Samsung Projector Accessories SDP 760 User Guide

Digital Presenter  
User Manual  
SDP-760  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview  
imporTAnT SAfeTy inSTruCTionS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings, Install in accordance with the manufacturers instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding type plug has two blades and a third grounding  
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit  
into your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/ accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lighting storms or when unused for long periods of  
time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
English  
_3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview  
wArninG  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO  
RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION  
GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.  
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such  
aCsAvauseTsi,oshnall be placed on the apparatus.  
CAuTion  
riSK of eLeCTriC SHoCK.  
Do noT open  
: TO REDUCE THE RISK OF ELECTRIC SHOCK.  
CAUTION  
DO NOT REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
eXpLAnATion of GrApHiCAL SymBoLS  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to  
alert the user to the presence of “dangerous voltage” within the product’s enclosure  
that may be of sufficient magnitude to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is intended to alert the user to  
the presence of important operating and maintenance (servicing) instructions in the  
literature accompanying the product.  
CAuTion  
These servicing instructions are for use by qualified service personnel only.  
To reduce the risk of electric shock do not perform any servicing other than that contained in the  
operating instructions unless you are qualified to do so.  
4_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This equipment has been tested and found to comply with the limits for a Class A digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference when the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instruction manual, may cause harmful interference to radio  
communications. Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at his own expense.  
English  
_5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview  
ConTenTS  
3
7
8
9
9
Important Safety Instructions  
Product Features  
What's Included  
oveRview  
Product at a Glance  
Front View  
3
10 Rear View  
11 Control Panel  
12 Preparations  
insTallaTion & ConneCTion  
13 Connecting the Output device  
13 Connecting to the monitor  
13 Connecting the TV  
14 Connecting to the PC  
15 Kensington Lock  
12  
16 Getting Started  
16 Image Adjustment  
20 Setting the Output Resolution  
21 Setting Supplemental Functions  
seTuP & aPPliCaTion  
16 Setup  
16  
25 Specifications  
aPPenDix  
27 Menu Settings & Default  
28 Troubleshooting  
25  
6_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
proDuCT feATureS  
Thanks for purchasing the product.  
This product is high quality video presenter which enables simple and easy video display from all sources onto  
a computer monitor and video projector devices.  
3m pixel CmoS imaging Device  
By adopting 1/2.8” 3M pixel CMOS, it implements high-resolution and color reproduction.  
Supports XGA to 1080p (30 frame/sec) video output  
Supports VGA output of 1080p resolution in XGA and C-VIDEO output, any type of video projectors can be  
utilized.  
English  
_7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview  
wHAT'S inCLuDeD  
Check if the main unit and all the following accessories are included in the product package.  
SDP-760  
SAMSUNG DIGITAL PRESENTER  
Main Unit  
Software / User Manual CD  
Power Adapter  
Diffusing Sheet  
VGA Cable  
USB Cable  
Accessories  
RS-232C Cable  
Microscope adapter  
`
RS-232C cables and adapter lenses from other brands may not be compatible with this product.  
J
Samsung Techwin cares for the environment at all product manufacturing stages, and is  
taking measures to provide customers with more environmentally friendly products.  
The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly  
products, and indicates that the product satisfies the EU RoHS Directive.  
8_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
proDuCT AT A GLAnCe  
front view  
Main Pole  
Lens  
LED Lighting  
SDP-760  
SAMSUNG DIGITAL PRESENTER  
E
R
E
S
N
T
A
T L  
I
P R  
D
E
I G  
S U M N S A  
S D P - 7 6 0  
Control Panel  
Rear Panel  
English  
_9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview  
rear view  
RS-232C  
USB  
C-VIDEO  
VGA OUT  
DC 5V IN  
a
b c  
d
e
f
Item  
Description  
Insert the Kensington security cable. For preventing a product theft or the security  
Kensington Lock  
a
purpose, use the Kensington security cable to tie up this product with a fixed object.  
DC 5V IN  
RS-232C  
USB  
Connect the power jack of the DC adapter to this port.  
Connect the RS-232C cable to this port.  
b
c
d
e
Connect this port to a computer that supports USB communications.  
Connect C-VIDEO to the TV for watching the TV.  
C-VIDEO  
Connect this port to a video input device such as PC monitor or projector. Use this port if  
you want to play the video incoming from the presenter on the monitor or projector.  
VGA OUT  
f
10_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control panel  
Description  
Item  
LIVE  
Menu setup mode  
Power On/Off  
When powered, the LED turns to blue.  
Adjust the screen brightness  
Move up or down  
Zoom In/Out  
Move left or right  
Open the menu  
Run the selected menu  
Lighting On/Off  
Press and hold the button to run MASK function.  
Auto Color Adjustment  
Auto Focus  
Press and hold the button to run manual focusing.  
Freeze  
Press and hold the button to rotate the played video by 180°.  
Cancel your work  
Press and hold the button to switch video between VGA USB.  
`
Some buttons marked with </> has multiple functions. Press it briefly to use former function of </>, press and hold it  
for more than 3 seconds to use the latter.  
M
English  
_11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
installation & connection  
prepArATionS  
1. Connect the necessary cables of VGA OUT, C-VIDEO, USB and Power.  
VGA OUT  
USB  
RS-232C  
USB  
C-VIDEO  
VGA OUT  
DC 5V IN  
R
A L P R E S E N T E  
S A M S U N G D I G I T  
S D P - 7 6 0  
C-VIDEO  
2. Press  
of the presenter to turn on the digital presenter.  
12_ installation & connection  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConneCTinG THe ouTpuT DeviCe  
Connecting to the monitor  
To display video on a monitor, the monitor should be connected to the presenter with monitor cable.  
Monitor Cable  
VGA OUT  
RS-232C  
USB  
C-VIDEO  
DC 5V IN  
Digital Presenter  
Monitor, projector, etc  
Connecting the Tv  
To display video on a TV, the TV should be connected to the presenter with C-VIDEO cable.  
Video Cable  
C-VIDEO  
RS-232C  
U
OUT  
DC 5V IN  
Digital Presenter  
TV  
English  
_13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
installation & connection  
Connecting to the pC  
To connect the presenter and PC, use USB or RS-232C cable.  
Using USB cable enables control as well as video transfer, while RS-232C only enables control as  
defined in the protocol.  
Connecting a pC with uSB Cable  
1. Connect the cable to the USB port of the PC.  
2. Connect the USB cable’s the other end to the presenter’s [USB] port.  
USB Cable  
USB  
R
VGA OUT  
DC 5V IN  
Digital Presenter  
PC  
`
It is recommended to connect the USB cable to the USB port on the main board of your PC.  
(Using an extension front port or the bus-power USB hub may cause a problem, depending on the manufacturer.)  
Use only the USB cable of less than 4.0m in length.  
J
`
`
Use the USB cable provided by Samsung Techwin.  
(Using a cable from different manufacturer may cause problem depending on the cable specifications.)  
If using the USB cable for the connection, install the provided USB driver and SDP USB Viewer on your PC.  
For more information, refer to the provided program manual.  
14_ installation & connection  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a pC with rS-232C Cable  
1. Connect the cable to the RS-232C port of the PC.  
2. Connect the RS-232C cable’s the other end to the presenter’s [RS-232C] port.  
RS-232C Cable (Purchased separately)  
RS-232C  
C-VIDEO  
VGA OUT  
DC 5V IN  
Digital Presenter  
PC  
`
`
The RS-232C cable is optional that is not included in the product package. Purchase it if needed.  
However, a third-party RS-232C cable (manufactured by other than Samsung Techwin) may not guarantee a proper  
operation.  
J
M
If using the RS-232C cable, no specific driver is provided. Obtain the necessary programs on your own.  
KenSinGTon LoCK  
Kensington lock is a theft-proof device that you can use to tie up the presenter to a fixed object such as  
showcase using a wire cable.  
RS-232C  
USB  
C-VIDEO  
VGA OUT  
DC 5V IN  
Kensington Lock (Purchased separately)  
Kensington lock is an optional accessory (unbundled). Purchase it for you.  
`
M
English  
_15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup & application  
GeTTinG STArTeD  
1. Press the  
button.  
The power LED turns to blue.  
2. Press the  
button.  
3. The main menu appears.  
preSenTer mAin menu  
IMAGE ADJUSTMENT  
}
}
}
}
OUTPUT MODE  
CONFIGURATION  
SAVE AND EXIT  
SeTup  
image Adjustment  
Setting the white Balance (wB moDe)  
You can adjust the color tones of the image automatically in Live mode.  
1. From the menu, select imAGe ADJuSTmenT wB moDe.  
preSenTer imAGe ADJuSTmenT  
WB MODE  
IMG MODE  
DNR  
ATW (Auto Tracking)  
IMAGE  
ON  
ANTI FLK  
MASK SETUP  
OFF  
}
RETURN  
}
2. Each time you press [►] the white balance mode will switch to in the order of: <ATW(Auto Tracking)  
AWB(KEY) MANUAL WB>.  
Auto color adjustment 1: ATW(Auto Tracking)  
This will perform the white balance function according to the change of the color temperature of a  
light source.  
- Select ATw(Auto Tracking).  
- When done, return to the Live screen.  
16_ setup & application  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto color adjustment 2: AWB(KEY)  
You can adjust the color tones of the displayed video automatically each time you press  
.
- Select AWB(KEY) from the menu and press  
button in LIVE screen to adjust color  
automatically.  
Manual color adjustment: MANUAL WB  
You can adjust the settings of reD GAin and BLue GAin manually before performing the white  
balance.  
- Select mAnuAL wB.  
- Use the [◄►] button to change the settings to your preference.  
- When done, return to the Live screen.  
Compensating images (imG moDe)  
This will optimize the display of the image.  
1. From the menu, select imAGe ADJuSTmenT imG moDe.  
preSenTer imAGe ADJuSTmenT  
WB MODE  
IMG MODE  
DNR  
ATW (Auto Tracking)  
IMAGE  
ON  
OFF  
ANTI FLK  
MASK SETUP  
}
RETURN  
}
2. Each time you press [►], the IMG MODE will switch to <IMAGE CUSTOM TEXT> in this  
sequence.  
TEXT : Optimize the display of a manuscript containing a large volume of text.  
IMAGE : Optimize the display of a photo or picture.  
3. If you select CuSTom, you will see the following sub menu items.  
CuSTom imAGe SeTTinG  
TONE  
VERY LOW  
HIGH  
COLOR  
SHARPNESS  
MIDDLE  
RETURN  
}
TONE : Select a gamma setting of luminance.  
Each time you press [►], the tone setting will switch to <VERY LOW LOW MIDDLE HIGH  
VERY HIGH>.  
English  
_17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup & application  
COLOR : Select a GAIN setting.  
Each time you press [►], the gain of color will switch to <HIGH B/W LOW MIDDLE>.  
SHARPNESS : Set the sharpness of the displayed image.  
Each time you press [►], the sharpness level will switch to <MIDDLE HIGH LOW>.  
`
If you increase the sharpness level, the image may be displayed abnormally or it can cause a noise.  
J
Setting the noise reduction (Dnr)  
DNR stands for Digital Noise Reduction that provides a clear image through 2D/3D filtering.  
1. From the menu, select imAGe ADJuSTmenT Dnr.  
preSenTer imAGe ADJuSTmenT  
WB MODE  
IMG MODE  
DNR  
ATW (Auto Tracking)  
IMAGE  
ON  
OFF  
ANTI FLK  
MASK SETUP  
}
RETURN  
}
2. Press [►] button to set whether to use DNR function.  
`
A faster moving object may cause an afterimage if using DNR function.  
J
Setting the AnTi fLK mode  
You can use this feature if you encounter a flickering screen due to a frequency mismatch with the  
ambient lighting.  
1. From the menu, select imAGe ADJuSTmenT AnTi fLK.  
preSenTer imAGe ADJuSTmenT  
WB MODE  
IMG MODE  
DNR  
ATW (Auto Tracking)  
IMAGE  
ON  
OFF  
ANTI FLK  
MASK SETUP  
}
RETURN  
}
2. Use [+] to specify the use of AnTi fLK.  
18_ setup & application  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the mask  
You can mask a portion or the whole of the screen so that it is hidden.  
1. From the menu, select imAGe ADJuSTmenT mASK SeTup.  
mASK SeTup menu  
BOUNDS  
TONE  
VGA/USB  
LEVEL 4  
WIDTH  
··· ··· ··· ··· 25  
*
HEIGHT  
RETURN  
··· ··· ··· ··· 25  
*
}
2. Select mASK SeTup to display the sub menu items.  
BOUNDS : With BOUNDS, select the display device currently using.  
Press [►] button to select BOUNDS mode in the order of <VGA/USB C-VIDEO>.  
TONE : Select a tone level.  
Each time you press [►], the tone value will switch to <LEVEL 1-2-3-4>. The lower the level is, the  
greater the transparency of the masking area becomes.  
WIDTH : Select a mask width.  
Press [  
] or [  
] button on the control panel to set the area between 1~100.  
HEIGHT : Select a mask height.  
Press [◄  
] or [  
] button on the control panel to set the area between 1~100.  
`
When the mask setting is completed, press the  
right buttons to move the masking area.  
button on the control panel to activate it. Use the left/  
M
`
Note that the mask WIDTH/HEIGHT value is not absolute value but relative and proportional to the width/height of the  
video in applicable aspect ratio, which will differ from resolution setting.  
English  
_19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup & application  
Setting the output resolution  
You can set a different resolution according to the output device (monitor, projector).  
1. Select ouTpuT moDe from the menu.  
preSenTer ouTpuT moDe  
1080P 1920X1080  
30fps  
30fps  
20fps  
30fps  
30fps  
30fps  
}
720P  
UXGA  
SXGA  
1280X720  
1600X1200  
1280X1024  
}
}
}
}
}
}
WXGA 1280X800  
XGA  
USB  
1024X768  
USB OUT MODE  
RETURN  
}
CURRENT: 1080P MODE  
}
2. Move the cursor (►) to a desired resolution and set the output resolution of the digital presenter.  
`
Setting to UXGA/USB or changing the mode from UXGA/USB to others requires restarting to apply the changed  
M
resolution.  
`
Supported resolutions are listed in the above example. Refer to the above image.  
20_ setup & application  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Supplemental functions  
Setting the freeze mode  
1. From the menu, select ConfiGurATion freeZe.  
preSenTer ConfiGurATion  
FREEZE  
ALL DISPLAY  
DISABLED  
10BYTE  
USB TWAIN  
PROTOCOL  
C-VIDEO  
SYSTEM INFO.  
SYSTEM RESET  
NTSC  
}
}
RETURN  
}
2. Select ALL DiSpLAy or eXCepT C-viDeo mode.  
If selecting <ALL DiSpLAy> mode  
- If you press  
, both VGA/ C-VIDEO connected video and USB connected video will  
be frozen.  
If selecting <eXCepT C-viDeo> mode  
- If you press  
, all videos will be frozen except the C-VIDEO connected video.  
English  
_21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup & application  
Setting the uSB TwAin  
The USB TWAIN mode is available if you use the USB cable to connect between presenter and PC that  
has installed a graphic application in compliance with TWAIN (ex: Photoshop (Except CS5), ACDSEE, MS  
Office word 2003, etc).  
1. From the menu, select ConfiGurATion uSB TwAin.  
preSenTer ConfiGurATion  
FREEZE  
ALL DISPLAY  
DISABLED  
10BYTE  
USB TWAIN  
PROTOCOL  
C-VIDEO  
NTSC  
SYSTEM INFO.  
SYSTEM RESET  
RETURN  
}
}
}
2. To activate TWAIN, set it to enABLeD.  
`
For more information, refer to the relevant section of the application program’s user manual.  
M
`
TWAIN can be performed even if USB TWAIN is set to DISABLED, where only a specific resolution of video can be  
played properly.  
If you want to use other than 320x240 and 640x480, set USB TWAIN to ENABLED under the CONFIGURATION menu.  
22_ setup & application  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the protocol  
Select the protocol appropriately for communicating with other devices.  
1. From the menu, select ConfiGurATion proToCoL.  
preSenTer ConfiGurATion  
FREEZE  
ALL DISPLAY  
DISABLED  
10BYTE  
USB TWAIN  
PROTOCOL  
C-VIDEO  
NTSC  
SYSTEM INFO.  
SYSTEM RESET  
RETURN  
}
}
}
2. Press  
to select 10ByTe or 6ByTe.  
`
The selected protocol will be applied after exiting the menu by SAVE AND EXIT.  
J
Setting the C-viDeo  
Use this mode to match the output signal between connected device and C-VIDEO.  
1. From the menu, select ConfiGurATion C-viDeo.  
preSenTer ConfiGurATion  
FREEZE  
ALL DISPLAY  
DISABLED  
10BYTE  
USB TWAIN  
PROTOCOL  
C-VIDEO  
NTSC  
SYSTEM INFO.  
SYSTEM RESET  
RETURN  
}
}
}
2. Press  
to select nTSC or pAL.  
English  
_23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup & application  
SySTem info.  
You can check the current version information.  
1. From the menu, select ConfiGurATion SySTem info..  
verSion informATion  
RETURN  
}
<VERSION INFORMATION>  
uCOM : 0.08_120529  
SySTem reSeT  
Configured settings for all menu items will be initialized.  
1. From the menu, select ConfiGurATion SySTem reSeT.  
Are you Sure?  
Yes, Reset to Default Setting Now!  
}
No, Back to the Previous Menu }  
2. Press  
button to select yes or no.  
3. Press  
to perform the operation.  
4. Selecting yeS initializes to the factory defaults, and automatically restarts.  
DiSpLAy HoT Key  
Forced SXGA mode : Turn on, press and hold  
for more than 5 seconds to force Output mode to  
for more than 5 seconds to force Output mode to  
SXGA.  
Forced USB mode : Turn on, press and hold  
USB.  
24_ setup & application  
Download from Www.Somanuals.com. All Manuals Search And Download.  
appendix  
SpeCifiCATionS  
For enhanced performance, the product specification is subject to change without prior notice.  
Item  
Description  
Recording Lens  
Effective Range  
Zoom  
F=2.0, f=5.0mm  
Max : 364 X 257 mm (14.3"x10.1") [B4 size or more]  
Digital 16X  
Optical Lens  
Focus  
Exposure  
Auto/Manual  
AUTO (fine-tuning)  
Recording Device  
Gross pixels  
Valid pixels  
Frame Rate  
1/2.8" Progressive Scan CMOS image sensor  
2,144(H) x 1,588(V), 3.40M pixels  
2,096(H) x 1,561(V), 3.27M pixels  
Max 30 fps (2M)  
Video System  
Native signal output - Full HD (1,920 x 1,080)  
VGA Out  
Converted signal output - UXGA (1,600 x 1,200), SXGA (1,280 x 1,024), WXGA  
(1,280 x 800), HD (1,280 x 720)XGA (1,024 x 768)  
Video Output  
Resolution  
White Balance  
Image Correction  
DNR  
Available (NTSC/PAL)  
750 TV lines  
ATW / AWB (One-push) / Manual  
Image Mode/Text Mode/Custom Mode  
Available (Low light presenter with 2D/3D NR)  
Max of 4 user-defined preset numbers  
Available  
Available  
Available (180°)  
Preset  
Mask  
Functions  
Interface  
Freeze  
Rotate  
USB 2.0 protocols supported  
- UVC for Web Camera  
- Twain Driver  
USB I/F  
VGA Out – 15-pin D-SUB connector × 1  
Output Port  
C-VIDEO Output - C-VIDEO connector × 1  
I/O Port  
RS-232C - Φ3.5 jack × 1  
I/F Port  
USB - USB Type B Connector x 1 (USB device port)  
Power port  
DC IN  
5V DC In × 1  
English  
_25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
appendix  
Item  
Description  
Kensington Lock  
Integrated  
Integrated  
Others  
Security Thread on Base  
Operation Temperature  
Operation Humidity  
+5°C ~ +40°C (+41°F ~ +104°F)  
Below 90%  
5V DC (Adaptor input : AC 100V~240V free voltage,  
Adapter  
50/60Hz, output : DC 5V,2.2A)  
ABOUT 7W (MAX : 9W )  
Power consumption  
Dimension (WXHXD)  
Weight  
General Operation  
- In-use : 235 (W) x431 (H) x 115 (D) mm/9.25" (W) x 16.97" (H) x 4.53" (D)  
- Off-use : 235 (W) x115 (H) x 290 (D) mm/9.25" (W) x 4.53" (H) x 11.42" (D)  
2.3Kg (5.07 lb)  
USB Cable, VGA Cable, Power Adapter, CD(S/W, User  
Provided  
Manual), Diffusing Sheet  
Accessories  
Optional  
Microscope adapter, RS-232C cable  
26_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
menu SeTTinGS & DefAuLT  
Menu Item  
Default  
i
ii  
iii  
iv  
1080P (1920X1080) 30fps  
720P (1280X720) 30fps  
UXGA (1600X1200) 20fps  
SXGA (1280X1024) 30fps  
WXGA (1280X800) 30fps  
XGA (1024X768) 30fps  
USB OUT MODE  
OUTPUT MODE  
1080P  
ATW (Auto  
Tracking)  
WB MODE  
ATW(Auto Tracking)/AWB(KEY)/MANUAL WB  
TEXT  
IMAGE  
TONE - VERY LOW/LOW/MIDDLE/HIGH/  
IMG MODE  
IMAGE  
VERY HIGH  
CUSTOM  
COLOR - HIGH/BW/LOW/MIDDLE  
SHARPNESS - MIDDLE/HIGH/LOW  
IMAGE ADJUSTMENT  
DNR  
ANTI FLK  
ON/OFF  
OFF/ON  
ON  
OFF  
BOUNDS - VGA/USB  
VGA/USB  
C-VIDEO  
TONE - LEVEL 1/LEVEL 2/LEVEL 3/LEVEL 4  
WIDTH - 1~100  
LEVEL 4  
25  
MASK SETUP  
HEIGHT - 1~100  
25  
FREEZE  
ALL DISPLAY/EXCEPT C-VIDEO  
DISABLED/ENABLED  
10BYTE/6BYTE  
NTSC/PAL  
-
ALL DISPLAY  
DISABLED  
10BYTE  
-
-
-
USB TWAIN  
PROTOCOL  
C-VIDEO  
SYSTEM INFO.  
SYSTEM RESET Yes/No  
CONFIGURATION  
English  
_27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
appendix  
TrouBLeSHooTinG  
Problem  
Solution  
Check if the resolution of the output device matches with the presenter.  
Ex) If the projector’s highest video mode is SVGA and the presenter’s output resolution has  
been set to XGA or SXGA, no image will be displayed on the screen.  
Check if the output device has set a proper input source.  
y
No video is displayed.  
Check if brightness and focus are adjusted properly.  
y
Check if video cable is properly connected to output port.  
y
Check if the OUTPUT MODE is set to VGA / USB.  
y
Displayed screen is out of focus.  
Check if the subject is too close to the lens module.  
y
Check if the SDP program is installed on your PC properly.  
y
Check if the operating system is Windows XP or Mac OS X 10.5.8 or later. A lower  
y
USB communication with the PC  
fails.  
version of Windows may cause a trouble.  
For further information, refer to the software user’s manual (for Windows / Macintosh)  
y
provided with the product.  
28_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SALES NETWORK  
SAMSUNG TECHWIN CO., LTD.  
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400  
TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745  
SAMSUNG TECHWIN AMERICA Inc.  
SAMSUNG TECHWIN EUROPE LTD.  
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660  
Toll Free : +1-877-213-1222 Direct : +1-201-325-6920  
Fax : +1-201-373-0124  
Samsung House, 1000 Hillswood Drive, Hillswood Business  
Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS  
TEL : +44-1932-45-5300 FAX : +44-1932-45-5325  
1480 Charles Willard St, Carson, CA 90746, UNITED STATES  
Toll Free : +1-877-213-1222 FAX : +1-310-632-2195  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quatech Network Card DSCLP SSCLP 100 User Guide
QVS Surge Protector PP150 User Guide
RCA Flat Panel Television PSP42300 User Guide
Ricoh Fax Machine FAX5000L User Guide
Roland Recording Equipment MC 4 User Guide
Samsung Flat Panel Television LA32B650 User Guide
Samsung Headphones GH68 15048A User Guide
Samsung Indoor Furnishings WE357A0P User Guide
Samsung Stereo System HW C900 User Guide
Sanyo Battery Charger HR 4 5AAUC User Guide