Samsung CRT Television 29Z6 User Guide

COLOUR  
TELEVISION  
29Z4/34Z4  
29Z6/32Z6/34Z6  
29Z7/32Z7/34Z7  
Owner’s Instructions  
Before operating the unit,  
please read this manual thoroughly,  
and retain it for future reference.  
ON-SCREEN MENUS  
DIGITAL 100Hz  
TELETEXT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG  
Contents  
N FOREWORD  
I
Safety Instructions.........................................................................................  
Caution ..........................................................................................................  
2
2
I
N CONNECTING AND PREPARING YOUR TELEVISION  
I
I
I
I
I
I
I
I
I
I
I
View of Control Panel....................................................................................  
View of Connection Panel .............................................................................  
Infrared Remote Control................................................................................  
Inserting the Batteries in the Remote Control................................................  
Connecting to an Aerial or Cable Television Network ...................................  
Switching Your Television On and Off...........................................................  
Placing Your Television in Standby Mode.....................................................  
Becoming Familiar with the Remote Control .................................................  
Plug & Play Feature.......................................................................................  
Viewing the Demonstration............................................................................  
Choosing Your Language..............................................................................  
5
6
7
8
9
10  
10  
11  
12  
13  
13  
N SETTING THE CHANNELS  
I
I
I
I
I
I
Storing Channels Automatically.....................................................................  
14  
15  
16  
18  
19  
20  
Sorting the Stored Channels .........................................................................  
Storing Channels Manually............................................................................  
Assigning Names to Channels ......................................................................  
Skipping Unwanted Channels .......................................................................  
Fine Tuning Channel Reception....................................................................  
N USING YOUR TELEVISION  
I
I
I
Changing the Picture Standard .....................................................................  
21  
22  
Adjusting the Picture Settings........................................................................  
Extra Picture Settings  
(Scan mode / Digital NR / Tilt / LNA).............................................................  
Setting the Blue Screen.................................................................................  
Selecting the Picture Size..............................................................................  
Freezing the Current Picture .........................................................................  
Changing the Sound Standard ......................................................................  
Adjusting the Sound Settings ........................................................................  
Selecting the Turbo Sound............................................................................  
Extra Sound Settings  
23  
24  
24  
24  
25  
26  
26  
I
I
I
I
I
I
I
(Auto volume / Melody / Pseudo stereo / Virtual surround)...........................  
Selecting the Sound Mode (depending on the model) ..................................  
27  
28  
I
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG  
Contents(continued)  
N USING YOUR TELEVISION (continued)  
I
I
I
I
Setting the Sleep Timer.................................................................................  
Setting and Displaying the Current Time.......................................................  
Switching the Television On and Off Automatically.......................................  
Viewing the Picture In Picture (PIP) : Option.................................................  
29  
30  
31  
32  
N USING THE TELETEXT FEATURE  
I
I
I
I
I
Teletext Feature ............................................................................................  
34  
34  
35  
36  
37  
Displaying the Teletext Information ...............................................................  
Selecting a Page by Number.........................................................................  
Using FLOF to Select a Page........................................................................  
Storing Teletext Pages ..................................................................................  
N ADDITIONAL INFORMATION ON CONNECTIONS  
I
I
I
I
I
I
I
Connecting to the External Input/Outputs......................................................  
Connecting to the DVD Player or Digital Set-Top Box ..................................  
Connecting to the Audio Output ....................................................................  
Connecting to the RCA Input.........................................................................  
Connecting to the S-Video Input....................................................................  
Connecting Headphones...............................................................................  
Viewing Pictures From External Sources ......................................................  
38  
39  
39  
40  
40  
41  
41  
N RECOMMENDATIONS FOR USE  
I
Automatic Degaussing to Remove Colour Patches.......................................  
42  
42  
I
Troubleshooting: Before Contacting Service Personnel................................  
Symbols  
Press  
Important  
Note  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
View of Control Panel(depending on the model)  
ENG  
29Z4/34Z4  
4
5
6
7
1
8
Œ POWER ON/OFF  
9
2
´ REMOTE CONTROL SENSOR  
3
ˇ STANDBY INDICATOR  
¨
ˆ
Ø
INPUT SOURCE SELECTION  
MENU DISPLAY  
29Z6/32Z6/34Z6  
VOLUME INCREASE  
VOLUME DECREASE  
NEXT CHANNEL  
4
5
PREVIOUS CHANNEL  
6
7
8
9
2
1
3
Using the Buttons on the Panel  
If the remote control no longer works or you have lost it, you can use controls on the panel of the  
TV to:  
N Switch on the TV when it is in Standby mode and select channels ( L CH M )  
N Access the menu ( MENU )  
N Adjust the volume ( + VOL  
-
)
N Switch among Video input modes ( TV/VIDEO )  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
View of Connection Panel  
ENG  
Side of the TV  
AUDIO INPUT (R, L)  
VIDEO INPUT  
S-VIDEO INPUT  
HEADPHONE CONNECTOR  
Rear of the TV  
AUDIO/VIDEO MONITOR OUTPUT  
AUDIO/VIDEO INPUT 2  
COMPONENT INPUT 1  
AUDIO/VIDEO INPUT 1  
ANT IN  
AUDIO/VIDEO INPUT 3  
COMPONENT INPUT 2  
75COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK  
SUB-WOOFER SPEAKER OUTPUT  
(29Z7/32Z7/34Z7)  
Available format for Component Inputs; 480i/480p/1080i-60Hz  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Infrared Remote Control  
ENG  
AUTOMATIC SWITCH-OFF/  
TELETEXT STORE  
STILL PICTURE  
VCR OR DVD FUNCTIONS;  
- STOP  
- REWIND  
- PLAY/PAUSE  
- FAST FORWARD  
PIP FUNCTIONS (OPTION);  
- PIP ON/OFF  
PIP  
- INTERCHANGE THE MAIN AND  
SUB PICTURE (SWAP)  
- STILL  
- SIZE SELECTION (SIZE)  
- LOCATION SELECTION  
(LOCATE)  
TELEVISION STAND-BY  
- SCAN  
- SOURCE SELECTION  
(TV/VIDEO)  
- CHANNEL SELECTION (PL/M)  
MAKE THE REMOTE CONTROL  
WORKS FOR TV, VCR, CABLE,  
DVD PLAYER.  
DIRECT CHANNEL SELECTION  
The remote control might not  
be compatible with the TV  
manufactured by another  
company.  
ON-SCREEN DISPLAY/  
TELETEXT REVEAL  
ONE/TWO-DIGIT CHANNEL  
SELECTION/  
TELETEXT PAGE HOLD  
TUNER OR CABLE NETWORK  
SELECTION  
EXTERNAL INPUT SELECTION/  
TELETEXT MODE SELECTION  
(LIST/FLOF)  
NEXT CHANNEL/  
TELETEXT NEXT PAGE  
MENU DISPLAY/  
PROGRAMME SELECTION BY NAME  
VOLUME INCREASE  
VOLUME DECREASE  
TEMPORARY SOUND SWITCH-OFF  
PREVIOUS CHANNEL\  
TELETEXT PREVIOUS PAGE  
TELETEXT DISPLAY/  
MIX BOTH TELETEXT INFORMATION  
AND THE NORMAL BROADCAST  
SOUND MODE SELECTION/  
TELETEXT SUB-PAGE  
PICTURE SIZE/  
PICTURE MENU DISPLAY  
TELETEXT SIZE SELECTION  
PICTURE EFFECT SELECTION  
TURBO SOUND  
SOUND MENU DISPLAY  
(EQUALIZER)  
SOUND EFFECT SELECTION  
FASTEXT TOPIC SELECTION  
The performance of the remote control may be affected by bright light.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Batteries in the Remote Control  
ENG  
You must insert or replace the batteries in the remote control when  
you:  
N Purchase the television  
N Find that the remote control is no longer operating  
correctly  
1
2
Remove the cover on the rear of the remote control by pressing  
the symbol downwards and then pulling firmly to remove it.  
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking  
care to respect the polarities:  
N
N
-
+
on the battery against  
on the battery against  
-
on the remote control  
+ on the remote control  
3
Replace the cover by aligning it with the base of the remote  
control and pressing it back into place.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an Aerial or Cable Television Network  
ENG  
To view television channels correctly, a signal must be received by  
the set from one of the following sources:  
N An outdoor aerial  
N A cable television network  
N A satellite network  
1
2
In the first three cases, connect the aerial or network input cable to  
the 75coaxial socket on the rear of the television.  
Rear of the TV  
If you are using an indoor aerial, you may need to turn it when  
tuning your television until you obtain a picture that is both sharp  
and clear.  
or  
For further details, refer to:  
Cable Television  
Network  
N
Storing Channels Automatically on page 14  
N
Storing Channels Manuallyon page 16  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching Your Television On and Off  
ENG  
The mains lead is attached to the rear of your television.  
1
2
3
Plug the mains lead into an appropriate socket.  
The main voltage is indicated on the rear of the television  
and the frequency is 50 or 60Hz.  
Press the “ ” button (On/Off) on the front of the television.  
Result:  
The Standby indicator on the front of the television  
lights up.  
Press the POWER ( ) button on the remote control to switch the  
television on.  
Result:  
The programme that you were watching last is re-  
selected automatically.  
If you have not yet stored any channels, No clear picture  
appears. Refer to Storing Channels Automaticallyon page  
14 or Storing Channels Manuallyon page 16.  
4
To switch your television off, press the “ ” button (On/Off) again.  
Placing Your Television in Standby Mode  
Your television can be placed in Standby mode, in order to reduce:  
N Power consumption  
N Wear of the cathode ray tube  
The Standby mode can be useful when you wish to interrupt  
viewing temporarily (during a meal, for example).  
1
Press the POWER ( ) button on the remote control.  
Result:  
The screen is turned off and the Standby indicator on  
the front of the television lights up in red.  
2
To switch the television back on, simply press the POWER (  
button again.  
)
Do not leave your television in Standby mode for long  
periods of time (when you are away on holiday, for  
example). Turn your television off by pressing the “  
button (On/Off) on the front of the television. It is best to  
unplug the set from the mains and aerial.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Becoming Familiar with the Remote Control  
ENG  
The remote control is used mainly to:  
N Change channels and adjust the volume  
N Set up the television using the on-screen menu system  
The following table presents the most frequently used buttons and  
their functions.  
PIP  
Button  
Viewing Function  
Menu Function  
Used to display the next  
stored channel.  
Used to select the previous  
menu option.  
P
P
Used to display the  
previous stored channel.  
Used to select the next menu  
option.  
to  
Used to display the corresponding channels.  
-/--  
Used to select a channel numbered ten or over.  
Press this button, and the --symbol is displayed.  
Enter the two-digit channel number.  
Used to decrease the  
volume.  
Used to...  
N Display a submenu  
containing selections for  
the current menu option.  
N Search backwards  
manually for channels  
N Reduce a menu option  
value.  
Used to increase the  
volume.  
Used to...  
N Display a submenu  
containing selections for  
the current menu option.  
N Search forwards  
manually for channels  
N Increase a menu option  
value.  
MUTE  
Used to switch the sound off temporarily.  
To turn the sound back on, press this button again, or  
press the  
-
or  
+
button.  
MENU  
TV  
Used to display the  
on-screen menu system.  
Used to return to the previous  
menu or normal viewing.  
Used to switch the  
television on when it is  
in Standby mode.  
Used to exit from the menu  
system and return to normal  
viewing directly.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plug & Play Feature  
ENG  
When the television is initially powered on, three basic customer  
settings proceed automatically and subsequently: setting the  
language, channel and clock.  
Plug & Play  
1
2
If the television is in Standby mode, press the POWER ( ) button  
on the remote control.  
Ant. Input : Check  
Result:  
The message Plug & Playis displayed. It flickers for  
a little while and then Languagemenu is automatically  
displayed.  
Select  
Exit  
Select the appropriate language by pressing the  
or  
button. Press the MENU button to enter the language.  
Auto store  
: ASIA W/EUROPE  
Area  
Search  
Result: The message Ant. Input : Checkis displayed.  
-
:
/+  
If any language is not selected on the Languagemenu, the  
Languagemenu will disappear about 30 seconds later.  
3
4
Make sure that the antenna is connected to the TV. Press the  
button.  
-
or  
+
Select  
Adjust  
Exit  
Result:  
The Auto storemenu is displayed with Areais  
selected.  
Time  
Select your area by pressing the  
channels, select Searchby pressing the  
-
or  
+
button. To search the  
or button, and  
button. Press the MENU button to stop the  
Clock  
Timer  
: -- : -- am  
: Off  
then press the  
search.  
-
or  
+
Result:  
The Timemenu is displayed with Clockis selected.  
Refer to Storing Channels Automaticallyon page 14.  
Select  
Adjust  
Exit  
5
6
7
Press the  
hour or minute by pressing the  
-
or  
+
button to move to the hour or minute. Set the  
or button.  
Refer to Setting and Displaying the Current Timeon page  
30.  
ENJOY YOUR WATCHING  
When you have finished, press the MENU button.  
Result:  
The message ENJOY YOUR WATCHINGis displayed,  
and then the channel which has been stored will be  
activated.  
Function  
Language : English  
Time  
If you want to reset this feature...  
Plug & Play  
Blue screen  
1
2
Press the MENU button.  
: On  
Demonstration  
Press the  
press the  
or  
button to select Function, and then  
-
or  
+
button.  
Select  
Enter  
Exit  
3
Select Plug & Play by pressing the  
then press the or button.  
or  
button, and  
-
+
Result:  
This feature starts with the message Plug & Play  
is displayed.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the Demonstration  
ENG  
To become familiar with the various menus provided by your  
television, you can view the inbuilt demonstration.  
1
2
Press the MENU button.  
Result:  
The main menu is displayed.  
or button to select Function.  
Press the  
Result:  
The options available in the Functiongroup are  
displayed.  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Demonstration.  
button.  
Function  
Language : English  
Press the  
Result:  
or  
Time  
Plug & Play  
Blue screen  
Each of the menu options is displayed in turn.  
: On  
Demonstration  
When you wish to exit from the demonstration, press the TV  
button on the remote control.  
Select  
Enter  
Exit  
Choosing Your Language  
When you start using your television for the first time, you must  
select the language which will be used for displaying menus and  
indications.  
Function  
Language  
: English  
Time  
Plug & Play  
Blue screen  
1
2
Press the MENU button.  
: On  
Demonstration  
Result:  
The main menu is displayed.  
or button to select Function.  
Press the  
Result:  
Select  
Adjust  
Exit  
The options available in the Functiongroup are  
displayed.  
3
4
Press the  
Result:  
-
or  
+
button.  
The Languageis selected.  
Select the appropriate language by pressing the  
repeatedly.  
-
or  
+
button  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing Channels Automatically  
ENG  
You can scan for the frequency ranges available to you (and  
availability depends on your country). Automatically allocated  
programme numbers may not correspond to actual or desired  
programme numbers. However you can sort numbers manually and  
clear any channels you do not wish to watch.  
Channel  
Auto store  
Manual store  
Name  
Add/Erase  
Fine tune  
Sort  
1
2
Press the MENU button.  
Result:  
The main menu is displayed.  
or button to select Channel.  
Select  
Enter  
Exit  
Exit  
Exit  
Press the  
Result:  
The options available in the Channelgroup are  
Auto store  
displayed.  
Area  
Search  
: ASIA W/EUROPE  
-
:
/+  
3
4
Press the  
Result:  
-
-
or  
+
button.  
The Auto storeis selected.  
Press the  
Result:  
or  
+
button again.  
The options available in the Auto storegroup are  
Select  
Adjust  
displayed with Areais selected.  
5
Select your area by pressing the  
displayed in the following order: ASIA W/EUROPE  
-
or  
+
button. The areas are  
CIS E/EUROPE  
NZ/INDONESIA SOUTH  
Auto store  
-
Area  
: ASIA W/EUROPE  
-
CHINA  
-
HONGKONG U/K  
-
AUSTRALIA  
-
-
-
/+  
Search  
:
AFRICA  
-
AMERICA.  
6
7
Press the  
or  
button to select Search.  
Press the  
Result:  
-
or  
+
button to start the search.  
The horizontal bar is displayed, and then channels are  
stored in an order which reflects their positions in the  
frequency range. Finally, the search will end  
automatically.  
Select  
Search  
P 1  
106 MHz  
7
%
To stop the search before it has finished, press the MENU  
button.  
8
When searching and storing are complete, the Sortmenu is  
displayed.  
N
To sort the stored channels into the desired numerical order,  
go to Step 6 of the Sorting the Stored Channelsprocedure  
on page 15.  
Exit  
N
To exit from the channel store function without sorting the  
channels, press the MENU button repeatedly until the menus  
disappear.  
Sort  
From  
: P 1  
: P--  
: ?  
To  
Store  
9
When the channels have been stored, you can:  
N
N
N
N
N
Sort them in the order required (refer to page 15)  
Assign a name to the stored channels (refer to page 18)  
Clear a channel (refer to page 19)  
Fine tune channel reception if necessary (refer to page 20)  
Activate the Digital Noise Reduction feature (refer to page 23)  
Select  
Adjust  
Exit  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sorting the Stored Channels  
ENG  
This operation allows you to change the programme numbers of  
stored channels. This operation may be necessary after using auto  
store. You can delete the channels you do not want to keep.  
Channel  
Auto store  
Manual store  
Name  
1
2
Press the MENU button.  
Add/Erase  
Fine tune  
Sort  
Result:  
The main menu is displayed.  
or button to select Channel.  
Press the  
Result:  
Select  
Enter  
Exit  
Exit  
Exit  
Exit  
The options available in the Channelgroup are  
displayed.  
Sort  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Sort.  
button.  
From  
To  
: P 1  
: P--  
: ?  
Store  
Press the  
Result:  
or  
The options available in the Sortgroup are displayed  
with Fromis selected.  
Select  
Adjust  
6
7
Select the channel number that you wish to change by pressing  
the or button repeatedly.  
-
+
Sort  
Press the  
or  
button to select To. Select the new channel  
From  
To  
: P 1  
: P 3  
: ?  
number which you wish to identify by pressing the  
repeatedly.  
-
or  
+
button  
Store  
You can also select the channel number directly by pressing  
the numeric buttons (0~9).  
8
9
Press the  
or  
button to select Store. Select OK to confirm  
or button.  
Select  
Adjust  
the exchange of channel numbers by pressing the  
-
+
Result: The selected channel is exchanged with the one  
previously stored to the chosen number.  
Sort  
From  
To  
: P 3  
: P 1  
: OK  
For all the channels to move to the required channel numbers,  
repeat steps 6 to 8 after selecting the Fromby pressing the  
button.  
or  
Store  
Select  
Adjust  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing Channels Manually  
ENG  
You can store up to 100 television channels, including those  
received via cable networks.  
Channel  
Auto store  
When storing channels manually, you can choose:  
Manual store  
Name  
N Whether or not to store each of the channels found  
Add/Erase  
Fine tune  
Sort  
N The programme number of each stored channel which  
you wish to identify  
Select  
Enter  
Exit  
1
2
Press the MENU button.  
Result:  
The main menu is displayed.  
or button to select Channel.  
Manual store  
Colour system  
: Auto  
: BG  
Press the  
Result:  
Sound system  
Search  
: 46MHz  
: C 1  
: P 3  
: ?  
The options available in the Channelgroup are  
Channel  
Prog.No.  
Store  
displayed.  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Manual store.  
button.  
Select  
Adjust  
Exit  
Press the  
Result:  
or  
Manual store  
Colour system  
The options available in the Manual storegroup are  
: Auto  
: BG  
displayed with Colour systemis selected.  
Sound system  
Search  
: 46MHz  
: C 1  
: P 3  
: ?  
6
Indicate the broadcasting standard required by pressing the  
button repeatedly.  
-
or  
+
Channel  
Prog.No.  
Store  
Result:  
The colour standards are displayed in the following  
order:  
Auto  
-
PAL  
-
SECAM  
-
NT4.43  
-
NT3.58.  
Select  
Adjust  
Exit  
7
8
Press the  
or  
button to select Sound system.  
Select the sound standard required by pressing the  
repeatedly.  
-
or  
+
button  
Result:  
The sound standards are displayed in the following  
order:  
BG DK  
-
-
I
-
M.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing Channels Manually (continued)  
ENG  
9
If you know the number of the channel to be stored, see the  
following steps.  
Manual store  
Colour system  
N
N
N
Press the  
Press the  
Press the  
or  
button.  
or  
button to select Channel.  
: Auto  
: BG  
+
Sound system  
Search  
: 46MHz  
: C 1  
: P 3  
: ?  
button to select C(Air channel) or S  
Channel  
Prog.No.  
Store  
(Cable channel).  
N
N
Press the  
+
button.  
or  
Press the  
number.  
button to select indicate the required  
Select  
Adjust  
Exit  
You can also select the channel number directly by  
pressing the numeric buttons (0~9).  
Manual store  
Colour system  
: Auto  
: BG  
If no sound or abnormal sound, re-select the sound standard  
required.  
Sound system  
Search  
: 46MHz  
: C 1  
: P 3  
: ?  
Channel  
Prog.No.  
Store  
10 If you do not know the channel numbers, select Searchby  
pressing the  
search.  
or  
button. Press the  
-
or  
+
button to start the  
Result:  
The tuner scans the frequency range until the first  
channel or the channel that you selected is received  
on your screen.  
Select  
Search  
Exit  
Manual store  
Colour system  
11 To assign a programme number to a channel, select Prog.No.by  
: Auto  
: BG  
pressing the  
or  
button. Press the  
-
or  
+
button to find the  
Sound system  
Search  
correct number.  
: 46MHz  
: C 1  
: P 3  
: ?  
Channel  
Prog.No.  
Store  
12 To store the channel and associated programme number, select  
Storeby pressing the  
to select OK.  
or  
button. Press the  
-
or  
+
button  
Select  
Adjust  
Exit  
13 Repeat Steps 9 to 12 for each channel to be stored.  
Manual store  
Colour system  
Channel mode  
: Auto  
: BG  
Sound system  
Search  
N P (Programme mode): When completing tuning, the  
: 46MHz  
: C 1  
: P 3  
: OK  
broadcasting stations in your area have been assigned to  
position numbers from P00 to max P99. You can select a  
channel by entering the position number in this mode.  
Channel  
Prog.No.  
Store  
N C (Real channel mode): You can select a channel by  
entering the assigned number to each air broadcasting station  
in this mode.  
Select  
Adjust  
Exit  
N S or Z (Cable channel mode): You can select a channel by  
entering the assigned number for each cable channel in this  
mode.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assigning Names to Channels  
ENG  
Channel names will be assigned automatically when channel  
information is broadcast. These names can be changed, allowing  
you to assign new names.  
Channel  
Auto store  
Manual store  
Name  
1
2
Press the MENU button.  
Add/Erase  
Fine tune  
Sort  
Result:  
The main menu is displayed.  
or button to select Channel.  
Press the  
Result:  
Select  
Enter  
Exit  
Exit  
Exit  
The options available in the Channelgroup are  
displayed.  
Name  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Name.  
button.  
P 1 : -----  
P 2 : -----  
P 3 : -----  
P 4 : -----  
Press the  
Result:  
or  
The current channels are displayed.  
6
If necessary, select the channel to be assigned to a new name by  
Select  
Adjust  
pressing the  
or  
button.  
7
8
Press the  
Press the  
-
or  
+
button.  
Name  
P 1 : A----  
P 2 : -----  
P 3 : -----  
P 4 : -----  
or  
button to select a letter (A~Z), a number  
(0~9) or a symbol (  
-
, space). Move on the previous or next letter  
by pressing the or  
-
+
button.  
9
Repeat Steps  
name.  
6
to  
8
for each channel to be assigned to a new  
Adjust  
Move  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Skipping Unwanted Channels  
ENG  
You can exclude the channels you chosen from the channels you  
scanned. When you scan through the stored channels, those you  
have chosen to skip are not displayed.  
Channel  
Auto store  
Manual store  
Name  
All of the channels that you do not specifically choose to skip are  
displayed during scanning.  
Add/Erase  
Fine tune  
Sort  
1
2
Press the MENU button.  
Select  
Enter  
Exit  
Exit  
Exit  
Result:  
The main menu is displayed.  
or button to select Channel.  
Press the  
Result:  
Add/Erase  
P 1 : Added  
The options available in the Channelgroup are  
displayed.  
P 2 : Added  
P 3 : Added  
P 4 : Added  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Add/Erase.  
button.  
Press the  
Result:  
or  
Select  
Adjust  
The stored channels are displayed.  
Add/Erase  
P 1 : Erased  
6
7
Press the  
or button to select the channel to add or erase.  
If necessary, select Addedor Erasedby pressing the  
button.  
-
or  
+
P 2 : Added  
P 3 : Added  
P 4 : Added  
Repeat Step 6 for each channel to be added or erased.  
Select  
Adjust  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fine Tuning Channel Reception  
ENG  
If the reception is clear, you do not have to fine tune the channel,  
as this is done automatically during the search and store operation.  
If the signal is weak or distorted, you may have to fine tune the  
channel manually.  
Channel  
Auto store  
Manual store  
Name  
Add/Erase  
Fine tune  
Sort  
1
2
Press the MENU button.  
Result:  
The main menu is displayed.  
or button to select Channel.  
Press the  
Result:  
Select  
Enter  
Exit  
The options available in the Channelgroup are  
displayed.  
Fine tune  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Fine tune.  
button.  
-
/+  
Tune  
:
Store  
Erase  
: ?  
: ?  
Press the  
Result:  
or  
The options available in the Fine tunegroup are  
displayed with Tuneis selected.  
Select  
Adjust  
Exit  
6
To obtain a sharp and clear picture and good sound quality, press  
the  
-
or  
+
button.  
Fine tune  
Result:  
The horizontal bar is displayed. Move the horizontal  
bars cursor left or right by pressing the  
-
or  
+
button.  
7
8
To memorise adjusted picture or sound, select Store by pressing  
the  
or  
button. Press the  
-
or  
+
button.  
Fine tune  
Result:  
OK is displayed.  
-
/+  
Tune  
:
Store  
Erase  
: OK  
: ?  
To erase adjusted picture or sound, select Erase by pressing the  
or  
button. Press the  
-
or  
+
button.  
Result:  
OK is displayed.  
Select  
Adjust  
Exit  
Fine tune  
-
/+  
Tune  
:
Store  
Erase  
: ?  
: OK  
Select  
Adjust  
Exit  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Picture Standard  
ENG  
You can select the type of picture which best corresponds to your  
viewing requirements.  
Picture  
Mode  
Dynamic  
Adjust  
1
Press the MENU button.  
Scan mode  
Digital NR  
Tilt  
: Natural  
: Off  
Result:  
The options available in the Picturegroup are  
displayed.  
:
0
LNA  
: Off  
2
3
Press the  
Result:  
-
or  
+
button.  
Select  
Adjust  
Exit  
The Modeis selected.  
Select the required picture effect by pressing the  
repeatedly.  
-
or  
+
button  
Picture  
Mode  
Standard  
Result:  
The following picture effects are available:  
Dynamic Standard Movie Custom.  
Adjust  
Scan mode  
Digital NR  
Tilt  
-
-
-
: Natural  
: Off  
:
0
You can also set these options simply by pressing the  
P.STD (Picture Standard) button.  
LNA  
: Off  
Select  
Adjust  
Exit  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Picture Settings  
ENG  
Your television has several settings which allow you to control  
picture quality.  
Picture  
Mode  
Dynamic  
Adjust  
1
Press the MENU button.  
Scan mode  
Digital NR  
Tilt  
: Natural  
: Off  
Result:  
The options available in the Picturegroup are  
displayed.  
:
0
LNA  
: Off  
2
3
4
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Adjust.  
button.  
Select  
Enter  
Exit  
Press the  
Result:  
or  
Adjust  
Contrast  
Brightness  
Sharpness  
Color  
: 100  
The options available in the Adjustgroup are  
displayed.  
:
:
:
:
50  
80  
50  
50  
You can also display this group simply by pressing the  
P.MENU (Picture Menu) button.  
Color tone  
5
Press the  
Brightness, Sharpness, Color, Color toneor Tint-NTSC only)  
to be adjusted. Press the or button.  
or  
button to select the option (Contrast,  
Select  
Adjust  
Exit  
-
+
Result:  
The horizontal bar is displayed. Move the horizontal  
bars cursor left or right by pressing the or button.  
-
+
Contrast  
100  
N If you make any changes to these settings, the picture  
standard is automatically switched to Custom.  
N The television has an automatic degaussingsystem  
that is activated if magnetic interference is present.  
To degauss the television screen, switch power off by  
pressing the “ ” (On/Off) button on the front panel.  
(Refer to Automatic Degaussing to Remove Colour  
Patcheson page 42.)  
Color tone  
Cool  
50  
Warm  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extra Picture Settings  
ENG  
N Scan mode  
You will normally find that scan mode is best set to Natural  
to reduce any slight picture flicker. However, it is possible that  
some occasional broadcasts (NTSC-M) may benefit by  
changing the scan mode. Natural, Digitaland  
Progressivemodes are available.  
Picture  
Mode  
Dynamic  
Adjust  
Scan mode  
Digital NR  
Tilt  
: Natural  
: Off  
:
0
LNA  
: Off  
N Digital NR  
If the signal received by your television is weak, you can  
activate this feature to reduce any static and ghosting that  
may appear on the screen.  
Select  
Adjust  
Exit  
Picture  
Mode  
Dynamic  
N Tilt  
Adjust  
Scan mode  
Digital NR  
Tilt  
If you find that the picture received is slightly tilted to one  
side, you can adjust the tilt setting.  
: Natural  
: Off  
:
0
LNA  
: Off  
N LNA  
This feature is very useful in the situation that the TV is used  
in a weak signal and amplifies the TV signal in the weak  
signal area, but not noise.  
Select  
Adjust  
Exit  
This feature is working only in a weak signal condition, and  
that is memorized on current channel, additional.  
Picture  
Mode  
Adjust  
Dynamic  
Scan mode  
Digital NR  
Tilt  
: Natural  
: Off  
:
0
1
Press the MENU button.  
LNA  
: Off  
Result:  
The options available in the Picturegroup are  
displayed.  
Select  
Adjust  
Exit  
2
3
Press the  
-
or  
+
button.  
Picture  
Select the required option (Scan mode, Digital NR, Tiltor  
LNA) by pressing the or button.  
Mode  
Adjust  
Dynamic  
Scan mode  
Digital NR  
Tilt  
: Natural  
: Off  
4
Press the  
-
or  
+
button to change the setting.  
:
0
N
N
N
N
Scan mode : Natural, Digitalor Progressive  
Digital NR : Offor On (activating)  
Tilt : -7to +7  
LNA  
: Off  
Select  
Adjust  
Exit  
LNA : Offor On (activating)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Blue Screen  
ENG  
If no signal is being received or the signal is very weak, a blue  
screen automatically replaces the noisy picture background.  
Function  
Language : English  
If you wish to continue viewing the poor picture, you must set the  
Blue screenmode to Off.  
Time  
Plug & Play  
Blue screen  
: On  
Demonstration  
1
2
Press the MENU button.  
Result:  
The main menu is displayed.  
or button to select Function.  
Select  
Adjust  
Exit  
Press the  
Result:  
The options available in the Functiongroup are  
displayed.  
3
4
5
Press the  
Press the  
-
or  
+
button.  
button to select Blue screen.  
or  
To activate this feature, select On by pressing the  
-
or  
+
button.  
Selecting the Picture Size  
You can select the picture size which best corresponds to your  
viewing requirements simply by pressing the “P.SIZE” button.  
Depending on the model, the following picture sizes are available:  
N Normal, Zoom1, Zoom2, 16:9.  
(29Z4/34Z4/29Z6/34Z6/29Z7/34Z7)  
N Wide, Panorama, Zoom1, Zoom2, Normal.  
(32Z6/32Z7)  
Freezing the Current Picture  
You can freeze the picture when watching a television programme  
simply by pressing the STILL PICTUREbutton.  
To return to normal viewing, press this button again.  
PIP  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Sound Standard  
ENG  
You can select the type of special sound effect to be used when  
watching a given broadcast.  
Sound  
Mode  
Equalizer  
Custom  
1
2
Press the MENU button.  
Auto volume  
Melody  
: Off  
: On  
: Off  
: Off  
Result:  
The main menu is displayed.  
or button to select Sound.  
Pseudo stereo  
Virtual surround  
Press the  
Result:  
The options available in the Soundgroup are  
Select  
Adjust  
Exit  
displayed.  
3
4
Press the  
Result:  
-
or  
+
button.  
Sound  
The Modeis selected.  
Mode  
Standard  
Equalizer  
Select the required sound effect by pressing the  
repeatedly.  
-
or  
+
button  
Auto volume  
Melody  
: Off  
: On  
: Off  
: Off  
Pseudo stereo  
Result:  
The following sound effects are available:  
Custom Standard Music Movie Speech(SVE).  
Virtual surround  
-
-
-
-
N
SVE : SAMSUNG Voice Enhancement Technic  
Select  
Adjust  
Exit  
You can also set these options simply by pressing the  
S.STD (Sound Standard) button.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Sound Settings  
ENG  
The sound settings can be adjusted to suit your personal preferences.  
Sound  
Mode  
Equalizer  
Custom  
1
2
Press the MENU button.  
Auto volume  
Melody  
: Off  
: On  
: Off  
: Off  
Result:  
The main menu is displayed.  
or button to select Sound.  
Pseudo stereo  
Press the  
Result:  
Virtual surround  
The options available in the Soundgroup are  
displayed.  
Select  
Enter  
Exit  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Equalizer.  
button.  
Equalizer  
R
L
Press the  
Result:  
or  
The options available in the Equalizergroup are  
displayed.  
100 300 1K 3K 10K  
You can also display this group simply by pressing the  
S.MENU (Sound Menu) button.  
Adjust  
Move  
Exit  
6
Select the option to be adjusted by pressing the  
Press the or button to reach the required setting.  
-
or  
+
button.  
If you make any changes to these settings, the sound  
standard is automatically switched to Custom.  
Selecting the Turbo Sound  
This feature suitably emphasizes both higher and lower bands of  
sound (and includes other effects).  
You can enjoy more magnificent and dynamic sound when  
watching music, movie, or other channel simply by pressing the  
TURBObutton.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extra Sound Settings  
ENG  
N Auto volume  
Each broadcasting station has its own signal conditions, and  
so it is not easy for you to adjust the volume every time the  
channel is changed. This feature lets you automatically  
adjust the volume of the desired channel by lowering the  
sound output when the modulation signal is high or by  
raising the sound output when the modulation signal is low.  
Sound  
Mode  
Equalizer  
Custom  
Auto volume  
Melody  
: Off  
: On  
: Off  
: Off  
Pseudo stereo  
Virtual surround  
N Melody  
Select  
Adjust  
Exit  
You can hear clear melody sound when the television is  
powered on or off.  
Sound  
Mode  
Custom  
N Pseudo stereo / Virtual surround  
Equalizer  
Pseudo stereofeature converts a monaural sound signal  
into two identical left and right channels.  
Auto volume  
Melody  
: Off  
: On  
: Off  
: Off  
Pseudo stereo  
Once the Pseudo stereoor Virtual surround is set to  
On or Off, these settings apply to the sound effects such as  
Standard, Music, Movie, and Speech.  
Virtual surround  
Select  
Adjust  
Exit  
Sound  
1
Press the MENU button.  
Mode  
Custom  
Equalizer  
Result:  
The main menu is displayed.  
or button to select Sound.  
Auto volume  
Melody  
: Off  
: On  
: Off  
: Off  
2
Press the  
Result:  
Pseudo stereo  
The options available in the Soundgroup are  
Virtual surround  
displayed.  
Select  
Adjust  
Exit  
3
4
Press the  
-
or  
+
button.  
Select the required option (Auto volume, Melody, Pseudo  
Sound  
stereoor Virtual surround) by pressing the  
or  
Mode  
Custom  
button.  
Equalizer  
Auto volume  
Melody  
: Off  
: On  
: Off  
: Off  
5
To activate each feature, select On by pressing the  
-
or  
+
button.  
Pseudo stereo  
Virtual surround  
Manufactured under license from  
Select  
Adjust  
Exit  
Dolby Laboratories. Dolbyand  
the double-D symbol ( ) are  
trademarks of Dolby Laboratories.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the Sound Mode(depending on the model)  
ENG  
The S.MODEbutton displays/controls the processing and output  
of the audio signal. When power is switched on, the mode is  
automatically preset to either Dual-I or Stereo, depending on  
the current transmission.  
Type of broadcast  
On-screen indication  
Regular broadcast  
(Standard audio)  
MONO (Normal use)  
Regular +  
NICAM Mono  
MONO  
NICAM  
MONO  
(Normal)  
NICAM  
Stereo  
STEREO MONO  
NICAM (Normal)  
NICAM Stereo  
Dual-I ¡ Dual-II ¡ MONO  
NICAM NICAM (Normal)  
NICAM Dual-I/II  
Regular broadcast  
(Standard audio)  
MONO (Normal use)  
A2  
Stereo  
Bilingual or Dual-I/II  
DUAL-I DUAL-II  
STEREO MONO  
Stereo  
(Forced mono)  
N If the receiving conditions deteriorate, listening will be  
easier if the mode is set to the MONO.  
N If the stereo signal is weak and an automatic switching  
occurs, then switch to the MONO.  
N When receiving a mono sound in the AV mode, connect  
to the AUDIO-Linput connector on the panel (front or  
side). If the mono sound comes out only from left  
speaker, press the S.MODE button.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Sleep Timer  
ENG  
You can select a time period of between 30 and 180 minutes after  
the television automatically switches to Standby mode by pressing  
the SLEEPbutton.  
1
Press the SLEEP button on the remote control.  
Result: If the sleep timer is not yet set, Off is displayed.  
If the sleep timer is already set, the screen displays  
the remaining time and then before the television will  
be placed in standby mode.  
PIP  
2
3
Press the SLEEP button repeatedly and cycle through the preset  
time intervals (30, 60, 90, 120, 150, 180).  
Result:  
The television automatically switches to standby mode  
when the timer reaches 0.  
To cancel the sleep timer feature, press the SLEEP button  
repeatedly and select Off.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting and Displaying the Current Time  
ENG  
You can set the televisions clock so that the current time is displayed  
by pressing the DISPLAYbutton. You must also set the time if you  
wish to use the automatic on or off timers.  
Function  
Language : English  
Time  
When pressing the “ ” button (On/Off) on the front of  
the television, the clock setting will be reset.  
Plug & Play  
Blue screen  
: On  
Demonstration  
1
2
Press the MENU button.  
Select  
Enter  
Exit  
Result:  
The main menu is displayed.  
or button to select Function.  
Press the  
Result:  
Time  
The options available in the Functiongroup are  
Clock  
Timer  
: -- : -- am  
: Off  
displayed.  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Time.  
button.  
Press the  
Result:  
or  
Select  
Adjust  
Exit  
The options available in the Timegroup are displayed  
with Clockis selected.  
Time  
Clock  
Timer  
: 11 : 30 am  
: Off  
6
Press the  
hour or minute by pressing the  
-
or  
+
button to move to the hour or minute. Set the  
or button.  
7
8
When you have finished, press the TV button to exit.  
To...  
Press the “DISPLAY” button...  
display the channel information  
display the current time  
remove the display  
Once.  
Twice.  
Select  
Adjust  
Exit  
Three times.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching the Television On and Off Automatically  
ENG  
You can set the On/Off timers so that the television will:  
N Switch on automatically and tune to the channel of your  
Function  
Language : English  
choice at the time you select  
Time  
N Switch off automatically at the time you select  
Plug & Play  
Blue screen  
: On  
Demonstration  
The first step is to set the televisions clock (refer to  
Setting and Displaying the Current Timeon the  
previous page). If you have not yet set the clock,  
the message Set the clock firstis displayed.  
Select  
Enter  
Exit  
1
2
Press the MENU button.  
Time  
Clock  
Timer  
: 11 : 32 am  
: Off  
Result:  
The main menu is displayed.  
Press the  
Result:  
or  
button to select Function.  
The options available in the Functiongroup are  
displayed.  
Select  
Adjust  
Exit  
3
4
5
Press the  
Press the  
-
-
or  
+
or  
+
button.  
button to select Time.  
button.  
Time  
Press the  
Result:  
or  
Clock  
Timer  
: 11 : 32 am  
: On  
The options available in the Timegroup are displayed.  
On time  
: -- : -- am  
: -- : -- am  
Off time  
6
7
Press the  
or  
button to select Timer.  
button to set On  
Press the  
Result:  
-
or  
+
The On timeand Off timeare displayed.  
Select  
Adjust  
Exit  
8
9
Press the  
or button to select On time. Set the time at  
which you wish the television to be switched on automatically.  
Time  
Clock  
: 11 : 33 am  
: On  
N
Press the or button to move to the hour, minute or am/pm.  
-
+
Timer  
Set these by pressing the or button.  
On time  
Off time  
: 06 : 30 am  
: -- : -- am  
Press the  
or  
button to select Off time. In the same  
above, set the time at which you wish the television to be switched  
off automatically.  
Select  
Adjust  
Exit  
Time  
Clock  
: 11 : 33 : 52  
: On  
Timer  
On time  
Off time  
: 06 : 30 am  
: 11 : 00 pm  
Select  
Adjust  
Exit  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the Picture In Picture (PIP) : Option  
ENG  
You can display a sub picture within the main picture of TV program  
or external A/V devices such as VCR or DVD. In this way you can  
watch TV program or monitor the video input from any connected  
devices while watching TV or other video input.  
PIP  
PIP  
: Off  
1
Press the MENU button.  
Result:  
The main menu is displayed.  
Select  
PIP  
Adjust  
Adjust  
Adjust  
Adjust  
Exit  
2
3
Press the  
or  
button to select PIP. Press the  
-
or  
+
button.  
Press the  
Result:  
-
or  
+
button again to set On.  
PIP  
The options available in the PIPgroup are displayed.  
: On  
: TV  
: P 1  
Select  
4
5
Press the  
picture by pressing the  
or  
button to select Select. Find a source of sub  
or button.  
Prog.No.  
Size  
-
+
: Double  
Result:  
The sources are displayed in the following order:  
TV  
-
AV1  
-
AV2  
-
AV3  
-
S-VIDEO.  
Select  
Exit  
Press the  
or  
button to select Prog.No.. If you are  
watching TV program, select the channel that you want to view  
through a sub picture by pressing the or button.  
-
+
PIP  
When the source of the sub picture (Select) is set to TV,  
you can select the channel of the sub picture.  
PIP  
: On  
Select  
Prog.No.  
Size  
: TV  
: P 1  
: Double  
6
Press the  
picture by pressing the  
or  
button to select Size. Select a size of sub  
or button.  
-
+
Result:  
The sizes are displayed in the following order:  
Double Large Small 16 PIP.  
-
-
-
Select  
Exit  
N
16 PIP : You can view up to 16 memorized channels  
on the sub picture spontaneously.  
PIP  
N
On the condition of 16 PIP, it is impossible to execute  
PIP  
: On  
swap, still and locate.  
Select  
Prog.No.  
Size  
: TV  
: P 1  
: Double  
Select  
Exit  
PIP  
PIP  
: On  
Select  
Prog.No.  
Size  
: TV  
: P 1  
: Double  
Select  
Adjust  
Exit  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the Picture In Picture (PIP) : Option (continued)  
ENG  
Easy functions of remote control  
Buttons  
PIP ON  
SWAP  
Feature  
Used to activate or deactivate the PIP function directly.  
Used to interchange the main picture and the sub picture.  
When the main picture is in the Video mode and the  
sub picture is in the TV mode, you might not hear the  
sound of main picture when pressing the SWAP  
button after changing the sub picture channel. At this  
time, reselect the channel of main picture.  
PIP  
STILL  
SIZE  
Used to select the channel of sub picture.  
Used to select a size of sub picture (Double, Large,  
Small, or 16 PIP).  
PL/M  
Used to select the channel of sub picture.  
LOCATE  
SCAN  
Used to move the sub picture counterclockwise.  
Used to scan every memorized channel in order. To stop  
scanning, press it again.  
TV/VIDEO  
Used to assign a source of sub picture (TV, AV1, AV2,  
AV3, or S-VIDEO).  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext Feature  
ENG  
Most television channels provide written information services via  
teletext. Information provided includes:  
N
N
N
N
Television programme times  
News bulletins and weather forecasts  
Sports results  
Travel information  
This information is divided into numbered pages (see diagram).  
Part  
Contents  
A
B
C
D
E
F
Selected page number.  
Broadcasting channel identity.  
Current page number or search indications.  
Date and time.  
Text.  
Status information.  
FASTEXT information.  
Teletext information is often divided between several  
pages displayed in sequence, which can be accessed by:  
N Entering the page number  
N Selecting a title in a list  
N Selecting a coloured heading (FASTEXT system)  
Displaying the Teletext Information  
You can display Teletext information at any time on your television.  
For Teletext information to be displayed correctly,  
channel reception must be stable; otherwise:  
N Information may be missing  
N Some pages may not be displayed  
1
2
Select the channel providing the Teletext service using the  
button.  
or  
Press the TTX/MIX button to activate the teletext mode.  
Result:  
The contents page is displayed. It can be redisplayed  
at any time by pressing the (index) button.  
3
4
If you wish to display the actual broadcast at the same time as  
the teletext page, press the TTX/MIX button again.  
Press the TTX/MIX button again to exit from the teletext display.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Page by Number  
ENG  
You can enter the page number directly by pressing the numeric  
buttons on the remote control.  
1
Enter the three-digit page number given in the content by pressing  
the corresponding numeric buttons.  
Result:  
The current page counter is incremented and the  
page is then displayed.  
2
If the selected page is linked with several secondary pages, the  
secondary pages are displayed in sequence. To freeze the display  
on a given page, press the  
resume.  
(hold). Press the  
(hold) again to  
Using the various display options:  
To display...  
Press the...  
N
Both teletext information and  
the normal broadcast  
TTX/MIX twice  
N
Hidden text  
(reveal)  
(answers to quiz games, for example)  
N
N
The normal screen  
(reveal) again  
(sub-page)  
A secondary page,  
by entering its 4-digit number  
N
N
The next page  
(page up)  
The previous page  
(page down)  
N
Double-size letters in the:  
Upper half of the screen  
Lower half of the screen  
(size)  
Once  
Twice  
N
Normal screen  
Three times  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using FLOF to Select a Page  
ENG  
The various topics included in the teletext pages are color-coded,  
and can be selected by pressing the colored buttons on the remote  
control.  
1
2
Display the teletext contents page by pressing the TTX/MIX  
button.  
Press the coloured button corresponding to the topic that you  
wish to select;the available topics are given on the status line.  
Result:  
The page is displayed with other coloured information  
that can be selected in the same way.  
3
4
To display the previous or next page, press the corresponding  
coloured button.  
To display the subpage, see the following steps.  
N
Press the  
Result:  
(sub-page) button.  
The available subpages appear.  
N
Select the required sub-page. Sub-pages can be scrolled by  
using the or button.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing Teletext Pages  
ENG  
You can store up to four teletext pages to display them later at  
leisure.  
1
Select the LIST mode using the  
button.  
Result:  
Four 3-digit numbers are displayed in different  
colours.  
The  
FLOF modes.  
button is used to switch between the LIST and  
2
Press the coloured button corresponding to the page that will be  
replaced.  
3
4
Enter the new page number using the numeric buttons.  
Repeat steps  
2
and  
3
for each page to be stored, using a  
different coloured button each time.  
5
Press the  
(store) button until the corresponding blocks blink.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to the External Input/Outputs  
ENG  
VCR  
Rear of the TV  
x
y
Decoder /  
Video game device  
Video disc player  
Satellite receiver  
z
N
MONITOR OUTis used for the audio/video output of current television programme.  
x
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to AV-2 INPUT”  
and the target VCR to MONITOR OUTso that you can redirect the signal from AV-2 INPUTto  
MONITOR OUT”  
.
y
z
If you have a decoder, connect the decoder to the VCR and the VCR to the television.  
When you wish to record a programme, connect the receiver to AV-2 INPUTand the VCR to MONITOR  
OUTso that you can redirect the signal from AV-2 INPUTto MONITOR OUT”  
.
Whenever you connect an audio or video system to your  
television, ensure that all elements are switched off.  
Refer to the documentation supplied with your equipment  
for detailed connection instructions and associated safety  
precautions.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to the DVD Player or Digital Set-Top Box  
ENG  
Rear of the TV  
DVD  
Digital Set-Top Box  
N
Connect the RCA Cable to Land Ron the rear of your television and the other end to Audio Out”  
connector of the DVD player or Digital Set-Top Box. Connect the RCA Cable to Y, PB, and PRon  
the rear of your television and the other end to the Component Video Out (Y, PB, PR)connectors of the  
DVD player or Digital Set-Top Box.  
N
N
If you wish to connect both the DVD player and Digital Set-Top Box, you should connect the Digital Set-  
Top Box to the Component1 Inputand connect the DVD player to the Component2 Input.  
Only black signal is output from a monitor in Componet1 or Componet2 mode.  
Connecting to the Audio Output  
Rear of the TV  
The MONIOR OUT(AUDIO) connectors are used  
for equipment, such as an audio system (to take full  
advantage of the Surround sound effect).  
Audio system  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to the RCA Input  
ENG  
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,  
such as camcorders, video disc players, and some video game devices.  
Camcorder  
Side of the TV  
Video game device  
Video disc player  
Connecting to the S-Video Input  
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment  
with an S-Video output, such as a camcorder or VCR.  
Side of the TV  
x
Camcorder  
VCR  
and  
x
To play pictures and sound, both the S-VIDEO and RCA connectors must be used.  
When both the side and rear connectors are connected to  
external equipments, the side connectors receives priority.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Headphones  
ENG  
You can connect a set of headphones to your television if you wish  
to watch a television programme without disturbing the other  
people in the room.  
Side of the TV  
1
2
Plug a set of headphones into the 3.5 mm mini-jack socket of the  
television.  
Result:  
The sound is heard through the headphones.  
When you wish to hear the sound through the speakers again,  
simply disconnect the headphones.  
Prolonged use of headphones at a high volume may  
damage your hearing.  
Viewing Pictures From External Sources  
Once you have connected up your various audio and video  
systems, you can view different sources by selecting the  
appropriate input.  
1
2
Check that all the necessary connections have been made.  
Switch your television on, then press the VIDEO button  
repeatedly.  
Result:  
The input sources are displayed in the following  
order:  
AV1  
-
AV2  
-
AV3  
-
S-VIDEO  
-
Component1  
-
Component2.  
Depending on the source selected, the pictures may appear  
automatically.  
N To watch television programmes again, press the TV  
button and select the number of the channel required.  
N If you press the VIDEO button watching television  
programmes, your television is switched the last  
external input.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatic Degaussing to Remove Colour Patches  
ENG  
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the  
television manually.  
If you move the television to a different position and color patches appear on the screen, you must:  
N Switch the television off by pressing the “ ” (On/Off) button on the front panel  
N Unplug the television from the wall socket  
N Leave the television power-off for about 30 minutes so that the automatic degauss function  
can be activated, and then press the POWER button on the remote control.  
If your television will be left unattended, press the “ ” (On/Off) button to turn your  
television off.  
Troubleshooting: Before Contacting Service Personnel  
Before contacting Samsung after-sales service, perform the following simple checks.  
If you cannot solve the problem using the instructions below, note the model and serial number of the  
television and contact your local dealer.  
No sound or picture  
N
N
Check that the mains lead has been connected to a wall socket.  
Check that you have pressed the “ ” button (On/Off) and the  
POWER ( ) button.  
N
N
Check the picture contrast and brightness settings.  
Check the volume.  
Normal picture but no sound  
N
N
Check the volume.  
Check whether the volume MUTE button on the remote control has  
been pressed.  
No picture or black and white picture  
Sound and picture interference  
N
N
Adjust the colour settings.  
Check that the broadcast system selected is correct.  
N
N
N
Try to identify the electrical appliance that is affecting the television,  
then move it further away.  
Plug your television into a different mains socket.  
Blurred or snowy picture,  
distorted sound  
Check the direction, location and connections of your aerial.  
This interference often occurs due to the use of an indoor aerial.  
Remote control malfunctions  
N
N
N
Replace the remote control batteries.  
Clean the upper edge of the remote control (transmission window).  
Check the battery terminals.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
ENG  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
-
AFTER SALES SERVICE  
-
Do not hesitate to contact your retailer or service  
agent if a change in the performance of your product  
indicates that a faulty condition may be present.  
ELECTRONICS  
AA68-02452A-01 (ENG)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pyramid Technologies Car Video System MV7MN User Guide
Radio Shack Cordless Telephone 43 683 User Guide
Radio Shack Cordless Telephone ET 545 User Guide
Samsung Cell Phone SPH m540 User Guide
Samsung Microwave Oven SMH7178STE User Guide
Samsung Stereo System AH68 01236A User Guide
Samsung Water Dispenser GT P7510 User Guide
SanDisk DVR Video Memory Card Recorder User Guide
Sanyo Camcorder VM PS120P User Guide
Senco Nail Gun Nail Gun User Guide