Samsung MP3 Player DVD TR520 User Guide

Instruction Manual  
DVD-TR520  
www.samsung.com  
AK68-00627D-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handling Cautions  
Precaution  
• Before connecting other components to this TWIN  
TRAY DVD RECORDER, be sure to turn them all  
off.  
• Do not move the TWIN TRAY DVD RECORDER  
while a disc is being played, or the disc may be  
scratched or broken, the twin tray TWIN TRAY DVD  
RECORDER’s internal parts may be damaged.  
Important Safety Instructions  
Read these operating instructions carefully before using  
the unit. Follow all the safety instructions listed below.  
Keep these operating instructions handy for future  
reference.  
• Do not put a flower vase filled with water or any  
small metal objects on the TWIN TRAY DVD  
RECORDER.  
• Be careful not to put your hand into the disc tray.  
1) Read these instructions.  
2) Keep these instructions.  
• Do not place anything other than the disc in the  
disc tray.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
• Exterior interference such as lightning and static  
electricity can affect normal operation of this TWIN  
TRAY DVD RECORDER. If this occurs, turn the  
TWIN TRAY DVD RECORDER off and on again  
with the DVD POWER button, or disconnect and  
then reconnect the AC power cord to the AC power  
outlet. The TWIN TRAY DVD RECORDER will  
operate normally.  
7) Do not block any ventilation openings, Install in  
accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or  
grounding- type plug. A polarized plug has two  
blades with one wider than the other. A grounding-  
type plug has two blades and a third grounding  
prong. The wide blade or the third prong are  
provided for your safety. if the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
• Be sure to remove the disc and turn off the TWIN  
TRAY DVD RECORDER after use.  
• Disconnect the AC power cord from the AC outlet  
when you don’t intend to use the TWIN TRAY DVD  
RECORDER for long periods of time.  
• Clean the disc by wiping in a straight line from the  
inside to the outside of the disc.  
10) Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, the point where they exit from the  
apparatus.  
11) Only use attachments/accessories specified by the  
manufacturer.  
Maintenance of Cabinet  
For safety reasons, be sure to disconnect the AC  
power cord from the AC outlet.  
12) Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid  
injury from tip-over.  
Do not use benzene, thinner, or other solvents  
for cleaning.  
Wipe the cabinet with a soft cloth.  
13) Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
Disc Handling  
14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
• Use discs with regular  
shapes. If an irregular disc  
(a disc with a special  
shape) is used, this TWIN  
TRAY DVD RECORDER  
may be damaged.  
English - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
condensation may generate on the operating parts  
and lens and cause abnormal disc playback. If this  
occurs, do not connect the plug to the power outlet  
and wait for two hours. Then insert the disc and try to  
playback again.  
Holding discs  
• Avoid touching the surface of a  
disc where recording is  
performed.  
• Be careful not to harm the disc because the data on  
these discs is highly vulnerable to the environment.  
Cartridge  
Disc Specifications  
Disc Type  
• This is used to prevent damage by  
dirt, scratches, etc. when using a  
DVD-RAM disc in the R tray.  
DVD-Video  
DVD-RAM, DVD-RW and DVD-R  
• Clean with an optional DVD-RAM/PD disc  
cleaner. Do not use cleaners or cloths for CDs to  
clean DVD-RAM/-RW/-R discs.  
• A digital versatile disc (DVD) can contain up to 135-  
minutes of video, 8 audio languages and 32 subtitle  
languages. It is equipped with MPEG-2 picture  
compression and Dolby digital surround, allowing you  
to enjoy vivid and clear theater quality video in the  
comfort of your own home.  
DVD-Video, Audio-CD  
• When switching from the first layer to the second layer  
of a dual-layered DVD Video disc, there may be  
momentary distortion in the video and sound. This is  
not a malfunction of the unit.  
• Wipe off dirt or contamination on the disc with a  
soft cloth.  
• Once a DVD-RW/-R recorded in Video Mode is  
finalized, it becomes a DVD-Video disc.  
Cautions on handling discs  
• Do not write on the printed side with a ball-point  
pen or pencil.  
• Do not use record cleaning sprays or antistatic.  
Also, do not use volatile chemicals, such as  
benzene or thinner.  
• Do not apply labels or stickers to discs. (Do not  
use discs fixed with exposed tape adhesive or  
leftover peeled-off stickers.)  
• Do not use scratch-proof protectors or covers.  
• Do not use discs printed with label printers  
available on the market.  
Audio CD  
• An audio disc on which 44.1kHz PCM Audio is  
recorded.  
• Plays CD-DA format audio CD-R and CD-RW discs.  
• The unit may not be able to play some CD-R or CD-  
RW discs due to the condition of the recording.  
• Do not load warped or cracked discs.  
CD-RW/-R  
Disc Storage  
• Use a 700MB(80 minutes) CD-R/RW disc. If possible,  
do not use a 800MB(90 minutes) or above disc, as the  
disc may not play back.  
• If the CD-R/RW disc was not recorded as a closed  
session, you may experience a delay in the early  
playback time, all recorded files may not play.  
• Some CD-R/RW discs may not be playable with this  
unit, depending on the device which was used to burn  
them. For contents recorded on CD-R/RW media from  
CDs for your personal use, playability may vary  
Be careful not to harm the disc because the data on  
these discs is highly vulnerable to the environment.  
• Do not keep under direct sunlight.  
• Keep in a cool ventilated area.  
• Store vertically.  
• Keep in a clean protection jacket.  
• If you move your TWIN TRAY DVD RECORDER  
suddenly from a cold place to a warm place,  
depending on contents and discs.  
4 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cartridges can only be used in the R tray of this  
product.  
DVD-R Disc Playback and Recording  
• Some cartridges are able to eject the disc inside.  
Even if you are able to eject the disc, always use the  
disc with the cartridge to ensure correct operation.  
• DVD-RAM discs have a Write Protect tab in order to  
avoid accidental erasure of recorded data. With the  
Write Protect tab set to PROTECT, you can play the  
disc, but recording or erasing will not work. Set the  
Write Protect tab to UNPROTECT to format the disc  
or erase data.  
• This unit is compatible with both non-cartridge and  
cartridge DVD-RAM, but the write-protect tabs on  
cartridge-type discs give better protection to your  
recordings.  
You cannot play a DVD-RAM in most DVD components  
due to compatibility issues.  
• Only DVD-RAM standard Version 2.0. discs can be  
played in this unit.  
• DVD-RAM recorded on this unit may not work with  
other DVD components. To determine compatibility  
with these DVD-RAM discs, refer to the user’s manual  
for the player.  
• Once a DVD-R recorded in Video Mode is finalized, it  
becomes a DVD-Video disc.  
You can record onto the available space on the disc  
and perform editing functions such as giving titles to  
discs and programs and erasing programs before  
finalizing.  
• When programming is erased from a DVD-R, that  
space does not become available. Once an area on a  
DVD-R is recorded on, that area is no longer available  
for recording, whether the recording is erased or not.  
• It takes about 30 seconds for the unit to complete  
recording management information after recording  
finishes.  
• Playback may be impossible in some cases due to the  
condition of recording.  
• This unit can play back DVD-R discs recorded and  
finalized with a Samsung DVD video recorder. It may  
not be able to play some DVD-R discs depending on  
the disc and the condition of the recording.  
• The unfinalized DVD-R discs can not play back in the  
P Tray.  
Disc  
Maximum no. of recordings by disc type  
DVD-RAM 100,000  
DVD-RW  
DVD-R  
1,000  
1
DVD-RW Disc Playback and Recording  
• Recording and playback can be performed on DVD-  
RW discs in both the Video and VR Modes.  
• Once a DVD-RW recorded in both the Video and VR  
Modes is finalized, you cannot perform additional  
recording.(See pages 106~107)  
Disc Copy  
Disc Copy Specifications  
• Once a DVD-RW recorded in Video Mode is finalized,  
it becomes a DVD-Video disc.  
Recorder tray  
DVD-R  
DVD-RW  
(VR mode)  
DVD-RW  
(V mode)  
DVD-RAM  
No  
Player tray  
• In both modes, playback can be performed before and  
after finalization, but additional recording, deleting and  
editing can not be performed after finalization.  
No  
DVD-Dual Layer  
Disc  
No  
No  
No  
DVD-Single  
Layer, DVD-  
Video, without  
Copy Protection  
• If you want to record the disc in VR Mode and then  
record in V Mode, be sure to execute Format.  
Be careful when execute Format because all the  
recorded data may be lost.  
Yes  
Yes  
No  
Copy Protected  
Disc  
No  
No  
No  
No  
No  
No  
No  
• A DVD-RW blank disc is initialized to VR Mode when  
first initialized.  
Recorded Video  
Disc- DVD-RAM  
Yes  
• The unfinalized DVD-RW(Video mode)discs can not  
play back in the P Tray.  
Recorded Video  
Disc- DVD-RW  
(V Mode)  
No  
Yes  
No  
Yes  
Yes  
No  
Recorded Video  
Disc- DVD-RW  
(VR Mode)  
No  
No  
No  
No  
DVD-RAM Disc Playback and Recording  
Recorded Video  
Disc- DVD-R  
Yes  
Yes  
Yes = Disc copying is possible.  
No = Disc copying is not possible.  
• DVD-RAM discs come with or without a cartridge. For  
this product, we recommend DVD-RAM discs that  
come with cartridges.  
English - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using JPEG disc  
COPY PROTECTION  
• Many DVD discs are encoded with copy  
protection. Because of this, you should only  
connect your TWIN TRAY DVD RECORDER  
directly to your TV, not to a VCR. Connecting to a  
VCR results in a distorted picture from copy-  
protected DVD discs.  
• CD-R, DVD-R/RW/RAM, with JPEG files recorded  
with UDF, ISO9660 or JOLIET format can be  
playbacked.  
• Only JPEG files with the “.jpg” or “.JPG” extension  
can be displayed.  
• This product incorporates copyright protection  
technology that is protected by methods claims of  
certain U.S. patents and other intellectual  
property rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright  
protection technology must be authorized by  
Macrovision Corporation, is intended for home  
and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
• The unit can handle a maximum of 4,500 files and  
1,000 sub folders under a folder.  
• MOTION JPEG and progressive JPEG are not  
supported.  
DVD-RW (VR mode)  
• This is a format that is used for recording data on a  
DVD-RAM or DVD-RW disc. You can record multiple  
titles, edit, delete, partial delete, create a playlist, etc.  
• A disc that is recorded in this mode may not be  
playable on another manufacturer's DVD recorder or  
player.  
Protection  
This TWIN TRAY DVD  
RECORDER allows you to  
protect the contents of your  
discs, as described below.  
DVD-RW (V mode)  
• Cartridge Protection allows you to protect discs from  
disc formatting and program deletion due to  
unintended operations. The cartridge write protect tab  
should be set to the unprotect position to be able to  
record, copy, edit or erase a DVD-RAM disc.  
• This is a format that is used for recording data on a  
DVD-RW or DVD-R disc. The disc can be played by  
existing DVD RECORDER once it has been finalized.  
• If a disc that has been recorded in Video Mode by  
another manufacturer's recorder, but has not been  
finalized, it may be played or additionally be recorded  
by this TWIN TRAY DVD RECORDER.  
• Program Protection: See page 83 “Locking(Protecting)  
a Title”  
• Disc Protection : See page 104 “Disc Protection”  
DVD-RAM/-RW/-R discs that are incompatible with the  
DVD-VIDEO format cannot be played in this product.  
Do not use the following discs!  
For more information on DVD recording compatibility,  
consult your DVD-RAM/-RW/-R manufacturer.  
• LD, CD-G, CD-I, CD-ROM, SACD CD Layer,  
DVD-ROM, DVD+R and DVD+RW discs should not  
be used in this product.  
Use of poor quality DVD-RAM/-RW/-R discs may  
cause following unexpected problems including,  
without limitation, recording failure, loss of recorded  
or edited materials or damage to the TWIN TRAY  
DVD RECORDER.  
[Note]  
Disc types that can be played : CD/CD-R/CD-RW/  
MP3/JPEG/DVD-Video/DVD-RAM/-RW/-R.  
DVD-RW/-R discs which have been recorded in Video  
Mode on another manufacturer's recorder, can play  
only when finalized.  
• Some commercial discs and DVD discs purchased  
outside your region may not be playable with this  
product. When these discs are played, either “No  
disc.” or “Please check the regional code.” will be  
displayed.  
Disc Format  
Using MP3 disc  
• CD-R, DVD-R/RW/RAM, with MP3 files recorded with  
UDF, ISO9660 or JOLIET format can be playbacked.  
• Only MP3 files with the “.mp3” or “.MP3” extension  
can be played.  
• For MP3 files recorded with a VBR(Variable Bit Rates),  
from 32 Kbps to 320 Kbps, the sound may cut in and out.  
• Playable bit-rate range is from 56 Kbps to 320 Kbps.  
• The unit can handle a maximum of 1,500 files and  
1,000 sub folders under a folder.  
• If a disc has been recorded in Video Mode by another  
manufacturer's recorder, but has not been finalized, it  
may not be played or additionally be recorded by this  
TWIN TRAY DVD RECORDER.  
6 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Method 1 : Connecting to your TV . . . . . . . . . . . . . . . . .22  
Method 2 : Connecting to a stereo amplifier  
Contents  
with analog input jacks . . . . . . . . . . . . . . . . . . . . . . . . .22  
Method 3: Connecting to an AV amplifier  
with a digital input jack . . . . . . . . . . . . . . . . . . . . . . . . .23  
Step 4 : Connecting External devices . . . . . . . . . . .23  
Method 1 : Connecting a VCR, Set-Top Box(STB) or  
TWIN TRAY DVD player to the AV 1 IN jacks . . . . . . . .23  
Method 2 : Connecting a Camcorder to  
Getting Started  
the AV 2 IN jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Method 3 : Connecting a Camcorder to  
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . .3  
Handling Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Maintenance of Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Disc Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Disc Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Disc Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Disc Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Before Reading the User’s Manual . . . . . . . . . . . . .10  
How to use the TWIN TRAY DVD RECORDER . . .10  
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . .16  
the DV IN jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Step 5 : Connecting the Power Cord . . . . . . . . . . . .24  
System Setup  
On-Screen Menu Navigation.....................................25  
OSD Language Setup ...............................................26  
Auto Clock Set ...........................................................26  
Manual Clock Set.......................................................28  
Auto Channel Memory...............................................29  
Manual Channel Set..................................................30  
Auto Power Off Setting..............................................31  
CM Skip Time Setting................................................31  
EP Mode Time Setting...............................................32  
Setting up the Front Display Options........................33  
Automatic Chapter Creator........................................34  
Setting up the Language Options.............................35  
Setting up the Audio Options.....................................36  
Setting up the Video display Options........................37  
Setting up the Progressive scan...............................38  
Canceling the Progressive scan ...............................39  
Setting up the Parental Control.................................40  
If you forgot your password............................................40  
About the Rating Level ...................................................41  
About the Change Password .........................................41  
Connecting & Setting up  
Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Step 1: Connecting the Antenna Cable . . . . . . . . . .18  
Method 1 : Antenna + TWIN TRAY DVD RECORDER +  
TV : No Cable box . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Method 2 : Antenna + Cable box + TWIN TRAY DVD  
RECORDER + TV : Cable box with many scrambled  
channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Method 3 : Antenna + TWIN TRAY DVD RECORDER +  
Cable box + TV : Cable box with a few scrambled  
Playback  
channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Step 2 : Connecting the Video cable . . . . . . . . . . . .20  
Method 1 : Connecting to a Video input jack . . . . . . . . .20  
Method 2 : Connecting to an S-Video input jack . . . . .21  
Method 3 : Connecting to Component video input  
Before Playing..............................................................42  
Playing a Disc ..............................................................43  
Using the Disc Menu & Title Menu.............................44  
Using the Search & Skip Functions............................45  
B
R
jacks(Y,P ,P ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Step 3 : Connecting the Audio cable . . . . . . . . . . . .22  
English - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Title Copy ...................................................................95  
About the Copy Screen...................................................95  
Contents(Title) Copy Specifications. ..............................95  
Copying a Title that has been edited once before ........97  
Changing the Record Mode ...........................................98  
Copying Multiple Titles at One Time .......................99  
Deleting an Undesired Title from the Copy List...........100  
Previewing a Selected Title from the Copy List...........101  
Selecting Record Mode of Each Title from the  
Slow Motion Play/Step Motion Play............................46  
About ANYKEY............................................................46  
Playing the Title List.....................................................48  
Navigation Menu..........................................................49  
Using the Markers........................................................52  
Using the Bookmarks ..................................................54  
Selecting the Subtitle Language.................................56  
Selecting the Soundtracks & Audio Channels ...........57  
Changing the Camera Angle.......................................58  
Repeat Play..................................................................58  
Zooming-In ...................................................................60  
Select Tray....................................................................61  
Playing an Audio CD/MP3...........................................61  
Playing a Picture..........................................................68  
Copy List........................................................................101  
Changing Record Mode of All Titles from the  
Copy List .......................................................................102  
Disc Copy.................................................................102  
Disc Copy Specifications..........................................102  
Disc Manager ......................................................... 103  
Editing the Disc Name ..................................................103  
Disc Protection ............................................................. 104  
Formatting a Disc..........................................................105  
Delete All Title Lists .......................................................105  
Finalizing a Disc ............................................................106  
Unfinalizing a Disc (V/VR mode)..................................107  
Recording  
Before Recording.........................................................71  
Recording the current TV  
program you are watching...........................................73  
Recording from external equipment  
you are watching..........................................................74  
Copying from a Camcorder.........................................75  
Making a One Touch Recording (OTR)......................76  
Making a Timer Recording..........................................77  
Flexible Recording (for Timer Recording only)...........79  
Editing the Timer Record List......................................79  
Deleting a Timer Record List.......................................80  
Reference  
Troubleshooting........................................................109  
Specifications ...........................................................113  
Warranty....................................................................114  
Editing  
Basic Editing (Title List).............................................82  
Renaming(Labeling) a Title.............................................82  
Locking (Protecting) a Title .............................................83  
Deleting a Title.................................................................83  
Deleting a Section of a Title (Partial Delete)..................85  
Advanced Editing (Playlist) .......................................87  
Creating a Playlist............................................................87  
Playing Entries in the Playlist..........................................88  
Renaming a Playlist Entry...............................................89  
Editing a Scene for the Playlist.......................................90  
Deleting a Playlist Entry from the Playlist ......................94  
8 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automated Quality Adjustment for Timer Recording  
If FR mode is selected, the video quality is adjusted  
automatically so that all video for the scheduled time can  
be recorded onto the free disc space.  
(See page 79)  
General Features  
Creating a DVD video title using DVD-RW/-R disc  
The TWIN TRAY DVD RECORDER allows you to play  
high quality digital video on DVD-RAM/-RW/-R discs. You  
can also record and edit digital images on DVD-RAM/-  
RW/-R discs in the R Tray.  
With the TWIN TRAY DVD RECORDER, you can create  
your own DVD Video titles on 4.7 GB DVD-RW/-R discs.  
This unit can not open the P tray and the R tray  
simultaneously.  
Copying data from a digital camcorder using a DV  
input jack  
Record DV Device video onto, DVD-RAM, DVD-RW or  
DVD-R discs using the DV input jack (IEEE 1394-  
4pin/4pin) in the R Tray. (See pages 75~76)  
Copy from P Tray to R Tray  
You can copy non-copy protected recordings from the disc  
in P Tray to recordable disc in the R Tray. Usually you can  
use the high speed copy feature.  
You can also choose to copy material at a different  
recording quality from the original. For example, you might  
want to copy a XP mode recording on the P Tray to  
SP(Standard play)quality on the R Tray so that you can fit  
other recordings on the same disc.  
High quality Progressive Scan  
Progressive scanning provides high resolution and flicker  
free video. The 10-bit 54-MHz DAC and 2D Y/C  
Separating Circuitry provides the highest image playback  
and recording quality. (See pages 38~40)  
High quality digital audio and video recording and  
playback  
Record up to 16-hours of video with a double sided 9.4  
GB DVD-RAM disc, up to 8-hours of images with a 4.7  
GB DVD-RAM/-RW/-R disc, depending on the recording  
mode.  
A variety of functions with an easy-to-use  
user interface  
The integrated menu system and the messaging  
function allow you to perform desired operations both  
easily and conveniently. With a DVD-RAM or DVD-RW  
disc, you can edit recorded video, create a playlist, edit  
video in a specific sequence according to your  
requirements in the R Tray.  
Selectable Recording Mode  
You can set your TWIN TRAY DVD RECORDER to one  
of four different recording speeds, each varying in  
recording quality and length. EP (6Hr or 8Hr) mode yields  
the most recording time, LP & SP modes provide less  
recording time with higher quality recording, XP mode  
gives you the highest quality recording.  
English - 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright  
Before Reading the  
User’s Manual  
©2005 Samsung Electronics Co.  
All rights reserved; No part or whole of this user’s  
manual may be reproduced or copied without the prior  
written permission of Samsung Electronics Co.  
Make sure to check the following terms before reading  
the user manual.  
Icons that will be used in manual  
How to use the  
Icon  
Term  
Definition  
TWIN TRAY DVD RECORDER  
This involves a function available  
in DVD or DVD-R/DVD-RW  
discs that have been recorded  
and finalized in Video Mode.  
DVD  
Step 1  
Select the disc type  
This involves a function available  
in DVD-RAM.  
RAM  
RW  
R
This device can record on the following types of  
discs.  
This involves a function available  
in DVD-RW.  
If you want to repeatedly record on the same disc  
or you want to edit the disc after recording, select a  
rewritable DVD-RW or DVD-RAM type disc. If you  
want to save a recording without any changes,  
choose a non-rewritable DVD-R.  
This involves a function available  
in DVD-R.  
This involves a function available  
in a data CD (CD-R or CD-RW).  
CD  
This involves a function available  
in CD-R/-RW or DVD-R/-RW/-RAM  
discs.  
JPEG  
MP3  
This involves a function available  
in CD-R/-RW or DVD-R/-RW/-RAM  
discs.  
This involves a case where a  
Caution function does not operate or  
settings may be canceled.  
Step 2  
Format the disc to start recording  
Unlike a VCR, the TWIN TRAY DVD RECORDER  
automatically starts formatting when an unused  
disc is inserted. This is required for the preparation  
of recording on a disc.  
This involves a function available  
when the PLAYER tray is selected.  
PLAYER  
This involves a function available  
RECORDER when the RECORDER tray is  
selected.  
Using a DVD-RAM  
This type of disc can be formatted in DVD-Video  
Recording format (VR mode). You can edit  
recorded video and create a playlist and edit video  
in a specific sequence according to your  
requirements.  
This involves tips or instructions  
on the page that help each  
function operate.  
NOTE  
Using a DVD-RW  
One-Touch A function that can be operated  
button by using only one button.  
This type of disc can be formatted in either DVD-  
Video format (V mode) or DVD-Video Recording  
format (VR mode). For an unused disc, a message  
that asks whether to format in VR Mode or not is  
displayed. You can play a Video mode disc on  
various DVD components. A VR mode disc allows  
more varied editing.  
ANYKEY A function that can be operated  
button by using ANYKEY button.  
Using a DVD-R  
About the use of this user’s manual  
This type of disc can be formatted in DVD Video  
format. After formatting is complete, you can record  
on the disc. You can play this type of discs on  
various DVD components only when they have  
been finalized.  
1) Be sure to be familiar with Safety Instructions before  
using this product. (See pages 2~6)  
2) If a problem occurs, check the Troubleshooting.  
(See pages 109~112)  
10 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
■■  
■■  
You can only use either the VR or Video  
mode on a DVD-RW, but not both at the  
same time.  
You can change the DVD-RW format to  
another format by reinitializing. It should  
be noted that the disc's data will be lost  
when changing formats.  
NOTE  
Step 5  
Editing a recorded disc  
Editing on discs is easier than conventional video  
tapes. The TWIN TRAY DVD RECORDER supports  
many different edit functions, possible only with DVDs.  
With a simple and easy edit menu, you can operate  
various edit functions, such as delete, copy, rename,  
lock, etc., on a recorded title.  
Creating a playlist (DVD-RAM/-RW in VR mode.)  
Step 3  
Recording  
With this TWIN TRAY DVD RECORDER you can  
create a new playlist on the same disc and edit it  
without the change of the original recording.  
There are two different recording methods, Direct  
Recording and Timer Recording. Timer recording is  
classified as a Date : Once, Daily or Weekly.  
Recording mode : XP (high quality mode), SP  
(standard quality mode), LP (long recording mode),  
and EP (extended mode) according to the recording  
mode. When recording is set in the FR(Flexible  
recording mode), the best quality picture is recorded  
with regards to the remaining time on the disc and  
length of the Timer Recording.  
■■  
The Edit functions of the Title List and  
Playlist are available only in the R Tray.  
NOTE  
During recording, a title is created between two  
points where you start and stop recording.  
Chapters will be created automatically when you  
finalize recording on DVD-RW/-R discs in Video  
mode.  
Finalizing & Playing on  
other DVD components  
Step 6  
To play your DVD on other DVD components,  
finalizing may be necessary. First, finish all editing and  
recording operations, then finalize the disc.  
The chapter’s length (interval between chapters)  
varies according to the recording mode.  
When using a DVD-RW disc in VR Mode  
Although finalizing is generally unnecessary when  
playing the disc on a VR Mode compatible  
component, a finalized disc should be used for  
playback on that type of component.  
Step 4  
Playing  
When using a DVD-RW disc in Video Mode  
The disc should be finalized first to enable playback  
on anything other than this TWIN TRAY DVD  
RECORDER. No more editing or recording can be  
made on the disc once it has been finalized.  
To enable recording on the disc again, disc should be  
unfinalized.  
You can select the title you want to play in a  
displayed menu and then immediately start  
playback.  
A DVD consists of sections, called titles, and sub  
sections, called chapters.  
When using a DVD-R disc  
You should finalize the disc to play it on a component  
other than this TWIN TRAY DVD RECORDER. You  
cannot edit or record on the disc once it has been  
finalized.  
■■  
P tray can play finalized DVD-R or DVD-  
RW(V) discs. If you want to play  
NOTE  
unfinalized DVD-R or DVR-RW(V) discs,  
they must be inserted in the R tray.  
English - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
Accessories  
Setting the Remote Control  
Check for the supplied accessories below.  
You can control certain functions of another  
manufacturer’s TV with this remote control.  
Control function buttons involve: TV POWER  
CH , TV VOL + -, number buttons, TV MUTE,  
INPUT button.  
,
RF Cable for TV  
(AC39-42001J)  
Video/Audio Cable  
(AC39-00073A)  
Batteries for Remote  
Control (AAA Size)  
(AC43-12002H)  
Remote Control  
(AK59-00023P)  
Instruction Manual  
(AK68-00627D)  
Quick Guide  
(AK68-00890A)  
Preparing the Remote Control  
Install Batteries in the Remote Control  
Open the battery cover on the back of the remote control.  
Insert two AAA batteries. Make sure that the polarities  
(+ and -) are aligned correctly.  
Replace the battery cover.  
If the remote does not operate properly:  
Check the polarity + - of the batteries (Dry-Cell)  
Check if the batteries are drained.  
Check if remote sensor is blocked by obstacles.  
Check if there is any fluorescent lighting nearby.  
Dispose of batteries according to local environmental  
regulations. Do not put them in the household trash.  
12 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controlling TVs with the Remote Control  
1. Press and hold the TV POWER button.  
2. Enter a 2-digit code by using the number buttons on  
the remote control.  
BRAND  
BUTTON  
SELECO  
SHARP  
74  
36, 37, 38, 39, 48  
SIEMENS  
SINGER  
71  
57  
See “Controllable TV Codes”  
SINUDYNE  
SONY  
57  
If the code works, your TV set will be turned on or off.  
If it does not respond, try other codes.  
Controllable TV Codes.  
35, 48  
TELEAVA  
TELEFUNKEN  
THOMSON  
THOMSON ASIA  
TOSHIBA  
WEGA  
73  
67, 73, 75, 76  
BRAND  
BUTTON  
72, 73, 75  
AIWA  
82  
80, 81  
ANAM  
10, 11, 12, 13, 14, 15, 16, 17, 18  
47, 48, 49, 50, 51, 52  
BANG & OLUFSEN  
BLAUPUNKT  
BRANDT  
BRIONVEGA  
CGE  
57  
71  
73  
57  
52  
57  
06  
63  
YOKO  
ZENITH  
CONTINENTAL EDISON 75  
■■  
If several codes are indicated for your  
television brand, try each one in turn until  
you find one that works.  
DAEWOO  
19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31,  
NOTE  
32, 33, 34  
EMERSON  
FERGUSON  
FINLUX  
64  
■■  
If you replace the remote control's  
batteries, you must set the brand code  
again.  
73  
06, 49, 57  
FORMENTI  
FUJITSU  
GRADIENTE  
GRUNDIG  
HITACHI  
IMPERIAL  
JVC  
57  
84  
70  
49, 52, 71  
Then you can control the television using the following  
buttons after the TV button.  
60, 72, 73, 75  
52  
61, 79  
Button  
Function  
LG  
06, 19, 20, 21, 22, 78  
TV POWER  
INPUT  
Used to switch the television on and off.  
Used to select an external source.  
Used to adjust the volume of the television.  
Used to select the desired channel.  
Used to toggle the sound on and off.  
Used to input number directly.  
LOEWE  
06, 69  
LOEWE OPTA  
MAGNAVOX  
METZ  
06, 57  
TV VOL (+ -)  
40  
57  
CH (  
)
MITSUBISHI  
MIVAR  
06, 48, 62, 65  
TV MUTE  
52, 77  
Number buttons  
NEC  
83  
NEWSAN  
NOBLEX  
NOKIA  
68  
66  
■■  
74  
The functions listed above will not  
necessarily work on all televisions. If you  
encounter problems, operate the television  
directly.  
NORDMENDE  
PANASONIC  
PHILIPS  
72, 73, 75  
NOTE  
53, 54, 74, 75  
06, 55, 56, 57  
PHONOLA  
PIONEER  
RADIOLA  
RADIOMARELLI  
RCA  
06, 56, 57  
58, 59, 73, 74  
06, 56  
57  
45, 46  
REX  
74  
SABA  
57, 72, 73, 74, 75  
SALORA  
SAMSUNG  
SANYO  
74  
01,02,03,04,05,06,07,08,09  
41, 42, 43, 44, 48  
06  
SCHNEIDER  
English - 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description  
Front Panel  
1. POWER BUTTON  
9. DV-IN  
Connect external digital equipment with a DV  
Turns the TWIN TRAY DVD RECORDER  
on and off.  
jack. (such as a camcorder)  
2. R (Record) TRAY  
10. INPUT BUTTON  
Opens to accept a disc.  
Select input signal in external input mode.  
(Tuner, AV1, AV2 or DV)  
3. OPEN/CLOSE BUTTON  
Opens and closes the R Tray  
11. P.SCAN BUTTON  
Selects the progressive scan mode.  
4. DIRECT COPY BUTTON  
Copy Titles and Disc from the disc  
in the P Tray to the disc in the R Tray.  
12. REC/REC MODE/PAUSE/CH BUTTONS  
Select to start recording, to set the  
Recording time and picture quality, or to  
pause a recording.  
5. OPEN/CLOSE BUTTON  
Opens and closes the P Tray.  
6. SELECT BUTTONS  
Select preset TV channels. Same as CH  
button on the remote control.  
Select R or P Tray.  
7. P (Play) TRAY  
13. PLAY/PAUSE/SEARCH/SKIP BUTTONS  
Plays a disc, pauses playback or recording,  
goes to the next title/chapter/track, or goes  
back to the previous title/chapter/track.  
Opens to accept a disc.  
8. AV 2 INPUT  
Connect external equipment.  
Front Panel Display  
1. Lights when a disc is loaded.  
2. Lights in the record mode.  
3. Lights to indicate the timer record mode.  
4. Lights when a -R/RW/RAM disc is loaded.  
5. Playing time/clock/current status indicator.  
6. Lights in the progressive scan mode.  
14 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
Fan  
The fan always revolves when the power is on.  
Ensure a minimum of 4” clear space on all sides of the  
fan when installing the product.  
1. DIGITAL AUDIO OUT(OPTICAL)  
6. S-VIDEO OUT(better video quality)  
Connects to an amplifier having a digital optical  
audio input jack.  
Connects the input of external equipment using  
an S-Video cable.  
2. COMPONENT VIDEO OUT(best video quality)  
7. AV 1 VIDEO IN  
Connects to equipment having Component video  
input jacks.  
Connects to the video output of external  
equipment using a video cable.  
3. AV VIDEO OUT(good video quality)  
8. AV 1 AUDIO IN  
Connects to the Video input of external  
equipment using a Composite Video cable.  
Connects to the audio output of external  
equipment using audio cables.  
4. AV AUDIO OUT  
9. ANT IN/ANT OUT (TO TV)  
Connects to the audio input of external  
equipment using audio cables.  
Connects antenna cables.  
5. S-VIDEO IN  
Connects the output of external equipment using  
an S-Video cable.  
ꢀꢀ  
The Antenna connection does not pass the  
DVD's output signal. To watch a DVD on your  
TV, you must connect audio/video cables.  
NOTE  
English - 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. ENTER/DIRECTION Buttons (…†œ √ Buttons)  
Tour of the Remote Control  
14. RETURN Button  
15. INFO Button  
1
20  
This will display current setting or disc status.  
16. REC Button  
Use to make a recording on DVD-RAM/-RW/-R discs.  
2
3
17. DIRECT COPY  
Press this when you copy from the P tray to the R Tray.  
To start copying, press the COPY button on the title list  
screen or press the COPY button during the playback.  
21  
22  
4
5
23  
24  
18. REPEAT Button  
Allows you to repeat a title, chapter, track or disc.  
6
25  
26  
7
19. REC PAUSE Button  
Use this to pause during recording.  
7
8
9
20. TV POWER Button  
21. AUDIO/TV MUTE Button  
9
10  
11  
Use this to access various audio functions on a disc (DVD  
mode).  
27  
28  
This operates as sound mute. (TV mode)  
29  
12  
13  
22. INPUT Button  
Select line input signal in external input mode. (Tuner,  
AV1, AV2 or DV  
)
23. TV Button  
30  
31  
14  
Press this to operate TV.  
15  
16  
17  
24. OPEN/CLOSE Button  
32  
33  
To open and close the disc tray.  
25. CM SKIP Button  
The unit can be set to automatically skip a portion of the  
program during playback of a DVD disc.  
34  
35  
18  
19  
26. CH Button  
Use this to select a TV channel.  
27. PLAY/PAUSE Button  
1. DVD POWER Button  
2. NUMBER Buttons  
Press to play/pause a disc.  
28. PLAY LIST/TITLE MENU Button  
3. 100+ Button  
Use this to return to the Title menu, or to view the  
recorded Playlist.  
Press this to select channel 100 or higher.  
4. R Button  
29. ANYKEY Button  
Press this to operate R tray(Recorder).  
View and select the applicable features under current  
status.  
5. P Button  
Press this to operate P tray(Player).  
30. CANCEL Button  
6. TV VOL Button  
31. SUBTITLE Button  
TV volume adjustment  
Press this to switch the DVD’s subtitle language.  
32. TIMER Button  
7. REVERSE/FORWARD SKIP Buttons  
Press to skip a disc backwards or forwards.  
8. REVERSE/FORWARD STEP Buttons  
Press to directly enter the Timer Recording Mode menu.  
Each press will play one-frame forward or reverse.  
33. MARKER Button  
9. REVERSE/FORWARD SEARCH Buttons  
Use this to bookmark or mark a position while playing a  
disc.  
Press to search a disc backwards or forwards.  
10. STOP Button  
34. REPEAT A-B Button  
Press to stop a disc or to stop the recording.  
Allows you to repeat a title, chapter, track or disc.  
35. REC MODE Button  
11. TITLE LIST/DISC MENU Button  
Use this to return to the Disc menu, or to view the  
recorded Title List.  
Use this to set the desired Recording time and picture  
quality. (XP/SP/LP/EP)  
12. MENU Button  
Brings up the TWIN TRAY DVD RECORDER’s setup  
menu.  
16 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Overview  
Connecting &  
Setting up  
A Quick Overview presented in this guide will give  
you enough information to start using the TWIN  
TRAY DVD RECORDER.  
This section involves various methods of  
connecting the TWIN TRAY DVD RECORDER  
to other external components and required  
initial setting modes.  
Step 1 : Connecting the Antenna cable  
Step 2 : Connecting the Video cable  
Step 3 : Connecting the Audio cable  
Step 4 : Connecting External devices  
Step 5 : Connecting the Power cord  
Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Step 1: Connecting the Antenna Cable . . . . . . . . .18  
Step 2 : Connecting the Video cable . . . . . . . . . . .20  
Step 3 : Connecting the Audio cable . . . . . . . . . . .22  
Step 4 : Connecting External devices . . . . . . . . . .23  
Step 5 : Connecting the Power Cord . . . . . . . . . . .24  
Note to CATV system installer: This reminder is  
provided to call CATV system installer’s attention to  
Article 820-40 of the National Electrical Code  
(Section 54 of Canadian Electrical Code, Part I),  
that provides guidelines for proper grounding and,  
in particular, specifies that the cable ground shall  
be connected to the grounding system of the  
building as close to the point of cable entry as  
practical.  
English - 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Method 1 : Antenna + TWIN TRAY  
DVD RECORDER + TV : No Cable  
box  
Step 1: Connecting the  
Antenna Cable  
You can record non-scrambled channels by selecting  
the channel on the TWIN TRAY DVD RECORDER.  
Also use this Method if you watch channels without a  
cable box.  
There are several ways to connect your TWIN TRAY DVD  
RECORDER. Select the antenna that best suits you below.  
Method 1 : Antenna + TWIN TRAY DVD RECORDER + TV : No  
Cable box  
Method 2 : Antenna +Cable box + TWIN TRAY DVD  
RECORDER + TV : Cable box with many scrambled channels  
Method 3 : Antenna + TWIN TRAY DVD RECORDER + Cable  
box +TV : Cable box with a few scrambled channels  
To ANT IN  
ꢀꢀ  
If you are using an off-air antenna that  
has 300-ohm twin flat leads, use an  
NOTE  
external antenna connector (300-75 ohm  
adaptor : not supplied) to connect the  
antenna to the TWIN TRAY DVD  
RECORDER.  
To ANT OUT  
TV  
RF Cable  
TO ANT INPUT  
ꢀꢀ  
If you have two separate antennas (one  
VHF and the other UHF), use a UHF/VHF  
combiner-adaptor (available at most  
electronics shops) to connect the antenna  
to the TWIN TRAY DVD RECORDER.  
ꢀꢀ  
The ANT OUT RF OUT jack of this  
product sends only signals received  
through the antenna. It does not output  
Audio/Video signals. You must connect  
Audio/Video cables to view Video from  
the unit. (i.e. DVD playback)  
18 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Method 2 : Antenna + Cable box +  
TWIN TRAY DVD RECORDER + TV :  
Cable box with many scrambled  
channels  
Method 3 : Antenna + TWIN TRAY  
DVD RECORDER + Cable box + TV :  
Cable box with a few scrambled  
channels  
You can record channels by selecting the channel on  
the cable box. You cannot record one channel while  
watching another channel. Be sure that the cable box is  
turned on.  
You can record non-scrambled channels by selecting  
the channel on the cable box. You cannot record  
scrambled channels that require a cable box.  
Wall  
Wall  
Cable box  
To ANT IN  
To ANT IN  
To ANT OUT  
To ANT OUT  
Cable box  
TV  
RF Cable  
TV  
RF Cable  
To ANT INPUT  
To ANT INPUT  
English - 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Method 1 : Connecting to a Video  
input jack  
Step 2 : Connecting the Video  
cable  
Connect a video(yellow) cable between the  
VIDEO(yellow) OUT jack on TWIN TRAY DVD  
RECORDER and VIDEO(yellow) IN jack on the TV (or  
AV amplifier).  
You will enjoy regular quality images.  
Connect audio cables(white and red) between the  
AUDIO OUT jacks on the TWIN TRAY DVD  
RECORDER and AUDIO IN jacks on TV(or AV  
amplifier).  
There are several ways to connect your TWIN TRAY DVD  
RECORDER. Select one of the following video connecting  
that best suits you below.  
Method 1 : Connecting to a Video input jack  
Method 2 : Connecting to an S-video input jack  
Method 3 : Connecting to Component video input jacks  
(See pages 22~23)  
S-Video, Component video and Progressive Output Modes  
S-Video and Component video output are available only if your  
TV supports S-Video input or Component video input,  
respectively. If S-Video or Component video output does not  
work, check the TV connections and the TV input selection  
settings. (For information on how to connect to a TV, see page  
18.)  
yellow  
Compared to standard interlaced video, progressive scan  
doubles the amount of video lines fed to your TV, resulting in a  
more stable, flicker-free, and clear image than interlaced video.  
The progressive scan video output jack is used in progressive  
output mode. This is only available with TVs that support  
progressive scan.  
yellow  
Progressive Scan Output (480p)  
Consumers should note that not all high definition television  
sets are fully compatible with this product and may cause  
artifacts to be displayed in the picture. If you experience 480p  
progressive scan picture problems, it is recommended that the  
user switch the connection to the standard definitionoutput. If  
there are questions regarding our TV set compatibility with this  
model, please contact our customer service center at 1-800-  
SAMSUNG.  
The VHF/UHF RF OUT jack of this product sends only signals  
received through the antenna. It does not output audio/video  
signals. You must use one of the following audio/video  
connections on this unit.  
20 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Method 2 : Connecting to an  
S-Video input jack  
Method 3 : Connecting to  
Component video input  
B
R
jacks(Y,P ,P )  
Connect an S-Video cable(not supplied) between the S-  
VIDEO OUT jack on TWIN TRAY DVD RECORDER  
and S-VIDEO IN jack on your TV (or AV amplifier).  
1. Connect Component video cables(not supplied)  
between the COMPONENT OUT(Y,P ,P ) jacks on  
TWIN TRAY DVD RECORDER and COMPONENT  
IN(Y,P ,P ) jacks on your TV.  
B
R
You will enjoy high quality images. S-Video separates  
the picture element into black and white (Y) and color  
(C) signals to present clearer images than regular  
video input mode.  
B
R
2. Connect audio cables (white and red) between the  
AUDIO OUT jacks on the TWIN TRAY DVD  
RECORDER and AUDIO IN jacks on TV (or AV  
amplifier). (See pages 22~23).  
Connect audio cables(white and red) between the  
AUDIO OUT jacks on the TWIN TRAY DVD  
RECORDER and AUDIO IN jacks on TV(or AV  
amplifier).  
3. After connecting, refer to the pages 37 to 38.  
(See pages 22~23)  
You will enjoy high quality and accurate color  
reproduction images.  
ꢀꢀ  
Make sure that the color coded  
B
R
connections match. The Y, P , P  
NOTE  
component output jacks of your TWIN  
TRAY DVD RECORDER must be  
connected to the exact corresponding  
component input jacks on your TV.  
English - 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Method 2 : Connecting to a stereo  
amplifier with analog input jacks  
Step 3 : Connecting the Audio  
cable  
If your stereo amplifier only has AUDIO INPUT jacks  
(L and R), use the AUDIO OUT jacks.  
There are several ways to connect your TWIN TRAY  
DVD RECORDER. Select the audio connection that  
best suits you below.  
Method 1 : Connecting to your TV  
Method 2 : Connecting to a stereo amplifier (analog audio out)  
Method 3 : Connecting to an AV amplifier with a digital input jack  
Manufactured under license from Dolby  
Laboratories. Dolbyand the double-D symbol  
are trademarks of Dolby Laboratories.  
white  
red  
DTSand DTS Digital Outare trademarks of  
Digital Theater Systems, Inc.  
red  
white  
Method 1 : Connecting to your TV  
This connection will use your TVs speakers.  
Front(R)  
speaker  
Front(L)  
speaker  
white  
red  
white  
red  
22 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Method 3: Connecting to an AV  
amplifier with a digital input jack  
Step 4 : Connecting External  
devices  
If your AV amplifier has a Dolby Digital or DTS decoder  
and a digital input jack, use this connection. To enjoy  
Dolby Digital or DTS sound, you will need to set up the  
audio settings. (See page 36)  
This allows you to connect your TWIN TRAY DVD  
RECORDER to other external devices and view or  
record their outputs.  
Method 1 : Connecting a VCR, Set-Top Box(STB) or DVD player  
to the AV 1 IN jacks  
Method 2 : Connecting a Camcorder to the AV 2 IN jacks  
Method 3 : Connecting a Camcorder to the DV IN jack  
Method 1 : Connecting a VCR, Set-  
Top Box(STB) or DVD player to the  
AV 1 IN jacks  
Connecting a VCR or external device to AUDIO/VIDEO  
AV 1 IN jacks of the TWIN TRAY DVD RECORDER.  
You can record from connected equipment (VCR, STB  
or DVD).  
Rear(L)  
Rear(R)  
Front(L)  
Front(R)  
Subwoofer Center  
or  
ꢀꢀ  
You can also use the AV 2 IN jacks on  
the front panel of the TWIN TRAY DVD  
RECORDER.  
NOTE  
ꢀꢀ  
You must choose S-Video or Composite  
in setup menu (See page 38).  
ꢀꢀ  
Copy protected content cannot be  
recorded.  
English - 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Method 2 : Connecting a  
Camcorder to the AV 2 IN jacks  
Step 5 : Connecting the  
Power Cord  
You can also use the AV 2 IN jacks on the front panel of  
the TWIN TRAY DVD RECORDER. You can record  
from connected equipment, such as a camcorder.  
When an input source (such as a camcorder) is inserted  
into AV 2 IN while viewing TV, the input will be switched  
to AV 2 IN automatically. If the input is not selected  
automatically, press the INPUT button to select proper  
input.  
After all connections are complete, plug the power cord  
in the wall outlet.  
“Auto” appears in the panel display. This means  
that the current time is being set automatically  
(Auto Program) through the antenna under  
connection and also the channel is being set.  
The setup may take a few minutes.  
When the TWIN TRAY DVD RECORDER operates  
normally, the current time is automatically set and  
displayed in the front panel display.  
ꢀꢀ  
After the current time is set automatically,  
the TWIN TRAY DVD RECORDER will  
NOTE  
perform Auto Channel Memory for about  
3 minutes. If power is on, while Auto  
Channel Memory is in process, Auto  
Channel Memory will stop. In this case,  
do Auto Channel Memory from MENU  
(See page 29).  
Method 3 : Connecting a  
Camcorder to the DV IN jack  
If your camcorder has a DV output jack, connect it to the  
DV input jack of your TWIN TRAY DVD RECORDER.  
ꢀꢀ  
The input setting will automatically  
change to DV when the camcorder is  
connected and powered on.  
NOTE  
24 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Menu  
Navigation  
System Setup  
The on-screen menus allow you to enable or disable  
various functions on your TWIN TRAY DVD  
RECORDER.  
Use the following buttons to open and navigate  
through the on-screen menus.  
Setup  
No Disc  
System  
Title  
Language  
Audio  
Music  
Video  
Photo  
Parental Control  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
MENU Button  
Press this button on the remote control to open  
the on-screen menu.  
Press again to exit the on-screen menu.  
1
2
On-Screen Menu Navigation . . . . . . . . . . . . . . . . . . .25  
OSD Language Setup . . . . . . . . . . . . . . . . . . . . . . . .26  
Auto Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . . .29  
Manual Channel Set . . . . . . . . . . . . . . . . . . . . . . . . .30  
Auto Power Off Setting . . . . . . . . . . . . . . . . . . . . . . .31  
CM Skip Time Setting . . . . . . . . . . . . . . . . . . . . . . . .31  
EP Mode Time Setting . . . . . . . . . . . . . . . . . . . . . . .32  
Setting up the Front Display Options . . . . . . . . . . . .33  
Automatic Chapter Creator . . . . . . . . . . . . . . . . . . . .34  
Setting up the Language Options . . . . . . . . . . . . . . .35  
Setting up the Audio Options . . . . . . . . . . . . . . . . . . .36  
Setting up the Video display Options . . . . . . . . . . . .37  
Setting up the Progressive scan . . . . . . . . . . . . . . . .38  
Canceling the Progressive scan . . . . . . . . . . . . . . . .39  
Setting up the Parental Control . . . . . . . . . . . . . . . . .40  
…†, œ √ Buttons  
Press these buttons on remote control to move  
the selection bar …†, œ √ to cycle through the  
menu options.  
ENTER Button  
Press this button on the remote control to confirm any  
new settings.  
3
4
RETURN Button  
Press this button on the remote control to return to  
the Previous menu screen displayed or to exit the  
on-screen menu.  
English - 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Clock Set  
OSD Language Setup  
After plugging in the TWIN TRAY DVD RECORDER,  
the first time you press the POWER button, this screen  
comes up.  
This menu is used to set the current time.  
You need to set the time to use timer recording.  
(This screen will only appear when you plug in the  
TWIN TRAY DVD RECORDER for the first time.)  
With the unit in Stop mode / No Disc mode, press  
1
the MENU button.  
Press the DVD POWER button.  
1
Title  
No Disc  
Title  
Press ENTER or Right button  
for Title List.  
Press a number button to select the desired  
Music  
2
language.  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
Press  
Touche  
Pulse  
1
2
3
for English  
pour Français  
para Español  
Press the …† buttons to select Setup, then press  
2
3
the ENTER or button.  
Setup  
No Disc  
System  
Title  
Language  
Audio  
Music  
Video  
Photo  
If the language for the startup screen is not  
set, the settings may change whenever you  
turn the power on or off. Therefore, make  
sure that you select the language you  
want to use.  
Parental Control  
Timer Record  
Setup  
NOTE  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select System, then  
press the ENTER or button.  
• System menu will be displayed.  
System  
No Disc  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15 Sec  
Photo  
EP Mode Time : 6 Hour  
Front Display  
: Auto Dim  
Timer Record  
Setup  
Chapter Creator : Off  
MOVE  
SELECT  
RETURN  
EXIT  
26 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock Data CH  
Select a channel that carries a time signal using the  
Press the …† buttons to select Clock Set, then  
4
press the ENTER or button.  
…† buttons, then press the ENTER button.  
• Select Auto to set the clock data channel  
automatically.  
Clock Set  
No Disc  
Auto Clock Set  
Title  
Clock Data CH  
Manual Clock Set  
No Disc  
Music  
Title  
Photo  
Select channel :  
Auto  
Music  
Timer Record  
Setup  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select Auto Clock Set,  
5
6
then press the ENTER or button.  
Time Zone  
Select the time zone of your area using the …†  
buttons then press the ENTER or button.  
• Select Automatic to set the time zone  
automatically.  
Press the …† buttons to select On, then press  
the ENTER or button.  
Auto Clock Set  
No Disc  
Auto Clock Set  
Clock Data CH  
Time Zone  
Off  
Title  
Auto Clock Set  
On  
No Disc  
Music  
: Automatic  
: Automatic  
Automatic  
Auto Clock Set  
Clock Data CH  
Time Zone  
Title  
Daylight Saving  
Photo  
Atlantic  
Eastern  
Music  
Timer Record  
Setup  
Central  
Daylight Saving  
Photo  
Mountain  
Pacific  
Alaska  
Hawaii  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
ꢀꢀ  
If your clock is set to the wrong time zone  
or daylight saving, you can adjust these  
settings without turning off the Auto Clock  
Set function.  
NOTE  
Daylight Saving  
Select Automatic, No or Yes using the …† buttons  
then press the ENTER or button.  
• Select Automatic to set the daylight saving  
automatically.  
Select the sub menu(Clock Data CH, Time Zone  
or Daylight Saving) using the …† buttons, then  
press the ENTER or button.  
7
Auto Clock Set  
No Disc  
Auto Clock Set  
Clock Data CH  
Time Zone  
: On  
Title  
: Automatic  
: Automatic  
Music  
Auto Clock Set  
Daylight Saving  
Automatic  
Photo  
No Disc  
No  
Auto Clock Set  
Clock Data CH  
Time Zone  
: On  
Title  
Timer Record  
Setup  
Yes  
: Automatic  
: Automatic  
: Automatic  
Music  
Daylight Saving  
Photo  
MOVE  
SELECT  
RETURN  
EXIT  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
English - 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select Manual Clock  
Set, then press the ENTER or button.  
Manual Clock Set  
5
6
Manual Clock Set  
No Disc  
Title  
Date  
Time  
If your clock cannot be set automatically, set the clock  
manually.  
Music  
JAN / 01 / 2005 SAT 12 : 00 AM  
Photo  
Timer Record  
Setup  
0~9 NUMBER  
SELECT  
RETURN  
EXIT  
With the unit in Stop mode / No Disc mode, press  
1
2
the MENU button.  
Use the …†œ √ buttons to select the Current  
Date and Current Time, and then press the  
ENTER button.  
When the current time is stored in memory and  
then the set is powered off, the current time will  
appear in the front panel display.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
Setup  
No Disc  
System  
Title  
Language  
Audio  
Music  
Video  
…† : Sets the value  
Photo  
Parental Control  
You can set the value using the number  
buttons.  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
œ √: Moves to items  
Press the …† buttons to select System, then  
press the ENTER or button.  
• System menu will be displayed.  
3
4
System  
No Disc  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15 Sec  
Photo  
EP Mode Time : 6 Hour  
Front Display  
: Auto Dim  
Timer Record  
Setup  
Chapter Creator : Off  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select Clock Set, then  
press the ENTER or button.  
Clock Set  
No Disc  
Auto Clock Set  
Title  
Manual Clock Set  
Music  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
28 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select Channel Set,  
then press the ENTER or button.  
Auto Channel Memory  
4
5
Channel Set  
No Disc  
Antenna/Cable TV : Cable TV  
Auto Channel Memory  
Title  
You can set the Antenna/Cable TV settings  
automatically.  
Music  
Channel Add/Delete  
Photo  
Timer Record  
Setup  
With the unit in Stop mode / No Disc mode, press  
MOVE  
SELECT  
RETURN  
EXIT  
1
2
the MENU button.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
Press the …† buttons to select Antenna/Cable  
TV, then press the ENTER or button.  
Setup  
Channel Set  
No Disc  
No Disc  
System  
Title  
Antenna/Cable TV 
Antenna  
Title  
Language  
Audio  
Music  
Auto Channel Memor
Cable TV  
Music  
Channel Add/Delete  
Video  
Photo  
Parental Control  
Photo  
Timer Record  
Setup  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Select the item that matches the antenna  
connection you selected on pages 18~19(Method  
1, 2 and 3).  
Press the …† buttons to select System, then  
press the ENTER or button.  
• System menu will be displayed.  
3
Select Antenna or Cable TV(depending on the  
hookup you chose) using the …† buttons, then  
press the ENTER or button.  
6
7
System  
No Disc  
Clock Set  
Title  
Channel Set  
Select Auto Channel Memory using the …†  
buttons, then press the ENTER or button.  
Auto Channel Memory will be performed.  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15 Sec  
Photo  
EP Mode Time : 6 Hour  
Front Display  
: Auto Dim  
Timer Record  
Setup  
Chapter Creator : Off  
Auto Channel Memory  
No Disc  
MOVE  
SELECT  
RETURN  
EXIT  
Title  
Total channel numbers:  
Saved channel :  
15/125  
Music  
11%  
Photo  
Scanning...  
Stop  
Timer Record  
Setup  
SELECT  
RETURN  
EXIT  
ꢀꢀ  
Press the RETURN or ENTER button to  
stop Auto Channel Memory.  
NOTE  
English - 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select Channel  
Add/Delete, then press the ENTER or button.  
Manual Channel Set  
5
6
Channel Add/Delete  
No Disc  
Title  
Select channel :  
Add  
01  
Music  
Photo  
Manual Channel Set can be used after you have first  
performed Auto Channel Memory. Use the Manual  
Channel Setting to delete unnecessary channels after  
using the Auto Channel Memory.  
Delete  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
With the unit in Stop mode / No Disc mode, press  
Press the …† or number buttons to select the  
channels you want to add or delete on the Select  
channel screen. Then, press the ENTER button.  
1
2
the MENU button.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
Channel Add/Delete  
No Disc  
Title  
Select channel :  
02  
Music  
Setup  
Channel is added.  
Photo  
No Disc  
Add  
Delete  
Timer Record  
Setup  
System  
Title  
Language  
Audio  
Music  
Video  
MOVE  
SELECT  
RETURN  
EXIT  
Photo  
Parental Control  
Timer Record  
Setup  
• Using …† buttons for channel selection allows  
MOVE  
SELECT  
RETURN  
EXIT  
the user to add/delete one channel at a time.  
• Using CH (  
) buttons for channel selection  
jumps to the next channel memorized in Auto  
Channel Memory.  
Press the …† buttons to select System, then  
press the ENTER or button.  
3
4
• System menu will be displayed.  
Press the œ √ buttons to select Add or Delete,  
then press the ENTER button.  
7
• The message “Channel is added.” or “Channel is  
deleted.” will be displayed in the center of the  
screen.  
System  
No Disc  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
• Continue to add or delete as many channels as  
you want to memorize or delete. This can be  
used to add channels not stored automatically  
due to weak signal strength.  
CM Skip Time  
: 15 Sec  
Photo  
EP Mode Time : 6 Hour  
Front Display  
: Auto Dim  
Timer Record  
Setup  
Chapter Creator : Off  
MOVE  
SELECT  
RETURN  
EXIT  
• Press the RETURN button to return to the  
previous menu. Press the MENU button to exit  
the menu.  
Press the …† buttons to select Channel Set,  
then press the ENTER or button.  
Channel Set  
No Disc  
Antenna/Cable TV : Cable TV  
Auto Channel Memory  
Title  
Music  
Channel Add/Delete  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
30 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select the desired item,  
then press the ENTER or button.  
Auto Power Off Setting  
5
Off : Auto power off is disabled.  
2 Hour : TWIN TRAY DVD RECORDER will  
automatically turn off 2 hours after the  
last button is pressed.  
This feature automatically turns off your TWIN TRAY  
DVD RECORDER, if you do not press any button for  
the selected time.  
6 Hour : TWIN TRAY DVD RECORDER will  
automatically turn off 6 hours after the  
last button is pressed.  
If turn off time set by automatic Power off function  
is reached during playback or recording, the  
device will operate until the playback or recording  
is over.  
With the unit in Stop mode / No Disc mode, press  
the MENU button.  
1
2
Press the …† buttons to select Setup, then press  
the ENTER or button.  
Setup  
No Disc  
CM Skip Time Setting  
System  
Title  
Language  
Audio  
Music  
Video  
Photo  
Parental Control  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
When a program recorded on a DVD-RAM, a DVD-RW,  
or a DVD-R is played, the unit can be set to automatically  
skip a portion of the program corresponding to a CM  
(commercial) skip time set by the user.  
Press the …† buttons to select System,  
3
4
then press the ENTER or button.  
System menu will be displayed.  
With the unit in Stop mode / No Disc mode, press  
the MENU button.  
1
2
System  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
No Disc  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15 Sec  
Photo  
Setup  
EP Mode Time : 6 Hour  
No Disc  
Front Display  
: Auto Dim  
Timer Record  
Setup  
Chapter Creator : Off  
System  
Title  
Language  
Audio  
Music  
MOVE  
SELECT  
RETURN  
EXIT  
Video  
Photo  
Parental Control  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select Auto Power Off,  
then press the ENTER or button.  
System  
No Disc  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off :
Off  
CM Skip Time  
:
2 Hour  
Photo  
EP Mode Time :
6 Hour  
Front Display  
: Auto Dim  
Timer Record  
Setup  
Chapter Creator : Off  
MOVE  
SELECT  
RETURN  
EXIT  
English - 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
ꢀꢀ  
CM Skip can be performed only during  
normal playback.  
Press the …† buttons to select System, then  
press the ENTER or button.  
System menu will be displayed.  
NOTE  
3
4
When the time set is more than the  
remaining time of a current title: The next  
title is played from the beginning.  
System  
No Disc  
ꢀꢀ  
When the time set is more than a  
remaining time of a play list, the next  
scene is played.  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15 Sec  
Photo  
EP Mode Time : 6 Hour  
Front Display  
: Auto Dim  
ꢀꢀ  
ꢀꢀ  
Timer Record  
Setup  
CM Skip does not work in a still picture  
mode.  
Chapter Creator : Off  
MOVE  
SELECT  
RETURN  
EXIT  
When a set time is less than the  
remaining time of a scene, the last title,  
or the last track that is displayed  
currently, a prohibition mark appears.  
Press the …† buttons to select CM Skip Time,  
then press the ENTER or button.  
ꢀꢀ  
ꢀꢀ  
CM Skip releases Repeat (including  
Repeat A-B, Chapter, and Title).  
CM Skip may not operate with some  
DVD-Video discs.  
System  
No Disc  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15Sec  
Photo  
EP Mode Time : 30Sec  
Front Display  
: 60Sec
Timer Record  
Setup  
Chapter Creator : Off  
MOVE  
SELECT  
RETURN  
EXIT  
EP Mode Time Setting  
Press the …† buttons to select the desired time  
interval, then press the ENTER or button.  
5
6
If you press the CM SKIP button during playback,  
the section corresponding to the set time is  
skipped, and then the next section is played.  
You can select one of four recording modes by pressing  
the REC MODE button repeatedly.  
EP mode is one of four REC modes (XP, SP, LP, EP)  
In EP(Extended Play) mode, you can set recording time  
to 6 or 8 hours.  
With the unit in Stop mode / No Disc mode, press  
1
2
the MENU button.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
Setup  
No Disc  
System  
Title  
Language  
Audio  
Music  
Video  
Photo  
Parental Control  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
32 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select System, then  
press the ENTER or button.  
System menu will be displayed.  
Setting up the Front  
Display Options  
3
4
5
System  
No Disc  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
You can adjust the brightness of the unit’s front panel  
display.  
CM Skip Time  
: 15 Sec  
Photo  
EP Mode Time : 6 Hour  
Front Display  
: Auto Dim  
Timer Record  
Setup  
Chapter Creator : Off  
With the unit in Stop mode / No Disc mode, press  
MOVE  
SELECT  
RETURN  
EXIT  
1
2
the MENU button.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
Press the …† buttons to select EP Mode Time,  
then press the ENTER or button.  
Setup  
No Disc  
System  
System  
Title  
Language  
Audio  
No Disc  
Music  
Clock Set  
Title  
Video  
Channel Set  
Photo  
Parental Control  
Music  
Auto Power Off : Off  
Timer Record  
Setup  
CM Skip Time  
: 15 Sec  
Photo  
EP Mode Time :
6 Hour  
Front Display  
:
Timer Record  
Setup  
8 Hour  
MOVE  
SELECT  
RETURN  
EXIT  
Chapter Creator : Off  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select System, then  
press the ENTER or button.  
System menu will be displayed.  
3
Press the …† buttons to select the desired time,  
then press the ENTER or button.  
System  
No Disc  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15 Sec  
Photo  
EP Mode Time : 6 Hour  
Front Display  
: Auto Dim  
Timer Record  
Setup  
Chapter Creator : Off  
MOVE  
SELECT  
RETURN  
EXIT  
English - 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select Front Display,  
then press the ENTER or button.  
Press the …† buttons to select System, then  
press the ENTER or button.  
System menu will be displayed.  
4
3
System  
System  
No Disc  
DVD-RW(V)  
Clock Set  
Title  
Clock Set  
Channel Set  
Title  
Music  
Channel Set  
Auto Power Off : Off  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15 Sec  
Photo  
CM Skip Time  
: 15 Sec  
EP Mode Time : 6 Hour  
Bright  
Photo  
EP Mode Time : 6 Hour  
Front Display  
:
Timer Record  
Setup  
Front Display  
: Auto Dim  
Dim  
Chapter Creator :
Timer Record  
Setup  
Chapter Creator : Off  
Auto Dim  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
ꢀꢀ  
V mode allows you to make a disc that  
will play in all DVD players.  
VR mode only allows playback on DVD  
recorders.  
Press the …† buttons to select the desired item,  
then press the ENTER or button.  
Bright : Makes the Front Panel Display bright.  
Dim : Makes the Front Panel Display dim.  
Auto Dim : Makes the Front Panel Display dim  
automatically when the set is  
5
NOTE  
powered off.  
Press the …† buttons to select Chapter Creator,  
4
then press the ENTER or button.  
System  
DVD-RW(V)  
Clock Set  
Title  
Channel Set  
Music  
Auto Power Off : Off  
CM Skip Time  
: 15 Sec  
Automatic Chapter  
Creator  
Photo  
EP Mode Time : 6 Hour  
Off  
:
Front Display  
Timer Record  
Setup  
Chapter Creator : On  
MOVE  
SELECT  
RETURN  
EXIT  
A DVD-Video consists of ‘Titles’ and ‘Chapters’. When  
you record one program, it makes one Title.  
If you use this function, the Title will be divided into  
Chapters.  
Press the …† buttons to select Off or On, then  
press the ENTER or button.  
5
6
Off: Select this option when you do not want  
Automatic Chapter Creator.  
On: Select this option when you want Automatic  
Chapter Creator.  
(V mode)  
Press the MENU button to exit the menu.  
With the unit in Stop mode / No Disc mode, press  
1
2
the MENU button.  
Press the REC button to start recording. (See  
pages 73~74 to set the recording speed) The  
message “Do you want to create the chapter  
menu after this recording?” is displayed.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
Title  
DVD-RW(V)  
Title  
Press ENTER or Right button  
for Title List.  
Music  
Do you want to create the chapter menu  
after this recording?  
Photo  
Timer Record  
Setup  
No  
Yes  
MOVE  
SELECT  
RETURN  
EXIT  
34 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the œ √ buttons to select Yes and press  
the ENTER button.  
• A new chapter is created according to the selected  
recording mode. A chapter will be about 5 minutes  
long in XP and SP, and about 15 minutes long in LP  
and EP mode.  
Setting up the Language  
Options  
7
If you set the On-Screen menu, disc menu, audio and  
subtitle language in advance, they will come up  
automatically every time you watch a movie.  
If the selected language is not recorded on the disc, the  
original pre-recorded language is selected.  
Press the STOP button to stop recording.  
8
9
To display the created titles, finalize the disc  
(See pages 106~107) and then press the TITLE  
MENU button. Title menu will be displayed.  
With the unit in Stop mode / No Disc mode, press  
1
the MENU button.  
Press the …† buttons to select Setup, then press  
2
the ENTER or  
button.  
Setup  
No Disc  
Title  
System  
Language  
Audio  
Previous  
Top  
Next  
Music  
Photo  
Video  
Parental Control  
Timer Record  
Setup  
To display the created chapters, select the  
desired Title and then press the DISC MENU  
button. The chapter menu for the selected Title  
will be displayed.  
MOVE  
SELECT  
RETURN  
EXIT  
10  
Press the …† buttons to select Language, then  
press the ENTER or button.  
Language setup menu will be displayed.  
CHAPTER  
3
Language  
No Disc  
Audio  
: Original  
: Automatic  
: English  
: English  
Title  
Subtitle  
Music  
Disc Menu  
On-Screen menu  
Previous  
Top  
Next  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
The Automatic Chapter Creator function does  
not work during Timer Recording or when you  
turn the power off.  
Caution  
The Automatic chapter creator function may  
not operate depending on the status of  
recording.  
English - 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select the desired  
language option, press the ENTER or button.  
Setting up the Audio  
Options  
4
Language  
No Disc  
Original  
Audio  
Title  
You can connect the TWIN TRAY DVD RECORDER to  
an external amp or Home theater.  
The following allows you to setup the Audio device and  
sound status depending on the audio system in use.  
English  
Subtitle  
Music  
Français  
Disc Menu  
On-Screen men
Deutsch  
Photo  
Español  
Italiano  
Timer Record  
Setup  
Nederlands  
Korean  
MOVE  
SELECT  
RETURN  
EXIT  
With the unit in Stop mode / No Disc mode, press  
1
2
the MENU button.  
• Audio : For the disc audio language.  
• Subtitle : For the disc subtitles.  
• Disc Menu: For the disc menu contained on the  
disc.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
• On-Screen Menu: For the on-screen menu of your  
TWIN TRAY DVD RECORDER  
.
Setup  
No Disc  
System  
Title  
Language  
Audio  
Press the …† buttons to select the desired  
language, then press the ENTER or button.  
Music  
5
Video  
Photo  
Parental Control  
Install  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
ꢀꢀ  
Press the RETURN or œ button to return  
to the previous menu. Press the MENU  
button to exit the menu.  
Press the …† buttons to select Audio, then press  
the ENTER or button.  
Audio setup menu will be displayed.  
NOTE  
3
ꢀꢀ  
The selected language will only appear if  
it is supported on the disc.  
Audio  
No Disc  
Digital Output  
DTS  
: PCM  
: Off  
Title  
Music  
Dynamic Compression : On  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select the desired audio  
4
5
option, then press the ENTER or button.  
Press the …† buttons to select the desired item,  
then press the ENTER or button.  
ꢀꢀ  
Press the RETURN or œ button to return  
to the previous menu.  
NOTE  
Press the MENU button to exit the menu.  
36 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Output  
Setting up the Video  
display Options  
1. PCM : Select this when your equipment is not  
Dolby digital compatible.  
2. Bitstream : Outputs Dolby Digital (or MPEG-2)  
audio as bitstream. Select this  
when your AV receiver or AV  
amplifier has a Dolby Digital (or  
MPEG-2) Decoder.  
This function allows you to set up the TV screen  
settings. This function depends on disc type. It may  
not work for some disc types.  
ꢀꢀ  
Digital output setting is equally applied to  
both Dolby Digital and MPEG-2 audio.  
NOTE  
LPCM sound track is always output as  
PCM. It cannot be changed with the  
Digital Output setting.  
With the unit in Stop mode / No Disc mode, press  
1
2
the MENU button.  
ꢀꢀ  
Be sure to select the correct Digital  
Output or you will hear no sound or a  
loud noise.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
Setup  
No Disc  
DTS  
System  
Title  
Language  
Audio  
Music  
Video  
1. Off : Doesn’t output DTS signal. Select this  
when your AV receiver or AV amplifier  
does not have a DTS decoder.  
Photo  
Parental Control  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
2. On : Outputs DTS Bitstream via the digital  
output when you play DTS track. Select  
this only when your AV receiver (or AV  
amplifier) has a DTS decoder.  
Press the …† buttons to select Video, then press  
3
4
the ENTER or button  
Video setup menu will be displayed.  
.
ꢀꢀ  
When DTS soundtrack is played, sound  
is not output from the AV Audio Output.  
It only outputs from the Digital Audio Out.  
NOTE  
Video  
No Disc  
TV Aspect  
Input Level  
Black Level  
: 16:9 Wide  
: Lighter  
: 0 IRE  
Title  
Music  
3D Noise Reduction : Off  
AV1 Video Input : CVBS  
Photo  
Dynamic Compression  
This is only active when a Dolby Digital signal is  
detected.  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
1. On : When Movie soundtracks are played at  
low volume or from smaller speakers, the  
system can apply appropriate  
Press the …† buttons to select the desired video  
option, then press the ENTER or button  
.
compression to make low-level content  
more intelligible and prevent dramatic  
passages from getting too loud.  
Video  
No Disc  
2. Off : You can enjoy the movie with the  
standard Dynamic Range.  
TV Aspect  
Input Level  
Black Level  
4:3 Letter Box  
Title  
4:3 Pan/Scan  
Music  
16:9 Wide  
3D Noise Reduction : Off  
AV1 Video Input : CVBS  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
English - 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3D Noise Reduction (motion  
adaptive noise reduction)  
Press the …† buttons to select the desired item,  
then press the ENTER or button.  
5
1. Off : Normal  
2. On : Provides a cleaner picture through noise  
reduction (for recording).  
ꢀꢀ  
Press the RETURN or œ button to return  
to the previous menu.  
AV1 VIDEO Input  
NOTE  
Press the MENU button to exit the menu.  
1. Composite:AV1 Video Input is Composite.  
2. S-Video:AV1 Video Input is S-Video.  
TV Aspect  
Depending on the type of television you have,  
you may want to adjust the screen setting.  
(aspect ratio)  
ꢀꢀ  
Set the AV1 Video input setting to  
correspond to the input source.  
NOTE  
1. 4:3 Letter Box : Select  
when you want to see the  
total 16:9 ratio screen the  
DVD supplies, even  
though you have a TV  
with a 4:3 ratio screen.  
Black bars will appear at  
the top and bottom of the screen.  
Setting up the  
Progressive scan  
2. 4:3 Pan/Scan : Select  
this for conventional size  
TV when you want to see  
the central portion of the  
16:9 screen. (Extreme left  
and right side of movie  
picture will be cut off.)  
If the TV supports Progressive Scan, press the P.SCAN  
button on the front of the TWIN TRAY DVD RECORDER  
to enjoy. If you select ‘progressive scan mode’, the  
component cable has to be connected at first. (See  
page 21)  
3. 16:9 Wide : You can view  
the full 16:9 picture on  
your widescreen TV.  
Be sure the Component cables are connected properly.  
Input Level  
Adjusts the level of the input signal.  
With the unit in Stop mode / No Disc mode, press the  
P.SCAN button on the front of the TWIN TRAY DVD  
RECORDER.  
The message “Press [Yes] to confirm Progressive  
scan mode. Otherwise, press [No].” will appear.  
Press the œ √ buttons to select Yes, and then  
press the ENTER button.  
1
1. Darker : If you feel the screen is too light and  
you want to make the sceen darker.  
2. Lighter : If you feel the screen is too dark and  
you want to make the sceen lighter.  
Black Level  
Adjusts the black level of the screen.  
Press [Yes] to confirm Progressive scan mode.  
Otherwise, press [No].  
1. 0 IRE : This is the standard NTSC reference  
black level for consistent brightness/  
contrast across all sources.  
Yes  
No  
Select this when you want darker  
screen.  
2. 7.5 IRE : This will enhance the black level for  
increased brightness/contrast when  
viewing DVDs. Select this when you  
want lighter screen.  
38 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The message “Please, set your TV to Progressive  
input. To deactivate, press [STOP] key.” will  
appear. Press the ENTER button.  
Canceling the  
Progressive scan  
2
3
With the unit in Stop mode / No Disc mode, press the  
Please, set your TV to Progressive input,  
To deactivate, press [STOP] key.  
1
P.SCAN button on the front of the TWIN TRAY DVD  
RECORDER.  
The message “Press [Yes] to confirm Interlace  
scan mode. Otherwise, press [No].” will appear.  
Press the œ √ buttons to select Yes, and then  
press the ENTER button.  
OK  
The message “Video Output Mode Progressive  
Scan” will appear.  
Press [Yes] to confirm Interlace scan mode.  
Otherwise, press [No].  
Yes  
No  
Video Output Mode  
Progressive Scan  
The message “Please, set your TV to Interlace  
input. To deactivate, press [STOP] key.” will  
appear. Press the ENTER button.  
2
3
ꢀꢀ  
If the P.SCAN button on the TWIN TRAY  
DVD RECORDER’s front panel is  
pressed during playback, the message  
“This function is possible only on stop  
mode” appears on the screen.  
NOTE  
Please, set your TV to Interlace input,  
To deactivate, press [STOP] key.  
OK  
ꢀꢀ  
Progressive setting is only available when  
the TWIN TRAY DVD RECORDER is in  
stop mode.  
The message “Video Output Mode Interlace Scan”  
will appear and the Progressive Scan mode will be  
canceled.  
Video Output Mode  
Interlace Scan  
English - 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
ꢀꢀ  
Do not press the P.SCAN button if you are  
using a TV that does not support Progressive  
mode. Nothing will be displayed on the screen  
if pressed.  
Enter the 4-digit password using the number  
buttons on the remote control.  
The“Confirm the password” message will be  
displayed. Enter your password again.  
NOTE  
4
5
If you press the P.SCAN button by mistake  
when your TV does not support Progressive  
mode, you need to release the Progressive  
mode. To release the Progressive mode,  
press the P.SCAN button on the front panel  
3 times. The screen will recover after the  
Parental Control  
No Disc  
Title  
Confirm the password  
Music  
Photo  
PS  
indicator on the front panel display  
Timer Record  
Setup  
turns off.  
0~9 NUMBER  
SELECT  
RETURN  
EXIT  
Press the ENTER or button to select Password.  
Setting up the Parental  
Control  
Parental Control  
No Disc  
Password  
Off  
Title  
On  
Music  
The Parental Control function works in conjunction with  
DVDs that have been assigned a rating which helps you  
control the types of DVDs that your family watches.  
There are up to 8 rating levels on a disc.  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select On or Off, then  
With the unit in Stop mode / No Disc mode, press  
6
press the ENTER or button.  
1
2
the MENU button.  
Press the …† buttons to select Setup, then press  
the ENTER or button.  
ꢀꢀ  
Press the RETURN or œ button to return  
to the previous menu.  
Press the MENU button to exit the menu.  
NOTE  
Setup  
No Disc  
System  
Title  
Language  
Audio  
Music  
Video  
Photo  
Parental Control  
Timer Record  
Setup  
If you forgot your password  
MOVE  
SELECT  
RETURN  
EXIT  
Remove all discs and set the unit to P(Play) mode.  
1
2
Press the …† buttons to select Parental Control,  
then press the ENTER or button.  
3
Press and hold the Forward Skip (  
) button on  
Parental Control  
the front panel for 5 seconds or more.  
No Disc  
Title  
Create the password  
Music  
Photo  
Timer Record  
Setup  
0~9 NUMBER  
SELECT  
RETURN  
EXIT  
40 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the Rating Level  
About the Change Password  
Press the …† buttons to select Rating Level,  
Press the …† buttons to select Change Password,  
1
then press the ENTER or button.  
1
then press the ENTER or button.  
Parental Control  
No Disc  
Parental Control  
Password  
: On  
: Level 1-Kids  
Title  
No Disc  
Rating Level  
Password  
: On  
: Level 8 (Adults)  
Title  
Music  
Change Password  
Rating Level  
Music  
Photo  
Change Password  
Photo  
Timer Record  
Setup  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Parental Control  
No Disc  
Change Password  
Level 8-Adults  
:
Password  
No Disc  
Title  
Level 7  
Rating Level  
:
Level 6  
Title  
Music  
Enter the password  
Change Password  
Level 5  
Music  
Photo  
Level 4  
Photo  
Level 3  
Timer Record  
Setup  
Level 2  
Timer Record  
Setup  
Level 1-Kids  
MOVE  
SELECT  
RETURN  
EXIT  
0~9 NUMBER  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select the rating level  
Enter the 4-digit password using the number  
buttons on the remote control.  
2
3
you want, then press the ENTER or button.  
2
The “Confirm the password” message will be displayed.  
When you operate your TWIN TRAY DVD  
RECORDER for the first time, the “Create the  
Password” message will be displayed.  
For example, if you select up to Level 6, discs that  
contain Level 7, 8 will not play. A larger number  
indicates that the program is intended for adult  
use only.  
Change Password  
No Disc  
Title  
Confirm the password  
Music  
Photo  
Timer Record  
Setup  
0~9 NUMBER  
SELECT  
RETURN  
EXIT  
Enter your password again using the number  
buttons on the remote control.  
3
ꢀꢀ  
See page 40 if you forgot your password.  
NOTE  
English - 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Playing  
Playback  
Read the following information before playing a disc.  
This section introduces basic functions of  
playback and playback by disc type.  
Region code (DVD-Video only)  
Both the DVD RECORDER and the discs are coded by  
region. These regional codes must match in order for the disc  
to play. If the codes do not match, the disc will not play. The  
Region Number for this DVD RECORDER is described on the  
rear panel of the DVD RECORDER.  
Dolby Digital  
Stereo  
DTS  
Digital Audio  
MP3  
Disc types that can be played  
Disc Types  
Disc Logo Recorded content  
Disc Shape  
Max. Playing Time  
NTSC broadcast  
system in U.S.A,  
Canada, Korea,  
Japan,etc.  
Single sided(5”)  
Double sided(5”)  
Single sided(3.5”)  
Double sided(3.5”)  
Single sided(5”)  
Single sided(3.5”)  
240  
480  
80  
160  
74  
DVD-VIDEO  
AUDIO + VIDEO  
AUDIO-CD  
DVD-RAM  
AUDIO  
20  
1 (XP: Excellent Quality)  
2 (SP: Standard Quality)  
4 (LP: Long Playback)  
6 or 8 (EP:Extended)  
2 (XP: Excellent Quality)  
Single-sided  
5” (4.7GB)  
AUDIO + VIDEO  
Double-sided 4 (SP: Standard Quality)  
5” (9.4GB)  
8 (LP: Long Playback)  
12 or 16 (EP:Extended)  
1 (XP: Excellent Quality)  
2 (SP: Standard Quality)  
4 (LP: Long Playback)  
6 or 8 (EP:Extended)  
1 (XP: Excellent Quality)  
2 (SP: Standard Quality)  
4 (LP: Long Playback)  
6 or 8 (EP:Extended)  
DVD-RW  
DVD-R  
AUDIO + VIDEO  
AUDIO + VIDEO  
5” (4.7GB)  
Before Playing.....................................................................42  
Playing a Disc......................................................................43  
Using the Disc Menu & Title Menu ....................................44  
Using the Search & Skip Functions...................................45  
Slow Motion Play/Step Motion Play...................................46  
About ANYKEY ...................................................................46  
Playing the Title List ............................................................48  
Navigation Menu .................................................................49  
Using the Markers...............................................................52  
Using the Bookmarks..........................................................54  
Selecting the Subtitle Language ........................................56  
Selecting the Soundtracks & Audio Channels ..................57  
Changing the Camera Angle..............................................58  
Repeat Play.........................................................................58  
Zooming-In...........................................................................60  
Select Tray...........................................................................61  
Playing an Audio CD/MP3..................................................61  
Playing a Picture .................................................................68  
5” (4.7GB)  
-
CD-RW/-R  
DVD-RAM/  
-RW/-R  
JPEG  
MP3  
-
Discs that cannot be played  
DVD-Video with a region number other than “1” or “ALL”  
• 12cm 2.6 GB and 5.2 GB DVD-RAM  
• 3.9 GB DVD-R Disc for Authoring.  
• DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard  
• Unfinalized DVD-R,unfinalized DVD-RW(V mode) recorded on other equipment.  
• PAL Disc  
• DVD-ROM/DVD+RW/DVD+R/PD//MV-Disc/DiVX Video Disc, etc.  
• CVD/SVCD/CD-ROM/CDV/CD-G/CD-I/SACD CD Layer  
42 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
ꢀꢀ  
This TWIN TRAY DVD RECORDER can only  
operate with discs that are compatible with  
DVD-RAM Standard Version 2.0.  
Playback and/or recording may not work for  
some types of discs, or when specific  
operations, such as angle change and  
aspect ratio adjustment, are being  
NOTE  
Playing a Disc  
performed. Please refer to information about  
the discs written in detail on the box.  
ꢀꢀ  
Do not allow the disc to become dirty or  
scratched, finger prints, dirt, dust, scratches  
or deposits of cigarette smoke on the  
recording surface may make it impossible to  
use the disc for recording.  
ꢀꢀ  
ꢀꢀ  
To protect a DVD-RAM disc from damage,  
use a cartridge.  
DVD-RAM/-RW/-R discs may not be able to  
play on some DVD players, depending on  
the player, disc and the condition of the  
recording.  
ꢀꢀ  
ꢀꢀ  
Discs with PAL programs recorded on them  
cannot be recorded using this product.  
P tray can play finalized DVD-R or DVD-  
RW(V) disc. If you want to play unfinalized  
DVD-R or DVR-RW(V) disc, you must only  
insert disc on R tray.  
Press the OPEN/CLOSE button.  
1
Place a disc gently into the tray with the disc’s  
label facing up.  
2
English - 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press OPEN/CLOSE button to close the disc tray.  
Using the Disc Menu &  
Title Menu  
3
Your TWIN TRAY DVD RECORDER closes the  
disc tray and plays the disc automatically.  
The TWIN TRAY DVD RECORDER does not  
play discs automatically after the initial power on.  
When the TWIN TRAY DVD RECORDER is  
powered on and a disc is in the tray, the unit will  
be activated and wait in stop status.  
Some type of discs contain a dedicated menu system that  
allows you to select special functions for title, chapter, audio  
track, subtitle, film preview, information on characters, etc.  
Press the PLAY(  
)
button to start playback.  
If you insert an MP3 Disc, your TWIN TRAY  
DVD RECORDER will display the file list on the  
screen and start playing.  
For DVD-VIDEO discs  
If you insert a JPEG Disc, folders and files are  
displayed in the thumbnail picture.  
If you want the unit to play automatically when it  
is powered on with a disc in the unit, power on  
Press the DISC MENU button to enter the disc's  
menu.  
1
2
with the PLAY(  
)
button.  
Move to the setup menu related to the playback  
operation.  
You can select the audio language and the subtitles  
provided by the disc.  
Press the STOP( ) button to stop playback.  
4
Press the TITLE MENU button to move to the disc's  
title menu.  
• Use this button if the disc contains more than one  
title.  
ꢀꢀ  
When you stop playing back a disc, the  
TWIN TRAY DVD RECORDER remembers  
where you stopped, so when you press  
NOTE  
Some type of discs may not support the title menu  
function.  
PLAY( ) button again, it will pick up where  
you left off. (Unless the disc is removed or  
the TWIN TRAY DVD RECORDER is  
unplugged, or if you press the STOP(  
)
button twice.).  
For DVD-RAM/-RW/-R Disc  
ꢀꢀ  
Do not move your TWIN TRAY DVD  
RECORDER while playing, as this may  
cause damage to the disc.  
Caution  
ꢀꢀ  
ꢀꢀ  
Make sure to press the OPEN/CLOSE  
button to open or close the disc tray.  
Do not push the disc tray while it is being  
opened or closed, as this may cause a  
product malfunction.  
Do not place foreign materials on or in the  
disc tray.  
Some functions may perform differently or  
be disabled depending on the disc type.  
If this occurs, refer to the instructions  
written on the disc case.  
Be especially careful that children's fingers  
are not caught between the disc tray and  
the tray chassis when it closes.  
You must only insert one DVD disc at a  
time. Inserting two or more discs will not  
allow playback and may cause damage to  
Press the TITLE LIST button to display title list.  
1
ꢀꢀ  
Title List : Title List is a list of previously  
ꢀꢀ  
ꢀꢀ  
recorded programs. If a title is  
deleted, that title cannot be played  
again.  
NOTE  
ꢀꢀ  
Play List : This refers to a list of user-selected  
titles. When one playlist is played,  
only the scene selected by the  
user will play and then stop. Since  
only the information necessary for  
playing a desired scene is included  
in a playlist, even if that playlist is  
deleted, the original recording will  
not be deleted. (only VR mode)  
ꢀꢀ  
ꢀꢀ  
the TWIN TRAY DVD RECORDER  
.
44 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Skipping Chapters, a Tracks or  
Markers  
Using the Search & Skip  
Functions  
During play, you can search quickly through a chapter  
or track.  
Searching through a Chapter or  
Track  
During play, press the SKIP (  
) buttons on the  
1
remote control.  
If you press the SKIP (  
it moves to the beginning of the chapter or track or  
marker(DVD-RAM/-RW(VR mode)).  
Pressing the button once again within 3 seconds  
returns to the beginning of the previous chapter or  
track or marker(DVD-RAM/-RW(VR mode)).  
) button,  
During play, press the SEARCH (  
the remote control.  
) buttons on  
1
Fast X 2  
Fast X 4 ꢀ  
DVD-VIDEO/  
DVD-RAM/-RW/-R  
Fast X 8 ꢀ  
Fast X 16 ꢀ  
If you press the SKIP (  
it moves to the next chapter, track or marker  
(DVD-RAM/-RW(VR mode)).  
) button,  
Fast X 32 ꢀ  
Fast X 128  
X 2 ꢀ  
X 4 ꢀ  
X 8  
AUDIO CD  
(CD-DA)  
This function will not operate if a selected  
You can scan the program in reverse.  
To return to normal speed playback, press the  
PLAY ( ) button.  
title does not have Chapters, Tracks or  
Markers.  
NOTE  
When you press and hold the SEARCH (  
)
buttons, playback is done at the default speed of  
X4. If you release the SEARCH ( ) buttons,  
playback is performed at a normal speed.  
The speed marked in this function may be  
different from the actual playback speed.  
ꢀꢀ  
No sound is heard during Scan(Search)  
mode, except when using CDs (CD-DA).  
NOTE  
English - 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slow Motion Play/  
Step Motion Play  
About ANYKEY  
Slow Motion Play  
The ANYKEY function allows you to easily search for  
a desired scene by accessing title, chapter, track,  
time. You can also change the subtitle and audio  
settings and set some features including Marker,  
Angle, Zoom, Repeat, Select Tray, Disc Manager,  
Navigation, Rec. mode.  
In pause or step mode, press the SEARCH (  
) buttons on  
the remote control.  
Moving to a scene directly using the  
ANYKEY  
If you press the SEARCH (  
Slow 1/8 Slow 1/4 ꢀ  
If you press the SEARCH ( button,  
Slow 1/8 Slow 1/4 Slow 1/2  
To return to normal speed playback, press the  
PLAY ( ) button.  
)
button,  
Slow 1/2  
• If you want to move to a title, a chapter or a  
track to find a desired scene.  
)
Press and hold the SEARCH (  
pause, the disc will play slowly at a 1/4 speed. If the  
button is released, the pause operation will resume.  
)
buttons during  
- Using Title, Chapter or Track -  
Press the ANYKEY button during playback.  
1
Step Motion Play  
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Repeat  
Zoom  
Select Tray  
Press the STEP(  
)
buttons on the remote control  
in the pause mode.  
Each time the button is pressed, a new frame will  
appear.  
Press the …† buttons to select Search, then  
When the STEP(  
)
button is pressed, the previous  
button is pressed, the next  
2
press the ENTER or  
button.  
frame will be activated.  
When the STEP(  
frame will be activated.  
To return to normal speed playback, press the PLAY  
) button.  
)
DVD-Video  
Title  
1/10  
Chapter  
1/40  
Time  
00:01:45  
MOVE  
CHANGE  
(
46 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
This may not work for some discs. When  
an audio CD(CD-DA) or an MP3 disc is  
inserted, according to a disc type, the  
information display may not be appear.  
Press the …† buttons to select Title, Chapter  
or Track.  
NOTE  
3
4
Press the œ buttons or number buttons to  
select the desired scene, then press the  
ENTER button.  
ꢀꢀ  
ꢀꢀ  
The Time Search function does not  
operate in some discs.  
To make the screen disappear, press the  
ANYKEY button again  
If you want to move to a desired time following will  
help you find a scene.  
- Using Time -  
Press the ANYKEY button during playback.  
1
2
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Repeat  
Zoom  
Select Tray  
Press the …† buttons to select Search, then  
press the ENTER or  
button.  
DVD-Video  
Title  
1/10  
Chapter  
1/40  
Time  
00:01:45  
MOVE  
CHANGE  
Press the …† buttons to select Time.  
3
4
Enter the time in the sequence of hours, minutes,  
and seconds using the number buttons, then  
press the ENTER button.  
English - 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select an entry you  
2
want to play from Title List, then press the  
Playing the Title List  
ENTER or PLAY (  
)
button.  
The selected entry (title) will be played back.  
- About INFO button -  
If you press the INFO button once during playback, Disc  
information screen appears.: Displays Total numbers of  
Titles and Playlists, Recordable Time(Title), Available  
Space(Music/Photo).  
Follow these instructions to play back a scene from the  
Title List.  
DVD-RAM(VR)  
Disc Name  
Disc Info  
01/01 CH7  
Using the TITLE LIST button  
Total Title  
13  
Total Playlist  
Recordable Time  
Protection  
None  
01:48 SP  
Not Protected  
JAN/01/2005 (SAT)  
AM 12:00  
With the unit in Stop mode/Playback mode, press the  
1
TITLE LIST button.  
The Title List screen is displayed.  
Pressing the INFO button twice, Current playback  
information screen appears.: Displays information of  
Playback Name, Title, Created Time, Length, Playing  
Time, Audio, and if the disc protection is activated.  
Title List  
Length  
DVD-RAM(VR)  
No.  
Title  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
JAN/18/2005 12:15 AM CH7  
JAN/18/2005 12:15 AM  
DVD-RAM(VR)  
Name  
Playing Info  
01/01 CH7  
1/13  
LP  
1/1 page  
MOVE  
SELECT  
RETURN  
EXIT  
Title  
Created Time  
JAN/01/2005 12:39 AM  
00:02:27 LP  
00:02:07  
Length  
Playing Time  
Using the MENU button.  
Audio  
Title Protection  
JAN/01/2005 (SAT)  
Dolby Digital 2CH  
Not Protected  
• With the unit in Stop mode/Playback mode,  
press the MENU button.  
AM 12:00  
To stop title play, press the STOP  
To return the title list screen, press the TITLE  
LIST button.  
(
)button.  
Title  
DVD-RAM(VR)  
3
Press ENTER or Right button  
Title  
for Title List.  
Music  
Photo  
Timer Record  
Setup  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select Title, then  
press the ENTER or button  
.
48 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select an entry you  
want to play from Title List, then press the  
ANYKEY button.  
2
3
Navigation Menu  
Title List  
DVD-RW(VR)  
No.  
Title  
Length  
Rename  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Protection  
Delete  
Scene Navigation  
If there is a title composed of markers (see page 52),  
you can search the desired scene using the Scene  
Navigation.  
Partlal Delete  
Playlist  
Navigation  
Select Tray  
Disc Manager  
1/1 page  
MOVE  
SELECT  
RETURN  
EXIT  
(VR mode)  
Press the …† buttons to select Navigation,  
then press the ENTER or  
button.  
Using the TITLE LIST button  
Title List  
DVD-RW(VR)  
Rename  
001 JAN/18/2005 12:15A 00:10:21  
002 JAN/19/2005 12:15A 00:40:03  
003 JAN/20/2005 12:15A 00:20:15  
004 JAN/25/2005 12:15A 00:50:16  
With the unit in Stop mode/Playback mode, press the  
Protection  
Delete  
1
TITLE LIST button.  
The Title List screen is displayed.  
Partlal Delete  
Playlist  
Scene Navigation  
Navigation  
Select Tray  
Disc Manager  
Time Navigation  
1/1 page  
Title List  
MOVE  
SELECT  
RETURN  
EXIT  
DVD-RW(VR)  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
JAN/18/2005 12:15 AM CH7  
JAN/18/2005 12:15 AM  
Press the …† buttons to select Scene  
Navigation, then press the ENTER or  
4
5
button.  
SP  
1/1 page  
MOVE  
SELECT  
RETURN  
EXIT  
Scene Navigation  
DVD-RW(VR)  
Title List No. 1  
Using the MENU button.  
• With the unit in Stop mode/Playback mode,  
press the MENU button.  
01 00:00:16 01 00:05:16  
1/1 Page  
SELECT  
Title  
MOVE  
RETURN  
EXIT  
DVD-RW(VR)  
Press ENTER or Right button  
Title  
for Title List.  
Music  
Photo  
Press the …† œ √ buttons to select desired  
scene, then press the ENTER or PLAY (  
button.  
Timer Record  
Setup  
)
MOVE  
SELECT  
RETURN  
EXIT  
• Press the …† buttons to select Title,  
then press the ENTER or button  
.
English - 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time Navigation  
Using the ANYKEY button  
Using this function, you can search scene  
minute-by-minute from the recorded title list.  
Press the ANYKEY button during playback.  
1
2
3
(VR mode)  
Search  
Navigation  
Marker  
Subtitle  
Audio  
Using the TITLE LIST button  
Repeat  
Zoom  
Select Tray  
Disc Manager  
With the unit in Stop mode/Playback mode, press the  
TITLE LIST button.  
The Title List screen is displayed.  
1
Press the …† buttons to select Navigation,  
then press the ENTER or  
Title List  
button.  
DVD-RW(VR)  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Search  
JAN/18/2005 12:15 AM CH7  
JAN/18/2005 12:15 AM  
Navigation  
Marker  
Scene Navigation  
Time Navigation  
SP  
Subtitle  
1/1 page  
Audio  
MOVE  
SELECT  
RETURN  
EXIT  
Repeat  
Zoom  
Select Tray  
Disc Manager  
Using the MENU button.  
• With the unit in Stop mode/Playback mode,  
press the MENU button.  
Press the …† buttons to select Scene  
Navigation, then press the ENTER or  
button.  
Title  
DVD-RW(VR)  
Press ENTER or Right button  
Title  
Scene Navigation  
for Title List.  
Music  
DVD-RW(VR)  
Title List No. 1  
Photo  
Timer Record  
Setup  
01 00:00:16 01 00:05:16  
MOVE  
SELECT  
RETURN  
EXIT  
1/1 Page  
SELECT  
MOVE  
RETURN  
EXIT  
• Press the …† buttons to select Title,  
then press the ENTER or button  
.
Press the …† œ √ buttons to select desired  
4
scene, then press the ENTER or PLAY (  
button.  
)
ꢀꢀ  
Scene Navigation will not operate if a  
selected title does not have Markers.  
NOTE  
50 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select an entry you  
want to play from Title List, then press the  
ANYKEY button.  
Using the ANYKEY button  
2
Press the ANYKEY button during playback.  
Title List  
1
2
No.  
Title  
Length  
Rename  
Protection  
Copy  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Search  
Delete  
Edit  
Navigation  
Marker  
Playlist  
Subtitle  
Navigation  
Audio  
Select Tray  
Repeat  
1/1 page  
Disc Manager  
Zoom  
MOVE  
SELECT  
RETURN  
EXIT  
Select Tray  
Disc Manager  
Press the …† buttons to select Navigation,  
Press the …† buttons to select Navigation,  
button.  
then press the ENTER or  
button.  
3
4
5
then press the ENTER or  
Title List  
Length  
Search  
No.  
Title  
Rename  
Navigation  
Marker  
Scene Navigation  
Time Navigation  
Protection  
Copy  
01  
02  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
Subtitle  
03  
04  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Delete  
Edit  
Audio  
Repeat  
Playlist  
Zoom  
Navigation  
Scene Navigation  
Select Tray  
Disc Manager  
Select Tray  
Time Navigation  
1/1 page  
Disc Manager  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select Time  
Navigation, then press the ENTER or  
3
button.  
Press the …† buttons to select Time  
Navigation, then press the ENTER or  
button.  
Time Navigation  
DVD-RW(VR)  
Time Navigation  
DVD-RW(VR)  
12:15 AM  
12:15 AM  
12:25 AM  
RETURN  
œ √  
CHANGE  
SELECT  
EXIT  
12:15 AM  
12:15 AM  
12:25 AM  
RETURN  
œ √  
CHANGE  
SELECT  
EXIT  
Press the œ √ buttons to skip one minute at a  
time and search the desired scene, then press  
4
the ENTER or PLAY (  
)
button.  
Press the œ buttons to skip one minute at a  
time and search the desired scene, then press  
the ENTER or PLAY (  
)
button.  
ꢀꢀ  
Cursor does not move if selected recorded  
title is shorter than 1 minute.  
NOTE  
ꢀꢀ  
ꢀꢀ  
The Navigation function may not work with  
discs recorded on another manufacturer's  
unit.  
An edited title may not display exact  
search time.  
English - 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the ENTER button when the desired scene  
appears.  
Using the Markers  
2
The number 01 is displayed and the scene is memorized.  
01 -- -- -- -- -- -- -- -- --  
N:1  
Marker  
(VR mode)  
You can set marks on a disc so that you can start  
playback from the marked position.  
MOVE  
PLAY  
CANCEL  
RETURN  
This function is available on the R tray in the VR mode.  
Press the œ √ buttons to move to the next position.  
Using the MARKER button  
3
4
Press the MARKER button during playback.  
1
Press the ENTER button again when the desired  
scene appears.  
-- -- -- -- -- -- -- -- -- --  
N:0  
Marker  
The number 02 is displayed and the scene is  
memorized.  
01 02 -- -- -- -- -- -- -- --  
N:2  
Marker  
SELECT  
RETURN  
Using the ANYKEY button.  
MOVE  
PLAY  
CANCEL  
RETURN  
• Press the ANYKEY button during playback.  
• DVD-RAM or DVD-RW (VR Mode) discs have the  
Marker function instead of the Bookmark function.  
The Marker function allows you to mark up to 99  
scenes. Since the scenes may be displayed as many  
different pages, numbering is necessary. If a disc in  
use is encoded with Cartridge Protection or Disc  
Protection, Markers cannot be set or deleted. Only  
playback is available.  
Search  
Navigation  
Marker  
Subtitle  
Audio  
Repeat  
Zoom  
Select Tray  
Disc Manager  
ꢀꢀ  
When the disc tray is opened and then  
closed, marks will disappear.  
• Press the …† buttons to select Marker,  
then press the ENTER or button  
NOTE  
.
52 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing back a marker  
Clearing a marker  
Using the MARKER button  
Using the MARKER button  
Press the MARKER button during playback.  
Press the MARKER button during playback.  
1
1
01 02 -- -- -- -- -- -- -- --  
N:2  
Marker  
Marker  
01 02 03 04 05 06 07 08 09 10  
N:10  
MOVE  
PLAY  
CANCEL  
RETURN  
MOVE  
PLAY  
CANCEL  
RETURN  
Using the ANYKEY button.  
Using the ANYKEY button.  
• Press the ANYKEY button during playback.  
• Press the ANYKEY button during playback.  
Search  
Search  
Navigation  
Marker  
Navigation  
Marker  
Subtitle  
Subtitle  
Audio  
Audio  
Repeat  
Repeat  
Zoom  
Zoom  
Select Tray  
Disc Manager  
Select Tray  
Disc Manager  
• Press the …† buttons to select Marker,  
then press the ENTER or button  
• Press the …† buttons to select Marker,  
then press the ENTER or button  
.
.
Press the œ √ buttons to select a marked scene.  
Press the CANCEL button to delete the selected  
mark.  
Press the œ √ buttons to select a marked scene.  
2
2
3
01 02 -- -- -- -- -- -- -- --  
N:2  
Marker  
01 02 03 04 05 06 07 08 09 10  
N:10  
Marker  
MOVE  
PLAY  
CANCEL  
RETURN  
MOVE  
PLAY  
CANCEL  
RETURN  
01 02 03 04 05 06 07 08 09 --  
N:9  
Marker  
Press the ENTER or PLAY (  
)
button to start  
playing from the selected scene.  
• If you press the SKIP (  
) button, it moves to  
the beginning of the marker. Pressing the button  
once again within 3 seconds returns to the  
beginning of the previous marker.  
MOVE  
PLAY  
CANCEL  
RETURN  
• If you press the SKIP (  
) button, it moves to  
the next marker.  
English - 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
When a marker is cleared while DVD-RAM/-  
RW (VR mode) is playing, marker numbers  
will change. For example, if the 7th marker is  
cleared after ten markers are registered, the  
marker numbers after the eighth will  
automatically move ahead by one and the 8th  
marker becomes the 7th.  
Press the ENTER button when the desired scene  
appears.  
2
The number 1 is displayed and the scene is  
memorized.  
1
- - - - - - - - --  
Bookmark  
Using the Bookmarks  
MOVE  
PLAY  
CANCEL  
RETURN  
Press the œ √ buttons to move to the next  
3
4
position.  
(V-mode)  
Press the ENTER button again when the desired  
scene appears.  
The number 2 is displayed and the scene is  
memorized.  
Using the MARKER button  
Press the MARKER button during playback.  
1
2
- - - - - - - --  
Bookmark  
1
- - - - - - - - - --  
Bookmark  
MOVE  
PLAY  
CANCEL  
RETURN  
MOVE  
SELECT  
RETURN  
• Repeat above to bookmark other positions.  
You can bookmark up to 10 scenes.  
Using the ANYKEY button.  
• Press the ANYKEY button during playback.  
ꢀꢀ  
When the disc tray is opened and then  
closed, bookmarks will disappear.  
Search  
Bookmark  
NOTE  
Audio  
Subtitle  
Angle  
Repeat  
Zoom  
Select Tray  
• Press the …† buttons to select Bookmark, then  
press the ENTER or button  
.
54 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing back a bookmark  
Clearing a bookmark  
Using the MARKER button  
Using the MARKER button  
Press the MARKER button during playback.  
Press the MARKER button during playback.  
1
1
1
2
- - - - - - - --  
1
2
- - - - - - - --  
Bookmark  
Bookmark  
MOVE  
PLAY  
CANCEL  
RETURN  
MOVE  
PLAY  
CANCEL  
RETURN  
Using the ANYKEY button.  
Using the ANYKEY button.  
• Press the ANYKEY button during playback.  
• Press the ANYKEY button during playback.  
Search  
Search  
Bookmark  
Bookmark  
Audio  
Audio  
Subtitle  
Angle  
Subtitle  
Angle  
Repeat  
Zoom  
Repeat  
Zoom  
Select Tray  
Select Tray  
• Press the …† buttons to select Bookmark, then  
press the ENTER or button  
• Press the …† buttons to select Bookmark, then  
press the ENTER or button  
.
.
Press the œ √ buttons to select a bookmarked  
scene.  
Press the œ √ buttons to select a bookmarked  
scene.  
2
3
2
3
Press the ENTER or PLAY(  
) button to start  
1
2
- - - - - - - --  
Bookmark  
playing from the selected scene.  
MOVE  
PLAY  
CANCEL  
RETURN  
Press the CANCEL button to delete the selected  
bookmark.  
English - 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the Subtitle  
Language  
Using the ANYKEY button  
Press the ANYKEY button during playback.  
1
2
Selects one of the subtitle languages recorded on the  
disc.  
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Repeat  
Zoom  
Select Tray  
(VR mode)  
Using the SUBTITLE button  
Press the …† buttons to select Subtitle, then  
Press the SUBTITLE button during playback.  
press the ENTER or  
button.  
1
Search  
Subtitle  
Off  
Bookmark  
Audio  
Subtitle  
Angle  
Off  
KOR  
ENG  
Repeat  
Zoom  
Select Tray  
Press the …† buttons to select the desired subtitle  
3
language, then press the ENTER or  
button.  
Press the buttons to select the desired  
subtitle language. Also, press the SUBTITLE  
button repeatedly to select the desired subtitle  
language.  
2
To make the screen disappear, press the CANCEL  
or RETURN button.  
ꢀꢀ  
The subtitle display may be different  
depending on the disc type.  
NOTE  
ꢀꢀ  
ꢀꢀ  
Some discs allow you to select the  
language for the disc menu only.  
If the subtitles overlap, disable the caption  
function on your TV.  
56 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the Soundtracks  
& Audio Channels  
Using the ANYKEY button  
Press the ANYKEY button during playback.  
1
2
Selecting the Audio  
Search  
Selects one of the soundtracks recorded on the disc.  
Also selects the audio channels.  
Bookmark  
Audio  
Subtitle  
Angle  
Repeat  
Zoom  
Select Tray  
(VR mode)  
Using the AUDIO button  
Press the …† buttons to select Audio, then  
Press the AUDIO button during playback.  
press the ENTER or  
button.  
1
DVD-VIDEO  
Search  
Audio  
ENG Dolby Digital 5.1CH  
Bookmark  
Audio  
ENG Dolby Digital 5.1CH  
KOR Dolby Digital 5.1CH  
Subtitle  
Angle  
Repeat  
Zoom  
Select Tray  
DVD-RAM/-RW  
Press the …† buttons to select the desired  
3
soundtracks or audio channel, then press the  
ENTER or button.  
Audio  
Dolby Digital 2/0 L + R  
ꢀꢀ  
Soundtracks or Audio channel may be  
different because they are disc-specific.  
NOTE  
ꢀꢀ  
Some discs allow you to select the audio  
language for the disc menu only.  
To select the desired soundtrack or audio channel,  
press the buttons or press the AUDIO button  
repeatedly.  
2
To make the screen disappear, then press the  
CANCEL or RETURN button.  
English - 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Camera  
Angle  
Repeat Play  
When a DVD-VIDEO contains multiple angles of a  
particular scene, you can select the Angle function.  
Playing Repeatedly(Repeat Playback)  
Using the REPEAT button  
Using the ANYKEY button  
Press the REPEAT button during playback.  
1
2
Press the ANYKEY button during playback.  
1
Repeat  
Off  
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Repeat  
Zoom  
Select Tray  
Press the …† buttons to select the Off, Title or  
Chapter you want to play repeatedly, then  
press the ENTER button.  
Press the …† buttons to select Angle, then  
2
press the ENTER or  
button.  
Search  
Repeat  
Title  
Bookmark  
Audio  
Subtitle  
Angle  
Angle1  
Angle 2  
Angle 3  
Angle 4  
Angle 5  
Angle 6  
Repeat  
Zoom  
Select Tray  
Press the …† buttons to select the desired angle,  
3
then press the ENTER or button.  
ꢀꢀ  
This function is disc-dependent, and may  
not work on all DVDs.  
NOTE  
ꢀꢀ  
This function does not work when a DVD  
has not been recorded with a multi-  
camera angle system.  
58 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat A-B  
Using the ANYKEY button  
Press the ANYKEY button during playback.  
1
2
Using the REPEAT A-B button  
Search  
Press the REPEAT A-B button during playback.  
Bookmark  
1
2
Audio  
Subtitle  
Angle  
Repeat A-B  
Off  
Repeat  
Zoom  
Select Tray  
Press the …† buttons to select Repeat, then  
press the ENTER or  
button.  
Press the ENTER button at the point where you  
want the repeat play to start (A) and press it again at  
the point where you want the repeat play to stop (B).  
Repeat playback of the A-B section starts.  
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Repeat Off  
Repeat  
Repeat A - B  
Repeat Title  
Repeat Chapter  
Zoom  
Select Tray  
Repeat A-B  
A-B  
Press the …† buttons to select Repeat Off,  
Repeat A-B, Repeat Title or Repeat Chapter you  
want to play repeatedly, then press the ENTER or  
button.  
3
ꢀꢀ  
DVD-RAM/-RW(VR mode), unfinalized  
DVD-R and unfinalized DVD-RW (V mode)  
do not repeat a chapter.  
NOTE  
English - 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zooming-In  
Using the ANYKEY button  
Press the ANYKEY button during playback.  
1
2
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Press the ANYKEY button during playback.  
Repeat  
Zoom  
1
Select Tray  
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Press the …† buttons to select Repeat, then  
press the ENTER or  
button.  
Repeat  
Zoom  
Select Tray  
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Press the …† buttons to select Zoom, then press  
the ENTER or button. will be displayed.  
Repeat Off  
Repeat  
Repeat A - B  
Repeat Title  
Repeat Chapter  
Zoom  
2
(
)
Select Tray  
Press the …† buttons to select Repeat A-B,  
then press the ENTER or button.  
3
4
Press the ENTER button at the point where you  
want the repeat play to start (A) and press it  
again at the point where you want the repeat  
play to stop (B).Repeat playback of the A-B  
section starts.  
Press …† œ √ buttons to move to the area you  
3
4
want to enlarge.  
Press the ENTER button.  
The screen will be enlarged to twice the normal  
size. The screen size will be enlarged to four times  
the normal size.  
■■  
If you set point (B) before five seconds of  
playback time has elapsed, the prohibition  
mark ( ) will appear.  
NOTE  
■■  
You can also return to Normal Playback by  
pressing the CANCEL button.  
DVD-VIDEO/  
DVD-RAM/-RW/-R  
normal size X2 X4 X2  
normal size  
■■  
Audio CDs(CD-DA) and MP3 discs do not  
support the Repeat A-B function.  
■■  
When recording is done in the EP mode, the  
Zoom function will not be supported except  
when the recording has been done in V  
mode.  
NOTE  
60 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select Tray  
Playing an Audio  
CD/MP3  
Playing an Audio CD(CD-DA)  
Press the ANYKEY button during playback.  
1
Insert an audio CD (CD-DA) into the disc tray.  
• The audio CD menu appears and the tracks  
(songs) are played automatically.  
Search  
Bookmark  
Audio  
1
Subtitle  
Angle  
Repeat  
Zoom  
Select Tray  
Music List  
CD  
TRACK  
1
02 : 10  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CDDA  
CDDA  
CDDA  
CDDA  
Press the …† buttons to select Select Tray, then  
CD-DA  
CDDA  
CDDA  
01/15  
04:57  
2
3
press the ENTER or  
button.  
1/3 Page  
MOVE  
SELECT  
RETURN  
EXIT  
Search  
Bookmark  
Audio  
Subtitle  
Angle  
Press the …† buttons to select the track (song) you  
want to hear, and then press the ENTER button.  
Repeat  
Zoom  
2
Recorder Tray  
Player Tray  
Select Tray  
Audio CD(CD-DA) Screen Elements  
Press the …† buttons to select Recorder Tray or  
Player Tray, then press the ENTER or button.  
!
Music List  
CD  
TRACK  
1
02 : 10  
$
%
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
CD-DA  
01/15  
04:57  
@
#
CDDA TRACK 7  
1/3 Page  
MOVE  
SELECT  
RETURN  
EXIT  
1. Current track (song): Displays the number of the  
track currently being played.  
2. Displays the current play index, total track number.  
3. Display available buttons.  
4. This shows the operating state of a disc and a  
playback time corresponding to a portion that is  
currently played.  
5. Displays the track list (song list).  
English - 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buttons on the Remote Control  
Playing an MP3 Disc  
used for Audio CD(CD-DA) playback  
Insert an MP3 disc into the disc tray.  
1
2
• The MP3 menu is displayed and the tracks  
(songs) are played automatically  
.
Music List  
CD  
Bryan Adams.mp3 02 : 10  
..  
Bryan Adams.mp3  
SELECT  
TRAY  
MP3 Bryan Adams_2.mp3  
MP3 Straight from the heart.mp3  
MP3 Run to you.mp3  
MP3 Heaven.mp3  
INPUT  
R
P
TV  
MP3  
01/15  
MP3 This Love.mp3  
4.0 MB  
1/3 Page  
MOVE  
SELECT  
RETURN  
EXIT  
5
4
Press the …† buttons to select the track you want to  
hear, and then press the ENTER button.  
6
7
6
8
9
1
2
2
3
MP3 Screen Elements  
1
!
Music List  
CD  
Bryan Adams.mp3 02 : 10  
$
%
..  
DIRECT COPY  
MARKER  
Bryan Adams.mp3  
MP3 Bryan Adams_2.mp3  
MP3 Straight from the heart.mp3  
MP3 Run to you.mp3  
MP3 Heaven.mp3  
MP3  
01/15  
@
#
MP3 This Love.mp3  
4.0 MB  
1/3 Page  
1. …†: Selects a track (song).  
2. œ √ : Scrolls the page up/down.  
3. ENTER button: Plays the selected track (song).  
MOVE  
SELECT  
RETURN  
EXIT  
4. SKIP  
5. SKIP  
(
(
) button: Plays the next track.  
) button: Returns to the beginning of the  
1. Current track (song): Displays the name of the  
track being played.  
2. Displays the current folder, play index and current  
track size.  
current track when pressed during playback. If  
pressed again, your TWIN TRAY DVD RECORDER  
moves to and plays the previous track.  
If you press the this button within three seconds after  
playback starts, the previous track will be played.  
If you press the this button after three seconds, the  
current track will be replayed from the beginning.  
3. Displays available buttons.  
4. This shows the operating state of a disc and a  
playback time corresponding to a portion that is  
currently played.  
5. Displays the information for the folder and its tracks.  
6. Press the SEARCH (  
) buttons:  
Fast Play (X2, X4, X8)  
7. STOP  
8. PLAY  
(
(
) button: Stops a track(song).  
) button: Plays a track(song) or pauses  
■■  
If a disc contains only MP3 files or only  
JPEG files, the MP3 or JPEG screen  
playback.  
NOTE  
appears after the disc is loaded.  
9. ANYKEY button: The ANYKEY menu is displayed.  
(Play Mode, Go To Playlist, New Playlist or Select  
Tray).  
■■  
If a disc contains a mix of MP3 and JPEG  
files, you need to select Music for MP3  
files or Photo for JPEG files.  
62 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buttons on the Remote Control  
used for MP3 playback  
Repeat CD (CD-DA) & MP3  
Using the REPEAT button.  
Press the REPEAT button during playback.  
1
2
Music List  
CD  
TRACK  
1
02 : 10  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
SELECT  
TRAY  
CDDA  
CDDA  
CDDA  
CDDA  
INPUT  
R
P
TV  
CD-DA  
CDDA  
CDDA  
01/15  
04:57  
1/3 Page  
MOVE  
SELECT  
RETURN  
EXIT  
5
6
4
Press the REPEAT button repeatedly to select the repeat  
7
8
mode you want.  
1
2
Music List  
CD  
TRACK  
1
02 : 10  
2
3
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CDDA  
CDDA  
CDDA  
CDDA  
1
CD-DA  
CDDA  
CDDA  
01/15  
04:57  
1/3 Page  
MOVE  
SELECT  
RETURN  
EXIT  
DIRECT COPY  
MARKER  
Repeat Track (CD (CD-DA)/MP3)  
Repeat Folder (MP3)  
Repeat All (CD (CD-DA)/MP3)  
Random (CD (CD-DA)/MP3): The random option  
plays a disc’s track in random order.  
1. …†: Selects a track (song).  
2. œ √ : Move the page up/down.  
3. ENTER button: Plays the selected track (song).  
Normal (CD (CD-DA)/MP3): Track on a disc are  
played in the order in which they were recorded on the  
disc.  
4. SKIP  
(
) button: Plays the next track.  
5. SKIP  
(
) button: Returns to the beginning of the  
current track when pressed during playback. If  
pressed again, your TWIN TRAY DVD RECORDER  
moves to and plays the previous track.  
If you press the this button within three seconds after  
playback starts, the previous track will be played.  
If you press the this button after three seconds, the  
current track will be replayed from the beginning.  
- To return to normal playback -  
Press the REPEAT or CANCEL button repeatedly  
to return to normal playback.  
3
6. STOP  
(
) button: Stops a track(song).  
7. PLAY  
(
) button: Plays a track(song) or pauses  
playback.  
8. ANYKEY button: The ANYKEY menu is displayed.  
(Play Mode, Go To Playlist, New Playlist or Select  
Tray).  
English - 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
New Playlist  
Using the ANYKEY button.  
You can register a maximum 28 tracks in the playlist.  
Press the ANYKEY button during the Music List  
playback.  
Press the ANYKEY button during the Music List  
playback.  
1
2
1
Music List  
CD  
TRACK  
1
»
02 : 10  
Music List  
02 : 10  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CD  
TRACK  
1
»
CDDA  
CDDA  
CDDA  
CDDA  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CDDA  
CDDA  
CDDA  
CDDA  
Play Mode  
CDDA  
CDDA  
Go To Playlist  
Play Mode  
New Playlist  
Selet Tray  
CDDA  
CDDA  
Go To Playlist  
1/3 Page  
RETURN  
New Playlist  
Selet Tray  
1/3 Page  
RETURN  
MOVE  
SELECT  
EXIT  
MOVE  
SELECT  
EXIT  
Press the …† buttons to select Play Mode,  
then press the ENTER or button.  
Press the …† buttons to select New Playlist,  
2
then press the ENTER or  
button.  
Music List  
CD  
TRACK  
1
» 02 : 10  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
Make Playlist  
CDDA  
CDDA  
CDDA  
CD  
CDDA  
TRACK 1  
Normal  
Play Mode  
CDDA  
TRACK 2  
Repeat Track  
Go To Playlist  
CDDA  
TRACK 3  
Repeat All  
New Playlist  
Selet Tray  
CDDA  
TRACK 4  
Random  
RETURN  
CDDA  
TRACK 5  
CDDA  
TRACK 6  
MOVE  
SELECT  
EXIT  
CDDA  
TRACK 7  
1/3 Page  
MOVE  
Add  
RETURN  
EXIT  
Press the …† buttons to select desired play mode,  
then press the ENTER or button.  
3
Normal (CD (CD-DA)/MP3): Track on a disc are  
played in the order in which they were recorded on the  
disc.  
Press the …† buttons to select tracks in order in  
which you want them to play, then press the  
ENTER button.  
3
Repeat Track (CD (CD-DA)/MP3)  
Repeat Folder (MP3)  
Repeat All (CD (CD-DA)/MP3)  
Make Playlist  
CD  
Random (CD (CD-DA)/MP3): The random option  
plays a disc’s track in random order.  
01.  
02.  
03.  
04.  
TRACK 1  
TRACK 3  
TRACK 7  
TRACK 4  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
1/1 Page  
RETURN  
1/3 Page  
MOVE  
Add  
EXIT  
64 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Go To Playlist  
To remove a track from the Playlist, press the  
…† buttons to select the wrong track, then  
4
press the ENTER or CANCEL button.  
The selected track will be removed.  
Press the ANYKEY button during the Music List  
playback.  
1
2
Make Playlist  
CD  
Music List  
01.  
02.  
03.  
04.  
TRACK 1  
TRACK 3  
TRACK 7  
TRACK 4  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CD  
TRACK  
1
»
02 : 10  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CDDA  
CDDA  
CDDA  
CDDA  
Play Mode  
CDDA  
CDDA  
Go To Playlist  
1/1 Page  
1/3 Page  
MOVE  
New Playlist  
Selet Tray  
Delete  
EXIT  
1/3 Page  
RETURN  
MOVE  
SELECT  
EXIT  
To store the playlist, press the ANYKEY button.  
5
Press the …† buttons to select Go To Playlist,  
then press the ENTER or  
button.  
Make Playlist  
CD  
01.  
02.  
03.  
TRACK 1  
TRACK 3  
TRACK 7  
CDDA TRACK 1  
Playlist  
00 : 00  
CDDA  
TRACK 2  
CDDA  
CDDA  
CDDA  
CDDA  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
CD  
PLAYLIST  
Playlist  
Playlist  
1
2
Delete  
Go To Playlist  
1/1 Page  
RETURN  
PLAYLIST  
- -  
MOVE  
SELECT  
EXIT  
04:57  
1/1 Page  
RETURN  
MOVE  
SELECT  
EXIT  
Press the …† buttons to select the Go To  
Playlist, then press the ENTER button.  
A new Playlist will be created.  
6
Press the …† buttons to select the desired  
playlist folder, then press the ENTER button.  
The selected tracks are played automatically.  
3
Playlist  
CD  
00 : 00  
PLAYLIST  
Playlist  
Playlist  
1
2
PLAYLIST  
■■  
After playback of selected playlist folder  
- -  
has finished, next playlist folder is played  
automatically.  
04:57  
NOTE  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
English - 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delete the Playlist  
Go To Edit Playlist  
Press the ANYKEY button during the Music List  
Press the ANYKEY button during the Music List  
1
2
playback.  
1
2
3
4
playback.  
Music List  
Music List  
CD  
TRACK  
1
»
02 : 10  
CD  
TRACK  
1
»
02 : 10  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CDDA  
CDDA  
CDDA  
CDDA  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CDDA  
CDDA  
CDDA  
CDDA  
Play Mode  
Go To Playlist  
CDDA  
CDDA  
Play Mode  
Go To Playlist  
CDDA  
CDDA  
New Playlist  
Selet Tray  
1/3 Page  
RETURN  
New Playlist  
Selet Tray  
1/3 Page  
RETURN  
MOVE  
SELECT  
EXIT  
MOVE  
SELECT  
EXIT  
Press the …† buttons to select Go To Playlist,  
then press the ENTER or  
button.  
Press the …† buttons to select Go To Playlist,  
then press the ENTER or  
button.  
Playlist  
00 : 00  
CD  
PLAYLIST  
Playlist  
Playlist  
1
2
Playlist  
00 : 00  
CD  
PLAYLIST  
PLAYLIST  
- -  
Playlist  
Playlist  
1
2
04:57  
1/1 Page  
RETURN  
PLAYLIST  
- -  
MOVE  
SELECT  
EXIT  
04:57  
1/1 Page  
RETURN  
MOVE  
SELECT  
EXIT  
Press the …† buttons to select the Playlist you  
want to delete, then press the ANYKEY button.  
Playlist  
CD  
00 : 00  
Press the …† buttons to select the Playlist you  
want to delete, then press the ANYKEY button.  
PLAYLIST  
3
Playlist  
Playlist  
1
2
Delete Playlist  
Playlist  
Go To Edit Playlist  
CD  
TRACK  
2
00 : 00  
Go To Music List  
New Playlist  
PLAYLIST  
1/1 Page  
Playlist  
Playlist  
1
2
MOVE  
SELECT  
RETURN  
EXIT  
Delete Playlist  
Go To Edit Playlist  
Go To Music List  
New Playlist  
1/1 Page  
Press the …† buttons to select the Delete  
Playlist, then press the ENTER or  
MOVE  
SELECT  
RETURN  
EXIT  
button.  
Playlist  
CD  
00 : 00  
PAYIS
Do you want to delete?  
Yes  
No  
MOVE  
SELECT  
RETURN  
EXIT  
Press the œ buttons to select Yes, then press the  
ENTER button.  
The selected Playlist is deleted.  
5
66 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Go To Music List  
Press the …† buttons to select the Go To Edit  
5
Playlist, then press the ENTER or  
button.  
Press the ANYKEY button during the Playlist  
1
2
playback.  
Edit Playlist  
CD  
CDDA  
01.  
02.  
03.  
04.  
TRACK 1  
TRACK 3  
TRACK 7  
TRACK 4  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
CDDA  
Playlist  
CD  
TRACK  
1
» 02 : 10  
Playlist 1  
TRACK 1  
CDDA  
CDDA  
CDDA  
TRACK 2  
TRACK 3  
TRACK 4  
1/1 Page  
RETURN  
1/3 Page  
MOVE  
PLAYLIST  
01/04  
Add  
EXIT  
Go To Music List  
New Playlist  
MOVE  
1/1 Page  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select tracks in the order  
in which you want them to play, then press the  
ENTER button.  
6
7
8
Press the …† buttons to select Go To Music List  
then press the ENTER or button.  
,
To remove a track from the Playlist, press the  
…† buttons to select the track, then press the  
ENTER or CANCEL button.  
Music List  
CD  
TRACK  
1
02 : 10  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
CDDA  
CDDA  
CDDA  
CDDA  
CD-DA  
CDDA  
CDDA  
To store the playlist, press the ANYKEY button.  
01/15  
04:57  
1/3 Page  
MOVE  
SELECT  
RETURN  
EXIT  
Make Playlist  
CD  
01.  
02.  
03.  
TRACK 1  
TRACK 3  
TRACK 7  
CDDA TRACK 1  
CDDA  
TRACK 2  
CDDA  
CDDA  
CDDA  
CDDA  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
Delete  
Go To Playlist  
1/1 Page  
RETURN  
MOVE  
SELECT  
EXIT  
Press the …† buttons to select the Go To  
Playlist, then press the ENTER button.  
Playlist will be edited.  
9
English - 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select Tray  
Playing a Picture  
Press the ANYKEY button.  
1
2
Music List  
CD  
Bryan Adams.mp3 » 02 : 10  
..  
Bryan Adams.mp3  
MP3 Bryan Adams_2.mp3  
MP3 Straight from the heart.mp3  
MP3 Run to you.mp3  
MP3 Heaven.mp3  
Play Mode  
Go To Playlist  
MP3 This Love.mp3  
New Playlist  
Selet Tray  
Insert a JPEG disc or Mixed disc (JPEG + MP3) into the  
disc tray.  
1/2 Page  
1
MOVE  
SELECT  
RETURN  
EXIT  
Title  
CD  
Title  
Press ENTER or Right button  
for Title List.  
Music  
Press the …† buttons to select Select Tray then  
press the ENTER or button.  
Photo  
Timer Record  
Setup  
Music List  
MOVE  
SELECT  
RETURN  
EXIT  
CD  
Bryan Adams.mp3 » 02 : 10  
..  
Bryan Adams.mp3  
MP3 Bryan Adams_2.mp3  
MP3 Straight from the heart.mp3  
MP3 Run to you.mp3  
MP3 Heaven.mp3  
Play Mode  
Go To Playlist  
New Playlist  
Recorder Tray  
Press the …† buttons to select Photo, then press the  
Player Tray  
Selet Tray  
2
ENTER or  
button.  
MOVE  
SELECT  
RETURN  
EXIT  
Photo List  
Index: 1/10  
CD  
DSC01194  
Press the …† buttons to select Recorder Tray or  
Player Tray then press the ENTER or button.  
..  
DSC01189  
DSC01190  
DSC01191  
DSC01199  
3
DSC01192  
DSC01193  
DSC01194  
1/2 Page  
SELECT  
MOVE  
RETURN  
EXIT  
Press the …† œ √ buttons to select a picture.  
3
To see the next 8 pictures, press the SKIP(  
)
button.  
To see the previous 8 pictures, press the  
SKIP( ) button.  
■■  
This unit can play JPEG files in CD-R/RW  
and DVD-R/-RW/-RAM.  
NOTE  
■■  
■■  
If a disc contains only MP3 files or only  
JPEG files, the MP3 or JPEG screen  
appears after the disc is loaded.  
If a disc contains a mix of MP3 and JPEG  
files, you need to select Music for MP3  
files or Photo for JPEG files.  
68 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slide Show  
Rotate  
To set up, follow steps 1~3 in page 68.  
To set up, follow steps 1~3 in page 68.  
Press the ANYKEY button.  
Press the ENTER button to select you want to  
4
4
5
6
see the picture, then press the ANYKEY button.  
Photo List  
CD  
DSC01194  
Index: 1/10  
DSC01191  
DSC01199  
..  
DSC01189  
DSC01190  
Slideshow  
Rotate  
Slide Show  
Select Tray  
93  
DSC01194  
Zoom  
1/2 Page  
Go To Photo List  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select Slide Show,  
Press the …† buttons to select Rotate, then  
press the ENTER or button.  
5
then press the ENTER or  
button.  
Photo List  
Index: 1/10  
CD  
DSC01194  
..  
DSC01189  
DSC01190  
DSC01191  
C01199  
Slideshow  
Rotate  
Rotate 90  
Rotate 180  
Rotate 270  
Slow  
Zoom  
Normal  
Slide Show  
Select Tray  
Go To Photo List  
Fast  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select the slide show  
speed, then press the ENTER or  
Press the …† buttons to select the rotate angle,  
then press the ENTER or button.  
6
button.  
The slide show starts.  
- To stop the Rotate -  
- To stop the Slide Show -  
Press the ANYKEY button.  
Press the ANYKEY button.  
1
1
Rotate  
Rotate Off  
Go To Photo List  
Rotate  
Slideshow Off  
Go To Photo List  
Press the …† buttons to select Rotate Off, then  
press the ENTER or button.  
2
Press the …† buttons to select Slideshow Off,  
then press the ENTER or button.  
2
English - 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zoom  
Go To Photo List  
To set up, follow steps 1~3 in page 68.  
To set up, follow steps 1~3 in page 68.  
Press the ENTER button to select you want to  
Press the ENTER button to select you want to see  
4
5
6
see the picture, then press the ANYKEY button.  
4
the picture, then press the ANYKEY button.  
Slideshow  
Rotate  
Slideshow  
Rotate  
Zoom  
Zoom  
Go To Photo List  
Go To Photolist  
Press the …† buttons to select Zoom, then  
press the ENTER or button.  
Press the …† buttons to select Go To Photo  
List, then press the ENTER or button.  
5
Photo List  
CD  
DSC01194  
Index: 1/10  
DSC01191  
DSC01199  
..  
DSC01189  
DSC01190  
DSC01192  
DSC01193 DSC01194  
1/2 Page  
MOVE  
SELECT  
RETURN  
EXIT  
Each time the ENTER button is pressed, the  
picture is enlarged up to x4(four times the  
normal size).  
X2 X4 X2 Normal  
- To stop the Zoom -  
Press the ANYKEY button.  
1
Zoom Off  
Go To Photo List  
Press the …† buttons to select Zoom Off, then  
2
press the ENTER or  
button.  
70 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Recording  
Recording  
This unit can record on various types of discs. Before  
recording, read the following instructions and select the  
disc type according to your preference.  
Recordable Discs  
This section shows various DVD Recording  
methods.  
This TWIN TRAY DVD RECORDER can record on the  
following discs.  
DVD-RAM  
DVD-RW  
DVD-R  
•DVD-RWs and DVD-RAMs are rewritable.  
DVD-Rs are non-rewritable  
Compatibility between Samsung and Other Company’s  
Recorder  
Disc Types  
Recording Recording Device Finalizing Additional Recording  
format  
in Samsung Recorder  
Recordable  
Samsung  
X
X
DVD-RAM  
VR Mode  
Recordable  
Other Company  
finalized  
not finalized  
finalized  
Not recordable  
Recordable  
Not recordable  
Recordable  
Samsung  
VR Mode  
V Mode  
Other Company  
DVD-RW  
not finalized  
finalized  
not finalized  
Not recordable  
Recordable  
Not recordable  
Not recordable  
Samsung  
finalized  
not finalized  
finalized  
Other Company  
Samsung  
Not recordable  
Recordable  
Not recordable  
not finalized  
V Mode  
DVD-R  
finalized  
Before Recording . . . . . . . . . . . . . . . . . . . . . . . . .71  
Other Company  
Not recordable  
not finalized  
Recording the current TV  
program you are watching . . . . . . . . . . . . . . . . . . .73  
ꢀꢀ  
ꢀꢀ  
Finalize  
- This closes the DVD-RW/-R so no  
additional recording can be done.  
Unfinalize  
Recording from external equipment  
NOTE  
you are watching . . . . . . . . . . . . . . . . . . . . . . . . . .74  
Copying from a Camcorder . . . . . . . . . . . . . . . . . .75  
Making an One Touch Recording (OTR) . . . . . . . .76  
Making a Timer Recording . . . . . . . . . . . . . . . . . .77  
Flexible Recording (for Timer recording only) . . . .79  
Editing the Timer Record List . . . . . . . . . . . . . . . .79  
Deleting a Timer Record List . . . . . . . . . . . . . . . . .80  
- This allows additional recording on a  
DVD-RW disc originally recorded on the  
TWIN TRAY DVD RECORDER.  
- A DVD-RW disc that has been recorded  
by DAO(Disc At Once) in a PC cannot be  
unfinalized.  
- A DVD-RW disc that has been recorded  
in Video Mode of a different maker’s  
recorder cannot be unfinalized.  
- A DVD-R disc cannot be unfinalized.  
English - 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Formats  
Recording Mode  
Select one of four recording modes by pressing the  
REC MODE button repeatedly while the unit is in Stop  
mode for the desired recording time and picture quality.  
In general, picture quality improves as the recording time  
decreases. In FR mode, the most suitable record mode  
is adjusted automatically, according to remaining time on  
the disc and length of the timer recording. This function is  
selected only one mode in XP, SP, LP and EP modes  
and you can use this mode for timer recording.  
When you insert a new, unused disc, the following  
message appears. Since available functions differ  
depending on the disc type, select a disc that best fits  
your preferences.  
DVD-RAM: Use after formatting the disc.  
Unformatted Disc  
Recording Times  
Recording Mode  
Characteristic  
Do you want to format this disc?  
DVD-RAM/-RW/-R  
Approx. 1 hour  
Yes  
No  
Select when the  
video quality is  
important.  
XP  
(high quality mode)  
about 8.5 Mbps  
SP  
Select to record in  
standard quality.  
Approx. 2 hours  
about 4.5 Mbps  
(standard quality mode)  
DVD-RW: When a new, unused DVD-RW disc is first  
inserted, the message “Uninitialized Disc Do  
you want to initialize this disc?” will be  
displayed. If you select Yes, the disc will be  
initially formatted in VR mode.  
Select when a long  
recording time is  
required.  
Approx. 4 hours  
about 2 Mbps  
LP  
(long recording mode)  
Approx. 6 hours/  
about 1.6 Mbps  
Approx. 8 hours/  
about 1.2 Mbps  
If you want to change the mode later, refer to  
Formatting a Disc on page 105.  
Select when a longer  
recording time is  
required.  
EP  
(extended mode)  
FR  
For timer recording only  
See page 79.  
Approx 1~6 hours  
(Flexible Recording)  
Uninitialized Disc  
Do you want to initialize this disc?  
Yes  
No  
ꢀꢀ  
Recording time may vary according to  
specific conditions.  
NOTE  
DVD-R: Formatting DVD is unnecessary and only Video  
Mode Recording is supported.  
DVD-RW(V mode)/-R  
• Chapters will be created automatically when you finalize  
recording on DVD-RW/-R discs in Video mode.  
The chapter’s length (interval between chapters) varies  
according to the recording mode.  
• Simple editing (erasing titles/changing title name)  
DVD-RAM/-RW(VR mode)  
• This mode allows multiple editing functions (such as  
deletion of the whole title, partial deletion of a title, etc.)  
• Various editing options using a created Playlist.  
72 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unrecordable video  
Recording the current TV  
program you are watching  
Video with copy protection cannot be recorded on this  
TWIN TRAY DVD RECORDER.  
When the TWIN TRAY DVD RECORDER receives a copy  
guard signal while recording, recording stops and the  
following message appears on the screen.  
Check that the disc has enough available space for the  
recording. Adjust the recording mode.  
You cannot record copy protected movie.  
Press the RECORDER button on the front panel or R  
1
button on the remote control. Press the OPEN/CLOSE  
button and place a recordable disc on the disc tray.  
Press the OPEN/CLOSE button to close the disc tray.  
Wait until LOAD disappears from the front panel display.  
Concerning Copy Control Signals  
TV broadcasts that contain copy control signals may have one  
of the following three signal types, Copy-Free, Copy-Once and  
Copy-Never. If you want to record a copy-once type program,  
use DVD-RW with CPRM in VR Mode and DVD-RAM.  
If an unused DVD-RAM disc is used, you will be  
prompted to format first. Make your selection using the  
œ √ buttons, then press ENTER button. (See page 72)  
Signal type  
Copy-Free  
Copy-Once  
-
Copy-Never  
-
Media  
DVD-RW(Ver.1.1)  
O
DVD-RW(Ver.1.1)  
with CPRM  
VR mode  
Unformatted Disc  
Do you want to format this disc?  
Yes  
No  
O
O
O
O
O
*
*
-
-
-
-
V mode  
DVD-R  
If an unused DVD-RW disc is used, whether to initialize  
or not will be asked first. Make your selection, using  
DVD-RAM(Ver.2.0)  
O
This * marked parts are compatible with CPRM.  
the œ √ buttons, then press the ENTER button.(See  
page 72)  
Once “Copy Once” has been recorded, recording  
cannot be done anymore.  
- Content Protection for Recordable Media (CPRM)  
CPRM is a mechanism that ties a recording to the media on  
which it is recorded. It is supported by some DVD  
RECORDERs, but not by many DVD players. Each blank  
recordable DVD has a unique 64-bit media ID etched in the  
BCA. When protected content is recorded onto the disc, it can  
be encrypted with a 56-bit C2 (Cryptomeria) cipher derived  
from the media ID.  
Uninitialized Disc  
Do you want to initialize this disc?  
Yes  
No  
During playback, the ID is read from the BCA and used to  
generate a key to decrypt the contents of the disc. If the  
contents of the disc are copied to other media, the ID will be  
absent or wrong and the data will not be decryptable.  
Press the CH (  
) or number buttons to select  
2
the current program you want to record.  
English - 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
ꢀꢀ  
ꢀꢀ  
ꢀꢀ  
ꢀꢀ  
You cannot change the recording mode  
and the channel while recording.  
Press the REC MODE button repeatedly, (or press the  
REC MODE button and then press the …† buttons) to  
select the recording speed (quality).  
NOTE  
3
Recording will stop automatically if there is  
no free space left for recording.  
SP LP EP XP  
Up to 99 titles can be recorded onto a  
disc.(DVD-RAM/-RW/-R)  
Recording will stop automatically if a copy  
protected image is selected.  
Record Mode SP 031:39  
DVD-RAM/-RW discs must be formatted  
before starting to record. Most new discs  
are sold unformatted.  
ꢀꢀ  
Do not use DVD-R authoring discs with  
this TWIN TRAY DVD RECORDER.  
Press the REC button.  
4
Information concerning the channel is displayed  
on the screen, then recording begins.  
Icon( ) is displayed on the front panel.  
Recording from external  
equipment you are watching  
Recording CH 11 [Mono]  
:
Before you start  
Check that the disc has enough available space for the  
recording. Adjust the recording mode.  
- To pause recording -  
Press the RECORDER button on the front panel or R  
button on the remote control. Press the OPEN/CLOSE  
• Press the REC PAUSE button to pause a recording  
in progress.  
1
button and place a recordable disc on the disc tray.  
Press the OPEN/CLOSE button to close the disc tray.  
Wait until LOAD disappears from the front panel display.  
If an unused DVD-RAM disc is used, whether to format  
or not will be asked first. (See page 72)  
• Press the REC PAUSE button again during pause to  
resume recording.  
• You can switch channels by pressing the  
CH (  
) buttons while recording pauses.  
If an unused DVD-RW disc is used, whether to initialize  
or not will be asked first. (See page 72)  
- To stop recording -  
Press the INPUT button to select the input source  
2
according to the connection you made.  
The front panel display changes in the following  
sequence:  
Press the STOP ( ) button to stop or finish a  
recording in progress.  
When using DVD-RAM/-RW/-R discs, the message  
“Updating the information of disc. Please wait for a  
moment” is displayed.  
CH Number AV 1 AV 2 DV  
If you connect a digital camcorder, press the INPUT  
button to select DV. (See pages 75~76)  
74 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the REC MODE button repeatedly, (or press  
Copying from a Camcorder  
3
4
the REC MODE button, then press the …† buttons)  
to select the recording speed (quality).  
SP LP EP XP  
Record Mode SP 031:39  
You may control the Camcorder using the IEEE1394 (DV)  
interface.  
Connect the DV output jack of your camcorder to the  
DV input jack on the front of your TWIN TRAY DVD  
Press the REC button  
.
1
RECORDER using a DV cable.  
Information concerning the external input mode is  
displayed on the screen, then recording begins.  
Icon( ) is displayed on the front panel.  
Press the RECORDER button on the front panel or R  
button on the remote control. Press the OPEN/CLOSE  
2
button and place a recordable disc on the disc tray.  
Press the OPEN/CLOSE button to close the disc tray.  
Wait until LOAD disappears from the front panel display.  
- To pause recording -  
• Press the REC PAUSE button to pause a recording  
in progress.  
• Press the REC PAUSE button again during pause to  
resume recording.  
Press the REC MODE button repeatedly to select  
the recording speed(quality).  
• You can switch channels by pressing the  
3
CH (  
) buttons while recording pauses.  
SP LP EP XP  
- To stop recording -  
Press the STOP ( ) button to stop or finish a  
Record Mode SP 031:39  
recording in progress.  
When using DVD-RAM/-RW/-R discs, the  
message “Updating the information of disc.  
Please wait for a moment” is displayed.  
English - 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the INPUT button to select DV.  
If the input is set to DV, a playback/record menu that  
enables camcorder control appears on the top of the  
screen.  
Making a One Touch  
Recording (OTR)  
4
DV  
The DV device is connected.  
You can set the TWIN TRAY DVD RECORDER to record  
in 30-minute increments up to 8 hours by pressing the REC  
button.  
MOVE  
SELECT  
RETURN  
Press the RECORDER button on the front panel or R  
button on the remote control. Press the OPEN/CLOSE  
1
Select the Play () icon on the upper part of the  
screen to playback the camcorder and find the  
starting position to copy.  
button and place a recordable disc on the disc tray.  
Press the OPEN/CLOSE button to close the disc tray.  
Wait until LOAD disappears from the front panel display.  
5
6
You can press the PLAY  
(
)
button of the remote  
control to play the camcorder.  
If you want to record a TV channel, press the  
CH (  
) buttons or number buttons to select a  
2
3
To start recording, use the œ √ buttons to select  
Record ( ) icon in the top side of the screen, then  
press the ENTER button.  
You can press the REC button of the remote control  
to start recording. To display playback related icons  
on the screen, press any direction button on the  
remote control.  
desired channel. If you want to record through a  
connected external equipment, press the INPUT  
button to select an appropriate external input (AV 1,  
AV 2, DV or CH 01).  
Press the REC button to start recording.  
Recording CH 11 [Mono]  
:
- To stop recording -  
Press the STOP ( ) button to stop or finish a  
recording in progress.  
When using DVD-RAM/-RW/-R discs, the  
message “Updating the information of disc.  
Please wait for a moment” is displayed  
Press the REC button repeatedly to adjust the  
desired recording time.  
4
0:30 1:00 ... 8:00 Off  
OTR Mode  
0:30  
76 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
The timer counter decreases by the  
minute from 8:00 to 0:00, then the TWIN  
TRAY DVD RECORDER stops recording.  
NOTE  
Making a Timer  
Recording  
- To stop recording -  
Press the STOP ( ) button. The message “Do you  
want to stop recording?” is displayed.  
1. Check the antenna cable is connected.  
2. Check the remaining time of the disc.  
3. Check the date and time are correct.  
Press the œ √ buttons to select Yes, then press the  
ENTER button, or press the STOP (  
)
button again.  
Make sure the Clock (Setup-Clock Set) is set before  
you proceed with a timer recording. (See pages 26~28)  
About INFO button  
During recording, press the INFO button once, Disc  
information screen appears.: Displays Total numbers of  
Titles and Playlists, Recordable Time, Available  
Space(Music/Photo).  
Using the TIMER button  
Press the RECORDER button on the front panel or R  
button on the remote control.  
With the unit in Stop mode/Playback mode,  
press the TIMER button.  
1
DVD-RAM(VR)  
Disc Name  
Total Title  
Disc Info  
MY VIED  
25  
The Timer Record List screen is displayed.  
Total Playlist  
Recordable Time  
Protection  
2
17:12 XP  
Not Protected  
Timer Rec.List  
JAN/01/2005 (SAT)  
AM 12:00  
DVD-RAM(VR)  
Current Time 11:00 AM  
No.  
Source  
Date  
Start  
End  
Mode  
Add a list  
Press the INFO button twice: Current recording  
information screen appears and displays recording Name,  
Title, Created Time and Recording Time information.  
Available Time  
DVD  
29:10 SP  
SELECT  
MOVE  
RETURN  
EXIT  
DVD-RAM(VR)  
Name  
Recording Info  
JAN/01/2005 12:00 AM  
CH 11  
Using the MENU button.  
• With the unit in Stop mode/Playback mode, press  
the MENU button.  
Recording Title  
Created Time  
4
JAN/01/2005 12:00 AM  
00:13:27  
Time  
Recording  
• Press the …† buttons to select Timer Record,  
then press the ENTER or button.  
JAN/01/2005 (SAT)  
AM 12:00  
Press the ENTER button to select Add a list.  
2
The Timer Record List screen is displayed.  
Timer Rec.List  
DVD-RAM(VR)  
Current Time 11:00 AM  
No. Source  
Title No. 01  
Date  
Start  
End  
Mode  
Start  
Source  
Date  
01 JAN  
End  
Mode  
SP  
AV2  
11  
:
00 AM  
02 : 00 PM  
Save  
Available Time  
Available Time  
DVD  
DVD  
29:10 SP  
29:10 SP  
SELECT  
MOVE  
RETURN  
EXIT  
English - 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the ANYKEY button.  
• Press the ANYKEY button.  
After selecting the set up value for each mode, press the  
• Press the …† buttons to select Add, then press  
the ENTER or button.  
ENTER button to select Save, and press the ENTER  
4
button again.  
will appear on the front panel. It means that a  
timer recording is registered.  
Set timer recording option.  
If the timer settings overlap;  
3
Fill the input items using the …†œ √ buttons and  
The programs are recorded in order of priority.  
If timer recording is set for the first program and  
then again for the second program and both  
programs overlap, the following message will  
appear on the screen: “This setting is identical with  
1.” The message shows that the first program  
has priority. After recording of the first program is  
complete, the second program starts being  
recorded.  
number buttons.  
œ √ : Moves to the previous/next item.  
…† 0~9 : Sets a value.  
Source : The video input source (AV1, AV2), or the  
broadcasting channel you want to make a timer  
recording from.  
Date : Timer Recording allows setting the  
recording time within one month period. Set the  
recording day. (day/month)  
To exit without saving the current setting  
Press the MENU button.  
To return to the previous menu  
Press the RETURN button if you don’t want to set a  
timer recording.  
01 JAN  
02 JAN  
03 JAN  
Every Day  
MON-SAT  
MON-FRI  
Every SAT  
30 JAN  
31 JAN  
Press the MENU button to finish the Timer Recording  
setting.  
Every SUN  
5
Start/End Time : Start and end time of the timer  
recording.  
The timer recording time may differ from  
the set time depending on disc status and  
overall timer recording status (for example,  
recording times overlapping, or when the  
previous recording ends within 2 minutes  
before the start time of the next recording.)  
Mode (Recording Mode) :  
NOTE  
- FR (Flexible Recording) : Select when you want to  
set video quality automatically. In FR mode, the  
most suitable record mode is adjusted automatically,  
according to remaining time on the disc and length  
of the timer recording.  
You can set up to 12 Timer Recordings.  
- XP (high quality) : Select when video quality is  
important.  
- SP (standard quality) : Select to record in standard  
quality.  
- LP (low quality) : Select when a long recording time  
is required.  
- EP (extended) : Select when a longer recording time  
is required.  
ꢀꢀ  
When you are recording at EP mode on a  
DVD-RW(V mode)/-R disc, it may not  
record the full 6 or 8 hours because the  
unit uses the VBR(Variable Bit Rate)  
ENCODING system. For example, if you  
record a program with a lot of action, it  
uses a higher bit rate which in turn  
consumes more disc memory.  
NOTE  
78 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select the number of the  
Timer Record List you want to edit, then press the  
ANYKEY button.  
Flexible Recording  
(for Timer recording only)  
2
3
• The Add, Edit and Delete items are displayed.  
Timer Rec.List  
DVD-RAM(VR)  
Current Time 11:00 AM  
No.  
Source  
Date  
Start  
End  
Mode  
01  
02  
03  
CH 04  
01 JAN  
15 JAN  
01 JAN  
11  
11: 10 AM  
15 10 AM  
:
00 AM  
02  
:
:
:
00PM  
SP  
SP  
SP  
AV  
2
01  
02  
30PM  
30PM  
In FR mode, the most suitable record mode is adjusted  
automatically, according to remaining time on the disc  
and length of the timer recording.  
CH 04  
:
Add a list  
Add  
Edit  
Delete  
29:10 SP  
SELECT  
The FR mode recording setup is the same as Timer  
Recording. When setting the mode in step 4, set the FR  
mode.  
MOVE  
RETURN  
EXIT  
Press the …† buttons to select Edit, then press the  
ENTER or button.  
• The Timer Record Input item is displayed.  
Edit the items you want to modify. See the “Making a  
Timer Recording” section for more information on  
Timer Recording Input items.(See pages 77~78)  
Editing the Timer  
Record List  
Timer Rec.List  
DVD-RAM(VR)  
Current Time 11:00 AM  
No. Source  
Title No. 02  
Date  
Start  
End  
Mode  
Follow these directions to edit the timer record list.  
Start  
Source  
Date  
01 JAN  
End  
Mode  
SP  
AV2  
11  
:
00 AM  
02 : 00 PM  
Save  
Available Time  
DVD  
DVD  
MOVE  
29:10 SP  
Available Time  
29:10 SP  
SELECT  
RETURN  
EXIT  
Using the TIMER button  
Press the ENTER button to select Save, then press  
Press the RECORDER button on the front panel or R  
button on the remote control.  
With the unit in Stop mode/Playback mode, press  
the TIMER button.  
The Timer Record List screen is displayed.  
4
5
the ENTER button to confirm the edited setting.  
1
Press the MENU button after finishing the operation.  
The Timer Record List screen will disappear.  
Timer Rec.List  
DVD-RAM(VR)  
Current Time 11:00 AM  
No.  
Source  
Date  
Start  
End  
Mode  
01  
02  
03  
CH 04  
01 JAN  
15 JAN  
01 JAN  
11  
11: 10 AM  
15 10 AM  
:
00 AM  
02  
:
:
:
00PM  
SP  
SP  
SP  
AV  
2
01  
02  
30PM  
30PM  
CH 04  
:
Add a list  
Available Time  
DVD  
29:10 SP  
SELECT  
MOVE  
RETURN  
EXIT  
Using the MENU button.  
• With the unit in Stop mode/Playback mode, press  
the MENU button.  
• Press the …† buttons to select Timer Record,  
then press the ENTER or button.  
English - 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select Delete, then press  
the ENTER or button.  
You will be prompted with the delete confirm  
message such as “Do you want to delete No.02?”.  
Deleting a Timer  
Record List  
3
Timer Rec.List  
Follow these directions to delete an entry from the timer  
record list.  
Current Time 11:00 AM  
DVD-RAM(VR)  
No. Source  
Date  
Start  
End  
Mode  
0
0
0
Do you want to delete No.02?  
Yes  
No  
Available Time  
DVD  
29:10 SP  
SELECT  
MOVE  
RETURN  
EXIT  
Using the TIMER button  
Press the œ √ buttons to select Yes, then press the  
ENTER button.  
• The selected entry will be deleted from the list.  
4
5
Press the RECORDER button on the front panel or R  
button on the remote control.  
With the unit in Stop mode/Playback mode, press  
the TIMER button. The Timer Record List screen is  
displayed.  
1
Timer Rec.List  
DVD-RAM(VR)  
Current Time 11:00 AM  
No.  
Source  
Date  
Start  
End  
Mode  
01  
02  
CH 04  
01 JAN  
15 JAN  
11  
11: 10 AM  
Add a list  
:
00 AM  
02  
01  
:
:
00PM  
30PM  
SP  
SP  
AV  
2
Timer Rec.List  
DVD-RAM(VR)  
Current Time 11:00 AM  
No.  
Source  
Date  
Start  
End  
Mode  
Available Time  
DVD  
29:10 SP  
SELECT  
01  
02  
03  
CH 04  
01 JAN  
15 JAN  
01 JAN  
11  
11: 10 AM  
15 10 AM  
:
00 AM  
02  
:
:
:
00PM  
SP  
SP  
SP  
MOVE  
RETURN  
EXIT  
AV  
2
01  
02  
30PM  
30PM  
CH 04  
:
Add a list  
Available Time  
DVD  
29:10 SP  
SELECT  
MOVE  
RETURN  
EXIT  
Press the MENU button after finishing the operation.  
The Timer Record List screen will disappear.  
Using the MENU button.  
• With the unit in Stop mode/Playback mode, press  
the MENU button.  
• Press the …† buttons to select Timer Record,  
then press the ENTER or button.  
Press the …† buttons to select the number of the  
Timer Record List you want to delete, and then  
press the ANYKEY button.  
2
• The Add, Edit and Delete items are displayed.  
Timer Rec.List  
DVD-RAM(VR)  
Current Time 11:00 AM  
No.  
Source  
Date  
Start  
End  
Mode  
01  
02  
03  
CH 04  
01 JAN  
15 JAN  
01 JAN  
11  
11: 10 AM  
15 10 AM  
:
00 AM  
02  
:
:
:
00PM  
SP  
SP  
SP  
AV  
2
01  
02  
30PM  
30PM  
CH 04  
:
Add a list  
Add  
Edit  
Delete  
29:10 SP  
SELECT  
MOVE  
RETURN  
EXIT  
80 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
This section introduces basic functions of  
editing and explains both edit functions for the  
recording on a disc and edit functions for the  
entire disc.  
Title List  
A title is a section of recorded video and audio.  
Title List shows a list to help you select a title.  
Since the title consists of the information on stream that  
is actually recorded, if one title is deleted, that title  
cannot be played again.  
Play List  
This refers to a unit of playback, which is made by  
selecting a desired scene in the entire Title List.  
When one playlist is played, only the scene selected by  
the user will play and then stop. Since only the  
information necessary for playing a desired scene is  
included in a playlist, even if that playlist is deleted, the  
original stream will not be deleted.  
Basic Editing (Title List) . . . . . . . . . . . . . . . . . . . . .82  
Advanced Editing (Playlist) . . . . . . . . . . . . . . . . . .87  
Title Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95  
Copying Multiple Titles at One Time . . . . . . . . . . .99  
Disc Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Disc Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . .103  
Recording or editing might not be completed if an  
error, such as a sudden power failure occurs.  
Please be aware that a title that has been damaged  
cannot be retrieved.  
■■  
Edit functions of Title List and Play List are  
available only in the R Tray.  
NOTE  
English - 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select Rename, then press  
the ENTER or button.  
The Rename screen is displayed.  
Basic Editing (Title List)  
4
5
Rename  
DVD-RAM(VR)  
JAN / 1 8 / 2005 12:15 AM CH 11  
Renaming(Labeling) a Title  
Follow these instructions to rename a title list entry,  
i.e., to edit the name of a recorded program.  
Back Space  
MOVE  
Space Delete  
SELECT  
Clear Save  
RETURN EXIT  
Using the TITLE LIST button  
Select the desired characters using the …† œ √  
buttons, press the ENTER button to select the  
character.  
Press the RECORDER button on the front panel or R  
1
2
button on the remote control.  
Rename  
DVD-RAM(VR)  
Sports(A1)  
With the unit in Stop mode/Playback mode, press the  
TITLE LIST button.  
The Title List screen is displayed.  
Back Space  
MOVE  
Space Delete  
SELECT  
Clear Save  
RETURN EXIT  
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Back Space: Deletes and moves the cursor  
backwards by one position.  
Space: Enters a blank and moves the cursor one  
forward (to the right).  
Delete: Deletes the character at the cursor position.  
Clear: Deletes all the character inputs.  
Save: Registers the character inputs.  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
SP  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
Using the MENU button.  
• With the unit in Stop mode/Playback mode, press  
the MENU button.  
Press the …† œ √ buttons to select Save, and then  
press the ENTER button.  
The changed title name is displayed.  
Press the …† buttons to select Title,  
then press the ENTER or button.  
6
Title List  
Press the …† buttons to select an entry you want to  
rename from the Title List, then press the ANYKEY  
button.  
DVD-RAM(VR)  
No.  
Title  
Length  
01  
02  
03  
04  
Sports(A1)  
00:10:21  
3
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Sports(A1)  
Title List  
JAN/18/2005 12:15 AM  
DVD-RAM(VR)  
No.  
Title  
Length  
SP  
1/1 Page  
Rename  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Protection  
Delete  
MOVE  
SELECT  
RETURN  
EXIT  
Partial Delete  
Playlist  
Navigation  
Select Tray  
1/1 Page  
Disc Manager  
MOVE  
SELECT  
RETURN  
EXIT  
82 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locking (Protecting) a Title  
Follow these instructions to lock a Title to protect it from  
accidental deletion.  
Press the …† buttons to select Protection, then press  
the ENTER or button.  
4
5
Title List  
DVD-RAM(VR)  
Title Protection:  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
On  
Off  
Using the TITLE LIST button  
SP  
MOVE  
SELECT  
RETURN  
EXIT  
Press the RECORDER button on the front panel or R  
button on the remote control.  
1
2
Press the œ √ buttons to select On, then press the  
ENTER button. The key icon on the information  
window for the selected entry changes to the locked  
With the unit in Stop mode/Playback mode, press the  
TITLE LIST button .  
The Title List screen is displayed.  
status.  
(
)
Title List  
Title List  
Length  
DVD-RAM(VR)  
No.  
Title  
Length  
DVD-RAM(VR)  
No.  
Title  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
SP  
SP  
1/1 Page  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Using the MENU button.  
Deleting a Title  
• With the unit in Stop mode/Playback mode, press  
the MENU button.  
Follow these instructions to delete a title from the  
Title List.  
Press the …† buttons to select Title, then  
press the ENTER or button.  
Press the …† buttons to select a Title you want to  
protect from the Title List, then press the ANYKEY  
button.  
3
Using the TITLE LIST button  
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
Press the RECORDER button on the front panel or R  
button on the remote control.  
Rename  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
1
Protection  
Delete  
Partial Delete  
Playlist  
Navigation  
Select Tray  
1/1 Page  
Disc Manager  
MOVE  
SELECT  
RETURN  
EXIT  
English - 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
With the unit in Stop mode/Playback mode, press the  
TITLE LIST button.  
The Title List screen is displayed.  
Press the œ √ buttons to select Yes, then press the  
ENTER button.  
2
5
Title List  
DVD-RAM(VR)  
Title List  
No.  
Title  
Length  
DVD-RAM(VR)  
Deleting...  
(Please wait)  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
SP  
SP  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
Title List  
Using the MENU button.  
No.  
Title  
Length  
DVD-RAM(VR)  
01  
02  
03  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
• With the unit in Stop mode/Playback mode, press  
the MENU button.  
Press the …† buttons to select Title,  
then press the ENTER or button.  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
SP  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select a title that you want to  
3
4
delete in the Title List, then press the ANYKEY button.  
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
■■  
■■  
You cannot delete a protected entry. If you  
want to delete a protected entry, select  
“Off” in the Title Protection menu. (See  
page 83)  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Rename  
NOTE  
Protection  
Delete  
Partial Delete  
Playlist  
Navigation  
When the Cartridge Protection or Disc  
Protection has been set to Protected, you  
cannot delete titles. (See page 6 and 105)  
Select Tray  
1/1 Page  
Disc Manager  
MOVE  
SELECT  
RETURN  
EXIT  
■■  
■■  
Once an entry is deleted from the Title List  
it cannot be recovered.  
Press the …† buttons to select Delete, then press the  
ENTER or button.  
Once DVD-RW/-R is finalized, it cannot be  
deleted.  
Title List  
DVD-RAM(VR)  
Do you want to delete?  
(Related playlists  
may be deleted.)  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
Yes  
No  
SP  
MOVE  
SELECT  
RETURN  
EXIT  
The message may be different depending on the  
type of disc that you are using. You will be prompted  
with the confirmation message. DVD-RAM(VR  
mode), DVD-RW(VR mode): Since Playlist is  
present, the message “Do you want to delete?  
(Related playlists may be deleted.)” is displayed.  
DVD-RW(Video mode)/-R: Since Playlist is not  
present, the message “Do you want to delete?” is  
displayed.  
84 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select an entry you want to  
edit from the Title List, then press the ANYKEY button.  
Deleting a Section of a Title (Partial  
Delete)  
Follow these instructions to edit or delete a section  
of a Title List entry.  
3
4
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Rename  
Protection  
Delete  
Partlal Delete  
Playlist  
(VR mode)  
Navigation  
Select Tray  
1/3 Page  
Disc Manager  
MOVE  
SELECT  
RETURN  
EXIT  
Using the TITLE LIST button  
Press the …† buttons to select Partial Delete, then  
Press the RECORDER button on the front panel or R  
button on the remote control.  
press the ENTER or  
button.  
1
2
Partial Delete  
DVD-RAM(VR)  
JAN/18/2005 12:15 AM CH11  
Title List No. 01  
With the unit in Stop mode/Playback mode, press the  
TITLE LIST button.  
The Title List screen is displayed.  
Start  
End  
00:00:00  
00:00:00  
00:01:00  
Return  
Start  
End  
Delete  
MOVE  
SELECT  
RETURN  
EXIT  
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
SP  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
Using the MENU button.  
• With the unit in Stop mode/Playback mode,  
press the MENU button.  
Press the …† buttons to select Title,  
then press the ENTER or button.  
English - 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the  
buttons to select Delete, then press  
œ
Press the ENTER button at the starting point.  
The image and starting point time are displayed in the  
section deletion starting point window.  
7
the ENTER button. You will be asked: "Do you want  
to delete?".  
5
Partial Delete  
Partial Delete  
DVD-RAM(VR)  
JAN/18/2005 12:15 AM CH11  
Title List No. 01  
DVD-RAM(VR)  
JAN/18/2005 12:15 AM CH11  
Title List No. 01  
Start  
End  
Start  
End  
00:01:00  
00:06:35  
00:01:00  
00:00:00  
00:06:35  
Return  
Start  
End  
Delete  
00:01:00  
Return  
Start  
End  
Delete  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Partial Delete  
JAN/18/2005 12:15 AM CH11  
DVD-RAM(VR)  
Edit Title List Screen Elements  
Do you want to delete?  
(Deleted part will not be restored.)  
Partial Delete  
Yes  
No  
DVD-RAM(VR)  
JAN/18/2005 12:15 AM CH11  
S
Title List No. 01  
Start  
End  
MOVE  
SELECT  
RETURN  
EXIT  
00:01:00  
00:00:00  
00:06:35  
Return  
Start  
End  
Delete  
Press the  
buttons to select Yes, then press the  
œ
MOVE  
SELECT  
RETURN  
EXIT  
8
9
ENTER button. The selected section has been  
deleted.  
Playback bar  
Playtime  
Press the  
buttons to select Return, then press  
œ
Section deletion starting point window and time  
Section deletion end point window and time  
Select the start and end points of the section you  
want to delete using the playback related buttons.  
Playback related buttons :  
the ENTER button to finish the operation.  
(PLAY( ) SEARCH (  
))  
,
■■  
The length of the section to be deleted  
must be at least 5 seconds long.  
NOTE  
Press the ENTER button at the end point.  
The image and end point time are displayed in the  
Section deletion ending point window.  
If the length of the section to be deleted is  
6
less than 5 seconds, you will be prompted  
with the message “The range is too  
short.”.  
Partial Delete  
DVD-RAM(VR)  
JAN/18/2005 12:15 AM CH11  
Title List No. 01  
If the end time precedes the starting time,  
you will be prompted with the message  
“End point cannot be marked earlier than  
start point”.  
Start  
End  
00:01:00  
00:06:35  
00:06:35  
Return  
Press the MENU button after the operation has  
Start  
End  
Delete  
finished.  
MOVE  
SELECT  
RETURN  
EXIT  
The Title List screen will disappear.  
86 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the ANYKEY button.  
Press the …† buttons to select Playlist, then  
Advanced Editing  
(Playlist)  
3
4
press the ENTER or  
button.  
Title List  
Length  
No.  
Title  
DVD-RAM(VR)  
Rename  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Protection  
Delete  
Creating a Playlist  
Follow these instructions to create a new playlist entry  
from a recorded title.  
Partial Delete  
Playlist  
New Playlist  
Go To Playlist  
Navigation
Select Tray  
Disc Manager  
1/1 Page  
RETURN  
MOVE  
SELECT  
EXIT  
(VR mode)  
Press the …† buttons to select New Playlist,  
then press the ENTER or button.  
The Make Playlist screen is displayed.  
Using the TITLE LIST button  
Press the RECORDER button on the front panel or R  
Make Playlist  
DVD-RAM(VR)  
New Playlist  
Scene No. 01  
1
2
button on the remote control.  
Start  
End  
Title List 1/4  
With the unit in Stop mode/Playback mode, press the  
TITLE LIST button.  
The Title List screen is displayed.  
00:00:00  
00:00:00  
00:00:00  
Return  
Start  
End  
MOVE  
Make  
SELECT  
RETURN  
EXIT  
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Press the ENTER button at the start point.  
5
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
SP  
Make Playlist  
1/1 Page  
DVD-RAM(VR)  
New Playlist  
Scene No. 01  
MOVE  
SELECT  
RETURN  
EXIT  
Start  
End  
Title List 1/4  
00:00:10  
00:00:00  
Using the MENU button.  
00:00:10  
Return  
Start  
End  
MOVE  
Make  
• With the unit in Stop mode/Playback mode,  
press the MENU button.  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select Title,  
then press the ENTER or button.  
The image and time at the start point are displayed on  
the Start window.  
The yellow-colored selection bar moves to the End  
item.  
Select the starting point of the section from which you  
want to create a new scene using the playback  
related buttons (PLAY( ) SEARCH (  
)).  
,
English - 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Entries in the Playlist  
Follow these instructions to play the playlist entries.  
Press the ENTER button at the end point.  
6
7
Make Playlist  
DVD-RAM(VR)  
New Playlist  
Scene No. 01  
(VR mode)  
Start  
End  
Using the PLAY LIST button  
Title List 1/4  
00:00:10  
00:10:10  
00:10:10  
Return  
Start  
End  
MOVE  
Make  
SELECT  
RETURN  
EXIT  
Press the RECORDER button on the front panel or R  
1
2
button on the remote control.  
The image and end point time are displayed in the  
End window.  
The yellow-colored selection bar moves to the  
Make item.  
With the unit in Stop mode, press the PLAY LIST  
button.  
The Playlist screen is displayed.  
Press the œ √ buttons to select Make, then press the  
Playlist  
ENTER button.  
To make a scene for playlist.  
DVD-RAM(VR)  
No.  
Title  
Length  
01 Dolphin  
00:10:21  
02  
03  
04  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
A new Make scene screen is displayed.  
Repeat steps 3~6 to make scene of playlist.  
A new scene will be added to the current playlist.  
You can check and view all the scenes on Edit playlist  
screen. (See page 90)  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
1
Scene  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
To make a new playlist, repeat steps 1~6.  
Using the MENU button.  
Press the œ √ button to select Return,  
• With the unit in Stop mode, press the MENU  
button.  
8
then press the ENTER button to finish the operation.  
Press the …† buttons to select Title, then  
press the ENTER or button. The Title List  
screen is displayed.  
• Press the ANYKEY button.  
ꢀꢀ  
You can create up to 99 playlist entries.  
• Press the …† buttons to select Playlist, then press  
ꢀꢀ  
NOTE  
Depending on the type of disc used, the  
displayed Make Playlist screen may  
appear different.  
the ENTER or button.  
• Press the …† buttons to select Go To Playlist,  
then press the ENTER or button.  
Press the …† buttons to select the playlist you  
3
4
want to play, then press the ENTER or PLAY (  
button.  
)
Press the STOP ( ) button to stop playing.  
The screen returns to the Playlist screen.  
88 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Renaming a Playlist Entry  
Follow these instructions to rename a playlist entry, i.e.  
to edit the name of a playlist entry.  
Press the …† buttons to select the title you want to  
Rename from the Playlist, then press the ANYKEY  
button.  
ANYKEY menu is displayed : Rename, Delete, Edit  
Playlist, Go To Titlelist, Disc Manager  
3
(VR mode)  
Playlist  
DVD-RAM(VR)  
No.  
Title  
Length  
Using the PLAY LIST button  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Rename  
Delete  
Edit Playlist  
Press the RECORDER button on the front panel or R  
button on the remote control.  
Go To Titlelist  
DiscManager  
1/1 Page  
1
2
MOVE  
SELECT  
RETURN  
EXIT  
With the unit in Stop mode, press the PLAY LIST  
button.  
The Edit Playlist screen is displayed.  
Press the …† buttons to select Rename, then press  
the ENTER or button.  
The Rename screen is displayed.  
4
5
Playlist  
Rename  
DVD-RAM(VR)  
No.  
Title  
Length  
DVD-RAM(VR)  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
1 8 / JAN / 2005 12:15 AM  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
1
Scene  
1/1 Page  
Back Space  
MOVE  
Space Delete  
SELECT  
Clear Save  
RETURN EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Using the MENU button.  
• With the unit in Stop mode, press the MENU  
button.  
Select the desired characters using the …† œ √  
buttons, then press the ENTER button.  
Press the …† buttons to select Title,  
then press the ENTER or button.  
The Title List screen is displayed.  
Rename  
DVD-RAM(VR)  
Dolphin  
• Press the ANYKEY button.  
• Press the …† buttons to select Playlist, then press  
the ENTER or button.  
• Press the …† buttons to select Go To Playlist,  
then press the ENTER or button.  
Back Space  
MOVE  
Space Delete  
SELECT  
Clear Save  
RETURN EXIT  
This function is the same as the Rename function in  
the renaming the title. (See page 82)  
The maximum number of characters that can be  
entered is 31. All 31 characters can be displayed  
by pressing the INFO button.  
English - 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† œ √ buttons to select Save, then press  
the ENTER button.  
The changed title is displayed in the title field of the  
selected playlist entry.  
Press the …† buttons to select the title you want to  
edit from the Playlist, then press the ANYKEY button.  
The Edit Playlist menu is displayed: Rename, Delete,  
Edit Playlist, Go To Titlelist, Disc Manager.  
6
3
4
Playlist  
Playlist  
DVD-RAM(VR)  
No.  
Title  
Length  
DVD-RAM(VR)  
No.  
Title  
Length  
01 Dolphin  
00:10:21  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
02  
03  
04  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Rename  
Dolphin  
Delete  
18/JAN/2005 12:15 AM  
Edit Playlist  
6
Scenes  
1/1 Page  
Go To Titlelist  
DiscManager  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select Edit Playlist,  
Editing a Scene for the Playlist  
then press the ENTER or button.  
The Edit Playlist Scene screen is displayed.  
Follow these instructions to edit scenes for a playlist.  
Edit Playlist  
DVD-RAM(VR)  
Playlist No. 1  
(VR mode)  
01  
05  
00:00:26  
0:00:26  
02  
0:00:07  
03  
07  
00:06:04  
00:00:00  
04  
0:00:03  
Using the PLAY LIST button  
06  
00:01:07  
1/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Press the RECORDER button on the front panel or R  
1
2
button on the remote control.  
Playing a Selected Scene  
With the unit in Stop mode, press the PLAY LIST  
button.  
The Edit Playlist screen is displayed.  
Press the …†œ √ buttons to select the scene you  
want to play, then press the ANYKEY button.  
The playlist entry to be played is selected.  
5
Playlist  
DVD-RAM(VR)  
No.  
Title  
Length  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Edit Playlist  
Playlist No. 1  
0:00:03  
DVD-RAM(VR)  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
6
Scenes  
1/1 Page  
006  
0
007  
03  
07  
00:06:04  
00:00:00  
04  
Play  
MOVE  
SELECT  
RETURN  
EXIT  
Modify  
Move  
Add  
7  
Delete  
/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Using the MENU button.  
• With the unit in Stop mode, press the MENU  
button.  
Press the …† buttons to select Title, then  
press the ENTER or button.  
The Title List screen is displayed.  
Press the ANYKEY button.  
Press the …† buttons to select Playlist, then press  
the ENTER or button.  
Press the …† buttons to select Go To Playlist,  
then press the ENTER or button.  
90 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the ENTER button at the start point of the scene.  
Press the …† buttons to select Play, then press the  
ENTER or button.  
The selected scene is played.  
7
6
Modify Scene  
DVD-RAM(VR)  
JAN/16/2005 12:15  
Scene No. 001  
Start  
PLAY  
End  
00:00:20  
00:00:00  
00:00:20  
Cancel  
Title List : 1/7  
Start  
End  
Change  
MOVE  
SELECT  
RETURN  
EXIT  
The image and starting point time are  
displayed on the Start window.  
Select the starting or ending point of the  
section you want to modify using the playback  
To stop scene play, press the STOP ( ) button.  
related buttons (PLAY( ) SEARCH (  
)).  
,
Modifying a Scene (Replacing a Scene)  
Press the ENTER button at the end point of the scene.  
8
9
To setup, follow steps 1 to 4 in page 90.  
Modify Scene  
Press the …† œ √ buttons to select the scene you  
DVD-RAM(VR)  
JAN/16/2005 12:15  
5
want to modify, then press the ANYKEY button.  
Scene No. 01  
Start  
End  
00:00:20  
00:00:30  
00:00:30  
Cancel  
Title List : 1/7  
Edit Playlist  
Playlist No. 1  
DVD-RAM(VR)  
Start  
End  
Change  
MOVE  
SELECT  
RETURN  
EXIT  
01  
0:00:26  
02  
0:00:07  
03  
07  
00:06:04  
00:00:00  
04  
0:00:03  
Play  
Modify  
Move  
The image and ending point time are displayed  
in the End window.  
The yellow-colored selection bar moves to the  
Change item.  
Add  
7  
Delete  
/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Press the œ √ buttons to select Change, then press  
Press the …† buttons to select Modify, then press the  
ENTER or button.  
The Modify Scene screen is displayed.  
the ENTER button.  
6
Edit Playlist  
DVD-RAM(VR)  
Playlist No. 1  
Modify Scene  
01  
05  
00:00:10  
0:00:26  
02  
0:00:07  
03  
07  
00:00:10  
00:00:00  
04  
0:00:03  
DVD-RAM(VR)  
JAN/16/2005 12:15  
Scene No. 01  
Start  
End  
06  
00:01:07  
1/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
00:00:00  
00:00:00  
00:00:20  
Cancel  
Title List : 1/7  
Start  
End  
Change  
The scene you want to modify is changed with the  
selected section.  
MOVE  
SELECT  
RETURN  
EXIT  
English - 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Moving a Scene (Changing the Position of a Scene)  
Press the …† œ √ buttons to select the position  
to which you want to move the selected scene,  
then select the ENTER button.  
7
To setup, follow steps 1 to 4 in page 90.  
Edit Playlist  
DVD-RAM(VR)  
Playlist No. 1  
Press the …† œ √ buttons to select the scene you  
5
6
want to move (change the position), then press the  
ANYKEY button.  
01  
00:00:26  
00:00:26  
02  
00:00:07  
00:00:26  
03  
07  
00:00:04  
00:00:00  
04  
00:00:03  
05  
02  
1/1 Page  
SELECT  
Cancel  
EXIT  
Edit Playlist  
DVD-RAM(VR)  
Playlist No. 1  
MOVE  
RETURN  
01  
0:00:26  
02  
0:00:07  
03  
07  
00:06:04  
00:00:00  
04  
0:00:03  
Play  
Modify  
Move  
The selected scene is moved to the selected  
position.  
Add  
Delete  
/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Edit Playlist  
DVD-RAM(VR)  
Playlist No. 1  
01  
00:00:07  
00:00:26  
02  
00:00:04  
00:00:26  
03  
07  
00:00:03  
00:00:00  
04  
00:00:26  
Press the …† buttons to select Move, then press the  
ENTER or button.  
05  
06  
1/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Edit Playlist  
Playlist No. 1  
DVD-RAM(VR)  
01  
05  
00:00:26  
00:00:26  
02  
00:00:07  
00:01:07  
03  
07  
00:00:04  
00:00:00  
04  
00:00:03  
ꢀꢀ  
Depending on the type of disc you are  
using, the displayed screen may appear  
slightly different.  
06  
1/1 Page  
SELECT  
Cancel  
NOTE  
MOVE  
RETURN  
EXIT  
• A yellow outline is displayed around the  
scene to be moved.  
92 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the ENTER button at the end point of the scene.  
Adding a Scene  
8
9
Add Scene  
To setup, follow steps 1 to 4 on page 90.  
DVD-RAM(VR)  
JAN/16/2005 12:15AM  
Scene No. 01  
Start  
End  
Press the …† œ √ buttons to select the scene that  
5
will have a new scene inserted before it, then press  
the ANYKEY button.  
00:00:15  
00:00:35  
Title List : 1/7  
00:00:35  
Cancel  
Start  
End  
MOVE  
Add  
SELECT  
RETURN  
EXIT  
Edit Playlist  
Playlist No. 1  
DVD-RAM(VR)  
The image and time of the end point are displayed in  
the End window.  
To cancel, press the œ √ buttons to select Cancel,  
then press the ENTER button.  
03  
07  
00:00:04  
00:00:00  
04  
0:00:03  
Play  
Modify  
Move  
Add  
7  
Delete  
/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Press the œ √ buttons to select Add, then press the  
ENTER button.  
Press the …† buttons to select Add, then press the  
ENTER or button.  
The Add Scene screen is displayed.  
6
Edit Playlist  
Playlist No. 1  
DVD-RAM(VR)  
01  
05  
00:00:15  
00:00:03  
02  
00:00:26  
00:00:26  
03  
07  
00:00:07  
00:00:07  
04  
08  
00:00:04  
Add Scene  
DVD-RAM(VR)  
JAN/16/2005 12:15AM  
Scene No. 01  
06  
00:00:00  
Return  
1/1 Page  
SELECT  
Start  
End  
MOVE  
RETURN  
EXIT  
00:00:00  
00:00:00  
Title List : 1/7  
00:00:00  
Cancel  
The section you want to add is inserted prior to the  
scene selected in step 4 of Adding a Scene on the  
previous page.  
Start  
End  
MOVE  
Add  
SELECT  
RETURN  
EXIT  
Press the ENTER button at the starting point of the  
7
scene.  
Add Scene  
DVD-RAM(VR)  
JAN/16/2005 12:15AM  
Scene No. 01  
Start  
End  
00:00:15  
00:00:00  
Title List : 1/7  
00:00:15  
Cancel  
Start  
End  
MOVE  
Add  
SELECT  
RETURN  
EXIT  
The image and starting point time are displayed  
on the Start window.  
Select the starting or ending point of the  
section you want to modify using the playback  
related buttons (PLAY( ) SKIP (  
)).  
,
English - 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting a Scene  
Deleting a Playlist Entry from the  
Playlist  
To setup, follow steps 1 to 4 in page 90.  
Using the PLAY LIST button  
Press the …† œ √ buttons to select the scene you  
5
want to delete, then press the ANYKEY button.  
Press the RECORDER button on the front panel or R  
button on the remote control.  
Edit Playlist  
1
2
Playlist No. 1  
0:00:03  
DVD-RAM(VR)  
006  
007  
03  
07  
00:06:04  
00:00:00  
04  
Play  
With the unit in Stop mode, press the PLAY LIST  
button.  
The Edit Playlist screen is displayed.  
Modify  
Move  
Add  
Delete  
/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Playlist  
No.  
Title  
Length  
DVD-RAM(VR)  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:20  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Press the …† buttons to select Delete, then press  
6
the ENTER or button.  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
SP  
1/1 Page  
Edit Playlist  
MOVE  
SELECT  
RETURN  
EXIT  
Playlist No. 1  
DVD-RAM(VR)  
Do you want to delete the scene ?  
0
0
Using the MENU button.  
Yes  
No  
• With the unit in Stop mode, press the MENU  
button.  
1/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Press the …† buttons to select Title, then  
press the ENTER or button.  
The message “Do you want to delete the scene ?” is  
displayed.  
The Title List screen is displayed.  
• Press the ANYKEY button.  
• Press the …† buttons to select Playlist, then press  
the ENTER or button.  
Press the œ √ buttons to select Yes,  
then press the ENTER to delete the selected scene.  
• Press the …† buttons to select Go To Playlist,  
7
then press the ENTER or button.  
Edit Playlist  
DVD-RAM(VR)  
Playlist No. 1  
Press the …† buttons to select the title you want to  
delete from the Playlist, then press the ANYKEY  
button.  
The Edit Playlist menu is displayed:Rename, Delete,  
Edit Playlist, Go To Titlelist, Disc Manager.  
3
01  
05  
00:00:26  
0:00:26  
02  
0:00:07  
03  
00:06:04  
04  
0:00:03  
06  
00:00:00  
1/1 Page  
SELECT  
Return  
MOVE  
RETURN  
EXIT  
Playlist  
No.  
Title  
Length  
DVD-RAM(VR)  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Rename  
Delete  
Edit Playlist  
Go To Titlelist  
DiscManager  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
94 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select Delete, then press  
4
5
the ENTER or button.  
Title Copy  
You will be prompted with the delete confirmation  
message “Do you want to delete?”.  
Playlist  
DVD-RAM(VR)  
About the Copy Screen  
Do you want to delete?  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
Yes  
No  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
7
Scenes  
DVD-RAM(VR)  
MOVE  
SELECT  
RETURN  
EXIT  
No.  
1
Title  
JAN/01/2005 20:25A  
Add  
Rec.Mode  
Length  
SP HS  
00:01:40  
Start  
!
@
%
^
&
a
list  
Rec. Mode  
[
[
R
] Available  
00:59:43  
XP  
3.80 GB  
#
$
P
]
Total  
00:00:16  
*
0.01 GB  
Press the œ √ buttons to select Yes, then press the  
ENTER button.  
You automatically returned to the Playlist screen after  
the delete operation has finished.  
MOVE  
SELECT  
RETURN  
EXIT  
!
@
Title to be copied  
Add titles to be copied (up to 7 titles can be copied  
at one time)  
#
Recording mode for copying  
Playlist  
- HS(high speed): you can copy more quickely than  
normal playback speed.  
DVD-RAM(VR)  
Copies in the same record mode as source title.  
- XP/SP/LP/EP : you can not use high speed copy.  
Record time of title to be copied  
Copy start button  
Record mode setup button  
Deleting...  
(Please wait)  
JAN/18/2005 12:15 AM CH11  
$
%
^
&
JAN/18/2005 12:15 AM  
7
Scenes  
Remaining time and space on the current disc in  
DVD Record mode  
*
Total record time and space of selected titles for  
copying  
Playlist  
Lengtha  
DVD-RAM(VR)  
No.  
Title  
01  
02  
03  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:40:03  
JAN/25/2005 12:15A 00:50:16  
JAN/19/2005 12:15 AM CH11  
JAN/19/2005 12:15 AM  
Contents(Title) Copy Specifications  
7
Scenes  
1/1 Page  
DVD-RW  
(VR mode)  
DVD-RW  
(V mode)  
MOVE  
SELECT  
RETURN  
EXIT  
Contents(Title)  
DVD-R  
Yes  
DVD-RAM  
Yes  
Yes  
Yes  
Recorded Video Title  
Copy Protected  
Title  
No  
No  
No  
No  
Copy Once Title  
No  
No  
No  
No  
Yes = Contents(Title) copying is possible.  
No = Contents(Title) copying is not possible.  
Protection  
This TWIN TRAY DVD RECORDER can allow you to  
protect the contents of your discs, as described below.  
• Title Protection : See page 83 “Locking(Protecting) a  
Title”  
• Disc Protection : See page 104 “Disc Protection”  
• Title copy will function only if protection is cleared.  
English - 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recorder Tray  
Player Tray  
High speed Copy  
Normal Copy  
With the unit in Stop mode/Playback mode, press the  
TITLE LIST button.  
The Title List screen is displayed.  
Media  
Copy contents  
RAM  
RW(VR)  
RAM RW(VR) RW(V)  
R(V)  
4
Unedited Title  
Edited Title  
Playlist  
Yes  
No  
No  
Yes  
No  
No  
Yes Yes Yes Yes  
Yes Yes Yes Yes  
Yes Yes Yes Yes  
DVD-RAM  
DVD-RW(VR)  
Title List  
DVD-RW(V)  
DVD-R(V)  
Title copy  
No  
No  
Yes Yes Yes Yes  
No.  
Title  
Length  
DVD-RAM(VR)  
01  
02  
03  
04  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:20:15  
JAN/20/2005 12:15A 00:20:15  
JAN/25/2005 12:15A 00:50:16  
Yes = Contents(Title) copying is possible.  
No = Contents(Title) copying is not possible.  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
High speed copy works only with the same Mode  
SP  
1/1 Page  
(VR  
VR).  
MOVE  
SELECT  
RETURN  
EXIT  
• Only Single-Layered Discs can be copied.  
• When using High speed Copy, recording available time  
may differ depending on the amount of recorded data.  
High speed copy is done at the default speed of x2(DVD-  
RAM), x4(DVD-RW) or x8(DVD-R).  
Using the MENU button.  
• With the unit in Stop mode/Playback mode,  
press the MENU button.  
MP3, JPEG, DivX, VCD, CDDA discs cannot be copied.  
• Copy screen is not displayed during High or Normal  
speed Copy. The current Broadcast is displayed instead.  
• Press the …† buttons to select Title,  
then press the ENTER or button.  
The Title List screen is displayed.  
Press the …† buttons to select the title you want to  
5
copy.  
To move to other pages, press the SKIP(  
buttons.  
)
Using the TITLE LIST button  
SKIP( ) : previous page of title list  
SKIP( ) : next page of title list  
Press the PLAYER button on the front panel or P  
Press ANYKEY button, then press the …† buttons  
1
2
3
button on the remote control.  
6
to select COPY, then press the ENTER or button.  
Press the OPEN/CLOSE button and place a disc that  
contains a title you want to copy.  
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
01  
02  
03  
JAN/18/2005 12:15A 00:10:21  
JAN/19/2005 12:15A 00:40:03  
JAN/20/2005 12:15A 00:20:15  
Press the OPEN/CLOSE button to close the disc  
tray. Wait until LOAD disappears from the front panel  
display and check that the recordable disc is in the R  
Tray.  
Title  
00:50:16  
Disc  
Copy  
Playlist  
Scene Navigation  
Time Navigation  
1/1 Page  
Select Tray  
MOVE  
SELECT  
RETURN  
EXIT  
96 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
-
Copying a Title that has been edited  
once before -  
Press the …† buttons to select Title, then press the  
ENTER or button.  
7
8
The Copy screen is displayed.  
The “Do you want to view screen of copying title?”  
9
message is displayed.  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
No.  
1
Title  
JAN/18/2005 12:15A  
Add  
Rec.Mode  
Length  
LP HS  
00:10:21  
Start  
a
list  
Rec. Mode  
Do you want to view screen of copying title?  
[
[
R
] Available  
00:59:43  
XP  
3.80 GB  
Total  
00:00:16  
P
]
Yes  
No  
0.01 GB  
04: 08:47  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
If you want to change the record mode when copying,  
see page 98.  
To copy a title while viewing the title on the copy  
screen, press the œ √ buttons to select Yes, then  
press the ENTER button.  
10  
Press the ENTER or button to select Start,  
then press the ENTER button.  
Copy  
DVD-RAM(VR)  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
No.  
Title  
JAN/18/2005 12:15A  
Add  
Rec.Mode  
Length  
1
LP HS  
00:10:21  
Start  
a
list  
1%  
DVD  
DVD  
Rec. Mode  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
If you want to stop copy, press CANCEL key.  
LP  
P
]
00:00:16  
0.01 GB  
If No is selected, the title to be copied is not displayed  
on the screen. Copying begins while the current  
broadcast program is displayed on the screen.  
MOVE  
SELECT  
RETURN  
EXIT  
To cancel the copying in progress, press the  
- About Using DIRECT COPY button -  
CANCEL button.  
Press the …† buttons to select title that you want  
to copy from the title list and then press the  
DIRECT COPY button on the remote control. You  
will then be brought to the copy screen.  
Press the INFO button to disappear the copy  
processing bar.  
• During Playback, you can also copy the title by  
pressing the DIRECT COPY button. After select  
Copy Mode to title, you can go to copy screen.  
-
Copying an Unedited title  
-
-1 The “Do you want to use high speed copy mode?”  
9
message is displayed.  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
Do you want to use high speed copy mode?  
Yes  
No  
04: 08:47  
MOVE  
SELECT  
RETURN  
EXIT  
English - 97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
Changing the Record Mode  
High speed copy : Copying can be performed  
at the maximum speed possible (4x).  
NOTE  
To setup, follow steps 1 to 7 in page 96~97.  
Press the  
and  
buttons to select Rec. Mode, then  
-1 To begin high speed copy, press the œ √ buttons to  
select Yes, then press the ENTER button.  
High speed copy begins. The title being copied is not  
played back. The current broadcast program is  
displayed on the screen.  
8
press the ENTER button.  
10  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
No.  
Title  
JAN/18/2005 12:15A  
Add  
Rec.Mode  
Length  
1
LP HS  
00:10:21  
Start  
a
list  
Rec. Mode  
XP  
[
SP  
LP  
EP  
High Speed  
MOVE  
SELECT  
RETURN  
EXIT  
DVD  
1%  
DVD  
Press the …† buttons to select the record mode you  
If you want to stop copy, press CANCEL key.  
9
want to use, then press the ENTER button.  
HS(High Speed) : Copies in the same record mode  
the original disc was recorded in.  
If No is selected, the title to be copied is displayed at  
• XP/SP/LP/EP : You cannot copy a disc at a higher  
quality than it was originally recorded in. If the  
same record mode is selected, the title is copied  
at high speed.  
its playback speed while copying.  
To cancel the copying in progress, press the  
CANCEL button.  
Press the INFO button to disappear the copy  
processing bar.  
ꢀꢀ  
This unit can not open the P tray and the R  
-1 After a successful copy, “The title is successfully  
tray simultaneously.  
NOTE  
11  
copied” message is displayed.  
ꢀꢀ  
Using the same method, you can copy a  
Playlist.  
ꢀꢀ  
High speed copying is not available for a title  
list that has been deleted partially.  
ꢀꢀ  
During copying, timer recording is not  
available.  
The title is successfully copied.  
ꢀꢀ  
High speed copying is not available when:  
-
Copying a title that can only be copied once  
- Copying a playlist  
- Copying a partially-deleted title  
ꢀꢀ  
Regarding title lists that can be copied only  
once:  
-
Only available for DVD discs that support  
CPRM.  
-
If a playlist contains a scene that can only be  
copied once, it cannot be copied.  
ꢀꢀ  
The High Speed copying can be carried out  
at the maximun speed possible.  
98 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P
ress the ANYKEY button.  
Copying Multiple Titles  
at One Time  
6
7
Title List  
Length  
DVD-RW(VR)  
No.  
Title  
001 JAN/18/2005 12:15A 00:10:21  
002 JAN/19/2005 12:15A 00:40:03  
003 JAN/20/2005 12:15A 00:20:15  
004 JAN/25/2005 12:15A 00:50:16  
Copy  
Playlist  
Scene Navigation  
Time Navigation  
Select Tray  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
Using the TITLE LIST button  
Press the …† buttons to select Copy, then press the  
ENTER or button and select Title.  
The Copy screen is displayed.  
Press the PLAYER button on the front panel or P  
1
button on the remote control.  
Press the OPEN/CLOSE button and place a disc that  
contains a title you want to copy.  
Copy  
2
3
DVD-RAM(VR) Copy To : DVD-RAM(VR) DVD-RAM(VR)  
No.  
1
Title  
JAN/18/2005 12:15A  
Add  
Rec.Mode  
Length  
LP HS  
00:10:21  
Start  
Press the OPEN/CLOSE button to close the disc  
tray. Wait until LOAD disappears from the front panel  
display and check that the recordable disc is in the R  
Tray.  
a
list  
Rec. Mode  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
LP  
P
]
00:00:16  
0.01 GB  
MOVE  
SELECT  
RETURN  
EXIT  
With the unit in Stop mode/Playback mode, press the  
TITLE LIST button.  
4
Press the ANYKEY button.  
The Title List screen is displayed.  
8
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
Title List  
DVD-RAM(VR)  
DVD-RAM(VR)  
No.  
Title  
Length  
001 JAN/18/2005 12:15A 00:10:21  
002 JAN/19/2005 12:15A 00:40:03  
003 JAN/20/2005 12:15A 00:20:15  
004 JAN/25/2005 12:15A 00:50:16  
No.  
Title  
JAN/18/2005 12:15A  
Add  
Rec.Mode  
Length  
1
LP HS  
00:10:21  
Start  
a
list  
Rec. Mode  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
Add  
LP  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
Delete  
P
]
Preview  
Rec. Mode  
00:00:16  
SP  
1/1 Page  
0.01 GB  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Using the MENU button.  
• With the unit in Stop mode/Playback mode,  
press the MENU button.  
• Press the …† buttons to select Title,  
then press the ENTER or button.  
The Title List screen is displayed.  
Press the …† buttons to select one of the title you  
5
want to copy.  
To move to other pages, press the SKIP (  
buttons.  
)
SKIP( ) : previous page of title list  
SKIP( ) : next page of title list  
English - 99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting an Undesired Title from the  
Copy List  
Press the …† buttons to select Add, then press the  
ENTER button.  
9
To setup, follow steps 1 to 7 in page 99 and then continue  
The Add Copy List screen is displayed.  
Press the …† buttons to select the title you want to  
copy, then press the ENTER button.  
with step 8 below.  
Other method: Press the …† buttons to select Add a  
list, then press the ENTER button.  
Press the …† buttons to select a title you want to  
8
9
delete from the copy screen.  
Press the …† buttons to select the title you want to  
copy, then press the ENTER button.  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
Add Copy List  
DVD-RAM(VR)  
No.  
Title  
Length  
No.  
Title  
Rec.Mode  
Length  
001 JAN/18/2005 12:15A 00:10:21  
002 JAN/19/2005 12:15A 00:40:03  
003 JAN/20/2005 12:15A 00:20:15  
004 JAN/25/2005 12:15A 00:50:16  
1
2
3
JAN/18/2005 12:15A  
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
Add  
LP HS  
LP HS  
LP HS  
00:10:21  
00:15:21  
00:30:21  
Start  
Rec. Mode  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
a
list  
LP  
JAN/18/2005 12:15 AM CH11  
JAN/18/2005 12:15 AM  
P
]
00:00:16  
0.01 GB  
SP  
1/1 Page  
MOVE  
SELECT  
RETURN  
EXIT  
MOVE  
SELECT  
RETURN  
EXIT  
Repeat steps 8~9 to copy additional titles.  
Press the ANYKEY button.  
10  
11  
Press the …† buttons to select Delete, then press the  
ENTER or button.  
Copy  
DVD-RAM(VR)  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
The message “Do you want to delete?” is displayed.  
No.  
Title  
Rec.Mode  
Length  
1
2
3
JAN/18/2005 12:15A  
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
Add  
LP HS  
LP HS  
LP HS  
00:10:21  
00:15:21  
00:30:21  
Start  
Rec. Mode  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
a
list  
LP  
Copy  
DVD-RAM(VR)  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
P
]
00:00:16  
0.01 GB  
MOVE  
SELECT  
RETURN  
EXIT  
Do you want to delete?  
Yes  
No  
1.88 GB  
Press the ENTER or buttons to select Start,  
MOVE  
SELECT  
RETURN  
EXIT  
then press the ENTER button.  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
Press the œ √ buttons to select Yes, then press the  
ENTER button.  
No.  
Title  
Rec.Mode  
Length  
1
2
3
JAN/18/2005 12:15A  
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
Add  
LP HS  
LP HS  
LP HS  
00:10:21  
00:15:21  
00:30:21  
Start  
10  
Rec. Mode  
The selected title is deleted.  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
a
list  
LP  
P
]
00:00:16  
0.01 GB  
Copy  
MOVE  
SELECT  
RETURN  
EXIT  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
No.  
Title  
Rec.Mode  
Length  
1
3
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
LP HS  
00:15:21  
00:30:21  
Start  
LP HS  
Rec. Mode  
The added title lists are copied.  
Add  
a
list  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
LP  
To cancel the copying in progress, press the CANCEL  
P
]
00:00:16  
button.  
0.01 GB  
MOVE  
SELECT  
RETURN  
EXIT  
ꢀꢀ  
If copy list contains at least one title that  
cannot be copied at high speed, it performs  
step 9 described on page 97.  
NOTE  
Otherwise, it performs the step 9-1 described  
on page 97.  
100 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Previewing a Selected Title from the  
Copy List  
Selecting Record Mode of Each  
Title from the Copy List  
To setup, follow steps 1 to 7 in page 99 and then continue  
You can copy multiple titles while setting different record  
with step 8 below.  
modes for each title.  
To setup, follow steps 1 to 7 in page 99 and then continue  
with step 8 below.  
Press the …† buttons to select a title you want to  
8
9
preview in the copy screen.  
Press the …† buttons to select a title to change its  
8
record mode in the copy screen.  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
No.  
Title  
Rec.Mode  
Length  
1
2
3
JAN/18/2005 12:15A  
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
Add  
LP HS  
SP LS  
SP HS  
00:10:21  
00:15:21  
00:30:21  
Start  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
Rec. Mode  
DVD-RAM(VR)  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
a
list  
LP  
No.  
Title  
Rec.Mode  
Length  
1
2
3
JAN/18/2005 12:15A  
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
Add  
LP HS  
SP LS  
SP HS  
00:10:21  
00:15:21  
00:30:21  
Start  
P
]
00:00:16  
Rec. Mode  
0.01 GB  
[
[
R
] Available  
00:59:43  
3.80 GB  
Total  
a
list  
MOVE  
SELECT  
RETURN  
EXIT  
LP  
P
]
00:00:16  
0.01 GB  
MOVE  
SELECT  
RETURN  
EXIT  
Press the ANYKEY button.  
Press the …† buttons to select Preview, then press the  
ENTER or button.  
Press the ANYKEY button. Press the …† buttons to  
select Rec. Mode, then press the ENTER or √  
button.  
You can preview the selected title through the display  
window located at the center of the screen.  
9
Copy  
Copy  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
DVD-RAM(VR)  
No.  
Title  
Rec.Mode  
Length  
No.  
1
2
3
JAN/18/2005 12:15A  
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
LP HS  
00:10:21  
00:15:21  
00:30:21  
Start  
1
2
3
JAN/
JAN/
JAN/
SP LS  
Rec. Mode  
de  
SP HS  
ilable  
00:59:43  
3.80 GB  
l  
ilable  
00:59:43  
3.80 GB  
al  
Add  
XP  
Delete  
SP  
LP  
EP  
Preview  
Rec. Mode  
00:00:16  
00:00:16  
0.01 GB  
0.01 GB  
MOVE  
SELECT  
RETURN  
EXIT  
SELECT  
RETURN  
EXIT  
Press the …† buttons to select the record mode you  
Press the RETURN button to exit the Preview mode.  
10  
11  
want, then press the ENTER or button.  
10  
Repeat steps 9~11 to select a title to change it’s  
record mode.  
The rest of the copying process can be performed  
as described on pages 96 to 97.  
English - 101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing Record Mode of All Titles  
from the Copy List  
Disc Copy  
You can copy multiple titles while setting the same record  
mode for all titles.  
To setup, follow steps 1 to 7 in page 99 and then continue  
with step 8 below.  
Select the Rec. Mode on the right-hand side on the  
Disc Copy Specifications  
8
screen using the …†œ √ buttons, then press the  
Recorder tray  
ENTER button.  
DVD-RW  
(VR mode)  
DVD-RW  
(V mode)  
DVD-R  
No  
DVD-RAM  
No  
Player tray  
Copy  
DVD-Dual Layer  
Disc  
No  
No  
No  
DVD-RAM(VR)  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
No.  
Title  
Rec.Mode  
Length  
DVD-Single  
Layer, DVD-  
Video, without  
Copy Protection  
1
2
3
JAN/18/2005 12:15A  
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
Add  
LP HS  
SP LS  
SP HS  
00:10:21  
00:15:21  
00:30:21  
Start  
Rec. Mode  
Yes  
Yes  
No  
XP  
a
list  
SP  
LP  
EP  
High Speed  
Copy Protected  
Disc  
No  
No  
No  
No  
No  
No  
No  
MOVE  
SELECT  
RETURN  
EXIT  
Recorded Video  
Disc- DVD-RAM  
Yes  
Recorded Video  
Disc- DVD-RW  
(V Mode)  
No  
Yes  
No  
Yes  
Yes  
No  
Press the …† buttons to select the record mode you  
want, then press the ENTER button.  
9
Recorded Video  
Disc- DVD-RW  
(VR Mode)  
The rest of the copying process can be performed as  
described on pages 96 to 97.  
No  
No  
No  
No  
Recorded Video  
Disc- DVD-R  
Yes  
Yes  
Copy  
Yes = Disc copying is possible.  
No = Disc copying is not possible.  
DVD-RAM(VR)  
Copy To : DVD-RAM(VR) DVD-RAM(VR)  
No.  
Title  
Rec.Mode  
Length  
1
2
3
JAN/18/2005 12:15A  
JAN/19/2005 13:15A  
JAN/20/2005 15:15A  
Add  
LP HS  
SP HS  
SP HS  
00:10:21  
00:15:21  
00:30:21  
Start  
Rec. Mode  
Protection  
[
[
R
] Available  
a
list  
00:59:43  
XP  
This TWIN TRAY DVD RECORDER can allow you to  
protect the contents of your discs, as described below.  
3.80 GB  
Total  
P
]
00:00:16  
0.01 GB  
MOVE  
SELECT  
RETURN  
EXIT  
• Title Protection : See page 83 “Locking(Protecting) a  
Title”  
• Disc Protection : See page 104 “Disc Protection”  
• Cartridge protection : See page 6.  
Disc copy will operate only if these protection is  
cleared.  
Press the RECORDER button on the front panel or R  
1
2
button on the remote control.  
Press the OPEN/CLOSE button and insert a  
recordable disc in the R tray, then press the PLAYER  
button on the front panel or P button on the remote  
control.  
Press the OPEN/CLOSE button and insert a  
non-copy protected disc that you want to copy into  
the P tray.  
3
102 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
ꢀꢀ  
MP3/JPEG/DivX file copy is not supported.  
Press the OPEN/CLOSE button to close the disc  
tray. Wait until LOAD disappears from the front panel  
display and check that the recordable disc is in the R  
Tray.  
4
5
This unit can not open the P tray and the  
R tray simultaneously.  
NOTE  
Caution  
ꢀꢀ  
ꢀꢀ  
DVD-R discs are write-once media.  
Canceling in the middle of the writing  
process will make the DVD-R unusable.  
For DVD-RAM/RW discs, canceling in the middle  
of the writing process will erase the file which  
had been copied to the DVD-RAM/-RW disc.  
With the unit in Stop mode/Playback mode, press the  
DIRECT COPY button.  
The “Do you want to start the Disc Copy?” message  
is displayed.  
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
Do you want to start the Disc Copy?  
P:DVD-RW(VR) R:DVD-RW(VR)  
Yes  
No  
Disc Manager  
1.88 GB  
MOVE  
SELECT  
RETURN  
EXIT  
To perform Disc Copy, press the œ √ buttons to select  
Yes, then the “All data Recorder Tray’s Disc will be  
deleted. Do you want to continue? message is  
displayed.  
6
7
Disc manager functions are only available when a disc  
is inserted in the R tray.  
Title List  
DVD-RAM(VR)  
No.  
Title  
Length  
Editing the Disc Name  
Follow these instructions to give a name to a disc.  
All data in Recorder Tray’s Disc will be deleted.  
Do you want to continue?  
Yes  
No  
1.88 GB  
MOVE  
SELECT  
RETURN  
EXIT  
With the unit in Stop mode / playback mode, press  
1
2
the ANYKEY button.  
To begin Disc Copy, press the œ √ buttons to select  
Yes, then the Copy screen is displayed.  
Search  
Scene Navigation  
Time Navigation  
Marker  
Rec. Mode  
Select Tray  
Disc Manager  
1%  
DVD  
DVD  
If you want to stop copy, press CANCEL key.  
Press the …† buttons to select Disc Manager, then  
To cancel the copying in progress, press the  
press the ENTER or  
button.  
CANCEL button.  
Press the INFO button to disappear the copy  
Disc Manager  
processing bar.  
DVD-RAM(VR)  
Disc Name  
00  
02  
:
:
04  
:
30  
Used Space  
Available Space  
08 SP  
Disc Protection Info  
Disc Cartridge Info  
Not Protected  
Not Protected  
The Disc is successfully copied.  
Rename  
Protection  
Delete All  
Format  
MOVE  
SELECT  
RETURN  
EXIT  
English - 103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Protection  
Disc Protection allows you to protect your discs from being  
formatted(erased) or deleted due to unintended operations.  
Press the œ √ buttons to select Rename, then press  
the ENTER button.  
The Rename screen is displayed.  
3
Rename  
DVD-RAM(VR)  
With the unit in Stop mode / playback mode,  
1
2
press the ANYKEY button.  
Back Space  
MOVE  
Space Delete  
SELECT  
Clear Save  
RETURN EXIT  
Search  
Scene Navigation  
Time Navigation  
Marker  
Select the desired characters using the …† œ √  
buttons, then press the ENTER button.  
Rec. Mode  
Select Tray  
Disc Manager  
4
5
Rename  
DVD-RAM(VR)  
Disc  
Press the …† buttons to select Disc Manager, then  
press the ENTER or  
button.  
Back Space  
MOVE  
Space Delete  
SELECT  
Clear Save  
RETURN EXIT  
Disc Manager  
DVD-RAM(VR)  
Disc Name  
00  
02  
:
:
04  
:
30  
Used Space  
Available Space  
08 SP  
Press the …† œ √ buttons to select Save,  
then press the ENTER button.  
A disc name is given to the disc.  
Disc Protection Info  
Disc Cartridge Info  
Not Protected  
Not Protected  
Rename  
Protection  
Delete All  
Format  
MOVE  
SELECT  
RETURN  
EXIT  
Disc Manager  
DVD-RAM(VR)  
Disc Name  
Disc  
Press the œ √ buttons to select Protection, then press  
the ENTER button.  
00  
02  
:
:
04  
:
30  
Used Space  
Available Space  
3
08 SP  
Disc Protection Info  
Disc Cartridge Info  
Not Protected  
Not Protected  
Disc Manager  
Rename  
Protection  
Delete All  
Format  
DVD-RAM(VR)  
MOVE  
SELECT  
RETURN  
EXIT  
Disc Protection:
On  
Off  
Rename  
Protection  
Delete All  
Format  
MOVE  
SELECT  
RETURN  
EXIT  
ꢀꢀ  
ꢀꢀ  
ꢀꢀ  
You may need to clear the disc protection  
before beginning editing.  
NOTE  
Depending on the disc type, the displayed  
screen may be different.  
Press the œ √ buttons to select On, then press the  
4
ENTER button.  
You may need to clear cartridge protection  
(DVD-RAM) or unlock the protect before  
beginning editing.  
ꢀꢀ  
Disc Protection will operate only if  
cartridge protect is cleared.  
NOTE  
104 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-RW  
You will be prompted with the confirmation  
Formatting a Disc  
Use these instructions to format (erase) a disc. The  
cartridge write protect tab should be set to the  
unprotect position. The disc protect should also be  
cleared.  
message “Choose the recording format for  
DVD- RW.”  
Disc Manager  
DVD-RAM(VR)  
Choose the recording format for DVD-RW.  
DVD-VR  
DVD-V  
R
Protection  
Delete All  
MOVE  
Finalize  
Format  
RETURN EXIT  
With the unit in Stop mode / playback mode, press  
SELECT  
1
2
the ANYKEY button.  
Search  
Press the œ √ buttons to select Yes, then press the  
ENTER button. The disc is formatted.  
Scene Navigation  
Time Navigation  
Marker  
4
Rec. Mode  
Select Tray  
Disc Manager  
DVD-VR  
DVD-RAM  
DVD-RW  
DVD-V  
DVD-RW  
DVD-R  
DISC  
Press the …† buttons to select Disc Manager, then  
DVD-VR and DVD-V are defined according to their  
recording format.  
press the ENTER or  
button.  
Disc Manager  
DVD-RAM(VR)  
Disc Name  
00  
02  
:
:
04  
:
30  
Used Space  
Available Space  
ꢀꢀ  
Discs created in DVD-VR mode can only  
08 SP  
be played in DVD recorders.  
Discs created in DVD-V mode can be  
played on all standard DVD players.  
NOTE  
Disc Protection Info  
Disc Cartridge Info  
Not Protected  
Not Protected  
Rename  
Protection  
Delete All  
Format  
MOVE  
SELECT  
RETURN  
EXIT  
Delete All Title Lists  
Press the œ √ buttons to select Format, then press the  
3
ENTER button.  
Disc Manager  
DVD-RAM(VR)  
With the unit in Stop mode / playback mode, press  
the ANYKEY button.  
Do you want to format this disc?  
1
Yes  
No  
MOVE  
SELECT  
RETURN EXIT  
Search  
Scene Navigation  
Time Navigation  
Marker  
DVD-RAM  
You will be prompted with the confirmation  
message “Do you want to format this disc?”.  
If you select Yes, you will be prompted with the  
confirmation message “All data will be deleted.  
Do you want to continue?”.  
Rec. Mode  
Select Tray  
Disc Manager  
English - 105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the …† buttons to select Disc Manager, then  
Finalizing a Disc  
2
3
press the ENTER or  
button.  
After you record titles onto a DVD-RW/DVD-R disc with  
your TWIN TRAY DVD RECORDER, the disc needs to  
be finalized before it can be played back on external  
devices.  
Disc Manager  
DVD-RAM(VR)  
Disc Name  
00  
01  
:
:
11  
:
56  
Used Space  
Available Space  
06 SP  
Disc Protection Info  
Disc Cartridge Info  
Not Protected  
Not Protected  
Rename  
Protection  
Delete All  
Format  
Press the RECORDER button on the front panel or R  
MOVE  
SELECT  
RETURN  
EXIT  
1
button on the remote control.  
With the unit in Stop mode, press the ANYKEY  
button.  
Press the œ √ buttons to select Delete All, then press  
the ENTER button.  
Search  
You will be prompted with the confirmation message  
“Do you want to delete all title lists?”.  
Scene Navigation  
Time Navigation  
Marker  
Rec. Mode  
Select Tray  
Disc Manager  
Disc Manager  
DVD-RAM(VR)  
Do you want todeleteall title lists?  
Yes  
No  
Press the …† buttons to select Disc Manager, then  
2
3
press the ENTER or  
button.  
Rename  
Protection  
Delete All  
Format  
MOVE  
SELECT  
RETURN  
EXIT  
Disc Manager  
DVD-RW(VR)  
Disc Name  
00  
:
10  
:
32  
Used Space  
When a Protected Entry exists: The Delete All Title  
List function will not operate.  
If you want to delete a protected entry, disable Protect  
for it on the Lock item.  
Available Space  
02:08 SP  
Not Protected  
VR-Mode  
Disc Protection Info  
Current Rec. Mode  
Rename  
Protection  
Delete All  
MOVE  
Finalize  
SELECT  
Format  
EXIT  
Disc Protection: When Disc Protection or Cartridge  
Protection has been set, data cannot be deleted from  
a disc.  
RETURN  
Press the …† œ √ buttons to select Finalize, then  
press the ENTER button.  
You will be prompted with the message “Do you want to  
finalize disc?”.  
Press the œ √ buttons to select Yes, then press the  
ENTER button.  
All title lists are deleted.  
4
Disc Manager  
DVD-RW0VR)  
Do you want to finalize disc?  
Yes  
No  
Protection  
Delete All  
MOVE  
Finalize  
Format  
RETURN EXIT  
SELECT  
106 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you select Yes, you will be prompted again with the  
message “Disc will be finalized. Do you want to  
continue?”.  
Unfinalizing a Disc (V/VR mode)  
Disc Manager  
DVD-RW(VR)  
To add additional titles to a finalized disc, you must first  
unfinalize it.  
Disc will be finalized.  
Do youwantto continue?  
Yes  
No  
Protection  
Delete All  
MOVE  
Finalize  
Format  
RETURN EXIT  
Press the RECORDER button on the front panel or R  
SELECT  
1
button on the remote control.  
With the unit in Stop mode, press the ANYKEY  
button.  
Press the œ √ buttons to select Yes, then press the  
ENTER button.  
The disc is finalized.  
4
Search  
Scene Navigation  
Time Navigation  
Marker  
Select Tray  
Disc Manager  
ꢀꢀ  
Once a disc is finalized, you cannot delete  
entries from the record list.  
NOTE  
ꢀꢀ  
After being finalized, the DVD-R/DVD-  
RW(video mode) operates in the same  
manner as a DVD-Video.  
Press the …† buttons to select Disc Manager, then  
press the ENTER or button.  
2
3
ꢀꢀ  
Depending on the disc type, the displayed  
screen may be different.  
Disc Manager  
ꢀꢀ  
Finalizing time may be different depending  
on the amount of data recorded on the  
disc.  
DVD-RW(VR:F)  
Disc Name  
00  
00  
:
:
00  
:
00  
Used Space  
Available Space  
00 SP  
ꢀꢀ  
Data on the disc will be damaged if the  
TWIN TRAY DVD RECORDER is powered  
off during finalize process.  
DVD-VR  
Current Rec. Mode  
unfinalize  
SELECT RETURN  
Format  
EXIT  
MOVE  
ꢀꢀ  
When the disc contains a music or JPEG  
files, you cannot finalize the disc.  
Press the œ √ buttons to select Unfinalize, then  
press the ENTER button.  
You will be prompted with the message “Do you want  
to unfinalize disc?”.  
Disc Manager  
DVD-RW(VR:F)  
Do you want to unfinalize disc?  
Yes  
No  
unfinalize  
Format  
MOVE  
SELECT  
RETURN EXIT  
English - 107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you select Yes, you will be prompted again with the  
message “Disc will be unfinalized. Do you want to  
continue?”.  
Disc Manager  
DVD-RW(VR:F)  
Disc will be unfinalized.  
Do you want to continue?  
Yes  
No  
unfinalize  
Format  
MOVE  
SELECT  
RETURN EXIT  
Press the œ √ buttons to select Yes, then press the  
ENTER button.  
The disc is unfinalized.  
4
ꢀꢀ  
A DVD-RW can be finalized or unfinalized  
in Video mode.  
NOTE  
Finalize  
Unfinalize  
DVD-RW(V)  
Mark  
DVD-Video(RW)  
Additional recording, protection  
and deletion are possible.  
Operation Same as DVD-Video  
ꢀꢀ  
A DVD-RW can be finalized or unfinalized  
in VR mode.  
Finalize  
Unfinalize  
Mark  
DVD-RW(VR:F)  
DVD-RW(VR)  
Additional recording,  
deletion, editing, and  
Additional recording,  
deletion, editing, and  
protection are possible.  
Operation  
protection are impossible.  
108 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Reference  
If your product malfunctions, go through the  
checkpoints below before contacting a Samsung  
authorized service center.  
Power  
The input is displayed for a while when the  
power is turned on.  
The TWIN TRAY DVD RECORDER  
Checkpoint 1  
requires some time to initialize and the  
input will be displayed for approx. 10  
seconds after it is turned on.  
Recording  
Cannot record TV programs.  
Check whether the power cord is  
Checkpoint 1  
securely plugged into the power outlet.  
Checkpoint 2  
Did you set the TWIN TRAY DVD  
RECORDER channel settings  
correctly?  
Check the free space on your DVD-  
Checkpoint 3  
RAM/DVD-RW/DVD-R discs.  
Checkpoint 4  
Is the DVD-RAM Cartridge protected?  
I pressed the REC button but there is no response.  
Recording is possible for DVD-  
Checkpoint 1  
RAM/DVD-RW/DVD-R discs only. If a  
program is copy protected, it cannot  
be recorded.  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .109  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .113  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114  
English - 109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Cannot play the disc.  
The angle operation does not work while  
playing a DVD disc.  
Check whether the disc is inserted  
correctly with the label facing up.  
Checkpoint 1  
Checkpoint 2  
Checkpoint 3  
Checkpoint 1  
The angle operation is available only  
when the disc contains images  
captured from different angles.  
Check the regional code of the DVD  
disc.  
This TWIN TRAY DVD RECORDER  
cannot play some types of discs. (See  
page 6.)  
The selected audio and/or subtitle language is  
not played.  
icon appears on the screen.  
Checkpoint 1  
Audio and subtitle languages are  
disc-specific. Only the sound and  
subtitle languages contained on  
the DVD disc are available and  
displayed in the disc menu.  
You cannot use this operation or  
function due to one of the following  
reasons:  
(1) Your DVD disc restricts it.  
(2) Your DVD disc does not support  
this feature (for example: angles)  
(3) The feature is not available at the  
moment.  
Checkpoint 1  
(4) You've requested a title, chapter, or  
scan time that is out of range.  
Play mode settings are different from the settings  
configured in the Settings menu.  
The disc does not support all selected  
Checkpoint 1  
functions. In this case, some settings  
configured in the settings menu may  
not work properly.  
Cannot change the aspect ratio.  
The aspect ratio is fixed for some DVD  
Checkpoint 1  
discs. (See page 38.)  
110 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video  
Timer Recording  
The disc revolves, but no image or bad quality  
images are displayed.  
Timer lamp flickers.  
Check there is enough space in the  
disc for recording.  
Checkpoint 1  
Checkpoint 2  
Check whether there is damage to or  
any foreign material on your disc.  
Checkpoint 1  
Check whether the current disc is  
recordable or not.  
Make sure to check before the start  
time of recording.  
Checkpoint 2  
Some low quality discs may not play  
properly.  
If scenes change from dark to bright  
Checkpoint 3  
suddenly, the screen may shake  
vertically temporarily, but this is not a  
fault.  
Timer recording does not work properly.  
Re-check the recording time and the  
end time settings again.  
Checkpoint 1  
Checkpoint 2  
Sound  
Recording will be canceled if the  
power is interrupted due to a power  
failure or another similar reason  
while recording.  
No sound.  
Are you watching a program in slow  
Checkpoint 1  
or skip mode?  
If you are playing a program at a  
speed other than normal speed,  
sound will not be heard.  
Checkpoint 2  
Check the connections and settings.  
Check whether the disc is damaged.  
Clean the disc, if necessary.  
Checkpoint 3  
Check whether the disc is inserted  
Checkpoint 4  
correctly with the label facing up.  
No audio output.  
Check whether you have selected  
Checkpoint 1  
the correct digital output options in  
the Audio Output Options menu.  
(See page 36.)  
English - 111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other problems.  
Remote Control Unit  
The remote control doesn't work.  
Read the table of contents and then  
Checkpoint 1  
find and read the section describing  
your problem, and follow the  
instructions given.  
Point the remote control at the remote  
Checkpoint 1  
control sensor on your TWIN TRAY  
DVD RECORDER. Allow for proper  
distance. Remove obstacles between  
your TWIN TRAY DVD RECORDER  
and the remote control.  
Checkpoint 2  
Checkpoint 3  
Turn your TWIN TRAY DVD  
RECORDER off and on.  
If the problem still persists, contact a  
nearby Samsung service center or  
call 1-800-SAMSUNG to arrange  
service.  
Checkpoint 2  
Checkpoint 3  
Check the batteries.  
Check for the DVD/TV selection  
button.  
Other  
I forgot my password for parental supervision.  
Checkpoint 1  
Press the () buttons on your  
TWIN TRAY DVD RECORDER  
simultaneously when the power is on.  
All settings including the password will  
revert to the factory settings. Do not  
use this unless absolutely necessary.  
(Note that this function is possible only  
when no disc is inserted.)  
Is it possible to change a subtitle and an audio  
signal on a recorded disc?  
A recorded disc is played with only  
Checkpoint 1  
the subtitle and the audio signal  
which were selected during recording.  
112 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power requirements  
Power consumption  
Weight  
120V AC, 60Hz  
40 Watts  
10.47 lb  
General  
Dimensions  
16.9in(W) x 12.52in(D) x 3.11in(H)  
+41°F to +95°F  
Operating temp.  
Other conditions  
Keep level when operating. Less than 75% operating humidity  
1.0 V p-p at 75load, sync negative  
S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75load)  
Max.Audio Input Level : 2Vrms  
IEEE 1394(4p) compatible jack  
Regular TV broadcasting: VHF (2~13), UHF (14~69)  
Cable TV broadcasting: 1~125  
Video (1,2)  
Audio(1,2)  
DV Input  
Input  
Receivable Channels  
Analog output jacks 1, 2  
Audio  
Video  
Optical/Coaxial digital audio output  
Full scale Analog output level : 2Vrms  
Video output jack 1  
Output  
S-Video output 1 (Y:1.0Vp-p, C:0.286Vp-p at 75load)  
Component output 1 (Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 75load)  
MPEG-II  
Picture Compression format  
Audio Compression format  
Dolby Digital 2ch/256kbps  
XP (about 8.5 Mbps), SP (about 4.5 Mbps), LP (about 2 Mbps),  
EP (about 1.6 Mbps or about 1.2 Mbps)  
20 Hz ~ 20 kHz  
Recording Quality  
Recording  
Audio Frequency Response  
Audio Output  
For DVD discs, audio signals recorded at 96kHz sampling frequency are converted into and output at 48kHz.  
Disc Type  
DVD  
48 / 96kHz  
48kHz  
AUDIO CD(CD-DA)  
44.1kHz  
Analog Audio Output  
Digital Audio Output  
44.1kHz  
English - 113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.  
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by  
SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty  
period:  
One (1) Year Parts / Ninety (90) Days Labor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and  
used in the United States, and does not include transportation, installation, removal or reinstallation. Warranty  
repairs must be performed by SAMSUNG’s authorized service center. To receive warranty service, the original  
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s  
authorized service center. Transportation to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if  
found to be defective during the limited warranty period specified above. The product must be returned during  
the warranty period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to  
returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination  
and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.  
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.  
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is  
longer.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,  
noncommercial use of this product and shall not apply to the following, including, but not limited to: damage  
which occurs in shipment; applications and uses for which this product was not intended; failures or problems  
which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect,  
misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or  
surges; damage caused by improper or faulty installation; improper connection with any peripheral; product  
alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with  
altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and  
environmental instructions that are covered and prescribed in the instruction book; use of non-SAMSUNG or  
unauthorized parts, supplies, accessories or equipment which damage this product or result in service  
problems; failures or problems due to incompatibility with other equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRONICS  
SAMSUNG ELECTRONICS AMERICA, INC.  
HEADQUARTERS  
105 Challenger Road, Rldgefield Park, N.J.  
07660-0511  
TEL: 1-800-SAMSUNG  
SERVICE DIVISION  
400 Valley Road, Suite 201, Mount Arlington, NJ 07856  
1-800-SAMSUNG (1-800-726-7864)  
www.samsung.com  
AK68-00627D-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radica Games Games i6006 User Guide
Radio Shack Watch 63 5026 User Guide
RCA Universal Remote RP5036 User Guide
Samsung Digital Camera Digimax 200 User Guide
Sanyo TV Receiver HT27744 User Guide
Sceptre Technologies Computer Monitor X20g NagaIII User Guide
Scotsman Ice Ice Maker HD30 User Guide
Seagate Computer Drive STAX500102 User Guide
Sennheiser Battery Charger L 2015 User Guide
Sennheiser Headphones HDA 200 User Guide