DESCRIPTION
Catalog #
Project
Type
Date
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes THREE (3) PAR30 Metal Halide
lamps.
Comments
Prepared by
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
SPECIFICATION FEATURES
A... Housing
branch wiring, 6 #12 90º C supply
locking lamp adjustment. Beveled-edge
lamp ring is secured with threadless,
Housing, junction box & trimless
meshplate assembly are all steel
conductors or 60º C for end of run. The
COMBOLIGHT®
Next Generation
Recessed
fixture is also UL listed as ‘access above bayonet action. Optional retractable arm is
construction. Perforated meshplate allows ceiling not required’.
for trimless installation in drywall/plaster
available for lamp pulldown and extreme
aiming. Includes Med. base sockets.
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to
1.25” ceiling thickness. Optional Chicago
Plenum configuration available.
D... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
Multi-Lamp Fixture
of the housing behind removable access C Channel, Tbar fasteners, and bar
doors. Integral electronic metal halide
hangers. Four tabs on housing for
ballasts on individually removable “trays” securing to structure. Perforated flaps
Three (3) Light
PAR30 Metal Halide
for easy maintenance. May also be con-
figured for remote power.
along housing sides for securing trimless
insert to fixture and drywall.
B... System Protection:
G... Labels
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
E ... Lamps
Three (3) PAR30 Metal Halide lamps mount-
ed in adjustable double gimbals. Lamp
cULus listed for non-type IC
applications, suitable for use in damp
locations.
New Construction
Housing
holes in housing provide cooler operation. holders are individually removable and may
be regressed 1” for additional cut-off. Lamp
Ceiling Cut-Out: 6.49” x 17.87”
Trimless
C... Junction Box
Junction Box is UL listed for through
can accept up to three optical accessories
(i.e. lens + hex louver + snoot). 45º x 45º
27.52”
15.01”
7.45”
12.01”
23.39”
17.07”
5.69”
Double
Gimbal
Perforated
Meshplate
45º x 45º
Adjust
5.69”
Integral Electronic
Metal Halide Ballasts
Thermal
Protector
For use with 39W or 70W PAR30MH lamps.
ORDERING INFORMATION
C3
E
N
N
Configuration
Lamp Type / Wattage Label
Power Supply
Lamp Mechanism
Trim Insert Finish
C3 = COMBOLIGHT
Recessed Three (3) Light
039M30 = 39 Watt PAR30 Metal Halide
Voltage
G = Double Gimbal
N = Trimless
070M30 = 70 Watt PAR30 Metal Halide
1
2
= 120V
= 277V
R
= Retractable Double Gimbal
Housing
Power Supply
Trim Insert
N = Trimless
Housing Interior/Electrical Door/Sleeve
N = New Construction
E = Electronic Metal Halide
Finish
C = Chicago Plenum
Ballast
W = White
B
S
= Black
= Industrial Silver
rev 022408
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Download from Www.Somanuals.com. All Manuals Search And Download.
|