Samsung Flat Panel Television 460TSn User Guide

SyncMaster 400TSn/460TSn  
LCD Monitor  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Others  
Remote Control  
Batteries (AAA X 2)  
HDD Cover  
(Not available in all loca-  
tions)  
Sold separately  
DVI Cable  
Wall Mount KIT  
TV tuner box  
Semi Stand KIT  
LAN Cable  
Note  
You can purchase and connect a separate network box or TV tuner box. For information on how  
to use these, refer to their respective user manuals.  
You can only connect one external box.  
Your LCD Display  
Front  
MENU button [MENU]  
Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu  
or return to the previous menu.  
Navigate buttons (Up-Down buttons)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Moves from one menu item to another vertically or adjusts selected menu values.  
Adjust buttons (Left-Right buttons) / Volume buttons  
Moves from one menu item to another horizontally or adjusts selected menu val-  
ues. When OSD is not on the screen, push the button to adjust volume.  
ENTER button [ENTER]  
Activates a highlighted menu item.  
SOURCE button [SOURCE]  
Switches from PC mode to Video mode. Changing the source is only allowed for  
external devices that are connected to the LCD Display at the time.  
[PC] [DVI] [AV] [HDMI] [MagicInfo]  
Note  
The TV menu is available when a TV tuner box is installed.  
D.MENU  
Opens the on-screen D.MENU.  
Note  
This is available when a TV tuner box is installed.  
Power button [  
]
Use this button for turning the LCD Display on and off.  
Brightness Sensor  
The product's Brightness Sensor function automatically detects the surrounding  
brightness using a brightness sensor and adjusts its brightness accordingly.  
Power indicator  
Shows PowerSaver mode by blinking green  
Note  
See PowerSaver described in the manual for further information regarding power  
saving functions. For energy conservation, turn your LCD Display OFF when it  
is not needed or when leaving it unattended for long periods.  
Remote Control Sensor  
Aim the remote control towards this spot on the LCD Display.  
Rear  
Note  
For detailed information concerning cable connections, refer to Connecting Cables under Setup. The  
LCD Display 's configuration at the back may vary slightly depending on the LCD Display model.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
POWER S/W ON [ ] / OFF [O]  
Switches the LCD Display On/Off.  
POWER IN  
The power cord plugs into the LCD Display and  
the wall plug.  
RS232C OUT/IN (RS232C Serial PORT)  
MDC(Multiple Display Control) Program Port  
DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO  
IN] (PC/DVI/HDMI Audio Connection Terminal  
(Input))  
DVI / PC / HDMI IN [HDMI]  
Connect the HDMI terminal at the back of your  
LCD Display to the HDMI terminal of your dig-  
ital output device using a HDMI cable.  
DVI / PC / HDMI IN [RGB](PC Video Con-  
nection Terminal)  
Using a D-Sub Cable (15 pin D-Sub) - PC mode  
(Analog PC)  
DVI / PC / HDMI IN [DVI] (PC Video Con-  
nection Terminal)  
Using a DVI Cable (DVI-D to DVI-D) - DVI  
mode (Digital PC)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
DC OUT [5V/1.5A]  
Connect this to the POWER connector of a TV  
tuner box or network box.  
AV IN [VIDEO] (VIDEO Connection Termi-  
nal)  
Connect the [ VIDEO ] terminal of your monitor  
to the video output terminal of the external device  
using a VIDEO cable.  
AV AUDIO IN [L-AUDIO-R](LCD Display  
Audio Connection Terminal (Input))  
AV AUDIO OUT [L-AUDIO-R] (LCD Dis-  
play Audio Connection Terminal (Output))  
RGB OUT  
LAN (LAN Connection Terminal)  
USB(USB Connection Terminal)  
Keyboard / Mouse, Mass Storage Device Com-  
patible.  
Note  
The number of LCD Displays that can be con-  
nected to loopout may differ depending on the  
cables, signal source etc. With cables where there  
is no degradation or signal source, up to ten LCD  
Displays can be connected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Kensington Lock  
The Kensington Lock is a device used to physi-  
cally fix the system when using it in a public  
place. The locking device has to be purchased  
separately. The appearance and locking method  
may differ from the illustration depending on the  
manufacturer. Refer to the manual provided with  
the Kensington Lock for proper use. The locking  
device has to be purchased separately.  
Note  
The location of the Kensington Lock may be dif-  
ferent depending on its model.  
Using the Anti-Theft Kensington Lock  
1. Insert the locking device into the Kensington  
slot on the Monitor  
locking direction  
and turn it in the  
.
2. Connect the Kensington Lock cable.  
3. Fix the Kensington Lock to a desk or a heavy  
stationary object.  
Note  
See Connecting Cables for further information regarding cable connections.  
Remote Control  
Note  
The performance of the remote control may be affected by a TV or other electronic device operating  
near the LCD Display , causing a malfunction due to interference with the frequency.  
Note  
The TV menu is available when a TV tuner box is installed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
DEL  
button  
Turns the product On.  
1.  
2.  
POWER  
Off  
Turns the product Off.  
3. Number Buttons  
Press to change the channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
The "-" button operates only for DTV. It is used to select MMS  
(multi-channel) for a DTV.  
4. DEL  
button  
5. + VOL -  
Adjusts the audio volume.  
Pauses (mutes) the audio output temporarily. This is displayed on  
the lower left corner of the screen. The audio resumes if MUTE  
or - VOL + is pressed in the Mute mode.  
6. MUTE  
7. TV/DTV  
8. MENU  
Selects the TV and DTV mode directly.  
Opens the on-screen menu and exits from the menu or closes the  
adjustment menu.  
Activates a highlighted menu item.  
9.  
Current picture information is displayed on the upper left corner  
of the screen.  
10.  
INFO  
11.COLOR BUTTONS  
Press to add or delete channels and to store channels to the favorite  
channel list in the “Channel List” menu.  
TV channels provide written information services via teletext.  
- Teletext Buttons  
12.  
TTX/MIX  
13.STILL  
14.AUTO  
Press the button once to freeze the screen. Press it again to un-  
freeze.  
Adjuststhe screen display automatically inPC mode. By changing  
the resolution in the control panel, auto function is performed.  
15. S.MODE  
When pressing this button, the current mode is displayed at the  
bottom centre of the screen. The LCD Display has a built-in high  
fidelity stereo amplifier. Then press the button again to circle  
through available preconfigured modes. ( Standard Music  
Movie Speech Custom )  
16.MDC  
MDC Quick Launch Button.  
17.LOCK  
Activates or deactivates all function keys on both the remote con-  
trol and the LCD Display except for the Power and LOCK buttons.  
Press the button to change the input signal SOURCE.  
18. SOURCE  
Changing the SOURCE is only allowed for external devices that  
are connected to the monitor at the time.  
This button is used to return to the immediately previous channel.  
19.  
ENTER/PRE-CH  
20. CH/P  
21.D.MENU  
22.GUIDE  
In TV mode, selects TV channels.  
DTV menu display  
Electronic Program Guide (EPG) display.  
Returns to the previous menu.  
23.  
RETURN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
24. Up-Down Left-Right but-  
tons  
Moves from one menu item to another horizontally, vertically or  
adjusts selected menu values.  
Exits from the menu screen.  
25.  
26.  
EXIT  
SRS  
Selects SRS TruSurround XT mode.  
MagicInfo Quick Launch Button.  
27.MagicInfo  
28. P.MODE  
When you press this button, current picture mode is displayed on  
the lower center of the screen.  
AV / HDMI / TV : P.MODE  
The LCD Display has four automatic picture settings that are pre-  
set at the factory. Then push button again to circle through avail-  
able preconfigured modes. ( Dynamic Standard Movie  
Custom )  
PC / DVI / MagicInfo: M/B (MagicBright)  
MagicBright is a feature providing the optimum viewing envi-  
ronment depending on the contents of the image you are watching.  
Then push button again to circle through available preconfigured  
modes. (Entertain Internet Text Custom )  
DUAL-  
29. DUAL/MTS  
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM  
MONO/NICAM STEREO can be operated depending on the  
broadcasting type by using the DUAL button on the remote control  
while watching TV.  
MTS-  
You can select MTS (Multichannel Television Stereo) mode.  
Audio Type  
Mono  
MTS/S_Mode  
Mono  
Default  
FM Stereo  
Manual Change  
Stereo  
Mono Stereo  
Mono SAP  
SAP  
Mono  
30. PIP  
Every time you press the button, a PIP screen appears.  
- This fuction does not work for this LCD Display.  
31.SWAP  
Swaps the contents of the PIP and main image. The image in the  
PIP window will appear on the main screen, and the main screen  
image will appear in the PIP window.  
- This fuction does not work for this LCD Display.  
Mechanical Layout (400TSn)  
Mechanical Layout  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Installation VESA Bracket  
When installing VESA, make sure to comply with the international VESA standards.  
Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG  
Distributor to place an order. After your order is placed, installation professionals will visit you  
and install the bracket.  
At least 2 persons are needed in order to move the LCD Display.  
SAMSUNG is not responsible for any product damage or any injury caused by installation at  
customer's discretion.  
Dimensions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Notice  
For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.  
Wall Bracket Installation  
Contact a technician for installing the wall bracket.  
SAMSUNG Electronics is not responsible for any damages to the product or harm to customers  
when the installation is done by the customer.  
This product is for installing on cement walls. The product may not stay in place when installed  
on plaster or wood.  
Components  
Only use the components and accessories shipped with the product.  
Wall Bracket(1)  
Hinge(Left 1, Right Plastic  
Screw  
Screw(B) Anchor  
1)  
Hanger (A)(11) (4)  
(4)  
(11)  
Wall Bracket Assembly  
Note  
There are two hinges(left and right). Use the correct one.  
1. Insert and tighten the Captive Screw in the direction of the arrow.  
When done, mount the wall bracket on the wall.  
There are two hinges(left and right). Use the correct one.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
A -  
B -  
C -  
D -  
Captive Screw  
Wall Bracket  
Hinge (Left)  
Hinge (Right)  
2. Before drilling into the wall, check if the length between the two locking holes at the back of the  
product is correct.  
If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust  
the length.  
A -  
Length between the two locking holes  
3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill  
holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets  
and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A.  
To mount the product on the wall bracket  
The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and  
the screw are the same)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
1. Remove the 4 screws on the back of the product.  
2. Insert the screw B into the plastic hanger.  
Notice  
Mount the product on the wall bracket and make sure it is properly fixed to the left and right  
plastic hangers.  
Be careful when installing the product on the bracket as fingers can be caught in the holes.  
Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place  
after installation.  
3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product.  
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1).  
Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten  
the safety pin (3) to securely hold the product to the bracket.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
A -  
B -  
C -  
LCD Display  
Wall Bracket  
Wall  
Wall Bracket Angle Adjustment  
Adjust the bracket angle to -2° before installing it on the wall.  
1. Fix the product to the wall bracket.  
2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the  
angle.  
3. You can adjust the bracket angle between -2° and 15°.  
Make sure to use the top center, and not the left or the right side of the product to adjust the angle.  
Mechanical Layout (460TSn)  
Mechanical Layout  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Installation VESA Bracket  
When installing VESA, make sure to comply with the international VESA standards.  
Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG  
Distributor to place an order. After your order is placed, installation professionals will visit you  
and install the bracket.  
At least 2 persons are needed in order to move the LCD Display.  
SAMSUNG is not responsible for any product damage or any injury caused by installation at  
customer's discretion.  
Dimensions  
Notice  
For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Wall Bracket Installation  
Contact a technician for installing the wall bracket.  
SAMSUNG Electronics is not responsible for any damages to the product or harm to customers  
when the installation is done by the customer.  
This product is for installing on cement walls. The product may not stay in place when installed  
on plaster or wood.  
Components  
Only use the components and accessories shipped with the product.  
Wall Bracket(1)  
Hinge(Left 1, Right Plastic  
Screw  
Screw(B) Anchor  
1)  
Hanger (A)(11) (4)  
(4)  
(11)  
Wall Bracket Assembly  
Note  
There are two hinges(left and right). Use the correct one.  
1. Insert and tighten the Captive Screw in the direction of the arrow.  
When done, mount the wall bracket on the wall.  
There are two hinges(left and right). Use the correct one.  
A -  
B -  
C -  
D -  
Captive Screw  
Wall Bracket  
Hinge (Left)  
Hinge (Right)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
2. Before drilling into the wall, check if the length between the two locking holes at the back of the  
product is correct.  
If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust  
the length.  
A -  
Length between the two locking holes  
3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill  
holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets  
and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A.  
To mount the product on the wall bracket  
The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and  
the screw are the same)  
1. Remove the 4 screws on the back of the product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
2. Insert the screw B into the plastic hanger.  
Notice  
Mount the product on the wall bracket and make sure it is properly fixed to the left and right  
plastic hangers.  
Be careful when installing the product on the bracket as fingers can be caught in the holes.  
Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place  
after installation.  
3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product.  
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1).  
Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten  
the safety pin (3) to securely hold the product to the bracket.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
A -  
B -  
C -  
LCD Display  
Wall Bracket  
Wall  
Wall Bracket Angle Adjustment  
Adjust the bracket angle to -2° before installing it on the wall.  
1. Fix the product to the wall bracket.  
2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the  
angle.  
3. You can adjust the bracket angle between -2° and 15°.  
Make sure to use the top center, and not the left or the right side of the product to adjust the angle.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting a Computer  
Using a Power cord with Earth  
In the event of failure, the earth lead may cause electric shock. Make sure to  
wire the earth lead in correctly, before connecting the AC power. When un-  
wiring the earth lead, make sure to disconnect the AC power in advance.  
Note  
AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected  
to the LCD Display. For detailed information on connecting AV input devices, refer to the contents  
under Adjusting Your LCD Display.  
Connect the power cord for your LCD Display to the power port on the back of  
the LCD Display. Trun on the power switch.  
There are 2 ways to connect the D-sub to your LCD Display. Choose one of the  
following:  
Using the D-sub (Analog) connector on the video card.  
Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display  
and the 15 pin D-sub Port on the computer.  
Using the DVI (Digital) connector on the video card.  
Connect the DVI Cable to the DVI port on the back of your LCD Display and  
the DVI port on the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connect the audio cable for your LCD Display to the audio port on the back of  
your computer.  
Note  
Turn on both your computer and the LCD Display.  
The DVI cable is optional.  
Contact a local SAMSUNG Electronics Service Center to buy optional items.  
Connecting to Other devices  
Using a Power cord with Earth  
In the event of failure, the earth lead may cause electric shock. Make sure to  
wire the earth lead in correctly, before connecting the AC power. When un-  
wiring the earth lead, make sure to disconnect the AC power in advance.  
Note  
AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected  
to the LCD Display. For detailed information on connecting AV input devices, refer to the contents  
under Adjusting Your LCD Display.  
Connecting AV Devices  
1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the  
LCD Display.  
2. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.  
3. Select AV using the SOURCE .  
Note  
The LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRs or  
Camcorders. You may enjoy AV signals as long as the LCD Display is turned on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to a Camcorder  
1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the  
camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder  
and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .  
2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN  
[VIDEO] on the LCD Display .  
3. Select AV for the Camcorder connection using the Source button on the front of the LCD Display  
or on the remote control.  
4. Then, start the Camcorders with a tape inserted.  
Note  
The audio-video cables shown here are usually included with a Camcorder. (If not, check your local  
electronics store.) If your camcorder is stereo, you need to connect a set of two cables.  
Connecting Using a HDMI Cable  
Note  
Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using  
the HDMI cable.  
You cannot connect a PC to the HDMI terminal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting Using a DVI to HDMI Cable  
Note  
Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD  
Display using a DVI to HDMI cable.  
Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio  
output terminals of the digital output device, and connect the opposite jack to the DVI / PC / HDMI  
AUDIO IN terminal of the LCD Display.  
Connecting to an Audio System  
Note  
Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and AUDIO  
OUT [L-AUDIO-R] on LCD Display.  
Connecting a LAN Cable  
Using a Power cord with Earth  
In the event of failure, the earth lead may cause electric shock. Make sure to  
wire the earth lead in correctly, before connecting the AC power. When un-  
wiring the earth lead, make sure to disconnect the AC power in advance.  
Note  
AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected  
to the LCD Display. For detailed information on connecting AV input devices, refer to the contents  
under Adjusting Your LCD Display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Note  
Connect the LAN cable.  
Connecting a USB device  
Using a Power cord with Earth  
In the event of failure, the earth lead may cause electric shock. Make sure to  
wire the earth lead in correctly, before connecting the AC power. When un-  
wiring the earth lead, make sure to disconnect the AC power in advance.  
Note  
AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected  
to the LCD Display. For detailed information on connecting AV input devices, refer to the contents  
under Adjusting Your LCD Display.  
Note  
You can connect USB devices such as a mouse or keyboard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Self-Test Feature Check  
Note  
that you cannot solve by yourself.  
Self-Test Feature Check  
1. Turn off both your computer and the LCD Display.  
2. Unplug the video cable from the back of the computer.  
3. Turn on the LCD Display.  
The figure shown below ("Check Signal Cable") appears on a black background when the LCD  
Display is working normally even though no video signal is detected: While in the Self-Test mode,  
the LED power indicator remains green and the figure moves around on the screen.  
4. Turn off your LCD Display and reconnect the video cable; then turn on both your computer and  
the LCD Display  
If your LCD Display screen remains blank after using the previous procedure, check your video con-  
troller and computer system; your LCD Display is functioning properly.  
Warning Messages  
You can even view the screen at a resolution of 1360(1920) x 768(1080). However, you will receive  
the following message for a minute; You can choose to change the screen resolution or stay in the  
current mode during that time. And if the resolution is more than 85Hz, you will see the black screen  
because the LCD Display does not support over 85Hz.  
Note  
LCD Display.  
Maintenance and Cleaning  
1) Maintaining the LCD Display Case.  
Clean with a soft cloth after disconnecting the power cord.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Do not use benzene, thinner or other flammable substan-  
ces, or a wet cloth.  
We recommend that a SAMSUNG cleansing agent is used  
to prevent damage to the screen.  
2) Maintaining the Flat Panel Display Screen.  
Clean with a soft cloth (cotton flannel) smoothly.  
Never use acetone, benzene or thinner.  
(They may cause flaws or deformation of the screen sur-  
face.)  
The user will be required to pay costs and related expenses  
for repairing damages caused.  
Symptoms and Recommended Actions  
Note  
A LCD Display recreates visual signals received from the computer. Therefore, if there is a problem  
with the computer or the video card, this can cause the LCD Display to become blank, have poor  
coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the  
problem, and then contact a Service Center or your dealer.  
1. Check if the power cord and the video cables are properly connected to the computer.  
2. Check if the computer beeps more than 3 times when booting.  
(If it does, request an a service for the main board of the computer.)  
3. If you installed a new video card or if you assembled the PC, check if you installed the Adaptor  
(video).  
4. Check if the scanning ratio of the video screen is set to between 50 Hz ~ 85 Hz.  
(Do not exceed 60Hz when using the maximum resolution.)  
5. If you have problems in installing the Adaptor (video) driver, boot the computer in Safe Mode,  
remove the Display Adaptor in the "Control Panel System Device Administrator" and then  
reboot the computer to reinstall the Adaptor (video) driver.  
Check List  
Note  
The following table lists possible problems and their solutions. Before calling for assistance, check  
the information in this section to see if you can remedy any problems for yourself. If you do need  
For more network-related information, refer to the MagicInfo Troubleshooting section.  
Problems related to the Installation (PC Mode)  
Note  
Problems related to the LCD Display installation and their solutions are listed.  
Q:  
The LCD Display screen flickers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
A:  
Check if the signal cable between the computer and the LCD Display is securely connected.  
Problems related to the Screen  
Note  
Problems related to the LCD Display screen and their solutions are listed.  
Q:  
A:  
The screen is blank and the power indicator is off.  
Ensure that the power cord is firmly connected and the LCD Display is on.  
Q:  
A:  
"Check Signal Cable" message.  
Ensure that the signal cable is firmly connected to the PC or video sources.  
A:  
Q:  
A:  
A:  
Q:  
A:  
Ensure that the PC or video sources are turned on.  
"Not Optimum Mode" message.  
Check the maximum resolution and the frequency of the video Adaptor.  
Compare these values with the data in the Preset Timing Modes Chart.  
The picture rolls vertically.  
Check if the signal cable is securely connected. Re-connect it, if necessary.  
Q:  
A:  
A:  
A:  
Q:  
A:  
The image is not clear; picture is blurred.  
Run Frequency Coarse and Fine tuning.  
Turn on again after removing all accessories (video extension cable, etc.)  
Set the resolution and frequency to the recommended ranges.  
The picture image is unstable and shakes.  
Check if the resolution and frequency set for the computer video card falls in the range supported  
Q:  
A:  
Ghost images are shown in the picture.  
Check if the resolution and frequency set for the computer video card falls in the range supported  
Q:  
A:  
The image is too light or too dark.  
Adjusts the brightness and contrast.  
(Refer to the Brightness, Contrast)  
The screen color is inconsistent.  
Q:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
A:  
Q:  
A:  
Q:  
A:  
Q:  
A:  
Q:  
A:  
A:  
Q:  
A:  
Adjust color using Custom under OSD Color Adjustment menu.  
The color image is distorted by dark shadows.  
Adjust color using Custom under OSD Color Adjustment menu.  
The color white is poor.  
Adjust color using Custom under OSD Color Adjustment menu.  
The Power Indicator blinks.  
The LCD Display is currently saving the changes made in the settings to the OSD memory.  
The screen is blank and the power indicator light blinks every 0.5 or 1 seconds.  
The LCD Display is using its power management system.  
Press any key on the keyboard.  
The screen is blank and it is blinking.  
If you see the "TEST GOOD" message on the screen when you pressing the MENU button,  
check the cable connection between the LCD Display and the computer to ensure that the con-  
nector is properly connected.  
Problems related to Audio  
Note  
Problems related to audio signals and their solutions are listed below.  
Q: No sound.  
A: Ensure that the audio cable is firmly connected to both the audio-in port on your LCD Display  
and the audio-out port on your sound card.  
Check the volume level.  
A:  
Q:  
A:  
A:  
The sound level is too low.  
Check the volume level.  
If the volume is still too low after turning the control to its maximum, check the volume control  
on the computer sound card or software program.  
Q:  
A:  
The sound is too high or too low.  
Adjusts the Treble and Bass to the appropriate levels.  
Problems related to the Remote Control  
Note  
Problems related to the remote control and their solutions are listed.  
Q:  
A:  
A:  
The remote control buttons do not respond.  
Check the polarities (+/-) of the batteries.  
Check if the batteries are empty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
A:  
A:  
A:  
Check if the power is on.  
Check if the power cord is securely connected.  
Check if a special fluorescent or neon lamp is on in the vicinity.  
Problems related to MagicInfo  
Note  
Making a Bootable USB Flash Disk.  
Q:  
A:  
Making a Bootable USB Flash Disk  
1) You can turn a common 512-MB or bigger USB storage media into a bootable disk using a  
USB bootable disk creation tool. (For example, the HP USB Disk Storage Format Tool)  
A:  
A:  
2) Copies the OS ghost image and executables to your USB disk.  
3) Enter the BIOS menu of your set by pressing the F2 key in the BIOS logo screen. Then, enable  
the USB Boot First option by selecting that option and pressing the Enter key in the Boot menu.  
A:  
A:  
4) Switch your set on while your USB disk is connected and boot up in DOS mode.  
5) Run C:\ghost.exe and choose Local Partition From Image from the menu. Choose the  
ghost image to update your USB disk with and choose the target disk.  
A:  
6) When the ghost image update finishes, the set will be rebooted automatically.  
Q & A  
Q:  
A:  
How can I change the frequency?  
The frequency can be changed by reconfiguring the video card.  
Note  
That video card support can vary, depending on the version of the driver used. (Refer to the  
computer or the video card manual for details.)  
Q:  
A:  
How can I Adjusts the resolution?  
Windows XP:  
Set the resolution in the Control Panel Appearance and Themes Display Settings.  
Windows ME/2000:  
A:  
Set the resolution in the Control Panel Display Settings.  
* Contact the video card manufacturer for details.  
How can I set the Power Saving function?  
Q:  
A:  
Windows XP:  
Set the resolution in the Control Panel Appearance and Themes Display Screen Saver.  
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-  
ual).  
A:  
Windows ME/2000:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Set the resolution at the Control Panel Display Screen Saver.  
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-  
ual).  
Q:  
A:  
How can I clean the outer case/LCD Panel?  
Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a  
cleaning solution or plain water.  
Do not leave any detergent or scratches on the case. Do not let any water enter the LCD Display.  
How can I play the video?  
Q:  
A:  
The video supports the MPEG1 and WMV codecs only. Install the corresponding codec to play  
the video. Note that some of the codecs can be incompatible.  
Note  
Before calling for assistance, check the information in this section to see if you can remedy any prob-  
lems yourself. If you do need assistance, please call the phone number on the Information section or  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Headphones RI500 User Guide
Remington Hair Dryer D 1000IS User Guide
Remington Power Tools Chainsaw EL 3 User Guide
Roland Musical Instrument RD 700SX User Guide
Saeco Coffee Makers Espresso Maker RI9737 User Guide
Samsung Microwave Oven DE68 02258E User Guide
Samsung Range FX510BGS User Guide
Saturn Automobile 2007 Sky User Guide
Seiko Group Stereo Receiver STX1 User Guide
Sennheiser Battery Charger L151 2 User Guide