Component Cable for Nintendo Wii TM
The cable that came with your Wii may have one yellow video connector.
That type of cable connects the video using composite video.
Your new cable has three video connectors (red, green, and blue).
This type cable connects the video using component video.
Component video provides better video quality than composite video.
Plugs into the Wii
The three video connectors
Audio
Video
(red, blue, and green) are bundled together
with a band labeled Video and plug into the
component video jacks on the TV.
The above TV jack panel also has two sets of component video jacks, but the bottom set of jacks
(labeled 1) has a video jack that is both green and yellow.
This jack can be used as the green component video jack or yellow composite video jack. You can
still use these jacks to connect your cable.
The two audio connectors (red and white)
are bundled together with a band labeled
Audio and plug into the audio jacks on the
TV.
COMPONENT/ AV-IN
ANT/CABLE IN ETHERNET
SPDIF
Y/Video
L
R
The jacks on most newer TVs are color-coded to match the colors on your cable.
If the jacks on your TV are not color-coded, they probably have labels.
Examples of TV jack panels
Video jacks:
connects to the red video connector.
Plugs into the Wii
Audio
•
PR
Video
• PB connects to the blue video connector.
• Y connects to the green video connector.
The aboveTV jack panel has one set of component video jacks. The Y/Video jack is the same as the Y
component video jack that the green video connector plugs into.
If you have a device connected to this jack and the L and R audio jacks to the right, you would have to
unplug the device in order to connect your cable to these jacks.
Audio jacks:
• R connects to the red audio connector.
• L connects to the white audio connector.
To connect your cable:
1 Plug the AV Multi Out connector on your cable into the AV Multi Out jack on the back of the
Wii console.
2 Plug the video connectors on your cable into the component video jacks on your TV.
Make sure that you plug the red video connector into the red PR jack and not into the red R
audio jack.
3 Plug the audio connectors on your cable into the L and R audio jacks on
your TV. Make sure that you plug the red audio connector into the red R
audio jack and not into the red PR jack.
Plugs into
the Wii
Audio
Video
TIP
The above TV jack panel has two sets of component video jacks, and each set has its own audio jacks.
Make sure that you plug the cable connectors into the matching set of audio and video jacks. If you
plug the video connectors into one set of jacks (in this example, 1) and the audio connectors into
the other set of jacks (in this example, 2), you may not hear audio.
Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc.
All rights reserved. ROCKETFISH is a trademark of 2010 BBY Solutions, Inc. Registered in some countries. All other products and brand names
are trademarks of their respective owners.
ND-GWII1122
QUICK SETUP GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
11-1094
|