other via HDMI, and BD Wise is on in
both the product and TV, the product outputs video at the
video resolution and frame rate of the Blu-ray/DVD Disc.
BD Wise
Lets you set the output resolution of the HDMI video signal to
Auto, 1080p, 1080i, 720p, 480p. If Composite is connected,
the resolution supports only 480i. The number indicates
the number of lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively. The more lines,
the higher quality.
Resolution
Setting the Movie Frame (24Fs) feature to Auto lets the product
adjust its HDMI output to 24 frames per second automatically
for improved picture quality if attached to a 24Fs compatible
TV.
Movie Frame
(24Fs)
• You can enjoy the Movie Frame (24Fs) feature only on a TV
supporting this frame rate.
• Movie Frame is only available when the product is in the
HDMI 1080i or 1080p output resolution modes.
HDMI Color
Format
Lets you set the color space format for the HDMI output to match
the capabilities of the connected device (TV, monitor, etc).
Lets you set the product to output video from the HDMI OUT
jack with Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
HDMI Deep
Color
Progressive
Mode
Lets you improve picture quality when viewing DVDs.
|
26
English
HT-E6500W_ZA_0315.indd 26
2012-03-15 오후 4:35:24
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio
Speaker
Settings
You can set the speaker options.
Auto Sound
The product automatically creates a sound field optimized for
your environment. See page 31.
Calibration
Equalizer
Lets you configure the Equalizer settings manually.
Lets you set the product so that the volume remains stable
when a scene change occurs or when you change the
channel.
Smart Volume
Speaker
Lets you select which speakers you want active, either the
TV's speakers or the Home theater's speakers.
Selection
Lets you direct the sound from the TV to the Home Theater
speakers. Requires an HDMI connection and an Audio Return
Channel (ARC) compatible TV.
• If Audio Return Channel is set to on and you are using an
HDMI cable to connect the product to the TV, digital optical
input will not work.
Audio Return
Channel
• If Audio Return Channel is set to auto and you are using an
HDMI cable to connect the product to the TV, ARC and
digital optical input are selected automatically.
Lets you set the Digital Output to match the capabilities of the
AV receiver you’ve connected to the product. For more details,
please refer to the digital output selection table. (See page 60)
Digital Output
Lets you apply dynamic range control to Dolby Digital, Dolby
Digital Plus, and Dolby True HD audio.
Auto: Automatically controls the dynamic range of Dolby
TrueHD audio, based on information in the Dolby TrueHD
soundtrack. Also turns dynamic range control on for Dolby
Digital and Dolby Digital Plus.
Dynamic
Range Control
Off: Leaves the dynamic range uncompressed, letting you
hear the original sound.
On: Turns dynamic range control on for all three Dolby
formats. Quieter sounds are made louder and the volume of
loud sounds is reduced.
When the product is attached to a digital TV, lets you adjust
the audio delay so that the audio syncs with the video. You
can set the delay between 0 and 300 milliseconds.
Audio Sync
|
English
27
HT-E6500W_ZA_0315.indd 27
2012-03-15 오후 4:35:25
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Network
For more information about Network Settings and network
Network
Settings
functions, see "Networks and the Internet" starting on page
31.
Network
Lets you check whether a connection to the network and the
Internet have been established.
Status
Lets you connect a Wi-Fi Direct device to the product using a
Peer-to-Peer network, without a wireless router. You can use
the device to control the product.
Wi-Fi Direct
Soft AP
Lets you connect other types of Wi-Fi devices to the product
wirelessly. Requires that you create a security key which
you must enter into the other Wi-Fi devices when you are
connecting them to the network.
Lets you permit external devices such as smart phones to
connect to the product and share content with or control the
product.
AllShare
Settings
Lets you assign an identifying name to the product. You use
this name to identify the product when you are connecting
external Wi-Fi devices (smart phones, tablets, etc.) to it.
Device Name
BD-Live
Settings
Lets you allow, limit, or prohibit an Internet connection for the
BD-Live service.
Lets you select your default Disc to Digital application after
you have downloaded it. For more information about Disc to
Digital, see page 53.
Disc to Digital
App
| NOTE |
\ Disc to Digital lets you upload DVD movies to your own personal, Internet
Disc to Digital repository and then stream them in HD format to other
Internet connected devices.
|
28
English
HT-E6500W_ZA_0315.indd 28
2012-03-15 오후 4:35:25
Download from Www.Somanuals.com. All Manuals Search And Download.
System
Lets you re-run the Initial Settings procedure. See page 22 for
details.
Initial Settings
You can connect a wireless USB keyboard or mouse to
the USB port on the front of the product.
Keyboard Settings: Lets you configure a wireless USB
keyboard connected to the product.
| NOTE |
\ You can use the keyboard only when a QWERTY keyboard screen or
window appears in the Web Browser.
Mouse Settings: Lets you configure a wireless USB mouse
connected to the product. You can use the mouse in the
product's menu in the same way you use a mouse on your
PC.
To use a mouse with the product's menu:
Device
1 . Connect the USB mouse to the product
.
Manager
2 . Click the primary button you selected in Mouse Settings.
The Simple Menu appears.
3 . Click the menu options you want.
| NOTE |
\ Depending on the model of the USB HID keyboard and mouse may not
be compatible with your product.
\ Some HID keyboard keys may not work.
\ Wired USB keyboards are not supported.
\ Some applications may not be supported.
\ If a wireless HID Keyboard does not operate because of interference,
move the keyboard closer to the product.
nynet+ is a convenient function that offers linked operations
with other Samsung products that have the Anynet+ feature
and lets you control those products with one Samsung TV
remote. To operate this function, you must connect this
product to an Anynet+ Samsung TV using an HDMI cable.
Anynet+
(HDMI-CEC
You can select the language you prefer for the On-Screen
menu, disc menu, subtitles, etc.
Language
• The language you select for the disc menu, disc audio, or
subtitles will only appear if it is supported on the disc.
|
English
29
HT-E6500W_ZA_0315.indd 29
2012-03-15 오후 4:35:26
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
The default PIN is 0000. Enter the default PIN to access the
security function if you haven't created your own PIN.
BD Parental Rating: Prevents playback of Blu-ray Discs
with a rating equal to or above a specific age rating you
enter unless the PIN is entered.
DVD Parental Rating: Prevents playback of DVDs with a
rating above a specific numerical rating you select unless
the PIN is entered.
Change PIN: Change the 4-digit PIN used to access
Security
security functions.
If you forget your PIN
1 . Remove any disc or USB storage device.
2 . Press and hold the 5 button on the front panel for 5
seconds or more.
All settings will revert to the factory settings.
| NOTE |
\ When the factory default settings are restored, all the user stored BD
data will be deleted.
You can specify the display brightness and time zone.
Front Display: Lets you change the brightness of the front
panel.
General
Time Zone: You can specify the time zone that is applicable
to your area.
Menu Transparency: Adjust the transparency of the menu
box.
Support
For more information about the Software Update function, see
"Upgrading Software" on page 36.
Software Update
Contact
Provides contact information for assistance with your product.
Samsung
When activated, lets Samsung Call Center agents diagnose and
fix problems with the product remotely. Requires an active Internet
connection. Remote Management service might not be available in
some countries.
Remote
Management
All settings will revert to the default except for the network
Reset
and Smart Hub settings. The default security password is 0000.
|
30
English
HT-E6500W_ZA_0315.indd 30
2012-03-15 오후 4:35:26
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Sound Calibration
Networks and the Internet
By running the Auto Sound Calibration (ASC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 5.1-channel sound field optimized for
your environment.
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
51~54. Instructions for configuring the network
connection start below.
ASC IN
5V 500mA
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
ASC
microphone
If you are connecting to a wired network, connect
the product to your router using a LAN cable
before you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.
Auto Sound Calibration Mode
To begin configuring your network connection,
After you have run the Auto Sound Calibration
function, turn on the Auto Sound Calibration Mode
to listen to the calibrated sound.
follow these steps:
1 . In the Home screen, select Settings, and
• Off: Listen to uncalibrated audio.
then press the
button.
E
• On: Listen to calibrated audio, optimized for
2 . Select Network, and then press the
E
your environment.
button.
3 . Select Network Settings, and then press the
Running Auto Sound Calibration
button.
E
To run the Auto Sound Calibration function, follow
these steps:
4 . Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks starting on page 32.
1 . Plug the ASC microphone into the ASC IN
jack.
Wired Network
2 . Place the ASC microphone at the listening
position.
• Auto Sound Calibration runs automatically
in the following sequence: Front L
Front R Center Surround L
Surround R Subwoofer
K
Wired – Automatic
After following Steps 1 to 3 above:
1 . Select Start in the Network Settings screen,
• To exit the Auto Sound Calibration function,
and then press the
button. The product
E
press the left arrow button ( ).
◄
detects the wired connection, verifies the
network connection and then connects to the
network.
• To cancel the Auto Sound Calibration
(
)
Setting, press the RETURN ' button.
|
English
31
HT-E6500W_ZA_0315.indd 31
2012-03-15 오후 4:35:27
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
K
< Getting the Network Settings Values >
Wired - Manual
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
• In Windows XP
After following Steps 1 to 3 above:
1 . Right click the Network icon on the bottom
1 . Select Start in the Network Settings screen,
right of the Windows desktop.
and then press the
button. The Network
E
Status screen appears. The product attempts
2 . In the pop-up menu, click Status.
to verify the network connection and fails.
3 . On the dialog that appears, click the Support
tab.
Network Settings
4 . On the Support tab, click the Details button.
Wired network connection failed.
5 . The Network settings are displayed.
MAC Address
IP Address
Subnet Mask
Gateway
XX:XX:XX:XX:XX:XX
0.0.0.0
Previous
IP Settings
Retry
• In Windows 7
0.0.0.0
0.0.0.0
DNS Server
0.0.0.0
1 . Click the Network icon on the bottom right of
Unable to connect to the network. Try the following:
check if your IP address is set correctly in IP Settings.
Contact your Internet Service Provider for more information.
OK
the Windows desktop.
2 . In the pop-up menu, click Network and
Sharing Center.
3 . On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
2 . Select IP Settings on the right of the screen,
and then press
button.
E
The IP Settings screen appears.
3 . Select the IP Mode field, and then set it to
4 . On the Support tab, click the Details button.
Manual.
The Network settings are displayed.
4 . Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
|
NOTE
|
\ Depending on your Windows version, the information may
differ.
|
NOTE
|
Wireless Network
\ You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on this page.
You can setup a wireless network connection in
three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
5 . When done, highlight OK, and then press
button. The product verifies the network
E
connection and then connects to the
When you configure the wireless network
connection, any wireless network devices currently
connected through the product or, if applicable,
the product's current wired connection, will be
disconnected.
network.
|
32
English
HT-E6500W_ZA_0315.indd 32
2012-03-15 오후 4:35:28
Download from Www.Somanuals.com. All Manuals Search And Download.
K
1 . Select Start in the Network Settings screen,
Wireless (General) - Automatic
and then press the
button. The product
E
After following Steps 1 to 3 in "Configuring Your
searches for and then displays a list of the
Network Connection" on page 31:
available networks.
1 . Select Start in the Network Settings screen,
2 . Select the desired network or Add Network,
and then press the
button.
E
and then press the
button.
E
The product searches for and then displays a
3 . Select Next, and then press the
button
E
list of the available networks.
again.
4 . If you selected a network in Step 2, go to
Step 7. If you selected Add Network, go to
Step 5.
Network Settings
Select your wireless router from the list:
1/10
5 . Enter your wireless network or wireless
iptime23
Refresh
ELT
router's name.
WPS(PBC)
JSY
Previous
• Enter numbers directly using the number
buttons on your remote control.
KT_WLAN_C361
Next
Mirhenge_edu
Cancel
• Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the
SO070VOIP
button.
E
• To display capital letters (or redisplay small
letters if capital letters are displayed), select
2 . Select the desired network, and then press
the
button.
E
A/a, and then press the
button.
E
3 . Select Next, and then press the
button
E
• To display symbols and punctuation, select
again.
, and then press the
button. To
E
4 . On the Security screen, enter your network's
redisplay letters, select , and then press
Security Code or Pass Phrase.
the
button.
E
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
When done, select Next, and then press the
button.
E
6 . Select the Security Type, select Next, and
then pressing
button.
E
then press the
button.
E
5 . When done, select Next at the right of the
screen. The product verifies the network
connection and then connects to the
network.
7 . On the Security screen, enter your network's
Security Code or Pass Phrase.
• Enter numbers directly using the number
buttons on your remote control.
|
NOTE
|
• Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the
\ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
button.
E
8 . When done, select Next at the right of the
screen, and then press the
button.
E
K
Wireless (General) - Manual
9 . The Network Status screen appears.
The product attempts to verify the network
connection and fails.
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
10 . Select IP Settings on the right of the screen,
and press the
button. The IP Settings
E
After folloiwng Steps 1 to 3 in "Configuring Your
Network Connection" on page 31:
screen appears.
|
English
33
HT-E6500W_ZA_0315.indd 33
2012-03-15 오후 4:35:29
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
11 . Select the IP Mode field, and then set it to
12 . Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
Wi-Fi Direct
Manual.
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the product and each other
using a peer-to-peer network, without a wireless
router.
1 . Turn on the Wi-Fi direct device and activate
|
NOTE
|
its Wi-Fi Direct function.
\ You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 32.
2 . In the Home screen, select Settings, and
then press the
button.
E
3 . Select Network, and then press the
E
button.
13 . When done, highlight OK, and then press
E
4 . Select Wi-Fi Direct, and then press the
E
button. The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it
button.
The Wi-Fi Direct devices that you can
connect appear.
is done, highlight OK, and then press
E
button.
Wi-Fi Direct
Device Name : [HTS]E6500W
K
WPS(PBC)
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Disconnected
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a WPS(PBC)
button, follow these steps:
Refresh
Close
After following Steps 1 to 3 in "Configuring Your
m
Move
"
Enter
'
Return
Network Connection" on page 31:
1 . Select Start in the Network Settings screen,
5 . You have three ways to complete the Wi-Fi
and then press the
button.
E
connection:
• Through the Wi-Fi device.
Network Settings
• Through the product using PBC.
• Through the product using a PIN.
Select your wireless router from the list:
1/10
iptime23
ELT
Refresh
WPS(PBC)
Previous
Next
Each is covered below.
JSY
KT_WLAN_C361
Mirhenge_edu
SO070VOIP
Through the Wi-Fi Device
Cancel
1 . On the Wi-Fi device, follow the devices
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
2 . Select WPS(PBC), and then press the
E
button.
2 . When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
3 . Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network.
Direct has requested to connect. Select OK,
and then press the
button to accept.
E
3 . The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
|
34
English
HT-E6500W_ZA_0315.indd 34
2012-03-15 오후 4:35:30
Download from Www.Somanuals.com. All Manuals Search And Download.
Through the Product Using PBC
< To Set the Soft AP Security Key >
1 . On the Soft AP screen, select Security Key,
1 . Select the Wi-Fi Direct device you want to
and then press the
button. The Security
E
connect to this product, and then press the
Key screen appears.
button. The PBC/PIN pop up appears.
E
2 . On the Security key screen, enter a security
key. Enter numbers directly using the number
buttons on your remote control. Enter
2 . Select PBC, and then press the
button.
E
The PBC pop-up appears.
3 . Press the PBC button on the Wi-Fi Direct
letters by selecting a letter with the ▲▼◄►
device within 2 minutes.
buttons, and then pressing the
button.
E
4 . The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
3 . When done, use the ▲▼◄► buttons to
move to DONE at the bottom of the screen,
and then press the
button.
E
When you connect a Wi-Fi device through the
connection procedure on the device, you must
enter the security key you created here into the
appropriate field.
Through the Product Using a PIN
1 . Select the Wi-Fi Direct device you want to
connect to this product, and then press the
button. The PBC/PIN pop up appears.
E
AllShare Settings
2 . Select PIN, and then press the
button.
E
The PIN pop-up appears.
The AllShare Settings screen lists your network
connected AllShare devices and their IP
3 . Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
addresses. Through this screen, you can allow
a device to access the product, deny access, or
delete the device from the AllShare list.
4 . The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
1 . In the Home screen, select Settings, and
then press the
button.
E
2 . Select Network, and then press the
E
|
NOTE
|
button.
\ The wired or wireless network connection will be
3 . Select AllShare Settings, and then press the
disconnected when you use the Wi-Fi Direct function.
button.
E
4 . Select a device, and then press the
E
Soft AP
button. The AllShare Settings pop-up
appears.
Soft AP lets you connect other Wi-Fi devices to
your network through the product and lets them
access the Internet.
5 . Select Allow, Deny, or Delete from List, and
then press the
button.
E
It requires that you create a security key which you
must enter into the other Wi-Fi devices when you
are connecting them to the network.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see pages 38~39.
1 . In the Home screen, select Settings, and
then press the
button.
E
2 . Select Network, and then press the
E
button.
3 . Select Soft AP, and then press the
E
button.
4 . Select On or Off, and then press the
E
button.
|
English
35
HT-E6500W_ZA_0315.indd 35
2012-03-15 오후 4:35:36
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
4 . If you select Update now, the product
upgrades the software, turns off, and then
turns on automatically.
Upgrading Software
The Software Update menu allows you to
upgrade the product’s software for performance
improvements or additional services.
5 . If you do not make a selection in one minute
or select Update later, the product stores
the new upgrade software. You can upgrade
the software later using the By downloaded
function.
• Never turn the product off or back on manually during
the update process.
6 . If you select Don’t update, the product
1 . In the Home menu, select Settings, and then
cancels the upgrade.
press the
button.
E
2 . Select Support, and then press the
E
By USB
button.
3 . Select Software Update, and then press the
button.
E
2 . Click SUPPORT on the top right of the page.
4 . Select one of the following methods:
3 . Enter the product's model number into the
• Online
search field, and then click Find Product.
• By USB
4 . Click Get downloads in the center of the
• By Disc
page below the Downloads header.
• By downloaded
• Standby Mode Upgrade
5 . Click Firmware in the center of the page.
6 . Click the ZIP icon in the File column on the
right side of the page.
5 . Press the
button.
E
7 . Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
Directions for each method begin below.
|
NOTE
|
\ The upgrade is complete when the product turns off, and
8 . Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
then turns on again by itself.
\
Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a Software Update.
9 . Copy the folder to a USB flash drive.
10 . Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
\ If you want to cancel the upgrade while the upgrade
software is downloading, press the
button.
E
11 . In the product’s menu, go to Settings >
Online
Support > Software Update.
Your product must be connected to the Internet to
use the Online function.
12 . Select By USB.
|
NOTE
|
1 . Select Online, and then press the
button.
E
\ There should be no disc in the product when you upgrade
The Connecting to Server message appears.
the software using the USB Host jack.
2 . If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
\ When the Software Update is done, check the software
details in the Software Update menu.
\ Do not turn off the product during the Software Update. It
3 . When the download is complete, the
Upgrade Query window appears with three
choices: Update now, Update later or
Don’t update.
may cause the product to malfunction.
\ Software Updates using the USB Host jack must be
performed with a USB flash memory stick only.
|
36
English
HT-E6500W_ZA_0315.indd 36
2012-03-15 오후 4:35:36
Download from Www.Somanuals.com. All Manuals Search And Download.
4 . When the update is complete, the product
By Disc
turns off automatically, and then turns on.
|
NOTE
|
2 . Click SUPPORT on the top right of the page.
\ When the system upgrade is done, check the software
3 . Enter the product's model number into the
details in the Software Update menu.
search field, and then click Find Product.
\ Do not turn off the product during the Software Update. It
4 . Click Get downloads in the center of the
may cause the product to malfunction.
page below the Downloads header.
Standby Mode Upgrade
5 . Click Firmware in the center of the page.
6 . Click the ZIP icon in the File column on the
You can set the Standby Mode Upgrade function
so that the product downloads new upgrade
software when it is in Standby mode.
right side of the page.
7 . Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
In Standby mode, the product is off, but its
Internet connection is active. This allows
the product to download upgrade software
automatically, when you are not using it.
8 . Unzip the zip archive to your computer. You
should have a single .RUF file.
9 . Write the RUF file onto a disc. We
1 . Press the ▲▼ buttons to select Standby
recommend a CD-R or DVD-R.
Mode Upgrade, and then press the
E
button.
10 . Finalize the disc before you remove it from
your computer.
2 . Select On or Off.
If you select On, the product will automatically
download new upgrade software when it
is in Standby mode with the power off. If
it downloads new upgrade software, the
product will ask you if you want to install it
when you turn the product on.
11 . Insert the disc into the product.
12 . In the product’s menu, go to Settings >
Support > Software Update.
13 . Select By Disc.
|
NOTE
|
|
NOTE
|
\ When the system upgrade is done, check the software
details in the Software Update menu.
\ To use Standby Mode Upgrade function, your product
must be connected to the Internet.
\ Do not turn off the product during the Software Update.
It may cause the product malfunction.
\ If this function does not appear, you can upgrade to the
latest software and use it.
By downloaded
The By downloaded option lets you upgrade using
a file the product downloaded earlier but you
decided not to install immediately.
1 . If upgrade software has been downloaded,
you will see the software version number to
the right of By downloaded.
2 . Select By downloaded, and then press the
button.
E
3 . The product displays a message asking if you
want to upgrade. Select Yes. The product
begins the upgrade.
|
English
37
HT-E6500W_ZA_0315.indd 37
2012-03-15 오후 4:35:37
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Your Blu-ray product can play Disc and USB
contents and the contents located on your PC,
DLNA compatible mobile phone, or NAS using the
AllShare Play function. For more information about
AllShare Play, refer to page 41.
• Use the ◄► buttons to select an item, press
the TOOLS button to display the Tools menu,
select Play, and then press the
button. To
E
view or play another item, press the RETURN
(
)
' button, and then repeat the process
described in the first sentence.
K
Playing Video, Photo, or Music Content
The AllShare Play Screen
1 . Make sure that the source of the content
you want to play or view is connected to or
inserted into the product.
To access the AllShare Play screen, select the
AllShare Play icon on the Main screen, and then
press the
button.
E
2 . Use the ▲▼ buttons to select Videos,
Photos, or Music, and then press the
side is highlighted.
E
Using the AllShare Play Screen
button. The first source selection on the right
My List
/
/
AllShare Play
My List
3 . Use the ▲▼ buttons to select the source of
Latest play
Recently played files will be displayed here.
the content, and then press the
|
button.
E
Videos
Photos
Music
|
NOTE
What's New
Recently Updated 09.Jan.2012
View More
\ Sources displayed for each content type may differ.
SAM_0001
Playlist
SAM_0002
SAM_0003
SAM_0004
SAM_0005
4 . To control the playing of Videos, Photos, or
No playlists have been created.
Create
a
playlist to quickly and easily access your content.
Music, see:
• Controlling Video Playback on page 43.
• Controlling Music Playback on page 45.
Login
'
Return
a
When the AllShare Play screen appears, it displays
My List and a list of content types - Videos,
Photos, and Music - on the left side. On the right,
it displays, by default, the content in My List: a
list of recently played or viewed items, a list of the
newest items you have viewed or listened to, and
your most recent Playlist. If you have never played
or viewed any items, or created a Playlist, this area
will be empty.
• Playing Photo Contents and Using the Tools
Menu when a File is Highlighted on pages
46~49.
|
NOTE
|
\ Depending on how and when you attach a content source
to the product and the content type, the product may
display a different series of screens to start playback.
For alternative playback methods see:
K
• Playing Files on a USB Storage Device or iPod/iPhone
Playing My List Items
on page 39.
To play displayed My List items, you must have
the source of the items connected to or inserted
in the product. For example, if recently played My
List photos came from a DVD disc, you must have
that disc in the product to view them.
• Playing Commercial Video Discs on page 40.
• Playing Commercial Audio Discs on page 40.
•
Playing a Disc with User Recorded Content on page 41.
To play or view My List items, perform one of the
actions below:
• Use the ◄► buttons to select an item you
want to view or play, and then press the
E
button. To view or play another item, press
(
)
the RETURN ' button, and then repeat the
process described in the first sentence.
|
38
English
HT-E6500W_ZA_0315.indd 38
2012-03-15 오후 4:35:39
Download from Www.Somanuals.com. All Manuals Search And Download.
3 . The kind of content you selected on the
connected device is displayed. Depending
on how the contents is arranged, you will see
either folders, individual files, or both.
Playing Files on a USB Storage
Device or iPod/iPhone
You can play multimedia files located on a
4 . Using the
buttons on your remote,
connected USB device.
▲▼◄►
select the desired contents. To open a folder,
1 . With the product turned off, connect a USB
select it, and then press the
button.
E
storage device or an iPod/iPhone.
To play a file, select it, and then press the
button.
E
2 . Turn on the product. When the Main screen
appears, select AllShare Play > Videos,
Photos or Music > Connected Device, and
(
)
5 . Press the RETURN ' button to exit a folder
or to return to the Main screen.
then press the
button.
E
|
CAUTION
|
\ You can only play videos from an iPod when you use the
AllShare Play
Play videos, photos, or music from Disc or connected devices.
iPod Dock.
|
NOTE
|
\ To prevent possible damage to the USB memory, you
must remove the USB storage device safely using the
“Safely Remove USB” function. Press the HOME button
to move to the Home menu, select the YELLOW (C)
Smart Hub
Disc to Digital
Function
Settings
Disc to Digital FAQs
Safely Remove USB
b
c
button, and then press the
button.
E
\ The Photos menu does not support iPods or iPhones.
OR
-1
\
Only the playback screen will appear on the TV. View other
iPod screens on the iPod player.
1 . With the product turned on, connect a USB
storage device or an iPod/iPhone.
-1
\
If the connected iPod does not support video playback, the
"Playing video files is not supported on this iPod model."
message appears when you select the Video menu.
2 . When screen below appears, use the ▲▼
buttons to select the kind of content you
want to view or play, and then press the
E
button.
iPod/iPhone Models You Can Use
with This Product
New device connected.
, photos, or music from Disc or connect
USB DISK
Videos
Photos
Music
iPod touch 3rd/2nd/1st generation
iPod classic / iPod with video
iPod with dock connector
'
Return
iPod with Click Wheel
iPod nano 5th/4th/3rd/2nd generation
iPhone 4S / iPhone 4
Disc to Di"Enter Function
Disc to Digital FAQs
Safely Remove USB
b
c
iPhone 3GS / iPhone 3G / iPhone
|
NOTE
|
\ Even though the product will display all available folders,
it will only display files of the content type you selected
in Step 2 or 2-1. For example, if you selected music, you
will only be able to see music files. You can change this
selection using AllShare Play.
|
English
39
HT-E6500W_ZA_0315.indd 39
2012-03-15 오후 4:35:43
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
The Function Screen
Playing Commercial Audio Discs
On the Function Screen, you can select the audio
1 . Place a pre-recorded, commercial audio disc
into the disc tray with the disc’s label facing up,
and then close the tray. The AllShare Play Music
screen appears listing the tracks. Playback of
the first track starts automatically.
and/or video input source to view or listen to.
|
NOTE
|
\
You can also change sources by pressing the Function button
in the upper right of the remote.
1
/
17
/ Music /
Audio CD
AllShare Play
►
To access the Function Screen, select the
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
TRACK 009
TRACK 010
04:24
04:01
04:26
05:07
04:47
03:59
04:34
04:02
Function icon on the Main screen, and then press
the
button.
E
٭ TRACK 001
Options on the Function Screen
00:00
/
03:59
To select, highlight an option using the ▲▼
buttons, and then press the
button.
E
Page Move
/
Tools
'
Return
bc
Select to listen to the digital audio
2 . To play a particular track, use the ▲▼ buttons
Digital In
AUX
source connected to Digital Audio In.
on the remote to select the track, and then
press the
button.
E
Select to listen to audio from the
analog audio source connected to
Audio In.
Select to listen to music or view video
from the iPod connected to the iPod
jack.
K
Music Screen Controls
Pause a track.
Play a track.
Repeat one track or all tracks.
Play tracks in random order.
Display the Equalizer.
Remote iPod
HDMI IN 1
Select to view video from the device
connected to HDMI IN 1.
Select to view video from the device
connected to HDMI IN 2.
Select to listen to the FM radio.
HDMI IN 2
Tuner
Adjust the equalizer manually.
(Only when equalizer mode is On)
Playing Commercial Video Discs
|
NOTE
|
\
The Music Screen controls are only accessible when a track
1 . Place a disc into the disc tray with the disc’s
label facing up and then close the disc tray.
Playback starts automatically.
is playing.
\
\
All controls do not appear at the same time.
If playback does not start automatically, press
For more information about playing music, go to "Controlling
the
button on your remote or select the
6
Music Playback" on page 45.
AllShare Play option on the Main screen,
and then press the button. See "Playing
E
Video, Photo, or Music Content" on page 38.
|
40
English
HT-E6500W_ZA_0315.indd 40
2012-03-15 오후 4:35:52
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Disc with User Recorded
Content
Using the AllShare Network
Function
You can play multimedia files you have recorded
AllShare lets you play Videos, Photos, or Music
located on your PC or your DLNA compatible
device through the product using a wireless
network connection.
on DVD or CD discs.
1 . Place a user recorded disc into the disc
tray with the disc’s label facing up, and then
close the tray. The Device Connected pop-up
appears.
To Download the AllShare Software
To use AllShare with your PC or DLNA device, you
must install AllShare software on your PC.
2 . Use the ▲▼ buttons to select the type of
content you want to view or play - Videos,
You can download the PC software and get
detailed instructions for using AllShare from the
Samsung.com website.
Photos, or Music - and then press the
E
button.
|
NOTE
|
\
Even though the product will display folders for all content
types, it will only display files of the content type you selected
in Step 2. For example, if you selected music, you will only
be able to see music files. You can change this selection
using AllShare Play.
2 . Click Support at the top of the page.
3 . On the Support page, enter the model
number of your product into the Model
Number field.
4 . On the page that appears, click Get
downloads on the left side under Downloads.
The Download Center appears.
3 . Use the ▲▼◄► buttons to select the folder
containing the content type you selected in Step
2, and then press the
button.
E
5 . On the Download Center page, click the
4 . If you selected Music, the AllShare Play Music
screen appears listing the music files on the
disc. Use the ▲▼ buttons to select the file you
Software tab.
6 . On the software tab, click the File icon on the
right side of the AllShare line.
want to play, and then press the
button.
E
7 . In the pop-up that appears, click Save File.
5 . If you selected Photos, the AllShare Play Photos
screen appears listing the photos on the disc.
Use the ▲▼◄► buttons to select the photo you
8 . Find the AllShare install file on your disk, and
then double click the file.
want to view, and then press the
button.
E
9 . In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
6 . If you selected Videos, the AllShare Play Videos
screen appears listing the video files on the disc.
Use the ▲▼◄► buttons to select the video you
Download the AllShare Installation/Instruction
manual from the same Software Tab by clicking
the corresponding PDF file symbol in the File
column on the right. The file, in PDF format, will
download and open. You can view and/or save
the file.
want to watch, and then press the
button.
E
|
NOTE
|
\
For the Music and Video folders, you can also push the
TOOLS button on your remote, and then select Play Folder to
play or view all the files in the folder automatically. Select the
folder first before pushing the TOOLS button.
\
\
For more information about playing music, go to Controlling
Music Playback on page 45.
For more information about playing photo contents, go to
Playing Photo Contents and Using the Tools Menu when a
File is Highlighted on pages 46~49.
\
For more information about playing video contents, go to
Controlling Video Playback on page 43.
|
English
41
HT-E6500W_ZA_0315.indd 41
2012-03-15 오후 4:35:57
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Playing Content Located on Your PC or
Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
DLNA Device through the Product
PC
Product
PC
Product
Play back
PC's files
Play back
PC's files
AllShare Connection
AllShare
Control PC's files to
Product
Connection
1 . Connect the product, your PC, and/or your
DLNA compatible cell phone to the same
wireless network.
Smart Phone
(Only available with Samsung phones supporting
2 . Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
AllShare functionality.)
1 . Connect the product, your PC, and your
DLNA compatible cell phone to the same
wireless network.
3 . Select AllShare Play in the product's Home
screen, and then press the
button. The
E
AllShare Play screen appears.
2 . Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
4 . Select the connected DLNA compatible
device or your PC, and then press the
E
button. A screen listing the available files
3 . On your computer, using the AllShare
appears.
software, confirm your phone is connected.
5 . Select the file you want to play or view, and
4 . On the phone, select the file you want to view
or play, and then select the Blu-ray product
as the playback device.
then press the
button.
E
5 . On the phone, start playback.
|
42
English
HT-E6500W_ZA_0315.indd 42
2012-03-15 오후 4:35:58
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Video Playback
You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage
devices. Depending on the disc, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video Playback
DISC MENU
TITLE MENU
Using the disc menu, title menu, popup
POPUP
0
menu and title list
During playback, press this button to
DISC MENU
TITLE MENU
POPUP MENU
display the Disc menu.
MUTE
HOME
REPEAT
During playback, press this button to
display the Title menu.
• If your disc has a playlist, press the
Repeat Playback
GREEN (B) button to go to the playlist.
During playback, press this button to
1 . During playback, press the REPEAT
2 . Press the ▲▼ buttons to select a
Chapter, All or Title, then press the
display the Pop-up menu.
button on the remote control.
DISC MENU or During playback, press this button to
TITLE MENU
display the title list.
Playback related buttons
button.
E
| NOTE |
The product does not play sound in Search, Slow,
or Step mode.
6
5
7
Repeat a Title
\
The screen may not display Chapter or Title
immediately. Continue to press the ▲▼
buttons until your choice is inside the blue
field.
or Chapter
Starts playback.
Stops playback.
Pauses playback.
During playback, press the 3 or 4
3 . To return to normal play, press the
REPEAT button again, press the
▲▼ buttons to select Off, and then
press the
button.
E
Fast Motion button.
1 . During playback, press the REPEAT
button on the remote control.
2 . Press the ▲▼ buttons to select
Repeat A-B.
Play
Each time you press the 3 or 4
button, the playback speed will change.
In pause mode, press the 4 button.
Each time you press the 4 button, the
playback speed will change.
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
Slow Motion
Play
| NOTE |
\
The screen may not display Repeat A-B
immediately. Continue to press the ▲▼
buttons until Repeat A-B is inside the blue
field.
Step Motion
Play
Repeat a
Section
3 . Press the
button at the point
E
During playback, press the 1 or 2
where you want repeat play to start (A).
button.
4 . Press the
button at the point
E
Skip Motion
Play
where you want repeat play to stop (B).
5 . To return to normal play, press the
REPEAT button again.
Each time you press the 1 or 2
button, the disc moves to the previous or
next chapter or file.
6 . Press the
button.
E
| NOTE |
\
You must set point (B) at least 5 seconds of
playing time after point (A).
|
English
43
HT-E6500W_ZA_0315.indd 43
2012-03-15 오후 4:36:02
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Menu that appears only when a BD/DVD
disc is playing
Using the TOOLS Menu
During playback, press the TOOLS button.
Select to move to a desired title if
the disc has more than one title, to a
desired scene, or, using Time Search,
Play from the
Select to play the movie from the
beginning
beginning.
Select to move to a chapter that you
desire to watch.
to a specific point in a movie or video.
Title Search
Chapter Search
Audio
With Time Search, you designate
Time Search
the specific point by entering a time
Select to set the desired audio
coordinate in the following format
00:00:00 (hours, minutes, seconds)
using the remote.
language.
- You can also operate this function
by pressing the AUDIO button on the
remote control.
Select to repeat a specific Title, Chapter
(BD/DVD discs only) or marked section.
Repeat Mode
Select to set the desired subtitle
Works the same as the REPEAT button.
language.
See page 43.
Subtitle
Angle
- You can also operate this function
by pressing the SUBTITLE button on
the remote control.
Select to set the desired full screen
Full Screen
size. You can select Original, Mode1
(larger), and Mode2 (largest).
To view a scene from another angle.
The Angle option displays the number
of angles available to view (1/1, 1/2,
1/3, etc.).
Select to set the picture mode.
- Dynamic : Choose this setting to
increase sharpness.
- Standard : Choose this setting for
BONUSVIEW
Video /
most viewing applications.
Select to set the desired bonusview
option.
BONUSVIEW
Audio
- Movie : This is the best setting for
watching movies.
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
Menu that appears only when a file is playing
Picture Mode
| NOTE |
Go to Videos
Move to video list screen.
List
\ When you select User, the User
Settings screen appears. Select an
Scene Search Search the video file by the scene.
option, press
, use the ◄►
E
buttons to make an adjustment, and
Information
Check the video file's information.
then press
. Press the RETURN
E
(
)
' button to go back to the TOOLS
menu.
| NOTE |
\ When you use the BD wise function,
\ Depending on the disc or storage device, the Tools menu
this menu will not appear.
may differ. All options may not be displayed.
Equalizer Mode Select to use the Equalizer.
Select to set the Equalizer.
Equalizer
Settings
| NOTE |
\ It only appears when equalizer
mode is on.
|
44
English
HT-E6500W_ZA_0315.indd 44
2012-03-15 오후 4:36:05
Download from Www.Somanuals.com. All Manuals Search And Download.
Shuffling Tracks on an Audio CD
Controlling Music Playback
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
You can control the playback of music content
located on a DVD, CD, or a USB storage device.
Buttons on the Remote Control used
for Music Playback
1 . During playback, use the ► button to select
in the lower right corner of the screen,
and then press the
button.
E
2 . Use the ▲▼ to set the Shuffle Mode On or
1
2
5
8
0
3
Off, and then press the
button.
E
4
6
6
Creating a Playlist
7
9
DISC MENU
TITLE MENU
POPUP
1
/
17
/ Music /
Audio CD
AllShare Play
1
TRACK 001
►
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
TRACK 009
TRACK 010
04:24
04:01
04:26
05:07
04:47
03:59
04:34
04:02
5
4
2
3
٭ TRACK 001
00:00
/
03:59
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
1
Page Move
/
Tools
'
Return
bc
1 . With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
2 . Use the ▲▼ buttons to select Selection
7
6
5
button : Pause a track.
2
3
4
button : Plays the currently selected track.
Play, and then press the
button. The
E
button : Stops a track.
Selection Play screen appears.
3 . Use the ▲▼ buttons to select a track, and
Skip : During playback, press the 1 or 2 button
then press the
button. A check appears
E
5
6
to move to the previous or next music of listed.
to the left of the track.
4 . Repeat Step 3 to select and check additional
NUMBER buttons : During Playlist playback, press
the desired track number. The selected track is
played.
tracks.
5 . To remove a track from the list, move to the
track, and then press the
button again.
E
The check on the track is removed.
Repeating Tracks on an Audio CD
6 . When done, press the ► button to select
Play, and then press the
button. The
E
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
1 . During playback, use the ► button to select
in the lower right corner of the screen,
and then press the
button.
E
| NOTE |
2 . Use the ▲▼ to select the repeat mode you
\ You can create a playlist with up to 99 tracks on Audio
want - Off, One Song, or All - and then
CDs (CD-DA).
press the
button.
E
\ If you have created a playlist, Selection Play is replaced
by Edit Playlist on the Tools menu.
\ On the Selection Play screen, you can also choose Select
All, Deselect All, and Cancel.
|
English
45
HT-E6500W_ZA_0315.indd 45
2012-03-15 오후 4:36:06
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
• Use Select All to select all tracks. This cancels
| NOTE |
your individual track selections. When you press the
\ When Ripping is done, a folder called MP is created in the
(
)
RETURN ' button on your remote or select PLAY and
USB.
then press the
button, all tracks will appear on the
E
Music Playback screen, and the product will begin to
Controlling Photo Playback
play all tracks from Track 001.
• Use Deselect All to deselect all selected tracks at once.
You can control the playback of photo contents
Then, select individual tracks or use Select All to select
located on a DVD, CD, or a USB storage device.
(
)
all the tracks, and then press the RETURN ' button
Using the Tools Menu
on your remote or select PLAY and then press the
E
button. If you do not use Select All or select individual
During playback, press the TOOLS button.
tracks, the Playlist will not change.
Go to Photos
Select to go to the list of photos on the
current media.
• Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
List
Start Slide
Show
Select to start the slide show.
Ripping
Slide Show
Select to set a slide show's speed.
Speed
You can rip music from a music CD to a USB
device inserted in the USB jack.
Select to set a slide show's special
Slide Show
Effect
effects.
1 . Insert a USB device into the USB jack on
the front of the product, and then press the
Background
Select to listen to music while viewing
a slide show.
(
)
RETURN ' button on your remote.
2 . Insert the disc you want to rip from into the
product and close the disc tray.
Music On
Background
Select to set the background music
Music Setting
setting.
3 . With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
4 . Use the ▲▼ buttons to select Rip, and
Select to set the picture settings.
- Dynamic : Choose to increase
then press the
appears.
button. The Rip screen
E
Sharpness.
- Standard : Choose for most viewing
5 . Use the ▲▼ buttons to select a track, and
applications.
then press the
button. A check appears
E
- Movie : This is the best setting for
to the left of the track.
watching movies.
6 . Repeat Step 5 to select and check additional
Picture Mode
tracks.
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
7 . To remove a track from the list, move to the
track, and then press the
button again.
E
The check on the track is removed.
| NOTE |
8 . When done, press the ► button to select
\ When you use the BD wise function,
Rip, and then press the
button. The Rip
E
this menu will not appear.
pop-up appears.
9 . Press the
button to begin the ripping
E
Select to enlarge the current picture.
Zoom
process. The Ripping Completion Bar pop-up
appears.
(Enlarge up to 4 times)
Select to rotate the picture. (This will
rotate the picture either clockwise or
counter clockwise.)
Shows the picture information.
10 . When ripping is complete, the “Ripping is
completed.” message appears. Press the
Rotate
button.
E
(
)
11 . Press the RETURN ' button to go back to
Information
the Playback screen.
|
46
English
HT-E6500W_ZA_0315.indd 46
2012-03-15 오후 4:36:12
Download from Www.Somanuals.com. All Manuals Search And Download.
| NOTE |
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the earliest to latest date.
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by the month created.
Selection Play lets you select specific
music, video, and photo files to play.
It works essentially the same for all
media. The example below is for
photos.
\ Depending on the disc or storage device, the Tools menu
Earliest Date
Monthly
may differ. All options may not be displayed.
\ To enable the background music function, the photo file
must be in the same storage media as the music file.
However, the sound quality can be affected by the bitrate
of the MP3 file, the size of the photo, and the encoding
method.
\ You can't enlarge the subtitle and PG graphic in the full
screen mode.
Using the Tools Menu when a File
is Highlighted
1. On the Thumbnail View screen,
highlight a photo, and then press
the TOOLS button on the remote.
When a file is highlighted, press the TOOLS
button.
2. In the Tools menu, select Selection
Play, and then press the
E
Select to access the sort options: Artist,
button.
Genre, Monthly, Latest Date, etc. The
View
3. On the selection screen, use the
sort options that appear depend on the
▲▼◄► buttons to select a
storage and media type.
photo you want to view, and then
Appears in the View function screen.
press the
button.
E
Folder view
Title
Select to display the folders on the
A check mark appears to the left
storage device.
of the picture.
4. Repeat Step 3 for each photo you
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by title.
Appears on the View function screen.
Select Artist to sort and then display
all music tracks on a storage device by
artist.
Appears on the View function screen.
Select Album to sort and then display
all music tracks on a storage device by
album.
Appears on the View function screen.
Select Genre to sort and then display
all music tracks on a storage device by
genre.
want to view.
Selection Play
5. To de-select a photo, highlight it,
and then press the
button.
E
6. When done, use the ◄► buttons
Artist
to select Play, and then press
the
button. A slide show
E
containing the photos you selected
begins.
Album
7. To pause the slide show, press the
button once. To restart the
E
slide show, press the
button
E
again.
8. To stop the slide show, press the
Genre
(
)
RETURN ' button.
| NOTE |
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the latest to earliest date.
\ After the slide show begins, you can
control the slide show by pressing
the TOOLS button and displaying
the Slide Show menu. See " Using
the Tools Menu" page 46.
Latest Date
|
English
47
HT-E6500W_ZA_0315.indd 47
2012-03-15 오후 4:36:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
• Select Create New, and then press
Select Send to upload selected files
the
button. On the keyboard
to Picasa, Facebook, Cloud Storage, N
Drive, or Family Story.
E
pop-up that appears, create a name
for the new playlist. Enter numbers
using the numbers on the remote.
Enter letters by using the ▲▼◄►
buttons to move the cursor, and
To use Send, you need to establish an
account with the on-line site, and then
log in using the Log In function.
1. Use the ▲▼◄► buttons to
then pressing the
button.
E
select a file, and then press the
When finished, move to DONE at
button.
E
the bottom of the screen, and then
2. Repeat for each track or file you
press the
button.
E
want to upload.
Send
Depending on the screen you are
viewing, select Delete to erase a file
from erasable media (such as a USB
device) or to delete a playlist.
| NOTE |
Delete (Playlist)
Edit Playlist
\ You can also move to Select All on
the right, and then press the
E
button to select all tracks or files.
Select Edit Playlist to remove files or
tracks from an existing playlist. The
storage device containing the playlist
must be inserted into or attached to
the product.
3. Select Send on the right side, and
then press the
button.
E
4. Use the ▲▼ buttons to select the
on line site you want to upload the
files or tracks to, and then press
the
button.
E
1. Use the ▲▼◄► buttons to
select a file, and then press the
The Log In/Out function lets you log in
Login / Out
button.
E
to your online Samsung account.
2. Repeat for each track or file you
Select to create a playlist or add files
or tracks to a playlist.
want to remove.
| NOTE |
1. Select Add to Playlist, and then
\ You can also move to Select All on
press the
button.
E
the right, and then press the
E
2. Use the ▲▼◄► buttons to
button to select all tracks or files.
highlight a track or file, and then
3. Select Remove on the right side,
press the
button.
E
and then press the
button.
E
3. Repeat for each track or file you
Add to Playlist
want to add.
After you have sorted by Artist, Genre,
Album,Title, Latest Date, Earliest Date,
or Monthly, select a group that is the
result of the sort (for example, all
pictures taken in August), and then
select Play Current Group to play or
view the files in that group only.
4. Select Add on the right, and then
press the
button.
E
Play Current
Group
5. On the screen that appears,
perform one of the following
actions:
• Select the Playlist to which you want
to add the tracks or files and then
Select to go to the Playlist section of
Go to Playlist
the Main AllShare screen.
press
button.
E
|
48
English
HT-E6500W_ZA_0315.indd 48
2012-03-15 오후 4:36:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Stations
Encoding - which changes by language
or by geographical area - modifies
how the product sorts, arranges, and
presents files or tracks, displays dates,
etc. Select Encoding to change the
encoding to match your language or
geographical area.
Example : Presetting FM 89.10 into memory.
1 . Press the FUNCTION button to select FM.
2 . Press the TUNING/CH (,.) button to
select <89.10>.
Encoding
3 . Press the TUNER MEMORY button.
• NUMBER flashes on the display.
Displays media file and content
Information
4 . Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
information.
| NOTE |
\ Depending on the disc or storage device, the Tools menu
• After you press the TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
may differ. All options may not be displayed.
5 . To preset another station, repeat steps 2 to 4.
• To tune to a preset station, press the
TUNING/CH (,.) button.
Listening to Radio
Using Buttons on the Remote Control
1 . Press the FUNCTION button to select FM.
Using the Special Effects Remote
Control Buttons
2 . Tune to the desired station.
• Preset Tuning 1 : Press the 5 button
to select PRESET and then press the
TUNING/CH (,.) button to select the
preset station.
SOUND
SOUND EFFECT Function
EFFECT
- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
Lets you select a mode that optimizes the sound.
• Manual Tuning : Press the 5 button
to select MANUAL and then press the
TUNING/CH (,.) button to tune to a
lower or higher frequency.
1. Press the SOUND EFFECT button.
2. Press the ▲▼ button to select the desired mode:
DSP, Dolby Pro Logic II or SFE Mode.
3. Press the ◄► buttons to select the desired sound
• Automatic Tuning : Press the 5 button
to select MANUAL and then press and
hold the TUNING/CH (,.) button to
automatically search the band.
effect.
K
DSP
MP3 Enhancer Power Bass Virtual 7.1 Off
Setting Mono/Stereo
• MP3 Enhancer : Helps enhance your sound experience
(ex. mp3 music). You can upscale your MP3 level sound
(24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit).
Press the MO/ST button.
• Each time the button is pressed, the sound
• Power Bass : Increases the volume level of bass tones
and provides thudding sound effects.
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
• Virtual 7.1 : Applies the 7.1 CH sound effect using the
clear, interference-free broadcast.
5.1 CH speaker system.
• Off : Select this for normal listening.
|
English
49
HT-E6500W_ZA_0315.indd 49
2012-03-15 오후 4:36:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
K
Dolby Pro Logic II
Movie Music Game Matrix Prologic Off
Playing a 2D video in 3D mode
• Movie : Adds realism to a movie soundtrack.
• Music : When listening to music, you can experience
sound effects as if you are listening to the actual
performance.
You can enjoy an ordinary 2D video in 3D mode.
| NOTE |
• Game : Enhances the excitement of the game’s sound.
\ If you move to the Home or Smart Hub Home menu
when the product is in 3D mode, it will switch to 2D
automatically.
• Matrix : Select to hear multi channel surround sound.
• Prologic : Select to listen to a 2CH sound source in
5.1CH surround sound with all speakers active.
- A specific speaker(s) may not output depending on
the input signal.
• Off : Select this for normal listening.
K
SFE Mode
Symphony Hall in Boston (Hall 1) Philharmonic
Hall in Bratislava (Hall 2) Jazz Club in Seoul B
Church in Seoul Amphitheater (Rock) Off
• Symphony Hall in Boston (Hall 1) : Provides a clear
vocal as if listening in a concert hall.
• Philharmonic Hall in Bratislava (Hall 2) : Also
provides a clear vocal as if listening in a concert hall
but, less powerful than HALL1.
• Jazz Club in Seoul B : Recommended setting for Jazz.
• Church in Seoul : Gives the feel of being in a grand
church.
• Amphitheater (Rock) : Recommended setting for
Rock.
• Off : Select this for normal listening.
3D Sound
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off High Medium Low
| NOTE |
\ 3D Sound is not available in FM mode.
|
50
English
HT-E6500W_ZA_0315.indd 50
2012-03-15 오후 4:36:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
You can enjoy various network services such as
Smart Hub or BD-LIVE by connecting the product
to your network.
Smart Hub at a Glance
1
2
34
To use network services, you must first:
Search
1 . Connect the product to the network.
(See page 21)
Samsung Apps
Your Video
Family Story
Fitness
Kids
2 . Configure the network settings.
0
9
5
6
7
(See pages 31~35)
Contents
1
Contents
2
Contents
3
Contents
4
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
Using Smart Hub
a
Login
b
WallPaper
/
Tools
'
Return
8
Using Smart Hub, you can download movies,
videos, and music from the Internet, and access
various for pay or free-of-charge applications
and view them on your TV. Application content
includes news, sports, weather forecasts, stock
market quotes, maps, photos, and games.
Your Video : Provides recommendations for videos
1
based on your tastes.
Search : Provides an integrated search of your
2
3
video providers and connected AllShare devices.
For instructions that explain how to use Smart
Recommended : Displays recommended contents
Hub, follow these steps:
managed by Samsung.
Commercial : Displays the Smart Hub Guide, an
introduction to the product, and new application
introductions.
Family Story : An effortless way to access family
2 . Click Support at the top of the page.
4
5
3 . On the Support page, enter the model
number of your product into the Model
Number field.
content.
4 . On the page that appears, click Get
downloads on the left side under Downloads.
The Download Center appears.
• Provides access to family photos, messages, and
events, anytime and anywhere.
Fitness : Gateway to the Unified Self-Care Service.
5 . On the Download Center page, click the
• Presents fitness videos from various content
partners with feedback on calories burned after
every workout.
Manuals tab.
6
7
6 . On the Manuals tab, click the file icon to the
right of Smart Hub Users Manual. The manual
downloads.
Kids : Kids service gives kids an easy and safe way
to enjoy their favorite content.
| NOTE |
• Provides a wide variety of fun and safe content
\ The web location of the Smart Hub manual is subject to
for children.
change without notice.
Navigation Help : Displays the remote control
buttons you can use to navigate in Smart Hub.
• RED (A) : To log in to Smart Hub.
8
• GREEN (B) : To display the background screen.
• Tools : To display the settings window.
• Return : To return to the previous menu.
|
English
51
HT-E6500W_ZA_0315.indd 51
2012-03-15 오후 4:36:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Web Browser at a Glance
My Applications : Displays your personal gallery
of applications which you can add to, modify, and
9
1
delete.
Samsung Apps : Open Samsung Apps to download
various for pay or free-of-charge application
0
services.
Using the Web Browser
You can access the internet using the Web
Browser application which is installed in the Smart
Hub screen by default.
Google Search
I’m Feeling Lucky
b Control Panel c Link Browsing / Tools ' Exit
2
1 . Select Smart Hub on the Home screen, and
then press the
button.
E
2 . Select the Web Browser application in Smart
Control Panel : Displays the various Web Browser
Hub, and then press the
button.
E
functions.
•
•
•
: Moves to the previous page.
| NOTE |
: Moves to the last page before going back.
\ When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV - and BD
Wise is on - the browser is maximized to fill the screen
and the TV's resolution is set to the optimal resolution
automatically.
: Reloads the current page so that it is
refreshed on the screen.
•
•
•
•
•
: Moves to the Home screen of the Web
Browser.
: Allows you to zoom in or out of the screen at
various percentages.
\ The Web Browser is not compatible with Java
applications.
: Allows you to bookmark specific pages so
that you can move to them easily.
\ If you attempt to download a file, and the file can not be
saved, an error message will appear.
1
: Allows you to view the history of your visited
pages by date, name, or frequency.
\ The playback of Flash videos is not supported.
\ E-commerce, for purchasing products online, is not
: Allows you to enter a
supported.
page address manually or select a page from the
visited page list to move to that page.
\ ActiveX is not supported.
•
•
•
•
: Allows you to switch easily between
multiple, currently open Web Browser windows.
: Allows you to search for information by
entering words.
: Lets you share the current site with your
family group by sending a message.
: Allows you to configure all settings for using
the Web Browser.
|
52
English
HT-E6500W_ZA_0315.indd 52
2012-03-15 오후 4:36:17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Disc to Digital
Navigation Help : Displays the remote control
buttons you can use to navigate in Web Browser.
Disc to Digital lets you upload DVD movies
to your own personal, Internet Disc to Digital
repository and then stream them in HD format to
other Internet connected devices including smart
phones, tablet PCs, and Smart TVs.
• GREEN (B) : To display the Control Panel.
2
• YELLOW (C) : To search a link.
• Tools : To display Tools window.
• Exit : To return to the previous menu.
To use Disc to Digital, you must first download
the Disc to Digital application. To download the
application, follow these steps.
BD-LIVE™
1 . Make sure the product is connected to the
Once the product is connected to your network,
you can enjoy various movie-related service
contents available on BD-LIVE compliant discs.
network. (see pages 31~35)
2 . On the Home screen, select Smart Hub, and
then press the
button.
E
1 . Attach a USB memory stick to the USB jack
on the front of the product, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
3 . Select Samsung Apps, and then press the
button.
E
4 . In Samsung Apps, select and then download
one of the Disc to Digital applications. There
can be up to three.
2 . Select Settings on the Home screen, and
then press the
button.
E
5 . Press the HOME button on the remote
control to come back to the Home screen.
3 . Select Network, and then press the
E
button.
6 . Select Settings > Network > Disc to Digital
App, and then select an application to be the
default application for Disc to Digital. (See
page 28)
4 . Select BD-Live Settings, and then press the
button.
E
5 . Select BD Data Management, and then
press the
button.
E
Disc to Digital App
6 . Select Select Device, and then press the
button.
Select a default application to use for this service.
E
7 . Select USB, and then press the
button.
E
Digital Copy
Locker
Digital Copy
Locker
B
DigitAal Copy
8 . Insert a Blu-ray Disc that supports BD-LIVE.
xser pp
Digital Copy
Locker B
Locker A
9 . Select an item from the list of BD-LIVE service
Close
contents provided by the disc manufacturer.
'
Return
| NOTE |
\ The way you use BD-LIVE and the provided contents may
differ, depending on the disc manufacturer.
Disc to Digital application you downloaded)
and create an account.
|
English
53
HT-E6500W_ZA_0315.indd 53
2012-03-15 오후 4:36:18
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Registering a DVD Movie in Disc to
Playing a Registered Disc to Digital
Movie
Digital
Before you can stream a DVD movie to other
Internet connected devices, you must register
the movie using your Disc to Digital software and
purchase the right to stream it to other devices.
1 . On a PC or other Internet connected device,
access the Flixster website, and then access
your Flixster account. Enter your account PIN
number as necessary.
1 . Insert the DVD movie you want to register
2 . Find your movie, and then enter the Activation
with Disc to Digital.
Code.
2 . On the Home screen, select Disc to Digital,
3 . If you see a play icon, click the play icon.
and then press the
button.
E
The movie plays.
3 . Disc to Digital verifies the disc. Once the
DVD's information is verified, the default
application for Disc to Digital opens (in this
example, Flixster).
Section Title Here: Some Title Here
XXXXXXXXXXXXXX
XXXXXX (2010)
AV Rating:
96%
Xxxxxxxx xxx Xxxxxxxxxxxx Xxxxxxxx xx
Xxx xx Xxxxxx Xxxxxxxx
Xxxxxxxx xxx Xxxxxxxx
Xxxxxxx xxx Xxxxxxxxxxxx
Length: XXX xxxxxx Rating: xxxxxx
Genre: Xxx xx Xxxxxx
Synopsis
Rent & Own
Cast & Crew
Trailer & Clips
Movie information
Rent in HD form $x.xx All Cast & Crew Bios 4 Clips
c
Follow
d
Share
'
Back
| NOTE |
\ You can also start the Disc to Digital function by pressing
the Disc 2D Digital button on the remote control.
\ If you've downloaded one or more Disc to Digital
applications, you must set one of them as the default
application.
| NOTE |
com" to create your account.
4 . In the Flixster application, find your movie and
then click the Purchase button. The Activation
Code appears.
See "Disc to Digital App" on page 28.
\ Disc to Digital only works with commercial DVD-VIDEOs.
Blu-ray Discs, Audio-CD, and Data discs are not
supported.
\ Some commercial discs purchased outside of your region
or that do not meet required specifications may not be
supported by this function.
Section Title Here: Some Title Here
XXXXXXXXXXXXXX
XXXXXX (2010)
XXXX
Activate Your Account to Create A Digital Copy
To create a digital copy, you must first activate your account. Go to
Cancel
/
Open Menu
'
Back
5 . Record the activation code. You now have
the right to stream your movie in HD quality
resolution to most other Internet connected
devices.
|
54
English
HT-E6500W_ZA_0315.indd 54
2012-03-15 오후 4:36:19
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Note
HDMI OUT
• Certain HDMI output resolutions may not work, depending on your TV.
Connections
• You must have an HDMI connection to enjoy videos with 3D technology.
• A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the
menu.
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray
menu.
• Depending on the content and the position of the picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option which is different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
• If you select 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of picture).
BD Wise (Samsung Products only)
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
Settings
• If the product is connected to a device that does not support BD Wise, you can not use the BD
Wise function.
•
For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby digital,
DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• This Digital Output setup does not affect the analog (L/R) audio or HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
BD-LIVE Internet Connection
• The Internet connection may be restricted while you are using BD-LIVE contents.
|
English
55
HT-E6500W_ZA_0315.indd 55
2012-03-15 오후 4:36:23
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
BD Data Management
• In the external memory mode, disc playback may be stopped if you disconnect the USB device in
the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster
read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on the conditions.
Front Display
• You cannot change the brightness of the
Speaker Settings
button and the VOL +,
-
button.
• When Speaker Selection is set to TV Speaker, audio is produced through the TV speakers.
• Running the Auto Sound Calibration function takes about 3 minutes.
Settings
• Make sure there is no disc in the product when you run the Auto Sound Calibration function.
• If the ASC microphone is disconnected during the Auto Sound Calibration setup, the setup will be
canceled.
• When the Auto Sound Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode
will not work.
• If the product is connected to external devices or other components (such as an iPod, AUX,
D. IN), the Auto Sound Calibration Setup may not work properly.
HDMI audio
• When HDMI audio is output to the TV speakers, it is automatically down-mixed to 2 channels.
Audio Return Channel
• When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.
• Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility
problem.
• The ARC function is only available if an ARC-compliant TV is connected.
Digital Output
• Digital Output can be activated when Speaker Selection is set to TV Speaker.
|
56
English
HT-E6500W_ZA_0315.indd 56
2012-03-15 오후 4:36:24
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Video files
• Video files with high bitrates of 20Mbps or more strain the product’s capabilities and may stop
playing during playback.
Selecting the Audio Language
• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the languages that are
encoded on the disc. This function or certain languages may not be available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby digital audio soundtrack in
English.
Playback
Selecting the Subtitle Language
• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the
Disc Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same time.
• The total number of primary and secondary subtitles are displayed respectively.
Playing JPEG files
• You can’t enlarge the subtitle and PG graphic in the full screen mode.
Dolby Pro Logic II Mode
• Before selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to
surround sound.
Using the TOOLS button while playing pictures
• If the system is connected to a BD Wise compliant TV that has set BD Wise to On, the Picture
Settings menu will not appear.
AllShare Play
• The Background Music function will not work unless the music file and the photo file are located
on the same storage media. Also, sound quality can be impacted by the bitrate of the MP3 music
file, the size of the photos, and the encoding method.
Playing back a USB Storage Device
• You must remove the USB storage device safely (by performing the “Safely Remove USB”
function) to prevent possible damage to the USB memory. Press the HOME button to move to the
Home menu, select the YELLOW (C) button, and then press the
button.
E
|
English
57
HT-E6500W_ZA_0315.indd 57
2012-03-15 오후 4:36:25
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Playing Music
• Adjust the volume to a moderate level before you connect your iPod to the product.
• When the product is on and you connect an iPod, the product will charge the iPod's battery.
Watching a Movie
• You must have the VIDEO output (Composite) connected to your TV to view iPod video (See page
19).
AllShare Play
• If you want to play iPod video via VIDEO output, set Anynet+ (HDMI-CEC) to off.
• Only the playback screen will appear on the TV. View other iPod screens on the iPod player.
• If you want to return to the iPod menus while the iPod player is connected using the dock, press
FUNCTION on the remote control or press
on the front panel of the system and select
R. IPOD.
The Function mode switches as follows :
BD/DVD D. IN AUX R. IPOD HDMI1 HDMI2 FM
iPod/iPhone Models You Can Use with This Product
• The volume control may not operate normally with iPod and iPhone models not listed on page
39. If you have a problem with any of the models listed there, please update the software of the
iPod/iPhone to the lastest version.
• Depending on the software version of the iPod, control problems may occur. This is not a
malfunction of the Home Theater.
iPod
• Depending on the software version or the type of iPod, some operations may differ. Install the
latest iPod software. (recommended)
• You can enjoy music or videos through the Blu-ray/DVD disc function and enjoy music, videos
through the Remote iPod function. You need to use the iPod Dock to enjoy videos.
• Playback of applications' contents through the product is not guaranteed. We recommend
playing contents downloaded to the iPod.
|
58
English
HT-E6500W_ZA_0315.indd 58
2012-03-15 오후 4:36:25
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution according to the output mode
K
Blu-ray Disc/E-contents/Digital Contents playback
HDMI/connected
HDMI/not connected
VIDEO Mode
Output
HDMI Mode
Setup
VIDEO Mode
E-contents/
Blu-ray Disc
Digital contents
1080p@60F
Resolution of Blu-
BD Wise
Auto
480i
-
ray Disc
Max. Resolution of
TV input
Max. Resolution of TV
480i
480i
480i
-
-
-
input
1080p@60F
Movie Frame : Auto
1080p@60F
1080p@60F
1080p@24F
1080p@24F
(24Fs)
1080i
720p
480p
480i
1080i
720p
480p
-
1080i
720p
480p
-
480i
480i
480i
-
480i
480i
480i
480i
K
DVD playback
HDMI/connected
HDMI/not connected
Output
Setup
HDMI Mode
VIDEO Mode
VIDEO Mode
BD Wise
Auto
480i
480i
480i
480i
480i
480i
480i
-
-
Max. Resolution of TV input
-
1080p@60F
1080i
1080p@60F
1080i
720p
-
480i
480i
480i
480i
720p
480p
480p
480i
-
|
English
59
HT-E6500W_ZA_0315.indd 59
2012-03-15 오후 4:36:26
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Digital Output Selection
Bitstream
(Re-encoded
Dolby D)
Bitstream
Bitstream
Setup
PCM
(Unprocessed)
(Re-encoded DTS)
Connection
HDMI supported AV receiver
Re-encoded
PCM
Up to PCM 7.1ch
Up to PCM 7.1ch
Up to PCM 7.1ch
Up to PCM 7.1ch
Up to PCM 6.1ch
PCM
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS re-encoded
DTS re-encoded
DTS re-encoded
DTS re-encoded
DTS re-encoded
Dolby Digital *
Re-encoded
Dolby Digital
Dolby Digital *
Dolby Digital
Plus
Re-encoded
Dolby Digital *
Audio Stream
on Blu-ray
Disc
Re-encoded
Dolby TrueHD
Dolby Digital *
Re-encoded
DTS
Dolby Digital *
DTS-HD High
Resolution
Audio
DTS-HD High
Re-encoded
Up to PCM 7.1ch
DTS re-encoded
Resolution Audio
Dolby Digital *
DTS-HD
Re-encoded
Up to PCM 7.1ch
DTS-HD Master Audio
DTS re-encoded
Master Audio
Dolby Digital *
PCM
Dolby Digital
DTS
PCM 2ch
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
Audio Stream
on DVD
Up to PCM 5.1ch
Up to PCM 6.1ch
Decodes the main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and adds
Navigation Sound
Effects, then re-
Outputs only the main
Decodes the main
feature audio and
BONUSVIEW audio
feature audio stream Decodes the main feature
so that your AV
audio and BONUSVIEW
audio stream together
receiver can decode
Definition for
Blu-ray Disc
Any
stream together into the audio bitstream. into PCM audio and adds
PCM audio and adds
Navigation Sound
Effects.
You will not hear
Navigation Sound Effects,
BONUSVIEW audio then re-encodes the PCM
or Navigation Sound audio into DTS bitstream.
Effects.
encodes the PCM
audio into Dolby digital
bitstream or PCM.
* If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be
PCM 2ch.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Blu-ray Disc.
|
60
English
HT-E6500W_ZA_0315.indd 60
2012-03-15 오후 4:36:27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect
the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).
Symptom
I cannot eject the disc.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the condition of the iPod connector and Dock.
The iPod fails to connect.
• Keep the iPod software version up to date.
• Check the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
Playback does not start.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
•
•
The home theater does not play sound during fast playback, slow playback,and step motion
playback.
Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and not
all 6.
• On certain Blu-ray/DVD discs, sound is output from the front speakers only.
• Check if the speakers are connected properly.
• Adjust the volume.
• When listening to a CD, radio or TV, sound is output to the front speakers only.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is
produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information display?
The remote control does not
•
Are you operating the remote within its operational range and within the proper angle relative to
work.
the sensor?
•
•
Are the batteries drained?
Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly?
• The disc is rotating but no
picture is produced.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• Picture quality is poor and
the picture is shaking.
Audio language and subtitles
do not work.
• A poorly manufactured disc may not be playable.
•
Audio language and subtitles will not work if the disc does not contain them.
|
English
61
HT-E6500W_ZA_0315.indd 61
2012-03-15 오후 4:36:27
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Symptom
Check/Remedy
The menu screen does not
appear even when the menu
function is selected.
• Are you using a disc that does not contain menus?
• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the
Blu-ray Disc jacket and then select the appropriate function.
The aspect ratio cannot be
changed.
• The product is not working. • Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
(Example: The power goes
out or a strange noise is
heard.)
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
•
The Product is not working
normally.
You have forgotten the rating • With no disc in the product, press and hold the product's 5 button for longer than 5
level password.
seconds. INIT appears on the display and all settings will return to the default values.
Then, press the POWER button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio
through the Product, no
sound is heard.
•
If the OPEN/CLOSE
^
button is pressed while listening to TV audio using the D. IN or
AUX functions, the
functions are turned on and the TV audio is muted.
Blu-ray/DVD disc
"Not Available" appears on
• The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
screen.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a
resolution your TV cannot
support (for example, 1080p),
you may not see a picture on
your TV.
• Press and hold the 5 button on front panel for more than 5 seconds with no disc in
the product. All settings will revert to the factory settings.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support HDCP (High-
bandwidth Digital Content Protection).
|
62
English
HT-E6500W_ZA_0315.indd 62
2012-03-15 오후 4:36:28
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check/Remedy
AllShare Play function
I can see folders shared
through AllShare Play,
but I cannot see the files.
• AllShare Play shows only files corresponding to the Photo, Music, and Movie categories.
Files that do not correspond to these categories may not be displayed.
Video is played intermittently. • Check if the network is stable.
• Check if the network cable is properly connected and if the network is not overloaded.
• The wireless connection between the server and the product is unstable.
Check the connection.
The AllShare Play connection
between the TV and PC is
unstable.
•
•
IP address under the same subnetwork should be unique, otherwise IP collision can
results in such a phenomenon.
Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
I cannot connect to the
• Test whether the network connection is active by using the Network Status function.
BD-LIVE server.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the BD-LIVE
service.
You can check the available size in BD Data Management. (See page 56)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
•
The memory device must have at least 1GB of free space to accommodate the BD-LIVE
service.
You can check the available size in BD Data Management. (See page 56)
| NOTE |
\ When the factory default settings are restored, all stored user BD data will be deleted.
Repairs
If you contact us to repair your product, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the product.
2. You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or begin
any work on your product.
com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair
your product.
|
English
63
HT-E6500W_ZA_0315.indd 63
2012-03-15 오후 4:36:28
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Power Requirements
AC 120V, 60Hz
Power Consumption
Weight
127.7 W
8.6 Ibs
General
Dimensions
16.93 (W) x 2.56 (H) x 12.74 (D) inches
+41°F to +95°F
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
10 % to 75 %
55 dB
FM Tuner
12 dB
Total harmonic distortion
BD (Blu-ray Disc)
0.5 %
Reading Speed : 9.834 m/sec
Reading Speed : 6.98 ~ 7.68 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
DVD (Digital Versatile Disc)
CD : 5 inches (COMPACT DISC)
CD : 3 1/2 inches (COMPACT DISC)
Composite Video
Disc
Video Output
Video/Audio
Blu-ray Disc : 480i
DVD : 480i
1080p, 1080i, 720p, 480p
HDMI
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
165W x 2(3Ω)
170W(3Ω)
Center speaker output
Surround speaker output
Subwoofer speaker output
165W x 2(3Ω)
170W(3Ω)
Amplifier
Analog input
Digital input
70dB
20Hz~20kHz ( 3dB)
20Hz~40kHz ( 4dB)
Frequency response
S/N Ratio
Channel separation
Input sensitivity
60dB
(AUX)500mV
|
64
English
HT-E6500W_ZA_0315.indd 64
2012-03-15 오후 4:36:29
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1ch speaker system
Speaker system
Front
Surround
3 Ω
Center
3 Ω
Subwoofer
3 Ω
Impedance
3 Ω
Frequency range
140Hz~20kHz
140Hz~20kHz
87dB/W/M
140Hz~20kHz
87dB/W/M
40Hz ~ 160Hz
Output sound
87dB/W/M
88dB/W/M
pressure level
Rated input
165W
330W
165W
330W
170W
340W
170W
340W
Speaker
Maximum input
Front : 3.70 x 11.02 x 2.75 inches
Surround : 3.54 x 5.57 x 2.69 inches
Center : 14.17 x 2.93 x 2.69 inches
Subwoofer : 6.61 x 13.78 x 11.22 inches
Dimensions
(W x H x D)
Front : 2.09 Ibs, Surround : 1.34 Ibs
Weights
Center : 1.94 Ibs, Subwoofer : 8.09 Ibs
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
• Design and specifications are subject to change without prior notice.
• Dispose unwanted electronics through an approved recycler.
278 - 0799
K
SWA-5000
Power Requirements
Power Consumption
Weight
AC 120V ~60Hz
50 W
2.52 lbs
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Output
3 x 9 x 6 inches
+41°F to +95°F
10% ~ 75%
165W x 2 CH
20Hz~20KHz
65dB
Frequency range
S/N Ratio
|
English
65
HT-E6500W_ZA_0315.indd 65
2012-03-15 오후 4:36:29
Download from Www.Somanuals.com. All Manuals Search And Download.
Rovi Flow-Down License Terms (Terms of Use)
- This application incorporates software and technology of Rovi Corporation (“Rovi”). The Rovi software
and technology (collectively, the “Rovi Technology”) allows End Users to access music-related data
(“Rovi Data”) over the Internet and otherwise from proprietary Rovi databases (the “Rovi Databases”)
located on Rovi servers (the “Rovi Servers”) and to perform other functions. You may access and use
Rovi Data only by means of the intended End User functions of this application software.
- You agree that you will use the Rovi Data, the Rovi Technology, and the Rovi Servers for your own
personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Rovi Data to
any third party. You agree not to use or exploit Rovi Data, the Rovi Technology, the Rovi Databases, or
the Rovi Servers, except as expressly permitted herein.
- You agree that your non-exclusive License to access the Rovi Databases and to use the Rovi Data,
the Rovi Technology, and the Rovi Servers will terminate if you violate these restrictions. If your License
terminates, you agree to cease any and all use of the Rovi Data, the Rovi Technology, and the Rovi
Servers. Rovi reserves all rights in Rovi Data, the Rovi Technology, and Rovi Servers, including all
ownership rights. You agree that Rovi may enforce its rights under this Agreement against you directly
in its own name.
- Rovi reserves the right to delete data from the Rovi Databases or to change data categories for any
cause that Rovi deems sufficient. No warranty is made that the Rovi Technology or Rovi Servers are
error-free or that functioning of Rovi Technology or Rovi Servers will be uninterrupted. Rovi is not
obligated to provide you with any new enhanced or additional data types or categories that Rovi may
choose to provide in the future and is free to discontinue its online services at any time.
- The data you submit to use will not be personal data or personally identifiable data, but rather only
data respecting music albums and associated data that does not appear in the Rovi Lookup Database.
You certify that to the best of its knowledge the album to which the submitted data corresponds is
commercially available and that you End User are lawfully permitted to submit the data.
- To the extent that you, the End User, provide any information or original works of authorship to be
added to Rovi Databases, you represent and warrant that you are the sole author of such work(s) and
further hereby assign to Rovi all rights of copyright therein, including the right to register the copyright
in such work(s) as part of the Rovi Database.
- THE ROVITECHNOLOGY AND EACH ITEM OF ROVI DATA ARE LicenseD TO YOU “AS IS.” ROVI
MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE
ACCURACY OF ANY ROVI DATA ON THE ROVI SERVERS. ROVI DISCLAIMS ALL WARRANTIES
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT.
ROVI DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE ROVI
TECHNOLOGY OR ANY ROVI SERVER. IN NO CASE WILL ROVI BE LIABLE TO YOU OR ANY THIRD
PARTY FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR
LOST REVENUES RESULTING FROM YOUR USE OF ROVI DATA, THE ROVI TECHNOLOGY OR
OTHERWISE.
HT-E6500W_ZA_0315.indd 66
2012-03-15 오후 4:36:30
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original
consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the
product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set
forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS
IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the
extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following,
including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this
product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect,
fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories,
applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this
product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure
to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the
instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY
TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
HT-E6500W_ZA_0315.indd 67
2012-03-15 오후 4:36:30
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park,
NJ 07660-2112
1-800-SAMSUNG
IN THE US
(726-7864)
AH68-02463A-01
HT-E6500W_ZA_0315.indd 68
2012-03-15 오후 4:36:30
Download from Www.Somanuals.com. All Manuals Search And Download.
|