Operator′s manual
M48 Pro M53 S Pro
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Contents
KEY TO SYMBOLS
Key to symbols .............................................................
Steps before using a new lawn mower ........................
CONTENTS
2
2
Contents ......................................................................
SAFETY INSTRUCTIONS
3
Personal protection ......................................................
Machine′s safety equipment ........................................
4
4
Checking, maintaining and servicing the machine′s
safety equipment ..........................................................
5
6
8
General safety precautions ..........................................
General working instructions .......................................
WHAT IS WHAT?
What is what on the lawn mower? M48 Pro.................. 10
What is what on the lawn mower? M53 S Pro .............. 11
ASSEMBLY
Fitting the handlebar .................................................... 12
Dismantling and assembling the cutter ........................ 12
FUEL HANDLING
Fuel .............................................................................. 13
STARTING AND STOPPING
Starting and stopping ................................................... 14
MAINTENANCE
Maintenance ................................................................ 16
Air filter ......................................................................... 16
Spark plug .................................................................... 16
Muffler .......................................................................... 16
Cutter ........................................................................... 17
Changing the oil ........................................................... 17
Lubrication of the cutting height adjustment ................ 17
Drive and gearbox ........................................................ 18
Daily maintenance ....................................................... 18
Weekly maintenance .................................................... 18
Monthly maintenance ................................................... 18
TECHNICAL DATA
Technical data .............................................................. 19
EC-declaration of conformity ........................................ 20
English – 3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
•
Engine brake handle
Personal protection
WARNING!You must use personal
protection whenever you use the machine.
!
•
Vibration damping system
•
•
Hearing protection
Gloves must be worn when required, for example when
fitting, inspecting or cleaning cutting attachments.
•
•
Muffler
•
Always wear heavy, long pants. Do not wear shorts,
sandals or go barefoot.
Cutting equipment
Cutting cover and protective cover
On lawn mower M53 S Pro there is a protective cover
mounted over the drive's gearbox.
•
Wear sturdy, non-slip boots or shoes.
The protective cover is designed to reduce the risk of crush
injuries and to catch a broken drive belt.
Generally clothes should be close-fitting without restricting
your freedom of movement.
The cutting cover is designed to reduce vibration and to
reduce the risk of cuts.
′
Machine s safety equipment
Engine brake handle
This section describes the machine′s safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the ”What is
what?” section to locate where this equipment is positioned
on your machine.
The engine brake is designed to stop the engine. When the
grip on the engine brake handle is released the engine should
stop.
WARNING! Never use a machine that has
faulty safety equipment! Carry out the
inspection, maintenance and service
routines listed in this section.
!
On lawn mower M53 S Pro the engine brake handle should
also disengage the drive.
•
Cutting cover and protective cover
4 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
Vibration damping system
Checking,maintaining and servicing
Your machine is equipped with a vibration damping system
that is designed to minimize vibration and make operation
easier.
′
the machine s safety equipment
The handlebar system's steel tube and the cutting cover are
designed to minimise the vibrations from the engine.
This model also has a vibration damper fitted on the
handlebar unit to further reduce vibrations.
WARNING! All servicing and repair work on
the machine requires special training.This is
!
′
especially true of the machine s safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent.When you buy any of our
products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
The machine′s vibration damping system reduces the transfer
of vibration between the engine unit/cutting equipment and
the machine′s handle unit.
Checking the cutting cover and protective
cover
WARNING! Overexposure to vibration can
lead to circulatory damage or nerve damage
in people who have impaired circulation.
Contact your doctor if you experience
symptoms of overexposure to vibration.
These symptoms include numbness, loss of
feeling, tingling, pricking, pain, loss of
strength, changes in skin colour or
condition.These symptoms normally appear
in the fingers, hands or wrists.
!
Make sure the cutting cover is not damaged and that there are
no visible defects such as cracks.
Check that the protective cover is undamaged and that it is
properly secured.
Muffler
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
Checking the brake trigger
Place the lawn mower on firm, flat surface and start it. Make
sure that the cutter cannot come into contact with the ground
or other objects. See the instructions under the heading Start
and stop.
Apply full throttle and then release the brake handle.
WARNING! The exhaust fumes from the
engine are hot and may contain sparks
which can start a fire. Never start the
machine indoors or near combustible
material!
!
In areas with a hot, dry climate there is a high risk of fires.
These areas are sometimes controlled by legislation and
requirements that among other things the muffler must be
equipped with an approved type of spark arrestor mesh.
The engine brake should always be adjusted so that the
engine stops within 3 seconds.
On lawn mower M53 S Pro the engine brake handle should
also disengage the drive. Start the machine and engage the
drive by moving the clutch lever towards you.
For mufflers it is very important that you follow the instructions
on checking, maintaining and servicing your machine.
Apply full throttle and then release the brake handle. The
engine should stop and the drive should disengage.
WARNING! The muffler gets very hot in use
and remains so for a short time afterwards.
!
Do not touch the muffler if it is hot!
English – 5
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
The washer and cup spring should always be replaced when
changing the cutter or cutter bracket.
Vibration damping system
Check regularly that the vibration damping element is free
from cracks.
WARNING! Never use a machine with faulty
safety equipment.The machine’s safety
equipment must be checked and maintained
as described in this section. If your machine
fails any of these checks contact your
service agent to get it repaired.
!
The handlebar system's steel tube and the cutting cover are
designed to minimise the vibrations from the engine. Make
sure the cutting cover is not damaged and that there are no
visible defects such as cracks.
General safety precautions
•
A lawn mower is only designed to mow lawns. The only
accessories you can use with this engine unit are the
cutters we recommend in the Technical data chapter.
Muffler
•
Never use the machine if you are tired, if you have drunk
alcohol, or if you are taking medication that could affect
your vision, your judgement or your co-ordination.
Never use a machine that has a faulty muffler.
Regularly check that the muffler is securely attached to the
machine.
Cutting equipment
WARNING! Running an engine in a confined
This section describes how to choose and maintain your
cutting equipment in order to:
or badly ventilated area can result in death
due to asphyxiation or carbon monoxide
poisoning.
!
•
•
•
Reduces machine vibration.
Obtain maximum cutting performance.
Extend the life of cutting equipment.
•
•
You must use personal protection whenever you use the
machine.See the instructions under the heading Personal
protection.
Make sure the cutter does not hit foreign objects such as
stones, roots or the like. This can make the cutter dull and
bend the engine shaft.Always ensure the cutter is well ground
and balanced correctly. See also instructions under the
heading Maintenance.
Never use a machine that has been modified in any way
from its original specification.
Never use any accessories other than those recommended in
this manual. See instructions under the headings Cutting
equipment and Technical data.
Check the cutting attachment for damage or cracks. A
damaged cutting attachment should always be replaced.
WARNING! A faulty cutting attachment may
increase the risk of accidents.
!
Also check that the cutter bolt is undamaged and that the
engine shaft is not bent.
•
Never use a machine that is faulty. Carry out the checks,
maintenance and service instructions described in this
manual. Some maintenance and service measures must
be carried out by trained and qualified specialists. See
instructions under the heading Maintenance.
6 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
Before use:
Fuel safety
(Refuelling/Storage.)
WARNING! Fuel and fuel vapour are highly
inflammable.Take care when handling fuel
and engine oil. Bear in mind the risk of fire,
explosion and inhaling fumes.
!
•
•
Never refuel the machine while the engine is running.
Always ensure there is adequate ventilation when
refuelling and filling oil.
1
Check that the engine brake works correctly and is
undamaged. See the instructions under the heading
Checking the braking effect.
•
Move the machine at least 3 m from the refuelling point
before starting it.
2
3
4
5
6
7
Check that all handles and controls are undamaged and
free of oil.
Check that the anti vibration system works and is not
damaged.
Check that the muffler is securely attached and not
damaged.
Check that all parts of the lawn mower are tightened
correctly and that they are not damaged or missing.
Check that the cutter is undamaged and not cracked.
Replace the cutter if necessary.
•
Never start the machine:
Clean the air filter. Replace if necessary.
1
2
3
If you have spilt fuel or engine oil on the machine.Wipe
off the spill and allow the remaining fuel to evaporate.
Starting
If you spill fuel or engine oil on yourself or your clothes.
Change your clothes.
WARNING! Long-term inhalation of the
engine's exhaust fumes can represent a
health hazard.
If the machine is leaking fuel.Check regularly for leaks
from the fuel cap and fuel lines.
!
Transport and storage
•
•
•
Never start a lawn mower unless the cutters and all covers
are fitted correctly.
•
•
•
The fuel and engine oil tanks should be emptied before
longer periods of storage or when transporting the lawn
mower. Ask where you can dispose of surplus fuel and
engine oil at your local petrol station.
Never start the machine indoors. Exhaust fumes can be
dangerous if inhaled.
Observe your surroundings and make sure that there is no
risk of people or animals coming into contact with the
cutting equipment.
Always store the lawn mower and fuel so that any leakage
or vapours do not risk coming into contact with sparks or
naked flames. For example, electrical machines, electric
motors, relays/switches, boilers, or the like.
Always store fuel in an approved container designed for
that purpose.
•
•
Place the lawn mower on firm, flat surface and start it.
Make sure that the cutter cannot come into contact with
the ground or other objects.
Never twist the starter cord around your hand.
See the instructions under the heading Start and stop.
English – 7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
•
The brake handle must never be permanently anchored in
handle when the machine is running.
General working instructions
WARNING! This section describes basic
safety precautions for working with the lawn
mower.This information is never a
!
substitute for professional skills and
experience. If you get into a situation where
you feel unsure about how to progress, stop
and seek expert advice. Contact your dealer,
service agent or an experienced lawn mower
user. Avoid all usage which you consider to
be beyond your capability
Follow the instructions above, but do not use a lawn mower in
a situation where you cannot call for help in case of an
accident.
Basic mowing technique
Basic safety rules
WARNING! Make sure that your hands and
feet do not come near the cutting
attachment when the engine is running.
•
Look around you:
!
-
To ensure that people, animals or other things cannot
affect your control of the machine.
General
-
To make sure that none of the above might come into
contact with the cutting equipment.
•
Mowing slopes can be dangerous. Do not use the lawn
mower on very steep slopes.
•
•
Branches, twigs, stones, etc. should be removed from the
lawn before you start to mow. Make sure the cutter does
not hit foreign objects such as stones, roots or the like.
This can make the cutter dull and bend the engine shaft.
•
The lawn mower should not be used on inclines greater
than 15 degrees. Inclines that are too great can result in
fuel leakage
Never lift up the lawn mower or carry it around when the
engine is running. If you must lift the lawn mower, first
switch off the engine and disconnect the ignition lead from
the spark plug.
•
•
On sloping ground you should work along the slope. It is
much easier to work along a slope than it is to work up and
down it.
Branches, twigs, stones, etc. should be removed from the
lawn before you start to mow.
•
•
Do not use the machine in bad weather, such as dense
fog, heavy rain, strong wind, intense cold, etc. Working in
bad weather is tiring and often brings added risks, such as
icy ground.
•
•
Never lift up the lawn mower or carry it around when the
engine is running. If you must lift the lawn mower, first
switch off the engine and disconnect the ignition lead from
the spark plug.
Make sure you can move and stand safely.Check the area
around you for possible obstacles (roots, rocks, branches,
ditches, etc.) in case you have to move suddenly. Take
great care when working on sloping ground.
Make sure the cutter does not hit foreign objects such as
stones, roots or the like.This can make the cutter dull and
bend the engine shaft. A bent axle gives imbalance and
heavy vibration, which results in a great risk of the cutter
becoming loose.
•
•
The lawn mower should not be used on inclines greater
than 15 degrees. Inclines that are too great can result in
fuel leakage
The engine should be switched off when moving over
ground that is not to be mowed. For example, gravel
paths, stone, shingle, asphalt, etc.
If any foreign object is hit or if vibrations occur stop the
machine immediately. Disconnect the HT lead from the
spark plug. Check that the machine is not damaged.
Repair any damage.
•
Never mow more than 1/3 of the length of the grass. This
especially applies during dry periods. Mow first with the
cutting height set high.Then check the result and lower to
an appropriate height. If the grass is really long, drive
slowly and mow twice if necessary.
8 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
•
Never run with the machine when it is running.You should
always walk with the lawn mower.
•
To raise the cutting height move the lever to the left and
then backward.
Cutting height
Shut down the engine before changing the cutting height.
The cutting height adjustment is spring assisted. The cutting
height can be adjusted in five different steps.
Do not set the cutting height too low as there is a risk that the
cutters might hit slopes with unevenness.
Do not set the cutting height too low as there is a risk that the
cutters might hit slopes with unevenness.
Adjusting the cutting height
Shut down the engine before changing the cutting height.
Set the cutting height using the cutting height control on the
right-hand side of the lawn mower.
On lawn mowers with the type designation M48 Pro, proceed
as follows:
•
To raise the cutting height move the lever to the left and
then forward.
•
To lower the cutting height move the lever to the left and
then backward.
On lawn mowers with the type designation M53 S Pro,
proceed as follows:
•
To lower the cutting height move the lever to the left and
then forward.
English – 9
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT IS WHAT?
What is what on the lawn mower?
M48 Pro
10 Lower handlebar
11 Oil tank
1
2
3
4
5
6
7
8
9
Handle / handlebar
12 Fuel tap
Vibration damper
Engine brake handle
Starter handle
13 Air filter
14 Cutting cover
15 Cutter/cutting equipment
16 Cutter bolt
Throttle control/choke control
Cutting height control
Fuel tank
17 Cup spring
18 Cutter bracket
19 Engine shaft
20 Operator′s manual
Muffler
Spark plug
10 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT IS WHAT?
2
1
19
20
12
3
13
4
21
11
6
5
23
22
14
15
16
18
7
24
17
8
9
10
What is what on the lawn mower?
M53 S Pro
12 Lower handlebar
13 Oil tank
1
2
3
4
5
6
7
8
9
Handle / handlebar
Vibration damper
Engine brake handle
Throttle control/choke control
Starter handle
14 Fuel tap
15 Air filter
16 Cutting cover
17 Drive belt
18 Gear housing
19 Cutter/cutting equipment
20 Cutter bolt
Clutch lever
Cutting height control
Fuel tank
21 Cup spring
Muffler
22 Cutter bracket
23 Engine shaft
24 Operator′s manual
10 Protective cover
11 Spark plug
English – 11
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Always empty the fuel tank before you place the lawn mower
on its side.
Fitting the handlebar
Take care not to damage the cables and wires when you fold
up the handlebar.
Dismantling
•
Unscrew the bolt holding the cutter.
M48 Pro
Lift up the handlebar until the handlebar's upper tubular
construction comes directly opposite to the handlebar's lower
section. Tighten the knob correctly.
•
•
Remove bolt, washer and cup spring.
Remove the cutter.
Assembly
M53 S Pro
•
Position the cutter so that the cutting edge faces in the
direction of rotation.
Fold up the upper section of the handlebar by:
1
Fold in the engine brake handle towards the handlebar.
2
Lift up the handlebar until the handlebar's upper tubular
construction comes directly opposite to the handlebar's
lower section. Tighten the knob correctly.
•
Fit the cup spring, make sure it centres correctly on the
engine shaft.
•
Fit the washer and tighten the bolt correctly. The bolt
should be tightened with a torque of 45-60 Nm.
Dismantling and assembling the
cutter
WARNING! Always wear heavy-duty gloves
when servicing and maintaining the cutting
equipment.The cutters are very sharp and
cuts can occur very easily.
!
The ignition lead should always be removed from the spark
plug before repair, cleaning or maintenance work.
12 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
FUEL HANDLING
Only use recommended engine oil. See the Technical data
section.
Fuel
Fuelling
WARNING! Always ensure there is adequate
ventilation when handling fuel.
!
WARNING!Taking the following precautions,
will lessen the risk of fire:
Petrol
!
•
•
•
Use good quality unleaded or leaded petrol.
Use fuel with a low octane grade.
Do not smoke or place hot objects near fuel.
Always shut off the engine before refuelling.
If the machine is not used for some time the fuel tank
should be emptied and cleaned.
When refuelling, open the fuel cap slowly so
that any excess pressure is released gently.
Tighten the fuel cap carefully after refuelling.
Engine oil
Always move the machine away from the
refuelling area before starting.
Check the oil level before starting the lawn mower. A too low
oil level can cause serious damage to the engine.
Always remove the ignition lead from the spark plug before
refuelling.
•
For the best result and function use HUSQVARNA four-
stroke oil.
•
If HUSQVARNA four-stroke oil is not available, you may
use another four-stroke oil of good quality. Contact your
dealer when selecting oil. In general SAE 30 is
recommended.
•
Never use oil intended for two-stroke engines.
Check the oil level before starting the lawn mower. A too low
oil level can cause serious damage to the engine.
Clean around the fuel cap. Clean the fuel and oil tank
regularly. The fuel filter should be changed at least once a
year. Contamination in the tanks causes malfunction.
Oil level
Always move the machine about 3 metres from the refuelling
position before starting.
The lawn mower should stand on flat ground when you check
the oil level. Ensure the ignition lead has been removed from
the spark plug before you open the oil filler cap.
Unscrew the oil filler cap and check the oil level on the dipstick
fitted to the cover.
The oil filler cap must be completely screwed down to give a
correct picture of the oil level.
If the oil level is low, fill using engine oil up to the upper level
on the dipstick.
English – 13
Download from Www.Somanuals.com. All Manuals Search And Download.
STARTING AND STOPPING
Starting
Starting and stopping
On the M53 S Pro model disengage the drive on the wheel by
moving the clutch lever forward.
WARNING! Note the following before
starting:
!
Do not start a lawn mower unless the cutter
and all covers are fitted correctly. Otherwise
the cutter could come loose and cause
personal injuries.
Pull the engine brake handle against the upper handlebar
with your left hand.
Always move the machine away from the
refuelling area before starting.
Place the machine on a flat surface. Ensure
the cutting attachment cannot come into
contact with any object.
Grip the starter handle, slowly pull out the cord with your right
hand until you feel some resistance (the starter pawls grip),
now quickly and powerfully pull the cord.
On the M53 S Pro model
disengage the drive on the
wheel by moving the clutch
lever forward.
Never twist the starter cord around your hand.
Keep people and animals well away from the
working area.
Cold engine
Ensure the ignition lead sits correctly on the spark plug.
Disengage the choke position with the throttle control when
the engine is warm.
Starting: Open the fuel tap.
CAUTION! Do not pull the starter cord all the way out and do
not let go of the starter handle when the cord is fully extended.
This can damage the machine.
Choke: Set the throttle control in the choke position.
Warm engine
Use the same starting procedure as for a cold engine, but do
not set the throttle control in the choke position.
14 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
STARTING AND STOPPING
Drive
The model M53 S Pro is a self-propelled machine with the
drive on the front wheels.
To use the drive on the wheel pull the clutch lever towards
you.
Stopping
Set the throttle control in the idling position.
Stop the engine by releasing the engine brake handle.
On model M53 S Pro the drive is also disengaged when you
release the engine brake handle.
Close the fuel tap.
English – 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
When reassembling, make sure that the filter completely
seals against the filter holder.
Maintenance
WARNING! Make sure the cutting
attachment has stopped before cleaning,
carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
!
Spark plug
Air filter
WARNING! The muffler gets very hot in use
and remains so for a short time afterwards.
Do not touch the muffler if it is hot!
!
The air filter must be regularly cleaned to remove dust and dirt
in order to avoid:
If the machine is low on power, difficult to start or runs poorly
at idle speed: always check the spark plug first before taking
any further action. If the spark plug is dirty, clean it and check
that the electrode gap is 0.7-0.8 mm. The spark plug should
be replaced after about a month in operation or earlier if
necessary.
•
•
•
•
•
Carburettor malfunctions
Starting problems
Loss of engine power
Unnecessary wear to engine parts.
Excessive fuel consumption.
Clean the air filter daily, or more often in demanding
conditions.
The air filter is dismantled once the air filter cover has been
lifted off. Press in the catches on the top of the air filter cover
and lower the cover.
CAUTION! Always use the recommended spark plug type!
Use of the wrong spark plug can damage the piston/cylinder.
Muffler
The muffler is designed to reduce the noise level and to direct
the exhaust gases away from the operator. The exhaust
gases are hot and can contain sparks, which may cause fire
if directed against dry and combustible material.
Remove the air filter and check that it is undamaged.Replace
with a new air filter if you believe it to be defective.
Regularly check that the muffler is securely attached to the
machine.
Clean the filter by knocking the filter carefully against a hard
surface and blowing with compressed air from inside. Never
brush the dirt away. Replace the air filter if it is very dirty.
Never use a machine that has a faulty muffler.
An air filter that has been in use for a long time cannot be
cleaned completely.The filter must therefore be replaced with
a new one at regular intervals. A damaged air filter must
always be replaced.
16 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
•
Unscrew the oil filler cap.
Cutter
WARNING! Always wear heavy-duty gloves
when repairing the cutting attachment.The
blades are very sharp and can easily cause
cuts.
!
•
Drain the oil by tipping the engine so that the oil runs out
through the filler pipe.
It is important to have a sharp and correctly balanced cutter.
Loosen the bolt holding the cutter and leave the cutter at a
service workshop at least once a year for grinding and
balancing. An appropriate time to do this is after the mowing
season has finished.
•
•
•
Ask where you can dispose of surplus engine oil at your
local petrol station.
Fill with new engine oil of a good quality.See theTechnical
data section.
Check the oil level with the dipstick on the oil filler cap.The
oil filler cap must be completely screwed down to give a
correct picture of the oil level.
If the cutter or cutter bracket need to be changed you must
replace the cutter bolt, washer and cup spring at the same
time.
If the oil level is low, fill using engine oil up to the upper
level on the dipstick.
The bolt should be tightened with a torque of 45-60 Nm when
you fit the cutter again. See instructions under the heading
Assembly.
If the cutter hits foreign objects such as stones, roots or the
like the cutter will slip against the cutter bracket. This may
mean that the contact surface of the cutter bracket appears
slightly worn, which is completely normal. This is a safety
device, which reduces the risk of the engine shaft becoming
bent.
•
Screw on the oil filler cap.
Lubrication of the cutting height
adjustment
Changing the oil
The mechanical parts of the cutting height system should be
lubricated regularly (once a week). Lubricate the cutting
height system with a few drops of oil.
The engine oil should be changed each year and every 25
working hours.
When changing the oil proceed as follows::
•
Disconnect the HT lead from the spark plug.
•
•
Empty the fuel tank
Close the fuel tap.
English – 17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Drive and gearbox
Weekly maintenance
1
2
3
4
M53 S Pro
Ensure the wheels and wheel axles are clean and free from
leaves, grass, etc. It is also important to keep clean around
the drive gearbox.
•
Remove the protective cover by unscrewing the screws.
1
2
3
Change the engine oil.
Lubricate the cutting height system
Clean the spark plug. Check that the electrode gap is 0.7-
0.8 mm.
4
Clean the cooling fins on the cylinder.
•
Now guide the protective cover out under the stay and
over the drive axle.
Monthly maintenance
•
Clean the gearbox with a brush. Also check that the drive
belt and belt pulley are undamaged, for example, no
cracks.
1
Check that drive belt is not damaged and is not visibly
defective.
2
3
Clean the gearbox.
Check the fuel filter and the fuel hose. Replace if
necessary.
4
5
Clean the inside of the fuel tank.
Lubricate the drive control.
Below you will find some general maintenance
instructions.
Daily maintenance
1
2
3
Check that the engine brake handle works safely.
Brush leaves, grass and the like off of the lawn mower.
Clean the air intake on the starter. Check the starter and
starter cord.
4
5
6
7
Check the oil level.
Clean the air filter. Replace if necessary.
Check that nuts and screws are tight.
Check the cutting attachment. Never use blades that are
dull, cracked or damaged.
18 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL DATA
Technical data
M48 Pro
M53 S Pro
Engine
3
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
160
64
160
64
50
50
Power, kW
4,1
4,1
Ignition system
Type of ignition system
Spark plug
Transistor
Transistor
NGK - BPR6ES
0,7 - 0,8
NGK - BPR6ES
0,7 - 0,8
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre
Oil tank capacity, litre
1,1
1,1
0,55
0,55
Service classification SG - SJ; Service classification SG - SJ;
Engine oil
SAE 10W -30
SAE 10W -30
Weight
Lawn mower with empty tanks, kg
Noise emissions
30,3
35,4
(see note 1)
Sound power level, measured dB(A)
94
95
96
97
Sound power level, guaranteed L
Vibration levels
dB(A)
WA
(see note 2)
2
Handle left, m/s
3,6
3,5
3,5
3,8
2
Handle right, m/s
Cutting equipment
Cutting system
BioClip
BioClip
28-65
53
The cutting height can be adjusted in five different steps, mm. 28-65
Cutting width, cm
Cutter
48
Fixed
Fixed
Drive
Speed, km/h
----
4,5
Note 1: Noise emissions in the environment measured as sound power (L ) in conformity with EC directive 2000/14/EC.
WA
Note 2: Vibrations measured according to EN836 : 1997/A2:2001
English – 19
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL DATA
EC-declaration of conformity
(Applies to Europe only)
Höörs Plåt, Box 76, SE-243 22 Höör, Sweden, tel: +46-413-29600, declares under sole responsibility that the lawn mowers
Husqvarna M48 Pro and M53 S Pro from the serial numbers 030600001 and onwards comply with the requirements of the
COUNCIL’S DIRECTIVE:
of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
of June 22, 1998 ”relating to machinery” 98/37/EC.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN836:1997
Notified body:0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has compiled confirmity
assessment Report No. 01/901/020 - M48 Pro, 01/901/022 - M53 S Pro in accordance with Directive 2000/14/EC, Annex VI.
Höör January 3, 2003
Lennart Molin, Development manager
20 – English
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
´®z+H8|¶6d¨
´®z+H8|¶6d¨
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1140249-26
´®z+H8|¶6d¨
´®z+H8|¶6d¨
2003-12-17
Download from Www.Somanuals.com. All Manuals Search And Download.
We hope you find the links below useful. For further gardening information visit
Also See
Download from Www.Somanuals.com. All Manuals Search And Download.
|