Samsung DVD Player DVD VR320 User Guide

Instruction Manual

DVD-VR320

www.samsung.com

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Exterior interference such as lightning and static elec-

tricity can affect normal operation of this recorder. If

this occurs, turn the DVD Recorder & VCR off and on

again with the POWER button, or disconnect and then

reconnect the AC power cord to the AC power outlet.

The recorder will operate normally.

Precaution

• Be sure to remove the disc and turn off the recorder after

use.

•

Disconnect the AC power cord from the AC outlet

when you don’t intend to use the recorder for long

periods of time.

Clean the disc by wiping in a straight line from the

inside to the outside of the disc.

Important Safety Instructions

Read these operating instructions carefully before using

the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future refer-

ence.

Maintenance of Cabinet

1) Read these instructions.

2) Keep these instructions.

For safety reasons, be sure to disconnect the AC power

cord from the AC outlet.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

•

Do not use benzene, thinner, or other solvents for

cleaning.

•

Wipe the cabinet with a soft cloth.

7) Do not block any ventilation openings, Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radi-

ators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized

or grounding- type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are pro-

vided for your safety. if the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Disc Handling

•

Use discs with regular shapes.

If an irregular disc (a disc with

a special shape) is used, this

DVD Recorder & VCR may be

damaged.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience recep-

tacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

Holding discs

•

Avoid touching the surface of a disc

where recording is performed.

12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-sup-

ply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or mois-

ture, does not operate normally, or has been

dropped.

DVD-RAM, DVD-RW and DVD-R

•

Clean with an optional DVD-RAM/PD

disc cleaner.

Do not use cleaners or cloths for CDs

to clean DVD-RAM/ DVD-RW/DVD-R

discs.

DVD-Video, CD

•

Wipe off dirt or contamination on the disc with a soft

cloth.

Handling Cautions

• Before connecting other components to this

recorder, be sure to turn them all off.

Cautions on handling discs

• Do not move the recorder while a disc is being

played, or the disc may be scratched or broken,

and the recorder’s internal parts may be damaged.

• Do not put a flower vase filled with water or any

small metal objects on the recorder.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the

disc tray.

•

Do not write on the printed side with a ball-point pen

or pencil.

Do not use record cleaning sprays or antistatic. Also,

do not use volatile chemicals, such as benzene or

thinner.

English - 3

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Do not apply labels or stickers to discs. (Do not use

discs fixed with exposed tape adhesive or leftover

peeled-off stickers.)

Do not use scratch-proof protectors or covers.

Do not use discs printed with label printers available

on the market.

JPEG CD-R/RW

•

Only JPEG files with the ".jpg", ".JPG" extension can be

used.

The unit can handle a maximum of 1000 files and folders.

Maximum size of progressive JPEG is 3M pixels.

MOTION JPEG is not supported.

•

Do not load warped or cracked discs.

Using CD-R/RW

Disc Storage

•

Use a 700MB(80 minutes) CD-R/RW disc.

If possible, do not use a 800MB(90 minutes) or above disc,

as the disc may not play back.

Be careful not to harm the disc because the data on

these discs is highly vulnerable to the environment.

•

Do not keep under direct sunlight.

Keep in a cool ventilated area.

Store vertically.

Keep in a clean protection jacket.

If you move your DVD Recorder & VCR suddenly from

a cold place to a warm place, condensation may gen-

erate on the operating parts and lens and cause

abnormal disc playback. If this occurs, remove the

disc and wait for one to two hours with the power on

before attempting playback.

If the CD-R/RW disc was not recorded as a closed session,

you may experience a delay in the early play-back time, and

all recorded files may not play.

Some CD-R/RW discs may not be playable with this unit,

depending on the device which was used to burn them.

For contents recorded on CD-R/RW media from CDs for

your personal use, playability may vary depending on con-

tents and discs.

DVD-R Disc Playback and Recording

Disc Specifications

•

Once a DVD-R recorded in Video Mode is finalized, it

becomes DVD-Video.

DVD-Video

You can record onto the available space on the disc and

perform editing functions such as giving titles to discs and

programs and erasing programs before finalizing.

When programming is erased from a DVD-R, that space

does not become available. Once an area on a DVD-R is

recorded on, that area is no longer available for recording,

whether the recording is erased or not.

It takes about 30 seconds for the unit to complete recording

management information after recording finishes.

This product optimizes the DVD-R for each recording.

Optimizing is carried out when you start recording after

inserting the disc or turning on the unit. Recording onto the

disc may become impossible if optimizing is carried out too

many times.

Playback may be impossible in some cases due to the con-

dition of recording.

This unit can play back DVD-R discs recorded and finalized

with a Samsung DVD video recorder. It may not be able to

play some DVD-R discs depending on the disc and the con-

dition of the recording.

•

A digital versatile disc (DVD) can contain up to 135-

minutes of images, 8 audio languages and 32 subtitle

languages. It is equipped with MPEG-2 picture com-

pression and Dolby 3D surround, allowing you to

enjoy vivid and clear theater quality images in the

comfort of your own home.

•

When switching from the first layer to the second layer

of a double-layered DVD Video disc, there may be

momentary distortion in the image and sound.

This is not a malfunction of the unit.

Once a DVD-RW/-R recorded in Video Mode is final-

ized, it becomes DVD-Video.

•

Audio CD

•

An audio disc on which 44.1kHz PCM Audio is record-

ed.

Plays CD-DA format audio CD-R and CD-RW discs.

This unit may not be able to play some CD-R or CD-

RW discs due to the condition of the recording.

DVD-RW Disc Playback and Recording

CD-R/RW

•

Recording and playback can be performed on DVD-RW

discs in both Video and VR Modes.

Once a DVD-RW recorded in VR Mode is finalized, you can-

not perform additional recording.

Once a DVD-RW recorded in Video Mode is finalized, it

becomes DVD-Video.

In both modes, playback can be performed before and after

finalization, but additional recording, deleting and editing can

not be performed after finalization.

MP3 CD-R/RW

•

Only CD-R discs with MP3 files recorded with

ISO9660 or JOLIET format can be played back

Only MP3 files with the "mp3" or "MP3" extension can

be used.

For MP3 files recorded with a VBR(Variable Bit

Rates), from 32 Kbps to 320 Kbps, the sound may cut

in out.

•

If you want to record the disc in VR Mode and then record in

V Mode, be sure to execute Format. Be careful when exe-

cuting Format because all the recorded data may be lost.

A DVD-RW blank disc is initialized to VR Mode when first ini-

tialized.

•

Playable bitrate range is from 56Kbps to 320Kbps.

The unit can handle a maximum of 1000 files and fold-

ers.

4 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

•

DVD-RW (VR mode)

Do not use the following discs!

- This is a format that is used for recording data on a DVD-

RAM or DVD-RW disc. You can record multiple titles,

edit, delete, partial delete, create a playlist, etc.

- A disc that is recorded in this mode may not be played

by existing DVD players.

•

LD, CD-G, CD-I, CD-ROM, DVD-ROM, VCD, DVD+R

and DVD+RW discs should not be used in this product.

[Note]

•

DVD-RW (Video mode)

Disc types that can be played : CD/CD-R/CD-RW/MP3/

JPEG/DVD-Video/DVD-RAM/ DVD-RW/DVD-R. However,

if your DVD-RW disc was recorded with another device, it

can be played only if it was recorded and finalized in video

mode.

This is a format that is used for recording data on a

DVD-RW or DVD-R disc. The disc can be played by an

existing DVD player once it has been finalized.

- If a disc that has been recorded in Video mode by a dif-

ferent manufacturer's recorder but has not been finalized

it cannot be played or additionally be recorded by this

recorder.

•

Some commercial discs and DVD discs purchased out-

side your region may not be playable with this product.

When these discs are played, either “No disc.” or

“Please check the regional code.” will be displayed.

If your DVD-RW disc is an illegal copy or is not in DVD

video format, it may also not be playable.

DVD-RAM Disc Playback and Recording

•

For cartridge type DVD-RAM discs, remove the

cartridge and use the disc only.

Ensure that the recording mode is set to VR mode.

Otherwise, this product will not be able to play the

recording.

You cannot play a DVD-RAM in most DVD players due

to compatibility issues.

Only DVD-RAM standard Version 2.0 discs can be

played in this unit.

•

❇ We recommend using one of the discs in the table

as they have been confirmed to be compatible with

this unit. Other discs may not perform correctly.

•

Media

Brand

Speed

TDK

DVD-RAM recorded on this unit may not work with other

DVD Players. To determine compatibility with these DVD-

RAM discs, refer to the user’s manual for the player.

Beall

Sony

DVD-R

That’s

COPY PROTECTION

Mitsubishi

Maxell

•

Many DVD discs are encoded with copy protection.

Because of this, you should only connect your DVD

Recorder & VCR directly to your TV, not to a VCR.

Connecting to a VCR results in a distorted picture

from copy-protected DVD discs.

This product incorporates copyright protection tech-

nology that is protected by methods claims of certain

U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is

prohibited.

Panasonic

TDK

Maxell

Optodisc

JVC

DVD-RW

Mitsubishi

Radius

Verbatim

Maxell

Fujifilm

Panasonic

TDK

DVD-RAM

Panasonic Gold

Panasonic

Protection

•

Program-protected: See page 66 “Locking a Title”

Disc-protected: See page 78 “Disc Protection”

Disc

No. of maximum recordings by disc type

❋

DVD-RAM/DVD-RW/DVD-R discs that are incompatible

with the DVD-VIDEO format cannot be played with this

product.

DVD-RAM

DVD-RW

DVD-R

100,000

1,000

❋

For more information on DVD recording compatibility,

consult your DVD-RAM/DVD-RW/DVD-R manufacturer.

•

We take no responsibility and offer no compensation for

any recording failure, loss of recorded or edited material

and/or damage to the recorder arising from usage of

non-recommended discs.

Use of poor quality DVD-RAM/DVD-RW/DVD-R discs

may cause following unexpected problems including,

without limitation, recording failure, loss of recorded or

edited materials or damage to the recorder.

English - 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 4 : Connecting the Audio cable . . . . . . . . . . .18

Method 1 : Connecting to your TV . . . . . . . . . . . . . . .18

Method 2 : Connecting to a stereo amplifier with

Contents

analog input jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Method 3: Connecting to an AV amplifier with a

digital input jack . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Step 5 : Connecting external devices . . . . . . . . . . .19

Method 1 : Connecting a VCR, Set-Top Box(STB)

or DVD player to the AV IN 1 jacks . . . . . . . . . . . . . . .19

Method 2 : Connecting a Camcorder to the

Getting Started

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

AV IN 2 jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Method 3 : Connecting a Camcorder to the

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . .

Handling Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance of Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . .

Disc Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disc Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disc Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DV IN jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Step 6 : Connecting the Power Cord . . . . . . . . . . .20

Step 7 : Preparing the Remote Control . . . . . . . . .20

Setting the Remote Control . . . . . . . . . . . . . . . . . . . . .21

General Features . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Before Reading the User’s Manual . . . . . . . . . . . . .8

How to use the DVD Recorder & VCR . . . . . . . . . . .9

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

System Setup

On-Screen Menu Navigation . . . . . . . . . . . . . . . . .22

Auto Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . . .24

Channel Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . .25

Channel Add/Delete . . . . . . . . . . . . . . . . . . . . . . .26

RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . .26

Setting Up the Language Options . . . . . . . . . . . . .27

Setting Up the Audio Options . . . . . . . . . . . . . . . .28

Setting Up the Display (Video) Options . . . . . . . . .29

Setting Up the Parental Control . . . . . . . . . . . . . . .30

VCR Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Front Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

DVD EP Mode Time . . . . . . . . . . . . . . . . . . . . . . .33

Automatic Chapter Creator . . . . . . . . . . . . . . . . . .34

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . .13

Connecting & Setting Up

Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Step 1 : Unpacking . . . . . . . . . . . . . . . . . . . . . . . . .15

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Step 2 : Connecting the Antenna cable . . . . . . . . . .15

Method 1 : Antenna + DVD Recorder & VCR +

TV : No Cable box . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Method 2 : Antenna +Cable box +

DVD Recorder & VCR + TV : Cable box with many

scrambled channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Method 3 : Antenna + DVD Recorder & VCR +

Playback

Cable box +TV : Cable box with a few

scrambled channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Step 3 : Connecting the Video cable . . . . . . . . . . . .16

Method 1 : Connecting to a Video input jack . . . . . . . . .16

Method 2 : Connecting to an S-video input jack . . . . . . .17

Method 3 : Connecting to Component video input

ꢁ

DVD Playback

Before Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Using the Disc Menu and Title Menu . . . . . . . . . . .37

Using the Search & Skip Functions . . . . . . . . . . . .37

Slow Motion Play / Step Motion Play . . . . . . . . . . .38

About ANYKEY . . . . . . . . . . . . . . . . . . . . . . . . . . .38

jacks(Y,P ,P ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

6 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Selecting the Subtitle & Audio Language . . . . . . . .41

Changing the Camera Angle . . . . . . . . . . . . . . . . .42

Zooming-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Using the Bookmarks . . . . . . . . . . . . . . . . . . . . . .43

Using the Markers . . . . . . . . . . . . . . . . . . . . . . . . .44

Playing back an Audio CD (CD-DA) . . . . . . . . . . . .45

Playing back an MP3 CD . . . . . . . . . . . . . . . . . . . .46

Play Option Mode . . . . . . . . . . . . . . . . . . . . . . . . .47

To Program Tracks . . . . . . . . . . . . . . . . . . . . . . . . .47

Playing a picture CD . . . . . . . . . . . . . . . . . . . . . . .48

Editing

Playing the Title List . . . . . . . . . . . . . . . . . . . . . . . .63

Basic Editing (Title List) . . . . . . . . . . . . . . . . . . . . .65

Renaming(Labeling) a Title . . . . . . . . . . . . . . . . . . . . .65

Locking(Protecting) a Title . . . . . . . . . . . . . . . . . . . . . .66

Deleting a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Deleting a Section of a Title . . . . . . . . . . . . . . . . . . . .67

Advanced Editing (Playlist) . . . . . . . . . . . . . . . . . . .69

Creating a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Playing Titles in the Playlist . . . . . . . . . . . . . . . . . . . . .70

Renaming a Playlist Title . . . . . . . . . . . . . . . . . . . . . . .71

Editing a Scene for the Playlist . . . . . . . . . . . . . . . . . .72

Copying a Playlist Title to the VCR . . . . . . . . . . . . . . .75

Deleting a Playlist Title from the Playlist . . . . . . . . . . .76

Disc Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Editing the Disc Name . . . . . . . . . . . . . . . . . . . . . .77

Disc Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Formatting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Finalizing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Delete All Title Lists . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Unfinalizing a disc (V/VR mode) . . . . . . . . . . . . . . . . .81

ꢁ

VCR Playback

Playing the VCR . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Special VCR Playback Features . . . . . . . . . . . . . .49

S-VHS Playback . . . . . . . . . . . . . . . . . . . . . . . . . .49

Variable Search System . . . . . . . . . . . . . . . . . . . . .50

Recording

ꢁ

DVD Recording

Before Recording . . . . . . . . . . . . . . . . . . . . . . . . .51

Recordable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Recording Formats . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Unrecordable video . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Recording the current channel you are watching .53

Recording From External Devices . . . . . . . . . . . . .54

Recording through a DV Input jack . . . . . . . . . . . .54

Making a One Touch Recording(OTR) . . . . . . . . . .55

Making a Timer Recording . . . . . . . . . . . . . . . . . . .55

Editing the Scheduled Record List . . . . . . . . . . . . .57

Deleting the Scheduled Record List . . . . . . . . . . . .58

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

ꢁ

VCR Recording

Basic VCR Recording . . . . . . . . . . . . . . . . . . . . . .59

Check Remaining Time . . . . . . . . . . . . . . . . . . . . .59

Special Recording Features . . . . . . . . . . . . . . . . .60

Copy to DVD or VCR . . . . . . . . . . . . . . . . . . . . . . .61

English - 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Reading the

User’s Manual

General Features

Make sure to check the following terms before reading

the user’s manual.

The DVD-VR320 allows you to record and play high

quality digital video on DVD-RAM/DVD-RW/DVD-R

discs. You can record and edit digital video on

DVD-RAM/ DVD-RW/DVD-R discs as if they were VCR

tapes.

Icons that will be used in manual

Icon

Term

Definition

High quality digital audio and video recording and

playback

This involves a function available

in DVD or DVD-R/DVD-RW

discs that have been recorded

and finalized in Video Mode.

DVD

Record up to about 16-hour images with a double side 9.4

GB DVD-RAM disc, and up to about 8-hour images with a

4.7 GB DVD-RAM/DVD-RW/DVD-R disc, depending on the

recording mode.

This involves a function available

in DVD-RAM.

RAM

This involves a function available

in DVD-RW.

Creating DVD video titles using DVD-RW/DVD-R discs

With the DVD-VR320, VR320, you can create your own

DVD video titles on 4.7 GB DVD-RW/DVD-R discs.

This involves a function available

in DVD-R.

This involves a function available

in a data CD (CD-R or CD-RW).

A Variety of Recording Options

Select an appropriate recording mode between XP, SP, LP

and EP to meet your recording needs. (See page 52.)

• XP mode - High quality, about 1 hour

This involves a function available

in a data picture CD (CD-R or

CD-RW).

JPEG

MP3

• SP mode - Standard quality, about 2 hours

• LP mode - Low quality, about 4 hours

This involves a function available

in a data CD (CD-R or CD-RW

on which MP3 is recorded).

• EP mode - Lower quality, about 6 or 8 hours

Copying digital camcorder content using DV input jack

This involves a case where a

Caution function does not operate or

settings may be cancelled.

Record digital camcorder images onto DVD-RAM/

DVD-RW/DVD-R discs or video tape using the DV input

jack (IEEE 1394-4pin). (See page 19.)

This involves tips or instructions

NOTE

on the page that help each

function operate.

High quality progressive scan

Progressive scanning provides high resolution and flicker

free video. The 10-bit 54-MHz DAC, 2D Y/C Separating cir-

cuitry and Time Base Corrector processor technology pro-

vide you with the highest image playback and recording

quality. (See page 17.)

One-Touch A function that can be operated

button by using only one button.

ANYKEY A function that can be operated

button by using ANYKEY button.

Component progressive scan output video is available in

both DVD and VCR modes.

About the use of this user’s manual

A variety of functions with easy-to-use user

interface

1) Be sure to be familiar with Safety Instructions before

using this product. (See pages 2~5)

Integrated menu system and messaging functionality allow

you to perform the desired operations easily and conve-

niently. With a DVD-RAM/DVD-RW(VR mode) disc, you

can edit recorded images, create playlist, and edit video in

specific sequence according to your needs.

2) If a problem occurs, check the Troubleshooting.

(See pages 83~85)

manual may be reproduced or copied without the prior

written permission of Samsung Electronics Co.

8 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3

Recording

How to use the DVD

Recorder & VCR

There are two different recording methods: Direct

Recording and Timer Recording. Timer recording is

classified as a Date : Once, Daily or Weekly.

Recording mode : XP (high quality mode), SP (stan-

dard quality mode), LP (long recording mode), and

EP (extended mode).

Step 1

Select the disc type

This unit can record on the following types of discs.

If you want to repeatedly record on the same disc or

you want to edit the disc after recording, select a

rewritable DVD-RW or DVD-RAM type disc. If you

want to save a recording without any changes,

choose a non-rewritable DVD-R.

Step 4

Playing

You can select the title you want to play in a dis-

played menu and then immediately start playback.

A DVD consists of sections called titles, and sub

sections called chapters.

During recording, a title is created between two

points where you start and stop recording. Chapters

will be created automatically when you finalize

recording on DVD-R / DVD-RW discs in Video mode

with the Chapter Creator set to On. The chapter’s

length (interval between chapters) varies according

to the recording mode.

Step 2

Format the disc to start recording

Unlike a VCR, the recorder automatically starts for-

matting when an unused disc is inserted. This is

required for the preparation of recording on a disc.

Using a DVD-RAM

This type of disc can be formatted in DVD-Video

Recording format (VR mode). You can edit recorded

images and create a playlist in a specific sequence

according to your requirements.

Using a DVD-RW

This type of disc can be formatted in either DVD-

Video format (Video mode) or DVD-Video Recording

format (VR mode). For an unused disc, a message

that asks whether to format in VR Mode or not is dis-

played. You can play a video mode disc on various

DVD components. A VR mode disc allows more var-

ied editing.

Step 5

Editing a recorded disc

Editing on discs is easier than conventional video

tapes. The recorder supports many different edit

functions, possible only with DVDs.

With a simple and easy edit menu, you can operate

various edit functions, such as delete, copy, rename,

lock, etc., on a recorded title.

Using a DVD-R

This type of disc can be formatted in DVD Video for-

mat. After formatting is complete, you can record on

the disc. You can play this type of disc on various

DVD components only when they have been final-

ized.

Creating a playlist (DVD-RAM/-RW in VR

mode)

With this recorder, you can create a new playlist on

the same disc and edit it without the change of the

original recording.

■

You can only use either the VR or Video

mode on a DVD-RW, but not both at the

same time.

Note

■

You can change the DVD-RW format to

another format by reinitializing.

It should be noted that the disc's data will

be lost when changing formats.

English - 9

Download from Www.Somanuals.com. All Manuals Search And Download.

Finalizing & Playing on

other DVD components

Step 6

To play your DVD on other DVD components, finaliz-

ing may be necessary. First, finish all editing and

recording operations, then finalize the disc.

When using a DVD-RW disc in VR Mode

Although finalizing is generally unnecessary when

playing the disc on a VR Mode compatible compo-

nent, a finalized disc should be used for playback.

When using a DVD-RW disc in Video Mode

The disc should be finalized first to enable playback

on anything other than this recorder. No more editing

or recording can be made on the disc once it has

been finalized.

When using a DVD-R disc

You should finalize the disc to play it on a component

other than this recorder. You cannot edit or record on

the disc once it has been finalized.

10 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Description

Front Panel

1. DVD DECK

9. DV INPUT JACK

2. DVD OPEN/CLOSE BUTTON

3. VCR DECK

10. FRONT PANEL DISPLAY

11. DVD/VCR SELECT BUTTON

12. RECORD BUTTON

4. VCR EJECT BUTTON

5. POWER BUTTON

13. CHANNEL

BUTTONS

6. P.SCAN BUTTON

14. COPY BUTTON

7. VIDEO INPUT JACK (AV IN 2)

8. AUDIO L, R INPUT JACKS (AV IN 2)

15. PLAY/STILL, REW/SKIP, F.F/SKIP, STOP,

BUTTONS

Front Panel Display

1. DVD is activated.

7. DVD or CD media is loaded.

8. The time, counter position or current deck

status is indicated.

2. DVD-RAM is activated.

3. DVD-R or DVD-RW is activated.

4. Progressive Scan mode is activated.

5. Record function is activated.

6. VCR is activated.

9. When you set a Timer recording,

this indicator is it.

10. VHS Videotape is loaded.

English - 11

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

10 11

Fan

The fan always revolves when the power is on.

Ensure a minimum of 4” clear space on all sides of the fan

when installing the product.

1. AUDIO L, R OUT JACKS

6. VIDEO INPUT JACK (AV IN 1)

(COMPONENT OUT)

7. AUDIO L, R INPUT JACKS (AV IN 1)

8. AUDIO L, R OUT JACKS(AV OUT)

9. VIDEO OUT JACK(AV OUT)

10. ANT OUT (TO TV) JACK

11. ANT IN JACK

2. DIGITAL AUDIO OUT JACK (OPTICAL)

3. DIGITAL AUDIO OUT JACK (COAXIAL)

4. VIDEO OUT JACKS (COMPONENT OUT)

5. S-VIDEO IN/OUT JACKS

12 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

12. RETURN Button

Tour of the Remote Control

Returns to a previous menu.

13. TV/VCR Button

14. INFO Button

Press this to display current setting or disc status.

15. REC Button

Press this to make a recording on VCR, DVD-RAM/-

RW/-R discs.

16. DVD COPY Button

Press this when you copy from the VCR

to the DVD.

17. REC SPEED Button

Use this to set the desired recording time and

picture quality.

18. TV POWER Button

19. AUDIO/TV MUTE Button

Press this to access various audio functions.

This operates as sound mute. (TV mode)

20. TV Button

Press this to operate TV.

21. INPUT SEL. Button

Press this to select AV input signal in external input

mode.(Tuner, AV input, DV input)

22. OPEN/CLOSE Button

Press this to open and close the disc tray.

23. TIMER REC Button

Press this when you use Timer Recording.

24. MARKER Button

Press this to bookmark or mark a position while

playing a disc.

25. PLAY LIST(TITLE MENU) Button

Press this to enter the Edit playlist/Title menu.

26. ANYKEY Button

Press this to view the status of the disc that is being

played.

1. POWER Button

2. NUMBER Button

27. CLEAR Button

28. SUBTITLE Button

Press this to switch the DVD’s subtitle language.

3. 100+ Button

Press this to select channel 100 or higher.

29. ANGLE Button

Press this to access various camera angles on a

disc (if the disc contains multiple camera angles).

4. VCR Button

Press this when you use a VCR.

30. ZOOM Button

5. DVD Button

Press this when you use a DVD.

Zooms in on screen.

31. VCR COPY Button

6. TV Control Buttons

• VOLUME Button

Press this when you copy DVD to VCR.

TV volume adjustment

32. REC PAUSE Button

Press this to pause during recording.

• CHANNEL Button

Press this to select a TV channel.

• TRK Button

Press this to remove the white line.

❚ Key Lock Function

If you do not want others to operate the DVD Recorder &

VCR (for example if you have programmed a timer recording)

you can set the equipment to lock out all button controls.

• Press and hold the INFO. button on the remote control for 5

seconds.

The display will show “SAFE” when the feature is activated.

• To resume normal mode, press and hold the INFO. button

again for 5 seconds.

7. F.ADV/SKIP Button

8. Playback-related Buttons

Forward/Rewind, Search, Skip, Stop, Play/Pause

9. TITLE LIST(DISC MENU) Button

Press this to enter the TITLE list/Disc menu.

10. MENU Button

Press this to bring up the DVD Recorder & VCR’s

setup menu.

“SAFE” will disappear and the DVD Recorder & VCR will

operate normally.

11. ENTER/DIRECTION Buttons

(UP/DOWN or LEFT/RIGHT Buttons)

This button functions as a toggle switch.

English - 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Overview

Connecting &

Setting Up

A Quick overview presented in this guide will give you

enough information to start using the recorder.

Step 1 : Unpacking

†

Step 2 : Connecting the Antenna Cable

†

Step 3 : Connecting the Video Cable

†

Step 4 : Connecting the Audio Cable

†

Step 5 : Connecting External Devices

†

Step 6 : Connecting the Power Cord

†

Step 7 : Preparing the Remote Control

Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Step 1 : Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Step 2 : Connecting the Antenna cable . . . . . . . . . . . . . . . . .15

Step 3 : Connecting the Video cable . . . . . . . . . . . . . . . . . . .16

Step 4 : Connecting the Audio cable . . . . . . . . . . . . . . . . . . .18

Step 5 : Connecting External Devices . . . . . . . . . . . . . . . . . .19

Step 6 : Connecting the Power Cord . . . . . . . . . . . . . . . . . . .20

Step 7 : Preparing the Remote Control . . . . . . . . . . . . . . . . .20

•

Note to CATV system installer : This reminder is

to call CATV system installer’s attention to Article 820-40

of the National Electrical Code (Section 54 of Canadian

Electrical Code, Part I), that provides guidelines for

proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding

system of the building as close to the point of cable title

as practical.

14 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Method1 : Antenna + DVD Recorder &

VCR + TV : No Cable box

Step 1: Unpacking

You can record non-scrambled channels by selecting the

channel on the DVD Recorder & VCR. Also use this

Method if you watch channels without a cable box.

Accessories

Check for the supplied accessories below.

• Video/Audio Cable (AC39-00073A)

• RF Cable for TV (AC39-42001J)

• Remote Control (AK59-00034H)

• Batteries for Remote Control (AAA Size)

(AC43-12002H)

• User’s Manual

• Quick Guide

Step 2: Connecting the

Antenna Cable

RF Cable

There are several ways to connect your DVD Recorder &

VCR. Select one of the following antenna connections

that best suits you below.

• Method 1 : Antenna + DVD Recorder & VCR + TV : No

Cable box

Method 2 : Antenna +Cable box +

DVD Recorder & VCR + TV : Cable box

with many scrambled channels

• Method 2 : Antenna +Cable box + DVD Recorder &

VCR + TV : Cable box with many scrambled

channels

You can record channels by selecting the channel on the

cable box. You cannot record one channel while watching

another channel. Be sure that the cable box is turned on.

• Method 3 : Antenna + DVD Recorder & VCR + Cable

box + TV : Cable box with a few scrambled

channels

Wall

■

If you are using an off-air antenna that has 300-

ohm twin flat leads, use an external antenna

Note

Cable box

connector (300-75 ohm adaptor : not supplied)

to connect the antenna to the DVD Recorder &

VCR.

To RF IN

■

If you have two separate antennas (one VHF

and the other UHF), use a UHF/VHF combiner-

adaptor (available at most electronics shops) to

connect the antenna to the DVD Recorder &

VCR.

To RF OUT

RF Cable

To ANT INPUT

English - 15

Download from Www.Somanuals.com. All Manuals Search And Download.

• Compared to standard interlaced video, progressive

scan doubles the amount of video lines fed to your TV,

resulting in a more stable, flicker-free, and clear image

than interlaced video. The progressive scan video out-

put jack is used in progressive output mode. This is

only available with TVs that support progressive scan.

• Consumers should note that not all high definition tele-

vision sets are fully compatible with this product and

may cause artifacts to be displayed in the picture. If

you experience 480 progressive scan picture prob-

lems, it is recommended that you switch the connec-

tion to the ‘standard definition’ output. If there are

questions regarding TV set compatibility with this

model, please contact our customer service center at

1-800-SAMSUNG.

Method 3 : Antenna + DVD Recorder &

VCR + Cable box +TV : Cable box with

a few scrambled channels

You can record non-scrambled channels by selecting the

channel on the cable box. You cannot record scrambled

channels that require a cable box.

Wall

Method 1 : Connecting to a video input jack

To RF IN

Connect a video(yellow) cable between the VIDEO OUT

jack (AV OUT) on DVD Recorder & VCR and VIDEO

(yellow) IN jack on the TV(or AV amplifier).

• You will enjoy regular quality images.

To RF OUT

• Connect audio cables (white and red) between the

AUDIO L, R OUT Jacks (AV OUT) on the DVD

Recorder & VCR and AUDIO IN jacks on TV (or AV

amplifier).

Cable box

RF Cable

To ANT INPUT

Step 3: Connecting the

Video Cable

There are several ways to connect your DVD Recorder

& VCR. Select one of the following video connecting

methods that best suits you below.

• Method 1 : Connecting to a Video input jack

• Method 2 : Connecting to an S-video input jack

• Method 3 : Connecting to Component video input

jacks (Y, P^B, PR

)

S-Video, Component video and Progressive

Output Modes

• S-Video and Component video output are available

only if your TV supports S-Video input or Component

video input, respectively. If S-Video or Component

video output does not work, check the TV connections

and the TV input selection settings.

16 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Method 2 : Connecting to an S-video

input jack

Connect an S-video cable(not included) between the

S-VIDEO OUT jack on DVD Recorder & VCR and

S-VIDEO IN jack on your TV (or AV amplifier).

•

You will enjoy high quality images. S-Video separates

the picture element into black and white (Y) and color

video input mode.

•

Connect audio cables(white and red) between the

AUDIO L, R OUT Jacks (AV OUT) on the DVD

Recorder & VCR and AUDIO IN jacks on TV(or AV

amplifier). (See pages 18 to 19)

COMPONENT

•

You will enjoy high quality accurate color reproduction

images. Component video separates the picture

element into black and White(Y), blue(P^B), red(PR

)

signals to present most clear and clean images.

INPUT

■

Make sure that the color coded connections

S-VIDEO

match. That is, the Y, P^Band PR component

output jacks of your DVD Recorder & VCR

should be connected to the exact correspond-

ing component input jacks on your TV.

Otherwise, red or blue images will be displayed

on the TV screen.

Note

■

Make sure that the left and right audio output

jacks of your DVD Recorder & VCR are con-

nected to the left and right audio input jacks of

your TV, respectively.(page 18)

Method 3 : Connecting to Component

video input jacks(Y,PB,PR)

Your TV must support progressive scan input to allow

you to watch progressive scan component video output.

1. Connect Component video cables(not included)

between the VIDEO OUT jacks (COMPONENT OUT)

on DVD Recorder & VCR and COMPONENT VIDEO

IN jacks on your TV (or AV amplifier).

2. Press the P.SCAN button on the front panel while the

unit is in Stop mode. The message [Press “Yes” to

confirm Progressive scan mode. Otherwise press

“No”.] will be displayed.

Press the œ √ buttons to select Yes, and then press

the ENTER button. Make sure that the disc has

stopped completely before changing the mode.

English - 17

Download from Www.Somanuals.com. All Manuals Search And Download.

Method 2 : Connecting to a stereo

amplifier with analog input jacks

Step 4 : Connecting the

Audio Cable

If your stereo amplifier only has audio input jacks

(L and R), use the analog audio out jacks on the

DVD Recorder & VCR.

There are several ways to connect your DVD Recorder

& VCR. Select the audio connection that best suits you

below.

• Method 1 : Connecting to your TV

• Method 2 : Connecting to a stereo amplifier (analog

audio out)

• Method 3 : Connecting to an AV amplifier with a digi-

tal input jack.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems, Inc.

Method 3 : Connecting to an AV ampli-

fier with the digital input jack

Method 1 : Connecting to your TV

If your TV has audio input jacks, use this connection.

If your AV amplifier has a Dolby Digital or DTS

decoder and a digital input jack, use this connection.

To enjoy Dolby Digital or DTS sound, you will need to

set up the audio settings. (See page 28)

18 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Method 2 : Connecting a Camcorder to

the AV IN 2 jacks

Step 5 : Connecting

External Devices

You can use the AV IN 2 jacks on the front panel

of the DVD Recorder & VCR. You can record from con-

nected as a camcorder.

When an input source is inserted into AV IN 2 while

viewing TV, the input will be switched to AV IN 2 auto-

matically.

This allows you to connect your DVD Recorder & VCR to

other external devices and view or record their outputs.

• Method 1 : Connecting a VCR, Set-Top Box(STB) or

DVD player to the AUDIO/VIDEO AV IN 1

jacks.

• Method 2 : Connecting a Camcorder to the AV IN 2 in

jacks.

• Method 3 : Connecting a Camcorder to the DV IN

jack.

Method 1 : Connecting a VCR,

Settop Box(STB) or DVD player to the

AUDIO/VIDEO AV IN 1 jacks

Connecting a VCR or external device to AV IN 1 jacks

of the DVD Recorder & VCR.

You can record from connected equipment (VCR, STB

or DVD).

Method 3 : Connecting a Camcorder to

the DV IN jack

If your camcorder has a DV output jack, connect it to

the DV input jack of your DVD Recorder & VCR.

■

You can also use the AV IN 2 jacks on the front

panel of the DVD Recorder & VCR.

Note

When the S-Video jack and Video jack are

both connected, the S-Video jack will have pri-

ority. Line Selection will be automatically done.

Copy protected content cannot be recorded.

■

English - 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 7 : Preparing the

Remote Control

Step 6 : Connecting

the Power Cord

After all connections are complete, plug the power cord

in the wall outlet.

Install Batteries in the Remote Control

• Open the battery cover on the back of the

remote control.

“Auto” appears in the front panel display. This

means that the current time is being set automati-

cally through the antenna under connection(Auto

Program). The setup may take several minutes.

• Insert two AAA batteries. Make sure that the polarities

(+ and -) are aligned correctly.

• Replace the battery cover.

If the remote control does not operate

properly:

• Check the polarity + - of the batteries (Dry-Cell)

When the DVD Recorder & VCR operates normally, the

current time is automatically set and displayed in the

front panel display.

• Check if the batteries are drained.

• Check if the remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local

environmental regulations. Do not put them in

the household trash.

20 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

To determine whether your television is

compatible, follow the instructions below.

Setting the Remote Control

You can control part of another manufacturer’s TV

functions with this remote control.

1. Switch your television on.

2. Point the remote control towards the television.

3. Press the TV button and enter the two-figure code

corresponding to the brand of your television, by

pressing the appropriate number button.

• Control function buttons involve : TV POWER,

CH/TRK (

), VOL

+/-, Direct number buttons,

TV MUTE, INPUT SEL.

Brand

Codes

Brand

Codes

SAMSUNG

DAEWOO

EMERSON

01,14,15,23,31

NEWSAN

NOBLEX

PANASONIC 12,24

GRADIENTE 30

RCA

07,29

05,20

02,16,22

HITACHI

JVC

SANYO

SHARP

SONY

06,08,18

LOEWE

TELEFUNKEN 26

MAGNAVOX 04

MITSUBISHI 13

TOSHIBA

ZENITH

Result: If your television is compatible with the remote

control, it will switch off.

It is now programmed to operate with the remote

control.

■

If several codes are indicated for your

television brand, try each one in turn until you

find one that works. If you replace the remote

control’s batteries, you must set the brand code

again.

Note

You can then control the television using the

following buttons.

Button

Function

TV POWER Used to switch the television on and off.

INPUT SEL. Used to select an external source.

VOL

Used to adjust the volume of the television.

Used to select the desired channel.

Used to toggle the sound on and off.

Used to input number directly.

CH/TRK

(

)

TV MUTE

0~9

100+

Used to select channels over 100.

ꢀ

The various functions may not necessarily work

on all televisions. If you encounter problems,

operate the television directly.

Note

English - 21

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Menu

Navigation

System Setup

The on-screen menus allow you to enable or disable

various functions on your DVD Recorder & VCR.

Use the following buttons to open and navigate through

the on-screen menus.

No Disc

Setup

Timer Rec.

Setup

System

√

Clock Set

Channel Set

Language

Audio

Video

Parental Control

MOVE

SELECT

RETURN

EXIT

MENU Button

Press this button on the remote control to open

the on-screen MENU. Press again to exit the

on-screen MENU.

…/†,œ /√ Buttons

Press these buttons on the remote control to

move the selection bar …/†,œ /√ to cycle through

the menu options.

ENTER Button

Press this button on the remote control to confirm

any new settings.

On-Screen Menu Navigation..............................................22

Auto Clock Set ..................................................................23

Manual Clock Set ..............................................................24

Channel Set .......................................................................25

Auto Channel Memory.......................................................25

Channel Add/Delete ..........................................................26

RF Output Channel............................................................26

Setting Up the Language Options .....................................27

Setting Up the Audio Options ...........................................28

Setting Up the Display (Video) Options ............................29

Setting Up the Parental Control ........................................30

VCR Setting ......................................................................31

Video Input .......................................................................32

Front Display ....................................................................33

DVD EP Mode Time .........................................................33

Automatic Chapter Creator...............................................34

RETURN Button

Press this button on the remote control to return to

the previous MENU screen displayed or to exit the

on-screen MENU.

22 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Auto Clock Set,

then press the ENTER or √ button.

Auto Clock Set

No Disc

Setup

Timer Rec.

Auto Clock Set

Clock Data CH

Time Zone

: Automatic

√

Daylight Saving

This menu is used to set the current time. You need to

set the time to use timer recording.

MOVE

SELECT

RETURN

EXIT

ꢀ

You must have the antenna connected to set

the Auto Clock. See pages 15~16 for Antenna

Connections.

Note

■

If your clock is set to the wrong time zone or

daylight saving, you can adjust these settings

without turning off the Auto Clock Set function.

ꢀ

The Clock will be automatically set when you

turn off the recorder.

Note

With the unit in Stop mode/No Disc mode, press

Press the …† buttons to select the sub menu

(Clock Data CH, Time Zone or Daylight Saving),

then press the ENTER or √ button.

the MENU button.

No Disc

Setup

Timer Rec.

Setup

System

√

Clock Set

Channel Set

Language

Audio

Clock Data CH

Video

Parental Control

Press the …† buttons to select a channel that

carries a time signal, then press the ENTER button.

Select Auto to set the channel automatically.

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Setup, then press

the ENTER or √ button.

No Disc

Setup

Clock Data CH

Auto

No Disc

Setup

Timer Rec.

Setup

Select channel :

Timer Rec.

System

√

Clock Set

Channel Set

Language

Audio

Video

MOVE

SELECT

RETURN

EXIT

Parental Control

MOVE

SELECT

RETURN

EXIT

Time Zone

Press the …† buttons to select Clock Set, then

Press the …† buttons to select the time zone of

your area, then press the ENTER or √ button.

Select Automatic to set the time zone automatically.

press the ENTER or √ button.

No Disc

Setup

Timer Rec.

Clock Set

Auto Clock Set

√

Manual Clock Set

No Disc

Setup

Auto Clock Set

Clock Data CH

Timer Rec. Time Zone

Daylight Saving

Automatic

Atlantic

Eastern

Central

Mountain

Pacific

MOVE

SELECT

RETURN

EXIT

Alaska

Hawaii

MOVE

SELECT

RETURN

EXIT

English - 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Clock Set, then

Daylight Saving

press the ENTER or √ button.

Press the …† buttons to select Automatic,

Yes or No, then press the ENTER or √ button.

Select Automatic to set the daylight saving

automatically.

No Disc

Setup

Timer Rec.

Clock Set

Auto Clock Set

√

Manual Clock Set

No Disc

Setup

Timer Rec.

Auto Clock Set

Clock Data CH

Time Zone

: Automatic

√

Daylight Saving

Automatic

Yes

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Manual Clock

Set, then press the ENTER or √ button.

No Disc

Setup

Timer Rec.

Manual Clock Set

Date (mm/dd/yy)

01 2005 SAT

Time

00 AM

Press numeric keys or …† keys.

If Auto Setup fails to set the DVD Recorder & VCR’s inter-

nal clock by locating a local TV station, follow these steps

to set the date and time manually.

MOVE

SELECT

RETURN

EXIT

For accurate Timer Recording, your DVD Recorder

Press the …†œ √ buttons to select the Current Date

and Current Time, then press the ENTER button.

When the current time is stored in memory and

then the set is powered off, the current time will

appear in the front panel display.

& VCR's internal clock must be set correctly.

Note

With the unit in Stop mode/No Disc mode, press

the MENU button.

…† : Sets the value

You can set the value using the number (0~9)

No Disc

Setup

System

√

Clock Set

Channel Set

Language

Audio

Timer Rec.

buttons.

œ √: Moves to items

Video

Parental Control

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Setup, then press

the ENTER or √ button.

No Disc

Setup

Timer Rec.

Setup

System

√

Clock Set

Channel Set

Language

Audio

Video

Parental Control

MOVE

SELECT

RETURN

EXIT

24 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Antenna/Cable

TV, then press the ENTER or √ button.

Channel Set

No Disc

Setup

Timer Rec.

Channel Set

Antenna/Cable TV

Auto Channel Memory

Channel Add/Delete

RF output Channel

Antenna

Cable TV

√

CH3

This feature allows you to manually set the DVD

Recorder & VCR’s tuner band to Antenna or Cable,

whichever you connected to the Antenna In jack during

initial setup.

MOVE

SELECT

RETURN

EXIT

• Use this setting only if Auto Setup detected the

incorrect tuner band, i.e. channels are coming in on

the wrong channel numbers.

Select the Antenna/Cable TV(Signal Source) that

matches the antenna connection you selected on

pages 15~16(method1, 2 and 3).

• Antenna - Select if the DVD Recorder & VCR is

connected to an indoor or outdoor VHF/UHF

Antenna(method1 and 3).

With the unit in Stop mode/No Disc mode, press

the MENU button.

• Cable TV - Select if the DVD Recorder & VCR is

connected to Cable TV(method 2).

No Disc

Setup

System

√

Clock Set

Channel Set

Language

Audio

Timer Rec.

Video

Parental Control

Auto Channel Memory

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Auto Channel Memory will automatically seek and store

all active channels in your area.

No Disc

Setup

Timer Rec.

Setup

System

√

Clock Set

Channel Set

Language

Audio

With the unit in Stop mode/No Disc mode, press

the MENU button.

Video

Parental Control

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Press the …† buttons to select Channel Set,

then press ENTER or √ button.

then press the ENTER or √ button.

No Disc

Setup

Timer Rec.

Channel Set

Antenna/Cable TV

Auto Channel Memory

Channel Add/Delete

RF output Channel

Cable TV

CH3

√

No Disc

Setup

Timer Rec.

Channel Set

Antenna/Cable TV

Auto Channel Memory

Channel Add/Delete

RF output Channel

Cable TV

CH3

√

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

English - 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Auto Channel

Press the …† buttons to select Channel

Memory, then press the ENTER or √ button.

Add/Delete, then press the ENTER or √ button.

No Disc

Setup

Timer Rec.

Channel Add/Delete

No Disc

Setup

Timer Rec.

Auto Channel Memory

Total channel numbers:

06/125

Saved channel : 05

Select channel :

Scanning...

Add

Delete

Stop

NUMBER

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

• The DVD Recorder & VCR will automatically

search for all available channels in the selected

tuner band. This procedure may take a few min-

utes to complete.

Press the …† or number buttons to select the

channels you want to add or delete on the Select

channel screen. Then, press the ENTER button.

• When finished, the lowest channel found will be

displayed.

• Using …† buttons for channel selection allows

the user to add/delete one channel at a time.

• Press ENTER button to stop or cancel scan-

ning.

• Using CH/TRK (

) buttons for channel

selection jumps to the next channel memorized

in Auto Channel Memory.

Press the œ √ buttons to select Add or Delete,

Channel Add/Delete

then press the ENTER button.

No Disc

Setup

Timer Rec.

Channel Add/Delete

Select channel :

Channel is added.

Add Delete

Use this feature if Auto Channel Memory missed a

channel that you would like to add and delete a channel

you wish to remove.

NUMBER

SELECT

RETURN

EXIT

With the unit in Stop mode/No Disc mode, press

the MENU button.

RF Output Channel

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Press the …† buttons to select Channel Set, then

When you connect the DVD Recorder & VCR to TV

with RF Antenna Cable, follow the steps below to set

the RF Output Channel.

press the ENTER or √ button.

No Disc

Setup

Timer Rec.

Channel Set

Antenna/Cable TV

Auto Channel Memory

Channel Add/Delete

RF output Channel

Cable TV

CH3

√

With the unit in Stop mode/No Disc mode, press

the MENU button.

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Setup, then press

the ENTER or √ button.

26 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Channel Set,

Press the …† buttons to select Setup, then press

then press ENTER or √ button.

the ENTER or √ button.

No Disc

Setup

Timer Rec.

Channel Set

No Disc

Setup

Timer Rec.

Setup

Antenna/Cable TV

Auto Channel Memory

Channel Add/Delete

RF output Channel

Cable TV

CH3

√

System

√

Clock Set

Channel Set

Language

Audio

Video

Parental Control

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select RF output

Press the …† buttons to select Language, then

press the ENTER or √ button.

Channel, then press the ENTER or √ button.

Language setup menu will be displayed.

No Disc

Setup

Timer Rec.

Channel Set

Antenna/Cable TV

Auto Channel Memory

Channel Add/Delete

RF output Channel

No Disc

Setup

Timer Rec.

Language

√

Audio

: Original

√

CH3

√

Subtitle

: Automatic

: English

CH3

CH4

Disc Menu

On-Screen Menu

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select CH3/CH4, then

press the ENTER or √ button.

Press the …† buttons to select the desired

language option, press the ENTER or √ button.

A message will appear on your TV.

When the message disappears, change your TV

to channel 3 or 4 to match the RF Output Channel

of the player.

No Disc

Setup

Timer Rec.

Language

Original

Audio

English

Subtitle

Français

Deutsch

Español

Italiano

Nederlands

Korean

Disc Menu

On-Screen Menu

MOVE

SELECT

RETURN

EXIT

Setting Up the

Language Options

• Audio : For the disc audio language.

• Subtitle : For the disc subtitles.

• Disc Menu: For the disc menu contained on the

disc.

• On-Screen Menu: For the on-screen menu of

your DVD Recorder & VCR.

If you set audio, subtitle, disc menu and on-screen

menu language in advance, they will come up

automatically every time you watch a movie.

If the selected language is not recorded on the disc,

the original pre-recorded language is selected.

Press the …† buttons to select the desired

language, then press the ENTER or √ button.

With the unit in Stop mode/No Disc mode, press

■

Press the RETURN or œ button to return to the

previous menu. Press the MENU button to exit the

menu.

the MENU button.

Note

The selected language will only appear if it is

supported on the disc.

English - 27

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Output

Setting Up the Audio

Options

1. PCM :

Converts to PCM(2CH) 48kHz

audio. Select PCM when using the

Analog Audio Outputs.

2. Bitstream : Converts to Dolby Digital Bitstream

(5.1CH). Select Bitstream when

using the Digital Audio Outputs.

Allows you to setup the audio device and sound staus

settings depending on the audio system in use.

ꢀ

Be sure to select the correct Digital Output or

no audio will be heard.

Note

With the unit in Stop mode/No Disc mode, press

the MENU button.

DTS

Press the …† buttons to select Setup, then press

1. Off : Doesn’t output digital signal.

2. On : Outputs DTS Bitstream via digital output

only. Select DTS when connecting to a DTS

Decoder.

the ENTER or √ button.

No Disc

Setup

Timer Rec.

Setup

System

√

Clock Set

Channel Set

Language

Audio

ꢀ

When DTS soundtrack is played, sound is not

output from Analog Audio Output.

Note

Video

Parental Control

MOVE

SELECT

RETURN

EXIT

Dynamic Compression

This is only active when a Dolby Digital signal is

detected.

Press the …† buttons to select Audio, then press

the ENTER or √ button.

Audio setup menu will be displayed.

1. Off : You can enjoy the movie with the standard

Dynamic Range.

No Disc

Setup

Timer Rec.

Audio

2. On : When the Movie soundtracks are played at

low volume or from smaller speakers, the

system can apply appropriate compression to

make low-level content more intelligible and

prevent dramatic passages from getting too

loud.

Digital Output

DTS

: PCM

: Off

√

Dynamic Compression

: On

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the desired audio

Note

option, then press the ENTER or √ button.

Press the …† buttons to select the desired item,

then press the ENTER or √ button.

■

Press the RETURN or œ button to return to the

previous menu.

Press the MENU button to exit the menu.

28 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Aspect

Setting Up the

Depending on the type of television you have, you

may want to adjust the screen setting. (aspect ratio)

Display(Video) Options

• 4:3 Letter Box : Select when you want to see the

total 16:9 ratio screen DVD sup-

plies, even though you have a

TV with a 4:3 ratio screen. Black

bars will appear at the top and

bottom of the screen.

This function allows you to setup the TV screen

settings.

• 4:3 Pan - Scan : Select this for a conventional

size TV when you want to see

the central portion of the 16:9

screen. (Extreme left and right

side of movie picture will be cut

off.)

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

• 16:9 Wide : You can view the full 16:9 picture on

your widescreen TV.

No Disc

Setup

Timer Rec.

Setup

System

√

Clock Set

Channel Set

Language

Audio

Input Level

Adjusts the level of the input signal.

Video

Parental Control

• Darker : If you feel the screen is too light

and you want to make the sceen

darker.

MOVE

SELECT

RETURN

EXIT

• Lighter : If you feel the screen is too dark

and you want to make the sceen

lighter.

Press the …† buttons to select Video, then press

the ENTER or √ button.

Video option menu will be displayed.

No Disc

Setup

Timer Rec.

Video

Black Level

TV Aspect

Input Level

Black Level

: 16:9 Wide

√

: Darker

: 7.5 IRE

Adjusts the black level of the screen.

3D Noise Reduction : Off

• 0 IRE : This is the standard NTSC reference black

level for consistent brightness/

contrast across all sources.

MOVE

SELECT

RETURN

EXIT

Select this when you want darker screen.

• 7.5 IRE : This will enhance the black level for

increased brightness/contrast when

viewing DVDs.

Press the …† buttons to select the desired video

option, then press the ENTER or √ button.

Select this when you want lighter screen.

3D Noise Reduction

Press the …† buttons to select the desired item,

then press the ENTER or √ button.

• Off : Normal

• On : Select to remove noise from the screen.

ꢀ

Press the RETURN or œ button to return to the

previous menu. Press the MENU button to exit

Note

ꢀ

This function depends on disc type. It may not

work for some disc types.

the menu

Note

IRE: Short for the Institute of Radio Engineers. An

IRE unit is a relative unit of measure equal-

ing 1/140th of the peak-to peak (p-p) video

amplitude.

English - 29

Download from Www.Somanuals.com. All Manuals Search And Download.

The Re-enter Password screen appears to confirm

the password. Enter your password again, and

then press the ENTER or √ button.

Setting Up the Parental

Control

No Disc

Setup

Timer Rec.

Parental Control

Password

Off

The Parental Control function works in conjunction with

DVDs that have been assigned a rating - which helps

you control the types of DVDs that your family watches.

There are up to 8 rating levels on a disc.

MOVE

SELECT

RETURN

EXIT

With the unit in Stop mode/No Disc mode, press

Press the …† buttons to select On, then press

the ENTER or √ button.

the MENU button on the remote control.

The Parental Control screen appears.

Press the …† buttons to select Setup, then press

ꢀ

Press the RETURN or œ button to return to the

previous menu. Press the MENU button to exit the

menu.

the ENTER or √ button.

Note

No Disc

Setup

Timer Rec.

Setup

Refer to Troubleshooting if you forget your pass-

word. (See page 83)

System

√

Clock Set

Channel Set

Language

Audio

About the Rating Level

Video

Parental Control

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Rating Level,

then press the ENTER or √ button.

No Disc

Setup

Timer Rec.

Parental Control

Press the …† buttons to select Parental Control,

Password

: On

: Level 1 kids

√

then press the ENTER or √ button.

Rating Level

Change password

No Disc

Setup

Timer Rec.

Parental Control

Create the password

MOVE

SELECT

RETURN

EXIT

No Disc

Setup

Parental Control

Password

Level 8 Adults

Level 7

NUMBER

SELECT

RETURN

EXIT

Rating Level

Change password

Timer Rec.

Level 6

Level 5

Level 4

Level 3

Create a 4-digit password using the 0 to 9 buttons

on the remote control.

Level 2

Level 1 Kids

MOVE

SELECT

RETURN

EXIT

No Disc

Setup

Timer Rec.

Parental Control

Press the …† buttons to select the rating level

you want, then press the ENTER or √ button.

For example, if you select up to Level 6, discs that

contain Level 7, 8 will not play. A larger number

indicates that the program is intended for adult

use only.

Confirm the password

NUMBER

SELECT

RETURN

EXIT

30 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

About the Change Password

VCR Setting

Press the …† buttons to select Change Password,

then press the ENTER or √ button.

No Disc

Setup

Timer Rec.

Parental Control

If you want your videotapes to play automatically when

you insert them, turn on Auto Play.

Password

: On

: Level 1 kids

√

Rating Level

Change password

ꢀ

Only tapes that are missing the Record Safety

Tab will play automatically when inserted.

Note

MOVE

SELECT

RETURN

EXIT

With the unit in Stop mode/No Disc mode, press

No Disc

Setup

Change Password

the MENU button.

Timer Rec.

Enter the password

Press the …† buttons to select Setup, then press

the ENTER or √ button.

No Disc

Setup

Timer Rec.

Setup

NUMBER

SELECT

RETURN

EXIT

System

√

Clock Set

Channel Set

Language

Audio

Enter the 4-digit password using the 0 to 9 buttons

on the remote control.

Video

Parental Control

The ‘Confirm the password.’ message will be dis-

played.

MOVE

SELECT

RETURN

EXIT

No Disc

Setup

Timer Rec.

Change Password

Press the …† buttons to select System, then

press the ENTER or √ button.

Confirm the password

No Disc

Setup

Timer Rec.

System

VCR

√

Video Input

: AV 1

Front Display

DVD EP Mode Time

Chapter Creator

: Auto Dim

: 6Hours

: Off

√

NUMBER

SELECT

RETURN

EXIT

√

Enter your password again using the 0 to 9 buttons

on the remote control.

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select VCR, then press

ꢀ

Press the RETURN or œ button to return to the

previous menu.

the ENTER or √ button.

Note

Press the MENU button to exit the menu.

No Disc

Setup

Timer Rec.

VCR

Tape Length

Auto Play

:T120

: On

√

Auto Repeat

: Off

MOVE

SELECT

RETURN

EXIT

English - 31

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select the desired VCR

option, then press the ENTER or √ button.

Video Input

Press the …† buttons to select the desired item,

then press the ENTER or √ button.

If you watch video through AV IN 1, you can choose

AV 1(Composite) or S-video.

Tape Length

This information is usually printed on the tape box.

The menu cycles through: T-120, T-160 or T-180.

Once the type of cassette is set, the VCR can dis-

play the amount of time remaining on the tape when

you press the INFO. button.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the …† buttons to select Setup, then press

No Disc

Setup

VCR

the ENTER or √ button.

T-120

Tape Length

Auto Play

: T-120

√

T-160

: On

Timer Rec.

T-180

: Off

Auto Repeat

No Disc

Setup

Timer Rec.

Setup

System

√

Clock Set

Channel Set

Language

Audio

MOVE

SELECT

RETURN

EXIT

Video

Parental Control

MOVE

SELECT

RETURN

EXIT

Auto Play

• Off - Auto play is disabled.

Press the …† buttons to select System, then

• On - The VCR will automatically begin playing a

video tape when it is inserted, as long as the

safety tab of the cassette has been removed.

press the ENTER or √ button.

No Disc

Setup

Timer Rec.

System

No Disc

Setup

Timer Rec.

VCR

√

Video Input

: AV 1

Tape Length

Auto Play

: T-120

√

Front Display

DVD EP Mode Time

Chapter Creator

: Auto Dim

: 6Hours

: Off

√

: On

√

Off

Auto Repeat

: OOffn

√

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Video Input, then

press the ENTER or √button.

Auto Repeat

No Disc

Setup

Timer Rec.

System

It sets the VCR to play a tape repeatedly (unless a

tape control is activated :Stop, Fast Forward or

Rewind).

VCR

Video Input

Front Display

DVD EP Mode Time

Chapter Creator

AV 1

S-Video

: 6Hours

: Off

√

No Disc

Setup

Timer Rec.

VCR

√

Tape Length

Auto Play

: T-120

: On

√

Auto Repeat

: Off

Off

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select AV 1 or

MOVE

SELECT

RETURN

EXIT

S-Video, then press the ENTER or √ button.

32 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Display

DVD EP Mode Time

Adjust the brightness of the unit’s front display.

With the unit in Stop mode/No Disc mode, press

You can set the EP(Extended Play)mode’s time setting

to 6 or 8hours.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

No Disc

Setup

Timer Rec.

Setup

System

√

No Disc

Setup

Timer Rec.

Setup

Clock Set

Channel Set

Language

Audio

System

√

Clock Set

Channel Set

Language

Audio

Video

Parental Control

Video

MOVE

SELECT

RETURN

EXIT

Parental Control

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select System, then

press the ENTER or √ button.

Press the …† buttons to select System, then

press the ENTER or √ button.

Press the …† buttons to select Front Display,

then press the ENTER or √ button.

Press the …† buttons to select DVD EP Mode

Time, then press the ENTER or √ button.

No Disc

Setup

Timer Rec.

System

VCR

√

No Disc

Setup

Timer Rec.

System

Video Input

Front Display

DVD EP Mode Time

Chapter Creator

: AV 1

VCR

√

Auto Dim

Bright

Video Input

Front Display

DVD EP Mode Time

Chapter Creator

: AV 1

Dim

: Off

: Auto Dim

6Hours

√

8Hours

: Off

√

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the desired item,

then press the ENTER or √ button.

Press the …† buttons to select 6 Hours or 8

Hours, then press the ENTER or √ button.

• Auto Dim – Front Display will dim automatically

during power off.

• Bright – Front Display will be bright all the

time.

• Dim –

Front Display will be dim all the time.

English - 33

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the REC button to start recording.

The message "Do you want to create the chapter

menu after this recording?" is displayed.

Automatic Chapter

Creator

This function only works with DVD-RW (Video mode)

and DVD-R discs.

A DVD-Video consists of ‘Titles’ and ‘Chapters’.

When you record one program, it makes one Title.

If you use this function, the Title will be divided into

Chapters.

Press the œ √ buttons to select Yes and press

the ENTER button and recording begins.

In XP and SP mode, you must record at least 5

minutes to create a chapter. In LP and EP mode,

15 minutes.

With the unit in Stop mode/No Disc mode, press

the MENU button.

Press the …† buttons to select Setup, then press

Press the STOP button to stop recording.

the ENTER or √ button.

DVD-RW(V)

Setup

Timer Rec.

Copy

10 ^{To display the created titles, finalize the disc}

(see page 79) and then press the TITLE MENU

button. The title menu will be displayed.

System

√

Clock Set

Channel Set

Language

Audio

Title List

Video

Disc Manager

Parental Control

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select System, then

press the ENTER or √ button.

Top

Press the …† buttons to select Chapter Creator,

11 ^{To display the created chapters, select the}

desired Title and then press the DISC MENU

then press the ENTER or √ button.

button. The chapter menu for the selected Title

will be displayed.

DVD-RW(V)

Setup

System

VCR

√

Video Input

Front Display

DVD EP Mode Time

Chapter Creator

: AV 1

Timer Rec.

Copy

CHAPTER

: Auto Dim

: 6Hours

√

Title List

: Off

Off

Disc Manager

MOVE

SELECT

RETURN

EXIT

Top

Press the …† buttons to select On, then press

the ENTER or √ button.

ꢀ

On DVD-RW discs, additional chapters and

titles can be added to a finalized disc by

unfinalizing and recording again.On DVD-R

discs, once finalized, no additional chapters or

titles can be recorded.

Press the MENU button to exit the menu.

Note

Set the recording speed by pressing the REC

SPEED button on the remote (see page 53 for

more information on recording speeds).

ꢀ

The Automatic Chapter Creator function does

not work during Timer Recording or when you

turn the power off.

CAUTION

DVD-R discs cannot be unfinalized.

34 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Playing

Playback

This section introduces basic functions of play-

back by disc type.

Read the following information before playing a disc.

Region code (DVD-Video only)

Both the DVD Recorder & VCR and the discs are

coded by region. These regional codes must

match in order for the disc to play. If the codes do

not match, the disc will not play. The Region

Number for this DVD Recorder & VCR is

described on the rear panel of the DVD Recorder

& VCR.

Dolby Digital

Stereo

DTS

Digital Audio

Disc types that can be played

NTSC broadcast sys-

tem in U.S.A, Canada,

Korea, Japan,etc.

MP3

Disc Types

Disc Logo Recorded content

Disc Shape

Max. Playing Time

Single sided(5”)

Double sided(5”)

Single sided(3.5”)

Double sided(3.5”)

Single sided(5”)

Single sided(3.5”)

Single sided(5”)

Single sided(3.5”)

Single sided(5”)

Single sided(3.5”)

240

480

DVD-VIDEO

AUDIO + VIDEO

160

AUDIO-CD

AUDIO

◆

DVD Playback

JPEG CD-R/RW

MP3 CD-R/RW

JPEG Images

MP3 Audio

Before Playing ...................................................................35

Playing a Disc ...................................................................36

Using the Disc Menu and Title Menu ...............................37

Using the Search & Skip Functions ..................................37

Slow Motion Play / Step Motion Play ...............................38

About ANYKEY .................................................................38

Repeat Play........................................................................39

Selecting the Subtitle & Audio Language.........................41

Changing the Camera Angle.............................................42

Zooming-In .......................................................................42

Using the Bookmarks .......................................................43

Using the Markers ...........................................................44

Playing back an Audio CD (CD-DA)................................45

Playing back an MP3 CD..................................................46

Play Option Mode..............................................................47

To Program Tracks ............................................................47

Playing a picture CD.........................................................48

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

2 (XP: Excellent Quality)

Single-sided

5” (4.7GB)

DVD-RAM

AUDIO + VIDEO

Double-sided 4 (SP: Standard Quality)

5” (9.4GB)

8 (LP: Long Playback)

12 or 16 (EP:Extended)

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

DVD-RW

DVD-R

AUDIO + VIDEO

5” (4.7GB)

Discs that cannot be played

• DVD-Video with a region number other than “1” or

“ALL”

◆

VCR Playback

• 3.9 GB DVD-R Disc for Authoring.

• DVD-RAM not recorded following the Video

Recording Standard

Playing the VCR................................................................49

Tracking.............................................................................49

Special VCR Playback Features........................................49

S-VHS Playback ...............................................................49

Variable Search System.....................................................50

• Unfinalized DVD-R,unfinalized DVD-RW(V mode)

• PAL discs

• DVD-ROM/DVD+RW/PD/MV-Disc/DiVX Video Disc, etc

•Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I

English - 35

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

This DVD Recorder & VCR can only operate

with discs that are compatible with DVD-RAM

Standard Version 2.0.

Press the OPEN/CLOSE button.

Note

Playback and/or recording may not work for

some types of discs, or when specific opera-

tions, such as angle change and aspect ratio

adjustment, are being performed. Information

about the discs is written in detail on the box.

Please refer to this if necessary.

Place a disc gently into the tray with the disc’s

label facing up.

Press OPEN/CLOSE button to close the disc tray.

• Your DVD Recorder & VCR closes the disc

tray and plays the disc automatically.

• The recorder does not play discs automatically

after the initial power on.

ꢀ

Do not allow the disc to become dirty or

scratched, fingerprints, dirt, dust, scratches or

deposits of cigarette smoke on the recording

surface may make it impossible to use the disc

for recording.

• When the recorder is powered on and a disc is

in the tray, the unit will be activated and wait in

stop status.

ꢀ

DVD-RAM/-RW/-R discs may not be able to

play on some DVD players, depending on the

player, disc and the condition of the recording.

Discs with PAL programs recorded on them

cannot be recorded using this product.

• Press the PLAY button to start playback.

• If you insert a MP3 Disc, your DVD Recorder &

VCR will display the file list on the screen and

start playing.

• If you insert a JPEG Disc, folders and a file list

are displayed.

• If you want the unit to play automatically when it

is powered on with a disc in the unit, power on

with the PLAY button.

Playing a Disc

Press the STOP button to stop playback.

ꢀ

When you stop disc play, the DVD Recorder &

VCR remembers where you stopped. When you

press PLAY button again, it will pick up where

you left off. (unless the disc is removed or the

DVD Recorder & VCR is unplugged, or if you

press the STOP button twice.) This function is

only applicable to DVD-VIDEO, DVD-RAM,

DVD-RW, DVD-R or Audio CDs (CD-DA).

Note

ꢀ

Do not move your DVD Recorder & VCR while

playing, as this may cause damage to the disc.

Make sure to press the OPEN/CLOSE button to

open or close the disc tray.

CAUTION

Do not push the disc tray while it is being

opened or closed, as this may cause a product

malfunction.

ꢀ

Do not place foreign materials on or in the disc

tray.

Some functions may perform differently or be

disabled depending on the disc type. If this

occurs, refer to the instructions written on the

disc case.

ꢀ

Be especially careful that children's fingers are

not caught between the disc tray and the tray

chassis when it closes.

After turning power on, it will take a few

seconds until the DVD Recorder & VCR oper-

ates.

36 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Search & Skip

Functions

Using the Disc Menu

and Title Menu

Some discs contains a dedicated menu system that

allows you to select special functions for title, chapters,

audio track, subtitles, film previews, information on char-

acters, etc.

Searching through a Chapter or Track

During the playback, press the SEARCH œœ or √√

button on the remote control. Each time you press

the SEARCH button, the playback speed will

change as follows.

For DVD-VIDEO disc

Press the DISC MENU button to enter the disc

DVD-VIDEO/

menu of the disc.

FF1/FR1

➝

FF5/FR5

FF2/FR2

➝

FF6/FR6

FF3/FR3

➝

DVD-RAM/DVD-RW

DVD-R

• Move to the setup menu related to playback opera-

tion.

FF4/FR4➝

➝

AUDIO CD(CD-DA)

• You can select audio language and subtitle etc.

provided by the disc.

➝FF1/FR1

➝FF2/FR2

➝

FF3/FR3

• You can scan the program in reverse order.

To return to normal speed playback, press the

√ll button.

Press the TITLE MENU button to move to the title

menu of the disc.

• Use this button if the disc contains more than one

title. Some discs may not support the title menu

functionality.

ꢀ

No sound is heard during Scan(Search) mode,

except CDs (CD-DA).

Note

For DVD-RAM/DVD-RW/DVD-R disc

Skipping Chapters or Tracks

Press the TITLE LIST button to display title list.

During the playback, press the

on the remote control.

lœœ or √√l button

ꢀ Title List : Title List shows a list to help you

select a title. Since the title list con-

• If you press the

œœ button

Note

sists of the information on video that

is actually recorded, if one title is

deleted, that title cannot be played

again.

If you press the œœ button, it moves to the begin-

ning of the chapter, track or marker(DVD-RAM,

DVD-RW(VR mode) ). Pressing the button once

again within 3 seconds returns to the beginning of

the previous chapter, track or marker(DVD-RAM,

DVD-RW(VR mode) ).

ꢀ Play List : This refers to a unit of playback,

which is made by selecting a

desired scene in the entire Title

List. When one playlist is played,

only the scene selected by the

user will play and then stop. Since

only the information necessary for

playing a desired scene is includ-

ed in a playlist, even if that playlist

is deleted, the original recording

will not be deleted.

• If you press the √√

button

If you press the √√ button, it moves to the next

chapter, track or marker(DVD-RAM, DVD-RW(VR

mode) )

Skipping ahead 30 seconds

During the playback, press F.ADV/SKIP button to

skip ahead exactly 30 seconds.

English - 37

Download from Www.Somanuals.com. All Manuals Search And Download.

Slow Motion Play/

Step Motion Play

About ANYKEY

The ANYKEY functions allows you to easily search for a

desired scene by accessing title, chapter, track and

time. You can also change the subtitle and audio set-

tings and set some features including Repeat, Angle

and Zoom.

Slow Motion Play (DVD-VIDEO / DVD-RAM

/ DVD-RW / DVD-R)

During pause mode, press the SEARCH œœ or √√

button on the remote control for more than 1 sec-

ond.

Moving to a scene directly using

the ANYKEY

• Each time you press the √√ button :

√ X 1/8 ➝

• Each time you press the œœ button :

X 1/8 ➝ œ X 1/4 ➝ œ X 1/2

To return to normal speed playback, press the

ll button.

√ X 1/4 ➝

l√ X 1/2

• If you want to move to a title, a chapter or a track

to find a desired scene.

√

Press the ANYKEY button during playback.

Step Motion Play (DVD-VIDEO/DVD-RAM /

DVD-RW / DVD-R)

DVD-VIDEO

1/10

1/40

00:01:45

ENG

Off

5.1CH

1/1

Off

During pause mode, press the F.ADV button on the

remote control.

MOVE

CHANGE

• Each time the button is pressed, a new frame will

appear.

To return to normal speed playback, press the

Press the …† buttons to select Title, Chapter or

√

ll button.

Track.

ꢀ

No sound is heard during STEP or SLOW

mode.

DVD-VIDEO

1/10

Note

1/40

00:01:45

ENG

Off

5.1CH

1/1

Off

MOVE

CHANGE

Press the œ √ buttons or number (0~9) buttons to

select the desired scene.

Then, press the ENTER button.

38 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

• If you want to move to a desired time to help you find

a scene.

Repeat Play

Press the ANYKEY button during playback.

DVD-VIDEO

1/10

Playing Repeatedly(Repeat Playback)

1/40

00:01:45

ENG

Off

5.1CH

1/1

Off

MOVE

CHANGE

Press the ANYKEY button during playback.

DVD-VIDEO

1/10

1/40

00:01:45

ENG

Off

Press the …† buttons to select Time.

5.1CH

DVD-VIDEO

1/10

1/1

Off

1/40

MOVE

CHANGE

00:01:45

ENG

Off

5.1CH

1/1

Off

Press the …† buttons to select Repeat.

MOVE

NUMBER

DVD-VIDEO

1/10

1/40

Enter the time in the sequence of hours, minutes,

and seconds using the number buttons, then

press the ENTER button.

00:01:45

ENG

Off

5.1CH

1/1

Off

MOVE

CHANGE

ꢀ

This may not work for some discs. When an

Audio CD(CD-DA) or a MP3 disc is inserted,

according to a disc type, the information dis-

play may not be appear.

Note

Select repeat mode using œ √ button.

ꢀ

The Time Search function does not operate

in some discs.

Press the ENTER button.

•

To make the screen disappear, press the

ANYKEY again.

ANYKEY or RETURN button.

ꢀ

DVD-RAM, DVD-RW(VR mode), unfinalized

DVD-R and unfinalized DVD-RW (Video

mode) do not repeat a chapter.

Note

English - 39

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Repeatedly(Repeat Playback)

Playing a Certain section Repeatedly(A-B

Repeat Playback)

Press the ANYKEY button during playback.

Repeat is highlighted.

DVD-VIDEO

1/10

Music

1/40

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

00:01:45

ENG

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

ENG

Off

5.1CH

1/1

01/12

Off

MOVE

CHANGE

MOVE

SELECT

RETURN

Press the …† buttons to select Repeat.

Press the …† buttons to select the Track or Disc

you want to play repeatedly. Press the ENTER

DVD-VIDEO

1/10

button.

1/40

For MP3 discs, you can select Track, Folder or

00:01:45

ENG

Disc.

ENG

Off

5.1CH

1/1

Off

- To return to normal playback -

MOVE

CHANGE

Press the CLEAR button to return to normal

playback.

Press the œ √ button to select A-B, then press the

ENTER button.

Press the ENTER button at the point where you want

the repeat play to start (A) and press it again at the

point where you want the repeat play to stop (B).

Repeat playback of the A-B section starts.

Repeat A-B

A-B

ꢀ

If you set point (B) before five seconds has

lapsed, the prohibition mark ( ) will appear.

You can also activate Normal Playback by

pressing the CLEAR button.

Note

CDs do not support the Repeat A-B function.

- To return to normal playback -

Press the CLEAR button to return to normal

playback.

40 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Subtitle, then

press the œ √ buttons to select the desired subti-

tle language.

Selecting the Subtitle &

Audio Language

DVD-VIDEO

1/10

1/40

00:01:45

ENG

Off

5.1CH

(VR mode)

1/1

Off

Selecting the SUBTITLE language

MOVE

CHANGE

Subtitle languages may not work depending on the

disc type. This is only available during playback.

ꢀ

The subtitle display may be different depend-

ing on the disc type.

Note

If the subtitles overlap, disable the caption

Using the SUBTITLE button

function on your TV

Some discs allow you to select the language

for the disc menu only.

Press the SUBTITLE button during playback.

Subtitle

ENG

Selecting the Audio language

Audio languages may not work depending on the

disc type. This is only available during playback.

Press the ANYKEY button during playback.

DVD-VIDEO

1/10

Press the …† buttons to select the desired subti-

tle language.

1/40

00:01:45

Off

•

To make the screen disappear, then press the

CLEAR or RETURN button.

ENG

Title

1/1

5.1CH

Off

MOVE

CHANGE

Using the ANYKEY button

Press the …† buttons to select Audio, then press

the œ √ buttons to select the desired audio lan-

guage.

Press the ANYKEY button during playback.

DVD-VIDEO

1/10

DVD-VIDEO

1/10

1/40

00:01:45

Off

1/40

00:01:45

ENG

Title

1/1

5.1CH

ENG

Off

5.1CH

Off

1/1

MOVE

CHANGE

Off

MOVE

CHANGE

ꢀ

Audio languages may be different because

they are disc-specific.

Note

Some discs allow you to select the audio

language for the disc menu only.

English - 41

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the Camera

Angle

Zooming-In

When a DVD Recorder & VCR contains multiple angles

of a particular scene, you can select the Angle function.

Press the ANYKEY button during playback.

DVD-VIDEO

1/10

Using the ANGLE button

1/40

00:01:45

ENG

Off

If the disc contains multiple angles, the ANGLE

5.1CH

appears on the screen.

1/1

Off

MOVE

CHANGE

Press the ANGLE button, then the ANGLE icon

will appear with the current angle number and the

number of angles available.

Press the …† buttons to select Zoom, then press

Press the …† button to select the desired angle.

the ENTER button. ( ) will be displayed.

Using the ANYKEY button

Press the ANYKEY button during playback.

DVD-VIDEO

1/10

1/40

00:01:45

Off

Press …†, œ √ buttons to move to the area you

ENG

Off

5.1CH

want to enlarge.

1/3

Off

MOVE

CHANGE

Press the ENTER button.

The screen will be enlarged to twice the normal

size. The screen size will be enlarged to four

times the normal size.

Press the …† buttons to select Angle, then press

the œ √ buttons or number (0~9) buttons to select

the desired angle scene.

DVD-VIDEO/

DVD-RAM/DVD-RW/

DVD-R

DVD-VIDEO

1/10

normal size ➝ 2X ➝ 4X ➝ 2X

➝ normal size

1/40

00:01:45

ENG

Off

5.1CH

1/3

Off

ꢀ

When recording is done in the EP mode, the

Zoom function will not be supported.

(except when the recording has been done

in V mode)

MOVE

CHANGE

Note

ꢀ

This function is disc-dependent, and may not

work all DVDs.

Note

This function does not work when a DVD has

not been recorded with a multi-camera angle

system.

42 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing back a Bookmark

Using the Bookmarks

Press the MARKER button.

Press the œ √ buttons to select a bookmarked

scene.

(V-mode)

Bookmark

Set marks at scenes you want to see again so that you

can start playback from the marked position.

Press the MARKER button during playback.

MOVE

PLAY

CANCEL

RETURN

Bookmark

Press the ENTER or √ll button to start playing

from the selected scene.

MOVE

SELECT

RETURN

Clearing a Bookmark

Press the ENTER button when the desired scene

appears.

Press the MARKER button.

• The number 1 is displayed and the scene is

memorized.

Press the œ √ buttons to select a bookmarked

Bookmark

scene.

Bookmark

MOVE

PLAY

CANCEL

RETURN

CANCEL

RETURN

MOVE

PLAY

Press the œ √ button to move to the next position.

Press the CLEAR button to delete the selected

bookmark.

Press the ENTER button again when the desired

scene appears.

Bookmark

• The number 2 is displayed and the scene is mem-

orized. Repeat above to bookmark other positions.

You can bookmark up to 10 scenes.

Bookmark

MOVE

SELECT

RETURN

MOVE

PLAY

CANCEL

RETURN

English - 43

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing back a Marker

Using the Markers

Press the MARKER button during playback.

Press the œ √ buttons to select a marked scene.

01 02

Marker

N:2

(VR mode)

Press the MARKER button during playback.

Marker

N:0

MOVE

PLAY

CANCEL

RETURN

SELECT

RETURN

Press the ENTER or √l l button to start playing

from the selected scene.

• If you press the NEXT SKIP (√√

)button or the

Press the ENTER button when the desired scene

PREVIOUS SKIP(œœ)button in marker mode,

appears.

and the next or current marked point plays for

shorter than three seconds, playback starts from

the previous marked point.

Marker

N:1

Clearing a Marker

MOVE

PLAY

CANCEL

RETURN

Press the MARKER button during playback.

• The number 01 is displayed and the scene is

memorized.

Press the œ √ button to move to the next posi-

Press the œ √ buttons to select a marked scene.

Press the CLEAR button to delete the selected

mark.

tion.

Press the ENTER button again when the desired

01 02 03 04 05 06 07 08 09 10 N:10

Marker

scene appears.

Marker

01 02

N:2

01 02 03 04 05 06 07 08 09

N:9

Marker

MOVE

PLAY

CANCEL

RETURN

• The number 02 is displayed and the scene is

memorized.

MOVE

PLAY

CANCEL

RETURN

• DVD-RAM or DVD-RW (VR Mode) discs have

the Marker function instead of the Bookmark

function. The Marker function allows you to mark

up to 99 scenes. Since the scenes may be dis-

played as many different pages, numbering is

necessary. If a disc in use is encoded with Disc

Protect, Markers cannot be set or deleted. Only

playback is available.

• When a marker is cleared while DVD-RAM/

DVD-RW(VR mode) is playing, marker numbers

will change. For example, if the 7th marker is

cleared after ten markers are registered, the

marker numbers after the eighth will automatical-

ly move ahead by one and the 8th marker

becomes the 7th.

44 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons on the Remote Control used

for CD playback

Playing back an Audio

CD (CD-DA)

Each disc has a variety of menu functions available.

Playing an Audio CD(CD-DA)

Insert an Audio CD (CD-DA) into the disc tray.

• The Audio CD menu appears and the tracks

(songs) are played automatically.

Music

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

01/12

MOVE

SELECT

Press the …† buttons to select the track (song) to

start playback from, and then press the ENTER

button.

• You can also select the track (song) by pressing

the number buttons on the remote.

1. …†, 0~9: Selects a track (song).

√

: Plays the selected track (song).

3. ENTER button: Plays the selected track (song).

4. √√l button: Plays the next track.

Audio CD(CD-DA) Screen Elements

5. lœœ button: Returns to the beginning of the current

track when pressed during playback. If pressed

again, your DVD Recorder & VCR moves to and

plays the previous track.

Music

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

If you press this button within three seconds after

playback starts, the previous track will be played.

If you press this button after three seconds, the

current track will be replayed from the beginning.

6. Press the (œœ /√√) button: Fast Play

(FF1/FR1, FF2/FR2, FF3/FR3)

01/12

MOVE

SELECT

1. Repeat mode: Repeat off/Repeat Track/Repeat Disc.

7. ■ : Stops a track(song).

8. √ll : Plays a track(song) or pauses playback.

9. ANYKEY : To select the top menu on screen display

(Repeat or Play Option).

2. Current track (song): Displays the number of the track

currently being played.

3. Displays the current play index and total track number.

4. This shows the operating state of a disc and a playback

time corresponding to a portion that is currently played.

5. Displays the track list (song list) and the playing time of

each track.

6. Button display.

7. Play Option: Normal, Random, Intro or Playlist

English - 45

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing back an MP3 Disc

Playing back an MP3 CD

Playing an MP3 Disc

Insert an MP3 CD into the disc tray.

• The MP3 menu is displayed and the tracks

(songs) are played automatically.

Music

MP3

Repeat : Off

Play Option : Normal

00 :22

Straight from the heart

ROOT

Bryan Adams

Bryan Adams_2

Straight from the heart

Run to you

ROOT

03/06

Heaven

MOVE

SELECT

RETURN

Press the …† buttons to select the folder you

want to hear, and then press the ENTER button.

• Press the …† buttons to select the track (song)

you want to hear, and then press the ENTER

button.

• You can also select the desired track (song) by

pressing the number buttons on the remote.

1. …†, 0~9: Selects a track (song).

√

: Plays the selected track (song).

3. ENTER button: Plays the selected track (song) or

displays the files in the selected folder.

4. RETURN button: Moves to the folder to which the

current song belongs.

MP3 Screen Elements

5. √√

button: Plays the next track.

Music

MP3

6. œœ button: Returns to the beginning of the current

Repeat : Off

Play Option : Normal

00 :22

track when pressed during playback. If pressed

again, your DVD Recorder & VCR moves to and

plays the previous track.

Straight from the heart

ROOT

Bryan Adams

Bryan Adams_2

Straight from the heart

Run to you

If you press this button within three seconds after

playback starts, the previous track will be played.

If you press this button after three seconds, the

current track will be replayed from the beginning.

ROOT

03/06

Heaven

MOVE

SELECT

RETURN

7. ■ : Stops a track(song).

8. √ll : Plays a track(song) or pauses playback.

9. ANYKEY : To select the top menu on screen display

(Repeat or Play Option).

1. Repeat mode: Repeat off, Repeat Track, Repeat

Folder or Repeat Disc

2. Current track (song): Displays the name of the track

being played.

3. Displays the current folder and play index.

4. This shows the operating state of a disc and a play-

back time corresponding to a portion that is currently

played.

5. Displays the information for the folder and its tracks.

6. Button display.

7. Play Option : Normal, Random, Intro or Playlist

46 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

To Program Tracks

Play Option Mode

You can register a maximum 30 tracks in the playlist.

The Play Option can be used with an Audio CD or MP3

in the Play or Stop mode.

Press the ANYKEY button during playback.

Repeat mode will be highlighted.

Press the ANYKEY button during playback.

• During Stop, Play option will be highlighted.

Repeat mode will be highlighted.

Music

Press the œ √ buttons to select Play Option.

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

Press the …† buttons to select Playlist, then

press the ENTER button.

01/12

Playlist screen is displayed.

Music

MOVE

SELECT

RETURN

Repeat : Off

Play Option : Playlist

00 : 00

• During Stop, Play option will be highlighted.

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

Press the œ √ buttons to select Play Option.

Music

MOVE

SELECT

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

Press the …† buttons to select tracks in the order

in which you want them to play, then press the

ENTER button.

01/12

Music

RETURN

MOVE

SELECT

Repeat : Off

Play Option : Playlist

00 : 00

01. TRACK 1

1. P_TRACK 1

2. P_TRACK 2

3. P_TRACK 3

4. P_TRACK 4

Press the …† buttons to select a desired track,

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

then press the ENTER button.

• Normal: Tracks on a disc are played in the

order in which they were recorded on the disc.

• Random: The Random option plays a disc’s

tracks in random order. After a random list is

generated and played completely, another

random list is generated and played.

Random Play is continued until the play option

is changed.

MOVE

SELECT

If you playlisted a wrong track, press the √ button,

then press the …† buttons to select wrong track.

Press the CLEAR button. The wrong track will be

removed.

• Intro: The first 10 seconds of each track will be

played.If you want to listen to the music that you

have selected, press the ENTER button or √ll

button. The play option will be changed to

Normal Play. When Intro Play is completed,

Normal Play is performed.

Music

Repeat : Off

P_TRACK 1

Play Option : Playlist

01 : 36

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

1. P_TRACK 1

2. P_TRACK 2

3. P_TRACK 3

• Playlist: The Playlist playback option allows you

to select the order in which you want tracks to

play.

MOVE

SELECT

CANCEL

Press the PLAY button to playback the playlist.

English - 47

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† œ √ buttons to select a picture.

Playing a picture CD

Photo

JPEG

Index

Slide Show

ROOT / DSC01189

Page

SELECT

MOVE

RETURN

There are two types of Picture CDs. One is a CD

with only JPEG files. The other one is a CD with

JPEG files and MP3 files.(mixed CD)

• To see the next 6 pictures, press the √√l button.

• To see the previous 6 pictures, press the œœ button.

1. When a mixed CD is played, a menu will be

shown in order to let you choose which con-

tents, either JPEG or MP3, you want to play.

If you press the √l l button, the Slide show

screen will appear.

4^-1

1-1. If you want to play MP3 files on a mixed CD,

choose Music on the menu, then it will take

you to the MP3 play back screen.

Press the œ √ buttons to set the slide show

speed, then press the ENTER button.

1-2. If you want to play JPEG files on a mixed

CD, choose Photo on the menu, then it will

take you

Slide Show Speed

to photo playback screen. See number 3 on

this page.

DSC01189

MOVE

2. When a Picture CD(CD with only JPEG files) is

played, the recorder will show the Album

screen,with thumbnail images. See number 3

on this page.

SELECT

RETURN

Press the œ √ buttons to select a picture file in

Album screen and then press the ENTER

button.

4^-2

Insert a Picture CD(JPEG only) or Mixed

CD(JPEG + MP3)into the disc tray.

When playing a Mixed CD, press the …† buttons

to select Photo, then press the ENTER or √ but-

ton. (when playing a Picture CD, see number 3 on

this page.)

DSC01189

MOVE

PHOTO

SELECT

RETURN

Photo

JPEG+MP3

Setup

: Returns to the Album screen.

Timer Rec.

Photo

Press [ENTER] or Right button :

Photo

: The unit enters slide show mode.

Before the slide show can begin, the picture

interval (Slide show speed) must be set.

: Each time the ENTER button is pressed, the

picture rotates 90 degrees clockwise.

: Each time the ENTER button is pressed, the

picture is enlarged up to 4X(four times the

normal size).

Music

MOVE

SELECT

RETURN

EXIT

Normal

➝

Normal

• Press the ANYKEY button to display menu bar.

• Press the RETURN button to clear the menu bar.

48 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing the VCR

Special VCR Playback

Features

While a videotape is playing, you can enjoy a variety of

special playback features, including Still, Frame

Advance, Skip, Slow motion, and more.

To play a standard VHS tape, just insert it into the VCR

deck and press the PLAY button. You can turn on the

Auto Play to enable the VCR deck to play automatically

when you insert a videotape that is missing the Record

Safety Tab.

Pause

In Play mode, press √II(PLAY/PAUSE)button to still

a single frame.

Frame Advance

In the pause mode, press F.ADV/SKIP button to

advance to the next frame.

Fps/Review

Insert a standard VHS tape into the VCR deck.

In Play mode, press Forward (√√)button or Rewind

(œœ)button to Cue/review at two speeds:

• When a tape is inserted, power will turn on auto-

matically.

• Picture Search - Press and release to advance the

tape forward or backward at 5 times normal speed.

• Jet Search - Press and hold to advance the tape

forward or backward at 7 times normal speed.

Press the √II(PLAY/PAUSE) button on the

remote control or on the front panel of the unit.

The videotape will begin to play automatically if

the Record Safety Tab is removed and Auto Play

is turned on.

Skip

In Play mode, press F.ADV/SKIP button to cue

ahead exactly 30 seconds. Press F.ADV/SKIP button

repeatedly up to 4 times to cue ahead 2 minutes.

Press the

ꢀ(STOP) button on the remote control

Slow motion

or on the front panel of the unit.

In pause mode, press √√ button for slow motion.

Press the √√ button repeatedly to vary slow motion

speed from 1/5 to 1/30 of normal playback. Press

the PLAY button twice to resume normal viewing.

Tracking

S-VHS Playback

The Tracking adjustment removes the white lines that

sometimes appear during playback because of slight

differences in recording decks. The CH/TRK (

)

button will automatically align the recorded tracks with

the playback heads to solve this problem. You may also

set tracking manually.

The DVD Recorder & VCR allows you to playback high

quality S-VHS tapes.

Insert an S-VHS tape into the VCR deck.

Adjust Tracking Manually

During playback, press the CH/TRK (

)

Press √II(PLAY/PAUSE)button on the remote

control or on the front panel to begin playback of

the S-VHS tape.

buttons to remove white lines from the picture.

English - 49

Download from Www.Somanuals.com. All Manuals Search And Download.

While a cassette is stopped, press the ANYKEY

button.

Variable Search

System

Each time you record a cassette on this DVD Recorder

& VCR, an “index” is automatically marked on the tape

when recording starts.The Search function allows you to

fast-forward or rewind to a specific index and start play-

back from that point. Depending on the direction select-

ed, the indexes are numbered as follows

VCR

Go To Zero

End Search

Forward Intro Scan

Reverse Intro Scan

MOVE

SELECT

Press the …† buttons to select End Search, then

press the ENTER button.

• This DVD Recorder & VCR uses a standard indexing

system (VISS). As a result, it will recognize any index-

es marked by other VCRs using the same system and

vice versa.

The VCR will fast forward, searching for a blank

position, and then automatically stop at that posi-

tion. If the VCR reaches the end of the tape during

end search, the tape will be ejected.

Go To [0:00:00] Stop

Use this feature when you want to search for the

0:00:00 counter position on a cassette.

End Search

√√

0 : 00 : 03

Press the CLEAR button at the point on the tape

where you want to set the counter to 0:00:00.

While a cassette is stopped, press the ANYKEY

Forward/Backward Intro Scan

Use scan and play when you don’t know exactly

button.

VCR

where a program is located on a cassette tape.

Go To Zero

End Search

Forward Intro Scan

Reverse Intro Scan

While a cassette is stopped, press the ANYKEY

button.

MOVE

SELECT

VCR

Go To Zero

End Search

Forward Intro Scan

Reverse Intro Scan

MOVE

SELECT

Press the …† buttons to select Go To Zero, then

press the ENTER button.

The VCR will rewind or fast forward, searching for

the 0:00:00 counter position, and then automati-

cally stop at that position.

Press the …† buttons to select Forward Intro

Scan or Backward Intro Scan, then press the

ENTER button. When an Index mark is found, the

DVD Recorder & VCR will playback the tape for 5

seconds, after which it will continue searching for

the next Index mark.

Go To Zero

œœ

0 : 00 : 03

Scan and Play

√√

0 : 00 : 23

End Search

Use this feature when you want to search for a blank

position to record a program on a cassette.

50 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Recording

Recording

This unit can record on various types of discs. Before

recording, read the following instructions and select the

disc type according to your preference.

Recordable discs

This section shows various DVD recording

methods.

This recorder can record on the following discs.

DVD-RAM

DVD-RW

DVD-R

•DVD-RWs and DVD-RAMs are rewritable.

•DVD-Rs are non-rewritable.

Compatibility between Samsung and

Other Company’s Recorder.

Disc Types

Recording

format

Recording Device Finalizing Additional Recording

in Samsung Recorder

Samsung

Recordable

DVD-RAM

VR Mode

Other Company

finalized

not finalized

finalized

Not recordable

Recordable

Samsung

Not recordable

Recordable

Other Company

ꢁ DVD Recording

DVD-RW

DVD-R

not finalized

finalized

Before Recording ...............................................................51

Recordable discs ...............................................................51

Recording Formats ...........................................................52

Recording Mode................................................................52

Unrecordable video ..........................................................52

Recording the current channel you are watching .............53

Recording From External Devices.....................................54

Recording through a DV Input jack...................................54

Making a One Touch Recording(OTR) ..............................55

Making a Timer Recording ................................................55

Editing the Scheduled Record List.....................................57

Deleting a the Scheduled Record List................................58

Not recordable

Recordable

Samsung

not finalized

V Mode

Not recordable

finalized

not finalized

finalized

Other Company

Samsung

Not recordable

Recordable

not finalized

Not recordable

finalized

Other Company

Not recordable

not finalized

■

Finalize

- This closes the DVD-RW/-R so no additional

recording can be done.

Note

■

Unfinalize

- This allows additional recording on a DVD-

RW disc originally recorded on the DVD-

VR320.

- A DVD-RW disc that has been recorded by

DAO(Disc At Once) in a PC cannot be unfi-

nalized.

ꢁ VCR Recording

Basic VCR Recording.........................................................59

Check Remaining Time ....................................................59

Special Recording Features ..............................................60

Copy to DVD or VCR........................................................61

- A DVD-RW disc that has been recorded

in Video Mode of a different maker’s

recorder cannot be unfinalized.

- A DVD-R disc cannot be unfinalized.

English - 51

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Formats

Recording Mode

When you insert an unused disc, the following message

appears. Since available functions differ depending on

the disc type, select a disc that best fits your prefer-

ences.

Select one of four recording modes by pressing the

REC SPEED button repeatedly while the unit is in Stop

mode for the desired recording time and picture quality.

In general, picture quality improves as the recording

time decreases.

DVD-RAM: Use after formatting the disc.

In AUTO Mode, picture quality is adjusted automatically

so that all images for the scheduled time can be

recorded onto the free disc space.

Unformatted Disc

Mode

Characteristic

Recording Times

Data Rates

Do you want to format this disc?

Yes

Select when the

Approx. 1 hours

about 8 Mbps

(high quality mode) video quality is

important.

Select to record in

Approx. 2 hours

about 4 Mbps

(standard quality mode) standard quality.

DVD-RW: When an unused DVD-RW disc is first insert-

ed, the message "Do you want to intialize this

disc" will be displayed. If you select Yes, the

disc will be formatted in VR mode.

Select when a long

recording time is

required.

Approx. 4 hours

about 2 Mbps

(long recording mode)

Select when a long

recording time is

required.

Approx. 6 hours/

about 1.2 Mbps

(extended mode)

Approx. 8 hours

about 0.8 Mbps

AUTO

for timer recording only

see page 56.

Approx 60 to 480 Min

approx 0.8 to 8Mbps

Uninitialized Disc

Do you want to initialize this disc?

Yes

Unrecordable video

Pictures with copy protection cannot be recorded on this

DVD Recorder & VCR.

If you want to change the mode, refer to

Formatting a Disc on page 78.

When the DVD Recorder & VCR receives a copy guard

signal while recording, recording stops and the following

message appears on the screen.

Disc Manager

DVD-RW(VR)

Setup

Disc Name

√

Timer Rec.

Copy

Disc Protection

Disc Format

: Not Protected

√

Choose the recording format fot DVD-RW.

Delete All Title Lists

Title List

DVD-VR

Cartridge Protect Inf

DVD-V

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

You cannot record copy protected movie.

DVD-R: Formatting DVD is unnecessary and only

Video Mode Recording is supported.

DVD-RW(Video mode)/-R

• Chapters will be created automatically when you final-

ize recording on DVD-R/DVD-RW discs in Video mode

with the Chapter Creator has been set to On.

• Simple editing (erasing titles/changing title name).

DVD-RW(VR mode)/-RW

• This mode involves multiple editing functions (such as

deletion of the whole title, partial deletion of a title,

etc.).

• Various editing options using a created Playlist.

52 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the CH/TRK (

) buttons or number

Concerning Copy Control Signals

buttons to select the channel you want to record.

TV broadcasts that contain copy control signals may have

one of the following three signal types, Copy-Free, Copy-

Once and Copy-Never. If you want to record a copy-once

type program, use DVD-RW with CPRM in VR Mode and

DVD-RAM.

Press the REC SPEED button repeatedly, to select the

recording speed (quality).

• XP(High, approx. 1 hour)

approx. 2 hours) LP(Low, approx. 4 hours)

EP(Extended Play, approx. 6 hours/8hours)

➝

SP(Standard,

➝

Copy-Free

Copy-Once

Copy-Never

➝

DVD-RW(Ver.1.1)

with CPRM

CH 11

VR mode

Recordable Time 02:08

Video mode

DVD-R

DVD-RAM(Ver.2.0)

Once “Copy Once” has been recorded, additional recording

cannot be performed.

This * marked parts are compatible with CPRM.

- Content Protection for Recordable Media (CPRM)

Press the REC button.

• “ ” is displayed on the screen and recording

begins.

CPRM is a mechanism that ties a recording to the

media on which it is recorded. It is supported by some

DVD recorders, but not by many DVD players. Each

blank recordable DVD has a unique 64-bit media ID

etched in the BCA. When protected content is recorded

onto the disc, it can be encrypted with a 56-bit C2

(Cryptomeria) cipher derived from the media ID.

During playback, the ID is read from the BCA and used

to generate a key to decrypt the contents of the disc.

If the contents of the disc are copied to other media, the

ID will be absent or wrong and the data will not be

decryptable.

ꢀ

Press the STOP button to stop or finish a recording

in progress.

• The message “Updating the information of disc.

Please wait for a moment” is displayed.

Pausing / Resuming

• Press the REC PAUSE button to pause a recording

in progress.

• Press the REC PAUSE button again during pause to

Recording the current

channel you are watching

resume recording.

• You can switch channels by pressing the CH/TRK

(

) buttons while recording pauses.

ꢀ

You can not change the recording mode and

the channel while recording.

1. Check the antenna cable is connected.

2. Check the remaining time on the disc.

Note

Recording will stop automatically if there is

no free space left for recording.

DVD-RAM/DVD-RW discs should be formatted in

advance before beginning recording. Most new discs

are sold unformatted. Make sure to format your unfor-

matted discs before recording.

ꢀ

Up to 99 titles can be recorded onto a disc.

If the power interrupted due to power failure

or other reasons, the title being recorded will

not be saved onto the disc.

Press the OPEN/CLOSE button and place a

ꢀ

Recording will stop automatically if a copy

protected image is selected.

recordable disc on the disc tray.

Do not use DVD-R authoring discs with this

unit.

Press the OPEN/CLOSE button to close the disc

tray.

Wait until “LOAD” disappears from the front panel

display.

English - 53

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect the DV output jack of your camcorder to

the DV input jack on the front of your DVD

Recorder & VCR using a DV cable.

Recording From

External Devices

Power on your DVD Recorder & VCR and switch

to DV mode by pressing the INPUT SEL. on the

remote control.

Follow these directions to record onto a disc or a tape

from External Devices.

Press the REC SPEED button repeatedly to select

the recording speed(quality).

Connect the AV out jack of your External Devices

➝ SP ➝ LP ➝ EP ➝ XP

to the AV IN jack on the front or rear of your DVD

Recorder & VCR using Audio/Video Cable.

Press the INPUT SEL. button to select DV.

If the input is set to DV, a playback/record menu that

enables camcorder control appears on the top of the

screen.

Power on your DVD Recorder & VCR and switch

to AV In mode by pressing the INPUT SEL. button

on the remote control .

The front panel display changes in the following

sequence depending on the Video input setting in

the menu.

The DV device is connected

AV1: ➝ Channel Number ➝ AV 1 ➝ AV 2 ➝ DV

S-Video: ➝ Channel Number ➝ SUPER ➝ AV IN 2➝ DV

Press the REC SPEED button repeatedly to select

MOVE

SELECT

RETURN

the recording speed(quality).

➝ SP ➝ LP ➝ EP ➝ XP

Select the Play icon on the upper part of the

screen to playback the camcorder and find the

starting position to copy.

When your DVD Recorder & VCR is in the stop

mode, set the operation mode of your External

Devices to play mode.

You can press the PLAY button on the remote

control to playback the camcorder.

Press the REC button on your DVD Recorder &

VCR to start recording when the desired video is

displayed from the external device.

To start recording, Press the œ √ button to select

rec(●) icon in the top side of the screen, then

press the ENTER button.

You can press the REC button of the remote con-

trol to start recording. To display playback related

icons on the screen, press any direction button on

the remote control.

Press the STOP button on your DVD Recorder &

VCR when the recording is finished.

ꢀ

Also refer to the user manual for your External

Devices when recording through AV In jacks on

the DVD/VCR using Audio/Video cables.

Note

Press the STOP button on your DVD Recorder &

For more information on changing the Video Input

from AV1 to S-Video, see page 32(Video Input).

VCR when the recording is finished.

ꢀ

Some camcorders may not work with your

DVD Recorder & VCR even if they have a DV

output jack.

Note

Recording through a DV

Input jack

Also refer to the user manual for your cam-

corder when recording through a DV jack.

You may control the Camcorder using the IEEE1394

(DV) interface.

Follow these directions to record onto a disc or tape

from a camcorder that has a DV output jack.

54 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Making a One Touch

Recording (OTR)

Making a Timer

Recording

The clock (Initial Setup – Clock Set) must be set before

proceeding with a timer recording. (See page 24)

One-Touch Recording (OTR) allows you to add record-

ing time in 30-minute increments up to 4 hours by

pressing the REC button.

Press the OPEN/CLOSE button, and place a

Press the CH/TRK (

) buttons or number but-

recordable disc on the disc tray.

tons to select the channel to record.

If you want to record through a connected external

component, press the INPUT SEL. button to

select an appropriate external input(AV1, AV2 or

DV).

Press the OPEN/CLOSE button to close the disc

tray.

Wait until “LOAD” disappears from the front panel

display.

• CATV channel: 1 to 125

• TV channel: 2 to 69

With the unit in Stop mode, press the MENU

Press the REC button to start recording.

button.

Press the …† buttons to select Timer Rec., then

While in Record mode, press the REC button

again to activate One-Touch Recording (OTR).

• Record length 0:30 appears on the On-Screen

Display and the DVD Recorder & VCR will record

for exactly 30 minutes.

press the ENTER or √ button.

Timer Record

DVD-RAM(VR)

Setup

Timer Record

√

Timer Rec.

Copy

Scheduled Record List

Title List

Playlist

Continue pressing REC to add recording time in

30 minute increments up to 4hours.

(see page 52)

Disc Manager

MOVE

SELECT

RETURN

EXIT

• The DVD Recorder & VCR stops recording auto-

matically when the time has elapsed.

Press the …† buttons to select Timer Record,

then press the ENTER or √ button.

You can also set a timer recording via the TIMER

REC button.

To stop recording

The Timer Recording screen are displayed.

Press the STOP (ꢁ) button.

Scheduled Record List

DVD-RAM(VR)

The message “Press Stop button once more to can-

cel Timer Record” is displayed.

No.

Source

Date

Start

No. 01

-- --:---- --:---- -- --

End

Type Mode Edit

Press the STOP (ꢁ) button again.

---

√

Source Date

Start

End

Mode

The message”Updating the Information of disc.

Please wait for a moment” is displayed.

DVD CH 01 01/01 12:00 AM 02:00 AM SP

Recordable Time 01:23 SP

Press numeric keys or …† keys.

ꢀ

The timer counter decreases by the minute

from 4:00 to 0:00, then the DVD Recorder

& VCR stops recording.

MOVE

SELECT

RETURN

EXIT

Note

English - 55

Download from Www.Somanuals.com. All Manuals Search And Download.

Fill in the items using the …†œ √ buttons.

œ √ : Moves to the previous/next item,

…† 0~9 : Sets a value.

•

Recording mode (VCR)

AUTO : Select when you want to set video quality auto-

matically. It depends on remaining time of VCR

tape.

• To : Select the media to record DVD or VCR.

• Source : The video input source (AV 1, AV 2 ), or

the broadcasting channel you want to

make a timer recording of.

SP : Standard Play, for best picture quality.

• Date: Date that the timer recording starts

SLP : Super Long Play, for maximum recording time (3

times SP).

…

01/31

01/30

Press the ENTER button.

•

will appear on the front panel. It means that a

timer recording is registered.

01/02

Present Date

01/01

MON-FRI

Sun's

If the timer settings overlap

The programs are recorded in order of priority.

If timer recording is set for the first program and

then again for the second program and both

programs overlap, the following message will

appear on the screen: “This setting is identical with

1.2” The message shows that the first program has

priority. After recording of the first program is

complete, the second program starts being

recorded.

Mon's

Sat's

†

• Start/End Time : Start and end time of the timer

recording.

To exit without saving the current setting

•

Recording mode (DVD)

Press the MENU or TIMER REC button.

AUTO : Select when you want to set video quality auto-

matically. It depends on the remaining time on

the DVD.

To return to the previous menu

Press the RETURN button if you don’t want to set a

XP (high quality) : Select when audio and video qualities

timer recording.

are important. (Approx. 1 hour)

SP (standard quality) : Select to record in standard qual-

ity. (Approx. 2 hours)

Turn the power off to finish the timer recording.

•

will blink if disc or tape is not inserted.

LP (low quality) : Select when a long recording time is

required.(Approx. 4 hours)

EP (extended mode) : Select when a longer recording

time is required. (Approx.6 hours

at 1.2 Mbps or Approx.8 hours

at 0.8 Mbps )

ꢀ

The timer recording time may differ from the set

time depending on disc status and overall timer

recording status (for example, recording times

overlapping, or when the previous recording

ends within 3 minutes before the start time of

the next recording.)

Note

ꢀ

When you are recording at EP mode on a

DVD-RW(V)/R disc, it may not record the full 6

or 8 hours because the unit uses the

Note

VBR(Variable Bit Rate) ENCODING system.

For example, if you record a program with a lot

of action, it uses a higher bit rate which in turn

consumes more disc memory.

56 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† button to select the number of the

scheduled record list you want to edit, then press

the ENTER or √ button.

Editing the Scheduled

Record List

• The Edit and Delete items are displayed.

Scheduled Record List

DVD-RAM(VR)

No. To

Source

Date

11/22

12/20

Start

End

Mode Edit

Edit

01 DVD CH 09

02 DVD CH 09

09:22AM

07:30AM

10:30AM

√

Delete

√

-- ---

-- --:---- --:---- --

√

Follow these directions to edit the timer record list.

MOVE

SELECT

RETURN

EXIT

Press the MENU button.

Press the …† button to select Edit, then press

the ENTER button.

• The Timer Recording screen is displayed.

Edit the items you want to modify. See the Timer

Recording section for more information on Timer

Recording Input items.(See page 56)

Press the …† button to select Timer Rec., then

press the ENTER or √ button.

Timer Record

DVD-RAM(VR)

Setup

Scheduled Record List

DVD-RAM(VR)

Timer Record

√

Timer Rec.

Copy

Scheduled Record List

No. To

01 DVD CH 09

To Source Date

Source

End

Mode Edit

^DateNo. 01^Start

11/22 09:22AM

10:30AM

√

Title List

Playlist

Start

07:30AM

End

Mode

01 DVD CH 09 12/20

10:30AM

DVD CH 01 01/01 12:00 AM 02:00 AM SP

-- ---

-- --:---- --:---- --

Recordable Time 01:23 SP

Disc Manager

MOVE

Press numeric keys or …† keys.

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† button to select Scheduled Record

List, then press the ENTER or √ button.

Press the ENTER button to confirm the edited set-

ting.

Scheduled Record List

DVD-RAM(VR)

No. To

Source

Date

11/22

12/20

Start

End

Mode Edit

01 DVD CH 09

02 DVD CH 09

09:22AM

07:30AM

10:30AM

√

Press the MENU button after finishing the opera-

tion. The menu screen will disappear.

-- ---

--/

-- --:---- --:---- --

MOVE

SELECT

RETURN

EXIT

English - 57

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† button to select the number of the

scheduled record list you want to delete, and then

press the ENTER button.

Deleting the

Scheduled Record List

• The Edit and Delete items are displayed.

Scheduled Record List

DVD-RAM(VR)

No. To

Source

Date

11/22

12/20

Start

End

Mode Edit

Edit

01 DVD CH 09

09:22AM

07:30AM

10:30AM

√

Delete

√

-- ---

-- --:---- --:---- --

√

Follow these directions to delete a title from the timer

record list.

MOVE

SELECT

RETURN

EXIT

Press the MENU button.

Press the …† button to select Delete, then press

the ENTER or √ button.

• You will be prompted with the delete confirm

message such as ‘Do you want to delete

No.01?’.

Press the …† button to select Timer Rec., then

press the ENTER or √ button.

Scheduled Record List

DVD-RAM(VR)

Timer Record

DVD-RAM(VR)

Setup

Timer Record

√

No. To

Source

End

Mode Edit

^DateNo. 01^Start

Timer Rec.

Copy

Scheduled Record List

01 DVD CH 09

11/22

09:22AM

10:30AM

√

01 DVD CH 09

12/20

07:30AM

10:30AM

-- --^D-^{o you}-^w-^{ant to delete ‘No. 01’?}

-- --:---- --:---- --

Title List

Playlist

Yes

Disc Manager

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† button to select Scheduled

Press the œ √ buttons to select Yes, then press

the ENTER button.

Record List, then press the ENTER or √ button.

• The selected title will be deleted from the list.

Timer Record

DVD-RAM(VR)

Setup

Timer Record

√

Press the MENU button after finishing the opera-

Timer Rec.

Copy

Scheduled Record List

tion. The menu screen will disappear.

Title List

Playlist

ꢀ

You can not delete programs that are cur-

rently recording.

Disc Manager

MOVE

SELECT

RETURN

EXIT

Note

Scheduled Record List

DVD-RAM(VR)

No. To

Source

Date

11/22

12/20

Start

End

Mode Edit

01 DVD CH 09

09:22AM

07:30AM

10:30AM

√

-- ---

-- --:---- --:---- --

MOVE

SELECT

RETURN

EXIT

58 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Maximum Recording Time - SP vs. SLP

Basic VCR Recording

Tape Length

T-120

SP (Standard Play) SLP (Super Long Play)

2 hrs

2hrs 40 mins

3 hrs

6 hrs

8 hrs

9 hrs

T-160

T-180

Before starting

1. Check TV channel and Antenna connections.

2. Check the remaining time on the tape.

ꢀ

When you watch or record on the VCR

during DVD Recording, some function buttons

may not operate.

You can record a TV show in progress by inserting a

Note

blank tape and pressing the

even add time in 30-minute increments up to 4 hours by

pressing the (REC)button repeatedly.

ꢂ(REC) button. You can

The message “This function is not available.”

will be displayed.

ꢂ

Press the ꢂ(REC) button on the remote control or

front panel.

ꢀ

Be sure your videotape has a Record Safety

Tab. If the tab is missing, you can cover the

opening with a small piece of tape.

Note

For options while recording is in progress, see

“Special Recording Features”.( see page 60)

ꢀ

Warning: Do not cover this opening unless you

are sure you want to record over the tape.

Press the STOP button to stop or finish a record-

CAUTION

ing in progress.

Pausing / Resuming

Insert a blank VHS tape into the VCR deck.

• Make sure the tape is long enough to record the

entire program.

• Press the REC PAUSE button to pause a recording

in progress.

• Press the REC PAUSE button again during pause to

resume recording.

Press the 0–9 buttons or the CH/TRK (

)

• You can switch channels by pressing the CH/TRK

buttons to select the desired channel.

(

) buttons while recording pauses.

Press the INPUT SEL. button to select AV 1, AV 2

or DV if recording from an external

device connected to the front or rear AV inputs,

respectively.

Check Remaining Time

Press the REC SPEED button on the remote con-

trol to set the Record Speed to one of the follow-

ing options:

• SP – Standard Play, for best picture quality.

• SLP – Super Long Play, for maximum recording

time (3 times SP).

Press INFO. button on the remote control.

Following information will be displayed.

(Current deck status, recording speed, remaining

time, input channel, current time.)

ꢀ

The selected Record Speed will appear on the

front panel display and on-screen display.

Note

RAM

STOP

VCR

STOP

0:00:02

0:00:03

SLP

Rem 06:07

Rem 05:41

CH 10

Wed Jan 19. 2005

09 : 51 PM

English - 59

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

When DVD Recorder & VCR is connected to

your TV using S-Video or component video

cable, the playback screen on the video tape

will not display during DVD recording.

You cannot record different channels at the

same time.

Special Recording

Features

Note

ꢀ

The DVD and VCR cannot start recording at

the exact same time. You must set one mode

to start recording, then the other.

While a recording is in progress, you can watch a differ-

ent channel, watch a different media, or add recording

time in 30-minute increments.

Watch a Different Channel

When you watching through the Antenna input

during recording, press the TV/VCR button on the

remote control. Change the channel you want to

watch.

- When you watching through AV input during

recording, change the input of your TV from AV

to Antenna.

Change the channel you want to watch.

Watch a different media during record-

ing

You can watch a DVD during VCR recording or

watch a Video tape during DVD recording.

• During VCR recording, insert a DVD in the DVD

deck. The output will automatically change to the

DVD and start playback.

• During DVD recording, insert a Video tape in the

VCR deck. The output will automatically change

to the VCR and start playback. (Only if tape is

missing the safety tab)

Add Recording Time

Refer to the One-Touch Recording (OTR).

(See page 55)

Recording DVD and VCR at the same

time

You can record DVD and VCR at the same time,

but both modes must be set up to record

separately.

• Press the DVD/VCR button to set the unit to

DVD or VCR mode.

• Choose AV input mode (CH, AV1, AV2 or DV).

for DVD or VCR.

• Choose REC mode for DVD or VCR.

• Press REC button for DVD or VCR.

60 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select desired copylist,

then press the ENTER or √ button.

Copy to DVD or VCR

Edit Copylist

DVD-RAM(VR)

No. Title

Length Edit

01 JAN/19/2005 1 00:00:21

Play

√

Rename

Edit Scene

Copy

Delete

JAN/19/2005 12:00 AM

7 Scenes

JAN/19/2005 12:00 AM

MOVE

SELECT

RETURN

EXIT

You can copy from the DVD to VCR or VCR to DVD.

Check the remaining time on the tape.

Press the …† buttons to select Copy, then press

the ENTER or √ button.

To copy from DVD to VCR

Edit Copylist

Length Edit

DVD-RAM(VR)

(VR mode)

No. Title

01 JAN/19/2005 1 00:00:21

Play

√

With the unit in Stop mode, press the MENU

Rename

Edit Scene

Copy

button.

Delete

JAN/19/2005 12:00 AM

7 Scenes

JAN/19/2005 12:00 AM

Press the …† buttons to select Copy, then press

the ENTER or √ button.

RETURN

MOVE

SELECT

EXIT

Copy

DVD-RAM(VR)

Setup

DVD - -> VCR

√

Timer Rec.

Copy

VCR - -> DVD

Direct copy DVD to VCR

Title List

Playlist

• Insert a DVD disc you want to copy.

• Insert a VHS tape.

Disc Manager

MOVE

SELECT

RETURN

EXIT

• Press the VCR copy button on front panel or

remote control(TO VCR).

Press the …† buttons to select DVD --> VCR,

• To stop recording, press the STOP button.

then press the ENTER or √ button.

DVD - -> VCR

DVD-RAM(VR)

Setup

New Copylist

Edit Copylist

Direct Copy

√

Timer Rec.

Copy

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Edit Copylist,

then press the ENTER or √ button.

Edit Copylist

Length Edit

DVD-RAM(VR)

No. Title

01 JAN/19/2005 1 00:00:21

√

JAN/19/2005 12:00 AM

7 Scenes

JAN/19/2005 12:00 AM

MOVE

SELECT

RETURN

EXIT

English - 61

Download from Www.Somanuals.com. All Manuals Search And Download.

You can use the

√√

√

II Iœœ √√

œœ

buttons to search for the end position.

To copy from VCR to DVD

Press the ENTER button at the end point.

• A copylist will be generated.

With the unit in Stop mode, press the MENU

Repeat the above steps to create the copylist.

• In VCR mode, the copylist cannot be saved.

button in stop mode.

VCR - -> DVD

DVD-RAM(VR)

Press the …† buttons to select Copy, then press

No. Start

End

Edit

00:00:21

00:01:04

--:--:--

√

the ENTER or √ button.

--:--:--

√

Copy

DVD-RAM(VR)

Setup

00:01:07

PLAY

DVD - -> VCR

√

Timer Rec.

Copy

VCR - -> DVD

Copy All

MOVE

SELECT

RETURN

EXIT

Title List

Playlist

Disc Manager

MOVE

Press the …† buttons to select desired copylist,

SELECT

RETURN

EXIT

then press the ENTER or √ button.

VCR - -> DVD

DVD-RAM(VR)

Press the …† buttons to select VCR-->DVD, then

No. Start

End

00:01:04

Edit

√

00:00:21

--:--:--

Play

press the ENTER or √ button.

--:--:--

Copy

√

Delete

VCR - -> DVD

DVD-RAM(VR)

00:01:10

PLAY

No. Start

End

Edit

--:--:--

√

Copy All

RETURN EXIT

MOVE

SELECT

00:00:10

STOP

Copy All

RETURN EXIT

Press the …† buttons to select Copy, then press

MOVE

SELECT

the ENTER or √ button.

VCR - -> DVD

DVD-RAM(VR)

You can use the

√√

No. Start

End

Edit

√

II Iœœ √√

œœ

00:00:21

--:--:--

00:01:04

--:--:--

buttons to search for the Start position.

Press the ENTER button at the start point.

√

00:00:21

RPS

VCR - -> DVD

DVD-RAM(VR)

Copy All

RETURN

No. Start

01 00:00:21

End

Edit

--:--:--

√

MOVE

SELECT

EXIT

00:00:30

STOP

• The VCR will fast forward, searching for a start

position and then automatically start a copy.

• It may not be match up with Start and END point

exactly.

Copy All

RETURN EXIT

MOVE

SELECT

•l

If you want to copy all content, select Copy All.

Direct copy VCR to DVD

• Insert the VHS tape you want to copy.

• Insert Recordable DVD disc.

• Press DVD copy button on front panel or remote

control(TO DVD).

• To stop recording press the STOP button.

62 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing the Title List

Editing

Follow these instructions to play back a scene from the

Title List.

This section introduces basic functions of DVD

editing and explains both edit functions for the

recording on a disc and edit functions for the

entire disc.

Using the TITLE LIST button

Press the TITLE LIST button.

The Title List screen is displayed.

Title List

DVD-RAM(VR)

No. Title

Length Edit

01 JAN/19/2005

02 JAN/19/2005

03 JAN/20/2005

04 JAN/20/2005

00:00:21

00:00:03

00:00:15

00:00:16

√

JAN/19/2005 12:00 AM

JAN/19/2005

12:00 AM

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select a title you want to

play from Title List, and then press the PLAY but-

ton.

The selected title will be played back.

To stop title play, press the STOP button.

To return the title list screen, press the TITLE

LIST button.

Playing the Title List.........................................................63

Basic Editing (Title List) ...................................................65

Renaming(Labeling) a Title.............................................65

Locking(Protecting) a Title ..............................................66

Deleting a Title ................................................................66

Deleting a Section of a Title ............................................67

Advanced Editing (Play List).............................................69

Creating a playlist ...........................................................69

Playing Titles in the Playlist............................................70

Renaming a Playlist Title.................................................71

Editing a Scene for the Playlist........................................72

Copying a Playlist Title to the VCR ................................75

Deleting a Playlist Title from the Playlist .......................76

Disc Manager ...................................................................77

Disc Protection.................................................................78

Formatting a Disc............................................................78

Finalizing a disc...............................................................79

Delete All Title Lists........................................................80

Unfinalizing a disc (V/VR mode).....................................81

Using the MENU button

Press the MENU button.

Setup

DVD-RAM(VR)

Setup

System

√

Timer Rec. Clock Set

Channel Set

Copy

Language

Title List

Audio

Playlist

Video

Parental Control

Disc Manager

MOVE

SELECT

RETURN

EXIT

English - 63

Download from Www.Somanuals.com. All Manuals Search And Download.

Title List Screen Elements

Press the …† buttons to select Title List, then

press the ENTER or √ button twice.

The Title List screen is displayed.

Title List

DVD-RAM(VR)

No. Title

Length Edit

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 JAN/19/2005 1 00:00:21

02 JAN/19/2005 1 00:00:03

03 JAN/20/2005 1 00:00:15

04 JAN/20/2005 1 00:00:16

√

Length ENdoi.t Title

01 JAN/19/2005 1 00:00:21

√

00:00:21

00:00:03

02 JAN/19/2005 1 00:00:03

03 JAN/20/2005 1 00:00:15

04 JAN/20/2005 1 00:00:16

√

JAN/19/2005 12:00 AM

√

03 Sports

00:00:15

Play

JAN/19/2005

12:00 AM

√

04 Movie

JAN/19/2005 12:00 AM

Delete

00:06:32

02/01/01

00:25:30(PM)

JAN/19/2005

12:00 AM

Edit

06 06

07 07

00:08:16

MOVE

SELECT

RETURN

EXIT

Protection

00:09:36

MOVE

SELECT MOVE RETURSNELECT EXIT RETURN

EXIT

Press the …† buttons to select a Title, then press

the ENTER or √ button.

The Edit menu is displayed:Play, Rename, Delete,

Edit, Protection(See pages 69~72)

! Playback screen for recorded titles.

@ Information window for the selected title: Title name,

recording date, recording time, lock status, recording

mode

Title List

DVD-RAM(VR)

No. Title

Length Edit

01 JAN/19/2005 1 00:00:21

02 JAN/19/2005 1 00:00:03

√

# Recorded title No.

03 JAN/20/2005 2 00:00:15

Play

04 JAN/20/2005 2 00:00:16

Rename

$ Recorded title name

JAN/19/2005 12:00 AM

Delete

Edit

% Recording Length (i.e., the playing time)

^ Edit menu

JAN/19/2005

12:00 AM

Protection

MOVE

SELECT

RETURN

EXIT

Play: Plays the selected title.

Rename: Renames the title of a selected title.

Delete: Deletes the selected title from the list.

Edit: Deletes a section of title.

Press the …† buttons to select Play to play the

title list, then press the ENTER button.

The selected title will be played back.

Protection: Locks or unlocks the selected title.

& Button display.

ꢀ

This may depend on the disc type.

DVD-R/DVD-RW(Video) has limited editing

function.

Note

Press the STOP button to stop playing.

To return the title list screen, press the TITLE LIST

button.

ꢀ

You can also play a recorded program by

pressing the ANYKEY button.

Note

DVD-RAM(VR)

1/4

00:01:45

ENG

Off

5.1CH

Off

MOVE

CHANGE

ꢀ

Press the …† buttons to select Title.

Press the œ √ buttons to select to play the

title list, then press the ENTER button.

64 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Rename

DVD-RAM(VR)

JAN

2005 12:00 AM

Basic Editing (Title List)

Back Space

Space

Delete

Clear

Save

MOVE

SELECT

RETURN

EXIT

Renaming(Labeling) a Title

Select the desired characters using the …† œ √

Follow these instructions to rename a title list name,

i.e., to edit the title of a recorded program.

buttons, press the ENTER button.

Rename

DVD-RAM(VR)

Sports(A1)

Press the TITLE LIST button.

The Title List screen is displayed.

Using the MENU button.

Back Space

Space

Delete

Clear

Save

• Press the MENU button.

MOVE

SELECT

RETURN

EXIT

• Press the …† buttons to select Title List, then

press the ENTER or √ button twice.

• Back Space: Moves the cursor one position

backwards.(Equivalent to the CLEAR button)

• Space: Enters a blank and moves the cursor one

forward (to the right).

Title List

DVD-RAM(VR)

No. Title

Length Edit

01 JAN/19/2005 1 00:00:21

02 JAN/19/2005 1 00:00:03

03 JAN/20/2005 1 00:00:15

04 JAN/20/2005 1 00:00:16

√

• Delete: Deletes the character at the cursor

position.

JAN/19/2005 12:00 AM

• Clear: Deletes all the character inputs.

• Save: Registers the character inputs.

JAN/19/2005

12:00 AM

MOVE

SELECT

RETURN

EXIT

Press the …† œ √ buttons to select Save, and

then press the ENTER button.

Press the …† buttons to select a title you want to

rename from the Title List, then press the ENTER

or √ button.

The changed title name is displayed in the title field

of the selected title.

Title List

DVD-RAM(VR)

Title List

DVD-RAM(VR)

No. Title

Length Edit

No. Title

Length Edit

01 JAN/19/2005 1 00:00:21

02 JAN/19/2005 1 00:00:03

√

01 JAN/19/2005 1 00:00:21

02 JAN/19/2005 1 00:00:03

√

03 JAN/20/2005 2Pla

0:00:15

03 Sports (A1)

00:00:15

04 JAN/20/2005 2Re

00:16

04 JAN/20/2005 1 00:00:16

JAN/19/2005 12:00 AM

Delete

Edit

Sports (A1)

JAN/20/2005

12:00 AM

JAN/19/2005

12:00 AM

Protection

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Rename, then

press the ENTER or √ button.

The Rename screen is displayed.

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 JAN/19/2005 1 00:00:21

02 JAN/19/2005 1 00:00:03

√

03 JAN/20/2005 2Pla

0:00:15

04 JAN/20/2005 2Re

00:16

JAN/19/2005 12:00 AM

Delete

Edit

JAN/19/2005

12:00 AM

Protection

MOVE

SELECT

RETURN

EXIT

English - 65

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the œ √ buttons to select On, then press

the ENTER button. The key icon on the informa-

tion window for the selected title changes to the

Locking(Protecting) a Title

Follow these instructions to lock a title to protect it from

accidental deletion.

locked status. (

➝

)

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

00:00:15

00:00:16

00:06:32

00:08:16

√

Press the TITLE LIST button.

Sports(A1)

JAN/19/2005

12:00 AM

The Title List screen is displayed.

Using the MENU button.

MOVE

SELECT

RETURN

EXIT

• Press the MENU button.

• Press the …† buttons to select Title List, then

press the ENTER or √ button twice.

Title List

DVD-RAM(VR)

Deleting a Title

No. Title

Length Edit

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

00:00:15

00:00:16

00:06:32

00:08:16

√

Follow these instructions to delete a title from the Title

List.

Drama

JAN/19/2005

12:00 AM

MOVE

SELECT

RETURN

EXIT

Press the TITLE LIST button.

The Title List screen is displayed.

Using the MENU button.

Press the …† buttons to select a title you want to

protect in the Title List, then press the ENTER or

√ button.

• Press the MENU button.

• Press the …† buttons to select Title List, then

press the ENTER or √ button twice.

Title List

DVD-RAM(VR)

Title List

DVD-RAM(VR)

No. Title

Length Edit

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

No. Title

Length Edit

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

00:00:15

00:00:16

00:06:32

00:08:16

√

00:00:15

Play

Sports(A1)

JAN/20/2004

12:00 AM

Delete

00:06:32

Edit

00:08:16

Drama

Protection

JAN/19/2005

12:00 AM

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Protection, then

press the ENTER or √ button.

Press the …† buttons to select a title you want to

delete in the Title List, then press the ENTER or √

button.

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

Title List

DVD-RAM(VR)

00:00:15

Play

No. Title

Length Edit

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

Sports(A1)

JAN/19/2005

12:00 AM

Delete

00:06:32

Edit

00:08:16

00:00:15

Play

Protection

Sports(A1)

JAN/19/2005

12:00 AM

Delete

00:06:32

MOVE

SELECT

RETURN

EXIT

Edit

00:08:16

Protection

Title List

DVD-RAM(VR)

MOVE

SELECT

RETURN

EXIT

Title Protection:

Off

Sports(A1)

JAN/19/2005

12:00 AM

MOVE

SELECT

RETURN

EXIT

66 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Delete, then

Deleting a Section of a Title

press the ENTER or √ button.

Follow these instructions to delete a section of a

Title List title.

Title List

Length Edit

DVD-RAM(VR)

No. Title

(VR mode)

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

00:00:15

Play

Press the TITLE LIST button.

Sports(A1)

JAN/19/2005

12:00 AM

Delete

00:06:32

The Title List screen is displayed.

Edit

00:08:16

Protection

Using the MENU button.

MOVE

SELECT

RETURN

EXIT

• Press the MENU button.

• Press the …† buttons to select Title List, then

press the ENTER or √ button twice.

You will be prompted with a confirmation mes-

sage.

DVD-RAM(VR), DVD-RW(VR mode): Since

Playlist is present, the message ‘Do you want to

delete?(Related playlists may be deleted.)’ is

displayed.

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

00:00:15

00:00:16

00:06:32

00:08:16

√

Title List

DVD-RAM(VR)

Drama

JAN/19/2005

12:00 AM

Do you want to delete?

(Related playlists

may be deleted.)

MOVE

SELECT

RETURN

EXIT

Sports(A1)

JAN/19/2005

12:00 AM

Yes

Press the …† buttons to select a title you want to

delete from the Title List, then press the ENTER

or √ button.

MOVE

SELECT

RETURN

EXIT

DVD-RW(Video mode), DVD-R: Since Playlist is

not present, the message ‘Do you want to delete?’

is displayed.

Title List

DVD-RAM(VR)

No. Title

Length Edit

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

Title List

DVD-RW(V)

00:00:15

Play

Sports(A1)

JAN/19/2005

12:00 AM

Delete

00:06:32

Do you want to delete?

Edit

00:08:16

Protection

MOVE

SELECT

RETURN

EXIT

Sports(A1)

JAN/19/2005

12:00 AM

Yes

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Edit, then press

the ENTER or √ button.

• The message may depend on the type of disc.

The Edit Title List screen is displayed.

Edit Title List

DVD-RAM(VR)

Press the œ √ buttons to select Yes, then press

Title List No. 05

the ENTER button.

Start

End

Start

End

00:00:00

ꢀ

You cannot delete a protected title.

If you want to delete a protected title, select

Off in the Title Protection menu.

00:00:10

Delete

Return

Sports(A1)

JAN/19/2005 11:50 PM

Note

MOVE

SELECT

RETURN

EXIT

ꢀ

Once a title is deleted from the Title List it

cannot be recovered.

Once DVD-R, DVD-RW is finalized, it cannot

be deleted.

With DVD-R, titles are only deleted from the

menu, however, the Title remains physically

on the disc.

English - 67

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER button at the starting point.

The image and starting point time are displayed in

the section deletion starting point window.

Edit Title List Screen Elements

Press the …† buttons to select Delete, then

press the ENTER button.

Edit Title List

DVD-RAM(VR)

Title List No. 05

Edit Title List

DVD-RAM(VR)

Start

End

Title List No. 05

Start

End

Start

End

00:00:10

00:10:10

Delete

Return

Start

End

00:00:10

00:00:00

Sports(A1)

JAN/19/2005 11:50 PM

➂

➃

00:00:10

Delete

Return

①

②

Sports(A1)

JAN/19/2005 11:50 PM

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Edit Title List

DVD-RAM(VR)

Title List No. 05

1 Playback bar

2 Playtime

Start

End

Do you want to delete?

3 Section deletion starting point window and time

4 Section deletion end point window and time

• Select the start and end points of the section

you want to delete using the playback related

buttons.

Start

00:00:06

(Deleted part will not be restored.)

00:10:15

Delete

Return

Yes

Sports(A1)

JAN/19/2005 11:50 PM

End

00:10:10

MOVE

SELECT

RETURN

EXIT

• Playback related buttons:

(

√II,Iœœ œœ √√

Press the

buttons to select YES, then press

œ √

the ENTER button.

The selected section has been deleted.

To return to the Title List screen, press the …†

buttons to select Return.

Press the ENTER button at the end point.

The image and end point time are displayed in the

Section deletion ending point window.

Edit Title List

DVD-RAM(VR)

ꢀ

The length of the section to be deleted must

be at least 5 seconds long.

Title List No. 05

Note

Start

End

If the length of the section to be deleted is

less than 5 seconds, you will be prompted

with the message 'The range is too short.'.

Start

End

00:00:10

00:10:10

Delete

Return

Sports(A1)

JAN/19/2005 11:50 PM

ꢀ

If the end time precedes the starting time,

you will be prompted with the message ‘End

point cannot be marked earlier than start

point’.

RETURN

MOVE

SELECT

EXIT

ꢀ

The section cannot be deleted when it

includes a still picture.

Press the MENU button after the operation

has finished.

The Title List screen will disappear.

68 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER button at the end point.

Make Scene

DVD-RAM(VR)

Advanced Editing

(Playlist)

Scene No. 001

Start

End

Start

End

00:00:10

00:10:00

Make

Return

New Playlist

JAN/19/05 12:00 AM

Creating a Playlist

MOVE

SELECT

RETURN

EXIT

Follow these instructions to create a new playlist title

from a recorded title.

• The image and end point time are displayed in

the End window.

(VR mode)

• The yellow-colored selection bar moves to the

Make icon.

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select Playlist, then

press the ENTER or √ button.

- To make a new playlist -

Playlist

DVD-RAM(VR)

Setup

Press the …† buttons to select Make, then press

New Playlist

√

the ENTER button.

Timer Rec.

Copy

Edit Playlist

A new Make Scene screen is displayed.

Repeat the above steps to create further scenes.

A new Scene will be added to the current Playlist.

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

ꢀ

You can check and see all the scenes on

Edit Playlist screen.

Note

Press the …† buttons to select New Playlist,

then press the ENTER or √ button.

- To return to Edit Playlist menu -

The Make Scene screen is displayed.

Make Scene

DVD-RAM(VR)

Press the …† buttons to select Return, then

press the ENTER button.

Scene No. 001

The Edit Playlist screen is displayed.

Start

End

Start

End

00:00:00

Edit Playlist

DVD-RAM(VR)

00:00:10

Make

Return

No. Title

Length Edit

New Playlist

JAN/20/05 12:00 AM

01 JAN/19/2005

02 JAN/19/2005

03 JAN/20/2005

04 JAN/20/2005

00:00:21

00:00:03

00:00:15

00:00:16

√

MOVE

SELECT

RETURN

EXIT

JAN/19/2005 12:00 AM

7 Scenes

Press the ENTER button at the start point.

JAN/19/2005 12:00 AM

MOVE

SELECT

RETURN

EXIT

Make Scene

DVD-RAM(VR)

Scene No. 001

Start

End

Press the MENU or PLAY LIST button after the

operation has finished.

Start

End

00:00:10

00:00:00

00:00:10

Make

Return

The Edit Playlist screen will disappear.

New Playlist

JAN/20/05 12:00 AM

MOVE

SELECT

RETURN

EXIT

ꢀ

You can create up to 99 playlist titles.

• The image and time at the start point are dis-

played on the Start window.

Depending on the kind of disc, the displayed

screen may have a slight difference.

Note

• The yellow-colored selection bar moves to the

End item.

• Select the starting point of the section from

which you want to create a new scene using the

playback related buttons (

√II,Iœœ √√I œœ √√

English - 69

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Play, then press

the ENTER button.

Playing Titles in the Playlist

Follow these instructions to play the playlist titles.

The playlist titles will be played back.

Edit Playlist

Length Edit

DVD-RAM(VR)

(VR mode)

No. Title

01 JAN/19/2005

02 JAN/19/2005

03 JAN/20/2005

04 JAN/20/2005

00:00:21

00:00:03

√

Press the PLAY LIST button.

00:00:15

Play

:16

The Edit Playlist screen is displayed.

JAN/20/2005 12:00 AM

Edit Scene

Copy

4 Scenes

Using the MENU button.

JAN/20/2005 12:00 AM

Delete

• Press the MENU button with the disc stopped.

• Press the …† buttons to select Playlist, then

press the ENTER or √ button.

MOVE

SELECT

RETURN

EXIT

• Press the …† buttons to select Edit Playlist,

then press the ENTER or √ button.

Playlist

DVD-RAM(VR)

Setup

New Playlist

√

Timer Rec.

Copy

Edit Playlist

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

Press the STOP button to stop playing.

The screen returns to the Edit Playlist screen.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 JAN/19/2005

02 JAN/19/2005

03 JAN/20/2005

04 JAN/20/2005

00:00:21

00:00:03

00:00:15

00:00:16

√

JAN/19/2005 12:00 AM

4 Scenes

JAN/19/2005 12:00 AM

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the title you want

to play from the Playlist, then press the ENTER or

√ button.

The Edit Playlist menu is displayed : Play,

Rename, Edit Screen, Copy, Delete.

70 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Renaming a Playlist Title

Rename

DVD-RAM(VR)

Follow these instructions to rename a playlist title, i.e.

to edit the title of a playlist title.

JAN

2005 12:00 AM

(VR mode)

Press the PLAY LIST button.

Back Space

Space

Delete

Clear

Save

MOVE

SELECT

RETURN

EXIT

The Edit Playlist screen is displayed.

Using the MENU button.

• Press the MENU button with the disc stopped.

• Press the …† buttons to select Playlist, then

press the ENTER or √ button.

Enter the desired characters using the …† œ √

buttons.

Rename

DVD-RAM(VR)

Dolphin

• Press the …† buttons to select Edit Playlist,

then press the ENTER or √ button.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 JAN/19/2005

02 JAN/19/2005

03 JAN/20/2005

04 JAN/20/2005

00:00:21

00:00:03

00:00:15

00:00:16

√

Back Space

Space

Delete

Clear

Save

MOVE

SELECT

RETURN

EXIT

JAN/19/2005 12:00 AM

4 Scenes

JAN/19/2005 12:00 AM

• This function is the same as the Rename func-

tion in renaming the title list. (See page 65.)

• The maximum number of characters that can be

entered is 31.

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the title you want

to rename from the Playlist, then press the

ENTER or √ button.

Press the …† œ √ buttons to select Save, then

press the ENTER button.

The Edit menu is displayed :Play, Rename, Edit

Scene, Copy, Delete

The changed title is displayed in the title field of

the selected title.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

Edit Playlist

Length Edit

DVD-RAM(VR)

01 JAN/19/2005

02 JAN/19/2005

03 JAN/20/2005

04 JAN/20/2005

00:00:21

00:00:03

√

No. Title

01 JAN/19/2005

02 JAN/19/2005

03 Dolphin

00:00:21

00:00:03

00:00:15

00:00:16

√

00:00:15

Play

:16

JAN/20/2005 12:00 AM

Edit Scene

Copy

04 JAN/20/2005

4 Scenes

Dolphin

JAN/19/2005 12:00 AM

Delete

4 Scenes

MOVE

SELECT

RETURN

EXIT

JAN/20/2005 12:00 AM

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Rename, then

press the ENTER button.

The Rename screen is displayed.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 JAN/19/2005

02 JAN/19/2005

03 JAN/20/2005

04 JAN/20/2005

00:00:21

00:00:03

√

00:00:15

Play

:16

JAN/20/2005 12:00 AM

Edit Scene

Copy

4 Scenes

JAN/19/2005 12:00 AM

Delete

MOVE

SELECT

RETURN

EXIT

English - 71

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Edit Scene, then

press the ENTER button.

Editing a Scene for the Playlist

Follow these instructions to edit scenes for a playlist.

The Edit Scene screen is displayed.

(VR mode)

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

Press the PLAY LIST button.

01 Science

02 Sky

00:00:17

00:00:06

√

The Edit Playlist screen is displayed.

03 Dolphin

04 Natural

00:00:06

Play

:37

Using the MENU button.

Dolphin

Edit Scene

Copy

7 Scenes

• Press the MENU button with the disc stopped.

• Press the …† buttons to select Playlist, then

press the ENTER or √ button.

JAN/20/2005 06:43 AM

Delete

MOVE

SELECT

RETURN

EXIT

• Press the …† buttons to select Edit Playlist,

then press the ENTER or √ button.

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

1/7

Play

Modify

Move

Edit Playlist

DVD-RAM(VR)

No. Title

Length Edit

00:00:26

00:00:07

00:00:04

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

√

Add

03 Dolphin

04 Natural

00:00:03

00:00:11

00:00:04

Delete

Science

MOVE

SELECT

RETURN

EXIT

7 Scenes

JAN/20/2005 06:43 AM

MOVE

SELECT

RETURN

EXIT

Playing a Selected Scene

Press the …† buttons to select the title you want

to edit from the Playlist, and then press the

ENTER or √ button.

Press the …†œ √ buttons to select the scene

you want to play, then press the ENTER button.

The playlist title to be played is selected.

The Edit Playlist menu is displayed:Play, Rename,

Edit Scene, Copy, Delete

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

Edit Playlist

Length Edit

DVD-RAM(VR)

2/7

No. Title

Play

Modify

Move

01 Science

02 Sky

00:00:17

00:00:06

√

03 Dolphin

04 Natural

00:00:06

Play

00:00:26

00:00:07

00:00:11

00:00:04

:37

Science

Edit Scene

Copy

Add

7 Scenes

00:00:03

00:00:04

JAN/20/2005 06:43 AM

Delete

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the ENTER button.

The selected scene will be played back.

• To stop scene play, press the STOP button.

72 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER button at the end point of the

Modifying a Scene (Replacing a Scene)

scene.

Modify Scene

DVD-RAM(VR)

To setup, follow steps 1 to 3 in page 72.

Scene No. 001

Start

End

Press the …† œ √ buttons to select the scene

Start

End

00:00:20

00:00:30

you want to modify, then press the ENTER button.

Title List : 1/7

00:00:30

Change

Return

Natural

JAN/19/2005 06:43 AM

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

2/7

MOVE

SELECT

RETURN

EXIT

Play

Modify

Move

• The image and ending point time are displayed

in the End window.

00:00:26

00:00:03

00:00:07

00:00:11

00:00:04

Add

Delete

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Change, then

press the ENTER button.

Press the …† buttons to select Modify, then

press the ENTER button.

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

2/9

Play

Modify

Move

The Modify Scene screen is displayed.

Modify Scene

DVD-RAM(VR)

00:00:26

00:00:07

00:00:11

00:00:04

Scene No. 001

Add

Start

End

00:00:03

00:00:04

Delete

Start

End

00:00:00

MOVE

SELECT

RETURN

EXIT

Title List : 1/7

Natural

00:00:20

Change

Return

• The scene you want to modify is changed with

the selected section.

JAN/20/2005 06:43 AM

MOVE SELECT

RETURN

EXIT

Press the ENTER button at the start point of the

scene.

Modify Scene

DVD-RAM(VR)

Scene No. 001

Start

End

Start

End

00:00:20

00:00:00

Title List : 1/7

00:00:20

Change

Return

Natural

JAN/20/2005 06:43 AM

MOVE

SELECT

RETURN

EXIT

• The image and starting point time are displayed

on the Start window.

• Select the starting or ending point of the section

you want to modify using the playback related

buttons (

√II,Iœœ √√I œœ √√

English - 73

Download from Www.Somanuals.com. All Manuals Search And Download.

■

You cannot move the selected scene to the

position of the next scene, because the

selected scene should be inserted before that

position, which requires no action.

Moving a Scene (Changing the Position of a Scene)

Note

To setup, follow steps 1 to 3 in page 72.

Press the …† œ √ buttons to select the scene you

■

Depending on the kind of disc, the displayed

screen may have a slight difference.

want to move (change the position), then press the

ENTER button.

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

Adding a Scene

3/7

Play

Modify

Move

To setup, follow steps 1 to 3 in page 72.

00:00:26

00:00:03

00:00:07

00:00:11

00:00:04

Add

Press the …† œ √ buttons to select the scene

Delete

that will have a new scene inserted before it, then

press the ENTER button.

MOVE

SELECT

RETURN

EXIT

A yellow selection window is displayed on the

scene to be added as the new scene.

Press the …† buttons to select Move, then press the

ENTER button.

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

4/3

3/7

Play

Modify

Move

Play

Modify

Move

00:00:26

00:00:00

00:00:07

00:00:04

00:00:26

00:00:07

00:00:11

00:00:04

Add

Delete

00:00:03

00:00:04

Delete

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select add, then press

the ENTER button.

•

A yellow selection window is displayed on the

scene to be moved.

The Add Scene screen is displayed.

Add Scene

DVD-RAM(VR)

Press the …† œ √ buttons to select the position

to which you want to move the selected scene,

then select the ENTER button.

Scene No. 004

Start

End

Start

End

00:00:00

Title List : 1/7

Science

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

00:00:10

Add

6/7

Cancel

JAN/10/2005 06:43 AM

Play

Modify

Move

MOVE SELECT

RETURN

EXIT

00:00:26

00:00:07

00:00:11

00:00:04

Add

Press the ENTER button at the starting point of

00:00:03

00:00:04

Delete

the scene.

MOVE

SELECT

RETURN

EXIT

Add Scene

DVD-RAM(VR)

•

The selected scene is moved to the selected

position.

Scene No. 004

Start

End

Start

End

00:00:15

00:00:00

Title List : 1/7

Science

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

00:00:15

Add

5/7

Play

Modify

Move

Cancel

JAN/10/2005 06:43 AM

MOVE SELECT

RETURN

EXIT

00:00:26

00:00:11

00:00:04

00:00:03

Add

• The image and starting point time are displayed

in the Start window.

00:00:07

Delete

MOVE

SELECT

RETURN

EXIT

• Select the end point of the section where you

want to add the new scene using the playback

related buttons (

√II,Iœœ √√I œœ √√

74 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER button at the end point of the

Copying a Playlist Title to the VCR

scene.

Add Scene

DVD-RAM(VR)

Press the PLAY LIST button.

Scene No. 004

The Edit Playlist screen is displayed.

Start

End

Using the MENU button.

Start

End

00:00:15

00:00:35

Title List : 1/7

• Press the MENU button with the disc stopped.

• Press the …† buttons to select Playlist, and

then press the ENTER or √ button.

00:00:35

Add

Sclence

JAN/10/2005 06:43 AM

Cancel

MOVE

SELECT

RETURN

EXIT

• Press the …† buttons to select Edit Playlist,

and then press the ENTER or √ button.

• The image and time of the end point are dis-

played in the End window.

Edit Playlist

DVD-RAM(VR)

• To cancel, press the …† buttons to select

cancel and then press the ENTER button.

No. Title

Length Edit

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

√

03 Dolphin

04 Natural

Press the …† buttons to select Add, then press

Science

the ENTER button.

7 Scenes

JAN/20/2005 06:43 AM

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

MOVE

SELECT

RETURN

EXIT

4/4

Play

Modify

Move

Press the …† buttons to select the title you want

to copy to the VCR, and then press the ENTER or

√ button.

00:00:26

00:00:07

00:00:00

00:00:04

Add

00:00:35

Delete

The Edit Playlist menu is displayed:Play, Rename,

Edit Scene, Copy, Delete.

MOVE

SELECT

RETURN

EXIT

• The section you want to add is inserted prior to

the scene selected in step 4 of Adding a Scene

on the previous page.

Edit Playlist

DVD-RAM(VR)

No. Title

Length Edit

01 Science

02 Sky

00:00:17

00:00:06

√

03 Dolphin

04 Natural

00:00:06

Play

:37

Deleting a Scene

Dolphin

Edit Scene

Copy

7 Scenes

JAN/20/2005 06:43 AM

Delete

To setup, follow steps 1 to 3 in page 72.

MOVE

SELECT

RETURN

EXIT

Press the …† œ √ buttons to select the scene

Press the …† buttons to select Copy, then press

the ENTER button.

you want to delete, and then press the ENTER

button.

• The title you choose is played and copied to

VCR tape.

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

4/4

Play

Modify

Move

Edit Playlist

DVD-RAM(VR)

No. Title

Length Edit

00:00:26

00:00:07

00:00:00

00:00:04

01 Science

02 Sky

00:00:17

00:00:06

√

Add

03 Dolphin

04 Natural

00:00:06

Play

:37

00:00:35

Delete

Dolphin

Edit Scene

Copy

MOVE

SELECT

RETURN

EXIT

7 Scenes

JAN/20/2005 06:43 AM

Delete

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Delete, then

press the ENTER button.

Press the MENU button after the operation has

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

finished. The menu screen will disappear.

4/3

Play

Modify

Move

00:00:26

00:00:07

00:00:04

ꢀ

The playlist can contain up to 99 playlist

titles (titles).

Add

Note

00:00:00

Delete

MOVE

SELECT

RETURN

EXIT

English - 75

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Delete, then

Deleting a Playlist Title from the

Playlist

press the ENTER button.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 Science

02 Sky

Press the PLAY LIST button.

00:00:17

00:00:06

√

The Edit Playlist screen is displayed.

03 Dolphin

04 Natural

00:00:06

Play

:37

Using the MENU button.

Dolphin

Edit Scene

Copy

7 Scenes

• Press the MENU button with the disc stopped.

• Press the …† buttons to select Playlist, then

press the ENTER or √ button.

APR/20/2005 06:43 AM

Delete

MOVE

SELECT

RETURN

EXIT

• Press the …† buttons to select Edit Playlist,

then press the ENTER or √ button.

• You will be prompted with the delete confirma-

tion message ‘Do you want to delete?.

Edit Playlist

Length Edit

DVD-RAM(VR)

Edit Playlist

DVD-RAM(VR)

No. Title

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

√

03 Dolphin

04 Natural

Do you want to delete?

Science

7 Scenes

Yes

Dolphin

JAN/20/2005 06:43 AM

7 Scenes

JAN/20/2005 06:43 AM

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the title you want

to delete from the Playlist, then press the ENTER

or √ button.

Press the œ √ buttons to select Yes, then press

the ENTER button.

The Edit Playlist menu is displayed:Play, Rename,

Edit Scene, Copy, Delete

It automatically returned to the Edit Playlist screen

after the delete operation has finished.

Edit Playlist

DVD-RAM(VR)

Edit Playlist

DVD-RAM(VR)

No. Title

01 Science

02 Sky

Length Edit

00:00:17

00:00:06

√

Deleting...

(Please wait)

03 Dolphin

04 Natural

00:00:06

Play

Rename

00:00:37

Dolphin

Edit Scene

Copy

7 Scenes

Dolphin

JAN/20/2005 06:43 AM

Delete

7 Scenes

JAN/20/2005 06:43 AM

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

√

03 Natural

Natural

7 Scenes

APR/23/2005 06:43 AM

MOVE

SELECT

RETURN

EXIT

76 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Enter the desired characters using the …† œ √

buttons.

Disc Manager

Rename

DVD-RAM(VR)

Disc

Editing the Disc Name

Back Space

Space

Delete

Clear

Save

Follow these instructions to give a name to a disc.

MOVE

SELECT

RETURN

EXIT

• This function is the same as the Rename

function in renaming the title list. (See page 65.)

• The maximum number of characters that can be

entered is 31.

With the unit in Stop mode, press the MENU

button.

Setup

DVD-RAM(VR)

Setup

Press the …† œ √ buttons to select Save, then

press the ENTER button.

System

√

Timer Rec. Clock Set

A disc name is given to the disc.

Channel Set

Copy

Language

Title List

Playlist

DVD-RAM(VR)

Setup

Audio

Playlist

Video

Disc Name

: Disc

: Not Protected

√

Parental Control

Disc Protection

Disc Format

√

Disc Manager

MOVE

Timer Rec.

Copy

SELECT

RETURN

EXIT

Delete All Title Lists

Title List

Playlist

Disc Manager

MOVE

Press the …† buttons to select Disc Manager,

SELECT

RETURN

EXIT

then press the ENTER or √ button.

Disc Manager

DVD-RAM(VR)

Setup

ꢀ

You may need to clear disc protection before

beginning editing.(see page 78)

Disc Name

√

Disc Protection

Disc Format

: Not Protected

√

Timer Rec.

Copy

Note

Depending on the kind of disc, the displayed

screen may be different.

Delete All Title Lists

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Disc Name, then

press the ENTER or √ button.

The Edit Name screen is displayed.

Rename

DVD-RAM(VR)

Back Space

Space

Delete

Clear

Save

MOVE

SELECT

RETURN

EXIT

English - 77

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Protection

Formatting a Disc

Disc Protect allows you to protect your discs from being

formatted or deleted due to unintended operations.

Use these instructions to format a disc.

The disc protect should be cleared

With the unit in Stop mode, press the MENU

button.

With the unit in Stop mode, press the MENU

button.

Setup

DVD-RAM(VR)

System

√

Setup

Clock Set

Channel Set

Language

Audio

Setup

DVD-RAM(VR)

Timer Rec.

Copy

Setup

System

√

Clock Set

Channel Set

Language

Audio

Timer Rec.

Copy

Title List

Playlist

Video

Parental Control

Title List

Playlist

Disc Manager

MOVE

Video

SELECT

RETURN

EXIT

Parental Control

Disc Manager

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Disc Manager,

then press the ENTER or √ button.

Press the …† buttons to select Disc Manager,

Disc Manager

DVD-RAM(VR)

then press the ENTER or √ button.

Setup

Disc Name

√

Disc Protection

Disc Format

: Not Protected

Disc Manager

DVD-RAM(VR)

Setup

Timer Rec.

Copy

Disc Name

√

Delete All Title Lists

Disc Protection

Disc Format

: Not Protected

√

Timer Rec.

Copy

Title List

Playlist

Delete All Title Lists

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

Disc Manager

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Disc Format,

then press the ENTER or √ button.

Press the …† buttons to select Disc Protection,

then press the ENTER or √ button.

Disc Manager

DVD-RAM(VR)

Setup

Disc Name

√

Disc Protection

Disc Format

: Not Protected

√

Disc Manager

DVD-RAM(VR)

Setup

Timer Rec.

Copy

Disc Name

√

Delete All Title Lists

Disc Protection

Disc Format

: Not Protected

Not Protected

√

Timer Rec.

Copy

Title List

Playlist

Portected

Delete All Title Lists

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

Disc Manager

MOVE

DVD-RAM

SELECT

RETURN

EXIT

• You will be prompted with the confirmation

message 'Do you want to format disc?'.

Press the …† button to select Protected, then

Disc Manager

DVD-RAM(VR)

press the ENTER or √ button.

Setup

Disc Name

√

Timer Rec.

Disc Protection

: Not Protected

√

Disc Format

Do you want to format disc?

Disc Manager

Copy

Title List

Playlist

DVD-RAM(VR)

Setup

Delete All Title Lists

Disc Name

√

Cartridge Protection Inf

Yes

Disc Protection

Disc Format

: Protected

√

Timer Rec.

Copy

√

Disc Manager

MOVE

Delete All Title Lists

Title List

Playlist

SELECT

RETURN

EXIT

Disc Manager

MOVE

• You will be prompted with the confirmation

message 'All data will be deleted. Do you want

to continue?'.

SELECT

RETURN

EXIT

78 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-RW

• You will be prompted with the confirmation

Press the …† buttons to select Disc Manager,

then press the ENTER or √ button.

message ‘Choose the recording format for

DVD- RW.’

Disc Manager

DVD-RW(VR)

Setup

Disc Name

√

Disc Protection

Disc Format

: Not Protected

: DVD-VR

√

Timer Rec.

Copy

Disc Manager

DVD-RW(VR)

Setup

Disc Name

√

Disc Finalize

Title List

Playlist

Disc Protection

Disc Format

Disc Finalize

: Not Protected

: DVD-VR

√

Delete All Title Lists

Timer Rec.

Copy

Choose the recording format for DVD-RW.

Disc Manager

MOVE

Title List Delete All Title Lists

DVD-VR

SELECT

DVD-V

SELECT

RETURN

EXIT

Playlist

Disc Manager

MOVE

RETURN

EXIT

Press the …† button to select Disc Finalize, then

press the ENTER or √

Press the œ √ buttons to select Yes, then press

Disc Manager

DVD-RW(VR)

Setup

the ENTER button. The disc is formatted.

Disc Name

√

Disc Protection

Disc Format

: Not Protected

: DVD-VR

√

Timer Rec.

Copy

DVD-VR and DVD-V are defined according to

their recording format.

Disc Finalize

Title List

Playlist

Delete All Title Lists

DVD-VR

DVD-V

Disc Manager

MOVE

DVD-RAM

DVD-RW

DVD-R

DISC

SELECT

RETURN

EXIT

Disc Manager

DVD-R(V)

Setup

Disc Name

√

Disc Protection

Disc Finalize

: Not Protected

√

Timer Rec.

Copy

Delete All Title Lists

Finalizing a disc

Title List

After you record titles onto a DVD-RW/DVD-R disc with

your DVD Recorder & VCR, it needs to be finalized

before it can be played back on external devices.

Disc Manager

MOVE

SELECT

RETURN

EXIT

You will be prompted with the message 'Do you want to

finalize disc?'. If you select Yes, you will be prompted

again with the message ' Disc will be finalized. Do you

want to continue?'

With the unit in Stop mode, press the MENU

button.

Setup

DVD-RW(VR)

Disc Manager

DVD-RW(VR)

Setup

System

√

Setup

Clock Set

Channel Set

Language

Audio

Disc Name

√

Timer Rec.

Copy

Timer Rec.

Copy

Disc Protection

Disc Format

: Not Protected

: DVD-VR

√

Do you want to finalize disc?

Title List

Playlist

Disc Finalize

Title List

Playlist

Video

Delete All Title Lists

Yes

Parental Control

Disc Manager

MOVE

Disc Manager

MOVE

SELECT

RETURN

EXIT

SELECT

RETURN

EXIT

Disc Manager

DVD-RW(VR)

Setup

Disc Name

√

Timer Rec.

Copy

Disc Protection

: Not Protected

√

Disc Format

Disc will be finalized.

: DVD-VR

DDioscyoFuinwalaiznet to continue?

Title List

Playlist

Delete All Title Lists

Yes

Disc Manager

MOVE

SELECT

RETURN

EXIT

English - 79

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† button to select Delete All Title

Press the œ √ buttons to select Yes, then press the

ENTER button.

Lists, then press the ENTER or √ button.

Disc Manager

DVD-RAM(VR)

Setup

The disc is finalized.

Disc Name

√

Disc Protection

Disc Format

: Not Protected

√

Timer Rec.

Copy

ꢀ

Once a disc is finalized, you cannot delete

titles from the record list.

Delete All Title Lists

Title List

Playlist

Note

After being finalized, the DVD-R/DVD-

RW(video mode) operates in the same man-

ner as a DVD-Video.

Disc Manager

MOVE

SELECT

RETURN

EXIT

ꢀ

Depending on the disc type, the displayed

screen may be different .

• You will be prompted with the confirmation mes-

sage 'Do you want to delete all title lists?'.

Finalizing time may be different depending

on the amount of data recorded on the disc.

Disc Manager

DVD-RAM(VR)

Setup

Data on the disc will be damaged if the

recorder is powered off during finalize

process.

Disc Name

√

Disc Protection

Disc Format

: Not Protected

√

Timer Rec.

Copy

Delete All Title Lists

Do you want to delete all title lists?

Title List

Yes

Playlist

Disc Manager

MOVE

Delete All Title Lists

SELECT

RETURN

EXIT

• When Protected Title exists: The Delete All Title

List function will not operate. If there is a title

containing a still picture, however, that function

will not operate.

With the unit in Stop mode, press the MENU

button.

Setup

DVD-RAM(VR)

If you want to delete a protected title, disable

Protect for it on the Lock item.

System

√

Setup

Clock Set

Channel Set

Language

Audio

Timer Rec.

Copy

Title List

Playlist

Press the œ √ buttons to select Yes, then press

the ENTER button.

Video

Parental Control

Disc Manager

MOVE

All title lists are deleted.

SELECT

RETURN

EXIT

Press the …† buttons to select Disc Manager,

then press the ENTER or √ button.

Disc Manager

DVD-RAM(VR)

Setup

Disc Name

√

Disc Protection

Disc Format

: Not Protected

√

Timer Rec.

Copy

Delete All Title Lists

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

80 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the œ √ buttons to select Yes, then press

the ENTER button.

Unfinalizing a disc (V/VR mode)

The disc is unfinalized.

■

A DVD-RW can be finalized or unfinalized in

With the unit in Stop mode, press the MENU

Video mode.

button.

Note

Finalize

Unfinalize

DVD-RW(V)

Setup

DVD-RW(VR:F)

Mark

DVD-Video(RW)

System

√

Setup

Clock Set

Channel Set

Language

Additional recording, protection

and deletion are possible.

Timer Rec.

Copy

Operation Same as DVD-Video

Title List Audio

Video

Playlist

Parental Control

■

Disc Manager

MOVE

A DVD-RW can be finalized or unfinalized in

VR mode.

SELECT

RETURN

EXIT

Finalize

Unfinalize

Press the …† buttons to select Disc Manager,

then press the ENTER or √ button.

Mark

DVD-RW(VR:F)

DVD-RW(VR)

Disc Manager

DVD-RW(VR:F)

Additional recording,

deletion, editing, and

Additional recording,

deletion, editing, and

protection are possible.

Setup

Disc Name

√

Operation

Disc format

Disc Unfinalize

: DVD-VR

√

Timer Rec.

Copy

protection are impossible.

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

Press the …† button to select Disc Unfinalize,

then press the ENTER or √ button.

You will be prompted with the message 'Do you

want to unfinalize disc?'.

Disc Manager

DVD-RW(VR:F)

Setup Disc Name

√

Disc format

: DVD-VR

√

Timer Rec.

Copy

Disc Unfinalize

Do you want to unfinalize disc?

Title List

Playlist

Yes

Disc Manager

MOVE

SELECT

RETURN

EXIT

If you select Yes, you will be prompted again with

the message ' Disc will be unfinalized. Do you

want to continue?'

Disc Manager

DVD-RW(VR:F)

Setup

Disc Name

√

Disc format

Disc Unfinalize

: DVD-VR

√

Timer Rec.

Copy

Disc will be unfinalized.

Do you want to continue?

Title List

Playlist

Yes

Disc Manager

MOVE

SELECT

RETURN

EXIT

English - 81

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Troubleshooting

†

Specifications

†

LIMITED WARRANTY TO ORIGINAL

PURCHASER

Troubleshooting ................................................................83

Specifications ....................................................................86

82 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

(DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R)

If your product malfunctions, go through the check points below before contacting a Samsung authorized ser-

vice center,

Problem

Explanation/Solution

•

Check whether the power cord is securely plugged into the power outlet.

Did you press the power button of your DVD Recorder & VCR.

No power.

The input is displayed

for a while when the

power turns on.

•

The DVD Recorder & VCR requires some time to initialize after it is turned on.

•

Check whether the power cord is securely plugged into the power outlet.

Did you set the DVD Recorder & VCR channel settings correctly?

Check the free space on your DVD-RAM/DVD-RW/DVD-R disc.

Check the antenna cable is connected.

Cannot record TV

programs.

Timer recording does

not work properly.

•

Check the recording time, end time and current time settings again.

Recording will be cancelled if the power is interrupted due to a power

failure or other reason during recording.

•

Check whether the disc is formatted. This product can record on

formatted discs only. (See page 78.)

Cannot record.

Check whether your DVD-RAM/DVD-RW/DVD-R disc has a sufficient free space.

I pressed the REC

button but there is

no response.

•

Recording is available on DVD-RAM/DVD-RW/DVD-R discs only.

If a program is copy protected, you cannot record it.

I forget the password

for parental lock.

•

Press the and

buttons of your DVD Recorder & VCR at the same time when the

√√I

√

power is on, and then press the POWER OFF/ON button. All settings including password

will revert to factory settings. Do not use it if not absolutely required.

(Note that this function is available only when there is no disc inserted.)

•

Check whether the disc is inserted correctly with the label facing up.

Check the regional code of your DVD disc.

Cannot playback the

disc.

This DVD Recorder & VCR cannot playback some types of disc. (See page 5.)

•

Are you watching a program in slow or skip mode?

If you are playing a program at a speed other than normal speed, sound

is not output.

No sound.

•

Check the connections and initial settings.

Check whether the disc is damaged.

Clean up the disc, if necessary.

•

Check whether the disc is inserted correctly with the label facing up.

English - 83

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting(DVD)

Problem

Explanation/Solution

You cannot use the operation or function due to one of the following reasons:

(1) Your DVD disc does not support the feature (for example, angles)

(2) You've requested a title, chapter, or scan time that is out of the correct range.

icon appears on

the screen.

Play mode settings are

different from the set-

tings configured with

the Setting menu.

The disc does not support all the selected functions.

In this case, some settings you configure on the Setting menu may not work properly.

Cannot change the

aspect ratio.

Aspect ratio is fixed for DVD disc.

No audio output.

Check whether you selected correct digital output options in the Audio Output Options menu.

Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place?

In this case, remove discs and wait for one to two hours with the power on, and then, insert

the disc and try to playback again. It will work properly when condensation has evaporated.

No video or audio output.

The disc tray is ejected

after 2 to 5 seconds.

Angle operation does not

work during playback of a

DVD disc.

Angle operation is available only when the disc contains images captured at different

angles.

• Check whether there is damage or foreign materials on your disc.

• Some discs with bad manufacturing quality may not be played back.

• If the scene changes from dark to bright suddenly, the screen

may jitter temporarily, but it is not a defect.

The disc revolves, but

no image or bad quali-

ty images are output.

Desired sound

language and

Sound languages and subtitle languages are disc-specific.

Only the sound and subtitle languages contained on a DVD disc are

available and displayed on the disc menu.

subtitle language are

not played.

• Check whether PSO is displayed on front panel.

• Make sure to change the component video output using the Progressive button when the

disc is stopped.

No progressive

output.

The remote control

doesn't work.

• Point the remote control at the remote control sensor on your DVD Recorder & VCR.

Operate within distance. (15ft)

Remove obstacles between your DVD Recorder & VCR and remote control.

• Check whether the batteries are depleted.

• Read the table of contents and then find and read the sections

describing your problem, and follow the directions given.

• Turn the unit off and on.