OWNER’S INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’UTILISATION
Cooling only
AFPCC052CA0
System Air Conditioner
Aire acondicionado sistemático
Climatiseur numérique multifonctionnel
E S F DB98-05497A(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
◆
PREPARING YOUR AIR CONDITIONER
◆◆◆Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
◆◆◆View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
◆◆◆Wireless Remote Controller-Buttons and Display . . . . . . . . . . . 6
◆◆◆Wired Remote Controller-Buttons and Display . . . . . . . . . . . . . 7
◆◆◆Centralized Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
◆◆◆Getting Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
◆◆◆Inserting the Wireless Remote Controller Batteries . . . . . . . . 10
USING WIRELESS REMOTE CONTROLLER
◆
OPERATING YOUR AIR CONDITIONER
◆◆◆Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . 12
◆◆◆Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
◆◆◆Heating Your Room (Except Cooling Only Models) . . . . . . . . 14
◆◆◆Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 15
◆◆◆Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
◆◆◆Adjusting the Air Flow Direction . . . . . . . . . . . . . . . . . . . . . . . 17
◆
PROGRAMMING YOUR AIR CONDITIONER
◆◆◆Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
◆◆◆Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
USING WIRED REMOTE CONTROLLER
◆
OPERATING YOUR AIR CONDITIONER
◆◆◆Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . 21
◆◆◆Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
◆◆◆Heating Your Room (Except Cooling Only Models) . . . . . . . . 23
◆◆◆Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 24
◆◆◆Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
◆◆◆Adjusting the Air Flow Direction . . . . . . . . . . . . . . . . . . . . . . . 25
◆
PROGRAMMING YOUR AIR CONDITIONER
◆◆◆Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
◆◆◆Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
USING CENTRALIZED CONTROLLER
◆◆◆Using the Centralized Controller . . . . . . . . . . . . . . . . . . . . . . . 28
◆
RECOMMENDATIONS FOR USE
◆◆◆Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . 29
◆◆◆Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . 30
◆◆◆Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . 31
◆◆◆Bio-Pure Filter Installation (Optional) . . . . . . . . . . . . . . . . . . . . 32
◆◆◆Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 33
◆
TECHNICAL SPECIFICATIONS
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
View of the Unit
The figures are shown in this instruction may differ from yours depending on the model.
Indoor Unit
Air flow blades(outlet)
Air inlet
Air filter(under the grille)
Timer indicator
On/Off button
On/Off indicator
Remote control
sensor
Fan indicator
Filter Sign
indicator
Removing frost
indicator
(Except Cooling
Only Models)
Outdoor Unit
Outdoor Unit
TYPE A
Air outlet
Connection valve
(Inside)
TYPE B
Air outlet
Connection valve
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Outdoor Unit TYPE C
Air outlet
Connection valve
Outdoor Unit TYPE D
Air outlet
Connection valve
Air outlet
Outdoor Unit TYPE E
Outdoor Unit TYPE F
Outdoor Unit TYPE G
Connection valve
Air outlet
Connection valve
Air outlet
Connection valve
If the heat exchanger in the outdoor unit gets dusty, cooling efficiency may fall. So clean the heat exchanger with water
when it becomes dirty. However, be careful when you wash the surface of the heat exchanger because it is very sharp.
Note
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Remote Controller-Buttons and Display
The wireless remote controller is an optional accessory.
Mode selection button
Operating mode
Temperature adjustment
buttons
Temperature setting
Filter Reset button
Fan speed
Fan speed adjustment
button
Air flow direction
Swing button
On Timer setting
On Timer button
Off Timer setting
Off Timer button
Battery discharge indicator
On/Off & Timer
Set/Cancel button
Note
- After cleaning the air filter, press the filter reset button.
- The heating mode( ) is not selected in cooling only models.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Wired Remote Controller-Buttons and Display
The wired remote controller is an optional accessory and it is installed on the wall.
Operating mode
Removing frost indicator
Centralized controller indicator
(In case of installing the Centralized controller)
(Except Cooling Only Models)
Communication error indicator
Temperature setting
Fan speed
On Timer setting
Off Timer setting
Air flow direction
Test indicator
Filter Sign indicator
On/Off & Timer
Set/Cancel button
Temperature adjustment
buttons
On/Off indicator
On Timer button
Fan speed adjustment
button
Off Timer button
Swing button
Test button
Filter Reset button
Mode selection button
Note
- Test button is for your installation specialist. You must NOT press it.
- After cleaning the air filter, press the filter reset button. Then the wired remote
controller will display the FILTER SIGN indicator when the time to clean the air filter;
refer to page 31.
- The heating mode( ) is not selected in cooling only models.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Centralized Controller
The centralized controller is an optional accessory and it is installed on the wall.
Operating lamp
All On button
All Off button
On/Off indicators
On/Off buttons
Index
Note
Operating lamp comes on when at least one air conditioner connected to the
centralized controller is operating.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Start
You have just purchased a system type air conditioner and it has been
installed by your installation specialist.
Your Owner’s Instructions contain much valuable information on using your
air conditioner. Please take the time to read them as they will help you take full
advantage of the unit’s features.
The booklet is organized as follows.
◆ The following figures are shown on pages from 4 to 8 :
-
-
-
-
Indoor and outdoor units
Wireless remote controller (buttons and display)
Wired remote controller (buttons and display)
Centralized controller
◆ In the main part of the document, you will find a series of step-by-step proce-
dures for each function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS
PUSH
HOLD DOWN
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Wireless Remote Controller Batteries
You must insert or replace the remote controller batteries when :
◆ You purchase the air conditioner
◆ The remote controller does not work correctly
Note
◆ Use two AAA, LR03 1.5V batteries.
◆ Do not use old batteries or different kinds of batteries together.
◆ Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
2
Push the battery cover on the rear of the remote controller with your
thumb in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote controller.
◆ - on the battery with - on the remote controller.
3
Close the cover by sliding it back until it clicks into place.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using
Wireless
Remote
Controller
This chapter indicates how to operate and program
your air conditioner with the wireless remote controller.
The wireless remote controller is an optional accessory.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Automatic Operation Mode
In the Automatic mode, the room temperature and the fan speed are
controlled automatically.
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the indoor unit comes on.
◆ The air conditioner runs in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
To select the AUTO mode, press the Mode button until
is displayed
2
at the top of the wireless remote controller.
Result: ◆ The indoor unit beeps.
◆ The air conditioner runs in AUTO mode.
Note
You can change modes at any time.
3
To adjust the temperature, press the Temperature buttons one or more
times until the required temperature is displayed. Possible temperatures are
between 65OF and 86OF inclusive.
Result:
◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1OF.
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
The quantity of air is adjusted automatically.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooling Your Room
You must select the COOL mode if you wish to adjust the :
◆ Cooling temperature
◆ Fan speed when cooling
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the indoor unit comes on.
◆ The air conditioner runs in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
To select the COOL mode, press the Mode button until
is displayed
at the top of the wireless remote controller.
Result: ◆ The indoor unit beeps.
◆ The air conditioner runs in COOL mode.
You can change modes at any time.
Note
3
To adjust the temperature, press the Temperature buttons one or more
times until the required temperature is displayed. Possible temperatures
are between 65OF and 86OF inclusive.
Result: ◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1OF.
- The indoor unit beeps.
◆ The air conditioner starts cooling, provided that the room
◆ temperature is higher than the selected temperature ; the fan
◆ will, however, operate.
4
5
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed :
Automatic(rotated :
◆
◆
)
Low
Medium
High
To control the direction of the air flow, refer to page 17.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
(Except Cooling Only Models)
Heating Your Room
You can select the HEAT mode only in heat pump models.
You must select the HEAT mode if you wish to adjust the :
◆ Heating temperature
◆ Fan speed when heating
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the indoor unit comes on.
◆ The air conditioner runs in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
To select the HEAT mode, press the Mode button until
is displayed
at the top of the wireless remote controller.
Result: ◆ The indoor unit beeps.
◆ The air conditioner runs in HEAT mode.
You can change modes at any time.
Note
3
To adjust the temperature, press the Temperature buttons one or more
times until the required temperature is displayed. Possible temperatures
are between 61OF and 86OF inclusive.
Result: ◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1OF.
- The indoor unit beeps.
◆ The air conditioner starts heating, provided that the room
temperature is lower than the selected temperature ; the fan
will, however, operate.
4
5
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed :
Automatic(rotated :
◆
◆
)
Low
Medium
High
To control the direction of the air flow, refer to page 17.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can
remove excess humidity without lowering the room temperature too
much.
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the indoor unit comes on.
◆ The air conditioner runs in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
To select the DRY mode, press the Mode button until
is displayed
at the top of the wireless remote controller.
Result: ◆ The indoor unit beeps.
◆ The air conditioner runs in DRY mode.
You can change modes at any time.
Note
3
To adjust the temperature, press the Temperature buttons one or more
times until the required temperature is displayed. Possible temperatures
are between 65OF and 86OF inclusive.
Result: ◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1OF.
- The indoor unit beeps.
◆ The air conditioner starts removing the excess humidity.
The quantity of air is adjusted automatically.
Note
In the dry mode, the fan speed is controlled automatically.
4
To control the direction of the air flow, refer to page 17.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Airing Your Room
If the atmosphere in your room is stale, you can air it using the
FAN feature.
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the indoor unit comes on.
◆ The air conditioner runs in the mode selected when
◆ the unit was last used.
◆ The indoor unit beeps.
2
3
To select the FAN mode, press the Mode button until
the top of the wireless remote controller.
is displayed at
Result: ◆ The indoor unit beeps.
Result: ◆ The air conditioner runs in FAN mode.
You can change modes at any time.
Note
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed:
Low
Medium
High
To control the direction of the air flow, refer to page 17.
4
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Air Flow Direction
Depending on the position of the indoor unit, you can adjust the position of
the air flow blades, thus increasing the efficiency of the air conditioner.
Press the Swing button.
1
Result: ◆ The blades are moving between up and down.
Result: ◆ The indoor unit beeps.
IMPORTANT
When the air conditioner is first turned on, the blades are moved.
To stop the blades, press the Swing button again.
2
To set to the required position, press the Swing button again when the
blades are in the required position.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time from 30 minutes
to 24 hours.
To set the operating time, press the On Timer button one or more times
until the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
1
Result: ◆ Each time you press On Timer button:
- The time is adjusted by 0.5 hour to 5 hours, by 1 hour from
6 hours to 24 hours.
Press the
Result:
(Set/Cancel) button to complete the setting.
◆ The remaining time is displayed.
2
◆ Blinking of the timer indicator stops.
◆ The selected mode and the temperature disappear on the
display after 5 seconds.
◆ The air conditioner will switch on automatically when the
counter displayed on the remote controller reaches the
setting time as disappearing the On timer setting.
Note
You can see or change the setting mode and/or the temperature
by pressing the Mode button or the Temperature buttons after
setting the On timer.
To Cancel the On Timer
To cancel the On Timer, press the On Timer button one or more times
until the timer setting disappears.
1
Press the
(Set/Cancel) button.
2
Note
If you want to turn on the air conditioner before the timer reaches
the setting time, press the
(ON/OFF) button.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from 30 minutes
to 24 hours.
To set the operating time, press the Off Timer button one or more times
until the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
1
Result: ◆ Each time you press Off Timer button:
- The time is adjusted by 0.5 hour to 5 hours, by 1 hour from
6 hours to 24 hours.
Press the
(Set/Cancel) button to complete the setting.
2
Result: ◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The selected mode and the temperature disappear on the
display after 5 seconds.
◆ The air conditioner will switch off automatically when the
counter displayed on the remote controller reaches the
setting time as disappearing the Off timer setting.
Example If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
1. Press the On Timer button until ‘2.0 Hr’ is displayed.
2. Press the
3. Press the Off Timer button until ‘4.0 Hr’ is displayed.
4. Press the (Set/Cancel) button.
(Set/Cancel) button.
Note
You can see or change the setting mode and/or the temperature
by pressing the Mode button or the Temperature buttons after
setting the Off timer.
To Cancel the Off Timer
To cancel the Off Timer, press the Off Timer button one or more times
until the timer setting disappears.
1
Press the
(Set/Cancel) button.
2
Note
If you want to turn off the air conditioner before the timer reaches
the setting time, press the
(ON/OFF) button.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Wired
Remote
Controller
This chapter indicates how to operate and program
your air conditioner with the wired remote controller.
The wired remote controller is an optional accessory.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Automatic Operating Mode
In the Automatic mode, the room temperature and the fan speed are
controlled automatically.
If necessary, press
(ON/OFF) button.
1
Result: : ◆ The On/Off indicator on the wired remote controller comes on.
◆ The air conditioner runs in the mode selected when
◆ the unit was last used.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
To select the AUTO mode, press the Mode button until
is displayed
2
at the top of the wired remote controller.
Result: : ◆ The air conditioner runs in AUTO mode.
Note
You can change modes at any time.
3
To adjust the temperature, press the Temperature buttons one or more times
until the required temperature is displayed. Possible temperatures are
between 65OF and 86OF inclusive.
Result:
◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1OF.
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
The quantity of air is adjusted automatically.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooling Your Room
You must select the COOL mode if you wish to adjust the :
◆ Cooling temperature
◆ Fan speed when cooling
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the wired remote controller comes on.
◆ The air conditioner runs in the mode selected when
◆ the unit was last used.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
To select the COOL mode, press the Mode button until
the top of the wired remote controller.
Result: ◆ The air conditioner runs in COOL mode.
You can change modes at any time.
is displayed at
Note
3
To adjust the temperature, press the Temperature buttons one or more times
until the required temperature is displayed. Possible temperatures are between
65OF and 86OF inclusive.
Result:
◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1OF.
◆ The air conditioner starts cooling, provided that the room
◆ temperature is higher than the selected temperature ;
◆ the fan will, however, operate.
4
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed :
Automatic(rotated :
◆
◆
)
Low
Medium
High
5
To control the direction of the air flow, refer to page 25.
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
(Except Cooling Only Models)
Heating Your Room
You can select the HEAT mode only in heat pump models.
You must select the HEAT mode if you wish to adjust the :
◆ Heating temperature
◆ Fan speed when heating
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the wired remote controller comes on.
◆ The air conditioner runs in the mode selected when
◆ the unit was last used.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
To select the HEAT mode, press the Mode button until
top of the wired remote controller.
Result: ◆ The air conditioner runs in HEAT mode.
You can change modes at any time.
is displayed at the
Note
3
To adjust the temperature, press the Temperature buttons one or more times
until the required temperature is displayed. Possible temperatures are between
61OF and 86OF inclusive.
Result:
◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1OF.
◆ The air conditioner starts heating, provided that the room
◆ temperature is lower than the selected temperature ;
◆ the fan will, however, operate.
4
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed :
Automatic(rotated :
◆
◆
)
Low
Medium
High
5
To control the direction of the air flow, refer to page 25.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can
remove excess humidity without lowering the room temperature
too much.
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the wired remote controller comes on.
◆ The air conditioner runs in the mode selected when
◆ the unit was last used.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2
3
To select the DRY mode, press the Mode button until
the top of the wired remote controller.
Result: ◆ The air conditioner runs in DRY mode.
is displayed at
You can change modes at any time.
Note
To adjust the temperature, press the Temperature buttons one or more times
until the required temperature is displayed. Possible temperatures are
between 65OF and 86OF inclusive.
Result:
◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1OF.
◆ The air conditioner starts removing the excess humidity.
The quantity of air is adjusted automatically.
Note
In the dry mode, the fan speed is controlled automatically.
4
To control the direction of the air flow, refer to page 25.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Airing Your Room
If the atmosphere in your room is stale, you can air it using the
FAN feature.
If necessary, press
(ON/OFF) button.
1
Result: ◆ The On/Off indicator on the wired remote controller comes on.
◆ The air conditioner runs in the mode selected when the unit
was last used.
To select the FAN mode, press the Mode button until
the top of the wired remote controller.
is displayed at
2
3
Result: ◆ The air conditioner runs in FAN mode.
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed:
Low
Medium
High
To control the direction of the air flow, refer to below.
4
Adjusting the Air Flow Direction
Depending on the position of the indoor unit, you can adjust the position of
the air flow blades, thus increasing the efficiency of the air conditioner.
Press the Swing button.
1
Result: The blades are moving between up and down.
IMPORTANT
When the air conditioner is first turned on, the blades are
moved.
To stop the blades, press the Swing button again.
2
To set to the required position, press the Swing button again
when the blades are in the required position.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time
from 30 minutes to 24 hours.
To set the operating time, press the On Timer button one or more times
until the required time is displayed. Possible time is between 0.5 hour and
24 hours inclusive.
1
Result: ◆ Each time you press On Timer button:
- The time is adjusted by 0.5 hour to 5 hours, by 1 hour
from 6 hours to 24 hours.
Press the
(Set/Cancel) button to complete the setting.
2
Result: ◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The selected mode and the temperature disappear on the
display after 5 seconds.
◆ The air conditioner will switch on automatically when the
counter displayed on the remote controller reaches the
setting time as disappearing the On timer setting.
Note
You can see or change the setting mode and/or the temperature
by pressing the Mode button or the Temperature buttons after
setting the On timer.
To Cancel the On Timer
To cancel the On Timer, press the On Timer button one or more times
until the On timer setting disappears.
1
2
Press the
(Set/Cancel) button.
Note
If you want to turn on the air conditioner before the timer reaches
the setting time, press the (ON/OFF) button.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time
from 30 minutes to 24 hours.
To set the operating time, press the Off Timer button one or more times
until the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
1
Result: ◆ Each time you press Off Timer button:
- The time is adjusted by 0.5 hour to 5 hours, by 1 hour
from 6 hours to 24 hours.
Press the
(Set/Cancel) button to complete the setting.
2
Result: ◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The selected mode and the temperature disappear on the
display after 5 seconds.
◆ The air conditioner will switch off automatically when the
counter displayed on the remote controller reaches the
setting time as disappearing the Off timer setting.
Example If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
1. Press the On Timer button until ‘2.0 Hr’ is displayed.
2. Press the
3. Press the Off Timer button until ‘4.0 Hr’ is displayed.
4. Press the (Set/Cancel) button.
(Set/Cancel) button.
Note
You can see or change the setting mode and/or the temperature
by pressing the Mode button or the Temperature buttons after
setting the Off timer.
To Cancel the Off Timer
To cancel the Off Timer, press the Off Timer button one or more times
until the timer setting disappears.
1
2
Press the
(Set/Cancel) button.
Note
If you want to turn off the air conditioner before the timer reaches
the setting time, press the (ON/OFF) button.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Centralized Controller
The centralized controller is an optional accessory.
Up to sixteen air conditioners can be turned on or off by connecting to the
centralized controller. However, you cannot adjust the cooling temperature or
set the timer with it. If you also have the wired remote controller,
CENTRALIZED CONTROL is displayed at the top of the remote controller.
To turn on the all of air conditioners connected to the centralized controller,
press the (All ON) button.
1
2
3
To turn on/off a specific air conditioner, press the
(ON/OFF) button.
Result: ◆ The On/Off indicator comes on when the air conditioner is
operating.
To turn off the all of air conditioners connected to the centralized controller,
press the
(All OFF) button.
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Recommendations
Here are a few recommendations that you should follow when operating
your air conditioner.
Topic
Recommendation
Heating
The heat pump function of the air conditioner absorbs heat
performances from outside air and brings it indoors. As the temperature of the
outside air drops, the heating performance of air conditioner will
decrease. If you find that the room is not warm enough, using
an additional heating appliance is recommended.
Frost
When outside temperature is low but humidity is high,
frost may form on the outdoor unit at HEAT mode.
If this happens:
◆◆The heating operation stops.
◆◆The defrost mode will be triggered automatically for about ten
minutes.
No intervention is required ; after about ten minutes, the air
conditioner operates again normally.
High indoor
and outdoor
If both indoor and outdoor temperatures are high and the air
conditioner is running at HEAT mode, the outdoor unit’s fan
temperatures and compressor may stop at times.
This is normal ; simply wait until the air conditioner switches
on again.
Power failure
If a power failure occurs while the air conditioner is operating,
the unit will be switched off. When the power returns, the air
conditioner starts up again automatically.
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges,
within which the air conditioner can be used.
If the air conditioner is used at...
Then...
High temperature
The automatic protection feature may be
triggered and the air conditioner stopped.
Low temperature
A water leakage or some other
malfunction may happen if the heat
exchanger freezes.
High humidity levels
Water may condense on and drip from
the surface of the indoor unit if it is used
for a long periods.
Mode
Heating
Cooling
Drying
Outdoor Temperature
- 4°F to 75°F approx.
23°F to 109°F approx.
23°F to 109°F approx.
Indoor Temperature
81°F or less
Indoor Humidity
-
70°F to 90°F approx.
65°F to 90°F approx.
80% or less
-
◆◆ If the heating operation is used at below 32°F(outdoor temperature)
then, it does not heat at its full capacity.
If the cooling operation is used at over 91°F(indoor temperature) then,
it does not cool at its full capacity.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner, you must clean
it regularly to remove the dust that accumulates on the air filter.
Before cleaning your air conditioner, ensure that you have
switched off the electric circuit breaker used for the unit.
IMPORTANT
Open the front grille by pushing the tabs on the grille.
1
You must give attention when disassembling the front grille
and must check the safety clips have been installed.
If you do not check them, the front grille will drop suddenly
and you will be hurt.
IMPORTANT
Remove the front grille.
2
2-1 Remove the safety clips.
2-2 Open the front grille about 45° and pull it forward.
Pull out the air filter.
3
4
Remove all dust on air filter with a vacuum cleaner or a brush. In case of
serious dust accumulation, put the air filter in warm detergent water and
shake it vertically.
Safety Clip
Note
When you have installed the Bio-Pure filter, do not allow any
liquids to contact the filter. It may lose its properties.
Dry the air filter.
5
6
7
8
When you have finished, insert the filter into the front grille.
Clean the unit with a vacuum cleaner or a brush once a month.
Reinstall the front grille and the safety clips.
Note
You can use all 4 points of the indoor unit for installing the front
grille and the safety clips depending on your requirement.
Note
After cleaning the air conditioner, press the Filter Reset button.
Wired Remote Controller
Wireless Remote Controller
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Bio-Pure Filter Installation (Optional)
The air conditioner can be fitted with a Bio-Pure filter to remove minute dust
particles. The service life of the filter is approximately three months depending
on the time during which the air conditioner is used.
Remove the vinyl packing from the filter.
1
Note
Do not remove the packing from a bio-pure filter until you wish
to use the filter, as it will lose its properties.
Open the front grille by pulling the tabs on the grille.
2
3
Remove the front grille.
3-1 Remove the safety clips.
3-2 Open the front grille about 45° and pull it forward.
Pull out the air filter.
4
Locate the bio-pure filter on the center of air filter.
Secure the bio-pure filter with four screws.
5
6
7
Reinstall the air filter, the front grille and the safety clips.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save your time and expense of an unnecessary call.
Problem
Explanation/Solution
The air conditioner does not ◆ Check that the breaker used for the air conditioner is switched on.
operate at all
Wired Remote Controller
The air conditioner does not
operate with the remote
controller
◆
is displayed on the wired remote controller. In this case,
turn the air conditioner off and contact your dealer.
Wired Remote Controller
When turning on/off the
air conditioner, it is not
◆ In case of using the wired remote controller for a group, the air
conditioners connected to the remote controller are turned on/off in
order. Thus, it takes some time(up to 32 seconds).
turned on/off immediately.
Wireless Remote Controller
The air conditioner does not ◆ Check that there are no obstacles between you and the remote
operate with the remote
controller
control sensor.
◆ Check the wireless remote controller batteries (Refer to page 10).
◆ Check that you are close enough to the remote control sensor.
(seven metres/yards or less).
Wireless Remote Controller
No beep is heard when you ◆ Check that you are pointing the remote controller at the remote
press
(ON/OFF) on the
control sensor on the indoor unit.
remote controller
◆ Replace the remote controller batteries if necessary.
◆ If there is a strong light around the air conditioner, a
three-wavelength light, a neon sign, etc., for example,
the air conditioner may not be operated with a remote controller.
If this happens, use the remote controller close by the remote
control sensor.
The air conditioner does
not cool or heat
◆ Check that the correct operating mode has been selected.
◆ The room temperature may be too low or too high.
◆ Dust may be blocking the air filter guard; refer to page 31
for cleaning instructions.
◆ Check that there is no obstacle in front of the outdoor unit.
When heating, the required ◆ Check that the required temperature has been set correctly.
room temperature is never
reached and the air
◆ Increase the fan speed.
conditioner frequently stops
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Model
Power Supply
AFPCC052CA0
1Ø, 208-230V~, 60Hz
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
THIS AIR CONDITIONER IS MANUFACTURED BY:
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:
CE CLIMATISEUR EST FABRIQUE PAR:
ELECTRONICS
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
|