HT-F5500W
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Disc Storage & Management
• Holding Discs
Important Safety Instructions
-
Fingerprints or scratches on
a disc may reduce sound and picture
quality or cause skipping.
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
-
-
-
Avoid touching the surface of a disc where data has
been recorded.
Hold the disc by the edges so that fingerprints will
not get on the surface.
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Do not stick paper or tape on the disc.
• Cleaning Discs
Follow all instructions.
-
If you get fingerprints or dirt on a disc,
clean it with a mild detergent diluted in
water and wipe with a soft cloth.
Do not use this apparatus near water.
Clean only with a dry cloth.
-
-
When cleaning, wipe gently from the
inside to the outside of the disc.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Disc Storage
8.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including AV receivers) that produce heat.
Do not keep in direct sunlight.
Keep in a cool ventilated area.
Keep in a clean protection jacket and store
9.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
vertically.
Handling Cautions
• Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases, on
the apparatus.
• To turn this apparatus off completely, you must pull the
power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all
times.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
11. Only use attachments/accessories specified by the
manufacturer.
• Do not plug multiple electric devices into the same wall
socket. Overloading a socket can cause it to overheat,
resulting in a fire.
12. Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
• Before connecting other components to this product,
be sure to turn them off.
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
• If you move your product suddenly from a cold place
to a warm place, condensation may occur on the
operating parts and lens and cause abnormal disc
playback. If this occurs, unplug the product, wait for
two hours, and then connect the plug to the power
outlet. Then, insert the disc, and try to play back again.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
|
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
• If the product makes an abnormal noise or produces
a burning smell or smoke, turn off the power switch
immediately and disconnect the power plug from
the wall outlet. Then, contact the nearest customer
service center for technical assistance. Do not use the
product. Using the product as it is may cause a fire or
an electric shock.
This product uses Cinavia technology to limit the
use of unauthorized copies of some commercially-
produced film and videos and their soundtracks. When
a prohibited use of an unauthorized copy is detected, a
message will be displayed and playback or copying will
be interrupted.
More information about Cinavia technology is provided
at the Cinavia Online Consumer Information Center
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138, USA.”
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2010 Verance
Corporation. All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
License
Manufactured under license
from Dolby Laboratories.
Dolby, Pro Logic, and
the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent
No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535,
6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, DTS-HD, the Symbol, and DTS
or DTS-HD and the Symbol together are registered
trademarks & DTS Neo:Fusion is a trademark of DTS,
Inc. ©2012 DTS, Inc. All Rights Reserved.
- Open Source License Notice
In the case of using open source software, Open
Source Licenses are available on the product menu.
Using the 3D Function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
The terms HDMI and HDMI
High-Definition Multimedia
Read and understand the following safety information
before using the 3D function.
Interface, and the HDMI
• Some viewers may experience discomfort while viewing
3D TV such as dizziness, nausea, and headaches.
If you experience any such symptom, stop viewing 3D
TV, remove the 3D Active Glasses, and rest.
Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
• Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses, and
rest.
Oracle and Java are registered trademarks
of Oracle and/or its affiliates. Other names
may be trademarks of their respective
owners.
• A responsible adult should frequently check on children
who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing 3D
TV and rest.
This item incorporates copy protection technology
that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse engineering
and disassembly are prohibited.
• Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
Blu-ray Disc™, Blu-ray™, and the logos are trademarks
of Blu-ray Disc Association.
• Do not use the 3D function or 3D Active Glasses while
walking or moving around. Using the 3D function or 3D
Active Glasses while moving around may cause you to
bump into objects, trip, and/or fall, and cause serious
injury.
|
4
English
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product’s HDMI
OUT port using a high-speed HDMI cable. Put on 3D
glasses before playing the 3D content.
GETTING STARTED
6
7
Disk and Format Compatibility
Logos of Discs the Product can Play
• The product outputs 3D signals only through HDMI
cable connected to the HDMI OUT port.
10 Accessories
11 Front Panel
11 Rear Panel
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D video, you
can not change the resolution to your preference.
12 Remote Control
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not operate
properly in 3D play mode.
CONNECTIONS
14 Connecting the Speakers
• You must use a high-speed HDMI cable for proper
output of the 3D signal.
16 Attaching the Toroidal Ferrite Core to the Power
Cord of the Wireless Receiver Module (SWA-6000)
• Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if you
have a 46 inch screen, stay 138 inches (11.5 feet) from
the screen.
17 Connecting to TV/External Devices
18 Connecting to a Network Router
SETTINGS
• Place the 3D video screen at eye level for the best 3D
picture.
19 The Initial Settings Procedure
19 The Home Screen
• When the product is connected to some 3D devices,
the 3D effect may not function properly.
19 Accessing the Settings Screen
20 Settings Menu Functions
24 Networks and the Internet
27 Upgrading Software
• This product does not convert 2D content into 3D.
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of
the Blu-ray Disc Association.
MEDIA PLAY
Copyright
29 The All Content Screen
© 2013 Samsung Electronics Co.,Ltd.
29 Playing Commercial Discs
All rights reserved; No part or whole of this user’s manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.,Ltd.
29 Playing Files on a USB Device
30 Playing a Disc with User Recorded Content
30 Using the AllShare Network Function
31 Controlling Video Playback
34 Controlling Music Playback
38 Playing Photo Contents
39 Listening to Radio
39 Using the Special Effects Remote Control Buttons
Contents
NETWORK SERVICES
41 Logging In to Your Samsung Account
41 Before Using Movies & TV Shows or Apps
42 Using Movies & TV Shows
42 Using Apps
SAFETY INFORMATION
2
3
3
3
4
4
5
Warning
Precautions
Disc Storage & Management
Handling Cautions
License
46 Screen Mirroring
46 Using the Web Browser
49 Linking your Internet Service Accounts to the Product
Using the 3D Function
Copyright
49 BD-LIVE™
APPENDIX
50 Additional Information
53 Troubleshooting
56 Specifications
|
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Disk and Format Compatibility
Disc types and content your Product can Play
Media
VIDEO
Disc Type
Details
Blu-ray Disc
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
3D Blu-ray Disc
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have
been recorded and finalized, or a USB storage media containing MKV,
MP4 contents.
CD-RW/-R,
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB
storage media containing MP3 or WMA contents.
DVD-RW/-R,
MUSIC
PHOTO
BD-RE/-R
CD-RW/-R,
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB
storage media containing JPEG contents.
DVD-RW/-R,
BD-RE/-R
| NOTES |
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.
\
\
\
\
Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30
Mbps.
Playback may not work for some types of discs, or when you use specific operations, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if
necessary.
\
\
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc Types your Product cannot Play
• HD DVD
• DVD-RAM
• DVD-RW(VR mode)
• 3.9 GB DVD-R Disc for
Authoring.
• DVD-ROM/PD/MV-Disc, • Super Audio CD
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
etc
(except CD layer)
(CD-Gs play audio only,
not graphics.)
| NOTES |
This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow
specific or limited operation and provide only certain features during playback.
\
\
\
\
Please note that this is not a defect in the product.
Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because
disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter
difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for
additional information on playback restrictions.
Some commercial discs and DVD discs purchased outside your region may not play on this product.
|
6
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Region Code
Logos of Discs the Product can Play
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
do not match, the disc will not play.
The Region Number for this product is displayed on the
rear panel of the product.
Blu-ray Disc
BD-LIVE
3D Blu-ray Disc
Dolby
Region
Disc Type
Area
Code
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
A
Blu-ray Disc
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
B
India, China, Russia, Central
and South Asia.
C
1
2
3
DTS
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle
East, Egypt, South Africa,
Greenland
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
NTSC broadcast system
Java
in U.S.A, Canada, Korea,
Japan
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
DVD-VIDEO
| NOTES |
4
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
5
6
China
If the Region number of a Blu-ray Disc/DVDs
does not correspond to the Region number of this
product, the product cannot play the disc.
\
|
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Supported Formats
Video File Support
File
Frame rate
(fps)
Bitrate
(Mbps)
Container
Video Codec
Resolution
Audio Codec
Extension
MPEG4 SP/ASP
*.avi
*.mkv
*.asf
H.264 BP/
MP/HP
AVI
MKV
ASF
MP4
3GP
MOV
FLV
Dolby Digital
LPCM
*.wmv
*.mp4
*.3gp
*.vro
Motion JPEG
1920x1080
(WMV v7,v8,
MSMPEG4 v3 :
1280x720)
ADPCM
(IMA, MS)
AAC
Microsoft
30
MPEG-4 v3
*.mpg
6~30
*.mpeg
HE-AAC
WMA
Window Media
*.ts
*.tp
*.trp
VRO
VOB
PS
Video v7, v8, v9
Dolby Digital
Plus
MPEG2
MPEG1
VP6
MVC
VP8
*.mov
*.flv
MPEG(MP3)
DTS
TS
SVAF
*.vob
*.svi
4
60
20
640x480
*.m2ts
24/25/30
6~30
-
*.webm
Vorbis
WebM
1920x1080
-
-
Supports SVAF Top/Bottom, Side by Side Only
Supports BD MVC Spec Only
Limitations
-
Even when a file is encoded by a supported codec
listed above, the file might not be played if its content
is defective or corrupted.
Audio decoder
-
-
-
-
-
-
-
Supports WMA 10 Pro (Up to 5.1)
Does not support WMA lossless audio.
Supported ADPCM IMA, MS.
-
-
-
-
Normal playback is not guaranteed if the file's container
information is wrong or the file itself is corrupted.
Files having higher bit or frame rates than standard
may stutter when played back.
Does not support ADPCM (A-Law, μ-Low)
Does not support QCELP, AMR NB/WB
Supports vorbis (Up to 2ch),
The seek (skip) function is not available if the file's
index table is damaged.
When you playback a file remotely through a network
connection, video playback may stutter depending on
the network speed.
Supports Dolby Digital Plus (Up to 7.1ch)
Comments
-
-
-
-
-
MPEG4 : Supports up to GMC 1-Warping Point.
H.264 : Supports up to BP/MP/HP Level 4.1.
WMV : Supports V9, VC1 SP/MP/AP L3.
MPEG1 : Does not support D-picture.
-
Some USB/Digital camera devices may not be
compatible with the product.
Video decoder
-
Supports up to H.264 Level 4.1 (except for FMO/ASO/
MPEG2 : Supports up to Hight Profile High Level.
RS)
-
-
Does not support VC1 AP L4
| NOTES |
Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6
Below 1280 X 720: 60 frame max
Some MKV and MP4 format discs may not play,
\
depending on their video resolution and frame rate.
Above 1280 X 720: 30 frame max
-
Does not support GMC 2 or higher
|
8
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Music File Support
Notes on the USB connection
• Your product supports USB storage media, MP3
players, digital cameras, and USB card readers.
File
Audio
Container
Extension
Support Range
Codec
• The product does not support folder or file names
longer than 128 characters.
MPEG1
Audio
• Some USB/digital camera devices may not be
compatible with the product.
*.mp3
-
MP3
Layer 3
• Your product supports the FAT 16, FAT 32, and NTFS
file systems.
*.m4a
*.mpa
*.aac
• Connect USB devices directly to the product’s USB
port. Connecting through a USB cable may cause
compatibility problems.
AAC
-
MPEG4
• Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
Supports up to
2ch
*.flac
*.ogg
FLAC
FLAC
OGG
• The product does not support the PTP protocol.
Supports up to
2ch
• Do not disconnect a USB device during a “loading”
process.
Vorbis
• The bigger the image resolution, the longer the image
takes to display.
Supports WMA 10
Pro (Up to 5.1)
• This product cannot play MP3 files with DRM (Digital
Rights Management) downloaded from commercial
sites.
Does not support
WMA lossless
audio
*.wma
*.wav
WMA
WMA
• Your product only supports video that is under 30fps
(frame rate).
Supports up to M2
profile
• Your product only supports USB Mass Storage Class
(MSC) devices such as thumb drives and USB HDD.
(HUB is not supported.)
Does not
support LBR mode
• Certain USB HDD Devices, multi-card readers and
thumb drives may not be compatible with this product.
wav
midi
-
wav
midi
• If some USB devices require excessive power, they
may be limited by the circuit safety device.
*.mid
*.midi
type 0 and type 1
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a wall
socket. If the problem continues, contact the USB
HDD manufacturer.
Does not support
X13, NVT
*.ape
ape
ape
• SAMSUNG is not responsible for any data file damage
or data loss.
Picture File Support
File Extension
AVCHD
Type
Resolution
(Advanced Video Codec High Definition)
*.jpg
• This product can play back AVCHD format discs.
These discs are normally recorded and used in
camcorders.
15360x8640
JPEG
*.jpeg
*.png
*.bmp
*.mpo
4096x4096
4096x4096
15360x8640
PNG
BMP
MPO
• The AVCHD format is a high definition digital video
camera format.
• The MPEG-4 AVC/H.264 format compresses images
with greater efficiency than the conventional image
compressing format.
• Some AVCHD discs use the “x.v.Color” format. This
product can play back AVCHD discs that use the
“x.v.Color” format.
|
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
• “x.v.Color” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks of
Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
| NOTES |
Some AVCHD format discs may not play, depending
\
on the recording conditions.
AVCHD format discs need to be finalized.
\
“x.v.Color” offers a wider color range than normal DVD
\
camcorder discs.
Some MKV and MP4 format discs may not play,
\
depending on their video resolution and frame rate.
Accessories
Check for the supplied accessories below.
FUNCTION
TV
SOURCE
R
ECEIVER
BD
TV
SLEEP
1
2
5
8
0
3
6
9
4
7
D
I
S
T
I
T
L
U
P
O
P
U
P
M
UTE
T
U
/
N
C
I
H
N
G
T
V
SOUND
VOL
F
U
L
L
S
C
R
E
E
N
H
O
M
E
REPEAT
TOOLS
INFO
EXIT
RETURN
A
ER
M
E
M
O
R
Y
M
O
/
S
T
(For Power cord)
B
C
D
SMART
SEARCH
S
/
W
L
E
V
E
L
3
D
S
O
U
ND
HUB
MANUAL
A
U
D
I
O
S
U
B
T
IT
L
E
SOUN
D
PRESET
EFFECT
Remote Control
(AH59-02538A)/
Batteries (AAA size)
(4301-000116)
Toroidal Ferrite Core
(3301-000144)
Power Cable
FM Antenna
(AH42-00021A)
(3903-000598)
User Manual
Soft Cloth
(AH68-02575A)
(BN63-02368B)
Figures and illustrations in this User Manual
are provided for reference only and may differ
from actual product appearance.
|
10
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
VOLUME CONTROL
OPEN/CLOSE
PLAY/PAUSE
STOP
FUNCTION
DISC TRAY
DISPLAY
5V 0.5A
REMOTE CONTROL SENSOR
USB
POWER
| NOTES |
When the product is on, do not let children touch the product's surface. It will be hot.
To upgrade the product's software through the USB jack, you must use a USB flash drive.
When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the
\
\
\
button on the
6
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
button.
E
If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with
\
the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.
Rear Panel
* FM ANTENNA
COOLING FAN
AUX IN
HDMI OUT
HDMI IN
HDMI OUT
HDMI IN
SPEAKER OUTPUT
CONNECTORS
POWER CORD
EXTERNAL DIGITAL
LAN TERMINAL
AUDIO IN (OPTICAL)
* Connecting the FM Antenna
1.
2.
Connect the FM antenna supplied to the FM ANT Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
| NOTES |
Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation.
\
\
Do not obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
|
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Remote Control
Tour of the Remote Control
Press to select the home theater's
mode (HDMI, AUX, BD/DVD, etc.).
Turn the product on and off.
FUNCTION
or
TV
SOURCE
To change to Television mode
and control the TV, press the TV
button.
Press to select TV's video mode.
Set a Sleep time to shut off the
RECEIVER
product.
To change to Home Theater mode
and control the Home Theater,
press the BD button.
SLEEP
BD
TV
Press to open and close the disc
tray.
1
4
2
5
8
0
3
6
Press numeric buttons to operate
options.
7
9
DISC MENU
TITLE MENU
Use to enter the Popup menu/Title
menu.
POPUP
Press to view the disc menu.
Press to search backwards or
Press to skip backwards or
forwards.
forwards.
Press to stop/play a disc.
Press to pause a disc.
Cut off the sound temporarily.
MUTE
Search for active FM stations and
to change channels.
Press to output the audio signal to
the home theater speakers or the TV
speaker. (See page 40)
TUNING
Adjust the volume.
TV SOUND
HOME
VOL
/
CH
Press to move to the Home screen.
FULL SCREEN
REPEAT
Press to see the full screen
on a TV.
Allows you to repeat a title,
chapter, track or disc.
TOOLS
INFO
EXIT
Press to use the Tools menu.
Use to display the playback
information when playing
a Blu-ray/DVD disc.
Select on-screen menu items and
change menu values.
Press to exit the menu.
RETURN
A
Return to the previous menu.
Use to set a preset radio frequency.
TUNER
MO/ST
MEMORY
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
B
C
D
Select MONO or STEREO for radio
broadcasts.
SMART
SEARCH S/W LEVEL 3D SOUND
HUB
Press to use Smart Hub.
MANUAL
AUDIO
SUBTITLE SOUND
Press to apply the 3D sound effect.
Press to apply sound effects.
PRESET
EFFECT
Press to select MANUAL/
PRESET in the Tuner function.
Use to adjust the level of the
Press to search contents.
subwoofer.
Selects the disc Audio language.
Selects the disc subtitle language.
|
12
English
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Control Codes
Installing batteries in the Remote Control
Brand
Code
56, 57, 58
01, 15
Brand
Mitsubishi/MGA
MTC
Code
Battery size: AAA
18, 40, 59, 60, 75
Admiral
(M.Wards)
18
1
2
A Mark
Anam
AOC
NEC
18, 19, 20, 40, 59, 60
01, 02, 03, 04, 05, 06, 07,
Nikei
03
03
03
08, 09, 10, 11, 12, 13, 14
Onking
01, 18, 40, 48
57, 58, 81
Onwa
Bell & Howell
06, 07, 08, 09, 54, 66,
67, 73, 74
Panasonic
Penney
Philco
(M.Wards)
Brocsonic
Candle
59, 60
18
18
| NOTES |
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
Cetronic
Citizen
03
Make sure to match the “+” and “–” ends of the
batteries with the diagram inside the compartment.
Assuming typical TV usage, the batteries last for about
one year.
\
\
\
15, 17, 18, 40, 48, 54,
62, 72
03, 18, 25
Philips
Cinema
Classic
97
Pioneer
Portland
Proton
63, 66, 80, 91
15, 18, 59
03
Concerto
Contec
Coronado
Craig
18
The remote control can be used up to approximately
23 feet (7 meters) from the product in a straight line.
40
46
Quasar
06, 66, 67
15
Radio Shack
17, 48, 56, 60, 61, 75
Setting up the Remote Control
03, 05, 61, 82, 83, 84
18, 59, 67, 76, 77, 78,
92, 93, 94
RCA/Proscan
You can control certain functions of your TV with this
remote control.
Croslex
Crown
62
03
Realistic
Sampo
03, 19
40
To operate a TV with the Remote Control
Curtis Mates
CXC
59, 61, 63
03
00, 15, 16, 17, 40, 43,
46, 47, 48, 49,
1. Press the TV button to set the remote control to TV
Samsung
mode.
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
59, 60, 98
19, 61, 65
Daewoo
2.
3.
Turn on your TV.
Sanyo
Scott
Sears
Sharp
While holding down the POWER button, enter the
03, 40, 60, 61
15, 18, 19
Daytron
Dynasty
40
03
code corresponding to your brand of TV.
• If there is more than one code listed for your TV in
the table, enter one at a time to determine which
code works.
15, 57, 64
03, 15, 40, 46, 59, 61, 64,
Emerson
Signature 2000
82, 83, 84, 85
57, 58
(M.Wards)
Fisher
Funai
19, 65
03
• Example : For a Samsung TV
Sony
50, 51, 52, 53, 55
While holding down the POWER button, use
the number buttons to enter 00. If that does not
work, try 15, then 16, etc.
Soundesign
Spectricon
SSS
03, 40
01
Futuretech
03
General Electric
06, 40, 56, 59, 66, 67, 68
18
(GE)
4.
If the TV turns off, the setting is complete.
18, 40, 48, 54, 59, 60,
62
Hall Mark
Hitachi
Inkel
40
15, 18, 50, 59, 69
45
Sylvania
• You can use the TV POWER, VOLUME,
Symphonic
Tatung
61, 95, 96
06
CHANNEL, and Numeric buttons (0~9).
JC Penny
JVC
56, 59, 67, 86
70
| NOTES |
Techwood
Teknika
TMK
18
The remote may not be able to control some
\
03, 15, 18, 25
18, 40
KTV
59, 61, 87, 88
03, 15, 40
15
functions, depending on your brand of TV. Also, the
remote control may not work on some brands of TVs.
The remote control will work with Samsung TVs by
default.
KEC
Toshiba
Vidtech
Videch
19, 57, 63, 71
18
\
KMC
01, 15, 16, 17, 37, 38, 39,
59, 60, 69
LG (Goldstar)
Luxman
40, 41, 42, 43, 44
15, 17, 18, 40, 48, 54,
60, 64
Wards
18
19, 54, 56, 59, 60, 62, 63,
Yamaha
York
18
40
LXI (Sears)
65, 71
15, 17, 18, 48, 54, 59, 60,
62, 72, 89
Magnavox
Yupiteru
Zenith
03
58, 79
01
Marantz
Matsui
MGA
40, 54
54
Zonda
Dongyang
03, 54
18, 40
|
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
Place it on a stand or cabinet shelf, or
under the TV stand.
Front (R)
Selecting the Listening Position
Center
Subwoofer
The listening position should be located
about 2.5 to 3 times the TV's screen
size away from the TV. For example, if
you have a 46 inch screen, locate the
listening position 115 to 138 inches (9.6
to11.5 feet) from the screen.
Surround (R)
Product
Front (L)
Surround (L)
Wireless
Receiver Module
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the front speakers so that their tweeters will be at the same height as your ear. Align the
front face of the front speakers with the front face of the center speaker or place them slightly
in front of the center speakers.
Front Speakers
Center Speaker
It is best to install the Center Speaker at the same height as the front speakers. You can also
install it directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough room, place
these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above
your ear, facing slightly downward.
Surround
Speakers
* Unlike the front and center speakers, the surround speakers are used mainly for sound
effects. Sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
* Surround speakers must be connected to the wireless receiver module.
|
14
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Components
SWA-6000
Center
Speaker
Wireless Receiver
Module
Front x 2
Surround x 2
Speaker Cable x 3
Subwoofer
Cable x 2
Connecting The Speakers
1.
2.
Match each speaker cable bundle to the correct speaker by matching the color coded
plug on each bundle to the colored sticker on the bottom of each speaker.
To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, and then
release the tab.
Black
Red
b. Press down the black tab on the back of the speaker, insert the black wire, and then
release the tab.
3.
Connect the speaker wire plugs from each speaker to the back of the product by
matching the colors of the speaker plugs to the colors of the speaker jacks.
4. Connect the left and right surround speakers to the wireless receiver module.
Again, match the color of the plugs to the jacks on the wireless receiver module.
5. Plug the power cord of the wireless receiver module into a wall outlet.
6. Turn on the product. The product and wireless receiver module will now communicate with each other and you will
hear sound from the Surround speakers.
Front Speaker (R)
Front Speaker (L)
SPEAKERS OUT
Subwoofer
FRONT
R
FRONT
L
SUBWOOFER
CENTER
Center Speaker
Surround
Surround
Speaker (L)
Speaker (R)
AUX IN
FM ANT
SPEAKERS OUT
FRONT
R
FRONT
L
L
SUBWOOFER
CENTER
OPTICAL
R
DIGITAL
HD
AUDIO IN
Wireless Receiver Module
* This product should be connected with the SWA-6000 only.
|
English
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
| CAUTION |
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever you
\
want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw
or nail.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
\
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
\
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien
\
substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall using the duct (hole).
\
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.
\
For optimal listening performance, make sure that the area around the wireless receiver module location is clear of
\
any obstructions.
If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.
\
In 2-CH mode, you will hear no sound from the wireless surround speakers.
\
| NOTES |
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.
\
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to
\
the product, sound from the speakers may be disrupted because of interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses
\
the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.
The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but
\
may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product
and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal.
If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless
\
receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless
receiver module. Then, press and hold the “ID SET” button on the back of the wireless receiver module for 5
seconds, and then turn the product on.
Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless
Receiver Module (SWA-6000)
If you attach a Toroidal ferrite core to the power cord of the wireless receiver
module, it will help to prevent RF interference from radio signals.
1.
2.
3.
Pull the fixing tab of the Toroidal ferrite core to open it.
Make a loop twice in the wireless receiver module power cord.
Attach the Toroidal ferrite core to the wireless receiver module power
cord as the figure shows and press it until it clicks.
• Insert the ferrite core as close to the Wireless Receiver Module as
possible.
|
16
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to TV/External Devices
AUX IN
FM ANT
A
U
X
I
N
F
M
A
N
T
SPEAKERS OUT
POWER
LAN
FRONT
R
FRONT
L
L
SUBWOOFER
CENTER
OPTICAL
R
DIGITAL
HDMI OUT
HDMI IN
A
U
D
I
O
I
N
L
OPTICAL
R
DIGITAL
HDMI OUT
HDMI IN
AIN
Red
R
White
Method 1
Method 2
Method 3
W
External Devices
AUDIO OUT
OPTICAL OUT
HDMI OUT
HDMI IN
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your
TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control
and select HDMI as the external source of the TV.
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the
mode changes in this order : BD/DVD D. IN AUX HDMI FM BT
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the
external analog component. Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-
Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device.
Select the D. IN mode.
Method 3 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your
digital device. Select the HDMI mode.
| NOTES |
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported
\
|
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Wireless Network
Connecting to a Network Router
You can connect your product to your network router
using one of the methods illustrated below.
Wired Network
AUX IN
FM ANT
SPEAKERS OUT
POWER
LAN
FRONT
R
FRONT
L
L
SUBWOOFER
CENTER
OPTICAL
R
DIGITAL
HDMI OUT
HDMI IN
AUDIO IN
Wireless IP sharer
Broadband modem
(with integrated router)
Broadband
service
Broadband
service
Or
Router
| NOTES |
If your wireless IP router supports DHCP, this product
can use a DHCP or static IP address to connect to the
wireless network.
\
Broadband
service
Set your wireless IP router to Infrastructure mode. Ad-
hoc mode is not supported.
\
\
The product supports only the following wireless
security key protocols:
Broadband
modem
-
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Select a channel on the wireless IP router that is not
currently being used. If the channel set for the wireless
IP router is currently being used by another device
nearby, it will result in interference and communication
failure.
\
\
\
| NOTES |
Your router or your Internet Service Provider's policies
may prevent the product from accessing Samsung's
software update server. If this occurs, contact your
Internet Service Provider (ISP) for more information.
DSL users, please use a router to make a network
connection.
\
In compliance with the newest Wi-Fi certification
specifications, Samsung home theaters do not
support WEP, TKIP, or TKIP-AES (WPS2 Mixed)
security encryption in networks running in the 802.11n
mode.
\
\
To use the AllShare function, you must connect your
PC to your network as shown in the illustrations on the
above.
Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (AP
performance, distance, obstacles, interference by
other radio devices, etc).
The connection can be wired or wireless.
|
18
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Photos, Videos & Music : Play photos, videos
or music content from Disc, USB, PC or mobile
devices.
The Initial Settings Procedure
5
6
• The Home menu will not appear if you do not
configure the initial settings.
Settings : Set various functions to suit your
personal preferences.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
RED (A) : Press the RED (A) button on your
remote to create and/or log in to your personal
Samsung account.
• The access steps may differ depending on the
menu you selected.
7
The Initial Settings Procedure lets you set the OSD and
menu languages, configure the connection to your home
network, choose the aspect ratio output (screen size and
format) that is correct for your TV, and apply an upgrade
to your product's software, if one is available.
For complete Initial Settings instructions, see the Quick
Start Guide.
BLUE (D) : Set up the wireless mirroring
function between the home theater and a smart
phone or tablet.
Selecting an Option on the Home Screen
1.
To select an option on the Home screen, move the
cursor using the
buttons until it highlights
▲▼◄►
the option of your choice, and then press the
E
| NOTES |
button.
If you want to display the Initial Settings screen again
\
| NOTES |
and make changes, select Settings > System >
Setup in the Home screen or select the Reset option.
(See page 22)
If you leave the product in the stop mode for more
\
than 5 minutes without using it, a screen saver will
appear on your TV. If the product is left in the screen
saver mode for more than 20 minutes, the power will
automatically turn off.
The Home Screen
Accessing the Settings Screen
4
5
Movies & TV
Shows
Apps
Photos,
Videos &
Music
1.
Select Settings on the Home screen, and then
press
. The Settings screen appears.
E
1
Display
2
3
6
7
Display
Add App
Add App
Add App
Web Browser
Settings
3D Settings
Audio
TV Aspect Ratio
16:9 Original
On
Samsung Account
Screen Mirroring
a
d
Network
Smart Features
System
BD Wise
Resolution
Auto
Movie Frame (24Fs)
DVD 24Fs Conversion
Smart Hub Screen Size
Auto
Off
Support
Movies & TV Shows : Download movies and
Size 3
TV Shows from the Internet.
1
| NOTES |
Depending on your country, this menu
\
2.
To access the menus, sub-menus, and options
on the Settings screen, please refer to the remote
control illustration on the next page.
function may not be supported.
Recommended Apps : A list of useful and
2
3
4
popular apps we recommend you download.
Web Browser : You can access the Internet
using the Web Browser application.
Apps : Download/Access various for pay or
free-of-charge applications.
|
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Buttons on the Remote Control Used
for the Settings Menu
Lets you adjust the output of the
product to the screen size of your
TV. See page 50.
TV Aspect
Ratio
FULL SCREEN
HOME
REPEAT
BD Wise is Samsung’s latest inter-
connectivity feature.
1
2
When you connect a Samsung
product and a Samsung TV with BD
Wise to each other via HDMI, and
BD Wise is on in both the product
and TV, the product outputs video at
the video resolution and frame rate
of the Blu-ray/DVD Disc.
TOOLS
INFO
BD Wise
3
4
RETURN
EXIT
TUNER
MEMORY
MO/ST
Lets you set the output resolution of
HOME Button : Press to move to the Home
the HDMI video signal to
1
screen.
BD Wise, Auto, 1080p, 1080i,
720p, 480p. The number indicates
the number of lines of video per
frame. The i and p indicate interlaced
and progressive scan, respectively.
The more lines, the higher quality.
Resolution
RETURN Button : Return to the previous menu.
2
3
4
(Enter) / DIRECTION Button :
E
• Press
to move the cursor or select
button to activate the currently
▲▼◄►
an item.
• Press the
Setting the Movie Frame (24Fs)
feature to Auto lets the product
adjust its HDMI output to 24 frames
per second automatically for
improved picture quality if attached
to a 24Fs compatible TV.
E
selected item or confirm a setting.
EXIT Button : Press to exit the current menu.
Movie Frame
(24Fs)
Detailed Function Information
• You can enjoy the Movie Frame
(24Fs) feature only on a TV
supporting this frame rate.
Each Settings function, menu item, and individual option
is explained in detail on-screen. To view an explanation,
use the ▲▼◄►buttons to select the function, menu
item, or option. The explanation will usually appear on the
right of the screen.
• Movie Frame is only available
when the product is in the HDMI
1080p output resolution modes.
A short description of each Settings function starts on
this page. Additional information on some of the functions
is also in the Appendix of this manual.
Converts DVD playback to 24
frames per second and outputs it via
HDMI. This option is only available
when Movie Frame (24Fs) is set to
on.
DVD 24Fs
Conversion
Settings Menu Functions
Smart Hub
Lets you select the optimal size for
Display
Screen Size
the Smart Hub Screen.
Set up the 3D related functions.
Lets you set the color space format
for the HDMI output to match the
capabilities of the connected device
(TV, monitor, etc).
3D Blu-ray Playback Mode:
Select whether to play a Blu-ray
Disc with 3D contents in 3D Mode.
If you move to the Home or Smart
Hub Home menu while in 3D
mode, the product will switch to 2D
automatically.
HDMI Color
Format
Lets you set the product to output
video from the HDMI OUT jack with
Deep Color. Deep Color provides
more accurate color reproduction
with greater color depth.
3D Settings
HDMI Deep
Color
Screen Size: Enter the size of the
TV attached to the product. The
product will automatically adjust the
3D output to the screen size of the
TV.
|
20
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Lets you select which speakers you
want active, either the TV's speakers
or the home theater's speakers.
Progressive
Mode
Lets you improve picture quality
when viewing DVDs.
Speaker
Selection
Audio
Lets you direct the sound from the
TV to the Home Theater speakers.
Requires an HDMI connection and
an Audio Return Channel (ARC)
compatible TV.
Lets you configure the settings of
the speakers you have connected
to obtain the best possible surround
sound.
• If Audio Return Channel is set to
on and you are using an HDMI
cable to connect the product to
the TV, digital optical input will not
work.
Normal Mode: Select if you
have set up your speakers in the
recommended speaker layout with
the surround speakers next to or
behind the listening positions.
Audio Return
Channel
Simple
Speaker
Setup
• If Audio Return Channel is set to
auto and you are using an HDMI
cable to connect the product to
the TV, ARC or digital optical input
is selected automatically.
Simple Mode: Select if you have
put your surround speakers in front
of the listening position. Downmixes
the front sound to the surround
sound speakers.
Lets you set the Digital Output to
match the capabilities of the AV
receiver you’ve connected to the
product. For more details, please
refer to the digital output selection
table. (See page 52)
| NOTES |
DPLII, SFE, Virtual 7.1 will not
\
Digital Output
operate when the simple mode is
on.
Lets you adjust the following
speaker settings and turn the test
tone on and off so you can test the
speakers.
Lets you apply dynamic range
control to Dolby Digital, Dolby
Digital Plus, and Dolby TrueHD
audio.
Level: Lets you adjust the relative
loudness of each speaker from 6db
to -6db. For example, if you like
deep bass, you can increase the
loudness of the subwoofer by 6db.
Auto: Automatically controls the
dynamic range of Dolby TrueHD
audio, based on information in the
Dolby TrueHD soundtrack. Also
turns dynamic range control off for
Dolby Digital and Dolby Digital Plus.
Dynamic
Range
Speaker
Settings
Distance: Lets you adjust the
relative distance of each speaker
from the listening position up to 30
feet. The farther the distance, the
louder the speaker will be.
Control
Off: Leaves the dynamic range
uncompressed, letting you hear the
original sound.
Test Tone: Lets you run the Test
Tone function so you can test your
adjustments. Setting Test Tone to
On turns the Test Tone on. Setting it
to Off turns it off.
On: Turns dynamic range control on
for all three Dolby formats. Quieter
sounds are made louder and the
volume of loud sounds is reduced.
Lets you select the multi-channel
downmix method that is compatible
with your stereo system. You
can choose to have the product
downmix to normal stereo or in
surround compatible stereo.
Lets you configure the Equalizer
Equalizer
settings manually.
Downmixing
Mode
Lets you set the product so that
the volume remains stable when a
scene change occurs or when you
change the channel.
Smart Volume
|
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
When the product is attached to a
Smart Features
digital TV, lets you adjust the audio
delay so that the audio syncs with
the video. You can set the delay
between 0 and 300 milliseconds.
Lets you configure App notification
settings and view basic info about
your Apps.
Audio Sync
Push Notification Settings :
Receive notifications from selected
services.
Apps Settings
Network
Properties : See basic info about
Network
Status
Lets you check the current network
Apps.
and Internet status.
You can lock access to Video on
Demand (VOD) content based on its
rating.
Configure the network connection
so you can enjoy various features
such as Internet services or AllShare
Wi-Fi functionality, and perform
software upgrades.
Network
Settings
VOD Rating
Lock
| NOTES |
The default security PIN is 0000.
\
Lets you connect a Wi-Fi Direct
device to the product using a peer-
to-peer network, without the need
for a wireless router.
Depending on your country,
\
this menu function may not be
supported.
Note that if the product is connected
to a wireless network, it may be
disconnected when you use Wi-Fi
Direct.
Terms &
Lets you view the Smart Hub Terms
and Conditions and Privacy Policy.
Conditions,
Privacy Policy
Wi-Fi Direct
Resets all Smart Hub settings to
their default settings.
| NOTES |
Reset Smart
Hub
Text files, such as files with a .TXT
\
| NOTES |
or .DOC extension, will not display
when you are using the Wi-Fi
Direct function.
The default security PIN is 0000.
\
System
Lets you control which devices on
your network, such as smart phones
and tablets, can share content with
your TV.
AllShare
Settings
Lets you re-run the Initial Settings
procedure. See the Quick Start
Guide for details.
Setup
Lets you assign an identifying name
You can select the language you
prefer for the On-Screen menu, disc
menu, subtitles, etc.
to the product. You use this name
Device Name to identify the product when you are
connecting external Wi-Fi devices
Language
• The language you select for the
disc menu, disc audio, or subtitles
will only appear if it is supported
on the disc.
(smart phones, tablets, etc.) to it.
Set various BD-Live functions.
BD-Live allows you to access extra
features available on some Blu-ray
Discs if you are connected to the
Internet.
BD-Live
Settings
BD-Live Internet Connection :
Lets you fully allow, partly allow,
or prohibit a BD-Live Internet
connection.
BD Data Management : Manage
BD data downloaded from a BD-
Live service or Blu-ray Disc.
|
22
English
Download from Www.Somanuals.com. All Manuals Search And Download.
You can connect a wireless USB
keyboard or mouse to the USB port
on the front of the product.
The default security PIN is 0000.
Enter the default PIN to access
the security function if you haven't
created your own PIN.
Keyboard Settings: Lets you
configure a wireless USB keyboard
connected to the product.
BD Parental Rating : Prevents
playback of Blu-ray Discs with a
rating equal to or above a specific
age rating you enter unless the PIN
is entered.
| NOTES |
You can use the keyboard only
\
when a QWERTY keyboard
screen or window appears in the
Web Browser.
DVD Parental Rating : Prevents
playback of DVDs with a rating
above a specific numerical rating
you have set unless the PIN is
entered.
Mouse Settings : Lets you
configure a wireless USB mouse
connected to the product. You can
use the mouse in the product's
menu in the same way you use a
mouse on your PC.
Change PIN : Changes the 4-digit
PIN used to access security
functions.
Security
If you forget your PIN
To use a mouse with the
1.
2.
Remove any disc or USB
product's menu :
storage device.
1.
Connect the USB mouse to
Device
Press and hold the
button
5
the product
.
Manager
on the front panel for 5
seconds or more.
2.
Click the primary button you
selected in Mouse Settings.
The Simple Menu appears.
All settings will revert to the
factory default settings.
3.
Click the menu options you
| NOTES |
want.
When the factory default settings
\
are restored, all the user stored
| NOTES |
BD data is deleted.
Some USB HID keyboards and
\
mice may not be compatible with
your product.
You can specify the display
brightness and time zone.
Some HID keyboard keys may
not work.
\
\
\
\
Front Display : Lets you change
the brightness of the front panel.
Wired USB keyboards are not
supported.
General
Time Zone : You can specify the
time zone that is applicable to your
area.
Some applications may not be
supported.
Menu Transparency : Adjust the
If a wireless HID Keyboard does not
operate because of interference,
move the keyboard closer to the
product.
transparency of the menu box.
|
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Anynet+ is a convenient function
Networks and the Internet
that offers linked operations with
other Samsung products that have
the Anynet+ feature and lets you
control those products with one
Samsung TV remote. To operate
this function, you must connect this
product to an Anynet+ Samsung TV
using an HDMI cable.
When you connect this product to a network, you can
use network based applications and functions such as
Smart Hub and BD-LIVE, and upgrade the product's
software through the network connection. For more
information about accessing and using Internet services,
see the Network Services chapter of this manual on
pages 41~49. Instructions for configuring the network
cCoonnnefcitgiounrsitnargt bYeloowu.r Network Connection
If you want to use an Anynet+
(HDMI-CEC) function, please follow
the instructions below.
1)
2)
3)
Anynet+
If you didn't configure your network connection during the
initial settings procedure or you need to reset the network
connection, follow the directions below.
Connect the product to an
(HDMI-CEC)
Anynet+ (HDMI-CEC)-compliant
Samsung TV using HDMI Cable.
Before you begin, contact your Internet Service Provider
to find out if your IP address is static or dynamic. If it
is dynamic, and you have a wired or wireless network,
we recommend using the Automatic configuration
procedures described below.
Set the Anynet+ (HDMI-CEC)
feature to On in both the TV and
the product.
Search for and then select the
product in the TV's Anynet+
(HDMI-CEC) list. For more exact
instructions, see the Anynet+
section of the TV's user's
manual.
If you are connecting to a wired network, connect the
product to your router using a LAN cable before you start
the configuration procedure.
To begin configuring your network connection, follow
these steps:
1.
In the Home screen, select Settings, and then
Support
press the
button.
E
2.
3.
Select Network, and then press the
button.
E
When activated, lets Samsung
Call Center agents diagnose and
fix problems with the product
remotely. Requires an active Internet
connection. Remote Management
service might not be available in
some countries.
Select Network Settings, and then press the
E
button.
Remote
4.
Go to the instructions for Wired networks starting
below or the instructions for Wireless networks
starting on page 25.
Management
Wired Network
For more information about the
Software Update function, see
"Upgrading Software" on page 27.
Software
Update
K
Wired – Automatic
After following Steps 1 to 3 above:
Lets you set the Use mode. If you
are using the home theater at home,
always select Home. Store is for
retail display settings only.
1.
In the Network Settings screen, change Network
type to Wired. Then, select Connect and press
the E button. The product detects the wired
connection, verifies the network connection and
then connects to the network.
Use Mode
Contact
Provides contact information for
Samsung
assistance with your product.
2.
When it is done, highlight OK, and then press E
button.
Reverts all settings to their defaults
except for the network and Smart
Hub settings, and then starts the
Setup function. Requires that you
enter your security PIN. The default
security PIN is 0000
Reset
|
24
English
Download from Www.Somanuals.com. All Manuals Search And Download.
K
Wired - Manual
Wireless Network
If you have a static IP address or the automatic procedure
does not work, you'll need to set the Network Settings
values manually.
You can setup a wireless network connection in three
ways:
-
-
-
Wireless Automatic
Wireless Manual
WPS(PBC)
After following Steps 1 to 3 above:
1.
In the Network Settings screen, change Network
type to Wired. Then, select Connect and press the
E button.
Before you configure the wireless network connection,
disconnect any wireless network device currently
connected to the product or, if applicable, the product's
current wired connection.
The product searches for a network, and then
displays the connection failed message.
| NOTES |
K
Wireless - Automatic
If it is possible to connect the home theater to your
\
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 24:
network wirelessly, select Change Network at this
point, change the Network Type to Wireless, and
then go to the instructions for wireless networks on
page 25.
1.
In the Network Settings screen, change Network
type to Wireless. Then, select Connect and press
the E button.
The product searches for and then displays a list of
the available networks.
Network Settings
Wired network connection failed.
MAC Address
IP Address
Subnet Mask
Gateway
XX:XX:XX:XX:XX:XX
0. 0. 0.
0. 0. 0.
0. 0. 0.
0. 0. 0.
0
0
0
0
Network Settings
Select your network type.
DNS Server
Network type
Wireless
Unable to connect to the network. Try the following: check if your IP address is
set correctly in IP Settings. Contact your Internet Service Provider for more
information.
Wireless Network
si-ap
iptime
Change Network
IP Settings
Retry
Close
iptime5G
KIMING_VTOWER
TIAS
You can connect your TV to the
internet. Please select which
wireless network to use.
Please select your preference.
2.
Use the ◄► buttons to select IP Settings, and
then press the E button. The IP Settings screen
appears.
WPS(PBC)
Refresh
3.
4.
Select the IP Setting field, and then set it to Enter
2.
3.
Select the desired network, and then press the
button.
E
manually.
Select a value to enter (IP Address, for example),
and then press E. Use the number keypad on
your remote control to enter the numbers for the
value. You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote control
to move from entry field to entry field within a value.
When done with one value, press the E button.
On the Security screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting a
letter with ▲▼◄► buttons, and then pressing
E
button.
4.
When finished, select Done, and then press the
E
5.
6.
Press the ▲ or ▼ button to move to another value,
and then enter the numbers for that value following
the instructions in Step 4.
button. The product verifies the network connection
and then connects to the network.
| NOTES |
Repeat Steps 4 and 5 until you have filled in all
You should be able to find the security code or pass
\
values.
phrase on one of the set up screens you used to set
up your router or modem.
| NOTES |
You can get the Network values from your Internet
\
provider.
7.
When finished entering all the values, select OK,
and then press the E button. The home theater
verifies the network connection and then connects
to the network.
|
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
K
Wireless - Manual
9.
Press the ▲ or ▼ button to move to another value,
and then enter the numbers for that value following
the instructions in Step 8.
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the Network
Settings values manually.
10. Repeat Steps 8 and 9 until you have filled in all
After following Steps 1 to 3 in "Configuring Your Network
values.
Connection" on page 24:
| NOTES |
1.
In the Network Settings screen, change Network
type to Wireless. Then, select Connect and press
the E button.
You can get the Network values from your Internet
\
provider.
The product searches for and then displays a list of
11. When finished, select OK, and then press the
E
the available networks.
button. The Security Screen appears.
2.
Scroll through the list, select the desired network or
12. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter numbers
directly using the number buttons on your remote
control. Enter letters by selecting a letter with the
Add Network, and then press the
button.
E
3.
4.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
▲▼◄► buttons, and then pressing the
button.
E
Enter your wireless network or wireless router's
name.
13. When finished, select Done at the right of the
screen, and then press the
button. The product
E
• Enter numbers directly using the number buttons
on your remote control.
verifies the network connection and then connects
to the network.
• Enter letters by selecting a letter with the ▲▼◄►
14. After the home theater verifies the network, select
buttons, and then pressing the
button.
E
OK, and then press the
button.
E
• To display capital letters (or redisplay small letters
if capital letters are displayed), select , and
then press the button.
| NOTES |
E
You can also begin the Manual Network setting by
\
• To display symbols and punctuation, select
going to Settings >Network > Network Status.
123#&, and then press the
button. To
E
K
WPS(PBC)
redisplay letters, select 123#&, and then press
the E button.
One of the easiest ways to set up the wireless network
connection is using the WPS(PBC) function. If your
wireless router has a WPS(PBC) button, follow these
steps:
When finished, select Done, and then press the
E
button.
5.
6.
On the Security type screen that appears, use the
After following Steps 1 to 3 in "Configuring Your Network
▲▼buttons to select the network's Security type,
Connection" on page 24:
and then press the
button. On the next screen,
E
enter your network's security code or pass phrase.
1.
In the Network Settings screen, change Network
type to Wireless. Then, select Connect and press
the E button.
• Enter numbers directly using the number buttons
on your remote control.
The product searches for and then displays a list of
the available networks.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
2.
3.
Scroll the list down, select WPS(PBC), and then
When finished, select Done, and then press the
E
press the
button.
E
button. The product searches for the network.
Press the WPS(PBC) button on your router within
two minutes. Your product automatically acquires all
the network settings values it needs and connects
to your network.
The Network connection fail screen appears. Use
◄► buttons to select IP Settings, and then press
the E button.
7.
8.
Select the IP Setting field, and then set it to Enter
The product connects to the network after the
network connection is verified.
manually.
Select a network value to enter (IP Address, for
example), and then press E button. Use the
number keypad on your remote control to enter the
numbers for the value. You can also enter numbers
using the ▲▼ buttons. Use the ◄► buttons on the
remote control to move from entry field to entry field
within a value. When done with one value, press the
E button.
4.
When it is done, highlight OK, and then press E
button.
| NOTES |
For WPS connection, set your wireless router’s
\
security encryption to AES. Setting to WEP security
encryption does not support WPS connection.
|
26
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Wi-Fi Direct
• The PBC and PIN procedures connect devices
automatically.
The Wi-Fi Direct function allows you to connect Wi-Fi
Direct devices to the product and each other using a
peer-to-peer network, without a wireless router.
Through the Product Using PBC
1.
2.
Select the Wi-Fi Direct device you want to connect
| NOTES |
to this product, and then press the
button.
E
Some Wi-Fi Direct devices may not support the
\
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
AllShare function if connected via Wi-Fi Direct. If this is
the case, change the network connection method you
used to connect the device to the home theater.
Wi-Fi Direct transmissions can interfere with the
\
Bluetooth signal. Before you use the Bluetooth
function, we strongly recommend that you turn off
the Wi-Fi Direct function on any device in which it is
currently on.
Through the Product Using a PIN
1.
Select the Wi-Fi Direct device you want to connect
to this product, and then press the
The PIN pop-up appears.
button.
E
1.
2.
Turn on the Wi-Fi direct device and activate its Wi-Fi
2.
3.
Direct function.
Note the PIN code in the pop-up, and then enter it
into the appropriate field in the Wi-Fi Direct device
you want to connect.
In the Home screen, select Settings, and then
press the
button.
E
3.
4.
Select Network, and then press the
button.
E
4.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
Select Wi-Fi Direct, and then press the
button.
E
The Wi-Fi Direct devices that you can connect
appear.
| NOTES |
Wi-Fi Direct
Device Name : [HTS]-F5500W
The current wired or wireless network connection
\
Select your Wi-Fi Direct device to connect to.
will be disconnected when you use the Wi-Fi Direct
function.
AndroidXXXXXXX
Disconnected
Text files, such as files with a .TXT or .DOC extension,
\
will not display when you are using the Wi-Fi Direct
function.
Refresh
Close
Upgrading Software
The Software Update menu allows you to upgrade the
product’s software for performance improvements or
additional services.
5.
You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
• Never turn the product off or back on manually
during the update process.
Each is covered below.
1.
In the Home menu, select Settings, and then press
the
button.
E
Through the Wi-Fi Device
2.
3.
Select Support, and then press the
button.
E
1.
2.
On the Wi-Fi device, follow the device's procedure
for connecting to another Wi-Fi Direct device. See
the device's user manual for instructions.
Select Software Update, and then press the
E
button.
4.
To download update software and update now,
When you have completed the procedure, you
should see a pop-up on your TV screen saying that
a device that supports Wi-Fi Direct has requested to
select Update now, and then press the
button.
E
See "Update now" on the next page for details.
connect. Select OK, and then press the
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
onnected.
button
E
5.
To let the product download update software
to accept.
automatically when available, select Auto Update,
3.
and then press the
button. See "Auto Update"
E
on the next page for details.
|
English
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
| NOTES |
2.
Select On or Off.
If you select On, the product will automatically
download new upgrade software when it is in Auto
Update mode with the power off. If it downloads
new upgrade software, the product will ask you if
you want to install it when you turn the product on.
The upgrade is complete when the product turns off,
\
and then turns on again by itself.
Samsung Electronics takes no legal responsibility for
\
product malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
| NOTES |
If you want to cancel the upgrade while the upgrade
\
To use the Auto Update function, your product must
\
software is downloading, press the
button.
E
be connected to the Internet.
When a system upgrade is in progress, "UPDATE" is
displayed on the front panel.
\
Update by USB
Update now
1.
2.
3.
You can use Update now to update the software through
your network connection or by using a USB flash drive.
The network instructions are below. The USB flash drive
instructions are on this page.
Click SUPPORT on the top right of the page.
Enter the product's model number into the search
field. As you enter the model number, a drop down
will display products that match the model number.
1.
2.
3.
Select Update now, and then press the
button.
E
4.
5.
Left click your product's model number in the drop
The Update now pop-up appears.
down list.
The product searches on line for the latest software
On the page that appears, scroll down to and then
version.
click Firmware Manuals & Downloads.
If it does not find an update, the "There are no new
updates for you at the moment." pop-up appears.
6.
7.
Click Firmware in the center of the page.
Click the ZIP button in the File column on the right
Press the
button to exit.
E
side of the page.
4.
5.
6.
If it finds a new version, the Update Request pop-
up appears.
8.
Click Send in the first pop-up that appears.
Click OK in the second pop-up to download and
save the firmware file to your PC.
Select OK. The product upgrades the software,
turns off, and then turns on automatically.
9.
Unzip the zip archive to your computer. You should
have a single folder with the same name as the zip
file.
If you do not select OK or Cancel in one minute,
the product stores the new upgrade software. You
can upgrade the software later using Auto Update.
7.
If you select Cancel, the product cancels the
10. Copy the folder to a USB flash drive.
upgrade.
11. Make sure no disc is inserted in the product, and
then insert the USB flash drive into the USB port of
the product.
| NOTES |
When the system upgrade is done, check the
\
\
12. In the product’s menu, go to Settings > Support >
software details in the Product Information section of
the Contact Samsung screen.
Software Update.
13. Select Update now.
Do not turn off the product during the Software
Update. It may cause the product to malfunction.
14. The product searches for the software on the
USB drive. When it finds the software,the Update
Request pop-up appears.
Auto Update
You can set the Auto Update function so that the product
downloads new upgrade software when it is in Auto
Update mode.
15. Select OK. The product upgrades the software,
turns off, and then turns on automatically.
| NOTES |
In Auto Update mode, the product is off, but its Internet
connection is active. This allows the product to download
upgrade software automatically, when you are not using it.
There should be no disc in the product when you
\
upgrade the software using the USB jack.
When the system upgrade is done, check the
\
1.
Press the ▲▼ buttons to select Auto Update
software details in the Product Information section of
the Contact Samsung screen.
Mode, and then press the
button.
E
Do not turn off the product during the software
\
upgrade. It may cause the product to malfunction.
Software upgrades using the USB jack must be
\
performed with a USB flash drive only.
|
28
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Your home theater can play content located on Blu-ray/
DVD/CD discs, USB devices, PCs, smart phones, tablets,
and on the Web.
Movies & TV
Shows
os,
Vides &
Musc
To play content located on your PC or a mobile device,
you must connect the PC or mobile device and the
product to your network. To play content on your PC, you
must also download and install AllShare network software
or already have DNLA network software on your PC.
New device connected.
USB Flash Disk
Videos
Photos
Music
All
Add App
Add App
Add App
Web Browser
Settings
| NOTES |
PCs running Windows 7 and Windows 8 have DLNA
\
software (Play To) built in.
| NOTES |
If the pop-up does not appear, go to Method 2.
\
3.
The All Content Screen
Use the ▲▼ buttons to select Videos, Photos,
For all media, the All Content screen or one of its sub
screens is your primary means of accessing and playing
contents saved on a variety of devices, either connected
Music or All, and then press the
button.
E
Depending on how the contents are arranged, you
will see either folders, individual files, or both.
dUirsecintlygorthuseingAyloluCr noentwtoernk.t Screen
| NOTES |
Even though the product will display folders for all
\
content types, it will only display files of the Content
Type you selected in Step 3. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to
the AllShare Play screen, and then going to Step 4 in
Method 2 below.
To access the All Content screen, select Photos, Videos
& Music on the Home screen, and then press the
E
button.
Playing Commercial Discs
4.
5.
6.
7.
If necessary, use the ▲▼◄► buttons to select a
1.
2.
Press the button to open the disc tray.
folder, and then press the
button.
E
Place a disc gently into the disc tray with the disc’s
label facing up.
Select a file to view or play, and then press the
E
button.
Press the RETURN button to exit a folder or the
Exit button to return to the Home screen.
Go to pages 31~38 for instructions that explain how
to control playback of videos, music, and pictures
on a USB device.
Method 2
3.
4.
Press the button to close the disc tray.
1.
2.
Turn the product on.
Playback starts automatically.
Connect the USB device to the USB port on the
If playback does not start automatically, press the
front panel of the product.
button on the remote or see “The All Content
6
3.
4.
Select Photos, Videos & Music on the Home
Screen” above.
screen, and then press the
button.
E
Select Photos, Videos, Music or All Content, and
Playing Files on a USB Device
then press the
button.
E
Depending on how the contents are arranged, you
There are two methods you can use to play or view
multimedia files located on a USB device through your
product.
will see either folders, individual files, or both.
| NOTES |
Even though the product will display folders for all
Method 1
\
content types, it will only display files of the Content
Type you selected in Step 4. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to the
AllShare Play screen and repeating Step 4.
1.
2.
Turn the product on.
Connect the USB device to the USB port on
the front panel of the product. The New Device
Connected pop-up appears.
|
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
5.
6.
7.
8.
Use the ◄► buttons to select the desired device
Using the AllShare Network
Function
and then press the
button.
E
If necessary, use the ▲▼◄► buttons to select a
folder, and then press the
button.
E
AllShare lets you play Videos, Photos, or Music located
on your PC or your DLNA compatible device through the
product using a wireless network connection.
Press the RETURN button to exit a folder or the
Exit button to return to the Home screen.
Go to pages 31~38 for instructions that explain how
to control playback of videos, music, and pictures
on a USB device.
To Download the AllShare Software
To use AllShare with your PC, you must install AllShare
software on your PC. You can download the PC software
and get detailed instructions for using AllShare from the
Samsung.com website.
| NOTES |
If you insert a disc when playing a USB device
\
or phone, the device mode changes to "Disc"
automatically.
1.
2.
3.
Click Support at the top of the page.
If your cellular phone is DLNA compatible, you can
play contents without connecting a USB cable. See
"Using the AllShare Network Function" on page 30.
\
On the Support page, enter the model number of
your product into the Model Number field, and then
press the
button.
E
Playing a Disc with User Recorded
Content
4.
On the page that appears, click See All Downloads
on the left side of the screen under Downloads. The
Download Tab appears.
You can play multimedia files you have recorded on Blu-
ray, DVD, or CD discs.
5.
6.
On the Download Tab, click Software.
In the list of software, click the EXE button on the
1.
Place a user recorded disc into the disc tray with
the disc’s label facing up, and then close the tray.
The Device Connected pop-up appears.
right side of the AllShare line.
7.
8.
9.
In the pop-up that appears, click the Send button.
In the next pop-up, click Save File.
2.
Use the ▲▼ buttons to select the type of content
Find the AllShare install file on your disk, and then
double click the file.
you want to view or play - Videos, Photos, or Music
- and then press the
button.
E
10. In the pop-up that appears, click Run, and then
| NOTES |
follow the directions that appear on your screen.
Even though the product will display folders for all
content types, it will only display files of the Content
Type you selected in Step 2. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to the
Home screen and repeating Step 2.
\
Download the AllShare Installation/Instruction manual from
the same Software Tab by clicking the corresponding
PDF file symbol in the File column on the right. The file, in
PDF format, will download and open. You can view and/
or save the file.
3.
A screen appears listing the contents of the disc.
Depending on how the contents are arranged, you
will see either folders, individual files, or both.
Playing Content Located on your PC or
DLNA Device through the Product
4.
5.
6.
If necessary, use the ▲▼◄►buttons to select a
folder, and then press the
button.
E
PC
Product
Use the ▲▼◄► buttons to select a file to view or
play, and then press the
button.
E
Press the RETURN button one or more times to
exit a current screen, exit a folder, or to return to the
Home screen.
Play back
PC's files
Press the Exit button to return directly to the Home
AllShare Connection
Screen.
7.
Go to pages 31~38 for instructions that explain how
to control playback of videos, music, and pictures
on a disc.
1.
Connect the product, your PC, and/or your DLNA
compatible device to the same wireless network.
|
30
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Follow the directions in the AllShare software
Installation/Instruction manual to set up devices and
files for playing or viewing.
Controlling Video Playback
You can control the playback of video content located on
a Blu-ray/DVD disc, USB device, mobile device or PC.
Depending on the disc or contents, some of the functions
Select Photos, Videos & Music on the product's
Home screen, and then press the
AllShare Play screen appears.
button. The
E
dBeusctrtiboendsinothnis tmhaenuRalemmayontoet bCe aovnaitlarbolel.used
Select the type of content you want to play -
Photos, Videos, Music, or All Content - and then
press the
button.
E
for Video Playback
5.
6.
On the next screen, select AllShare, and then press
DISC MENU
TITLE MENU
the
button.
E
POPUP
0
In the list of AllShare connected devices that
appears, select your PC or other AllShare
1
2
compatible device, and then press the
button.
E
A screen listing the available files appears.
MUTE
HOME
7.
Select the file you want to play or view, and then
FULL SCREEN
REPEAT
press the
button.
E
3
Controlling the Playback of Content
Located on Your PC with your Smart
Phone
Using the disc menu, title menu, popup menu and
1
title list
During playback, press this button to
DISC MENU
PC
display the Disc menu.
Product
During playback, press this button to
display the Title menu.
TITLE
Play back
PC's files
MENU
• If your disc has a playlist, press the
View button to go to the playlist.
AllShare
Control PC's
Connection
POPUP
MENU
During playback, press this button to
files to Product
display the Popup menu.
Smart Phone
Playback related buttons
2
(Only available with Samsung phones supporting AllShare
The product does not play sound in Search, Slow, or
functionality.)
Step mode.
• To return to normal speed playback, press the
6
1.
2.
Connect the product, your PC, and your DLNA
compatible cellular phone to the same wireless
network.
button.
Starts playback.
6
Follow the directions in the AllShare software
Installation/Instruction manual to set up devices and
files for playing or viewing.
Stops playback.
5
Pauses playback.
7
3.
4.
On your computer, using the AllShare software,
During playback, press the
or
3
4
confirm your phone is connected.
button.
Fast Motion
Play
On the phone, select the file you want to view or
play, and then select the home theater system as
the playback device.
Each time you press the
or
3
4
button, the playback speed will
change.
5.
On the phone, start playback.
In pause mode, press the
Each time you press the
button.
4
4
Slow Motion
Play
button,
the playback speed will change.
In pause mode, press the
button.
7
7
Step Motion
Each time you press the
button, a
Play
new frame appears.
|
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
During playback, press the
or
Movie Note provides information
such as director, cast, synopsis,
etc.
1
2
button.
Skip Motion
Each time you press the
or
1
2
Play
Movie Note
button, the disc moves to the previous
-
Movie Note is available if the disc
includes Movie Note information
and is connected to a network.
or next chapter or file.
Repeat Playback
3
You can use the Search Scene
function during playback to view
or start a movie from the scene of
your choice.
1.
During playback, press the REPEAT button on the
remote control.
2.
Press the ▲▼ buttons to select Off, Title, Chapter,
All or Repeat A-B then press the
button.
E
| NOTES |
If the index information in the file
K
Repeat A-B
\
is damaged or the file does not
support indexing, you will not be
able to use the Search Scene
function.
1.
Press the
button at the point where you want
E
Search Scene
repeat play to start (A).
2.
3.
4.
Press the
button at the point where you want
E
repeat play to stop (B).
If you are using the DLNA
\
function after connecting to a
computer through your network,
Search Scene may not be
supported.
To return to normal play, press the REPEAT button
again.
Press the
button.
E
| NOTES |
If there is more than one movie on
the disc or device, select to start a
different title.
Depending on the disc, the screen may not display all
repeat options.
\
\
The screen may not display Chapter or Title
immediately. Continue to press the ▲▼ buttons until
your choice is inside the applicable field.
To return to normal play, press the REPEAT button
again, press the ▲▼ buttons to select Off, and then
1.
2.
Select Search Titles, and
Search Titles
then press the
button.
E
Use the ▲▼ buttons to select
\
\
\
a title, and then press the
E
button.
press the
button.
E
The screen may not display Repeat A-B immediately.
Continue to press the ▲▼ buttons until Repeat A-B is
inside the applicable field.
Select to play the chapter of your
choice.
1.
2.
Select Search Chapters, and
You must set point (B) at least 5 seconds of playing
time after point (A).
Search
then press the
button.
E
Chapters
Use the ▲▼ buttons to select
a chapter, and then press the
Using the TOOLS Menu
button.
E
During playback, press the TOOLS button.
Select to play the movie from a
selected time point.
Select to return to the beginning of
Play from the
Beginning
the movie, and then press the
button.
E
1.
2.
Select Search Time Bar, and
then press the
button.
E
Using the number buttons,
enter the time point you want
to go to, and then press the
Use 3D menu to select Side by
Side or Top Bottom option if the
3D content currently playing does
not properly appear in 3D mode.
Search Time
Bar
button.
E
3D
| NOTES |
| NOTES |
You can also use the ◄►
\
Use 3D menu for 3D contents
\
buttons to advance or rewind
the movie. The movie advances
or rewinds one minute each tme
you press the ◄► buttons.
only. If applied to 2D contents, it
may not be displayed properly.
|
32
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Select to repeat a title, chapter, or
specific section.
Select to set the Equalizer.
Equalizer
Settings
| NOTES |
-
-
-
-
Off : Select to return to normal
It only appears when equalizer
\
playback.
mode is on.
Title : Choose to repeat a
selected title.
Select to set the desired subtitle
Chapter : Choose to repeat a
language.
specific chapter.
-
You can also operate this
function by pressing the
SUBTITLE button on the remote
control.
Subtitle
Repeat A-B : Choose to repeat
a specific section.
1.
2.
Press the ▲▼ buttons to
select repeat A-B, and then
Subtitle
Settings
Select to set the desired subtitle
Repeat Mode
press the
Press the
button.
E
E
options.
button at the
To view a scene from another
angle. The Angle option displays
the number of angles available to
view (1/1, 1/2, 1/3, etc.).
point where you want repeat
play to start (A). Let the movie
play.
Angle
3.
Press the
button at the
E
point where you want repeat
BONUSVIEW
Video
play to stop (B).
Select to set the desired bonusview
option.
| NOTES |
BONUSVIEW
Audio
You must set point (B) at least
\
5 seconds of playing time after
Select to set the size of the video
image. Choose Original, Mode1
(larger), or Mode2 (largest).
point (A).
Full Screen
Select to set the picture mode.
-
-
-
-
Dynamic : Increases sharpness
Information
| NOTES |
Select to view video file information.
and brightness.
Standard : Choose this setting
for most viewing applications.
Depending on the disc or storage device, the Tools
menu may differ.
\
\
Movie : The best setting for
watching movies.
Video files with high bitrates of 20Mbps or more strain
the product’s capabilities and may stop playing during
playback.
Picture Mode
User : Lets you adjust the
sharpness and noise reduction
function respectively.
Using the View & Options Menus
| NOTES |
On the screen that lists the video files, use the ▲▼◄►
When you use the BD wise
\
buttons to select View or Options in the upper right, and
function, this menu will not
then press the
button.
E
appear.
Select to set the desired audio
language.
Videos
Audio
Displays all the folders with
In some cases when the product is
connected to a digital TV, the audio
signal may not synchronize with the
video signal. If this occurs, adjust
the audio delay time to match the
video signal.
videos by date. If you select
Date
a folder, and then press
E
button, displays all the videos
Audio Sync
in the folder by date.
View
Displays all the video files on
the media or storage device
by title.
Title
Equalizer
Mode
Select to use the Equalizer.
Displays all the folders on the
Folder
media or storage device.
|
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Play Selected lets you
button : Stops a track.
3
4
5
create a playlist by selecting
specific files to play. It works
essentially the same way for
all media. See Creating a
Playlist from a CD on page
35.
Fast Play (Audio CD (CD-DA) only)
Play
During playback, press the
Each time you press the
or
button.
3
or
4
Selected
button, the
3
4
playback speed will change.
button : Pauses a track.
5
6
7
Options
Select Send to upload
button : Plays the currently selected track.
6
selected files to apps (Picasa,
Facebook etc) or devices.
To use Send, you need to
establish an account with the
on-line site, and then log in
using the Log In function.
Send
Music Screen Controls
Options
TRACK 001
TRACK 002
TRACK 003
TRACK 004
TRACK 005
00:43
03:56
04:41
04:02
03:43
03:40
04:06
03:52
03:04
04:02
| NOTES |
Depending on the disc or storage device, the Options
View menus may differ. All options may not be
displayed.
\
TRACK 001
TRACK 006
TRACK 007
00:09
00:43
The View and Options menus are usually available
when you are viewing video files on a USB flash
drive, a PC, a disc you recorded yourself, or a mobile
device. They are usually not available if you are viewing
a commercial Blu-ray, DVD, or CD disc.
\
TRACK 008
TRACK 009
TRACK 010
off
off
Pause a track.
Play a track.
Controlling Music Playback
You can control the playback of music content located on
a DVD, CD, USB, mobile device or PC. Depending on the
disc or contents, some of the functions described in this
manual may not be available.
Move to the previous track.
Move to the next track.
Rewind the track.
Buttons on the Remote Control used
for Music Playback
Advance the track.
1
4
2
5
8
0
3
6
Repeat one track or all tracks.
Play tracks in random order.
,
1
1
7
9
DISC MENU
TITLE MENU
Display the Equalizer.
POPUP
4
Adjust the equalizer manually.
2
3
(Only when equalizer mode is on)
5
6
To access the controls, play a track, and then use the
▲▼◄► buttons to move to the control of your choice.
NUMBER buttons : If numbered tracks are
displayed, press the number of a track. The
selected track is played.
1
buttons : Move to the previous/next
1 2
track.
2
|
34
English
Download from Www.Somanuals.com. All Manuals Search And Download.
| NOTES |
Select to see content
information.
Information
Encoding
The Music Screen controls are only accessible when a
\
\
track is playing.
Select to manage the text
All controls do not appear at the same time.
encoding options.
Using the View & Options Menus
| NOTES |
On the screen that lists the music files, use the ▲▼◄►
Depending on the disc or storage device, the Options
menu may differ. All options may not be displayed.
\
buttons to select View or Options in the upper right, and
then press the
button.
E
Repeating Tracks on an Audio CD
Music
You can set the product to repeat tracks on an audio CD
(CD-DA/MP3).
Displays all the music
Track
tracks on the media or
1.
During playback, use the ▲▼◄► buttons to select
storage device.
in the lower left corner of the screen, and then
Displays all the music on
the media or storage by
album.
press the
button.
E
Album
Artist
2.
Use the ▲▼ to select the Repeat mode you want
- Off, One Song, or All - and then press the
E
button.
Displays all the music files
on the media or storage
device by artist
View
Options
TRACK 001
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
TRACK 009
TRACK 010
00:43
03:56
04:41
04:02
03:43
03:40
04:06
03:52
03:04
04:02
Displays all music on
the media or storage by
genre.
Genre
Folder
TRACK 001
Displays all the folders
on the media or storage
device.
00:09
00:43
off
off
Play Selected lets you
create a playlist by
selecting specific files to
play. It works essentially
the same way for all
media. See Creating a
Playlist on an Audio CD
on this page.
Play
Shuffling Tracks on an Audio CD
Selected
You can set the product to play tracks on an audio CD
(CD-DA/MP3) at random.
1.
During playback, use the ▲▼◄► buttons to select
in the lower left corner of the screen, and then
Select Send to upload
selected files to apps
(Picasa, Facebook etc)
or devices. To use Send,
you need to establish an
account with the on-line
site, and then log in using
the Log In function.
press the
button.
E
2.
Use the ▲▼ to set the Shuffle mode Off or On, and
then press the
button.
E
Options
Send
Creating a Playlist from a CD
1.
2.
With the Playback screen displayed, select the
Options button and then press the
button. The
E
Options menu appears.
The Ripping function
converts CD audio to the
mp3 format and saves
the converted files on a
USB device or the mobile
device connected to the
product. See Ripping on
page 36.
Use the
buttons to select Play Selected , and
ꢁꢂ
then press the
button. The Play Selected screen
E
appears.
Ripping
|
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
3.
Use the
buttons to select a track, and then
button. A check appears to the left of
8.
Use the ▲▼ buttons to select the device to store
the ripped files on, and then press the button.
ꢁꢂ
press the
E
E
the track.
| NOTES |
4.
5.
Repeat Step 3 to select and check additional tracks.
To remove a track from the list, move to the track,
Do not disconnect the device while ripping is in
progress.
\
and then press the
button again.The check on
E
9.
If you want to cancel ripping, press the
button
E
the track is removed.
and then select Yes. Select No to continue ripping.
6.
When done, press the
buttons to select Play,
ꢁꢂ
10. When ripping is complete, the “Successfully
and then press the
button. The Music Playback
E
Ripped.” message appears. Press the
button.
E
screen reappears listing only the tracks you
11. Press the RETURN button to go back to the
checked. The selected tracks play automatically.
Playback screen.
| NOTES |
| NOTES |
You can create a playlist with up to 99 tracks from
\
\
\
This function is not available with DTS Audio CDs.
\
Audio CDs (CD-DA).
This function may not be supported by some discs.
\
If you have created a playlist, Play Selected is
replaced by Edit Playlist on the Options menu.
On the Play Selected screen, you can also choose
Select All, Deselect All, and Cancel.
Ripping encodes music to the .mp3 format at
\
192kbps.
On the Ripping screen, you can also choose Select
\
All or Deselect All.
Use Select All to select all tracks. This cancels
~
- Use Select All to select all tracks and press the
E
your individual track selections. When you press
button. This cancels your individual track selections.
the RETURN button on your remote or select Play
and then press the
button, all tracks will appear
- Use Deselect All to deselect all selected tracks at
E
on the Music Playback screen, and the product will
once.
begin to play all tracks from Track 001.
Use Deselect All to deselect all selected tracks at
once. Then, select individual tracks or use Select
All to select all the tracks, and then press the
RETURN button on your remote or select Play and
Using Bluetooth
~
You can use a Bluetooth device to enjoy music with high
quality stereo sound, all without wires!
then press the
button. If you do not use Select
E
What is Bluetooth?
All or select individual tracks, the Playlist will not
change.
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect with each other easily
using a short wireless connection.
Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback
screen, the Playlist will be unchanged.
~
• A Bluetooth device may hum or malfunction:
Ripping
-
-
-
When a part of your body is in contact with the
receiving/transmitting system of the Bluetooth device
or the Home Theater.
1.
2.
Insert a USB device into the USB jack on the front
of the product.
When it is subject to electrical variation from
obstructions caused by a wall, corner or office
partitioning.
With the Playback screen displayed, select the
Options button and then press the
button.
E
The Options menu appears.
When it is exposed to electrical interference from
same frequency-band devices including medical
equipment, microwave ovens and wireless LANs.
3.
4.
Use the ▲▼ buttons to select Ripping, and then
press the
button. The Ripping screen appears.
E
• Pair the Home Theater with the Bluetooth device while
the two are close together.
Use the ▲▼ buttons to select a track, and then
press the
button. A check appears to the left of
E
the track.
• The further the distance is between the Home Theater
and the Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
5.
6.
Repeat Step 4 to select and check additional tracks.
To remove a track from the list, move to the track,
and then press the
button again. The check on
E
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
the track is removed.
7.
When done, select the Rip button using the ▲▼
buttons, and then press the
The Rip pop-up appears.
button.
E
|
36
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect only to a Bluetooth device that supports the
A2DP Profile.
• The Home Theater has an effective reception range of
up to 32.8 feet in all directions if there are no obstacles.
The connection will be automatically cut off if the
device is out of this range. Even within this range, the
sound quality may be degraded by obstacles such as
walls or doors.
\
Only one Bluetooth device can be paired at a time.
The search or connection functions may not work
properly in the following cases:
\
\
-
If there a strong electric field near or around the
home theater.
• This wireless device may cause electrical interference.
during its operation.
-
-
-
If several Bluetooth devices are simultaneously
paired with product.
To connect the Home Theater to a
If the Bluetooth device is turned off, not in place, or
malfunctions.
Bluetooth device
Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
and can cause electric interference.
Connect
To disconnect the Bluetooth device from
the Home Theater
You can disconnect the Bluetooth device from the Home
Theater. For instructions, refer to the Bluetooth device's
manual.
Bluetooth device
• When the Home Theater is disconnected from the
Bluetooth device, the Home Theater will display
DISCONNECTED on the front display.
Check if the Bluetooth device supports the Bluetooth
compliant stereo headset function.
1.
2.
Press the FUNCTION button on the remote control
To disconnect the Home Theater from the
of the product to display the BT message.
Bluetooth device
Select the Bluetooth menu on the Bluetooth device
you want to connect. For instructions, refer to the
Bluetooth device's manual.
Press the (
) button on the front panel of the Home
Theater to switch from BT to another mode or turn off the
Home Theater.
3.
4.
Select the Stereo headset menu on the Bluetooth
• Except when you disconnect the home theater by
changing functions, the connected Bluetooth device
will wait a certain time for a response from the
Home Theater before terminating the connection.
(Disconnection time may differ, depending on the
Bluetooth device.)
device.
• You will see a list of devices
Select "[HTS]Fxxxxx" from the searched list.
• When the Home Theater is connected to the
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of home theater will appear on the front
display of home theater.
| NOTES |
In Bluetooth connection mode, the Bluetooth
\
connection will be lost if the distance between the
Home Theater System and the Bluetooth device
exceeds 32.8 feet. When the Bluetooth device comes
back into effective range or you restart the Bluetooth
device, you have to pair the device and home theater
again to reconnect.
5.
Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Home
Theater system.
| NOTES |
In Bluetooth mode, the screen saver will start if
\
The Home Theater only supports Middle Quality SBC
\
the Bluetooth device stays in the Ready state for 5
minutes. To reconnect the Bluetooth device, turn off
the screen saver, and then connect the device. To turn
off the Screen saver, press any button on the remote
control (the Volume button, a number button, etc.)
data (up to 237kbps@48kHz), and does not support
High Quality SBC data ([email protected]).
The AVRCP feature is supported. It's functionality
will differ, depending on the specifications of the
connected device.
\
|
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
You can't enlarge the subtitle and PG graphic in the
full screen mode.
\
Playing Photo Contents
You can play photo contents located on a DVD, USB,
mobile device or PC.
Using the View and Options Menus
When You See the Photo File List
Using the Tools Menu
Photos
During playback, press the TOOLS button.
Groups all the photo files
Select to move to the previous
on the media or storage
Previous
picture.
Date
device by Date. Click a
group to see the photos in
that group.
Next
Select to move to the next picture.
Start / Stop
Select to play/pause the slide show.
Slide Show
View
Displays all the photo files
on the media or storage
device by title.
Title
Speed : Select to set a slide
show's speed.
Slideshow
Settings
Effects : Select to set a slide
Displays all the folders
on the media or storage
device.
show's special effects.
Folder
Select to enlarge the current
Zoom
picture. (Enlarge up to 4 times)
Starts the slide show.
Shows all the files in the
current folder, one after
Select to rotate the picture. (This will
rotate the picture either clockwise
or counter clockwise.)
Rotate
Slide Show another. If you want to
create a slide show with a
Background
Music
Select to listen to music while
selected group of photos,
viewing a slide show.
see Play Selected below.
Picture Mode
Play Selected lets you
-
-
-
-
Dynamic : Choose to increase
create a playlist by
Sharpness.
selecting specific files to
Play
play. It works essentially
the same way for all
media. See Creating a
Playlist on an Audio CD
on page 35.
Standard : Choose for most
Selected
viewing applications.
Options
Movie : This is the best setting
Settings
for watching movies.
User : Lets you adjust the
sharpness and noise reduction
function respectively.
Select Send to upload
selected files to on line
sites (Picasa, Facebook
etc) or devices. To use
Send, you need to
Information : Shows the picture
information.
Send
Customize your own personal
sound preferences using the
equalizer settings.
Equalizer
Mode
establish an account with
the on-line site, and then
log in using the Log In
function.
Equalizer
This function is only available when
Settings
Equalizer Mode is On.
| NOTES |
| NOTES |
Depending on the disc or storage device, the Options
menu may differ. All options may not be displayed.
\
Depending on the disc or storage device, the Options
menu may differ. All options may not be displayed.
To enable the background music function, the photo
file must be in the same storage media as the music
file. However, the sound quality can be affected by the
bitrate of the MP3 file, the size of the photo, and the
encoding method.
\
\
|
38
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Radio
Using the Special Effects Remote
Control Buttons
Using Buttons on the Remote Control
SOUND
1.
2.
Press the FUNCTION button to select FM.
SOUND EFFECT Function
EFFECT
Tune to the desired station.
• Preset Tuning 1 : Press the MANUAL/PRESET
Lets you select a mode that optimizes the sound.
button to select Preset and then press the
TUNING/CH (
) button to select the preset
,.
1.
Press the SOUND EFFECT button.
station.
2.
Press the ▲▼ buttons to select the desired
-
Before you can tune to preset stations, you
mode: DSP, Dolby Pro Logic II or SFE Mode.
must add preset stations to the product's
memory. See Presetting Stations below.
3.
Press the ◄► buttons to select the desired
sound effect.
• Manual Tuning : Press the MANUAL/PRESET
button to select Manual and then press the
K
DSP
TUNING/CH (
) button to tune to a lower or
,.
MP3 Enhancer Power Bass Football
higher frequency.
Virtual 7.1 Off
• Automatic Tuning : Press the MANUAL/PRESET
• MP3 Enhancer : Helps enhance your sound
experience (ex. mp3 music). You can upscale your
MP3 level sound (24 kHz, 8bit) to CD level sound
(44.1 kHz, 16bit).
button to select Manual and then press and hold
the TUNING/CH (
) button to automatically
,.
search the band.
• Power Bass : Increases the volume level of bass
Setting Mono/Stereo
tones and provides thudding sound effects.
Press the MO/ST button.
• Football : Creates a more dynamic, realistic,
stadium like sound. For listening to football, soccer,
and other sporting events.
• Each time you press the button, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
• Virtual 7.1 : Creates a virtual 7.1 CH sound using
interference-free broadcast.
the 5.1 CH speaker system.
• Off : Select for normal listening.
Presetting Stations
K
Dolby Pro Logic II
Example : Presetting FM 89.10 into memory.
Movie Music Game Matrix Pro Logic Off
1.
Press the FUNCTION button to select FM.
• Movie : Adds realism to a movie soundtrack.
2.
Press the TUNING/CH (
) button to select
,.
• Music : When listening to music, you can
experience sound effects as if you are listening to
the actual performance.
<89.10>.
3.
4.
Press the TUNER MEMORY button.
• NUMBER flashes on the display.
Press the TUNER MEMORY button again.
• Game : Enhances the excitement of the game’s
sound.
• Press the TUNER MEMORY button before
• Matrix : Select to hear multi channel surround
• Pro Logic : Select to listen to a 2CH sound source
NUMBER disappears from the display on its own.
sound.
• After you press the TUNER MEMORY button,
NUMBER disappears from the display and the
station is stored in memory.
in 5.1CH surround sound with all speakers active.
-
A specific speaker(s) may not output depending
on the input signal.
5.
To preset another station, repeat steps 2 to 4.
• To tune to a preset station, press the MANUAL/
• Off : Select for normal listening.
PRESET button to select Preset and then press
the TUNING/CH (
) button to select the
,.
preset station.
|
English
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
K
K
SFE Mode
Use TV SOUND:
Symphony Hall in Boston (Hall 1) Philharmonic
Hall in Bratislava (Hall 2) Jazz Club in Seoul B
Church in Seoul Amphitheater (Rock) Off
1) When you want to listen to the TV's audio
through the home theater speakers.
2) When you want to listen to the audio from a USB
device plugged into the TV through the home
theater speakers.
• Symphony Hall in Boston (Hall 1) : Provides a
clear vocal as if listening in a concert hall.
• Philharmonic Hall in Bratislava (Hall 2) : Also
provides a clear vocal as if listening in a concert hall
but, less powerful than HALL1.
K
TV SOUND ON/OFF support specification
Anynet+
(HDMI-CEC)
Setting
TV
TV
OFF
O
• Jazz Club in Seoul B : Recommended setting for
Connected TV
Sound Sound
Jazz.
ON
O
• Church in Seoul : Gives the feel of being in a grand
church.
Anynet+
ON
• Amphitheater (Rock) : Recommended setting for
(HDMI-CEC)
supported TV
Rock.
OFF
O
X
• Off : Select for normal listening.
Anynet+
(HDMI-CEC) not
supported TV
No operation
O
X
3D Sound
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off High Low
| NOTES |
3D Sound is not available in FM mode.
\
TV SOUND
TV Sound
If you have a TV that supports Anynet+ (HDMI-CEC),
the TV SOUND button lets you direct the TV's audio
to the Home Theater Speakers or the TV Speakers. To
use, follow these steps:
1.
2.
3.
Connect an HDMI cable to the TV and home
theater. (See page 17.)
Set Anynet+ (HDMI-CEC) On in the home
theater and TV.
Press the TV SOUND button on the remote
control. TV SOUND ON flashes on the display
on the front panel, and then changes to D. IN.
• When TV SOUND is on, TV audio outputs
through the Home Theater speakers.
4.
Press the TV SOUND button again to turn TV
SOUND off.
• When TV SOUND is off, TV audio outputs
through the speakers of the connected
Anynet+ TV.
|
40
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
If you press the RED (A) button after you have logged
in, the My Account pop-up appears. On the pop-up,
you can select Logout, Change Account Information,
Link Service Accounts, Remove Accounts from the
Device, and Deactivate Account.
You can enjoy various network services such as streaming
video or on-line apps by connecting the product to your
network.
\
\
To use network services, you must first:
To rent movies and purchase for pay apps,you must
have a credit card registered in your account. If you
haven’t registered a card, select Change Account
Information. On the Change Account information
1.
2.
Connect the product to the network.
(See page 18)
Configure the network settings.
(See pages 24~26)
page, select Register Card, press the
button,
E
and then follow the directions on the screen.
Logging In to Your Samsung
Account
Before Using Movies & TV Shows
or Apps
Before you access Movies & TV Shows or Apps, we
suggest you log in to your Samsung account.
If you haven’t set up Smart Hub, when you use Movies
& TV Show or Apps for the first time, the product will ask
you to perform the Smart Hub set up procedure.
To log in to your Samsung account, follow these steps:
1.
2.
3.
With the Home screen displayed, press the RED (A)
1.
On the Home screen, select either Movies & TV
button. The Log In screen appears.
Shows or Apps, and then press the
button. If
E
Select the Email field, and then press the
E
you have selected Apps, go to Step 4.
button. The keyboard pop-up appears.
2.
If you selected Movies & TV Shows, the Smart Hub
Using the keyboard, enter your e-mail address.
pop-up appears asking if you want to set up Smart
When finished, select the Done button, and then
Hub. Select Yes, and then press the
button.
E
press the
button. The Log In screen re-appears.
E
The Welcome screen appears.
4.
5.
Select the Password field, and then press the
E
3.
4.
Select Start, and then press the
button. The
E
button. The keyboard pop-up appears.
Smart Hub Terms & Conditions, Privacy Policy
screen appears.
Using the keyboard, enter your password. When
finished, select the Done button, and then press the
On the Smart Hub Terms & Conditions, Privacy
Policy screen, you must review and agree to both
the Smart Hub Terms and Conditions and the
Privacy Policy to use Smart Hub.
button. The Log In screen re-appears.
E
6.
7.
To make the log in process easier next time, select
Sign me in automatically, and then press the
E
button.
5.
6.
Scroll down, and then click the View Details buttons
to review the full documents.
Select Log In, and then press the
button. The
E
product logs you in to your account. Your account
When done reading, scroll up to the first entry field,
e-mail is displayed on the bottom left of the screen.
and press the
button to agree to the Terms and
E
Conditions and consent to the Privacy Policy.
| NOTES |
7.
8.
9.
Press the ► button twice to go to the Supplemental
If you selected Sign me in automatically, the next
\
Privacy Notices screen.
time you log in, the product will automatically enter
your e-mail and password. All you need to do is select
Log In.
Click the View Details button to view the entire
notice.
If your e-mail address and password are not displayed
when the Log In screen appears, select the button
with the down pointing arrow head next to the Email
\
When done reading, scroll up to the top entry field,
and then press the
button.
E
| NOTES |
field, and then press the
button. A drop down list
E
You do not need to consent to the Supplemental
Privacy Notice, but one or more Smart TV features or
functionalities may not be available if you do not.
of all your registered accounts will appear. Select your
account, and then press the button. The product
\
E
will fill in the e-mail and password fields.
10. Press the ► button twice. The Setup Complete
screen appears. Press the
button.
E
|
English
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
If you don't have a credit card associated with your
Samsung account, after you log in, the Register
Card screen will appear. Follow the directions on the
screen. You must have a credit card registered to your
account to rent movies and to purchase for-pay apps.
\
Using Movies & TV Shows
You can download or stream for pay and free-of-charge
movies and TV shows and view them on your TV.
Movies & TV Shows
Featured
Recommended
Using Apps
You can download the applications from the Internet, and
access various for pay or free-of-charge application and
view them on your TV. To access some applications, you
need to have a Samsung account.
The Apps Screen at a Glance
Favorites
TV Shows
Movies
Purchased
Recommended
1.
2.
On the Home screen, select Movies & TV Shows,
1
2
3
2
3
4
5
Samsung
1
TV
and then press the
button.
E
My Apps
Select one of the Featured or Recommended
Web Browser
Apps
Apps
movies, and then press the
for that movie appears.
button. The page
E
OR
Use the ▼ button to go to the bottom of the screen.
Downloaded
Select Favorites, Featured, TV Shows, Movies, or
4
Purchased, and then press the
button.
E
On the page that appears, use the ▲▼◄► buttons
to select a show or movie, and then press the
E
Recommended : Displays recommended
button.
contents managed by Samsung.
1
Gives you access to various for pay or free-of-
On the TV Shows or Movies screen, you can also
select What’s New, Most Popular, or Genres to
see more available shows or movies. On the Genre
screen, use the ▲▼◄► buttons to select a Genre,
charge applications you can download.
Featured Applications : Use the ▲▼◄►
buttons to highlight the displayed Feature
and then press the
button.
E
Application, and then press the
button.
2
E
To make a selection on a page displaying TV shows
or movies, use the ▲▼◄► buttons to make a
Information about the featured application
appears.
selection, and then press the
button.
E
My Apps : Displays your personal gallery of
applications modifiable on the All Downloaded
screen.
3.
4.
To watch a selection, select Watch now, and then
3
4
press the
button. A selection screen appears
E
listing various locations from which you can rent the
film along with prices.
Downloaded : Select Downloaded to access
the All Downloaded screen where you can add
to, modify, and delete applications and see all
downloaded applications.
Select a location, and then press the
button.
E
Follow the directions on the screen to start the
movie.
| NOTES |
If you haven't logged into your Samsung account,
\
the Log in screen will appear after Step 3 and you will
need to log in.
|
42
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Downloading Applications
Starting an Application
You can download for pay or free-of-charge applications
through Samsung Apps.
1.
2.
Select Apps on the Home screen, and then press
the
button.
E
1.
On the Apps screen, select Samsung Apps, and
On the Apps screen, use the ▲▼◄►buttons to
then press the
button. The Samsung Apps
E
select an app, and then press the
app starts.
button. The
E
screen appears.
2.
Across the top of the screen, under What’s
New, you'll see a series of new apps. Use the
◄► buttons to scroll the list right or left, and
Using the All Downloaded Screen
then select an app. Press the
button to see
E
more information about the app. If the app is free,
All Downloaded
View : Date Downloaded
Edit
select Download, and then press the
button
E
to download the app. If it is a for-pay app select
1
/23
Buy, press the
button, and then follow the
E
Web Browser
Samsung Apps
instructions on the screen.
| NOTES |
To buy an app, you must be logged into your
\
Samsung account and have a credit card registered to
the account. Press the RED (A) button on your remote
to log in.
Web Browser
Category
:
XXXXX
|
Version
:
X.XXX
|
Size
:
XX.XKB
Contact Info
:
[email protected] (If you need to contact us, please use this address.)
If you haven’t registered a card, after you log in, press
the RED (A) button again, and then select Change
Account Information in the pop-up that appears. On
the Change Account information page, select Register
\
The All Downloaded Screen lists all the apps you have
downloaded and lets you:
• Sort the apps on the All Downloaded screen by Date
Card, press the
button, and then follow the
Downloaded, Recently Opened, and Title.
E
directions on the screen.
• Apply a number of Edit Menu functions to the apps
listed in the My Apps section of the Apps screen
including updating apps, moving apps into a folder,
deleting the apps from My Apps, and locking the apps.
You can also access and download apps from
the categories listed on the left of the screen. For
instructions, see Step 4.
\
3.
After the app has downloaded, select Run, and
• Start apps.
then press the
button to run the app now.
E
To run the app later, press the RETURN button. In
either case, the icon for the app will appear on the
Apps screen.
Sorting the Apps
To sort the apps on the All Download screen, follow these
steps:
4.
5.
To see additional apps, use the ▲▼◄► buttons
to move to the category list on the left side of the
screen.
1.
2.
On the Home screen, select Apps, and then press
the
button.
E
On the Apps screen, use the ▼ button to move to
the Downloaded hotspot at the bottom of the page,
Use the ▲▼ buttons to select a category. Each
time you move the highlight to another category, a
different set of applications appears on the right.
and then press the
button.
E
3.
4.
On the All Downloaded screen, use the ▲► buttons
6.
7.
8.
Use the ► button to move to the applications and
to move to View at the top of the screen, and then
the ▲▼◄► buttons to move from app to app.
press the
button.
E
To see more information about an app, select it, and
In the drop down that appears, select Date
then press the
button.
E
Downloaded, Recently Opened, or Title, and
To download the app, follow the directions in Steps
then press the
button. The apps on the All
E
2 and 3.
Downloaded screen are sorted by the criteria you
have chosen.
|
English
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Delete an App from My Apps
Using the Edit Menu Functions
Lock / Unlock
1.
On the All Downloaded screen, use the ▲► buttons
to go to Edit at the top of the screen, and then
press the
button.
E
Using the Lock / Unlock function and the Security PIN,
you can lock applications so they cannot be started on
either the Apps screen or the All Downloaded screen. The
default PIN is 0000.
2.
3.
Select Edit My Apps, and then press the
E
button. The Edit My Apps screen appears.
Select the app you want to delete from My Apps,
press the
button, and then press the ▲▼◄►
E
1.
On the All Downloaded screen, use the ▲► buttons
buttons in the direction of the
.
to go to Edit at the top of the screen, and then
The Remove from My Apps pop-up appears.
press the
button.
E
4.
5.
Select Yes, and then press the
button.
E
2.
3.
4.
Select Lock / Unlock, and then press the
E
button.
When you return to the Apps screen, the app will
have been removed from the My Apps area.
When the Lock Service appears, enter the PIN
using the number buttons on your remote control.
Move an App in My Apps
To lock an application, select the application, and
1.
On the All Downloaded screen, use the ▲► buttons
then press the
button. A lock appears on the
E
to go to Edit at the top of the screen, and then
app. Repeat to lock other, individual apps.
press the
button.
E
5.
6.
To unlock a locked app, select the application, and
2.
3.
Select Edit My Apps, and then press the
then press the
button.
E
E
button. The Edit My Apps screen appears.
To lock all the apps at once, use the ▲► buttons to
Select the app you want to move in My Apps, press
select the Lock All button, and then press the
E
the
button, and then press the ▲▼◄► buttons
button.
E
to move the app icon in the direction of one of the
arrows (<, >, ^, etc.) that appears around the app
icon. The app icon moves in the direction you have
chosen.
7.
8.
To unlock all the locked apps at once, use the ▲►
buttons to select the Unlock All button and then
press the
button.
E
Press the RETURN button twice to return to the
Apps screen. Locked apps will display a lock on the
upper right side.
4.
5.
After you have placed the app icon where you want,
press the
button.
E
When you return to the Apps screen, the app will be
Edit My Apps
positioned in the location you had selected.
Edit My Apps lets you add apps to and delete apps from
My Apps. It also lets you change the position of an app in
My Apps.
Create Folder
Create Folder lets you create a folder on the Downloaded
screen into which you can put apps.
Add an App to My Apps
1.
2.
On the All Downloaded screen, use the ▲► buttons
to go to Edit at the top of the screen, and then
1.
On the All Downloaded screen, use the ▲► buttons
press the
button.
E
to go to Edit at the top of the screen, and then
press the
button.
E
Select Create Folder, and then press the
E
button. The Set Folder Name pop-up appears.
2.
3.
Select Edit My Apps, and then press the
E
button. The Edit My Apps screen appears.
3.
4.
Press the
button. The keyboard appears.
E
Select a full color app from the top row of apps, and
Select the Clear button on the right side, and then
then press the
button. The full color app icon
E
press the
button to remove Folder 1 from the
E
appears in the My Apps area below and the app
entry field. Then, using the keyboard, enter the
icon in the top row is grayed out.
name you want to apply to the folder.
5.
6.
When finished, select the Done button on the right
| NOTES |
side, and then press the
reappears.
button. The pop-up
E
Grayed out apps are already in My Apps.
\
4.
When you return to the Apps screen, the app will
appear in the My Apps area.
Select OK, and then press the
button. The new
E
folder appears in the list of apps on the left side of
the screen.
|
44
English
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
7.
Select OK, and then press the
button. The
E
Move to Folder
folder is renamed.
Move to Folder lets you move apps to the folder of your
Select Close on the right side of the screen, and
choice.
then press the
button.
E
1.
On the All Downloaded screen, use the ▲► buttons
to go to Edit at the top of the screen, and then
Delete
press the
button.
E
Delete lets you delete apps and folders from the My
Apps screen. If there are apps in a folder, both the folder
and the apps are deleted together. Delete removes apps
permanently. If you decide you want to use an app you
deleted, you will need to download it again.
2.
3.
Select Move to Folder, and then press the
E
button. The Move to Folder screen appears.
Use the ▲▼◄► buttons to move to an app, and
then press the
button to select the app. A
E
check appears in the upper left corner of the app.
1.
On the All Downloaded screen, use the ▲► buttons
4.
5.
To deselect an app, press the
button. The
E
to go to Edit at the top of the screen, and then
check disappears.
press the
button.
E
Repeat Step 3 to select additional apps.
2.
3.
Select Delete, and then press the
button. The
E
Delete screen appears.
| NOTES |
Use the ▲▼◄► buttons to move to an app, or
To select all the downloaded apps, select Select All
\
folder and then press the
button to select. A
E
at the top right of the screen, and then press the
E
check appears in the upper left corner of the app or
button. To deselect all the apps, select Deselect All
folder you selected.
at the top right of the screen, and then press the
E
4.
5.
To deselect an app, press the
check disappears.
button. The
E
button.
6.
7.
When done, select Select folder at the top of the
screen, and then press the
folder pop-up appears.
button. The Select
Repeat Step 3 to select additional apps or folders.
E
| NOTES |
In the Select folder pop-up, use the ▲▼ buttons
To select all the downloaded apps, select Select All
\
to select the folder you want to move the apps you
at the top right of the screen, and then press the
E
selected to, and then press the
button.
E
button. To deselect all the apps, select Deselect All
8.
9.
The Apps Moved pop up appears. Press the
E
at the top right of the screen, and then press the
E
button.
button.
To open the folder, use the ▲▼◄► buttons to
6.
7.
After you have made all your selections, select
highlight the folder, and then press the
button.
E
Delete at the top of the screen, and then press the
button. The deleting pop-up appears.
E
Rename Folder
Select Yes, and then press the
button. All the
E
apps you selected are deleted.
Rename Folder lets you rename an existing folder.
1.
2.
3.
On the All Downloaded screen, use the ▲► buttons
| NOTES |
to go to Edit at the top of the screen, and then
You cannot immediately delete a locked app or
folder. If you select a locked app or folder to delete,
when you perform Step 7, the Lock Service pop-up
appears. Enter the Security PIN into the pop-up, and
\
press the
button.
E
Select Rename Folder, and then press the
E
button. The Rename Folder screen appears, and a
folder is highlighted.
then press the
button. The lock will be released
E
and the app or folder will be deleted.
User the ▲▼◄► buttons to highlight a folder of
your choice, and then press the
button. The
E
Update Apps
Rename pop-up appears.
4.
5.
Press the
button. The keyboard appears.
Update Apps automatically searches the Internet for
updated versions of the apps you have downloaded and
updates them if it finds newer versions.
E
Enter the new name for the folder. When finished,
select Done on the right side, and then press
the
button. The Rename popup reappears
1.
On the All Downloaded screen, use the ▲► buttons
E
displaying the new name.
to go to Edit at the top of the screen, and then
press the
button.
E
2.
Select Update Apps, and then press the
E
button.
|
English
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Bluetooth transmissions can interfere with the Screen
Mirroring signal. Before using the Screen Mirroring
function, we strongly recommend that you turn off
the Bluetooth function on your smart phone or smart
device.
3.
4.
5.
The unit searches the Internet for newer versions of
your apps. If there are new apps, the Update Apps
pop-up appears.
\
To download the update for a particular app,
highlight the app, and then press the
button.
E
A check appears to the left of the app.
Using the Web Browser
To deselect the app, highlight it, and then press the
button.
E
You can access the Internet using the Web Browser
application.
| NOTES |
To select all the updates, select Select All on the
Select Web Browser on the Home screen, and then
\
press the
button.
right of the pop-up, and then press the
button. To
E
E
deselect all the updates, select Deselect All, and then
| NOTES |
press the
button.
E
When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV -
and BD Wise is on - the browser is maximized to fill
the screen and the TV's resolution is set to the optimal
resolution automatically.
\
6.
7.
After you have selected the updates you want to
download, select Update on the right side of the
pop-up, and then press the
button.
E
The unit downloads the updates you have chosen.
A download bar appears in each app icon as the
update for that app is downloaded. The download
is complete when the download bars disappear.
The Web Browser is not compatible with Java
applications.
\
\
\
If you attempt to download a file, and the file cannot
be saved, an error message will appear.
E-commerce (purchasing products online) is not
supported.
Screen Mirroring
The Screen Mirroring function lets you view the screen of
your smart phone or smart devices on the TV you have
connected to the home theater system.
ActiveX is not supported.
\
\
Access may be blocked to some websites or to web
browsers operated by certain businesses.
1.
With the Blu-ray's Home screen displayed, press
the BLUE (D) button on the remote. The Screen
Mirroring screen appears.
Link Browsing and Pointer Browsing
The Web Browser provides two types of browsing,
Pointer Browsing and Link Browsing. When you launch
the browser for the first time, Pointer Browsing is active.
If you are using a mouse to navigate in the Web Browser,
we recommend leaving Pointer Browsing active. If you
are using your remote to navigate in the Web Browser,
we recommend that you replace Pointer Browsing with
Link Browsing. Link Browsing moves a highlight from one
link to the next in the Web Browser and is much faster
than Pointer Browsing if you are using your remote.
2.
3.
Launch AllShare Cast or Miracast on your device.
On your device, find the name of the home theater
system in the list of available devices and then
select it.
4.
The TV displays a connecting message (for
example, Connecting to Android_92gb...) and then
displays the connected message.
5.
In a few moments, the screen of your device
appears on the TV screen.
To activate Link Browsing, follow these steps:
| NOTES |
1.
Use the ▲▼◄►buttons on your remote to move
the pointer to the Link Browser icon on the top right
of the screen. The Link Browser icon is the third
icon from the right.
When you are using the Screen Mirroring function,
\
video stuttering or audio dropouts may occur,
depending on your environment.
Before using the Screen Mirroring function, confirm
that your smart phone has a compatible function.
Depending on your smart phone, the Screen Mirroring
function may have a different name (AllShare Cast,
etc.).
The pointer will be in the correct position if the icon
turns blue and the words “Link Browsing” appear
on the screen.
\
2.
Press the
button. Link Browsing is activated
E
and will remain active whenever you bring up the
Web Browser.
|
46
English
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel at a Glance
Using the Keyboard Pop-up
The Control Panel, which runs across the top of the
screen, has a series of icons which start a number of
useful functions. The icons are described below, starting
with the icon on the far left of the screen.
When you click the
, the
or access a data or text entry field, and
then press the
button, the keyboard pop-up appears.
E
1
Caps
1
q
a
z
2
w
s
3
e
d
c
4
r
5
t
6
y
h
n
7
u
j
8
i
9
o
l
0
p
~
?
ꢀ
Clear
^
@
-
*
!
123#&
ENG
f
g
b
k
,
Done
Cancel
x
v
m
.
.com
4
To use the keyboard pop-up with your remote, follow
these steps:
1.
2.
3.
Use the ▲▼◄► buttons on your remote to move
the highlight to a letter or number of your choice.
•
•
•
: Moves to the previous page.
: Moves to the next web page.
Press the
button to enter the letter or number
E
into the entry field.
: Displays the Bookmarks and History
screen. You can bookmark the current page,
select an existing bookmark, and edit and
delete bookmarks. You can also view your
browsing history and select a page to revisit.
To access capital letters, move the highlight to the
Caps key on the top left, and then press the
E
button. Press the
button again with the Caps
E
key highlighted to access small letters again.
4.
5.
6.
7.
To access symbols and additional punctuation
•
•
: Moves to the Home screen of the Web
Browser.
marks, highlight the 123#& button on the left, and
then press the
button.
E
: Lets you enter a
To delete a character you entered, move the
page address manually using the keyboard
pop-up.
highlight to the button, and then press the
ꢃ
E
button.
•
•
•
: Reloads the current page so that it is
refreshed on the screen.
To delete all the characters you entered, move the
highlight to the Clear button, and then press the
1
: Adds the current page to your
bookmarks.
button.
E
When finished entering, move the highlight to the
: Lets you search for
information by entering words or characters
using the keyboard pop-up. See Using the
Keyboard Popup on this page.
Done button, and then press the
button.
E
| NOTES |
If you have a wireless keyboard connected to your
product, you can use the wireless keyboard to enter
letters, numbers, symbols, and punctuation. Note
that the wireless keyboard will work only when the
keyboard popup appears and can only be used to
enter letters, numbers, symbols, and punctuation.
\
•
: Lets you enlarge or shrink the
screen by various percentages.
•
•
: Turns on the PIP function.
: Lets you switch between Pointer
Browsing and Link Browsing.
•
: Lets you configure the Browser’s
settings. See Using the Setting Menu on
page 48.
•
: Closes the Web Browser.
|
English
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Options on the Keyboard Pop-Up
Provides an easy-to-read page by
enlarging the main text.
Reading
Tools
To access the keyboard pop-up options, highlight the
Reading Tools is not available for all
button on the bottom left of the keyboard, and then press
pages.
the
button.
E
Lets you restrict your children’s
access to inappropriate web pages
by allowing access only to the web
sites you have registered.
Select the language for the
keyboard. You can select English,
French, Russian, etc.
Language
Every time you access Approved
Sites, the PIN screen appears. The
first time you access Approved
Sites, enter the default PIN, 0000
using the number buttons on your
remote.
The keyboard will suggest
recommended words as you enter
text. You can turn this function On
or Off.
Recommended
Text
The keyboard will predict the next
letter as you enter letters. The
predictions appear in a ring around
the letter you have just entered.
You can select a predicted letter or
move to another letter. You can turn
this function On or Off.
You can change the PIN using the
Reset password for the Approved
Sites function. See below.
Predict Next
Letter
Approved Sites feature : Turns
the Approved Sites function on
or off.
Approved
Sites
Reset password for Approved
Sites : Change the Approved
Sites password.
Using the Setting Menu
The Setting menu contains functions that control how
the Browser operates and Browser security functions.
Add current site : Lets you add
the currently displayed web site
to the Approved Sites list.
To open the Setting menu, highlight the
icon in the
Control Panel, and then press the
button. To select
E
Manage Approved Sites : Lets
you key in URLs to add to the
Approved Sites List and delete
sites from the Approved Sites
list. If you turn Approved Sites
on and have not added any sites
to the Approved Sites list, you
will not be able to access any
Internet sites.
an option in the setting menu, highlight the option, and
then press the
button.
E
Enable Grabbing
Reading Tools
Approved Sites
Private browsing off
Web Browser Settings
Help
Close
Enable or disable the Privacy mode.
When the Privacy mode is enabled,
the browser does not retain the
URLs of sites you visit. If you want
to enable Privacy mode, select OK.
Private
Browsing
On/Off
If the Privacy mode is running, the
“Stop” icon appears in front of
the URL at the top of the screen.
To disable Privacy mode, select
it again when Privacy mode is
enabled.
Turns the Grabber function on and
off. When the Grabber function is
on, you can move a web page up
and down without dragging the
scroll bar.
Enable/
Disable
Grabbing
The Grabber function is only
available in Pointer Browsing.
|
48
English
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
6.
Select Register, and then press the
button.
E
Set as homepage : You can set
In the ID and Password screen, enter the ID you use
to log in to the service you selected using the pop-
up keyboard. When finished, select Done, and then
the Browser's home page.
Pop-up Block : Turns the Popup
Block on and off.
press the
button.
E
Page Block : You can determine
whether to block advertisements
and select the URLs for which
advertisements are blocked.
7.
8.
Repeat the same process for the password. When
finished select Done, and then press the
E
button.
General : You can delete
personal in information such as
website history and browsing
data (cookies, etc.), and reset
all web browser settings to their
factory defaults.
Select OK, and then press the
button.
E
BD-LIVE™
Web Browser
Setting
Once the product is connected to your network, you can
enjoy various movie-related service contents available on
BD-LIVE compliant discs.
Encoding : You can set the
Encoding setting for web pages
to Automatic or select the
encoding format manually from a
list.
1.
Attach a USB flash drive to the USB jack on the
front of the product, and then check its remaining
memory. The memory device must have at least
1GB of free space to accommodate the BD-LIVE
services.
Pointer : You can set the speed
of the cursor when the cursor
is set to Pointer and turn Smart
Cursor On and Off.
2.
Select Settings on the Home screen, and then
press the
button.
E
Browser Information : Displays
the version number and copyright
information for the Web Browser.
3.
4.
Select Network, and then press the
button.
E
Select BD-Live Settings, and then press the
E
button.
Provides basic information about
5.
6.
Select BD Data Management, and then press the
Help
the operation of the Web Browser.
button.
E
Select Select Device, and then press the
E
| NOTES |
button.
Depending on the web site, some of the Web Browser
Setting functions may not be activated. Functions that
are not activated are greyed out and cannot be used.
\
7.
8.
9.
Select USB device, and then press the
button.
E
Insert a Blu-ray Disc that supports BD-LIVE.
Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
Linking your Internet Service
Accounts to the Product
| NOTES |
The way you use BD-LIVE and the provided contents
\
The Link Service Accounts function lets you link your
product to your accounts with Internet services such as
Pandora so that the product can log you in to the service
automatically when you start the app for that service.
may differ, depending on the disc manufacturer.
To create a service account link, follow these steps:
1.
2.
3.
4.
On the Home screen, press the RED (A) button on
your remote to log in to your Samsung Account.
After you have logged in, press the RED (A) button
on your remote again.
Select Link Service Accounts in the My Account
pop-up, and then press the
button.
E
On the Link Service Accounts screen, select the
service you want to link to the product, and then
press the
button.
E
|
English
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Digital Output
Additional Information
• Be sure to select the correct Digital Output or you
will hear no sound or just loud noise.
Notes
• If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby Digital,
DTS), the audio signal outputs as PCM.
Connections
HDMI OUT
• Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
• Certain HDMI output resolutions may not work,
• Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
depending on your TV.
• You must have a HDMI connection to enjoy videos
with 3D technology.
• This Digital Output setup does not affect the analog
(L/R) audio or HDMI audio output to your TV.
It affects the optical and HDMI audio output when
your product is connected to an AV receiver.
• A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Color to Off in the menu.
• If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
Settings
3D Settings
• Digital Output can be activated when Speaker
• For some 3D discs, to stop a movie during 3D
Selection is set to TV Speaker.
playback, press the
button once. The movie
5
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
BD-Live Internet Connection
• The Internet connection may be restricted while you
playing a 3D movie, press the
button once. The
5
are using BD-LIVE contents.
Blu-ray menu appears. Press the
button again,
5
then select 3D Settings in the Blu-ray menu.
Anynet+ (HDMI-CEC)
• Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
• Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
TV Aspect Ratio
• This function is not available if the HDMI cable does
not support CEC.
• Depending on the disc type, some aspect ratios
• If your Samsung TV has an Anynet+ logo, then it
may not be available.
supports the Anynet+ function.
• If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen, the
picture might appear to be distorted.
BD Data Management
• If you select 16:9 Original, your TV may display 4:3
• In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
Pillarbox (black bars on sides of picture).
BD Wise (Samsung Products only)
• Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster read/
write speeds.
• When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
• If the product is connected to a device that does
not support BD Wise, you can not use the BD Wise
function.
• The Resume Play function may not work after you
format the storage device.
• The total memory available to BD Data Management
•
For proper operation of BD Wise, set the BD Wise
option in both the product and the TV to On.
may differ, depending on conditions.
Front Display
• You cannot change the brightness of the
button
and the VOL +, - button.
|
50
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Settings
Playing JPEG files
• When Speaker Selection is set to TV Speaker,
• You can’t enlarge the subtitle and PG graphic in the
audio is produced through the TV speakers.
full screen mode.
HDMI audio
Media Play
• When HDMI audio is output to the TV speakers, it is
Dolby Pro Logic II Mode
automatically down-mixed to 2 channels.
• Before selecting Dolby Pro Logic II mode, connect
your external device to the AUDIO INPUT jacks (L
and R) on the product. If you connect to only one
of the inputs (L or R), you cannot listen to surround
sound.
Audio Return Channel
• When Anynet+ (HDMI-CEC) is Off, the Audio Return
Channel function is not available.
• Using an HDMI cable not certified for ARC (Audio
Return Channel) may cause a compatibility problem.
Using the TOOLS button while playing pictures
• The ARC function is only available if an ARC-
• If the system is connected to a BD Wise compliant
TV that has set BD Wise to On, the Picture Settings
menu will not appear.
compliant TV is connected.
Playback
• The Background Music function will not work unless
the music file and the photo file are located on the
same storage media. Also, sound quality can be
impacted by the bitrate of the MP3 music file, the
size of the photos, and the encoding method.
Playing Video files
• Video files with high bitrates of 20Mbps or more
strain the product’s capabilities and may stop
playing during playback.
Selecting the Audio Language
• The ◄► indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio
Language function depend on the languages that
are encoded on the disc. This function or certain
languages may not be available.
• Some Blu-ray Discs may allow you to select either
the PCM or Dolby Digital audio English soundtrack.
Selecting the Subtitle Language
• Depending on the Blu-ray Disc / DVD, you may be
able to change the subtitle language in the Disc
Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and
secondary subtitles at the same time.
• The total number of primary and secondary subtitles
are displayed respectively.
|
English
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Digital Output Selection
Bitstream
(Re-encoded
Dolby D)
Bitstream
Bitstream
Setup
PCM
(Unprocessed)
(Re-encoded DTS)
Connection
HDMI supported AV receiver
Re-encoded
PCM
Up to PCM 7.1ch
Up to PCM 5.1ch
Up to PCM 7.1ch
Up to PCM 7.1ch
Up to PCM 7.1ch
PCM
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS re-encoded
Dolby Digital *
Re-encoded
Dolby Digital
DTS re-encoded
DTS re-encoded
DTS re-encoded
DTS re-encoded
Dolby Digital *
Dolby Digital
Re-encoded
Plus
Dolby Digital *
Dolby
Re-encoded
Audio
TrueHD
Dolby Digital *
Stream on
Blu-ray Disc
Re-encoded
DTS
Dolby Digital *
DTS-
HD High
Resolution
Audio
DTS-HD
Master
Audio
PCM
DTS-HD High
Re-encoded
Up to PCM 7.1ch
Up to PCM 7.1ch
DTS re-encoded
Resolution Audio
Dolby Digital *
DTS-HD Master
Audio
Re-encoded
DTS re-encoded
Dolby Digital *
PCM 2ch
Up to PCM 5.1ch
Up to PCM 7.1ch
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
Audio
Stream on Dolby Digital
DVD
DTS
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects, then
re-encodes the PCM
audio into Dolby
Digital bitstream or
PCM.
Outputs only the
Decodes the main
feature audio and
main feature audio
Decodes the main
feature audio and
BONUSVIEW audio
stream together
stream so that your BONUSVIEW audio
AV receiver can
decode the audio
bitstream.
stream together
into PCM audio and
adds Navigation
Definition for
Any
Blu-ray Disc
into PCM audio and
adds Navigation
Sound Effects.
You will not hear
BONUSVIEW audio
Sound Effects, then
re-encodes the
or Navigation Sound PCM audio into DTS
Effects.
bitstream.
If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.
Blu-ray Discs may include three audio streams :
-
-
-
Main Feature Audio : The audio soundtrack of the main feature.
BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may sound.
Navigation Sound Effects are different on each Blu-ray Disc.
|
52
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution according to the output mode
Blu-ray Disc/E-contents/Digital Contents playback
DVD playback
HDMI Mode
HDMI Mode
Output
E-contents/
Setup
Blu-ray Disc
Resolution of Blu-ray
Digital contents
BD Wise
1080p@60F
480i
Disc
Auto
Max. Resolution of TV input
Max. Resolution of TV input
1080p@60F
Movie Frame : Auto (24Fs)
1080p@60F
1080p@24F
1080i
720p
480p
1080p@60F
-
1080i
720p
480p
1080i
720p
480p
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed
below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung
Electronics at 1-800-SAMSUNG (1-800-726-7864).
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
•
•
The home theater does not play sound during fast playback, slow playback,and step
motion playback.
Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all 6.
• On certain Blu-ray/DVD discs, sound is output from the front speakers only.
• Check if the speakers are connected properly.
• Adjust the volume.
• When playing audio from a CD, the radio, or a TV, the unit outputs sound to the
front speakers only.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is
produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
|
English
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Symptom
Check/Remedy
The remote control does
• Are you operating the remote within its operational range and within the proper
not work.
angle relative to the sensor?
• Are the batteries drained?
• Have you selected the mode (TV/BD) functions of the remote control (TV or BD)
correctly?
• The disc is rotating but
• Is the TV power on?
no picture is produced.
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• Picture quality is poor
and the picture is
shaking.
• A poorly manufactured disc may not be playable.
Audio language and
• Audio language and subtitles will not work if the disc does not contain them.
• Are you using a disc that does not contain menus?
subtitles do not work.
The menu screen does
not appear even when the
menu function is selected.
The aspect ratio cannot be
• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer
to the Blu-ray Disc jacket and then select the appropriate function.
changed.
• The product is not
working.
• Press and hold the remote control's
button for 5 seconds in STANDBY mode.
5
This will reset the unit.
(Example: The power
goes out or a strange
noise is heard.)
-
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
•
The Product is not working
normally.
You have forgotten the
rating level password.
• With no disc in the product, press and hold the product's
button for longer
5
than 5 seconds. INIT appears on the display and all settings will return to the
default values.
Then, press the POWER button.
-
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
Can't receive radio
broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio
through the Product, no
sound is heard.
• If you press the OPEN/CLOSE button while listening to TV audio using the D.
audio is muted.
^
IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV
"Not Available" appears on • The features or action cannot be completed at this time because:
screen.
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to • Press and hold the
button on front panel for more than 5 seconds with no disc
5
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
in the product. All settings will revert to the factory settings.
|
54
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check/Remedy
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
• If random noise appears on the screen, it means that TV does not support HDCP
screen.
(High-bandwidth Digital Content Protection).
AllShare function
I can see folders shared
through AllShare, but I
cannot see the files.
• AllShare only shows Video, Photo, and Music files. Other types of files are not
displayed.
Video is played
• Check if the network is stable.
intermittently.
• Check if the network cable is properly connected and if the network is not
overloaded.
• The wireless connection between the DLNA compatible device and the product is
unstable.
Check the connection.
The AllShare connection
between the product and
PC is unstable.
•
•
IP address under the same subnetwork should be unique, otherwise IP collision can
results in such a phenomenon.
Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
I cannot connect to the
• Test whether the network connection is active by using the Network Status
function.
BD-LIVE server.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 50)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
•
The USB memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 50)
| NOTES |
When the factory default settings are restored, all stored user BD data is deleted.
\
Repairs
If you contact us to repair your product, an administration fee may be charged if either:
1.
An engineer is called out to your home at your request and there is no defect in the product.
You bring the unit to a repair center and there is no defect in the product.
2.
We will provide you with the amount of the administration fee before we make a home visit or begin any work on your
product.
com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your product.
|
English
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Power Requirements
AC 110-120V, ~50/60Hz
Power Consumption
Weight
72.5 W
5.07 Ibs
General
Dimensions
16.93 (W) x 2.17 (H) x 9.92 (D) inches
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
+41°F to +95°F
10 % to 75 %
55 dB
FM Tuner Usable sensitivity
12 dB
Total harmonic distortion
0.5 %
Video
1080p, 1080i, 720p, 480p
HDMI
Audio
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
Center speaker output
Surround speaker output
Subwoofer speaker output
165W x 2 (3)
170W (3)
165W x 2 (3)
170W (3)
Amplifier
Analog input : 20Hz~20kHz ( 3dB)
Digital input : 20Hz~40kHz ( 4dB)
70dB
Frequency response
S/N Ratio
Channel separation
Input sensitivity
60dB
(AUX) 500mV
Speaker (5.1ch speaker system)
Speaker
system
Dimensions
Output sound Rated Maximum
Weights
(Ibs)
1.59
1.34
1.94
8.09
Impedance
3
Frequency range
pressure level input
input
(W x H x D) (inches)
Front
Surround
Center
3.5 x 8.2 x 2.7
3.5 x 5.6 x 2.7
14.2 x 2.9x 2.7
6.6 x 13.8 x 11.2
165W
330W
140Hz~ 20kHz
40Hz ~ 160Hz
87dB/W/M
170W
340W
Subwoofer
88dB/W/M
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
• Design and specifications are subject to change without prior notice.
• Dispose of unwanted electronics through an approved recycler.
K
SWA-6000
Operating Humidity Range 10% ~ 75%
Power Requirements
AC 120V ~60Hz
50 W
Output
165W x 2 CH
20Hz~20KHz
65dB
Power Consumption
Weight
Frequency range
S/N Ratio
2.52 lbs
Dimensions (W x H x D)
3 x 9 x 6 inches
Operating Temperature
+41°F to +95°F
Range
|
56
English
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original
consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the
product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set
forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS
IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the
extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following,
including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this
product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect,
fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories,
applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this
product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure
to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the
instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY
TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park,
NJ 07660-2112
1-800-SAMSUNG
IN THE US
(726-7864)
AH68-02575A-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|