DESCRIPTION
Catalog #
Project
Type
Date
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes SIX (6) 12V PAR36 lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Comments
Prepared by
SPECIFICATION FEATURES
A... Housing
D... Electrical
locking lamp adjustment. Beveled-edge
Housing and junction box are aluminum,
Integral electronic or magnetic low voltage lamp ring is secured with threadless,
COMBOLIGHT®
Next Generation
Recessed
trim assembly is steel with powder coated transformers. Transformers and electrical
bayonet action. Optional retractable
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
are mounted in a separate metal enclosure arm is available for lamp pulldown and
box attached to the junction box with 18” extreme aiming.
of flexible conduit. Transformer enclosure
the inner hardware of the fixture from sight includes a separated wiring compart-
F ... Mounting
Multi-Lamp Fixture
below the ceiling. Can accommodate
various ceiling thickness.
ment and six knockouts for conduit entry. A mounting frame is provided which
Transformer enclosure features perforated inserts into the ceiling opening. The
metal door for easy maintenance access
and cooler operation. Entire electrical
housing is then pushed through the
mounting frame and secured with
B... System Protection:
Six (6) Light
12V PAR36
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
assembly (jbox and transformer enclosure) screws.
is removable from the housing for easy
G... Labels
maintenance.
cULus listed for non-type IC
applications, suitable for use in damp
locations.
E ... Lamps
Six (6) 12V PAR36 lamps mounted in
Remodel Housing
w/ 0.75” Trim Flange
C... Junction Box
Junction Box is UL listed for through branch adjustable double gimbal. Lamp holders
Ceiling Cut-Out: 7.94” x 41.22”
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
are removable and may be regressed 1”
for additional cut-off. Lamps can accept
listed as ‘access above ceiling not required’. snoot or baffle accessories. 45º x 45º
42.92”
11.31”
Double
Gimbal
45º x 45º
Adjust
9.95”
1.70”
8.19”
9.45”
Required
above
41.62”
40.95”
40.13”
6.69”
ceiling
24.66”
Integral Low Voltage
Transformers
9.25”
Separate Wiring Compartment
Thermal
Protector
18” flexible conduit
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
ORDERING INFORMATION
C6
R
T
Configuration
Lamp Type / Wattage Label
050P36 = 50 Watt max. PAR36 12V
Power Supply
Voltage
1
2
Lamp Mechanism
G = Double Gimbal
= Retractable Double Gimbal
Trim Finish
C6 = COMBOLIGHT
Recessed Six (6) Light
W = White
= 120V
= 277V
= Black
R
B
S
= Industrial Silver
Housing
Power Supply
Trim Flange
T = 0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
R = Remodel
E = Electronic Low Voltage
Transformer
Finish
W = White
M = Magnetic Low Voltage
Transformer
B
S
= Black
= Industrial Silver
rev 050108
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Download from Www.Somanuals.com. All Manuals Search And Download.
|