HW-E450
Crystal Surround Air Track
(Active Speaker System)
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
safety information
safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION
risK Of eLectric sHOcK
DO nOt OPen
This symbol indicates important instructions
accompanying the product.
Warning : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
caUtiOn : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
This apparatus shall always be connected to a AC outlet with a protective grounding connection.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
•
•
caUtiOn
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the
apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power
plug must be easily and readily accessible at all times.
Wiring the Main Power Supply Plug (UK Only)
iMPOrtant nOtice
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated
on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of
the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power
point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not
connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.
iMPOrtant
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
Warning : DO nOt cOnnect eitHer Wire tO tHe eartH terMinaL WHicH is MarKeD WitH tHe
Letter e Or By tHe eartH syMBOL
, Or cOLOUreD green Or green anD yeLLOW.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
PrecaUtiOns
2
6
.
.
7
86n
c
ch
m
9.91cm
3
3
9
.
91
c
m
3
9
.
91
c
m
Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the
back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10
cm). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This
unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to
leave it unused for a long period of time.
During thunderstorms, disconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
Phones
The batteries used with this product contain chemicals that are
harmful to the environment.
Do not dispose of batteries in the general household trash.
Protect the product from moisture (i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric
fields Disconnect the power cable from the AC supply if the unit
malfunctions. Your product is not intended for industrial use. Use
of this product is for personal use only.
Condensation may occur if your product has been stored in
cold temperatures. If transporting the unit during the winter, wait
approximately 2 hours until the unit has reached room tempera-
ture before using.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
2
2
Features
License
FeAtU2ReS
3
4
Safety warnings
Precautions
SAFety InFORMAtIOn
3
6
6
Before reading the user’s manual
What’s included
gettIng StAR6teD
7
9
Front/Rear Panel
DeSCRIPtIOnS
7
Tour of the remote control
ReMOte COntROl
9
10 Installing the wall mount
COnneCtIOnS
11 Connecting the wireless subwoofer
12 Installing toroidal ferrite to hdmi in/out
12 Installing ferrite core to Audio/USB cable
13 Connecting the Crystal Surround Air Track
10
15 Basic functions
16 Advanced functions
22 Software upgrade
FUnCtIOnS
15
23 Troubleshooting
24 Specifications
tROUBleSH2OOt3Ing
APPenDIx
24
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
BefOre reaDing tHe User’s ManUaL
Note the following terms before reading the user manual.
icons used in this manual
icon
term
Definition
Indicates a situation where a function does not operate or settings may be
canceled.
caution
note
Indicates tips or instructions on the page that help each function operate.
safety instructions and troubleshooting
1) Be sure to be familiar with the Safety Instructions before using this product. (See page 3)
2) If a problem occurs, check Troubleshooting. (See page 23)
copyright
©2012 Samsung Electronics Co.,Ltd.
All rights reserved; no part or whole of this user’s manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.,Ltd.
WHat’s incLUDeD
Check for the supplied accessories shown below.
POWER
TV POWER
SAT
SOURCE SOUND
SPEAKER
3D SOUND
EFFECT
SAT MUTE
SMART
VOLUME
S/W LEVEL
VOLUME
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
TV SOURCE
TV VOL
TV CH
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
remote control / Batteries (aaa size)
Bracket-Wall Mount
User Manual
(For HDMI cable 1EA)
(Large)
(Small)
(For Audio cable 1EA)
(For USB cable 1EA)
audio cable
toroidal ferrite core
UsB cable
▪ The appearance of the accessories may differ slightly from the illustrations above.
▪ Use the dedicated USB cable to connect external USB devices to the unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
descriptions
frOnt/rear PaneL
1
ꢀ
ꢁ
4
ꢂ
O
P
T
C
A
L
I
10
6
H
D
M
I
I
N
8
9
A
U
X
I
H
D
M
I
O
U
T
ꢃ
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
DisPLay
Displays the current mode.
POWer BUttOn
Turns the Crystal Surround Air Track on and off.
Selects the DIGITAL, AUX, HDMI, BT, USB input.
Controls the volume level.
fUnctiOns
BUttOn
VOLUMe +/-
UsB POrt
Connect here and play files from external USB storage devices
such as MP3 players.
ꢂ
6
OPticaL in
aUX in
Connect to the digital (optical) output of an external device.
Connect to the Analog output of an external device.
ꢃ
Receives digital video and audio signals simultaneously using an
HDMI cable.
HDMi in JacK
HDMi OUt JacK
8
Outputs digital video and audio signals simultaneously using an
HDMI cable.
9
POWer sUPPLy
caBLe
Plug the power supply cable into the AC wall outlet.
10
▪ When you turn on the power of this unit, there will be a 4 to 5 second delay before it
produces sound.
▪ When disconnecting the power cable from the wall outlet, hold the plug.
Do not pull the cable.
▪ Do not connect this unit or other components to an AC outlet until all connections
between components are complete.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
remote control
tOUr Of tHe reMOte cOntrOL
POWeR BUttOn
Turns the Crystal Surround Air
Track on and off.
tV POWeR BUttOn
Turns your Samsung TV on and off.
POWER
TV POWER
Anynet+
SAt SOURCe
Press to select a connected SAT
source. (SAT:Surround Air Track)
SOUnD eFFeCt
Selects the Sound Effect:
(MUSIC, NEWS, DRAMA,
CINEMA, SPORTS, GAME, OFF
(Original Sound))
Anynet+ is a function that enables you
to control other Samsung Devices with
your Samsung TV's remote control.
SAT
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
SPeAKeR
SAT MUTE
SMART
This button allows you to choose to
listen to audio from the Air track or
your TV. (This function supports the
via an HDMI cable.)
VOLUME
SAt MUte
VOLUME
S/W LEVEL
AUDIO SYNC
SMARt VOlUMe, 3D SOUnD
Mutes the sound from the unit.
Press again to restore the sound
to the previous volume level.
Regulates and stabilizes the
volume level against a drastic
volume change.
This feature adds depth and
spaciousness to the sound.
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
VOlUMe
Adjusts the volume level of the unit.
RePeAt
Select Repeat File, All, Random.
TV SOURCE
TV VOL
S/W leVel, AUDIO SynC
TV CH
Adjusts the Subwoofer level.
Used to help sync video to audio
when connected to a digital TV.
DRC, DIMMeR
You can use this function to enjoy
Dolby Digital sound when
watching movies at low volume at
night (Standard, MAX, MIN).
You can control the brightness of
the Display.
TV
TV VOL
MUTE
AUtO POWeR
Synchronizes the Air Track to Optical
connection via the Optical jack so it
turns on automatically when you turn
on your TV.
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
COntROl BUttOn
tV InFO
Display current TV status.
Play, pause or stop playing
a Music file, or search for the
Music file next or back.
tV CHAnnel, tV VOlUMe
Switches between the available
TV channels.
Adjusts the TV volume level.
tV SOURCe
Press to select a connected TV's
video source.
tV exIt
tV PRe-CH
Exits TV (functions same as the
EXIT button of the TV remote
control)
Moves to the previous TV channel
tV MUte
Mutes the sound from the TV.
Press again to restore the sound
to the previous volume level.
▪ SAT stands for Surround Air Track, which is a Samsung’s proprietary name.
▪ The remote control can operate TVs made by SAMSUNG only.
▪ Depending on the TV you are using, you may not be able to operate your TV with this remote control. If you can't,
operate the TV using the TV's remote control.
Installing batteries in the Remote Control
1. Lift the cover at the back of
the remote control upward as
shown.
Install two AAA size batteries.
Make sure to match the “+” and “–” ends
of the batteries with the diagram inside the
compartment.
Replace the cover.
Assuming typical TV usage,
the batteries last for about
one year.
2.
3.
Operation Range of the Remote Control
You can use the remote control up to 23 feet (7 meters) in a straight line from the unit. You can also operate the
remote at a horizontal angle of up to 30° from the remote control sensor.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
instaLLing tHe WaLL MOUnt
You can use the wall mount bracket to mount this unit on a wall.
Installation Precautions
• Install on a vertical wall only.
• For the installation, avoid a location with high temperature or humidity, or wall that cannot sustain the
weight of the set.
• Check the strength of the wall. If the strength of the wall is insufficient for the product installation, make
sure to reinforce the wall before the installation.
• Check the material of the wall. If the wall is made of plaster board, marble, or iron board, purchase and
use the appropriate fixing screws or mollys.
• Connect cables from the unit to external devices before you install it on the wall.
•
Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
1. Place the wall mount bracket on a wall surface and then
secure it with two screws (not supplied).
If you are hanging the unit below a TV, be sure to install the
wall mount bracket so that the arrow ( ) is placed in the
center of the TV.
Also make sure the unit is at least two inches (5 cm)
below the TV.
2. Fit the unit into the corresponding slots of the wall mount
bracket. For secure installation, make sure the mounting
studs slide firmly down into the bottom of the slots.
1
ꢀ
3. The installation is complete.
ꢀ inches (ꢂ cm) or more
▪ Do not hang onto the installed unit and avoid any impact to the unit.
▪ Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause
an injury or damage to the product.
▪ When the unit is installed on a wall, please make sure that children do not pull any of the
connecting cables, as it may cause it to fall.
▪ For the optimal performance of a wall mount installation, keep the speaker system at least
2 inches (5 cm) away from the TV.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
cOnnecting tHe WireLess sUBWOOfer
The Subwoofer's linking ID is preset at the factory and the main unit and sub should link (connect wirelessly)
automatically when main unit is turned on. If the link indicator ( ) does not light when main unit and
subwoofer are turned on, please set the ID by following the process below.
1. Plug the power cords of the main unit and subwoofer into an AC power supply.
2. Press the ID Set button on the back of the subwoofer with a small, pointed object for 5 seconds.
•
The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
3. While the main unit is powered off (STANDBY mode),
POWER
TV POWER
POWER
TV POWER
SAT
SOURCE SOUND
SPEAKER
3D SOUND
press SAt MUte on the remote control for 5 seconds.
EFFECT
SAT MUTE
SMART
VOLUME
S/W LEVEL
SAT
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
VOLUME
AUDIO SYNC
4. The ID Set message appears on the main unit’s VFD.
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
5. To finalize the link, turn the main unit’s power on while the
TV
TV VOL
MUTE
subwoofer’s Blue LED blinks.
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
VOLUME
S/W LEVEL
AUDIO SYNC
•
•
•
The main unit and the subwoofer are now linked (connected).
The Link indicator (blue LED) on the subwoofer is turned on.
You can enjoy better sound from the wireless subwoofer by
selecting the sound effect. (See page 20)
▪
▪
Before moving or installing the product, be sure to turn off the power and disconnect the power
cord.
If the main unit is powered off, the wireless subwoofer will be in the standby mode and the
STANDBY LED on the upper side will come on after the Link indicator (Blue LED) blinks for 30
seconds.
▪
▪
If you use a device that uses the same frequency (2.4GHz) near the system, interference may
cause some sound interruption.
The transmission distance of the wireless signal between the main unit and sub is about 33 ft.,
but may vary depending on your operating environment. If a steel-concrete or metallic wall is
between the main unit and the wireless subwoofer, the system may not operate at all, because
the wireless signal cannot penetrate metal.
▪
If the main unit doesn't make a wireless connection, follow steps 1-5 above to retry the
connection between the main unit and wireless subwoofer.
▪
▪
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from
water and moisture.
For optimal listening performance, make sure that the area around the wireless subwoofer
location is clear of any obstructions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
instaLLing tHe tOrOiDaL ferrite On tHe HDMi in/OUt caBLe
Lift up to release the lock and open the core.
Close the lock back.
Wind both HDMI IN/OUT cables together, make one
turn around the core.
(Start winding at 5-10cm away from the plugs)
instaLLing tHe ferrite cOre On tHe aUDiO/UsB caBLe
Lift up to release the lock and open the core.
Close the lock back.
Place the audio cable or USB cable on the
opened core.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
cOnnecting tHe crystaL sUrrOUnD air tracK
HDMI is a standard digital interface for connecting to such devices as a TV, projector, DVD player, Blu-ray
player, set top box and more.
HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality
as it was originally created in the digital source.
HDMI IN
HDMi cable
H
D
M
I
I
N
Digital Devices
T
HDMI OUT
HDMi cable
H
D
M
I
O
U
HDMI In
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT
jack on your digital devices.
and,
HDMI OUt (HDMI)
•
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
▪ HDMI is an interface that enables the digital transmission of video and audio data with just
a single connector.
HDMI OUt (ARC)
•
The ARC function allows digital audio to output via the HDMI OUT (ARC) port.
It can be enabled only when the Air Track is connected to a TV that supports the ARC function.
•
Anynet+ must be turned on.
▪ This function is not available if the HDMI cable does not support CEC.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
cOnnecting tHe crystaL sUrrOUnD air tracK
This section explains two ways (digital and analog) of connecting the unit to a TV.
This unit is equipped with one optical digital jack and one audio analog jack for connecting a TV.
O
P
T
I
A
L
I
OPTICALIN
Optical cable (not supplied)
OPTICAL
OUT
AUX IN
A
U
X
I
BD/DVD player/
set-top box/
or
game console
or
AUDIO
OUT
White
Red
L
audio cable
R
OPtICAl In
Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device
.
or,
AUx In
Connect AUX IN (Audio) on the main unit to the AUDIO OUT of the TV or Source Device.
Be sure to match connector colors.
▪ Do not connect the power cord of this product or your TV to the wall outlet until all
connections between components are complete.
▪
▪
Before moving or installing this product, be sure to turn off the power and disconnect the
power cord.
If you select 'AUX' without connecting the Audio Cable, the set is turned off automatically after
20 minutes.
▪ If a TV or any device connected to Air Track with the optical cable is off and there is no
digital input, the Air Track is turned off after 20 minutes. (If there has been no input signal
for over 20 minutes from OPTICAL AUDIO IN the Air Track will be turned off.)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
functions
BASIC FUnCtIOnS
turning the power on/off
1. Press the POWeR ( ) button in the right corner of the front panel.
or,
Press POWeR on the remote control to turn on the power.
2. Press the POWeR ( ) button in the right corner of the front panel.
or,
Press POWeR on the remote control again to turn off the power.
POWER
TV POWER
POWER
TV POWER
SAT
SOURCE SOUND
SPEAKER
3D SOUND
EFFECT
SAT MUTE
SMART
VOLUME
S/W LEVEL
SAT
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
VOLUME
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
VOLUME
S/W LEVEL
AUDIO SYNC
Adjusting the volume
Press the VOlUMe +/– button in the right corner of the front panel.
or,
Press VOlUMe +/– on the remote control to increase or decrease the
volume level.
•
The numeric value of the volume level appears in the front panel display.
▪
▪
The volume level increases or decreases when you press VOLUME +/–.
POWER
SAT
TV POWER
POWER
TV POWER
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
If you want to enjoy the sound only from the Crystal Surround Air Track,
you must turn off the TV's speakers in the Audio Setup menu of your
TV. Refer to the owner's manual supplied with your TV.
SAT
VOLUME
S/W LEVEL
AUDIO SYNC
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
VOLUME
S/W LEVEL
AUDIO SYNC
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVAnCeD FUnCtIOnS
Using the input mode
You can select either D.IN, AUX, HDMI, BT input or USB input.
Press an appropriate button on the remote control to select a desired mode,
or press
to select one from: D.IN, AUX, HDMI, BT or USB mode.
input mode
Display
Optical Digital input
aUX input
D.IN
AUX
HDMI
BT
POWER
TV POWER
POWER
TV POWER
SAT
SOURCE SOUND
SPEAKER
3D SOUND
EFFECT
SAT MUTE
SMART
HDMi input
VOLUME
S/W LEVEL
SAT
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
VOLUME
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
BLUetOOtH mode
UsB mode
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
TV
USB
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
VOLUME
S/W LEVEL
AUDIO SYNC
The unit turns off automatically in the following situations:
D.In Mode: If no input source is entered for 20 minutes.
•
• Aux Mode: If no cable is inserted in the jack for 20 minutes.
• BT Mode: If no connection is made for 20 minutes.
• USB Mode: If the “NO USB” or “Stop” state lasts for 20 minutes.
▪ The ARC function is activated in D.IN mode if the unit is
connected to an ARC supporting TV.
▪ To turn off the ARC function, turn Anynet off.
▪ Use the provided cable if the USB flash memory is not available
directly in the unit.
USIng BlUetOOtH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth-compliant devices to easily interconnect with
each other using a short wireless connection.
•
A Bluetooth device may cause noise or malfunction, depending on usage, when:
-
-
-
A part of your body is in contact with the receiving/transmitting system of the Bluetooth device
or the Air Track.
It is subject to electrical variation from obstructions caused by a wall, corner or office
partitioning.
It is exposed to electrical interference from same frequency-band devices including medical
equipment, microwave ovens and wireless LANs.
•
•
Pair the Air Track with the Bluetooth device while maintaining a close distance.
The further the distance is between Air Track and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
•
•
In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
The Air Track has an effective reception range of up to 10 meters in all directions if there are no
obstacles. The connection will be automatically cut off if the distance is out of this range. Even
within this range, the sound quality may be degraded by obstacles such as walls or doors.
•
This wireless device may cause electric interference during its operation.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
to connect the Air track to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo
headset function.
1. Press the fUnctiOn button on the remote control of AirTrack to
display the Bt message.
•
You will see Wait for 4 seconds and then reaDy on the front display
of the Air Track.
2. Select the Bluetooth menu on the Bluetooth device you want to
connect. (refer to the Bluetooth device's user manual)
Connect
3. Select the Stereo headset menu on the Bluetooth device.
•
You will see a list of scanned devices.
4. Select "samsung Home audio" from the searched list.
•
•
When the Air Track is connected to the Bluetooth device, the device
name of the connected Bluetooth device, followed by Air Track will
display cOnn on the front display.
Bluetooth device
If the Bluetooth device has failed to be paired with Air Track, delete the
previous “SAMSUNG HOME AUDIO” found by the Bluetooth device and
make it search for Air Track again.
5. Play music on the connected device.
•
You can listen to the music playing on the connected Bluetooth device
over the Crystal Surround Air Track system.
•
In BT mode, Play/Repeat/Stop/Next/Back functions are not available.
▪ You may be required to enter a PIN code (password) when
connecting the Bluetooth device to the Air Track. If the PIN code
input window appears, enter <0000>.
▪ The Air Track only supports Middle Quality SBC data (up to
237kbps@48kHz), and does not support High Quality SBC data
▪ The AVRCP feature is not supported.
▪ Connect only to a Bluetooth device that supports the A2DP (AV)
function.
▪ You cannot connect to a Bluetooth device that supports only
the HF (Hands Free) function.
▪ Only one Bluetooth device can be paired at a time.
▪ Once you have turned off Air Track and the pairing is
disconnected, the pairing will not be restored automatically. To
reconnect, you must pair the device again.
▪ Search or connection may not be performed properly by Air
Track in the following cases:
- If there is a strong electrical field around Air Track.
- If several Bluetooth devices are simultaneously paired with
AirTrack
- If the Bluetooth device is turned off, not in place, or
malfunctions
- Note that such devices as microwave ovens, wireless LAN
adaptors, fluorescent lights, and gas stoves use the same
frequency range as the Bluetooth device, which can cause
electric interference.
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
to disconnect the Bluetooth device from Air track
You can disconnect the Bluetooth device from Air Track. For instructions, see
the Bluetooth device's user manual.
•
•
Air Track will be disconnected.
When Air Track is disconnected from the Bluetooth device, Air Track will
display DiscOn on the front display.
to disconnect Air track from the Bluetooth device
Press the (
) button on the front panel of Air Track to switch from Bt to
another mode or turn off Air Track.
•
•
The connected Bluetooth device will wait a certain time for a response
from Air Track before terminating the connection.
(Disconnection time may differ, depending on the Bluetooth device)
The currently connected device will be disconnected.
▪
In Bluetooth connection mode, the Bluetooth connection will be lost
if the distance between the Home Cinema System and the
Bluetooth device exceeds (10 meters). If the distance between
them returns to the effective range or you restart the Bluetooth
device, the Bluetooth connection can be restored.
▪
▪
If the Bluetooth device comes back into the effective range, you can
restart to restore the pairing with the Bluetooth device.
Air Track automatically turns off after 20 minutes in the Ready state.
to connect the Crystal Surround Air track to a
USB HOSt device
1. Connect the USB device to the USB port on the side of the unit.
2. Press the (
repeatedly until UsB appears.
Each time the button is pressed, the selection changes as follows :
D.IN AUX HDMI BT USB
) button on the front panel of the home cinema system
•
➡
➡
➡
➡
3. UsB appears on the display screen and then disappears.
•
•
The Crystal Surround Air Track connection is complete.
It automatically turns off (Auto Power Off) if no USB device has been
connected for more than 20 minutes.
Before you connect a USB device
Compatibility: USB storage.
• If the file name of a folder on a USB device exceeds 10 characters, it
is not displayed on the VFD.
• This product may not be compatible with certain types of USB
storage media.
• The file systems FAT16 and FAT32 are supported.
-
The NTFS file system is not supported.
• Connect a USB device directly to the USB port of the product.
Otherwise, you may encounter a USB compatibility problem.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not connect multiple storage devices to the product via a multi-
card reader. It may not operate properly.
• Digital camera PTP protocols are not supported.
• Do not remove the USB device while it is being read.
• DRM-protected music files (MP3, WMA) from a commercial web site
will not be played.
• External HDDs are not supported.
• Compatibility list
format
Music
file name
MP3
WMA
file extension
.MP3
.WMA
80~320
kbps
56~128
kbps
Bit rate
Version
-
V8
-
Pixel
-
sampling frequency
44.1KHz
44.1KHz
POWER
TV POWER
Play/Pause/Stop
SAT
SOURCE SOUND
SPEAKER
3D SOUND
EFFECT
SAT MUTE
SMART
VOLUME
S/W LEVEL
During playback, press the
+#,@ button.
VOLUME
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
TV NFO
•
Press the +
#
button again to stop playing the file temporarily.
button to play the selected file.
TV SOURCE
TV VOL
TV CH
TV
TV VOL
MUTE
Press the +
#
TV CH
TV SOURCE
TV PRE-CH
AH59-02434A
TV EXIT
•
To stop playback, press the Stop (@) button during playback.
POWER
SAT
TV POWER
Skip Forward/Back
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
During playback, press the [,] button.
VOLUME
S/W LEVEL
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
•
When there is more than one file and you press the ] button, the next file
is selected.
TV SOURCE
TV VOL
TV CH
TV
TV VOL
MUTE
TV CH
E
TV PRE-CH
AH59-02434A
TV EXIT
•
When there is more than one file and you press the [ button, the
previous file is selected.
VOLUME
S/W LEVEL
AUDIO SYNC
POWER
SAT
TV POWER
Using the RePeAt function
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
REPEAT
TV SOURCE
TV VOL
DRC
DIMMER AUTO POWER
VOLUME
Repeat playback allows you to repeatedly play a file, repeat all, randomly play
files, or turn Repeat off.
VOLUME
S/W LEVEL
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
TV SOURCE
TV VOL
TV CH
TV INFO
Press the RePeAt button.
TV CH
TV
TV VOL
MUTE
TV CH
• rePeat fiLe : Repeat playing a track
• rePeat aLL : Repeat playing all tracks
TV PRE-CH
AH59-02434A
TV EXIT
TV
TV VOL
MUTE
• rePeat ranDOM : Plays tracks in random order. (A track that has
already been played may be played again.)
POWER
SAT
TV POWER
• rePeat Off : Cancels Repeat Playback.
POWER
TV POWER
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
SAT
VOLUME
S/W LEVEL
AUDIO SYNC
SOUND
EFFECT
SPEAKER
SOURCE
▪
You can set the REPEAT function during the playback of music
from a USB drive.
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
3D SOUND
TV SOURCE
TV VOL
TV CH
VOLUME
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
VOLUME
S/W LEVEL
AUDIO SYNC
Muting the sound
This is useful when answering a doorbell or telephone call.
POWER
SAT
TV POWER
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
1. To mute sound of this unit, press the SAt MUte (
remote control.
) button of the
TV SOURCE
TV VOL
TV INFO
TV CH
VOLUME
S/W LEVEL
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
TV SOURCE
TV VOL
TV CH
TV
TV VOL
MUTE
2. To mute the TV, press the tV MUte button of the remote control.
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
3. Press SAt MUte (
VOlUMe +/–) to restore the sound.
)/ tV MUte on the remote control again (or press
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
19
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER
TV POWER
POWER
TV POWER
Using the 3D Depth Sound function
SAT
SOURCE SOUND
SPEAKER
3D SOUND
EFFECT
SAT MUTE
SMART
VOLUME
S/W LEVEL
SAT
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
VOLUME
AUDIO SYNC
The 3D sound feature adds depth and spaciousness to the sound.
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
Press 3D SOUnD on the remote control.
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
•
Each time the button is pressed, the selection changes as follows :
VOLUME
S/W LEVEL
AUDIO SYNC
3D SOUND LOW ➡ 3D SOUND HIGH ➡ 3D SOUND OFF
▪
When you turn on the 3D Depth Sound, the Sound Effect will
automatically change to OFF.
POWER
SAT
TV POWER
POWER
SAT
TV POWER
Using the SMARt VOlUMe function
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
This will regulate and stabilize the volume level against a drastic volume
change caused by a channel change or scene transition.
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
VOLUME
S/W LEVEL
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
Press SMARt VOlUMe on the remote control.
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
• Each time the button is pressed, the selection changes as follows :
VOLUME
S/W LEVEL
AUDIO SYNC
SMART VOLUME ON ➡ SMART VOLUME OFF
POWER
SAT
TV POWER
POWER
SAT
TV POWER
Using the Sound effect
You can select from 7 different sound modes - MUSIC, NEWS, DRAMA,
CINEMA, SPORTS, GAME, and OFF (Original Sound) - depending on the
type of sources you want to enjoy.
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
VOLUME
S/W LEVEL
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
Press SOUnD eFFeCt on the remote control.
VOLUME
S/W LEVEL
AUDIO SYNC
•
Select OFF mode if you want to enjoy the original sound.
▪
▪
We recommend that you select a Sound Effect based on the
source material and your personal taste.
When you choose the Sound Effect (except OFF), the 3D Depth
Sound will automatically be turned OFF.
POWER
SAT
TV POWER
Using the AUtO POWeR lInK function
REPEAT
TV SOURCE
TV VOL
DRC
DIMMER AUTO POWER
TV INFO
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
The Crystal Surround Air Track is automatically turned on when you turn on the
TV or any device connected to the Air Track with the optical cable.
VOLUME
S/W LEVEL
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
TV CH
TV SOURCE
TV VOL
TV CH
TV
TV VOL
MUTE
Press AUtO POWeR on the remote control of this unit.
TV
TV VOL
TV CH
MUTE
TV PRE-CH
AH59-02434A
TV EXIT
•
The Auto power link function turns on and off each time you press AUtO
POWeR.
aUtO POWer LinK
Display
POWER LINK ON
POWER LINK OFF
On
Off
▪
▪
If a TV or any device connected to Air Track with the optical cable is
off and there is no digital input, the Air Track is turned off after 20
minutes.
These functions are available only when the CEC is turned off.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER
TV POWER
POWER
TV POWER
Using the S/W leVel function
You can control the base volume with the S/W Level button on the Remote
control.
SAT
SOURCE SOUND
SPEAKER
3D SOUND
EFFECT
SAT MUTE
SMART
VOLUME
S/W LEVEL
SAT
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
VOLUME
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
1. Press the S/W leVel button on the Remote control.
TV
TV VOL
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
2. “SW 0” appears on the Display.
VOLUME
S/W LEVEL
AUDIO SYNC
3. Press “+” or “-” button on the leVel key if you want to increase or
decrease the subwoofer volume. You can set it from SW -6 to SW +6.
POWER
SAT
TV POWER
POWER
SAT
TV POWER
Using the AUDIO SynC function
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
SOUND
EFFECT
SPEAKER
3D SOUND
Video may look slower than the audio if Air Track is connected to a digital TV.
If this occurs, adjust the audio delay time to match the video.
SOURCE
VOLUME
S/W LEVEL
AUDIO SYNC
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
TV
TV VOL
MUTE
Press AUDIO SynC +/–. on the remote control of this unit.
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
VOLUME
S/W LEVEL
AUDIO SYNC
•
You can use + , - button to set the audio delay time between 0 ms and
300 ms.
▪
In USB mode or BT mode, the Audio Sync function may not work.
REPEAT
TV SOURCE
TV VOL
DRC
DIMMER AUTO POWER
TV INFO
POWER
SAT
TV POWER
Using the DRC function
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching
movies at low volume at night.
VOLUME
S/W LEVEL
AUDIO SYNC
TV CH
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
TV SOURCE
TV VOL
TV CH
TV
TV VOL
MUTE
TV
TV VOL
MUTE
Press DRC on the remote control of this unit.
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
•
Each time the button is pressed, the selection changes as follows :
DRC MIN ➡ DRC STANDARD ➡ DRC MAX
TV CH
REPEAT
TV SOURCE
TV VOL
DRC
DIMMER AUTO POWER
TV INFO
POWER
SAT
TV POWER
Using the DIMMeR function
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
This feature control the brightness of the Display.
VOLUME
S/W LEVEL
AUDIO SYNC
TV CH
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
Press DIMMeR on the remote control of this unit.
TV SOURCE
TV VOL
TV CH
TV
TV VOL
MUTE
TV
TV VOL
• Each time the button is pressed, the selection changes as follows :
MUTE
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
DIMMER ON
➡
DIMMER OFF
TV CH
POWER
SAT
TV POWER
POWER
SAT
TV POWER
Using the Anynet+(HDMI-CeC) function
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
VOLUME
SOUND
EFFECT
SPEAKER
SOURCE
VOLUME
S/W LEVEL
AUDIO SYNC
Anynet+ is a function that enables you to control other Samsung Devices
with your Samsung TV's remote control.
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
3D SOUND
TV SOURCE
TV VOL
TV CH
VOLUME
TV
TV VOL
MUTE
The Anynet+ function turns on and off each time you press Anynet+.
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
VOLUME
S/W LEVEL
AUDIO SYNC
1. Connect the product to a Samsung TV with the HDMI cable.
(See page 13)
2. Set the Anynet+ function on your TV to ON. (See the TV instruction
manual for more information.)
▪
▪
Depending on your TV, certain HDMI output resolutions may not
work.
Please refer to the user’s manual of your TV. Please check the
logo (If your TV has an
Anynet+ function.)
logo, then it supports
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER
TV POWER
POWER
TV POWER
SPeAKeR button
SAT
SOURCE SOUND
SPEAKER
3D SOUND
EFFECT
SAT MUTE
SMART
VOLUME
S/W LEVEL
SAT
SOUND
EFFECT
SPEAKER
3D SOUND
SOURCE
VOLUME
AUDIO SYNC
This button enables you to select between listening to audio from your
TV or audio from the Air Track when connected via HDMI.
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
SAT MUTE
SMART
TV SOURCE
TV VOL
TV CH
VOLUME
TV
TV VOL
MUTE
Press SPeAKeR on the remote control of this unit.
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
VOLUME
S/W LEVEL
AUDIO SYNC
aUDiO MODe sPeaKer
scroll Display
TV SPEAKER
AVR SPEAKER
TV SPEAKER
AVR SPEAKER
Display
TV SPK
HDMI
tV
HDMi in
a
ir
ir
t
rack
tV
rack
S MUTE
TV ARC
arc
a
t
POWER
SAT
TV POWER
Using the tV functions
SOURCE SOUND
EFFECT
SPEAKER
3D SOUND
SAT MUTE
SMART
TV SOURCE
TV INFO
TV VOL
VOLUME
TV CH
VOLUME
S/W LEVEL
AUDIO SYNC
1. Press tV SOURCe on the remote control of this unit.
REPEAT
DRC
DIMMER AUTO POWER
TV INFO
TV SOURCE
TV VOL
2. Press tV InFO on the remote control to display the TV channel
TV
TV CH
TV VOL
MUTE
TV
TV VOL
MUTE
information.
TV CH
TV PRE-CH
AH59-02434A
TV EXIT
TV CH
3. Press tV CH on the remote control to select the TV channel.
TV PRE-CH
AH59-02434A
TV EXIT
4. Press tV VOl on the remote control to increase or decrease the volume
level.
5. Use tV PRe-CH button to move to the previous TV channel in TV
mode.
6. To exit the TV menu, use the tV exIt button. (Functions same as the
EXIT button of the TV remote control)
▪ The remote control can operate TVs made by SAMSUNG only.
sOftWare UPgraDe
Samsung may offer upgrades for the Crystal
Surround Air Track's system firmware in the future.
If an upgrade is offered, you can upgrade the
firmware by connecting a USB drive with the
firmware upgrade stored on it to the USB port on
your Air Track.
Note that if there are multiple upgrade files, you must
load them onto the USB drive singly and use them to
upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung
call center to receive more information about
downloading upgrades files.
▪
▪
Insert a USB drive containing the firmware upgrade into the USB port on the back of the main unit.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being
applied. The main unit will turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
Depending on the manufacturer, the USB may not be supported.
▪
▪
▪
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting
Before requesting service, please check the following.
symptom
check
remedy
the unit will not turn on.
• Is the power cord plugged
into the outlet?
• Connect the power plug to
the outlet.
a function does not work when
the button is pressed.
• Is there static electricity in
the air?
• Disconnect the power plug
and connect it again.
sound is not produced.
• Is the unit properly
• Connect it correctly.
connected to your TV?
• Press the Mute button to
cancel the function.
• Is the Mute function on?
• Is the volume set to
minimum?
• Adjust the volume.
the Picture does not appear on a • Is the TV connected
• Connect it correctly.
tV when the function is selected.
properly?
the remote control does not
work.
• Are the batteries drained?
• Replace with new batteries.
• Operate at a close distance.
• Is the distance between
remote control and main
unit too far?
the sound from the left/right
channels are reversed.
• Are the left/right audio
output cables from the TV
connected properly?
• Check the left/right channel
and connect it/them
correctly.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
appendix
sPecificatiOns
HW-E450
Model name
Standby power consumption 0.45W
Main unit
Subwoofer
Main unit
Subwoofer
Main unit
Subwoofer
25.9W
Power
consumption
20W
1.9 kg
Weight
generaL
5.4 kg
906 x 45 x 70.1 mm
175 x 350 x 295 mm
Dimensions
(W x H x D)
Operating temperature range +5°C to +35°C
Operating humidity range
10 % to 75 %
Main unit
80W/CH, 4OHM, THD = 10%, 1kHz
120W, 4OHM, THD = 10%, 100Hz
570mV/20Kohm
Rated output
power
Subwoofer
Impedance
Input sensitivity/
S/N ratio (analog
Separation(1kHz)
aMPLifier
input)
70dB
65dB
Analog input
20Hz~20kHz(±3dB)
20Hz~20kHz(±3dB)
freQUency
resPOnse
Digital input/48kHz PCM
* S/N ratio, distortion, separation and usable sensitivity are based on measurement using AES (Audio
Engineering Society) guidelines.
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
[ recommendation ] - eU Only
Hereby, Samsung Electronics, declares that this Crystal Surround Air Track is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
In France, this equipment may only be used indoors.
ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care center.
Area
Contact Centre
0810 - SAMSUNG (7267864,
€ 0.07/min)
Web Site
Area
Contact Centre
Web Site
ALBANIA
42 27 5755
0900-SAMSUNG (0900-
7267864) (€ 0,10/Min)
NETHERLANDS
NORWAY
AUSTRIA
815-56 480
0 801-1SAMSUNG(172-678)
+48 22 607-93-33
808 20-SAMSUNG (808 20
7267)
08010 SAMSUNG (08010 726
7864) only from landline
(+40) 21 206 01 10 from mobile
and land line
0700 Samsung (0700 726
7864)
0800 - SAMSUNG(0800-726
786)
902 - 1 - SAMSUNG (902 172
(Dutch)
fr (French)
POLAND
BELGIUM
02-201-24-18
PORTUGAL
BOSNIA
05 133 1999
07001 33 11
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
ROMANIA
70 70 19 70
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG(726-7864
€ 0,14/Min)
8009 4000 only from landline
80111-SAMSUNG (80111 726
7864) only from land line
(+30) 210 6897691 from mobile
and land line
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
+381 0113216899
261 03 710
SERBIA
SLOVAKIA
GERMANY
CYPRUS
SPAIN
678)
SWEDEN
0771 726 7864 (SAMSUNG)
fr (French)
0848 - SAMSUNG(7267864,
CHF 0.08/min)
Switzerland
GREECE
U.K
EIRE
0330 SAMSUNG (7267864)
0818 717100
HUNGARY
ITALIA
KOSOVO
LUXEMBURG
MACEDONIA
MONTENEGRO 020 405 888
LITHUANIA
LATVIA
ESTONIA
8-800-77777
8000-7267
800-7267
023 207 777
correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg,
Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
(Waste electrical & electronic equipment)
correct Disposal of this Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working
life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Code No. AH68-02431C (00)
Download from Www.Somanuals.com. All Manuals Search And Download.
|