Radio Shack Clock 63 1420 User Guide

setting the clock  
Depending on your location, you may or may not  
receive an atomic clock signal. If you install batteries  
1) select a city or time zone  
2) manually set the current time  
3) set the home time  
63-1420  
select a city or time zone  
Worldwide Atomic Clock  
There are 32 cities and four US time zones stored  
in your clock. Each city is represented by an  
and the signal strength indicator ( ) does not appear,  
Ê
Thank you for purchasing your Worldwide Atomic Clock  
from RadioShack. It receives signals from atomic clock  
generators so you will always know the exact time. Your  
clock automatically updates to the current local time  
when you travel, and you can set it to automatically  
update for Daylight Savings Time. The clock’s display  
shows your home time, the local time (wherever you are  
currently located), time zone, temperature, and day of  
the week.  
you are in an area that does not receive a signal  
from an atomic clock. See “in regions not receiving  
an atomic clock signal”.  
abbreviated name, and it’s GMT (Greenwich Mean  
Time). GMT refers to that city or region’s time  
relative to the International Date Line. For example,  
Honolulu is ten hours behind (-10), and Tokyo is nine  
hours ahead (+9) of the International Date Line.  
select a city or time zone  
Follow steps 1-3 as if you were in an area receiving  
an atomic clock signal.  
in regions receiving an atomic clock signal  
The sequence for setting your clock in a region  
receiving an atomic clock signal generator is:  
manually set the current time  
1. Hold down MODE until the hour digits flash.  
1. Press MODE three times. An abbreviation flashes.  
2. Press UP to scroll through the hours.  
1) automatic signal detection  
2) select a city or time zone  
3) set the home time  
2. Press UP to scroll until you see your home city. If  
your home city is not listed, select the city listed  
that is in your time zone.  
snooze  
3. Press SET to confirm the correct hour. The  
local time  
minute digits flash.  
4. Press UP to scroll through the minutes.  
automatic signal detection  
temperature /  
humidity  
Abbrev GMT  
City  
Honolulu  
Tehran  
Anchorage  
Dubai  
Pacific (USA)  
Kabul  
Mountain  
(US)  
Karachi  
Central (USA)  
New Delhi  
Eastern  
(USA)  
Abbrev GMT  
City  
London  
Hong Kong  
Paris  
Beijing  
Amsterdam  
Taipei  
1. After batteries are installed, the clock starts  
searching for an atomic clock signal and Ê  
flashes.  
HNL  
THR  
ANC  
DXB  
PST  
KBL  
-10  
+3.5  
-9  
+4  
-8  
LON  
HKG  
PAR  
PEK  
AMS  
TPE  
0
5. Press SET to confirm the correct minutes. The  
+8  
+1  
+8  
+1  
+8  
+1  
second digits flash.  
MODE  
time zone  
ON/OFF  
SET  
UP  
6. Press UP to reset the seconds to zero (00).  
2. In about 10 minutes, one of the following  
abbreviations appears momentarily to indicate  
the atomic clock from which you are receiving a  
signal:  
7. Press SET to confirm the seconds.  
+4.5  
-7  
8. Press UP to toggle between 12 or 24 hour time  
MST  
FRA  
Frankfurt  
format.  
KHL  
CST  
DEL  
EST  
+5  
-6  
+5.5  
-5  
TYO  
CAI  
+9  
+2  
Tokyo  
Cairo  
Adelaide  
Jerusalem  
9. Press SET to confirm the time format.  
Region  
USA  
Abbreviation  
home time  
ADL  
JRS  
+9.5  
+2  
10. Press MODE once to view the day, month, year  
US  
UK  
JP  
EU  
JP  
and date information.  
UK  
North Japan  
Europe  
South Japan  
11. Hold down MODE until the year digits flash.  
DAC  
CCS  
RGN  
RIO  
+6  
-4  
+6.5  
-3  
Dhaka  
SYD  
JED  
+10  
+3  
Sydney  
Jeddah  
Noumea  
Moscow  
Caracas  
Yangon  
Rio de  
Janeiro  
Bangkok  
12. Press UP to scroll through the years.  
NOU  
MCW  
+11  
+3  
13. Press SET to confirm the year. The month digits  
installing batteries  
flash.  
3. The local time, date, month and year are  
automatically set and briefly appear on the  
display.  
BKK  
+7  
WLG  
+12  
Wellington  
14. Press UP to scroll through the months.  
Your clock requires two AAA batteries (not supplied)  
for power.  
3. Press SET to confirm. The time, day, month, date  
15. Press SET to confirm the month. The date digits  
and year are automatically set.  
Notes:  
flash.  
1. Remove the battery  
compartment cover.  
set the home time  
1. Press MODE four times. The time zone (GMT) digits  
• During automatic signal detection, you cannot manually  
set the time. To override signal detection and manually  
set the time, hold down MODE, ON/OFF and SNOOZE until Ê  
stops flashing.  
16. Press UP to scroll through the dates.  
2. Insert two AAA  
batteries.  
17. Press SET to confirm the date.  
flash.  
2. Press UP to scroll until your home time zone  
(GMT) digits appear. For example, if you are from  
Texas, which is on CST, you will scroll until -6  
appears.  
Daylight Saving Time (DST)  
3. Replace the cover.  
• For best reception, keep the clock away from equipment  
that emits RF or microwave signals, such as TVs, radios,  
or microwaves.  
1. When in time mode, press MODE three times.  
Battery Notes:  
• Dispose of old batteries  
promptly and properly.  
2. Press ON/OFF to enable or disable DST. Your  
clock will automatically adjust to DST on the  
appropriate date.  
You may need to position your clock near a window for  
best reception.  
3. Press SET to confirm.  
• Do not burn or bury batteries.  
• The most dependable and clear signal is received at  
night, between midnight and 4am local time.  
in regions not receiving an atomic clock signal  
If your clock starts searching for a signal, you can  
disable it by holding down ON/OFF, SNOOZE, and MODE  
until Êstops flashing.The sequence for setting your  
clock in regions not receiving an atomic clock signal  
is:  
set the home time  
• Use only fresh batteries of the required size and  
recommended type.  
Follow steps 1-3 as if you were in an area receiving  
an atomic clock signal.  
• The clock receives an atomic signal update every 24  
hours and will update accordingly for your location.  
• Do not mix old and new batteries, or batteries with  
different capacities or different chemistries.  
• If you do not plan to use the clock for a month or more,  
remove the batteries. Batteries can leak chemicals that  
can damage electronic parts.  
Note: Actual product may vary from the images found in this  
document.  
what’s included  
Please read this user’s guide before  
installing, setting up and using your new product  
clock  
user’s guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RIDGID Saw 122XL User Guide
Rockford Fosgate Car Speaker RFB 1082 User Guide
Roland Drums TD 9KX User Guide
Roland Speaker System GI 20 User Guide
Ruckus Wireless Network Card MM2211 User Guide
Samsung Computer Drive SM 316 User Guide
Samsung Computer Drive SN 324 User Guide
Sanyo Cordless Telephone CLT 2418 User Guide
Sanyo CRT Television DS25500 User Guide
Sanyo DVR DSR M810 User Guide