Samsung DVD VCR Combo V6700 User Guide

User’s Manual  
DVD-V6700  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Type and Characteristics  
This DVD-VCR is capable of playing the following types of discs with the corresponding logos :  
Disc Types (Logos) Recording Types Disc Size  
Max. Playing Time  
Characteristics  
• DVD contains excellent sound and  
video due to Dolby Digital and  
MPEG-2 system.  
Single-sided 240 min.  
Double-sided 480 min.  
DVD  
12 Cm  
Audio  
+
• Various screen and audio functions  
can be easily selected through the  
on-screen menu.  
Single-sided 80 min.  
Video  
8 Cm  
Double-sided 160 min.  
VIDEO-CD  
74 min.  
12 Cm  
Audio  
+
• Video with CD sound, VHS quality &  
MPEG-1 compression technology.  
Video  
8 Cm  
20 min.  
74 min.  
AUDIO-CD  
12 Cm  
8 Cm  
• CD is recorded as a Digital Signal  
with better audio quality, less distor-  
tion and less deterioration of audio  
quality over time.  
Audio  
20 min.  
- DO NOT play CD-ROM, CD-I and DVD-ROM in this player! (CDGs play audio only, not graphics).  
- It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc  
or condition of the recording.  
- The recorded disc may not run as playback depends on the recording speed.  
- Do not run the player with two discs loaded at the same time.  
Disc Markings  
Play Region Number  
Both the DVD-VCR and the discs are coded by  
region. These regional codes must match in  
order for the disc to play. If the codes do not  
match, the disc will not be played.  
~
Play Region Number.  
PAL colour system in Europe, Australia,  
New Zealand, etc.  
PAL  
NTSC broadcast system in U.S.A,  
Canada, Korea, Japan, etc.  
The Region Number for this player is  
described on the rear panel of the player.  
NTSC  
Dolby Digital disc.  
Stereo disc.  
STEREO  
DIGITAL  
SOUND  
Digital Audio disc.  
DTS disc.  
Disc contains a Divx software product.  
English - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Timer Programming Feature . . . . . . . . . . . . . . . .25  
Checking a Preset Recording . . . . . . . . . . . . . . . . . . . . . . .26  
Cancelling a Preset Recording . . . . . . . . . . . . . . . . . . . . . .27  
Contents  
Getting Started  
Playing Back  
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . .3  
Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Front View of the DVD-VCR (DVD-V6700) . . . . . . . . . . .5  
Rear View of the DVD-VCR (DVD-V6700) . . . . . . . . . . . .5  
Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Inserting Batteries in the Remote Control . . . . . . . . . . . . . . .7  
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . .7  
Playing a Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Adjusting Picture Alignment Manually . . . . . . . . . . . . . . . . .27  
Selecting the Audio Output Mode . . . . . . . . . . . . . . . . . . . .28  
Playing a Cassette in Slow Motion . . . . . . . . . . . . . . . . . . .28  
Playing a Sequence Frame by Frame . . . . . . . . . . . . . . . .28  
Playing a Sequence at Variable Speeds . . . . . . . . . . . . . . .28  
Searching for a Specific Sequence . . . . . . . . . . . . . . . . . . .29  
Using the Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
DVD Functions  
Connections  
Setting Up the Language Features . . . . . . . . . . . . . . . . . . .31  
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . .32  
Setting Up the Display Options . . . . . . . . . . . . . . . . . . . . . .33  
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . .34  
DivX(R) Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . . .37  
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . .38  
Adjusting the Aspect Ratio (EZ View) . . . . . . . . . . . . . . . . .39  
Selecting the Subtitle Language . . . . . . . . . . . . . . . . . . . . .40  
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . .40  
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . .41  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43  
Program & Random Play (CD/MP3/WMA) . . . . . . . . . . . . . . . .44  
Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
DivX/MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Divx/MPEG4 Special Playback Features . . . . . . . . . . . . . .47  
Connecting DVD-VCR to the TV using the RF Cable . . . . 9  
Connecting DVD-VCR to the TV using the  
Audio/Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Connecting DVD-VCR to the TV using the  
S-Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting DVD-VCR to the TV using the  
Component Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting to an AV amplifier with the digital  
input jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Connecting Extend Device . . . . . . . . . . . . . . . . . . . . . . . . 12  
Plug & Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Settings  
Tuning Your Television for the DVD-VCR . . . . . . . . . . . . . .14  
Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Setting the Menu Language . . . . . . . . . . . . . . . . . . . . . . . .15  
Presetting the Stations Automatically . . . . . . . . . . . . . . . . .15  
Presetting the Stations Manually . . . . . . . . . . . . . . . . . . . . .16  
Clearing a Preset Station . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Changing the Preset Station Table . . . . . . . . . . . . . . . . . . .18  
Selecting the RF OUT Sound Mode (B/G-D/K) . . . . . . . . . .19  
Setting the VCR Output Channel . . . . . . . . . . . . . . . . . . . .19  
Reference  
VCR Functions  
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Troubleshooting Guide (VCR) . . . . . . . . . . . . . . . . . . . . . . .50  
Troubleshooting Guide (DVD) . . . . . . . . . . . . . . . . . . . . . . .51  
Selecting the Colour Mode . . . . . . . . . . . . . . . . . . . . . . . . .20  
NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Intelligent Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Auto Power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Selecting the Cassette Type . . . . . . . . . . . . . . . . . . . . . . . . 22  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Selecting the Recording Speed . . . . . . . . . . . . . . . . . . . . . .23  
Protecting a Recorded Cassette . . . . . . . . . . . . . . . . . . . . .23  
Recording a Programme Immediately . . . . . . . . . . . . . . . . .23  
Recording a Programme with Automatic Stop . . . . . . . . . .24  
Recording from Another VCR or Camcorder . . . . . . . . . . . . . .24  
Using the Assemble Edit Function . . . . . . . . . . . . . . . . . . .25  
4 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overviews  
Front View of the DVD-VCR (DVD-V6700)  
1
2
3
4
LINE IN  
2
5
6
7
8
9
10 11 12 13 14 15 16 17  
1. DVD DECK.  
2. OPEN/CLOSE BUTTON.  
10. PROGRAMME SELECTION BUTTON.  
11. DVD/VCR SELECTION BUTTON.  
12. EZ VIEW BUTTON.  
3. VIDEO CASSETE COMPARTMENT.  
4. EJECT BUTTON.  
13. RECORD BUTTON.  
5. STANDBY/ON BUTTON.  
14. REWIND/SKIP BACK BUTTON.  
15. STOP BUTTON.  
6. VIDEO INPUT JACK LINE IN 2.  
7. AUDIO L/R INPUT JACK LINE IN 2.  
16. PLAY/STILL BUTTON.  
8. PROGRESSIVE SCAN MODE BUTTON.  
9. FRONT PANEL DISPLAY.  
17. FAST FORWARD/SKIP NEXT BUTTON.  
Rear View of the DVD-VCR (DVD-V6700)  
1
3
5
7
2
6
4
8
9
1.  
2.  
3.  
4.  
5.  
ANTENA INPUT  
6.  
7.  
8.  
9.  
DIGITAL AUDIO OUT (COAXIAL)  
COMPONENT VIDEO OUT  
DIGITAL AUDIO OUT (OPTICAL)  
S-VIDEO OUT  
RF OUT TO TV  
LINE IN 1 (Audio / Video)  
LINE OUT (Audio / Video)  
LINE AUDIO OUT  
(S-VIDEO OR COMPONENT)  
English - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display Indicators  
1
2
3
4
5
6
1. The DVD Deck is active.  
2. Disc is loaded.  
3. The time, counter position, current deck status is displayed.  
4. Video tape is inserted.  
5. The VCR Deck is active.  
6. A Timer Recording is programmed or in progress.  
6 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Tour of the Remote Control  
Make sure that the following basic accessories  
are supplied with your DVD-VCR.  
16  
17  
1
2
18  
19  
Batteries for  
remote controls  
Owner’s  
Instructions  
RF-Cable  
3
20  
21  
22  
4
5
Audio & Video  
Cable  
Remote Control  
6
7
23  
24  
Inserting Batteries in the Remote  
Control  
8
9
You must insert or replace the batteries in the  
remote control when you:  
• Purchase the DVD-VCR  
25  
26  
• Find that the remote control is no longer  
working correctly  
10  
11  
1 To release the battery compartment cover,  
push the tab in the direction of the arrow and  
lift up.  
12  
13  
27  
28  
14  
15  
29  
30  
2 Insert two AAA, RO3 or equivalent batteries,  
taking care to respect the polarities:  
• + on the battery with + on the remote  
control.  
• – on the battery with – on the remote  
control.  
Do not mix different battery types (manganese  
and alkaline for example).  
3 Replace the cover by aligning it with the base  
of the remote control and push it down.  
English - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. DVD,VCR  
Used to operate DVD, VCR.  
26. RETURN  
Used to return to a previous menu.  
2. STANDBY/ON  
Used to turn the power on or off.  
27. ZOOM  
Used to enlarges picture .  
3. Number buttons  
28. CLEAR  
Used to clear a preset TV station.  
4. TIMER  
Used to cancel a preset recording.  
Used to cancel a preset mark.  
Used to set the tape counter to zero.  
Used to resume normal play during repeat  
play.  
Used to activate the timer recording of  
a programme.  
5. REC ( )  
Used to make a recording on cassette.  
29. MARK  
6. SKIP (  
/
)Use to skip a title, chapter  
Used to mark a position during playback a  
disc.  
or track.  
7. STOP ( )  
Used to stop during playback.  
SEARCH  
Used to search for a specific sequence.  
8. AUDIO  
30. MODE  
Used to access various audio functions.  
Used to select the programme or random  
play.  
9. TRK ( / )  
Used to adjust picture alignment manually to  
obtain the best possible picture during play-  
back.  
REPEAT  
Used to allow the repeat play a title, chapter,  
track, disc or A-B.  
10. MENU  
Used to display the on-screen menu.  
11. OK / ,¥ / Š  
Used to control the cursor in the on-screen  
menu and confirm your choice.  
12. EZ VIEW  
Used to adjust the aspect ratio on a disc.  
13. DISC MENU  
Used to display a disc menu.  
14. SUBTITLE  
Used to change the DVD’s subtitle language.  
15. ANGLE  
Used to access various camera angles on a  
DVD.  
IPC (Intelligent Picture Control).  
Used to adjust the sharpness of the picture.  
16. INPUT SEL.  
Used to select a external input signal.  
17. TV/VCR  
18. INFO.  
Used to display the current setting or disc  
status.  
19. OPEN/CLOSE  
Used to open and close the disc and video  
cassette tray.  
20. SHUTTLE  
Used to play a sequence at variable speeds.  
21. F.ADV/STEP  
Used to advance a sequence frame by  
frame.  
22. SPEED  
Used to select the recording speed.  
23. PLAY/PAUSE (  
) Used to play or pause  
during playback.  
24. SEARCH (  
/
)Used to search forward  
or backward through a disc.  
(
/
)
25. PROG  
Used to select a TV programme.  
8 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting DVD-VCR to the TV  
using the Audio/Video Cable  
Connections  
You can connect your DVD-VCR to the tele-  
vision using the Audio/Video cable if the  
appropriate input is available on the televi-  
sion. You thus:  
Connecting DVD-VCR to the TV  
using the RF Cable  
To receive television programmes a signal  
must be received from one of the following  
sources:  
• Obtain better quality sound and pictures  
• Simplify the setting up procedure of your  
DVD-VCR  
• An outdoor aerial  
• An indoor aerial  
Notes  
• A cable television network  
• A satellite receiver  
Regardless of the type of connection chosen,  
you must always connect the RF Cable sup-  
plied. Otherwise, no picture will be visible on  
the screen when the DVD-VCR is switched off.  
Make sure that both the television and the  
DVD-VCR are switched off before connecting  
the cables.  
Note  
Make sure that both the television and the  
DVD-VCR are switched off before connecting  
the cables.  
1Connect the RF Cable.  
1Remove the aerial or network input cable  
from the television.  
2Connect one end of the Audio/Video cable  
to the Video output and Audio L, R output  
jack on the rear of the DVD-VCR.  
2Connect this cable to the 75Ω coaxial jack  
marked  
on the rear of your DVD-VCR.  
3Plug the other end into the appropriate  
connector on the television.  
3Plug the RF Cable supplied into  
on your DVD-VCR.  
TV  
the jack  
4Plug the other end of the RF Cable into the  
connector previously used for the aerial on  
the television.  
Aerial  
Aerial cable  
Aerial  
Aerial cable  
2
TV  
Yellow  
RF cable  
3
4
RF cable  
ANT IN  
English - 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting DVD-VCR to the TV  
using the S-Video Cable  
Connecting DVD-VCR to the TV  
using the Component Video Cable  
Your TV must support progressive scan input  
to allow you to watch component video output.  
You will enjoy high quality accurate colour  
reproduction images. Component video seper-  
ates the picture element into black and  
white(Y), blue(Pb), red(Pr) signals to present  
most clear and clean images.  
You will enjoy high quality images. S-Video  
seperates the picture element into black and  
white(Y) and colour(C) signals to present  
clearer images than regular video input mode.  
1Connect one end of the S-Video cable into  
the S-VIDEO output jack on the rear of the  
DVD-VCR.  
1Connect Component video cables between  
the COMPONENT VIDEO OUT jacks on the  
rear of the DVD-VCR and COMPONENT  
VIDEO IN jacks on the rear of the TV.  
2Plug the other end of the S-Video cable into  
the appropriate input connector on the  
television.  
3Connect one end of the audio cables sup-  
plied into the AUDIO LINE output jacks on  
the rear of the DVD-VCR.  
2Connect audio cables between the AUDIO  
LINE OUT jacks on the rear of the DVD-VCR  
and AUDIO IN jacks on the rear of the TV.  
Take care to respect the colour coding of  
the left and right channels.  
Take care to respect the colour coding of  
the left and right channels.  
4Plug the other end of the audio cables into the  
appropriate input connectors on the television.  
COMPONENT VIDEO OUT  
1
3
1
2
4
COMPONENT INPUT  
2
COMPONENT VIDEO IN  
10 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an AV amplifier with  
the digital input jack  
Progressive Scan (DVD only)  
If the TV connected supports Progressive Scan,  
press the P.SCAN button on the front panel in  
stop mode.  
To take full advantage of the movie theater  
experience that DVD offers, you may want to  
connect your DVD-VCR to a complete  
Surround Sound system, including an A/V  
Receiver and six Surround Sound speakers.  
If your A/V receiver is equipped with a Dolby  
Digital Decoder, you have the option to bypass  
the DVD-VCR’s built-in Dolby Digital Decoder.  
Use the Digital Audio Out connection below.  
To enjoy Dolby Digital or DTS sound, you must  
set up the audio settings. (See page 33)  
• The message “Press OK to confirm  
Progressive scan mode. Otherwise press  
RETURN.” will be displayed. If you want  
Progressive scan mode, select OK. Make  
sure that the disc has stopped completely  
before changing the mode.  
1Connect a Digital Audio coaxial/optical cable  
from the Digital Audio Out jacks on the panel of  
the DVD-VCR to their corresponding Digital  
Audio Input jacks on your A/V Receiver:  
LINE IN  
2
To cancel the progressive scan mode, press  
the P.SCAN button in stop mode.  
Notes  
Do not press the P.SCAN button if you are using a  
TV that does not support Progressive mode.  
Nothing will be displayed on the screen if pressed.  
To release the Progressive mode, press the  
P.SCAN button in stop mode.  
See your TV User’s Manual to find out if your TV  
supports Progressive Scan.If Progressive Scan is  
supported, follow the TV User’s instructions regard-  
ing Progressive Scan settings in the TV’s menu  
system.  
Depending on your TV, the method of connection  
may differ from the illustration above.  
What is "Progressive Scan"? Progressive scan has  
twice as many scanning lines as the interlace out-  
put method has. Progressive scanning method can  
provide better and clear erpicture quality.  
You must connect the player to the component(s)  
before using the Progressive Scan feature.  
Make sure that the colour coded connections  
match. That is, the Y, Pb and Pr component output  
jacks of your DVD -VCR should be connected to  
the exact corresponding component input jacks on  
your TV. Otherwise, red or blue images will be dis-  
played on the TV screen.  
To Digital Audio Input of an A/V  
Receiver with a Dolby, MPEG2, DTS,  
Digital Decoder  
NTSC DVD disc is not supported.  
English - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Extend Device  
Method 2 : Connecting a  
Camcorder to the LINE IN 2  
jacks  
This allows you to connect your DVD -VCR to  
other external devices and view or record their  
outputs.  
• Method 1 : Connecting a VCR, Set-Top  
Box(STB) or  
You can use the LINE IN 2 jacks on the front  
panel of the DVD-VCR. You can record from  
connected equipment.  
DVD-VCR to the AUDIO/VIDEO  
LINE IN 1 jacks.  
When an input source is inserted into LINE IN 2  
while viewing TV, the input will be switched to  
LINE IN 2 automatically.  
• Method 2 : Connecting a Camcorder to the LINE  
IN 2 in jacks.  
Method 1 : Connecting a VCR,  
set-top Box (STB) Or DVD-VCR to  
the AUDIO/VIDEO LINE IN 1 jacks  
Connecting a VCR or external device to  
AUDIO/VIDEO LINE IN 1 jacks of the DVD-VCR.  
LINE IN  
2
You can record from connected equipment  
(VCR, STB or DVD).  
Notes  
You can also use the LINE IN 2 jacks on the front  
panel of the DVD-VCR.  
When the S-Video jack and Video jack are both  
connected, the S-Video jack will have priority. Line  
Selection will be automatically done  
Copy protected content cannot be recorded.  
12 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plug & Auto Setup  
Auto Setup  
Your DVD-VCR will automatically set itself up  
when it is plugged into the mains for the first time.  
TV stations will be stored in memory. The  
process takes a few minutes. Your DVD-VCR  
will then be ready for use.  
Please Wait  
10%  
ŠŠ  
RETURN  
MENU  
1Connect the RF Cable as indicated on page  
9. (Connecting Your DVD-VCR to the TV  
using the RF Cable)  
6Check the date and time.  
Clock Set  
2Plug the DVD-VCR into the mains.  
• “AUTO” in the front panel display flickers.  
SETUP  
Time  
Date  
Year  
/ 2007 MON  
DVD  
VCR  
12 : 00  
01 / JAN  
PROG  
FUNC  
OK  
RETURN  
MENU  
3The Language Set menu is displayed.  
Refer to “Setting the Date and Time” to  
change the date and time. (see page: 14)  
Language Set  
Š
English  
Français  
Deutsch  
Español  
Italiano  
Notes  
Now, you only have to switch the DVD-VCR  
on and it is ready for use.  
Function for “Plug & Auto Set Up” is fixed  
already. So if you want to change this fixed  
one, you can change. (refer to “Presetting the  
Stations Manually” page 16).  
Nederlands  
êÛÒÒÍËÈ  
OK  
RETURN  
MENU  
4Press the or button to select the  
desired language, then press OK button.  
Start the auto setup.  
Auto Setup will be  
started.  
Check antenna and TV  
cable connection.  
RETURN  
MENU  
5Start the auto scanning.  
The number of stations automatically stored  
by the DVD-VCR depends on the number of  
stations that it has found.  
English - 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Date and Time  
Settings  
Your DVD-VCR contains a 24-hour clock and  
calendar used to:  
• Automatically stop programme recording.  
• Preset your DVD-VCR to record a programme  
automatically.  
Tuning Your Television for the DVD-  
VCR  
You must tune your television for the DVD-VCR  
only if you are using the RF cable.  
You must set the date and time when:  
You purchase the DVD-VCR.  
• Do not forget to reset the time when you  
change clocks from winter to summer time  
and vice versa.  
To view pictures from your DVD-VCR when a  
Scart cable is used, the television must be set to  
the audio/video mode (AV).  
1Switch on the television.  
1Press the MENU button, then press the OK or  
Š button.  
2Switch on the DVD-VCR by pressing the  
/I STANDBY/ON on the front of the DVD-  
VCR or STANDBY/ON on the remote control.  
Setup  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
DVD  
VCR  
Install  
3Select a programme position on the television  
to be reserved for use with your DVD-VCR.  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
4Insert the video cassette in the DVD-VCR.  
Check that the DVD-VCR starts reading the  
cassette; if not, press the ŠII button.  
RETURN  
MENU  
OK  
2Press the or button to select Clock,  
then press the OK or Š button.  
The Clock Set menu is displayed.  
5Start a scan on your television or set the tele-  
vision to UHF channel 38.  
(New Zealand : UHF 36CH)  
3Press the ¥ or Š button to select the hour,  
minutes, day, month, and year. The selected  
option is highlighted. Press the or button  
to set them. The day of the week is displayed  
automatically. Press the OK button.  
6Fine tune the television until the pictures and  
sound are obtained clearly.  
7When the picture and sound are perfectly  
clear, store this channel at the desired  
programme position on the television.  
That programme is now reserved for use with  
your DVD-VCR.  
Clock Set  
SETUP  
Time  
Date  
Year  
DVD  
VCR  
12 : 00  
01 / JAN  
/ 2007 MON  
PROG  
FUNC  
RETURN  
OK  
MENU  
You can hold down the or ‚ꢀbutton to  
scroll more quickly through the values.  
• Press the MENU button to exit the menu.  
14 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Menu Language  
Presetting the Stations  
Automatically  
1Press the MENU button, then press the OK or  
You do not need to preset the stations if you  
have already set them automatically (refer to  
“Plug & Auto Set Up” on page 13).  
Š button.  
Setup  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
Your DVD-VCR contains a built-in tuner used  
to receive television broadcasts.  
You must preset the stations received through  
the tuner. This can be done:  
DVD  
VCR  
Install  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
• Plug & Auto Set up (refer to page 13)  
• Automatically  
• Manually (refer to page 16)  
RETURN  
MENU  
OK  
You can store up to 80 stations.  
2Press the OK or Š button again.  
The Language Set menu is displayed.  
1Press the MENU button, then press the OK  
or Š button.  
Language Set  
Setup  
Š
English  
Français  
Deutsch  
Español  
Italiano  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
DVD  
VCR  
Install  
User Set  
Nederlands  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
êÛÒÒÍËÈ  
OK  
RETURN  
MENU  
RETURN  
MENU  
OK  
3Press the or button to select desired  
language, then press the OK or Š button.  
• Press the MENU button to exit the menu.  
2Press the or button to select Install,  
then press the OK or Š button.  
The Install menu is displayed.  
Autralia Model  
Install  
SETUP  
Auto Setup  
Š
Š
Š
Manual Setup  
DVD  
VCR  
VCR Output CH : CH 38  
PROG  
FUNC  
RETURN  
MENU  
OK  
New Zealand Model  
Install  
SETUP  
Auto Setup  
Manual Setup  
TV System  
Š
Š
Š
Š
DVD  
VCR  
: G  
VCR Output CH : CH 36  
PROG  
FUNC  
RETURN  
MENU  
OK  
English - 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presetting the Stations Manually  
3Press the or button to select Auto  
Setup, Press the OK button.  
A message is displayed, indicating that any  
channels already preset on your DVD-VCR  
will be deleted.  
You do not need to preset the stations manually  
if you have already set them automatically.  
1Press the MENU button, then press the OK or  
Š button.  
Auto Setup  
Setup  
Your data will be lost  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
Press OK to continue  
MENU to exit  
DVD  
VCR  
Install  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
OK  
RETURN  
MENU  
RETURN  
MENU  
OK  
4Press the OK button to start the auto scanning.  
The message Please Wait is displayed.  
2Press the or button to select Install,  
then press the OK or Š button.  
The Install menu is displayed.  
Australia model :  
Auto Setup  
Install  
Please Wait  
SETUP  
Auto Setup  
Š
Š
Š
10%  
Manual Setup  
ŠŠ  
DVD  
VCR  
VCR Output CH : CH 38  
RETURN  
MENU  
PROG  
FUNC  
• The first frequency band is scanned and  
stored, then the DVD-VCR searches for the  
second station and so on.  
RETURN  
MENU  
OK  
New Zealand model :  
When the automatic scanning procedure  
has finished, the DVD-VCR switches  
automatically to programme 1.  
Install  
SETUP  
Auto Setup  
Manual Setup  
TV System  
Š
Š
Š
Š
DVD  
VCR  
• If you wish to cancel the auto scanning  
before the end, press the MENU button.  
: G  
VCR Output CH : CH 36  
PROG  
FUNC  
Notes  
RETURN  
MENU  
OK  
The number of stations automatically stored by the  
DVD-VCR depends on the number of stations that  
it has found.  
3Press the or button to select Manual  
Setup, then press the OK or Š button.  
The TV STATION TABLE menu is displayed.  
The time and date are set automatically from the  
broadcast signal. If the signal is weak or ghosting  
occurs, the time and date may not be set automati-  
cally. In this case, they should be set manually  
(refer to page 14).  
4Press the or button to select the  
required programme number.  
Once the auto scanning procedure has finished,  
some stations may have been stored more than  
once; select the stations with the best reception  
and delete the ones no longer required (refer to  
page 17).  
PR  
1
TV STATION TABLE  
CH  
01  
04  
NAME  
- - - -  
- - - -  
2
3
4
5
›‚ꢀꢀ Š  
DELETE : CLEAR  
SWAPPING : OK  
RETURN  
16 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clearing a Preset Station  
5Press the Š button to preset the station.  
The MANUAL TUNING menu will be dis-  
played.  
Press the ¥ or Š button to start scanning the  
channels. The frequency band is scanned and  
the first station found is displayed.  
If you have stored a TV station:  
• That you do not require  
• At the wrong programme position, you can  
cancel it.  
1Press the MENU button, then press the OK or  
MANUAL TUNING.  
Š button.  
PR  
:
:
:
:
1
CH  
01  
-
Setup  
MFT  
NAME  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
-
-
-
-
DVD  
VCR  
Install  
User Set  
›‚ꢀꢀ¥ꢀŠ  
MEMORY : OK  
RETURN  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
6If necessary, press the or button to  
select MFT, then press the ¥ or Š button to  
adjust the picture.  
RETURN  
MENU  
OK  
2Press the or button to select Install,  
then press the OK or Š button.  
The Install menu is displayed.  
Australia model :  
7Press the or button to select NAME.  
The station name is set automatically from the  
broadcast signal.  
To change the programme’s name, press  
the Š button. The first letter of the name  
flashes.  
Install  
SETUP  
Auto Setup  
Š
Š
Š
Manual Setup  
DVD  
VCR  
VCR Output CH : CH 38  
To...  
Then...  
Select a character  
in the name.  
Press the or ‚ꢀbutton until the  
PROG  
FUNC  
required character is displayed  
(letters, numbers or “-” character)  
.
RETURN  
MENU  
OK  
Move to the next  
previous or  
character  
Press the ¥ or Š button  
respectively.  
New Zealand model :  
Install  
SETUP  
Auto Setup  
Manual Setup  
TV System  
Š
8
If you...  
Then...  
Š
Š
Š
DVD  
VCR  
Wish to store the  
station displayed  
Press OK to store the  
station.  
: G  
VCR Output CH : CH 36  
PROG  
FUNC  
Do not wish to  
store the station  
displayed  
Press the or ‚ꢀbutton until  
the CH is selected.  
Press the ¥ or Š button to  
RETURN  
MENU  
OK  
go on scanning the  
frequency band and display  
the next station.  
3Press the or ‚ꢀbutton to select Manual  
Setup, then press the OK or Š button.  
The TV STATION TABLE menu is displayed.  
9 Repeat this procedure from step 4 onwards,  
until all the required stations have been  
stored.  
TV STATION TABLE  
PR  
CH  
01  
NAME  
- - - -  
1
2
3
4
5
10 Press the MENU button to exit the menu.  
›‚ꢀŠ  
DELETE : CLEAR  
SWAPPING : OK  
RETURN  
English - 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4Press the or button to select required  
preset TV station.  
Press the CLEAR button to delete.  
.4 Press the or button to select required  
preset TV station. The selected station is dis-  
played at the same time on the television  
screen.  
5Repeat the same procedure from step 4  
onwards until all the required stations have  
been cleared.  
5Press the OK button to change the  
programme number assigned to a station.  
TV STATION TABLE  
Changing the Preset Station Table  
PR  
CH  
01  
NAME  
- - - -  
You can rearrange the station table and give  
different programme numbers to the stations  
listed according to your own preferences.  
1
2
3
4
5
1Press the MENU button, then press the OK or  
Š button.  
›‚ꢀꢀ  
SWAPPING : OK  
RETURN  
Setup  
6Press the or button to select required  
position, then press the OK button to swap  
the position.  
For example to move a TV station in  
programme 1 to programme 3.  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
DVD  
VCR  
Install  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
RETURN  
MENU  
OK  
TV STATION TABLE  
PR  
CH  
NAME  
1
2
3
4
5
2Press the or button to select Install,  
then press the OK or Š button. The Install  
menu is displayed.  
01  
- - - -  
Australia model :  
›‚ꢀꢀꢀꢀŠ  
DELETE : CLEAR  
SWAPPING : OK  
RETURN  
Install  
SETUP  
Auto Setup  
Š
Š
Š
Manual Setup  
DVD  
VCR  
• Press the MENU button to exit the menu.  
VCR Output CH : CH 38  
PROG  
FUNC  
RETURN  
MENU  
OK  
New Zealand model :  
Install  
SETUP  
Auto Setup  
Manual Setup  
TV System  
Š
Š
Š
Š
DVD  
VCR  
: G  
VCR Output CH : CH 36  
PROG  
FUNC  
RETURN  
MENU  
OK  
3Press the or ‚ꢀbutton to Select Manual  
Setup, then press the OK or Š button.  
The TV STATION TABLE menu is displayed.  
18 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the RF OUT Sound Mode  
(B/G-D/K) (New Zealand Model only)  
2Press the or button to select Install,  
then press the OK or Š button.  
The Install menu is displayed.  
You can choose the sound mode (B/G or D/K)  
according to the TV set connected to your VCR.  
3Press the or button to select VCR  
Output CH.  
1Press the MENU button, then press the OK  
or Š button.  
Autralia Model  
Setup  
Install  
SETUP  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
Auto Setup  
Š
Š
Š
Manual Setup  
DVD  
VCR  
DVD  
VCR  
Install  
VCR Output CH : CH 38  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
PROG  
FUNC  
RETURN  
MENU  
OK  
RETURN  
MENU  
OK  
New Zealand Model  
2Press the or button to select Install,  
then press the OK or Š button. The Install  
menu is displayed.  
Install  
SETUP  
Auto Setup  
Manual Setup  
TV System  
Š
Š
Š
Š
3Press the or ‚ꢀbutton to select TV  
System, then press the OK or Š button to  
select G or K.  
DVD  
VCR  
: G  
VCR Output CH : CH 36  
PROG  
FUNC  
Install  
SETUP  
Auto Setup  
Manual Setup  
TV System  
Š
Š
Š
Š
RETURN  
MENU  
OK  
DVD  
VCR  
: G  
4Press the OK or ¥ or Š button to select the  
required output channel .  
VCR Output CH : CH 36  
PROG  
FUNC  
Australia Model  
RETURN  
MENU  
OK  
CH28 ..CH38 ..CH69  
• Press the MENU button to exit the menu.  
New Zealand Model  
Setting the VCR Output Channel  
Your DVD-VCR output channel may need to be  
changed if the pictures suffer from interference  
or if your TV cannot find the pictures.  
CH21 ..CH36 ..CH69  
• Press the MENU button to exit the menu.  
Then tune your television again (see page 14)  
You can select the required output channel  
directly by using the number button.  
1Press the MENU button, then press the OK  
or Š button.  
Setup  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
DVD  
VCR  
Install  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
RETURN  
MENU  
OK  
English - 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3Press the OK or Šꢀbutton to select required  
colour system.  
Auto PAL MESECAMB/W  
Auto: When playing back a cassette,  
the system standard is automatically  
selected by the DVD-VCR.  
VCR Functions  
Selecting the Colour Mode  
Before recording or playing back a cassette,  
you can select the required system standard.  
Otherwise, the system automatically selects the  
reception standard when you select AUTO.  
• When playing back a cassette, the standard is  
automatically selected by the DVD-VCR.  
• When you playback an NTSC-recorded tape  
on this DVD-VCR make a setting on the colour  
system according to your TV. If your TV is a  
PAL system only TV, set NTPB. If your TV is  
multi system TV (NTSC 4.43 compatible), set  
NT4.43 and you can record NT4.43.  
B/W: Black and White.  
NICAM  
(New Zealand Model only)  
NICAM programmes are divided into 3 types.  
NICAM Stereo, NICAM Mono and Bilingual  
(transmission in another language).  
NICAM programmes are always accompanied by  
a standard mono sound broadcast and you can  
select the desired sound. Please refer to page 28.  
1Press the MENU button, then press the OK or  
Š button.  
1Press the MENU button, then press the OK  
or Š button.  
Setup  
Setup  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
DVD  
VCR  
DVD  
VCR  
Install  
Install  
User Set  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
PROG  
FUNC  
RETURN  
MENU  
OK  
RETURN  
MENU  
OK  
2Press the or button to select User Set,  
then Press the OK or Š button.  
The User Set menu is displayed.  
2Press the or button to select User Set,  
then press the OK or Š button.  
The User Set menu is displayed.  
Australia model :  
3Press the or button to select NICAM, then  
press the OK or Š button to select On or Off.  
User Set  
SETUP  
Colour System  
IPC  
: Auto  
: On  
Š
Š
User Set  
SETUP  
Colour System  
NICAM  
: Auto  
: ON  
: On  
Š
Š
Š
DVD  
VCR  
DVD  
VCR  
IPC  
PROG  
FUNC  
PROG  
FUNC  
RETURN  
MENU  
OK  
RETURN  
MENU  
OK  
New Zealand model :  
On (for NICAM mode):  
Normally set at this position  
User Set  
SETUP  
Colour System  
NICAM  
: Auto  
: ON  
: On  
Š
Š
Š
Off (for MONO mode):  
DVD  
VCR  
Only set at this position to record  
the standard mono sound during a NICAM  
broadcast if the stereo sound is distorted  
due to inferior reception conditions.  
IPC  
PROG  
FUNC  
RETURN  
MENU  
OK  
20 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intelligent Picture Control  
Auto Power Off  
This feature allows you to adjust the sharpness  
of the image automatically, according to your  
own preferences.  
This feature automatically turns off your DVD-  
VCR if no signal is received and you do not  
press any button for the selected time.  
1During playback, press the MENU button,  
then press the OK or Š button.  
1Press the MENU button, press the OK or Š  
button.  
Setup  
2Press the or button to select User Set,  
then press the OK or Š button.  
The User Set menu is displayed.  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
DVD  
VCR  
Install  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
3Press the or button to select IPC  
(Intelligent Picture Control), then press the OK  
or Š button.  
PROG  
FUNC  
RETURN  
MENU  
OK  
Australia model :  
User Set  
2Press the or button to select Auto  
Power Off.  
SETUP  
Colour System  
IPC  
: Auto  
: On  
Š
Š
DVD  
VCR  
Setup  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
SETUP  
PROG  
FUNC  
DVD  
VCR  
Install  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
RETURN  
MENU  
OK  
PROG  
FUNC  
New Zealand model :  
RETURN  
MENU  
OK  
User Set  
SETUP  
Colour System  
NICAM  
: Auto  
: On  
Š
Š
Š
3 Press the OK or Š button to select the  
DVD  
VCR  
preset interval.  
IPC  
: On  
Off 1 Hour 2 Hour 3 Hour  
PROG  
FUNC  
• Press the MENU button to exit the menu.  
RETURN  
MENU  
OK  
You can select the modes simply by press-  
ing the IPC button.  
4To adjust the sharpness manually, press the  
button to turn the IPC mode OFF.  
The sharpness of the picture is adjusted  
manually.  
Press the ¥ or Š buttons until the picture is  
displayed according to your preferences.  
PICTURE  
IPC  
:
OFF  
SOFTEN  
SHARPEN  
¥Š  
ON/OFF :  
English - 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Messages  
Selecting the Cassette Type  
Your DVD-VCR displays most information both  
the DVD-VCR and the television.  
If you wish to use the tape counter to display the  
time remaining on a cassette, you must indicate  
the type of cassette inserted.  
You can choose to display or hide this informa-  
tion on the television screen (If you configure  
the Screen Message to Off, the Fast Forward  
and Rewind messages will not be displayed on  
the screen. However, the Search Message will  
not be displayed on the screen regardless of  
the Screen Message configuration).  
1Press the MENU button, then press the or  
button to select VCR.  
2Press the OK or Š button.  
The Tape Select is highlighted.  
VCR Setup  
1Press the MENU button, then press the OK  
or Š button.  
Tape Select  
Repeat Play  
: E180  
: Off  
Š
Š
SETUP  
DVD  
VCR  
Setup  
SETUP  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
PROG  
FUNC  
DVD  
VCR  
Install  
User Set  
RETURN  
OK  
MENU  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
3Press the OK or Š button to select the  
correct cassette length.  
E180 E240 E260 E300  
RETURN  
MENU  
OK  
2Press the or button to select Screen  
Messages.  
• Press the MENU button to exit the menu.  
Setup  
Language  
Clock  
: English  
Š
Š
Š
Š
Š
Š
SETUP  
Repeat Play  
DVD  
VCR  
Install  
You can set repeat play to repeat the tape  
continously from beginning to end.  
User Set  
Auto Power Off  
Screen Messages  
: Off  
: On  
PROG  
FUNC  
1Press the MENU button, then press the or  
button to select VCR.  
RETURN  
MENU  
OK  
2Press the OK or Š button, then press the  
orbutton to select Repeat Play.  
3Press the OK or Š button to select On or  
Off.  
Press the OK or Š button to select On or Off.  
On : Select to display on-screen informa-  
tion.  
VCR Setup  
Off : Select to hide on-screen information.  
• Press the MENU button to exit the menu.  
Tape Select  
Repeat Play  
: E180  
: Off  
Š
Š
SETUP  
DVD  
VCR  
PROG  
FUNC  
OK  
RETURN  
MENU  
On: Repeat play.  
Off: Do not wish to repeat play.  
22 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the Recording Speed  
Recording a Programme  
Immediately  
You can record a cassette at two different  
speeds:  
• SP (Standard Play)  
Before recording a programme, you must have  
preset the corresponding station (unless you are  
recording via an external video source). If you  
have not done so, refer to pages 15~16.  
• LP (Long Play)  
In Long Play modes:  
• Each cassette lasts twice as long  
• The recording is of a slightly lower quality  
1Switch on the television.  
1Press the SPEED button to select SP or LP.  
• The selected record speed will appear on  
the front panel display.  
2Insert the video tape in to the VCR deck, with  
the window visible and the safety tab intact or  
the opening covered with adhesive tape. The  
DVD-VCR is switched on automatically.  
3Select the station by pressing the PROG  
(
or ) button or select the source (LINE IN  
1, LINE IN 2) by pressing the INPUT SEL.  
button for a satellite tuner or external video  
source. The station number is displayed and  
the programme can be seen on the television.  
Type  
E180  
E240  
E260  
E300  
Recording Time (in SP)  
180 mins. or 3 hours  
240 mins. or 4 hours  
4Select the recording speed by pressing the  
SPEED button as many times as required  
(Refer to page 23).  
260 mins. or 4 hours and 20 mins.  
300 mins. or 5 hours  
5Hold down the REC () button for a while to  
start recording.  
The record indicator appears on the television  
and DVD-VCR display. An index is recorded  
on the tape (Refer to page 29).  
Protecting a Recorded Cassette  
Video cassettes have a safety tab to prevent  
accidental erasure. When this tab has been  
removed, you cannot record on the tape.  
1If you wish to protect a cassette, break off the  
tab using a small screwdriver.  
6To stop recording, press the button once.  
• If your DVD-VCR ejects the cassette when  
you start recording, check to make sure  
that the cassette’s safety tab is intact or  
that the opening (Created by a broken  
safety tab) is overed with adhesive tape.  
• If you reach the end of the tape while  
recording, the cassette rewinds  
2To re-record over a protected cassette (safety  
tab broken), cover the hole with adhesive  
tape.  
automatically.  
English - 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording a Programme with  
Automatic Stop  
Recording from Another VCR or  
Camcorder  
You can copy a cassette to your DVD-VCR from  
another video source, such as another VCR or a  
Camcorder etc.  
This function enables you to record up to nine  
hours (LP) of programmes.Your DVD-VCR stops  
automatically after the requested length of time.  
• It is an infringement of copyright laws to copy  
prerecorded cassettes or to re-record them in  
any form without the permission of the owners  
of the corresponding copyright.  
1Switch on the television.  
2Insert the cassette on which the programme  
is to be recorded, with the window visible and  
the safety tab intact or the opening covered  
with adhesive tape. The DVD-VCR is  
switched on automatically.  
1Connect the output jack of your external  
devices to the LINE IN 1 or LINE IN 2 on the  
front or rear of the DVD-VCR.  
2Insert a blank cassette in your DVD-VCR.  
3Select the station to be recorded by pressing  
the PROG( or ) button or select the  
source (LINE IN 1, LINE IN 2) by pressing the  
INPUT SEL. button for a satellite tuner or  
external video source. The station number is  
displayed and the programme can be seen on  
the television.  
3Insert the pre-recorded cassette in the other  
video source (VCR or Camcorder etc).  
4Press the INPUT SEL. button to select the  
appropriate input on your DVD-VCR:  
• LINE IN 1, LINE IN 2 for the audio/video input.  
4Select the recording speed by pressing the  
SPEED button as many times as required  
(Refer to page 23).  
5Start playing back the cassette to be copied.  
6Hold down the REC () button for a while to  
start recording on your DVD-VCR.  
5Hold down the REC () button for a while to  
start recording. The record indicator appears  
on the television screen and DVD-VCR dis-  
play. An index is recorded on the tape (Refer  
to page 29).  
7When you have finished recording, press the  
button on both VCR and DVD-VCR.  
• If you wish to view the cassette being  
copied, your DVD-VCR must be connected  
as usual to the television (Refer to page 9  
for further details).  
6Press the REC () button several times to  
increase the recording time in:  
• 30-minute intervals up to four hours.  
• 1-hour intervals up to nine hours.  
The length is displayed on the television dis-  
plays. The selected programme is recorded  
for the length of time requested. At the end of  
that time, the DVD-VCR stops recording auto-  
matically and power off.  
LENGTH 2:30  
SET LENGTH :  
PRESS REC  
7If you wish to cancel the recording before the  
end, press the STANDBY/ON button.  
• If the end of the tape is reached while  
recording, the recording stops and power off.  
24 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Assemble Edit Function  
Using The Timer Programming  
Feature  
This function allows you to start a new recording  
at a specific position on the cassette while main-  
taining a very smooth scene change.  
The Timer Programming feature allows you to  
preset the DVD-VCR to record a programme up  
to one month before that programme is to be  
broadcast. Up to six programmes can be preset.  
• Before presetting a recording, check that the  
Date and Time are correct.  
1Insert the cassette to be edited in your  
DVD-VCR.  
2Press the Šll button to start playback.  
You must check that the cassette tape is  
loaded.  
3When you reach the position from which you  
wish to start the new recording,  
press the Šll button.  
1Press the MENU button, then press the or  
button to select PROG.  
Timer Method  
4Press the F.ADV/STEP button as often as  
necessary to advance frame by frame, until  
the exact recording position is located.  
SETUP  
If you want to set the  
DVD  
timer program, press  
VCR  
the OK key.  
5While the DVD-VCR is in still mode, hold  
down the REC () button for a while to acti-  
vate the assemble edit function. The mode is  
changed to pause.  
PROG  
FUNC  
RETURN  
OK  
MENU  
2Press the OK or Š button. The timer pro-  
gramming menu is displayed.  
6Select the source from which you wish to  
record by pressing:  
• The PROG  
channels.  
or  
button for television  
3Press the OK or Š button to select PR, then  
press the orbutton to select the required  
station.  
• The INPUT SEL. button for the LINE IN 1,  
LINE IN 2 input source.  
• Press the INPUT SEL. button to select an  
input source (LINE IN 1, LINE IN 2) other  
then the tuner.  
7Press the Šll button to start recording.  
If you want to finish the recording, press the  
button.  
4Press the Š button to select Day, then press  
the or button to select the required day.  
PR  
01  
Day  
Start  
Stop  
Speed  
:
:
MO 01  
:
:
:
:
:
:
:
:
:
:
RETURN  
MENU  
OK  
English - 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLY  
W-SU  
W-MO  
: Daily  
: Weekly Sunday  
Weekly Monday  
9 Press the MENU button to exit the menu.  
10 Press the STANDBY/ON button to activate  
the timer.  
W-SA  
MO 01  
Weekly Saturday  
: Monday 01  
5Press the Š button to select Start (Start time  
of recording).  
Before starting recording, the DVD-VCR  
compares the timer duration with the  
remaining time on the cassette.  
PR  
01  
Day  
Start  
Stop  
Speed  
:
MO 01  
13 : 25  
:
:
:
:
Checking a Preset Recording  
:
:
:
:
:
:
You can check your preset recordings:  
• When you have finished presetting the DVD-  
VCR  
RETURN  
MENU  
OK  
• If you have forgotten which programmes will  
be recorded.  
6Press the Š button to select Stop (Recording  
stop time).  
• Press the ¥ or Š button to select the hour  
or minute.  
1Press the MENU button, then press the or  
button to select PROG.  
The Timer Method menu is displayed.  
• Press the or button to set the stop  
time.  
Timer Method  
SETUP  
DVD  
7Press the Š button to select Speed  
(Recording speed).  
If you want to set the  
VCR  
timer program, press  
the OK key.  
PROG  
FUNC  
PR  
Day  
Start  
Stop  
Speed  
SP  
01  
MO 01  
13 : 25  
19 : 57  
OK  
RETURN  
MENU  
:
:
:
:
:
:
:
:
:
:
2Press the OK or Šbutton. The list of preset  
recodings is displayed with the corresponding  
information.  
RETURN  
MENU  
OK  
PR  
Day  
Start  
Stop  
Speed  
• Press the or button to select the  
required recording speed.  
Auto SP (Standard Play) LP (Long  
Play)  
01  
MO 01  
13 : 25  
19 : 57  
SP  
-- -- -- --  
:
-- --  
:
:-- --  
:
:
:
:
:
:
:
Auto Tape Speed Select  
The DVD-VCR’s “Auto Tape Speed Select”  
function compares the duration of the timer  
recording to the actual recording time remain-  
ing on the tape loaded. If there is insufficient  
tape to complete a timer recording in Auto  
mode, the DVD-VCR automatically switches  
to LP mode to record the whole programme.  
RETURN  
MENU  
OK  
• It can be displayed simply by pressing the  
TIMER button on the remote control.  
8 When you have finished, press the OK button  
to set the Timer Programming.  
26 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3To change any values, select the required  
programme by pressing the œ or ƒ button,  
then change any values as required. For  
more details refer to page 25. (Step 2 to 9).  
• Press the MENU button to exit the menu.  
Playing Back  
Playing a Cassette  
This function allows you to play any pre-  
recorded cassette.  
Cancelling a Preset Recording  
1Switch on both the television and your  
You can cancel any programmes that are:  
• Incorrect  
DVD-VCR.  
• No longer required  
2If the safety tab on the cassette is removed,  
the cassette is played automatically.  
• When a cassette is loaded, the tape position  
is optimized automatically to reduce  
disturbance (Digital Auto Tracking).  
• When playing a cassette, if the end of the  
tape is reached, the cassette is rewound  
automatically. NTSC tapes can be played  
back but cannot be recorded with this DVD-  
VCR.  
1Press the MENU button, then press the œ or  
ƒ button to select PROG . The Timer  
Method menu is displayed.  
Timer Method  
SETUP  
If you want to set the  
DVD  
timer program, press  
VCR  
the OK key.  
PROG  
FUNC  
3Press the (stop) button to stop the  
RETURN  
OK  
MENU  
playback.  
Press the  
playback.  
(eject) button to eject the  
2Press the OK or ‹¤button. The list of preset  
recodings is displayed with the corresponding  
information.  
• It can be displayed simply by pressing the  
TIMER button on the remote control.  
Adjusting Picture Alignment  
Manually  
3 Press the œ or ƒ button to select the  
programme to be cancelled,then press the  
CLEAR button .  
This feature allows you to adjust the alignment  
manually to obtain the best possible picture.  
When noise bars or streaks appear during play-  
back, adjust alignment manually by pressing the  
TRK (œ or ƒ) button until the picture is clear  
and stable.  
PR  
Day  
Start  
Stop  
Speed  
-- -- -- --  
:-- --:-- --  
:
:
:
:
• The tracking bar appears.  
• The image is adjusted.  
:
:
:
:
:
:
RETURN  
MENU  
OK  
• All the recording information is deleted and  
broadcast will not be recorded.  
• Press the MENU button to exit the menu.  
English - 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the Audio Output Mode  
Playing a Sequence Frame by  
Frame  
You can select the mode in which the sound is  
reproduced on the loudspeakers and AV outputs.  
The following options are available.  
Press the AUDIO button on the remote control  
until the required option is displayed.  
You can  
• Stop the cassette at a given frame (image)  
• Advance one frame at a time  
No sound is heard when playing back frame by  
frame.  
L R MIX MONO L R  
1Press the :  
Option Description  
ll button to start playing the cassette.  
ll button again to make still mode.  
F.ADV button to advance frame by frame.  
ll button to return to normal playback.  
• Vertical stability: When playing back frame  
by frame, interference may be seen on the  
screen. Press the TRK (œ or ƒ) button to  
minimize this effect.  
L
Used to listen to the sound on the left Hi-Fi channel.  
R
Used to listen to the sound on the right Hi-Fi  
channel.  
MIX  
Used to listen to the mixed sound of the Hi-Fi and  
normal channels.  
MONO Used to listen to the sound on the normal mono  
channel.  
L R  
Used to listen to Hi-Fi stereo sound on the left  
and right channels  
• When playing back tapes recorded in Hi-Fi, the  
sound switches to Hi-Fi after five seconds of Mono.  
Playing a Sequence at Variable  
Speeds  
Playing a Cassette in Slow Motion  
You can vary the playback speed using the  
Shuttle function (up to nine times the normal  
speed). Example: You wish to analyse a sports  
person’s technique, movement by movement.  
• No sound is heard when playing a sequence  
at variable speeds.  
You can play a cassette in slow motion.  
• No sound is heard when playing back a  
cassette in slow motion.  
1Press the :  
ll button to start playing the cassette.  
ll button again to make still mode.  
‹‹ button to start slow mode.  
¦¦ or ‹‹ button as many times as  
required to decrease or increase the  
speed respectively.  
1Press the :  
ll button to start playing the cassette.  
SHUTTLE (<<) button to play the cassette  
backwards.  
SHUTTLE (>>) button to play the cassette  
forwards.  
ll button twice to return to the normal  
speed.  
• The slow motion feature does not support  
running video backwards.  
2Each time you press the SHUTTLE button,  
the speed is changed as shown in the  
following illustration.  
2When playing back in slow motion, picture  
interference may occur.  
Press the TRK (œ or ƒ) button to minimize  
this effect.  
REVERSE REVERSE REVERSE  
SLOW  
SLOW  
PLAY PLAY PLAY  
PLAY  
X9  
PLAY  
X5  
PLAY  
X3  
STILL MOTION MOTION PLAY X3  
X5  
X9  
X1/10  
X1/5  
• When you have been using the Slow Motion  
function for more than about two minutes,  
the DVD-VCR will automatically play to  
protect the:  
- Cassette.  
- Video heads.  
28 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching for a Specific Sequence  
End Search  
Use this feature when you want to search for  
a blank position to record a program on a  
cassette.  
Each time you record a cassette on this DVD-  
VCR, an “index” is automatically marked on the  
tape when recording starts. The Search function  
allows you to fast-forward or rewind to a specific  
index and start playback from that point.  
Depending on the direction selected, the index-  
es are numbered as follows:  
The VCR will fast forward, searching for a  
blank position, and then automatically stop at  
that position. If the VCR reaches the end of  
the tape during end search, the tape will be  
ejected.  
1Press the SEARCH button. The VCR  
Function menu is displayed. Press the œ  
or ƒ button to select End Search.  
Prev  
Seq.  
Seq. being  
played  
Next  
Seq.  
etc.  
etc.  
2
1
1
2
VCR Function  
• This DVD-VCR uses a standard indexing  
system (VISS). As a result, it will recognize  
any indexes marked by other VCRs using the  
same system and vice versa.  
Go To [0:00:00]  
SETUP  
End Search  
DVD  
Intro Scan  
VCR  
PROG  
FUNC  
Go To [0:00:00] Stop  
OK  
RETURN  
MENU  
Use this feature when you want to search for  
the 0:00:00 counter position on a cassette.  
Press the CLEAR button at the point on the  
tape where you want to set the counter to  
0:00:00. The VCR will rewind or fast forward,  
searching for the 0:00:00 counter position, and  
then automatically stop at that position.  
2Press the OK or button.  
Intro Scan  
1Press the SEARCH button.  
1Press the MENU button, then press the œ or  
ƒ button to select FUNC. The Function  
menu is displayed. Press the OK or button.  
The VCR Function menu is displayed.  
Press the œ or ƒ button to select Intro  
Scan.  
VCR Function  
2Press the œ or ƒ button to select VCR  
Function, then press the OK or button.  
The VCR Function menu is displayed with  
the Go To [0:00:00] selected.  
Go To [0:00:00]  
SETUP  
End Search  
DVD  
Intro Scan  
VCR  
PROG  
FUNC  
VCR Function  
SETUP  
Go To [0:00:00]  
OK  
RETURN  
MENU  
DVD End Search  
Intro Scan  
VCR  
2Press the OK or button.  
PROG  
FUNC  
3Press the ¦¦ or ‹‹ button depending  
on the direction where your desired pro-  
gramme is located.  
OK  
RETURN  
MENU  
• It can be displayed simply by pressing the  
SEARCH button.  
INTRO SCAN : ¦¦ ‹‹  
3Press the OK or button again.  
English - 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Tape Counter  
4When an Index mark is found the DVD-VCR  
will playback the tape for 5 seconds, after  
which it will continue searching for the next  
Index mark  
The tape counter:  
• Indicates the elapsed time in the play and  
record modes (Hours, Minutes and Seconds).  
• Is reset when a cassette is inserted in the  
DVD-VCR.  
INTRO SCAN : ¦¦  
• Allows you to find the beginning of a sequence  
easily.  
• If the remaining time is to be calculated  
correctly, you must indicate the type of  
cassette being used.  
5If you want to watch the tape from a  
particular Index, press the ll button twice.  
Index Skip Search  
This feature will enable you to fast  
1Insert a cassette in your DVD-VCR.  
To set the tape counter to zero at the begin-  
ning of a sequence:  
forward/rewind to a specific point on a tape: e.g.  
If you have recorded 3 different programmes on  
a tape and you have rewound the tape to the  
beginning, by using this feature you can go  
directly to the start of programme 2 simply by  
pressing the SEARCH button.  
0:00:00  
1Press the SEARCH button.  
• Press the INFO button twice to display the  
counter.  
• Press the CLEAR button when you want to  
set the tape counter to zero.  
The VCR Function menu is displayed.  
Press the œorƒ¤button to select Intro Scan.  
VCR Function  
Go To [0:00:00]  
SETUP  
2When you are ready,  
End Search  
DVD  
• Start Playback or Recording.  
Intro Scan  
VCR  
• Press the button.  
PROG  
FUNC  
To fast-froward or rewind to the sequence at  
which the counter was set to zero, press the  
¦¦ or ‹‹ button.  
OK  
RETURN  
MENU  
• Some DVD-VCR information, such as the  
counter, can be displayed on the television  
screen (Unless you have deactivated the  
Screen Messages mode; refer to page 22).  
2Press the OK or button.  
3Press the ¦¦ or ‹‹ button twice more.  
4These Index searches can be made forwards  
(press the ‹‹ button) or backwards (press  
the ¦¦ button).  
Press the INFO button:  
• Once to display the current function,  
programme number, recording speed, time  
and counter.  
(¦¦ -20  
0
+20 ‹‹)  
This will take you directly to the start of the  
desired programme is located.  
• Twice to display the counter only.  
• Three times to display the time remaining on  
the cassette.  
INDEX SEARCH : ¦¦ -06  
• Four times to clear the display.  
To cancel an Index search simply press the  
ll or button.  
30 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Audio Language  
DVD Functions  
Setting Up the Language Features  
1Press the MENU button in the stop mode.  
Press the œ or ƒ button to select DVD, then  
press the OK or ‹¤button.  
If you set disc menu, audio and subtitle lan-  
guage in advance, it will come up automatically  
every time you watch a movie.  
DVD Setup  
SETUP  
DVD  
Language Setup  
Audio Setup  
Display Setup  
VCR  
Using the Disc Menu Language  
Parental Setup :  
Divx (R) Registration  
PROG  
FUNC  
1Press the MENU button in the stop mode.  
Press the œ or ƒ button to select DVD, then  
press the OK or ‹¤button.  
OK  
RETURN  
MENU  
DVD Setup  
2Press the OK or ‹¤button again.  
Press the œ or ƒ¤button to select Audio,  
then press the OK or ‹¤button.  
SETUP  
DVD  
Language Setup  
Audio Setup  
Display Setup  
VCR  
Parental Setup :  
Divx (R) Registration  
Language Setup  
PROG  
FUNC  
Disc Menu  
Audio  
: English  
: English  
: English  
OK  
RETURN  
MENU  
Subtitle  
2Press the OK or ‹¤button again.  
Press the œ or ƒ¤button to select Disc  
Menu, then press the OK or button.  
OK  
RETURN  
MENU  
Language Setup  
3 Press the œ or ƒ button to select the  
Disc Menu  
Audio  
: English  
: English  
: English  
required language.  
Subtitle  
Audio Language  
English  
Français  
Deutsch  
Español  
Italiano  
Audio  
OK  
RETURN  
MENU  
Nederlands  
Original  
Others  
3Press the œ or ƒ button to select the  
required language.  
OK  
RETURN  
MENU  
Disc Menu Language  
• Select Original if you want the default  
soundtrack language to be the original  
language the disc is recorded in.  
• Select Others if the language you want is  
not listed.  
English  
Français  
Deutsch  
Español  
Italiano  
Disc Menu  
Nederlands  
Others  
4Press the OK button.  
OK  
RETURN  
MENU  
• Select Others if the language you want is  
not listed.  
English - 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the Audio Options  
Using the Subtitle Language  
1Press the MENU button in the stop mode.  
Press the œ or ƒ button to select DVD, then  
press the OK or ‹¤button.  
1Press the MENU button in the stop mode.  
Press the œ or ƒ button to select DVD, then  
press the OK or ‹¤button.  
DVD Setup  
DVD Setup  
SETUP  
DVD  
Language Setup  
Audio Setup  
SETUP  
DVD  
Language Setup  
Audio Setup  
Display Setup  
VCR  
Display Setup  
VCR  
Parental Setup :  
Divx (R) Registration  
Parental Setup :  
Divx (R) Registration  
PROG  
FUNC  
PROG  
FUNC  
OK  
RETURN  
MENU  
OK  
RETURN  
MENU  
2Press the OK or ‹¤button again.  
Press the œ or ƒ¤button to select Subtitle,  
then press the OK or ‹¤button.  
2Press the œ or ƒ¤button to select Audio  
Setup, then press the OK or ‹¤button. The  
Audio Setup menu is displayed.  
Language Setup  
Audio Setup  
Disc Menu  
Audio  
: English  
: English  
: English  
Dolby Digital Out  
MPEG-2 Digital Out  
DTS  
: PCM  
: PCM  
: Off  
Subtitle  
Dynamic Compression  
PCM Down Sampling  
: On  
: On  
OK  
RETURN  
MENU  
OK  
RETURN  
MENU  
3 Press the œ or ƒ button to select the  
3Press the œ or ƒ button to select the  
required language.  
required item.  
Subtitle Language  
4Press the OK or ‹¤button to select the  
Automatic  
English  
Français  
Deutsch  
Español  
Italiano  
required option.  
Subtitle  
Dolby Digital Out  
Nederlands  
Others  
PCM: Converts to PCM (2CH) audio.  
Select PCM when using the Analog  
Audio Outputs.  
OK  
RETURN  
MENU  
Bitstream: Converts to Dolby Digital Bitstream  
(5.1CH).Select Bitstream when  
using the Digital Audio Output.  
• Select Automatic if you want the subtitle  
language to be the same as the language  
selected as the audio language.  
• Select Others if the language you want is  
not listed.  
Note  
Be sure to select the correct Digital Output or no  
audio will be heard.  
4Press the OK button.  
MPEG-2 Digital Out  
PCM: Converts to PCM (2CH) audio.  
Select PCM when using the Analog  
Audio Outputs.  
Bitstream: Converts to MPEG-2 Digital  
Bitstream (5.1CH or 7.1CH).  
Select Bitstream when using the  
Digital Audio Output.  
Note  
Some discs may not contain the language you  
select as your initial language; in that case the disc  
will use its original language setting.  
32 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DTS  
2Press the œ or ƒ button to select Display  
Setup, then press the OK or ‹¤button.  
Off: Doesn’t output digital signal.  
On: Outputs DTS Bitstream via digital output  
only. Select DTS when connecting to a  
DTS Decoder  
Display Setup  
TV Aspect  
: 4:3 L-Box  
: Off  
Black Level  
NTSC Disc Output  
: PAL 60  
Dynamic Compression  
On: To select dynamic compression.  
OK  
RETURN  
MENU  
Off: To select the standard range.  
3Press the œ or ƒ button to select TV Aspect,  
PCM Down Sampling  
press the OK or ‹¤button.  
TV Aspect  
On: Select this when the amplifier connected  
to the player is not 96KHz compatible. In  
this case, the 96KHz signals will be down  
converted to 48KHZ.  
4:3 Letter Box  
4:3 Pan Scan  
16:9 Wide  
Off: Select this when the amplifier connected  
to the player is 96KHz compatible. In  
this case, all signals will be output with  
out any changes.  
OK  
RETURN  
MENU  
4Press the œ or ƒ button to select the  
required item, then press the OK button to  
select the required option.  
Notes  
How to make the DVD menu disappear or return to  
menu screen during set up; Press RETURN or ¦  
button.  
Manufactured under license from Dolby  
Laboratories. “Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
TV Aspect  
Depending on the type of television you have,  
you may want to adjust the screen setting  
(Aspect Ratio).  
“DTS” and “DTS Digital Out” are trademarks of  
Digital Theater Systems, Inc.  
4:3 Letter Box :  
Select when you want to see the total 16:9  
ratio screen DVD supplies, even though you  
have a TV with a 4:3 ratio screen. Black bars  
will appear at the top and bottom of the  
screen.  
Setting Up the Display Options  
1Press the MENU button in the stop mode.  
Press the œ or ƒ button to select DVD, then  
press the OK or ‹¤button.  
4:3 Pan Scan :  
Select this for conventional size TVs when  
you want to see the central portion of the 16:9  
screen. (Extreme left and right side of movie  
picture will be cut off).  
DVD Setup  
SETUP  
DVD  
Language Setup  
Audio Setup  
Display Setup  
VCR  
Parental Setup :  
Divx (R) Registration  
16:9 Wide :  
You can view the full 16:9 picture on your  
widescreen TV.  
PROG  
FUNC  
OK  
RETURN  
MENU  
Black Level  
Adjusts the brightness of the screen (On/Off).  
English - 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NTSC Disc Output  
Create Password  
“NTSC” if the screen only has one NTSC-video  
entrance. If this is not the case, you can choose  
to leave “PAL60” as is.  
Enter Password  
Setting Up the Parental Control  
RETURN  
The Parental Control function works in conjunc-  
tion with DVDs that have been assigned a rating  
which helps you control the types of DVDs that  
your family watches. There are up to 8 rating  
levels on a disc.  
The Re-enter Password menu is displayed to  
confirm the password.  
Create Password  
1Press the MENU button in the stop mode.  
Press the œ or ƒ button to select DVD, then  
press the OK or ‹¤button. Press the œ or ƒ  
button to select Parental Setup.  
Re-enter Password  
DVD Setup  
RETURN  
SETUP  
DVD  
Language Setup  
Audio Setup  
Display Setup  
4Enter your password again.  
VCR  
Parental Setup :  
Divx (R) Registration  
The Use Password is set to Yes and the  
Parental Setup menu is displayed.  
The DVD-VCR is locked ( ).  
PROG  
FUNC  
OK  
RETURN  
MENU  
Parental Setup  
2Press the OK or ‹¤button.  
Use Password  
Rating Level  
: Yes  
: 1  
The Use Password menu is displayed.  
Change Password  
Parental Setup  
Use Password  
: No  
OK  
RETURN  
MENU  
OK  
RETURN  
MENU  
Setting up the Rating Level  
5Press the œ or ƒ button to select Rating  
3Press the OK or ‹¤button again if you want  
to use a password. The Enter Password  
menu is displayed. Enter your password by  
pressing the number buttons.  
Level, then press the OK or button.  
Parental Setup  
Use Password  
Rating Level  
: Yes  
: 1  
Change Password  
OK  
RETURN  
MENU  
34 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DivX(R) Registration  
Rating Level  
Level 8 Adult  
Level 7  
Please use your registration code to register  
this DVD-VCR with the DivX(R) Video On  
Demand service. This will allow you to rent and  
purchase videos using the DivX(R) Video On  
Demand format. To learn more go to  
Level 6  
Level 5  
Level 4  
Level 3  
Level 2  
Level 1 Kids Safe  
OK  
RETURN  
MENU  
1Press the MENU button in the stop mode.  
Press the œ or ƒ button to select DVD.  
The DVD Setup menu is displayed.  
6Press the œ or ƒ button to select the required  
level (e.g. Level 6). Press the OK or button.  
• Discs that contain Level 7 will now not play.  
DVD Setup  
Changing the Password  
SETUP  
DVD  
Language Setup  
Audio Setup  
7Press the œ or ƒ button to select Change  
password.  
Display Setup  
VCR  
Parental Setup :  
DivX(R) Registration  
Parental Setup  
PROG  
FUNC  
Use Password  
Rating Level  
: Yes  
: 1  
OK  
RETURN  
MENU  
Change Password  
2Press the OK or button. Press the œ or ƒ  
button to select DivX(R) Registration.  
DVD Setup  
OK  
RETURN  
MENU  
SETUP  
Language Setup  
Audio Setup  
DVD  
VCR  
8The Enter New Password is displayed. Enter  
Display Setup  
your password by pressing the number buttons.  
Parental Setup :  
DivX(R) Registration  
PROG  
FUNC  
Change Password  
OK  
RETURN  
MENU  
Enter New Password  
3Press the OK or button. A message is dis-  
played.  
DivX(R) Registration  
RETURN  
Your registration code is: XXXXXXXX .  
Please use this code to register this  
player with the DivX(R) Video On Demand  
service. This will allow you to rent and  
purchase videos using the DivX(R) Video  
On Demand format. To learn more go to  
The Re-enter Password is displayed to  
confirm the password.  
Change Password  
RETURN  
MENU  
Re-enter Password  
DivX, DivX Certified,  
and associated logos  
are trademarks of  
RETURN  
DivXNetworks, Inc and  
are used under license.  
9Enter your password again.  
• How to make the DVD menu disappear or  
return to menu screen during set up; Press  
the RETURN or ¦ button.  
• If you have forgotten your password, refer to  
Forgot Password in the Troubleshooting  
Guide.  
English - 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Firmware Upgrade  
How to make an update disc  
Write the downloaded file onto a blank CD-R  
disc, using the following settings.  
Please read the below information before  
update procedure.  
1Download the software update file from the  
Samsung Internet Site  
Support/Download/index. aspx).  
After checking your DVD-VCR Model name  
on the rear, download a file using the Search  
Your Model/Name window.  
1The following events may interrupt the update  
procedure and may result in permanent  
damage to DVD-VCR.  
• Unplugging the power cord.  
• Power outage.  
• Dirt or Scratch in the discs.  
• Open a tray door during processing.  
2Write the file to disc using CD-R driver of your  
computer.  
Software update file name: PC7CA.rom  
Please do not change the file name.  
If you change the file name, DVD-VCR do not  
recognize the update CD-R  
2Playback can only support English Subtitle.  
If you have any question or any problem,  
please feel free to contact your nearest  
SAMSUNG Service Center and agency.  
DivX Feature Table  
• A DivX disc may not be playable as playback  
depends on the file format, the recording  
conditions, the recording method, etc.  
Note  
Recommended Application Program  
- Nero Burning / Easy CD Creator.. etc  
Option  
• A video file that has not been interleaved  
supports only voice or video.  
- Multisession; No Multisession  
- CD close or Finalized CD  
• Check the DivX disc format as this is not an  
error.  
In order to increase Disc Playability, add a dummy  
file (over 100MB) together with the update file in  
CD-R, not CD-RW. (The Dummy File can be used  
any kind of file except jpg, mp3, wma file. Zip file  
format is recommended).  
• Normal operation is only possible when the  
screen size is 720X480 pixels or less.  
• A maximum of 65 characters for the caption  
title of a DivX disc is supported.  
• Unsupported caption content will be  
displayed using asterisks (*).  
DivX can be divided into Video and Audio.  
S
upported CODEC formats  
DivX3, DivX4, DivX5 (GMC 1WP)  
*.avi, *.mpeg  
Supported file format  
s
Supported audio formats  
Supported caption formats  
AC3, MP3, WMA  
* .SMI, * .SRT, * .SUB  
36 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
.
5After update is completed, you have to power  
off the unit and eject the update disc by using  
the OPEN/CLOSE button once the unit turns  
on.  
Update procedure  
1Insert the update CD-R disc with the software  
update. It takes about 30 seconds to load the  
update disc.  
6Firmware update is ended. Turn on your  
2READING appears at the left upper side of  
player and enjoy a DivX movie.  
the screen.  
READING  
Code Ver  
: XXXXXXXXX  
: XXXXXXXXX  
Servo Ver  
Loading  
• In order to check new version like the  
upper, press the INFO button after  
opening a tray.  
3ERASE and WRITE appears in turn at the  
same location for about 40 sec during  
firmware update.  
Note  
The display can be changed depend on its  
version and without any notice.  
ERASE  
RETR 00  
Special Playback Features  
During DVD/VCD/CD playback you can select  
from the following special playback options.  
To resume normal playback, press the ll but-  
ton.  
Still  
4It will be displayed DONE if the update is  
Press the ll button during playback.  
• The picture will still and the audio will mute.  
To resume playback, press the ll button.  
• If the player is left in still mode for 5 minutes, it  
will stop automatically.  
completed successfully.  
DONE  
RETR 00  
Note  
Frame Advance operates only in the forward direc-  
tion.  
English - 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Display Function  
Frame Advance (Step)  
To view the current Title, Chapter/Track, and  
counter position, press the INFO button during  
DVD playback. The display screen can also be  
used to quickly choose a title, chapter/track, or  
playing time.  
While in playback mode, press the F.ADV/STEP  
button on the remote control to advance one  
frame at a time.  
• Audio is muted during frame advance mode.  
• Press the ll button to resume normal play-  
back.  
1 View the Display  
During DVD/VCD/CD playback, press the  
INFO button.  
Skip Forward/Back  
To make the screen disappear, press the  
INFO button again.  
DVD  
While a CD or DVD disc is in play mode, press  
the l¦¦ or ‹‹l button to jump forward and  
backward through disc chapters/tracks.  
• Skip Forward (‹‹l) will jump to the next  
chapter/track.  
• Skip Back (l¦¦) will jump to the beginning of  
the current chapter/track.  
• Press the l¦¦ button again to jump to the  
beginning of the previous chapter/track.  
ENG 5.1CH  
ENG  
Off  
MOVE  
OK  
Search Forward/Back  
VCD  
CD  
While a disc is in play mode, press the ¦¦ or  
‹‹ button to visually search forward/backward  
at 2X - 4X - 8X - 16X - 32X - 128X speed. Press  
the ll button to resume normal speed.  
• VCD/CD : 2X - 4X - 8X - 16X - 32X.  
Off  
Off  
Slow Motion  
MOVE  
OK  
MOVE  
OK  
During playback, press the ll button to still the  
image. Then press the ‹‹ꢀ¤‹‹l button to play  
in slow motion at variable speeds.  
• Each press increases the slow motion speed  
playback to 1/8, 1/4 or 1/2 normal speed.  
• Audio is muted during slow motion playback.  
2Press the œ¤or ƒ button to select the desired  
item.  
3Press the ¦¤or button to make the desired  
setup, then press the OK button.  
You may use the number buttons of the  
remote control to directly access a title,  
chapter or to start the playback from the  
desired time.  
Stop/Resume  
• Press the button once to stop playback.  
To resume the DVD/VCD/CD from the point  
where the disc stopped, press the ll button.  
• Press the button twice to completely stop  
playback. The next time you press the ll  
button, the disc will start over from the begin-  
ning.  
4To make the screen disappear, press the  
INFO button again.  
To access the desired title when  
there is more than one in the disc.  
For example, if there is more than  
one movie on a DVD, each movie  
will be identified. A DVD may  
contain several different titles.  
For example, if a disc contains four  
different movies, each might be con-  
sidered a title.  
Note  
Slow motion operates only in the forward direction.  
Slow motion is not available for CD.  
38 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
. If you are using a 16:9 TV  
Most of DVD discs are recorded in  
chapters so that you can quickly find  
a specific passage.  
Each Title on a DVD is usually divid-  
ed into chapters (similar to tracks on  
an audio CD).  
For 16:9 aspect ratio discs  
- Wide Screen  
Displays the content of the DVD title in  
16:9 aspect ratio.  
- Screen Fit  
The top and bottom portions of the screen  
are cut off. When playing a 2.35:1 aspect  
ratio disc, the black bars at the top and  
bottom of the screen will disappear. The  
picture will look vertically stretched.  
(Depending on a type of disc, the black  
bars may not disappear completely.)  
- Zoom Fit  
Allows playback of the film from a  
desired time.  
Refers to the language of the film  
soundtrack. In the example, the  
soundtrack is played in English  
5.1CH.A DVD disc can have up to  
eight different soundtracks.  
The top, bottom, left and right of the  
screen are cut off and the central portion  
of the screen is enlarged.  
For 4:3 aspect ratio discs  
- Normal Screen  
Displays the content of the DVD title in  
16:9 aspect ratio. The picture will look  
horizontally stretched.  
Refers to the subtitle languages  
available in the disc.  
You will be able to choose the subti-  
tles language or, if you prefer, turn  
them off from the screen.  
- Screen Fit  
The top and bottom portions of the screen  
are cut off and the full screen appears.  
The picture will look vertically stretched.  
- Zoom Fit  
The top, bottom, left and right portions  
of the screen are cut off and the central  
portion of the screen is enlarged.  
A DVD disc can have up to 32  
different subtitles.  
A surround sound effect is generat-  
ed using only two front speakers.  
Note  
When in VCD 2.0 is in Menu Off mode only, this  
function works. You can choose Menu On or Menu  
Off by using the DISC MENU button.  
• The screen zoom mode operates differently  
depending on the screen setting in the initial  
DVD menu.  
To ensure correct operation of the EZ VIEW  
button, you should set the correct aspect  
ratio in the initial setup.  
Adjusting the Aspect Ratio (EZ View)  
This function may be different depending on the  
type of disc.  
If you are using a 16:9 TV  
For 16:9 aspect ratio discs  
- Wide Screen  
Displays the content of the DVD title in  
16:9 aspect ratio.  
To play using aspect ratio (DVD)  
1Press the EZ VIEW button.  
• The screen size changes when the button is  
pressed repeatedly.  
- Screen Fit  
The top and bottom portions of the screen  
are cut off. When playing a 2.35:1 aspect  
ratio disc, the black bars at the top and  
bottom of the screen will disappear. The  
picture will look vertically stretched.  
(Depending on a type of disc, the black  
bars may not disappear completely.)  
- Zoom Fit  
• The screen zoom mode operates differently  
depending on the screen setting in the initial  
DVD menu.  
To ensure correct operation of the EZ VIEW  
button, you should set the correct aspect  
ratio in the initial setup.  
The top, bottom, left and right of the  
screen are cut off and the central portion  
of the screen is enlarged.  
English - 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For 4:3 aspect ratio discs  
- Normal Screen  
2Press the ¦ or button to select the desired  
Displays the content of the DVD title in  
16:9 aspect ratio. The picture will look  
horizontally stretched.  
subtitle language.  
3Press the œ or ƒ button to select On.  
To make the menu bar disappear, press the  
SUBTITLE button again.  
- Screen Fit  
The top and bottom portions of the screen  
are cut off and the full screen appears.  
The picture will look vertically stretched.  
- Zoom Fit  
EN  
G
On  
The top, bottom, left and right portions  
of the screen are cut off and the central  
portion of the screen is enlarged.  
Notes  
If you are using a 4:3 TV  
For 16:9 aspect ratio discs  
The subtitle languages are represented by  
abbreviations.  
- 4:3 Letter Box  
This function depends on what languages are  
encoded on the disc and may not work with all  
DVDs.  
Displays the content of the DVD title in  
16:9 aspect ratio. The black bars will  
appear at the top and bottom of the  
screen.  
A DVD disc can contain up to 32 subtitle languages.  
How to have the same subtitle language come up  
whenever you play a DVD; Refer to “Using the  
Subtitle Language” on page 32.  
- 4:3 Pan Scan  
The left and right portions of the screen  
are cut off an the central portion of the  
16:9 screen is displayed.  
Selecting the Audio Language  
- Screen Fit  
The top and bottom portions of the screen  
are cut off and a full screen appears.  
The picture will look vertically stretched.  
- Zoom Fit  
The top, bottom, left and right portions of  
the screen are cut off and the central  
portion of the screen is enlarged.  
Multiple language/audio setup options, such as  
Dolby Digital 5.1, Dolby Pro Logic or LPCM 2  
Channel audio are available on some DVDs.  
You can use the AUDIO button to quickly view  
and select the options available on a disc.  
1During playback, press the AUDIO button.  
For 4:3 aspect ratio discs  
- Normal Screen  
DVD  
Displays the content of the DVD title in 4:3  
aspect ratio.  
- Screen Fit  
The top and bottom portions of the screen  
are cut off and the full screen appears.  
The picture will look vertically stretched.  
- Zoom Fit  
VCD, CD  
Stereo  
The top, bottom, left and right portions of  
the screen are cut off and the central  
portion of the screen is enlarged.  
• Press the ¦ or button to select stereo,  
Left or Right.  
Selecting the Subtitle Language  
Some DVDs provide subtitles in one or more  
languages. You can use the SUBTITLE button  
to quickly view and change settings.  
2Press the ¦ or button to select the desired  
language or audio setup on the DVD.  
• Languages are represented by abbrevia-  
tions, e.g. ENG for English.  
1During playback, press the SUBTITLE button.  
ENG  
On  
40 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2Press the button, then press the œ or ƒ  
Notes  
This function depends on what languages are  
button to select ZOOM.  
encoded on the disc and may not work with all  
DVDs.  
DVD Function  
Title Menu  
SETUP  
Disc Menu  
A DVD disc can contain up to 32 subtitle  
languages.  
DVD  
VCR  
Info  
Zoom  
Bookmark  
Repeat  
EZ View  
How to have the same audio language come up  
whenever you play a DVD; Refer to “Using the  
Audio Language” on page 32.  
PROG  
FUNC  
OK  
RETURN  
MENU  
Changing the Camera Angle  
3Press the OK or button.  
Press the œ / ƒ or ¦ / button to select  
the part of the screen you want to zoom in on,  
then press the OK button  
Some DVD Movies provide you with various  
camera angle views on the same scene if disc  
contains multiple angles.  
1Press the ANGLE button.  
2Press the ¦ or button to select a camera  
angle you may wish to see.  
• Press the OK button to Zoom in  
2X/4X/2X/Normal in order.  
You can also select Zoom function directly  
using ZOOM button on the remote control.  
Zoom  
Marks  
Up to three Bookmarks can be inserted for a  
given DVD/VCD, allowing you to quickly jump to  
your favorite scene or song.  
1During playback, press the MENU button.  
Press the œ or ƒ button to select FUNC,  
then press the OK or button.  
The Function menu is displayed.  
1During playback, press the MARK button.  
Function  
DVD Function  
VCR Function  
SETUP  
DVD  
VCR  
2Press the ¦ or button to select one of the  
three mark placeholders (- - -).  
PROG  
FUNC  
Keep on playing the DVD up to the scene you  
want to mark, then press the OK button. The  
placeholder (-) is changed to a number (1, 2  
or 3).  
OK  
RETURN  
MENU  
C
L
E
A
R
1
1
You may continue to set up to three marks.  
Press the MARK button again to exit the  
mark menu.  
English - 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cancel Chapter/Title  
Recalling a Maked Scene  
1Press the REPEAT button to open the repeat  
1 During playback, press the MARK button.  
menu.  
2 Press the ¦ or button to select the mark  
2 Press the ¦ or button to selected Off,  
you want to recall.  
then press the OK button.  
DVD  
3 Press the ll button to play the mark.  
Chapter  
Title  
Off  
Clearing Mark  
VCD, CD  
1 During playback, press the MARK button.  
Track  
Disc  
Off  
2 Press the ¦ or button to select the mark  
you want to delete.  
• It is available to press the CLEAR button in  
order to stop repeat play.  
3 Press the CLEAR button to delete the mark.  
• Press the MARK button again to exit the  
mark menu.  
A to B Repeat  
A to B Repeat feature enables you to repeat the  
designated section on a DVD or VCD/CD. To  
activate, mark where to start (A) and where to  
end (B) of the section you want to watch.  
Notes  
Up to three scenes may be marked at a timer.  
When VCD 2.0 is in Menu Off mode only,  
this function works.  
1Press the REPEAT button while in playback  
mode, then press the ¦ or button to select  
Depending on the disc, the mark function may not  
work.  
A-.  
DVD  
Chapter  
Title  
Off  
Repeat Chapter/Title  
VCD, CD  
You can repeat a single chapter or a complete  
title.  
Off Track  
Disc  
1Press the REPEAT button while in playback  
mode to open the repeat menu.  
The current repeat mode is displayed.  
2Press the OK button at the beginning of the  
segment you want to repeat (Point A).  
2Press the ¦ or button to select  
The B is selected.  
DVD  
Chapter/Title. Press the OK button to repeat  
the current chapter/Title.  
DVD  
Chapter  
Title  
Off  
Off  
Chapter  
Title  
VCD, CD  
Off  
Track  
Disc  
VCD, CD  
Off  
Disc  
Track  
3Press the OK button again at the end of the  
segment you want to repeat (Point B).  
The segment will begin repeating in a  
continuous loop.  
• The menu will display Track in place of  
Chapter if you are playing a VCD/CD.  
42 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA Play  
Cancel A-B Repeat  
1Press the REPEAT button to open the repeat  
If you insert an MP3/WMA Disc into  
the DVD-VCR, you can see the folder directory.  
menu.  
MP3/WMA Play Function  
2Press the ¦ or button to selected Off, then  
press the OK button.  
1Press the œ or ƒ button to select the desired  
DVD  
music folder, then press the OK button.  
Chapter  
Title  
Off  
Total : 3/4  
ROOT  
ROOT  
AVI  
JPEG  
MP3  
VCD, CD  
WMA  
Track  
Disc  
Off  
• It is available to press the CLEAR button in  
order to stop repeat play.  
• Up to 7 music folders can be displayed at a  
time. If you have more than 8 folders on a  
disc, press the ƒ¤button to display them.  
Notes  
When in VCD 2.0 mode (MENU ON mode),  
this function does not work.  
2Press the œ or ƒ button again to select a  
music file. Press the OK button to begin play-  
back of a music file.  
Use the DISC MENU button in the VCD 2.0 mode  
to select MENU ON or OFF.  
Selecting the Audio Language  
Total : 1/3  
..  
ROOT  
AVI  
JPEG  
MP3  
Multiple language/audio setup options, such as  
Dolby Digital 5.1, Dolby Pro Logic or LPCM 2  
Channel audio are available on some DVDs.  
You can use the AUDIO button to quickly view  
and select the options available on a disc.  
MP3  
MP3  
MP3  
A
B
C
WMA  
1During playback, press the AUDIO button.  
DVD  
Repeat  
1Press the REPEAT button in play mode to  
hear only music continuously and press it  
once again to release.  
VCD, CD  
Stereo  
Total : 1/3  
..  
ROOT  
AVI  
JPEG  
MP3  
MP3  
MP3  
MP3  
A
B
C
• Press the ¦ or button to select stereo,  
Left or Right.  
WMA  
2Press the ¦ or button to select the desired  
language or audio setup on the DVD.  
• Languages are represented by abbrevia-  
tions, e.g. ENG for English.  
Repeat file  
English - 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-R MP3/WMA discs  
Program & Random Play  
(CD/MP3/WMA)  
When playing CD-R/MP3 or WMA discs,  
please follow all the recommendations for  
CD-R above, plus the comments below:  
Your MP3 or WMA files should be ISO  
9660 or JOLIET format.  
You can listen to songs randomly or in the  
desired sequence.  
ISO 9660 format and Joliet MP3 or WMA  
files are compatible with Microsoft's DOS  
and Windows, and with Apple's Mac. These  
two formats are the most widely used.  
When naming your MP3 or WMA files do  
not exceed 8 characters, and place  
".mp3, .wma" as the file extension.  
General name format of: Title.mp3. or  
Title.wma. When composing your title,  
make sure that you use 8 characters or  
less, have no spaces in the name, and  
avoid the use of special characters  
including: (.,/,\,=,+).  
Program Play  
1Press the MODE button in the stop mode.  
Press the ¦ or button to select PROGRAM.  
Press the OK button.  
PROGRAM  
RANDOM  
Use a decompression transfer rate of at  
least 128Kbps when recording MP3 files.  
Sound quality with MP3 files basically  
depends on the rate of compression  
/decompression you choose. Getting audio  
CD quality sound requires an analog/digital  
sampling rate, that is conversion to MP3  
format, of at least 128Kbps and up to  
160Kbps. However, choosing higher rates,  
like 192Kbps or more, only rarely give  
better sound quality. Conversely, files with  
decompression rates below 128Kbps will  
not be played properly.  
Use a decompression transfer rate of at  
least 64Kbps when recording WMA files.  
Sound quality with WMA files basically  
depends on the rate of compression  
/decompression you choose. Getting audio  
CD quality sound requires an analog/digital  
sampling rate, that is conversion to WMA  
format, of at least 64Kbps and up to  
RETURN  
OK  
2Press the œ/ƒ,¦/buttons to select the first  
track to add to the program. Press the OK  
button. The selection numbers are displayed in  
the Program Order box.  
PROGRAM 01  
Program Order  
MP3  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
RETURN  
CLEAR  
3Press the ll button.  
The disc will be played in programmed order.  
192Kbps. Conversely, files with decompres-  
sion rates below 64Kbps or over 192Kbps  
will not be played properly.  
Do not try recording copyright protected  
MP3 files.  
Cancel Program play  
During playback, press the CLEAR button.  
Certain "securized" files are encrypted and  
code protected to prevent illegal copying.  
These files are of the following types:  
Windows MediaTM (registered trade mark  
of Microsoft Inc) and SDMITM (Registered  
trade mark of The SDMI Foundation). You  
cannot copy such files.  
Random Play  
1Press the MODE button in the stop mode.  
2Press the ¦ or button to select RANDOM.  
Press the OK button.  
The disc will be played in random order.  
Important :  
The above recommendations cannot be  
taken as a guarantee that the DVD-VCR  
will play MP3 recordings, or as an assur-  
ance of sound quality. You should note that  
certain technologies and methods for MP3  
file recording on CD-Rs prevent optimal  
playback of these files on your DVD  
player (degraded sound quality and in some  
cases, inability of the player to read the  
files).  
44 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
If no buttons on the remote control are pressed for  
PROGRAM  
RANDOM  
10 seconds, the menu bar will disappear.  
Press the DISC MENU button on the remote  
control to display the menu bar.  
Album Mode  
Press the ¦ or button to select  
Press the OK button.  
RETURN  
OK  
.
The album mode is displayed.  
..  
ROOT  
AVI  
JPEG  
MP3  
Album  
Photo : 1/215  
MP3  
MP3  
MP3  
A
B
C
WMA  
• Depending on the disc, the Program and  
Random Play functions may not work.  
To resume normal play, press the CLEAR  
button.  
• Press the œ/ƒ,¦/buttons to select the  
required picture, then press the OK button.  
The selected picture is displayed.  
• Press the l¦¦ or ‹‹l button to display the  
previous or next 6 pictures.  
Picture CD Playback  
If you insert a Picture (JPEG) CD Disc into the  
DVD-VCR, you can see the folder directory.  
Rotation  
Press the ¦ or button to select  
.
Each time the OK button is pressed, the picture  
rotates 90 degrees clockwise.  
1Press the œ or ƒ button to select the picture  
you want to view, then press the OK button.  
The selected picture is displayed.  
Photo : 1/215  
OK  
RETURN  
Total : 1/215  
ROOT  
ROOT  
JPEG01  
JPEG  
JPEG  
JPEG  
JPEG  
JPEG  
JPEG  
JPEG  
JPEG02  
JPEG03  
JPEG04  
JPEG05  
JPEG06  
JPEG07  
Zoom  
2Press the l¦¦ or ‹‹l button to display the  
Press the ¦ or button to select  
.
previous or next picture.  
Each time the OK button is pressed, the picture  
is enlarged up to 4X.  
Photo : 1/215  
(Normal 2X 4X Normal)  
OK  
RETURN  
Photo : 1/215  
RETURN  
OK  
English - 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slide show  
CD-R JPEG Discs  
• Only files with the “.jpg” and “.JPG” extensions  
can be played.  
Press the ¦ or ‹¤button to select  
.
Press the OK button. The 3 icons are displayed  
for time interval.  
• If the disc is not closed, it will take longer to  
start playing and not all of the recorded files  
may be played.  
Photo : 1/215  
RETURN  
OK  
• Only CD-R discs with JPEG files in ISO 9660  
or Joliet format can be played.  
• The name of the JPEG file may not be longer  
than 8 characters and should contain no blank  
spaces or special characters (. / = +).  
• Only a consecutively written multisession disc  
can be played. If there is a blank segment in  
the multisession disc, the disc can be played  
only up to the blank segment.  
Timer :  
OK  
RETURN  
• When playing a Kodak Picture CD, only the  
JPEG files in the pictures folder can be  
played.  
• Picture discs other than Kodak Picture CD  
may take longer to start playing or may not  
play at all.  
Press the ¦ or button to select one of these.  
Press the OK button.  
The pictures change automatically with  
about an 6 second interval.  
The pictures change automatically with  
about an 12 second interval.  
The pictures change automatically with  
about an 18 second interval.  
• Depending on the file size, each interval  
between images may take longer or shorter  
than the manual suggests.  
46 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DivX/MPEG4 Playback  
DivX/MPEG4 Special Playback  
Features  
1When the disc is inserted, the file structure of  
the disc will be shown. Depending on the file  
format, a different icon will appear next to  
During DivX/MPEG4 playback you can select  
from the following special playback options.  
each file. The  
highlighted.  
Use œ or ƒ button to select the movie file,  
and then press OK or ll.  
and  
files will have been  
1Still  
Press the ll button on the remote control  
during playback.  
Result : When the 'Reading Index......'  
message is displayed, wait for a  
second or two. The movie will be  
played back.  
• The picture will still and the audio will mute.  
To resume playback, press the ll button.  
• If the player is left in Still mode for 5  
minutes, it will stop automatically.  
2Frame Advance (Step)  
DivX  
DivX  
DivX  
While in playback mode, press the  
F.ADV/STEP button on the remote control to  
advance one frame at a time.  
• Audio is muted during Frame Advance mode.  
• Press ll to resume normal playback.  
3Slow Motion  
If the "Cannot support" message is  
displayed, the selected file cannot  
be played back.  
During playback, press the ll button to Still  
the image. Then use the Search ‹‹ to play in  
slow motion at variable speeds.  
• Each press increases the slow motion  
speed playback to 1/8, 1/4 or 1/2 normal  
speed.  
• Audio is muted during slow motion playback.  
• The Search function may not operate  
depending on the condition of the disc.  
2To navigate to a specific time while viewing  
the movie, press the INFO button.  
The file format of the current file (  
or  
)
and time information will be displayed.  
DivX  
4Stop/Resume  
1/1  
• Press the button once to stop playback. To  
resume the DivX/MPEG4 from the point  
where the disc stopped, press the ll but-  
ton.  
~
5Search Forward/Backward  
• During play press the SEARCH button and  
press again to search at faster speed (2x, 4x,  
8x).  
3Use the number buttons on the remote control  
to enter the time to jump to that time in the  
movie.  
Note  
Frame advance and slow motion operate only in the  
forward direction.  
English - 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6Zoom  
During play, press the MENU button on the  
remote control. Then press the œ or ƒ button  
to select the FUNC , then press the OK or ‹  
button. The Function menu is displayed.  
Function  
DVD Function  
VCR Function  
SETUP  
DVD  
VCR  
PROG  
FUNC  
OK  
RETURN  
MENU  
• Press the œ or ƒ button to select DVD  
Function. Press the OK or button.  
• Press the œ or ƒ button to select ZOOM,  
then press the OK button.  
DVD Function  
Title Menu  
SETUP  
Disc Menu  
DVD  
VCR  
Info  
Zoom  
Bookmark  
Repeat  
EZ View  
PROG  
FUNC  
OK  
RETURN  
MENU  
• Press the œ/ƒ or ¦¤/ button to select the  
part of the screen you want to zoom in on,  
then press the OK button.  
The screen will be enlarged to twice the  
normal size.  
Auto Scaling : CIF(100kbps)~D1(784kbps)  
resolution. If the file resolution  
is times automatically. So you  
can see the more larger screen.  
48 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Specifications  
Rated voltage  
Power consumption  
Weight  
AC 220 - 240V, 50Hz  
19Watts  
3.9Kg  
General  
Size  
430mm X 282mm X 82mm  
+5°C ~ +40°C  
Operating ambient temperature  
Installation conditions  
Operation position : Horizontal,  
Relative humidity : Below 75%  
RCA jack : 1.0Vp-p (unbalanced) 75Ω  
RCA jack : -8dBm, 47Kohm unbalanced  
RCA Jack  
Video input (Rear)  
Audio input (Rear)  
Input (Front)  
Input  
RF out  
UHF 21-69 (Initial CH36) : New Zealand model  
UHF 28-69 (Initial CH38) : Australia model  
RCA jack  
Output  
Audio (DVD, VCR)  
Audio (DVD only)  
Video (DVD, VCR)  
Digital audio out (COAXIAL, OPTICAL)  
RCA jack  
Video (DVD only)  
Tape format  
S-Video out, Component out : RCA jack  
VHS type video tape  
PAL,MESECAM,NTSC4.43, NTSC playback on PAL TV  
B/G,D/K : New Zealand model  
Colour system  
VCR Tuning system  
B/B  
: Australia model  
Video S/N  
Above 43dB (standard recording)  
Above 240 lines (standard recording)  
Above 68dB (Hi-Fi), 39dB (Mono)  
20Hz - 20KHz (Hi-Fi)  
DVD, VCD, CD,  
Resolution  
Audio S/N  
Audio frequency characteristics  
Disc  
DVD  
Audio S/N  
100dB  
Audio dynamic range  
95dB  
English - 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide (VCR)  
Before contacting the Samsung after-sales service, perform the following simple checks.  
If you are unable to solve the problem after reading the below instructions, note:  
The model and serial number on the rear of your DVD-VCR.  
The warranty information.  
A clear description of the problem.  
Then contact your nearest SAMSUNG after-sales service.  
Problem  
Solution  
No power  
Check that the power plug is connected to a wall outlet.  
Have you pressed the STANDBY/ON button?  
You cannot insert a video cassette  
A video cassette can only be inserted with the window  
side up and the safety tab facing you.  
The television programme  
was not recorded  
Check the DVD-VCR aerial connections.  
Is the DVD-VCR tuner properly set?  
Check if the safety tab is intact on the cassette.  
Timer recording was unsuccessful  
Was the STANDBY/ON button pressed to activate the timer?  
Re-check the recording start/stop time settings.  
If there was a power failure or interruption during timer  
recording, the recording will have been cancelled.  
You cannot see normal broadcasts  
Noise bars or streaks on playback  
Check the tuner or external setting. It should be on tuner.  
Check the TV or VCR aerial connections.  
Press the TRK (  
œ
or  
ƒ
)
buttons to minimize this effect.  
When the  
button is pressed  
II  
A still picture may have “noise bars”, depending on the  
condition of the tape. Press the TRK ( or buttons  
during slow motion to minimize this effect.  
during playback, the still picture  
has severe “noise bars” streaks  
œ
ƒ)  
Video Head Cleaning  
If poor pictures appear on a variety of cassettes, the video  
heads may need cleaning. This is not a common problem  
and unless it appears, the heads should not be cleaned.  
When cleaning the video heads, read all instructions  
provided with the head cleaning cassette. Incorrect head  
cleaning can permanently damage the video heads  
If when tuning in your TV to the  
1. Remove the aerial input plug the socket marked (Aerial symbol)  
on the rear of the DVD-VCR.  
2. Carry out the instructions “Tuning Your Television for the DVD-  
VCR” (See page 14).  
3. Carry out the instructions “Setting the VCR output Channel”  
(See page 19), move the channel number several channels  
down from the original setting. (Example: from 60 to 69).  
4. Replace the aerial plug into the socket marked (Aerial symbol)  
on the rear of the DVD-VCR.  
DVD-VCR, TV does not find the Screen  
or the pattern when found suffers from  
interference, it may be due to the DVD-VCR  
output channel clashing with the normal  
TV transmissions in your area.  
To prevent this you will need to change the  
DVD-VCR output channel in the following way.  
5. Re-tune your TV to the DVD-VCR again by following instructions  
“Tuning Your Television for the DVD-VCR” (See page 14).  
6. If the problem still exists repeat steps 1 to 5 moving several  
more channels away from the original setting.  
50 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide (DVD)  
Solution  
Problem  
Page  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the DVD.  
This DVD-VCR cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD.  
Disc does not play.  
P3  
5.1 channel sound is reproduced only when the following conditions are met.:  
1) The DVD-VCR is connected with the proper amplifier.  
5.1 channel sound is not  
being reproduced.  
P11  
P 32~33  
2) The disc is recorded with 5.1 channel sound.  
Check whether the disc being played has the “5.1 ch” mark on the outside.  
Check if your audio system is connected and working properly.  
The features or action cannot be completed at this time because:  
1. The DVD’s software restricts it.  
The  
screen.  
icon appears on  
2. The DVD’s software doesn’t support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. You’ve requested a title or chapter number or search time that is out of  
range.  
P31~46  
P31~35  
Playback mode differs  
from the Setup menu  
selection.  
Some of the functions selected in the Setup menu may not work  
properly if the disc is not encoded with the corresponding function.  
The screen ratio cannot  
be changed.  
The screen ratio is fixed on your DVDs.  
P33  
P32  
Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
No audio.  
Press STANDBY/ON with no disc in the unit. Press the ‹‹ button on the  
front panel for five seconds. Power off and on the DVD-VCR by pressing  
STANDBY/ON button. The parental mode is now unlocked as indicated on the  
display. You can now set your rating level and change your password to a new  
number.  
Forgot password.  
P34~35  
Check the contents of the instruction book that contains the explanations  
regarding the current problem and follow the procedure once again.  
If the problem still cannot be solved, please contact your nearest authorized  
service center.  
If you experience other  
problems.  
English - 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care centre.  
Region  
Country  
Customer Care Center  
1-800-SAMSUNG (7267864)  
01-800-SAMSUNG (7267864)  
1-800-SAMSUNG (7267864)  
0800-333-3733  
Web Site  
CANADA  
North America  
MEXICO  
U.S.A  
ARGENTINE  
0800-124-421  
BRAZIL  
4004-0000  
CHILE  
800-726-7864 (SAMSUNG)  
0-800-507-7267  
COSTA RICA  
ECUADOR  
EL SALVADOR  
GUATEMALA  
JAMAICA  
PANAMA  
PUERTO RICO  
1-800-10-7267  
800-6225  
1-800-299-0013  
Latin America  
1-800-234-7267  
800-7267  
1-800-682-3180  
REP. DOMINICA  
1-800-751-2676  
TRINIDAD & TOBAGO  
1-800-7267-864  
VENEZUELA  
0-800-100-5303  
COLOMBIA  
BELGIUM  
01-8000112112  
02 201 2418  
844 000 844  
Distributor pro Českou republiku :  
Samsung Zrt., česka organizační složka  
Vyskočilova 4, 14000 Praha 4  
38 322 887  
CZECH REPUBLIC  
DENMARK  
FINLAND  
www.samsung.com/fi  
09 693 79 554  
3260 SAMSUNG or  
08 25 08 65 65 (€ 0,15/Min)  
01805 - 121213 (€ 0,14/Min)  
06-80-SAMSUNG (7267864)  
800-SAMSUNG (7267864)  
0032 (0)2 201 24 18  
0900 20 200 88 (€ 0,10/Min)  
231 627 22  
FRANCE  
GERMANY  
HUNGARY  
ITALIA  
Europe  
LUXEMBURG  
NETHERLANDS  
NORWAY  
POLAND  
0 801 801 881  
PORTUGAL  
SLOVAKIA  
SPAIN  
80 8 200 128  
0800-SAMSUNG (726786)  
902 10 11 30  
SWEDEN  
U.K  
Republic of Ireland  
Switzerland  
RUSSIA  
KAZAHSTAN  
UZBEKISTAN  
UKRAINE  
LITHUANIA  
LATVIA  
ESTONIA  
08 585 367 87  
0870 SAMSUNG (7267864)  
0818 717 100  
0800-7267864  
8-800-200-0400  
8-800-080-1188  
8-800-120-0400  
CIS  
8-800-502-0000  
8-800-77777  
800-7267  
800-7267  
AUSTRALIA  
CHINA  
HONG KONG  
1300 362 603  
800-810-5858, 010-6475 1880  
3698 - 4698  
3030 8282  
INDIA  
1800 110011  
INDONESIA  
JAPAN  
MALAYSIA  
PHILIPPINES  
SINGAPORE  
0800-112-8888  
0120-327-527  
Asia Pacific  
1800-88-9999  
1800-10-SAMSUNG (7267864)  
1800-SAMSUNG (7267864)  
1800-29-3232  
THAILAND  
02-689-3232  
TAIWAN  
VIETNAM  
0800-329-999  
1 800 588 889  
SOUTH AFRICA  
0860 7267864 (SAMSUNG)  
800SAMSUNG (7267864)  
8000-4726  
Middle East & Africa  
U.A.E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products,  
please contact the SAMSUNG customer care centre.  
AK68-01289A(01)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QVS Stereo System CEN36M User Guide
RCA Flat Panel Television P42WHD35 User Guide
Regency Indoor Fireplace P48 LP User Guide
Ricoh Printer SP 5200S 5210SF 5210SR User Guide
Roberts Gorden Furnace UHD[X][S][R] 150 User Guide
Roberts Radio Clock Radio CR9987 User Guide
Rubbermaid Outdoor Storage 5L10 User Guide
Samsung Computer Monitor T190, T190G, T200, T200G, T220, T220G User Guide
Samsung Personal Computer DP700A3D A01US User Guide
Samsung Vacuum Cleaner SR8845 User Guide