LCD TV
LA26R7
LA32R7
Contact SAMSUNG WORLD-WIDE
LA40R7
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
AUSTRALIA
Customer Care Centre
1300 362 603
Web Site
CHINA
800-810-5858 , 010- 6475 1880
3698 - 4698
HONG KONG
INDIA
3030 8282
1800 1100 11
INDONESIA
JAPAN
0800-112-8888
0120-327-527
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
02-689-3232
TAIWAN
0800-329-999
VIETNAM
SOUTH AFRICA
U.A.E
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
8000-4726
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
BN68-01200C-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center
of the screen caused by the difference of light emission on the screen.
•
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
•
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
ConnECting and PrEParing Your tV
SEtting thE timE
List of Parts.......................................................2
Installing the Stand ...........................................2
Installing the Wall Mount Kit..............................2
Viewing the Control Panel.................................3
Viewing the Connection Panel..........................4
Viewing the Remote Control .............................7
Installing Batteries in the Remote Control.........8
Switching On and Off........................................8
Placing Your Television in Standby Mode .........8
Plug & Play .......................................................9
Setting and Displaying the Current Time ........24
Setting the Sleep Timer...................................24
Switching the Television On and Off
Automatically...................................................25
FunCtion dESCriPtion
Choosing Your Language................................26
Using Game Mode..........................................26
Setting the Blue Screen Mode /
Selecting the Melody ......................................27
Using the Energy Saving Feature...................28
HDMI Black Level ...........................................28
Selecting the Source.......................................29
Editing the Input Source Names .....................29
SEtting thE ChannElS
Storing Channels Automatically ......................10
Storing Channels Manually.............................11
Setting the Channel Lists................................12
Activating the Child Lock.................................12
Sorting the Stored Channels...........................13
Assigning Channels Names............................13
Fine Tuning Channel Reception......................14
Changing the Picture Standard.......................14
uSing thE tElEtExt FEaturE
Teletext Decoder.............................................30
Displaying the Teletext Information.................30
Selecting a Specific Teletext Page..................31
Using Fastext to Select a Teletext Page .........31
SEtting thE PiCturE
SEtting thE PC
Adjusting the Custom Picture..........................15
Changing the Colour Tone ..............................15
Changing the Picture Size ..............................16
Freezing the Current Picture...........................17
Digital NR / DNIe.............................................17
Resetting the Picture Settings to the Factory
Defaults...........................................................18
Viewing the Picture In Picture (PIP)................18
Setting up Your PC Software
(Based on Windows XP).................................32
Display Modes ................................................32
Setting the PC.................................................33
rECommEndationS For uSE
Wall-Mount Adjustment (LA40R7)
(Sold Separately) ............................................34
Using the Anti-Theft Kensington Lock.............35
Troubleshooting:
SEtting thE Sound
Changing the Sound Standard........................20
Adjusting the Sound Settings..........................20
Setting the TruSurround XT (SRS TS XT) ......21
Adjusting the Volume Automatically................21
Selecting the Internal Mute .............................22
Listening to the Sound of the Sub Picture.......22
Resetting the Sound Settings to the Factory
Defaults...........................................................23
Connecting Headphones (LA32R7, LA40R7).23
Selecting the Sound Mode..............................23
Before Contacting Service Personnel.............35
Technical and Environmental Specifications ..36
Symbol
Press
Important
Note
One-Touch
Button
English - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
list of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control
Stand Screw
& Batteries
(AAA x 2)
Power Cord
Cover-Bottom
Stand
Cleaning Cloth
X 4
Owner’s Instructions
Warranty card
Safety Guide
Registration Card
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
installing the Stand
< 3 >
< ꢀ >
1. Place the TV faced down on a soft cloth or cushion on a table.
ꢀ. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 37 inch and above.
installing the Wall mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Control Panel
1
2
3
4
5
6
7
The product colour and shape may vary depending on the model.
1
SourCE
4
Ch
Toggles between all the available input
sources (TV, AV.1, AV.2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2).
In the on-screen menu, use this button as you
use the EntEr button on the remote
control.
Press to change channels.
In the on-screen menu, use the Ch
buttons as you use the
the remote control.
▲
and
▼
buttons on
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
2
3
mEnu
5
6
Speakers
Press to see an on-screen menu of your TV’s
features.
(PoWEr)
Press to turn the TV on and off.
Power indicator
+ Vol -
Blinks and turns off when the power is on and
lights up in stand-by mode.
Press to increase or decrease the volume.
In the on-screen menu, use the + Vol -
buttons as you use the
the remote control.
◄
and
►
buttons on
7
remote Control Sensor
Aim the remote control towards this spot on
the TV.
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connection Panel
laꢀ6r7
1
2
3
4
Power Input
0
9
8
7
la3ꢀr7, laꢁ0r7
1
2
3
4
[Side Panel Jacks]
2
5
0
9
8
7
6
Power Input
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
English - ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Connecting External a/V devices (aV in/aV in 1)
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
2 Connecting audio
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theater.
3
hdmi in 1, hdmi in ꢀ
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- "High Definition Multimedia interface" allows the transmission of high definition digital video
data and multiple channels of digital audio (5.1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
dVi in(hdmi ꢀ)(audio r/l)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table
below. Failure to observe this may result in picture distortion, image breakup or no picture.
- When using an HDMI/DVI cable connection, it is only possible from the HDMI IN 2 terminal.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
“R - AUDIO - L” terminal on DVI for sound output.
Supported modes for HDMI/DVI and Component
480i
X
480p
X
576i
X
576p
O
720p
O
1080i
O
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
X
O
O
O
X
O
X
O
O
O
O
O
4
Connecting an aerial or Cable television network
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
6 Connecting External a/V devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (5) on the side of your set. While the
head phone is connected, the sound from the built-in speakers will be disabled.
7 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to
the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other
end to "Audio Out" of the sound card on your computer.
8 SErViCE
- Service connection for qualified service engineer.
- Auto Wall-Mount (Refer to page 34)
English - ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Connecting Component devices (dVd)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DVD.
- If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to
the DVD and connect the DVD to component connector ("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
0 Kensington lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the remote Control
1 Television Standby button
c Picture freeze
2 Number buttons for direct
e Picture size selection
channel access
f
PIP: Picture-In-Picture
On/Off
SOURCE: Input source
selection
POSITION: PIP position
selection
3 One/Two-digit channel
selection
4 Selects the TV mode
directly
5 Used to display Channel
P
P
: Next channel
: Previous channel
Lists on the screen.
6
Volume increase
Volume decrease
teletext Functions
4 Exit from the teletext
7 Temporary sound switch-off
display
8
Menu display and
change confirmation
8 Teletext index
% Teletext mode selection
9 Sound mode selection
(LIST/FLOF)
0 Returns to the previous
^ Teletext sub page
menu.
P
P
: Teletext next page
: Teletext previous page
(
! Picture effect selection
@ Adjusts screen brightness
Teletext cancel
)
to save energy.
b Teletext reveal
#
Sound effect selection
d
Alternately select Teletext,
Double, or Mix.
$ SRS TS XT selection
% Available source selection
^ Previous channel
9!ce
Fastext topic selection
Teletext Hold
& Selects the HDMI mode
f
f
f
PIP:
SOURCE:
POSITION:
directly.
Teletext Store
Teletext size
selection
Automatic Power-off
*
(
P
P
: Next channel
: Previous channel
) Exit the OSD
Control the cursor in the
menu
a
b Use to see information on
the current broadcast
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired,
and has Braille points on the Power, Channel and Volume buttons.
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
installing Batteries in the remote Control
1. Lift the cover at the back of the remote control upward as shown in the
figure.
ꢀ. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time. The remote control can
be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
ꢀ. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
ꢁ. Is there a power outage, or is the power cord unplugged?
ꢂ. Is there a special fluorescent light or neon sign nearby?
Switching on and off
the mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
ꢀ. Press the button on the front of the set.
You also can press the PoWEr
button or the tV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
Ch
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
ꢁ. To switch your set off, press the PoWEr button again.
Placing Your television in Standby mode
Your set can be placed in standby mode in order to reduce the power consumption. the standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the PoWEr button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
ꢀ. To switch your set back on, simply press the PoWEr , numeric buttons (0~9), tV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example). It is best to unplug the set from the mains and aerial.
English - ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play
When the tV is initially powered on, several basic settings
proceed automatically and subsequently. the following
settings are available.
Plug & Play
Start Plug & Play.
1. Press the PoWEr button on the remote control.
oK
The message "Start Plug & Play" is displayed with "OK" selected.
Enter
Exit
ꢀ. Select the appropriate language by pressing the ▲ or ▼ button.
Press the EntEr button to confirm your choice.
3. Press the
◄
or
►
buttons to select “Shop” or “Home”, then the EntEr button.
We recommend setting the TV to Home mode for the best picture in your home envronment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the mEnu button for five seconds on the side
panel of the TV.
ꢁ. The message "Check antenna input." is displayed with "OK" selected.
Press the EntEr button.
Please check that the antenna cable is connected correctly.
ꢂ. Select the appropriate Area by pressing the ▲ or ▼ button.
Press the EntEr button to confirm your choice.
6. The "Auto Store" menu is displayed with the "Start" selected. Press the EntEr button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the EntEr button at any time to interrupt the memorization process.
7. Press the EntEr button.
Select the "Month" , "Day" , "Year", "Hour", "Minute" and "am/pm" by pressing the
Set the "Month" , "Day" , "Year", "Hour", "Minute" and "am/pm" by pressing the
◄
or
or
▼
►
button.
button..
▲
You can also set the hour and minute by pressing the number buttons on the remote control.
When you have finished, press the EntEr button
The message “Enjoy your viewing” is displayed.
ꢃ. Press the EntEr button to confirm your setting.
language: Select your language.
area : Select your country.
auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
tV
Setup
if you want to reset this feature...
Plug & Play
language
time
game mode
Blue Screen
melody
1. Press the mEnu button to display the menu.
: English
Press the
▲
or
▼
button to select "Setup", then press the
:
:
:
off
off
off
EntEr button.
PC
smore
ꢀ. Press the EntEr button again, to select "Plug & Play".
3. The message to "Start Plug & Play" is displayed.
(On page 9)
move
Enter
return
Plug & Play
Start Plug & Play.
oK
Enter
return
tV
Channel
- Storing Channels Automatically
- Storing Channels Manually
area
auto Store
manual Store
:
asia/W.Europe
Channel manager
Sort
name
Fine tune
move
Enter
return
Storing Channels automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
automatically allocated programme numbers may not correspond to actual or desired programme
numbers. however, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the EntEr button.
ꢀ. Press the EntEr button to select “Area”.
3. Select the appropriate area by pressing the
▲
or
▼
button.
Press the EntEr button to confirm your choice.
ꢁ. Press the
▲
or
▼
button to select “Auto Store" then press the EntEr button.
ꢂ. Press the EntEr button.
The TV will begin memorizing all of the available channels.
Press the EntEr button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
the programme number of each stored channel which you wish to identify.
1. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the EntEr button.
ꢀ. Press the
▲
or
▼
button to select "Manual Store", then press the EntEr button.
3. Press the EntEr button to select "Programme".
ꢁ. To assign a programme number to a channel, find the correct number by pressing the
▲
or
▼
button and then press the EntEr button.
You can also set a programme number by pressing number buttons on the remote control.
ꢂ. Press the
▲
or
▼
button to select "Colour System", then press the EntEr button.
6. Select the colour standard required by pressing the
▲
or
▼
button then, press the EntEr
button.
7. Press the
▲
or
▼
button to select "Sound System", then press the EntEr button.
ꢃ. Select the sound standard required by pressing the
▲
or
▼
button, then press the EntEr
button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the
Press the EntEr button. Select C (Air channel) or S (Cable channel) by pressing the
button. Press the button to select channel.
Select the required number by pressing the button and then press the EntEr button.
▲
or
▼
button to select "Channel".
▲
or
▼
►
▲
or
▼
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the
▲
or
▼
button to select "Search".
Press the EntEr button. Search by pressing the
▲
or
▼
button and then press the
EntEr button.
11. Press the
▲
or
▼
button to select "Store". Press the EntEr button to select "OK".
1ꢀ. Repeat steps 3 to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Channel lists
Set the channels according to your preference.
Channel list
You can easily delete, add, or lock the channel you want.
P
1
C3
1 / 10
1. Press the mEnu button to display the menu.
Prog.
Press the
▲
or
▼
button to select "Channel", then press the
0
1
ꢀ
3
ꢁ
ꢂ
C--
EntEr button.
C3
ꢀ. Press the or
▲
▼
button to select "Channel Manager",
BBC 1
C7ꢁ
C7ꢂ
C76
then press the EntEr button.
3. Press the EntEr button again, to select "Channel List".
ꢁ. Press the
►
▲
button to select " " line.
6
7
ꢃ
S3
Sꢁ
S6
ꢂ. Press the
or ▼ button to select the undesired channel,
then press the EntEr button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the Exit button to exit.
9
S7
add
lock
move
Enter
return
"
" is active when "Child Lock" is selected to "On".
Page
You can select these options by simply pressing the Ch liSt
button on the remote control.
activating the Child lock
this feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Child lock cannot be released using the buttons on the side.
only the remote control can release the Child lock setting,
so keep the remote control away from children.
tV
Channel manager
Channel list
Child lock
:
off
on
1. Press the mEnu button to display the menu.
Press the
EntEr button.
▲
or
▼
button to select "Channel", then press the
button to select "Channel Manager",
move
Enter
return
Channel list
ꢀ. Press the or
▲
▼
then press the EntEr button.
3. Press the or
the EntEr button.
P
ꢀ
Cꢁ
BBC1
1 / 10
▲
▼
button to select "Child Lock", then press
button to select "On" or "Off". Press the
button to select "Channel List",
Prog.
0
1
ꢀ
3
ꢁ
ꢂ
C--
ꢁ. Press the
▲
or
▼
C3
EntEr button.
BBC 1
C7ꢁ
C7ꢂ
C76
ꢂ. Press the or
▲
▼
then press the EntEr button.
6. Press the
7. Press the
►
▲
button to select " " line.
or button to select the channels you want to
6
7
ꢃ
S3
Sꢁ
S6
▼
lock, then press the EntEr button.
9
S7
ꢃ. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the Exit button to exit.
add
lock
move
Enter
return
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on " " to be active or inactive.
Page
English - 1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
Channel
asia/W.Europe
auto Store
manual Store
Channel manager
Sort
tV
You can exchange the numbers of two channels, in order to:
area
:
modify the numeric order in which the channels have
been automatically stored.
give easily remembered numbers to the channels
that you watch most often.
name
Fine tune
1. Press the mEnu button to display the menu. Press the
▲
or
▼
button to select "Channel", then press the EntEr button.
move
Enter
return
ꢀ. Press the or button to select "Sort", then press the
EntEr button.
3. Select the channel number that you wish to change by press
▲
▼
tV
Sort
Prog.
Ch.
name
r
0
1
ꢀ
3
ꢁ
C--
ing the
button.
▲
or
▼
button repeatedly. Press the EntEr
Cꢀ3
C16
C3
The selected channel number and name are moved to
right side.
S1
r
ꢁ. Press the
▲
or
▼
button to move to the position in which you
move
Enter
return
would like to change and then press the EntEr button.
The selected channel is exchanged with the one
previously stored to the chosen number.
ꢂ. Repeat steps 3 to ꢁ for another channel to be sorted.
6. Press the Exit button to exit.
assigning Channels names
Channel names will be assigned automatically when channel
information is broadcast. these names can be changed,
allowing you to assign new names.
tV
Channel
area
:
asia/W.Europe
auto Store
manual Store
Channel manager
Sort
1. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the
name
Fine tune
EntEr button.
ꢀ. Press the or
EntEr button.
3. If necessary, select the channel to be assigned to a new
▲
▼
button to select "Name", then press the
move
Enter
return
tV
name
name by pressing the
button.
▲
or
▼
button. Press the EntEr
Prog.
Ch.
name
r
0
1
ꢀ
3
ꢁ
C--
-----
-----
-----
-----
-----
The selection bar is displayed around the name box.
Cꢀ3
C16
C3
ꢁ.
to...
then...
S1
r
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Press the ▲ or ▼ button
Press the ► button
Press the ◄ button
Press the EntEr button
move
Enter
return
The characters available are : Letters of the alphabet
(A~Z) / Numbers (0~9) / Special characters (+, –, *, / ,
Blank)
ꢂ. Repeat steps 3 to ꢁ for each channel to be assigned to a new
name.
6. Press the Exit button to exit.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine tuning Channel reception
Channel
asia/W.Europe
auto Store
manual Store
Channel manager
Sort
tV
use fine tuning to manually adjust a particular channel for
area
:
optimal reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
name
Fine tune
ꢀ. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the
button to select "Fine Tune", then press
button to adjust the fine tuning.
EntEr button.
move
Enter
return
3. Press the or
▲
▼
the EntEr button.
Fine tune
ꢁ. Press the
◄
or
►
Press the EntEr button.
P 1
ꢂ. Press the Exit button to exit.
0
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
reset
adjust
Save
return
To reset the fine-tuning, select "Reset" by pressing the
▲
or
▼
button and then press the EntEr button.
Changing the Picture Standard
You can select the type of picture which best corresponds to
tV
Picture
: dynamic
your viewing requirements.
mode
Contrast
Brightness
Sharpness
Colour
tint
Colour tone
Size
100
ꢁꢂ
7ꢂ
ꢂꢂ
rꢂ0
1. Press the mEnu button to display the menu.
Press the EntEr button to select "Picture".
gꢂ0
ꢀ. Press the EntEr button again, to select "Mode".
: Cool1
: 16 : 9
3. Press the
▲
or
▼
button to select the desired picture effect.
smore
Press the EntEr button.
move
Enter
return
ꢁ. Press the Exit button to exit.
tV
Picture
:
mode
dynamic
Standard
movie
dynamic: Selects the picture for high-definition in a bright
Contrast
Brightness
Sharpness
Colour
0
7ꢂ
room.
Standard: Selects the picture for optimum display in a
ꢂꢂ
rꢂ0
normal environment.
tint
gꢂ0
Colour tone
Size
smore
: Cool1
: 16 : 9
movie: Selects the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each input
source.
move
Enter
return
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 18)
You can also press the
P.modE button on the remote
control to select one of the
picture settings.
English - 1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
adjusting the Custom Picture
tV
Picture
: dynamic
Your set has several settings which allow you to control
mode
picture quality.
Contrast
Brightness
Sharpness
Colour
100
ꢁꢂ
7ꢂ
ꢂꢂ
rꢂ0
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
tint
Colour tone
Size
gꢂ0
ꢀ. Press the
▲
or
▼
button to select a particular item. Press the
: Cool1
: 16 : 9
EntEr button.
smore
3. Press the or
◄
►
button to decrease or increase the value of
a particular item. Press the EntEr button.
move
Enter
return
ꢁ. Press the Exit button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
tint: Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast", "Brightness" can be adjusted.
In TV, AV, S-Video modes of the PAL system, you cannot use the Tint function.
Changing the Colour tone
tV
Picture
: dynamic
You can select the most comfortable colour tone to your
eyes.
mode
Contrast
Brightness
Sharpness
Colour
tint
Colour tone
Size
100
ꢁꢂ
7ꢂ
ꢂꢂ
rꢂ0
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(on page 14)
gꢂ0
: Cool1
: 16 : 9
ꢀ. Press the
▲
or
▼
button to select "Colour Tone", then press
smore
the EntEr button.
move
Enter
return
3. Press the
▲
or
▼
button to select the desired colour tone
setting. Press the EntEr button.
tV
Picture
: dynamic
mode
ꢁ. Press the Exit button to exit
Contrast
Brightness
Sharpness
Colour
100
ꢂ
ꢂ
ꢂ
Cool ꢀ
Cool 1
normal
Coolꢀ: Makes the colour temperature bluer than "Cool1"
menu.
tint
gꢂ0
Warm 1 ꢂ0
Warm ꢀ
Colour tone
Size
smore
:
: 16 : 9
Cool1: Makes whites bluish.
normal: Keeps whites white.
Warm1: Makes whites reddish.
Warmꢀ: Makes the colour temperature redder than
"Warm1" menu.
move
Enter
return
The adjusted values are stored according to the selected Picture mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
English - 1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Size
TV
Picture
: Dynamic
You can select the picture size which best corresponds to
your viewing requirements.
Mode
Contrast
Brightness
Sharpness
Colour
100
45
75
55
R50
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
Tint
G50
Colour Tone
Size
sMore
: Cool1
: 16 : 9
2. Press the
▲
or
▼
button to select "Size", then press the
ENTER button.
3. Select the required option by pressing the
▲
or
▼
button.
Move
Enter
Return
Press the ENTER button.
TV
Size
4. Press the EXIT button to exit.
16 : 9
Wide Zoom
Zoom
4 : 3
Just Scan
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
Move
Enter
Return
4:3: This is the default setting for a video movie or normal broadcasting.
Just Scan (HDMI only): Displays the input scenes as they are without
any cutoff when 720p,1080i signals are input.
"Wide Zoom" function is available only in "TV", "AV1", "AV2",
and "S-Video" mode.
You can select these options
by simply pressing the P.SIZE
button on the remote control.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Zoom: Select
Use the
down.After selecting
by pressing the
or button to move the picture up and
, use the or button to
◄
or
►
buttons.
▲
▼
▲
▼
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the▲ or ▼
buttons after selecting the
by pressing
the ► or ENTER button.
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing the Current Picture
Press the Still button to freeze a moving picture into a
still one. Press again to cancel.
digital nr / dnie
if the broadcast signal received by your tV is weak, you can
activate the digital noise reduction feature to help reduce
any static and ghosting that may appear on the screen.
tV
Picture
rmore
digital nr
dnle
: auto
: on
: oK
reset
1. Press the mEnu button to display the menu.
Press the EntEr button, to select "Picture".
ꢀ. Select the required option by pressing the ▲ or ▼ button,
then press the EntEr button.
Available options: Digital NR, DNIe.
move
Enter
return
3. When you are satisfied with your setting, press the
EntEr button.
ꢁ. Press the Exit button to exit.
digital nr: off/low/medium/high/auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
This function is not available in PC mode.
dnie : off/demo/on
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
you can view the difference in the visual quality.
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your
eyes.
This function is not available in PC mode.
This function is not available in Movie mode
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
resetting the Picture Settings to the Factory defaults
You can return to the factory defaults picture settings.
tV
Picture
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
(on page 14.)
rmore
digital nr
dnle
: auto
: on
reset
: oK
oK
Cancel
ꢀ. Press the
▲
or
▼
button to select "Reset", then press the
EntEr button.
3. Press the ▲ or ▼ button to select “OK”, “Cancel”, then press
the EntEr button.
move
Enter
return
ꢁ. Press the Exit button to exit.
The "Reset" will be set for each picture mode.
Viewing the Picture in Picture (PiP)
You can display a sub picture within the main picture of set
programme or video input. in this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
tV
Setup
rmore
Energy Saving
hdmi Black level
PiP
:
:
off
low
1. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Setup", then press the
EntEr button.
ꢀ. Press the or
EntEr button.
3. Press the EntEr button again.
▲
▼
button to select "PIP", then press the
move
Enter
return
tV
PiP
PiP
: on
: tV
:
Press the
button.
▲
or
▼
button to select "On", then press EntEr
Source
Size
Position
Programme
:
ꢁ. Press the
▲
or
▼
button to select "Source", then press
: P 1
EntEr button. Select a source of the sub picture by
pressing the
button.
▲
or
▼
button and press the EntEr
The sub picture can serve different source selections
based on what the main picture is set to.
move
Enter
return
ꢂ. Press the
▲
or
▼
button to select "Size" of the sub picture
and then press the EntEr button. Select a size of the sub
picture by pressing the
▲
or
▼
button and then press the
EntEr button.
If main picture is in "Component" and "PC" mode,
"Size" is not available.
Press the PiP button on the
remote control repeatedly to
activate or deactivate the "PIP".
English - 1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press the
▲
or
▼
button to select "Position", then press the EntEr button.
Select the position of the sub picture by pressing the
button.
▲
or
▼
button and then press the EntEr
7. Press the
▲
or
▼
button to select "Programme" and then press the EntEr button.
You can select the channel that you want to view through sub picture by pressing the
button. Press the EntEr button.
▲
or
▼
The "Programme" can be active when the sub picture is set to TV.
ꢃ. Press the Exit button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
Source: Used to select a source of the sub picture.
Size: Used to select a size of the sub picture.
Position: Used to move the sub picture.
Programme: Used to Change the sub picture.
PiP Settings
o: PIP operates, x: PIP doesn’t operate
Sub
tV
aV1
aVꢀ
S-Video
Component1,ꢀ
PC
hdmi1,ꢀ
main
Component
O
O
O
X
X
X
X
hdmi
O
O
O
O
O
O
X
X
X
X
X
X
X
X
PC
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Sound Standard
You can select the type of the special sound effect to be used
when watching a given broadcast.
tV
Sound
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
1. Press the mEnu button to display the menu.
: off
: off
: off
: main
Press the
▲
or
▼
button to select "Sound", then press the
EntEr button.
ꢀ. Press the EntEr button again, to select "Mode".
3. Select the required sound effect by pressing the
▲
or
▼
move
Enter
return
button repeatedly and then press the EntEr button.
tV
Sound
ꢁ. Press the Exit button to exit.
mode
: Custom
Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
music
movie
Speech
Custom
Standard: Selects the normal sound mode.
music: Emphasizes music over voices.
movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
:
:
: off
: main
move
Enter
return
You can also select these options
by simply pressing the S.modE
button on the remote control.
tV
adjusting the Sound Settings
tV
the sound settings can be adjusted to suit your personal
Sound
preferences.
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr button.
: off
: off
: off
: main
ꢀ. Press the ▲ or ▼ button to select "Equalizer", then press the
EntEr button.
move
Enter
return
3. Press the ◄ or ► button to select a particular item.
tV
Press the EntEr button.
Equalizer
ꢁ. Press the ▲ or ▼ button to reach the required setting.
Press the EntEr button.
ꢂ. Press the Exit button to exit.
If you make any changes to these settings, the Sound Mode
is automatically switched to "Custom".
Balance 100hz 300hz 1khz 3khz 10khz
move
adjust
return
English - ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the truSurround xt (SrS tS xt)
truSurround xt is a patented SrS technology that solves
the problem of playing ꢂ.1 multichannel content over two
speakers. truSurround delivers a compelling,virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. it is fully compatible
with all multichannel formats.
tV
Sound
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
: off
: main
1. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Sound", then press the
move
Enter
return
EntEr button.
tV
Sound
ꢀ. Press the ▲ or ▼ button to select "SRS TS XT", then press
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
the EntEr button.
: off
on
: off
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
: off
: main
EntEr button.
ꢁ. Press the Exit button to exit.
move
Enter
return
TruSurround XT, SRS and
symbol are
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS
Labs, Inc.
You can also set these options
simply by pressing the SrS
button on remote control.
adjusting the Volume automatically
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. this feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
tV
Sound
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
: off
: main
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr button.
move
Enter
return
tV
Sound
ꢀ. Press the ▲ or ▼ button to select "Auto Volume", then press
mode
: Standard
the EntEr button.
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
:
: main
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
on
EntEr button.
ꢁ. Press the Exit button to exit.
move
Enter
return
English - ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the internal mute
if you want to hear the sound through separate speakers,
tV
Sound
cancel the internal amplifier.
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr button.
: off
: off
: off
: main
ꢀ. Press the ▲ or ▼ button to select "Internal Mute", then press
the EntEr button.
move
Enter
return
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
tV
Sound
EntEr button.
mode
: Standard
ꢁ. Press the Exit button to exit.
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
:
:
When "Internal Mute" is set to "On", the Sound menus except
for "Sound Select" (in PIP mode) cannot be adjusted.
off
on
move
Enter
return
listening to the Sound of the Sub Picture
during the PiP features activation, you can listen to the
tV
Sound
mode
: Custom
sound of the sub picture.
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
: off
: main
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr button.
ꢀ. Press the ▲ or ▼ button to select "Sound Select", then press
the EntEr button.
move
Enter
return
3. Press the ▲ or ▼ button to select "Main".
tV
Sound
Press the EntEr button.
mode
: Custom
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
ꢁ. Press the Exit button to exit.
: off
: off
: off
main : Used to listen to the sound of the main picture.
Sub : Used to listen to the sound of the sub picture.
:
main
Sub
You can select this option when the “PIP” is set to “On”.
move
Enter
return
English - ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated.
TV
Sound
Selecting the Reset function after setting the equalizer resets
the equalizer setting to the factory defaults.
Mode
: Custom
Equalizer
SRS TS XT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
: Off
: Off
: Main
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Reset", then press the
Move
Enter
Return
ENTER button.
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
Connecting Headphones (LA32R7, LA40R7)
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" in Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Selecting the Sound Mode
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the
screen.
Audio Type
Mono
DUAL 1/2
MONO
Default
You can also set these
options simply by
pressing the DUAL
button on remote control.
Automatic
change
A2
Stereo
Stereo
Dual
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
DUAL 1
Mono
Automatic
change
NICAM
Stereo
Stereo
Dual
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 1
DUAL 2
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and displaying the Current time
You can set the tV’s clock so that the current time is
displayed when you press the inFo button. You must also
set the time if you wish to use the automatic on/off timers.
Setup
tV
Plug & Play
language
time
game mode
Blue Screen
melody
: English
:
:
:
off
off
off
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr button.
PC
smore
ꢀ. Press the ▲ or ▼ button to select "Time", then press the
move
Enter
return
EntEr button.
tV
Clock Set
3. Press the EntEr button to select "Clock Set".
ꢁ.
month
p
day
Year
ꢀ007
Press the...
to...
01
01
or
or
button.
button.
Move to Month, Day, Year, Hour, Minute or am/pm
Set the Month, Day, Year, Hour Minute or am/pm
Press the EntEr button.
q
hour
1ꢀ
minute am/pm
00
am
ꢂ. Press the Exit button to exit.
move
adjust
return
If you disconnect the power cord, you have to set the clock
again.
You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the
remote control.
Setting the Sleep timer
Setup
tV
You can select a time period of between 30 and 1ꢃ0 minutes
after which the television automatically switches to standby
mode.
Plug & Play
language
time
game mode
Blue Screen
melody
: English
:
:
:
off
off
off
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr button.
PC
smore
ꢀ. Press the ▲ or ▼ button to select "Time", then press the
move
Enter
return
EntEr button.
tV
time
3. Press the ▲ or ▼ button to select "Sleep Timer", then press
Clock Set
Sleep timer
timer1
timerꢀ
timer3
:
:
:
:
:
1ꢀ : 00 am
the EntEr button.
off
30
60
ꢁ. Press the ▲ or ▼ button dly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180).
Press the EntEr button.
90
1ꢀ0
1ꢂ0
1ꢃ0
ꢂ. Press the Exit button to exit.
move
Enter
return
The TV automatically switches to standby mode when the
timer reaches 0.
English - ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the television on and off automatically
Setup
tV
1. Press the mEnu button to display the menu.
Plug & Play
language
time
game mode
Blue Screen
melody
PC
Press the ▲ or ▼ buttons to select "Setup", then press the
EntEr button.
Press the ▲ or ▼ buttons to select "Time", then press the
EntEr button.
: English
:
:
:
off
off
off
smore
ꢀ. Press the ▲ or ▼ buttons to select "Timer 1,Timer 2,Timer 3",
then press the EntEr button.
move
Enter
return
3. Press the ▲ or ▼ buttons to adjust “Hour”, then press the
button to move to the next step.
►
tV
timer1
on time
Set other items using the same method as above.
▲
:
00
am
am
inactivate
1ꢀ
▼
Yes/No
Press the ▲or▼ button
Press the ▲or▼ button
off time
:
1ꢀ
00
inactivate
repeat
Repeat
Select a Once, Everyday,
once
Mon
Sat
~
Fri, Mon
~Sat,
Volume
Programme
10
1
~Sun
move
adjust
return
Volume
Adjust a 0~100
Press the ▲or▼ button
Press the ▲or▼ button
Programme
Adjust a Programme
When finished, press the rEturn button to return.
• The current time will appear every time you press the
inFo button.
• You can set the hour, minute directly by
pressing the number buttons on the remote control.
Press the Exit button to exit.
English - ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing Your language
Setup
tV
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
Plug & Play
language
time
game mode
Blue Screen
melody
: English
:
:
:
off
off
off
1. Press the mEnu button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr button.
PC
smore
ꢀ. Press the ▲ or ▼ button to select "Language", then press
move
Enter
return
the EntEr button.
Setup
tV
3. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Plug & Play
language
time
game mode
Blue Screen
melody
: E
English
Press the EntEr button.
:
:
:
Français
You can choose one of 5 languages.
PC
smore
ꢁ. Press the Exit button to exit.
move
Enter
return
using game mode
Setup
When connecting to a game console such as PlayStationtm or
xboxtm, you can enjoy a more realistic gaming experience by
selecting game menu.
tV
Plug & Play
language
time
game mode
Blue Screen
melody
: English
:
:
:
off
off
off
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr button.
PC
smore
ꢀ. Press the ▲ or ▼ button to select "Game Mode", then press
move
Enter
return
the EntEr button.
Setup
: English
tV
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
Plug & Play
language
time
EntEr button.
game mode
Blue Screen
melody
PC
smore
:
:
:
of
off
off
on
ꢁ. Press the Exit button to exit.
To disconnect the game console and connect another
external device, cancel game mode in the setup menu.
If you display the TV menu in Game mode, the screen
shakes slightly.
move
Enter
return
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode changes to Standard and Sound Mode changes to Custom automatically.
The user cannot change these to other modes.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer
resets the equalizer setting to the factory defaults.
English - ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Blue Screen mode / Selecting the melody
Blue Screen:
Setup
tV
if no signal is being received or the signal is very weak, a
blue screen automatically replaces the noisy picture
background. if you wish to continue viewing the poor picture,
you must set the "Blue Screen" mode to "off".
Plug & Play
language
time
game mode
Blue Screen
melody
PC
: English
:
:
:
off
off
off
melody:
smore
You can hear melody sound when the television is powered
on or off.
move
Enter
return
1. Press the mEnu button to display the menu.
Setup
tV
Press the ▲ or ▼ button to select "Setup", then press the
EntEr button.
Plug & Play
language
time
: English
ꢀ. Press the ▲ or ▼ button to select "Blue Screen" or "Melody".
game mode
Blue Screen
melody
PC
:
:
:
off
off
on
Press the EntEr button.
3. When you are satisfied with your setting, press the EntEr
smore
button.
Blue Screen: off/on
melody: off/low/medium/high
move
Enter
return
Setup
tV
ꢁ. Press the Exit button to exit.
Plug & Play
language
time
: English
game mode
Blue Screen
melody
:
:
:
off
off
off
low
PC
medium
high
smore
move
Enter
return
English - ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce
power consumption. When you watching TV at night, set the
"Energy Saving" mode option to "High" so as to reduce the
dazzling of your eyes as well as the power consumption.
Setup
TV
rMore
Energy Saving
HDMI Black level
PIP
: Off
: Low
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Energy Saving", then
Move
Enter
Setup
Return
press the ENTER button.
TV
3. Select the required option (Off, Low, Medium, High, Auto) by
rMore
Energy Saving
HDMI Black level
PIP
:
:
Off
pressing the ▲ or ▼ button. Press the ENTER button.
Low
Medium
High
Auto
4. Press the EXIT button to exit.
Move
Enter
Return
HDMI Black Level
You can directly select the black level on the screen to adjust
the screen depth.
Setup
TV
rMore
Energy Saving
HDMI Black level
PIP
: Off
: Normal
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons toselect “Setup”, then press the
ENTER button.
2. Press the ▲ or ▼ buttons to select "HDMI Black Level", then
press the ENTER button.
Move
Enter
Return
3. Press the ▲ or ▼ buttons to select “Normal” or “Low”, then
TV
Setup
: Off
press the ENTER button.
rMore
4. Press the EXIT button to exit.
Energy Saving
HDMI Black level
PIP
:
Normal
This function is active only when the external input
connects to HDMI(RGB signals).
Lo
w
• Normal: The screen gets brighter.
• Low: The screen gets darker.
Move
Enter
Return
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Source
You can select among external sources connected to your
tV’s input jacks.
input
tV
Source list
Edit name
: tV
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the
EntEr button.
ꢀ. Press the EntEr button again, to select "Source List".
When no external device is connected to your set, only
"TV" are activated in the "Source List".
move
Enter
return
"AV1", "AV2", "S-Video", "Component1", "Component2",
"PC", "HDMI1", "HDMI2" are activated only when they
are connected to your set.
Source list
tV
tV
aV1
: ----
aVꢀ
: ----
S-Video
: ----
3. Select the required device by pressing the ▲ or ▼ button.
Component1
: ----
: ----
: ----
: ----
: ----
Componentꢀ
PC
Press the EntEr button.
hdmi1
hdmiꢀ
move
Enter
return
Press the SourCE button on the remote control to toggel
between all the available source.
TV mode can be selected by pressing the tV button, number
buttons(0~9), and the P
/
button on the remote control.
But it cannot be selected using the SourCE button.
Editing the input Source names
name the device connected to the input jacks to make your
input source selection easier.
input
tV
Source list
: tV
Edit name
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the
EntEr button.
ꢀ. Press the ▲ or ▼ button to select "Edit Name", then press
move
the EntEr button.
Enter
return
3. Press the ▲ or ▼ button to select the device that you wish
mode
: Custom
Edit name
tV
to edit.
Press the EntEr button.
aV1
aVꢀ
:
----
: VCr
dVd
:
S-Video
ꢁ. Press the ▲ or ▼ button to select the required device.
d-VhS
:
Component1
Cable StB
Press the EntEr button.
Componentꢀ
PC
hdmi1
:
hd StB
:
Satellite StB
ꢂ. Press the Exit button to exit.
:
q
hdmiꢀ
: ----
move
Enter
return
English - ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
teletext decoder
most set channels carry "teletext", pages of written
information that provide information such as:
television programme times.
news bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
the teletext pages are organized according to six categories:
Contents
Part
a
B
C
d
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
E
Status information.
F
displaying the teletext information
You can display teletext information at any time, but signal reception
must be good. otherwise:
information may be missing.
Some pages may not be displayed.
to activate the teletext mode and display the contents page:
1. Using the P
(
) or P
(
) button, select the channel providing
the teletext service.
ꢀ. Press the ttx/mix (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed at any time
by pressing the mEnu ( ) button.
3. Press the ttx/mix (
) button again.
The actual broadcast will be displayed with "Teletext", "Double",
and "Mix" in order on the screen.
ꢁ. Press the tV button to exit from the Text display.
If any broken character appears while Text is being viewed, make
sure that the Text language is identical with the language in the
"Setup" menu mode. If both languages are different, select the same language with the Text
language on the "Setup" menu.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page
number directly:
1. Enter the three-digit page number listed in the contents by
pressing the corresponding numeric buttons.
ꢀ. If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the PiP ( ). Press the PiP ( ) button
again to resume.
3. Using the various display options:
Press the...
to display...
ttx/mix (
)
Both teletext information and the normal broadcast
Hidden text (answers to quiz games, for example)
The normal screen
inFo (
)
)
inFo (
PrE-Ch (
)
A secondary page, by entering its 4-digit number
P
P
(
(
)
)
The next page
The previous page
PoSition
Once
Twice
(
)
Double-size letters in the:
Upper half of the screen
Lower half of the screen
Three times
Normal screen
using Fastext to Select a teletext Page
the various topics included in the teletext pages are
colour-coded, and can be selected by pressing the coloured
buttons on the remote control.
1. Display the teletext contents page by pressing the
ttx/mix (
) button.
ꢀ. Press the coloured button corresponding to the topic that you
wish to select (The available topics are listed on the status
information line).
3. Press the Red button to display the previous page.
Press the Green button to display the next page.
ꢁ. Press the tV button to exit from the Text display.
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your PC Software (Based on Windows xP)
the Windows display-settings for a typical computer are shown below. the
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in
almost all cases. (if not, contact your computer manufacturer or Samsung
dealer.)
1. First, click on "Control Panel" on the Windows start menu.
ꢀ. When the control panel window appears, click on "Appearance and Themes"
and a display dialog-box will appear.
3. When the control panel window appears, click on "Display" and a display dialog-box will appear.
ꢁ. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
display modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
the resolutions in the table are recommended. (all resolutions between the supported limits are
supported)
d-Sub input
mode
resolution
horizontal
Vertical
Pixel Clock
Sync Polarity
Frequency (khz) Frequency (hz
)
Frequency (mhz)
(h/V)
iBm
640 × 350
640 x 480
720 x 400
31.469
31.469
31.469
70.086
59.940
70.087
25.175
25.175
28.322
+ / -
- / -
- / +
VESa
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
37.861
37.500
37.879
48.077
46.875
48.364
56.476
60.023
47.712
72.809
75.000
60.317
72.188
75.000
60.000
70.069
75.029
60.015
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.800
- / -
- / -
+ /+
+ /+
+ /+
- / -
- / -
+ /+
+ /+
hdmi/dVi input
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Pixel Clock
Frequency (mhz)
Sync Polarity
mode
resolution
(h/V)
640×350
720×400
640×480
800×600
1024×768
1360×768
31.469
31.469
31.469
37.879
48.364
47.712
70.086
70.087
59.940
60.317
60.000
60.015
25.175
28.322
25.175
40.000
65.000
85.800
+/-
-/+
-/-
+/+
-/-
iBm
VESa
+/+
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
English - 3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the PC
Coarse and Fine tuning of the image (image lock):
the purpose of picture quality adjustment is to remove or
reduce picture noise.
if the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again. after the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
tV
PC
image lock
Position
auto adjustment
image reset
1. Preset: Press the SourCE button to select PC mode.
move
Enter
return
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr button.
tV
image lock
Coarse
ꢂ0
3. Press the ▲ or ▼ button to select "PC", then press the
Fine
0
EntEr button.
ꢁ. Press the EntEr button to select "Image Lock".
ꢂ. Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the EntEr button.
move
6. Press the
◄
or
►
button to adjust the screen quality.
Enter
return
Press the EntEr button.
7. Press the Exit button to exit.
Changing the image Position:
adjust the PC’s screen positioning if it does not fit the
tV screen.
tV
Position
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
ꢀ. Press the ▲ or ▼ button to select "Position", then press the
EntEr button.
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
move
Enter
return
Press the
◄
or
►
button to adjust the Horizontal-Position.
Press the EntEr button.
ꢁ. Press the Exit button to exit.
adjusting the PC Screen automatically (auto adjustment):
auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. the values of fine, coarse and
position are adjusted automatically.
PC
tV
image lock
Position
auto adjustment
image reset
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
ꢀ. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the EntEr button.
move
Enter
return
3. Press the Exit button to exit.
initializing the image Settings (image reset):
You can replace all image settings with the factory default
values.
tV
PC
image lock
Position
auto adjustment
image reset
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
ꢀ. Press the ▲ or ▼ button to select "Image Reset", then press
the EntEr button.
3. Press the Exit button to exit.
move
Enter
return
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall-mount adjustment (laꢁ0r7)(Sold separately)
once the wall mount is installed, the position of your tV can be easily adjustable.
TV Rear Panel
Auto Wall-Mount
Serial Cable (1P to 1P) (Not supplied)
Entering the menu
mode
: Custom
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
EntEr button.
tV
Setup
rmore
Energy Saving :off
hdmi Black level :off
Wall-mount adjustment
ꢀ. Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”,
PiP
then press the EntEr button.
3. Adjust to the desired position using the ▲,▼,◄,► buttons.
ꢁ. Press the Exit button to exit.
move
Enter
return
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
Wall mount adjusment
Position1
When you turn the power off, your TV moves to the initial
installation position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.
Position
1
ꢀ
3
adjust
Center
Exit
inFo
using the remote Control Buttons
Button
operations
Wall-mount angle
adjustment
Tilt Up, Tilt Down, Move right, Move left
Moves to the initial installation position
Reset
Remembering the
position and moving
to the remembered
position
Remembers 3 positions with the Red, Green and
Yellow buttons.
Moves to the remembered position using these 3
color buttons.
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
English - 3ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
using the anti-theft Kensington lock
the Kensington lock is a device used to physically fix the system when using it in a public place.
the locking device has to be purchased separately. the appearance and locking method may dif-
fer from the illustration depending on the manufacturer. Please refer to the manual provided with
the Kensington lock for proper use.
1. Insert the locking device into
the Kensington slot on the
Cable
LCD TV (Figure 1), and turn it
in the locking direction
(Figure 2).
Figure 2
ꢀ. Connect the Kensington lock
Figure 1
cable.
3. Fix the Kensington lock to a
The place of the Kensington Lock may be
different depending on its model.
<optional>
desk or a heavy stationary
object.
troubleshooting: Before Contacting Service Personnel
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the PoWEr
Check the picture contrast and brightness settings.
Check the volume.
button on the front of the set.
Normal picture but no
sound
Check the volume.
Check whether the mutE
Check if "Internal Mute" is off
button has been pressed on the remote control.
No picture or black and
white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture
interference
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
"Check signal cable."
message is displayed.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, "Not Supported
Mode." message is displayed.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated tech-
nology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have
no impact on the performance of the product.
English - 3ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical and Environmental Specifications
model name
laꢀ6r7
26 inch
la3ꢀr7
32 inch
laꢁ0r7
40 inch
Screen Size (diagonal)
PC resolution
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
Sound
Output
5W x 2
10W x 2
10W x 2
dimension (Wxdxh)
Body
With stand
675 X 75 X 476 mm
675 X 216 X 530 mm
800 X 80 X 549 mm
800 X 252 X 603 mm
991 X 87 X 659 mm
992 X 326 X 713 mm
Weight
10 kg
15 kg
With stand
23 kg
Environmental
Considerations
Operating Temperature 10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F)
Operating Humidity
Storage Temperature
Storage Humidity
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing 5 % to 95 %, non-condensing 5 % to 95 %, non-condensing
10 % to 80 %, non-condensing 10 % to 80 %, non-condensing
Stand Swivel (left / right) (la3ꢀr7, laꢁ0r7)
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
|