43-968.fm Page 1 Monday, August 16, 1999 3:56 PM
Cat. No. 43-968
OWNER’S MANUAL
Please read before using this equipment.
System 60
15-Character Display
Caller ID
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 3 Monday, August 16, 1999 3:56 PM
FEATURES
Your RadioShack Caller ID System 60 is the latest in tele-
phone technology. The system displays the caller’s tele-
phone number (and name, if available in your area) and the
current date and time, as provided by your local phone com-
pany to Caller ID service subscribers.
Its features include:
Message Waiting
— the NEW CALL indicator flashes when
you have received at least one new call you have not re-
viewed.
Caller ID Memory
— stores and displays up to 10 call
records, including phone numbers and names.
Three-Language Operation
— lets you set the system to
display informational messages in English, Spanish, or
French.
© 1996 Tandy Corporation.
All Rights Reserved.
RadioShack is a trademark used by Tandy Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 4 Monday, August 16, 1999 3:56 PM
REVIEW s / t Buttons — let you easily scroll through all call
records in Caller ID memory.
Built-In Clock — displays the current date and time.
15-Character Dot Matrix LCD — makes it easy to see the
caller information, or the current date and time when not re-
ceiving calls.
Note: You need four AAA batteries (not supplied) to power
the System 60.
Important Information:
• To use this system, you must be in an area where
Caller ID service is available, and you must subscribe
to the service.
• Your Caller ID System 60 displays name only, number
only, or both name and number, depending upon the
information provided by your phone company.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 5 Monday, August 16, 1999 3:56 PM
This system has been tested and found to comply with all
applicable UL and FCC standards.
We recommend you record the system’s serial number
here. The number is on the label on the bottom of the sys-
tem.
Serial Number _____________________
READ THIS BEFORE INSTALLATION
Your caller ID system conforms to federal regulations, and
you can connect it to most telephone lines. However, each
device you connect to the phone line draws power from the
phone line. We refer to this power draw as the device’s ring-
er equivalence number, or REN. The REN is on the label on
the bottom of the system.
If you are using more than one phone or other device on the
line, add up all the RENs. If the total is more than five, your
phone might not ring. In rural areas, a total REN of three
5
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 6 Monday, August 16, 1999 3:56 PM
might impair ringer operation. If ringer operation is impaired,
remove a device from the line.
FCC STATEMENT
Your system complies with Part 68 of FCC Rules. You must,
upon request, provide the FCC Registration Number and
the REN to your phone company. These numbers are on
the label on the bottom of the system.
Note:
You must not connect the system to:
• Coin-operated systems
• Party-line systems
• Most electronic key telephone systems
6
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 7 Monday, August 16, 1999 3:56 PM
CONTENTS
Preparation ....................................................................... 8
Installing the Batteries and
Selecting the Display Language ................................. 8
Connecting to the Phone Line .................................. 12
Wall Mounting ........................................................... 14
Operation ........................................................................ 15
Receiving Incoming Calls ......................................... 15
Reviewing Calls ........................................................ 17
Display Messages .................................................... 18
Message Waiting ............................................... 21
Transmission Errors .......................................... 22
Deleting Call Information .......................................... 23
Care and Maintenance .................................................. 24
The FCC Wants You to Know ................................... 25
Lightning ................................................................... 27
7
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 8 Monday, August 16, 1999 3:56 PM
PREPARATION
INSTALLING THE BATTERIES AND
SELECTING THE DISPLAY
LANGUAGE
Your Caller ID System 60 is powered by four AAA batteries
(not supplied). For the longest operation, we recommend al-
kaline batteries (such as RadioShack Cat. No. 23-558).
Notes:
• When BATTERIES LOW appears on the display, re-
place the batteries.
• Always remove old or weak batteries. They can leak
chemicals which can damage electronic circuits.
• When you replace the batteries, the system loses all
call information, but the time is automatically set when
the system receives its first phone call.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 9 Monday, August 16, 1999 3:56 PM
Follow these steps to install the batteries and select the dis-
play language:
1. If connected, disconnect the system from the telephone
line.
2. Turn over the system so the bottom is facing up.
3. Using a Phillips screwdriver, remove the battery com-
partment’s safety locking screw.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 10 Monday, August 16, 1999 3:56 PM
4. Open the battery compartment by gently pressing down
on the battery door while sliding it in the direction of the
arrow.
5. Insert four AAA alkaline batteries in the compartment
+
as indicated by the polarity symbols ( and –) marked
inside the compartment.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 11 Monday, August 16, 1999 3:56 PM
6. Turn the system over so you can see REV110on the
display. The system then displays LANGUAGEfollowed
by ENGLISH.
7. If you want to select another language, press READ
once to display SPANISHor twice to display FRENCH.
Pressing READ a third time returns the display to
ENGLISH.
Note: If you do not press a key within 4 seconds after
pressing READ, the system selects English.
After you select the desired language, the system dis-
plays 00/00 12:00AM.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 12 Monday, August 16, 1999 3:56 PM
8. Replace the battery door and tighten the safety locking
screw.
Notes:
• The correct date and time are automatically set when
your Caller ID System 60 receives its first call.
• To reset the language, remove the batteries and rein-
stall them.
CONNECTING TO THE PHONE LINE
The Caller ID System 60 connects to a modular wall jack
and your telephone. If your telephone wiring does not have
a modular wall jack, you can update the wiring yourself.
RadioShack stores sell jacks and adapters necessary to
convert older wiring methods to modular wiring. Or, you can
have the telephone company update your telephone wiring
for you.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 13 Monday, August 16, 1999 3:56 PM
Notes:
• The telephone company charges to install the neces-
sary jacks.
• The USOC number of the jack to be installed is RJ11C.
Follow these steps to connect the system to the telephone
line.
1. Unplug the existing telephone line cord from the tele-
phone and plug it into the LINE jack on your Caller ID
System 60.
2. Plug one end of the supplied telephone line cord into
the System 60’s PHONE jack.
3. Plug the other end of that cord into your telephone.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 14 Monday, August 16, 1999 3:56 PM
WALL MOUNTING
You can mount the System 60 on a wall using the supplied
screws and mounting bracket.
1. Select a location near the phone line jack, then use the
supplied mounting bracket to mark the two mounting
holes on the wall.
2. Drill two holes at the marked locations.
3. Thread the screws through the bracket into the holes
and tighten.
4. Slide the System 60 onto the bracket.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 15 Monday, August 16, 1999 3:56 PM
OPERATION
RECEIVING INCOMING CALLS
Caller ID is a service provided by your telephone company.
When Caller ID is activated, the telephone company sends
the caller’s telephone number (and name, if available) and
the call’s date and time between the first and second rings.
The Caller ID System 60 receives and displays this informa-
tion for each call and updates the display with the current
date and time. The display also indicates if caller information
is not available or if the number is blocked by the sender
(see “Display Messages” on Page 18).
If the system has received a call since the last time call
records were reviewed, the NEW CALL indicator flashes
and the call information appears.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 16 Monday, August 16, 1999 3:56 PM
Notes:
• If you connect a telephone answering machine to the
same line as the Caller ID System 60, you must set the
answering machine to answer in two or more rings in
order to receive the Caller ID information.
• When the system’s memory is full, it automatically
deletes the oldest call record as a new call comes in.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 17 Monday, August 16, 1999 3:56 PM
REVIEWING CALLS
Follow these steps to review call information for the Caller
ID records (up to 10) your System 60 can store.
1. Press REVIEW s or t, or READ. The system displays XX
TOTAL(for example, 02TOTAL) to show the number
of stored call records, and the NEW CALL indicator
stops flashing.
2. Repeatedly press REVIEW s or t to see the individual
call records. The system displays the caller record
number, then the name.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 18 Monday, August 16, 1999 3:56 PM
3. To see the entire record (name, phone number, date
and time), repeatedly press READ.
4. To see call information for the previous or the next call,
press REVIEW s or t.
Notes:
• -END- appears after the last call record.
• The system automatically returns to the current date
and time about 20 seconds after you press any button.
DISPLAY MESSAGES
Your Caller ID System 60 is designed to display additional
information about the incoming call. All information is dis-
played in the language you selected when you installed the
batteries. This table shows a brief description of the mes-
sage and how it appears in each language.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 19 Monday, August 16, 1999 3:56 PM
Description
English
Spanish
French
Blocked Name: Caller
Does Not Allow Name
To Be Sent
BLOCKED
NAME
NOMB SIN
ACCESO
NOM
BLOQUE
Blocked Number:
Caller Does Not Allow
Number To Be Sent
BLOCKED
NUMBER
NUM SIN
ACCESO
NUMERO
BLOQUE
No Caller ID Name
Available (sending
system does not have
that information)
NO CID
NAME
NO CID
NOMBRE
NOM N/D
No Caller ID Number
Available (sending
system does not have
that information)
NO CID
NUMBER
NO CID
NUMERO
NUMERO
N/D
Received More Than
One Call From The
Same Phone Number
REPEAT
CALL
NUMERO
REPETIDO
APPEL
REPETE
19
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 20 Monday, August 16, 1999 3:56 PM
Description
English
Spanish
French
Message Waiting At
The Phone Company
MESSAGE
WAITING
MENSAJE
ESPERA
MESSAGE
ATTEND
Batteries Are Low
BATTERIES
LOW
BATERIAS
DESCARGADO
BATTERIES
FAIBLES
Error
ERROR
ERROR
ERREUR
20
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 21 Monday, August 16, 1999 3:56 PM
Message Waiting
If you subscribe to your phone company’s message waiting
service, your Caller ID System 60 can inform you when the
phone company has messages waiting. When the phone
company sends a message flag to your phone line, the sys-
tem displays MESSAGEWAITINGand the NEW CALL indi-
cator flashes.
Note: If a message waiting indication comes in while you
are on a phone call, the MESSAGEWAITINGdisplay does
not appear until the next time you receive a call.
The system’s display alternates between MESSAGE
WAITING and the incoming call information. The system
continues to display MESSAGE WAITING and the NEW
CALL indicator keeps flashing until you retrieve the mes-
sage from the phone company.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 22 Monday, August 16, 1999 3:56 PM
Transmission Errors
Your Caller ID System 60 displays ERRORto inform you of
an error during the transmission of Caller ID information. A
_ appears in the displayed information where the data is
lost.
Example: The “i” in Smith was lost during transmission.
Note: It is normal for this to happen occasionally. If this hap-
pens often, contact your phone company.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 23 Monday, August 16, 1999 3:56 PM
DELETING CALL INFORMATION
You can select and delete individual call records or all call
records.
Follow these steps to delete a single call record.
1. Press REVIEW s or t until the call record you want to
delete appears.
2. Press and hold down READ until the call information
disappears (about 2 seconds).
Once you delete the call information, you cannot retrieve it.
The display shows the next call or, if no other calls are
stored, the current date and time appear.
Follow these steps to delete all call records.
1. Press either REVIEW s or t until -END-appears.
2. Press and hold down READ until -END- disappears
(about 2 seconds). All records are deleted, and the dis-
play shows the current date and time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 24 Monday, August 16, 1999 3:56 PM
CARE AND MAINTENANCE
Your RadioShack Caller ID System 60 is an example of su-
perior design and craftsmanship. The following suggestions
will help you care for the system so you can enjoy it for
years.
• Keep the system dry. If it gets wet, wipe it dry immedi-
ately. Liquids might contain minerals that can corrode
the electronic circuits.
• Handle the system gently and carefully. Dropping it can
damage circuit boards and cases and can cause it to
work improperly.
• Use and store the system only in normal temperature
environments. Temperature extremes can shorten the
life of electronic devices and distort or melt plastic
parts.
• Keep the system away from dust and dirt, which can
cause premature wear of parts.
• Wipe the system with a damp cloth occasionally to
keep it looking new. Do not use harsh chemicals, clean-
ing solvents, or strong detergents to clean the system.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 25 Monday, August 16, 1999 3:56 PM
Modifying or tampering with the Caller ID System 60’s inter-
nal components can cause a malfunction and might invali-
date your system’s warranty and void your FCC
authorization to operate it. If your Caller ID System 60 is not
performing as it should, take it to your local RadioShack
store for assistance. If the trouble is affecting the telephone
lines, the phone company might ask you to disconnect your
system until you resolve the problem.
THE FCC WANTS YOU TO KNOW
In the unlikely event that your system causes problems on
the telephone line, the telephone company can disconnect
your service. The telephone company attempts to notify you
in advance. If advance notice is not practical, the telephone
company notifies you as soon as possible and advises you
of your right to file a complaint with the FCC.
Also, the telephone company can make changes to its lines,
equipment, operations, or procedures that could affect the
operation of this system. The telephone company notifies
25
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 26 Monday, August 16, 1999 3:56 PM
you of these changes in advance so you can take the nec-
essary steps to prevent interruption of your telephone ser-
vice.
Your system complies with the limits for a Class B digital de-
vice as specified in Part 15 of FCC Rules. These limits pro-
vide reasonable protection against radio and TV
interference in a residential area. However, your system
might cause TV or radio interference even when it is operat-
ing properly. To eliminate interference, you can try one or
more of the following corrective measures:
• Reorient or relocate the receiving radio or TV antenna.
• Increase the distance between the system and the
radio or TV.
• Use outlets on different electrical circuits for the system
and the radio or TV.
Consult your local telephone company or RadioShack store
if the problem continues.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 27 Monday, August 16, 1999 3:56 PM
LIGHTNING
Your System 60 has built-in protection circuits to reduce the
risk of damage from surges in telephone and power line cur-
rent. These protection circuits meet or exceed the FCC re-
quirements. However, lightning striking the telephone or
power lines can damage your system.
Lightning damage is not common. Nevertheless, if you live
in an area that has severe electrical storms, we suggest that
you unplug your system during the storms to reduce the
possibility of damage.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
43-968.fm Page 28 Monday, August 16, 1999 3:56 PM
RadioShack Limited Warranty
This telephone product is warranted against manufacturing defects in mate-
rial and workmanship for one (1) year from the date of purchase from
RadioShack company owned stores and authorized RadioShack franchisees
and dealers. Within this period bring your RadioShack sales slip as proof-
of-purchase date to any RadioShack store.
This warranty does not cover damage or failure caused by or attributable to
Acts of God, abuse, misuse, improper or abnormal usage, faulty installation,
improper maintenance, lightning or other incidence of excess voltage, or any
repairs other than those provided by a RadioShack Authorized Service Facil-
ity, or transportation costs. RadioShack is not responsible or liable for
indirect, special, or consequential damages arising out of or in connec-
tion with the use or performance of the product or other damages with
respect to loss of property, loss of revenue or profit, or costs of
removal, installation or reinstallation.
EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS
WARRANTIES AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURA-
TION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. Some states do not allow the limitation or exclusion of
incidental or consequential damages and some states do not allow limitation
or exclusion of implied warranties; therefore, the aforesaid limitation(s) or
exclusion(s) may not apply to the purchaser. There will be charges rendered
for repairs to the product made after the expiration of the aforesaid one (1)
year warranty period.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state.
We Service What We Sell
10/95
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
4A6
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|