Real-timme Network
Dynamic 10X
Pan & Tilt
10X PTZ Network Camera SNP-1000A User’s Manual
Thank you for purchasing a SAMSUNG iPOLiS Network Camera.
e this product,
Before attempting to connect or operat
or future use.
please read these instructions carefully and save this manual f
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Preface
A brand that is integrated into Samsung's network products,
stands for convenient world (Polis) made safe
(Police) through Samsung's superior network performance(Internet
protocol). With products' clear digital images
a
transmitted over the internet, real-time monitoring is possible
anywhere with an internet connection. Easy remote control
functions and the use of existing networks minimize installation
costs. With
,
experience
a
world of convenience
connected anytime, anywhere.
Preface
Thanks for purchasing of 10X PTZ Network Camera SNP-1000A.
This is a user instruction manual for a 10X PTZ Network Camera
SNP-1000A that employs Samsung Techwin’s WINNER Ⅲ DSP
system with superior low light capability.
The user who installs and operates the product shall be aware of this
manual and other manuals referenced by this manual before the
installation and operation and use properly.
This manual and the software and hardware explained here are
protected by copyright law.
So the copy, reprint and translation to other languages of a part of or
all contents of this user manual without permission of
SamsungTechwin Co., LTD are not allowed except for the copy for
general use within the scope of copyright law.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Preface..............................................................................i
Contents ...........................................................................1
Note to User .....................................................................5
Product Warranty and Limitations ....................................8
Warning Symbols .............................................................9
Danger..............................................................................9
Caution........................................................................... 11
Ch1. Overview .......................................................................13
1.1. 10X PTZ Network Camera SNP-1000A Introduction.......14
1.2. Features ..................................................................14
Ch2. Section names and functions .....................................17
2.1. Body ........................................................................18
2.2. Rear panel...............................................................18
2.3. Connection to external terminal...............................19
Ch3. Installation and Network Setup...................................21
3.1. Components and Accessories.................................22
3.2. Installation ...............................................................23
3.2.1. Preparation for Cable.............................................23
3.2.2. Cable Connection...................................................24
3.2.3. Installation of SNP-1000A ......................................26
3.2.4. Installing the SNP-1000A on a Ceiling....................27
3.2.5. Installing the SNP-1000A Wall Mount.....................29
3.2.6. Installing the Dome Housing (STH-1000PI)............31
1
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
3.3. Network configuration and connection method .......32
3.3.1. Configuration/connection using Web page .............32
Ch4. How to Use Web Viewer...............................................37
4.1. How to Use Web Viewer..........................................38
4.1.1. Login......................................................................38
4.1.2. Web Viewer screen ................................................39
4.1.3. Area Zoom guide....................................................45
4.2. Using Administration page.......................................49
4.2.1. Initialization Screen after Connecting .....................49
4.2.2. Live ........................................................................50
4.2.3. Basic......................................................................51
4.2.4. Network..................................................................53
4.2.5. User .......................................................................54
4.2.6. Pan/Tilt/Zoom.........................................................57
4.2.7. Motion Detection ....................................................59
4.2.8. Alarm/Sensor .........................................................60
4.2.9. Time.......................................................................63
4.2.10. LOG .....................................................................64
4.2.11. Upgrade ...............................................................65
4.2.12. System Reboot.....................................................66
Ch5. How to Operate Camera...............................................67
5.1. OSD Menu Organization .........................................68
5.2. PTZ Camera User Menu Settings ...........................71
5.2.1. Camera Setting ......................................................71
5.2.2. FOCUS ..................................................................71
5.2.3. White Balance........................................................73
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
5.2.4. Exposure................................................................75
5.2.5. Back Light ..............................................................76
5.2.6. AGC .......................................................................77
5.2.7. SSNR (Samsung Super Noise Reduction) .............77
5.2.8. Day & Night............................................................78
5.2.9. Others....................................................................79
5.3. Sequence Setting....................................................80
5.3.1 Preset .....................................................................80
5.3.2. Swing SEQ.............................................................82
5.3.3. Group SEQ ............................................................83
5.3.4. Tour SEQ ...............................................................83
5.3.5. PTZ Trace ..............................................................84
5.3.6. Auto Run ................................................................85
5.3.7. Power On Resume.................................................86
5.4. P/T Setting...............................................................87
5.4.1. Pan Limit................................................................87
5.4.2. Tilt Limit..................................................................87
5.4.3. Area Setting ...........................................................88
5.4.4. Area Masking .........................................................89
5.4.5. Prop. P/T................................................................89
5.4.6. Digital Flip ..............................................................90
5.4.7. Jog Speed..............................................................90
5.5. OSD Setting ............................................................91
5.5.1. Camera Name........................................................91
5.5.2. Preset Number.......................................................92
5.5.3. Preset Name..........................................................92
5.5.4. Sequence Status....................................................93
3
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
5.5.5. Area Name.............................................................93
5.5.6. PTZ Position ..........................................................94
5.5.7. Language...............................................................94
5.6. Initialization Setting .................................................95
5.7. Status.......................................................................96
Ch6. Troubleshooting ...........................................................97
Appendix A. DDNS Usage...................................................101
Specifications ...............................................................109
Dimension .................................................................... 112
If you refer to the enclosed Quick guide and the
Note
Manual in the CD, you can learn how to use Network
Manager Standard.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Note to User
Note to User
This machine’s electromagnetic waves have been registered as
suitable for business purposes; the retailer and consumer should be
aware of this registration. If in the case of wrongful purchases,
please exchange the product for a home use product.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other
European countries with separate collection
systems)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate this
from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can
take this item for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of
the purchase contract. This product should not be mixed with other
commercial wastes for disposal.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Samsung Techwin cares for the environment at all
product manufacturing stages to preserve the
environment, and is taking a number of steps to
provide customers with more environment-friendly
products.The Eco mark represents Samsung
Techwin s will to create environment-friendly
products, and indicates that the product satisfies
the EU RoHS Directive.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Note to User
Correct disposal of batteries in this product
(Applicable in the European Union and other
European countries with separate battery return
systems.)
This marking on the battery, manual or packaging indicates that the
batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system
7
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Product Warranty and Limitations
The manufacturers of this product do not take any responsibility for
this product; therefore, the manufacturer does not authorize the
third-party, but allows that retailer is responsible.
The product warranty does not extend to cover accidents, negligence,
abuse, or wrongful use for the whole or any part of the product.
Additionally, the manufacturer does not provide warranty for any
additional parts or affiliations.
The warranty is for one year from the purchase date. During the
period, warranty does not extend to malfunction in these areas.
y Malfunction due to user’s negligence
y Dismantlement or replacement by the user
y Connection to alternate power source
y Malfunction due to natural disasters (fire, flood, tsunami, etc.)
y Replacement due to wear and tear
y Instability of network
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Symbols
Warning Symbols
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for
future use.
Danger :
Misuse or wrongful operation of the product may
result in death, injury or bring about other fatal
results. It indicates absolute caution when operating.
Caution :
Misuse or wrongful operation of the product may
result in slight injury or damage to the product. It
indicates caution when operating.
Note :
Indication that the user needs to be aware of certain
matters, or will find matters helpful in operating the
product.
Danger
Before Setup
y Please set up the proper voltage before connecting to power
source.
y Please be sure the power is turned off before setup.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
y There is risk of shock or fire; be sure to avoid setup in places
with high humidity.
y To prevent shocks, please connect the ground wire.
y Do not install the camera on a surface that can not support it.
y Unless the surface is suitable, it could cause falling or other
hazards.
During Use
y When opening the product cover, there is a risk of electric
shock. Only a professional should open the cover.
y Please use only in an environment with standard temperature
and humidity.
y Please do not plug in multiple products to a power source; it is
often the cause of fires.
y Please do not place water or heavy objects on the product; it is
often a cause of malfunction.
y Please do not use in a location with propane gas, gasoline or
other flammable substances to avoid risk of explosion or fire.
y Please do not touch the power plug with wet hands to avoid
electric shock.
y Do not pull on the power plug with too much force; a damaged
plug may cause electric shock or fires.
y Don’t connect the RJ-45 cable to a terminal by constraint.
y Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a
long time, Fire may be caused.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
y Random replacement of built-in battery by other types of
batteries may cause explosion. The battery shall be replaced by
the same battery. The lithium battery incorporated in this
product is not user replaceable. Replacement of the lithium
battery will be done by a trained technician.
For information on its replacement, please contact your service
provider.
y The used batteries shall be disposed carefully because they can
cause environment pollutions.
Disassembly and Cleaning
y There is a risk of malfunction, shock or other dangers. Please
do not disassemble or attempt to fix the product.
y To prevent malfunction or shock, please do not use a wet cloth
or oil-based cleaning product to clean the product exterior.
Clean the exterior of the product with a dry cloth.
Caution
y Do not install under extreme temperature conditions
Use only under temperature conditions between -0°C and
+40°C. Provide good ventilation when using in high
temperature conditions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
y Do not install under unstable lighting conditions.
Severe lighting changes or flickering may hinder normal
camera operation.
y Do not drop the camera or subject it to physical shock.
May cause a product malfunction.
y Never keep the camera face to strong light directly.
May damage the CCD.
y Avoid touching the camera lens.
The lens is the most important component of the camera. Be
careful not to smear it with fingerprints.
y Do not expose the camera to rain or other types of liquids
Wipe dry any liquids. Liquids may contain minerals that are
corrosive to Electronic components.
y Do not expose the camera to radioactivity.
Radioactivity exposure may damage the CCD.
y Do not disassemble the camera.
If you disassemble the product as you please, a Repair Center
doesn’t repair it for free.
y Please check the created network place first, before trying to
connect to a network.
y Please use only the power adapter that is provided with the
product.
y Please check national laws to be sure that using the product for
monitoring purposes is not illegal.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch1. Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
1.1. 10X PTZ Network Camera SNP-1000A Introduction
The SNP-1000A is a high-tech network camera that uses MPEG-4
codec technology to allow high compression rates and clear picture
quality by allowing for high frame rates to be transmitted through
the network.
By using the network, remote connection, monitoring, and control is
possible from any location for simple use; additionally, set-up
requires only a network.
The 10X PTZ Network Camera SNP-1000A utilizes embedded
software solutions (Embedded Web Server, Embedded Streaming
Server, Network Protocol) developed by SamsungTechwin, and
guarantees performance and safety while offering various solutions
through Internet integration.
1.2. Features
€ 10X Zoom Lens with Auto-Focus Function
The 10X zoom lens having Auto-focus function magnifies
the image up to 100 times when used with the digital 10X
zoom function.
€ Variable Auto Surveillances
• Individual Preset Saving Modes
12 camera adjustment functions can be saved independently
in each Preset menu to provide optimum images.
• PTZ Trace
4 patterns which are set up by users can be saved and replayed.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2. Features
• Auto Swing
Pan or Tilt is operated in sequence between 2designated
positions.
• Group Search
Maximum 128 Preset positions are toured in order.
• Tour Search
Maximum 6 Group Search functions are toured in order.
€ Proportional P/T
Even when the Zoom-In function is On for the Pan and Tilt
speed correction function linked to the zoom position, fine
manual operation is possible.functions are toured in order.
€ Day & Night
Day & Night function of ICR (IR Cut-Filter Removal) and
Sens-Up function can achieve optimum images during
day and night.
※ Sens-Up function improves the CCD sensitivity by lengthening
the exposure time using electricity.
※ Day&Night function enables users to select and adjust the colour
and black and white images according to the light level.ions are
toured in order.
€ OSD (On Screen Display)
Items such as Camera ID, Camera Name, Preset Number,
Preset Name, Area Name and Camera Status are
displayed on the monitor. Camera functions can be set up
on the OSD menu screen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
€ 128 Preset Position
A maximum of 128 Preset positions can be set up. This
function enables users to set up the monitoring place any
time.
€ Digital Flip
When you want to monitor the moving object below the
camera, you can execute the Digital Flip. The moving
object can be monitored without screen reverse.
€ Area Masking
For privacy protection, a maximum of 4 areas can be
masked among the surveillance areas preventing them to
be displayed on the screen.
€ High Data Compression Ratio
Its data transfer speed is very fast with high data
compression ratio based on MPEG-4 and it transfers
relatively high frame number at the same network
bandwidth.
€ Area Zoom
This zooming function supports image expansion of
square area by mouse dragging.
Function execution is easy only with mouse operation.
Just one time clicking completes PTZ position adjustment
at Area Zoom mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch2. Section names and functions
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
2.1. Body
2.2. Rear panel
① Power Connector
② Audio Input Connector
③ Audio Output Connector
④ Alarm Input/Output Connector
⑤ Network Connector
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3. Connection to external terminal
2.3. Connection to external terminal
19
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Alarm Connection Terminal
PIN NO.
NAME
Purpose
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
-
Not Used.
Not Used.
Not Used.
Alarm Input 1
Alarm Input 2
GND
-
-
S1
S2
G
+V
NO
NC
CM
DC 12V
Alarm Output(NO)
Alarm Output(NC)
Alarm Output(COM)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch3. Installation and Network Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
3.1. Components and Accessories
„ Accessories
„ Products Sold Separately
The following products are provided separately.
y Accessory Housing
- Wall Type Mount : STB-280PW
- Wall Type Mount : STB-230PW
- Dome Housing : STH-1000PI
ƒ
See pages 26 for product images.
Note
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2. Installation
3.2. Installation
3.2.1. Preparation for Cable
To install and use the SNP-1000A, the following cables should be
used.
y Power Adapter Cable
The cable connected to the power input terminal of SNP-
1000A is shown below with a rated voltage of DC 12V 4A.
y Video Cable
The BNC cable shown below is connected to the video output
terminal and the monitor of SNP-1000A.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
y Lan Network Cable
The cable connected to the network device of SNP-1000A for
Network communication is shown below.
ƒ
ƒ
Video cable and LAN network cable are not
provided in this product’s package.
Note
BNC connection terminal can optionally be used to
connect when the Analog output is necessary.
3.2.2. Cable Connection
1. First, connect one end of the BNC video cable connector to the
Video Output Terminal.
2. Next, connect the other end of the connector to the Video Input
Terminal of the monitor.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2. Installation
3. For the network connection of the SNP-1000A, connect the
LAN Cable as the figure below shows.
4. Then, connect the Power Adapter Cable. Use a driver (-) to
screw one part of the Power Adapter consisting of two lines to
the Power Input Terminal of the camera holder.
5. Connect the Power Adapter’s plug to the Power Outlet.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
3.2.3. Installation of SNP-1000A
„ Precautions for Installation
ƒ
ƒ
ƒ
Check that the installation location can safely bear four times the
weight of the camera and its installation fittings.
When fixing the ceiling installation bracket, use the supplied
installation template and fixing screws.
Take care not to drop the product during installation. Do not allow
anyone to stand below the installation area.
„ Optional Products for Installation
y Wall Mount (STB-280PW)
This housing is used to install
the camera on an indoor wall or
ceiling using an external
conduit.
y Wall Mount(STB-230PW)
This housing is used to install
the camera on an indoor wall.
y Dome Housing (STH-1000PI)
This housing is used to install the camera
in a location that is dusty, or a place
where extra protection for the camera is
required.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2. Installation
3.2.4. Installing the SNP-1000A on a Ceiling
1. Prepare the accessories in the camera box (power adapter,
installation template, audio extension cable, 1 loose-proof screw,
3 installation bracket fixing screws, 2 installation brackets,
installation cover, installation CD) and a tool for making a hole
in the ceiling.
2. Attach the installation template to
the ceiling where you want to
install the camera, make a hole of at
least 65mm in diameter, and 3 holes
for fixing screws according to the
marks on the template, and pull the
external incoming cables out of the
hole.
Precautions before Attaching the Installation
Template
Caution
ƒ
Installation Location: Check that the function
and performance of the camera installed on
the ceiling will not be adversely affected by the
external environment, and that the ceiling can
adequately support the weight of the camera.
ƒ
Installation Direction: Determine the main
direction of the camera in advance and attach
27
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
the template so that the front of the template is
in line with the camera direction.
ƒ
Caution: Since there is a danger of the product
falling during installation, take care not to allow
anyone to stand below the installation area.
3. Align the arrow on the ceiling
attachment installation bracket
with the front of the template,
fix the bracket by fastening the 3
screws through the holes, and
connect the external incoming
cables (video cable, network
cable and power cord) to the
camera.
4. Assemble the camera, which
should already have been
attached to the product
installation bracket, to the
ceiling attachment installation
bracket, facing forwards, and fix
the camera with the supplied
fixing screw.
5. To complete installation,
rotate the installation
cover along the groove of
the ceiling attachment
bracket, and fix it.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2. Installation
3.2.5. Installing the SNP-1000A Wall Mount
1. Prepare the accessories in the camera box (power adapter, audio
extension cable, 2 installation brackets, 1 loose-proof screw,
installation CD, installation cover) and the wall mount(STB-
280PW or STB-230PW) and 3 installation bracket fixing
screws in the mount packaging box.
2. Fix the wall mount (STB-280PW) with 3
screws to the wall where the camera is to be
installed, as shown in the figure on the right.
Precautions before Attaching the Installation
Template
Caution
ƒ
Precautions before Attaching the Installation
Template
ƒ
Installation Place: Check that the function and
performance of the camera installed on the
wall will not be adversely affected by the
external environment, and that the ceiling can
adequately support the weight of the camera.
ƒ
Installation Direction: Determine the main
direction of the camera in advance and attach
29
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
the template so that the front of the template is
in line with the camera direction.
ƒ
Caution: Since there is a danger of the product
falling during installation, take care not to allow
anyone to stand below the installation area.
3. Fix the wall bracket and the wall surface attachment installation
bracket onto the wall mount (STB-280PW) with the screws
supplied, as shown in the figure on the right, and connect the
external incoming cables (video cable, network cable and
power cord) to the camera.
4. Assemble the camera, which should already have been attached
to the product installation bracket, to the wall attachment
installation bracket, facing forwards, and fix the camera with
the supplied fixing screw.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2. Installation
5. To complete installation, rotate the installation cover along the
groove of the ceiling attachment bracket, and fix it.
3.2.6. Installing the Dome Housing (STH-1000PI)
To install the Dome Housing (STH-1000PI), fix it instead of
installing the cover in the last step “3.2.4. Installing the SNP-1000A
on a Ceiling” on page 27 and “3.2.5. Installing the SNP-1000A Wall
Mount” on page 29.
ƒ
When the Dome Housing is
installed on the ceiling
ƒ
When the Dome Housing is
installed on the wall
31
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
3.3. Network configuration and connection method
3.3.1. Configuration/connection using Web page
Use when there is one 10X PTZ Network Camera SNP-1000A to be
installed.
1. Please connect user’s PC to 10X PTZ Network Camera SNP-
1000A using cross cable.
2. To configure network, the internal IP must be registered in the
user’s PC.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3. Network configuration and connection method
3. After pressing internet protocol (TCP/IP) properties, press the
‘advanced’ button to go into advanced configurations.
4. The IP address of IP setting tap can be added as
"192.168.1.XXX"
"XXX" is an IP address voluntarily set by a customer.
5. Please launch a Web browser on user’s PC and enter
[192.168.1.100] in the URL address field and push <Enter>
button. Connect to Webviewer login window of 10X PTZ
Network Camera SNP-1000A.
6. Please login with administrator’s authorization and move to
‘Setup-Network’ page.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Default value is ID : admin, PW : 11111111
Note
7. Please configure according to the network environment where
10X PTZ Network Camera SNP-1000A will be installed and
push <Save> button to save the configuration.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3. Network configuration and connection method
① LAN / xDSL/ DHCP Configuration
Item
LAN Use
Description
When network product is connected to normal
local LAN or when connected to static IP, the
network data to be allotted to the IP is configured.
When using xDSL dynamic IP, enter the ID and
PW.
xDSL
When automatically receiving IP through DHCP
server, the DHCP functions are activated.
‘DHCP’ is used in the LAN environment where the
DHCP is activated. Generally, for mid/large scale,
DHCP servers are operated through LAN and for
small-scales, IP sharers use DHCP functions.
Video Quality
② Port Configuration
Item
Description
The connection port and http, ftp port
configurations can be set here and the DDNS use
can be checked.
Port Setting
35
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Use SWR changes its IP address every time the user
attempts to connect to the ISP and when the product
is connected to a cable modem or xDSL modem. In
this case, the user cannot know the changed IP
address. When a product that uses dynamic IP is
registered on the DDNS server, when wishing to
connect to the product, the changed IP address can
be easily recognized. In order to register the IP
address to the DDNS server, set Use SWR as
Enabled.
Note
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch4. How to Use Web Viewer
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
4.1. How to Use Web Viewer
4.1.1. Login
To connect to the login page, click the ‘move to Webpage’ button on
Network Manager or enter network camera IP address on the
internet web browser and press the enter key.
Enter user ID and password and push <Login> button, it then moves
to the appropriate Web page.
Default value is ID: admin, PW: 11111111
Note
If you click <Guest> button, it moves to WebViewer page under the
Guest authenticated status. However, administrator has to permit
guest access for this.
If you logged in first in administrator mode, please
change the password of administrator. It can
prevent other users from connecting to the
administration page.
Note
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
4.1.2. Web Viewer screen
Web Viewer screen is composed of menu area for camera/video
configuration and screen area for displaying input video from
camera.
„ Controls
Flip Image
Vertical reversal of channel screen
39
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Stretch Image
When selecting resolution with Half D1 and CIF, stretches
channel screen to resolution D1 size.
Save Image
Saves channel screen to ‘JPEG file’.
Quad
Converts to 4 split screens (applied only to 4 channel server).
Compression
Video compression mode (the mode of
compressing video)
- MPEG, JPEG
Resolution
Video resolution (the size of video screen
transmitted)
- NTSC : D1(704x480), Half D1(704x240),
CIF(352x240)
- PAL : D1(704x576), Half D1(704x288),
CIF(352x288)
Frame Rate
The number of maximum video frame
transmitted for each second.
- 1, 5, 10, 15, 20, 25, 30
Quality
Quality Configures video quality
- Very High, High, Normal, Low, Very Low
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
Pause
OSD
Stops video for a while.
Displays related information.
Displays the title
Removes the title
41
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Deinterlace
On/off function of Deinterlace.
Screen where
Deinterlace is not
applied
Screen where
Deinterlace is not
applied
Deinterlace is a function to adjust the video quality
softly by eliminating the border line which was made
by an interlace function. The interlace function draws
an even line and an odd line of the Image one after
the other.
Note
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
Camera Setup
Displays OSD control button of camera.
Camera OSD
control button is
displayed
Camera OSD is
displayed
Day&Night configuration function
(Color, B/W configuration)
Day&Night
PTZ Control
PTZ control function
Screen where
camera PTZ
control window is
displayed
43
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
ƒ
ƒ
The left/right slide bar can control focus (left slide
bar) / zoom (right slide bar)
Note
The “+” displayed in the middle can be pressed
using the mouse as the base point of the Pan / Tilt
and it will Pan /Tilt according to that point.
Instruction for Camera OSD control button
<↑>, <↓> button
Moves selection displaying arrows up and down on
camera OSD menu.
<←>, <→> button
Changes configuration of selected field on camera OSD
menu.
<Set> button
Displays camera OSD or moves to upper/lower menu of
selected field.
<Exit> button
Terminates camera OSD.
※ For configuring the function and detail operating method of 10X
PTZ Network Camera SNP-1000A, refer ‘Ch5. How to Operate
Camera’.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
4.1.3. Area Zoom guide
Area Zoom function supports easy and fast PTZ (Pan/Tilt/Zoom)
control for the selected image area on the monitor.
Screen image of menu popped up by clicking mouse right button
ƒ
Clicking mouse right button delivers menu of Area Zoom function.
Screen image of Area Zoom pointer appeared by Area Zoom selection
ƒ
Clicking Area Zoom menu delivers Area Zoom mode showing yellow colored
Area Zoom pointer at the center of monitor.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Screen image of new PTZ position moved by one time click.
ƒ
Clicking mouse left button only controls PTZ position at Area Zoom mode.
Screen image of selected image area in the mouse dragged square
ƒ
Clicking mouse left button and dragging a square shapes selected image area
on the monitor.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1. How to Use Web Viewer
Screen image of expanded area
ƒ
ƒ
Releasing mouse left button stimulates automatic PTZ function mode at the
selected image area.
At automatic PTZ function mode, Area Zoom pointer is enlarged and PTZ
function execution is not available.
Screen image of selected Move PTZ on menu
ƒ
ƒ
At the Move PTZ zone of menu popped up by clicking mouse right button, reset
function to 1x zoom, previous PTZ position, next PTZ position is available.
PTZ operation at Area Zoom mode stores five positions of before and after the
position change and deactivates Move PTZ zone of menu popped up by
clicking mouse right button.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Storage item
Function
Go to 1x Zoom
Previous PTZ
Forward PTZ
Move to 1x Zoom from present PTZ position
Move to previous PTZ position
Move to next PTZ position
48
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2. Using Administration page
4.2.1. Initialization Screen after Connecting
When connection is successful, the below screen will be displayed.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
4.2.2. Live
Please Move to Web Viewer page
[Web Viewer live screen]
50
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.3. Basic
Configures basic information for camera.
Video/Audio Setup
Item
Description
Video compression mode
(Compression mode of video in the camera)
Compression
If the type of installed camera (NTSC/PAL) is
selected, then the size of screen on the
camera becomes selectable.
Video Size
Selects the quality of video screen. In case of
low speed internet, lower the video quality to
see seamless video.
Video Quality
Configures the number of transmitted frame
per second in the camera.
Video FrameRate
51
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Item
Description
Selects the video channel to be used in the
camera.
Video Channel
Selects whether to use the audio input
channel in the camera or not.
Audio-In Channel
Audio-Out Channel
Selects whether to use the audio output in the
camera or not.
Configures the number of users who can be
connected to the camera through the
network(1~20 persons)
Max User Count
Mic. Sensitivity
Audio amplifying function
onfigures Low for the microphone which has
amplifying function and High for the
microphone which has no amplifying function.
(In case of Line-In signal, configure Low)
Product Information
Item
Description
Model
Displays model name of the camera.
Displays MAC Address of the camera.
Mac Address
onfigures name of the camera, it help to classify
several cameras.
Camera Name
Location
The location of the installed camera can be
entered.
Additional description related to the camera can be
entered.
Description
Memo
The contact of camera administrator can be
entered.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.4. Network
Configures network information of the camera.
Network Configuration
According to the user’s network environment, it is classified into
LAN, xDSL, DHCP.
Item
Description
In case the camera is connected to the local
network or xDSL with a static IP address, configure
network information to be assigned to the camera.
LAN
In case of xDSL with a dynamic IP address, enter
password in UserName and Password field.
xDSL
This case is selected in case of using IP sharing
box/ cable modem.
DHCP
53
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Port/DDNS Configuration
Item
Description
This controls communication with camera.
(Default : 4000)
Connection
Port
HTTP Port/
FTP Port
This helps to connect to web page or FTP server.
(Default : http=80, ftp=21)
Select if use of SWR function is available. The way
of connection which used ID does not support.
Use SWR
Select if DDNS server is available. DDNS server is
connected to server without reference to changed
IP because there is possibility that floating IP
constantly is changed.
Use DDNS
※ A detailed explanation about DDNS usage refers to
<Appendix A. DDNS Usage>.
4.2.5. User
This describes password change for administrator or user
registration.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
Item
Description
Administrator
Password Change
Change password of administrator
User clicks ‘Guest’ button to decide whether
allowing guest to connect Main Viewer.
Guest Setup
Current User
You can register new user or delete, and set up
user’s authority.
※ Set up user authority
User’s authorities set up at ‘Current User’ are as follows.
Item
Description
Use video related setup function
(Compression, Resolution, Framerate, Quality)
Video
Control
Audio
Pan, Tilt, Zoom, Audio output, Alarm output
Audio Input
Whether relevant account is used
(If not checked, not allowed log-in)
USE
55
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
ƒ
Example 1) In case control function is limited (Do not check
Controls box)
※ Pan, tilt, zoom, audio output, alarm output function icon is
inactivated
ƒ
Example 2) In case video function is limited (Do not check Video)
※ Compression, Resolution, Framerate, Quality set up icon is
inactivated.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.6. Pan/Tilt/Zoom
Configures PTZ Swing and Preset of the camera.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Item
Description
Select the channel of camera.
Display PTZ menu.
Channel
PTZ Display
OSD Display
PTZ
Display OSD.
Set or delete(delete, delete all) the
Preset. Screen move the position of
Preset.
Camera
Configura
tion
Preset
Surveille Pan/Tilt Swing at the position
of preset, set up the swing menu.
Swing
Surveille repeatedly at the position of
preset, set up the Group menu.
Group
Indicate the first position of surveillant
Preset
First Setup
Second Setup
Indicate the second position of
surveillant Preset
Swing
Setup
Mode
Select Pan/Tilt Mode.
Speed
Set Swing speed between Presets.
Set interval time on Preset.
Set Group Number among 1~6
Set Preset included the Group.
Set swing Speed between preset.
Set interval time on Preset.
Duration
Group No.
Preset No.
Travel Speed
Dwell Time
Group
Setup
58
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.7. Motion Detection
This sets up motion detection function of camera.
Item
Description
Basic grid, used to choose area on the screen, is
displayed or hidden.
Grid Display
When selecting motion detection area, click <Select
All> button to select all areas, or click <Deselect>
button to cancel the selected area.
Select Area
MD Enable
Decide whether you use motion detection function.
Setting up sensitivity to detect motion to adjust input
video by situation. You can select 1-5, and 5 is the
highest.
MD Sensitivity
59
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
4.2.8. Alarm/Sensor
This sets up necessary information when using alarm function by
attaching sensor to camera.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
Alarm/Sensor Setup
◊ Digital In Setup
Item
Description
Types of sensors are ‘Normal open’ and ‘Normal
close.’ This selects up type of connected sensor.
Sensor Type
◊ Digital Out Setup
Item
Description
Set up Alarm Out responding when event is
recognized by connected sensor (Sensor 1) or
Motion Detection (MD)
Alarm
Duration
FTP
Set up time to operate relay. It means the period
from the time when sensor detects event to the
time when relay is released.
In case event occurs by sensor (Sensor 1) or
Motion Detection (MD) on the screen, decide
whether transferring related information to FTP.
In case event occurs by sensor (Sensor 1) or
Motion Detection (MD) on the screen, decide
whether transferring related information by e-mail.
E-mail
E-mail/FTP Setup
Set up FTP server and e-mail information to which related
information is transferred in case alarm occurs.
Item
Description
Mode
FTP
Select media for data transfer.
Enter domain or IP address of FTP
server.
Server Name
Set up home directory to save relevant
data at FTP server.
Home Directory
User ID
Enter ID to connect FTP server.
Enter PW to connect FTP server.
User Password
61
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Item
Description
Recipient E-mail
Address 1
Recipient E-mail
Address 2
You can designate up to two e-mail
address receiving data when alarm
occurs.
In case you use outside e-mail server,
enter the name of the outside e-mail
server.
Server Name
E-mail
ID
Enter ID to connect the outside e-mail
server.
Enter PW to connect the outside e-
mail server.
Password
Mail Subject
Mail Body
Enter the subject of mail to be
transferred.
Enter the body of mail to be
transferred.
If motion is detected, the contents transferred by e-
mail or to FTP are varied according to the set-up of
‘Video Compression’ at Admin page (Basic).
Note
ƒ
MPEG : Video length is set by ‘Duration’ of ‘Digital
Out Setup’.
File extension is ‘ste’, you can play this by ‘SLiM
Player’.
ƒ
JPEG : JPG type image file attached.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.9. Time
Current Time
Item
Date
Description
Current setup date displayed
Current setup time displayed
Time
Time Setup
Item
Description
Set Manually
Time Server
Adjust time manually.
Set up address of time server for Server 1 - 5.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
4.2.10. LOG
Recent activities made for camera are displayed as log.
Item
Description
Lines
View
Clear
Set up number of lines of the list.
Log is viewed with number of lines you set up most
recently.
Delete logs.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Using Administration page
4.2.11. Upgrade
Upgrade program of 10X PTZ Network Camera SNP-1000A.
System Upgrade Configuration.
Item
Description
Upgrade firmware and Web-page of 10X PTZ
Network Camera SNP-1000A.
Firmware/Web
Factory Mode Setup
If you click <Reset> button, server is returned to initial value when
shipped from the factory after confirmation procedure by
administrator.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
4.2.12. System Reboot
System is rebooted after confirmation procedure of administrator.
Click <OK> button to reboot System.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch5. How to Operate Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
5.1. OSD Menu Organization
PTZ camera can be set up on the OSD (On Screen Display) menu
displayed on the video monitor.
① Camera Setting
P1
P2
P3
P4
Defaults
Auto/Manual/
One Shot AF
OneShot
AF
①Focus Mode
Mode: On/Off
Speed: Slow/Fast
ON
Fast
①Focus
②Zoom Tracking
➌Digital Zoom
Off(2X~10X)
ATW/AWC/MANUAL
►ATW
OFF
ATW(O)
-ATW(I): Indoor
-ATW(O): Outdoor
►Manual
➋White
Balance
AWB Mode
-Red
29
-Blue
41
➊Brightness
25
Auto
Manual: Iris Level
---
025
Auto
100
ESC
➋Iris
A.FLK
Manual:
③Exposure
➌Shutter
1/60
X4
1/60~1/120,000,
x2~x128
Auto: Sens-Up Limit
x1~x128
➍Sens-Up
Off
➍Back Light
➎AGC
➏SSNR
High/Middle/Low/Off
High/Normal/Off
High/Middle/Low/Off
Auto
B/W
Color
OFF
Normal
Low
➐Day
Night
&
Burst Level
060
➊Sync
Internal
008
050
Sharpness
Color
⑧Others
➋Image Adj.
➌Freeze
On/Off
OFF
68
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1. OSD Menu Organization
② Sequence Setting
P1
P2
P3
P4
Defaults
①Preset
①Setting ②Edit ③Execute ④Clear ⑤Status
①Pan Swing
②Tilt Swing
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
①Setting ②Execute ③Clear
②Swing
SEQ
③
P&T Swing
①Group1
②Group2
③Group3
④Group4
⑤Group5
⑥Group6
③Group
SEQ
④Tour SEQ
①Setting ②Execute ③Clear
①Trace1
②Trace2
③Trace3
④Trace4
①Replay ②Memorize
⑤PTZ
Trace
①Replay ②Memorize
①Replay ②Memorize
①Replay ②Memorize
➊Off
OFF
➋Preset: Preset No
③Swing: Swing Mode
Pan/Tilt/P&T
➍Group: Group No
➎Tour
①Mode
⑥Auto Run
➏Trace: Trace1~Trace4
⑦A.Pan
- ①Auto Pan Speed: 20~50
- ②Tilt Angle: 10~45
5,10,20,30(Sec), 1,2(Min)
32
25
30sec
OFF
➋Time
⑦Power On
Resume
On/Off
③ P/T Setting
P1
P2
P3
➊Position ➋ON/OFF
P4
Defaults
①Pan Limit
②Tilt Limit
➊Position ➋ON/OFF
①Area1
➊Area Name
➋Position
➌ON/OFF
②Area2
③Area3
③Area Setting
④Area4
①Mask1
②Mask2
➊Position
➋ON/OFF
④Area
Masking
③Mask3
④Mask4
➎Prop.P/T
➏Digital Flip
⑦Jog Speed
ON/OFF
ON/OFF
Manual(10,20,30,40,50,60)
ON
ON
Manual
69
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
④ OSD Setting
P1
P2
P3
P4
Defaults
①Camera Name
➋Preset Number
③Preset Name
➍Sequence Status
➎Area Name
①ON/OFF ②Edit
ON/OFF
①ON/OFF ②Edit
ON/OFF
ON/OFF
ON/OFF
English, 中文,
Francais, Deutsch,
Espanol, Italiano
➊Position
➋ON/OFF
ON
ON
OFF
OFF
English
➏PTZ Position
➐Language
⑤ Initialize
P1
P2
P3
P4
Defaults
①Power On Reset
➋Initial Position
③Factory Default Set
④Camera Default Set
➎Auto Refresh
➊Cancel ➋Execute
➊Position ➋ON/OFF
➊Cancel ➋Execute
➊Cancel ➋Execute
OFF, 1~7Days
OFF
➏ Status
P1
P2
P3
P4
Defaults
Preset setting is only possible within the OSD menu.
Note
Note
Symbol Description
ƒ
When there are sub menus under the selected
OSD menu.
Numbers are displayed in white color like ① on
the right top of the screen.
ƒ
When there is no sub menu under the selected
OSD menu.
Numbers are displayed in black color like ➊ on
the right top of the screen.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. PTZ Camera User Menu Settings
5.2. PTZ Camera User Menu Settings
Execution of OSD Menu : After checking if the camera is in manual
operation mode, press the OSD Menu key. The following commands
are displayed on the monitor screen.
Main Menu
The selection key moves up and
down. Press the execution key
switch on the selected menu to
change the setup menu. Press the
ESC key to exit the OSD Menu.
5.2.1. Camera Setting
Select the Camera Setting on the Main Menu screen to control
camera settings
5.2.2. FOCUS
In Focus menu, you can set up the focus mode among Auto, Manual
or One Shot AF.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
➊Focus Mode
ƒ
Auto : The camera adjusts the focus automatically while
monitoring the screen continuously in the auto mode. In the auto
focusing mode, zoom key operation is not recognized as the
input of the focus key.
ƒ
ƒ
Manual : In the manual mode, users can adjust the camera focus
manually.
One Shot AF : Only when the camera does not move, it turns into
the auto mode. It is the same as the manual mode.
②Zoom Tracking
ƒ
Mode: When you select ON, the Focus function is executed when
the Zoom functionis on. When you select OFF, the Focus function
is not executed even when the Zoom function is on.
ƒ
Speed: Fast will speed up the Zoom. Slow will slow down the
Zoom.
➌Digital Zoom
Magnification of the Digital Zoom can be selected among Off,
2X~10X.
※ It is recommended that the Digital Zoom should be set up before
the preset operation.
ƒ
Digital Zoom
As the digital zoom magnification increases, the
image quality is lowered.
Caution
ƒ
Auto-focus
Auto-focus may not function normally under the
following conditions.
- When the light level in the surveillance area
is low
- When the slow-shutter works
- When the amplification is increased
- When the light level in the surveillance area
is excessively high
72
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. PTZ Camera User Menu Settings
- When the objects in the long and short
distance are under the same surveillance
area
- When there is no contrast (white and black)
in the object (e.g. sky or wall)
- When the thin horizontal line is captured
5.2.3. White Balance
The White Balance function corrects the abnormal white colour into
the normal white colour under any colour temperature lighting.
Select the mode among ATW, AWC and Manual. ATW is selected
by default.
„ WB Mode
ƒ
ATW
Balances the colour automatically depending on the source of
light from 1,800~10,500K colour temperature.
- Indoor[ATW(I)] : Use this mode in the area under the limited
colour temperature.
- Outdoor[ATW(O)] : Use this mode in the area under the broad
colour temperature.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
ƒ
AWC:
Set up the lighting to the objects and corrects the right colour
temperature to that of a white object. Camera works under the
setup conditions. For the most appropriate condition under the
current illumination, capture the white paper and then change the
mode into AWC. Press the Enter key and then AWC Start will be
displayed. When the adjustment is completed after pressing the
Enter key for AWC Start, go to the upper menu. When conditions
change, adjust the white balance function again.
ƒ
Manual
Fine tuning is possible through this manual control mode. Select
the colour temperature and increase or decrease the Red or Blue
values to shift the colour of the object.
- Red : Red Gain can be changed.
- Blue : Blue Gain can be changed.
White Balance may not function properly under the
following conditions.
Note
ƒ
When the colour temperature surrounding the
object is very high. (e.g. clear sky, sunset)
ƒ
ƒ
When it is dark around the object.
When the camera is pointing towards a fluorescent
lamp directly or when lighting conditions change a
lot.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. PTZ Camera User Menu Settings
5.2.4. Exposure
Camera exposure can be controlled.
➊Brightness
The brightness of the screen can be adjusted.
➋Iris
Auto mode or manual mode can be selected.
ƒ
ƒ
Auto: The brightness of the image signal can be adjusted
automatically depending on the amount of light.
Manual: The brightness of the image can be adjusted.
➌Shutter
ƒ
ƒ
ƒ
---: Electronic shutter mode is enabled. The shutter speed is
controlled automatically according to the brightness of the screen.
A.FLK: Use this mode when the screen flickers because of
inconsistent frequency with the surrounding lights.
Manual
- Shutter speed can be controlled manually.
- Shutter speed can be adjusted from 1/60(1/50) second to
1/120,000 second.
- Sens-Up function can be operated manually from x2 ~ x128.
ƒ
If the Shutter mode is ESC in the inner
synchronization mode and the camera faces to the
bright fluorescent lamp directly, the image may be
unstable. Be careful to select the installation
location.
Note
75
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
ƒ
If the Manual or A.FLK mode is selected for the
Shutter menu, the Sens-Up function is disabled.
➍Sens-Up
ƒ
Auto: The low light level of the night or dark condition is detected
automatically and the bright and clear image can be maintained.
- Sens-Up Limit: Maximum accumulated magnification can be
selected.
ƒ
Off: Sens-Up function is cancelled.
As the accumulated magnification increases, the
screen goes bright. But, the after image of the
moving object also becomes larger and the optimum
Auto Focus function may not work.
Note
5.2.5. Back Light
Unlike other cameras, Samsung Techwin’s unique W-III DSP chip
gives you a clear image of the subject even with bright backlight.
ƒ
ƒ
ƒ
ƒ
HIGH : Gain increased from 6dB up to 34dB.
MIDDLE : Gain increased from 6dB up to 30dB.
LOW : Gain increased from 6dB up to 18dB
OFF : BLC function is cancelled.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. PTZ Camera User Menu Settings
5.2.6. AGC
When the brightness of the image taken under dark light is under a
certain level, the AGC (Automatic Gain Control) functions to define
whether to control the Gain automatically or not.
ƒ
ƒ
ƒ
HIGH : Gain increased from 6dB up to 34dB.
NORMAL : Gain increased from 6dB up to 18dB.
OFF : Gain is fixed at 6dB.
5.2.7. SSNR (Samsung Super Noise Reduction)
SSNR function reduces background noise under low light conditions
differently in different modes. The noise reduction effect grows in
Off, Low, Middle and High modes in order.
ƒ
ƒ
ƒ
OFF : No noise reduction effect.
LOW : Noise reduction effect is small but there is little afterimage.
MIDDLE: Noise reduction effect is generally effective in this mode.
Noise can be reduced properly and the afterimage is not strong.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
ƒ
HIGH : Noise reduction effect is excellent but afterimage is also
strong.
When you select the AGC mode as “OFF”, you
Note
cannot use the SSNR function.
5.2.8. Day & Night
The darkness level is detected automatically under low light
conditions such as at night or under dark light to keep the screen
bright and clear.
ƒ
ƒ
COLOR : Output images are displayed in colour all the time.
Burst signal size can be adjusted.
B/W : Output images are displayed in black and white all the time.
Burst signal can be kept or removed.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2. PTZ Camera User Menu Settings
ƒ
AUTO : Under day condition, the mode is automatically changed
into the COLOR mode to keep an optimum colour. At night, the
mode is automatically changed into the B/W mode to distinguish
dark images clearly.
ƒ
ƒ
If the AGC is in OFF mode, the Auto mode cannot
be used. Only COLOUR or B/W mode can be used.
Note
If the sunlight or halogen lamp is used in B/W mode,
the focus may be blurred compared with the general
illumination.
5.2.9. Others
①Sync
Internal Sync is selected by default.
ƒ
Internal : Internal synchronization
➋Image Adj.
Clarity of the video signal and saturation of the color may be
adjusted.
ƒ
ƒ
Sharpness : The overall sharpness of the image can be adjusted.
Color : The overall colour density of the image can be adjusted.
➌Freeze
Moving image can be stopped and replayed.
ƒ
ƒ
ON : Image can be frozen.
OFF : Frozen image is released and the film is replayed.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
5.3. Sequence Setting
Sequence Setting Menu
5.3.1 Preset
12 items such as Pan/Tilt location, Zoom and Focus are selected
among camera functions and they can be called for monitoring.
Total 128 points can be preset.
ƒ
Setting : Select the Preset number for setup. Adjust
Pan/Tilt/Zoom and press the Enter key to save the setting. If you
want to change the 12 items such as Focus, Brightness, Iris and
Scene Adj., use the Up/Down key to go to and select the item. If
you don’t want to change the 12 items, press the ESC key to go
to the next Preset step.
ƒ
Edit : You can edit the 12 preset items such as Pan/Tilt location,
Zoom and Focus, which are selected among camera functions.
ƒ
ƒ
ƒ
Execute : Select the Preset number for execution.
Clear : Select the Preset number to delete for clearing.
Status : The current Preset number setup is displayed.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3. Sequence Setting
„ Preset Menu Setting
1. Select the Preset item on the Sequence Setting Menu
2. Select the Setting item.
3. Select the Preset number.
4. Set up the Zoom and Focus.
5. To change the camera settings, select Edit from the upper menu
first. Select the item to change, and then make the necessary
adjustments.
6. If you select the Scene Adj. item, such items as Shutter, AGC,
SSNR, Sens-Up, White Balance can be set up differently in
every Preset item.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
In the White Balance setting of the individual Preset
Scene Adj., the AWC selection is not available.
Note
5.3.2. Swing SEQ
Swing surveillance can be executed and set up and the data can be
deleted.
ƒ
ƒ
ƒ
Pan Swing : Swing surveillance for the Pan direction is executed
and set up. Data is deleted.
Tilt Swing : Swing surveillance for the Tilt direction is executed
and set up. Data is deleted.
P&T Swing : Swing surveillance both for the Pan and the Tilt
directions are executed and set up simultaneously. Data is
deleted.
- Setting : The Preset Position for Swing function is selected by
clicking the mouse and confirmed with the Execution key. SPD
82
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3. Sequence Setting
is the moving speed (01-64step). DWL is the stop time (00-
120sec). Press the Execution key in the location with selection
mark to finish the setting process.
- Execute : Swing surveillance is executed. Stop key designates
this function.
- Clear : Data in the Swing function is deleted.
5.3.3. Group SEQ
Group SEQ: Sequence surveillance can be executed and set up and
data can be deleted. Up to 6 groups can be registered.
ƒ
Setting : Preset position for swing is selected by clicking the
mouse and confirmed with the Execution key. SPD is the moving
speed (01~64 step). DWL is the stop time (00~120sec). Press
the Execution key in the location with selection mark to finish the
setting process.
ƒ
ƒ
Execute : Swing surveillance can be executed. Stop key will stop
this function.
Clear : Swing data can be deleted.
5.3.4. Tour SEQ
Group surveillance can be executed and set up and data can be
deleted.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
ƒ
Setting : The registered Group Sequence is selected by clicking
the mouse and confirmed with the Execution key. If the selected
number is not registered, it cannot be input. Press the Execution
key in the location with selection mark to finish the setting
process.
ƒ
ƒ
Execute : Group surveillance is executed.
Clear : Group surveillance data are deleted.
5.3.5. PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan, Tilt,
Zoom and Focus) are memorized and replayed.
ƒ
Replay : The manual operation paths are repeated and replayed.
Stop key will stop the replay.
If the operation range is limited using ①Pan Limit
and ②Tilt Limit, please note that other operations
Note
84
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3. Sequence Setting
ƒ
Memorize: Manual operations for minimum 120 seconds after
executing this function are memorized into the internal memory.
Nevertheless, the memorizing time becomes different depending
on the PTZ operation. OVER mark will finish this function.
If the operation range is limited using ①Pan Limit
and ②Tilt Limit, only the operations within the limited
range are memorized.
Note
Press the OSD key to stop the internal memory to
continue saving.
Note
5.3.6. Auto Run
If there is no controller operation by the user for a certain time, the
sequence operation designated by the user will be executed.
ƒ
Mode:
- OFF : Auto Run will be cancelled.
- Preset : Auto Run in the corresponding Preset number
- Swing : Auto Run in the corresponding Swing mode
- Group : Auto Run in the corresponding Group number
- Tour : Auto Run in the corresponding Tour number
- Trace : Auto Run in the corresponding Trace number
- A. Pan : 350° Auto Run in Pan direction
※ Auto Pan Speed: Pan operation in the speed designated by
the user.
※ Tilt Angle: The tilt angle set up by the user is kept.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
ƒ
Time : Auto Run operation is executed after a certain time
designated by the user.(Time can be set up by the unit of 5, 10,
20, 30 sec and 1~5 min.)
5.3.7. Power On Resume
When the power supply for the camera is stopped for some reason,
such as electricity failure, and resumed, the Sequence Settings
before the power off are restored.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4. P/T Setting
5.4. P/T Setting
5.4.1. Pan Limit
The moving range in the Pan direction can be limited.
ƒ
ƒ
Position : Moving range can be set up. Set the position from the
left using the Execution key. The stop position may change due
to the initialization by such operation as power resumption
depending on position setting. This does not mean it is out of
order.
On/Off : When this function is on, the limit is effective. Default
setting is Off.
5.4.2. Tilt Limit
Moving range in the tilt direction can be limited.
ƒ
Position : Moving range can be set up. Set the position from the
top direction using the Execution key. The stop position may
change due to initialization by such operation as power
87
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
resumption depending on position setting. This does not mean it
is out of order.
ƒ
On/Off : The application of limitation will be determined. Default
setting is Off.
5.4.3. Area Setting
Areas can be indicated. Areas can be designated up to 4.
ƒ
Area Name : Area name can be set up. Use the Execution key to
enter the area name. A maximum of 12 letters (English, Chinese,
numbers) can be entered. When you finish inputting the name,
adjust the position mark to ”SET” and press the Execution key.
This is the end of Area Name setting.
ƒ
ƒ
Area Position : Area range can be designated. Use the Execution
key to determine the position from the left. If the area range is
overlapped, the smaller area number will indicate the overlapping
part.
On/Off : It can be determined whether or not to activate the area
mark. The activation becomes effective as soon as the position
moves from the current area to other areas. Set up the OSD
Setting as ON. If it is in OFF mode, this function does not work.
Default setting is OFF.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4. P/T Setting
5.4.4. Area Masking
If you want to exclude some areas for surveillance, they can be
turned into black. You can mask 4 parts of one screen.
ƒ
ƒ
Position : Use the Execution key to determine the position for
screen operation from the left.
On/Off : Operation of screen area masking can be determined.
Default setting is OFF.
If Area Masking is set while the Camera is in the
Digital Flip posion, automatically the Camera moves
the initial position which is not set for the Digital Flip
and then Area Masking position can be set. This is
not a malfunction.
Note
5.4.5. Prop. P/T
Pan and Tilt speeds can be changed depending on zoom
magnification. Tele will slow down the speed of Pan/Tilt and Wide
will increase the Pan/Tilt speed. It will take about 20 seconds for 1
cycle in Tele mode and about 3 seconds in the Wide mode. Default
setting is ON.ed. Default setting is OFF.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
5.4.6. Digital Flip
When you operate the Tilt up to 100° limit and keep it for a certain
time, the image gets reversed automatically and the opposite Tilt
area is seen. When you want to monitor the moving object under the
camera, execute the Digital Flip function. You can observe the
moving object without reversing of the screen.
5.4.7. Jog Speed
Because using Pan/Tilt command protocol is fixed speed type ,so
that occation that Pan/Tilt speed is slow, can adjust command rate
by enter manual mode.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5. OSD Setting
5.5. OSD Setting
5.5.1. Camera Name
Camera name is set up.
If you want to edit the item, move the cursor. Then
select the character.
Note
y Edit : A maximum of 12 characters consisting of English (or
Chinese, Japanese), numbers and special characters can be
input for Camera Name.
y On/Off : The operation of this function is preset. Default setting is
On.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
5.5.2. Preset Number
Preset numbering is set up. (Default setting is ON.)
5.5.3. Preset Name
ƒ
Edit : A maximum of 12 characters consisting of English (or
Chinese), numbers and special characters can be input for
Preset Name.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5. OSD Setting
ƒ
On/Off : The operation of this function is predetermined. Default
setting is On.
5.5.4. Sequence Status
Display of the Sequence Group is set up. (Default setting is ON.)
5.5.5. Area Name
Display of Area Name is set up.
When the Area Name is OFF, the Area Name cannot be displayed.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
5.5.6. PTZ Position
Pan and Tilt position and Zoom magnification are displayed.
PTZ positions are not displayed in the OFF mode. (Only manual
operation can display them.)
5.5.7. Language
The OSD can be displayed either in English (default setting) ,
Chinese, French, German, Italy and Spanish.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
5.6. Initialization Setting
5.6. Initialization Setting
Initialization Menu
①Power On Reset
Camera is initialized into the original status of power input.
➋Initial Position
If you want to set the default direction of the camera so that the
camera faces that direction when the power is turned on, you can set
up the desired Pan and Tilt for the camera.
③Factory Default Settings
Camera is initialized into the factory default settings.
Data including Preset is deleted. This function is used for
initialization all settings.
④Camera Default Settings
If only the camera module is replaced due to camera module failure,
the new camera module can be set up with the settings of the old
camera module.
➎Auto Refresh
The electric circuit and the status of the equipment parts within the
camera are optimized regularly. (The cycle can be set up.) If camera
faces toward a certain source of light or if the settings cannot be
kept because of the long time rotation filming of a certain area, the
Auto Refresh function is used to maintain and reset the existing
95
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
camera settings. Default setting is OFF.
ƒ
OFF, 1-7 Days : This function is disabled in the OFF mode. 1-7
Days enables the Auto Refresh operation in the interval of the
selected days. Auto Refresh takes less than 10 seconds. The
message “Auto Refresh” disappears after finishing the operation.
5.7. Status
The status of PTZ camera setting is displayed.
CAM MODEL= 10NC
Camera Model
CAM VERSION= 4.6
Camera S/W Version
Control Board S/W Version
Protocol Setup
DOME VERSION= 1.00
CON PROTOCOL=SAMSUNG TW
DOME ID= 001
Dome Camera ID
CONTROLLER= Duplex-19200
Communication Mode Setup
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch6. Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
If there are problems in operation, please refer to the items below. If
the problem persists, please contact the agent you purchased this
product from.
Problem
Solution
Nothing appears on the
screen.
ƒ
ƒ
Please check the power connection.
Please check the images after
connecting the video signal line
ƒ
Open MS-DOS window to check
whether 10X PTZ Network Camera
SNP-1000A is connected to network.
※ In case of ping 192.168.1.100,
replace it with IP address set up.
ƒ
Please check if the lens is clean.
Please clean the lens with a clean
cloth or brush.
The video image is not
clear.
ƒ
ƒ
Please adjust the contrast feature of
the monitor.
Please make sure that the screen is
not exposed directly to a bright light.
Please move the camera if necessary.
ƒ
ƒ
Please adjust the contrast feature of
the monitor.
The screen is dark.
If you have an intermediate device, set
the 75Ω/Hi-z properly, and check the
terminals.
ƒ
Please check if an appropriate power
source to the camera complies with
There is a problem with
the camera operation.
The camera surface is
too hot and black
stripes appear on the
screen.
the
manufacturer's
standard
requirement, or if the voltage keeps
changing.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
The MOTION
DETECTION function is
not working.
Solution
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Please check if 'MOTION
DETECTION' mode is turned on.
Please check if the MD LEVEL is too
low.
Please check the setting of the MD
AREA.
Inspect the cables(power or network)
connected to the device.
When camera cannot
be controlled for Pan/
Tilt/ Zoom
Connect to Admin page to check
whether user control is selected.
Please check the 'WHITE BAL'
setting.
Colors are not quite
right.
Please check if the camera is facing
directly into sunlight or fluorescent
light.
The screen is
flickering.
ƒ
ƒ
ƒ
ƒ
Please check if the AGC menu is set
to the OFF position.
DAYNIGHT(Auto) mode
is not working.
Please check if the AGC menu is set
to the OFF position.
SENS-UP function is
not working.
Please check if the SHUTTER menu
is set to MANUAL mode.
Please check the limit of SENS-UP
AUTO mode.
ƒ
ƒ
ƒ
Please check the audio is selected
from admin page.
Audio is not working
Please check speaker volume from
the viewer.
In case input sound through
microphone at Viewer is not outputted
through Audio Out of camera, please
check whether Audio Out channel is
selected at admin page. Or check
whether microphone is available at
Viewer.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Problem
Solution
ƒ
Please check audio driver is working
in user’s PC.
ƒ
Please use the enclosed Audio
Extension Cable to install easily when
connecting the audio cable.
ƒ
ƒ
ƒ
Please check whether network cable
of 10X PTZ Network Camera SNP-
1000A is correctly connected
Video is stopped
In case user uses hub or IP router,
check
whether
these
network
equipments are working properly.
Open MS-DOS window and check
whether 10X PTZ Network Camera
SNP-1000A is connected to network.
ƒ
ƒ
ƒ
ƒ
Click ‘refresh (shortcut; F5) ’ button at
browser to recall the page
No image from web
viewer
Check whether power of camera and
network cable is properly connected.
Check whether computer is connected
to network.
If you use hub or router, check
whether such equipments are properly
operated.
(Note: Open MS-DOS window and
enter network ID of camera at ping
192.168.1.100)
ƒ
ƒ
Connect to Admin page to check
whether video output is selected.
Video may not be viewed since Divx
codec is not installed in user’s PC.
Divx codec can decode video
compressed with MPEG4. Download
and install the latest Divx codec, and
check video.
Image transferred to
FTP or by E-mail
cannot be viewed
http://www.divx.com/divx/download
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. DDNS Usage
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Registration process of DDNS is as following:
€ Step1) Complete the registration form in iPOLiS
website.
The website is ‘www.samsungipolis.com’.
Figure A-1. Website of iPOLiS
102
Download from Www.Somanuals.com. All Manuals Search And Download.
DDNS Usage
Figure A-2. Membership Registration: SIGNUP
Figure A-3. Membership Registration: Input your information.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
€ Step2) Register the equipment after login.
Figure A-4. Login
Figure A-5. The list of registered equipment.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
DDNS Usage
Figure A-6. Product Registration.
(Confirm repetition certainly at domain registration.)
Figure A-7. The list of registered equipment.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
€ Step3) Configure DDNS information in the
equipment.
ƒ
ƒ
Click the part of Network Configuration in website of Network
Camera.
Click “USE DDNS” in order to do “Enable” and input the address
of DDNS Server.
(Default: www.samsungipolis.com )
ƒ
Enter the ID and Password that is written when register product
is in iPOLiS website.
The Configuration of DDNS in SNP-1000A is Completed.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
DDNS Usage
€ Step4) Confirm the connection status of
relevant product in product list of iPOLiS
website.
Figure A-8. The List of Product.
Be able to confirm the information of connected
equipment if click <check> button of ‘Product information’.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Figure A-9. Product information
Move to Login website of relevant product if click <view>
button of ‘ view’.
The buttons which are <Edit> and <Delete> of ‘product
management’ move to relevant page through input
password to item that fertilize or erase information of
registered equipment in List of product.
Only, ‘ID(Domain)’ of product should establishes again as
‘ID(Domain)’ after deleting because it can’t be fertilized.
Figure A-10. Edit/Delete
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
Camera Part
Items
SNP-1000AN
SNP-1000AP
1/4” Color Vertical Double Density Interline CCD.
410,000pixel
Imaging device
TV
NTSC
PAL
Total Number of Pixels
Valid Pixel
811(H) X 508(V)
768(H) X 494(V)
795(H) X 596(V)
752(H) X 582(V)
Horizontal Scan
Frequency
Vertical Scan
Frequency
15.734kHz
59.94Hz
15.625KHz
50Hz
Synchronization
Image Output
Internal Sync
1.0p-p/75Ω
S/N Ratio
Higher than 50dB (AGC OFF)
Horizontal Resolution
520 TV Lines (Color)/570 TV Lines(B/W)
0.7Lux(Color), 0.1Lux(B/W)/(@50IRE),
0.0007Lux (Day & Night is On.)/(@50IRE)
Minimum Light for
Object
Auto/Manual
(1/60 - 1/120,000)
Auto/Manual
(1/50 - 1/120,000)
Electronic Shutter
Sens-Up
ON (x2 - x128 Fields) / OFF
Day & Night
ICR(Filter Switching) ON/OFF
ATW(Indoor/Outdoor Selection)/AWC/
Manual (1,800K - 10,500K)
White Balance
Fixed Shutter Speed
(1/100)
Fixed Shutter Speed
(1/120)
Flickerless Adjustment
Iris
Auto/Manual (Iris Level Adjustment Mode)
Low, Middle, High, Off
Gain Control
OSD Display
Outline Correction
Focal Length
Digital Zoom
ON/OFF
Adjustable Level
F3.8mm(WIDE)~F38.0mm(TELE), 10X Optical Zoom
OFF, 2~10X Selection (Total 100X Zoom)
Wide Angle 1:1.6, Tele 1:2.8
Maximum Aperture
Rate
Coverage Angle
Wide: 51.2°(H) X 39.3°(V) Tele: 5.58°(H) X 4.27°(V)
1.5m(Tele)
Proximity Distance
Horizontal Rotation
Angle
350°
Horizontal Rotation
Manual/Program
109
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Items
SNP-1000AN
SNP-1000AP
Manual: 0.5° ~ 70°/s(64 levels)
Preset: 0.5° ~ 140°/s(64 levels)
Horizontal Rotation
Speed
Horizontal Minimum
Moving Angle
0.02°
Vertical Rotation Angle
Vertical Rotation
-5°~ 185° (Digital Flip)
Manual/Program
Manual: 0.5° ~ 150°/s(64 levels)
Preset: 0.5° ~ 100°/s(64 levels)
Vertical Rotation Speed
Vertical Minimum
Moving Angle
0.02°
Preset Position
Area Masking
Max 128 points
Max 4 locations
2 Alarm Inputs
Alarm
1 Alarm Outputs
(Relay: NC/NO/COM, 2A 30VDC Max)
0°C ~ 40°C
Operating Temperature
Operating Humidity
Power, Voltage
Power Consumption
Dimension
20% ~ 75%(Except for dew condensation)
DC 12V±10%
Operating 8.5Watts below
Ø110 X 134.8mm
Weight
Less than 0.85kg
- Wall Mount Bracket : STB-280PW
- Wall Mount Bracket : STB-230PW
- Dome Housing : STH-1000PI
Option
※ The product design and dimensions may change without
previous notice for improvement of performance.
ƒ
ƒ
The copyright of this manual belongs to Samsung
Techwin Co. Ltd.
Note
Parts or the whole of this manual cannot be
reproduced or transmitted by any electric,
mechanic or audio method without the authorized
written approval of Samsung Techwin.
ƒ
The contents of this manual may be changed for
an improvement of functions.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Network Part
Items
SNP-1000AN
SNP-1000AP
NTSC :
704 x 480(D1), 704 x 240(Half D1), 352 x 240(CIF)
PAL
Output Resolution
:
704 x 576(D1), 704 x 288(Half D1), 352 x 288(CIF)
Output Video Format
Video Compression
Stage
MPEG4 / MJPEG Selectable
5 stages (Very Low, Low, Middle, High, Very High)
Compression
transmission speed
Audio Format
Ethernet
NTSC : MAX 30 frame/sec
PAL : MAX 25 frame/sec
Bi-directional audio, 8KHz ADPCM
10/100Mbps
HTTP, TCP/IP, FTP, SMTP, DHCP, DNS, DDNS, NTP,
PPPOE
Protocol
Dynamic IP
DDNS
Supports XDSL and DHCP
Supports DDNS
Area Zoom
Max. User
Supports Area Zoom function
20 Users
Supply Network Manager Standard Installation
Program
S/W
※ The product design and dimensions may change without
previous notice for improvement of performance.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
10X PTZ Network Camera SNP-1000A
Dimension
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG TECHWIN
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive,
Hillswood Business Park Chertsey, Surrey KT16 OPS
Tel: +44-1932-45-5308 Fax: +44-1932-45-5325
145-3, Sangdaewon-dong, Jungwon-gu,
Seongnam-si, Gyeonggi-do, 462-120, Korea
Tel: +82-31-740-8151~8 Fax: +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS AMERICA, LTD.
1480 Charles Willard St. Carson, CA90746
Tel: +1-310-632-1234 Fax: +1-310-632-2195
www.samsungtechwin.com
www.samsungipolis.com
P/NO : Z6806.0915.01B
Download from Www.Somanuals.com. All Manuals Search And Download.
|