Rosewill Network Card RC304 E User Guide

2 ports Parallel PCIe Card RC304-E  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 ports Parallel PCIe Card RC304-E  
User Manual  
3.Check Specify a location, uncheck the other boxes, then click Next.  
4.Insert the Driver CD, type in D:\PCIe\2P\2000, then click OK. (Change D: to match your CD-ROM driver letter)  
5.Click Next and Finish.  
6.Restart Windows to complete the installation.  
For Windows® XP  
1.At the Found New Hardware Wizard, select Install from a list or specific location(Advanced), then click Next.  
2.Insert the Driver CD, check Include this location in the search, uncheck the other box, type in D:\PCIe\2P\XP, then  
click OK. (Change D: to match your CD-ROM drive letter)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 ports Parallel PCIe Card RC304-E  
User Manual  
3.If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly  
tested for stability and compatibility.  
4.Repeat steps 1-3 two more times.  
5.Restart Windows to complete the installation.  
For Windows® Server 2003  
1.At the Found New Hardware Wizard, select Install from a list or specific location(Advanced), then click Next.  
2.Insert the Driver CD, check Include this location in the search, uncheck the other box, type in D:\PCIe\2P\2003, then  
click OK. (Change D: to match your CD-ROM drive letter)  
3.If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly  
tested for stability and compatibility.  
4.Repeat steps 1-3 two more times.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 ports Parallel PCIe Card RC304-E  
User Manual  
Restart Windows to complete the installation.  
To Verify Windows® 2000/XP/Server 20003 Installation  
1. Right click My Computer, then click Manage. Click Device Manager.  
2. Click on the +(plus sign) in front of Ports(COM & LPT), two NetMos PCI ECP Parallel Port … should be displayed.  
3. Double click Multifunction adapters, NetMos 9815 PCI Multi-I/O Controller should be displayed.  
Change Parallel Port Address  
Some parallel devices need a specific parallel port in order to work. If your parallel devices works properly, do not change  
this settings.  
For Windows® 2000/XP/Server 20003 Installation  
1.From the Device Manager window double click Ports(COM & LPT), then double click the NetMos PCI ECP Parallel  
Port …  
2.Click Port Settings tab.  
3.At the LPT Port Number box, click the down arrow and select an LPT port that is not in use.  
Click OK, then close Device Manager to save the changes.  
Thank you for purchasing a quality Rosewill Product.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Automobile Alarm TD 1500 User Guide
Remington Electric Shaver MS2 150 User Guide
RIDGID Saw R3210 1 User Guide
Rotel Car Video System RSDX 02 User Guide
Samsung Digital Camera D452N User Guide
Samsung Laptop NP900X3EK01US User Guide
Samsung Stereo System AH68 01145B User Guide
Samsung Telephone SGH x475 User Guide
Schneider Electric Blood Glucose Meter ECN 161A User Guide
Sears Lawn Mower 917251551 User Guide