Sanyo DVD VCR Combo SCP 2700 User Guide

INSTRUCTION MANUAL

DVC-2700

English

DVD Player + Video Cassette Recorder

Lecteur DVD + Magnétoscope à cassette

Français

Only cassettes marked

can be used with this DVD+VCR.

As an ENERGY STAR^®Partner,

SANYO has determined that

this product or product model

meets the ENERGY STAR^®

guidelines for energy efficiency.

Please read this manual carefully before connecting your DVD+VCR and operating it for the first time.

Keep the manual in a safe place for future reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.

AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in electric

shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-

dures for installation, use, and servicing.

This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions. - All these safety and oper-

ating instructions should be read before the product is

operated.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the product.

2. Keep these instructions. - The safety, operating and

use instructions should be retained for future refer-

ence.

11. Only use attachments/accessories specified by

the manufacturer.

3. Heed all warnings. - All warnings on the product and

in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use

instructions should be followed.

5. Do not use this product near water. – For example:

near a bath tub, wash bowl, kitchen sink, laundry tub,

in a wet basement; or near a swimming pool; and

other areas located near water.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

apparatus. When a cart is used, use caution

when moving the cart/product combination to

avoid injury from tip-over.

6. Clean only with dry cloth. – Unplug this product from

the wall outlet before cleaning. Do not use liquid

cleaners.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. -

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over- heating. The open-

ings should never be blocked by placing the product

on a bed, sofa, rug or other similar surface. This prod-

uct should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is pro-

vided or the manufacturer’s instructions have been

adhered to.

13. Unplug this product during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the product has been

damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or

objects have fallen into the product, the product

has been exposed to rain or moisture, does not

operate normally, or has been dropped.

8. Do not install near any heat sources such as radi-

ators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are pro-

vided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Operation with DVD . . . . . . . . . . . . . . . . . . . . . 27-29

Playing DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

General Features. . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 27

ꢀ Moving to another CHAPTER. . . . . . . . . . . . 27

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Still Picture and Frame-by-Frame Playback . 28

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Marker Search . . . . . . . . . . . . . . . . . . . . . . . 29

Special DVD Features . . . . . . . . . . . . . . . . . . . . 29

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Display Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Preparation

ꢀ

Checking the contents of DVD Video discs: Menus . 29

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13

Connecting Antenna/Cable TV to DVD+VCR . . . 11

Basic TV Connections . . . . . . . . . . . . . . . . . . . . 12

Optional, Preferred TV Connections . . . . . . . 12-13

Before Operation - VCR Part . . . . . . . . . . . . . . 14-16

On-Screen Display(OSD) . . . . . . . . . . . . . . . . . . 14

Setting the On-Screen Display . . . . . . . . . . . . . . 14

Setting the VCR Setup Menu . . . . . . . . . . . . . . . 15

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . 15

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . 16

Before Operation - DVD Part . . . . . . . . . . . . . . 17-20

General Explanation. . . . . . . . . . . . . . . . . . . . . . 17

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 17

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 18-20

ꢀ Initial Settings General Operation. . . . . . . . . 18

ꢀ LANGUAGE. . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ AUDIO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Changing the Audio Language . . . . . . . . . . . 29

ꢀ Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Operation with Audio CD and MP3 Discs . . . . 30-31

Playing an Audio CD and MP3 Discs . . . . . . . . . 30

Notes on MP3 Recordings . . . . . . . . . . . . . . . . . 30

ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ꢀ Moving to another Track . . . . . . . . . . . . . . . 31

ꢀ Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 31

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 31

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 32

Programmed Playback with Audio CD

and MP3 Discs . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 32

ꢀ Erasing a Track from Program List. . . . . . . . 32

ꢀ Erasing the Complete Program List . . . . . . . 32

Operation

Reference

Operation with tape . . . . . . . . . . . . . . . . . . . . . 21-26

Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . 21

Special Effect Playbacks . . . . . . . . . . . . . . . . . . 21

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Still Picture and Frame-by-Frame Playback . 21

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Ad JUMP (Advertisement Jump). . . . . . . . . . 21

Normal Recording . . . . . . . . . . . . . . . . . . . . . . . 22

Timer Recording . . . . . . . . . . . . . . . . . . . . . . 22-23

Instant Timer Recording . . . . . . . . . . . . . . . . . . . 24

Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . 24

Copying from DVD to VCR. . . . . . . . . . . . . . . . . 24

VHS Hi-Fi Stereo System/MTS Broadcast . . . . . 25

Tape Counter Memory Feature. . . . . . . . . . . . . . 26

Additional Information . . . . . . . . . . . . . . . . . . . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 33-34

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 35

Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 36

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Playable Discs

Title (DVD only)

The main film content or accompanying feature content

or music album.

DVD

(8 cm/12 cm disc)

Each title is assigned a title reference number enabling

you to locate it easily.

Audio CD

(8 cm/12 cm disc)

Chapter (DVD only)

In addition, this unit can play a CD-R or CD-RW that

contains audio titles or MP3 files.

Sections of a picture or a musical piece that are smaller

than titles. A title is composed of one or several chap-

ters. Each chapter is assigned a chapter number to

enable you to locate the chapter you want. Depending

on the disc, chapters may not be recorded.

Notes

– Depending on the conditions of the recording equip-

ment or the CD-R/RW disc itself, some CD-R/RW

discs cannot be played on the unit.

– The unit cannot play discs that contain data other

than MP3 and CD-DA data.

– Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

– Do not use irregularly shaped CDs (e.g., heart-

shaped or octagonal). It may result in malfunctions.

Track (audio CD only)

Sections of a musical piece on an audio CD. Each track

is assigned a track number, enabling you to locate the

track you want.

Remote control battery installation

Detach the battery cover on the rear of the

remote control, and insert two R03 (size

Notes on DVDs

AAA) batteries with

correctly.

and

aligned

Some playback operations of DVDs may be intention

ally fixed by software manufacturers. As this unit plays

DVDs according to disc content designed by the soft-

ware manufacturer, some playback features of the unit

may not be available or other functions may be added.

Refer also to the instructions supplied with the DVDs.

Some DVDs made for business purposes may not be

played on the unit.

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Remote Control Operation Range

Point the remote control at the remote sensor and press

the buttons.

^ꢀDistance: About 23 ft (7 m) from the front of the

remote sensor

^ꢀAngle: About 30° in each direction of the front of the

remote sensor

Regional code of the DVD+VCR and DVDs

This DVD+VCR is designed and manufactured

for playback of region 1 encoded DVD software.

The region code on the labels of some DVD discs indi-

cates which type of DVD+VCR can play those discs. This

unit can play only DVD discs labeled 1 or ALL. If you try

to play any other discs, the message “Check Regional

Code” will appear on the TV screen. Some DVD discs

may not have a region code label even though their play-

back is prohibited by area limits.

IMPORTANT NOTE:

SPENT OR DISCHARGED BATTERIES MUST BE

RECYCLED OR DISPOSED OF IN A SAFE MANNER

IN COMPLIANCE WITH ALL APPLICABLE LAWS.

FOR DETAILED INFORMATION, CONTACT YOUR

LOCAL COUNTY SOLID WASTE AUTHORITY.

Note on DTS-encoded CDs

When playing DTS-encoded CDs, excessive noise may

be exhibited from the analog stereo output. To avoid

possible damage to the audio system, turn down the

volume before playing back such discs, adjust the vol-

ume gradually, and keep the volume level low. To enjoy

DTS Digital Surround^TMplayback, an external 5.1 chan-

nel Digital Surround^TMdecoder system must be connect-

ed to the digital output of the unit.

Manufactured under license from Dolby Laboratories. Dolby

and the double-D symbol are trademarks of Dolby

Laboratories. Confidential unpublished works. Copyright

DTS and DTS Digital Out are trademarks of Digital Theater

Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Continued)

Precautions

Cleaning discs

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

Handling the unit

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packaged at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. In this case, position

the unit away from the TV, VCR, or radio, or turn off the

unit after removing the disc.

Yes

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

About Symbols

Cleaning the unit

About the

symbol display

To clean the cabinet

“

” may appear on the TV screen during operation.

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

This icon means the function explained in this owner’s

manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbols are

applicable only to those discs represented by the symbol.

To obtain a clear picture

The DVD+VCR is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn, the picture quality will be poor.

DVD DVDs

Audio CDs.

MP3 MP3 Discs.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

Setting the Output Source

For details, please contact your nearest dealer.

You must select one of your output sources (DVD or

VCR) to view on the TV screen.

Notes on Discs

• If you want to view output source of DVD deck:

Press DVD on the remote or DVD/VCR on the front panel

until DVD indicator in the display window lights and output

source of DVD deck is viewed on the TV screen.

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

• If you want to view output source of VCR deck:

Press VCR on the remote or DVD/VCR on the front panel

until VCR indicator in the display window lights and output

source of VCR deck is viewed on the TV screen.

Do not stick paper or tape on the disc.

Note

• If you insert a disc while the DVD+VCR is in the VCR

mode, the DVD+VCR will switch to DVD mode

automatically.

Storing discs

• If you insert a cassette tape without an erasure

prevention tab intact while the DVD+VCR is in the

DVD mode, the DVD+VCR will switch to VCR mode

automatically.

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

Disc Tray (DVD deck)

Insert a disc here.

EJECT(Z)

Ejects the tape in the VCR deck.

CHANNEL (v/V)

To scan up or down through memorized channels.

Cassette Compartment (VCR deck)

Insert a video cassette here.

Remote Sensor

Point the DVD+VCR remote control here.

Display window

Shows the current status of the DVD+VCR.

OPEN/CLOSE (Z)

Opens or closes the disc tray.

PLAY (B)

Starts playback of a tape in

the VCR deck.

DVD/VCR indicator

Indicates the active deck.

STOP (x)

Stops playback of disc.

STOP ( )

Stops playback of tape.

REC (z)

PLAY (B)

To record normally or to activate

Instant Timer Recording.

Starts playback of a disc

in the DVD deck.

AV INPUT (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an

external source (Audio system,

TV/Monitor, Another VCR).

PAUSE/STILL(X)

Pause playback of a disc in the DVD

deck temporarily/press repeatedly

for frame-by-frame playback.

DVD/VCR (output select)

Child Lock

Select one of your output sources to

view on the TV screen between DVD

and VCR.

The control buttons on the front panel of the DVD+VCR

can be switched off so that your DVD+VCR can only be

operated using the remote control.

POWER

Switches the DVD+VCR ON and OFF.

Press SAFE on the remote control to enable LOCK func-

tion,

appears in the display window.

SAFE

To disable the LOCK function, press SAFE on the remote

control until appears in the display window.

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Window

The DVD deck is selected.

A disc is in the DVD deck.

(Lights when a disc is in the DVD deck

and Flashes when no disc.)

Indicates repeat mode.

DVD to VCR copy is in progress.

DVD+VCR is in timer recording or a timer

recording is programmed.(VCR part only)

A cassette is in the VCR deck.

The VCR deck is selected.

DVD

COPY

VCR

REC

Lights when TV mode is active (See page 22.)

Indicates PM time. (AM is not displayed.)

DVD+VCR is Recording.

(VCR part only)

Indicates total playing time, elapsed time, remaining time or

current deck status (Playback, Pause, etc).

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

DVD/VCR select button

Select the output source (DVD or VCR)

to view on the TV screen.

OPEN/CLOSE, EJECT (Z)

- Opens and closes the disc tray.

- Ejects the tape in the VCR deck.

POWER

Switches DVD+VCR ON and OFF.

SELECT/ENTER

- Acknowledges menu selection.

- Displays functions on the TV screen.

TV/VCR

To view channels selected by the VCR

tuner or by the TV tuner.

This button is not available.

DISC MENU

Accesses menu on a DVD disc.

DISPLAY, CLK/CNT

Accesses On-Screen display.

Switches among the clock, tape counter

and tape remaining modes on the display.

INPUT

To select the VCR deck’s source (Tuner,

LINE 1, or LINE 2).

b/B/v/V (left/right/up/down)

- Selects an option in the menu

^ꢀFORWARD (>)

DVD; Search forward*/go to next chap-

ter or track.

VCR; Advances the tape during the

STOP mode or for fast forward picture

search.

CH/TRK (v/V): Selects channel of VCR.

Adjusts manually the tape’s picture

onscreen.

SETUP, MENU

Accesses or removes DVD setup menu

and VCR menu.

^ꢀPLAY (H)

Starts playback.

TITLE ^ꢀ

Displays the disc’s Title menu, if

available.

^ꢀBACKWARD (.)

DVD; Search backward*/go to beginning

of current chapter or track or go to previ-

ous chapter or track.

VCR; Rewinds the tape during the

STOP mode or for fast reverse picture

search.

PAUSE/STEP (X) ^ꢀ

Pause playback or recording

temporarily/press repeatedly for frame-

by-frame playback.

* Press and hold button for about two

seconds.

STOP (x) ^ꢀ

Stops playback.

PROGRAM

Accesses or removes Program menu.

REC (z) ^ꢀ

Records normally or activates Instant

Timer Recording.

CLEAR

Removes a track number on the

program menu or a mark on the

MARKER SEARCH menu.

0-9 numerical buttons

Selects numbered options in a menu.

AUDIO ^ꢀ

Selects an audio language (DVD) or an

audio channel (CD).

^ꢀSAFE

Switch the Lock function on and off.

^ꢀANGLE

Selects a DVD camera angle if

available.

SUBTITLE ^ꢀ

Selects a subtitle language.

MARKER ^ꢀ

Marks any point during playback.

^ꢀRETURN

Removes the setup menu.

SEARCH ^ꢀ

Displays MARKER SEARCH menu.

^ꢀZOOM

Enlarges DVD video image.

REPEAT ^ꢀ

Repeat chapter, track, title, all.

RANDOM, Ad JUMP ^ꢀ

- Plays tracks in random order.

- Fast forwards picture search through

30 seconds of recording.

Note

This remote control use the same buttons for VCR and DVD

functions (ex. PLAY).

When using a VCR, first press the VCR button.

When using a DVD, first press the DVD button.

A-B, SP/SLP ^ꢀ

- Repeats sequence.

- Selects recording speed

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))

Connect to a TV with video and audio inputs.

COMPONENT/PROGRESSIVE SCAN

VIDEO OUT (Y Pb Pr) (DVD OUT)

Connect to a TV with Y Pb Pr inputs.

VCR IN LINE 1

(VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external

source (Audio system, TV/Monitor,

Another VCR).

AUDIO OUT (Left/Right) (DVD OUT)

Connect to a TV, amplifier, receiver, or stereo system.

S-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV.

AC Power Cord

Plug into the power source.

DIGITAL AUDIO OUT (COAXIAL) (DVD OUT)

Connect to digital (coaxial) audio equipment.

RF. OUT(DVD/VCR OUT)

Connect to a TV with RF coaxial inputs.

ANT.IN(ANTENNA INPUT)

Connect the VHF/UHF/CATV antenna to this terminal.

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Without Cable Box

Tips

If your cable wire is connected to your TV without a converter

or descrambler box, unscrew the wire from your TV and attach

it to the ANT.IN jack on the DVD+VCR. Use the supplied round

coaxial cable to connect between the DVD+VCR’s RF.OUT

jack and the 75 ohm antenna input jack on the TV. With this

connection, you can receive all midband, super band, and

hyperband channels.

ꢀ

Depending on your TV and other equipment you wish to

connect, there are various ways you could connect the

DVD+VCR. Use connections described on pages 11-13.

Please refer to the manuals of your TV, VCR, Stereo

System or other devices as necessary to make the best

connections.

For better sound reproduction, connect the DVD+VCR’s

DVD/VCR AUDIO OUT jacks to the audio in jacks of your

amplifier, receiver, stereo or audio/video equipment. See

Optional, Preferred TV Connections on pages 12-13.

With Cable Box

If a converter is required in your cable system, follow the

instruction below:

The cable hookup permits both TV and DVD+VCR operation.

Caution

To view or record CATV channel

ꢀ

Make sure the DVD+VCR is connected directly to the TV.

Tune the TV to the correct video input channel.

Do not connect the DVD+VCR’s DVD/VCR AUDIO OUT

jacks to the phono in jack (record deck) of your audio

system.

1 Tune the TV to the DVD+VCR output channel (CH 3 or 4).

2 Set the DVD+VCR channel selector to the output channel of

the Cable Converter box by pressing the CH/TRK (v/V) or

number (0-9) of your DVD+VCR. (Example: CH3)

3 Select the channel to view at the Cable Converter Box.

ꢀ

Do not connect your DVD+VCR via your VCR. The DVD

image could be distorted by the copy protection system.

Notes

ꢀ With this connection, you CANNOT record one program

while viewing another.

ꢀ If you are using a cable box to tune channels, it is not nec-

essary to do Auto Channel Programming as indicated on

page 15.

Connecting Antenna/Cable TV to

DVD+VCR

Disconnect the antenna leads from the rear of the

TV.

Cable TV

Wall Jack

Identify the type of cable from your antenna. If it is

2 _{a round cable as illustrated, it is a 75 ohm coaxial}

antenna cable. This cable will connect directly to

the jack marked ANT.IN on your DVD+VCR.

Back Panel of

Typical Cable Box

Tip

If your antenna lead wire is a flat type antenna cable,

connect it to a Antenna Adaptor (300-ohm to 75-ohm)

(not supplied) and slip the Adaptor onto the ANT.IN

jack. The Adaptor does not screw on to the DVD+VCR,

it just slips over the jack.

Antenna

Cable TV

Wall Jack

Flat Wire

(300 ohm)

Rear of DVD+VCR

300/75 ohm

Adaptor

(Not supplied)

Rear of DVD+VCR

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Basic TV Connections

Optional, Preferred TV Connections

ꢀ

Make one of the following connections, depending on

the capabilities of your existing equipment.

Note

You can ONLY watch and listen to DVD playback

through the connections shown below.

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the

antenna in jack on the TV using the 75-ohm Coaxial

Cable supplied (R).

S-Video connection

Connect the S-VIDEO OUT jack on the DVD+VCR

to the S-Video in jack on the TV using the optional

S-Video cable (S).

Connect the Left and Right AUDIO OUT jacks of

2 _{the DVD+VCR to the audio left/right in jacks on the}

TV using the supplied audio cables (A2).

Note

If you use this connection, tune the TV to the

DVD+VCR’s RF output channel (CH 3 or 4).

Component Video (Color Stream^®) / Progressive

Scan (ColorStream^®pro) connection

How to set the DVD+VCR’s RF output channel

1.When the DVD+VCR is turned off, press and hold

CHANNEL (v/V) on the front panel for about five

seconds.

It will turn itself on and “RF03” or “RF04” appears in the dis-

play window.

ꢀ If your television is a high-definition or “digital ready”

television, you may take advantage of the

DVD+VCR’s progressive scan output for the highest

video resolution possible.

ꢀ If your TV does not accept the Progressive Scan for-

mat, the picture will appear scrambled if you try

Progressive Scan on the DVD+VCR.

2.Press CHANNEL (v/V) on the front panel or CH/TRK

(v/V) on the remote control to change the RF output

channel (CH 03 or CH 04).

3.Turn off the DVD+VCR.

Connect the COMPONENT / PROGRESSIVE

SCAN VIDEO OUT jacks on the DVD+VCR to the

corresponding in jacks on the TV using an optional

Y Pb Pr cable (C).

Audio/Video connection

Connect the DVD/VCR VIDEO OUT jack on the

DVD+VCR to the video in jack on the TV using the

video cable supplied (V).

Connect the Left and Right AUDIO OUT jacks of

2 _{the DVD+VCR to the audio left/right in jacks on the}

TV (A2) using the supplied audio cables.

Connect the Left and Right DVD/VCR AUDIO OUT

2 _{jacks on the DVD+VCR to the audio left/right in}

jacks on the TV (A1) using the supplied audio

cables.

Notes

– Set the Progressive Scan to “On” on the setup menu

for progressive scan signal, see page 18.

– When you use Component Video signal, set the

Progressive Scan to “Off” on the setup menu.

– Progressive scan does not work with the analog video

connections (yellow VIDEO OUT jack).

Note

If you use this connection, set the TV’s source selector

to VIDEO.

Rear of TV

ANTENNA

INPUT

VIDEO

INPUT

S-VIDEO

INPUT

COMPONENT PROGRESSIVE SCAN

AUDIO INPUT

VIDEO INPUT

Rear of DVD+VCR

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Rear of DVD+VCR

Optional, Preferred TV Connections

(Continued)

Note

You can ONLY listen to DVD playback using COAXIAL

(X) and AUDIO OUT (A2) connections. The tuner and

VCR will still be heard through the RF.OUT (R) or

DVD/VCR AUDIO OUT (A1) jacks. (See page 12.)

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR

AUDIO OUT) jacks on the DVD+VCR to the audio left

and right in jacks on your amplifier, receiver, or stereo

system using the audio cables (A1, A2) supplied.

COAXIAL

DIGITAL INPUT

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/Video

receiver equipped with a multi-channel decoder

(Dolby Digital™, MPEG 2, or DTS)

AUDIO INPUT

Amplifier (Receiver)

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VCR IN LINE 1 or AV INPUT jacks on the

DVD+VCR to the audio/video out jacks on your

accessory component, using the optional audio/video

cables.

Connect one of the DVD+VCR’s DIGITAL AUDIO

OUT jacks (COAXIAL X) to the corresponding in

jack on your amplifier. Use an optional digital

(coaxial X) audio cable.

You will need to activate the DVD+VCR’s digital

2 _{output. (See “AUDIO” on page 19).}

Accessory Component:

VCR, Camcorder,

Video Camera,

Satellite Receiver,

Laser Disc Player

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD+VCR (MPEG 2,

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver.

Jack panel of Accessory

AUDIO

OUTPUT

Caution:

VIDEO

OUTPUT

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

Notes

–

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– Six Channel Digital Surround Sound via digital

connection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder.

– To see the audio format of the current DVD in the

on-screen display, press AUDIO.

Rear of DVD+VCR

Front of DVD+VCR

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR Part

On-Screen Display (OSD)

Some of these functions will be displayed every time the

VCR is operated.

EASY INFORMATION

If the Extended Data Service (XDS) signals are provided

along with normal TV signal in your area or during play-

back of a tape recorded with Extended Data Service

(XDS) signals, the station ID, program title and program

details are shown in the TV screen.

❶

❷

❸

❹

❺

When viewing a channel with Extended Data Service (XDS)

signals, press SELECT/ENTER then the station ID will

appear on the TV screen. Press SELECT/ENTER again

and the program details will appear on the TV screen.

When viewing a tape recorded with Extended Data

Service (XDS) signals, press SELECT/ENTER twice

then the program title and program details will appear

on the TV screen.

PLAY

HI-FI

CH 4

STEREO

JUL 5 , SAT

2:15 PM

❻

❼

PROGRAM DETAILS

❶ TAPE SPEED DISPLAY

Shows the current tape speed.

❷ FUNCTION DISPLAY

LENGTH: Indicates the run length of a program.

TIME REMAINING: Indicates the remaining time of a

program.

RATING: Indicates the rating of the current program

(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The

rating N/A means that the motion picture ratings are not

applicable to this program.

Indicates the function in progress.

❸ HI-FI DISPLAY

Indicates when this unit is playing back tape recorded with

Hi-Fi.

❹ CHANNEL DISPLAY

CH 4

WABC STEREO

PROGRAM DETAILS

“Home video”

ndicates the selected channel (or LINE1, LINE2).

❺ STEREO/SAP DISPLAY (MONO is not displayed)

Shows the type of audio signal received by the VCR tuner.

❻ DATE DISPLAY

Shows the current date. (Month/Date/Day of the week

format)

LENGTH 01:00

TIME REMAINING 00:26

RATING N/A

“Home video”

JUL 5 , SAT

2:15 PM

Easy Information Screen

(Station ID)

Easy Information Screen

(Program details)

❼ CLOCK/COUNT/REMAIN DISPLAY

Shows the current time, the tape counter and remaining time

on the tape.

Setting the On-Screen Display

The SETUP, clock setting, and timer recordings are

accessed conveniently with On-Screen Menu Displays

that lead you through each step. The following pages

describe the On-screen selections to be set.

Each press of the SELECT/ENTER changes the TV

screen in the following sequence.

STOP

STEREO

Menu Selection

Your VCR allows remote control adjustment of several

features.

Press MENU and the MAIN menu will appear.

JUL 5 , SAT

2:15 PM

0:35:40

REM 1:58

Select the desired menu with v/V button and

2 _{then press SELECT/ENTER.}

Note

Menus remain on-screen for 3 minutes.

Notes

ꢀ The function displays can be seen displayed on the TV

screen for 5 seconds.

MAIN MENU

ꢀ The clock (or tape counter, tape remaining) mode will contin-

ue until you press SELECT/ENTER.

CLOCK SET (page 16)

PROGRAM (page 22)

TUNING (page 15)

SETUP (page 15)

ꢀ The tape counter and the remaining tape length indicator

appear only when a cassette is inserted. Also, the remaining

tape length indicator appears after any tape operation.

Press MENU when finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR Part (Continued)

Setting the VCR Setup Menu

Channel Selection

This DVD+VCR is equipped with a frequency

synthesized tuner capable of receiving up to 181

channels. These include VHF channels 2-13, UHF

channels 14-69 and CATV channels 1-125.

Press MENU and the MAIN menu will appear.

Press v/V to select the SETUP menu, then

2 _{press SELECT/ENTER.}

Preparation:

ꢀ Connect the DVD+VCR to the desired type of antenna or

The SETUP menu will appear.

cable TV system, as shown in Connecting Antenna/Cable TV

to DVD+VCR on page 11.

AUTO CHANNEL PROGRAMMING

Press MENU and the MAIN menu will appear.

Press v/V to choose a desired option on the

3 _{SETUP menu. Then press b/B to choose a}

desired setting.

Press v/V to select the TUNING menu, then

2 _{press SELECT/ENTER.}

The TUNING menu will appear.

FUNCTION OSD

The on-screen display of this DVD+VCR can be turned on or off.

ꢀ FUNCTION OSD can be switched between ON and OFF by

pressing b/B.

LANGUAGE SELECT

The on-screen programming of this DVD+VCR can be

displayed in either English, Spanish, or French.

ꢀ LANGUAGE SELECT can be switched among ENGLISH,

SPANISH and FRENCH by pressing b/B.

Press V to choose the SOURCE SELECT option,

AUDIO MODE

3 _{then press b/B to select TUNER.}

The DVD+VCR has two separate audio playback systems, the

high quality VHS Hi-Fi system and standard NORMAL mono

system. The same audio is generally recorded on both

systems. The VHS Hi-Fi system plays on separate (left and

right) channels, and the NORMAL system plays monaural

sound. The normal track is always played so the cassette can

be played on a DVD+VCR that does not have VHS Hi-Fi.

ꢀ AUDIO MODE can be switched between HI-FI and

NORMAL by pressing b/B.

Press b/B repeatedly to switch among TUNER, LINE1

and LINE2.

Press v/V to choose the AUTO CHANNEL SET

4 _{option, then press b/B to set the channel.}

The tuner will automatically cycle through all

available channels in the area and place them in

the tuner’s memory.

After the AUTO CHANNEL SET PROCEEDING is

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or

Second Audio Program (SAP) bilingual signals. Set this display to

the desired position when both MTS stereo and SAP signals are

received. When only one of the MTS signal is received, the

DVD+VCR automatically selects the corresponding receiving

mode (Stereo or SAP) regardless of the selected position. For

normal operation, the display should be in the STEREO position.

The DVD+VCR will then record a STEREO program when available,

and record a mono program IF the program is NOT IN STEREO.

For weak STEREO and/or SAP broadcasts, changing the dis-

play to mono may give clearer sound.

5 _{complete, make sure the TUNING BAND is set}

appropriately (TV or CATV) by pressing v/V and

choosing the correct TUNING BAND (TV or

CATV) by pressing b/B using the TUNING

menu.

Remember, TV is for the air antenna reception,

CATV is for cable or wireless cable connection.

Press MENU to return to the TV screen.

ꢀ BROADCAST TYPE can be switched among STEREO, SAP,

and MONO by pressing b/B.

Use CH/TRK (v/V) or CHANNEL (v/V) on the

front panel to cycle the DVD+VCR through the

channels in memory.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is

in HI-FI position] for selecting the audio output signals from the

AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi-

tion, so that when a stereo tape is played, the stereo sound will

be heard through the left and right channels. If a mono tape is

played and the audio output is set to stereo, the same mono

sound will be heard from both left and right channels.

ꢀ AUDIO OUTPUT can be switched among STEREO, LEFT,

and RIGHT by pressing b/B.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from

memory manually.

Press V to choose the CH. ADD/DEL option on the

TUNING menu. Press b/B to select a channel to

add or erase.

Press SELECT/ENTER to add or erase the channel.

Repeat steps 1 and 2 to add or erase channels.

Press MENU when finished.

Press MENU to return to the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR Part (Continued)

Setting the Clock

Note

There are cases where the TV station does not send or sends

wrong date and/or time information and the DVD+VCR sets the

incorrect time.

If this happens we recommend that you set the clock manually.

The DVD+VCR gives you two ways to set the time and

date: the Auto Clock Feature or manually. The Auto

Clock Feature enables the DVD+VCR to set up the clock

when the DVD+VCR is turned off.

Manual Clock Set

Things to know before starting

The clock uses the 12-hour system. (Be sure to set AM

ꢀ

Example: JULY 5, 2003 ; 2:15 AM

and PM correctly.)

ꢀ

The initial Clock Setting is JANUARY 1, 2003, 12:00 AM.

Press MENU and the MAIN menu will appear.

Auto Clock Set

Press v/V to choose the CLOCK menu.

2 _{Press SELECT/ENTER and the CLOCK menu}

will appear.

The Auto Clock Set feature is set to ON at the factory. In the

ON setting, the DVD+VCR looks for a channel carrying XDS

(Extended Data Services) information. XDS updates the clock

using the Coordinated Universal Time.

The Auto Clock Feature enables the DVD+VCR to set up

the clock when the DVD+VCR is turned off.

Press MENU and the MAIN menu will appear.

Press v/V to choose the CLOCK menu.

2 _{Press SELECT/ENTER and the CLOCK menu}

will appear.

Press b/B to choose the month.

Press V to choose the DAY option.

4 _{Use b/B to choose the day.}

The day of the week will display automatically.

Press V to choose the YEAR option.

5 _{Use b/B to choose the year.}

Press V to choose the TIME option.

6 _{Use b/B to choose the time.}

Press V to choose the AUTO CLOCK SET option.

3 _{Press b/B to choose ON.}

Press E to choose the DAYLIGHT SAVINGS

item.

The Auto Clock Set feature is set to ON at the factory. In

the ON setting, the DVD+VCR looks for a channel

carrying XDS (Extended Data Services) information. XDS

updates the clock using the Coordinated Universal Time.

Press F or G to choose AUTO, ON or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR sets the clock when the

Daylight Saving Time is started and ended.

Press E to choose the DAYLIGHT SAVINGS

4 _item.

Press F or G to choose AUTO, ON or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR sets the clock when the

Daylight Saving Time is started and ended.

Press E to choose the TIME ZONE item.

5 _{Press F or G to choose the correct time zone}

(AUTO, EASTERN, CENTRAL, MOUNTAIN,

Press MENU when finished.

PACIFIC, ALASKA or HAWAII).

If “AUTO” is selected as the time zone, the VCR sets the

clock using the first Coordinated Universal Time informa-

tion it finds in a broadcast signal.

Note

If setting the clock manually, “AUTO CLOCK SET” must

set to “OFF”.

If set to “ON”, an incorrect date and/or time will be

entered again when the DVD+VCR is turned off.

Press MENU when finished.

Turn off the DVD+VCR and the auto clock

setting works.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD Part

Use b/B to change the setting of an item.

3 _{The number buttons can be also be used for setting}

numbers (e.g., title number). For some functions,

press SELECT/ENTER to execute the setting.

Caution:

Before using the remote control, press the DVD button

to select the device to be operated.

Temporary Feedback Field Icons

General Explanation

Title

Repeat Title (DVD)

This manual gives basic instructions for operating the

DVD+VCR. Some DVDs require specific operation or

allow only limited operation during playback. When this

Chapter

Repeat Chapter (DVD)

A - B

Repeat A-B

occurs, the symbol

appears on the TV screen, indi-

Off

Repeat Off

cating that the operation is not permitted by the

DVD+VCR or is not available on the disc.

Resume play from this point

Action prohibited or not available

On-Screen Display

General playback status can be displayed on the TV

screen. Some items can be changed on the menu.

Notes

ꢀ Some discs may not provide all of the features on the

on-screen display example shown below.

ꢀ If no button is pressed for 10 seconds, the on-screen

display disappears.

On-screen display operation

Press DISPLAY during playback.

ꢀ You can change the desired status only when “b B”

mark appears on the On-screen display menu item.

Use v/V to select an item.

2 _{The selected item will be highlighted.}

DVD

Items

Function (Use v/V to select desired item)

Selection Method

Title Number

Shows the current title number and total number of

titles, and skips to the desired title number.

, or

1 / 3

Numbers, SELECT/ENTER

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

B, or

1 / 12

Numbers, SELECT/ENTER

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

0:20:09

Numbers, SELECT/ENTER

Audio language

and Digital Audio

Output mode

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

1 ENG

5.1 CH

, or

AUDIO

Subtitle language

Shows the current subtitles language, and

changes the setting.

, or

ABC

1 ENG

1 / 1

SUBTITLE

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

ANGLE

B, or

Sound

Shows the current sound mode, and

changes the setting.

3D SUR

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD Part (Continued)

Disc Language (Audio, Subtitle, Menu) DVD

Initial Settings

Select a language for the disc’s Audio, Subtitle, and

Menu.

Original : The original language set for the disc is selected.

Other : To select another language, press number buttons to

enter the corresponding 4-digit number according to the lan-

guage code list on page 35. If you enter the wrong language

code, press CLEAR.

In this menu system, there are several ways to cus-

tomize the settings provided. Most menus consist of

three levels to set up the options, but some require

greater depth for the variety of settings. If you press

SETUP, only the first level of the menu system will

appear on the TV screen. The second and third level

can be displayed by pressing B. For navigating the

menu levels, you will see “ B “ on the right side of the

menu label to help you to go to the next level.

DISPLAY

TV Aspect

To bring up and exit the Menu:

Press the SETUP to bring up the menu. The second

press of SETUP will take you back to initial screen.

Display Mode

Progressive Scan

Widescreen

Off

To go to the next level:

Press B on the remote control.

Move

Select

To go back to the previous level:

Press b on the remote control.

TV Aspect DVD

4:3: Select when a standard 4:3 TV is connected.

16:9: Select when a 16:9 wide TV is connected.

Initial Settings General Operation

Press SETUP.

The setup menu appears. The screen will show the

current setting for the selected item.

Display Mode DVD

The Display Mode setting works only when the TV

Aspect mode is set to “4:3”.

Use v/V to select the desired item.

Letterbox: Displays theatrical images with masking

bars above and below the picture.

Panscan: Select when a conventional TV set is con-

nected. The video material formatted in the Pan & Scan

style is played back in that style (Both sides of the pic-

ture are cut off).

While the desired item is selected, press B to

3 _{move to the second level.}

Use v/V to select the second desired item.

Press B to move to the third level.

Progressive Scan DVD

Progressive Scan Video provides the highest quality

pictures with less flickering.

If you are using the COMPONENT/PROGRESSIVE

SCAN VIDEO OUT jacks, but are connecting the

DVD+VCR to a standard (analog) television, set

Progressive Scan to Off.

If you are using the Component Video jacks for

connection to a TV or monitor that is compatible with a

progressive scan signal, set Progressive Scan to On.

Press v/V to select the desired setting then

6 _{press SELECT/ENTER to confirm your selection.}

Some items require additional steps.

Press SETUP to exit the setup menu.

LANGUAGE

English

Original

Off

Menu Language

Disc Audio

Caution

Once the setting for progressive scan output is entered,

“Select Enter to confirm and press SELECT/ENTER

key.” appears. Use b B button to select “Enter” and

press SELECT/ENTER button. An image will be visible

only on a progressive scan compatible TV or monitor. If

you set Progressive Scan to “On” in error when this

DVD+VCR is connected to the standard (analog) TV,

the picture will appear scrambled. After ten seconds, the

video output will be restored to the standard setting,

and a picture will be visible on a conventional analog

TV or monitor again.

Disc Subtitle

Disc Menu

Original

Move

Select

Menu Language

Select a language for the setup menu and information

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD Part (Continued)

Dynamic Range Control (DRC)

AUDIO

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to “On” for this effect.

Each DVD disc has a variety of audio output options.

Set the player’s Audio Output according to the type of

audio system you use.

AUDIO

Dolby Digital

DTS

Bitstream

PCM

MPEG

Sample Freq.

DRC

48 kHz

Vocal

Set Vocal to “On” only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

Move

Select

Dolby Digital

OTHERS

Bitstream: Select “Bitstream” if you connected the

DVD+VCR’s DIGITAL OUT jack to a Dolby Digital

decoder (or an amplifier or other equipment with a

Dolby Digital decoder).

PCM: Select when connected to a two-channel digital

stereo amplifier. DVDs encoded in Dolby Digital will be

automatically downmixed to two-channel PCM audio.

The PBC and Auto Play settings can be changed.

OTHERS

PBC

Off

AutoPlay

DTS

Bitstream: Select “Bitstream” if you connected the

DVD+VCR’s DIGITAL OUT jack to a DTS decoder (or

an amplifier or other equipment with a DTS decoder).

Off: If you select “Off”, the DTS signal through the DIGI-

TAL OUT jack is not outputted.

Move

Select

PBC

Set Playback Control (PBC) to “On” or “Off”.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio

CDs.

MPEG

Bitstream: Select “MPEG” if you connected the

DVD+VCR’s DIGITAL OUT jack to a MPEG decoder (or

an amplifier or other equipment with a MPEG decoder).

PCM: Select when connected to a 2-channel digital

stereo amplifier. The DVD+VCR outputs sounds in the

PCM 2ch format when you play a DVD video disc

recorded on the MPEG1, or MPEG2 recording system.

Auto Play DVD

You can set up the DVD+VCR so a DVD disc automati-

cally starts playing whenever the DVD is inserted.

If Auto Play mode is set to “On”, this DVD+VCR will

search the title which playback time is the longest and

then play back the title automatically.

On: Auto Play function is activated.

Off: Auto Play function is not activated.

Sample Freq. (Frequency)

To change the Sample Frequency setting, first select

the desired Dolby Digital, DTS, and MPEG mode as

indicated as above.

If your receiver or amplifier is NOT capable of handling

96 kHz signals, select 48 kHz. When this choice is

made, this unit will automatically convert any 96 kHz

signals to 48 kHz, so your system can decode them.

If your receiver or amplifier is capable of handling

96 kHz signals, select 96 kHz. When this choice is

made, this unit will pass through each type of signal

without any further processing.

Note

The Auto Play function may not work for some DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD Part (Continued)

While “New” is selected, press SELECT/ENTER.

LOCK

Enter a 4-digit password using the numbered

4 _{buttons to create a personal 4-digit security}

Rating

Unlock

New

Password

Country Code

password then press SELECT/ENTER.

Tip

If you make a mistake before pressing

SELECT/ENTER, press CLEAR to delete the entered

all-digit or press b to delete one by one and correct it.

Move

Select

Enter the 4-digit password again and press

5 _{SELECT/ENTER to verify.}

Rating

DVD

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are differ-

ent in each country. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Changing the 4-digit password

1 Follow Steps 1-2 as shown above (Setting your

password).

2 Enter the old password, then press SELECT/ENTER.

3 Select “Change” using v/V buttons then press

SELECT/ENTER.

4 Enter the new 4-digit password, then press

SELECT/ENTER.

5 Enter the 4-digit password again and press

SELECT/ENTER to verify.

Select “Rating” on the Setup menu.

While “Rating” is selected, press B.

If you forget your 4-digit password

If you forget your password, to clear the current pass-

word, follow the procedure below.

When you have already entered a password

Enter a 4-digit password using the numbered buttons to

confirm the personal 4-digit security password, then

press SELECT/ENTER.

1 Press SETUP to display the setup menu.

2 Use the Number buttons to enter the 6-digit number

“210499”.

3 Enter a new code as shown above (Setting your

password).

Select a rating from 1 to 8 using the v/V but-

3 _{tons. One (1) has the least playback restrictions.}

Eight (8) has the most playback restrictions.

Unlock: If you select Unlock, Parental Control is

not active. The disc will play in full.

Country Code DVD

Enter the code of a country/area which standards were

used to rate the DVD video disc, referring to the list

(See “Country Code List”, page 36.).

Ratings 1 to 8: Some discs contain scenes not

suitable for children. If you set a rating for the play-

er, all disc scenes with the same rating or lower will

be played. Higher rated scenes will not be played

unless an alternative scene is available on the disc.

The alternative must have the same rating or the

lower one. If no suitable alternative is found, play-

back will stop. You must enter the 4-digit password

or change the rating level in order to play the disc.

Select “Country Code” on the Setup menu.

While “Country Code” is selected, press B.

When you have already entered a password

Enter a 4-digit password using the numbered buttons to

confirm the personal 4-digit security password, then

press SELECT/ENTER.

Press SELECT/ENTER to confirm your rating

4 _{selection, then press SETUP to exit the menu.}

Password DVD

Select the first character using the v/V buttons.

Setting your password

If you change the rating level to “7” or lower, you must

enter a 4-digit “password” to prevent playback of discs

with higher ratings.

Shift the cursor using B button and select the

4 _{second character using v/V buttons.}

Press SELECT/ENTER to confirm your country

5 _{code selection, then press SETUP to exit the}

menu.

Select “Password” on the Setup menu.

While “Password” is selected, press B.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

Normal Playback

This function lets you search for a desired tape section

in either direction: forward or reverse quickly and visual-

ly.

Preparation:

ꢀ Turn on the TV.

ꢀ Tune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO.

1 Press BACKWARD (.) or FORWARD (>)

during playback.

The DVD+VCR will be activated in the SEARCH

mode.

ꢀ If the DVD+VCR is left in the SEARCH mode for more

than 3 minutes, the DVD+VCR will automatically enter the

PLAY mode, to protect the tape and video heads.

ꢀ

If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to VIDEO.

ꢀ Set the Output Source to VCR as shown in “Setting the

Output Source” on page 6.

Insert a prerecorded video cassette.

2 To return to playback, press PLAY (H).

The

power-up automatically.

indicator will light and the DVD+VCR will

Still Picture and Frame-by-Frame Playback

ꢀ Make sure that the

indicator in the display

1 Press PAUSE/STEP (X) during playback.

Still picture will appear on the TV screen.

ꢀ If a still picture vibrates vertically, stabilize it by pressing

CH/TRK (v/V) on the remote control.

ꢀ If the DVD+VCR is left in the STILL mode for more than 5

minutes, the DVD+VCR will automatically enter the STOP

mode to protect the tape and video heads.

window is not lighted. If it is, press POWER once.

ꢀ If a tape without a safety tab is inserted, the unit will

start playback automatically.

Press PLAY (H) once.

2 _{PLAY appears on the TV screen .}

ꢀ It is not necessary to select the tape speed for play-

back. It will be automatically selected by the DVD+VCR.

ꢀ During playback, the TV/VCR selector switches to VCR

mode automatically.

2 Press PAUSE/STEP (X) repeatedly to advance the

video picture one frame at a time while viewing a still

picture.

Press STOP (x) to stop playback.

3 To return to playback, press PLAY (H).

3 _{STOP appears on the TV screen.}

ꢀ If the tape reaches the end before STOP (x) is

pressed, the DVD+VCR will automatically stop, rewind,

eject, and will turn itself off (Only when no disc).

Slow Motion

1 During the still mode, press FORWARD (>).

The tape will be played back at a speed 1/19 times

slower than the normal speed.

ꢀ During slow playback, use CH/TRK (v/V) on the Remote

Control to minimize noise bands.

Tracking Control

Auto Tracking

The automatic tracking function adjusts the picture to

remove snow or streaks.

The AUTO TRACKING function works in the following

cases:

ꢀ A tape is played back for the first time.

ꢀ Tape speed (SP, LP, SLP) changes.

ꢀ Streaks or snow appear because of scratches on the tape.

ꢀ If slow motion mode continues for more than 3 minutes,

the DVD+VCR will automatically change to playback

mode.

2 To return to playback, press PLAY (H).

Ad JUMP (Advertisement Jump)

This is useful for skipping commercials or short program

segments.

Manual Tracking

If noise appears on the screen during playback, press

either CH/TRK (v/V) on the remote control or

CHANNEL (v/V) on the front panel until the noise on

the screen is reduced.

1 Press Ad JUMP during the playback mode.

The tape will be fast forward picture search through

30 seconds of recording.

ꢀ The skipping time can be extended by pressing Ad JUMP.

ꢀ Subsequent presses result in advancing the fast forward

picture search time by 30-second increments (maximum 3

minutes).

ꢀ

In case of vertical tremble, adjust these controls very carefully.

ꢀ Tracking is automatically reset to normal when the tape is

ejected or the power cord is unplugged for more than 3 sec-

onds.

2 When the search is completed, the DVD+VCR will go

into playback mode automatically.

Special Effect Playbacks

Special effects playback notes

ꢀ Horizontal lines (noise bars) will appear on the TV screen. This

is normal.

ꢀ The audio is automatically muted during special effect modes,

so there is no sound during search.

ꢀ During the high-speed picture search modes, a short period is

needed to stabilize tape speed when re-entering the PLAY

mode. Slight interference may be observed during this period.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape(Continued)

Normal Recording

Timer Recording

Preparation:

This DVD+VCR can be programmed to record up to 8

programs within a period of 1 year. For unattended

recording, the timer needs to know the channels to be

recorded and the starting and ending times.

ꢀ Turn on the power of both the DVD+VCR and TV.

ꢀ Tune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO.

ꢀ If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to

VIDEO.

Things to know before starting

If you try to set the program timer before setting the clock,

ꢀ

Insert a video cassette that the safety tab intact.

PLEASE SET THE CLOCK appears for a moment and

then CLOCK menu appears on the TV screen. Set the time

and date before proceeding.

Select the desired channel by using CH/TRK

2 _(v/V).

ꢀ

Make sure a tape is in the DVD+VCR and the safety tab is

in place or the tape will be automatically ejected.

ꢀ If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select the

LINE1 or LINE2 by pressing INPUT.

Preparation:

ꢀ Turn on the power of both the DVD+VCR and the TV.

Be sure the TV is set to the DVD+VCR output channel (3 or 4).

ꢀ Make sure the TUNING BAND in the TUNING menu is set

appropriately (TV or CATV).

Set the desired recording speed (SP or SLP) by

3 _{pressing SP/SLP.}

Set the MTS mode as desired (See page 15, 25).

ꢀ

ꢀ This DVD+VCR is not designed to record in LP mode.

Press MENU and the MAIN menu will appear.

Press REC (z) once.

Use v/V to choose the PROGRAM menu.

5 _{Recording will start. (The REC indicator will light in}

the display window.)

ꢀ REC indicator appears only when the Output Source is

set to VCR.

Press SELECT/ENTER to go to the PROGRAM

3 _menu.

ꢀ If a cassette with no safety tab is loaded, the cassette

will be ejected automatically.

The PROGRAM menu will appear.

ꢀ If all programs have already been entered, FULLY

PROGRAMMED message will appear for a moment

and then PROGRAM 1 will appear on the TV screen.

Press STOP (x) to stop recording.

6 _{If the tape reaches the end before STOP (x) is pressed,}

the DVD+VCR will automatically stop, rewind, eject, and it

will turn itself off (Only when no disc).

To pause the recording

1 Press PAUSE/STEP (X) to pause the tape during

recording.

The REC indicator will flash in the display window.

Use b/B to choose the PROGRAM No. (1-8).

2 When you want to continue recording, press

PAUSE/STEP (X) or press REC (z).

ꢀ After 5 minutes in pause mode, the tape will be stopped

automatically to protect the tape and the video heads.

Use V to choose the MONTH option.

5 _{Use b/B to choose the desired month.}

Use V to choose the DAY option.

To record one TV program while

watching another

1 Press TV/VCR to select the TV mode during record-

ing.

The TV indicator appears.

2 Using the TV, select the channel to be viewed.

6 _{Use b/B to choose the desired day.}

Use V to choose the START option.

Use b/B to choose the desired start time.

Use V to choose the STOP option.

8 _{Use b/B to choose the desired stop time.}

Use V to choose the CHANNEL option.

9 _{Use b/B to choose the desired channel}

(Channel, LINE1 or LINE2).

Tips

Always use PAUSE/STEP (X) for the best results when mak-

ing changes during recording.

For example: To change channels during recording, first press

Cable Users: If you have CABLE TV and used Cable Box

in Connecting Antenna/Cable TV to DVD+VCR (page 11),

using a cable box converter, you must set the channel in

this step to match the cable box output channel (usually

CH 3 or 4). Change channels on the cable box instead of

channels on the DVD+VCR.

PAUSE/STEP (X) to put the unit in pause mode. Then select

the desired channel on the DVD+VCR, and press

PAUSE/STEP (X) again to resume recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape(Continued)

Use V to choose the SPEED option.

Checking (Erasing) the Timer Program

Programming can be checked whenever the DVD+VCR

is turned on.

Use b/B to choose the desired recording

speed (AUTO, SP or SLP).

ꢀ AUTO mode determines how long tape is left and

switches speed from SP to SLP, if necessary, to

complete recording the program. There will be some

picture and sound distortion at the point of the speed

change.

1 Press MENU and the MAIN menu will appear.

2 Use v/V to choose the PROGRAM menu.

Press SELECT/ENTER and the PROGRAM menu

will appear.

Use V to choose the REPEAT option.

Use b/B to choose the desired repeat (ONCE,

WEEKLY or DAILY).

ONCE event....for recording up to 8 programs on a

single day or over the days within a period of 1 year.

WEEKLY event....for recording up to 8 programs on a

certain day of every week.

DAILY event....for recording up to 8 programs at the

same time(s) from Monday through Friday.

3 Use b/B to select a program you want to check or

erase. If you want to erase the program, press

CLEAR.

4 Press MENU to return to the TV screen.

Program Priority

If the starting and ending

times of two or more timer

recordings overlap on the

same day, priority is given to

the earliest recording. For

Tip

If the input data is wrong, use v to select the data

and correct it using b/B.

Press MENU, the program will be memorized

at the DVD+VCR.

example, in the diagram at

left Program number 2 will

ꢀ

indicator lights in the display window.

not be recorded until Program number 1 is finished. The

first part of Program number 2 will not be recorded.

Likewise, Program number 3 will not be recorded until

Program number 2 is finished, and so on.

ꢀ If the program preset time is past, the PAST TIME

PROGRAMMED message will appear on the TV

screen. Return to the incorrect program and program

it with the correct time.

ꢀ If you had entered a past date, the timer recording

will be performed on that date of the next year.

ꢀ Additional programs may be entered by repeating

steps 1-12.

Cable Users: If your cable hookup is via a TV convert-

er box, you can program multiple recordings only on

the converter box output channel. This is because the

converter determines what channel you view through

your DVD+VCR.

Tip

If you have finished programming and you want to set the

DVD+VCR to record the programs you have entered.

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE

DVD+VCR. The DVD+VCR is now set to record the preset

programs.

Note

If the power fails or the DVD+VCR is unplugged from the AC

outlet, the correct clock time and timer settings are kept in

memory for approximately 3 seconds. After 3 seconds, the

clock and program timer will be reset when power is restored.

Reset the clock according to instructions.

After setting up a timer recording, recording will start if no other

timer recordings are scheduled to occur at the same time (see

“Program Priority” at right).

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

Instant Timer Recording

Dubbing and Editing

If you wish to edit or dub your camcorder (or another

VCR) recordings to this DVD+VCR, the rear (or Front)

panel mounted Audio and Video (A/V) input jacks

make the connections quick and easy. These direct

A/V jacks will also provide better picture results than

using the RF jack on the rear panel.

Instant Timer Recording allows you to make a recording

easily of a preset length without using the program

timer.

Preparation:

ꢀ Turn on the power of both the DVD+VCR and the TV.

ꢀ Be sure the TV is tuned to the DVD+VCR output channel (3 or 4).

ꢀ If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to VIDEO.

Connect the camcorder’s (or another VCR’s) A/V

outputs to your DVD+VCR as illustrated on page 13.

Set the input channel “LINE2”. (press INPUT to

Insert a video cassette with the safety tab intact.

2 _{select LINE2.)}

ꢀ

If you have connected your DVD+VCR to the A/V input

jacks on the rear of DVD+VCR, you should select the

input channel LINE1 by pressing INPUT twice.

Select the desired channel by using CH/TRK

2 _{(v/V) or number (0-9).}

The channel number appears on the TV screen.

ꢀ If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select the

LINE1 or LINE2.

Play the tape in the camcorder (or another

3 _{VCR). If you have a TV attached to your}

DVD+VCR, you can see the video playing.

When you desire recording to begin, press

4 _{DVD+VCR’s REC (z) once to start.}

Set the desired recording speed (SP or SLP) by

3 _{pressing SP/SLP.}

ꢀ You can stop the recording by pressing STOP (x).

The tape speed will appear on the TV screen.

Press REC (z) twice.

The menu as illustrated, will appear on the TV screen.

Note

Before recording, please confirm the recording start position.

ꢀ Recording will start. (The

indicator will light)

Copying from DVD to VCR

Press REC (z) repeatedly to select the record-

5 _{ing time length.}

This unit allows you to copy the contents of a DVD to a

VHS tape.

At the end of the recording, the DVD+VCR will stop

recording and shut off.

ꢀ During Instant Timer Recording, changing the channel

on the DVD+VCR will not be possible.

Note

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted

to copy Macrovision encoded DVDs. “Lock” is

displayed in the display window.

ꢀ You can stop the recording by pressing STOP (x).

INSTANT TIMER RECORD MENU

0H30M ..... 9H00M ➝ 0H00M

INSTANT TIMER RECORD

Insert Disc

Insert the disc you wish to copy in the DVD deck

and close the disc tray.

CHANNEL

SPEED

Length Display

(each additional press of

REC (z) increases recording

time 30 minutes)

START

LENGTH

NOW

0H30M

Insert VHS Tape

2 _{Insert a blank VHS video tape into the VCR deck.}

Press PLAY (H) on the DVD deck.

3 _{The DVD will go into play mode}

Checking the Recording Time

Press REC (z) once to check the recording time. The

recalled setting will automatically return to the TV

screen after 6 seconds.

ꢀ If the DVD disc menu appears, you may need to press

the PLAY (H) manually to begin copying.

Press REC (z) on the VCR deck or on the

4 _{remote control.}

To extend the Recording Time

The recording time can be extended anytime by press-

ꢀ The DVD+VCR will go into Record mode.

ꢀ “COPY” indicator will light.

ing REC (z).

Subsequent presses result in advancing the recording

time by 30-minute increments.

Stop the Copy Process

5 _{When the DVD is finished playing, press STOP (x) to end}

the copy.

You must stop the Copy process manually when the DVD

movie ends, otherwise the unit may record over and over

again.

Notes

ꢀ If you press PAUSE/STEP (X) during instant timer record-

ing, the DVD+VCR will enter the recording pause mode.

Instant timer recording is cancelled.

Note

When you stop the DVD playback during copying, the record-

ing on VCR is stopped automatically.

ꢀ If the DVD+VCR is set to “0H00M”, the DVD+VCR goes to

normal recording mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

VHS Hi-Fi Stereo System/

MTS Broadcast

MTS (Multi-Channel TV Sound)

This DVD+VCR will decode MTS stereo and bilingual

(SAP) off-the-air broadcast sound signals. It also

decodes stereo TV sound from local cable companies,

as long as they operate on assigned cable frequencies

and use the EIA-recommended MTS stereo/bilingual TV

This DVD+VCR is equipped with the VHS Hi-Fi audio

sound system for recording and playback. The informa-

tion below gives a brief description of Hi-Fi audio and

how to record and play a tape in the Hi-Fi audio mode.

sound system.

Playback with Hi-Fi Stereo Audio Sound

Multichannel TV Sound Indicator (MTS)

Shows On-screen as illustrated below when

A stereo TV with AUDIO/VIDEO input jacks or a stereo

audio system is required for correct stereo playback. To

experience the full and rich stereo sound available with

Hi-Fi recorded tapes, we recommend the connection of

this unit to a home stereo audio system.

SELECT/ENTER is pressed.

ꢀ

One or both of the indicators will light, depending on the

MTS broadcast.

TV screen

STEREO

CH 4

STEREO/SAP

Lights up when a stereo broadcast

is being received.

SAP

Lights up when a SAP BILINGUAL

broadcast is being received.

Set the AUDIO MODE option to HI-FI on the

SETUP menu .

If only STEREO appears on the TV screen.

The DVD+VCR can record in stereo onto the VHS Hi-Fi audio

tracks when the BROADCAST TYPE option is in the STEREO

position. The DVD+VCR will also record mono audio onto the

mono audio track.

Set the AUDIO OUTPUT option to STEREO

If only SAP appears on the TV screen.

Set the BROADCAST TYPE option to SAP.

2 _position.

If STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE option to select the desired

recording mode (STEREO or SAP).

(STEREO) POSITION: The left channel sound (L) is

heard from the left speaker and the right channel sound

(R) is heard from the right speaker.

(LEFT) POSITION: The left channel sound (L) is heard

from both speakers.

(RIGHT) POSITION: The right channel sound (R) is heard

from both speakers.

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which

is used for a second language or additional information.

When the station broadcasts a Second Audio Program,

follow the procedure below to record the SAP.

Insert a video cassette with the safety tab intact.

Set the BROADCAST TYPE option to SAP

2 _{(SETUP menu).}

Press MENU.

Do this only if the SAP appears on the TV screen or you

know the program will use the SAP.

Insert a cassette and press PLAY (H).

4 _{Adjust volume at your stereo system.}

Press MENU.

Set the desired recording speed (SP or SLP) by

4 _{pressing SP/SLP.}

Select the desired channel. The SAP should

5 _{appear on the TV screen.}

Press REC (z) once

You are now recording the program you see and hear on the

TV.

Press STOP (x) to stop recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

Tape Counter Memory Feature

Additional Information

ꢀ

In manual recording, Timer recording, Instant Timer

Recording, playback, or fast forward modes, the DVD+VCR

automatically starts rewinding the tape at the end of the

tape. The cassette will stop at the beginning of the tape and

be ejected, and the DVD+VCR will turn itself off (Only when

no disc).

Real-Time Counter

Shows length of tape run in hours, minutes, and sec-

onds. Press CLK/CNT to select the real-time counter

display.

Every press of CLK/CNT changes the TV screen as

illustrated below.

ꢀ

After you have finished using the DVD+VCR, rewind, eject,

and remove the cassette. Place the cassette in its protec-

tive sleeve to protect it from dust. It is not necessary to

rewind the cassette before removing it, but if you do, it will

be ready to play or record the next time you use it.

2:15 AM

CLOCK

0:05:25

COUNTER

REM 1:07

REMAINING TIME

Be sure the DVD+VCR Channel Selector is on the correct

channel you wish to record. The channel that is being

recorded can always be checked by setting the television

on the DVD+VCR channel (3 or 4) and pressing the

TV/VCR selector to turn off the DVD+VCR’s TV indicator.

ꢀ

Counter changes to “0:00:00” when the cassette is

ejected.

The real-time counter does not operate if nothing is record-

ed on the tape.

The real-time counter will not work unless a tape is

inserted.

Do not attempt to hook up more than one television set to

the DVD+VCR for either recording or playback.

Counter Memory Function

Auto Play System

This DVD+VCR features automatic playback.

Load a cassette (with the safety tab removed).

This is useful if there is a section of tape you want to

view immediately after recording or if you want to return

to the same point several times.

ꢀ

The Output Source is changed to VCR mode automatically.

The power turns on automatically and playback begins.

At the end of the tape, the DVD+VCR stops, then rewinds.

Begin recording or playing a tape.

The cassette is ejected after rewinding and turn itself off

automatically.

Press CLK/CNT repeatedly to display the real-

2 _{time counter appears on the TV screen.}

At the point that you want locate later, reset the

3 _{real-time counter to “0:00:00” by pressing}

CLEAR.

LOAD

TAPE

AUTO

POWER

OFF

AUTO

PLAY

AUTO

REWIND

EJECT

Continue to play or record.

Note

Auto power off does not function during regular DVD play

mode. (DVD+VCR power stays on.)

Press STOP (x) when recording or playback fin-

5 _ishes.

Press BACKWARD (.).

6 _{The tape automatically stops when the tape counter}

returns to about “0:00:00”.

Tape Remaining

This function allows the time of the remaining tape to be

displayed during recording or playback.

Press CLK/CNT until the REM indicator displays on the

TV screen during recording or playback.

Note

The remaining tape length indicator may not be displayed

correctly depending on the condition of the tape and the kind of

the tape (T-140, T-160, or T-210 etc)

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD

Playing DVD

General Features

Playback Setup DVD

Note

Unless stated otherwise, all operations described use

the remote control. Some features may also be

available on the Setup menu.

ꢀ Turn on the TV and select the video input source con-

nected to the DVD+VCR.

ꢀ Audio system: Turn on the audio system and select

the input source connected to the DVD+VCR.

^ꢀSet the Output Source to DVD as shown in “Setting

the Output Source” on page 6.

1 / 3

Moving to another TITLE DVD

When a disc has more than one title, you can move to

another title as follows:

Press OPEN/CLOSE (Z) to open the disc tray.

ꢀ

Press DISPLAY then press v/V to select the title

icon. Then press the appropriate numbered button

(0-9) to select a title number.

Load your chosen disc in the tray, with the play-

2 _{back side down.}

ꢀ

To go directly to any title at STOP mode

(or RESUME STOP mode), press the numbered

button (0-9).

Press OPEN/CLOSE (Z) to close the tray.

3 _{Playback starts automatically. If playback does not}

start, press PLAY (H).

In some cases, the disc menu might appear

instead.

Moving to another CHAPTER

1 / 12

DVD

When a title on a disc has more than one chapter, you

can move to another chapter as follows:

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD which offers a menu.

ꢀ Press BACKWARD (.) or FORWARD (>) briefly

during playback to return to the beginning of the cur-

rent chapter or to select the next chapter.

^ꢀPress BACKWARD (.) twice briefly to step back to

the previous chapter.

^ꢀTo go directly to any chapter during playback,

press DISPLAY. Then, press v/V to select chapter

icon. Then, enter the chapter number using the

numbered buttons (0-9).

DVD

Use the b/B/v/V buttons to select the title/chapter you

want to view, then press SELECT/ENTER to start

playback.

Press TITLE or DISK MENU to return to the menu

screen.

To stop playback at any other time, press STOP.

4 _{This is RESUME STOP mode.}

To exit RESUME STOP mode, press STOP again.

Slow Motion DVD

1 Press PAUSE/STEP (X) during playback.

The DVD+VCR will now go into PAUSE mode.

Notes

ꢀ If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit password

must be entered and/or the disc must be authorized

(see “LOCK”, on page 20).

2 Press BACKWARD (.) or FORWARD (>)

during pause mode.

The DVD+VCR will enter SLOW mode.

3 Use BACKWARD (.) or FORWARD (>) to

select the required speed: t 1/16, t 1/8, t 1/4 or

t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T

1/2 (forward).

ꢀ DVDs may have a region code.

Your DVD+VCR will not play discs that have a region

code different from your DVD+VCR. The region code

for this DVD+VCR is 1 (one).

ꢀ Do not keep an image or on-screen displayed for a

long time.

4 To return to playback, press PLAY (H).

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD (Continued)

General Features (Continued)

0:20:09

Time Search

DVD

The Time Search function allows you to start playing at

any chosen time on the disc.

Still Picture and Frame-by-Frame Playback

DVD

1 Press DISPLAY during playback. The on-screen

1 Press PAUSE/STEP (X) during playback.

The DVD+VCR will now go into PAUSE mode.

2 You can advance the picture frame by frame by

pressing PAUSE/STEP (X) repeatedly on the remote

control.

display appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

2 Within 10 seconds, use v/V to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

3 To return to playback, press PLAY (H).

Search DVD

3 Within 10 seconds, use the numbered buttons to

enter the required start time. Enter hours, minutes

and seconds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

Press and hold BACKWARD (.) or FORWARD (>)

for about two seconds during playback.

The DVD+VCR will now go into SEARCH mode.

Press and hold BACKWARD (.) or FORWARD (>)

repeatedly to select the required speed: mX2, mX4,

mX16, mX100 (backward) or MX2, MX4,

MX16, MX100 (forward).

4 Within 10 seconds, press SELECT/ENTER.

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

3 To return to playback, press PLAY (H).

3D SUR

3D Surround DVD

Title

Repeat

DVD Video Discs - Repeat Chapter/Title/Off

DVD

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

1 To repeat the currently playing chapter, press

REPEAT.

The Repeat Chapter icon appears on the TV screen.

2 To repeat the title currently playing, press REPEAT a

second time.

1 Press DISPLAY during playback.

2 Use v/V to select the sound icon.

The sound option will be highlighted.

The Repeat Title icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

3 Use b/B to to select “3D SUR”.

To turn off the 3D Surround effect, select “Normal”.

A - B

Repeat A-B DVD

To repeat a sequence:

1 Press A-B at your chosen starting point.

“A-” appears briefly on the TV screen.

2 Press A-B again at your chosen end point (after more

than 3 seconds).

“A-B” appears briefly on the TV screen, and the repeat

sequence begins.

3 To cancel the sequence, press A-B.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD (Continued)

General Features (Continued)

Special DVD Features

Zoom DVD

Checking the contents of DVD Video

discs: Menus

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

DVDs may contain menus that allow you to access spe-

cial features. To use the disc menu, press DISC MENU.

Then, press the appropriate number button to select an

option. Or, use b/B/v/V buttons to highlight your selec-

tion, then press SELECT/ENTER.

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

The square frame will be displayed in the right bottom of the

picture. If no button is pressed for more than 10 seconds,

the square frame will disappear.

Each press of the ZOOM button changes the TV screen in

the sequence shown below.

DVD

Title Menu

1 Press TITLE.

400% size → 1600% size → multi zoom mode → normal size

2 Use the b B v V buttons to move through the

zoomed picture (400% or 1600%), or to enlarge and

reduce the picture size through the multi zoom mode.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

3 To resume normal playback, press ZOOM repeatedly

until the normal picture appears.

3 To remove the title menu, press DISC MENU.

Note

DVD

ꢀ The zoom function may not work for some DVDs.

ꢀ The zoom function may not work on multi-angle

scenes.

Disc Menu

1 Press DISC MENU.

The disc menu is displayed.

2 To remove the disc menu, press DISC MENU again.

#1 1 / 9

DVD

Marker Search

1 / 1

DVD

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

Camera Angle

If the disc contains scenes recorded at different camera

angles, you can change to a different camera angle

during playback.

1 During disc playback, press MARKER when playback

reaches the spot that you want to memorize.

The Marker icon will appear on the TV screen briefly.

ꢀ

Press ANGLE repeatedly during playback to select a

desired angle.

The number of the current angle appears on the TV screen.

2 Repeat step 1 to enter up to nine Marker points on a

disc.

DVD

Changing the Audio Language

1 ENG

To Recall a Marked Scene

5.1 CH

1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

Press AUDIO repeatedly during playback to hear a

different audio language or audio track.

2 Within 10 seconds, press 1/2 to select a Marker num-

ber that you want to recall.

3 Press SELECT/ENTER.

Playback will start from the Marked scene.

ABC

1 ENG

DVD

Subtitle

4 To remove the MARKER SEARCH menu, press

SEARCH.

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

To clear a Marked Scene

1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

Note

appears, the feature is not available on the disc.

2 Within 10 seconds, press 1/2 to select a Marker num-

ber that you want to erase.

3 Press CLEAR.

The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker

numbers.

5 To remove the MARKER SEARCH menu, press

SEARCH.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3 Discs

Notes on MP3 Recordings

Playing an Audio CD and MP3

About MP3

MP3

Discs

ꢀ An MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

ꢀ The player can not read an MP3 file that has a file

extension other than “.mp3”.

The DVD+VCR can play an audio CD. Also, the

DVD+VCR can play MP3 formatted recordings on

CD-ROM, CD-R or CD-RW discs.

Before playing MP3 recordings, read the notes on MP3

Recordings on the right side of this page.

MP3 Disc compatibility with this player is limit-

ed as follows:

1. Sampling Frequency / only at 44.1 kHz

2. Bit rate / within 32 - 320kbps

Insert a disc and close the tray.

Audio CD; Audio CD menu appears on the TV

screen. Go to step 3.

MP3 disc; The MP3 menu appears on the TV

screen. Go to step 2

3. CD-R physical format should be “ISO 9660”

4. If you record MP3 files using the software which

cannot create a FILE SYSTEM, for example “Direct-

CD” etc., it is impossible to playback MP3 files. We

recommend that you use “Easy-CD Creator”, which

creates an ISO9660 file system.

5. A single session disc requires MP3 files in the first

track. If there is no MP3 file in the 1st track, it can-

not play back MP3 files. If you wish to playback MP3

files, format all the data in the disc or use a new

one.

00:00:00

MP3

104

Audio CD

List

TRACK1

TRACK2

TRACK3

TRACK4

TRACK5

Program

List

Program

Add

Add All

Delete

Music Folder

Add

Add All

Delete

Delete All

TRACK6

TRACK7

TRACK8

Audio CD Menu

MP3 Menu

6. File names should be named using 8 letters or less

and must incorporate “.mp3” extension

e.g. “********.MP3”.

7. Do not use special letters such as “/ : * ? “ < > ” etc.

8. Total number of files and folders on the disc should

be less than 999.

Press v/V to select a folder then press

2 _{SELECT/ENTER.}

A list of files in the folder appears.

Press v/V to select a track then press

3 _{PLAY (H) or SELECT/ENTER.}

Playback starts.

This DVD+VCR requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 files). That require certain pre-existing conditions

(see above) to insure compatible playback.

During playback, the current track’s elapsed playing

time will appear on the display window and menu.

Playback will stop at the end of the disc.

Tips

ꢀ Press and hold V to move to the next page.

ꢀ Press and hold v to move to the previous page.

ꢀ If you are in a file list on the MP3 menu and want to

Customers should also note that permission must

be required in order to download MP3 files and

music from the Internet. Our company has no right

to grant such permission. Permission should

always be sought from the copyright owner.

return to the Folder list, use the v/V to highlight

press SELECT/ENTER.

and

To stop playback at any other time,

4 _{press STOP (x).}

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3 Discs (Continued)

MP3

Pause

Random

1 Press RANDOM during playback.

1 Press PAUSE/STEP (X) during playback.

The unit automatically begins Random Playback and

“Random” appears on the menu screen.

2 To return to playback, press PLAY(H) or press

PAUSE/STEP (X) again.

2 To return to normal playback, press RANDOM

repeatedly until “Random” disappears on the menu

screen.

Moving to another Track

MP3

Repeat A-B

To repeat a sequence in a title:

ꢀ Press BACKWARD (.) or FORWARD (>) briefly

during playback to go to the next track or to return to

the beginning of the current track.

1 Press A-B at your chosen starting point.

The Repeat icon and “A” appears on the menu screen.

ꢀ Press BACKWARD (.) twice briefly to step back to

the previous track.

2 Press A-B again at your chosen end point.(after more

then 3 seconds)

The Repeat icon and “A - B” appears on the menu screen,

and the repeat sequence begins.

ꢀ To go directly to any track, enter the track number

using the numbered buttons (0-9) during playback.

MP3

3 To exit the sequence and return to normal play, press

A-B again.

Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu screen.

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat icon and “ALL” appears on the menu screen.

3 To cancel Repeat mode, press REPEAT a third time.

MP3

1 Press and hold BACKWARD (.) or FORWARD

(>) for about two seconds during playback.

The player will now go into SEARCH mode.

2 Press and hold BACKWARD (.) or FORWARD

(>) repeatedly to select the required speed: mX2,

mX4, mX8 (backward) or MX2, MX4, MX8

(forward).

Search speed and direction are indicated on the menu

screen.

3 To exit SEARCH mode, press PLAY(H).

Note

The DVD+VCR mutes sound during search mode of

MP3 files.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3

Programmed Playback

Programmed Playback with Audio CD

and MP3 Discs

The Program function enables you to store your favorite

tracks from any disc in the player memory.

Program can contain 99 tracks (Audio CD) or 300

tracks (MP3).

Repeat Programmed Tracks

ꢀ To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the screen.

ꢀ To repeat all tracks on the program list, press

REPEAT a second time.

The Repeat icon and “ALL” appears on the screen.

ꢀ To cancel Repeat mode, press REPEAT a third time.

Insert an Audio CD or MP3 disc.

Audio CD or MP3 menu will appear.

Erasing a Track from Program List

Press v V b B to select a track on the List.

1 Select the track that you wish to erase from the

Program list.

2 Press v V b B to highlight the “Delete” icon then

press SELECT/ENTER. Or, press CLEAR.

The selected track is deleted on the program list.

3 Repeat steps 1-2 to delete additional tracks on the

Program list.

Press PROGRAM. Or, press v V b B to highlight

3 _{the “Add” icon then press SELECT/ENTER.}

The selected track is added to the program list.

Repeat steps 2-3 to place additional tracks on

4 _{the Program list.}

Erasing the Complete Program List

Press v V b B to move to the Program list.

Press v V b B to highlight the “Delete All” icon then

press SELECT/ENTER.

All tracks on the program list are deleted.

Press v/V to select the track you want to start

6 _playing.

00:00:00

MP3

104

00:00:00

Audio CD

List

Program

Music8

List

TRACK1

TRACK2

TRACK3

TRACK4

TRACK5

Program

TRACK8

Add

Add All

Delete

Add

Add All

Delete

Music1

Music16

Music5

Music9

Music1

Music7

Music6

Music3

TRACK3

TRACK12

TRACK7

TRACK6

Music2

Music3

Music4

Music5

Music6

Music7

Delete All

TRACK6

TRACK9

TRACK7

TRACK8

TRACK1

TRACK10

Tips

ꢀ Press and hold V to move to the next page.

ꢀ Press and hold v to move to the previous page.

ꢀ If you are in a file list on the MP3 menu and want to

return to the Folder list, use the v/V to highlight

press SELECT/ENTER.

and

Press PLAY (H) or SELECT/ENTER to start.

Playback begins in the order in which you programmed

the tracks.

Playback stops after all of the tracks on the Program list

have played once.

To resume normal playback from pro-

8 _{grammed playback, select a track on the}

List then press SELECT/ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

ꢀ The power cord is disconnected.

ꢀ Plug the power cord into the wall outlet

securely.

ꢀ No disc is inserted.

ꢀ No tape is inserted.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The power is on, but

the DVD+VCR does not

work.

ꢀ The TV is not set to receive DVD+VCR

signal output.

ꢀ Select the appropriate video input mode

on the TV so the picture from the

DVD+VCR appears on the TV screen.

No picture.

ꢀ TV/VCR mode for DVD+VCR is set to

TV.

ꢀ Press the TV/VCR button on the remote

control repeatedly to choose VCR

mode. TV indicator disappears in the

display window.

ꢀ The video cable is not connected

securely.

ꢀ Connect the video cable securely.

ꢀ The connected TV power is turned off.

ꢀ Turn on the TV.

No sound.

ꢀ The equipment connected with the

audio cable is not set to receive

DVD+VCR signal output.

ꢀ Select the correct input mode of the

audio receiver so you can listen to the

sound from the DVD+VCR.

ꢀ The audio cables are not connected

securely.

ꢀ Connect the audio cable securely.

ꢀ The power of the equipment connected

with the audio cable is turned off.

ꢀ Turn on the equipment connected with

the audio cable.

ꢀ The Digital Audio Output is set to the

wrong position.

ꢀ Set the Digital Audio Output to the

correct position, then turn on the

DVD+VCR again by pressing POWER.

The playback picture is ꢀ The disc is dirty.

poor.

ꢀ Clean the disc.

ꢀ Tape heads are dirty.

ꢀ Clean video heads.

ꢀ Tape is a rental or was recorded on

another VCR.

ꢀ Use CH/TRK (v/V) for manual tracking

adjustment while tape is playing.

ꢀ No disc is inserted.

ꢀ No tape is inserted.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The DVD+VCR does

not start playback.

ꢀ An unplayable disc is inserted.

ꢀ Insert a playable disc. (Check the disc

type, color system, and Regional code.)

ꢀ The disc is placed upside down.

ꢀ

Place the disc with the playback side down.

ꢀ The disc is not placed within the guide.

ꢀ Place the disc on the disc tray correctly

inside the guide.

ꢀ The disc is dirty.

ꢀ Clean the disc.

ꢀ The Rating level is set.

ꢀ Cancel the Rating function or change

the rating level.

The remote control

does not work properly.

ꢀ The remote control is not pointed at the

remote sensor of the DVD+VCR.

ꢀ Point the remote control at the remote

sensor of the DVD+VCR.

ꢀ The remote control is too far from the

DVD+VCR.

ꢀ Operate the remote control within 23 ft

(7 m).

ꢀ There is an obstacle in the path of the

remote control and the DVD+VCR.

ꢀ Remove the obstacle.

ꢀ The batteries in the remote control are

exhausted.

ꢀ Replace the batteries with new ones.

ꢀ This remote control use the same

buttons for VCR and DVD functions

(ex. PLAY).

ꢀ When using a VCR, first press the VCR

button. When using a DVD, first press

the DVD button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Continued)

Cause

Correction

Symptom

ꢀ Those channels were deleted with the

CH. ADD/DEL option.

ꢀ Use CH. ADD/DEL. to restore channels.

See “Channel Selection” on page 15.

Some channels are

skipped over when

using CH/TRK (v/V)

ꢀ Antenna or cables are loose.

ꢀ Tighten connections or replace cable.

Picture and sound of

broadcasting channel

are weak or missing.

ꢀ Wrong TUNING BAND option is being

used.

ꢀ Try all TUNING BAND options. See

“Channel Selection” on page 15 for

details.

ꢀ Camcorder is off.

ꢀ Turn camcorder on and operate

properly.

Camcorder image is not

shown.

ꢀ DVD+VCR SOURCE SELECT is not set ꢀ Press INPUT to select LINE input chan-

Camcorder image via

A/V input to DVD+VCR

is not shown on TV

screen.

to LINE1 or LINE2.

nel (LINE1 or LINE2).

ꢀ Clock in DVD+VCR is not set to correct

time.

ꢀ Set clock to correct time. See “Setting

the Clock” on page 16.

Timer recording is not

possible.

ꢀ Timer has been programmed

incorrectly.

ꢀ Reprogram Timer. See “Timer

Recording” on pages 22 and 23.

ꢀ

indicator does not appear after pro-

gramming timer.

ꢀ Reprogram Timer.

ꢀ DVD+VCR is in Timer Recording mode. ꢀ This is the normal indication that the

DVD+VCR is in TIMER mode.

indicator appears

after DVD+VCR is turned

off.

ꢀ TV is not Stereo-compatible.

ꢀ No action is possible.

Stereo Audio Record

and/or Playback is not

present.

ꢀ Broadcast program is not in stereo for-

mat.

ꢀ No action is possible.

ꢀ DVD+VCR A/V Out jacks are not con-

nected to TV A/V In jacks.

ꢀ Make A/V connections. Stereo is

available only via A/V output from

DVD+VCR.

ꢀ DVD+VCR Audio/Video Out is not

selected for viewing at the TV.

ꢀ Select AUX or A/V source as TV input.

ꢀ DVD+VCR BROADCAST TYPE mode is ꢀ Set BROADCAST TYPE mode to

set to SAP or MONO.

STEREO. See “Setting the VCR Setup

Menu” on page 15.

Moisture Condensation

In locations where moisture condensation may occur:

Moisture condensation can occur:

• When the DVD+VCR is moved from a cold place to a

warm place.

•

Keep the DVD+VCR plugged into an AC power outlet

with POWER On. This will help prevent condensation.

• Under extremely humid conditions.

• When condensation has occurred, wait a few hours

for the DVD+VCR to dry before using it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 18).

Language

Abkhazian

Afar

Code

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

Language

Fiji

Code

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

Language

Lingala

Code

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

Language

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Code

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Finnish

French

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Amharic

Arabic

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Maori

Armenian

Assamese

Aymara

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla 6678

Hebrew

Hindi

Nepali

Telugu

Thai

Bhutani

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Pashto, Pushto 8083

Persian

7065

8076

8084

8185

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Rhaeto-Romance 8277

Romanian

Russian

8279

8285

8377

8365

7168

8382

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Danish

Sanskrit

Dutch

Korean

Kurdish

Laothian

Latin

Scots Gaelic

Serbian

Wolof

English

Xhosa

Esperanto

Estonian

Faeroese

Serbo-Croatian 8372

Yiddish

Yoruba

Zulu

Shona

Sindhi

8378

8368

Latvian, Lettish 7686

Download from Www.Somanuals.com. All Manuals Search And Download.

Country Code List

Enter the appropriate code number for the initial setting “Country Code” (See page 20).

Country

Code

Country

Code

Country

Code

Country

Code

Afghanistan

Albania

El Salvador

Equatorial Guinea

Eritrea

Macau

Saint Vincent

Macedonia

Madagascar

Malawi

& Grenadines

Algeria

SamoaWS

San Marino

Saudi Arabia

Senegal

American Samoa

Andorra

Estonia

Ethiopia

Malaysia

Angola

Falkland Islands

Faroe Islands

Fiji

Maldives

Anguilla

Mali

Seychelles

Sierra Leone

Singapore

Slovak Republic

Slovenia

Antarctica

Antigua and Barbuda

Argentina

Armenia

Malta

Finland

Marshall Islands

Martinique (French)

Mauritania

Mauritius

Former Czechoslovakia

Former USSR

France

Aruba

Solomon Islands

Somalia

Australia

France (European Territory) FX

French Guyana GF

French Southern Territories TF

Mayotte

Austria

Mexico

South Africa

South Korea

Spain

Azerbaidjan

Bahamas

Bahrain

Micronesia

Moldavia

Gabon

Gambia

Monaco

Sri Lanka

Bangladesh

Barbados

Belarus

Georgia

Mongolia

Sudan

Germany

Ghana

Montserrat

Morocco

Suriname

Svalbard and

Belgium

Gibraltar

Mozambique

Myanmar

Namibia

Jan Mayen Islands SJ

Belize

Great Britain

Greece

Swaziland

Sweden

Benin

Bermuda

Greenland

Grenada

Nauru

Switzerland

Syria

Bhutan

Nepal

Bolivia

Guadeloupe (French)

Guam (USA)

Guatemala

Guinea

Netherlands

Netherlands Antilles

New Caledonia (French)

New Zealand

Nicaragua

Niger

Tadjikistan

Taiwan

Bosnia-Herzegovina

Botswana

Bouvet Island

Brazil

Tanzania

Thailand

Togo

Guinea Bissau

Guyana

British Indian

Ocean Territory

Brunei Darussalam

Bulgaria

Tokelau

Haiti

Nigeria

Tonga

Heard and

Niue

Trinidad and Tobago

Tunisia

McDonald Islands HM

Norfolk Island

North Korea

Burkina Faso

Burundi

Honduras

Turkey

Hong Kong

Hungary

Iceland

India

Northern Mariana Islands MP

Turkmenistan

Cambodia

Cameroon

Canada

Norway

Turks and Caicos Islands TC

Oman

Tuvalu

Pakistan

Uganda

Cape Verde

Cayman Islands

Central African Republic

Chad

Indonesia

Iran

Palau

Ukraine

Panama

United Arab Emirates

United Kingdom

United States

Uruguay

Iraq

Papua New Guinea

Paraguay

Ireland

Chile

Israel

Peru

China

Italy

Philippines

Pitcairn Island

Poland

USA Minor Outlying Islands UM

Christmas Island

Cocos (Keeling) Islands

Colombia

Comoros

Ivory Coast

Jamaica

Japan

Uzbekistan

Vanuatu

Polynesia (French)

Portugal

Vatican City State

Venezuela

Jordan

Congo

Kazakhstan

Kenya

Puerto Rico

Qatar

Vietnam

Cook Islands

Costa Rica

Croatia

Virgin Islands (British)

Virgin Islands (USA)

Kiribati

Reunion (French)

Romania

Kuwait

Wallis and Futuna Islands WF

Cuba

Kyrgyzstan

Laos

Russian Federation

Rwanda

Western Sahara

Yemen

Cyprus

Czech Republic

Denmark

Latvia

S. Georgia

Yugoslavia

Zaire

Lebanon

Lesotho

Liberia

& S. Sandwich Isls. GS

Djibouti

Saint Helena

Saint Kitts

& Nevis Anguilla

Saint Lucia

Zambia

Dominica

Zimbabwe

Dominican Republic

East Timor

Ecuador

Libya

Liechtenstein

Lithuania

Luxembourg

Saint Pierre and Miquelon PM

Saint Tome and Principe ST

Egypt

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements

AC 120V , 60 Hz

23W

430 X 97.5 X 293 mm (16.9 x 3.9 x 11.5 inches) (w x h x d)

4.8 kg (10.58 lbs)

5˚C to 40˚C (41˚F to 104˚F)

5 % to 90 %

Power consumption

Dimensions (approx.)

Mass (approx.)

Operating temperature

Operating humidity

Signal system

NTSC

Inputs

ANTENNA IN

VHS VIDEO IN

VHS AUDIO IN

Antenna or CATV input, 75 ohms

1 Vp-p 75 ohms, sync negative, RCA jack x 2

-6.0 dBm more than 47 kohms, RCA jack (L, R) x 2

Outputs

VIDEO OUT

S-VIDEO OUT

1 Vp-p 75 ohms, sync negative

(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1

COMPONENT VIDEO OUT

(PROGRESSIVE SCAN)

Audio output (digital audio)

Audio output (analog audio)

RF OUT

(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2

0.5 V (p-p), 75 ohms, RCA jack x 1

2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1

Channel 3 or 4

VCR Specifications

Head system

Timer

Tape speed

Four head helical scan azimuth system

12-hour display type with AM, PM

SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec

12.7 mm

Tape width

Maximum recording time

Rewind time

Antenna

SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)

About 3 minutes (T-120)

75 ohms (VHF/UHF)

VHF output signal

Channel coverage

Frequency range

Signal-to-noise ratio

Dynamic range

Channel separation

Channel 3 or 4 (Switchable)

VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)

20Hz to 20kHz

More than 43dB

More than 88 dB

More than 60 dB

DVD Specifications

Laser system

Frequency response

Semiconductor laser, wavelength 650 nm

DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100dB (ANALOG OUT jacks only)

Less than 0.008%

More than 95 dB (CD), More than 100 dB (DVD)

Accessory:

Video cable x 1, Audio cable(L/R) x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries x 2

^ꢀDesign and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pyramid Car Audio Music Mixer PM 4001 User Guide
Q See Cable Box qsdr44drtc User Guide
Regency Stove C34 LP2 User Guide
Roberts Radio Clock Radio ecologic 6 User Guide
RocketFish Power Supply RF 700WPS2 User Guide
Saeco Coffee Makers Dehumidifier DEU001H User Guide
Salton Waffle Iron WM 1186 User Guide
Samsung Air Conditioner DB98 15114B5 User Guide
Sansui Flat Panel Television SLED2237 User Guide
Sanus Systems Indoor Furnishings DFAV30 User Guide