Samsung Cassette Player SV 2313X User Guide

VIDEO

CASSETTE RECORDER

SV-635X

SV-631X

SV-6315X

SV-6313X

SV-530X

SV-435X

SV-431X

SV-235X

SV-231X

SV-2315X

SV-2313X

Instruction Manual

www.samsungvcr.com

PAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents (cont.)

Safety Instructions

The following illustrations represent precautions.

◆ PLAYING BACK

◆

Playing a Cassette......................................................................................... 31

Adjusting Picture Alignment Manually ........................................................... 31

Intelligent Picture Control .............................................................................. 32

Intelligent Picture Control (SV-631X/SV-6315X/SV-6313X/SV-530X/

SV-435X/SV-431X/SV-235X/SV-231X/SV-2315X/SV-2313X Only).............. 32

FORMAT 16:9 (WIDE SCREEN)................................................................... 33

Selecting the Colour Mode ............................................................................ 33

Selecting the Audio Output Mode (SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X)... 34

Selecting the Audio Mute Mode (SV-435X/SV-431X/SV-235X/SV-231X/

SV-2315X/SV-2313X).................................................................................... 34

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.

DO NOT OPEN THE VCR. Refer to service personnel.

◆

10%

75%

40°C

◆ SEARCHING FOR A SEQUENCE

5°C

◆

Playing a Cassette in Slow Motion ................................................................ 35

Playing a Sequence Frame by Frame........................................................... 35

Playing a Sequence at Variable Speeds ....................................................... 36

Searching for a Specific Sequence ............................................................... 36

Auto Repeat Play........................................................................................... 37

Interval Repeat Play ...................................................................................... 37

Using the Tape Counter ................................................................................ 38

Do NOT expose the VCR to

extreme temperature condi-

tions (below 5°C and above

40°C) or to extreme humidity

conditions (less than 10% and

more than 75%).

Do NOT expose the VCR to

direct sunlight.

Do NOT expose the VCR to

any liquids.

◆ ADVANCED RECORDING FEATURES

◆

Connecting an RCA Audio/Video Input Cable (SV-635X/SV-631X/

SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X Only)............................. 39

Using the Assemble Edit Function................................................................. 40

Recording from Another VCR or Camcorder................................................. 40

Audio Dubbing a Pre-recorded Cassette (SV-635X Only)............................. 41

◆

◆ OTHER FUNCTIONS AND USEFUL RECOMMENDATIONS

◆

Using the TV Buttons on the Remote Control (SV-635X Only) ..................... 42

Auto Power Off .............................................................................................. 43

Child door Lock System (SV-635X/SV-530X/SV-435X/SV-235X Only) ........ 43

Technical Specifications................................................................................ 44

◆ SOLVING PROBLEMS

◆

Problems and Solutions................................................................................. 45

◆

TV Frequency Table (System-B/G) ............................................................... 46

Do NOT place any objects on

the VCR or remote control.

During a storm and/or light-

ning, unplug the VCR from the

mains socket and aerial.

If the remote control is not

used for a long period of time,

remove the batteries and store

it in a cool, dry place.

Symbols

◆

Option

◆

Press/push

Hold down

Important

Note

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS

= Step number

Download from Www.Somanuals.com. All Manuals Search And Download.

Infrared Remote Control (SV-635X)

Front View of the VCR

SV-435X/SV-235X

SV-635X

STANDBY/ON

BUTTON

VIDEO CASSETTE

COMPARTMENT

RECORD

BUTTON

REW

BUTTON

EJECT

BUTTON

F.F

BUTTON

VCR STANDBY/ON

TV STANDBY/ON

VCR STANDBY/ON BUTTON

TV STANDBY/ON BUTTON

SLOW

VCR

SLOW BUTTON

TV BUTTON

SHUTTLE

SHUTTLE BUTTON

VCR BUTTON

STANDBY/ON

EJECT

V-LOCK

DISP./

V-LOCK BUTTON

DISPLAY BUTTON

^REWPLAY F.F

CLEAR AND RESET BUTTON

CLR/RST

-/--

F.ADV

INDEX

FRAME ADVANCE BUTTON

VIDEO

AUDIO

VIDEO

AUDIO

PROG

REC

STOP

INDEX BUTTON

AUX

PROGRAMME SELECTION / TRACKING

BUTTONS

VOL

PROG/TRK

INPUT

TUNER, AV1, AV2, AUX SELECTION BUTTON /

REPEAT SELECTION BUTTON

REPEAT

VOLUME BUTTONS

MENU BUTTON

AUDIO MODE SELECTION BUTTON

TV/VCR SELECTION BUTTON

SHOWVIEW BUTTON

RECORD BUTTON

AUX VIDEO

INPUT SOCKET

PROGRAMME

SELECTION BUTTONS

AUX AUDIO L, R

INPUT SOCKETS

PLAY

BUTTON

STOP

BUTTON

AUX VIDEO/AUDIO

INPUT SOCKETS

AUDIO DUBBING BUTTON

RECORDING SPEED SELECTION BUTTON

PLAY/PAUSE/STILL BUTTON

(MENU SELECTION UP BUTTON)

REWIND/REVERSE PICTURE

SEARCH BUTTON

(MENU SELECTION BUTTON)

SV-631X/SV-6315X/SV-6313X/SV-530X

SV-431X/SV-231X/

SV-2315X/SV-2313X

FAST-FORWARD/FORWARD

SEARCH BUTTON

(MENU SELECTION BUTTON)

VIDEO CASSETTE RECORD

STANDBY/ON

BUTTON

PLAY BUTTON

OK BUTTON

EJECT

STOP BUTTON

COMPARTMENT

BUTTON

(MENU SELECTION DOWN BUTTON)

STANDBY/ON

EJECT

REW PLAY F.F

Infrared Remote Control (SV-631X/SV-6315X/SV-6313X/SV-530X/

SV-435X/SV-431X/SV-235X/SV-231X/SV-2315X/SV-2313X)

PROG

REC

STOP

VIDEO

AUDIO

AUX

AUX VIDEO

INPUT SOCKET

PROGRAM

SELECTION BUTTONS

AUX AUDIO L, R

INPUT SOCKETS

STOP

BUTTON

REW

BUTTON

F.F

BUTTON

STANDBY/ON

EJECT

STANDBY/ON BUTTON

SLOW BUTTON

EJECT BUTTON

SLOW

Q-PRO

IPC

QUICK PROGRAMME BUTTON

IPC BUTTON

Rear View of the VCR

SHUTTLE

V-LOCK

SHUTTLE BUTTON

V-LOCK BUTTON

DISPLAY

DISPLAY BUTTON

◆

AV2(DECODER/EXT.) SCART

(EURO-21) SOCKET

RCA AUDIO L, R OUTPUT SOCKETS (SV-635X/

SV-631X/SV-6315X/SV-6313X/SV-530X ONLY)

CLEAR AND RESET BUTTON

INDEX BUTTON

FRAME ADVANCE BUTTON

CLR/RST

F.ADV

INDEX

TRK

PROG

PROGRAMME SELECTION BUTTONS

TRACKING BUTTONS

AUDIO MODE SELECTION BUTTON

(SV-631X/SV-6315X/SV-6313X/SV-530X)

◆

TUNER, AV1, AV2, AUX (SV-631X/SV-6315X/

INPUT

SV-6313X/SV-530X/SV-435X/SV-235X ONLY) SELECTION

BUTTON /

REPEAT

REPEAT SELECTION BUTTON

MENU BUTTON

RECORD BUTTON

AUDIO MUTE BUTTON (SV-435X/SV-431X/

SV-235X/SV-231X/SV-2315X/SV-2313X)

RECORDING SPEED SELECTION BUTTON

(SV-631X/SV-6315X/SV-6313X/SV-530X/

TV/VCR SELECTION BUTTON

SHOWVIEW

◆

SV-435X/SV-431X ONLY)

OUT

◆

(SV-530X/SV-435X/SV-235X ONLY)

AERIAL IN

CONNECTOR

AUDIO

AV2(DECODER/EXT.)

AV1(EURO AV)

PLAY/PAUSE/STILL BUTTON

(MENU SELECTION UP BUTTON)

REWIND/REVERSE PICTURE SEARCH BUTTON

(MENU SELECTION BUTTON)

FAST-FORWARD/FORWARD

SEARCH BUTTON

(MENU SELECTION BUTTON)

STOP BUTTON

(MENU SELECTION DOWN BUTTON)

OK BUTTON

OUT TO TV

CONNECTOR

AV1(EURO AV) IN/OUT

SCART (EURO-21) SOCKET

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Indicator

Deciding How to Connect Your VCR

You must take into account various factors when connecting audio or video systems:

◆

Types of connectors available on your systems

Systems connected permanently to the VCR (satellite receiver for example) or temporarily

(camcorder for example)

Your VCR is equipped with the following connectors.

IPC

NICAM

Connector

Location

Type

Direction

Recommended Use

AV1

Rear

SCART

In/Out

◆ Television

◆ Satellite receiver

◆ Other VCR

◆(SV-635X/SV-631X/SV-6315X/

SV-6313X/SV-530X ONLY)

◆(SV-635X/SV-631X/SV-6315X/

SV-6313X ONLY)

AV1(EURO AV)

AV2

Rear

SCART

In/Out

Out

◆ Decoder for scrambled Pay TV

broadcasts

Example:

Cassette loaded indicator

VCR indicator

Multi-function display

IPC (Intelligent Picture Control) indicator

Timer indicator

AV2(DECODER/EXT.)

CANAL+.

◆ Satellite receiver

◆ Other VCR

Record indicator

OUT TO TV

Rear

75 Ω

◆ Television

◆

NICAM indicator (SV-635X/SV-631X/SV-6315X/SV-6313X ONLY)

◆

Hi-Fi indicator (SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X ONLY)

coaxial

IN FROM ANT. Rear

75 Ω

coaxial

◆ Aerial

◆ Cable television network

◆ Satellite receiver

AUX

Front

Audio/Video RCA

◆ Audio Hi-Fi system

◆ Camcorder

VIDEO

AUDIO

Accessories

AUX

◆ Hi-Fi Stereo VCR

◆

(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X only)

AUX

Front

Audio/Video RCA

◆ Audio system

◆ Camcorder

◆ Other VCR

VIDEO

AUDIO

You have just purchased a SAMSUNG Video Cassette Recorder (VCR).

Together with your VCR, you will find the following accessories in the box.

AUX

◆

(SV-435X/SV-235X only)

Audio output

Rear

Audio RCA

Out

◆ Audio Hi-Fi system

RCA AUDIO CABLE

OWNER’S INSTRUCTIONS

COAXIAL CABLE

REMOTE CONTROL

◆

OUT

(SV-635X/SV-631X/

SV-6315X/SV-6313X/

SV-530X ONLY)

AUDIO

◆

(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X only)

◆

Whenever you connect an audio or video system to your VCR, ensure that all elements are

switched off.

Refer to the documentation supplied with your equipment for detailed connection instructions

and associated safety precautions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Your VCR to the TV using the Coaxial Cable

Connecting a Decoder for scrambled PAY TV broadcasts

To receive television programmes a signal must be received from

one of the following sources:

◆

An outdoor aerial

Aerial

DECODER

An indoor aerial

ORTIE

A cable television network

A satellite receiver

AV1(EURO AV)

AUDIO

SCART Cable

◆

Make sure that both the television and the VCR are

switched off before connecting the cables.

Aerial Connector

Remove the aerial or network input cable from the television.

OUT

AUDIO

AV2(DECODER/EXT.)

AV1(EURO AV)

Connect this cable to the 75Ω coaxial socket marked

on the

rear of your VCR.

Plug the coaxial cable supplied into the

socket on your VCR.

SCART Cable

SORTIE

AUDIO

Plug the other end of the coaxial cable into the connector

previously used for the aerial on the television.

This VCR is fully equipped to receive scrambled Pay TV broadcasts.

Example:

You can:

CANAL+ or Premiere broadcasts.

To obtain better quality pictures and sound on your television, you

can also connect your VCR to the television via the SCART cable

(see section below) if your television is equipped with this type of

connection.

◆

Record a scrambled programme while watching another channel

Record another channel while watching a scrambled programme

◆

When the DECODER is connected to the AV2 socket, AV2 SET must be set to DEC (see page 22)

Connecting Your VCR to the TV using the SCART Cable

Connect the VCR to the television as indicated on page 10.

Plug the SCART cable with the decoder into the AV2(DECODER/EXT.) socket on the rear of the VCR.

Plug the other end into the decoder.

Aerial

OUT

AUDIO

AV2(DECODER/EXT.)

RF coaxial cable

AV1(EURO AV)

SCART Cable

You can connect your VCR to the television using the SCART cable if the appropriate input is available on

the television. You thus:

◆

Obtain better quality sound and pictures

Simplify the setting up procedure of your VCR

◆

Regardless of the type of connection chosen, you must always connect the coaxial cable

supplied. Otherwise, no picture will be visible on the screen when the VCR is switched off.

Make sure that both the television and the VCR are switched off before connecting the cables.

◆

You can connect your VCR to a Hi-Fi system.

Example: You wish to take advantage of the quality of your Hi-Fi stereo system when watching a

◆

programme or recording via your VCR. (SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X only)

Connect the coaxial cable as indicated in the above section.

Connect one end of the SCART cable to the AV1(EURO AV) socket on the rear of the VCR.

Plug the other end into the appropriate connector on the television.

Plug the RCA Audio cable with stereo system into the Audio out socket on the rear of the VCR.

(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X only)

◆

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Your VCR to the Satellite receiver or Other Equipment

Plug & Auto Set Up

Your VCR will automatically set itself up when it is plugged into the

mains for the first time. TV stations will be stored in memory. The

process takes a few minutes. Your VCR will then be ready for use.

You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate

outputs are available on the equipment chosen. The following illustrations give a few examples of the

connection possibilities.

1. AV1(EURO AV): By means of 21-pin Scart Cable

Connect the coaxial cable as indicated on page 10.

(Connecting Your VCR to the TV Using the Coaxial Cable)

Plug the SCART Cable with satellite receiver or other equipment into the AV1(EURO AV) socket on the rear of the

VCR.

After making this connection, select the source by pressing the INPUT button for the AV1 input sources.

Plug the VCR into the mains. It will automatically tune itself in and

store TV stations in the memory.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner.

RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR,

e.g. re-adjust to channel 33.

The process will finish after a few minutes. Then the VCR

automatically switches itself off.

Aerial

Satellite Receiver or other Equipment

Aerial Connector

AV1(EURO AV)

OUT

AUDIO

AV2(DECODER/EXT.)

AV1(EURO AV)

SCART Cable

1. AV2 IN: By means of 21-pin Scart Cable

When the satellite receiver or other equipment is connected to the AV2 socket, AV2 SET must first be

set to EXT. (see page 22)

Plug the SCART Cable with satellite receiver or other equipment into the AV2(DECODER/EXT.) socket on the rear

of the VCR.

After making this connection, select the source by pressing the INPUT button for the AV2 input sources.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner.

Aerial

Satellite Receiver or other Equipment

SCART Cable

OUT

AUDIO

AV2(DECODER/EXT.)

AV1(EURO AV)

SCART Cable

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning Your Television for the VCR

You must tune your television for the VCR only if you are not using

a Scart cable

◆

(SV-631X/SV-6315X/SV-6313X/

◆

(SV-635X)

SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/ SV-2315X/SV-2313X)

◆

To view pictures from your VCR when a Scart cable is

used, the television must be set to the audio/video mode

(AV).

STANDBY/ON

VCR STANDBY/ON

Switch on the television.

Switch on the VCR by pressing STANDBY/ON on the front of the

VCR or VCR STANDBY/ON (STANDBY/ON) on the remote

control.

SLO

SHUT

SHUTT

Select a programme position on the television to be reserved for

use with your VCR.

Insert the video cassette in the VCR. Check that the VCR starts

reading the cassette; if not, press

button

❿

Start a scan on your television or set the television to UHF

channel 36.

Fine tune the television until the pictures and sound are obtained

clearly.

If you cannot find the pictures and sound, or there is interference

from nearby channels, it may be necessary to change the setting

of the VCR output channel (see Solving Problems section of this

manual).

When the picture and sound are perfectly clear, store this channel

at the desired programme position on the television.

Result:

That programme is now reserved for use with your VCR.

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when

you:

◆

Purchase the video cassette recorder

◆

Find that the remote control is no longer working

correctly

Push the tab in the direction of the arrow to release the battery

compartment cover on the rear of the remote control.

Insert two AA, R6 or equivalent batteries, taking care to respect

the polarities:

◆

+ on the battery with + on the remote control

– on the battery with – on the remote control

◆

Replace the cover by aligning it with the base of the remote

control and pushing it back into place.

◆

Do not mix different battery types (manganese and

alkaline for example).

Setting the Date and Time

Your VCR contains a 24-hour clock and calendar used to:

PROG

OPTIONS INSTALL

◆

Automatically stop programme recording

Preset your VCR to record a programme automatically

CLOCK

BONUS

LANG

IMPOSTA OROLOGIO

You must set the date and time when:

◆

You purchase the video cassette recorder

The power supply remains off for more than 1 hour

"❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

◆

The date and time are set automatically from the

broadcast signal, but this function will not operate if

there is no Teletext signal. (SV-635X/SV-530X/

SV-435X/SV-235X Only)

Do not forget to reset the time when you change

clocks from winter to summer time and vice versa.

◆

(SV-635X/SV-530X/SV-435X/SV-235X)

◆

CLOCK

12:00 1/GEN/2000

SAB

Press MENU on the remote control.

AGGIORNA ORA : SI

Result:

The programming menu is displayed.

➛❿ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

❷

USCITA:MENU

Press the corresponding

❷

➛

❿

buttons to select the

IMPOSTA OROLOGIOoption.

Press the OK button to select this option.

Result: The IMPOSTA OROLOGIOmenu is displayed.

◆

(SV-631X/SV-6315X/SV-6313X/SV-431X/

SV-231X/SV-2315X/SV-2313X)

Press

➛

❿

to select the hour, minutes, day, month and year.

CLOCK

Result:

The option selected flashes.

12:00 1/GEN/2000

SAB

Press the

The day of the week is displayed automatically.

or buttons down to scroll more

quickly through the values.

On completion, press MENU twice to exit the menu.

❷

buttons to increase or decrease the value.

Result:

◆

You can hold the

❷

➛❿ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

❷

USCITA:MENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the VCR Output Channel

Displaying/Hiding On-Screen Information

Your VCR output channel may need to be changed if the pictures

suffer from interference or if your TV cannot find the pictures.

Also, you can change the VCR output channel to adjust the

frequency in which information is displayed on the screen.

Your VCR displays most information both on the VCR and the

television.

◆

(SV-635X/SV-631X/SV-6315X/SV-6313X)

You can choose to display or hide this information on the television

screen (except for the Index, Programming MENU and Showview

◆

(SV-635X/SV-631X/SV-6315X/SV-6313X)

INSTALL

◆

SINTONIA AUTOMATICA

SINTONIA MANUALE

(SV-635X/SV-530X/SV-435X/SV-235X only) function, which

Press MENU on the remote control.

OPTIONS

cannot be hidden).

STANDARD TV

Result:

The programming menu is displayed.

❿

:SI

❿

CANALE VCR OUT

SELEZIONE AV2

:CH36

:DEC

DURATA NASTRO :E180

NORMA COLORE

IPC

:AUTO

:SI

:AUTO

:SI

Press the corresponding

❷

➛

❿

buttons to select the

Press MENU on the remote control.

INSTALLAZIONEoption.

16:9

Result:

The programming menu is displayed.

"❷

❿

USCITA:MENU

NICAM

Press the OK button to select this option.

"❷

❿

USCITA:MENU

Press the corresponding

❷

➛

❿

buttons to select the

Result:

The INSTALLAZIONEmenu is displayed.

◆

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

FUNZIONIoption.

Press the

or ❷ buttons, until the cursor is placed in front of the

◆

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

Press the OK button to select this option.

Result: The FUNZIONImenu is displayed.

CANALE VCR OUToption.

INSTALL

Select the required output channel (CH21~CH69) by pressing the

SINTONIA AUTOMATICA

SINTONIA MANUALE

Press the corresponding

❷

buttons, until the cursor is placed

➛

❿

buttons.

OPTIONS

in front of the MENUoption.

❿

CANALE VCR OUT

SELEZIONE AV2

:CH36

:DEC

❿

:SI

DURATA NASTRO :E180

On completion, press MENU twice to exit the menu.

Then tune your television again (see page 14).

To...

Press

➛

or ❿, until...

NORMA COLORE

IPC

16:9

:AUTO

:SI

:AUTO

Display on-screen information

Hide on-screen information

SIis displayed.

"❷

❿

USCITA:MENU

NOis displayed.

"❷

❿

USCITA:MENU

On completion, press MENU twice to exit the menu.

◆

Selecting the RF OUT Sound Mode (B/G-D/K) (SV-635X/

SV-631X/SV-6315X/SV-6313X Only)

Choosing Your Language

You can choose the sound mode (B/G or D/K) according to the TV

set connected to your VCR.

You can change the language in which information is displayed on

the screen.

REPEAT

Press MENU on the remote control.

INSTALL

Result:

The programming menu is displayed.

SINTONIA AUTOMATICA

SINTONIA MANUALE

STANDARD TV

❿

:CH36

:DEC

Press the corresponding

❷

➛

❿

buttons to select the

Press MENU on the remote control.

Result: The programming menu is displayed.

CANALE VCR OUT

SELEZIONE AV2

INSTALLAZIONEoption.

Press the OK button to select this option.

Result: The INSTALLAZIONEmenu is displayed.

Press the corresponding

❷

➛

❿

buttons to select the

"❷

❿

USCITA:MENU

SELEZIONE LINGUAoption.

Press the corresponding

❷

buttons, until the cursor is

Press the OK button to select this option.

Result: The SELEZIONE LINGUAmenu is displayed.

placed in front of the STANDARD TVoption.

Press the

❿

button to select G or K.

Select the required language by pressing the

Press OK to store the language selected.

Press MENU to exit the menu.

❷

buttons.

LANG

ENGLISH

DUTCH

NORSK

SVENSKA

MAGYAR

POLSKI

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

On completion, press MENU twice to exit the menu.

❿

Result:

From now on, all the on-screen information will be

displayed in the language selected.

"❷ꢀꢀꢀꢀꢀꢀ➛❿

MEMORIA:OK

USCITA:MENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Presetting the Stations Manually

Presetting the Stations Automatically

◆

You do not need to preset the stations manually if you

have already set them automatically.

◆

You do not need to preset the stations if you have already

set them automatically (see Plug & Auto Set Up on page 13)

Your VCR contains a built-in tuner used to receive television

To enable the VCR to decode a scrambled TV station, the

decoder must be switched on.

INSTALL

OPTIONS INSTALL

broadcasts.

PROG

Press the MENU button on the remote control.

Result: The programming menu is displayed.

INSTALL

OPTIONS INSTALL

PROG

You must preset the stations received through the tuner. This can

be done:

CLOCK

BONUS

LANG

CLOCK

BONUS

LANG

Press the corresponding

INSTALLAZIONEoption.

❷ꢀor

➛

❿

buttons to select the

◆

Plug & Auto Set up (see page 13)

Automatically

Manually (see page 19)

INSTALLAZIONE

Press the OK button to select this option.

Result: The INSTALLAZIONEmenu is displayed.

❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

You can store up to 99 stations.

Press the corresponding or buttons, until the cursor is

placed in front of the SINTONIA MANUALEoption.

❷

◆

To enable the VCR to decode a scrambled TV station, the

decoder must be activated after the scan (see pages 19 or 21).

◆

(SV-635X/SV-631X/SV-6315X/SV-6313X)

(SV-635X/SV-530X/SV-435X/SV-235X)

Press the

Result:

❿

button to select SINTONIA MANUALEoption.

The INDICE PROGRAMMImenu is displayed.

Press the MENU button on the remote control.

Result: The programming menu is displayed.

Press the corresponding ❷ꢀor buttons to select the

INSTALLAZIONEoption.

SELEZIONE NAZIONE

INSTALL

BELGIQUE

DENMARK

ESPAÑA

ITALIA

NORGE

ÖSTERREICH

DEUTSCHLAND

FINLAND

NETHERLANDS

SCHWEIZ

ALTRI

Press the

required.

❷

buttons to select a programme number as

SINTONIA AUTOMATICA

❿

SINTONIA MANUALE

STANDARD TV

➛

❿

Press the ❿ꢀbutton to preset the station.

CANALE VCR OUT

SELEZIONE AV2

:CH36

:DEC

Result:

The SINTONIA MANUALEmenu is displayed.

Press the OK button to select this option.

SVERIGE

Result:

The INSTALLAZIONE menu is displayed.

Press the

Result:

➛

or buttons to start scanning.

❿

"❷ ➛❿

CONFERMA:OK

"❷

❿

USCITA:MENU

The frequency band is scanned and the first station

found is displayed.

Press the corresponding

❷

buttons, until the cursor is placed

in front of the SINTONIA AUTOMATICAoption. And then press

If you know the number of the channel you want, press the

numeric buttons on the remote control for example, for channel

E21, first press “0” and then press “2”, “1” (see page 46).

the button to select this option.

❿

◆

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

◆

With SV-635X, SV-530X, SV-435X and SV-235X, you can select

your country.

a. Press the

Press the

❷

button to place the cursor in front of the DECODER.

ATTENZIONE: TUTTI I DATI

VERRANNO CANCELLATI

❷

buttons to select your country.

INSTALL

10 Press the

❿

button to activate or deactivate use of the decoder for

SINTONIA AUTOMATICA

◆

The VCR searches for the stations according to a preset

preference list corresponding to the country that you have

selected.

the TV station, if necessary.

❿

SINTONIA MANUALE

CANALE VCR OUT

SELEZIONE AV2

TASTO OK PER CONTINUARE

TASTO MENU PER FINIRE

:CH36

:DEC

11 Press the or buttons until the cursor is placed in front of the

❷

NOME

b. Press OK button.

Result: A message appears, indicating that any channels

already preset on your VCR will be deleted.

The station name is set automatically from the broadcast signal.

◆

(SV-635X/SV-530X/SV-435X/SV-235X only)

"❷

❿

USCITA:MENU

12 To change the programme’s name, press the ❿ꢀbutton.

Press OK to start the auto scanning.

Result:

The first letter of the name flashes.

◆

The ATTENDERE, PREGO... indication flashes

on the television screen.

SINTONIA AUTOMATICA

ATTENDERE, PREGO...

13 To...

Then...

◆

The first frequency band is scanned and the first

station found is displayed and stored.

INDICE PROGRAMMI

Select a character

in the name

Press the

❷

button until the

PR CH

NOME DECODER

required character is displayed

(letters, numbers or “-” character).

❿

1 --- ----

2 --- ----

3 --- ----

4 --- ----

◆

The VCR then searches for the second station and so on.

When the automatic scanning procedure has

finished, the VCR switches automatically to pro-

gramme 1.

I--------------------I

Move to the next or

previous character

Press the

❿

➛

buttons

respectively.

USCITA:MENU

◆

The number of stations automatically stored by the VCR

14 If you...

Then...

◆ Press the corresponding

"❷

CAMBIA:❿ SPOSTA:OK

depends on the number of stations that it has found.

CANC.:CLR/RST

Wish to store the

station displayed

or ❷ꢀbuttons

(country, reception conditions, etc.)

to place the cursor in front of the REG

If you wish to cancel the auto scanning before the end, press the

MENU button three times to exit the menu.

◆ Press the or

➛

❿

buttons to adjust the

picture, if necessary.

◆ Press OK to store the station .

** SINTONIA MANUALE **

◆

The time and date are set automatically from the

broadcast signal. If the signal is weak or ghosting

occurs, the time and date may not be set automatically.

In this case, they should be set manually (see page 15).

Do not wish to

◆ Press the corresponding

❷

buttons

❿ꢀꢀCH

: ---

store the station

to place the cursor in front of the CH

REG.

DECODER : NO

NOME : AAA-

displayed

◆ Press the or buttons to go on

➛

❿

scanning the frequency band and display

◆

(SV-635X/SV-530X/SV-435X/SV-235X Only)

the next station

"❷

➛❿

MEMORIA:OK

USCITA:MENU

Once the auto scanning procedure has finished, some

stations may have been stored more than once; select

the stations with the best reception and delete the

ones no longer required (see page 20).

◆ Go back to the beginning of Step 14

15 Repeat this procedure from Step

onwards, until all the required

stations have been stored.

On completion, press the MENU button three times to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clearing a Preset Station

Changing the Preset Station Table

If you have stored a TV station:

You can rearrange the preset TV stations according to your own

preferences programme number assigned to the station.

◆

That you do not require

At the wrong programme position

Press the MENU button on the remote control.

Result: The programming menu is displayed.

INDICE PROGRAMMI

INSTALL

OPTIONS INSTALL

PROG

PR CH

NOME DECODER

you can cancel it.

❿

1 002 ----

2 005 ----

3 009 ----

4 011 ----

5 025 ----

CLOCK

BONUS

LANG

Press the corresponding

❷ꢀor

➛

❿

buttons to select the

INSTALLAZIONEoption.

INSTALLAZIONE

Press the MENU button on the remote control.

Result: The programming menu is displayed.

Press the OK button to select this option.

Result: The INSTALLAZIONEmenu is displayed.

"❷

CAMBIA:❿ SPOSTA:OK

"❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

CANC.:CLR/RST

Press the corresponding

INSTALLAZIONEoption.

❷ꢀor

➛

❿

buttons to select the

Press the corresponding or buttons, until the cursor is

❷

◆

placed in front of the SINTONIA MANUALEoption.

(SV-635X/SV-631X/SV-6315X/SV-6313X)

Press the OK button to select this option.

Result: The INSTALLAZIONEmenu is displayed.

Press the

Result:

❿

button to select this option.

INDICE PROGRAMMI

PR CH

NOME DECODER

The INDICE PROGRAMMI menu is displayed.

INSTALL

1 002 ----

2 005 ----

3 009 ----

4 011 ----

5(025 ----

SINTONIA AUTOMATICA

SINTONIA MANUALE

STANDARD TV

Press the corresponding

placed in front of the SINTONIA MANUALE option.

❷

buttons, until the cursor is

Press the corresponding

or ❷ buttons, until the cursor is

❿

:CH36

:DEC

placed in front of the required preset TV programme.

CANALE VCR OUT

SELEZIONE AV2

Result:

The selected station is displayed at the same time on

the television screen.

❿

)

Press the

Result:

❿

button to select this option.

(SPOSTA:

◆◆

◆

The INDICE PROGRAMMImenu is displayed.

"❷

CONFERMA:OK

To change the programme number assigned to a station (PR5

instead of PR1 for example):

"❷

❿

USCITA:MENU

Press the corresponding

placed in front of the required preset TV station. (PR)

❷

buttons, until the cursor is

◆

Press OK

Press the

◆

or ❷ꢀbuttons until the cursor is placed in front of

◆

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

INDICE PROGRAMMI

the programme to which the station is to be moved

Press OK again

Press the CLR/RST button.

PR CH

NOME DECODER

◆

❿

1(025 ----

2 005 ----

3 009 ----

4 011 ----

5 025 ----

)

Repeat the same procedure from Step

required stations have been cleared.

onwards until all the

Repeat this procedure from Step

stations have been stored.

onwards, until all the required

INSTALL

SINTONIA AUTOMATICA

❿

SINTONIA MANUALE

CANALE VCR OUT

SELEZIONE AV2

On completion, press the MENU button three times to exit the

menu.

:CH36

:DEC

(SPOSTA:

◆◆

◆

On completion, press the MENU button three times to exit the

menu.

"❷

CONFERMA:OK

"❷

❿

USCITA:MENU

INDICE PROGRAMMI

PR CH

NOME DECODER

❿

1 025 ----

2 002 ----

3 005 ----

4 009 ----

5 011 ----

INDICE PROGRAMMI

PR CH

NOME DECODER

❿

1 --- ----

2 --- ----

3 --- ----

4 --- ----

5 --- ----

"❷

CAMBIA:❿ SPOSTA:OK

CANC.:CLR/RST

"❷

CAMBIA:❿ SPOSTA:OK

CANC.:CLR/RST

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the AV2 Connection

Selecting the Cassette Type

If you wish to use the AV2 socket for a PAY TV DECODER, you

must change AV2 to the required position.

If you wish to use the tape counter to display the time remaining on

a cassette, you must indicate the type of cassette inserted.

◆

(SV-635X/SV-631X/SV-6315X/SV-6313X)

◆

(SV-635X/SV-631X/SV-6315X/SV-6313X)

Press MENU on the remote control.

Result:

The programming menu is displayed.

Result:

The programming menu is displayed.

OPTIONS

INSTALL

Press the corresponding

❷ꢀor

➛

❿

buttons to select the

:SI

Press the corresponding

❷ꢀor

➛

❿

buttons to select the

SINTONIA AUTOMATICA

SINTONIA MANUALE

❿

DURATA NASTRO :E180

NORMA COLORE :AUTO

INSTALLAZIONEoption.

FUNZIONIoption.

STANDARD TV

CANALE VCR OUT

SELEZIONE AV2

:CH36

:DEC

IPC

:SI

Press the OK button to select this option.

Result: The INSTALLAZIONEmenu is displayed.

Press the OK button to select this option.

16:9

NICAM

:AUTO

:SI

❿

Press the corresponding

❷

buttons, until the cursor is

"❷

❿

USCITA:MENU

Press the corresponding

❷

buttons, until the cursor is

"❷

❿

USCITA:MENU

placed in front of the DURATA NASTROoption.

placed in front of the SELEZIONE AV2 option.

Press the

➛

❿

buttons as many times as required, until the

◆

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

◆

When...

Press

➛

or ❿, until...

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

correct cassette length is displayed.

E180

E 300

E240

E260

Another VCR or Satellite

receiver is connected to

EXTis displayed.

OPTIONS

the AV2(DECODER/EXT.) socket

INSTALL

:SI

SINTONIA AUTOMATICA

SINTONIA MANUALE

Press MENU twice to exit the menu.

❿

DURATA NASTRO :E180

NORMA COLORE :AUTO

The decoder is connected to

the AV2(DECODER/EXT.) socket

DEC is displayed.

CANALE VCR OUT

SELEZIONE AV2

:CH36

:DEC

IPC

:SI

:AUTO

❿

16:9

On completion, press MENU twice to exit the menu.

"❷

❿

USCITA:MENU

"❷

❿

USCITA:MENU

◆

Selecting the Recording Speed (SV-635X/SV-631X/

SV-6315X/SV-6313X/SV-530X/SV-435X/SV-431X Only)

Switching between the TV and VCR Modes

You can record a cassette at two different speeds:

The TV/VCR button allows you to record one channel with the VCR

while you watch another channel on the TV.

◆

SP (Standard Play)

LP (Long Play)

REPEAT

◆

ype

Recording Time (in SP)

180 mins. or 3 hours

240 mins. or 4 hours

In Long Play modes:

E-180

E-240

E-260

When the VCR indicator is...

Your television...

◆

Each cassette lasts twice as long

The recording is of a slightly lower quality

260 mins. or

The television receives the picture from

the VCR and you can select channels

4 hours and 20 mins.

E-300

300 mins. or 5 hours

To record a cassette...

Press the SPEED button on the

remote control, until...

with the PROG/TRK (

❷) / PROG

(

or ❷) buttons on the VCR or the

remote control.

In standard play mode

In long play mode

SPis displayed.

LPis displayed.

Off (or the VCR is turned off)

The television receives the picture from

your home aerial or cable television

system as it did before you connected

the VCR.

You can then use the programme

) buttons on your television to select

the channels.

(

❷

To switch the VCR indicator on and off, simply press the TV/VCR button.

Download from Www.Somanuals.com. All Manuals Search And Download.

◆

NICAM (SV-635X/SV-631X/SV-6315X/SV-613X Only)

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure.

When this tab has been removed, you cannot record on the tape.

NICAM programmes are divided into 3 types. NICAM Stereo,

NICAM Mono and Bilingual (transmission in another language).

NICAM programmes are always accompanied by a standard mono

sound broadcast and you can select the desired sound.

OPTIONS

If you wish to protect a cassette, break off the tab using a small

screwdriver.

Please refer to page 34.

:SI

DURATA NASTRO :E180

NORMA COLORE

IPC

:AUTO

:SI

:AUTO

:SI

Press MENU on the remote control.

Result: The programming menu is displayed.

To re-record over a protected cassette (safety tab broken), cover

the hole with adhesive tape.

16:9

❿

NICAM

Press the corresponding

❷ꢀor

➛

❿

buttons to select the

"❷

❿

USCITA:MENU

FUNZIONIoption.

Press the OK button to select this option.

Result: The FUNZIONImenu is displayed.

Recording a Programme Immediately

Press the corresponding

❷

buttons, until the cursor is

placed in front of the NICAMoption.

To...

Press

➛

❿, until...

Before recording a programme, you must have preset the corres-

ponding station (unless you are recording via an external video

source). If you have not done so, refer to pages 18 and 19.

◆

(SV-631X/SV-6315X/SV-6313X/

Mono mode

NOis displayed.

◆

(SV-635X)

SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/ SV-2315X/SV-2313X)

NO: Only set at this position to record the

standard mono sound during a NICAM

broadcast if the stereo sound is

distorted due to inferior reception

conditions.

DISP./

DISPLAY

Switch on the television.

To monitor the programme being recorded, select the television

channel reserved for use with your VCR (or the AV input if used).

VOL

PROG/TRK

TRK

PROG

NICAM mode

SIis displayed.

SI: Normally set at this position.

Insert the cassette on which the programme is to be recorded,

with the window visible and the safety tab intact or the opening

covered with adhesive tape.

On completion, press MENU twice to exit the menu.

Result:

The VCR is switched on automatically.

Select:

◆

The station to be recorded using the PROG/TRK (

PROG (

❷) /

❷)

buttons

◆

The AV1, AV2 or AUX (SV-635X/SV-631X/SV-6315X/

SV-6313X/SV-530X/SV-435X/SV-235X only) source using

the INPUT button for a satellite tuner or external video source

◆

Result:

The station number is displayed and the programme

can be seen on the television.

◆

With SV-635X/SV-631X/SV-6315X-SV-6313X/SV-530X/SV-435X/

SV-431X, you can select the recording speed (SP/LP). Press the

SPEED button.

Hold REC ( ) down for a while to start recording.

◆

Result:

The record indicator appears on the television and VCR

display. An index is recorded on the tape (see page 36).

To stop recording, press once.

◆

If the cassette is ejected when you start recording,

check that the safety tab is intact or the opening is

covered with adhesive tape.

If you reach the end of the tape while recording, the

cassette rewinds automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours of

programmes. (LP)

Your VCR stops automatically after the requested length of time.

Switch on the television.

To monitor the programme being recorded, select the television

channel reserved for use with your VCR (or the AV input if used)

Insert the cassette on which the programme is to be recorded,

with the window visible and the safety tab intact or the opening

covered with adhesive tape.

◆

(SV-631X/SV-6315X/SV-6313X/

SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/ SV-2315X/SV-2313X)

Result:

The VCR is switched on automatically.

◆

(SV-635X)

Select:

DISP./

DISPLAY

◆

The station to be recorded using the PROG/TRK (

PROG (

❷) /

❷

)

buttons

◆

The AV1, AV2 or AUX (SV-635X/SV-631X/SV-6315X/

VOL

PROG/TRK

SV-6313X/SV-530X/SV-435X/SV-235X only) source using

the INPUT button for a satellite tuner or external video source

TRK

PROG

Result:

The channel number is displayed and the programme

can be seen on the television.

◆

With SV-635X/SV-631X/SV-6315X-SV-6313X/SV-530X/SV-435X/

SV-431X, you can select the recording speed (SP/LP). Press the

SPEED button.

REPEAT

Hold the REC button ( ) down for a while to start recording.

◆

Result:

The record indicator appears on the television screen

and VCR display. An index is recorded on the tape

(see page 36).

◆

Press the REC button ( ) several times to increase the recording

time in:

◆

30-minute intervals up to four hours

1-hour intervals up to nine hours (LP)

◆

Result:

The length is displayed on the television displays. The

selected programme is recorded for the length of time

requested. At the end of that time, the VCR stops

recording automatically.

DURATA 0:00

IMPOSTA DURATA:

If you wish to cancel the recording before the end, press

VCR STANDBY/ON (STANDBY/ON).

TASTO REC

◆

If the end of the tape is reached while recording:

◆

The recording stops

The VCR automatically turns off

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the ShowView Feature

★

(SV-635X/SV-530X/SV-435X/SV-235X Only)

Before presetting your VCR:

★

Switch on both the television and your VCR

Check that the date and time are correct

Insert the cassette on which the programme is to be

recorded (safety tab intact)

Up to six programmes can be preset.

Press the SHOWVIEW button.

Result: A message is displayed to allow you to enter the

ShowView code.

★

If all six programmes have been set, the message IL

TIMER E’ COMPLETO: CANCELLARE UNA

PROGRAMMAZIONE PER INSERIRNE UNA NUOVAis

displayed. Refer to page 30 if you wish to cancel a preset

recording.

SHOWVIEW

CODICE ---------

Press the numeric buttons to enter the code opposite the pro-

gramme that you wish to record in your television magazine.

CODICE:0-9

CAMBIA:➛

USCITA:MENU

★

If you wish to correct the ShowView code that you are

entering:

★

Press the

cleared

➛

button until the digit to be corrected is

(SV-635X/SV-435X/SV-530X)

★

Enter the correct digit

1/GEN _→SAB

12:01

V/P

PROG

PR GG.INIZIO_→FINE

Press the MENU or Showview button.

Result: The information concerning the programme is displayed.

❿

1 SA1120:30_→21:00SP ON

-- ------:--_→--:---- -

-- ------:-- --:---- -

#❷ ➛❿

★

When using the ShowView function for the first time with

stored stations, the programme number flashes. This one

time, you must enter the station number manually by

pressing the

❷

buttons. Refer to the following page if:

ANNULLA:CLR/RST

★

The programme number or times flash

You wish to modify the programme

★

(SV-235X)

If the programme and times are correct, press the MENU button.

1/GEN _→SAB

12:01

Press the VCR STANDBY/ON (STANDBY/ON) button to activate

the timer.

PROG

PR GG.INIZIO_→FINE

1 SA1120:30_→21:00

-- ------:--_→--:--

-- ------:-- --:--

#❷ ➛❿

V/P

❿

Refer to page 30 if you wish to:

★

Check that your VCR has been programmed correctly

Cancel a preset recording

ANNULLA:CLR/RST

★

The numbers next to each TV programme listing are

ShowView code numbers, which allow you to

programme your videorecorder instantly with the remote

control. Tap in the ShowView code for the programme

you wish to record.

★

(SV-635X)

(SV-530X/SV-435X/SV-235X)

™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system is

manufactured under licence from Gemstar Development Corporation.

STANDBY/ON

VCR STANDBY/ON

SLO

SHUT

Download from Www.Somanuals.com. All Manuals Search And Download.

Modifying ShowView Programming

Using the Quick Programming Feature

★

(SV-635X/SV-530X/SV-435X/SV-235X Only)

The Quick Programming feature allows you to preset the VCR to

record a programme up to one month before that programme is to

be broadcast. Up to six programmes can be preset.

If you wish to correct the programme displayed or modify certain elements, such as the recording

speed, you can do so before you press MENU a second time to confirm.

OPTIONS INSTALL

Press MENU on the remote control.

Result: The programming menu

is displayed.

Press the OK button to select this option.

Result: The PROGRAMMAZIONE

TIMERmenu is displayed.

SV-635X/SV-631X/SV-6315X/

SV-6313X/SV-530X/SV-435X/

SV-431X/SV-235X/SV-231X/

SV-2315X/SV-2313X

CLOCK

BONUS

LANG

If you wish to...

Then...

PROGRAMMAZIONE TIMER

Select an input source other

★ Press the

➛

❿

buttons, until the PRselection flashes.

than the tuner AV1, AV2 or AUX

★ Press the INPUT button one or more times to change the

❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

input source selection.

★

SV-631X/SV-6315X/SV-6313X/

SV-530X/SV-435X/SV-431X/

SV-235X/SV-231X/SV-2315X/

SV-2313X

Result:

The programme number is replaced by:

Insert the cassette and press the

Q-PRO button.

★

(SV-635X/SV-530X/SV-435X)

•

A1, A2 or AU for a satellite tuner or external

video input (used by another VCR for example)

Press

❿

to select the input source.

★

The input source must be selected before changing any

other value.

1/GEN _→SAB

12:01

PROG

PR GG.INIZIO_→FINE

V/P

Select the required station by pressing the

INPUT to select the AV1, AV2 or AUX (SV-635X/SV-631X/

SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X only) input sources.

❷

buttons or

❿

1 SA1120:30_→21:00SP ON

★

-- ------:--_→--:---- -

-- ------:-- --:---- -

#❷ ➛❿

Record a programme every day

★ Press the

displayed.

➛

❿

buttons, until the DAYselection flashes.

(Monday to Sunday) at the same time

❷

buttons, until the DLY(Daily) value is

Press

Select the required day by pressing the

Press to select the recording start time.

Select the required hour value by pressing the

Press to select the minutes.

Select the required minute value by pressing the

to select the recording end time.

11 Select the required recording end time by pressing the

❿

to select the recording day.

❷

buttons.

ANNULLA:CLR/RST

Record a programme every week

★ Press the

➛

❿

buttons, until the DAYselection flashes.

❿

on the same day and at the same time

★ Press the

❷

buttons, until the W-(Week) value is

❷

buttons.

★

(SV-631X/SV-6315X/SV-6313X/SV-431X)

displayed, followed by the required day.

❿

Example: W-SA(Weekly Saturday)

❷

buttons.

1/GEN _→SAB

12:01

PROG

Extend the recording time

Select PDC recording

★ Press the

time.

➛

❿

buttons, until the STOPselection flashes.

10 Press

❿

PR GG.INIZIO_→FINE

❷

buttons to increase or decrease the stop

❿

1 SA1120:30_→21:00SP

-- ------:--_→--:----

-- ------:-- --:----

#❷ ➛❿

or ❷ꢀ

buttons, following the same procedure as when selecting the

recording start time.

★ Press the

displayed.

★

➛

❿

buttons, until the V/Pselection flashes.

★

With SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X/SV-435X/

SV-431X, you can select the recording speed (AUTO/SP/ LP).

a.Press

❷

buttons until the ON or “-” indication is

ANNULLA:CLR/RST

❿

to select the recording speed

Do not select PDC unless you are sure the programme

you wish to record is broadcast with PDC. If you do set

PDC ON (by selecting “ON” in the right - hand column

on the screen), then you must set up the start-time

EXACTLY according to the published TV schedule.

Otherwise the timer recording won’t take place.

b. Press the

or ❷ buttons to switch between the AUTO,

★

(SV-235X)

SP(Standard Play) or LP(Long Play) recording speeds..

With SV-635X/SV-530X/SV-435X/SV-235X, you can select the VPS

or PDC recording mode.

a. Press

b.Press the

mode (marked ON) and the non-VPS/PDC mode (marked

1/GEN _→SAB

12:01

PROG

❿

to select the VPS or PDC(V/P) recording mode.

or buttons to toggle between the VPS or PDC

PR GG.INIZIO_→FINE

1 SA1120:30_→21:00

-- ------:--_→--:--

-- ------:-- --:--

#❷ ➛❿

V/P

❷

❿

Select the recording speed

★ Press the

➛

❿

buttons, until the recording speed selection

★

12 When you have finished, press the MENU button.

(SV-635X/SV-530X/SV-435X only)

flashes.

★ Press the

displayed:

• AUTO(Auto Tape Speed Select) : see page 29

• SP(Standard Play)

13 Press the VCR STANDBY/ON (STANDBY/ON) button to activate

❷

buttons until the correct indication is

the timer.

Result:

ANNULLA:CLR/RST

Before starting recording, the VCR compares the timer

duration with the remaining time on the cassette.

★

(SV-231X/SV-2315X/SV-2313X)

• LP(Long Play)

★

Auto Tape Speed Select (SV-635X/SV-631X/SV-6315X/

SV-6313X/SV-530X/SV-435X/SV-431X Only)

The VCR’s “Auto Tape Speed Select” function compares

the duration of the timer recording to the actual recording

time remaining on the tape loaded. If there is insufficient

tape to complete a timer recording in AUTO mode, the

VCR automatically switches to LP mode to record the

whole programme.

1/GEN _→SAB

12:01

PROG

PR GG.INIZIO_→FINE

1 SA1120:30_→21:00

-- ------:--_→--:--

-- ------:-- --:--

#❷ ➛❿

❿

E.g.

If there is a one hour Timer Recording in AUTO

mode to be started, and only 40 minutes tape

remaining, the VCR will record in SP for 20

minutes and switch to complete the remaining 40

minutes in LP mode.

ANNULLA:CLR/RST

Download from Www.Somanuals.com. All Manuals Search And Download.

Checking a Preset Recording

Playing a Cassette

You can check your preset recordings:

This function allows you to play back any pre-recorded cassette.

★

When you have finished presetting the VCR

OPTIONS INSTALL

Switch on both the television and your VCR.

If you have forgotten which programmes will be

recorded

Insert the video cassette to be played. If the safety tab on the

CLOCK

BONUS

LANG

cassette is intact, press

❿

PROGRAMMAZIONE TIMER

Otherwise, the cassette is played automatically.

Press MENU on the remote control.

Result: The programming menu

is displayed.

Press the OK button to select this option.

Result: The PROGRAMMAZIONE

TIMERmenu is displayed.

SV-635X/SV-631X/SV-6315X/

SV-6313X/SV-530X/SV-435X/

SV-431X/SV-235X/SV-231X/

SV-2315X/SV-2313X

★

When a cassette is loaded, the tape position is optimized

automatically to reduce disturbance (Digital Auto Tracking).

#❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

When playing a cassette, if the end of the tape is reached,

the cassette is rewound automatically.

NTSC tapes can be played back but cannot be recorded

with this VCR.

★

(SV-635X/SV-530X/SV-435X)

★

SV-631X/SV-6315X/SV-6313X/

SV-530X/SV-435X/SV-431X/

SV-235X/SV-231X/SV-2315X/

SV-2313X

1/GEN _→SAB

12:01

PROG

PR GG.INIZIO_→FINE

V/P

To...

Then press...

Press Q-PRO on the remote control.

❿

1 SA1120:30_→21:00SP ON

-- ------:--_→--:---- -

-- ------:-- --:---- -

#❷ ➛❿

Stop the playback

Eject the cassette

(STOP).

★

Press the

❷

buttons to select the required programme.

(EJECT).

Press the

➛

❿

buttons to select and change any values as

required. For more details, refer to the previous page.

ANNULLA:CLR/RST

★ One Touch Play.

For your convenience, you can playback tape with a

simple touch of the (PLAY) button. One Touch Play

On completion, press MENU twice.

❿

★

(SV-631X/SV-6315X/SV-6313X/SV-431X)

can be used even when the power is off but a cassette is

inserted.

1/GEN _→SAB

12:01

PROG

PR GG.INIZIO_→FINE

❿

1 SA1120:30_→21:00SP

-- ------:--_→--:----

-- ------:-- --:----

#❷ ➛❿

Cancelling a Preset Recording

Adjusting Picture Alignment Manually

ANNULLA:CLR/RST

You can cancel any programmes that are:

The Picture Alignment feature allows you to adjust the alignment

manually to obtain the best possible picture.

★

Incorrect

(SV-631X/SV-6315X/SV-6313X/

SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/ SV-2315X/SV-2313X)

(SV-235X)

★

(SV-635X)

No longer required

DISPLA

When noise bars or streaks appear during playback, adjust alignment

DISP./

1/GEN _→SAB

12:01

PROG

Press MENU on the remote control.

Result: The programming menu

is displayed.

Press the OK button to select this option.

Result: The PROGRAMMAZIONE

TIMERmenu is displayed.

manually by pressing the PROG/TRK (

until the picture is clear and stable.

❷

) / TRK ( or

) buttons

SV-635X/SV-631X/SV-6315X/

SV-6313X/SV-530X/SV-435X/

SV-431X/SV-235X/SV-231X/

SV-2315X/SV-2313X

PR GG.INIZIO_→FINE

1 SA1120:30_→21:00

-- ------:--_→--:--

-- ------:-- --:--

#❷ ➛❿

V/P

ADV

❿

Result:

★ The tracking bar appears.

★ The image is adjusted.

★ The tracking bar disappears when you release the button.

TRK

PROG

PROG/TRK

DEX

ANNULLA:CLR/RST

★

SV-631X/SV-6315X/SV-6313X/

SV-530X/SV-435X/SV-431X/

SV-235X/SV-231X/SV-2315X/

SV-2313X

Press Q-PRO on the remote control.

★

(SV-231X/SV-2315X/SV-2313X)

Select the programme to be cancelled by pressing the

buttons.

❷

1/GEN _→SAB

12:01

PROG

PR GG.INIZIO_→FINE

1 SA1120:30_→21:00

-- ------:--_→--:--

-- ------:-- --:--

#❷ ➛❿

Press the CLR/RST button to cancel the selected programme.

❿

Result:

All the recording information is deleted and the broad-

cast will not be recorded.

On completion, press MENU twice.

ANNULLA:CLR/RST

Download from Www.Somanuals.com. All Manuals Search And Download.

Intelligent Picture Control

FORMAT 16:9 (WIDE SCREEN)

The Intelligent Picture Control Feature allows you to adjust the

sharpness of the image automatically, according to your own

preferences.

Your VCR can automatically read a 16:9 signal from the AV2 input

or a prerecorded 16:9 tape. It can broadcast a 16:9 signal through

a 21 pin scart cable.

★

(SV-635X/SV-631X/SV-6315X/SV-6313X)

★

(SV-635X/SV-631X/SV-6315X/SV-6313X)

OPTIONS

During playback, press the MENU button on the remote control.

Result: The programming menu is displayed.

Press MENU on the remote control.

OPTIONS

:SI

Result:

The programming menu is displayed.

DURATA NASTRO :E180

NORMA COLORE :AUTO

DURATA NASTRO :E180

NORMA COLORE :AUTO

IPC

16:9

NICAM

:SI

:AUTO

:SI

Press the corresponding

❷ꢀor

➛

❿

buttons to select the

Press the corresponding

❷ꢀor

➛

❿

buttons to select the

❿

:SI

:AUTO

:SI

❿

16:9

NICAM

FUNZIONIoption.

Press the OK button to select this option.

Result: The FUNZIONImenu is displayed.

Press the corresponding or buttons, until the cursor is

placed in front of the 16:9option.

Press the button to select AUTO★★SI★★NO

Press the OK button to select this option.

Result: The FUNZIONImenu is displayed.

#❷

❿

USCITA:MENU

#❷

❿

USCITA:MENU

❷

Press the corresponding or buttons, until the cursor is

❷

★

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

★

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

placed in front of the IPCoption.

❿

Press the

option.

❿

button to select the IPC (intelligent picture control)

AUTO Set when you use a wide TV. The VCR detects wide TV

programmes and normal TV programmes automatically

when playing back and recording.

OPTIONS

:SI

★

When intelligent picture control mode is SI, the sharpness

of the image is adjusted automatically.

DURATA NASTRO :E180

NORMA COLORE :AUTO

DURATA NASTRO :E180

NORMA COLORE :AUTO

The VCR always plays back and records in the mode

compatible with 16:9 wide screen. Set if the VCR cannot

detect wide TV programmes with “AUTO” set.

IPC

16:9

:SI

:AUTO

❿

IPC

:SI

:AUTO

❿

To adjust the sharpness manually, press the

❷

button to turn the

16:9

IPC mode

Set if you do not use a wide TV.

#❷

❿

USCITA:MENU

Press the

➛

❿

buttons until the picture is displayed according to

#❷

❿

USCITA:MENU

On completion, press MENU twice to exit the menu.

your preferences.

★

If you do not press a button within ten seconds, the

IMMAGINEmenu disappears automatically.

IMMAGINE

Selecting the Colour Mode

On completion, press the MENU button again.

IPC

Before recording or playing back a cassette, you can select the

required system standard.

SOFT

NITIDA

--------- ------

➛❿

SI/NO:❷

Otherwise, the system automatically selects the reception standard

when you select AUTO.

★

(SV-635X/SV-631X/SV-6315X/SV-6313X)

★

When playing back a cassette, the standard is

automatically selected by the VCR.

★

OPTIONS

Intelligent Picture Control (SV-631X/SV-6315X/SV-6313X/SV-530X/

SV-435X/SV-431X/SV-235X/SV-231X/SV-2315X/SV-2313X Only)

★

When you playback an NTSC-recorded tape on this VCR

make a setting on the colour system according to your TV.

If your TV is a PAL system only TV, set NTPB.

If your TV is Multi System TV (NTSC 4.43 compatible), set

NT4.43 and you can record NT4.43.

:SI

DURATA NASTRO :E180

NORMA COLORE :AUTO

IPC

❿

:SI

:AUTO

:SI

The Intelligent Picture Control Feature allows you to adjust the

sharpness of the image automatically according to your own

preferences.

16:9

NICAM

SLOW

Q-PRO

#❷

❿

USCITA:MENU

Press MENU on the remote control.

SHUTTLE

V-LOCK

IPC

Result:

The programming menu is displayed.

During playback, press the IPC button on the remote control.

★

(SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/SV-2315X/SV-2313X)

Press the corresponding

❷ꢀor

➛

❿

buttons to select the

Press the

❷

button to turn the IPC (intelligent picture control)

DISPLAY

FUNZIONIoption.

option SIand NO

Press the OK button to select this option.

Result: The FUNZIONImenu is displayed.

Press the corresponding or buttons, until the cursor is

placed in front of the NORMA COLOREoption.

Press the button to select AUTO★★PAL★★MESECAM★★B/W

CLR/RST

F.ADV

★

When intelligent picture control mode is SI, the sharpness

of the image is adjusted automatically.

OPTIONS

:SI

❷

DURATA NASTRO :E180

NORMA COLORE :AUTO

To adjust the sharpness manually, select intelligent picture control

mode NO

The horizontal picture adjusting appears.

❿

IMMAGINE

IPC

:SI

:AUTO

16:9

❿

★

IPC

NITIDA

AUTO When playing back a cassette, the system standard is

SOFT

--------- ------

Press the

➛

❿

buttons until the picture is displayed according to

#❷

❿

USCITA:MENU

automatically selected by the VCR.

your preferences.

B/W Black and White

➛❿

SI/NO:❷

★

If you do not press a button within ten seconds, the

IMMAGINEmenu disappears automatically.

On completion, press MENU twice to exit the menu.

On completion, press the IPC button again.

Download from Www.Somanuals.com. All Manuals Search And Download.

★

Selecting the Audio Output Mode (SV-635X/SV-631X/

Playing a Cassette in Slow Motion

SV-6315X/SV-6313X/SV-530X Only)

You can select the mode in which the sound is reproduced on the

loudspeakers and AV outputs. The following options are available.

You can play a cassette in slow motion.

★

No sound is heard when playing back a cassette in slow

motion.

PEAT

Option

Description

SLOW

Used to listen to the sound on the left Hi-Fi channel.

Used to listen to the sound on the right Hi-Fi channel.

Press:

★

❿

to start playing the cassette

SLOW

SHUTTLE

V-LOCK

★

SLOW (

increase the speed respectively

o return to the normal speed, press the

) as many times as required to decrease or

MIX

Used to listen to the mixed sound of the Hi-Fi and normal

channels.

★

❿

II button twice.

MONO

L R

Used to listen to the sound on the normal mono channel.

When playing back in slow motion, picture interference may occur.

Press the PROG/TRK (

minimize this effect.

❷

) / TRK (

) buttons to

Used to listen to Hi-Fi stereo sound on the left and right

channels.

★

(SV-631X/SV-6315X/SV-6313X/

SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/ SV-2315X/SV-2313X)

★

(SV-635X)

MIX

★

When playing back tapes recorded in Hi-Fi, the

sound switches to Hi-Fi after five seconds of Mono.

DISPLA

DISP./

★

When you have been using the Slow Motion function for

more than about five minutes, the VCR will automatically

play to protect the:

L R

MONO

ADV

To select the sound mode, simply press the AUDIO button on the remote

control until the required option is displayed.

★ Cassette

★ Video heads

TRK

PROG

PROG/TRK

DEX

Vertical stability: When playing back slow motion,

interference may be seen on the screen. Press the

V-LOCK

V-LOCK (

) buttons to minimize this effect.

Playing a Sequence Frame by Frame

★

Selecting the Audio Mute Mode (SV-435X/SV-431X/

SV-235X/SV-231X/SV-2315X/SV-2313X Only)

You can:

★

Stop the cassette at a given frame (image)

Advance one frame at a time

You can select the mode in which the sound is mute.

REPEAT

★

No sound is heard when playing back frame by frame.

To select the audio mute mode on and off, simply press the AUDIO button

on the remote control.

Press:

★

❿

to start playing the cassette

to stop the tape at a given frame

to advance frame by frame

❿

F.ADV ( ^F.ADV

)

To return to normal playback, press

❿

★

When you have been using the Frame-by-Frame function

for more than about five minutes, the VCR will auto-

matically play to protect the cassette and video heads.

Vertical stability: When playing back frame by frame,

interference may be seen on the screen. Press the

V-LOCK

V-LOCK (

) buttons to minimize this effect.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a Sequence at Variable Speeds

Auto Repeat Play

You can set repeat play to repeat the tape continuously from

beginning to end.

You can vary the playback speed using the Shuttle function (up to

nine times the normal speed).

Example: You wish to analyze a sportsperson’s technique,

movement by movement.

The Shuttle function is available on the Remote control

SLOW

Press MENU on the remote control.

Result:

The programming menu is displayed.

PROG

OPTIONS INSTALL

BONUS

SHUTTLE

V-LOCK

Press the corresponding

❷

➛

❿

buttons to select the

CLOCK

BONUS

LANG

➢

No sound is heard when playing a sequence at variable

speeds.

INSTALLAZIONE RAPIDAoption.

INSTALLAZIONE RAPIDA

Press the OK button to select this option.

Result: The INSTALLAZIONE RAPIDA menu is displayed.

Press:

❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

➢

❿

during playback

SHUTTLE ( ) to play the cassette backwards

SHUTTLE ( ) to play the cassette forwards

SHUTTLE

Press the corresponding

❷

buttons, until the cursor is placed

in front of the RIPETIZIONE PLAYoption.

Each time you press a SHUTTLE (

) button, the speed is

BONUS

AUTO-SPEGNIMENTO :NO

RIPETIZIONE PLAY :NO

RIPETIZ.PARZIALE : 5

To...

Press

➛

or ❿, until...

changed as shown in the following illustration.

❿

REVERSE REVERSE REVERSE

SLOW

MOTION

X1/10

SLOW

MOTION

X1/5

PLAY

Repeat play

SIis displayed.

PLAY

STILL

PLAY

Do not wish to repeat play

NOis displayed.

"❷

❿

USCITA:MENU

On completion, press MENU twice to exit the menu.

Searching for a Specific Sequence

Interval Repeat Play

Each time you record a cassette on this VCR, an “index” is

automatically marked on the tape when recording starts.

You can set interval repeat play to repeat the cassette several times

for special interval.

The Search function allows you to fast-forward or rewind to a

specific index and start playback from that point. Depending on the

direction selected, the indexes are numbered as follows:

INPUT

INDEX

Press MENU on the remote control.

Result:

The programming menu is displayed.

PROG

OPTIONS INSTALL

BONUS

Seq.

Seq. being Next

played Seq.

Press the corresponding

❷

➛

❿

buttons to select the

REPEAT

etc.

CLOCK

BONUS

LANG

INSTALLAZIONE RAPIDAoption.

INSTALLAZIONE RAPIDA

Press the OK button to select this option.

Result: The INSTALLAZIONE RAPIDAmenu is displayed.

➢

This VCR uses a standard indexing system (VISS). As a

result, it will recognize any indexes marked by other

VCRs using the same system and vice versa.

"❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

Press the corresponding or buttons, until the cursor is placed

❷

in front of the RIPETIZ.PARZIALEoption.

INDEX : --

➛

➛ꢀꢀꢀꢀ❿

❿

To...

Press

❿, until...

To search for a specific index, press INDEX.

Press the ➛➛

desired programme is located. Each time you press the

buttons, the number decreases or increases respectively.

BONUS

AUTO-SPEGNIMENTO :NO

RIPETIZIONE PLAY :NO

RIPETIZ.PARZIALE : 5

Interval repeat play

5, 10, 15 is displayed.

(choose repeat time 5 times,

10 times, 15 times)

❿❿

buttons depending on the direction where your

➛➛

❿❿

❿

Result:

The index number is displayed.

Cancel interval repeat play

NOis displayed.

The VCR starts to search for the point you specified with the ➛➛

On completion, press MENU twice to exit the menu.

"❷

❿

USCITA:MENU

❿❿

buttons.

Result: When the index is found, cassette playback starts.

To select interval during playback, press the INPUT/REPEAT

button at the desired start point.

INDEX : - 6

➛➛ꢀꢀ

Result:

“IMPOSTA INTERVALLO DA RIPETERE” is displayed.

➢

You can set an index number up to ±20.

Press the INPUT/REPEAT button one more time at the desired

end point.

Result:

The tape is automatically rewound to the start point.

INTERVALLO DA RIPETERE” is displayed.

“

Download from Www.Somanuals.com. All Manuals Search And Download.

➢

Using the Tape Counter

Connecting an RCA Audio/Video Input Cable (SV-635X/SV-631X/

SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X Only)

The tape counter:

You can connect other audio/video equipment to your VCR using

audio/video cables if the appropriate outputs are available on the

equipment chosen.

➢

Indicates the elapsed time in the play and record modes

(hours, minutes and seconds)

➢

Is reset when a cassette is inserted in the VCR

➢

(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X)

Examples: ➢ You wish to copy a video cassette with the help of a

Allows you to find the beginning of a sequence easily

second VCR (see page 40).

VIDEO

L AUDIO R

➢

You wish to play back and/or copy pictures taken

with a camcorder (see page 40).

AUX

➢

If the remaining time is to be calculated correctly, you

must indicate the type of cassette being used.

➢

Make sure that both the television and the VCR are

switched off before connecting the cables.

0:00:00

Insert a cassette in your VCR.

➢

(SV-631X/SV-6315X/SV-6313X/

SV-530X/SV-435X/SV-431X/SV-235X/

SV-231X/ SV-2315X/SV-2313X)

To set the tape counter to zero at the beginning of a sequence:

➢

(SV-635X)

Connect one end of the RCA audio/video cable into the VIDEO

socket on the front of the VCR.

➢

Press DISP./

or DISPLAY twice to display the counter

Press CLR/RST when you want to set the tape counter to

zero

VCR

Plug the other end of the audio/video cable into the appropriate

output connector on the other system (VCR or camcorder).

IPC

VIDEO

L AUDIO R

To fast-forward or rewind to the sequence at which the counter

was set to zero, simply press ➛➛ or ❿❿

AUX

DISP./

DISPLAY

Connect one end of the RCA audio cable into the AUDIO sockets

on the front of the VCR.

Result:

The VCR stops automatically when the counter

reaches zero.

➢

Take care to respect the colour coding of the left and right

channels.

VOL

PROG/TRK

TRK

PROG

➢

Some VCR information, such as the counter, can be

displayed on the television screen (unless you have

deactivated the OSD mode; refer to page 16).

Plug the other end of the audio cable into the appropriate output

connectors on the other system (VCR, camcorder or Hi-Fi sound

system).

Press DISP./ or DISPLAY:

➢

(SV-435X/SV-235X)

CLR/RST

INPUT

F.ADV

INDEX

➢

Once to display the current function, programme

number, recording speed ^➢(SV-635X/SV-631X/

SV-6315X/SV-6313X/SV-530X/SV-435X/SV-431X only),

date, time and counter

STANDBY/ON

EJECT

➢

Twice to display the counter only

VIDEO

AUDIO

Three times to display the time remaining on the

cassette

AUX

REPEAT

➢

Four times to clear the display

Download from Www.Somanuals.com. All Manuals Search And Download.

➢

Audio Dubbing a Pre-recorded Cassette (SV-635X Only)

Using the Assemble Edit Function

This function allows you to start a new recording at a specific

position on the cassette while maintaining a very smooth scene

change.

With the Audio Dubbing function, you erase the previously

recorded sound and replace it with a new soundtrack from:

Insert the cassette to be edited in your VCR.

VIDEO EDIT

➢

A CD player

Press the ❿ll button to start playback.

A microphone connected to a sound system

A cassette player

When you reach the position from which you wish to start the new

recording, press the❿ll button.

F.ADV

A.DUB

Restriction:

Press the F.ADV (

) button again as often as necessary to

advance frame by frame, until the exact recording position is

located.

Audio dubbing is applicable only to the longitudinal audio track

(normal audio).

While the VCR is in still mode, hold the REC button ( ) down for

➢

a while to activate the Assemble Edit function.

Connect an RCA audio cable to the appropriate output on your

sound system (CD/cassette player for example).

Result:

Record symbol flashes in the display.

STANDBY/ON

EJECT

Select the source from which you wish to record by pressing:

Connect the other end of the RCA audio cable to the audio input

connectors (L, R) on the front of your VCR.

➢

The PROG/TRK (

❷

) / PROG (

❷) buttons for

VIDEO

AUDIO

television channels

AUX

➢

Insert the pre-recorded cassette on which the audio track is to be

replaced, and press the ❿ll to start playback.

The INPUT button for the AV1, AV2 or AUX (SV-635X/

SV-631X/SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X only)

input sources

Search for the Audio Dubbing (ending) point using the SHUTTLE,

and set the counter to 0:00:00 by pressing CLR/RST.

Press the ❿ll button to start recording.

CLR/RST

-/--

F.ADV

INDEX

When you have finished recording, press

➢

Search back slightly beyond the Audio Dub start point using the

Shuttle.

VOL

PROG/TRK

INPUT

Press the ❿ll button.

Recording from Another VCR or Camcorder

REPEAT

Press DUB.

Result:

You can copy a cassette to your VCR from another video source,

such as another VCR or a camcorder.

Your VCR is now in the Audio dubbing Pause

mode.

➢

It is an infringement of copyright laws to copy prerecorded

cassettes or to re-record them in any form without the

permission of the owners of the corresponding copyright.

On the sound system, locate the point on the CD or cassette at

which you wish to start playback.

Example: The track that you wish to record on the cassette.

Connect the VCR, from which the cassette is to be copied, to the

appropriate SCART audio and video input connectors on the rear

of your VCR, as indicated on page 12.

You can also use an RCA audio and video cable to connect the

AUX input on the front of your VCR. (SV-635X/SV-631X/

When you are ready:

➢

Start playback on the sound system

Press REC ( ) on the remote control.

➢

Result:

The soundtrack is replaced on the pre-recorded cassette.

SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X only)

DUB

-0:05:23

10 The audio dubbing will finish when the counter reaches 0:00:00.

The VCR Aux input will remain selected. Use the input select or up

/ down programme keys as required.

Insert a blank cassette in your VCR.

Insert the pre-recorded cassette in the other video source (VCR or

camcorder).

Press the INPUT button to select the appropriate input on your

VCR:

➢

The new sound will be recorded on the normal sound

track of the tape, and the original sound will remain on

the Hi-Fi sound track.

➢

AV1 or AV2 for the SCART input

➢

AUX for the RCA input (SV-635X/SV-631X/SV-6315X/

To hear the new sound and original sound mixed

together, press the Audio button on the remote control

until the MIX option is displayed (see page 34).

SV-6313X/SV-530X/SV-435X/SV-235X only)

Start playing back the cassette to be copied.

Hold REC ( ) down for a while to start recording on your VCR.

➢

When you have finished recording, press

on both VCRs.

➢

If you wish to view the cassette being copied:

➢

Your VCR must be connected as usual to the

television (see page 10 for further details)

Download from Www.Somanuals.com. All Manuals Search And Download.

➢

Using the TV Buttons on the Remote Control

(SV-635X Only)

Auto Power Off

The Auto Power Off feature automatically turns off your VCR if no

signal is received and you do not press any button for the selected

time.

Your VCR remote control will work with Samsung televisions and

compatible brands.

PROG

OPTIONS INSTALL

BONUS

To determine whether your television is compatible, follow the instructions

below.

VCR STANDBY/ON

TV STANDBY/ON

Press MENU on the remote control.

CLOCK

BONUS

LANG

Result:

The programming menu is displayed.

INSTALLAZIONE RAPIDA

Switch your television on.

SLOW

Press the corresponding

❷

➛

❿

buttons to select the

INSTALLAZIONE RAPIDAoption.

Point the remote control towards the television.

❷ꢀꢀ➛❿ꢀꢀ OK

USCITA:MENU

SHUTTLE

VCR

Press the OK button to select this option.

Result: The INSTALLAZIONE RAPIDAmenu is displayed.

Hold down the TV button and enter the two-figure code

corresponding to the brand of your television, by pressing the

appropriate numeric buttons.

DISP./

BONUS

Press the corresponding

❷

buttons, until the cursor is placed

❿

AUTO-SPEGNIMENTO :NO

RIPETIZIONE PLAY :NO

RIPETIZ.PARZIALE : 5

Brand

Codes

Brand

Codes

in front of the AUTO-SPEGNIMENTOoption.

CLR/RST

F.ADV

SAMSUNG

AKAI

GRUNDIG

LOEWE

01 to 06

09, 23

09, 17, 21

PHILIPS

SABA

SONY

THOMSON

TOSHIBA

02, 20, 22

13, 14, 22 to 24

15, 16

13, 14, 24

07, 16 to 19, 21

Press the

interval.

❿

button, until you select the time of Auto Power off

-/--

VOL

PROG/TRK

INPUT

INDEX

NO 2HORA 3HORA

"❷

❿

USCITA:MENU

REPEAT

PANASONIC

08, 23 to 27

On completion, press MENU twice to exit the menu.

Result: If your television is compatible with the remote control, it

is switched off. It is now programmed to operate with the

remote control.

V-LOCK

F.ADV

DISP./

➢

If several codes are indicated for your television brand, try

each one in turn until you find one that works.

CLR/RST

-/--

➢

(SV-635X/SV-530X/SV-435X/SV-235X Only)

Child door Lock System

VOL

PROG/TRK

INPUT

INDEX

➢

When you change the batteries in the remote control, you

must reprogramme the code, following the same procedure.

With this mechanism you can prevent children from harming

themselves or the VCR. It stops fingers and small articles from

entering your VCR.

➢

(SV-635X)

REPEAT

You can then control the television using the following buttons.

Button

Function

SHUTTLE

V-LOCK

VCR

STANDBY/ON

EJECT

TV STANDBY/ON

Used to switch the television on and off.

Used to switch between the TV and VCR modes.

^REWPLAY

F.F

➢

VIDEO

AUDIO

PROG

REC

STOP

AUX

DISP./

TV or VCR

➢

Only the VOL (+ or –

)

and TV STANDBY/ON

buttons are operational in VCR mode.

CLR/RST

-/--

F.ADV

INDEX

➢

(SV-530X)

-/--

Used to enter a two-figure programme number.

Example: For programme 12, press -/-- followed

by numeric buttons 1 and 2.

➢

VOL

PROG/TRK

INPUT

STANDBY/ON

EJECT

REW PLAY

F.F

INPUT

Used to select an external source.

➢

PROG

REC

STOP

VIDEO

AUDIO

AUX

VOL + or –

Used to adjust the volume of the television.

Used to select the required programme.

➢

PROG/TRK

("or❷)

➢

(SV-435X/SV-235X)

DISP./

Used to switch between an external source and

the television tuner.

➢

STANDBY/ON

EJECT

^REWPLAY

F.F

VIDEO

AUDIO

PROG

REC

STOP

The various functions will not necessarily work on all

televisions. If you encounter problems, operate the

television directly.

AUX

➢

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Specifications

Problems and Solutions

Before contacting the Samsung after-sales service, perform the following simple checks.

Design and specifications are subject to change without notice.

Problem

Explanation/Solution

SV-635X/SV-631X/SV-6315X/

SV-435X/SV-431X/SV-235X/SV-231X/

SV-2315X/SV-2313X

No power

➢

Check that the power plug is connected to a wall outlet.

Have you pressed the VCR STANDBY/ON (STANDBY/ON)

button?

MODEL

SV-6313X/SV-530X

Format

Heads

VHS PAL standard

Video: 4 rotary heads

VHS PAL standard

Video: 4 rotary heads (SV-435X/SV-431X)

Video: 2 rotary heads

You cannot insert a video cassette

➢

A video cassette can only be inserted with the window

side up and the safety tab facing you.

(SV-235X/SV-231X/SV-2315X/SV-2313X)

The television programme was not recorded

➢

Check the VCR aerial connections.

Is the VCR tuner properly set?

Check if the safety tab is intact on the cassette.

Hi-Fi audio: 2 rotary heads

Audio/Control: 1 stationary head

Erase: 1 full track erase head

VHF-I, VHF-III, UHF, Interband/

Hyperband

STANDARD B/G

FM azimuth recording

PAL/MESECAM/NT4.43: Down

converted subcarrier phase shifted

direct recording

NTSC PB on PAL TV

SP 23.39 mm/sec

Audio/Control: 1 stationary head

Erase: 1 full track erase head

VHF-I, VHF-III, UHF, Interband/

Hyperband

STANDARD B/G

FM azimuth recording

PAL/MESECAM/NT4.43: Down

converted subcarrier phase shifted

direct recording

NTSC PB on PAL TV

SP 23.39 mm/sec

Timer recording was unsuccessful

➢

Was the VCR STANDBY/ON (STANDBY/ON) button pressed

to activate the timer?

Re-check the recording start/stop time settings.

If there was a power failure or interruption during timer

recording, the recording will have been cancelled.

Receiving channel

➢

Television system

Luminance

Colour system

No playback picture or the picture

is distorted

➢

Check to see if you are using a prerecorded tape.

You cannot see normal broadcasts

Check the TUNER/EXTERNAL setting. It should be on

TUNER.

Check the TV/VCR aerial connections.

Tape speed

LP 11.69 mm/sec

LP 11.69 mm/sec (SV-435X/SV-431X)

SP 3 hours (E-180 Tape)

LP 6 hours (E-180 Tape) (SV-435X/SV-431X)

About 100 sec in REW with E-180

➢

Recording/playback time

REW time

SP 3 hours (E-180 Tape)

LP 6 hours (E-180 Tape)

About 60 sec in REW with E-180

Noise bars or streaks on playback

Press the PROG/TRK (" or ❷) / TRK (

minimize this effect.

)

buttons to

When the

during playback, the still picture

has severe “noise bars” streaks

❿

button is pressed

➢

A still picture may have “noise bars”, depending on the

condition of the tape. Press the PROG/TRK (" or ❷) / TRK

VIDEO

Input

Output

Signal-to-noise ratio

Horizontal resolution

0.5 to 2.0 Vp-p; 75 ohm unbalanced 0.5 to 2.0 Vp-p; 75 ohm unbalanced

(

)

buttons during SLOW motion to minimize this effect.

1.0 ± 0.2 Vp-p; 75 ohm unbalanced

Better than 43 dB (SP)

More than 240 lines

1.0 ± 0.2 Vp-p; 75 ohm unbalanced

Better than 43 dB(SP)

More than 240 lines

Video Head Cleaning

If poor pictures appear on a variety of cassettes, the video

heads may need cleaning. This is not a common problem

and unless it appears, the heads should not be cleaned.

When cleaning the video heads, read all instructions

provided with the head cleaning cassette. Incorrect head

cleaning can permanently damage the video heads.

AUDIO

Input

Output

Wow and flutter (WTD)

Signal-to-noise ratio

Frequency response

-8 dBm, 47 Kohm unbalanced

-8 ± 3 dBm, 1 Kohm unbalanced

0.4% max (SP)

68 dB min (IHF A filter)

20Hz - 20kHz

-8 dBm, 47 Kohm unbalanced

-8 ± 3 dBm, 1 Kohm unbalanced

0.4% max (SP)

If when tuning in your TV to the VCR test

pattern your TV does not find the test pattern

or the pattern when found suffers from

interference, it may be due to the VCR output

channel clashing with the normal TV

transmissions in your area. To prevent this

you will need to change the VCR output

channel in the following way

1. Remove the aerial input plug from the socket marked (aerial

symbol) on the rear of the VCR.

2. Carry out the instructions “Tuning Your Television for the VCR”

(see page 14).

3. Carry out the instructions “Setting the VCR output Channel”

(see page 17), move the channel number several channels

down from the original setting. (example: from 36 to 33).

4. Replace the aerial plug into the socket marked (aerial symbol)

on the rear of the VCR.

5. Re-tune your TV to the VCR again by following instructions

“Tuning Your Television for the VCR” (page 14).

6. If the problem still exists repeat steps 1 to 5 moving several

more channels away from the original setting.

42 dB min (IHF A filter)

Power requirement

Power consumption

Operation temperature

Operation humidity

Weight

230V (AC 50-60 Hz)

Approx. 17 watts

41°F-104°F (5°C-40°C)

10%-75%

230V (AC 50-60 Hz)

Approx. 15 watts

41°F-104°F (5°C-40°C)

10%-75%

3.3 Kg (net)

Dimensions (WxHxD)

360 x 94 x 285 mm

If you are unable to solve the problem after reading the above instructions, note:

➢

The model and serial number on the rear of your VCR

The warranty information

A clear description of the problem

Then contact your nearest SAMSUNG after-sales service.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Frequency Table (System-B/G)

ELECTRONICS

ECNICA AUTORIZZATI SAMSUNG TELEVISORI, VIDEO E PRODOTTI AUDIO

CITTA’

RAGIONE SOCIALE

INDIRIZZO

TELEFONO

LEGENDA

VALLE D’AOSTA

002~012 :CCIR STD VHF

013~020 :ITALY

021~069 :CCIR STD UHF

071~075 :CCIR CABLE

201~241 :CCIR STD CABLE

244~250 :MOROCO

251~255 :BELGUIM

Germany

Spain

Italy

Austria

Switzerlands

Netherlands

Denmark

Finland

Norway

Sweden

Belguim

Greece

Portugal

Slovenia

Croatia

Moroco

Yugoslavia

AOSTA

C.A.T. DI D’Isanto

C.SO IVREA 82/A

0165/364056

TV/VCR/AUD

PIEMONTE

ALESSANDRIA

NOVARA

ARONA (NO)

ASTI

COSTA SERIO

VIA ABBA CORNAGLIA 11

STRADA DAMINA 4/C

VIA XXIV MAGGIO 34

CORSO SAVONA 31

VIA VITTORIO EMANUELE 84

VIA CADUTI SUL LAVORO 3

VIA F. SACCO 9/A

0131/445392

0321/398004

0322/45461

TV/VCR/AUD

C.D. ELETTRONICA

CENTRO ASS. VERBANO

TELEPROGRAM

0141/353182

0172/422236

0171/692888

0172/693276

0172/381270

0125/641497

011/7717033/46

011/4360709

011/9572599

0163/450994

0161/250071

BRA’ (CN)

CUNEO

FOSSANO (CN)

CAVALLERMAGGIORE (CN)

IVREA (TO)

TORINO

TELETECNICA BRAIDESE

BOTTASSO GIULIO

BERTOLA E CONTRATTO Snc

CANELLO FRANCESCO

TELE ANTENNE IVREA

DIAPASON S.N.C.

RATTI Sas

VIDEO TECNICA di Petrilli

A.R.T.E. s.n.c.

DISP CH Band

STD

DISP CH Band

STD

CCIR

DISP CH Band

STD

VIA ROMA 113

VIA G. DI VITTORIO 2

C.SO SVIZZERA 185

LUNGO DORA SIENA 8

VIA PO 10

CORSO MATTEOTTI 218

VIA TRIPOLI 91

002 E02

003 E03

004 E04

V-L

48.25

55.25

62.25

CCIR

060 E60 UHF

061 E61 UHF

062 E62 UHF

063 E63 UHF

064 E64 UHF

065 E65 UHF

066 E66 UHF

067 E67 UHF

068 E68 UHF

069 E69 UHF

783.25

791.25

799.25

807.25

815.25

823.25

831.25

839.25

847.25

855.25

69.25

246 M6

247 M7

248 M8

249 M9

V-H

179.25

187.25

195.25

203.25

211.25

226.25

234.25

242.25

250.25

258.25

Moroco

Belguim

CCIR

Moroco

TORINO

CASCINE VICA-RIVOLI (TO)

SERRAVALLE SESIA (VC)

VERCELLI

005 E05 V-H

006 E06 V-H

007 E07 V-H

008 E08 V-H

009 E09 V-H

010 E10 V-H

011 E11 V-H

012 E12 V-H

175.25

182.25

189.25

196.25

203.25

210.25

217.25

224.25

ELEKTRO di Fiore Francesco

250 M10 V-H

LIGURIA

251 U1

252 U2

253 U3

254 U4

255 U5

V-H

CHIAVARI (GE)

GENOVA

IMPERIA

LA SPEZIA

SAVONA

EMI ELETTRONICA

T.T.S. SNC

P.D. ELECTRONIC

C.A.T. ELETTRONICA

AL.FA. SERVICE SNC

VIA PIACENZA 108

VIA A. RIMASSA 183R

VIA GARESSIO 116

VIA CARRANDO 56

VIA PAGANINI 21R

0185/322464

010/5536076

0183/272495

0187/511110

019/805646

TV/VRC/AUD

TV/VCR/AUD

LOMBARDIA

ARESE (MI)

BERGAMO

BOVISIO M.GO (MI)

BRESCIA

COMO

CREMONA

LECCO

MANTOVA

MELEGNANO (MI)

LODI (MI)

MILANO

VIMERCATE

PAVIA

SONDRIO

TREVIGLIO (BG)

BUSTO ARSIZIO (VA)

VARESE

ARESE SERVICE

MERLA CLAUDIO

VIA MATTEI 48

VIA LONGO 11

VIA DESIO 22

VIA TOSCANA 65

VIA GIULINI 9

02/93581248

035/271959

0362/558421

030/221255

031/279820

0372/38731

0341/366059

0376/321554

02/9834498

0371/412389

02/475609

02/66805833

02/55019838

02/70126892

039/6082592

0382/304160

0342/219466

0363/47946

0331/302563

0332/811630

TV/VCR/AUD

071

072

073

V-L

DITTA CAT Bersani & Morello

TRM ELETTRONICA

ELECTRONIC’S CENTER

S.T.A.R.T. VIDEO HIFI

IMPEL DI NOBILE & C. SNC

TECNOVIDEO SNC

76.25

83.25

90.25

97.25

013

V-L

53.75

62.25

82.25

Italy

014

015

V-L

VIA ORTI ROMANI 16/A

VIA TITO SPERI 9

P.ZZA DE GASPERI 28

VIA P. TOGLIATTI 8

VIA CADAMOSTO 21

VIA L. TOLSTOI 37

VIA PAOLO BASSI 29

VIA C. TACITO 6

VIA P. SOTTOCORNO 52

VIA PELLEGATTA 34/A

VIALE LIBERTA’ 63

VIA BRENNERO 7

VIA C. BATTISTI 17

VIA TORINO 28/A

VIALE BORRI 146

074 Z+1

075 Z+2

201 S01

202 S02

203 S03

204 S04

205 S05

206 S06

016

017

018

019

020

V-H

175.25

183.25

192.25

201.25

210.25

471.25

479.25

487.25

495.25

503.25

511.25

519.25

527.25

535.25

543.25

551.25

559.25

567.25

575.25

583.25

591.25

599.25

607.25

615.25

623.25

631.25

639.25

647.25

655.25

663.25

671.25

679.25

687.25

695.25

703.25

711.25

719.25

727.25

735.25

743.25

751.25

759.25

CAT ELECTRONIC

105.25

112.25

119.25

126.25

133.25

140.25

147.25

154.25

161.25

168.25

231.25

238.25

245.25

252.25

259.25

266.25

273.25

280.25

287.25

294.25

303.25

311.25

319.25

327.25

335.25

343.25

351.25

359.25

367.25

375.25

383.25

391.25

399.25

407.25

415.25

423.25

431.25

439.25

447.25

455.25

463.25

163.25

171.25

ELETTRONICA SERVICE

NUOVA TELESTEREO S.R.L.

TELEMARK SRL

TELE-VIDEO SERVICE

F.G.R. ELECTRONIC SRL

COMPTELECTRO di Mussi

GBP ELETTRONICA

TELEVIDEO SERVICE Snc

S.A.R.T.E. di Marin Eligio

VARESE SERVICE SNC

Italy

021 E21 UHF

022 E22 UHF

023 E23 UHF

024 E24 UHF

025 E25 UHF

026 E26 UHF

027 E27 UHF

028 E28 UHF

029 E29 UHF

030 E30 UHF

031 E31 UHF

032 E32 UHF

033 E33 UHF

034 E34 UHF

035 E35 UHF

036 E36 UHF

037 E37 UHF

038 E38 UHF

039 E39 UHF

040 E40 UHF

041 E41 UHF

042 E42 UHF

043 E43 UHF

044 E44 UHF

045 E45 UHF

046 E46 UHF

047 E47 UHF

048 E48 UHF

049 E49 UHF

050 E50 UHF

051 E51 UHF

052 E52 UHF

053 E53 UHF

054 E54 UHF

055 E55 UHF

056 E56 UHF

057 E57 UHF

CCIR

207 S07 V-H

208 S08 V-H

209 S09 V-H

210 S10 V-H

211 S11 V-H

212 S12 V-H

213 S13 V-H

214 S14 V-H

215 S15 V-H

216 S16 V-H

217 S17 V-H

218 S18 V-H

219 S19 V-H

220 S20 V-H

221 S21 V-H

222 S22 V-H

223 S23 V-H

224 S24 V-H

225 S25 V-H

226 S26 V-H

227 S27 V-H

228 S28 V-H

229 S29 V-H

230 S30 V-H

231 S31 V-H

232 S32 V-H

233 S33 V-H

234 S34 V-H

235 S35 V-H

236 S36 V-H

237 S37 UHF

238 S38 UHF

239 S39 UHF

240 S40 UHF

241 S41 UHF

EMILIA ROMAGNA

BELLARIA (RN)

BOLOGNA

IMOLA

FERRARA

FORLI’

MODENA

PARMA

PIACENZA

RAVENNA

REGGIO EMILIA

RICCIONE (RN)

MASINI PAOLO

M.C.R.

COOP. ELECTRA

NIKAM

RIVA E MAZZA

AUDIO VIDEO CENTER SRL

CHIAPPARINI E MELEGARI

SELE.NORD s.n.c.

L.M.S. SNC

VIA MEDITERRANEO 24

VIA FACCINI 4 C/D

VIA PAMBERA 8/B

VIA BONAFINI 34

VIALE BIDENTE 67

VIA VANDELLI 23/29

VIA SPEZIA 106

VIA NASTRUCCI 14

VIA LANCIANI 78

VIA PREMUDA 38/V

VIA CORTEMAGGIORE 7

0541/347714

051/374989

0542/35814

0532/900938

0543/781380

059/235219

0521/982253

0523/592273

0544/590867

0522/381277

0541/641400

TV/VCR/AUD

RTE SNC

TECNOSERVICE S.N.C.

FRIULI VENEZIA GIULIA

FELETTO (UD)

S. MARTINO AL CODROIPO (UD)

PORDENONE

TRIESTE

UDINE

CM ELETTRONICA SNC

TOP SERVICE

ELETTRONICA PORDENONESE

S.A.E. s.n.c.

VIA G. GALILEI 2

VIA ERMINIA 57

VIA UNGARESCA 3/B

VIA CARPINETO 8/1

P.ZZA 1° MAGGIO 22

0432/572172

0432/909981

0434/366667

040/827960

0432/501479

TV/VCR/AUD

M.Z. ELETTRONICA

VENETO

BELLUNO

MESTRE (VE)

PADOVA

ROVIGO

S. MICHELE (VR)

S. VENDEMIANO (TV)

TREVISO

VICENZA

ROSA’ (VI)

S & B SNC

DIGITAL SNC

VIA FELTRE 192

VIA VERDI 109

0437/942070

041/989407

049/8702346

049/8686200

0425/33797

045/973466

0438/400120

0422/430318

0444/505470

0424/581945

TV/VCR/AUD

FALCARO RENZO

SETES

A.T.I.R. di Marchetti P.I. M.

LABORATORY CENTER

BIGNU’ SNC

MATTIAZZI ALESSANDRO

TODESCO ARMANDO & C. SNC

ELECTRONIC SERVICE SNC

VIA VIGONOVESE 145 ABC

VIA SS.FABIANO e SEBASTIANO 34

VIA CONFALONIERI 15

VIA UNITA’ D’ITALIA 142

VIA LIBERAZIONE 13

V. SCUDETTO di S.Giuseppe 19

VIA TORRETTI 20

QUART. CREMONA 2

TRENTINO A. ADIGE

BOLZANO

GARDOLO TRENTO

TELECROM

ELETTRA S.N.C.

VIA MACELLO 63

VIA BASSA 2/A

0471/971178

0461/961255

TV/VCR/AUD

LAZIO

BRACCIANO (RM)

CASSINO (FR)

CIVITAVECCHIA (RM)

FROSINONE

LATINA

LIDO DI OSTIA (RM)

RIETI

ROMA

CECCHINI GIUSEPPE

VIDEOTECNICA di Bino Russo

R.F. ELETTRONICA

VIA GARIBALDI 25/A

VIA FALAISE 28/30

VIA BRAMANTE 45

VIA ALDO MORO 134

VIA MARCONI 38/40

VIA TRAGHETTI 30

VIA CAVOUR 21

P.ZZA DEI CONDOTTIERI 29

VIA AURELIA 838

VIA SAN SOTERO 36

VIA A. CIALDI 35

V.LE CITTA’ D’EUROPA 817

VIA LAGO D’ANNONE 2/4

VIA U. MATTOCCIA 16

STRADA TEVERINA KM. 2 - 400

06/99804687

0776/23283

0766/35489

0775/270542

0773/697960

06/5694642

0746/482876

06/21703043

06/6636016

06/6380516

06/5127753

06/5294264

0774/381354

06/9626196

0761/251557

TV/VCR/AUD

TELESERVICE Snc

ELETTRONICA MURARO

ASSISTENZA TECNICA di Gregori

CAMPOGIANI MAURIZIO

BENCIVENNI GASTONE

E.C.S. SNC

EL.S.A.R. SNC

PETROSELLI ELSA

ROMA

ROMA/ S. PAOLO

ROMA

ROMA/VILLA ADRIANA

VELLETRI (RM)

VITERBO

S.C.F. SNC DI SCALISE A.

ELETTRONICA VELITERNA sdf

VIDEO SERVICE di Calabrese

058 E58 UHF

059 E59 UHF

767.25

775.25

CCIR

244 M4

245 M5

V-H

Legenda :

TV = TELEVISORI

VCR = VIDEOREGISTRATORI e VIDEOLETTORI

AUD = PRODOTTI AUDIO

La presente lista è aggiornata al 30/04/98 e soggetta a continue variazioni.

Download from Www.Somanuals.com. All Manuals Search And Download.

CITTA’

RAGIONE SOCIALE

UMBRIA

INDIRIZZO

TELEFONO

LEGENDA

FOLIGNO (PG)

PERUGIA

TERNI

TECNOSERVICE SNC

VIDEOLAB dI Tomassoni

NUOVA CEA DI CARLONI

VIA MANCINELLI 1/A

VIA SILVIO PELLICO 13

VIA MONTEGRAPPA 9A/B

0742/344636

075/33154

0744/285841

TV/VCR/AUD

TOSCANA

AREZZO

FIRENZE

GROSSETO

LIVORNO

MARLIA CAPANNORI(LU)

MASSA

PIOMBINO (LI)

PISA

PISTOIA

PONSACCO (PI)

PORTOFERRAIO (LI)

PRATO (PO)

S. MARTINO (SI)

VIAREGGIO

GIUSTINI PRIMO

L.GO 2 GIUGNO 14

VIA ZAMBRINI 21

0575/910882

055/416619

0564/491653

0586/899721

0583/308137

0585/251724

0565/38171

050/553081

0573/367363

0587/732453

0565/916494

0574/462255

0577/318420

0584/942535

TV/VCR/AUD

PUNTO VIDEO di Parigi Federico

VIDEOTECNICA SNC

CIUCCI PERLUIGI

NANNINI ELETTRONICA

SAEC di Coppa

PANNOCCHIA ANTONIO

CALONI & DE NISCO s.n.c.

EMMEPI sdf di Pereira e Sforzi

ELETTRONICA GTE

ELBASAT

VIA C. PAGANICO 5/A

VIA MAGGI 136

VIALE PAOLINELLI 76

VIA RINCHIOSTRA NORD 34

VIA A. GARIBALDI 60/62

VIA M. NELLI 13-15

VIA BONELLINA 16C

V.LE DELLA RIMEMBRANZA 18

LOC. CARPANI 135

VIA DI GALCETI 12/A

VIA DELLA REPUBBLICA 13

VIA AURELIA NORD 98 INT

ACROMA

CENTRO ASSISTENZA HIFI

CASTALDI B. e FAVILLA M. & C.

MARCHE

ANCONA

AUDIOVIDEO SERVICE

PLURITECNICA s.n.c.

C.R.T. di Brilloni e Vecchioni

F.N.T. di Ferroni-Pagliari & C.

CAT SNC

VIA BARILATTI 25

VIA C. ULPIANI 5

VIA DELLA PORTARELLA 45

VIALE ZACCAGNINI 56

VIA CECCHI 25

071/2802050

0736/342635

0733/433951

0734/891995

0721/25608

TV/VCR/AUD

ASCOLI PICENO

CORRIDONIA (MC)

MONTEGRANARO (AP)

PESARO

THIS APPLIANCE IS DISTRIBUTED BY

ABRUZZO

LANCIANO (CH)

L’AQUILA

TERAMO

DI FLORIO ALESSANDRO

C.E.A.C. s.n.c.

BELLONE VITTORIO

D.G.M. ELETTRONICA SNC

VIA S. SPIRITO 40

0872/46000

0862/413363

0861/415745

085/414323

TV/VCR/AUD

VIA F.P. TOSTI 40/A

VIA DELL’AEROPORTO 76/78

VIA ITALIA 202/204

VILLARASPA SP. (PE)

MOLISE

AGNONE (IS)

RICCIA (CB)

CLR ELETTRONICA

TELECOM AUDIO VIDEO SVC

VIALE V. VENETO 44

VIA VITTORIO EMANUELE 67/69

0865/79402

0874/716783

TV/VCR/AUD

CAMPANIA

AVELLINO

BENEVENTO

L.V.E. SNC

TELEART di Di Gioia

EMMEDI ELETTRONICA

BARRA MASSIMO

AUDIO SERVICE

MASTER SERVICE SRL

TECNO SERVICE di De Rosa

MIGLIARDI LUIGI

ERREDIESSE SERVICE SAS

RD ELETTRONICA SERVICE S.A.S.

TELESAT S.N.C.

VIA TEDESCO 304

V.LE PRINCIPE DI NAPOLI 161

VIA G. MATTEOTTI 3

VIA RETTIFILO 12

VIA CATTANEO 4/6

0825/74260

0824/28896

0824/834648

0828/723365

0823/329099

081/5021382

081/5844454

081/8723865

081/5794825

081/5602608

081/980620

089/755700

TV/VCR/AUD

VCR/AUD

ELECTRONICS

MONTESARCHIO (BN)

CAPACCIO SCALO (SA)

CASERTA

ORTA DI ATELLA (CE)

CASORIA (NA)

CAST DI STABIA (NA)

NAPOLI

LACCO AMENO (NA)

SALERNO

VIA TOSCANINI 7/9

VIA NAZ. DELLE PUGLIE 176/A

VIA PLINIO IL VECCHIO 19/29

VIA MASCAGNI 74/76

VIA CALDIERI 124/126

VIA BORBONICA 72

TV/VCR/AUD

F.LLI LAMBERTI A. & G. s.n.c.

VIA G. DEL MERCATO 20/22/24

PUGLIA

BARI

BRINDISI

FOGGIA

A.D. SERVICE SNC

GUARINO COSIMO

PICI ANTONIO

VALECCE SALVATORE

MICROKEY S.R.L.

CISE ELETTRONICA

BRUCOLI ROCCO

A.T.A. SYSTEM SRL

VIA STRADA CALVANI 27-29-31

VIA PROV. SAN VITO 189

VIA G. DORSO 35

VIA FRACCACRETA 13 15 17

VIA B. MAZZARELLA 35/37

VIA V. EMANUELE 33

VIA OBERDAN 70

080/5020006

0831/451522

0881/617949

0881/686742

0832/344440

0836/423500

080/813268

099/7375381

TV/VCR/AUD

Questo apparecchio è fabbricato in conformità al D.M.28.08.95.N.548 ed in

particolare a quanto specificato nell’ Art. 2, comma 1.

AUD/VCR

LECCE

TV/VCR/AUD

MAGLIE (LE)

RUVO DI PUGLIA (BA)

TARANTO

VIA EMILIA 119

BASILICATA

MATERA

POLICORO (MT)

POTENZA

RICCARDI COSIMO

FINOCCHIARO PASQUALE

REMOLLINO E LORUSSO

VIA S. STEFANO 51

V.LE SALERNO 28/4

VIA MESSINA 8/10

0835/333671

0835/972838

0971/444243

TV/VCR/AUD

CALABRIA

CASTROVILLARI (CS)

COSENZA

CARIATI MARINA (CS)

CROTONE (KR)

ARDORE MARINA (RC)

REGGIO CALABRIA

CATANZARO LIDO

TAURIANOVA(RC)

VIBO VALENTIA (CZ)

ABENANTE ALBERICO

PALADINO CARMINE

FRONTERA GIUSEPPE

BALZANO E VELLONE s.n.c.

LAB. 2000 DI G. MURDACA

RADIOTECNICA REGGINA

STM ELETTRONICA

VIA DELLA LIBERTA’ 115

VIA E. DE DONATO 15

VIA FIRENZE 10/12 —- 0347/3446302

VIA 1° MAGGIO 29

VIA FOSCOLO 71

V.LE CALABRIA 68

TRAV. CROTONE 16

VIA CIRCONVALLAZIONE SUD

VIA DE GASPERI 44

0981/27648

0984/481468

0983/968713

0962/21173

0964/629608

0965/592000

0961/34951

0966/643483

0963/45571

TV/VCR/AUD

CIANO GIUSEPPE

AUDIO VIDEO SNC

SICILIA

BAGHERIA (PA)

CALTAGIRONE (CT)

CALTANISSETTA

CAPO D’ORLANDO (ME)

CATANIA

FAVARA (AG)

MENFI (AG)

MESSINA

PALERMO

RAGUSA

SIRACUSA

TRAPANI

AUDIO E VIDEO BRUNO S.

ELETTRONICA VISALCO SDF

AUDIO VIDEO SRL

PROFESSIONAL SERVICE

AVS AUDIO SDF

BACCHI IGNAZIO

MESSINA G. & RIPORTELLA G.

ROMEO GIOVANNA

VIA V. VENETO 38

VIA SARDEGNA 33

091/900795

0933/21339

0934/552111

0941/912818

095/446696

0922/420311

0925/75194

090/774403

091/409438

0932/255855

0931/464429

0923/554157

TV/VCR/AUD

VIA DON MINZONI 52/54

VIA XXVII SETTEMBRE 22/B

VIA SASSARI 2/C

P.ZZA ANGELO GIGLIA 40

VIA MANDORLO 60

VIA S. GIOVANNI BOSCO 8

VIA C. GIANQUINTO 52

C.SO VITTORIO VENETO 568

VIA GORIZIA 43/B

E.C.S. SNC di Barrale

RADIOFRANCO DI GOZZI I.

R.E.I. SERVICE

SURDO MARCO

VIA FIRENZE 38

SARDEGNA

CAGLIARI

LABOR TVC SNC di Atzeni

VIDEOELETTRONICA di Angelucci

IBBA TONINO

CENTRO ASS. GODDI A.

VIDEOTECNICA DI ORTU N.

HIFI CENTER di Pintore

VIA OGLIASTRA 40

VIA SATTA 210/212

VIALE EUROPA 190

VIA P. MASTINO 46

VIA STAZIONE 118

VIA LUCANIA 15

070/285292

0781/660475

0782/42878

0784/33171

0785/43484

0789/22164

0783/300026

079/273155

TV/VCR/AUD

CARBONIA (CA)

LANUSEI (NU)

NUORO

BOLOTANA (NU)

OLBIA (SS)

ORISTANO

SASSARI

LA VIDEO ELETTRONICA snc

TECNOSERVICE SNC di Simula

VIA SARDEGNA 91

VIA GALILEO GALILEI 47

Legenda :

TV = TELEVISORI

VCR = VIDEOREGISTRATORI e VIDEOLETTORI

AUD = PRODOTTI AUDIO

La presente lista è aggiornata al 30/04/98 e soggetta a continue variazioni.

www.samsungvcr.com

AC68-00458A

Download from Www.Somanuals.com. All Manuals Search And Download.

Q See Security Camera QS SERIES User Guide
RCA Flat Panel Television HD50LPW52 User Guide
RCA Portable CD Player RP3013 User Guide
Rockford Fosgate Stereo Amplifier 150S User Guide
Rosewill Network Card RC 400 User Guide
Samsung DVR SVR 470 User Guide
Samsung Microwave Oven 350A4502P648 User Guide
Samsung Telephone SCH i700 Series User Guide
Saturn Automobile 2005 Ion User Guide
Sennheiser Headphones HD 212 Pro User Guide