Installation & Operation
Installation & Operation
VRBT330W
Hands-Free
Bluetooth Car Kit
Before using the VRBT330W while operating a vehicle you MUST read and fully understand
these instructions. Failure to do so may result in damage to personal property and/or per-
sonal injury or death.
Turning your VRBT330W ON & OFF
ON
1. Press and hold the
button for 3 seconds, and the model number of the
PARTS
paired Bluetooth enabled cell phone will be displayed on the screen.
2. “VRBT330W” will be displayed on the screen if there is no connection with a
Bluetooth® enabled cell phone. If you have paired a Bluetooth® enabled cell
phone in advance, it will automatically re-connect with the device and display
the name of the connected cell phone.
Dear Customer,
Check and inspect all parts after you open the package and before you start using the VRBT330W.
CONGRATULATIONS. The VRBT330W Hands Free Bluetooth Car Kit, when used as
described, will give you years of dependable service in your car, truck, RV, or mini-
van. We have taken numerous measures in quality control to ensure that your product
arrives in top condition and will perform to your satisfaction. In the rare event that your
VRBT330W Hands Free Bluetooth Car Kit contains a damaged or missing item, does
not perform as specified, requires warranty service, or you have an installation prob-
lem, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR TOLL
FREE NUMBER FROM THE U.S.A. AND CANADA 1-800-445-1797 and ask to speak
with a member of our technical service team, or submit your questions by e-mail to
[email protected] and a member of our technical service team will respond
by e-mail to your questions. Our in-house technical service team will expedite deliv-
ery of your part, advise you on installation, or help troubleshoot a problem with you.
If your product needs warranty service, our technical service team representative will
help you obtain the fastest remedy possible under the warranty.
OFF
Press the
button until you hear a double tone (6 seconds) and “POWER OFF” is
displayed on the screen.
Pairing
FUNCTIONS
The features and functions of the VRBT330W are only available if the Bluetooth enabled cell phone has
these features and functions. The VRBT330W will not give your Bluetooth enabled cell phone any fea-
tures or functions that it does not already have.
Pairing the VRBT330W for First Time
1. In power OFF mode, press and hold the
button until you hear a beep, when
the unit enters pairing mode you will hear 2 beeps and the screen will display
“Pairing” If a Bluetooth® enabled phone is not detected in 5 seconds, then the
unit will automatically power OFF.
MENU
A/T
Call Transfer
Phone Book
Call List
Speed Dial
Delete Phone book
Backlight Adjustment
Disconnect
2. Follow your Bluetooth® enabled cell phone’s instructions for searching for Blue-
tooth devices.
Before You Install
3. After a successful search the Bluetooth® devices will be shown on your mobile
phone, choose “VRBT330W” and confirm;
Volume Up
Next
Before first use, fully charge the VRBT330W to prolong the battery’s life. When the
VRBT330W is charging, the battery charging indicator inside of the unit will be Red.
When fully charged, the charging indicator will turn OFF.
4. Your mobile phone will request for a password, please enter “0000”
5. The screen will display the name of the mobile phone to indicate the pairing is
successful.
Pairing in Power ON Mode
Features
1. Press and hold the button until “Pairing” is displayed on the screen. If a Blu-
etooth enabled phone is not detected in 5 seconds, then the unit will automati-
cally power OFF.
Receive a Call
Voice Dialing
Last Number Re-Dial
Mic Mute
Pairing
Speed Dial
DSP Technology for Noise Reduction and Echo Cancellation
Wireless Phone Book transfer via OPP or AT command
Call Transfer between Cell Phone and VRBT330W during conversation
Phone book capacity for up to 600 numbers
Caller ID display, if the number is stored in the phone book.
Voice Dialing
Last Call Re-dialing
Call Waiting
Speed Dialing
Call List
Volume Down
Previous
2. Follow your Bluetooth® enabled cell phone’s instructions for searching for Blue-
tooth® devices.
End a Call
Reject a Call
Last Number Re-Dial
No(in menu)
Power ON/OFF
3. After a successful search the Bluetooth® devices will be shown on your mobile
phone, choose “VRBT330W” and confirm;
4. Your mobile phone will request for a password, please enter “0000”
5. The screen will display the name of the mobile phone to indicate the pairing is
successful.
ICONS ON THE LCD
Telephone
Phone book
Mute
Battery Status
Bluetooth
Quick Connect
1. With only one Bluetooth® enabled cell phone in pairing range, press the button
in power ON mode.
Auto Connection
Bluetooth Pairing Memory for up to Eight devices
Screen Backlight adjustable
Automatic Connection
1. With a previously paired Bluetooth enabled cell phone in pairing range, press
the button in power ON mode.
Charging the VRBT330W
Never connect the 12V adaptor to the VRBT when it is installed on a steering wheel. Nev-
er attempt to drive the vehicle when the 12V adaptor is connected to the VRBT330W.
Specifications
Disconnect
1. Press and hold the button for 3 seconds or more in standby mode and you
will hear a beep, then the VRBT330W will be disconnected from the paired cell
phone.
Battery:................................................................. Rechargable 3.7V 1050mAh Li-Pol
Speaker: ............................................................................2 speakers @ 4Ω/2W each
Battery Life ..............................Standby > 250 hours, Continous Talk Time > 5 hours
Charging Time..............................................................................................< 3 Hours
Charging Voltage....................................................................................+5VDC (USB)
Microphone: ........................................................................................... 45dB +/-2dB
Frequency Range: .................................................................... 2402MHz - 2480MHz
Built in Memory: ..............................................................................................256MB
Operating Temperature:...............................................................................-10 - 50℃
Storage Temperature: .................................................................................-20 - 70℃
Noise reduction: ....................................................................................................Yes
Echo Cancellation: ................................................................................................Yes
Supported Profile: ...............................................................................HSP, HFP, OPP
Phone book Capacity:........................................................................................... 600
Fully charging the battery before first use will prolong the battery’s life.
When charging the VRBT330W the charging indicator will be Red and when fully
charged it will turn OFF.
Answering a Call
1. When there is an incoming call the screen will light up and the Phone Icon will
flash.
Installing the VRBT330W
2. Press the button to answer the call.
1. Choose one of the supplied silicon plastic spacers and insert it into the
VRBT330W.
Call Waiting
1. While on a phone call and you receive another call, press the button to put
the 1st call on hold and answer the 2nd call.
2. To switch between calls press the button.
2. Hold VRBT330W and expand opening between the bracket and the unit until it
opens wide enough for the steering wheel to fit. Make sure the unit clings tight
on the steering wheel and can not be moved easily. If the VRBT330W does not
hold fast to the steering wheel you may need to change the silicon spacer. Do
not operate the vehicle if the VRBT330W is loose on the steering wheel.
3. To end the 1st call and continue with the 2nd call, press the
button.
NOTE: Three Way Calling is only available if your paired Bluetooth cell phone has
this function.
This device, as well as all other wireless devices, may be subject to interfer-
ence. Interference may be caused by cell phones, Bluetooth headsets, Wi-Fi
routers, power lines and other various electrical equipment, etc.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|