SyncMaster 170T
Dual Interface(Analog/Digital)
Flat Panel Monitor
Owner’s
Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e o f C o n t e n t s
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting up your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up an Ergonomic Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Monitor location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Workstation height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Viewing angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Kensington Security Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Plug and Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Self-Test Feature Check (STFC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjusting Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
User Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Automatic Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Direct-Access Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
OSD Lock/Unlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
On-Screen Menu System (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Accessing the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PowerSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Attaching an Arm-Type Stand or Wall Mount Hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Maintenance of Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See back of Manual
English
1
Download from Www.Somanuals.com. All Manuals Search And Download.
S a f e t y In s t r u c t i o n s
Before connecting the AC power cord to the DC adapter outlet, make sure the voltage
designation of the DC adapter corresponds to the local electrical supply.
Never insert anything metallic into the openings in the cabinet of the liquid cristal display
(LCD) monitor; doing so may create the danger of electric shock.
To avoid electric shock, never touch the inside of the LCD Monitor. Only a qualified
technician should open the case of the LCD Monitor.
Never use your LCD Monitor if the power cord has been damaged. Do not allow anything
to rest on the power cord, and keep the cord away from areas where people can trip over
it.
1
2
3
4
Be sure to hold the plug, not the cord, when disconnecting the LCD Monitor from an
electric socket.
Openings in the LCD Monitor cabinet are provided for ventilation. To prevent overheating,
these openings should not be blocked or covered. Also, avoid using the LCD Monitor on a
bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the
bottom of the cabinet. If you put the LCD Monitor in a bookcase or some other enclosed
space, be sure to provide adequate ventilation.
5
6
Put your LCD Monitor in a location with low humidity and a minimum of dust
7
8
Do not expose the LCD Monitor to rain or use it near water (in kitchens, near swimming
pools, etc.). If the LCD Monitor accidentally gets wet, unplug it and contact an authorized
dealer immediately. You can clean the LCD Monitor with a damp cloth when necessary, but
be sure to unplug the LCD Monitor first.
Place the LCD Monitor on a solid surface and treat it carefully. The screen is made of thin
glass with a plastic front surface and can be damaged if dropped, hit or scratched. Do not
clean the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene, ethyl
acid, methyl, or chloride – these may damage the panel.
9
Locate your LCD Monitor near an easily accessible AC outlet.
10
11
If your LCD Monitor does not operate normally – in particular, if there are any unusual
sounds or smells coming from it – unplug it immediately and contact an authorized dealer
or service center.
High temperature can cause problems. Don’t use your LCD Monitor in direct sunlight, and
keep it away from heaters, stoves, fireplaces, and other sources of heat.
Unplug the LCD Monitor when it is going to be left unused for an extended period of time.
12
13
14
Unplug your LCD Monitor from the AC outlet before any service.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
English
2
Download from Www.Somanuals.com. All Manuals Search And Download.
U n p a c k i n g Y o u r LC D M o n i t o r
Please make sure the following items are included with your monitor. If any items are
missing, contact your dealer.
Power Cord
Colorific
& Driver
AUTO EXIT
MENU
A
B
15-pin D-Sub Signal Cable
Warranty Card
(not available everywhere)
Monitor and Base
DC-Adapter
DVI-D Signal Cable
(Optional)
Manual
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g u p y o u r LC D M o n i t o r
Setting up an Ergonomic Workstation
Consider the advice given below before you install your monitor.
Monitor location
Choose a position that exposes you monitor to the least reflection from lights or windows,
usually at a right angle to any window.
Workstation height
Place your LCD Monitor so that the top of the screen is slightly below your eye level when
you are comfortably seated.
Viewing angle
Tilt the screen backward or forward to a comfortable viewing position.
AUT
O
MENU
Figure 1. Tilt the screen
Kensington Security Slot
This monitor offers you the opportunity to secure your monitor using a Kensington-type
security device. Kensington lock not included. Refer to your locking device documentation for
installation instructions.
Figure 2. Kensington-type security slot location
English
4
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g u p y o u r LC D M o n i t o r
Connecting Your LCD Monitor
This monitor offers a method for connection to both a PC and a workstation. One or both
types of signal cables can be connected to the monitor simultaneously. Determine which
connection method(s) you need and refer to the instructions below.
2
4
3
Figure 3. Cable connections (Analog)
Turn off your system and unplug its power cord.
1
2
3
4
5
6
Attach the blue signal cable connector to the video port on the back of your computer.
Connect the power cord for your monitor to the power port on the power adapter.
Plug the power cords of your computer and your monitor into a nearby outlet.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
Perform the auto adjustment procedure as described in “Auto Adjustment” on page 7.
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g u p y o u r LC D M o n i t o r
(b)
(a)
(1)
Figure 4. Cable connections (Digital)
Turn off your computer and unplug its power cord.
1
2
3
4
5
6
7
8
Connect the signal cable to the DVI-D connector (1) on the back of your monitor.
Connect the other end of the cable to the video port on the back of your workstation.
Connect the power cord for your monitor to the power port on the power adapter.
Secure the power adapter cord and the signal cable(s) under the metal prong.
Insert the tab on each side of the hinge cover (b) then attach the stand of the monitor.
Plug the power cords of your computer and your monitor into a nearby outlet.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
Perform the auto adjustment procedure as described in “Auto Adjustment” on page 7.
English
6
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g u p y o u r LC D M o n i t o r
Getting Help
If your monitor does not display an image, check your cable connections and refer to
“Troubleshooting” on page 17. If you experience difficulties with the quality of the displayed
image, run auto adjustment again and refer to “Adjusting Your LCD Monitor” on page 10 or
“Troubleshooting” on page 17.
Plug and Play
®
Our adoption of the new VESA Plug and Play solution eliminates complicated and time
consuming setup. It allows you to install your monitor in a Plug and Play compatible system
without the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display. This monitor automatically tells the PC system its Extended
Display Identification (EDID) data using Display Data Channel (DDC) protocols so the PC
system can automatically configure itself to use the LCD Monitor.
Auto Adjustment
Even though your computer system can recognize your new LCD Monitor system, the auto
adjustment function will optimize the display settings for use with your computer. Auto
Adjustment can be accessed through the
On-Screen Menu, see “Image Lock:” on page 13 or use the direct access instructions below:
Turn on your computer and monitor.
1
2
3
Push the AUTO button to open the Auto Adjustment OSD.
The screen will dim and you may notice small changes to the screen image.
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g u p y o u r LC D M o n i t o r
Self-Test Feature Check (STFC)
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly. If your monitor and computer are properly connected but the monitor
screen remains dark and the power indicator is blinking, run the monitor self-test by
performing the following steps:
Turn off both your computer and the monitor.
1
2
3
Unplug the video cable from the back of the computer.
Turn on the monitor.
If the monitor is functioning properly, you will see a white box with a red border and black
text inside as shown in the following illustration:
No Connection
Check Signal Cable
Figure 5. Monitor self test screen
The three boxes inside the border are red, green and blue. Failure of any of the boxes to
appear indicates a problem with your monitor. This box also appears during normal operation
if the video cable becomes disconnected or damaged.
Turn off your monitor and reconnect the video cable; then turn on both your computer
4
and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.
English
8
Download from Www.Somanuals.com. All Manuals Search And Download.
A d j u s t i n g Y o u r LC D M o n i t o r
User Controls
Your LCD Monitor allows you to easily adjust the characteristics of the image being
displayed. All of these adjustments are made using the control buttons on the front of the
monitor. While you use these buttons to adjust the controls, an on-screen menu shows you
their numeric values as the change.
1
3
4
2
5
AUTO EXIT
MENU
A
B
Figure 6. User controls
No.
Name
Description
■
Activates the Auto Adjustment function
AUTO
EXIT
1
■
■
Exits from the OSD while the OSD is displayed
Slects the Video signal (A or B) while the OSD is off
2
3
■
Moves the selector between menus and sub-menus on
the OSD
Decreases or increases values of the selected function
Directly adjusts the brightness level if pressed while the
OSD is off (See the section on "Direct-Access Features" on
page 10.)
– / +
■
■
Brightness
MENU
■
■
Opens the OSD and sub-menus
Selects the highlighted function
4
5
■
■
■
Turns the monitor on and off
Power button
and indicator
light
Glows green during normal operation
Glows amber, blinks amber, or blinks green / amber while
the monitor is in a power saving mode. (See "Power-
saving modes" on page 16.)
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
A d j u s t i n g Y o u r LC D M o n i t o r
Automatic Save
Whenever you open the on-screen menu and allow an adjustment window to remain active
for about 3 seconds without pressing another button, the monitor automatically saves any
adjustments you have made. These changes are saved into a user area in the monitor. User
areas are reserved according to the signal frequency from your computer. The monitor can
save adjustments for up to 5 user modes. It has ten factory preset or preload modes, one for
each signal frequency as listed in “Display Modes” on page 21
If you have made no adjustments, the on-screen menu disappears and the monitor does not
save anything. To exit without saving the changes you have made, press the EXIT button
before the 2 seconds elapse.
Direct-Access Features
The features described in this section can be accessed quickly, at the touch of one button.
Once you finish making adjustments to a feature, push the EXIT button to turn off the menu
or allow the OSM to time-out and disappear automatically.
Brightness
Follow these instructions to adjust the brightness of
the monitor’s display.
Brightness
99
With the menu off, push the “–” or “+”
1
2
button. The brightness display appears.
Push the “+” button to increase the
brightness; push the “–” button to decrease
the brightness.
English 10
Download from Www.Somanuals.com. All Manuals Search And Download.
A d j u s t i n g Y o u r LC D M o n i t o r
Auto Adjustment
Follow these instructions to enable or disable the
automatic screen adjustments for your monitor.
Auto Adjustment
25
With the menu off, push the EXIT button.
1
2
The automatic adjustment display appears.
Follow the directions previously given on
page 7.
OSD Lock/Unlock
Use this function to secure the current settings, while allowing you to adjust the Brightness
and Contrast, so that they cannot be inadvertently changed. You can unlock the OSD controls
at any time by using the same procedure.
Push and hold the MENU button for 5 seconds to Lock or Unlock the controls. When
locked, a “LOCKED” message displays.
1
English 11
Download from Www.Somanuals.com. All Manuals Search And Download.
A d j u s t i n g Y o u r LC D M o n i t o r
On-Screen Menu System (OSD)
Function icons
Brightness
Function name
Setting slidebar
99
Numeric value
indicator
Figure 7. On-Screen Menu (OSD)
Accessing the Menu System
With the menu off, push the MENU button to open the menu system and display the
1
2
main function menu.
Push the “–“ and “+“ buttons to move between the function icons. As you move from
one icon to another, the function name changes to reflect the function or group of
functions represented by that icon. See the Menu adjustments table to view a
complete list of all the functions available for the monitor.
Push the MENU button once to activate the highlighted function then use the “–” and
3
4
“+” buttons, according to the indicators on the menu, to make your changes.
Push the EXIT button once to return to the main menu to select another function or
push the EXIT button 1 or 2 times to exit from the OSD.
English 12
Download from Www.Somanuals.com. All Manuals Search And Download.
A d j u s t i n g Y o u r LC D M o n i t o r
Table 1. Menu Adjustments
Settings and
Sub-menus
Icon
Description
Image Lock:
Image Lock controls adjust for and limit the amount of
noise in the video signal which causes horizontal lines
or areas on the screen where the image appears to be
unstable and jitters or shimmers.
■
■
Fine
Coarse
The Fine and Coarse adjustments allow you to more
closely adjust your monitor to your preference.
Use the “–, +” buttons to adjust away interference.
If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use
Fine again.
This function may change the width of the display
image. Use the Horizontal function on the Position
menu to center the display image on the screen.
Position:
Position moves the viewing area around on the
monitor screen.
■
Horizontal
Vertical
■
Color Control:
Color Controls adjust the color hue and saturation. The
color hue is most noticeable in areas of white.
■
■
■
R(ed)
G(reen)
B(lue)
English 13
Download from Www.Somanuals.com. All Manuals Search And Download.
A d j u s t i n g Y o u r LC D M o n i t o r
Table 1. Menu Adjustments (Continued )
Settings and
Sub-menus
Icon
Description
Reset:
Reset controls return the settings to the factory preset
values for the selected group of functions. Geometry
changes the Position settings, Image Lock settings
and changes the Image Size to Expand 2.
Color changes the RGB settings back to their original
factory settings.
■
■
Geometry
Color
Language:
Language sets the OSD to display in one of six
languages (English, French, German, Spanish, Italian,
or Svenska).
The language chosen affects only the language of the
OSD. It has no effect on any software running on the
computer.
■
■
■
■
■
■
English
Deutsch
Español
Français
Italiano
Svenska
Menu Display
Time:
The OSD stays active for as long as it is in use. Menu
Display Time sets the length of time the OSD will
remain active after the last time you pushed a button.
■
■
■
■
5 Seconds
10 Seconds
20 Seconds
200 Seconds
Menu Position:
Each time the OSD opens it displays in the same
location on the screen. Menu Position controls that
location.
■
Horizontal
Vertical
■
English 14
Download from Www.Somanuals.com. All Manuals Search And Download.
A d j u s t i n g Y o u r LC D M o n i t o r
Table 1. Menu Adjustments (Continued )
Settings and
Sub-menus
Icon
Description
Image Size:
If your computer or video board supplies a signal rate
and addressability lower than 1280 x 1024, this LCD
Monitor provides a scaling processor that can expand
the addressability up to 1280 x 1024.
■
■
■
Normal
Expanded 1
Expanded 2
Select the Normal setting to use the normal size
viewing area for the current signal. Expanded 1
expands the viewing area to the full width of the
monitor screen. Expanded 2 extends the viewing area
both horizontally and vertically to the full size of the
monitor screen.
Image Effect:
Image Effect optimizes the display for the type of
software you are using.
Scaling smooths an image which may help the eye to
see more detail.
■
Scaling
■
Filtering
Filtering sharpens text by adding a fine, contrasting
line around each character so that it is easier to
recognize.
English 15
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d i x
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep
Sleep”.
PowerSaver operates with a VESA DPMS compliant video card installed in your computer.
You use a software utility installed on your computer to set up this feature. See Table 2
below for details.
Table 2. Power-saving modes
Power-Saving Function mode (EPA/NUTEK)
Normal
State
Sleep Mode
Position A1
Deep Sleep Mode
Position A2
Operation
Standby Mode
Horizontal Sync
Vertical Sync
Video
Active
Active
Active
Inactive
Active
Blanked
Active
Inactive
Blanked
Inactive
Inactive
Blanked
Power
Indicator
Green
Amber
Green/Amber
Blinking
Amber
Blinking
(0.5 sec. interval) (1 sec. interval)
Power
Consumption
42W (Max.)
40W (Nom.)
Less than 5W
Less than 5W Less than 5W
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer’s mouse or press a key on the
keyboard.
®
This monitor is EPA ENERGY STAR compliant and NUTEK compliant when used with a
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
English 16
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d i x
Troubleshooting
Before calling for service, check the information in this section to see if you can remedy any
problems yourself
Table 3. Troubleshooting problems
Symptom
Corrective Actions
■
Check to see that both the LCD Monitor and the
computer are plugged in and turned on.
No Picture
■
Check the signal cable connection between the
computer and the LCD Monitor
“No Connection,
Check Signal Cable” appears
■
■
Use the LCD Monitor self test described on page 8.
Check the maximum resolution and the frequency on
the video port of your computer.
“Video mode not supported”
Picture is scrambled
■
■
Compare these values with the data in the preset
timing modes, page 21.
Check the signal cable connection between the
computer and LCD Monitor.
■
■
Perform Auto Adjustment (see page 7).
Adjust Fine and Coarse adjustments as needed (see
page 13).
Picture is not clear
Picture is fuzzy
■
■
Perform LCD Monitor reset.
Eliminate accessories (i.e., video extension cables).
■
Check the signal cable connection between the
computer and LCD Monitor
Picture bounces or has wavy
oscillations
■
Check the signal cable connection between the
computer and LCD Monitor.
Picture appears to be ghosting
■
■
■
Adjust the Brightness and Contrast settings.
The image is too light or too dark
Color is not uniform
Adjust the color settings using the OSD COLOR menu.
Adjust the color settings using the OSD COLOR menu.
The colors are distorted with dark or
shadowed areas
English 17
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d i x
Table 3. Troubleshooting problems (Continued )
Symptom
Corrective Actions
■
■
Adjust the color settings using the OSD COLOR menu.
White does not look white
Adjust the Horizontal and Vertical position settings
using the OSD.
Screen image is not centered or
sized properly
■
■
Check the image size selection (see page 15).
Run Auto Adjustment (see page 7).
■
The LCD Monitor is saving your changes to the OSD.
The power indicator blinks amber
once
■
The LCD Monitor is using its power management
system. Check the power management utility on your
computer.
The power indicator is blinking
green/amber or is blinking amber
only
■
■
Please contact Samsung customer service.
Cannot adjust LCD Monitor with the
buttons on the front panel
You can download the driver from the internet at
downloads/monitor/index.html
You need the monitor driver
software
English 18
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d i x
Specifications
Table 4. Specifications
Analog Input
Digital Input
LCD Monitor Panel
* Synchronization
43 cm (17") LCD Monitor
0.264 mm Pixel pitch
Viewing Angle: 80/80/80/80 (U/D/L/R) (Degrees)
Horizontal: 30 kHz to 81 kHz
Vertical: 56 Hz to 85 Hz (~XGA)
60 Hz to 76 Hz (SXGA)
Horizontal: 30 kHz to 63.3 kHz
Vertical: 60 Hz to (SXGA)
56 Hz to 85 Hz (~XGA)
Display Colors
16.7 Million Colors
Maximum Resolution
Horizontal:
Vertical:
1280 Dots @ 81 kHz
1024 Lines @ 76 Hz
1280 Donts @ 63.3 kHz
1024 Lines @ 60 Hz
Active Display
Horizontal:
Vertical:
338 3 mm (13.3" 0.12”)
270 3 mm (10.6" 0.12”)
(Active display size is dependent upon signal timing and image size
selection.)
Input Signal, Terminated Analog video 0.7 Vpp positive at 75 Ω
TMDS
Separate sync, composite, and sync-on-
green
Maximum Pixel Clock
Power Adapter
135 MHz
108 MHz
AC 90-264 Volt, 60 Hz/50 Hz 3 Hz
42 W (Maximum), 40 W (Nominal)
Power Consumption
Dimensions/Weight
(W x D x H)
Unit:
440 x 220 x 458.5 mm; 8 kg (17.3 x 8.7 x 18.1 in; 17.6 lb)
Carton: 570 x 580 x 315 mm; 10.4 kg (22.4 x 22.8 x 12.4 in; 23 lb)
(All measurements approximate)
VESA Mounting
Interface
100 mm x 100 mm
(For use with Specialty (Arm) Mounting hardware.)
Environmental
Considerations
Operating Temperature: 50°F to 104°F (10°C to 40°C)
Humidity: 10% to 80%
Storage Temperature: -68°F to 113°F (-20°C to 45°C)
Humidity: 5% to 95%
NOTE: Design and specifications are subject to change without prior notice.
* Referring to Standard signal modes, see page 21.
English 19
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d i x
Pin Assignments
Table 5. 15-Pin D-SUB connector
15-Pin Side of the
Signal Cable
15-Pin Side of the
Signal Cable
Pin No.
Pin No.
1
2
3
4
5
6
7
8
Red
Green
Blue
9
NC
GND-Sync/Self test
GND
10
11
12
13
14
15
GND
GND (DDC Return)
GND-R
DDC Data
H-Sync
V-Sync
GND-G
GND-B
DDC Clock
Table 6. DVI-D Connector
Pin
Signal Assignent
Pin
Signal Assignen
1
2
T.M.D.S. Data2-
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
13
14
15
16
17
18
19
20
21
22
23
24
No Connect
+5V Power
3
Ground(for +5V)
Hot Plug Detect
T.M.D.S. Data0-
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
4
5
No Connect
6
DDC Clock
7
DDC Data
8
No Connect
9
T.M.D.S. Data1-
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
10
11
12
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-
English 20
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d i x
Display Modes
For the display modes listed below, the screen image has been optimized during
manufacture.
Table 7. Preset timing modes
Horizontal
Frequency
(kHz)
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
Display Mode
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
31.469
31.469
37.500
43.269
46.875
53.674
48.363
60.023
68.677
79.976
63.300
70.087
59.940
75.000
85.008
75.000
85.061
60.004
75.029
84.997
75.025
60.000
28.322
25.175
31.500
36.000
49.500
56.250
65.000
78.750
94.500
135.000
108.000
–/+
–/–
–/–
–/–
+/+
+/+
–/–
+/+
+/+
+/+
–/–
A
800 x 600
1024 x 768
1024 x 768
A
1024 x 768
A
1280 x 1024
1280 x 1024
A
✱Display modes marked
will be blocked during “Digital Input.”
English 21
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d i x
Changing the Stand
Removing the Stand
(a)
Turn off your monitor and unplug its power cord.
1
2
3
Lay the LCD Monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
Remove the 4 screws (a) and then remove the Stand from the LCD Monitor.
English 22
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d i x
Attaching an Arm-Type Stand or Wall Mount Hanger
NOTE: This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad.
Rear cover
Mounting
Interface Pad
Align the Mounting Interface Pad with the holes in the Rear Cover and secure it with
the four screws that came with the Arm-type Stand or Wall Mount Hanger.
1
Maintenance of Your LCD Monitor
WARNING: To avoid risk of electric shock, do not disassemble the monitor cabinet (except
for gaining access to the cable connectors as described on page 6). Users cannot service the
monitor. User maintenance is restricted to cleaning as explained below:
Unplug the monitor from the power outlet before cleaning.
■
To clean your LCD Monitor screen, lightly dampen a soft, clean cloth with water or
mild detergent. If possible, use a special screen cleaning tissue or solution suitable
for the antistatic coating.
■
■
To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent.
Never use flammable cleaning material to clean your LCD Monitor or any other
electrical apparatus.
English 23
Download from Www.Somanuals.com. All Manuals Search And Download.
R e g u l a t o r y In f o r m a t i o n
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD
America QA Lab of Samsung
85 West Tasman Drive
FCC Information
User Instructions
The Federal Communications Commission Radio
Frequency Interference Statement includes the
San Jose, CA 95134 USA
following warning:
Tel) 408-544-5124
Fax) 408-544-5191
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
Provided with this monitor is a detachable power
pursuant to Part 15 of the FCC Rules. These limits are
supply cord with IEC320 style terminations. It may be
designed to provide reasonable protection against
suitable for connection to any UL Listed personal
harmful interference in a residential installation. This
computer with similar configuration. Before making the
equipment generates, uses, and can radiate radio
connection, make sure the voltage rating of the
frequency energy and, if not installed and used in
computer convenience outlet is the same as the
accordance with the instructions, may cause harmful
monitor and that the ampere rating of the computer
interference to radio communications. However, there
convenience outlet is equal to or exceeds the monitor
is no guarantee that interference will not occur in a
voltage rating.
particular installation.
For 120 Volt applications, use only UL Listed detachable
If this equipment does cause harmful interference to
power cord with NEMA configuration 5-15P type
radio or television receptions, which can be determined
(parallel blades) plug cap. For 240 Volt applications use
by turning the equipment off and on, the user is
only UL Listed Detachable power supply cord with
encouraged to try to correct the interference by one or
NEMA configuration 6-15P type (tandem blades) plug
more of the following measures:
cap.
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and
receiver.
IC Compliance Notice
■ Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV tech-
nician for help.
This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment
Regulations of ICES-003.
Cet appareil Numérique de classe B respecte toutes les
exigences du Règlemont ICES-003 sur les équipements
produisant des interférences au Canada.
User Information
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
If necessary, consult your dealer or an experienced
radio/television technician for additional suggestions.
You may find the booklet called How to Identify and
Resolve Radio/TV Interference Problems helpful. This
booklet was prepared by the Federal Communications
Commission. It is available from the U.S. Government
Printing Office, Washington, DC 20402, Stock Number
004-000-00345-4.
MPR II Compliance
This monitor complies with SWEDAC(MPR II)
recommendations for reduced electric and magnetic
fields.
European Notice
Products with the CE Marking comply with both the
EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC)
and the Low Voltage Directive (73/23/EEC) issued by
the Commission of the European Community.
Compliance with these directives implies conformity to
the following European Norms:
Warning
User must use shielded signal interface cables to
maintain FCC compliance for the product.
Declaration of conformity for products
Marked with FCC Logo
■ EN55022 (CISPR 22) – Radio Frequency Interference
■ EN50082-1 : 1992 – Electromagnetic Immunity
■ EN60555-2 (IEC555-2) – Power Line Harmonics
■ EN60555-3 (IEC555-3) – Voltage Fluctuations
■ EN60950 (IEC950) – Product Safety.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
U.S.A. :
Samsung Electronics America (SEA)
One Samsung Place
Ledgewood, NJ 07852
Tel. : 1-800-SAMSUNG (1-800-726-7864)
ESPAÑA :
Samsung Electrónics Comercial Ibérica, S.A.
Ciencies, 55-65 (Polígono Pedrosa) 08908
Hospitalet de Llobregat (Barcelona)
Tel. : (93) 261 67 00
Fax. : (93) 261 67 50
CANADA :
Samsung Electronics Canada Inc.
7037 Financial Drive
Mississauga, Ontario L5N 6R3
Tel. : 1-800-SAMSUNG (1-800-726-7864)
Fax. : (905) 542-1199
UK :
Samsung Electronics (UK) Ltd.
Samsung House, 225 Hook Rise South
Surbiton, Surrey KT6 7LD
Tel. : (0181) 391 0168
Fax. : (0181) 397 9949
GERMANY :
<European Service Center & National Service>
Stafford Park 12 Telford, Shropshire, TF3 3BJ
Tel. : (01952) 292 262
Samsung Electronics GmbH Samsung-Haus
Am Kronberger Hang 6/65824 Schwalbach/Ts.
Tel. : 06196-66-1134
Fax. : (01952) 292 033
Fax. : 06196-66-1133
THAILAND :
AUSTRALIA :
Samsung Service Center
Samsung Electronics Australia Pty Ltd.
Unit G, 10-16 South Street,
Rydalmere, N.S.W. 2116
P.O. BOX 368
729-729/1 JSP Tower Rachadapisek RD.,
Bangpongpang, Yannawa, Bangkok 10120
Tel : (662) 2954508-14
Fax : (662) 2954267
Tel. : (02) 638-5200
SOUTH AFRICA :
ITALIA :
Samsung Electronics Italia SpA
Via C. Donat Cattin,
5-20063 Cernusco sul Naviglio (Mi)
Tel. : 167-010740
Samsung Electronics South Africa
Somerset Office Park 5 Libertas Road
Bryanston, South Africa
Tel : (27)-11-463-5678
Fax : (27)-11-463-5215
PANAMA :
BRASIL :
Servicios Samsung (Zona Libre), S.A.
50 and 61 Streets Sta, Cecilia
Bdl. Don Camilo, Panama City
Tel. : (507) 264-0195 or 269-5571
Fax : (507) 269-5568
Samsung Eletrônica da Amazonia Ltda.
R. Prof. Manoelito de Ornellas, 303-2º Andar
Chácara Sto. Antônio • cep : 04719-040
São Paulo • SP
Tel. : (011) 541-8500
Fax : (011) 523-3995, 522-0726
MEXICO
Samsung Electronics Mexico S.A. de C.V.
Saturno 44 Col. Nva. Industrial Vallejo
Del. Gustavo A. Madero C.P. 07700
SWEDEN:
Samsung Electronics Svenska, AB
Box 713, S-194 27 Upplands Vasby
Tel.: (468) 590-966-00
Mexico D.F.
RFC: SEM950215S98
Tel. 5747-5100
Fax : (468) 590-966-50
IMPORTADO POR:SAMSUNG ELECTRONICS MEXICO S.A. DE C.V.
SATURNO 44 COL. NVA. INDUSTRIAL VALLEJO
DEL. GUSTAVO A. MADERO C.P. 07700
“As an ENERGYSTAR® Partner, SAMSUNG has
determined that this product meets the
ENERGYSTAR® guidelines for energy efficiency.”
MEXICO D.F.
TEL. 5747-5100
RFC: SEM950215S98
EXPORTADO POR: SAMSUNG ELECTRONICS CO.,LTD.
JOONG-ANG DAILY NEWS BLDG.
P/N: BN68-00147B-00
7 SOON-WHA-DONG CHUNG-KU,
C.P.O BOX 2775, 1144 SEOUL, KOREA
Printed on recyclable paper
Download from Www.Somanuals.com. All Manuals Search And Download.
|