43-1045.fm Page 1 Tuesday, August 17, 1999 10:58 AM
Cat. No. 43-1045
OWNER’S MANUAL
Please read before using this equipment.
ET-545
25-Channel Caller ID
Cordless Telephone
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 3 Tuesday, August 17, 1999 10:58 AM
Redial — redials the last number di-
aled, with the touch of a button.
For the ET-545’s Caller ID memory
dial feature to operate, you must re-
ceive the caller’s number.
Page — lets you send a paging signal
from the base to the handset to help
locate a misplaced handset or page
someone at the handset.
Warning: To prevent fire or shock
hazard, do not expose this product
to rain or moisture.
Touch Tone or Pulse (Rotary) Dial-
ing — lets you connect your phone to
either type of service.
CAUTION
RISK OF ELECTRIC SHOCK.
!
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
Please read this Owner’s Manual
carefully so you can enjoy all of your
telephone’s features.
We recommend you record the
phone’s serial number here. The num-
ber is on the bottom of the base.
This symbol is intended to alert you
to the presence of uninsulated dan-
gerous voltage within the product’s
enclosure that might be of sufficient
magnitude to constitute a risk of
electric shock. Do not open the
product’s case.
Serial Number: ______________
This telephone has been tested and
found to comply with all applicable UL
and FCC standards.
This symbol is intended to inform
you that important operating and
maintenance instructions are in-
cluded in the literature accompany-
ing this product.
!
Important Caller ID
Information
Important: Cordless phones such as
this one require AC power to operate.
When the AC power is off, you cannot
dial out or receive incoming calls us-
ing your ET-545. For this reason, the
ET-545 cordless phone should not be
your only telephone. To be safe, you
should also have a phone that does
not require AC power to operate (not a
cordless phone) so you can still make
and receive calls if there is an AC
power failure.
To use the System’s Caller ID fea-
tures, you must be in an area where
Caller ID service is available and you
must subscribe to that service.
Where Caller ID is offered, one or
more of the following options are gen-
erally available:
• Caller’s number only
• Caller’s name only
• Caller’s name and number
3
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 4 Tuesday, August 17, 1999 10:58 AM
Your ET-545 operates on standard ra-
dio frequencies, as allocated by the
FCC. Therefore, it is possible for other
radio units operating on similar fre-
quencies, within a certain area, to in-
advertently intercept your conversa-
tions and/or cause interference on
your cordless telephone. This lack of
privacy can occur with any cordless
telephone.
FCC STATEMENT
This telephone complies with Part 68
of FCC Rules. You must, upon re-
quest, provide the FCC registration
number and the REN to your phone
company. These numbers are on the
bottom of your phone’s base.
Note: You must not connect your
phone to any of the following:
• Coin-operated systems
• Party-line systems
READ THIS BEFORE
INSTALLATION
• Most electronic key phone sys-
tems
We have designed your telephone to
conform to federal regulations, and
you can connect it to most telephone
lines. However, each device that you
connect to the phone line draws pow-
er from the phone line. We refer to this
power draw as the device’s ringer
equivalence number, or REN. The
REN is on the bottom of your phone’s
base.
If you are using more than one phone
or other device on the line, add up all
the RENs. If the total is more than five,
your phone might not ring. In rural ar-
eas, a total REN of three might impair
ringer operation. If ringer operation is
impaired, remove a device from the
line.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 5 Tuesday, August 17, 1999 10:58 AM
CONTENTS
Preparation ........................................................................................................... 6
Selecting a Location ........................................................................................ 6
Connecting the Base ....................................................................................... 6
Connecting the Battery Pack .......................................................................... 7
Charging the Battery Pack .............................................................................. 7
Setting the Dialing Mode ................................................................................. 9
Storing an Area Code ..................................................................................... 9
Phone Operation ................................................................................................ 10
Making/Answering a Call .............................................................................. 10
At the Base ............................................................................................. 10
Away from the Base ............................................................................... 10
Reducing Interference ................................................................................... 11
Using REDIAL ............................................................................................... 11
Using FLASH/DEL ........................................................................................ 12
Using Tone Services on a Pulse Line ........................................................... 12
Using PAGE .................................................................................................. 12
Memory Dialing ............................................................................................. 13
Storing a Name and Number in Memory ................................................ 13
Entering a Pause in a Memory Number ................................................. 15
Reviewing Numbers Stored in Memory .................................................. 15
Dialing a Stored Number ........................................................................ 15
Deleting a Number from Memory ........................................................... 16
Storing/Chain Dialing Service Numbers ................................................. 16
Testing Stored Emergency Numbers ...................................................... 16
Caller ID Operation ............................................................................................ 17
Caller ID Displays ......................................................................................... 17
Reviewing Caller ID Records ........................................................................ 18
Dialing Numbers from a Caller ID Record ..................................................... 18
Deleting Caller ID Records ........................................................................... 19
VIP Call List .................................................................................................. 19
Storing Records in the VIP Call List ....................................................... 19
Reviewing the VIP Call List .................................................................... 20
Deleting Records from the VIP Call List ................................................. 20
Dialing a Number from the VIP Call List ................................................. 20
Troubleshooting ................................................................................................ 21
Care and Maintenance ...................................................................................... 23
Replacing the Battery Pack ........................................................................... 24
The FCC Wants You to Know ....................................................................... 24
Lightning ....................................................................................................... 25
5
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 6 Tuesday, August 17, 1999 10:58 AM
PREPARATION
SELECTING A
LOCATION
CONNECTING THE BASE
Follow these steps to set up and con-
nect the base.
Select a location for the telephone that
is:
• Near an AC outlet
• Near a telephone line jack
• Out of the way of normal activities
illus
• Away from electrical machinery,
electrical appliances, and metal
walls or filing cabinets
• Away from wireless intercoms,
alarms, and room monitors
1. Plug one end of the supplied mod-
ular cord into the TEL. LINE jack
on the back of the base.
The base’s location affects the phone’s
range. If you have a choice of several
locations, try each to see which pro-
vides the best performance.
2. Plug the modular cord’s other end
into a modular phone line jack.
Note: If the phone line jack is not a
modular jack, you can update the wir-
ing yourself, using jacks and adapters
available at your local RadioShack
store. Or, you can let the phone com-
pany update the wiring for you. The
USOC number of the jack to be in-
stalled is RJ11C.
3. Plug the supplied AC adapter’s
barrel plug into the 12V DC jack on
the back of the base.
4. Plug the adapter into a standard
AC outlet.
5. Fully extend the base’s antenna
and place it in a vertical position.
Caution: You must use a 120V AC/
12V DC adapter that delivers at least
200 milliamps. Its center tip must be
positive, and its plug must correctly fit
the phone’s 12V DC jack. The supplied
adapter meets these requirements.
Using an adapter that does not meet
these requirements could damage the
phone or the adapter.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 7 Tuesday, August 17, 1999 10:58 AM
CONNECTING THE
BATTERY PACK
CHARGING THE
BATTERY PACK
Before you use your phone for the first
time, you must connect the battery
pack in the handset and charge it for
about 15 hours.
Charge the battery pack by placing
the handset on the base so the
CHARGE/TALK indicator lights. Let
the battery pack charge for about 15
hours.
Slide off the battery compartment cov-
er on the back of the handset. Con-
nect the battery pack’s plug to the pins
inside the compartment. Then replace
the cover.
handset and
CHARGE/
TALK indicator
on base
illus
You can recharge the battery pack at
any time, but be sure to recharge it
when LOW BATT on the handset
lights.
illustration
of LOW
BATT
indicator
location
7
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 8 Tuesday, August 17, 1999 10:58 AM
Notes:
POWER
ON
while
• You can set
to
the battery pack charges.
Illus of contacts on
both the handset
and the base
illus
• The first time you use your phone
after charging a new battery pack,
the handset might not work and
might sound an error tone when
• About once a month, fully dis-
charge the battery pack by keep-
ing the handset off the base until
LOW BATT lights. Then return the
handset to the base and fully
recharge the battery pack. If you
do not fully discharge and
recharge the battery pack periodi-
cally, it loses its ability to fully
recharge.
TALK
you press
. This might also
occur when you recharge a bat-
tery pack that has been com-
pletely discharged.
If this happens, return the handset
to the base for 5 seconds with
POWER
ON
. This resets the
set to
automatic security access code.
• If the CHARGE/TALK indicator
does not light when you place the
handset on the base, be sure the
battery pack is connected to the
pins inside the handset’s battery
compartment and the AC adapter
is securely connected to the base.
• To avoid damage to the battery
pack, always recharge the hand-
set before battery power grows
too weak to light the LOW BATT
indicator.
• If you are not going to use your
phone for an extended period of
time, disconnect its battery. This
helps to increase the battery’s
usable life.
Also, check the charging contacts
on the handset and base. If the
contacts on the base are dirty or
tarnished, gently clean them with
a small brush. If the contacts on
the handset are dirty or tarnished,
clean them with a pencil eraser.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 9 Tuesday, August 17, 1999 10:58 AM
If the dial tone continues, you
TONE/
SETTING THE DIALING
MODE
have pulse service. Set
PULSE PULSE
to
.
TONE/PULSE
Set
on the back of the
base for the type of service you have.
If you are not sure which type you
have, once the battery is charged, do
this test.
STORING AN AREA
CODE
To quickly dial local calls using the
Caller ID and stored number features,
you need to store your local area code
in the system. Then, when you dial a
POWER
ON
1. Set
2. Set
to
.
TONE/PULSE
TONE
.
to
DIAL
DIAL 1+
, the ET-545
call using
or
skips the area code if it matches the
one you stored.
illus
Note: You must store your local area
code or the phone will not dial more
than 7 digits when you dial numbers
from a Caller ID record.
FLASH/DEL
Hold down
when the
for 3 seconds
TALK
3. Lift the handset, press
listen for a dial tone.
and
TALK
key is not lit. The dis-
play shows ENTER AREA CODE. En-
ter your 3-digit area code. The phone
sounds two long beeps.
illus
illus
4. Press any number other than 0.
If the dial tone stops, you have
TONE/
touch-tone service. Leave
PULSE TONE
set to
.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 10 Tuesday, August 17, 1999 10:58 AM
PHONE OPERATION
Your ET-545’s handset display shows
telephone numbers as you dial them
or when you recall them from memory.
The handset shows the current chan-
nel number and the duration of your
call in minutes and seconds.
Note: When POWER is set to OFF,
other telephones on the same line still
ring when there is an incoming call.
The CHARGE/TALK indicator on the
base flashes until you answer the call.
To answer a call, just lift the handset
from the base.
If you subscribe to Caller ID, the ET-
545 also automatically displays infor-
mation about an incoming call before
you answer the call.
To make a call, lift the handset from
the base and press TALK. The hand-
set keypad and the CHARGE/TALK
indicator on the base light.
MAKING/ANSWERING A
CALL
illus
TALK key
CHARGE/
TALK indicator
on base lit
You can use your cordless telephone
at the base or away from the base.
At the Base
You can use the handset at the base
like a regular corded telephone. Set
POWER to ON and place the handset
on the base.
The keypad on the handset turns off if
no button is pressed for more than 10
seconds (but the TALK key remains
lit).
illus
Power ON
and handset on the base
To disconnect a call, replace the
handset on the base or press TALK so
the TALK key turns off.
Away from the Base
You can use the handset without be-
ing near the base. Set POWER to ON.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 11 Tuesday, August 17, 1999 10:58 AM
To make or answer a call, press TALK
so the TALK key on the handset lights.
Notes:
illus
• If the phone is out of range of the
base, the handset beeps three
times and the TALK key turns off.
• You can make or answer a call on
a phone on the same line as the
cordless phone, even if the ET-
545’s handset is away from the
base.
USING REDIAL
• The keypad on the handset turns
off if no button is pressed for more
than 10 seconds (but the TALK
key remains lit).
To quickly redial the last number di-
aled, simply lift the handset and press
TALK, then press REDIAL/PAUSE. The
redialed number appears on the dis-
play and the phone dials it.
To disconnect a call, press TALK so
the TALK key turns off.
REDUCING
INTERFERENCE
illus
The ET-545 automatically selects a
clear channel at the start of each call.
CH and the current channel number
appear on the display whenever TALK
is lit. Sometimes, however, the select-
ed channel picks up interference dur-
ing a call. To reduce interference
during a call, press CH to switch to an-
other channel (25 in all) until you re-
ceive better reception.
Notes:
• The redial memory holds up to 80
digits.
• We recommend you not use
REDIAL/PAUSE to dial numbers
that include a tone entry (see
“Using Tone Services on a Pulse
Line” on Page 12).
• The redial memory does not store
a FLASH/DEL entry or any digits
entered after you press FLASH/
DEL.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 12 Tuesday, August 17, 1999 10:58 AM
TONE/PULSE
1. Set
on the base to
USING FLASH/DEL
PULSE
.
FLASH/DEL
Use
on the handset to
2. Dial the service’s main number.
perform the switchhook operation for
special services, such as Call Waiting.
3. When the service answers, press
TONE
on the keypad. A appears
on the display. Then dial the addi-
tional numbers. The phone sends
these numbers as tone signals.
illus
4. When you complete the call, place
the handset on the base or press
TALK
to disconnect the call. The
phone automatically resets to
pulse dialing.
For example, if you have Call Waiting,
FLASH/DEL
press
to take an incoming
USING PAGE
call without disconnecting the current
call. FLASH briefly appears on the
The PAGE feature allows you to send
a page from the base to the handset,
so you can page someone at the
handset or locate it if you misplaced it.
FLASH/DEL
display. Press
again to re-
turn to the first call.
Notes:
• If you do not have special phone
FLASH/DEL
might disconnect the current call.
PAGE
ON
set to
When you press
POWER
on the base
, the handset
services, pressing
with
TALK
beeps four sets of two beeps,
flashes, and PAGING YOU appears
on the display. The CHARGE/TALK
indicator on the base flashes.
• The redial memory does not store
FLASH/DEL
a
entry or any digits
FLASH/
entered after you press
DEL
.
USING TONE SERVICES
ON A PULSE LINE
illus
Some special services, such as bank
by phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 13 Tuesday, August 17, 1999 10:58 AM
Note: The handset will not beep dur-
ing a call.
illus
MEMORY DIALING
You can store up to 30 phone num-
bers and associated names for quick
and easy dialing. Each stored number
can be up to 16 digits long, and each
name can be up to 15 characters.
Note: If you do not press any but-
ton on the keypad within about 25
seconds, the keypad light turns off
and the handset sounds 3 beeps.
Notes:
TONE/PULSE
PULSE
is set to
• If
MEMORY
You must press
again so
and you want to use tone dialing
for a memory number, you must
the keypad lights before you can
store the telephone number.
TONE
store the tone entry (
) as the
first entry of the number you want
to tone dial.
ENTER
appears on the display.
2. Press
. ENTER NAME
• Do not store a number with both
pulse and tone entries in the same
memory location. This could result
in a wrong number being dialed.
3. Use the keypad to enter charac-
ters and spaces.
Note: To store the phone number
without entering a name, skip this
step.
• To keep your accounts secure, we
recommend you do not store your
personal access code for services
such as bank-by-phone in a mem-
ory location.
To enter each letter or space, you
need to press two number keys.
To enter a letter, press a number
key (1 to 9) or
for the letter’s
1
,
2
3
group. Then press
, or
to
Storing a Name and Number
in Memory
select the desired letter. For
5
example, to enter JEN: Press
,
1
then press ; J appears. Then,
3
2
press then ; Eappears. Finally,
POWER
ON
, press
1. With
set to
6
2
press then ; N appears.
MEMORY
. The keypad lights and
MEMO #00 appears on the dis-
play.
• To enter a left parenthesis,
0
1
press then .
• To enter a right parenthesis,
0
2
press then .
13
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 14 Tuesday, August 17, 1999 10:58 AM
• To enter an at symbol (@),
7. Enter the two-digit memory loca-
tion number (01, 02, … 30) where
you want to store the number. The
index number appears, and two
long beeps sound. The phone
number is now stored in that
memory location.
press 0 then 3.
• To enter a space, press 1 then 1
again.
• To enter a dash, press 1 then 2.
• To enter an asterisk, press 1
then 3.
8. Pull out the memory index card
from the bottom of the base. Write
the person’s or company’s name
and memory location number on
the sheet in pencil (in case you
want to change it later).
• To enter an exclamation mark,
press
then 3.
Notes:
• If you enter a wrong character,
press FLASH/DEL to delete the
last entered character.
• You can enter up to 15 charac-
ters, including spaces. If you try
to enter more than 15 charac-
ters, the phone sounds three
beeps.
illus
4. Press MEMORY. ENTER TEL
Notes:
NUMBERappears.
• If you receive a call while you are
storing a number in memory,
press TALK to answer the call.
After the call, begin again at Step
1 to store the number.
5. Enter the phone number you want
to store. The number appears on
the display.
Notes:
• To change a number stored in
memory, simply store a new num-
ber in that location. To delete a
number, see “Deleting a Number
from Memory” on Page 16.
• The phone does not dial the
number while you are storing it.
• If you enter a wrong digit, press
FLASH/DEL to delete the last
entered digit.
• If you try to enter more than 16
digits, the phone sounds three
beeps.
6. Press MEMORY again. SELECT
MEMOappears.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 15 Tuesday, August 17, 1999 10:58 AM
Entering a Pause
in a Memory Number
In some telephone systems, you must
dial an access code (9, for example)
and wait for a second dial tone before
you can dial an outside number. If
your phone is connected to one of
these systems, you might want to en-
ter a pause after the access code
when you store a phone number in
memory.
illus
At the appropriate place in the num-
ber, press REDIAL/PAUSE to enter a
2-second pause. P appears. For a
longer pause, press REDIAL/PAUSE
again.
Dialing a Stored Number
There are two ways to dial a stored
number.
Method 1
1. Lift the handset and press TALK.
illus
The keypad and TALK key light.
2. When you hear a dial tone, press
MEMORY and then press the cor-
rect 2-digit memory location num-
ber. The memory location number
and the stored number appear on
the display, and the phone dials
the stored number.
REDIAL/PAUSE entry uses
one digit of memory.
Note: Each
Reviewing Numbers Stored in
Memory
Method 2
1. Lift the handset and press MEM-
ORY. MEMO#00appears on the
display.
Press MEMORY, then enter the num-
ber of the memory location to display
the stored number.
2. Press REVIEW < or > to search
for the desired stored number or
press the 2-digit memory location
number. The memory location
number, the name, and the phone
number appear on the display.
You can also review the information
stored in memory by pressing MEMO-
RY, then REVIEW < or >.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 16 Tuesday, August 17, 1999 10:58 AM
3. Press DIAL. The phone dials the
When storing numbers for special ser-
vices, store the service’s main phone
number in one memory location and
numbers for additional information in
other memory locations.
stored number.
If you press DIAL 1+, the
Note:
phone dials a 1 at the beginning of
the phone number (although it
does not appear on the display).
When calling special services, dial the
service’s main number first. Then, at
the appropriate place in the call, press
MEMORY and the memory location
number for the additional information.
Deleting a Number from
Memory
1. Press MEMORY.
Testing Stored
Emergency Numbers
2. Press REVIEW < or > to search
for the stored name and number
you want to delete.
If you store an emergency service’s
number (police department, fire de-
partment, ambulance) and you want to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Remain on the line to explain
the reason for your call.
3. Press FLASH/DEL. ERASE ME-
MO? appears.
4. Press FLASH/DEL again to con-
firm deletion. The phone sounds
two long beeps.
If you do not want to delete the
number, wait 30 seconds without
pressing any button.
Storing/Chain Dialing Service
Numbers
You can make a call using more than
one of the ET-545’s memory locations.
This is called chain dialing. Chain dial-
ing is useful for dialing special services
such as alternate long distance or
bank-by-phone.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 17 Tuesday, August 17, 1999 10:58 AM
CALLER ID OPERATION
If you subscribe to Caller ID, the sys-
tem automatically displays information
about calls you receive and stores the
information in Caller ID memory. The
system can store up to 100 number
only or name and number call records.
CALLFOWRDBUSY
Appears instead of the phone
number if the call was forwarded
to you by a phone that was set to
forward any busy calls.
CALFWRDNOANS
The first line of the Caller ID record
shows the time, date, and the number
of the call. The second line shows the
phone number of the caller and other
information about the call (see “Caller
ID Displays”). The third line shows the
name (if available) of the caller and
other information about the call.
Appears instead of the phone
number if the call was forwarded
to you by a phone that was set to
forward an unanswered call.
CALFWRDUNIVSL
Appears instead of the phone
number if the call was forwarded
to you by a phone that was set to
forward all calls.
Notes:
• If POWER is set to OFF or you are
using the phone, the phone does
not receive Caller ID information.
CALL#(XX)
Shows the number of calls stored
in Caller ID memory and in the
VIP Call List. (The highest number
is the most recent call.)
• If you are programming the sys-
tem when a call is received, the
phone automatically exits pro-
gramming and shows Caller ID
information.
Note: If there are 100 calls in Call-
er ID memory, the oldest call is
#00 and the most recent call is
#99.
CALLER ID DISPLAYS
CALLERIDERROR
Appears if the incoming Caller ID
information has data errors.
NEW
Indicates a new call.
MESSAGEWAITING
REPT
Appears if you subscribe to your
phone company’s message ser-
vice and a message is waiting.
Indicates a repeat call.
Note: NEW and REPT do not appear
again after you review the display in-
formation.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 18 Tuesday, August 17, 1999 10:58 AM
PRIVATE
DIALING NUMBERS
FROM A CALLER ID
RECORD
Appears if the caller chose to
block sending Caller ID informa-
tion. No caller information ap-
pears.
To dial a number stored in a Caller ID
REVIEW <
record, repeatedly press
>
or
until the phone number you want to
dial appears on the display, then
DIAL DIAL 1+
OUTOFAREA
Appears if the caller is not within a
Caller ID service area, or during
the following types of incoming
calls:
press
or
.
• Long distance call (except
when the long distance phone
company used for the call
transmits caller ID information)
illus
• Operator-assisted calls
• Calls made with a credit card
REVIEWING CALLER ID
RECORDS
To review Caller ID records, repeated-
REVIEW <
ly press
>
the
to see older calls
or to see the more recent calls when
TALK
DIAL
Press
to dial the number that ap-
pears in the Caller ID record.
key is not lit.
DIAL 1+
Press
to dial a 1 before the
Notes:
10-digit telephone number.
• If you do not press any button
within 5 seconds while you are
reviewing Caller ID records, the
system automatically turns off the
display.
Note: The phone does not display the
1
, but does dial it.
• If a displayed phone number is
ENTER
more than 12 digits, press
to see the rest of the phone num-
ber.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 19 Tuesday, August 17, 1999 10:58 AM
If you do not want to delete all
records, wait 5 seconds without
pressing any button.
DELETING CALLER ID
RECORDS
You can delete individual Caller ID
records, or all Caller ID records stored
in the system.
VIP CALL LIST
Your phone lets you save up to 20
Caller ID records in its VIP Call List.
Whenever someone calls from one of
those 20 numbers, the system sounds
distinctive rings after the first ring to
alert you (if you subscribe to Caller
ID).
Follow these steps to delete a single
record.
REVIEW <
>
1. Repeatedly press
or
until the call record you want to
delete appears on the display.
FLASH/DEL
2. Press
. ERASE CALL
ID?appears.
Storing Records in the VIP
Call List
illus
Note: The number you store in the
VIP Call List must be in a Caller ID
record. If necessary, call the person
you want to add and ask them to call
you back so you can store the record.
FLASH/DEL
3. Press
again to con-
firm deletion. The phone sounds
two long beeps.
REVIEW <
until the call record you want to
store appears on the display.
>
1. Repeatedly press
or
If you do not want to delete the
record, wait 5 seconds without
pressing any button.
VIP
ENTER
to store the
record into the VIP memory. The
phone sound two long beeps.
2. Press
then
Follow these steps to delete all call
records.
REVIEW <
>
1. Press
or
to display
illus
any Caller ID record.
FLASH/DEL
2. Press and hold
for
about 5 seconds. ERASE ALL?
appears.
FLASH/DEL
3. Press
to confirm dele-
tion. The phone sounds two long
beeps.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 20 Tuesday, August 17, 1999 10:58 AM
Notes:
If you do not want to delete the
record, wait 5 seconds without
pressing any button.
• If you do not press any button for
about 5 seconds, the display auto-
matically turns off.
Follow these steps to delete all call
records.
• VIP MEMO FULL appears and
the phone sounds three long
beeps when the VIP Call List is
full.
VIP
REVIEW <
1. Press
and press
or
>
to display any VIP call record.
FLASH/DEL
2. Press and hold
for
about 5 seconds, ERASE ALL
VIP?appears.
Reviewing the VIP Call List
FLASH/DEL
tion. The phone sounds two long
beeps.
3. Press
to confirm dele-
VIP
VIEW <
you want to see appears on the dis-
play. CALL #XX shows the order in
which each record was stored in the
VIP Call List. (Call #01 is the earliest
stored record.)
RE-
or until the VIP call record
Press
, then repeatedly press
>
If you do not want to delete the
record, wait 5 seconds without
pressing any button.
Dialing a Number from the
VIP Call List
Deleting Records from the
VIP Call List
Follow these steps to dial a number
stored in the VIP Call List.
You can delete individual VIP records,
or all records in the VIP Call List.
VIP
1. Press
then repeatedly press
REVIEW <
>
or
until the phone
Follow these steps to select and de-
lete a single VIP record.
number you want to dial appears
on the display.
VIP
1. Press
then repeatedly press
DIAL
DIAL 1+
.
2. Press
Press
or
REVIEW <
>
or
until the record
you want to delete appears on the
display.
DIAL
to dial the number that
appears in the record.
FLASH/DEL
ID?appears.
2. Press
. ERASE CALL
DIAL 1+
the 10-digit telephone number.
Press
to dial a 1 before
FLASH/DEL
3. Press
again to con-
firm deletion. The phone sounds
two long beeps.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 21 Tuesday, August 17, 1999 10:58 AM
TROUBLESHOOTING
We do not expect you to have any problems with your telephone, but if you do, the
following suggestions might help. If you still have problems, check other phones on
the same line to see if they work properly. If they do and the problem does not
seem to be with your phone service, take the phone to your local RadioShack store
for assistance.
Problem
Solutions
The handset does not work.
Be sure POWER is set to ON.
Move the handset closer to the base.
Be sure the phone line cord and AC adapter are
correctly and securely connected.
Be sure the battery pack is connected and
charged.
Fully extend the base’s antenna vertically.
Return the handset to the base for 5 seconds,
then try again.
Volume drops or you hear
unusual sounds.
Someone has picked up another phone on the
same line. Hang up the other phone.
Call is noisy.
Do not place the base near appliances or large
metal objects.
Keep the handset away from interference
sources such as computers, remote control toys,
wireless microphones, wireless alarm systems,
wireless intercoms and room monitors, fluores-
cent lights, and electrical appliances. If the inter-
ference is severe, turn off the interfering device.
Press CH to switch to another channel.
Hang up and redial the number.
Phone does not dial more
than 7 digits when dialing
from a Caller ID record.
Store the local area code (see “Storing an Area
Code” on Page 9).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 22 Tuesday, August 17, 1999 10:58 AM
Problem
Solutions
The handset’s range
decreases.
Fully extend the base’s antenna vertically.
Return the handset to the base to recharge the
battery pack.
Be sure the base’s antenna is not touching a
metal surface.
Receiver sound flutters or
fades.
Be sure the battery pack is charged.
Fully extend the base’s antenna vertically.
Move the handset closer to the base.
Be sure POWER is set to ON.
Can make calls, but tele-
phone does not ring.
Telephone company may be using unusual ring-
ing methods. Your telephone is designed for
standard straight line bridged ringing.
Can receive calls, but cannot Set TONE/PULSE correctly for the type of service
make calls.
you have (see “Setting the Dialing Mode” on
Page 9).
You cannot answer/make a
call and the handset sounds
an error tone when you lift it
from the base or press TALK.
Unplug and plug AC power to reset the auto-
matic security access code.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 23 Tuesday, August 17, 1999 10:58 AM
CARE AND MAINTENANCE
Your ET-545 25-Channel Caller ID Cordless Telephone is an example of superior
design and craftsmanship. The following suggestions will help you care for your
phone so you can enjoy it for years.
Keep the phone dry. If it gets wet, wipe it dry immediately. Liquids can
contain minerals that corrode the electronic circuits.
Handle the phone gently and carefully. Dropping it can damage cir-
cuit boards and cases and cause the phone to work improperly.
Use and store the phone only in normal temperature environments.
Temperature extremes can shorten the life of electronic devices and
distort or melt plastic parts.
Keep the phone away from dust and dirt which can cause premature
wear of parts.
Wipe the phone with a damp cloth occasionally to keep it looking
CLEANER
new. Do not use harsh chemicals, cleaning solvents, or strong deter-
gents to clean your phone.
Modifying or tampering with the phone’s internal components can cause a malfunc-
tion and might invalidate its warranty and void your FCC authorization to operate it.
If your phone is not performing as it should, take it to your local RadioShack store
for assistance. If the trouble is affecting the phone lines, the phone company might
ask you to disconnect your phone until you have resolved the problem.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 24 Tuesday, August 17, 1999 10:58 AM
3. Insert the new battery pack in the
compartment and fasten the plas-
tic strap. Then connect the battery
pack’s plug to the pins inside the
compartment.
REPLACING THE
BATTERY PACK
If you follow the instructions in “Charg-
ing the Battery Pack” on Page 7, the
supplied battery pack should last for
several years. When the battery pack
loses its ability to fully charge, replace
the battery pack with a new 3.6 volt,
300 mAh battery pack with a connec-
tor that fits the connector pins in the
battery compartment. You can order a
replacement battery pack through
your local RadioShack store.
4. Replace the battery compartment
cover.
Important: Your telephone contains a
rechargeable nickel cadmium battery
pack. At the end of the battery pack’s
useful life, it must be recycled or dis-
posed of properly. Contact your local,
county, or state hazardous waste
management authorities for informa-
tion on recycling or disposal programs
in your area. Some options that might
be available are: municipal curb-side
collection, drop off boxes at retailers
such as your local RadioShack store,
recycling collection centers, and mail
back programs.
Follow these steps to install the new
battery pack, then charge it for at least
15 hours (see “Charging the Battery
Pack” on Page 7).
illus
THE FCC WANTS YOU
TO KNOW
In the unlikely event that your phone
causes problems on the phone line,
the phone company can temporarily
discontinue your service. If this hap-
pens, the phone company attempts to
notify you in advance. If advance no-
tice is not practical, the phone compa-
ny notifies you as soon as possible
and advises you of your right to file a
complaint with the FCC.
1. Slide off the battery compartment
cover and unfasten the plastic
strap that secures the battery
pack.
2. Disconnect the old battery pack’s
plug from the pins and remove the
battery pack.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 25 Tuesday, August 17, 1999 10:58 AM
Also, the phone company can make
changes to its lines, equipment, oper-
ations, or procedures that could affect
the operation of the phone. The phone
company notifies you of these chang-
es in advance, so you can take the
necessary steps to prevent interrup-
tion of your phone service.
LIGHTNING
Your phone has built-in protection cir-
cuits to reduce the risk of damage
from surges in phone line current.
These protection circuits meet or ex-
ceed FCC requirements. However,
lightning striking the phone lines can
damage your phone.
Your phone might cause TV or radio
interference even when it is operating
properly. To determine whether your
phone is causing the interference, turn
off your phone. If the interference
goes away, your phone is causing it.
Try to eliminate the interference by:
Lighting damage is not common. Nev-
ertheless, if you live an area that has
severe electrical storms, we suggest
that you unplug your phone during
storms to reduce the possibility of
damage.
• Moving your phone away from the
receiver
• Connecting your phone to an AC
outlet that is on a different electri-
cal circuit from the receiver
• Contacting a radio/TV technician
or your local RadioShack store for
help
25
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 26 Tuesday, August 17, 1999 10:58 AM
NOTES
26
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 27 Tuesday, August 17, 1999 10:58 AM
27
Download from Www.Somanuals.com. All Manuals Search And Download.
43-1045.fm Page 28 Tuesday, August 17, 1999 10:58 AM
RadioShack Limited Warranty
This telephone product is warranted against manufacturing defects in material and
workmanship for one (1) year from the date of purchase from RadioShack company
owned stores and authorized RadioShack franchisees and dealers. Within this period,
RadioShack will repair it without charge for parts and labor. Simply bring your
RadioShack sales slip as proof-of-purchase date to any RadioShack store.
This warranty does not cover damage or failure caused by or attributable to Acts of
God, abuse, misuse, improper or abnormal usage, faulty installation, improper mainte-
nance, lightning or other incidence of excess voltage, or any repairs other than those
provided by a RadioShack Authorized Service Facility, or transportation costs.
RadioShack is not responsible or liable for indirect, special, or consequential
damages arising out of or in connection with the use or performance of the prod-
uct or other damages with respect to loss of property, loss of revenue or profit, or
costs of removal, installation or reinstallation.
EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES
AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION
OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states do
not allow the limitation or exclusion of incidental or consequential damages and some
states do not allow limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser. There will be charges ren-
dered for repairs to the product made after the expiration of the aforesaid one (1) year
warranty period.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
We Service What We Sell
10/95
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
3A7
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|