CA
AH68-00719J
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre ca u tio n s
Pre ca u tio n s
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
To reduce the risk of fire
or shock hazard, do not
expose this DVD player
to rain or moisture.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the
product.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information. If
the Region number of a DVD disc does not correspond to the Region number of this DVD player, the
DVD player cannot play the disc.
• This device is protected by U.S. patent numbers 4,631,603, 4,577,216 and 4,819,098 and other
intellectual property rights. The use of Macrovision’s copy protection technology in the device must be
authorized by Macrovision and is intended for home and other limited pay-per-view uses only, unless
otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited.
CAUTION: DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Ha n d lin g Ca u tio n s
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne correspondante
de la prise et pousser jusqu au fond.
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions,
use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures.
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this
occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Disc Sto ra g e
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
This class B digital apparatus meets all requirements of the Canadian Interference --
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
Causing Equipment Regulations
.
• Keep in a clean protection jacket.
CLASS 1
LASER PRODUCT
Ma in te n a n ce o f Ca b in e t
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
KLASS 1
LASER APPARAT
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Be fo re Yo u Sta rt
TABLE O F CO N TEN TS
Acce sso rie s
..............................................................................................
General Features
6
Disc Type and Characteristics .......................................................................... 7
Description-Front Panel ....................................................................................8
Description-Rear Panel ....................................................................................9
Tour of the Remote Control..............................................................................10
Choosing a Connection ..................................................................................12
Batteries for
Remote Control
Remote Control (AA Size)
Playing a Disc................................................................................................14
Using the Search & Skip Functions ............................................................16
Using the Display Function..............................................................................17
Repeat Play ..................................................................................................18
Program Play & Random Play ........................................................................19
S.FIT Play ......................................................................................................20
Digest Play ....................................................................................................21
Slow Repeat play ..........................................................................................22
Using the Disc View Function ..........................................................................23
Selecting the Audio Language ........................................................................24
Selecting the Subtitle Language ......................................................................25
Changing the Camera Angle ..........................................................................26
Using the Bookmark Function ..........................................................................27
Using the Zoom and 3D Sound Functions........................................................................28
User’s Manual
Video/ Audio Cable
If re m o te d o e sn ’t o p e ra te
p ro p e rly :
In sta ll Ba tte rie s in th e
Re m o te
Open the battery cover on the
back of the remote.
• Check the polarity + - of the batteries
(Dry-Cell)
1
Using the Setup Menu ....................................................................................29
Setting Up the Language Features ..................................................................30
Setting Up the Parental Control ......................................................................32
Setting Up the Audio Options ........................................................................33
Setting Up the Display Options ......................................................................34
• Check if the batteries are drained.
Insert two AA batteries. Make
2
3
sure that the polarities (+ and -)
are aligned correctly.
• Check if remote sensor is blocked by
obstacles.
Controlling a TV with the Remote ....................................................................35
Troubleshooting..............................................................................................36
Specifications ................................................................................................37
Warranty ......................................................................................................38
• Check if there is any fluorescent
lighting nearby.
Replace the battery cover.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge n e ra l Fe a tu re s
Disc Ty p e a n d Ch a ra cte ristics
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Excellent Sound
Various On-Screen Menu Functions
You can select various
languages(Audio/ Subtitle) and screen
angles while enjoying movies.
Dolby Digital, a technology
developed by Dolby Laboratories provides
crystal clear sound reproduction.
Disc Types
(Logos)
Recording
Types
Max.
Playing Time
Disc Size
Characteristics
Screen
Repeat
Single-sided
240 min.
Double-sided
480 min.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily
selected through the on-
screen menu.
DVD
Both regular and widescreen(16:9) pictures
can be viewed.
You can repeat a song or movie simply by
pressing the REPEAT button.
5"
Audio
+
Video
Slow Motion
An important scene can be viewed in slow
motion.
Single-sided
80 min.
Double-sided
160 min.
31/2"
5"
Programmed Play
You can program tracks to play in desired
order.
VIDEO-CD
AUDIO-CD
NOTE
74 min.
20 min.
74 min.
20 min.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
* To ensure proper playback of discs burned from MP3
files, make sure the files have been recorded at a bit rate
of at least 128kbps.
Audio
+
Video
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
31/2"
* If there are any gaps (blank data) on multi-session discs,
you may experience playback problems.
* On discs that are recorded with a Variable Bit Rate(VBR),
e.g. from 32 to 320kbps, the sound may cut in and out.
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
5"
Audio
31/2"
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
Disc Ma rk in g s
CO PY PRO TECTIO N
DIGITAL
SOUND
~
STEREO
NTSC
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player
• Digital
• DTS disc
• Play
Region
Number
• NTSC broadcast • Dolby
• Stereo disc
system in U.S.A,
directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
Audio disc
Digital disc
Canada, Korea,
Japan, etc.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Pla y Re g io n N u m b e r
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc
to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
De scrip tio n -Fro n t Pa n e l
De scrip tio n -Re a r Pa n e l
Fro n t Pa n e l Co n tro ls
STANDBY / ON
PLAY/ PAUSE
1
7
8
9
• When the unit is first plugged in, the indicator lights.
When STANDBY/ ON is pressed on again, the light
goes out and the player is turned on.
• Begin or pause disc play.
STOP
• Stops disc play.
SKIP
HEADPHONES JACK
2
3
4
• You can attach headphones here for private listening.
HEADPHONES VOLUME
• Use to skip a scene or music.
Re a r Pa n e l
10 JOG
• Use to adjust headphones volume level.
DISC TRAY
• Use to access certain Shuttle features with the
Shuttle dial :When JOG is pressed, indicator
lights up.
DIGITAL AUDIO OUT JACKS
1
2
• Load the disc here.
•
Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/ V Amplifier that contains a Dolby Digital or DTS decoder.
DISPLAY
SHUTTLE
5
6
11
• Operation indicators are displayed here.
OPEN/ CLOSE
• Use during DVD and CD play to fast forward or
reverse. In JOG mode(JOG button pressed),
used for frame advance/ CD track selection.
ANALOG AUDIO OUT JACKS
Connect to the Audio input jacks of your television, audio/ video receiver, or VCR.
•
• Press to open and close the disc tray.
VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
3
4
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
5
6
COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be
selected in the VIDEO OUT SELECT.
Fro n t Pa n e l Disp la y
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
9
1
Angle indicator. You can select multiple angles
of a scene recorded by different cameras.
Disc type indicators
Reverse play / Pause / Forward play
Lights when 3D surround is turned on.
DVD : Title number
DVD : Chapter number.
Video/ Audio CD : Track number
Repeat play mode
Linear PCM audio output
Dolby Digital Disc
DTS (Digital Theater System) output
MPEG-2 Audio output
Displays various messages concerning
operations such as PLAY, STOP, LOAD, RANDOM, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc
information.
10
2
3
4
5
6
7
8
11
12
13
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
To u r o f th e Re m o te Co n tro l
To u r o f th e Re m o te Co n tro l
DVD Fu n ctio n Bu tto n s
DVD POWER Button
NUMBER Buttons
STEP Button
17 TV POWER Button
1
2
18 3D Button
1
2
17
18
OPEN/ CLOSE Button
CHANNEL Buttons
DIGEST Button
3
4
19
20
VOLUME Buttons
TV/ VIDEO Button
ZOOM Button
5
6
7
8
21
22
PLAY/ PAUSE Button
• Begin/ Pause disc play.
S.FIT Button
23
SKIP Buttons
SEARCH Buttons
• Allows you to search forward/ backward
through a disc.
3
• Use to skip the title, chapter, or track.
24
25
BOOKMARK Button
4
5
STOP Button
DISPLAY Button
9
19
20
• Displays the current disc mode.
10
RETURN Button
6
7
AUDIO Button
• Use this button to access various audio functions
on a disc.
• Returns to a previous menu.
26
27
28
21
11
12
SETUP Button
• Brings up the DVD player’s Setup menu.
8
9
ENTER/ DIRECTION Button
22
23
24
SUBTITLE Button
(UP/ DOWN or LEFT/ RIGHT buttons)
• This button functions as a toggle switch.
13 ANGLE Button
• Use to access various camera angles on a DVD.
10
11
12
TOP MENU
14 MENU Button
• Brings up the Disc menu.
25
26
• Takes you to the menu on the DVD disc or CD/ VCD.
29 REPEAT Button
• Allows you to repeat play a title, chapter, track,
13
15 CLEAR Button
• Use to remove menus or status displays from the
27
or disc.
screen.
28
29
14
30 MODE Button
SLOW Button
16
• Allows you to program a specific order.
31 A-B REPEAT Button
30
31
15
16
• Use to mark a segment to repeat between A and B.
32
VOL.CON. Button
• To control the master volume of the player.
32
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch o o sin g a Co n n e ctio n
Ch o o sin g a Co n n e ctio n
The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Co n n e ctio n to a TV (Fo r Vid e o )
TV (Normal, Widescreen, Projection, etc..)
Be fo re Co n n e ctin g th e DVD Pla y e r
Method 1
Method 2
Method 3
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
Good picture
Basic Audio
Better picture
Best picture
• Refer to the owner’s manual of the additional components you are connecting for more information
on those particular components.
TV
Co n n e ctio n to a n Au d io Sy ste m
S-Video
Cable
AV Cable
Video Cables
Method 1
Method 2
OR
OR
AUDIO
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jack
DVD
Audio Output Jacks Video Output Jack
S-Video Jack
Component Video
Jacks
OR
• Method 1
• Method 2
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Component Video Jacks
(If Y, Pb or Pr is selected in the VIDEO OUT SELECT.)
• Method 3
DVD
Analog Audio Out
Digital Audio Out
NOTE
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla y in g a Disc
Pla y in g a Disc
Step Motion Play (Except CD).
Be fo re Pla y
7
8
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
• Turn on your TV and press the TV/ VIDEO button to select the video mode.
• Turn on your Audio System and select AUX, CD or DVD.
- Press PLAY/ PAUSE to resume normal play.
(You can only perform step motion play in the forward direction.)
After plugging in the player, the first time you
press the DVD POWER button, this screen comes
up :
If you want to select the language, press a NUMBER button. (This screen will
only appear the very first time you plug in the player.)
Slow Motion Play (Except CD).
Press the FWD SEARCH or REV SEARCH button on the remote during PAUSE or
STEP mode.
- By pressing the FWD SEARCH or REV SEARCH button, you can select slow motion
play for 1/ 8, 1/ 4 or 1/ 2 of normal speed.
Pla y
- No sound is heard during slow mode.
- Press PLAY/ PAUSE to resume normal play.
- When playing a VCD, the reverse slow motion play will not work.
Press the OPEN/ CLOSE button.
1
The STANDBY indicator light goes out and the tray opens.
Place a disc gently into the tray with the disc’s label
2
facing up.
Press the PLAY/ PAUSE button or OPEN/ CLOSE button
to close the disc tray.
3
4
5
6
Stopping Play.
Press the STOP button during play.
Removing Disc.
Press the OPEN/ CLOSE button.
RESUME fu n ctio n
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up
where you left off (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.).
Pausing Play.
Press the PLAY/ PAUSE or STEP button on the remote during play.
- Screen stops, no sound.
NOTE
- To resume again, press PLAY/ PAUSE button once again.
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY button to
resume normal play.
• This
icon indicates an invalid button press.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g th e Se a rch & Sk ip Fu n ctio n s
Usin g th e Disp la y Fu n ctio n
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
W h e n Pla y in g a DVD
During play, press the DISPLAY button
on the remote.
1
Se a rch in g th ro u g h a Ch a p te r o r Tra ck
- Current title, chapter number and elapsed time
will be displayed.
During play, press the FWD or REV SEARCH
button on the remote.
• Use the LEFT/ RIGHT buttons to select a title or a
chapter number.
1
Use the UP/ DOWN button or Number buttons to
enter a different title or chapter number, then
press the ENTER button.
• Press the REVERSE or FORWARD SEARCH button on the
remote and press again to search at a faster
speed(2X/ 4X/ 8X/ 16X/ 32X/ 128X normal speed, in order)
on the DVD.
• To enter the time from which you want to start,
use the LEFT/ RIGHT buttons to select, then use
the Number buttons to enter the time. Then press
the ENTER button.
• Press the REVERSE or FORWARD SEARCH button on the
remote and press again to search at a faster
speed(2X/ 4X/ 8X/ normal speed in order) on VCD and CD.
• To return to normal speed play, press the PLAY/ PAUSE
button.
Press the DISPLAY button on the remote
twice.
2
- Current audio, subtitle and volume control will
appear.
Sk ip p in g Tra ck s
- To make the screen disappear, press the DISPLAY
button again.
During play, press the NEXT SKIP or BACK SKIP
button.
2
W h e n Pla y in g a CD/ VCD
• When playing a DVD, if you press the NEXT SKIP button,
it moves to next chapter. If you press the BACK SKIP button, it
moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
VCD
(Menu off)
During play, press the DISPLAY button
on the remote.
1
VCD
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1
or a CD, if you press the NEXT SKIP button, it moves to next
track. If you press the BACK SKIP button, it moves to the
beginning of the track. One more press makes it move to the
beginning of the previous track.
- Current track number, elapsed time and volume
control will be displayed.
(Menu on)
• Use the LEFT/ RIGHT buttons to select a track.
Use the UP/ DOWN button or Number buttons
to enter a different track number, then press the
ENTER button.
CD
• If a track exceeds 15 minutes when playing a VCD and you
press the NEXT SKIP button, it moves forward 5 minutes. If you
press the BACK SKIP button, it moves backward 5 minutes.
NOTE
• To enter the time from which you want to start,
use the LEFT/ RIGHT buttons to select, then use
the Number buttons to enter the time. Press the
ENTER button.
DVD 2X, 4X, 8X, 16X, 32X, 128X
VCD 4X, 8X
NOTE
• When playing a VCD 2.0 in the MENU MODE or Track View
function, if you press the NEXT SKIP button, it moves to the
next MENU or the next Track View display.
What is a Chapter?
CD
2X, 4X, 8X
Each Title on a DVD is usually divided into
chapters (similar to tracks on an audio CD).
If you press the BACK SKIP button, it moves to the previous
MENU or the previous Track View display. (See page 23.)
• Depending on the disc, audio may
not be heard when a disc is in 2X
play mode.
- To make the screen disappear, press the DISPLAY
button again.
What is a Title?
A DVD may contain several different titles.
For example, if a disc contains four different
movies, each might be considered a title.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Re p e a t Pla y
Pro g ra m Pla y & Ra n d o m Pla y
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
Pro g ra m Pla y (DVD/ VCD/ CD)
Press the MODE button.
1
2
3
W h e n p la y in g a DVD
DVD
Use the LEFT/ RIGHT buttons to select
PROGRAM. Press the ENTER button.
Press the REPEAT button on the remote. Repeat
1
2
screen appears.
Use the LEFT/ RIGHT buttons to select the first
chapter (or track) to add to the program. Press
the ENTER button. The selection numbers appear
in the Program Order box.
Select Chapter, Title or A-B using the
LEFT/ RIGHT buttons.
-
A-B Repeat
• Press the REPEAT button. Select A-B on screen with the
LEFT/ RIGHT buttons or press the A-B button on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
Press the PLAY/ PAUSE button. The disc will be
played in programmed order.
VCD/ CD
4
• Press ENTER at the point where you want the repeat play to
stop (B).
Ra n d o m Pla y (DVD/ VCD/ CD)
Press ENTER.
3
4
Press the MODE button.
1
2
To return to normal play, press REPEAT again,
then press the LEFT/ RIGHT buttons to select Off
and press ENTER.
Use the LEFT/ RIGHT buttons to select RANDOM.
Press the ENTER button.
The disc will be played in random order.
NOTE
NOTE
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• If the title or track is completed before marking the end (B), the end of title or track becomes B automatically.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
• Depending on the disc, the Program and Random Play function may not work.
• When in VCD 2.0 mode (MENU ON mode), these functions do not work.
• To resume normal play, press the CLEAR button.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
S.FIT Pla y
Dig e st Pla y
Scre e n Fit Pla y
Dig e st Pla y
During play, Press the DIGEST button.
Press Screen FIT button on remote control.
1
2
1
-
You'll see the 9 individual windows representing each of the
chapters on the TV screen.
- Allows you to eliminate the black bars in the top and bottom
of the screen when a movie is playing in the Widescreen
format(16:9).
-
When each window is displayed, the first 3 seconds of the
chapter will be played.
- Screen Fit will not work when the Zoom mode is active.
(you can not remove the black bars on the screen)
However, Zoom mode will work when Screen Fit is active.
Press Up/ Down/ LEFT/ RIGHT buttons to select the
window you'd like to see, and press the ENTER
button.
skip button
• Up to 9 windows(chapters) can be displayed on the screen
at a time.
Press the 'Skip' button for the next 9 chapters if the movie
has more than 9.
NOTE
NOTE
• Various aspect ratios are available only in multiple screen format discs.
• This function does not work when a DVD has been recorded in a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due to their aspect ratio.
• You can play the DVD player starting with the desired chapter after directly moving to the scene you want.
• 'DIGEST' may not operate depending on the disc in use.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g th e Disc Vie w Fu n ctio n
Slo w Re p e a t p la y
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
Tra ck Vie w (VCD)
Displays the beginning view of each track and the
track number.
During play, press the TOP MENU button.
1
W h e n p la y in g a DVD
Press the UP/ DOWN buttons to select TRACK
2
3
VIEW. Press the ENTER button.
Press the PLAY/ PAUSE button.
1
Select the desired view by pressing the
UP/ DOWN or LEFT/ RIGHT buttons.
Press the F/ SEARCH button to choose the play speed between 1/ 8X, 1/ 4X, and
2
3
4
1/ 2X of normal.
Press the ENTER button.
4
Press the REPEAT (A-B) button to select the point where the function starts. (A)
example
In d e x Vie w (VCD)
Press the REPEAT (A-B) button to select the point where the function ends. (B)
Displays the equally divided 9 views of the current
playing track.
During play, press the TOP MENU button.
1
Press UP/ DOWN buttons to select INDEX
2
3
4
VIEW. Press the ENTER button.
example
Select the desired view by pressing
UP/ DOWN or LEFT/ RIGHT buttons.
Press the ENTER button.
NOTE
NOTE
• The disc will play only from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT (A-B)' button again.
• In stop mode on VCD, press the TOP MENU button and the TRACK VIEW will be displayed.
•
•
When pressing the TOP MENU button with a DVD; the disc’s TITLE MENU function comes up. A disc must
have at least two titles for the TITLE MENU function to work.
When pressing the TOP MENU button with a CD; the unit enters the INTRO mode. INTRO lets you listen
to the beginning of each track for about 10 seconds.
23
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Se le ctin g th e Au d io La n g u a g e
Se le ctin g th e Su b title La n g u a g e
You can select a desired subtitle quickly and easily with the SUBTITLE button.
You can select a desired language quickly and easily with the AUDIO button.
Usin g th e SUBTITLE b u tto n
Usin g th e AUDIO b u tto n
Press the SUBTITLE button.
Press the AUDIO button.
DVD
VCD
ENG
ENG
1
1
2
Use the UP/ DOWN buttons to select the
desired subtitle language.
Use the UP/ DOWN buttons to select the
desired language on a DVD.
2
3
- The audio languages are represented by
abbreviations.
Use the LEFT/ RIGHT button to determine
whether or not the subtitle will be displayed.
Use the UP/ DOWN buttons to select
Stereo, Right or Left. (On VCD/ CD)
- Initially, the subtitling will not appear on screen.
3
- The subtitle languages are represented by abbreviations.
NOTE
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
•
How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 31.
•
How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 31.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g th e Ca m e ra An g le
Usin g th e Bo o k m a rk Fu n ctio n
When a DVD contains multiple angles of a particular scene, you can select the Angle function.
The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you
can quickly find the section at a later time.
Usin g th e AN GLE b u tto n
Usin g th e Bo o k m a rk Fu n ctio n (DVD/ VCD)
Press the ANGLE button to see if an ANGLE (
mark is present at the upper right hand corner of
the screen.
)
During play, press the BOOKMARK button on
1
the remote. The Bookmark icons will be
displayed.
When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner
of the screen.
Use the LEFT/ RIGHT button to move to the
desired bookmark icon.
1
2
3
example
When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
Use the UP/ DOWN buttons to select the
desired screen angle.
2
3
Press the BOOKMARK button to turn off the
display.
4
To turn off the display, press the ANGLE
button again.
Re ca llin g a Ma rk e d Sce n e
Ma ste r Vo lu m e Co n tro l Fu n ctio n
During play, press the BOOKMARK button on
the remote.
1
2
3
Press the VOL.CON. button. Use the
Use the LEFT/ RIGHT button to select a marked
scene.
64
1
UP/ DOWN buttons to select a suitable
volume.
Press the PLAY/ PAUSE button to skip to the
marked scene.
- Master Volume Control function lets you adjust the
volume of the player’s output. This is useful for matching
the player’s output level to other equipment in your
system.
Cle a rin g a Bo o k m a rk
- Volume control is only operative when using the
Analog Audio outputs.
NOTE
- There are up to 64 levels. Lowering each level
reduces the audio level by 0.5dB.
During play, press the BOOKMARK button
on the remote.
• Up to three scenes may be
marked at a time.
1
2
3
NOTE
• When in VCD 2.0 mode (MENU
ON mode), this function does not
work.
Use the LEFT/ RIGHT button to select the
bookmark number you want to delete.
• The Master Volume must be reset for each disc you play. Once a disc is done playing, the Master Volume
returns to the default position (64).
Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn
off display.
• Depending on the disc, the
Bookmark function may not work.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g th e Zo o m & 3 D So u n d Fu n ctio n s
Usin g th e Se tu p Me n u
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of television
screen you have.
Usin g th e Zo o m Fu n ctio n (DVD/ VCD)
During play or pause mode, press the
ZOOM button on the remote. A square will
be displayed on screen.
1
2
3
With the unit in Stop mode, press the SETUP button
1
on the remote.
Use the UP/ DOWN or LEFT/ RIGHT
button to select the part of the screen you
want to zoom in on.
Player Menu : Setup of the Display Language
Use the Player preference menu to select the
language for the player’s on-screen displays.
Press the ENTER button.
Disc Menu : Setup of the Menu Language
Use the Menu preference menu to select the language you want a
DVD’s disc menu to be displayed in.
- During DVD play, press ENTER to zoom in
2X/ 4X/ 2X/ Normal in order.
Audio : Setup of the Audio Language
- During VCD play, press ENTER to zoom in
2X/ normal in order.
Use the Audio preference menu to select the soundtrack language.
Subtitle : Setup of the Subtitle Language
Use the Subtitle preference menu to select the language the disc’s
subtitles are to be displayed in.
Usin g th e 3 D So u n d Fu n ctio n
Parental : Setup of the Parental Level
Allows users to set the level necessary to prevent children from
viewing unsuitable movies such as those with violence, adult subject
matter, etc.
The simulated surround effect (SPATIALIZER N-2-2)
depends on the disc contents. If you connect the
unit to your stereo system, you can enhance sound
quality and produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT is set to BIT
STREAM in the SETUP MENU, the 3D Sound
function will not work.)
Audio Options : Setup of the Audio Options
Display Options : Setup of the Display Options
Use to select which type of screen you want to watch and several
display options.
Use the UP/ DOWN buttons on the remote to access
the different features.
2
3
NOTE
Press the ENTER button to access the sub features.
During play, press the 3D SOUND button.
• 3D Sound is possible only on discs
recorded using Dolby Surround or
Dolby Digital. However, some of these
discs do not contain rear channel
sound signals.
1
2
The 3D SOUND mark will be displayed on
screen. (Be sure the Digital Output is set to
PCM.)
To make the setup screen disappear after setting up, press the
SETUP button again.
NOTE
Depending on the disc, some
Setup Menu selections may not
work.
• Depending on the disc, the Zoom and
3D Sound function may not work.
Press the UP/ DOWN buttons to turn the 3D
Sound feature on or off.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Se ttin g Up th e La n g u a g e Fe a tu re s
Se ttin g Up th e La n g u a g e Fe a tu re s
If you set the player menu, disc menu, audio and subtitle language in advance, they will come
up automatically every time you watch a movie.
Usin g th e Au d io La n g u a g e
With the unit in Stop mode, press the SETUP
button.
Usin g th e Pla y e r Me n u La n g u a g e
1
2
3
4
Press the UP/ DOWN buttons to move to AUDIO.
With the unit in Stop mode, press the
SETUP button.
e.g
Setting up in English.
1
2
3
4
5
Use the UP/ DOWN buttons to select the
PLAYER MENU.
Press the ENTER button.
Press the ENTER button.
Press the UP/ DOWN buttons to select ‘ENGLISH’ .
- Select “Original” if you want the default soundtrack language
to be the original language the disc is
recorded in.
Use the UP/ DOWN buttons to select
‘English’.
- Select “Others” if the language you want is not listed.
Press the ENTER button.
Press the ENTER button.
- English is selected and the screen returns to SETUP
MENU.
5
- English is selected and the screen returns to SETUP MENU.
- To make the SETUP MENU disappear, press the
RETURN button.
Usin g th e Su b title La n g u a g e
Usin g th e Disc Me n u La n g u a g e
With the unit in Stop mode, press the SETUP
button.
This function changes the text language only
on the disc menu screens.
e.g
Setting up in English.
1
2
3
4
Use the UP/ DOWN buttons to select SUBTITLE.
With the unit in Stop mode, press the
1
2
3
4
SETUP button.
Press the ENTER button.
Use the UP/ DOWN buttons to select
DISC MENU.
Press the ENTER button.
Use the UP/ DOWN buttons to select ‘ENGLISH’.
NOTE
Use the UP/ DOWN button to select
‘English’.
- Select “Automatic” if you want the subtitle language to be
the same as the language selected as the audio preference.
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
- Select “Others” if the language you want is not listed. Some
discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
- Select “Others” if the language you want is not
listed.
•
How to make the SETUP MENU
return to menu screen
Press the ENTER button.
disappear or
during set up; Press RETURN button.
5
Press the ENTER button.
- English is selected and the screen returns to SETUP
MENU.
5
- English is selected and the screen returns to SETUP MENU.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Se ttin g Up th e Pa re n ta l Co n tro l
Se ttin g Up th e Au d io O p tio n s
With the unit in Stop mode, press the SETUP button.
The Parental Control function works in conjunction with DVDs that have been assigned a
rating - which helps you control the types of DVDs that your family watches. There are up
to 8 rating levels on a disc.
1
Use the UP/ DOWN buttons to select AUDIO OPTIONS.
Then press the ENTER button.
2
3
With the unit in Stop mode, press SETUP button.
Use the UP/ DOWN buttons to select the desired item.
Then press the LEFT/ RIGHT button.
1
2
3
The Setup Menu screen appears.
Use UP/ DOWN to select Parental. Press ENTER.
The Parental Control screen appears.
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
Use LEFT/ RIGHT to select Yes if you want to use
a password. Press ENTER. The Enter Password
screen appears.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
Enter your password. The Re-enter Password
screen appears to confirm the password. Enter
your password again. The Parental Control
screen appears.
4
5
NO TE : Be sure to select the correct Digital Output or
no audio will be heard.
About the Rating Level ;
DTS
1. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2. Off : Doesn’t output digital signal.
The Rating Level will work only when Use
Password is set to Yes. To unlock the player,
use LEFT/ RIGHT to select No. Use UP/ DOWN
to select Rating level. Press ENTER.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
- Use UP/ DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use LEFT/ RIGHT to select No in Use
Password.
2X Scan Audio
1. On : Turns 2X audio on.
e.g
Setting up in LEVEL6.
About the Change Password ;
2. Off : Turns 2X audio off.
6
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
- Use UP/ DOWN to select Change Password.
The Change Password screen appears.
- Enter your new password. Re-enter the new
password again.
NOTE
•
Press RETURN button.
How to make the SETUP MENU disappear or return to menu screen during set up;
• Certain audio features of this product manufactured under a license from Desper Products, Inc.
®
Spatializer and circle-in-square device are trademarks owned by Desper Products, Inc.
NOTE
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
•
How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Se ttin g Up th e Disp la y O p tio n s
Co n tro llin g a TV w ith th e Re m o te
The remote can also be set up to control most TVs. To program the remote, use the code
that corresponds to your brand.
With the unit in Stop mode, press the SETUP button.
1
2
3
Use the UP/ DOWN buttons to select DISPLAY
OPTIONS. Then press the ENTER button.
TV Codes
CODE
BRAND
Use the UP/ DOWN buttons to select the desired item.
Then press the LEFT/ RIGHT buttons.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
SAMSUNG_1
SHARP_2
SONY
TV Aspect
MAGNAVOX
SANYO_1
LG_2
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
RCA
LG_1
TOSHIBA
HITACHI
JVC
PANASONIC_1
MITSUBISHI_2
SAMSUNG_2
SAMSUNG_3
SHARP_1
ZENITH
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
LG_3
DAEWOO_8
SANYO_2
EMERSON
SHARP_3
SAMSUNG_4
PANASONIC_2
NOBLEX
Still Mode
These options will help prevent picture shake in still mode and
display small text clearer.
1. Field : Select this feature when the screen shakes in the Auto
mode.
2. Frame : Select this feature when you want to see small letters
more clearly in the Auto mode.
3. Auto : When selecting Auto, Field/ Frame mode will be
automatically converted.
TELEFUNKEN
NEWSAN
LOEWE
RCA2
Screen Messages
Use to turn on-screen messages On or Off.
Turn on the TV
If the TV turns off, setup is complete.
Front Display
1
2
3
4
5
Adjust the brightness of the unit’s front panel display.
1. Bright : Makes the Front Panel Display bright.
2. Dim : Makes the Front Panel Display dim.
3. Auto Dim : Makes the Front Panel Display dim automatically
when playing a DVD.
Point the DVD’s remote at the TV.
Enter other codes of the same brand
if the first code does not work.
While holding the TV POWER button down,
enter the code for your brand.
To operate the TV, use the “TV Function
Buttons” described on page 11.
Black Level
Adjusts the brightness of the screen.(On/ Off)
e.g
NOTE
For Samsung_1 TVs.
NOTE
The remote may not be able to control
every model TV of the brands listed.
While holding down the TV button,
enter 0 then and 1.
•
How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Tro u b le sh o o tin g
Sp e cifica tio n s
Before requesting service (troubleshooting), please check the following.
Power Requirements
Power Consumption
Weight
AC 120 V, 60 Hz
15 W
Action
Problem
Page
6.2 lbs
General
•
•
•
Check the batteries in the remote. May need replacing.
Operate the remote control at a distance of no more than 20 feet.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
Dimensions
W 16.9 in x D 9.4 in x H 3.1 in
+41°F to +95°F
No operations can be
performed with remote.
Operating Temperature Range
Operating Humidity Range
P4
10 % to 75 %
Reading Speed : 11.45 ft/ sec.
Approx. Play Time
DVD
•
•
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
Disc does not play.
(DIGITAL VERSATILE DISC)
P7
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 3.9 to 4.6 ft/ sec.
Maximum Play Time : 74 min.
Reading Speed : 3.9 to 4.6 ft/ sec.
Maximum Play Time : 20 min.
Reading Speed : 3.9 to 4.6 ft/ sec.
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
L(1/ L), R(2/ R)
5.1 channel sound is not
being reproduced.
•
5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
CD : 5"
(COMPACT DISC)
CD : 31/ 2"
Disc
P12
•
(COMPACT DISC)
VCD : 5"
•
•
Check if your audio system is connected and working properly.
In a SETUP Menu, is the Audio Output set to Bitstream?
The
icon appears on
•
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
Composite Video
Component Video
screen.
P15
Video
Output
S-VIDEO
Disc Menu doesn’t appear.
•
•
Check if the disc has a Menu.
P29~30
P29~34
Play mode differs from the
Setup Menu selection.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
2 Channel
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
*Frequency Response
The screen ratio cannot be
changed.
Audio
•
•
The Screen Ratio is fixed on your DVDs.
P34
P33
*S/ N Ratio
*Dynamic Range
Output
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
100 dB
*Total Harmonic Distortion
0.004 %
•
Press power on from a cold start with no disc in the unit. Press the STOP
and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.
Forgot password
*: Nominal specification
P32
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
If you experience other
problems.
•
•
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Wa rra n ty (fo r Ca n a d a u se rs o n ly )
LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship.
SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure
is due to improper workmanship or defective materials, SECA will repair or replace the product at its option.
All warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location
nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)
LABOR
PARTS
One year (Carry- in)
One year
On carry-in models, transportation to and from the service center is the customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It
must be presented to the authorized service center at the time service is requested.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse, incorrect line
voltage, improper installation, improper or unauthorized repairs, commercial use or damage that occurs in shipping.
Exterior and interior finish, lamps, glass are not covered under this warranty. Customer adjustments which are
explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically
be voided for any unit found with a missing or altered serial number. This warranty is valid only on products
purchased and used in Canada.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
|