Renesas Computer Hardware M32173T PTC User Guide

M32173T-PTC  
Converter Board for In-circuit Connection (for M32173F2VFP/M32172F2VFP)  
User's Manual  
Keep safety first in your circuit designs!  
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more  
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property  
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,  
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.  
Notes regarding these materials  
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's  
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,  
Renesas Solutions Corporation or a third party.  
• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,  
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.  
• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the  
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice  
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The  
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions  
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://  
www.renesas.com).  
• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure  
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology  
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.  
• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human  
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,  
medical, aerospace, nuclear, or undersea repeater use.  
• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part  
these materials.  
• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese  
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and  
regulations of Japan and/or the country of destination is prohibited.  
• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.  
Precautions to be taken when using this product  
• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have  
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some  
experiment else.  
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does  
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.  
• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the  
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.  
Renesas Tools Homepage http://www.renesas.com/en/tools  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Rev.1.00  
September 1, 2003  
REJ10J0269-0100Z  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Connection Procedure  
The procedure for connecting the M32173T-PTC is shown  
below.  
(1) Mount the NQPACK144SD.  
(2) Mount the YQPACK144SD on the NQPACK144SD.  
(3) Secure the four corners of the YQPACK144SD with the  
YQ-GUIDE's.  
(4) Set the clock select switch.  
For details, refer to "6. Selecting the Clock" shown  
below.  
(5) Connect the probe of the emulation pod and the M32173T-  
PTC via the SDI MCU control interface cable and the  
SDI trace interface cable.  
(6) Mount the M32173T-PTC on the YQPACK144SD.  
Figure 3 Connection procedure of M32173T-PTC  
6. Selecting the Clock  
Mount an oscillator to X2 as  
shown in the diagram printed on  
the board.  
With the M32173T-PTC, it is possible to select the clock  
supply to the MCU by the clock select switch (SW1). Select  
the clock supply as shown below.  
However, when using the M32173T-PTC, the clock cannot  
be supplied from the target system.  
Connected to XIN pin of MCU  
ConnectedtoXOUTpinofMCU  
10 MHz: Supplies the clock (X1: 10 MHz) on the M32173T-  
PTC board to the MCU.  
R9: 1M   
R7: 510 Ω  
C20: 27 pF  
C22: 27 pF  
SOCKET: Supplies the clock to the MCU from the socket  
(X2) for mounting the oscillator on the M32173T-  
PTC board. By mounting the oscillator to the X2  
socket of the MCU, it is possible to change the  
operating frequency.  
Figure 4 Connection diagram of X2 socket  
For more details on the connecting the X2 socket  
and the MCU, see Figure 4 (right).  
( 3 / 5 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. External Dimensions and Sample Foot Pattern of M32173T-PTC  
Figure 5 External dimensions and sample foot pattern of M32173T-PTC  
( 4 / 5 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Precautions  
CAUTION  
Cautions to Be Taken for Emulator:  
• For debugging, use this product in the combination with the M32170T-SDI or  
M32100T-SDI-E emulator.  
• When starting up emulator debugger PD32R, select the MCU file below according  
to the type name and the operation mode of the MCU to be debugged.  
MCU type name Single-chip and memory expansion modes  
Microprocessor mode  
M32172F2VFP  
M32173F2VFP  
M32172F2VWG_MCU.MCU  
M32173F2VWG_MCU.MCU  
M32172F2VWG_MPU.MCU  
M32173F2VWG_MPU.MCU  
• Connect the both cables for connecting the emulator, the SDI MCU control interface  
cable (10-pin) and the SDI trace interface cable (20-pin).  
• For the precautions for the combination of the emulator, refer to the user's manual  
of the M32170T-SDI or M32100T-SDI-E.  
Cautions for Differences between MCU and This Product:  
• For debugging, as the M32173F2VWG (32KB internal SRAM) on the M32173T-  
PTC is used, be careful about the difference of the SRAM size when using the  
M32172F2VFP.  
• When setting the clock select switch to the "SOCKET" side, the oscillation occurs  
by itself, be careful about the difference of the resister value and the capacitor.  
• The capacity load of the all lines of the MCU will increase depending on wirings and  
connectors. Use the part whose timing is critical after checking it works properly.  
Cautions to Be Taken for This Product:  
• When connecting the YQPACK144SD, be sure to use the included YQ-GUIDE's.  
• We cannot accept any request for repair.  
• For purchasing the NQPACK144SD, YQPACK144SD and HQPACK144SD, contact  
the following:  
Daimaru Kogyo Ltd.  
Tokyo Eletech Corporation  
• For inquiries about the product or the contents of this manual, contact your local  
distributor.  
Renesas Tools Homepage http://www.renesas.com/en/tools  
( 5 / 5 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Satellite Radio DRD212NW User Guide
Ricoh Telephone Broadband Digital TV Phone User Guide
Rockford Fosgate Stereo Amplifier p3002 User Guide
Royal Sovereign Laminator PL 922 User Guide
Salton Popcorn Poppers SD8PC3D User Guide
Samsung Printer 315W User Guide
Sangean Electronics Portable Radio ATS 404 User Guide
Sanyo Air Conditioner 42T72R User Guide
Scag Power Equipment Lawn Mower GC STC CS User Guide
SECO LARM USA Power Supply PH A1612 GUQ User Guide