WASHING MACHINE
INSTRUCTION MANUAL
Model numbers:
RH1247B, RH1247S & RH1247W
Please read these instructions carefully and
keep them for future reference
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-1: BEFORE USING
SAFETY WARNINGS
Do not use multiple receptacles or extension cord.
Do not plug in damaged or torn plugs.
In case of a breakdown of power cable, contact the nearest
authorized service for replacing it.
Never pull the cable when unplugging. Grab the plug when
unplugging.
Do not plug-in or pull-out the plug from the receptacle with wet
hands to prevent electric shock.
Never touch the machine with your wet or damp hand or foot.
Never open the detergent compartment when the appliance is
running.
Never force the door to open when the washing machine is
running.
Do not touch discharging hose and water during discharging as the
appliance may reach high temperatures when running.
In case of any breakdown, unplug the appliance first and then turn
the water faucet off. Do not attempt to repair by yourself, instead
consult authorized service.
Remember that packaging materials of your machine may be
dangerous for children. Keep the packaging materials in a place
where children cannot reach or dispose of them as to wasting
instructions.
Do not allow your children to play with the washing machine as it is
an electrically-driven appliance.
Keep your pets away from your machine.
Your machine should only be used by adults in line with the
information provided in this user‟s manual.
Your machine is designed to be used domestically. Commercial
use will cause your warranty to be cancelled.
Anyone‟s intervention to your machine except authorized services
in anyway will cause your warranty to be invalid.
Ideal operating temperature of your machine is 15-25˚C.
Do not deploy your machine on carpet and suchlike grounds that
shall block ventilation of the base.
Do not keep inflammable liquids near your machine.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-1: BEFORE USING
You should absolutely remove the transport screws of your
machine before the first usage. Faults occurring in machines
operated with transport screw fitted shall not be covered by the
warranty.
Do not put the discharging hose of your machine in a vessel,
bucket or sink.
Your machine is out of warranty against faults caused by any kind
of external factors (spate, pesticides, fire, etc.).
The appliance is not intended for use by people (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge unless they have been given
supervision or instruction concerning use of the appliance by a
preson responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
RECOMMENDATIONS
Before beginning to use your washing machine, ask for free-of-
charge help about installing, commissioning and using your
washing machine by calling the nearest authorized service.
It is recommended to perform the first washing operation in
95˚ White Cotton programme and without laundry by inserting
½ scale of detergent into the 2nd compartment of the detergent
drawer.
As detergent or softener exposed to air for a long time may cause
residues, put your detergent or softener in the detergent drawer in
the beginning of each washing.
It is recommended that you wash only extremely dirty laundry in
prewashing programme.
The amount of laundry you put in your washing machine shall not
exceed the maximum amount indicated.
If your machine is not going to be used for a long time you should
unplug the appliance, turn off the water inlet faucet and leave the
door slightly open. This is so that the inside of your machine will
remain dry and will not cause an unpleasant smell of damp.
Some water may be left in your machine due to experiments and
tests carried out during production. This will not damage your
machine.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-2: INSTALLATION
2
3
4
1.Detergent drawer
2.Upper tray
3.Programme knob
4.Electronic display
5.Door
1
6.Cover of pump filter
5
6
8
9
10
7
7
7
7.Transport safety
screw
8.Power cable
9.Discharging hose
10.Water inlet valve
7
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-2: INSTALLATION
REMOVING TRANSPORT SAFETY SCREWS
Transportation screws,which are located at the back of the machine,
must be removed before using or running the machine.
Loosen the screws by rotating counterclockwise with a suitable
wrench.
Pull out the screws together with the coloured plastic spacer, (the
screws that have been removed from the machine should be kept for
any other transportation necessities).
To seal the holes insert the supplied plastic caps
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-2: INSTALLATION
ADJUSTIMENT OF FEET
Do not install your machine on a carpet or suchlike grounds.
For your machine to work silently and without any vibration, it
should it be settled on a flat, non-slippery and tough ground.
Loosen the plastic adjustment nut.
Adjust the stays upward and downward by rotating them.
When the correct balance has been achieved, tighten the plastic
adjustment nut again by rotating it upwards.
Never put cardboard, wood or suchlike materials under your
machine to try and stabilize the distortions of the ground.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-2: INSTALLATION
ELECTRICAL CONNECTION / WATER INLET CONNECTION
Electrical connection
Your washing machine is set to 220-240V and 50Hz.
Mains cord of your washing machine is equipped with a specific
grounded plug. This plug should always be inserted to a grounded
receptacle of 10 amps. Fuse current value of the power line
connected to this plug should also be 10 amps. If you don‟t have
such a receptacle and fuse confirming with this, please have it
done by a qualified electrician.
We do not take responsibility for the damages that occur due
to ungrounded usage.
Operating your machine under low voltage will cause the life cycle
of your machine to be reduced and its performance to be
restricted.
Water inlet connection
Your machine has a single water (cold) inlet.
To prevent leakages on the connection joints, 1 seal is included in
the hose packing, (Fit this seal on the end of the water inlet hose at
the tap side.)
Connect the bracketed end of the water inlet hose to the water inlet
valve at the rear of the machine and the other end to your tap. In
situations where you are not sure, let a qualified plumber perform
the connection process.
Water pressure of 0,1-1 MPa from your tap will enable your
machine to work more efficiently, (0,1 MPa pressure means water
flow of more than 8 litres in 1 minute from a fully opened tap).
After all connections are completed, check for leakages around the
connection joints by turning on your tap completely and seeing if
any water escapes.
Be sure that water inlet hoses are not folded, broken or crushed.
Mount the water inlet hoses to a 3”/4 geared water tap.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-2: INSTALLATION
WATER INLET CONNECTION / WATER DİSCHARGE
CONNECTION
Water discharge connection
Be sure that the water inlet hoses are not folded, twisted, crushed
or elongated by stretching.
Water drain hose should be mounted at a height of minimum 60
cm, maximum 100 cm from the ground.
The end of the water drain hose may be fitted directly to the dirty
water outlet hole or a special apparatus mounted on the outlet
bracket of the wash-stand.
Never attempt to extend the water drain hose by adding extra
parts.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-3: TECHNICAL SPECIFICATIONS
Operating voltage / frequency
(V/Hz)
(220-240) V ~/50Hz
10
Total current (A)
Maximum: 1 Mpa
Minimum: 0.1 MPa
Water pressure (Mpa)
Total power (W)
2100
Maximum dry laundry capacity
(kg)
6
1200
15
Wringing revolution (rev / min)
Programme number
Dimensions
845 x 597 x 527
(Height x Width x Depth) (mm)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-4: LAUNDRY PREPARATION
Separate your clothes according to their types (cotton, synthetic,
sensitive, woolen, etc), washing temperatures, dirtiness and
colour.
Never wash your white and coloured clothes together.
Since your new coloured clothes may shed dye on the first wash,
wash them separately.
Be careful that no metal pieces are found on or in the pockets of
your clothes - remove if anyhting is found.
Zip and button up your clothes.
Remove the plastic or metal hooks and laces of curtains or place
them inside a washing bag and tie.
WARNING: Faults that emerge due to the penetration of foreign
objects into your machine are not included within the warranty.
Reverse textiles such as pants, knitwear, t-shirt and sweat suit.
Wash socks, handkerchief and suchlike small laundry items in a
washing net.
Maximum
washing
eras
90°
Maximum
washing
eratu
60°C
Normal washing
Maximum
washing
eratu
30 °C
Hand washing
No washing
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-4: LAUNDRY PREPARATION
Ironing
temperature is
maximum 110°C
No whitening
Whitening
available
Ironing
Ironing
temperature is
maximum 150°C
temperature is
maximum 200°C
No ironing
No dry cleaning
Dry by hanging
Dry cleaning
available
Leave on a flat
place
Drying by twirling
is not allowed
Hang when wet
Dry cleaning in
gas oil, pure
alcohol and R113
is allowed
Perchloroethylen Perchlorinetyhlene
e R11, R113,
Petroleum
R11, R113, Gas
oil
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-4: LAUNDRY PREPARATION
Open the door of your machine.
Place your laundry in your machine.
Note: Maximum loading capacity may vary based on the
laundry type you wash, degree of contamination and the
programme you have chosen. Do not exceed maximum dry
loading capacity indicated in the programme table for
washing programmes.
You can take the following table of weights as an example.
LAUNDRY TYPE
WEIGHT (gr)
200
Towel
Linen
500
Bathrobe
1200
700
200
100
250
Quilt cover
Pillow slip
Underwear
Tablecloth
Put the laundry in separately.
Ensure that no laundry is caught between the cover and bellow
seal when closing the door of your machine.
Push the door of your machine until you hear the locking sound –
this indicates the door is fully closed.
Close the door of your machine properly; otherwise your machine
will not start the washing operation.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION-4: LAUNDRY PREPARATION
The amount of detergent you will put in your machine will depend on
the following criteria:
Your detergent utilization will be based on the amount of dirt or the
level of stains on your laundry. Do not prewash your less stained
laundry items and only put a slight amount of detergent in the 2nd
compartment of the detergent drawer.
For very dirty and stained laundry items, select a programme
including prewashing, and put ¼ of the normal amount of detergent
in the 1st compartment of the detergent drawer then put the
remaining ¾ of it into the 2nd compartment.
Use detergents produced for automatic washing machines in your
machine. The amount of detergent you should use for your laundry
is printed on the detergent package.
The higher the degree of hardness of the water the more detergent
you will use.
The amount of the detergent you will use will increase as the
amount of your laundry increases.
Put the softener in the softener compartment in the detergent
drawer. Do not exceed the MAX level. Otherwise, softener will flow
into the washing water when flushing through.
Softeners with a high density should be thinned to a degree before
being put in the drawer. This is because high-density softener will
clog the flush and avoid the flow of the softener.
You can use your liquid detergents in all programs without
prewashing. For this, fit liquid detergent level plate in the
accessories bag into 2nd compartment of the detergent drawer and
set the amount of liquid detergent according to the levels on this
plate. Remember to detach the liquid detergent plate.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: CONTROL PANEL
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: CONTROL PANEL
DETERGENT DRAWER
E
D
B
A
C
A. Prewashing compartment
B. Main washing compartment
C. Softener compartment
D. Siphon cover
E. Liquid level detergent plate
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: CONTROL PANEL
PROGRAMME KNOB
You may select the programme you like would like/require to
wash your laundry by rotating the programme knob in either
direction (clockwise or anti-clockwise). Ensure that the
programme knob is exactly on the programme you want to
select.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: CONTROL PANEL
ELECTRONIC DISPLAY
1. Adjusting button for spin speed
2. Adjusting button for temperature of the washing water
3. Auxiliary Prewash function
4. Auxiliary Rapid wash function
5. Auxiliary Easy iron function
6. Auxiliary Delay timer function
7. Start/Pause button
8. Electronic display
On the electronic display, you can view the washing water
temperature, spin speed of your machine, the amount of time your
machine will continue washing, the auxiliary functions you have
selected and whether the door of your machine is locked or not.
Furthermore, the electronic display will warn you by means of fault
symbols on the display when a fault occurs on your machine and notify
you of the completion of the washing programme by displaying the text
“END” on the display as soon as the washing programme you have
selected has finished.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
Plug your machine in.
Open the water faucet.
Open the machine door.
Place your laundry in your machine.
Push the door of your machine until hearing the locking sound to
close it.
Select the program you require.
Put detergent and softener in the detergent drawer.
First washing operation
Some water may be left in your machine due to experiments and tests
carried out during production. To dispose of this water, it is
recommended to perform the first washing operation in 1st programme
and without laundry by inserting ½ scale of detergent in 2nd
compartment of the detergent drawer.
Selecting programme
Select the convenient programme for your laundry on the programme
table.
Auxiliary Functions
Before starting the programme, you can select an auxiliary function if
you so wish.
Press on the button of the auxiliary function you wish to select.
If the auxiliary function symbol on the electronic display flashes
continuously, the auxiliary function you have selected will be
activated.
If auxiliary function symbol on electronic display blinks, the
auxiliary function you have selected will not be activated.
Reason for non-activation:
-The auxiliary function you want to use in the washing programme you
have selected is not applicable.
-Your machine has passed the stage during which the auxiliary
function you wanted to select could be implemented.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
Half-load detection system
Your machine features a half-load detection system. If you only put
laundry into the machine that is approximately half or less than half of
the maximum laundry capacity stated for your machine , your machine
will run so as to save washing time, water consumption and energy in
some programmes (Cotton 95°, Cotton 60°, Cotton 40°). When half-
load function is active, the machine can complete the programme you
have set in a shorter time.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
PROGRAM TABLE
MAXIMUM
AMOUNT OF
DRY
PROGRAMME &
PROGRAMME
TEMPERATURE (°C)
PROGRAMME
DURATION
(MIN.)
DETERGENT
COMPARTMENT
LAUNDRY TYPE
LAUNDRY (kg)
Very dirty cotton and flax textiles. (Underwear, linen, tablecloth(s), towel(s)
(maximum 4 kg), bedclothes, etc.
Normal dirty cotton and flax textiles. (Underwear, linen, tablecloth(s), towel(s)
(maximum 4 kg), bedclothes, etc.
Normal dirty colour and flax textiles.
Very dirty synthetic or synthetic-mixed textiles. (Nylon socks, shirts, blouses,
synthetic-including trousers etc.)
COTTON 95°
95
60
2
6
COTTON 60°
2
2
2
6
6
3
COTTON 40°
40
60
SYNTHETICS 60°
30
40
2
2
-
2
2
6
6
2
Less dirty silk-mixed laundries with machine wash labels
DELICATES 30°
WOOL 40°
Woollen laundries with machine wash labels (PLEASE CHECK EACH INDIVIDUAL
CLOTHE ITEM’S LABEL – ADJUST TEMPERATURE IF NECESSARY).
If you want to additionally rinse your laundry after a program has finished, you can
use this programme for any kind of laundries.
If you want to additionally wring your laundry after a program has finished, you can
use this programme for any kind of laundries.
Sensitive and woollen laundries with non-machine wash labels, that are
recommended to be washed by hand.
Sportswear items which are mainly made of special fibers, (in particular a synthetic
kind), that the washing label recommends that they should be washed sensitively
under a low temperature. In that way, the speciality of sportswear textile, badges,
wording, etc should be protect during the washing process.
RINSE
SPIN
-
HAND WASH 30°
30
30
2
SPORTS WEAR LIGHT 30°
2
3
Suitable for mixed items of laundry made of cotton and easy-care fabrics sensitive
to heat. The program temperature and mechanical agitation is designed to be
appropirate to both normal dirty cotton, flax and synthetic based laundry.
You can use this program to wash shirts made from cotton, synthetic and synthetic
blended fabrics which need to be washed on a lower temperature than synthetics,
and gentler than cottons.
30
60
MIX COOL 30°
2
2
3
3
SHIRTS/BLOUSES 60°
Baby clothes are delicate and baby skin is really reflective to detergent, this
program has an extra rinse with heating which purifies laundry from detergent.
Although program has heating step in the main wash, it also applies heating
during rinses and it helps to get rid of stains, odors and some microorganisms.
You can wash your dirty cotton, colour and flax textiles at 60°C in 60 minutes
You can wash your dirty cotton, colour and flax textiles in 15 minutes.
Note: As the washing period is short, a less amount of detergent is required
to be used compared to other programmes. The programme period will
increase if your machine detects instable loading.
50
60
30
BABY WEAR 50°
DAILY 60° 60‟
2
2
2
3
3
2
SUPER RAPID 30° 15„
Note: You can open the door of your machine 2 minutes after the completion of washing operation. (The duration of 2 minutes required to open the door of your
machine is not included in the washing period).
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
1. Spin speed selection and auxiliary function of soaking
You can set the spin speed for your laundry via the spin speed setting
button.
When you select a new
programme, the maximum spin
speed of the programme you have
selected will be shown on the
electronic display.
You can gradually reduce the spin
speed by pressing the spin speed
setting button. The spin function
of the program can be cancelled
by pressing the spin speed button
until (--) spin symbols are shown
on the electronic display.
If you have missed the spin speed you wanted, you can return to the
intended spin speed by continuously pressing the spin setting button.
If you have not unloaded your laundry upon completion of the
programme and you don‟t want them to crease in your machine, you
can use the auxiliary soaking function.
In programmes where the soaking
auxiliary function is applicable, it
may be activated by pressing the
spin speed setting button one
more time after the cancel (--)
spin symbol is shown on the
electronic display. You know that
the soaking function is activated
when the symbol
electronic display.
flashes on
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
If this function is selected, your laundry will be soaked in the last
rinsing water. When your machine soaks your laundries in the last
rinsing water, symbol
will blink on electronic display.
If you want to take your laundry out, press the “Start / Pause” button
on. Your machine will empty the water in it and finish the programme
without spinning.
If you would like to spin your laundry:
a) You can select the spin speed by using the spin speed setting
button when your machine is soaking your laundry in the latest
rinsing water. If you want to take your laundry out, press on
“Start / Pause” button. Your machine will empty the water in it
and finish the programme after wringing your laundry through
the spin speed you have selected.
b) Switch the programme knob to 0, select the spin programme on
the programme knob. You can choose to reduce the spin
speed by pressing the spin speed setting button. You can start
your machine by pressing on Start/Pause button. Your machine
will finish the programme after spinning your laundry in the spin
revolution you have selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
2. Washing water temperature selection
You can select the washing water temperature with the washing water
temperature adjustment button.
Whenever you select a new
programme, the maximum
washing water temperature is
shown on the electronic display.
You can gradually decrease the
washing water temperature
between the maximum
temperature and cold washing (--)
by pressing washing water
temperature adjustment button.
If you have missed the washing water temperature you wanted, you
can return to the intended temperature by continuously pressing the
washing water temperature adjustment button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
3. Auxiliary function prewash
You can give your very dirty
laundry a prewash prior to the
main wash by using this auxiliary
function. When using this function,
you should put detergent in the
front washing compartment of the
detergent drawer.
4. Auxiliary function for rapid wash
This auxiliary function will enable
the washing duration of your less
dirty laundry to be shortened. If
you put laundry in that only makes
up half or less than half of the
laundry capacity of the washing
programme you have selected in
your machine, your machine will
automatically detect this due to
the „Half-load‟ detection
system, and the programme you have selected will wash your laundry
in a shorter time to consume less energy and water. If your machine
detects a half load, the symbol
will automatically flash on the
electronic display. To cancel it, press the rapid wash auxiliary function
button once. However, the selection of the rapid wash auxiliary
function of quick washing will not possible if you have selected the
main rapid wash programme with the programme knob.
5. Auxiliary function for easy ironing
Your laundry will be less creased
if the easy ironing auxiliary
function is pressed/selected.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
6. Auxiliary function for delay timer
By using this auxiliary function,
you can delay the start of your
washing programme by 30
minutes and up to 23 hours.
To use the delay timer auxiliary function:
- Press time delay button once.
- “0.5h” will appear on the display.
- Press the time delay button until the time of which you want the
washing programme to be delayed by is shown on the electronic
display.
- To activate the time delay of the programme you have selected, you
should press the “Start/Pause” button and the time delay will start to
count down.
The time Intervals of the delay timer is 30 minutes for the first 2 hours,
thereafter it is 1 hour for 3 hours to 23 hours.
If you have missed the time delay you wanted, you can go back to the
time desired by continuously pressing the delay timer button.
If you want to cancel the delay timer, you need to press and hold the
delay timer button for 2 – 4 seconds.
To run the delay timer function, your machine needs to be operated by
pressing on Start/Pause button. As soon as you start your machine,
the count down process will start on the electronic display based on
the delay period you have selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
7. Anti-Allergic auxiliary function
In the programmes where this
auxiliary function is active, your
machine will perform an extra
rinsing operation on your laundry
prior to the last rinsing operation.
Note: Anti-Allergic auxiliary function is selected
automatically only in Baby wear programme.
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
STARTING THE PROGRAMME
Start/Pause button
By pressing on Start/Pause
button, you may start the
programme you have selected,
suspend a running programme. If
you switch your machine to pause
mode, electronic display will blink.
When you start your machine, the following symbols for the
programmes you have selected will be available on the electronic
display.
- Temperature of washing water
- Spin speed
- Symbols of auxiliary functions (if you have selected)
- Programme ending time or programme delay time based on your
selection
- Open or locked door symbol
Note: Symbol for open door flashing on electronic display will go off
and symbol for locked door will flash approximately 1 minute after you
start your machine by pressing the Start/pause button.
Open door
Locked door
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
ADDING/REMOVING LAUNDRY
Adding/Removing laundry from the machine
If you want to add or remove laundry when your machine is running:
- Switch your machine to the pause mode by pressing on Start/Pause
button.
- After a while, the symbol
will be shown on the electronic diplay
and this means that the door of your machine can now be opened.
- When you see the symbol
on the electronic display, you can
either add or remove laundry after opening the machine door.
Note: If symbol
blinks on the electronic display, it means that you
cannot add or remove laundry as your machine has passed the steps
in question.
- When you have added or removed the laundry, close the door of
your machine and press on Start/Pause button.
- Your machine will continue to wash after locking the door of your
machine.
- The symbol
will flash on the electronic display.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
CHILD LOCK
Child lock
To avoid programme flow from being affected if programme knobs are
pressed or programme knob is turned when performing washing
operation in your machine, a child lock is available. The Child lock will
be activated when both the rapid wash and easy ironing auxiliary
functions are pressed at the same time for 3 seconds or longer.
The symbol
will flash on the electronic display when activated.
If any button is pressed while child lock is active, the symbol
blink on the electronic display.
will
When any of the programmes are running and the child lock is active,
if another programme is selected after programme knob is switched to
the Stop position, the programme already running will continue.
To deactivate the Child Lock, both the rapid wash and easy ironing
auxiliary functions should be pressed at the same time for 3 seconds
or longer. When Child Lock is deactivated, symbol
electronic display will go off.
on the
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
CANCELLING PROGRAMME
Cancelling programme
If you want to cancel any programme running:
- Switch the programme knob to Stop.
- Your machine will stop the washing operation and the programme will
be cancelled.
- To get rid of the water accumulated in the machine switch the
programme knob to any programme.
- Your machine will perform the necessary discharge operation and
cancel the programme.
- You can run your machine by selecting a new programme.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATING YOUR MACHINE
FINISHING PROGRAMME
Finishing programme
- Your machine will stop by itself as soon as the programme you have
selected finishes.
-The text “END” will flash on the electronic display.
Note: Within 2 minutes of the programme finishing, your machine will
remove the “End” text from the electronic display to save energy. It
will re-flash when any of the auxiliary function buttons are pressed.
- If you see that the symbol
indicating that the door can be opened
flashes on the electronic display, you can open the door of your
machine and remove the laundry.
- Leave the door of your machine open to allow the inner part of your
machine to dry after removing your laundry.
- Switch the programme knob to Stop.
- Unplug your machine.
- Turn the water faucet off.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7: ELECTRONIC DISPLAY WARNING SYMBOLS
WARNING OF WATER CUT-OFF / LOW MAINS WATER
PRESSURE
If the symbol
flashes on the electronic display:
- Water faucet may be closed. Check.
- Mains water may be cut-off. Check. If so, switch the programme knob
to position 0. You can select a programme and run your machine after
the mains water is supplied.
- Mains water pressure may be low. Check.
- Water inlet hose may be twisted. Check.
- Water inlet hose may be clogged. Clean water inlet hose filters. (*)
- Valve inlet filter may be clogged. Clean the valve inlet filters. (*)
(*) See the chapter regarding maintenance and cleaning of your
machine.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7: ELECTRONIC DISPLAY WARNING SYMBOLS
WARNING OF CLOGGED PUMP FILTER
If the symbol
flashes on the electronic display:
- Pump filter may be clogged. Clean the pump filter. (*)
- Discharging hose may be clogged or twisted. Check the discharging
hose.
(*) See the chapter regarding maintenance and cleaning of your
machine.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 8: MAINTENANCE AND CLEANING OF YOUR
MACHINE
Unplug your machine.
Turn the water faucet off.
WATER INLET FILTERS
Filters to avoid dirt and foreign substances in the water from
penetrating into the machine are available both on the side of faucet
and on the ends of water valves along the water inlet hose of your
machine. If your machine cannot intake sufficient amount of water
despite water faucet being open, these filters should be cleaned.
Detach the water inlet hoses.
Remove the filters on water inlet valves using pliers and then clean
it with a brush in water.
Disassemble the filters on the side of faucet side of water inlet
hoses manually and clean it.
Having the filters cleaned, you can fit them in the same way
reversely.
CAUTION: Filters of water inlet valves may be clogged due to
contaminated water faucet or lack of necessary maintenance or
valves may be broken down, causing water leaking into your machine
continuously. Breakdowns that may arise because of these
reasons are out of scope of warranty.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 8: MAINTENANCE AND CLEANING OF YOUR
MACHINE / PUMP FILTER
A filter system is available which avoids threads from your laundry and
tiny materials from entering into the pump during the water discharging
operation carried out by your machine after completing washing. This
prolongs the lifecycle of your pump. It is recommended that you clean
your pump filter once in 2 months. To clean pump filter:
Depress the lug downwardly to uncover the pump section of the
toe board and pull it towards yourself and extract it.
Before opening the filter cover, settle a vessel in front of the filter
cover to prevent the water remaining in the machine from flowing
onto the ground.
Loosen the filter cover in counter-clockwise and then empty water.
Clean the foreign materials in the filter.
Check whether the pump rotates with your hands.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 8: MAINTENANCE AND CLEANING OF YOUR
MACHINE / PUMP FILTER
After cleaning the filter, fit the filter cover by rotating it clockwise.
Fit the pump section of the toe board.
Remember that water will leak if you do not fit the filter cover
properly.
You can use the pump section of the toe board for discharging a
slight amount of water remaining in the pump of your machine.
WARNING!
As water in the pump may be hot, wait until it cools down.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 8: MAINTENANCE AND CLEANING OF YOUR
MACHINE / DETERGENT DRAWER
Your detergents may deposit residue in detergent drawer over time. To
clean the residue formed, disassemble the detergent drawer regurlarly.
To eject the detergent drawer:
Pull the detergent drawer out fully.
Keep on pulling by depressing on the flush cover in the detergent
drawer already being pulled up to the end and then unsettle the
detergent drawer.
Flush it using a brush.
Collect residues in the housing of the detergent drawer without
dropping them inside the machine.
To assemble the detergent drawer after drying it using a towel or
dry cloth, resettle the detergent drawer by depressing on the flush
cover and fit it by pushing forward.
Do not wash your detergent drawer in a dishwasher.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 8: MAINTENANCE AND CLEANING OF YOUR
MACHINE / SIPHON PLUG / BODY / DRUM
Siphon plug
Disassemble the detergent drawer. Disassemble the flush stopper and
clean the softener residues completely. Refit the flush stopper after
cleaning it. Check whether it has settled properly.
Body
Clean the outer body of your machine with warm water and a non-
inflammable cleaning agent that will not abrade the body of your
machine. After rinsing with some water, dry it using a soft and dry
cloth.
Drum
Do not leave metallic objects such as needles, paper clips, coins, etc.
in your machine. These objects will lead to formation of rust stains in
the drum. To clean such rust stains, use a non-chlorine cleaning agent
and follow the instructions of the manufacturers of the cleaning agent.
Never use wire wool or similar hard objects for cleaning rust stains.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 9: PRACTICAL INFORMATION
Alcoholic drinks: Spotted area should initially be washed
using cold water, and then be wiped with glycerine and
water and rinsed with vinegar-mixed water.
Shoe shine: Spot should be rubbed out gently without
damaging the cloth and be scrubbed and rinsed with
detergent. If not removed, it should be scrubbed using the
mixture obtained by adding 1 scale of alcohol (96˚) into 2
scales of water, and then be washed with warm water.
Tea and coffee: Stretch the spotted area of your laundry
over an openning of a container, and pour over as much hot
water that the type of your laundry can resist. If the type of
your laundry permits it, wash with bleach.
Chocolate and cocoa: After submerging you laundry in
cold water and rubbing it using soap or detergent, wash it in
the temperature wash that the fabric type of your laundry
can resist. In case the oil stain is still visible, wipe with
oxygen water (3%).
Tomato paste: After rubbing out the dried substances
without damaging your laundry, submerge it in water for 30
minutes, and then scrub and wash it with detergent.
Bouillon-egg: Remove dried spot residues on your laundry,
and then wipe it with a sponge or soft cloth that has been
submerged in cold water. Scrub with detergent, wash with
diluted bleach.
Gres ve yağ lekesi: Firstly, wipe the residues. Scrub the
spot with detergent and wash it with warm soapy water.
Mustard: Apply glycerine on spotted area. Scrub with
detergent and wash. If spot cannot be removed, wipe with
alcohol. (For synthetic and colour fabrics, a mixture of 1
scale of alcohol and 2 scales of water should be used)
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 9: PRACTICAL INFORMATION
Blood stain: Submerge your laundry in cold water for
30 minutes. If the stain is not removed, then submerge
in a mixture of water and ammoniac (3 spoons of
ammoniac in 4 litres of water) for 30 minutes.
Cream, ice cream and milk: Submerge your laundry in
cold water and scrub the spotted area with detergent. If
the spot is not removed, apply bleach to the extent
suitable for your laundry. (Do not use bleach on
coloured laundry.)
Muff: Muff stains should be cleaned as soon as
possible. Stain should be washed with detergent water,
nevertheless if it cannot be removed, it should be wiped
with oxygen water (3%).
Ink: Subject the spotted area to running water and wait
until the flow of inked water ends. Then, wipe it with
lemon water and detergent, and wash it after 5 minutes.
Fruit: Stretch the spotted area of your laundry over the
opening of a container, and pour cold water on it. Do not
pour hot water on the spot. Wipe with cold water and
apply glycerine. Allow 1-2 hours, wipe with a few drops
of white vinegar, and rinse it.
Grass stain: Wipe the stained part with detergent. If
your type of your cloth permits it, wash it with bleach.
Wipe your woollen laundry with alcohol. (For colour
fabrics, a mixture of 1 scale of pure alcohol and 2 scales
of water)
Oil paint: Spot should be removed by applying thinner
before drying. Then, it should be wiped with detergent
and washed.
Burn stain: If your laundry is suitable for applying
bleach, you can add bleach into the washing water. For
woollen fabrics, a cloth previously submerged in oxygen
water should be covered over the stain, and it should be
ironed after putting a dry cloth on this cloth. It should be
washed after being rinsed properly.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 10: TROUBLESHOOTING
All repairing operations required for your machine should be carried
out by our authorised service. If your machine requires a repair or if
you cannot remove the fault by the help of the information provided as
follows:
Unplug your machine.
Turn the water faucet off.
Contact the nearest authorised service.
REMOVING
METHODS
FAULT
POSSIBLE CAUSE
It is not plugged in.
Fuses out of order.
Electricity cut-off.
Start/pause button
not pressed.
Plug it in.
Replace the fuses.
Check mains power.
Press on start/pause
button.
Switch the
programme knob to
the desired position.
Your machine does
not start.
Programme knob on
position 0.
The machine door is
not completely
closed.
Close the machine
door.
Your faucet is turned
off.
Turn your faucet on.
Water inlet hose may Check water inlet
be twisted.
hose.
Water inlet hose
clogged.
Valve inlet filter
clogged.
Clean water inlet
hose filters. (*)
Clean the valve inlet
filters. (*)
Your machine does
not intake water.
The machine door is
not completely
closed.
Close the machine
door.
(*) See the chapter regarding maintenance and cleaning of your
machine.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 10: TROUBLESHOOTING
REMOVING
METHODS
FAULT
POSSIBLE CAUSE
Discharging hose
clogged or twisted.
Check the
discharging hose.
Clean the pump
filter. (*)
Pump filter clogged.
Your machine does
not discharge water.
Spread your
Laundry settled in
the machine
unevenly.
laundries in the
machine properly
and evenly.
The stays of your
machine not
adjusted.
Adjust the stays of
your machine. (**)
Safety assembly
fitted for transport
not disassembled.
Less amount of
laundry in the
appliance.
Disassemble the
safety assembly of
your machine. (**)
This will not block
operation of your
machine.
Do not put in laundry
more than the
amount
recommended and
settle the laundry in
the machine evenly.
Prevent your
Your machine
Your machine
vibrates.
overloaded with
laundry or laundry
settled unevenly.
machine from resting
on hard surfaces.
When settling your
machine, leave 2 cm
space between it and
wall or hard
Your machine rests
on a hard surface.
surfaces.
(*) See the chapter regarding maintenance and cleaning of your
machine.
(**) See the chapter regarding installation of your machine.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 10: TROUBLESHOOTING
REMOVING
METHODS
FAULT
POSSIBLE CAUSE
Press on Start/Pause
button. To eliminate
foam formation, mix a
spoon of softener with
half litre of water, and
pour the mixture in
the detergent drawer.
After 5-10 minutes,
press on Start/Pause
button again. For next
washing operation,
decide the dose of
detergent as required.
Use detergents
Excessive amount of
detergent used.
Excessive foam is
formed in the
detergent drawer.
produced only for
automatic washing
machines in your
machine.
Wrong detergent
used.
Select the programme
appropriate for correct
dirtiness of your
The dirtiness of your
laundry does not
match the programme
you have chosen.
laundry. (see
programme table)
Adjust the amount of
detergent based on
the dirt level of your
laundry.
Amount of detergent
used insufficient.
Unsatisfactory
washing result.
Load your machine
with laundry, amount
of which shouldl not
exceed maximum
laundry capacity
Laundry in excess of
maximum capacity
put in your machine.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 10: TROUBLESHOOTING
REMOVING
METHODS
FAULT
POSSIBLE CAUSE
Adjust the amount of
detergent based on
the instructions of the
detergent
Water being hard.
Unsatisfactory
washing result.
manufacturer.
Laundry distributed in Spread your laundries
your machine
unevenly.
The end of water
discharging hose is
too low for the
machine.
in the machine
properly and evenly.
Set the water
discharging hose on
appropriate height.
(**)
As soon as the
machine is loaded
with water, water
discharges.
No water appears in
the drum during
washing.
No fault. Water in the
non-visible part of the
drum.
-
Perform an extra
rinsing by setting your
machine to “Rinsing”
programme, or clean
the spots using a
brush after your
laundry dries.
Non-dissolving
particles of some
detergents may
adhere to your
laundries as white
spots.
Laundry has
detergent residues on
it.
Use the maximum
amount of detergent
instructed by the
detergent
manufacturer in the
next washing
The reason for this
spots may be oil,
cream or ointment.
Grey spots appear on
the laundry.
operation.
(**) See the chapter regarding installation of your machine.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 10: TROUBLESHOOTING
REMOVING
METHODS
FAULT
POSSIBLE CAUSE
Unbalanced load
control system will
try to spread your
laundries evenly.
Wringing operation
will start after
spreading your
laundry. Put your
laundry in the
No fault. Unbalanced
load control system
has been activated.
Wringing operation is
not performed or
runs late.
machine evenly in
the next washing
operation.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 11: AUTOMATIC FAULT WARNINGS AND WHAT
TO BE DONE
Your machine is equipped with systems that continually self-check
during washing operations and then take the necessary precautions
and warn you in case of any breakdown.
TROUBLE
CODE
POSSIBLE
FAULT
WHAT TO DO
Close the machine door. If your
machine persists to indicate
fault, turn off your machine,
unplug it and contact the
nearest authorised service
immediately.
The door of
your machine
is left open.
E01
E03
Pump is faulty
or pump filter is
clogged or
electrical
connection of
the pump is
faulty.
Clean the pump filter.
If the problem persists, contact
the nearest authorised service.
(*)
Your machine will discharge
water by itself. After the
discharging operation, turn off
your machine and unplug it.
Turn off your faucet and
contact the nearest authorised
service.
Your machine
has an
excessive
amount of
water.
E04
(*) See the chapter regarding maintenance and cleaning of your
machine.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 11: AUTOMATIC FAULT WARNINGS AND WHAT
TO BE DONE
TROUBLE CODE
POSSIBLE
FAULT
WHAT TO DO
- Water faucet may be
closed. Check.
- Mains water may be cut-off.
Check.
- If so, switch the programme
knob to position 0. You can
select a programme and run
your machine after the mains
water is supplied.
- Mains water pressure may
be low. Check.
- Water inlet hose may be
twisted. Check.
- Water inlet hose may be
clogged.
Water cut-off
or low mains
water
pressure..
- Clean water inlet hose
filters. (*)
- Valve inlet filter may be
clogged.
- Clean the valve inlet filters.
(*)
If the problem persists,
unplug your machine, turn off
your faucet and contact the
nearest authorised service.
- Pump filter may be clogged.
Clean the pump filter. (*)
Pump is
faulty or
pump filter is - Discharging hose may be
clogged or
electrical
clogged or twisted. Check the
discharging hose.
connection
If the problem persists,
of the pump contact the nearest
is faulty. authorised service. (*)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 12: DESCRIBING SAVING ENERGY
Energy and water consumption may vary based on water pressure,
water hardness, water temperature, ambient temperature, laundry
amount, additional function selection, and voltage fluctuations.
It will reduce energy and water consumption to use your machine
with the laundry capacity proposed for the selected programme,
wash your less dirty or daily laundry in short programmes, carry out
cleaning and maintenance periodically, use your machine at the
convenient time intervals specified by electricity vendor.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
For Customer Services &
Warranty Information please call
0845 683 8717
Opening times:
Monday - Friday
8am until 8pm
Saturday & Sunday 10am until 4pm
Customer Service Department
Picktree Court
Picktree Lane
Chester-le-Street
Co Durham
DH3 3SY
Revision 1
This symbol is known as the 'Crossed-out wheelie bin Symbol'. When this
symbol is marked on a product/batteries, it means that the product/batteries
should not be disposed of with your general household waste. Only discard
electrical/electronic/battery items in separate collection schemes, which cater
for the recovery and recycling of materials contained within. Your co-operation
is vital to make sure the success of these schemes and for the protection of the
environment. For your nearest disposal facility, visit www.recycle-more.co.uk
or ask in store for details.
We reserve the right, due to possible changes to product design, to alter the
instruction manual without prior notice.
52035051
Download from Www.Somanuals.com. All Manuals Search And Download.
|