High Resolution 12X Vandal Dome Camera SVD-4700 User Guide
Before installing and operating this product,
please read this manual thoroughly.
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before operating the camera, confirm the camera model and correct input
power voltage. In order to that you can understand this manual thoroughly,
we will introduce our model description.
n SVD-4700 SERIES
• NTSC MODEL
SVD-4700N
• PAL MODEL
SVD-4700P
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
n MODEL DESCRIPTION
• SVD-4700X
_
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
SIGNAL SYSTEM
• SIGNAL SYSTEM
N → NTSC MODEL
P → PAL MODEL
INFORMATION-This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆ Do NOT use power sources other than that specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Features
• Features ……………………………………………………………… 5
• Warnings & Cautions………………………………………………… 6
• Precautions…………………………………………………………… 7
• Components and Accessories ……………………………………… 8
• Overview …………………………………………………………… 9
SSDR
A/F 12X Optical Zoom
(Samsung Super Dynamic Range)
For images with high contrast between bright
and dark areas from difficult lighting
conditions such as backlighting, this camera
selectively illuminates darker areas while
retaining the same light level for brighter areas
to even out the overall brightness.
The built-in SVD-4700 optical zoom lens is a
highly durable component. It features auto
focus, auto iris, and zoom functions.
Miscellaneous Functions
• Installation……………………………………………………………10
n Installation… ………………………………………………………………… …10…
HLC(High Light Compensation), SENS-UP,
FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION
DETECTION and PRIVACY functions are
provided.
DAY&NIGHT(ICR)
…
…… …10
n Adjust the panning, tilting and rotate mechanism while checking the position on the monitor
This camera has a function that automatically
selects the mode that is appropriate for daytime
or night-time conditions.
The COLOR mode operates in daytime conditions
to provide optimum colors, and BW mode
operates in night-time conditions to enhance the
definition of the image.
• Connection …………………………………………………………… 12
n Connecting To Monitor… …………………………………………………… …12…
High Resolution
…
…
…
n Connecting To Power………………………………………………………… …13…
n RS-485 communication control……………………………………………… …14…
n Using Coaxial Communications……………………………………………… …15
By adopting a diagonal 6mm(1/3") 410,000 (NTSC)
pixel, 470,000(PAL) pixel SONY CCD, the camera
produces clear picture quality with a horizontal
resolution of 580 TV line in color and a horizontal
resolution of 680 TV line in BW mode.
• Operating Your Camera ……………………………………………16
n Menu Configuration… ……………………………………………………… …16…
Communication
RS-485, Coaxial communication methods are
supported.
- RS-485 Communications
…
…
…
…
…
…
…
…
…
…
n Menu Setup…………………………………………………………………… …17…
SSNR 3
(Samsung Super Noise Reduction)
…
…
…
…
…
…
…
…
…
· SSDR (Samsung Super Dynamic Range)… ……………………………… …18…
· White Balance (White Bal)… …………………………………………………19…
· BACKLIGHT… ……………………………………………………………… …20…
· Motion Detection…………………………………………………………… 22…
· FOCUS… …………………………………………………………………… 24…
· EXPOSURE…………………………………………………………………… 29…
· SPECIAL……………………………………………………………………… 33…
· RESET… …………………………………………………………………… …41…
· EXIT… …………………………………………………………………………41
:
STW(SPD), Pelco-P, Pelco-D, Vicon,
Panasonic, Bosch, Honeywell, SEC, AD
The high-performance W-V DSP chip
effectively removes low-light gain noise and
ghosting to provide clear images even in dark
environments.
- Coaxial Communications
: Pelco Coaxitron
DIS (Digital Image Stabilizer)
OSD
The DIS function compensates for any camera
movement, to produce more stable pictures.
The camera’s OSD is complimented by 12
foreign languages.
- NTSC : Korean, English, French, Spanish,
Japanese, Portuguese
- PAL : English, French, German, Spanish,
Italian, Chinese, Russian, Czech, Polish,
Portuguese
• Troubleshooting………………………………………………………42
• Specifications…………………………………………………………43
• Dimension ……………………………………………………………45
IP66 Approved/Dust and Rain
Resistant
With dust and rain resistant design, the camera
can be installed outside under building eaves or
places that are exposed to the dust and rain.
COLOR DOME CAMERA
COLOR DOME CAMERA
User’s Manual
User’s MDanouawl nload from Www.Somanuals.com. All Manuals Search And Download.
4
5
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly products, and indicates
that the product satisfies the EU RoHS Directive.
Precautions
Do not install under extreme
temperature conditions.
Do not install in high humidity
environment.
Warnings & Cautions
This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.
* For product inquiries, please contact the retail shop where you bought the camera. The use of
equipment such as an aerial ladder while providing after-sales service shall be at your expense.
* Separate the power plug during a thunder storm.
* This product is only part of a surveillance system. Therefore, we can't compensate for material loss and/
or personal injuries by robbery, fire, natural disaster or something like this type.
Use only under temperature conditions between
-10°C and +50°C. Provide good ventilation
when using in high temperature conditions.
May lower image quality.
Do not install under unstable
lighting conditions.
Avoid touching the camera lens.
Warning/Attention/Special Mark Messages
Ignoring this information may
Ignoring this information may
result in material loss and/or
result in material loss and/or a
serious personal injuries including
slight injuries.
death.
Severe lighting changes or flickering may
hinder normal camera operation.
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
Indicates “Never Allowed.”
Indicates “No Disassembling.”
Do not drop the camera or
subject it to physical shock.
Never keep the camera face to
strong light directly.
May cause a product malfunction.
May damage the CCD.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
6
7
Precautions
Overview
Do not expose the camera to
radioactivity.
⓫…
⓬…
1… 2…
3…
Radioactivity exposure may damage the
CCD.
Notes
ꢀ•ꢀꢀExposureꢀtoꢀaꢀspotlightꢀorꢀanꢀobjectꢀemittingꢀstrongꢀlightꢀmayꢀcauseꢀsmearꢀorꢀ
blooming.
5…
4…
•ꢀꢀEnsureꢀthatꢀtheꢀpowerꢀsourceꢀcompliesꢀwithꢀnormalꢀspecificationsꢀbeforeꢀsupplyingꢀitꢀ
toꢀtheꢀcamera.
6…
7…
8…
❾…
❿…
Components and Accessories
ꢀPan Base : Control panning angle of camera.
ꢁRotate Base : Control rotating angle of camera.
ꢂ12x Zoom Module
❶…
2
3
4
5
ꢃFront Cover
ꢄPan Base Holding Screws : Fix panned position.
ꢅRS-485 Control Terminal : The detailed decription refers to p14.
ꢆVideo Output Jack : Video signals are output through this port. Connect this port
to the Video IN port of a monitor.
6
7
8
ꢇPower Input Terminal : Connect the power as specified for each model here.
ꢈVideo Output terminal to Monitor : Used for monitoring of video output when
camera installation.
ꢉFuntion Setup Switch : Display the menu on the screen and move the cursor to
four directions to confirm status or after changing a selected item.
ꢊDome Cover
❶
5
2
6
3
4
8
SVD-4700
…
USER Manual……
…
Ø5 Tapping Screw 4EA……
Quick Install Guide…………
Installation Video Output Cable
7
Wrench
…
Template
…
DC12V/500mA Adaptor
※ The set for America does not include the power adapter.
ꢋInner Cover
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
8
9
Installation
ꢀ
ꢁ
You can adjust camera to any direction by using the Pan,Tilt, Rotate mechanism.
• Pan Base moves by 170° in each direction or 340° in total.
• Tilt Base covers 73° in each direction or 146° in total.
• The angle range of the Rotate Base is the same as that of the Pan Base.But one
direction range is 195° and another is 145°
Installation
Notes
•ꢀꢀTheꢀinstallationꢀshouldꢀbeꢀdoneꢀbyꢀqualifiedꢀserviceꢀpersonnelꢀorꢀsystemꢀinstallers.
•ꢀꢀIfꢀtheꢀceilingꢀmaterialꢀisꢀnotꢀstrongꢀenoughꢀtoꢀholdꢀtheꢀinstallationꢀscrews,ꢀtheꢀcameraꢀ
mayꢀfallꢀoff.ꢀReinforceꢀtheꢀceilingꢀasꢀneeded.
•ꢀꢀTakeꢀcareꢀnotꢀtoꢀdropꢀtheꢀproductꢀduringꢀinstallation.ꢀDoꢀnotꢀallowꢀanyoneꢀtoꢀstandꢀ
belowꢀtheꢀinstallationꢀarea.
Methods of adjustment
• Wall installation
ꢀ
…After mounting the camera to the wall, loosen the rotate base holding screws.
…Adjust to the correct panning angle.
…Then adjust the tilt angle by rotating the base.
…Once complete re-tighten the rotate base holding screws.
• Ceiling installation
After mounting the camera to the ceiling, loosen the rotate base holding screws.
…Adjust to the correct panning angle.
…Then adjust the tilt angle by rotating the base.
…Once complete re-tighten the rotate base holding screws.
ꢁ
ꢂ
ꢃ
1. Remove the dome cover and inner cover from the main body by loosening the three
dome cover screws.
Mounting Bracket
ꢀ
…
ꢁ
ꢂ
ꢃ
Main Body(Camera)
Notes
Inner Cover
Dome Cover
•ꢀW
henꢀadjustingꢀtheꢀrotatingꢀangle,ꢀloosenꢀrotateꢀbaseꢀholdingꢀscrewꢀasꢀfollowsꢀFigures.
Thenꢀtightenꢀitꢀagain.
•ꢀꢀWhenꢀadjustingꢀtheꢀtiltingꢀangle,ꢀgripꢀtheꢀtiltꢀbaseꢀandꢀadjustꢀtiltingꢀangle.
•ꢀꢀWhenꢀadjustingꢀtheꢀpanningꢀangle,ꢀloosenꢀpanꢀbaseꢀholdingꢀscrewsꢀasꢀshownꢀbelowꢀ
andꢀthenꢀre-tighten.
2. And then remove the main body from the mounting bracket by the four main body screws.
RotateꢀBaseꢀHoldingꢀScrew
Adjust the panning, tilting and rotate mechanism while checking the position on the monitor
73°
145°
195°
170°
Rotate Base
Tilt Base
PanꢀBaseꢀHoldingꢀScrew
RotateꢀBaseꢀHoldingꢀScrew
Pan Base
•ꢀꢀWhenꢀadjustingꢀtheꢀtiltꢀmechanismꢀholdꢀtheꢀTiltꢀbaseꢀandꢀNOTꢀtheꢀlens.
-170°
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
11
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
10
Connection
Connecting to Power
Connecting to Monitor
Please connect the video output terminal located on the back of the camera to the monitor.
The recommended adaptor specification for
SVD-4700 is DC 12V / 500mA / AC24V /
500mA.
WHITE (TRX-)
RED (TRX+)
Please check the standard power requirement
before connecting the power.
CCTV Camera
Monitor
When the resistance value of copper wire is at [20°C(68°F)]
• The connection method varies depending on the type of monitor and accessories. Please
refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and select
75Ω for the Intermediate device as shown in the picture below.
Copper wire size(AWG)
Resistance value(Ω/m)
Voltage drop(V/m)
#24(0.22㎟)
0.078
#22(0.33㎟)
0.050
#20(0.52㎟)
0.030
#18(0.83㎟)
0.018
0.028
0.018
0.011
0.006
• Therefore having an excessively long distance between the power adaptor and the
camera may affect the camera’s performance.
※ Standard voltage for camera operation : DC 12V±10%, AC 24V±10%
※ …There may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
End monitor
Intermediate
※ The set for America does not include the power adapter.
Notes
CCTV Camera
•ꢀꢀPleaseꢀuseꢀaꢀpowerꢀadapterꢀthatꢀmeetsꢀtheꢀrequiredꢀstandards.
•ꢀPleaseꢀconnectꢀtheꢀpowerꢀafterꢀinstallation.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
13
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
12
Connection
Using Coaxial Communications
RS-485 communication control
• Coaxial Communications System
• OSD Control method
Connecting to RS-485 Control Cable
CAMERA
SET
DVR
MENU / ENTER
UP KEY
CONTROLLER
OSD KEY
CONTROL CABLE
RED (TRX+)
SPEC
RS-485+
UP
JOYSTICK UP
WHITE (TRX-)
RS-485-
DOWN
LEFT
DOWN KEY
LEFT KEY
JOYSTICK DOWN
JOYSTICK LEFT
JOYSTICK RIGHT
RIGHT
RIGHT KEY
Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG
TECHWIN System Controller or DVR.
DVR
(1) Connection to a PC.
DVD
Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.
EX) SERIAL PORT OF THE PC(COM1) → SERIAL CABLE → RS-485 CONVERTER → RS-485
CONTROL CABLE
(2) Connection to a DVR or System Controller.
Connect the RS-485 cable to the connection ports of the DVR or System Controller.
: BNC
---- : RS-485
•
•
485 Control Board Connection Port
(+) CONNECTION TERMINAL
RS-485 Control Port
RED (TRX+)
– Video Cable
(-) CONNECTION TERMINAL
WHITE (TRX-)
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
* RS-485 Communication establishment initial value
Camera ID
1
BAUD RATE
9600
UART MODE
8-NONE-1
RET PKT
Item
ENABLE
Initial value
Distance Recommended Cable Specification
300m
450m
600m
3C2V(RG-59/U)
5C2V(RG-6/U)
7C2V(RG-11/U)
Notes
•ꢀꢀWhenꢀbuildingꢀaꢀcontrolꢀsystemꢀtoꢀcontrolꢀtheꢀcamera,ꢀpleaseꢀuseꢀtoꢀtheꢀSTW(SPD)PROTOCOLꢀ
orꢀPELCO-P,ꢀPELCO-D,ꢀVICON,ꢀAD,ꢀPANASONIC,ꢀBOSCH,ꢀHONEYWELL,ꢀSECꢀPROTOCOL.
•ꢀꢀWhenꢀyouꢀconnectingꢀtoꢀRS-485ꢀcontrolꢀcable,ꢀpleaseꢀpeelꢀoffꢀtheꢀouterꢀskinꢀinsideꢀtheꢀ
RS-485ꢀcontrolꢀcable.
•ꢀꢀInꢀcaseꢀofꢀSCC-101ꢀconnection,ꢀchangeꢀcommunicationꢀmodeꢀto『8-E-1』atꢀ
『Communicationꢀconfiguration』menu.ꢀ(Forꢀmoreꢀinformation,ꢀreferꢀtoꢀSCC-101ꢀmanual.)
Notes
ꢀ•ꢀꢀIfꢀtheꢀcameraꢀisꢀcontrolledꢀthroughꢀcoaxialꢀcommunication,ꢀpleaseꢀuseꢀaꢀvideoꢀampꢀ
intendedꢀforꢀcoaxialꢀcommunications.ꢀRegularꢀvideoꢀampsꢀdoꢀnotꢀtransferꢀcoaxialꢀ
signals.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
15
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
14
Operating Your Camera
Menu Configuration
Menu Setup
Use the Function Setup switch within the camera.
MAIN SETUP MENU
Function Setup switch
●
…
●
ON
SSDR
OFF
●
…
●
………………
●
AWC→SET
ATW
MANUAL
WHITE BAL
●
OUTDOOR
●
INDOOR
●
…
●
…
●
HLC
BACKLIGHT
OFF
BLC
●
…
●
ON
MOTION DET
OFF
1. Press the Function Setup switch.
●
…
●
…
●
ZOOM SPEED
MODE
ZOOM TRACK
• Main setup menu is displayed on the monitor screen.
●
…
●
…●
FOCUS
D-ZOOM
ZOOM POS INIT USER PRESET
●
…
●
RETURN
LENS INIT
MAIN SETUP
Selectꢀtheꢀfunctionꢀusingꢀ
theꢀFunctionꢀSetupꢀswitch.
Changeꢀtheꢀstatusꢀusingꢀtheꢀ
FunctionꢀSetupꢀswitch.
SSDR
OFF
ATW
OFF
OFF
●
…
●
…
●
SHUTTER
BRIGHTNESS
IRIS
●
AGC
…
●
SSNR
…
●
SENS-UP
EXPOSURE
SPECIAL
WHITE BAL
●
RETURN
BACKLIGHT
MOTION DET
FOCUS
●
PRIVACY
…
●
…
●
DIS
DAY/NIGHT
●
…
●
…
●
●
RETURN
SYNC
COMM ADJ
IMAGE ADJ
EXPOSURE
SPECIAL
RESET
●
MONITOR
…
●
DISPLAY
…
RESET
EXIT
EXIT
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4.To finish the setting, select ‘EXIT’ and press the Function Setup switch.
Notes
•ꢀ
theꢀiconꢀandꢀpressꢀtheꢀFunctionꢀSetupꢀswitch.
•ꢀꢀAnꢀitemꢀwithꢀtheꢀ-ꢀ-ꢀ-ꢀiconꢀisꢀunavailableꢀdueꢀtoꢀfunctionꢀsettings.
Aꢀ nꢀitemꢀwithꢀtheꢀ ꢀiconꢀalsoꢀhasꢀsubꢀmenus.ꢀToꢀselectꢀaꢀsubꢀmenu,ꢀselectꢀanꢀitemꢀwith
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
17
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
16
Operating Your Camera
SSDR (Samsung Super Dynamic Range)
White Balance (White Bal)
SSDR illuminates darker spots of an image while retaining the same light level for brighter
spots to even out the overall brightness of images with high contrast between bright and
dark spots.
Use the White Balance function to adjust the screen color.
1.When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup
switch so that the arrow indicates ‘White Bal’ .
2. Select a desired mode using the Function Setup switch.
MAIN SETUP
SSDR
OFF
ATW
MAIN SETUP
WHITE BAL
SSDR
OFF
ATW
OFF
WHITE BAL
BACKLIGHT
1.When the SETUP menu screen is displayed, select ‘SSDR’ by using the switch so that the
arrow indicates ‘SSDR’.
※ Select one of the following 5 modes, as appropriate for your purpose.
2. Use the switch to change the SSDR level according to the contrast between bright and dark areas.
ATW
: Select this when the color temperature is between 1,800˚K and 10,500˚K.
MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-
tune the White Balance and then press the Function Setup switch.
AWC →SET :To find the optimal luminance level for the current environment, point the
camera towards a sheet of white paper and press the Function Setup
switch. If the environment changes, readjust it.
OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.
(sodium light inclusion)
SSDR ON
SSDR OFF
INDOOR
: Select this when the color temperature is between 4,500˚K and 8,500˚K.
Notes
•ꢀꢀWhiteꢀBalanceꢀmayꢀnotꢀworkꢀproperlyꢀunderꢀtheꢀfollowingꢀconditions.ꢀInꢀthisꢀcaseꢀ
selectꢀtheꢀAWCꢀmode.
ꢀꢀꢀWhenꢀtheꢀcolorꢀtemperatureꢀofꢀtheꢀenvironmentꢀsurroundingꢀtheꢀsubjectꢀisꢀoutꢀofꢀtheꢀ
controlꢀrangeꢀ(e.g.ꢀclearꢀskyꢀorꢀsunset).
ꢁ
ꢀWhenꢀtheꢀambientꢀilluminationꢀofꢀtheꢀsubjectꢀisꢀdim.
ꢂ
Ifꢀtheꢀcameraꢀisꢀdirectedꢀtowardsꢀaꢀfluorescentꢀlightꢀorꢀisꢀinstalledꢀinꢀaꢀplaceꢀwhereꢀ
illuminationꢀchangesꢀdramatically,ꢀtheꢀWhiteꢀBalanceꢀoperationꢀmayꢀbecomeꢀunstable.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
19
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
18
Operating Your Camera
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.
BACKLIGHT
• Select ‘BLC’ to adjust the area to be
• HLC : Enable the user to change the level,
Unlike conventional cameras, the SVD-4700 is designed to deliver a distinctive subject and
background at the same time, even when the subject is backlight, by using the features of the
proprietary W-V DSP chip.
enhanced then adjust the level.
mask tone area.
1.When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup
switch so that the arrow indicates ‘BACKLIGHT’.
MAIN SETUP
SSDR
OFF
ATW
OFF
OFF
WHITE BAL
BACKLIGHT
MOTION DET
2. Select a desired mode using the Function Setup.
OFF : Not being used
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlight, the light
can mask out much of the on-screen detail.
- LEVEL :Adjust level of the HLC function.(LOW,MIDDLE,HIGH)
- MASK TONE : Change the brightness
- LIMIT : Enable to change the operating condition.
Notes
•ꢀꢀForꢀeffectiveꢀviewingꢀofꢀlicenseꢀplates,ꢀthereꢀisꢀaꢀminimumꢀrequiredꢀilluminationꢀandꢀ
theꢀshutterꢀspeedꢀneedsꢀtoꢀbeꢀfasterꢀthanꢀ1/200sec.
•ꢀꢀBecauseꢀthereꢀcanꢀbeꢀaꢀdifferenceꢀinꢀtheꢀeffectivenessꢀofꢀHLCꢀaccordingꢀtoꢀtheꢀ
amountꢀofꢀlightꢀareaꢀinꢀtheꢀscreen,ꢀoptimizeꢀtheꢀinstallationꢀangleꢀforꢀtheꢀbestꢀHLCꢀ
performance.
•ꢀꢀWhenꢀdark,ꢀtheꢀHLCꢀisꢀonlyꢀactivatedꢀwhenꢀaꢀbrightꢀlightꢀexceedingꢀaꢀspecificꢀsize.ꢀ(Inꢀ
NIGHTꢀONLYꢀmode.)
•ꢀꢀTheꢀHLCꢀisꢀnotꢀactivatedꢀinꢀdayꢀlightꢀorꢀwhenꢀbrightꢀlightꢀisꢀnotꢀpresentꢀatꢀnight.ꢀ(Inꢀ
NIGHTꢀONLYꢀmode.)
•ꢀꢀTheꢀHLCꢀisꢀnotꢀactivatedꢀwhenꢀtheꢀD-ZOOMꢀmodeꢀisꢀ'ON'ꢀorꢀDISꢀmodeꢀisꢀ'ON'.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
21
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
20
Operating Your Camera
- START ZOOM : By moving the left or right direction of the Function Setup Switch in the
‘START ZOOM’ item to select the zoom position from 1x to 12x to be
returned after the ‘SMART ZOOM’ action is over.
- TARGET ZOOM : By moving the left or right direction of the Function Setup Switch in the
‘TARGET ZOOM’ item to select the zoom position from 1x to 12x to be
used during MOTION DETECTION.
Motion Detection
This product has a feature that will detect movements of objects in 8 different areas on the
screen.The camera detects an object’s movement by sensing disparity of outline, brightness
levels and color.The camera sends a detection signal out via the MD output terminal and will
zoom into a pre-determined point.
- DWELL TIME : By moving the left or right direction of the Function Setup Switch in the
‘DWELL TIME’ item to select a time between 5 and 60 seconds for the dwell
time before the zoom is returned to the ‘START ZOOM’ position.
(5,7,10,15,20,30,40,60 sec)
MAIN SETUP
SSDR
OFF
ATW
OFF
OFF
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
Notes
Tips on Using the Motion Detection Feature
•ꢀꢀTheꢀfeatureꢀmayꢀnotꢀfunctionꢀproperlyꢀunderꢀflickeringꢀlightꢀconditions.
•ꢀꢀTheꢀcameraꢀinterpretsꢀsuddenꢀchangesꢀinꢀlightingꢀandꢀsubsequentꢀchangeꢀinꢀ
brightnessꢀofꢀanꢀobjectꢀasꢀmotion.
1. Please press the Function Setup Switch.
OFF : MOTION DETECTION mode is cancelled.
ON :Any motion in the selected areas is observed.
•ꢀꢀWithꢀtheꢀfeatureꢀenabled,ꢀotherꢀalgorithmsꢀmayꢀrequireꢀadditionalꢀtimeꢀtoꢀoperate.
• AREA SEL :You can select 8 different sensitivity MOTION
DET area.
MOTION DET SENSTIVITY
AREA1
MIN
AREA8
MAX
Notes
•ꢀꢀThisꢀsystemꢀdoesꢀnotꢀguaranteeꢀpreventionꢀofꢀfireꢀorꢀtheft.ꢀTheꢀmanufacturerꢀshallꢀnotꢀ
beꢀheldꢀresponsibleꢀforꢀanyꢀaccidentꢀorꢀdamageꢀincurred.
•ꢀꢀConnectꢀanꢀexternalꢀalarmꢀdeviceꢀtoꢀMDꢀOutꢀonꢀbackꢀofꢀtheꢀcamera.
• AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
• SEL POS(XPOS/YPOS) :You can control MD area size.
• SMART ZOOM : Smart zoom is operated in connection
with MOTION DETECTION. When the
SMART ZOOM function is ‘ON’ while the
MOTION DETECTION mode is ‘ON’, the
zoom goes to the TARGET ZOOM
position once motion is detected. Once
the zoom action is finished and ‘DWELL
TIME’ has passed, the zoom returns to
the ‘START ZOOM’ position.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
23
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
22
Operating Your Camera
- ONE PUSH : Focus is automatically adjusted just once, after
zoom position is changed. Select 'ONE PUSH'
and press the Function Setup Switch to
confirm. Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM) positions
by moving the directional key of Function
Setup Switch while verifying the changes on
screen. Press the Function Setup Switch once
the desired image quality is obtained.
FOCUS
ZOOM/FOCUS POS SETUP
MAIN SETUP
↑
↓
: TELE
: NEAR
: WIDE
SSDR
OFF
ATW
OFF
OFF
←
→
: FAR
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
- MANUAL : Select 'MANUAL' and press the Function Setup
Switch to confirm. Increase or decrease optical
zoom (ZOOM) or digital zoom (D-ZOOM)
positions moving directional key of Function
Setup Switch while verifying the changes on
screen. Press the Function Setup Switch until the
ce desired image quality is obtained. Focus can
be manually adjusted, independent of moving
zoom.
ZOOM/FOCUS POS SETUP
1. Press the Function Setup Switch to access the main setup menu and then position the
indicator over FOCUS moving the up or down direction of Function Setup Switch.
2. Press the Function Setup Switch.
↑
↓
: TELE
: NEAR
: WIDE
: FAR
←
→
MODE :You can select the most suitable zoom mode. Move the arrow indicator to
’MODE‘ by moving the up or down direction of the Function Setup Switch
FOCUS SETUP
MODE
AUTO
AUTO TRACK
FAST
ZOOM TRACK : Select ‘ON’ for the ‘SMART ZOOM’ item in the MOTION DETECTION menu
and press Function Setup Switch to change the settings for the ‘SMART
ZOOM’ function.
ZOOM TRACK
ZOOM SPEED
D-ZOOM
ZOOM POS INIT
USER PRESET
LENS INIT
RETURN
OFF
OFF
OFF
By moving the left or right direction of the Function Setup Switch in the ‘ZOOM’ item to select
‘AUTOTRACK’ or ‘TRACK’ and press Function Setup Switch to activate the zoom action focus
function.
MANUAL
- AUTO TRACK : Zooming in while deciding or adjusting the status of the focus.
- TRACK :The camera moves the focus track which is established.
- OFF : Only the zoom lens moves.
- AUTO : Select AUTO and press the Function Setup Switch to
confirm. Increase or decrease optical zoom (ZOOM)
or digital zoom (D-ZOOM) positions by moving the
up or down direction of the Function Setup Switch
while verifying the changes on screen. Enabling
D-ZOOM (ON) means that digital zoom will activate
once optical zoom ends. The focus automatically
adjusts when the lens zooms in and out.
ZOOM POS SETUP
FOCUS SETUP
↑
↓
MODE
ZOOM TRACK
ZOOM SPEED
AUTO
AUTO TRACK
FAST
: TELE
: WIDE
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
25
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
24
Operating Your Camera
ZOOM SPEED : Configure zoom tracing speed using this feature. Position the indicator
over 'ZOOM SPEED' by moving the up or down direction of the Function
Setup Switch and then set to desired mode by moving the left or right
direction of the Function Setup Switch
ZOOM POS INIT : Moves to the controlled ZOOM position when the power is truned on
and the initial ZOOM position has been set.
FOCUS SETUP
MODE
AUTO
AUTO TRACK
FAST
FOCUS SETUP
ZOOM TRACK
ZOOM SPEED
D-ZOOM
ZOOM POS INIT
USER PRESET
MODE
AUTO
AUTO TRACK
FAST
ZOOM TRACK
ZOOM SPEED
D-ZOOM
OFF
OFF
OFF
OFF
- FAST :To move zoom fast.
- SLOW :To move zoom slowly.
- MEDIUM :To move zoom at medium speed.
• AUTO : If you turn the power off and on, the zoom
magnification level is set to the previous level that
was set before the power went off.
INIT ZOOM POS SETUP
▶POS INIT
X1
RETURN
• MANUAL :The zoom magnification level can be set from 1x
D-ZOOM : Configure magnification limit from x2~x16 using this feature. Position the indicator
over 'D-ZOOM' by moving the up or down direction of the Function Setup Switch
Set 'D-ZOOM' to 'ON' and press the Function Setup Switch to confirm.
to 12X.
Notes
FOCUS SETUP
MODE
AUTO
AUTO TRACK
FAST
•ꢀꢀTheꢀzoomꢀpostionꢀisꢀsavedꢀafterꢀ5ꢀsecondsꢀwhenꢀyouꢀsetꢀzoomꢀfunction.
ZOOM TRACK
ZOOM SPEED
D-ZOOM
OFF
OFF
USER PRESET : Preset user-designated configurations using this feature. Position the indicator
over ‘USER PRESET’ by moving the up or down direction of the Function Setup
Switch and then set to ‘ON’ by moving the left or right direction of the
Function Setup Switch. Press the Function Setup Switch to confirm.
ZOOM POS INIT
- Set 'ZOOM LIMIT' to the desired level by moving the left or
right direction of the Function Setup Switch.
D-ZOOM LIMIT SETUP
▶LIMIT
X2
RETURN
FOCUS SETUP
MODE
AUTO
AUTO TRACK
FAST
ZOOM TRACK
ZOOM SPEED
D-ZOOM
OFF
Notes
ZOOM POS INIT
USER PRESET
LENS INIT
OFF
OFF
MANUAL
•ꢀꢀWhenꢀtheꢀDISꢀisꢀenabled,ꢀyouꢀcannotꢀuseꢀtheꢀD-ZOOM.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
27
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
26
Operating Your Camera
- PRESET NO : Up to 128 preset configuratons are supported.
- SAVE : Save configured preset.
EXPOSURE
ZOOM POS SETUP
- CLEAR : Clear configured preset.
- RETURN : Revert to the FOCUS SETUP menu.
MAIN SETUP
↑
↓
: TELE
: WIDE
SSDR
OFF
ATW
OFF
OFF
1X
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
LENS INIT : By moving the left or right direction of
USER PRESET
the Function Setup Switch in the ‘Lens
|||||||||||||||||||||||||
|
▶
PRESET NO
1
initialization’ item select ‘Automatic’ or
‘Manual’ and then press the SET button.
- AUTO :The lens can automatically be set by a pre-selected
day, from 1-day to 7-days. This will start from when
the time is set.
EXPOSURE
SPECIAL
SAVE
CLEAR
RETURN
PRESET NOT DEFINED
1. Press the Function Setup Switch to access the main setup menu and then position the
indicator over 'EXPOSURE' by moving the up or down direction of the Function Setup Switch.
2. Press the Function Setup Switch to confirm.
- Manual :The Lens will reset when you press the Function
Setup Switch.
BR IGHTNESS : Use this feature to adjust image brightness. Position the indicator over
'BRIGHTNESS' by moving the up or down direction of the Function Setup
Switch. Then increase or decrease brightness level by moving the up or
down direction of the Function Setup Switch while verifying the changes
on screen. Set END once desired level is obtained.
FOCUS SETUP
LENS INIT SETUP
MODE
AUTO
AUTO TRACK
FAST
DAY
RETURN
1
ZOOM TRACK
ZOOM SPEED
D-ZOOM
EXPOSURE SETUP
OFF
OFF
OFF
|||||||||||| |||||||||||||
|
BRIGHTNESS
IRIS
50
ZOOM POS INIT
USER PRESET
LENS INIT
RETURN
AUTO
MANUAL
IRIS : Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' by moving the up
or down direction of the Function Setup Switch and then select the desired iris
mode by moving the left or right direction of the Function Setup Switch.
EXPOSURE SETUP
|||||||||||| |||||||||||||
|
BRIGHTNESS
IRIS
SHUTTER
50
AUTO
---
- AUTO :The iris is automatically activated upon illumination.
- MANUAL : Man ual iris configuration. Set 'IRIS' to 'MANUAL' by moving the left or right
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
29
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
28
Operating Your Camera
direction of the Function Setup Switch and then press the Function Setup Switch.
Increase or decrease iris level by moving the left or right direction of the Function
Setup Switch while verifying the changes on screen.
Notes
•ꢀꢀImageꢀmayꢀbecomeꢀunstableꢀifꢀtheꢀcameraꢀisꢀsetꢀtoꢀ'ESC'ꢀmodeꢀandꢀfacesꢀaꢀstrongꢀ
fluorescentꢀlight.
•ꢀꢀUnderꢀ'ESC'ꢀmode,ꢀtheꢀbrightnessꢀcanꢀbeꢀadjustedꢀbyꢀmovingꢀtheꢀleftꢀorꢀrightꢀdirectionꢀ
ofꢀtheꢀFunctionꢀSetupꢀSwitch
IRIS AUTO SETUP
IRIS MANUAL SETUP
▶IRIS F-No
F1.6
|||||||||||||||||||| |||
|
938
|||||||||||||||||||||||||
▶
OPEN LIMIT
|||||||||||||||||||||||
|
|
CLOSE LIMIT
RETURN
1
IRIS MAN
RETURN
1023
AGC (Auto Gain Control) : For brighter images.
ꢀ Position the indicator over 'AGC' by moving the up or down direction of the Function
Setup Switch.
ꢁ Set 'AGC' to the desired mode by moving the left or right direction of the Function
Setup Switch.
SHUTTER : Control image brightness by adjusting shutter speed.
ꢀ Position the indicator over 'SHUTTER' by moving the up or down direction of the
Function Setup Switch. Then select the desired shutter mode (A.FLK, ESC, MANUAL)
by moving the up or down direction of the Function Setup Switch.
- HIGH :Wide range gain value adjustment
- MANUAL : Selecting gain value range. (5dB ~ 41dB)
- OFF : Disabled
- LOW : Narrow range gain value adjustment
- MEDIUM : MEDIUM range gain value adjustment
EXPOSURE SETUP
|||||||||||| |||||||||||||
|
BRIGHTNESS
IRIS
50
EXPOSURE SETUP
AUTO
GAIN MANUAL SETUP
|||||||||||| |||||||||||||
|
SHUTTER
AGC
---
HIGH
BRIGHTNESS
IRIS
50
▶AGC VAL
RETURN
5dB
AUTO
SHUTTER
AGC
SSNR3
---
HIGH
ON
- MANUAL : Manual shutter speed setting.
- A.FLK (NTSC: 1/100, PAL: 1/120) : Flicker-free mode.
- ESC :Automatic shutter speed setting (optimal).
Auto operation is possible only when the IRIS is set to MANUAL.
SSNR(Samsung Super Noise Reduction) : On screen noise reduction.
ꢀ Position the indicator over 'SSNR3' by moving the up or down direction of the
Function Setup Switch.
ꢁ If you choose ’MANUAL‘, select the optimal shutter
speed.
SHUTTER MANUAL SETUP
▶SHUTTER VAL
1/50
- In MANUAL mode, the optimal shutter speed needs
to be designated. Select from 1/60 to 1/120,000
(NTSC) or from 1/50 to 1/120,000 (PAL). * 'Sens-Up'
mode can be configured manually (2x to 512x).
- Verify changes made to the shutter speed by
referencing to changes the 'on-screen' brightness.
ꢂ Press the Function Setup Switch to complete.
RETURN
ꢁ Set 'SSNR3' to the desired mode by moving the left or
SSNR
right direction of the Function Setup Switch.
- OFF : Disabled
||||||||||||||||||||||||
|
▶LEVEL
RETURN
12
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
31
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
30
Operating Your Camera
Notes
SPECIAL
•ꢀꢀChangingꢀtheꢀ'AGC'ꢀsettingꢀfromꢀLOWꢀtoꢀHIGHꢀresultsꢀinꢀgreaterꢀsensitivity,ꢀasꢀwellꢀasꢀ
onꢀscreenꢀnoise.
MAIN SETUP
•ꢀꢀSettingꢀ'AGC'ꢀtoꢀOFFꢀlocksꢀ'SSNR3'ꢀconfiguration.
SSDR
OFF
ATW
OFF
OFF
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
SENS-UP :This feature ensures clear images at night or under low light conditions.
ꢀ Position the indicator over 'SENS-UP' by moving the up
or down direction of the Function Setup Switch.
ꢁ Set 'SENS-UP' to the desired mode by moving the left
or right direction of the Function Setup Switch.
- AUTO : Select this mode for use in night time or under
low light conditions.
SENS-UP LIMIT SETUP
EXPOSURE
SPECIAL
RESET
▶LIMIT
RETURN
X2
1. Press the Function Setup Switch to access the main setup menu and then position the
indicator over 'SPECIAL' by moving the up or down direction of the Function Setup Switch.
2. Press the Function Setup Switch to confirm.
- OFF : Disabled
PRIVACY : Hide an area you want to hide on the screen.
SPECIAL SETUP
Notes
PRIVACY
DAY/NIGHT
OFF
AUTO
•ꢀꢀOnceꢀ'AUTO'ꢀmodeꢀisꢀset,ꢀtheꢀuserꢀcanꢀconfigureꢀtheꢀSENS-UPꢀlimitꢀbyꢀincreasing/
decreasingꢀtheꢀshutterꢀspeedꢀ(e.g.:ꢀX2,ꢀX4.......ꢀX32,ꢀX64,ꢀX128,ꢀX256,ꢀX512).
•ꢀꢀEnablingꢀSens-Upꢀincreasesꢀcameraꢀsensitivityꢀandꢀmayꢀresultꢀinꢀadditionalꢀnoiseꢀand/
orꢀotherꢀphenomenons.ꢀThisꢀisꢀnormal.
ꢀ When the SPECIAL menu screen is displayed, by
moving the up or down direction of the Function Setup
Switch so that the arrow indicates ‘PRIVACY’.
PRIVACY SETUP
▶ AREA SEL
AREA MODE
MASK COLOR
TOP
BOTTOM
LEFT
RIGHT
RETURN
AREA1
ON
GREEN
39
||||| |||||||||||||||||||
|
||||||| |||||||||||||||||
|
|||||||||||||||||||||||||
|
79
15
||||| |||||||||||||||||||
|
54
ꢁ Set up the mode using the 4 direction buttons.
- AREA SEL :You can select up to 12 MD areas.
- AREA MODE : Determines whether to use the area selected in the AREA SEL.
- MASK COLOR : Determine area color.You can select Green, Red, Blue, Black,White,
Gray.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
33
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
32
Operating Your Camera
DAY/NIGHT :You can display pictures in color or black and white.
Notes
•ꢀꢀWhenꢀusingꢀaꢀVideoꢀAutoꢀIrisꢀLens,ꢀifꢀyouꢀsetꢀtheꢀlensꢀlevelꢀtoꢀlow,ꢀautomaticꢀswitchingꢀ
betweenꢀColorꢀandꢀBlackꢀ&ꢀWhiteꢀmayꢀnotꢀoccur.
•ꢀꢀYouꢀcannotꢀcontrolꢀtheꢀDAY/NIGHTꢀmenuꢀwhenꢀAGCꢀinꢀtheꢀEXPOSUREꢀmenuꢀisꢀ‘OFF’.
Atꢀthisꢀtime,ꢀtheꢀexchangeꢀbetweenꢀDAYꢀmodeꢀandꢀNIGHTꢀmodeꢀoperatesꢀasꢀlikeꢀ
selectingꢀ‘COLOR’ꢀmode.
SPECIAL SETUP
PRIVACY
DAY/NIGHT
DIS
OFF
AUTO
OFF
•ꢀꢀTheꢀOSDꢀkeyꢀdoesꢀnotꢀworkꢀforꢀ3ꢀsecondsꢀwhenꢀswitchingꢀtoꢀColorꢀorꢀB/W,ꢀtoꢀensureꢀ
stableꢀcameraꢀoperation.
•ꢀꢀTheꢀcameraꢀmayꢀfocusꢀlessꢀwellꢀunderꢀinfraredꢀilluminationꢀthanꢀunderꢀnormalꢀ
illumination.
•ꢀꢀSinceꢀtheꢀcameraꢀmayꢀnotꢀfocusꢀasꢀwellꢀunderꢀinfraredꢀilluminationꢀatꢀnightꢀasꢀitꢀdoesꢀ
underꢀnormalꢀillumination,ꢀinstallꢀanꢀExtra-lowꢀDispersionꢀLensꢀtoꢀobtainꢀsharpꢀ
pictures.
ꢀ When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by moving the up or
down direction of the Function Setup Switch so that the arrow indicates 'DAY/NIGHT'.
ꢁ Select a desired mode by moving the left or right direction of the Function Setup
Switch according to the picture display you want.
- AUTO :The mode is switched to 'Color' in a normal environment, but switches to 'B/
W' mode when ambient illumination is low.To set up the switching time or
speed for AUTO mode, press the Function Setup Switch.
•ꢀꢀTheꢀbrightnessꢀofꢀilluminationꢀisꢀchangeableꢀbyꢀinstalledꢀenvironment.
- COLOR :The picture is always displayed in color.
- B/W :The picture is always displayed in black and white.
DIS :The DIS mode can compensate for vibration of the camera.
• DWELL TIME :You can select tday/night switching delay
SPECIAL SETUP
AUTO SETUP
time from.
PRIVACY
DAY/NIGHT
DIS
OFF
AUTO
OFF
▶DWELL TIME
DURATION
RETURN
7 SEC
SLOW
→ 5,7,10,15,20,30,40, 60(sec)
• DURATION :You can select the day/night switching
point(lux).
Notes
•ꢀꢀWhenꢀDISꢀisꢀoperating,ꢀD-ZOOMꢀdoesꢀnotꢀoperate.
Color → B/W
1.5 lux
0.7 lux
B/W → Color
2.0 lux
1.2 lux
Fast
Slow
BURST LEVEL SETUP
||||||||||||||||||||||
|
▶BURST LEVEL
50
※When AGC is middle mode.
RETURN
SYNC :Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK.
In LINE-LOCK mode, it synchronizes the camera's video out signal to the external
SYNC signal.
SPECIAL SETUP
PRIVACY
DAY/NIGHT
DIS
OFF
COLOR
BURST MODE SETUP
▶BURST MODE
ON
OFF
INT
RETURN
SYNC
COMM ADJ
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
35
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
34
Operating Your Camera
• INT : Internal synchronization
- RET PKT :You can choose whether to send an ACK signal when the communication
control command is issued to the camera.
• LL : External line-lock synchronization
· If you choose 'LL', you can adjust the desired phase.
Press the SET button.
IMAGE ADJ : Includes image quality or special function factors.
· You can adjust the desired phase from 0 to 359.
SPECIAL SETUP
COMM ADJ (Communication Adjustment) :
COMMUNICATION SETUP
PRIVACY
DAY/NIGHT
DIS
OFF
AUTO
This function sets up the camera communication status
when controlling the camera through an external
controlled device.
▶PROTOCOL
CAM ID
BAUD RATE
UART MODE
RET PKT
STW
|||||||||||||||||||||||||
|
1
9600
OFF
INT
8-N-1
DISABLE
SYNC
ꢀ
When the SPECIAL menu screen is displayed, by
moving the up or down direction of the Function Setup
Switch so that the arrow indicates ‘COMM ADJ’.
RETURN
COMM ADJ
IMAGE ADJ
MONITOR
CRT
ꢁ Set up the mode moving the 4 direction of Function Setup Switch.
- CAM ID : Determines the camera's identification number (between 0 and 255).
- Protocol : Select the communication PROTOCOL. (STW/PELCO-D/PELCO-P/ BOSCH/
HONEYWELL/VICON/AD/SEC/PANASONIC)
- BAUD RATE :You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE :You can select NONE, EVEN or ODD for the parity bits.
ꢀ
When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by moving the up or
down direction of the Function Setup Switch so that the arrow indicates 'IMAGE ADJ.
ꢁ Select a desired mode by moving the up or down direction of the Function Setup
Switch.
- H-REV :You can flip the picture horizontally on the
IMAGE SETUP
screen.
▶H-REV
V-REV
SHARPNESS
RETURN
OFF
OFF
ON
-
V-REV :You can flip the picture vertically on the screen.
- SHARPNESS :As you increase this value, the picture
outline becomes stronger and clearer.
SHARPNESS SETUP
|||||||||||||||||||| |||||
|
▶LEVEL
RETURN
16
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
37
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
36
Operating Your Camera
Monitor : Please change the settings value of video appropriate to your monitor.
DISPLAY : Us e this feature to designate a name for the camera, which will display on the
monitor screen
SPECIAL SETUP
SPECIAL SETUP
PRIVACY
DAY/NIGHT
DIS
OFF
AUTO
PRIVACY
DAY/NIGHT
DIS
OFF
AUTO
OFF
INT
OFF
INT
SYNC
SYNC
COMM ADJ
COMM ADJ
IMAGE ADJ
MONITOR
DISPLAY
IMAGE ADJ
MONITOR
DISPLAY
CRT
CRT
RETURN
- LCD : Please select this menu item when using an LCD
monitor.
LCD MONITOR SETUP
▶GAMMA
PED LEVEL
0.45
CAM TITLE
ꢀ
|||||||| |||||||||||||||||
|
17
50
||||||||||||| |||||||||
|
COLOR LEVEL
RETURN
Press the Function Setup Switch to display the main setup menu and move the arrow
indicator to ‘CAM TITLE’ by moving the up or down direction of the Function Setup
Switch.
ꢁ Set ‘CAM TITLE’ to ‘ON’ by moving the left or right direction of the Function Setup
Switch.
- CRT : Please select this menu item when using a CRT
monitor.
CRT MONITOR SETUP
Notes
|||||||| |||||||||||||||||
|
▶PED LEVEL
17
50
||||||||||||| |||||||||
|
COLOR LEVEL
RETURN
•ꢀꢀIfꢀtheꢀCAMꢀTITLEꢀfeatureꢀisꢀsetꢀtoꢀ‘OFF’,ꢀtheꢀnameꢀwillꢀnotꢀ
displayedꢀinꢀtheꢀmonitor
DISPLAY SETUP
▶ CAM TITLE
OFF
ON
CAM ID
CAM INFO
ON
MOTION ALARM
ZOOM MAG
FONT COLOR
LANGUAGE
RETURN
OFF
ON
WHITE
ENGLISH
- USER : Please use this menu item when using a monitor
other than standard ones.You can change the
gamma, PED level, and color gain in the sub
menus.
USER MONITOR SETUP
▶GAMMA
PED LEVEL
COLOR LEVEL
RETURN
0.55
|||||||| |||||||||||||||||
|
17
50
||||||||||||| |||||||||
|
ꢂ Press Function Setup Switch.
CAMERA TITLE SETUP
A B C D E F G H I J K L M
NOPQRSTUVWXYZ
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
← → C L R P O S E N D
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
39
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
38
Operating Your Camera
ꢃ You can enter up to 15 characters.
RESET
a. Move the cursor to the character entry field moving left or right direction of
Function Setup Switch.
To reset your camera to factory default condition.
b. Use the 4 direction of Function Setup Switch to select a desired character.
c. Press the Function Setup Switch to confirm the selection of the blinking character.
The character is then saved, and the cursor in the entry field moves to the next
position.
EXIT
d. Repeat steps 'a' through 'c' until the desired name has been entered.
To finish setup menu.
Notes
•ꢀꢀCorrectingꢀMistakes
ꢀ ꢀMoveꢀtheꢀcursorꢀthꢀ‘CLR’ꢀandꢀpressꢀtheꢀFunctionꢀSetupꢀSwitchꢀtoꢀclearꢀtheꢀentireꢀentry.ꢀ
Toꢀmodifyꢀoneꢀcharacter,ꢀuseꢀLEFTꢀorꢀRIGHTꢀtoꢀpositionꢀtheꢀcursorꢀaboveꢀtheꢀcharacterꢀ
toꢀbeꢀmodifiedꢀandꢀclickꢀtheꢀFunctionꢀSetupꢀSwitchꢀafterꢀselectingꢀtheꢀcharacterꢀtoꢀenter.
ꢄ Enter a title, move the cursor to ‘POS’ and press the
Function Setup Switch. The entered title appears on
the screen. Select the position to display the title on
FRONT DOOR
the screen by moving the 4 direction of Function
Setup Switch and press the Function Setup Switch.
When the position is determined, select.
- CAM ID : Displays camera ID on top left corner of the screen.
- CAM INFO : Displays camera information on screen.
- MOTION ALARM :You can toggle the use of the camera alarm.
- ZOOM MAG : Use th is feature to display the current zoom magnification level on
screen. Position the indicator over ‘ZOOM MAG’ by moving the up or
down direction of the Function Setup Switch.Then set to ON by moving
the left or right direction of the Function Setup Switch.
- FONT COLOR :You can select the font color(white,yellow,green,red,blue)
- LANGUAGE :You can select the menu language according to your requirements
(Korean, ESPANOL, FRANCAIS, ITALIANO, DEUTSCH, ENGLISH, Japanese,
Chinese, RUSSIAN, CESKY, POLSKI, PORTUGUESE,Taiwanese, Romanian,
Serbian, Swedish, Danish,Turkish)
- END : Select this to save the SPECIAL menu settings and return to the SPECIAL menu.
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
41
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
40
Troubleshooting
Specifications
If you have trouble operating your camera, refer to the following table.
SVD-4700N
SVD-4700P
If the guidelines do not enable you to solve the problem, contact an authorized technician.
POWER
Input Voltage
Power Consumption
CCD
AC 24V( 10%) , DC 12VV( 10%)
MAX 4.0W
• Nothing appears on the screen.
▶ Check that the power cord and line connection between the camera and monitor are
fixed properly.
Imaging Device
Total Pixels
1/4 inch, Super HAD color CCD
811(H) x 508(V)
▶Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
795(H) x 596(V)
752(H) x 582(V)
• The image on the screen is dim.
▶Is lens stained with dirt? Clean your lens with soft, clean cloth.
Effective Pixels
OPTICS
768(H) x 494(V)
▶Set the monitor to proper condition.
▶If the camera is exposed to too strong light, change the camera position.
Optics
12X f=3.94mm(WIDE) ~ 46.05mm(TELE) / F1.67 ~F1.88
1,800mm(TELE)
Min. Focus Distance
D. ZOOM
OFF/ON (Limit 16x)
• The image on the screen is dark.
▶Adjust the contrast feature of the monitor.
▶If you have an intermediate device, set the 75Ω / Hi-z properly.
Angle Field of view
SYNC
H : Appr. 51.54°(Wide) to 4.50°(Tele) / V : Appr. 39.24°(Wide) to 3.38°(Tele)
Scanning System
Synchronization
Frequency
2:1 Interlace
• The camera is not working properly, and the surface of the camera is hot.
▶Check that you have properly connected the camera to an appropriate power source.
Internal / Line-Lock
H :15.734 KHz / V : 59.94 Hz
H : 15.625 KHz / V : 50.00 Hz
• The SENS-UP function does not work.
▶Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
ELECTRICAL
Resolution
Color : 580TV Lines(Min.) / B/W : 680TV Lines(Min.)
Color : 0.2 Lux/F1.6 (50 IRE) / B/W : 0.004 Lux/F1.6 (50 IRE)
52 dB (AGC Off,Weight ON)
▶Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
Min. Illumination
S/N (Y signal)
Video Output
Focus
• The Motion Detection function does not work.
▶Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
CVBS : 1.0Vp-p/75Ω
Auto / Manual / One push
• Color is not correct.
▶Check the setting of WHITE BAL SETUP menu .
Zoom Movement Speed
IRIS Control
1.9 sec : WIde to Tele
Auto,Manual
• The screen flickers continually.
▶Check that direction of camera turns toward the Sun.
Lens Initialize
Camera Title
Camera ID
Built-In
OFF / ON (Displayed 15 characters)
255 ID Selectable
• When coaxial communication is not available:
Day & Night
Gain Control
White Balance
Back Light Compensation
SHUTTER
Auto / COLOR / B/W
▶Make sure that the camera and monitor are installed within the recommended distance.
LOW / MEDIUM / HIGH / MANUAL / OFF
ATW / AWC / MANUAL / INDOOR / OUTDOOR (1,700k ~ 11,000K)
SSDR / BLC / HLC / OFF
▶Use the video amplifier equivalent to coaxitron if the recommended installation distance
is exceeded.
ESC / FLK / MANUAL (1/60(PAL 1/50)~1/120K sec, x2 ~ x512 sec)
English, Spanish, French, Italian, German,
Korean, English, Japanese, Spanish, Polish, Russian, Czech, Chinese,
O.S.D
French, Portuguese, Taiwanese
Portuguese, Romanian, Serbian, Swedish,
Danish, Turkish
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
43
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
42
Specifications
Dimension
Motion Detection
Control output
SSNR3
ON / OFF (output via communication)
RS-485 (2400,4800,9600,19200,38400,57600bps)
ON / OFF (2D+3D), Level adjustable
STW, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, AD, SEC, PANASONIC
Auto / Off (Selectable x2 ~ x512)
ON / OFF(12 Areas)
Ø 148mm
Protocol
SENSUP
Privacy Function
MIRROR
ON / OFF
PRESET
ON / OFF(128 Point)
ENVIRONMENTAL
Operating Temperature /
Humidity
-10°C to +50°C / 20% to 80% RH
MECHANICAL
Water Resistance
Dimension
Weight
IP66
Ø148 x 126 mm
1.38Kg
※
The specification for this product may change without prior notice for product improvement.
85mm
83.5mm
85mm
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
45
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
44
DECLARATION OF CONFORMITY
MEMO
Application of Council Directive(s)
89 / 336 / EEC
Manufacturer's Name
Manufacturer's Address
SAMSUNG TECHWIN CO., LTD
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-716
European Representative Name
European Representative Address
Equipment Type/Environment
Model Name
CCTV Camera
SVD-4700P
Beginning Serial NO.
C10S7010007
Year of Manufacture
2009.10.22
Conformance to
EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
We, the undersigned, hereby declare that the equipment specified above conforms
to the above Directive(s).
Manufacturer SAMSUNG TECHWIN CO., LTD
Signature
Legal Representative in Europe
Signature
Full Name
Position
Place
Full Name
Position
Place
BONJENG GU
QUALITY CONTROL MANAGER
CHANGWON, KOREA
2009.10.22
Date
Date
COLOR DOME CAMERA
COLOR DOME CAMERA
User Guide
47
UsDer oGuwidenload from Www.Somanuals.com. All Manuals Search And Download.
46
|