Roberts Radio Radio RD 27 User Guide

RD-27  
FM RDS/DAB digital radio  
with  
Please read this manual before use  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
(Top)  
1
2
3
4
5
6
7
8
9
10  
11  
18  
17  
16  
15  
14  
13  
12  
1. Telescopic aerial (on rear)  
2. On/Off button  
7. Line out socket (on rear)  
8. Auto Tune button  
9. FM/DAB button  
13. Tuning up button  
14. Tuning down button  
15. Liquid crystal display (LCD)  
16. Treble control  
3. Mains LED indicator  
4. Station presets  
10. Info button  
5. Headphone socket (on rear)  
6. button  
11. Select/Real Time button  
12. Tuning control  
17. Bass control  
18. Volume control  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
020 8758 0338 (Mon-Fri)  
Battery operation  
1. Remove the Battery cover on the rear of the unit by pushing the  
battery door in and downwards.  
2. Insert six LR20 (D size) batteries into the spaces in the compartment.  
Take care to ensure all batteries are inserted with the correct polarity  
as shown inside the battery compartment. Replace the battery cover.  
3. Reduced power, distortion and a ‘stuttering’ sound are all signs that  
the batteries may need replacing.  
4. If the radio is not to be used for any extended period of time it is  
recommended that the batteries are removed from the radio.  
We would recommend for economy that the RD-27 is used on the  
mains whenever possible with battery operation for occasional or  
stand-by use only.  
IMPORTANT: The batteries should not be exposed to excessive  
heat such as sunshine, fire or the like. After use, disposable  
batteries should if possible be taken to a suitable recycling centre.  
On no account should batteries be disposed of by incineration.  
Mains operation  
1. Place your radio on a flat surface.  
2. Plug the mains lead into the Socket located on the rear of your radio  
ensuring that the plug is pushed fully into the socket.  
3. Plug the other end of the mains lead into a wall socket and switch  
on the wall socket.  
IMPORTANT: The mains plug is used as the means of connecting  
the radio to the mains supply. The mains socket used for the radio  
must remain accessible during normal use. In order to disconnect the  
radio from the mains completely, the mains plug should be removed  
from the mains socket outlet completely.  
4. When the mains LED is off, it indicates that the radio is completely  
disconnected from the mains.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Operating your radio - DAB  
2
1. Carefully extend the telescopic aerial.  
2. Press the On/Off button to switch on your radio. The display will  
show "Roberts DAB digital radio" for a few seconds.  
3. If this is the first time the radio is used a quick scan of UK Band III DAB  
channels will be carried out. The display will show "Autotune Quick  
scan". If the radio has been used before the last used station will be  
selected.  
4. During Autotune as each group of stations is detected the bottom line  
of the display will show its name and the station count will be updated.  
The top line of the display shows a bargraph indicating progress of  
the Autotune.  
5. When the Autotune is completed the first station (in numeric-alpha  
order 0...9...A....Z) will be selected.  
6. If the station list is still empty after the Autotune your radio will display  
"No Signal".  
7. If no signals are found it may be necessary to relocate your radio  
to a position giving better reception.  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
020 8758 0338 (Mon-Fri)  
Selecting a station - DAB  
1. The top line of the display shows the name of the station currently  
selected.  
2. Rotate the Tuning control or press the Up or Down buttons to scroll  
through the list of available stations.  
2
2
3. Press and release the Select/real time button to select the station.  
The display may show "Tuning" while your radio finds the new  
station.  
2
4. Adjust the Volume and Tone controls to the required settings.  
Note: If after selecting a station the display shows "Not Available" it  
may be necessary to relocate your radio to a position giving better  
reception.  
3
4
4
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Secondary services - DAB  
1. Certain radio stations have one or more secondary services associ-  
ated with them. If a station has a secondary service associated with  
it the display will show ">" next to the station name on the station list.  
The secondary service will then appear immediately after the primary  
service as you turn the tuning control.  
Display modes - DAB  
Your radio has six display modes:-  
a
1
1. Press the Info button to cycle through the various modes.  
b
c
a. Scrolling text  
Displays scrolling text messages such  
as artist/track name, phone in number,  
etc.  
b. Programme Type  
c. Multiplex Name  
d. Signal strength  
Displays type of station being listened to  
e.g. Pop, Classic, News, etc.  
Displays name of multiplex to which  
current station belongs.  
d
e
f
Displays signal strength for station being  
listened to.  
e. Time and date  
f. Maximum delay  
Displays current time and date.  
Displays maximum  
delay  
for current station (see page 9).  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
020 8758 0338 (Mon-Fri)  
Finding new stations - DAB  
As time passes new stations may become available. To find new  
stations proceed as follows:-  
1
1. Press and release the Auto Tune button, the display will show  
Autotune Quick scan. Your radio will perform a scan of the UK DAB  
frequencies. As new stations are found the station counter on the  
right-hand side of the display will increase and stations will be added  
to the list.  
2. To carry out a full scan of the entire DAB Band III frequencies press  
and hold down the Auto Tune button for more than 2 seconds and  
then release. The display will show Autotune Full scan. As new  
stations are found the station counter on the right-hand side of the  
display will increase and stations will be added to the list.  
2
Autoselect - DAB  
As an alternative to pressing the Select/real time button to select a  
station your radio can be set so as to automatically select a station.  
1
1. Rotate the Tuning control a few clicks in either direction, imme-  
diately press and hold down the Select/real time button until the  
display shows Autoselect ON.  
2. Rotate the Tuning control or press the Up or Down buttons until  
the station you require is visible on the display. After a few seconds  
your radio will automatically select the station shown on the display.  
3. To switch off autoselect rotate the Tuning control a few clicks  
in either direction, immediately press and hold down the Select/real  
time button until the display shows Autoselect OFF.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Manual Tuning - DAB  
Manual tuning allows you to tune directly to the various Band III DAB  
channels. UK DAB stations are currently located in the range 11B to 12D.  
1
1. Press and hold down the Select/real time button until the display  
shows Manual tune. Release the Select/real time button.  
2. Rotate the Tuning control or press the Up or Down buttons to  
2
select the required DAB channel.  
3. Press and release the Select/real time button to select the  
channel.  
2
4. Rotate the Tuning control or press the Up or Down buttons to  
select the stations contained within the Multiplex (group of stations)  
for the selected DAB channel.  
2
5. Press and release the Select/real time button to return to normal  
3
tuning mode.  
Signal strength display - DAB  
1. Repeatedly press and release the Info button until the lower line  
of the display shows signal strength - see diagram.  
2. Position your radio and carefully angle the telescopic aerial for best  
reception using the signal strength display as a guide. Move your  
radio around and position to give maximum number of black rectan-  
gles on signal strength display. The clear unfilled rectangle indicates  
minimum signal level required for satisfactory reception.  
1
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
020 8758 0338 (Mon-Fri)  
Using your radio's Pause Plus feature  
How many times has your favourite radio station been interrupted  
by that phone call from a double glazing firm or someone selling that  
must have item? Sound familiar? Now with a single press of the  
1
2
button you can put your favourite station on hold while  
you answer that important call. After the call or other important task  
is finished simply press the  
button to return to your  
favourite station exactly where you left off so that you never miss  
a single word.  
Radio stations can effectively be put on hold for typically 20 minutes  
but can be up to 35 minutes depending on the station you are listening  
to.  
Note the  
feature only operates on the DAB  
waveband.  
1. To place your radio in  
modesimplypressthe  
button, the sound from the loudspeaker will be muted. The display  
will alternate between PAUSE and the time which the radio station  
has been on Pause.  
3
2. To return to the radio station that you were listening to simply press  
the  
button and your radio will continue playing from  
where you left off. The display will alternate between DELAY and  
the amount by which you are behind real time.  
3. When using your radio's  
feature the lower line of display  
automatically switches to show the Maximum delay time for the  
station you are listening to.  
4
4. To return to real time press and release the Select/real time  
button; the display will return to show DAB in the right hand corner.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pause Plus continued  
1. As soon as you switch on your radio the  
feature is  
working silently in the background so, say for example, you want  
to hear a news item again press the twice and rotate the  
1
tuning control anti-clockwise to scroll back to the item you wish to  
listen. The display will show the amount of time you have scrolled  
back.  
1
Note the  
memory only starts when your radio is  
switched on.  
1
2. When using your radios  
feature the lower line of display  
automatically switches to show the Maximum delay time for the  
station you are listening to.  
Note the  
memory is cleared when changing sta-  
tions, or switching off your radio.  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
020 8758 0338 (Mon-Fri)  
Operating your radio - FM  
2
3
1. Carefully extend the telescopic aerial.  
2. Press the On/Off button to switch on your radio. The display will  
show "Roberts DAB digital radio" for a few seconds.  
3. Press the FM/DAB button to select the FM band.  
4
4
4. Press and hold down either the Up or Down buttons until the  
frequency in the display begins to change rapidly. Release the  
button. Your radio will scan the FM waveband, stopping each time  
it finds a station of sufficient strength.  
5. After a few seconds the display will update and show station name.  
6. To find other stations press and hold down the Up or Down button  
as before.  
8
8
7. When the waveband end is reached your radio will recommence  
tuning from the opposite waveband end.  
8
8. Adjust the Volume and Tone controls to the required settings.  
9. To switch off your radio press the On/Off button.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Manual tuning - FM  
1
3
2
3
1. Press the On/Off button to switch on your radio.  
2. Press the FM/DAB button to select the FM band. Fully extend the  
Telescopic aerial.  
3. Rotate the Tuning control or press the Up or Down buttons to  
tune to a station. The frequency will change in steps of 50kHz.  
3
4. When the waveband end is reached the radio will recommence  
tuning from the opposite waveband end.  
5. Set the Volume and Tone controls to the desired settings.  
6. To switch off your radio press the On/Off button.  
5
5
5
6
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
020 8758 0338 (Mon-Fri)  
Display modes - FM  
a
On FM the bottom line of the display can be set to any of the following  
modes:-  
1
1. Press the Info button to cycle through the various modes.  
b
c
a. Scrolling text  
Displays scrolling text messages such  
as artist/track name, phone in number  
etc.  
b. Programme Type  
c. Signal strength  
Displays type of station being listened to  
e.g. Pop, Classic, News etc.  
d
Displays signal strength for station being  
listened to.  
e
f
d. Time and date  
e. Frequency  
Displays current time and date.  
Displays frequency of the station being  
listened to.  
f. Audio mode  
Display shows Auto (stereo) or mono.  
FM Stereo/Mono  
1. If a station being received is weak some hiss may be audible. To  
reduce the hiss press and release the Select/real time button  
until the display shows Audio mode : Mono, your radio will switch  
to mono mode.  
1
2. To return to stereo mode press and release the Select/real time  
button until the display shows Audio mode :Auto, your radio will  
switch to stereo mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Presetting stations - DAB and FM  
1
There are 5 memory presets for each of the 2 wavebands.  
1. Press the On/Off button to switch on the radio.  
2. Tune to the required station as previously described.  
3
3. Press and hold down the required Preset button until the display  
shows e.g. Preset 1 stored. The station will be stored under the  
chosen preset button. Repeat this procedure for the remaining  
presets.  
4. Stations stored in preset memories may be overwritten by following  
the above procedure.  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
020 8758 0338 (Mon-Fri)  
Recalling a preset station - DAB and FM  
1
2
1. Press the On/Off button to switch on the radio.  
2. Select the required waveband by pressing the FM/DAB button.  
3. Momentarily press the required Preset button, your radio will tune  
to the station stored in preset memory.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
System reset  
1
2
If your radio fails to operate correctly, or some digits on the display are  
missing or incomplete carry out the following procedure.  
1. Switch off your radio  
2. Switch on your radio - before the screen shows Roberts DAB digital  
radio, press and hold down the Select/real time button until the  
display shows System Reset.  
2
3. A full reset will be performed all presets and station lists will be  
erased.  
4. If DAB was used last then a Quick scan will be performed, otherwise  
a Quick scan will be carried out the next time the DAB band is  
selected.  
If a problem persists our technical staff would be pleased  
to offer any assistance on operating the radio. Our technical  
helpline number is 020 8758 0338.  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
020 8758 0338 (Mon-Fri)  
Headphone socket  
A 3.5mm Headphone Socket located on the rear of your radio is  
provided for use with either headphones or an earpiece. Inserting a plug  
automatically mutes the internal loudspeaker.  
IMPORTANT: Excessive sound pressure from earphones and head-  
phones can cause hearing loss.  
Line out socket  
A 3.5mm Line out socket located on the rear of your radio is provided  
for connecting the audio signal to an external amplifier. Inserting a line out  
audio cable will not mute the internal loudspeaker. Set the volume control  
to minimum if desired.  
Display backlight  
1. The display backlight will be switched on for approximately 12  
seconds when any button is pressed. (If using battery source)  
2. When your radio is powered by AC mains the display backlight will  
always be switched on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
No objects filled with liquids such as vases, shall be placed on  
the radio.  
General  
Do not allow this radio to be exposed to water, steam or sand. Do not  
leave your radio where excessive heat could cause damage such as in  
a parked car where the heat from the sun can build up even though the  
outside temperature may not seem too high. It is recommended that the  
DAB band be used wherever possible as better results in terms of quality  
and freedom from interference will usually be obtained than on the FM  
band.  
It is recommended to operate the product such that there is a minimum  
distance (10cm recommended) to adjacent objects in order to  
ensure good ventilation.  
The ventilation of the product should not be restricted by covering  
it or its ventilation openings with items such as newspapers, table-  
cloths, curtains etc.  
In case of misfunction due to electrostatic discharge reset your radio  
following the proceedure on page 16 (reconnection of power source  
may be required) to resume normal operation.  
No naked flame sources such as lighted candles should be placed  
on the product.  
It is recommended to avoid using or storing the product at extremes  
of temperature. Avoid leaving the unit in cars, on window sills in  
direct sunlight etc.  
The nameplate is located on the underside of your radio.  
Specifications  
Power Requirements  
Circuit Features  
Loudspeaker  
Mains  
AC 230 volts, 50Hz  
6 x LR20 (D size)  
only  
2 x 79mm 4ohms  
3W into 4ohms  
Batteries  
Output Power  
Battery Life  
Approx. 17 hours of listening for 4 hours a day  
at normal volume using alkaline cells.  
Headphone socket  
Line out socket  
3.5mm dia  
3.5mm dia  
Frequency Coverage  
Aerial System FM  
Telescopic aerial  
FM  
87.5-108MHz  
DAB 174.928 - 239.200MHz  
DAB Telescopic aerial  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
020 8758 0338 (Mon-Fri)  
Mains supply  
The RD-27 will operate from a supply of AC 230 volts, 50Hz  
only.  
The wire coloured BLUE must be connected to the terminal marked N or  
coloured BLACK.  
DO NOT cut off the mains plug from this equipment. If the plug  
fitted is not suitable for the power points in your home or the cable is too  
short to reach a power point, then obtain an appropriate safety approved  
extension lead or adaptor. If in doubt consult your dealer.  
The wire coloured BROWN must be connected to the terminal marked L  
or coloured RED.  
If nonetheless the mains plug is cut off, remove the fuse and dispose of  
the plug immediately to avoid a possible shock hazard by inadvertent  
connection to the mains supply.  
If this product is not supplied with a mains plug, or one has to be fitted,  
then follow the instructions given below:  
IMPORTANT. DO NOT make any connection to the larger terminal which  
is marked with the letter E or by the safety earth symbol  
Green or Green-and-yellow.  
or coloured  
The wires in the mains lead are coloured in accordance with the following  
codes :-  
BLUE - NEUTRAL  
BROWN - LIVE  
Fuse  
When replacing the fuse only a 3A ASTA approved to BS1362 type  
should be used and be sure to re-fit the fuse cover.  
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN.  
Replacement fuse holders are available from Roberts Radio Technical  
Services at the address shown on the rear of this manual.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Guarantee  
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component  
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free  
of charge.  
The guarantee does not cover:  
1. Damage resulting from incorrect use.  
2. Consequential damage.  
3. Receivers with removed or defaced serial numbers.  
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.  
Procedure:  
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer  
will be able to attend to any defect quickly and efficiently but should it be necessary the dealer will return the instrument to the Company’s service  
department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact  
Roberts Radio Technical Services at the address shown on the rear of this manual.  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
020 8758 0338 (Mon-Fri)  
ROBERTS RADIO TECHNICAL SERVICES  
97-99 Worton Road  
Isleworth Middlesex  
TW7 6EG  
Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Issue3  

PYLE Audio Stereo System PLCD82MP User Guide
Quantum Washer Dryer SFNLCFS User Guide
Radio Shack Portable Radio 21 1679 User Guide
Regalo Utility Trailer 4022HD User Guide
Samsung Digital Camera Digimax 130 User Guide
Samsung Personal Computer DP700A3D A01US User Guide
Samsung Projector SP M221 User Guide
Sansui CRT Television HDLCD2650 User Guide
Sanus Systems Indoor Furnishings EFAB II User Guide
Sennheiser Headphones EH 2270 User Guide