Download from Www.Somanuals.com. All Manuals Search And Download.
CO
U
RECYC IN
F
NYO TE EVI I N
O e e
c
e
c
a
9
g
e
CO TIE E
MP R
DE
MER URIO DE E H R
O
RECIC AJE DE TE EVISORES S NYO
e
e
9
c
e c
e
e
CO
J T
E
7
0
e
e q
r e e
a
e
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: FCC Regulations state that improper modifications or unauthorized changes to
this unit may void the user’s authority to operate the unit.
ENERGY STAR® USER INFORMATION
ENERGY STAR User Information Statement: the factory default settings of this television meet
ENERGY STAR requirements. Changing Picture Settings may increase energy consumption,
possibly beyond the limits required for ENERGY STAR qualification.
To ensure your television is operating at an optimal energy efficiency, select default picture mode.
TRADEMARKS
Manufactured under license from Dolby Laboratories.
“Dolby“ and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and
other countries.
“As an Energy Star® Partner, Sanyo Electric co., Ltd. has determined that this
product meets the Energy Star® guidelines for energy efficiency.”
This symbol on the nameplate means the product is Listed by Intertek Testing
Services Taiwan Ltd. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and electrical hazards.
HANDLING PRECAUTIONS
PROTECTING THE LCD SCREEN
Handle by the cabinet only. Never touch the screen
when handling.
•
•
•
The screen can be damaged if it is not maintained
properly. Do not use hard objects such as hard
cloth or paper. Do not use excessive pressure when
cleaning the screen; excessive pressure can cause
permanent discoloration or dark
Excessive pressure on the screen can cause
permanent discoloration or dark spots.
Handling damage is not covered under warranty.
spots.
CONTAINS MERCURY LAMPS,
DISPOSE OF PROPERLY
NEVER spray liquids on the
screen.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS..2
FCC INFORMATION..................................3
HELPFUL HINTS - Problems / Solutions 28
SPECIFICATIONS .................................. 29
®
ENERGY STAR USER INFORMATION.3
CONFIGURATIONS OF VGA
TERMINALS ..................................... 30
TRADEMARKS ..........................................3
PROTECTING THE LCD SCREEN.............3
HANDLING PRECAUTIONS .......................3
PC / HDMI SIGNAL MODES.................. 30
INSTALLING AND UNINSTALLING
STAND ..................................................5
INSTALLATION ..........................................6
POSITIONING THE LCD HDTV..................6
WALL MOUNTING (OPTIONAL).................6
GETTING STARTED..................................7
PReCAUTIONS ............................................7
GETTING STARTED-CONTROLS AND
JACKS....................................................8
REMOTE CONTROL OPERATION.............9
GETTING STARTED-CONNECTIONS.....10
POWER CONNECTION ............................11
INITIAL SETUP...........................................11
INITIAL CHANNEL SCAN ..........................11
GETTING STARTED-POWER
CONNECTION/CHANNEL SEARCH.11
ADVANCED AV CONNECTIONS.......... 12
ADVANCED DIGITAL SIGNAL
CONNECTIONS-HDMI TO HDMI.......12
DVI TO HDMI ..............................................12
DIGITALAUDIO ..........................................12
AUDIO OUT JACKS...................................12
PC CONNECTIONS................................ 13
PC MONITOR OPERATION......................13
SPORTS MODE ...................................... 14
ON-SCREEN MENU OPERATION ................ 15
MENU NAVIGATION MAP.........................15
CHANNELADJUSTMENT.........................15
CHANNEL LIST OPERATION ...................16
PARENTADJUSTMENT............................17
PICTURE/ AUDIO/ ADVANCED
ADJUSTMENT.....................................19
PICTURE.....................................................19
AUDIO..........................................................19
ADVANCED.................................................20
SYSTEM......................................................22
USB PHOTO VIEWER...............................25
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING AND UNINSTALLING STAND
CAUTION INSTALLING STAND
When holding (moving or lifting) the LCD Display, hold the display’s body. Do not handle the LCD TV by holding
the attached accessory parts (speakers), otherwise it may result in damage.
•
•
Before installing, provide a desk (or a part of it) which is strong enough to support the weight of the LCD TV
and its stand. The desk must be larger than the LCD Display's screen size. The desk's surface must be flat and
covered with soft material (such as a blanket) for protecting the screen surface.
Before putting the LCD Display on the desk, make sure there is no object on it. Leaving any object under the
screen may cause damage on the screen.
The LCD TV with this stand should be installed on a flat and level place. Do not place it on non flat, unlevel or
unstable cart or stand. The display may fall, causing not only serious damage to the products but serious injury
to a person.
•
•
SAFETY NOTE
For correct installing, mounting and uninstalling of the LCD TV Stand, it is strongly recommended to use a trained,
authorized dealer. Failure to follow correct procedures could result in damage to the equipment or injury to the
installer.
Installing Stand (55")
1
Place the LCD TV on a flat surface place where
maintained with soft materials (such as a blanket) for
protecting the display screen.
2
Secure the stand to the TV with 4 screws.
3
4
1
2
Uninstalling Stand (55")
1
Place the LCD TV screen facing down on a flat
surface with soft materials (such as a blanket) for
protecting the display screen.
2
Remove screws in 4 holes with screw driver.
3
4
1
2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
POSITIONING THE LCD HDTV
Always use a firm-flat surface when positioning
your HDTV. Do not position the unit in a confined
area. Allow adequate space for proper ventilation.
52.3
4
36.5
33.5
3
29.3
14.9
NOTE: All dimensions are in inches.
* Diagonal screen: 54.6 inches
(OPTIONAL)
WALL MOUNTING
Use the screws that are threaded into the stand-
mounting inserts on the back of your HDTV to secure it
to a wall mounting kit.
NOTE: 1. Wall Mounting kit is not supplied.
2. Wall mounting kit shall be able to sustain at least 3
times of set weight.
VESA standard interface:
TV 200 x 400mm
Wall Mounting Inserts
Mounting screws measurements:
55” TV
M8 Diameter, Length - 13mm (min.); 16mm (max.)
Wall
(60mm)
•
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Install batteries in the Remote.
1
PRECAUTIONS
Do not use rechargeables together
with dry cells, other types,
mixed new and old or batteries with
different charge levels.
Do not expose the Remote or
batteries to moisture or heat such as sunshine.
(the size of battery is AAA).
Match the “+” and “-” signs on the batteries with marks
inside the Remote Control.
Please recycle used up batteries.
Antenna Connection for off-air signals.
2
ANALOG/DIGITAL
ANTENNA IN
ANTENNA
OR
CABLE
THE TUNER IN THIS HDTV CAN RECEIVE:
Digital and Analog off-air signals from an antenna.
a.
b.
OR
Analog or Clear QAM cable channels from a direct
Cable TV connection.
NOTES:
You must use the on-screen MENU to Search
for Clear QAM Cable channels. (see page 11)
For the best picture, connect your Cable box
or Satellite receiver to HDMI or component
(VIDEO3) jacks.
This HDTV can receive ANY unscrambled RF
signal being broadcast.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED-CONTROLS AND JACKS
LEFT-SIDE
PANEL
Y
PC INPUT
PC AUDIO
INPUT
BACK-SIDE PANEL
Pb
Pr
L
Pb
Pr
L
Y/VIDEO
DV
INPUT1
INPUT2
L
R
ANT
R
R
DEO3 INPUT
V DEO2 INPUT
Input / OK
button
COMPOSITE VIDEO INPUT VIDEO1, PAGE 10
- Standard (composite) video and audio inputs
while using video devices with analog audio and
composite video output.Connect digital video
equipment to the Video Yellow jack, and matching
Audio White (L) and Red (R) jacks.
PC AUDIO INPUT, PAGE 12, 20 - This terminal is
not only using for PC audio input but also sharing
the HDMI audio input for DVI signal connecting.
PC INPUT (RGB connector of 15 pin D-SUB)
,
PAGE 13 - Connect computer to this terminal.
Audio is separated from another Stereo Mini Jack
(PC AUDIO INPUT).
COMPONENT VIDEO INPUT VIDEO2 or
VIDEO3(YPbPr), PAGE 10 - Connect digital video
STEREO AUDIO OUT (L/R) JACKS, PAGE 12
Connect stereo audio equipment to these jacks.
-
equipment to the Video Green (Y), Blue (Pb), Red
(Pr) jacks, and matching Audio White (L) and Red
(R) jacks. These jacks will automatically detect
the received signal type.
USB PORT, PAGE 25 - Use for updating the
television’s firmware and accessing JPEG files.
DIGITAL AUDIO OUT (Coaxial), PAGE 12 - Use
a Phono-Type (Coaxial) Digital Audio Out Cable
to connect Digital Audio Output to an advanced
stereo home theater system equipped with Dolby®
Digital.
ANALOG / DIGITAL ANTENNA INPUT, PAGE 7
- Connect a RF antenna or Analog Cable system
to this jack.
HDMI INPUT (INPUT1, INPUT2 or INPUT3)
,
PAGE 12 - A digital AV interface that accepts
uncompressed video signals for the best picture.
This HDMI input supports HDCP copy protection
and allows transmission of copy-protected digital
contents.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL OPERATION
MUTE Button- Press to mute or restore the sound.
Numeric Buttons- Press numeric buttons to select a
channel.
Example: Press 6 then OK button to select analog
channel A6. Press 6 then 1-- button to select digital
channel D6.
INPUT Button- Press to select the source to view: TV,
VIDEO1, VIDEO2, VIDEO3, HDMI1, HDMI2, HDMI3,
PC or USB Input.
SPORTS Button- Press to choose options Football,
Winter Sports, Marine Sports, Indoor Sports, and Off
in turn.
ECO Button - Press to select Energy saving mode
options Off, ECO1, ECO2, and ECO3 in turn.
Volume Up / Down (VOL+ / - )Buttons- Press to
decrease or increase the audio volume.
PIX SHAPE Button- Press to choose options Stan-
dard, WaterGlass, Zoom1, Full and Zoom2. Available
options depend on the signal and the aspect ratio of
the broadcast.
AUDIO Button- Press to select the desired audio
mode, if available.
MENU- Press to display on-screen menu.
CURSOR ▲ (up) ▼ (down) Buttons - Press these
buttons to move the cursor up and down.
CURSOR ◄ (left) ► (right) Buttons - Press hese but-
tons to move the cursor left and right.
OK Button - Press to select an option from the menu,
when required.
EXIT Button - Press to exit from the menu.
NOTE : The Channel Scan Memory database will be
reset to default (all analog channel enabled). You will
need to execute Channel Scan after RESET.
1-- Button - Press numeric button then press this but-
ton to select digital channel.
SLEEP Button- Press this button to set Off Timer
function among Off, 30 min, 60 min, 90 min, 120 min,
150 min and 180 min.
GUIDE Button- Press to show the information window
about the current channel on your HDTV screen.( only
for digital channels).
NOTE : The Off Timer will be canceled when the TV is
turned off or when a power failure occurs.
INFO Button- Press to display channel information
banner.
Digital Banner may contain: Channel Number, CC
State, Channel Title, Video Resolution, Video Ratio,
Signal Strength, Digital Sound information and Pro-
gram Rating.
CAPTION Button- Press this button to switch CC
mode among “Off“, “CC Display“ and “Muted=On“.
Digital Captions can be changed through the SYSTEM
CC Stytle Settings from menu.
Analog Banner may contain: Channel Number, CC
State, Channel Title, Video Resolution, Analog Sound
information, and Program Rating.
RECALL Button- Press to switch to the last channel
or input source.
Channel Up / Down (CH+ / - ) Buttons- Press to
switch to the last or next channel.
RESET Button - Press this button to display RESET
menu. If you execute RESET function, the TV will
clear all customized settings.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED-CONNECTIONS
Analog Signal Connections - VIDEO1 or VIDEO2
(Shared with Component-Y).
3
Press the INPUT button to select the input
signal as VIDEO2 or VIDEO3(YPbPr).
3
Connect an analog device such as an Analog
Cable Box, Satellite Receiver or VCR.
NOTES:
The VIDEO2 with Green video jack, White and Red
audio jacks can be used as Composite connectors
like VIDEO1 (Shared with Component-Y).
•
Composite connectors are included on your HDTV
to provide continued compatibility with older analog
devices such as a VCR. (Cables are not supplied)
You may follow the VIDEO2 OPERATION to choose
suitable function (Video or YPbPr) for external
devices.
•
1
Connect an AV cable to the VIDEO1 or VIDEO2
jack on the HDTV and to your analog AV
equipment as shown. Match the connector
colors to jack colors.
2
Press the INPUT button to step through the
signal inputs to select Video1 or Video2
.
DVD PLAYER
SATELLITE
RECEIVER
ANALOG DEVICE
Component Signal Connections - VIDEO2 or
VIDEO3 (YPbPr)
4
Connect Digital devices such as a HD Cable
Box, HD Satellite Receiver, DVD Player, and
Game System.
The Component jacks on this HDTV will
accept HDTV, EDTV, and SDTV video signals
and make a great choice for Component when
connecting your compatible external devices.
1
Connect a COMPONENT cable to set Green,
Blue, and Red video jacks asVIDEO2 or
VIDEO3(YPbPr) on the HDTV andto your digital
device as shown. (Cable is not supplied)
2
Connect an AUDIO cable to the matching
White and Red audio jacks as shown. (Cable
is not supplied))
10
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED-POWER CONNECTION/CHANNEL SEARCH
POWER CONNECTION
Plug in AC power cord
(120V AC, 60Hz)
5
Press the POWER
button, (Follow the
6
on-screen instructions).
To 120V AC outlet.
INITIAL SETUP
Use the CURSOR ▲ and ▼ buttons to highlight
Store or Home. Press the OK button. TVs will enter
7
INITIAL CHANNEL SCAN automatically.
Store : This mode is for the retail display setup.
Home : This mode qualifies for ENERGY STAR.
OK
Move
Enter
INITIAL CHANNEL SCAN
NOTE : Skip the following process if there is no cable or
antenna being plugged-in to tuner connector.
Use the CURSOR ▲ and ▼ buttons to highlight the
8
Channel Scan. Press the OK button. Choose the
Scan to start the channel scanning. The scanned
channels are stored in Channel List and can be
scanned using the CURSOR ▲ and ▼ buttons.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED AV CONNECTIONS
ADVANCED DIGITAL SIGNAL
CONNECTIONS-HDMI TO HDMI
DIGITAL AUDIO
Connect the Digital Audio output to a
multichannel receiver as shown.
1
Connect compatible Digital devices such as a HD
Cable Box, HD Satellite Receiver, DVD Player, and
Game System.
NOTE: NOTE: Dolby Digital audio signal is available
from the Digital Audio output terminal only when
receiving a part of a Digital input on the screen.
HDMI-High-Definition Multimedia Interface.
BACK-SIDE VIEW OF HDTV
This is a digital AV interface that accepts uncompressed
video signals for the best picture quality possible. It
supports HDCP copy protection and allows transmission
of copy-protected digital content. The signal can also
include Dolby® Digital or PCM audio when available.
(Coaxial)
DIGITAL
AUDIO CABLE
(Not supplied)
1
Connect the HDMI input and your external
device with HDMI cable.
NOTE : Press the INPUT button to select the input signal
as HDMI1,HDMI2 or HDMI3.
MULTICHANNEL
RECEIVER
DVI TO HDMI
(ONLY HDMI1 IS COMPATIBLE WITH THIS FUNCTION)
Use an adapter (not supplied) to connect a DVI
device to a HDMI1 input jack.
1
NOTE : HDMI Audio setting is necessary. (refer to page
20)
AUDIO OUT JACKS
Connect the audio out of the device to the PC
AUDIO INPUT.
2
Connect the Audio output to a multichannel
1
receiver as shown.
BACK-SIDE VIEW OF HDTV
BACK-SIDE VIEW OF HDTV
Cable not
supplied
SATELLITE
RECEIVER
PC
STEREO
AMPLIFIER
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PC CONNECTIONS
NOTE: Before connecting any cables, disconnect
the AC Power Cords of both the HDTV and
Personal Computer from the AC outlets.
PC MENU- AUTO ADJUSTMENTS
OPERATION
Use the CURSOR ▲ and ▼ buttons on the
1
Connect a RGB cable from the monitor output on
your PC to the RGB connector on the HDTV and
tighten the screws. (Monitor Cable not supplied).
1
remote control to highlight the Auto Adjust
in the PC menu. Press the OK button to start
automatically adjust function.
Insert one end of a Stereo Mini-Audio cable into the
2
PC Audio Out jack and the other end into the HDTV
PC AUDIO INPUT jack. (Stereo Mini-Audio Cable not
supplied).
PC MENU- MANUAL ADJUSTMENT
OPERATION
The Clock, Phase, Horizontal Position, and Vertical
Position are set automatically when Auto Adjustment is
completely done.
HINT: Volume can be adjusted both from the PC and the
HDTV VOLUME + /
-
buttons.
Select Auto Adjustment from the PC Setup Menu.
3
Clock- Adjust the Dot frequency to match the dot
frequency of your computer.
NOTE: Power on the HDTV and any other
peripheral equipment before powering on the
computer.
Phase- Adjust the phase when the picture appears
flicker or blur.
H-Position- Move the image horizontally.
PC MENU NAVIGATION MAP
V-Position- Move the image vertically.
Use the CURSOR ▲and ▼ buttons on the remote
control to highlight H-Position, V-Position, Clock
1
or Phase. Press the OK button.
Use the CURSOR ◄ and ► buttons to adjust the
value of setting. Press the MENU button to return.
2
Press the EXIT button on the remote control to
exit the current menu.
3
PC MENU OPERATING TIPS
The Picture settings in the PC input will not affect other
input settings.
PC MONITOR OPERATION
PC PREPARATION
To avoid a “No Support“ condition, preset your PC’s
output resolution to a XGA value such as 1024 x 768
before you disconnect it from your regular monitor.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SPORTS MODE
By simply pressing the SPORTS“ button on the
“
remote control, the TV will automatically optimize
both picture and sound settings for the programs
shown.
■
Off
■
Football
− For golf, football programs etc.
− Fresh greenness of the lawn
− Enfolding cheering voices, ball hitting sounds
■
Winter Sports
− For skiing, ice skating programs etc.
− Details kept white, vivid color of costume
− Enhanced skiing/skating sounds
■
Marine Sports
− For swimming, diving programs etc.
− Sparkling blue of sea, azure sky
− Delightful splashing and surf sounds
■
Indoor Sports
− For basketball, boxing programs etc.
− Alive reddish flesh
− Clear announcements, powerful banging sounds
NOTE : When the "SPORTS" button is pushed, an OSD
showing the current sports mode will appear on
the lower left of the screen. Once the channel or
the input source is changed, the sports mode will
automatically be set to "Off", and the "Sports Off"
OSD will appear on the upper right of the screen.
If the channel or input source is changed under the
"Sports Off" status, the "Sports Off" OSD will not
appear on the upper right of the screen.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU OPERATION
MENU NAVIGATION MAP
CHANNEL ADJUSTMENT
MAIN MENU SUB-MENU OPTIONS
SIGNAL SOURCE OPERATION
There are two categories:
●
●
Air
Cable
AIR(Antenna) Search: It will search for analog and digital
channels that are broadcasted over-the-air.
Cable Search: It looks for analog cable channels and
unscrambled (Clear QAM) digital cable channels.
Press the MENU button on the remote control to
display the Main menu. Use the CURSOR ◄ and ►
1
buttons to highlight CHANNEL. Press the OK button.
Highlight Air or Cable. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to highlight
All. Press the OK button. (A red hook will appear
3
beside the selected item).
Use the CURSOR ▲ and ▼ buttons to highlight
Channel Scan. Press the OK button. Choose the
4
Scan to start the channel scanning.
OK
MENU
EXIT
Exit
Move
Enter
Return
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU OPERATION (CONTINUED)
DELETING CHANNELS FROM THE CHANNEL LIST
CHANNEL LIST OPERATION
Use the CURSOR ▲ and ▼ buttons to highlight
the Channel List. Press the OK button.
1
2
3
4
The Channel List is a database of active channels you can
scan through using the CURSOR ▲ and ▼ buttons.
Customize it by deleting or adding channels.
Use the CURSOR ◄ and ► buttons to change
pages.
Use the CURSOR ▲ and ▼ buttons to select and
highlight the channel you want to delete.
Press the MENU button on the remote control to
display the Main menu.
1
Press the VOL+ button to delete the channel from
the Channel List. (A white Y will disappear in the
squared region. This means the channel has been
deleted from the Channel List.)
Use the CURSOR ◄ and ► buttons to highlight
CHANNEL mode. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to highlight
3
Channel Scan. Press the OK button. Make the
channel scan process completely, then press OK
or Menu to exit.
RENAMING CHANNELS FROM THE CHANNEL LIST
You can rename each channel of the Channel List with
following operation:
ADDING CHANNELS TO CHANNEL LIST
Use the CURSOR ▲ and ▼ buttons to highlight
the Channel List. Press the OK button.
1
Use the CURSOR ▲ and ▼ buttons to highlight
the Channel List. Press the OK button.
1
Use the CURSOR ◄ and ► buttons to show
more unshowed channels.
2
Use the CURSOR ◄ and ► buttons to change
pages.
2
Use the CURSOR ▲ and ▼ buttons to select and
highlight the channel you want to rename.
3
Use the CURSOR ▲ and ▼buttons to select and
highlight the channel you want to add.
3
Press the INFO button.
4
5
Press the VOL+ to add the channel to the
4
Use 0 ~ 9 buttons to type the channel renaming with
each appointed English word, numbers, and symbols
Channel List. (A white Y will appear in the squared
region. This means the channel is added to the
Channel List.)
by continuously pressing. (HINT: Use CURSOR
◄
and ► buttons to move forward or backward. Use 1--
button to delete.)
Press the INFO button to confirm.
6
Number Button
Characters
0.,?!`-()@/+=
1
Number Button
Characters
JKLjkl5
0
1
2
3
4
5
6
7
8
9
MNOmno6
PQRSpqrs7
TUVtuv8
ABCabc2
DEFdef3
GHIghi4
WXYZwxyz9
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU OPERATION (CONTINUED)
V-Chip OPERATION
PARENT ADJUSTMENT
This TV follows the restricted channels broad casting
setting within MPAA and TV Rating option in PARENT
menu.
Press the MENU button and then use the CURSOR
◄ and ► buttons to highlight PARENT. Press the OK
1
button.
Enter your password. If the password is correct, it
2
will automatically return to the PARENT menu. If the
password is wrong, you can enter the password again
or press MENU button to return to the PARENT menu.
Use the CURSOR ▲ and ▼ buttons to highlight
V-Chip. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select On,Off
4
This SANYO television is equipped with an electronic V-Chip
to interpret MPAA (Motion Picture Association of America)
and TV Parental Guidelines rating codes. When these codes
are detected, the HDTV will automatically display or block
the program, depending upon choices you make when
setting up the PARENT menu.
or Reset. Press the OK button
.
Lock- Block the broadcast of the current displayed
channel directly or current source input.
Press the MENU button and then use the CURSOR
◄ and ► buttons to highlight PARENT. Press the OK
1
Use this feature to automatically block programs with content
you deem as inappropriate for your children to view.
button.
Enter your password. If the password is correct, it
2
will automatically return to the PARENT menu. If
the password is wrong, you can enter the password
again or press MENU button to return to the
PARENT menu.
Use the CURSOR ▲ and ▼ buttons to highlight
Lock. Press the OK button.
MORE INFORMATION
Additional information about MPAA and V-Chip rating
can be found at:
3
PASSWORD SETTING
Select On or Off. Press the OK button.
4
You will need to set a passowrd when using this TV
and entering the PARENT menu for the first time.
Enter this password to access the PARENT menu
from the second time.
Note:Turn on V-Chip function,you can operate V-Chip
Adjust.
V-Chip Adjust OPERATION
STANDARD- Decides which kind of classified channel in the
Channel List can be viewed.
Press the MENU button and then use the CURSOR
◄ and ► buttons to highlight PARENT menu. Press
1
the OK button.
Use the 0 - 9 buttons to enter “NEW PIN“ (the new
password you want to assign). Press the OK button.
You can block portions of the TV rating by choosing one or
more of the content ratings (D, L, S, V and FV).
2
By blocking just the L and S content ratings of TV-14, for
example, TV-14 rated programs with a D and V content
rating could still be viewed.
Use the 0 - 9 buttons to enter “Confirm“ numbers.
Press the OK button.
3
NOTE : Please carefully remember new password. If you
forget the former password, press 1-- button 4 times
to reset password.
Press the MENU button and then use the CURSOR
◄ and ► buttons to highlight PARENT. Press the OK
1
button.
Change password OPERATION
Enter your password. If the password is correct,
2
it will automatically return to the PARENT menu.
If the password is wrong, you can enter the
password again or press the MENU button to
return to the PARENT menu.
Use the CURSOR ▲ and ▼ buttons to highlight V-Chip
Adjust for TV Rating. Press the OK button.
Press the MENU button and then use the CURSOR ◄
and ► buttons to highlight PARENT menu. Press the
1
OK button.
Enter password. If the password is correct, it will
2
3
automatically return to PARENT menu. If the
password is wrong, you can enter password again
or press MENU button to return to PARENT menu.
Use the CURSOR ▲ and ▼buttons to select the
4
options you want to adjust and press the OK button.
(MPAA,Block All,TV-Y,TV-Y7,TV-G,TV-PG,TV-14,and
TV-MA.)
Use the CURSOR ▲ and ▼ buttons to highlight
Change Password. Press the OK button.
3
Use the CURSOR ▲ and ▼buttons to select the
options you want to adjust and press the OK button.
Then the option you selected will be locked.
5
Use the 0 - 9 buttons to enter the "OLD PIN" (the
4
former password), "NEW PIN" (the new password
you want to assign), and enter "Confirm" numbers
in turn. Press the OK button.
(A yellow lock will appear in the squared region).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU OPERATION (CONTINUED)
MPAA OPERATION
V-Chip Adjust OPERATION
MPAA- Decides which kind of classified movie rating signal
can be viewed.
ADVANCED- For V-chip Regional Rating5(RRT5). An
advanced V-Chip ratings system for digital channels that are
received with an antenna.
Press the MENU button and then use the
CURSOR ◄ and ► buttons to highlight PARENT.
1
When the HDTV detects compatible RRT5 data, it is
downloaded and stored in memory and the menu is modified
to include advanced adjustment option.
Press the OK button.
Enter your password. If the password is correct, it
2
will automatically return to the PARENT menu. If
the password is wrong, you can enter the password
again or press MENU button to return to the
PARENT menu.
Press the MENU button and then use the CURSOR
◄ and ► buttons to highlight PARENT. Press the
1
OK button.
Use the CURSOR ▲ and ▼ buttons to highlight V-Chip
Adjust. Press the OK button.
3
Enter your password. If the password is correct, it
2
will automatically return to PARENT menu. If the
password is wrong, you can enter password again
or press the MENU button to return to the PARENT
menu.
Use the CURSOR ▲ and ▼ buttons to highlight MPAA
for movie Rating. Press the OK button.
4
Use the CURSOR ▲ and ▼ buttons to select the
setting you want to adjust and press the OK button.
(A yellow lock will appear in the squared region).
5
Use the CURSOR ▲ and ▼ buttons to highlight
V-Chip Adjust. Press the OK button.
3
CAN ENGLISH OPERATION
Use the CURSOR ► buttonto highlight
ADVANCED.
4
Press the MENU button and then use the CURSOR
◄ and ► buttons to highlight PARENT. Press the
OK button.
1
Use the CURSOR ▲ and ▼ buttons to select the
option you want to adjust. Press the OK button.
(Dim0,Dim1,Dim2 or Dim3)
5
Enter your password. If the password is correct, it
2
Use the CURSOR ▲ and ▼ buttons to select the
6
will automatically return to PARENT menu. If the
password is wrong, you can enter password again or
press the MENU button to return to PARENT menu.
option you want to adjust. Press the OK button.
Then the option you selected will be locked. (A
yellow lock will appear in the squared region).
Use the CURSOR ▲ and ▼ buttons to highlight
3
NOTE : If current program stream is without RRT5 data,
this function will be grayed out. This function is only
effective for digital channels including RRT5 data.
Can English. Press the OK button
.
Use the CURSOR ▲ and ▼ buttons to select
the setting you want to adjust and press the OK
button. (A yellow lock will appear in the squared
region).
4
CAN FRENCH OPERATION
Press the MENU button and then use the CURSOR
◄ and ► buttons to highlight PARENT. Press the
1
OK button.
Enter your password. If the password is correct, it
2
will automatically return to PARENT menu. If the
password is wrong, you can enter password again
or press the MENU button to return to PARENT
menu.
Use the CURSOR ▲ and ▼ buttons to highlight
Can French. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select the
setting you want to adjust and press the OK button.
4
(A white mark will appear in the squared region.)
NOTE : Press the OK button to make or cancel the selected
settings. A lock symbol will appear beside the
selected rating option indicating that it is blocked.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO2 OPERATION
PICTURE/ AUDIO/ ADVANCED
ADJUSTMENT
Press the MENU button to display the Main menu.
1
2
3
4
Press the OK button.
PICTURE
Use the CURSOR ◄ and ► buttons to highlight
PICTURE. Press the OK button.
Use the CURSOR ▲ or ▼ buttons to highlight
Video2. Press the OK button.
Use the CURSOR ▲ and ▼ buttons to select
YPbPr or Video. Press the OK button.
RESET PICTURE OPERATION
Reset Picture- Make the previous adjustment settings
under the PICTURE mode recovered from the factory
default value.
Use the CURSOR ◄ and ► buttons to highlight
PICTURE. Press the OK button.
1
Use the CURSOR ▲ and ▼ buttons to highlight
Reset Picture. Press the OK button.
2
ADJUSTING THE PICTURE LEVELS
PICTURE MODE OPERATION
Use the CURSOR ▲ and ▼ buttons to select
Reset or Cancel. Press the OK button.
3
Press the MENU button on the remote control to
1
display the Main menu.
NOTE : Press the MENU button to return to the PICTURE
Use the CURSOR ◄ and ► buttons to highlight
PICTURE. Press the OK button.
mode menu.
2
AUDIO
Use the CURSOR ▲ and ▼ buttons to select the
Picture Mode. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select the
Cinema, Standard, Vivid or User. Press the OK
4
button to add a red hook in the blank space.
BRIGHTNESS/ CONTRAST/ SATURATION/ HUE/
SHARPNESS OPERATION
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ◄ and ► buttons to highlight
PICTURE. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to select
the Brightness, Contrast, Saturation, Hue or
3
Sharpness. Press the OK button.
SOUND MODE OPERATION
Use the CURSOR ◄ and ► buttons to adjust the
picture setting.
4
Press the MENU button on the remote control to
display the Main menu.
1
NOTE:
Use the CURSOR ◄ and ► buttons to highlight
AUDIO. Press the OK button.
2
These items will be grayed out if you are not select the
User mode.
•
Use the CURSOR ▲ and ▼ buttons to select Sound
Mode. Press the OK button.
3
User mode (Picture Mode) will allow to adjust brightness,
contrast,saturation,hue and sharpness function by user.
•
Use the CURSOR ◄ and ► buttons to adjust the
audio setting.(Off/Rock/Pop/Jazz/Vocal/User).
4
COLOR TEMPERATURE OPERATION
Press the MENU button to display the Main menu.
1
NOTES:
Press the OK button.
User mode (Sound Equalizer) will allow to adjust
frequency response from 100Hz to 10kHz by user.
•
Use the CURSOR ◄ and ► buttons to highlight
PICTURE. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to select frequency.
•
•
Use the CURSOR ▲ and ▼ buttons to highlight
Color Temperature. Press the OK button.
3
Use the to CURSOR ◄ and ► buttons to adjust the
frequency setting.
Use the CURSOR ▲ and ▼ buttons to select
Warm, Normal or Cool. Press the OK button.
4
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the CURSOR ▲ and ▼ buttons to highlight
HDMI Audio. Press the OK button.
ADJUSTING THE AUDIO LEVELS
TREBLE/ BASS/ BALANCE OPERATION
3
4
Use the CURSOR ▲ and ▼ buttons to select
Auto, Digital or Analog option. Press the OK
button. (A red hook will appear in the white blank
space).
Press the MENU button on the remote control to
display the Main menu.
1
2
3
4
Use the CURSOR ◄ and ► buttons to highlight
AUDIO. Press the OK button.
RESET AUDIO OPERATION
Use the CURSOR ▲ and ▼ buttons to select Treble,
Bass or Balance. Press the OK button.
Reset Audio- It can reset previous adjusting settings during
the AUDIO mode to the factory default value.
Use the CURSOR ◄ and ► buttons to adjust the
audio setting.
Use the CURSOR ◄ and ► buttons to highlight
AUDIO. Press the OK button.
1
BASS BOOST OPERATION
Use the CURSOR ▲ and ▼ buttons to highlight
the Reset Audio. Press the OK button.
2
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ▲ and ▼ buttons to select
Reset or Cancel. Press the OK button.
3
Use the CURSOR ◄ and ► buttons to highlight
AUDIO. Press the OK button.
2
NOTE : Press the MENU button to return to the AUDIO
Use the CURSOR ▲ and ▼ buttons to highlight
Bass Boost. Press the OK button.
3
menu.
Use the CURSOR ▲ and ▼ buttons to highlight
Off, Low or High. Press the OK button.
4
ADVANCED
SURROUND OPERATION
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ◄ and ► buttons to highlight
AUDIO. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to highlight
Surround. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to highlight
Off, Low or High. Press the OK button.
4
HDMI AUDIO OPERATION
HDMI AUDIO SETTINGS
SPORTS OPERATION (See PAGE 14)
HDMI1 includes three categories, Auto, Digital and
Analog. (Default setting is Auto)
For the other HDMI port, the HDMI Audio setting will be
blocked out and fixed in Digital.
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
Auto- During this setting, the system will analyze
HDMI1 signal type (by info frame) to detect if this input
source is pure HDMI or DVI signal. Then it will select
the audio input signal from HDMI port or PC AUDIO
INPUT port automatically (refer to page 13).
Use the CURSOR ▲ and ▼ buttons to select
Sports. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select
Off, Football, Winter Sports, Marine Sports or
4
Digital- During this setting, the audio input signal will be
Indoor Sports. Press the OK button.
fixed to the HDMI1 port.
NOISE REDUCTION OPERATION
NOTE : If the HDMI is a DVI signal type, there will be no
sound output.
Press the MENU button on the remote control to
1
display the Main menu.
Analog- During this setting, the audio input signal will
be fixed to PC AUDIO INPUT port.
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
NOTE : Even though the HDMI is pure HDMI type, the audio
still is selected from the PC AUDIO INPUT port.
Use the CURSOR ▲ and ▼ buttons to select
Noise Reduction. Press the OK button.
3
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ▲ and ▼ buttons to select Off,
Weak, Medium or Strong. Press the OK button.
DVD player, cable/satellite box and digital camera
4
Use the CURSOR ◄ and ► buttons to highlight
AUDIO. Press the OK button.
2
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE:
signals usually will not need noise reduction.
This item will be grayed out if you turn on the Light
sensor function.
•
MPEG NR OPERATION
Please set Light sensor operation to off then can turn on
this function.
Press the MENU button on the remote control to
display the Main menu.
•
1
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
LIGHT SENSOR OPERATION
2
Picture brightness will automatically be boosted or reduced
depending on the room brightness.
Use the CURSOR ▲ and ▼ buttons to select
MPEG NR. Press the OK button.
3
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ▲ and ▼ buttons to select Off,
Weak, Medium or Strong. Press the OK button.
4
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
DYNAMIC AI OPERATION
Use the CURSOR ▲ and ▼ buttons to select Light
Sensor. Press the OK button.
3
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ▲ and ▼ buttons to select Off
,Low ,Middle or High. Press the OK button.
4
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
NOTE:
Use the CURSOR ▲ and ▼ buttons to select the
Dynamic AI. Press the OK button.
3
The initial setting of Light sensor in the Home mode is
High.
•
•
Use the CURSOR ▲ and ▼ buttons to select Off,
Weak, Medium or Strong. Press the OK button.
4
Change this setting to Middle, Low or Off if a picture is
too dark in your home.
NOTE : Please set PICTURE MODE to User then can turn
on this function PAGE 19.
OSD DISPLAY TIME OPERATION
OSD Display Time
PICTURE (PIX) SHAPE OPERATION
Press the MENU button on the remote control to
display the Main menu.
1
Pix Shape- Divided into three categories. The options
during the Pix Shape mode change by the detection of
HD, SD or PC inputs.
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
HD: Full / WaterGlass / Zoom1 / Zoom2
SD: Standard / WaterGlass / Zoom1 / Full / Zoom2
PC: Normal / Full / Dot by Dot
Use the CURSOR ▲ and ▼ buttons to select the
OSD Display Time option. Press the OK button.
3
Use the CURSOR ◄ and ► buttons to choose
from 20 Seconds, 30 Seconds, 40 Seconds, 50
Seconds or 60 Seconds. Press the OK button.
4
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
NEXT PAGE OPERATION
NEXT PAGE - Jump to next page menu.
Use the CURSOR ▲ and ▼ buttons to select Pix
Shape. Press the OK button.
3
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ▲ and ▼ buttons to select
Standard, WaterGlass, Zoom1, Full or Zoom2.
Press the OK button.
4
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to select the
Next Page.
3
NOTE : The remote controls of HD cable and satellite
boxes also have similar zoom choices. Try having
the TV setting on FULL first, and adjust via the
cable/satellite box's remote control.
Press the OK button to jump to the next page.
4
120Hz CONDITION OPERATION
BACKLIGHT OPERATION
Press the MENU button on the remote control to
display the Main menu.
1
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to select the
Next Page. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select
Backlight. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select the
120Hz Condition option.
4
Use the CURSOR ◄ and ► buttons to select the
desired value between 0 to 50.
4
Use the CURSOR ◄ and ► buttons to adjust the
120Hz Condition setting to On or Off.
5
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES :
TIME OPERATION
When you select to PC source or USB mode, the120Hz
CONDITION default setting is set to Off.
•
Time Zone - Choose from six categories in different
location, U.S.A. of Eastern, Central, Mountain, Pacific,
Alaska, and Hawaii, for your choice of setting all displayed
time zone on all ON- Screen Menu.
When display happened double shadow or Outer Glow
,please turn off the 120Hz CONDITION.
•
RESET ADVANCED OPERATION
Press the MENU button on the remote control to
display the Main menu.
1
Reset Advanced- Reset the previous adjustment settings
under the ADVANCED mode to the factory default value.
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM. Press the OK button.
2
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
1
Use the CURSOR ▲ and ▼ buttons to highlight
Time. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to highlight
Reset Advanced. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to select
4
Use the CURSOR ▲ and ▼ buttons to select
Reset or Cancel. Press the OK button.
3
Eastern, Central, Mountain, Pacific, Alaska
or Hawaii. Press the OK button. A red hook will
appear in the squared and blank region.
NOTE : Press the MENU button to return to the previous
ADVANCED menu.
Current Year
PREVIOUS PAGE OPERATION
Press the MENU button on the remote control to
display the Main menu.
1
PREVIOUS PAGE - Return to previous page.
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM.
2
Use the CURSOR ◄ and ► buttons to highlight
ADVANCED. Press the OK button.
2
Use the CURSOR ▲ and ▼(Down buttons to
highlight Time. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select the
Previous Page.
3
Use the CURSOR ▲ and ▼ buttons to highlight
Current Year.
4
Press the OK button can return to previous page.
4
Use the CURSOR◄ and ► buttons to select year.
5
SYSTEM
Current Date
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM.
2
Use the CURSOR ▲ and ▼ buttons to highlight
Time. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to highlight
Current Date.
4
Use the CURSOR ◄ and ► buttons to select
month number. Press the OK button.
5
LANGUAGE OPERATION
Use the CURSOR ◄ and ► buttons to select
date number. Press the OK button.
6
Language- Choose from English, Français, and Español for
the on-screen display of menus and messages.
Press the MENU button on the remote control to
display the Main menu.
1
Current Time
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM. Press the OK button.
2
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM.
2
Use the CURSOR ▲ and ▼ buttons to highlight
Language option. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to highlight
Time. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select
4
English, Français or Español. Press the OK
button. A red hook will appear in the squared and
blank region.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the CURSOR ▲ and ▼ buttons to highlight
Current Time.
Use the CURSOR ▲ and ▼ buttons to highlight
Power Saving. Press the OK button.
4
5
6
3
4
5
Use the CURSOR ▲ and ▼ buttons to highlight
Sleep. Press the OK button.
Use the CURSOR◄ and ► buttons to select
hour.Press the OK button.
Use the CURSOR ▲ and ▼ buttons to select Off,
30 min, 60 min, 90 min, 120 min, 150 min or 180
min. Press the OK button. A red hook will appear
in the squared and blank region.
Use the CURSOR◄ and ► buttons to select
minutes.Press the OK button.
On Time Function- turn on Switch on Time function
Press the MENU button on the remote control to
display the Main menu.
1
No Signal Standby- Automatic power saving, when no TV
signal input display on your panel.
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM.
Press the MENU button on the remote control to
display the Main menu.
2
1
Use the CURSOR ▲ and ▼ buttons to highlight
Time. Press the OK button.
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM.
3
2
Use the CURSOR ▲ and ▼ buttons to highlight
Power Saving. Press the OK button.
Use the CURSOR ▲ and ▼ buttons to highlight
On Time Function.
3
4
Use the CURSOR ▲ and ▼ buttons to highlight
No Signal Standby. Press the OK button.
4
Use the CURSOR◄ and ► buttons to select On
or Off. Press the OK button.
5
Use the CURSOR ▲ and ▼ buttons to select On
or Off. Press the OK button.
5
Switch On Time - You can automatic turn on TV at
your setting time.
ANALOG CLOSED-CAPTION OPERATION
Press the MENU button on the remote control to
display the Main menu.
1
Analog CC- Choose from eight types of captions for Analog
TV signal for your choice of setting the desired caption type to
be displayed with Analog TV signal programs on your HDTV.
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM.
2
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ▲ and ▼ buttons to highlight
Time.Press the OK button.
3
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to highlight
Switch On Time.
4
Use the CURSOR ▲ and ▼ buttons to highlight
Analog CC. Press the OK button.
3
Use the CURSOR◄ and ► buttons to select
hour.Press the OK button.
5
Use the CURSOR ▲ and ▼ buttons to select CC1,
4
CC2, CC3, CC4, TT1, TT2, TT3 or TT4. Press the
OK button. A red hook will appear in the squared
and blank region.
Use the CURSOR◄ and ►> buttons to select
minutes. Press the OK button.
6
POWER SAVING OPERATION
DIGITAL CLOSED-CAPTION OPERATION
Press the MENU button on the remote control to
display the Main menu.
Digital CC- Choose from six types of captions for Digital TV
signal for your choice of setting the desired caption type to
be displayed with Digital TV signal programs on your HDTV.
1
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM.
2
Press the MENU button on the remote control to
display the Main menu.
1
Use the CURSOR ▲ and ▼ buttons to highlight
Power Saving. Press the OK button.
3
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM. Press the OK button.
2
Sleep- Choose from Off, 30 min, 60 min, 90 min,120 min,
150 min, and 180 min for your choice of setting the counting
down of time you desire the HDTV to be turned off by itself.
The default setting is Off.
Use the CURSOR ▲ and ▼ buttons to highlight
Digital CC. Press the OK button.
3
Use the CURSOR ▲ and ▼ buttons to select
4
Press the MENU button on the remote control to
display the Main menu.
CS1, CS2, CS3, CS4, CS5 or CS6. Press the OK
button. A red hook will appear in the squared and
blank region.
1
Use the CURSOR◄ and ► buttons to highlight
SYSTEM. Press the OK button.
2
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CC STYLE SETTING OPERATION
RESET SYSTEM OPERATION
CC Style Setting- Caption is a textual information
Reset System- Reset the previous adjustment settings
transmitted along with the picture and sound.
under the SYSTEM mode to the factory default value.
Turning captioning ON causes the HDTV to open
these captions (Digital or Analog) and superimpose
them on the screen (Local broadcasters decide
which caption signals to transmit). Digital Captions
can be changed by your choice of the CC Style
Setting as shown.
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM. Press the OK button.
1
Use the CURSOR ▲ and ▼ buttons to highlight
Reset System. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to select Reset
or Cancel. Press the OK button.
3
There are several Subcatalogs for each nine
categories under the CC Style Setting for your choice
of setting the desired caption style superimposed on
your HDTV screen.
DEFAULT OPERATION
Default- A function linked to the RESET button on the
remote control.
Allows you to reset the previous adjustment settings
of all ON-Screen Menu Operations to the default
value.
Category Title Subcatalog of the Category Title
CC Setting
CC Display / Muted=On / Off
Automatic / Analog CC / Digital CC
Default / Custom
CC Priority
NOTE: Be sure you wish to execute this function.
Digital CC Preset
Font Size
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM. Press the OK button.
1
Standard / Large / Small
Use the CURSOR ▲ and ▼ buttons to highlight
Default. Press the OK button.
White / Red / Green / Blue / Yellow /
Magenta / Cyan / Black
2
Font Color
Use the CURSOR ▲ and ▼ buttons to select Reset
or Cancel. Press the OK button.
3
Style1 / Style2 / Style3 / Style4 /
Style5 / Style6 / Style7
Font Style
None / Raised / Depressed / Outline
/ L.shadow / R.shadow
SYSTEM INFO OPERATION
Edge Type
System Info- Allows your checking the record of the
Firmware Code version and release Date kept in your
HDTV memory.
White / Red / Green / Blue / Yellow /
Magenta / Cyan / Black
Edge Color
Background Color
White / Red / Green / Blue / Yellow /
Magenta / Cyan / Black
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM. Press the OK button.
1
Use the CURSOR ▲ and ▼ buttons to highlight
System Info. Press the OK button.
2
Press the MENU button on the remote control to
display the Main menu.
1
Use the MENU button to return to SYSTEM menu
or use the EXIT button to close the ON-Screen
menu.
3
Use the CURSOR ◄ and ► buttons to highlight
SYSTEM. Press the OK button.
2
3
4
Use the CURSOR ▲ and ▼ buttons to highlight
CC Style Setting. Press the OK button.
Use the CURSOR ▲ and ▼ buttons to select CC
Setting, CC Priority, Digital CC, Present, Font
Size, Font Color, Font Style, Edge Type, Edge
Color or Background Color. Press the OK
button.
Use the CURSOR ◄ and ► buttons to select the
above-mentioned Subcatalog of the Category Title
you want to set. Press the OK button.
5
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:CURSOR ◄ ► ▲ ▼ buttons can scroll over the
USB PHOTO VIEWER
screen only in Zoom mode(x2,x4)
MEDIA BROWSER OPERATION
Press the INPUT button on the remote control
and use the CURSOR ▲ and ▼ buttons to highlight
USB. Press the OK button.
1
Use the EXIT button to exit this function.
5
MULTI VIEW (Thumbnail)
Use the CURSOR ▲ and ▼ buttons to highlight
Media Browser. Press the OK button.
2
Use the CURSOR ▲ and ▼ buttons to select
Thumbnail. Press the OK button.
1
Use the CURSOR ▲ and ▼ buttons to select JPEG
file or JPEG folder. Press the OK button.
3
SINGLE VIEW (Open)
Use the CURSOR ▲ and ▼ buttons to select Open.
Press the OK button.
1
Press the OK button then use the CURSOR
▲ ▼ buttons to select a JPEG file. Press the OK
button.
◄
2
►
Use the CURSOR ▲ and ▼ buttons to select JPEG
file. Press the OK button.
2
If the JPEG file more than 15 files. Use the CURSOR
◄ ►▲ ▼ buttons to select next page JPEG file.
3
4
Use the EXIT button to exit this function.
Use CURSOR ▲ and ▼ buttons can rotate he
image.
3
SLIDESHOW
Use the CURSOR ▲ and ▼ buttons to select
Slideshow. Press the OK button.
1
NOTE:CURSOR ▲ button can rotate view clockwise.
CURSOR ▼ button can rotate view
counterclockwise
Press OK button can zoom in x2 and press OK
4
button again can zoom in x4. Press EXIT button
can minify the image and press exit again can to
original size.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the EXIT button to exit this function.
2
SETTINGS (for Slideshow function) OPERATION
Use the CURSOR ▲ and ▼ buttons to highlight
Settings. Press the OK button.
1
Use the CURSOR ▲ and ▼ buttons to highlight
Slideshow Interval.
2
Use the CURSOR ◄ and ► buttons to select 3sec,
5sec or 10sec.
Use the CURSOR ▲ and ▼ buttons to highlight
Slideshow Effect.
3
Use the CURSOR ◄ and ► buttons to select
Off, Wipe Right, Wipe Down, Comb Side, Comb
UpDown, Checker, Mosaic, Fade, Blind Left, Blind
Down, Box In and Box Out.
Use the CURSOR ▲ and ▼ buttons to highlight
Slideshow Repeat.
4
Use the CURSOR ◄ and ► buttons to select On or
Off.
NOTES:
The operation bar of JPEG viewer (OSD) will disappear
within three seconds.
•
Press the INFO button to display the operation bar again.
Use the CURSOR ◄ and ► buttons to view Next or
•
•
Previous picture .
Use the INFO button to close OSD information
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PHOTO VIEWER SPECIFICATIONS
USB memory (Should be a flash memory type with USB mass storage.)
Playable media
Format
No support for USB HUB.
FAT16, FAT32
Maximum number of files 10000
Maximum number of
1000
folders
File path
Up to 260 characters
Directory/File name
8 characters
JPEG Base Line format (Supported) with English file name.
Progressive/JPEG 2000/Uncompressed (Not supported)
Image file format
Pixel size
8x8 to 16384x8640
x16
Zoom-in-limit
4069x2160 (Width x Height) or less: x 1/16
Zoom-out limit
Larger than 4096x2160 (Width x Height) and 8192x4320 (Width x Height) or less: x 1/32
Larger than 8192x4320 (Width x Height): x1/64
Symbol : ! - _ # $ % & ’ @ ^ `
Number: 0 1 2 3 4 5 6 7 8 9
Character code supported
in file system library
Alphabet: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
*No operation is guaranteed for use Symbol only as a directory name or file name.
NOTES:
Connectivity is not guaranteed for all devices.
•
•
•
•
•
•
Gently insert the USB device into the port and do no remove while viewing Media Player.
USB device: USB Mass Storage Class device ( MSC)
Connect the USB device to the TV directly.
Do not use a USB Hub.
You must obtain any required permission from copyright owners to use copyright content. SANYO cannot and does
not grant such permission.Imusam earume doluptaspid quiat que eos et hillignam abo. Ut quiassition reni beaqui ducit,
similicideri del et la sus siti cum utes que preptatem et doluptatibus dem reiumque endit evelent aut volupta turemol uptate
quossim illaccusdae vendandiorum rero dolorun tectat qui utatem nos rehentur aditiatquide sandissit estotas re volles et
min explita tatestenis ipsam que nobitas ut explic tem nuscipid min nis dest as molendebitae volum aperit, quo tores rae
volorectore eum ditatiore sunt il mil ipiderunt aut aliquaest, ulparchil ipiditi omnissi minvenis sum labore doloribus.
Tas alibeature et volut iliqui ab ipsunt utem que suntur?
•
•
Ta vel eos aut vent. Osti consequi ut as qui ut velliquae qui te et elitium exceaquas aut accusapelent qui ventio. Udi
idendebit omnistia volum consequam qui acid maio inis erem as eicid maiore volesequo conest, ne et dellupt atiassim
exped etustotat mod qui optatur?
Pa doluptibus. Ed que volestio dit et eiuribus alignis et exceris cuptas prerro exerum solorum qui num qui volupid eliquibus
minis earum voluptae. Liqui volor aut doluptat lis restotat.
•
•
Obis dis estem fugia iur arum este dolum volupti quuntorem voluptatia in expeles ecuscipsum harci duciuriorem fugita
voluptasi sitati doloreh enturib ustiustius si consequi vit, corenim porest, sitas reria se doles que enis assequaectem
sin porro in est pos suntium ut aut aut dis utat ped etus aut aut vent alit verenih itateni dolor molorest pro vel illupta
adicitiuntem laut lautemo luptati onsequi sciist aut modit alit doluptaspici ommodit min cumquam quis unt.
Est que odis diciduciis autas voluptiberum quam volendantis sin consequ oditae venihic atempos estrum facesto con
rempos quisquas eos errovidi beat explici maximoles noneculliant omnis volupta quiaspe rsperro ium rernatibus eum
dolupta turiaes est aliberu ptatur? Debis maximo is et od ulparcient quasin perrum fugia de vollecepe veror simin consequi
quo corendiorum, il in cone es autate volupti ratiorerum et maximillorro mollor restota ecust, ipsus elibus aut enim sa
doluptam que nihilique pariam dolene alis aciis sit, velestis eatquia comnit pres modipsam quistibus quiatempos aut
pliquisi bero volupta sequi ut este pa sent.
•
•
Ota dunt voluptibus modipsandam, ut untiorat odiam doloratas quamusdae nimi, seque niae sam estiassum et volum
que di qui dolorectotat ad qui blab idebisit laboreped modipsam est occum ex eum natqui quat faces evel modit minienis
simustrunto te omnimin vellaceaque qui odi ipid magni doluptas as quia doluptae. Et quiati consed et ditianimus
endendamus asi que pe lam il everovitio esciis as sectate enis eaquo iliasperum esectatur aut autem at fugitaqui corehent
27
Download from Www.Somanuals.com. All Manuals Search And Download.
HELPFUL HINTS - Problems / Solutions
If you are having problems with your HDTV, check this
trouble shooting chart to find one or more possible
solutions.
Before returning your HDTV, please visit our website
at http://www.sanyoctv.com or call us toll free at 1-800-
877-5032 We can Help!
Problem:
Check these Conditions:
Try these Solutions:
Page No.
Check the antenna / external
connections.
Adjust antenna.
•
•
•
•
•
•
Try a different channel.
There may be a station trouble, no
signal broadcast.
7, 11,
15 - 16
No picture, sound
(Digital Picture)
Execute Channel Scan in the
CHANNEL menu. (Set Signal Type
to All)
MUTE function may be turned ON.
Adjust Volume.
•
•
Check if station is broadcasting a
Closed - Caption signal.
Press the CAPTION button to
select captioning mode.
•
•
No Caption
9, 23
9, 21
Select another channel.
Cannot display picture
on a full screen
Press the PIX SHAPE button on the
remote control to change settings.
•
Check if the program is in color.
Try a different channel.
Adjust the antenna.
•
•
•
•
•
Check the antenna / external
connections.
7,9
19 - 20
Poor Picture/ Sound
(watching Analog)
Execute Reset Picture in the
PICTURE menu.
Color or Tint may be misadjusted.
There may be a station trouble.
MUTE function may be turned ON.
•
•
•
Adjust the Volume and/or Image.
•
•
Check the Audio / Video
connections.
Press the INPUT button on the
remote control.
•
•
•
Check the external equipment
connections.
“No Signal” message
appears on screen
7 - 13
7, 11
Check the external equipment
settings.
Check the antenna connection.
•
•
Press the INFO button and check
signal strength.
Turn antenna, install signal booster.
Install outdoor Digital antenna.
Pixilation of Digital
image
•
•
Channel may be removed from
memory.
Selec Channel List to add
channels or start channel scan in
CHANNEL mode.
•
•
Check antenna connections.
7, 11,
15 - 18
Cannot select or scan
some channels
•
•
Turn antenna, install signal booster.
•
No digital signal being
broadcasted.
Weak Signal.
•
•
Check CHANNEL menu, Signal
Source item should set to Cable.
Set Signal Source to Cable, Set
Signal Type to All and execute
Channel Scan to search for Cable
channels in CHANNEL menu.
•
No Cable channels
above number 13
11, 15
7, 9
Check batteries.
Replace batteries.
Remote Control will
not operate TV
•
•
•
•
Check if the TV is Plugged in.
Aim remote control at front of TV.
This is a normal condition during
warm - up and cool down of the
plastic cabinet parts.
•
Cabinet makes
popping sound
Check the external equipment
connections.
Press the INPUT button on the
remote control.
•
•
•
No USB Media
message appears on
screen
Check the external equipment
settings.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Maximum Visible Range
(H)1209.6 x (V)680.4 mm (54.6" class /138.8 diagonal)
Refresh Rate
120 Hz
Picture Resolution
Full HD 1920X1080
Viewing Angle
Horizontal 178° & Vertical: 178° (Panel tentative)
Brightness
450(Typical) cd/m2 (Panel tentative)
Contrast Ratio
5000:1 (Typical) (Panel tentative)
Voltage
120V AC 60Hz
AC Power Consumption (average)
342 Watts
Color System
NTSC3.58
Sound System
M
Channel Coverage
Low band: 54.00 to 144.00MHz Mid band: 145.00 to 424.00MHz High band: 425.00 to 861.25MHz
Sound Output
10W+10W
Dimensions
(Including Stand)
(W)1328 x (H)926 x (D)378 mm
Net Weight
(Including Stand)
31.3 kg
Operating Environment
Operating Temperature: 5°C to 35°C
Operating Humidity: 0 % to 90 %
Storage Temperature: 0°C to 40°C
Storage Humidity: 0% to 90% (non-condensing)
■
Specifications are subject to change without notice.
■
The On-Screen Menu and figures in this manual may differ slightly from the product.
Input terminals
PC
Video 1
Video 2/3
HDMI/DVI
ANT
USB
VGA
AUDIO JACK
AV
AV Audio
YPbPr
YPbPr Audio
1
1
3
1
1
1
2
2
1
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Output terminals
Digital Audio Output
Audio Output
1
1
CONFIGURATIONS OF VGA TERMINALS
VGA IN (D-SUB) TERMINAL
Terminal : D-SUB15 PIN
Connect video output terminal of LCD TV to this terminal with a VGA Cable (not supplied). When connecting
Macintosh computer, the MAC Adapter (not supplied) is required.
1
2
3
4
5
6
7
8
Red Input
Green Input
Blue Input
Reserved
Reserved
GND
9
+5V
10
11
12
13
14
15
NC
Sense 0
DDC_SDA
Horiz. sync.
Vert. sync.
DDC_SCL
GND
GND
PC / HDMI SIGNAL MODES
This LCD TV can correspond to the signals below. After connecting with the computer, the TV can automatically
recognize the signal from the connected PC (computer) / HDMI.
PC SIGNAL MODE COLUMN (recommended)®
SYSTEM MODE
VGA
Resolution
640x480
V-Freq.(Hz)
H-Freq.(KHz)
31.47
PIXELS CLOCK (MHz)
59.94
60
25.18
40
SVGA
800x600
37.88
XGA
1024x768
1360x768
1280x768
1280x1024
60
48.36
65
WXGA
WXGA
SXGA
60
47.712
47.78
85.5
79.5
108
60
60
63.981
NOTE:
■
In principle, the TV can not display signal modes not described in the above column. However, it can sometimes
display a signal very similar with one of the modes described.
■
■
■
It is not the trouble of the TV if interference appears on the picture while switching the signal mode.
The Dot Clock of the computer’s signal must be less than 108 MHz.
When the input signal from PC is out of the PC signal mode column, above, “No Support” caution message will
display. But in some case, the LCD TV will still display the PC signal though the signal mode doesn’t exist on the
list above. Under this condition, the display position may not correct and the quality may not be admitted also.
When input signal is digital from HDMI terminal, refer to the chart below.
SYSTEM MODE
480I
Resolution
720(1440)x480
720x480
V-Freq.(Hz)
59.94
59.94
60
H-Freq.(KHz)
15.73
31.47
45
PIXELS CLOCK (MHz)
27
480P
27
720P/60
1080I/60
1080P/24
1080P/60
1280x720
74.25
74.25
74.25
148.5
1920x1080
1920x1080
1920x1080
60
33.75
27
24
60
67.5
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|