RCA TV VCR Combo T13066 User Guide

tv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/v  
crtv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv  
/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/vcr  
tv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/v  
crtv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv  
/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/vcr/  
tv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/v  
crtv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv  
/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/vcr/  
tv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/v  
crtv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv  
/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/vcr/  
tv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/v  
crtv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv  
/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/vcr  
tv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/v  
crtv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv  
/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/vcr/  
tv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/v  
crtv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv  
/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/vcr  
tv/vcrtv/vcrtv/vcrtv/vcrtv/vcrtv/v  
USERS  
GUIDE  
crtv/vcr  
v/vcrtv  
vcrtv/  
vcrtv/  
rtv/vcr  
/vcrtv/vc  
v/vcrtv/  
rtv/vcr  
/vcrt  
tv/vcrt  
/vcrtv/  
vcrtv/  
vc  
tv  
rt  
vc  
tv  
v/  
tv  
vcr  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ta b l e o f Co n t e n t s  
Se t u p a n d Co n n e c t io n s .......................................................... 3  
Step 1: Unpack the TV/VCR and Remote Control ........................... 4  
Step 2: Insert Batteries in the Remote ............................................ 4  
Step 3: Place your TV/VCR on a Stable Surface............................... 4  
Step 4: Choose a Hookup................................................................. 4  
How to Hook Up a VCR or Camcorder ..................................... 5  
Connection A: Attaching to a Dipole Antenna  
(With No Cable Box)............................................................. 5  
Connection B: Attaching to an Outside Antenna,  
Set-top Antenna, or Cable System (With No Cable Box) .. 5  
Connection C: Attaching to a Cable Box Required to  
Unscramble All Channels .................................................... 6  
Connection D: Attaching to a Cable Box Required to  
Unscramble Premium Channels Only ................................ 6  
Connection E: Attaching to a VCR for Copying Tapes ............. 7  
Connection F: Attaching a Camcorder for Copying Tapes ...... 7  
Step 5: Connect the G-LINK Cable ................................................... 8  
Find the Remote Control Sensor ............................................... 8  
Step 6: Plug in the TV/VCR ............................................................... 9  
Step 7: Turn on the TV/VCR.............................................................. 9  
Step 8: Set Up the GUIDE Plus+ System........................................... 9  
Step 9: Set Up the Rest of the TV/VCR .......................................... 12  
Select the Language ................................................................ 12  
Put Channels into Memory (Auto Channel Search) ............... 12  
Set the Signal Type (Optional) ................................................ 13  
Add or Remove Channels from the TV/VCRs Memory .......... 13  
Set the Time and Date (Clock)................................................. 14  
Usin g t h e Re m o t e ..................................................................... 15  
Remote Control Buttons ................................................................ 16  
Programming the Remote ............................................................. 18  
Using the Remote to Control a Device ................................... 19  
Modes of Operation ................................................................ 19  
O p e r a t in g In st r u c t io n s ....................................................... 21  
How to Play a Tape......................................................................... 22  
Using the Playback Features .......................................................... 23  
Recording Features ........................................................................ 28  
Basic Recording ........................................................................ 29  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ta b l e o f Co n t e n t s  
Express Recording .................................................................... 29  
Timer Recording....................................................................... 30  
Copying and Editing Tapes...................................................... 31  
Fe a t u r e s a n d Co n t r o l s ......................................................... 33  
Using On-Screen Displays............................................................... 34  
Calling Up On-Screen Displays ................................................ 34  
Adjusting the Video................................................................. 34  
About Closed Captioning .............................................................. 35  
To View Closed Captions ......................................................... 35  
Using Sleep Timer ........................................................................... 36  
Wake-Up Timer ........................................................................ 36  
Parental Controls and V-Chip ........................................................ 38  
Setting TV Rating Limits .......................................................... 39  
Blocking Age-Based Ratings ............................................. 40  
Viewing Age-Based Ratings .............................................. 40  
Blocking Specific Content Themes ................................... 41  
Viewing Specific Content Themes .................................... 41  
Setting Movie Rating Limits .................................................... 42  
Blocking Movie Ratings..................................................... 42  
Viewing Movie Ratings ..................................................... 42  
Blocking Unrated TV Programs ............................................... 43  
Lock/Unlock Parental Controls ...................................................... 43  
Using the GUIDE PIus+ System....................................................... 44  
Getting In & Out of the GUIDE PIus+ System ......................... 45  
Downloading Data .................................................................. 45  
Channel Mapping .................................................................... 45  
The Different GUIDE Plus+ System Menus ............................. 45  
Grid Guide ................................................................................ 45  
Sort ........................................................................................... 47  
Re f e r e n c e ..................................................................................... 51  
Front Panel ..................................................................................... 52  
Back Panel....................................................................................... 53  
Troubleshooting ............................................................................. 53  
Cleaning the TV/VCR ...................................................................... 56  
Limited Warranty ........................................................................... 57  
Index ............................................................................................... 61  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
Ge t t in g st a r t e d  
Se t u p a n d c o n n e c t io n s  
1
2
3
4
Thismanu  
alisdesignedt  
ogety oust artedquickl  
y.  
Thefirstsectionsofthemanualshowyouhowtoget  
setupandconnected,programtheremote,anduse  
yourTV/VCR.Italsoguidesyouthroughallofthe  
menus,features,andcontrolsofyourTV/VCR.  
Usin g t h e Re m o t e  
Thereferencesectioninthebackofthebook  
containstroubleshootingtips,careandcleaning  
instructions,accessoryorderinginformation,andyour  
warrant  
y.  
Wellify ourT V/VCRsouto fthebo x,let sget  
started.  
O p e r a t in g In st r u c t io n s  
Fe a t u r e s a n d Co n t r o l s  
Re f e r e n c e  
5
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
St e p 1: Un pa c k t h e TV/ VCR a n d  
r e m o t e c o n t r o l  
ONOFF  
VCR1  
TV  
DVD VCR2  
AUX SAT•CABLE  
MUTE  
SEARCH  
CH  
+
CH  
Contact your dealer if your remote control is missing.  
SPEED  
GUIDE  
GO BACK  
INFO  
OK  
MENU  
CLEAR  
1
2
5
8
0
3
6
9
4
7
St e p 2: In se r t b a t t e r ie s in t h e  
r e m o t e  
INPUT  
ANTENNA  
REVERSE  
REC•VCR+  
PLAY  
STOP  
FORWARD  
PAUSE  
-
TRACKING  
+
EDIT FR. ADV  
1. Remove the battery compartment cover from the back of the  
remote.  
2. Insert fresh batteries. Make sure that the polarities (+ and -) are  
aligned correctly.  
3. Replace the cover.  
St e p 3: Pl a c e y o u r TV/ VCR o n a  
st a b l e su r f a c e  
CAUTION: To reduce the risk of personal injury or damage to the  
TV/VCR, take care in selecting a surface or stand on which to place your  
product and when moving or carrying it. Use a stable surface  
or a strong steady stand and a location where the TV/VCR cannot  
be tipped over or easily pulled off, particularly by children. Do not  
attempt to carry or move this product with one hand. Grasp the TV/VCR  
with both hands with the TV front against your body to prevent it from  
slipping out of your grasp.  
St e p 4: Ch o o se a H o o k u p  
Answer the questions to choose the appropriate hookup for your  
TV/VCR.  
1. Ho w d o e s yo u r TV/VCR re ce ive sig n a ls?  
Choose one answer from below.  
Dipole antenna Use Connection A.  
Outside antenna Use Connection B.  
Cable System Go to question 2.  
2. Wh a t t yp e o f Ca b le -TV syst e m * d o yo u h a ve ?  
G-LINK Ca b le  
Choose one answer from below.  
Please locate the G-LINK cable (provided)  
when youre getting ready to set up your  
TV/VCR. You need to use this cable to  
connect your TV/VCR to your cable box  
(if you have one) in order for all of the  
features of the program guide to work  
properly.  
Cable without a box Use Connection B.  
Cable box to unscramble all channels Use Connection C.  
Cable box to unscramble only premium channels, such as HBO,  
Showtime, Cinemax, etc. Use Connection D.  
*You may need to contact your local cable company for assistance.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
H O W TO H o o k u p a VCR o r Ca m c o r d e r  
To hook up a VCR or camcorder for copying tapes, use Connection E or F.  
Antenna Base  
Co n n e c t io n A:  
Attaching to a Dipole Antenna (With No Cable Box)  
Antenna Slot  
Follow these steps to connect a dipole antenna to your TV/VCR. Do not  
connect a dipole antenna if you plan to connect a different type of  
indoor or outdoor antenna or cable system. Optional accessories may be  
required for this connection.  
Twin-Lead Ends  
1. Insert the antenna base into the slot on the back of your TV/VCR.  
2. Connect the twin-lead ends of the antenna to the screw terminals of  
an antenna adapter.  
Antenna Adapter  
3. Connect an antenna adapter to the IN FROM ANTENNA jack on the  
back of the TV/VCR.  
IN FROM  
ANTENNA  
INPUT  
G-LINK  
4. Plug the TV/VCR power cord into the back of the TV/VCR.  
AUDIO VIDEO  
5. Go to Step 5: Connect the G-LINK Cable.”  
Once you have plugged in your TV/VCR, adjust the length and position  
of the antenna rods for the best reception. For viewing VHF channels,  
extend the rods fully. For UHF viewing, shorten the rods.  
Match Your Type of Antenna or Cable  
or  
or  
or  
Co n n e c t io n B:  
Attaching to an Outside Antenna, Set-top Antenna, or  
Cable System (With No Cable Box)  
Antenna  
Mixers  
Antenna  
Adapter  
1. Connect as shown. Optional accessories may be required for this  
connection.  
2. Plug the TV/VCR power cord into the back of the TV/VCR.  
3. Go to Step 5: Connect the G-LINK Cable.”  
Back of TV/VCR  
IN FROM  
ANTENNA  
INPUT  
G-LINK  
AUDIO VIDEO  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
Cable from Cable System  
Co n n e c t io n C:  
Cable Box  
Attaching to a Cable Box Required to Unscramble All  
Channels  
IN  
OUT  
1. Connect as shown. Optional accessories may be required for this  
connection.  
2. Plug in power cords of TV/VCR and cable box.  
3. Go to Step 5: Connect the G-LINK Cable.”  
Co n n e c t io n D:  
Coaxial Cable  
Attaching to a Cable Box Required to Unscramble  
Premium Channels Only  
1. Connect as shown. Optional accessories may be required for this  
connection.  
Back of TV/VCR  
IN FROM  
ANTENNA  
2. Plug in power cords of TV/VCR and cable box.  
INPUT  
G-LINK  
AUDIO VIDEO  
3. Place the A-B switch in the B position to watch premium channels.  
Place the A-B switch in the A position to watch other channels when  
cable box is not needed.  
4. Go to Step 5: Connect the G-LINK Cable.”  
Cable from Cable System  
Antenna Splitter  
Cable Box  
In order for the cable box to properly  
w ork w ith your TV/VCR, you must  
complete “Step 8: Set Up the GUIDE Plus+  
System,” later in this section.  
IN  
OUT  
Coaxial Cables  
A-B Switch  
A
B
Back of TV/VCR  
IN FROM  
ANTENNA  
INPUT  
G-LINK  
AUDIO  
VIDEO  
Coaxial Cable  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
Co n n e c t io n E:  
VCR (Playback Only)  
Attaching to a VCR for Copying Tapes  
IN FROM  
ANT.  
1. Connect as shown. Optional accessories may be required for this  
connection.  
VHF/UHF  
AUDIO  
IN OUT  
VIDEO  
IN OUT  
OUT TO TV  
3 CH. 4  
2. Plug in power cords of VCR and TV/VCR.  
3. For further instructions, see the section Copying and  
Audio/Video  
Cables  
Editing Tapes.”  
Press 00 on the remote to select the line (audio/video) inputs on the  
TV/VCR to receive the signal from the VCR.  
From Antenna, Cable  
or Cable Box  
IN FROM  
ANTENNA  
If your VCR has stereo AUDIO OUT jacks, connect the audio cable to the  
jack labeled MONO. If neither jack is labeled MONO, you may need a  
Y-adapter to hear both channels.  
INPUT  
Optional  
G-LINK  
AUDIO VIDEO  
TV/VCR  
(Recording Only)  
Co n n e c t io n F:  
Attaching a Camcorder for Copying Tapes  
The unauthorized recording of television  
programs and other materials may  
infringe upon the rights of others.  
1. Connect as shown. Optional accessories may be required for this  
connection.  
2. Plug in TV/VCRs power cord.  
3. For further instructions, see the section Copying and  
Editing Tapes.”  
Press 00 on the remote to select the line (audio/video) inputs on the  
TV/VCR to receive the signal from the camcorder.  
If your camcorder has stereo AUDIO OUT jacks, you may need a  
Y-adapter to hear both channels.  
L
E
C
R
C
EDIT  
V
ER  
POW  
OFF  
A
R
E
M
A
C
AUDIO  
RF  
VIDEO  
Camcorder (Playback Only)  
Audio/Video  
Cable  
White  
Audio  
Plug  
Yellow  
Video  
Plug  
From Antenna, Cable  
or Cable Box  
IN FROM  
ANTENNA  
INPUT  
Optional  
G-LINK  
AUDIO  
VIDEO  
TV/VCR  
(Recording Only)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
St e p 5: Co n n e c t t h e G-LIN K Ca b l e  
This is an important step because the G-LINK cable enables your TV/VCR  
and the GUIDE Plus+ system (the on-screen guide that lists what shows  
are on TV) to work with your cable box. The G-LINK cable will not work  
until the GUIDE Plus+ system is set up. (Setting up the GUIDE Plus+  
system is explained in Step 8: Set Up the GUIDE Plus+ System,later in  
this section.)  
Note that you must remove the demo pin  
from the G-LINK jack on the back of the  
TV/VCR before inserting the G-LINK cable.  
If you do not have a cable box, you do not have to connect the cable. If  
your TV is connected to a cable box, you must connect the G-LINK cable  
to your cable control box, complete the TV/VCR menu setup, and  
activate auto-programming. Unless you complete these steps, no  
channels will be listed in the on-screen program guide and your TV will  
not work properly.  
Fin d t h e Re m o t e Co n t r o l Se n so r  
You have to attach the G-LINK cables end to the remote control sensor  
on the cable box. Some cable boxes have a label attached to it that  
identifies the remote control sensor. If the remote sensor isnt labeled on  
your cable box, you need to use the remote control that came with the  
cable box to locate the sensor. To do this:  
1. Turn off the cable box.  
2. Hold the remote control (n o t the one that came with your TV/VCR,  
but the one that ca m e w it h the cable box) so it is touching the  
front of the component.  
Tip  
You may w ant to use a piece of clear  
plastic tape to temporarily affix the G-LINK  
cable end until you have completed the  
connection. That w ay you can easily move  
it if you have not placed it correctly over  
the sensor.  
3. Slowly move the remote control across the front of the cable box  
while you press the power button on and off. You must press and  
release the power button each time you move the remote (holding  
down the button wont work).  
CABLE BOX  
CHANNEL  
03  
CHANNEL  
SENSOR  
03  
4. When the cable box turns on, youve located the remote control  
sensor.  
5. Attach the end of the G-LINK cable to your cable box (see  
instructions below).  
At t a c h t h e En d t o t h e Ca b l e Bo x  
Attach the end of the G-LINK cable to your cable box as shown in the  
illustration to the right.  
Connect to G-LINK jack  
on the back of the TV/VCR.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
St e p 6: Pl u g in t h e TV/ VCR  
Plug the power cord into the wall outlet, matching the wide blade of  
the plug with the wide slot in the outlet. Be sure to insert the plug  
completely.  
St e p 7: Tu r n o n t h e TV/ VCR  
Press POWER on the front of the TV/VCR or press TV or VCR on the  
remote. The indicator in the POWER button on the front of the TV/VCR  
will light when the TV/VCR is on.  
The first time you turn on the TV/VCR, you will be asked to set up the  
GUIDE Plus+ system.  
St e p 8 : Se t u p t h e GUIDE PIUS+ Sy s t e m  
If you move or if any of your information  
changes:  
You can set up the GUIDE Plus+ system to display your local program  
listings and control your cable box. If you are using a cable box and do  
not set up the GUIDE Plus+ system, your TV/VCR will not work properly.  
1. Return to the GUIDE Plus+ setup and  
reinitialize the setup to indicate that  
you are no longer using a cable box.  
(You must clear the previous channel  
lock before re-setting the TV/VCR.)  
The GUIDE Plus+ Setup appears when you turn on your TV/VCR for the  
first time.  
2. Press MENU on the remote to  
display the TV/VCR Main Menu.  
The GUIDE Plus+ system is the on-screen guide that lists what shows  
are on TV in your area. In order to get program information, you  
need to set up the GUIDE Plus+ information.  
3. Press 5, then 1 to initiate Auto Channel  
Search.  
4. When the Auto Channel Search is  
complete, press MENU.  
The G-LINK cable must be connected to the back of your TV/VCR,  
and the other end must be attached to your cable box (if you have  
one) in order for the GUIDE Plus+ Setup to work.  
5. Press 6, then 1 to create a new setup.  
(See “Step 8: Set Up the GUIDE Plus+  
System,” at left, for more details.)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
To complete GUIDE Plus+ setup, the G-LINK cable must be properly  
attached to your cable box if you have one. See Step 5: Connect the  
G-LINK Cable,later in this section.  
Select your country and enter your ZIP  
or Postal code. For Canada, use  
CH ^ and v to select letters.  
The next series of screens asks you  
about your cable TV setup. If you have  
a cable box, you must set the GUIDE  
Plus+ system to control it. Otherwise,  
it will not be able to locate and  
download program information.  
Tune your cable box to Channel 2 and  
then select the brand of your cable  
box from the choices available. The  
system then searches for the correct  
code to control your cable box. When  
your cable box switches to channel 9 it  
has located the correct code.  
Select Yes if the cable box changed to channel 9, or No if it did not. If you select No, the system will try another code.  
If the GUIDE Plus+ system cannot recognize your cable box after several tries, a screen stating Cable Box test failed...Please  
consult your manual and try againappears. Choose either Try Again or Skip Cable Box Setup. If you get this message, you  
should also:  
Double check the brand of your cable box, and try entering it again.  
Check to make sure the G-LINK cable is attached correctly.  
If you choose to skip the cable box setup some features of the guide may not be available until you successfully complete  
this procedure.  
1 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
Once the correct model of cable box  
has been identified, you need to set  
the cable boxs output channel.  
Enter the channel you use to view  
channels through your cable box—  
usually 3 or 4. Consult your cable  
boxs instruction book or your cable  
company if you are not sure. Choose  
0 to use VIDEO INPUT.  
The last screen comes up when  
youve successfully finished the  
GUIDE Plus+ setup.  
Re m e m b e r:  
Leave your cable box turned ON to download program  
information. Downloading may take 24 hours.  
Press OK to leave the GUIDE Plus+ Setup and return to the TVs Main  
Menu. See the section Features and Controlsfor more details about  
the GUIDE Plus+ system.  
To Get Out of the GUIDE Plus+ System:  
Press OK to exit the GUIDE Plus+ system and tune to the  
highlighted channel.  
Press GUIDE to exit the GUIDE Plus+ system and tune to the channel  
displayed in the background.  
Press CLEAR to exit the GUIDE Plus+ system and go to the last  
channel you were watching.  
1 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
TV/VCR MAIN MENU  
St e p 9: Se t Up t h e r e st o f t h e TV/ VCR  
1 Screen  
2 Time  
3
SCREEN  
Select the Language  
4
1 Picture Quality  
5
This feature lets you select English, Spanish, or French as the language  
for your on-screen displays.  
2 Closed Captioning  
6
3 Menu Language: English  
(Idioma/Langue)  
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 1 to display the Screen menu.  
0
3. Press 3 to toggle the menu language between English, Spanish and  
French. The default menu language when you first turn on the  
0 Exit  
TV/VCR is English.  
TV/VCR MAIN MENU  
Put Channels into Memory (Auto Channel Search)  
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 5 to display the Setup menu.  
1 Screen  
2 Time  
3
SETUP  
4
1 Auto Channel Search  
5
3. Press 1 to start Auto Channel Search.  
2 Add/Remove Channels  
6
AUTO CHANNEL SEARCH  
3
4. Allow the TV/VCR to search for all channels. Pressing any buttons  
during Auto Channel Search will stop the search and only some  
channels will be in the TV/VCRs memory. When the search is  
finished the TV/VCR will automatically tune to the first channel in  
the channel memory list.  
4
5
0
6
Now scanning channel 14  
0
Press any key to cancel  
1 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
Set the Signal Type (Optional)  
TV/VCR MAIN MENU  
Note that if you have set up the GUIDE Plus+ system, Signal Type will  
not be available.  
1 Screen  
2 Time  
3
SETUP  
4
1 Auto Channel Search  
5
The TV/VCR automatically selects the signal type (cable or antenna)  
when you run the Auto Channel Search. If you want to change the  
signal type, follow the directions below.  
2 Add/Remove Channels  
6
3 Auto Repeat  
4 Auto Play:  
ON  
5 GUIDE Plus+ Setup  
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 5 to display the Setup menu.  
0
6 Signal Type:  
0 Exit  
CABLE  
3. Press 5 to toggle the Signal Type between Antenna and Cable.  
After changing the Signal Type, you may need to re-enter the  
channel number you are trying to receive.  
After changing the Signal Type, you may need to run the Auto  
Channel Search again.  
Add or Remove Channels from the TV/VCR’s Memory  
TV/VCR MAIN MENU  
This feature is not available if you are using a cable box and have set  
up the GUIDE Plus+ system, regardless of whether or not you use the  
GUIDE Plus+ system.  
1 Screen  
2 Time  
3
SETUP  
4
1 Auto Channel Search  
5
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 5 to display the Setup menu.  
2 Add/Remove Channels  
6
ADD REMOVE CHANNELS  
3
4
Channel  
10  
5
0
is presently  
ADDED  
6
3. Press 2 to display the Add/Remove Channels screen.  
4. Follow the directions on the screen to add or remove a channel.  
0
5. Add or remove more channels by entering the channel number or  
pressing CH ^ or v.  
Press CLEAR to remove  
Press MENU to exit  
1 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se t u p a n d Co n n e c t io n s  
Set the Time and Date (Clock)  
TV/VCR MAIN MENU  
1 Screen  
2 Time  
3 Timer Recordings  
Note that if you have set up the GUIDE Plus+ system, the Time menu will  
not appear. Note that the only time you need to set the clock is when  
youre not using cable (or a cable box). To set the clock:  
TIME  
1 Sleep Timer  
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 2 to display the Time menu.  
2 Wake-up Timer  
3 Set Time and Date  
SET TIME AND DATE  
Time --:-- -  
(hh:mm)  
3. Press 1 to display the Set Time and Date screen.  
4. Use the number buttons on the remote to enter the time.  
Date: --/--/--  
Press 0 before 1; 0 is added automatically before all other  
numbers. Press 1 for AM or 2 for PM. Example: For a time of  
1:07 PM, press 0, then 1, then 0, then 7, then 2.  
Press MENU to cancel  
5. Use the number buttons on the remote to enter the date.  
The day of the week will automatically appear after you enter  
the year.  
If you have set up the GUIDE Plus+  
system, the Time menu will not appear.  
Press CLEAR on the remote at any time to change incorrect  
entries.  
6. Press MENU on the remote to start the clock.  
To exit and return to TV viewing, follow the on-screen instructions.  
To display the time and date, press INFO on the remote.  
1 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usin g t h e Re m o t e  
Usin g y o u r Un iv e r sa l Re m o t e  
Se t u p a n d c o n n e c t io n s  
1
2
3
Thissectiondefinesthebuttonsoftheremoteandhowto  
programittocontrolothercomponents.  
Theuniversalremotecanbeprogrammedtocontrolmost  
brandsofremotecontrollableVCRs,satellitereceivers,and  
cableboxes.IfyouhaveanRCA,GE,orPROSCAN  
c omponent ,y oupro babl ydontneedt oprogramita  
Usin g t h e Re m o t e  
tall.  
O p e r a t in g In st r u c t io n s  
Fe a t u r e s a n d Co n t r o l s  
4
Re f e r e n c e  
5
1 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usin g t h e Re m o t e  
Re m o t e Co n t r o l Bu t t o n s  
LED  
ONOFF When in TV/VCR mode, turns the TV/VCR on and off. If in  
another device mode (VCR, DVD, Satellite, etc.) and programmed, will  
turn the device on and off. When pressed twice within two seconds, all  
devices that are on will be turned off (this feature only works with most  
RCA, GE, and PROSCAN products).  
ONOFF  
VCR1  
DVD  
TV  
VCR1 Puts the remote in VCR mode.  
TV Turns on the TV/VCR and puts the remote in TV/VCR mode.  
DVD Puts the remote in DVD mode.  
AUX SAT•CABLE  
VCR2  
VCR2 Puts the remote in VCR2 mode.  
MUTE  
SEARCH  
LED (Lig h t Em it t in g Dio d e ) Indicates programming mode when  
programming the remote.  
CH  
+
AUX Turns on the component you have programmed it to control.  
SATCABLE Puts the remote in SATCABLE mode. The SATCABLE  
button will not function properly without first completing the GUIDE  
Plus+ system setup procedures.  
CH  
SPEED  
GUIDE  
GO BACK  
INFO  
MUTE Reduces the TV/VCRs volume to its minimum level. When  
pressed again, restores the volume.  
SEARCH Advances the tape approximately 60 seconds. Also displays  
Index, Zero, and Blank search screens when tape is inserted in the  
TV/VCR.  
OK  
CH ^ a n d v (Ch a n n e l Up a n d Do w n ) Scans up or down through the  
channel list. Press once to change the channel up or down; press and  
hold to continue changing channels. During tape playback, pressing  
CH ^ or v adjusts tracking.  
MENU  
CLEAR  
VOL < a n d > (Vo lu m e Do w n a n d Up ) Decreases or increases the  
TV/VCRs volume.  
1
2
5
8
0
3
6
9
SPEED (Ta p e Sp e e d ) Selects a recording speed (SP, LP, or SLP). See the  
section Recording Featuresfor more details, including definitions of  
SP, LP, and SLP.  
4
7
GO BACK Returns you to the previous channel.  
INPUT  
ANTENNA  
Lig h t Ico n Lights some of the remote buttons. The buttons remain lit  
as long as any button is pressed within approximately four seconds of  
the last button pressed. The light times out if no buttons are pressed,  
which conserves the life of your batteries. If the light times out, simply  
press the button to turn it on again.  
REVERSE  
REC•VCR+  
PLAY  
STOP  
FORWARD  
PAUSE  
GUIDE Brings up and exits the GUIDE Plus+ system. In TV and VCR  
modes, brings up available on-screen guides (RCA, GE, and PROSCAN  
products only).  
- TRACKING +  
EDIT FR. ADV  
INFO Brings up channel information that display the TV/VCRs current  
status. Press again to clear the display. Also brings up the time counter  
when a tape is inserted.  
Arro w s Used to point to different items in the menu system. Also used  
to adjust the menu controls.  
OK Selects highlighted items or returns you to the previous menu.  
MENU Displays the TV/VCR Main Menu. Advances to next program  
during program review. When in VCR mode, it functions as a PROGRAM  
button.  
1 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usin g t h e Re m o t e  
CLEAR Removes any menu or display from the screen and returns  
you to TV viewing. Also exits the GUIDE Plus+ menu system. Allows  
you to change menu entries or clear a timer recording. Resets time  
counter to 0:00:00 when displayed.  
Nu m b e r Bu t t o n s (0-9) Enters channel numbers, digits for  
programming the remote, and time settings directly though the  
remote control. To enter a two-digit channel, press the two digits.  
To enter a three-digit channel, press and hold the first digit, release,  
then add the second two. For example: to tune to channel 123, press  
and hold 1, release, press 2, then 3.  
INPUT In TV/VCR mode, press to toggle through the available input  
sources (VIDEO 1, VIDEO 2, current channel).  
ANTENNA Functions as TV/VCR button in VCR mode and  
TV/receiver button in SATCABLE mode.  
REVERSE Rewinds the tape when the TV/VCR is stopped. Searches  
the picture in reverse during playback.  
PLAY Plays a tape.  
FORWARD Fast forwards the tape when the TV/VCR is stopped.  
Searches the picture in forward motion during playback.  
RECVCR+ Starts TV/VCR recording. Used for express recording.  
When in the GUIDE Plus+ system, pressing this button brings up the  
one-button recording screen. When not in the GUIDE Plus+ system,  
pressing this button will record the program you are currently  
viewing; however, if you have set a GUIDE Plus+ system-timed  
recording, that recording will interrupt the TV/VCR recording.  
STOP Stops functions such as record, play, rewind, fast forward,  
and pause.  
PAUSE Pauses the tape during playback. Pauses the tape during  
recording to prevent recording of unwanted scenes.  
TRACKING - a n d + (Tra ckin g Do w n a n d Up ) Lets you manually  
adjust tracking to reduce the streaks that may appear in the picture  
during playback.  
EDIT Pressing EDIT during playback pauses the tape. Press again to  
resume playback. Also, if FR. ADV is pressed, the tape advances  
frame-by-frame. One way to resume playback is to press EDIT.  
FR. ADV (Fra m e Ad va n ce ) Fast forwards the tape through a  
commercial when a tape is playing. Advances the tape one video  
frame at a time when the tape is paused.  
Modes of Operation  
Usin g t h e IN PUT Bu t t o n  
Because this universal remote can  
control several different components  
(cable box, another VCR, etc.), it uses  
operational modes triggered by the  
component buttons. For example if you  
w ant the remote to control the TV/VCR,  
you w ould press the TV button to put  
the remote into TV mode before you  
could control the TV/VCR.  
Use the INPUT button to toggle through the available input sources  
and view the component you have connected to the TV/VCR.  
1. Press TV to place the remote in TV mode. Make sure that the  
component you want to view is turned on.  
2. Press INPUT to tune to an available input source.  
3. Continue to press INPUT to scroll through the input sources.  
1 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usin g t h e Re m o t e  
Pr o g r a m m in g t h e Re m o t e  
The universal remote can be programmed to control most brands of  
remote controllable VCRs, satellite receivers, and cable boxes. The  
remote is already programmed to control most RCA, GE, and PROSCAN  
TVs, VCRs, DVD players, laserdisc players, and satellite receivers.  
Te st in g t h e Re m o t e  
To determine whether the universal remote needs to be programmed,  
turn a device ON, such as a DVD player, point the remote at the DVD  
player, and press the DVD button. Then press ONOFF or CH ^ or v to see  
if the DVD player responds to the remote commands. If not, the remote  
needs to be programmed.  
ONOFF  
VCR1  
TV  
DVD VCR2  
AUX SAT•CABLE  
Using Automatic Code Search  
The following instructions can be used to program the remote to control  
each of the devices connected to your TV. If you want to exit the  
automatic code search without programming any of your devices, press  
and hold CLEAR until the LED turns off.  
MUTE  
SEARCH  
CH  
+
Note that the automatic code search will not work with the AUX button.  
To program the remote using automatic code search:  
CH  
SPEED  
GUIDE  
GO BACK  
INFO  
1. Turn on the device you want to control (VCR, SAT, etc.).  
2. Press and hold the button you want to program (VCR1, VCR2, etc.).  
While holding the device button, press and hold ONOFF until the  
red light on the remote turns on, then release both buttons.  
OK  
3. Press and release PLAY, then wait 5 seconds or until the LED stops  
flashing.  
MENU  
CLEAR  
1
2
5
8
0
3
6
9
At this point the remote is searching for the correct code to  
program. If, after 5 seconds, the device you want to control does  
not turn off, press PLAY again to tell the remote to search the next  
set of codes.  
4
7
INPUT  
ANTENNA  
Continue pressing PLAY until the device turns off or you have  
searched through all of the codes. There are 20 total sets of codes. If  
the device does not turn off after pressing PLAY 20 times, then the  
remote cannot control that particular device.  
REVERSE  
REC•VCR+  
PLAY  
STOP  
FORWARD  
PAUSE  
If the device you want to control does turn off:  
- TRACKING +  
EDIT FR. ADV  
1. Press and release REVERSE, then wait 2 seconds. Repeat this step  
until the device turns back on.  
2. To finish, press and hold STOP until the red light on the remote  
turns off.  
1 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usin g t h e Re m o t e  
Using Direct Entry  
1. Turn on the component to be programmed.  
2. Look up the brand and code number(s) for the component on the  
code list on the last page of this section, Using the Remote.”  
3. Press and hold the appropriate component button (VCR1, DVD,  
VCR2, AUX, SATCABLE).  
4. While holding the component button, enter the code from the code  
list.  
5. Release the component button, and then press ONOFF to see if the  
component responds to the remote commands. If it doesnt, try  
pressing the component button and then ONOFF again.  
6. If you get no response, repeat these steps using the next code listed  
for your brand, until the component responds to the remote  
commands.  
Usin g t h e Re m o t e t o Co n t r o l a De v ic e  
Once the remote has been programmed successfully, you are ready to  
use it to control your devices.  
To operate the device:  
1. Press the device button (TV, VCR1, VCR2, DVD, AUX, or SATCABLE)  
to set the remote to control the device. Note that the SATCABLE  
button will only work if you have set up the GUIDE Plus+ system and  
are using a cable box.  
2. Press ONOFF to turn the device ON or OFF.  
3. Use the remote buttons that apply to that device.  
M o d e s o f Op e r a t io n  
Because this universal remote can control several different components  
(DVD player, VCR, cable box, etc.) it uses operational modes triggered by  
the component buttons. For example, if you want the remote to control  
the TV, you would press the TV button to put the remote into TV mode  
before you could control the TV.  
1 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usin g t h e Re m o t e  
Colour Voice .............................................................. 5012, 5013  
Comtronics ................................................................ 5014, 5015  
Contec ................................................................................... 5016  
Eastern ................................................................................... 5017  
Garrard .................................................................................. 5011  
GC Electronics ..................................................................... 5009  
Gemini ............................................................. 5018, 5019, 5049  
General Instrument ............................................................ 5003  
Hamlin ........................................ 5020, 5021, 5022, 5035, 5045  
Hitachi .................................................................................... 5003  
Hytex...................................................................................... 5002  
Jasco ....................................................................................... 5011  
Jerrold ........ 5003, 5005, 5007,5018, 5023, 5024, 5046, 5053  
Magnavox ............................................................................... 5025  
Memorex ............................................................................... 5026  
Movie Time ..................................................... 5002, 5027, 5028  
NSC .................................................................. 5002, 5027, 5028  
Oak .................................................................... 5002,5016, 5029  
Panasonic .................................................................... 5048, 5052  
Paragon .................................................................................. 5026  
Philips ........ 5011, 5012, 5013, 5019, 5025, 5030, 5031, 5032  
Pioneer ........................................................................ 5033, 5034  
Pulsar ...................................................................................... 5026  
RCA .................................................................. 5047, 5049, 5052  
Realistic ....................................................................... 5009, 5049  
Regal ............................................................................ 5022, 5035  
Regency ................................................................................. 5017  
Rembrandt ............................................................................ 5003  
Runco ..................................................................................... 5026  
Samsung ...................................................................... 5014, 5034  
Scientific Atlanta.................................. 5006, 5036, 5037, 5038  
Signal............................................................................ 5014, 5018  
Signature ................................................................................ 5003  
SL Marx .................................................................................. 5014  
Sprucer .................................................................................. 5052  
Starcom ............................................................ 5007, 5018, 5053  
Stargate ....................................................................... 5014, 5018  
Starquest ................................................................................ 5018  
Tandy ...................................................................................... 5040  
Teleview ................................................................................. 5014  
Tocom .............................................................. 5004, 5023, 5041  
Toshiba ................................................................................... 5026  
Tusa ......................................................................................... 5018  
TV86 ....................................................................................... 5027  
Unika ................................................................ 5008, 5009, 5011  
United Artists ....................................................................... 5002  
United Cable ........................................................................ 5053  
Universal ............................................... 5008, 5009, 5010, 5011  
Videoway ............................................................................... 5044  
Viewstar ................................................ 5015, 5025, 5027, 5040  
Zenith ............................................................... 5026, 5050, 5051  
Motorola ..................................................................... 2021,2131  
VCRs  
MTC .................................................................. 2002, 2013, 2026  
Multitech ......................... 2002, 2013, 2016, 2026, 2053, 2061  
NEC ............................................ 2009, 2010, 2011, 2016, 2018,  
............................... 2058, 2064, 2076, 2078, 2079, 2111, 2123  
Nikko ....................................................................................... 2014  
Noblex .................................................................................... 2013  
Olympus ................................................................................. 2021  
Optimus ....................................................................... 2014, 2131  
Optonica................................................................................. 2096  
Orion ...................................................................................... 2035  
Panasonic ......................... 2021, 2022, 2109, 2125, 2126, 2127  
Pentax ......................................... 2016, 2055, 2056, 2107, 2120  
Pentex Research ................................................................... 2018  
Philco ...................................................... 2021, 2022, 2062, 2063  
Philips ..................................................... 2021, 2062, 2096, 2124  
Pilot ......................................................................................... 2014  
Pioneer ........................................ 2010, 2055, 2080, 2081, 2123  
Portland ................................................. 2016, 2017, 2019, 2110  
PROSCAN .................................................................. 2000, 2001  
Protec ...................................................................................... 2061  
Pulsar ....................................................................................... 2104  
Quarter .................................................................................. 2011  
Quartz..................................................................................... 2011  
Quasar .............................................................. 2021, 2022, 2125  
RCA ............................................ 2000, 2001, 2003, 2013, 2021,  
...................... 2055, 2056, 2082, 2083, 2084,2085, 2086,2087,  
..................... 2088, 2089, 2090, 2091, 2107, 2115, 2120, 2125  
Radioshack/Realistic ............................ 2002, 2011, 2013, 2014  
......... 2021, 2022, 2023, 2026, 2029, 2049, 2050, 2096, 2131  
Radix........................................................................................ 2014  
Randex .................................................................................... 2014  
Ricoh ....................................................................................... 2128  
Runco ...................................................................................... 2104  
Samsung ........................... 2005, 2013, 2015, 2033, 2053, 2112  
Sanky ............................................................................ 2131, 2104  
Sansui ..................................................... 2010, 2092, 2111, 2123  
Sanyo ................................................................. 2011, 2013, 2023  
Scott 2012, 2015, 2025, 2032, 2035, 2038, 2065, 2093, 2116  
Sears ........................................... 2011, 2014, 2021, 2023, 2048,  
................................ 2049, 2050, 2051, 2055, 2056, 2107, 2118  
Sharp ..................... 2002, 2017, 2029, 2094, 2095, 2096, 2131  
Shintom .................................................. 2004, 2056, 2061, 2098  
Shogun .................................................................................... 2013  
Signature .................................................................... 2002, 2131  
Singer ................................................................. 2021, 2061, 2128  
Sony .................................. 2002, 2004, 2098, 2099, 2119, 2128  
STS ................................................................................ 2021, 2107  
Sylvania....... 2002, 2021, 2022, 2026, 2062, 2063, 2065, 2124  
Symphonic ................................................................... 2002, 2026  
Tandy ............................................................................ 2002, 2011  
Tashiko .................................................................................... 2014  
Tatung ........................................................................... 2058, 2111  
TEAC ........................................... 2002, 2026, 2058, 2085, 2111  
Technics ....................................................................... 2021, 2109  
Teknika ............................. 2002, 2014, 2021, 2026, 2100, 2129  
TMK................................................................... 2013, 2024, 2047  
Toshiba .................. 2015, 2049, 2051, 2055, 2065, 2093, 2116  
ToteVision ................................................................... 2013, 2014  
Unitech ................................................................................... 2013  
Vector Research .................................. 2009, 2010, 2015, 2016  
Victor ...................................................................................... 2010  
Video Concepts ........................ 2009, 2010, 2015, 2016, 2113  
Videosonic ............................................................................. 2013  
Wards .................. , 2002, 2013, 2014, 2015, 2021, 2023, 2026,  
Admiral ................................................................................. 2131  
Adventura ............................................................................. 2026  
Aiko ....................................................................................... 2027  
Aiwa ............................................................................ 2002, 2026  
Akai ............ 2003, 2004, 2005, 2007, 2008, 2111,2112, 2113  
American High .................................................................... 2021  
Asha ....................................................................................... 2013  
Audio Dynamics ...................................................... 2009, 2010  
Audiovox .............................................................................. 2014  
Bell & Howell....................................................................... 2011  
Beaumark ............................................................................. 2013  
Broksonic .................................................................. 2012, 2025  
Calix ...................................................................................... 2014  
Candle .................. 2013, 2014, 2015, 2016, 2017, 2018, 2019  
Canon .............................................................. 2021, 2022, 2114  
Capehart .................................................................... 2020, 2110  
Carver ................................................................................... 2062  
CCE ............................................................................ 2027, 2061  
Citizen ....... 2013, 2014, 2015, 2016, 2017, 2018,2019,2027  
Colortyme ........................................................................... 2009  
Colt ........................................................................................ 2061  
Craig ..................................................... 2013, 2014, 2023, 2061  
Curtis-Mathes .................................... 2000, 2002, 2009, 2013,  
......................................... 2016, 2018, 2021, 2022, 2024, 2115  
Cybernex .............................................................................. 2013  
Daewoo .... 2015, 2017, 2019,2025, 2026, 2027, 2028, 2110  
Daytron ................................................................................. 2110  
Dbx ............................................................................. 2009, 2010  
Dimensia ............................................................................... 2000  
Dynatech ................................................................... 2002, 2026  
Electrohome ............................................................. 2014, 2029  
Electrophonic ...................................................................... 2014  
Emerson ......................................................... 2002, 2012,2014,  
..................... 2015, 2021, 2024, 2025,2026,2029, 2030, 2032,  
........ 2033, 2034, 2035, 2036, 2037, 2038, 2039, 2040, 2041,  
........ 2042, 2044, 2045, 2047, 2065, 2105, 2113, 2116, 2117,  
2130  
Fisher ......... 2011, 2023, 2048, 2049, 2050, 2051, 2052,2118  
Fuji .............................................................................. 2021, 2119  
Funai ........................................................................... 2002, 2026  
Garrard ................................................................................. 2026  
GE .............. 2000, 2001, 2013, 2021, 2022, 2053, 2115, 2120  
Goldstar .................................... 2009, 2014, 2018, 2054, 2121  
Gradiente ............................................................................. 2026  
Harley Davidson ................................................................. 2026  
Harman Kardon .................................................................. 2009  
Harwood .............................................................................. 2061  
Headquarter ........................................................................ 2011  
Hitachi ....... 2002, 2055, 2056, 2057, 2107, 2111, 2120, 2122  
HI-Q ...................................................................................... 2023  
Instant Replay ...................................................................... 2021  
JCL ......................................................................................... 2021  
JC Penney ..................... 2009, 2010, 2011, 2013, 2014, 2021,  
.................. 2022, 2055, 2056, 2058, 2059, 2060, 2107, 2118  
Jensen .............................................................. 2055, 2056, 2111  
JVC ........................ 2009, 2010, 2011, 2018, 2058, 2111, 2123  
Kenwood .. 2009, 2010, 2011, 2016, 2018, 2058, 2111,2123  
KLH ....................................................................................... 2061  
Kodak ......................................................................... 2014, 2021  
Lloyd ........................................................................... 2002, 2026  
Logik ...................................................................................... 2061  
LXI ......................................................................................... 2014  
Magnavox ............. 2021, 2022, 2062, 2063, 2104, 2108, 2124  
Magnin ................................................................................... 2013  
Marantz .......................................................... 2009, 2010, 2011,  
.......................................... 2016, 2018, 2021, 2058, 2062,2064  
Marta ..................................................................................... 2014  
Masushita .............................................................................. 2021  
MEI ......................................................................................... 2021  
Memorex .................................................................. 2002, 2011,  
............................. 2013, 2014, 2021, 2023, 2026, 2104, 2131  
MGA ................................................................ 2029, 2065, 2113  
MGN Technology ................................................................ 2013  
Midland ................................................................................. 2053  
Minolta ............................................................ 2055, 2056, 2107  
Mitsubishi ........... 2029, 2055, 2056, 2065, 2066, 2067, 2069,  
.................. 2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123  
MontgomeryWard .................................................. 2075, 2131  
Satellite Receivers  
Chapparal ................................................................... 5056, 5057  
Drake .......................................................................... 5058, 5059  
GE ........................................................................................... 5000  
General Instuments....................................... 5060, 5061, 5062  
Panasonic ............................................................................... 5075  
Primestar ............................................................................... 5076  
PROSCAN ............................................................................ 5000  
RCA ........................................................................................ 5000  
Realistic .................................................................................. 5063  
Sony ........................................................................................ 5072  
STS1 ........................................................................................ 5064  
STS2 ........................................................................................ 5065  
STS3 ........................................................................................ 5066  
STS4 ........................................................................................ 5067  
Toshiba ................................................................................... 5068  
Toshiba ................................................................................... 5073  
Uniden.................................................................................... 5069  
2029, 2055, 2056, 2061, 2096, 2101, 2102, 2103, 2107, 2116,  
2131  
XR-1000 ........................................................... 2021, 2026, 2061  
Yamaha ............................. 2009, 2010, 2011, 2018, 2058, 2111  
Zenith .......................................... 2004, 2098, 2104, 2119, 2128  
Cable Boxes  
Audio  
ABC ....................... 5002, 5003, 5004, 5005, 5006, 5007, 5053  
Antronix ...................................................................... 5008, 5009  
Archer .................................................... 5008, 5009, 5010, 5011  
Cabletenna ............................................................................. 5008  
Cableview ............................................................................... 5008  
Century .................................................................................. 5011  
Citizen ..................................................................................... 5011  
(For RCA and Dimensia brands only)  
AM/FM ................................................................................... 4003  
Aux ......................................................................................... 4004  
Phono ..................................................................................... 4005  
CD .......................................................................................... 4007  
Tape ........................................................................................ 4006  
2 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
Se t u p a n d c o n n e c t io n s  
Usin g y o u r TV/ VCR  
1
2
3
ThissectionwalksyouthroughallthethingsyourTV/VCRcan  
do.Itincludesinformationon:  
Playingatape.  
Usingtheplaybackfeatures.  
Recording.  
Usin g t h e Re m o t e  
Copyingandeditingtapes.  
O p e r a t in g In st r u c t io n s  
Usin g t h e r e m o t e  
Usin g t h e r e m o t e  
Fe atur es andCont rols  
4
Re f e r e n c e  
5
2 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
H o w t o Pl a y a Ta p e  
PLAY  
0:00:00  
1. Insert a tape in the TV/VCR.  
The TV/VCR automatically turns on. The tape automatically  
begins to play if the safety tab on the cassette has been  
removed and the Auto Play feature has been turned on.  
2. Press PLAY, if necessary. The word Play and the time counter  
appear on the screen.  
3. If necessary, while the tape is playing, press TRACKING + or - on  
the remote or CH ^ or v on the TV/VCR to remove any streaks  
from the picture.  
4. Press STOP on the remote or STOP/EJECT on the TV/VCR to stop  
playback.  
W
AKE  
UP  
T
I
ME  
R
STO P  
EJECT  
REC  
REW  
F
FW D  
VO  
L-  
VO  
L+  
CH  
CH  
PO W ER  
PLAY  
PA U SE  
AUDIO  
IN  
V
I
DE  
O
IN  
5. Press REW on the TV/VCR or REVERSE on the remote to rewind  
the tape. If the VCR is playing a tape, the TV/VCR will search  
backwards through the tape. If the TV/VCR is not playing a  
tape, the tape will rewind back to its start.  
Safety Tab  
After the tape reaches its end during playback, it will  
automatically rewind back to the beginning of the tape  
and eject the tape.  
Pressing the remotes ONOFF button while the tape is  
rewinding will not stop the tape. The tape will continue to  
rewind until it reaches its beginning, and then the TV/VCR  
will turn off.  
If the GUIDE Plus+ system appears w hen a  
tape is inserted, press the GUIDE or CLEAR  
button on the remote. The GUIDE Plus+  
system w ill disappear in approximately  
one minute if you do not press any  
button.  
6. Press FORWARD on the remote to advance the tape. If the VCR  
is playing a tape when the FORWARD button is pressed, the TV/  
VCR will search forward through the tape.  
7. Press STOP/EJECT on the TV/VCR or STOP on the remote to eject  
the tape once it is completely rewound.  
Note that a cassette may be ejected even if the power is turned off.  
2 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
Usin g t h e Pl a y b a c k Fe a t u r e s  
Pause  
This feature pauses the tape during playback and allows you to examine  
the details of the scene. Pause works best with tapes recorded in SLP  
speed.  
1. Press PAUSE during playback to pause the action. The TV/VCR will  
automatically switch from pause to stop after a few minutes to  
prevent tape wear.  
ONOFF  
VCR1  
TV  
2. Press PAUSE or PLAY to return to normal playback.  
DVD VCR2  
AUX SAT•CABLE  
Frame Advance  
MUTE  
SEARCH  
Frame advance lets you view one frame at a time while in the PAUSE  
mode. Frame advance works best with tapes recorded in SLP speed.  
CH  
+
1. Press PAUSE during playback to pause the action.  
2. Press FR. ADV on the remote each time you want to view the next  
frame of the scene.  
CH  
SPEED  
GUIDE  
GO BACK  
INFO  
Press and hold FR. ADV on the remote to view the tape frame-by-  
frame.  
OK  
3. Press PAUSE or PLAY to return to normal playback.  
Picture Search  
MENU  
CLEAR  
You can visually search a picture during pause mode. Sound is turned  
off during picture search. Picture search works best for tapes recorded  
in SLP speed.  
1
2
5
8
0
3
6
9
4
7
1. During playback, press FORWARD on the remote to search forward  
or REVERSE to search in reverse.  
INPUT  
ANTENNA  
2. Press PLAY to return to normal playback.  
REVERSE  
REC•VCR+  
PLAY  
STOP  
FORWARD  
Slow Motion (only available on model T19067)  
PAUSE  
You can view the picture in slow motion during PAUSE mode. There are  
three slow-motion speeds. Sound is turned off during slow-motion  
playback.  
- TRACKING +  
EDIT FR. ADV  
1. Press PAUSE.  
2. Press and hold FR. ADV to begin slow motion.  
Press FR. ADV again for the faster slow-motion speed.  
Press FR. ADV a third time for the fastest slow-motion speed.  
3. Press PLAY to return to normal playback or press PAUSE to return to  
pause mode.  
The TV/VCR will automatically switch from slow-motion playback to stop  
after a few minutes to prevent tape wear.  
2 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
Automatic Tracking  
The TV/VCR has automatic tracking which adjusts the picture when  
playing a tape that was recorded on another VCR. Automatic tracking is  
turned on whenever a tape is inserted or the TV/VCRs power is  
turned on.  
ONOFF  
VCR1  
TV  
DVD VCR2  
AUX SAT•CABLE  
Manual Tracking  
MUTE  
SEARCH  
Occasionally, you may need to manually adjust tracking on a tape  
recorded on a different VCR or camcorder. Tracking is used when  
playing a tape. It has no effect during recording.  
CH  
+
When streaks or snow appear in the picture during normal playback  
or slow motion, press TRACKING + or - on the remote or CH ^ or v  
on the TV/VCR for the best possible picture.  
CH  
SPEED  
GUIDE  
GO BACK  
INFO  
To return to automatic tracking the tape must be removed from the  
VCR and re-inserted.  
OK  
Time Counter  
MENU  
CLEAR  
The time counter helps locate the beginning or end of programs you  
taped. The time counter automatically resets to 0:00:00 whenever a  
tape is inserted, or when CLEAR is pressed while the time counter is  
displayed.  
1
2
5
8
0
3
6
9
4
7
For example, if a 30-minute program was recorded at the beginning of  
the tape and you wanted to record another program after it, you  
should:  
INPUT  
ANTENNA  
REVERSE  
REC•VCR+  
PLAY  
STOP  
FORWARD  
1. Insert the pre-recorded tape.  
2. Press INFO twice to display the time counter and fast forward the  
tape until 30 minutes appears on the screen. Then you can begin  
recording a second program.  
PAUSE  
- TRACKING +  
EDIT FR. ADV  
0:30:00  
Hours  
Minutes  
Seconds  
This is the approximate end of the program and you can begin recording  
at this spot.  
3. Press INFO again or eject the tape to remove the time counter from  
the screen.  
Commercial Scan  
This is useful for skipping commercials or short program segments. Press  
SEARCH during playback to advance the tape approximately 60 seconds.  
2 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
Auto Play Feature  
TV/VCR MAIN MENU  
This feature enables the TV/VCR to automatically start playing a tape  
when it is inserted. (The safety tab on the tape must be removed.)  
1 Screen  
2 Time  
3
SETUP  
4
1 Auto Channel Search  
5
1. Press MENU to display the TV/VCR Main Menu.  
2. Press 5 to display the Setup menu.  
2 Add/Remove Channels  
6
3 Auto Repeat  
4 Auto Play:  
ON  
3. Press 4 to change the Auto Play setting.  
The Auto Play feature is set to On at the factory.  
5 GUIDE Plus+ Setup  
0
6 Signal Type:  
0 Exit  
CABLE  
Select On if you want a tape with its safety tab removed to start  
playing automatically.  
Select Off if you do not want a tape with its safety tab removed  
to start playing automatically.  
Auto Repeat Feature  
TV/VCR MAIN MENU  
This feature tells the TV/VCR to play a tape (or part of a tape)  
continuously. The TV/VCR will automatically rewind the tape, or a  
selected portion of the tape, and play it repeatedly.  
1 Screen  
2 Time  
3
SETUP  
4
1 Auto Channel Search  
5
2 Add/Remove Channels  
6
3 Auto Repeat  
1. Using REVERSE, FORWARD, or PLAY on the remote, go to the place  
on the tape that you want to be the b e g in n in g of the section that  
automatically repeats. Reset the time counter to 0:00:00 by pressing  
INFO, then CLEAR.  
4 Auto Play:  
ON  
AUTO REPEAT  
5
0
Set the length of time you  
want the tape to play in a  
repeating loop  
2. Using FORWARD or PLAY on the remote, go to the place on the  
tape that you want to be the e n d of the section that plays  
continuously. Remember the numbers on the time counter. (2:55 is  
the end time for Auto Repeat in the example to the right.)  
0
Loop from 0:00 to 2:55  
(h:mm)  
Press MENU to exit  
3. Press MENU to display the TV/VCR Main Menu.  
4. Press 5 to display the Setup menu.  
5. Press 3 to display the Auto Repeat menu.  
6. Using the number buttons, enter the amount of time you want the  
tape to repeat (the number from Step 2). In the example at right,  
the section that the TV/VCR will automatically repeat is 2:55two  
hours, 55 minutes long.  
To Cancel Auto Repeat  
Press MENU, then 5, then 3, and then CLEAR.  
2 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
Index Search  
The TV/VCR automatically records index marks on the tape each time  
you begin recording. During playback you can locate the program you  
want to play by the number of index marks. Your TV/VCR has two  
index playback features. You can select a specific index number or  
search by scan and play.  
INDEX SEARCH  
Press REW or FF to begin  
search  
OR  
Enter a specific  
Index Number  
--  
To Se le ct Sca n a n d Pla y In d e x Pla yb a ck:  
1. Insert the pre-recorded tape and press STOP.  
2. Press SEARCH on the remote to display the Index Search screen.  
INDEX SEARCH  
Scanning...  
3. Press FORWARD on the remote to scan forward or REW to scan in  
reverse.  
Index Number  
01  
When the TV/VCR locates an index mark, it will stop and play a  
few seconds of the program following the mark.  
Press STOP to cancel  
4. At any time during the search, press PLAY to stop searching and  
begin playback, or press STOP to stop the search.  
If the beginning or end of the tape is reached during the search,  
the message End of tapeappears.  
To Se le ct a Sp e cific In d e x Nu m b e r fo r In d e x Pla yb a ck:  
1. Insert the pre-recorded tape and press STOP.  
2. Press SEARCH on the remote to display the Index Search screen.  
INDEX SEARCH  
Press REW or FF  
to begin search  
OR  
Enter a specific  
index number  
--  
3. Use the number buttons (0-9) on the remote to enter the number  
of the index mark for which you want the TV/VCR to search.  
4. Press FORWARD to search forward or REVERSE to search in  
reverse.  
When the TV/VCR locates the index mark, it will begin playback.  
When using index playback, the following index marks may be  
skipped by the TV/VCR:  
The mark closest to the current location on  
the tape.  
The mark at the beginning of a recorded segment that is five  
minutes or less.  
The mark at the beginning of the tape.  
2 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
Zero Search  
ZERO SEARCH  
This feature allows you to quickly return to a time counter reading of  
0:00:00. This is especially convenient when you want to watch a  
segment of the tape several times.  
Current tape counter is  
0:12:34  
Press REVERSE to go to  
0:00:00  
1. Insert the pre-recorded tape and press STOP.  
2. Press INFO on the remote twice to display only the time counter.  
Press SEARCH to exit  
3. Use PLAY, FORWARD, or REVERSE on the remote to locate the start  
of the segment you want to repeat.  
OR  
4. Press CLEAR to reset the time counter to 0:00:00.  
ZERO SEARCH  
5. Continue playing the tape and press STOP when you reach the end  
of the segment you want to repeat.  
Current tape counter is  
-0:12:34  
6. Press SEARCH twice to display the Zero Search screen. The current  
time counter is displayed.  
Press FORWARD to go to  
0:00:00  
7. Press REVERSE or FORWARD on the remote to return to 0:00:00.  
The tape rewinds or fast forwards to the 0:00:00 and begins  
playing.  
Press SEARCH to exit  
Blank Search  
The TV/VCR will search for blank portions of the tape that are more  
than six seconds in length.  
1. Insert the pre-recorded tape and press STOP.  
2. Press SEARCH on the remote three times to display the Blank  
Search screen.  
BLANK SEARCH  
Press FORWARD to begin searching  
for blank section of tape.  
Press SEARCH to exit  
3. Press FORWARD to begin searching for a segment that is at least  
six seconds of blank tape.  
4. Press STOP to stop Blank Search.  
2 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
Re c o r d in g Fe a t u r e s  
Recording Speeds  
Press SPEED to select a recording speed.  
Recording Time  
SLP  
SP (Standard Play) gives the best quality recording; consequently,  
fewer programs can be recorded on the tape. Most pre-recorded,  
rental tapes are recorded in SP.  
Cassette  
T-120  
T-160  
SP  
2 hours  
LP  
4 hours  
6 hours  
2 hrs 40 min 8 hours 5 hrs 20 min  
LP (Long Play) gives twice the recording time of tapes recorded in  
SP. Special effects such as pause, slow motion, picture search, and  
frame advance are not recommended in this speed.  
SLP (Super Long Play) gives three times the recording time of tapes  
recorded in SP. Special effects such as pause, slow motion, picture  
search, and frame advance work in this speed.  
SLP  
Recording Pause  
This feature allows you to prevent recording short passages of  
unwanted material.  
Tape Speed Indicator  
Press PAUSE during recording to temporarily stop and start  
recording. While the tape is paused, the front panel indicator light  
inside the REC button will flash. The TV/VCR will automatically  
switch from pause to stop after a few minutes to prevent tape wear.  
Automatic Head Cleaner  
The TV/VCR has an automatic head cleaner system. When a cassette is  
inserted, the head cleaning system is activated. This system minimizes  
the need for accessory cleaners or a visit to a service center.  
Types of Recordings  
Your TV/VCR provides different ways to record which are explained in  
the following sections:  
Basic Recording  
Express Recording  
Timer Recording  
Copying and Editing Tapes  
2 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
Ba sic Re c o r d in g  
The GUIDE Plus+ system recording timer will override the VCR  
eight-event timer, and Sleep or Wake-up timers if you have set  
conflicting timed events in the GUIDE Plus+ system. If the VCR-timed  
recordings are already in progress, they will be interrupted and the  
GUIDE Plus+ system-timed recording will begin as scheduled.  
1. Insert a tape with safety tab in place. The TV/VCR will turn on.  
2. Press SPEED to select a recording speed. The tape speed indicator  
appears.  
3. Select the channel to be recorded.  
4. Press RECVCR+ on the remote to begin recording. The indicator  
light in the REC button on the front of the TV/VCR turns on during  
recording.  
5. Press STOP/EJECT on the TV/VCR or STOP on the remote to stop  
recording.  
Ex p r e ss Re c o r d in g  
RECORD LENGTH 0:00  
CH 04  
The GUIDE Plus+ system recording timer will override the VCR  
eight-event timer, and Sleep or Wake-up timers if you have set  
conflicting timed events in the GUIDE Plus+ system. If the VCR-timed  
recordings are already in progress, they will be interrupted and the  
GUIDE Plus+ system-timed recording will begin as scheduled.  
Express recording lets you record up to four hours or to the end of the  
tape without programming the timer. You can begin recording  
immediately. The TV/VCR will stop automatically at the end of the  
recording.  
Press REC to set length  
Each time you press RECORD, the  
recording time increases as show n below :  
To u se e xp re ss re co rd in g :  
1. Insert a tape with safety tab in place. The TV/VCR will turn on.  
2. Select the channel to be recorded.  
Pre ss RECORD  
0:30  
Re co rd in g Tim e  
(30 minutes)  
(One hour)  
3. Press SPEED to select a recording speed. You can also change the  
speed of the recording in progress.  
1:00  
1:30  
(One hour 30 min)  
(Two hours)  
4. Press RECVCR+ twice to activate express recording.  
2:00  
5. Press RECVCR+ repeatedly until the desired amount of recording  
3:00  
(Three hours)  
(Four hours)  
time is displayed.  
4:00  
6. During express recording, press RECVCR+ to display the time  
remaining on the screen. Press RECVCR+ again to increase the  
recording time. The TIMER indicator on the TV/VCRs front panel  
will light during express recording.  
0:00:00  
0:00  
(Normal record)  
(Turns off)  
2 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
To st o p a n e xp re ss re co rd in g in p ro g re ss:  
Press and hold STOP/EJECT on the TV/VCR or STOP on the remote to  
stop the express recording.  
TV/VCR MAIN MENU  
1 Screen  
2 Time  
OR —  
3 Timer Recordings  
4 Parental Controls  
Repeatedly press RECVCR+ until Record Length: 0:00 appears. The  
recording stops after a few seconds.  
TIMER RECORDINGS  
5
6
1 Create a New Program  
2 Review Existing Programs  
0
Tim e r Re c o r d in g  
How often should this program  
record?  
The GUIDE Plus+ system recording timer will override the VCR  
eight-event timer, and Sleep or Wake-up timers if you have set  
conflicting timed events in the GUIDE Plus+ system. If the VCR-timed  
recordings are already in progress, they will be interrupted and the  
GUIDE Plus+ system-timed recording will begin as scheduled.  
1 One time  
2 Daily (every day)  
3 Weekdays (M-F)  
4 Weekly (once per week)  
Program 1 (One Time)  
Channel  
Start time  
End time  
Start date  
Tape Speed  
08  
Timer recording lets you program the TV/VCR to record up to eight  
different programs. This is useful if you plan on being away from home  
for a long period of time. Before setting the timer, make sure that the  
clock is set correctly.  
02:10 PM  
03:35 PM  
02/12/00 Sat  
SLP  
To se t a t im e r re co rd in g :  
Press CLEAR to correct  
Press MENU to save  
1. Press MENU to display the TV/VCR Main Menu.  
2. Press 3 to display the Timer Recordings menu.  
3. Press 1 to Create a New Program.  
4. Press 1, 2, 3, or 4 to select the type of program.  
1
2
3
One time single program recorded once.  
Daily program recorded at same time every day.  
Weekdays program recorded at same time Monday through  
Friday.  
4
Weekly program recorded at same time once a week.  
5. Use the number buttons to enter the channel number, start time,  
end time, and start date of the recording.  
After you enter the start time, press 1 for AM or 2 for PM.  
Example: For a time of 5:07 PM, press 5, then 0, then 7, and  
then 2. Repeat for end time.  
Press CLEAR to correct an entry.  
6. Press SPEED to select a recording speed.  
7. Press MENU to save your program.  
4
-
H E A D  
8. Repeat steps 3 6 for additional programs.  
9. Insert a tape with safety tab intact before the recording is to begin.  
W
AKE  
UP  
T
I
ME  
R
STO P  
EJECT  
REC  
REW  
F
FW D  
V O  
L-  
V O  
L+  
CH  
CH  
PO W ER  
PL  
A
Y
PA U SE  
AUDIO  
IN  
V
I
DE  
O
IN  
The TIMER indicator lights in the TV/VCRs front panel.  
TIMER Indicator  
3 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
If you turn the TV/VCR off, the TIMER indicator will flash if  
there is no cassette in the TV/VCR or the safety tab is missing  
from the cassette.  
TV/VCR MAIN MENU  
1 Screen  
2 Time  
3 Timer Recordings  
4 Parental Controls  
10. If using a cable box, turn it on and tune it to the channel you want  
to record before time for the recording to begin.  
TIMER RECORDINGs  
5
6
1 Create a New Program  
2 Review Existing Programs  
To ch e ck o r cle a r a t im e r re co rd in g :  
0
Program 1 (One Time)  
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 3 to display the Timer Recordings menu.  
3. Press 2 to Review Existing Programs.  
Channel  
Start Time  
End Time  
Start Date  
Tape Speed  
08  
02:10 PM  
03:35 PM  
02/12/00 Sat  
SLP  
4. Press CLEAR to erase a program.  
5. Press MENU to review the next program in sequence.  
6. After you have reviewed all of your programs press MENU to exit.  
To st o p a t im e r re co rd in g :  
Press CLEAR to erase  
Press MENU for next prog  
If it is a TV/VCR-timed recording, press and hold STOP/EJECT on the  
TV/VCR or STOP on the remote. A timer program in progress will be  
stopped. Only todays recording of a Daily, Weekdays, or Weekly  
program is canceled. The Daily, Weekdays, or Weekly program  
remains in the timer.  
VIDEO1  
If it is a GUIDE Plus+ system-timed recording, you cannot stop it  
using the remote or front panel. You must cancel the timer through  
the GUIDE Plus+ system.  
Co p y in g a n d Ed it in g Ta p e s  
Use another VCR or camcorder as the playback VCR and the TV/VCR as  
the recording VCR.  
1. Turn on the VCR or camcorder and the TV/VCR.  
2. Press 00 on TV/VCRs remote to select the line input (VIDEO 1 or  
VIDEO 2). Pressing 00 once tunes the TV/VCR to the AUDIO/VIDEO 1  
input jacks on the re a r of the TV/VCR. Pressing 00 twice tunes the  
TV/VCR to the AUDIO/VIDEO 2 input jacks on the fro n t of the  
TV/VCR.  
3. Insert the tape you want to copy into the playback VCR or  
camcorder. Insert a blank tape with safety tab intact into the  
TV/VCR.  
4. Start the playback VCR or camcorder playing. If the tape was not  
recorded on the playback VCR, streaks may appear and you may  
need to adjust the tracking. When you reach the place you want to  
begin copying, place the playback VCR or camcorder in play pause.  
5. Press RECORD, then PAUSE on the TV/VCRs remote.  
3 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O p e r a t in g In st r u c t io n s  
6. Press PAUSE on b o t h the VCR or camcorder and the TV/VCRs  
remote a t t h e sa m e t im e to begin copying the tape.  
7. Edit out segments that you do not want to copy by pressing PAUSE  
on the TV/VCRs remote to pause the tape. Then, locate the next  
segment you want to copy on the playback VCR or camcorder by  
using FORWARD, REVERSE, or PLAY. Press PAUSE on the playback  
VCR or camcorder. Press PAUSE a t t h e sa m e t im e o n b o t h the VCR  
or camcorder and the TV/VCRs remote to resume copying.  
The unauthorized recording of television  
programs and other materials may  
infringe upon the rights of others.  
8. Press STOP on b o t h the VCR or camcorder and the TV/VCRs remote  
when you are finished.  
3 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
USIN G t h e Fe a t u r e s a n d Co n t r o l s  
Se t u p a n d c o n n e c t io n s  
1
This section introduces you to the features and controls with  
which your TV/VCR is equipped. In this section, you will learn  
how to use:  
On-screen displays.  
The GUIDE Plus+ Menu system.  
Parental controls, including V-Chip rating limits.  
Usin g t h e Re m o t e  
2
3
O p e r a t in g In st r u c t io n s  
Fe a t u r e s a n d Co n t r o l s  
4
5
Re f e r e n c e  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Ch 08  
Usin g O n -Sc r e e n Disp l a y s  
Pressing INFO  
with no tape  
inserted:  
When you change channels, adjust volume, or use a VCR feature,  
on-screen displays appear to let you know the status of the TV/VCR.  
2/12/00 Sat 08:43AM SLP  
Ca l l in g Up O n -Sc r e e n Disp l a y s  
1. Press INFO to display the function, time counter, date, time, and  
tape speed. If you do not press INFO again, these displays will  
time out and disappear.  
STOP  
Ch 08  
0:00:00  
Pressing INFO  
once with  
2. Press INFO again:  
tape inserted:  
No t a p e in TV/VCR: Displays are removed.  
2/12/00 Sat 08:43AM SLP  
0:00:00  
Ta p e in TV/VCR: Time counter remains on screen, and will not  
time out. Press INFO again to remove the time counter.  
Pressing INFO  
twice with  
Ad j u st in g t h e Vid e o  
tape inserted:  
Use the SCREEN menu to adjust the picture for your personal preference.  
The TV/VCR will remember the settings you select.  
To Ad ju st Vid e o :  
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 1 to display the Screen menu.  
3. Press 1 to display the Picture Quality menu.  
4. Press CH ^ or v to select the function you want to adjust.  
Select Color to adjust color intensity.  
TV/VCR MAIN MENU  
1 Screen  
2 Time  
3
SCREEN  
4
1 Picture Quality  
5
Select Tint to adjust for natural flesh tones.  
Select Contr (contrast) to adjust picture contrast.  
Select Brite (brightness) to adjust picture brightness.  
Select Sharp (sharpness) to adjust picture sharpness.  
5. Press VOL < or > to adjust the function selected.  
Press CLEAR to reset the controls to factory defaults.  
2 Closed Captioning  
6
PICTURE QUALITY  
3
Color -.......|.............+  
Tint ......|...... .......+  
Contr .......|.............+  
Brite ......|..............+  
Sharp .......|.............+  
0
0
Use CH and VOL to adjust  
Press MENU to exit  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Ab o u t Cl o se d Ca p t io n in g  
The closed captioning feature displays the audio portion of a program as  
text on the TV screen. This is useful to the hearing impaired or anyone  
who wants to watch a program without sound.  
There are four types of closed captions: Caption 1, Caption 2, Text 1 and  
Text 2. Caption 1 displays the full translation of the primary language in  
your area. Caption 2 may be used as a second source for secondary  
languages. Text 1 and Text 2 display on-screen boxes containing the text  
of general information not necessarily related to the program being  
watched.  
TV/VCR MAIN MENU  
1 Screen  
2 Time  
SCREEN  
3
4
1 Picture Quality  
5
Closed captioning is not available on all channels. Check your TV  
program listings for CC (closed caption) broadcasts.  
2 Closed Captioning  
6
CLOSED CAPTIONING  
3
1 Display:  
OFF  
CAPTION 1  
2 Mode:  
0
To Vie w Cl o se d Ca p t io n s  
1. Press MENU on the remote to display TV/VCR Main Menu.  
2. Press 1 to display the Screen menu.  
0
0 Exit  
3. Press 2 to display the Closed Captioning menu.  
4. Press 1 to change the Display.  
There are three choices: Off, On, and On When Muted.  
Each time you press 1 the Display will change on the Closed  
Captioning menu.  
5. Press 2 to select the Mode.  
There are four choices: Caption 1, Caption 2, Text 1, and  
Text 2.  
Each time you press 2 the Mode will change on the Closed  
Captioning menu.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Ch 08  
Sleep Timer  
Usin g Sl e e p Tim e r  
0:30  
The sleep timer automatically turns the TV/VCR off after 30, 60, 90, or  
120 minutes.  
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 2 to display the Time menu.  
2/12/00 Sat 08:43AM SLP  
TV/VCR MAIN MENU  
3. Press 1 to display the Sleep Timer screen.  
4. Press CH ^ or v to select 30, 60, 90, or 120 minutes.  
While watching a program, press INFO to check the amount of  
time remaining before the TV turns off.  
1 Screen  
2 Time  
3
TIME  
4
5. To cancel the sleep timer, first display the Sleep Timer screen by  
repeating steps 1-4 above. Then, repeatedly press CH ^ or v until  
0:00is displayed on the screen.  
1 Sleep Timer  
5
2 Wake-Up Timer  
6
SLEEP TIMER  
Turn off TV in 0:00  
0
0
Wa k e -Up Tim e r  
Press Channel up or down to  
adjust timer.  
Press MENU to exit  
The timer turns the TV/VCR on at a desired time. You can set it to wake  
you up in the morning or remind you that a favorite program is about to  
start.  
1. Press MENU on the remote to display the TV/VCR Main Menu.  
2. Press 2 to display the Time menu.  
3. Press 2 to display the Wake-Up Timer menu.  
TV/VCR MAIN MENU  
4. Use the number buttons (0-9) to enter the channel number and  
time.  
1 Screen  
2 Time  
3
TIME  
4
After you enter the time, press 1 for AM or 2 for PM. Example:  
1 Sleep Timer  
5
2 Wake-Up Timer  
For a time of 5:07 PM, press 5, then 0, then 7, then 2.  
6
WAKE-UP TIMER  
Press GO BACK to correct an entry and CLEAR to clear the time.  
Channel --  
0
Time  
0
--:--  
WAKE-UP TIMER  
Channel 27  
Time 05:07  
Press GO BACK to correct  
Press CLEAR for --:--  
Press MENU to exit  
If you have set the sleep timer or w ake-up  
timer to activate anytime during a GUIDE  
Plus+ system-timed recording, the sleep  
timer or w ake-up timer w ill not activate.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
5. Press MENU to set the timer.  
The wake-up timer will turn on the TV/VCR every day. The  
WAKE-UP indicator light on the front panel is illuminated  
when the wake-up timer is set.  
Once the TV/VCR is turned on by the wake-up timer, the unit  
automatically turns off after 60 minutes if no buttons are  
pressed.  
No t e : When the wake-up timer turns on the TV/VCR, the  
volume level does not change from when the TV/VCR was last  
turned off.  
6. To cancel the wake-up timer, first display the Wake-Up Timer  
menu by repeating steps 1-3 above. Then, clear the setting by  
pressing CLEAR, and press MENU to exit. The timer is also  
canceled if MENU is pressed before step 4 is completed.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Pa r e n t a l Co n t r o l s a n d V-Ch ip  
The Parental Controls menu allows you to program your TV/VCR so that children cannot see certain programs.  
The first three choices in the Parental Controls menu involve a feature inside your TV/VCR called V-Chip which allows you to  
blockTV programs and movies based on violence, sex, or other content you may believe children should not view. In  
other words, it lets you program your TV so it will not display certain programs. Once you block programs, you or other  
adults are not limited to only parent-approved programs; you can unblockprograms by entering a password.  
The V-Chip inside your TV/VCR comes turned off,so if you choose not to implement it, you can just ignore it.  
When turned on,the V-Chip reads a code that most broadcasters send with programs. That code tells the V-Chip the  
programs age-based rating (TV-MA, TV-14, etc.) and content themes (Violence (V), Adult Language (L), etc.). If you have  
blocked the rating and/or content themes that the program contains, you will receive the message, This channel is not  
approved for viewing,when you turn to that particular channel. Broadcasters are not required to provide content themes,  
so programs received with no content themes will only be blocked if you block their age-based rating. You can also block  
out programs that have not been given a rating, and programs that are considered unratedbecause no code has been  
sent by the broadcaster.  
The age-based ratings and content themes you can block are listed in the table below.  
Age-Based Rating  
Description and Content Themes for Age-Based Ratings  
Mature Audience Only. This program is specifically designed to be viewed by adults and  
may be unsuitable for children under 17. It contains one or more of the following content  
themes: graphic violence (V), explicit sexual activity (S), or crude indecent language (L).  
TV-MA  
Parents Strongly Cautioned. This program contains some material that many parents would  
find unsuitable for children under 14. Parents are strongly urged to exercise greater care in  
monitoring this program and are cautioned against letting children under the age of 14 watch  
unattended. This program contains one or more of the following content themes: intense  
violence (V), intense sexual situations (S), strong coarse language (L), or intensely  
suggestive dialogue (D).  
TV-14  
Parental Guidance Suggested. This program contains material that parents may find  
unsuitable for younger children. Many parents may want to watch it with their younger  
children. The program contains one or more of the following content themes: moderate  
violence (V), some sexual situations (S), infrequent coarse language (L), or some  
suggestive dialogue (D).  
TV-PG  
General Audience. Most parents would find this program suitable for all ages. It contains  
little or no violence (V), no strong language (L) and little or no sexual dialogue (D) or  
situations (S).  
TV-G  
Directed to Children 7 years and older. This program is designed for children ages 7 and  
above. It may be more appropriate for children who have acquired the developmental skills  
needed to distinguish between make-believe and reality. Themes and elements in this  
program may include mild fantasy violence (FV) or comedic violence, or may frighten  
children under the age of 7.  
TV-Y7  
All Children. This program is designed to be appropriate for all children. The themes and  
elements in this program are designed for a young audience, including children from ages  
2-6. This program is not expected to frighten younger children.  
TV-Y  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Se t t in g TV Ra t in g Lim it s  
TV/VCR MAIN MENU  
1 Screen  
2 Time  
1. Press MENU on the remote to display the TV/VCR Main  
Menu.  
3 Timer Recordings  
4 Parental Controls  
5 Setup  
PARENTAL CONTROLS  
2. Press 4 to display Parental Controls menu.  
6
1 V-Chip Rating Limit  
3. Press 1 to display the V-Chip TV Rating Limit screen.  
V-CHIP RATING LIMIT  
0
4. Use the number buttons (1-7) to change the status of a TV  
program rating.  
1
2
3 4 5 6 7  
D L S V FV  
V V V  
Rating  
TV-MA  
Status  
View  
Remember, once you have set your limits, you must lock your  
Parental Controls settings for rating limits to take effect. See  
Lock/Unlock Parental Controls,later in this section.  
TV-MA V  
TV-14 V  
TV-PG V  
LSV  
DLSV  
DLSV  
TV-G V  
TV-Y7 VFV  
TV-Y V  
Press MENU to exit  
Pressing 0 on the remote w ill reset all  
ratings to View and V.  
Ra t in g St a t u s Fie ld  
Pressing 2 lets you select  
whether the status of the  
age-based rating limit to the  
left is View or Block.  
V-CHIP RATING LIMIT  
Ra t in g Fie ld  
Co n t e n t St a t u s Fie ld s  
1
2
3 4 5 6 7  
Pressing 1 lets you  
select from a list of  
age-based ratings.  
Displays which content themes are  
applicable to the age-based rating  
selected in the Rating Field. Pressing  
3-7 lets you toggle between View (V)  
and Block (B) for the following fields:  
Suggestive Dialog (D), Language (L),  
Sexual Situations (S), Violence (V), and  
Fantasy Violence (FV).  
Rating Status D L S V FV  
TV-MA View  
V V V  
TV-MA V LSV  
TV-14 V DLSV  
TV-PG V DLSV  
TV-G V  
TV-Y7 VFV  
TV-Y V  
Press MENU to exit  
Ra t in g Se t t in g s Are a  
Lets you see the current block/view state of age-based  
ratings and associated content. The color of the content  
theme letter indicates its status: Green = View, Red = Block.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Bl o c k in g Ag e -Ba se d Ra t in g s  
V-CHIP RATING LIMIT  
You can automatically block all program ratings above a specified  
age-based rating level. For example, if you only want your child to  
watch programs that have a TV-G rating and lower (in other words, you  
want the child to watch TV-G, TV-Y7, and TV-Y), then you need to block  
out other programming with higher ratings.  
1
2
3 4 5 6 7  
Rating Status D L S V FV  
TV-PG Block B B B B  
TV-MA B LSV  
TV-14 B DLSV  
TV-PG B DLSV  
TV-G V  
TV-Y7 VFV  
TV-Y V  
To block programs:  
1. Determine the lowest level rating you do not want the child to  
watch.  
Press MENU to exit  
Changing the TV-PG rating status from View  
(V) to Block (B) causes the higher ratings  
and content to block out as well.  
2. Continuously press 1 on the remote to scroll through the age-  
based ratings. Stop pressing 1 when the lowest rating you do not  
want the child to watch appears. (In the example, you would  
press 1 until TV-PG appeared on screen, since the highest rating  
you want the child to watch is TV-G).  
3. Press 2 to change the rating status from View (V) to Block (B). The  
status for this rating and all higher ratings automatically changes  
to Block (B) (indicated by the rating limits in the rating status  
area turning red). Note that all associated content is also  
automatically blocked.  
Vie w in g Ag e -Ba se d Ra t in g s  
After you block age-based ratings, you have the option of going back  
and changing some of the content ratings back to View (V).  
V-CHIP RATING LIMIT  
1
2
3 4 5 6 7  
1. Determine the rating you want to view that is currently blocked.  
Rating Status D L S V FV  
TV-14  
Block  
V V V V  
2. Continually press 1 until the rating status corresponding with the  
age-based rating you want to change appears on the screen.  
TV-MA B LSV  
TV-14 V DLSV  
TV-PG B DLSV  
TV-G V  
TV-Y7 VFV  
TV-Y V  
3. Press 2 to change the status from Block (B) to View (V). Your child  
would then be able to watch all programs with a TV-14, TV-G,  
TV-Y7, and TV-Y rating.  
Press MENU to exit  
Note that TV-14s content status fields at the bottom of the screen  
automatically change to a view state, indicated by green letters. These  
are the only fields that automatically change back to green when you  
complete this process.  
Viewing Age-Based Ratings: Press 2 to  
change the status back to View.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Bl o c k in g Sp e c if ic Co n t e n t Th e m e s  
V-CHIP RATING LIMIT  
You can block programs based on their content. (Content is  
represented by the D, L, S, V, and FV on your screen.) When you  
block a content theme for a particular rating, you automatically  
block that content theme for higher-rated programs as well.  
1
2
3 4 5 6 7  
Rating Status D L S V FV  
TV-PG View V B V V  
TV-MA V LSV  
TV-14 V DLSV  
TV-PG V DLSV  
TV-G V  
TV-Y7 VFV  
TV-Y V  
For example, if you do not want your child to watch programs that  
have adult language (L) rated TV-PG or higher, then you would also  
block out all programming TV-PG and above containing adult  
language.  
Press MENU to exit  
Selecting TV-PG and the content theme  
Adult language (L) blocks all programs  
with Adult language (L) rated TV-PG and  
higher.  
To block program content:  
1. Determine the lowest level age-based content you do not  
want the child to watch.  
2. Press 1 until the lowest age-based rating whose content  
theme you do not want the child to watch appears on  
screen.  
Pressing CLEAR exits Parental Controls  
w ithout saving your changes.  
3. To change the content theme to Block (B), press the number  
on the remote that corresponds with the content theme you  
want to block:  
Sexually suggestive  
dialogue (D) = 3  
Violence (V) = 6  
Adult language (L) = 4  
Sexual situations (S) = 5  
Fantasy violence (FV) = 7  
4. After you press the number, the V for the content theme  
should change to a B in the content status field. In the  
ratings settings area, all higher ratingscontent theme  
status will automatically change to Block (letters will turn  
red).  
Remember: You must lock your Parental Controls settings for rating  
limits to take effect.  
Vie w in g Sp e c if ic Co n t e n t Th e m e s  
V-CHIP RATING LIMIT  
1
2
3 4 5 6 7  
Rating Status D L S V FV  
TV-PG View B V B B  
After you block specific content themes, you have the option of  
going back and changing some of the content themes back to  
View (V).  
TV-MA B LSV  
TV-14 B DLSV  
TV-PG V DLSV  
TV-G V  
TV-Y7 VFV  
TV-Y V  
1. Determine the rating you want to change to View (V).  
2. Continuously press 1 until the rating status corresponding  
with the content theme(s) you want to change appears on  
screen.  
Press MENU to exit  
3. To change the content theme from Block (B) to View (V),  
press the number on the remote that corresponds with the  
content theme you want to view.  
Note that only the content theme status  
corresponding to the rating you selected  
changes to View (V). Higher-rated content  
themes, such as that for TV-MA language,  
do not change to View (V).  
4. After you press the number, the B should change to V in the  
content status field.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
TV/VCR MAIN MENU  
Se t t in g M o v ie Ra t in g Lim it s  
1 Screen  
2 Time  
You set movie rating limits by blocking movies rated above a specified  
level.  
3 Timer Recordings  
4 Parental Controls  
5 Setup  
PARENTAL CONTROLS  
6
To access the V-Chip Movie Rating Limit menu:  
1. Press MENU to access the TV/VCR Main Menu.  
2. Press 4 to display the Parental Controls menu.  
3. Press 2 for the V-Chip Movie Rating Limit screen.  
1 V-Chip Rating Limit  
2
2 V-Chip Movie Rating Limit  
0
V-CHIP MOVIE RATING LIMIT  
Rating  
1 NR  
Status  
2 View  
NR  
X
View  
View  
PG-13 View  
4. Use the number buttons (1-2) to change the status of a movie  
rating.  
PG  
G
View  
View  
NC-17 View  
View  
R
Remember: You must lock your Parental Controls settings for rating  
limits to take effect.  
Press MENU to exit  
Bl o c k in g M o v ie Ra t in g s  
V-CHIP MOVIE RATING LIMIT  
If you only want your child to watch movies that have a PG rating and  
lower (in other words, movies rated PG and G), then you could  
automatically block out all other movies with higher ratings.  
Rating  
1 NR  
Status  
2 Block  
NR  
Block PG-13 Block  
To block movies:  
X
Block PG  
NC-17 Block G  
Block  
View  
View  
1. Determine the lowest level rating you do not want the child to  
watch.  
R
Press MENU to exit  
2. Continuously press 1 until the lowest rating you do not want the  
child to watch appears as the rating. (In the example above, you  
would keep pressing 1 until the rating status scrolled to PG-13,  
since the highest rating you want the child to watch is PG.)  
Change the status from View to Block and  
all higher-rated movies will also be  
blocked.  
3. Press 2 to change the status from View to Block. All higher  
ratingsstatus will automatically change to Block.  
Remember: You must lock your Parental Controls settings for rating  
limits to take effect.  
V-CHIP MOVIE RATING LIMIT  
Rating  
1 PG-13  
Status  
2 View  
Vie w in g M o v ie Ra t in g s  
NR  
X
Block PG-13 Block  
Block PG  
View  
View  
After you block movie ratings, you have the option of going back and  
changing some of the rating statuses back to View.  
NC-17 Block G  
Block  
R
1. Determine the movie ratings you want to change to View.  
Press MENU to exit  
2. Continuously press 1 until the rating you want to change appears  
on the screen.  
Viewing Movie Ratings: Pressing 2 on the  
remote changes the status back to View.  
3. Press 2 to change the status from View to Block.  
For example, if movies with a rating of PG-13 and higher are  
blocked, you can change the rating status button corresponding  
with NC-17. Your child would then be able to watch all movies  
with a G, PG, and NC-17 rating.  
Pressing 0 on the remote w ill reset all  
ratings to View and V.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
TV/VCR MAIN MENU  
Bl o c k in g Un r a t e d TV Pr o g r a m s  
1 Screen  
2 Time  
Some TV programs are not rated but may contain material you do  
not want your children to see. These programs must be blocked  
separately.  
3 Timer Recordings  
4 Parental Controls  
5 Setup  
PARENTAL CONTROLS  
6
1. Press MENU to display the TV/VCR Main Menu.  
2. Press 4 to display the Parental Controls menu.  
1 V-Chip Rating Limit  
2
3
2 V-Chip Movie Rating Limit  
3 Unrated Programs: Block  
0
4 Lock Parental Controls  
3. Press 3 to select Unrated Programs from the menu and to  
toggle between View and Block.  
Note that unrated programs may include news, sports,  
political, religious, local and weather programs, emergency  
bulletins, public announcements and programs without a  
rating.  
0 Exit  
Press 3 to toggle between View  
and Block for Unrated Programs.  
Lo c k / Un l o c k Pa r e n t a l Co n t r o l s  
Selecting this option lets you lock and unlock Parental Controls  
settings using a password.  
If you do not lock Parental Controls, none of the settings for V-Chip  
Rating Limit or Unrated Programs will take effect.  
TV/VCR MAIN MENU  
1 Screen  
2 Time  
3 Timer Recordings  
4 Parental Controls  
1. Press MENU to display the TV/VCR Main Menu.  
2. Press 4 to display the Parental Controls menu.  
3. Press 4 to display the Lock Parental Controls screen.  
5 Setup  
PARENTAL CONTROLS  
6
1 V-Chip Rating Limit  
2 V-Chip Movie Rating Limit  
2
3
4. Using the number buttons (0-9) enter a four-digit password.  
Press CLEAR to make any corrections and MENU to exit.  
3 Unrated Programs: Block  
0
4 Lock Parental Controls  
Once you have set your password, the V-Chip Rating Limit and  
Unrated Programs settings become active. If you try to access a  
program that is blocked, the screen displays the message This  
channel has not been approved for viewing.Follow the  
instructions on the screen to enter your password and temporarily  
override the rating limits.  
0 Exit  
To unlock the Parental Controls settings, you must use your  
password to access the Parental Controls menu.  
1. Press MENU to display the TV/VCR Main Menu.  
2. Press 4 to display the Parental Controls menu.  
3. Follow the instructions on the screen and enter your  
password.  
4. Press 4 to unlock Parental Controls.  
If you forget your password, press STOP/EJECT on the TV/VCR front  
panel and MENU on the remote simultaneously. This resets the  
password, but not the limits youve set.  
Re m e m b e r: Yo u m u st lo ck yo u r Pa re n t a l Co n t ro ls se t t in g s  
fo r ra t in g lim it s t o t a ke e ffe ct .  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Usin g t h e Gu id e PIUS+ sy st e m  
The GUIDE Plus+ system is an interactive on-screen program guide that  
lists TV schedules for your area and allows your TV direct control of a  
cable box and VCR. You must first set up the GUIDE Plus+ menu in order  
to view it.  
To bring up the GUIDE Plus+ screen, press GUIDE. There are five sections  
to a GUIDE Plus+ screen:  
A row of Action buttons at the top of the screen (1, 2 and 3)  
Program information  
A row of Menu options  
Channel listings  
Advertising and special show information  
TV/VCR MAIN MENU  
You can also access the GUIDE Plus+ menu by pressing MENU on the  
remote and then selecting GUIDE Plus+ Menu. If you press MENU on the  
remote, you can access several other features:  
1 Screen  
2 Time  
3 Timer Recordings  
4 Parental Controls  
5 Setup  
GUIDE Plu s+ Se t u p Displays the GUIDE Plus+ Setup screen.  
6 GUIDE Plus+ Menu  
Se t u p Setting up the GUIDE Plus+ system is detailed in Setup,”  
later in this section.  
GUIDE Plus+ MENU  
0
1 GUIDE Plus+ Setup  
2 Continuous Demo  
3 GUIDE Plus+ Label:  
Vie w De m o Runs the GUIDE Plus+ system demonstration.  
ON  
Op t io n s Displays the GUIDE Plus+ autodisplay options.  
On Automatically displays the GUIDE Plus+ system  
when you use the TV button or the ONOFF button on the  
remote to turn on the TV.  
0 Exit  
Off Disables the GUIDE Plus+ system from being  
displayed when you use the TV button or the ONOFF  
button on the remote to turn on the TV.  
Co n t in u o u s De m o Runs the GUIDE Plus+ demonstration until it is  
turned off. To end the Continuous Demo, press MENU.  
GUIDE Plu s+ La b e l Displays the GUIDE Plus+ label menu.  
On Displays the station name when you change channels.  
Off Disables the Label feature.  
Program  
Action Buttons  
Information  
The following sections tell you more about the GUIDE Plus+ system, how  
to use it, and how it works.  
No t e : GUIDE Plus+ screens illustrated in this book are representations  
of what you are likely to see. Not all channels, programs, and GUIDE  
Plus+ information depicted will be available in your area. New features  
and options can be downloaded to the GUIDE Plus+ system, so these too  
are subject to change.  
Menu  
Options  
Ad/Show  
Information  
Channel Listings  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Ge t t in g In & O u t o f t h e Gu id e PiUS+ Sy st e m  
To enter the GUIDE Plus+ system, press GUIDE on the remote.  
There are three ways to exit the GUIDE Plus+ system:  
ONOFF  
VCR1  
TV  
DVD VCR2  
AUX SAT•CABLE  
MUTE  
SEARCH  
Press OK to exit the GUIDE Plus+ system and tune to the channel  
highlighted in the Channel listing.  
CH  
+
Press GUIDE to exit the GUIDE Plus+ system and tune to the  
channel displayed in the background.  
CH  
SPEED  
GUIDE  
GO BACK  
INFO  
Press CLEAR to exit the GUIDE Plus+ system and return to the  
last channel you were watching.  
OK  
MENU  
CLEAR  
Do w n l o a d in g Da t a  
1
2
5
8
0
3
6
9
The GUIDE Plus+ system is not available until it completes its first  
download of Program information. When the power is turned off, the  
TV locates a host channelthat carries GUIDE Plus+ data containing  
Program schedule and Channel Mapping information. (A channel map  
is the list of stations and their respective channels.)  
4
7
INPUT  
ANTENNA  
REVERSE  
REC•VCR+  
PLAY  
STOP  
FORWARD  
PAUSE  
To ensure that your first download of data is complete, you should  
leave your TV off overnight. Downloads occur several times a day. The  
TV must be turned off for GUIDE Plus+ data to download.  
- TRACKING +  
EDIT FR. ADV  
If the TV loses power or is unplugged, GUIDE Plus+ Program  
information may be lost. When power is restored, make sure the setup  
information is still correct. The GUIDE Plus+ system will complete a  
download at the next available opportunity.  
Press GUIDE on the remote control to see the  
GUIDE Plus+ system. To remove the program guide  
from the screen, press OK, GUIDE, or CLEAR.  
Ch a n n e l M a p p in g  
If more than one cable company services your area, you may be  
prompted with a Channel Mapping screen after the first GUIDE Plus+  
download. You will need to identify your cable company by selecting  
the correct channel numbers for the stations in question.  
Use the left and right arrows to change the channel group and  
press OK when the correct channel group is highlighted.  
Th e Dif f e r e n t Gu id e PIUS+ sy st e m M e n u s  
The GUIDE Plus+ system offers seven different options on the Menu  
bar: Grid, Sort, News, Schedule, Messages, Editor, and Setup. To access  
the Menu bar:  
1. Press GUIDE to bring up the GUIDE Plus+ screen.  
2. Press MENU or use the up and down arrows to highlight the  
Menu bar. The Grid guide comes up by default.  
3. Use the left and right arrows to access other menus.  
4. Press OK, MENU, or use the down arrow to access the Menu  
options.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Grid Guide Action Buttons  
Gr id Gu id e  
The Grid guide appears each time you enter the GUIDE Plus+ system. It  
displays the current programming for each channel. The live program is  
displayed in the video window.  
Use the up and down arrows to browse Channel listings and  
CH ^ and v to page through listings. Use the right and left arrows  
to browse future Program listings.  
Grid Guide  
Menu  
Selection  
To tune to a channel, highlight the program you want to view in  
the Channel listing and press OK. Press CLEAR to exit the GUIDE  
Plus+ system and return to the original channel. Press GUIDE to  
exit the GUIDE Plus+ system and tune to the channel in the  
background.  
Grid Guide Action Buttons  
Action buttons will change according to where you are in the GUIDE  
Plus+ system. Be sure to look at the Action bar before pressing the  
command numbers.  
When highlighting the Channel listings, the following Action buttons  
are available on the bar:  
Wa t ch Press 1 on the remote to place a timer in the Schedule  
for the TV to turn on and tune to the program highlighted in the  
Channel listing. When the TV turns on, the GUIDE Plus+ system  
will automatically appear with the scheduled program  
highlighted and tuned.  
Go To Press 2 on the remote to bring up the direct dial box and  
enter the number of the channel you want. This will highlight the  
channel and current program in the Channel listing of the Grid  
guide. Press OK to tune to the highlighted channel. If the video  
window is unlocked, you can press GUIDE to tune to the channel.  
Re co rd Press 3 on the remote to place a timer in the Schedule  
for the VCR to record the program highlighted in the Channel  
listing. If you have a cable box, changing TV channels will not  
cause the cable box channel to change while recording.  
The Program information window will display a confirmation when you  
have successfully created a timer to watch or record.  
When highlighting Channel names (left column on the Channel listing),  
the following Action button is available on the bar:  
Lo ck/Un lo ck Press 1 to lock or unlock the video window to  
either stay at one channel as you browse the GUIDE Plus+ system  
(lock) or change as you browse through different channels  
(unlock).  
Go To Press 2 on the remote to bring up the direct dial box and  
enter the number of the channel you want. This will highlight the  
channel and current program in the Channel listing of the Grid  
guide. Press OK to tune to the highlighted channel. If the video  
window is unlocked, you can press GUIDE to tune to the channel.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Sort Menu Action Buttons  
So r t  
The Sort menu lets you browse programs by category. The channel to  
which you are currently tuned is displayed in the background. To sort:  
1. Press MENU to highlight the Menu bar.  
2. Use the arrows to highlight Sort. When Sort is highlighted for the  
first time, the Movies category is displayed. Thereafter, the last  
category used becomes the default. A listing of subcategories is  
displayed below the category name.  
Sort Menu  
Selection  
Categories  
3. Use the up and down arrows to highlight a subcategory. For  
example, highlight All and press OK.  
4. When the listing comes up, movie topics are displayed on screen.  
Use the up and down arrows to browse the list one at a time. Use  
CH ^ and v to browse through the list one page at a time. You  
can also view the next seven daysprogramming by pressing the  
right arrow.  
5. Select MENU to return to the Menu bar, or press GUIDE or CLEAR  
to exit the GUIDE Plus+ system.  
Sort Menu Action Buttons  
When viewing the results of a Sort, the following Action buttons will  
appear on the bar:  
Wa t ch Press 1 on the remote to place a timer in the Schedule,  
and then follow the on-line help for further options. Placing a  
timer in the Schedule will cause the TV to turn on and tune to the  
program highlighted in the Channel listing at the predetermined  
time. When the TV turns on, the GUIDE Plus+ system will  
automatically appear with the scheduled program highlighted  
and tuned in the background.  
Re co rd Press 3 on the remote to place a timer in the Schedule  
for the VCR to record the program highlighted in the Channel  
listing. If you have a cable box, changing channels on the TV will  
not cause the cable box channel to change while recording.  
The Program information window will display a confirmation when you  
have successfully created a timer to watch or record.  
If you have selected two programs to watch or record which begin at  
the same time or overlap, you will receive a timer conflict message. The  
GUIDE Plus+ system will not schedule a conflicting timer, therefore, you  
must choose between the two programs.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
New s  
The News menu lets you browse current news stories by headline.  
1. Press GUIDE (the GUIDE Plus+ system appears). Then press MENU  
to select the menu bar.  
2. Use the arrows to highlight News.  
3. Use the up and down arrows to highlight a story.  
Use the up and down arrows to browse one list at a time.  
Use CH ^ and v to browse through the list one page at a time.  
4. Press the right arrow button to see full text.  
5. Select MENU to return to the Menu bar, or press GUIDE or CLEAR  
on the remote to exit the GUIDE Plus+ system.  
Schedule  
The Schedule menu lets you create timers for either viewing or  
recording programs. The GUIDE Plus+ system allows one-button  
recording. If you have a cable box, make sure you have connected the  
G-LINK cable to it. See the subsection Step 5: Connect the G-Link Cable”  
in the section Setup and Connectionsfor more details.  
Schedule Menu Action Buttons  
To schedule a program to watch or record:  
1. Press GUIDE to bring up the GUIDE Plus+ system.  
2. Highlight a program within the Channel listing.  
3. Select Watch or Record from the Action buttons. The timer is then  
automatically logged into the Schedule menu.  
Schedule  
Menu  
Selection  
4. If you select Record, make sure to place a blank tape in the VCR and  
leave the VCR turned off.  
The Program information window will display a confirmation when you  
have successfully created a timer to watch or record.  
If you have selected two programs to watch or record which begin at  
the same time or overlap, you will receive a timer conflict message. The  
GUIDE Plus+ system will not schedule a conflicting timer, therefore you  
must choose between the two programs.  
The GUIDE Plus+ system recording timer  
w ill override the VCR timer if you have set  
conflicting timers.  
To remove or change the frequency (daily, once, or weekly) of a  
scheduled event, access the Schedule menu from the Menu bar.  
1. Press GUIDE to bring up the GUIDE Plus+ system.  
2. Press MENU to highlight the Menu bar.  
3. Use the arrows to highlight the Schedule menu selection.  
4. Use the up and down arrows to highlight the program you want  
to edit. Then use the Schedule menu Action buttons as described  
in the next section.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Schedule Menu Action Buttons  
When viewing the Schedule menu the following Action buttons will  
appear on the bar:  
Re m o ve /St o p Highlight the Watch or Record timer you wish to  
remove from the Schedule and press 1 on the remote.  
Ch a n g e Highlight the Watch or Record timer you wish to  
change and press 3 on the remote to toggle the frequency  
between the following choices:  
Da ily Records the same program each day Monday-Friday.  
On ce Records only on that day.  
We e kly Records the program each week at the same time.  
Messages  
Messages Menu Action Buttons  
Occasionally you will receive messages regarding your GUIDE Plus+  
system, as well as special programming information. You can access  
these messages from the Messages menu on the Menu bar.  
To read messages:  
1. Press MENU on the remote to select the Menu bar.  
2. Use the arrows to highlight the Messages menu selection.  
Messages  
Menu  
Selection  
3. Highlight the message you wish to read by using the up and  
down arrows.  
4. Press INFO to display the full text of the message. If the text  
continues beyond the screen, press INFO to view the next page of  
text. Once you have reached the end of the message, press INFO  
to close the expanded information and return to the Messages  
screen.  
5. Then use the Messages menu Action button as described in the  
next section.  
Messages Menu Action Button  
When viewing the Messages menu, the following Action button will  
appear on the bar:  
Re m o ve Highlight the message you wish to delete and press 1  
on the remote.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s a n d Co n t r o l s  
Editor  
You may customize the Channel listing by enabling or disabling the  
display of certain channels. For instance, you may disable channels that  
you never watch. You can restore disabled channels at a later point in  
time.  
Editor Menu Action Buttons  
1. Press GUIDE to bring up the GUIDE Plus+ system.  
2. Press MENU to highlight the Menu bar.  
Editor  
Menu  
3. Use the right and left arrows to highlight the Editor menu  
Selection  
selection.  
4. Use the up and down arrows to select a channel.  
Then use the Editor menu Action buttons as described in the next  
section.  
Editor Menu Action Buttons  
While browsing the Editor menu, the following Action buttons are  
available on the bar:  
Ca n ce l Press 1 on the remote to cancel any changes made since  
entering the Editor menu.  
Ch a n g e Press 2 on the remote to change the Channel number  
for the highlighted Channel line.  
On /Off Press 3 on the remote to toggle the state of the channel  
between On and Off.  
Ex pa n d e d In f o r m a t io n  
To view more information about a program,  
advertisement, or special, highlight the  
Channel listing or ad/show information box  
and press the INFO button. Requesting more  
information about a particular show will  
also display the PlusCode programming  
number and the Shows on Next for that  
channel.  
Setup  
The Setup menu lets you access GUIDE Plus+ system setup information.  
To access the Setup option:  
1. Press MENU on the remote to highlight the Menu bar.  
2. Press 5 to select the Setup menu selection.  
3. Use the up and down arrows to select Setup, View Demo, or  
Options:  
Pressing INFO while highlighting an ad  
panel will fill the screen with any additional  
and/or promotional information regarding  
that particular program.  
Se t u p Displays the GUIDE Plus+ system Setup screens. See the  
subsection Step 8: Set Up the GUIDE Plus+ Systemin the  
section Setup and Connectionsfor more details.  
Vie w De m o Runs the GUIDE Plus+ system demonstration.  
Pressing the INFO button again exits the  
expanded information screen.  
Op t io n s Displays the GUIDE Plus+ autodisplay options.  
On Automatically displays the GUIDE Plus+ system  
when you use the TV button on the remote to turn on the  
TV.  
Off Disables the GUIDE Plus+ system from being  
displayed when you use the TV button on the remote to  
turn on the TV.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
Ge t t in g Assist a n c e  
Se t u p a n d c o n n e c t io n s  
1
2
3
4
This section provides information you may need for guidance  
while using your TV/VCR. It gives you specific information  
about the front panel and back panel, care and cleaning  
information, a limited warranty, and an index.  
Usin g t h e r e m o t e  
O p e r a t in g In st r u c t io n s  
Fe a t u r e s a n d Co n t r o l s  
Re f e r e n c e  
5
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
Fr o n t Pa n e l  
4
-
H E A D  
AUDIO  
IN  
V
I
DE  
O
IN  
W
AKE  
UP  
T
I
ME  
R
STO  
P/ EJECT  
REC  
REW  
F
FW D  
VO  
L-  
VO  
L+  
CH  
CH  
PO W ER  
PL  
A
Y
PA U SE  
4 - H E A D  
STO P  
EJECT  
WAKE UP TIMER  
REC  
REW  
F FW D  
VO L-  
VO L+  
CH  
CH  
PO W ER  
PLAY  
PA U SE  
AUDIO IN  
VIDEO IN  
AUDIO IN a n d VIDEO IN Ja cks Receives audio and video signals from another component (such as a VCR or camcorder)  
that is connected to these jacks. To select these front panel jacks, press 00 twice to display VIDEO 2.  
CH ^ a n d v (Ch a n n e l u p a n d d o w n ) Selects next higher or lower channel in the TV/VCRs channel memory. Used for  
manual tracking when a tape is playing.  
F. FWD (Fa st Fo rw a rd ) Fast forwards the tape when the VCR is stopped. Searches the picture in forward motion during  
playback.  
He a d p h o n e Ja ck Connect headphones (not supplied) to this jack.  
PLAY/PAUSE Press once to begin playback of a tape. During playback, press to pause. Press again to resume playback.  
POWER Turns the TV/VCR on or off. The indicator in the button lights when the power is on.  
REC (Re co rd ) Press to start TV/VCR recording. The indicator in the button lights during recording.  
Re m o t e Se n so r Receives signals from the remote. Aim remote at this sensor with no objects between them.  
REW (Re w in d ) Rewinds the tape when the TV/VCR is stopped. Searches the picture in reverse during playback.  
STOP/EJECT Stops normal functions such as record, play, rewind, fast-forward, or pause. Press when a tape is stopped to  
eject the cassette.  
TIMER In d ica t o r Lights when a timer program has been set and a cassette with safety tab in place is in the TV/VCR.  
Flashes when a timer recording has been set and the TV/VCR is turned off when no cassette has been inserted, a cassette  
with no safety tab has been inserted, or there has been a power interruption.  
WAKE-UP In d ica t o r Lights when the wake-up timer turns on the TV/VCR.  
VOL + a n d (Vo lu m e u p a n d d o w n ) Raises and lowers the sound.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
Ba c k Pa n e l  
To view the device you have connected to the AUDIO/VIDEO jacks, press 00 once to display VIDEO 1.  
VIDEO a n d AUDIO INPUT Ja cks  
Receive signals from another component  
(such as a VCR or camcorder) that is  
connected to these jacks. Be aware that  
the back panels Audio/Video jacks are  
disabled when you connect a device to the  
front panels Audio/Video jacks.  
IN FROM ANTENNA Ja ck  
Receives the signal from an  
antenna or cable system.  
G-LINK Ja ck  
Enables the TV/VCRs GUIDE Plus+ system  
to interact with your cable box (if you  
have one). Connect the end of the  
G-LINK cable (provided) to this jack.  
IN FROM  
ANTENNA  
G-LINK  
INPUT  
AUDIO  
VIDEO  
Note that you must remove the demo pin  
from the G-LINK jack on the back of the  
TV/VCR before inserting the G-LINK  
cable.  
Tr o u b l e sh o o t in g  
Sometimes problems can be easily solved by checking a few basic things. Check below before you call for help or take your  
TV/VCR to an Authorized RCA VCR Service Center.  
No pow er  
Plug TV/VCR into an operating outlet.  
Check connections.  
Make sure the wall outlet is not controlled by a wall switch.  
TV/VCR does not respond to remote  
Aim remote at TV/VCRs remote sensor with no objects between them.  
Change batteries and make sure they are properly installed.  
Poor or no picture during TV view ing  
Switch to an active channel.  
Check antenna connections. If using a dipole antenna, try adjusting its rods.  
Check picture adjustments.  
Make sure the line input is not selected. Repeatedly press 00 on the remote to switch between  
audio/video input jacks and tuner.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
No sound  
Press VOL ^ to increase the sound.  
Sound has been muted. Press MUTE or VOL ^ on remote.  
Snow or streaks in picture or no picture during tape playback  
Check tape it may be worn out or of poor quality. Try another tape.  
Some snow/streaks are normal during search, pause, frame advance, and slow-motion playback.  
Press one of the TRACKING buttons on the remote or CH ^ or v on the TV/VCR to move the streaks up or down and out  
of the picture.  
Will not record or play  
No cassette in TV/VCR.  
Eject and re-insert cassette.  
Broken tape try another cassette.  
Safety tab removed from cassette TV/VCR will not record.  
TV/VCR is in pause mode. Press PAUSE on the remote.  
The GUIDE Plus+ system recording timer will override the VCR timer if you have set conflicting timers. If the VCR-timed  
recording is already in progress, it will be interrupted and the GUIDE Plus+ system-timed recording will begin as  
scheduled.  
Cannot insert or eject tape  
Insert cassette with window facing up and safety tab facing out.  
To remove cassette, TV/VCR must be connected to working outlet.  
Turn POWER off and then on before trying to insert or remove cassette.  
Time counter not w orking  
Press INFO on remote to display time counter on screen.  
The time counter does not advance during unrecorded portions of tape. When an unrecorded segment of tape is  
encountered, the time counter will hold its count until recorded material is detected again.  
A minus () will appear in front of the time counter if you rewind the tape farther back than a counter reading of  
0:00:00.  
Device connected to back panel A/V jacks w ill not w ork  
If you have a device connected to the front panels Audio/Video jacks, the back panel Audio/Video jacks are disabled.  
Timer recording not made or w rong program recorded; clock show s incorrect time or date  
Program entered incorrectly (wrong channel or times).  
Cable box was not turned on and tuned to the correct channel at time recording was to begin.  
Power interruption. TIMER indicator flashes on front of TV/VCR.  
Program exceeded tapes length or tape was not rewound beforehand.  
No tape in TV/VCR, or cassette ejected if safety tab broken off.  
Power interruption. TIMER REC indicator flashes on front of TV/VCR.  
Clock was not set accurately (check AM/PM and date).  
The GUIDE Plus+ system recording timer will override the VCR timer if you have set conflicting timers. If the VCR-timed  
recording is already in progress, it will be interrupted and the GUIDE Plus+ system-timed recording will begin as  
scheduled.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
TV/VCR makes noise w hen stopped  
TV/VCR is removing tape from heads. This is normal. The head cylinder inside the TV/VCR will continue to rotate for a  
few minutes after you put the VCR in the stop mode.  
Will not Auto Channel Search active channels correctly  
Check antenna or cable connections.  
You cannot add or remove channels from the TV/VCRs memory if youre using a cable box and have set up the GUIDE  
Plus+ system.  
Cannot see closed captions on screen  
Closed caption function must be set to On.  
Station may not be broadcasting closed captions.  
Box appears on screen  
A text feature has been selected. To change the setting, press MENU on the remote, then press 1, then 2. Press 1 to  
change the Display and 2 to select the Mode. See page 35 for details.  
TIMER indicator on front of TV/VCR is flashing  
Power interruption. Check time and date setting (clock).  
Timer program set and TV/VCR turned off with no cassette or cassette with no safety tab inserted.  
Tape plays over and over  
Auto repeat is turned on.  
Tape starts playing automatically  
Auto play feature is turned on.  
Channel number displayed on screen does not change w hen I press CH ^ or v  
The on-screen channel number will always be the same as the channel number youve selected on the switch found on  
the rear of the cable box (channel 2, 3, or 4), regardless of the channel displayed on the cable box (the channel youre  
viewing). The channel number displayed on the cable box should change when you press CH ^ or v.  
TV/VCR turns off automatically  
Sleep timer is turned on. Press TV or VCR to turn the TV/VCR back on. Remember that if you have set the sleep timer to  
activate any time during a GUIDE Plus+ system-timed recording, the sleep timer will not activate.  
TV/VCR turns on automatically  
Wake-up timer (alarm) is turned on. Remember that if you have set the wake-up timer to activate any time during a  
GUIDE Plus+ system-timed recording, the wake-up timer will not activate.  
Sleep timer or w ake-up timer not w orking  
If you have set the sleep timer or wake-up timer to activate any time during a GUIDE Plus+ system-timed recording, the  
sleep timer or wake-up timer will not activate.  
Cannot record one program w hile w atching a different program  
TV/VCR only has one tuner. Only one program can be watched and recorded at the same time.  
Parental Controls are not blocking programs  
Make sure Parental Control feature is turned on.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
Parental Control passw ord does not w ork  
Reset Parental Control password.  
Front panel buttons w ont w ork  
When the GUIDE Plus+ system is recording, front panel buttons are inoperative.  
Not receiving all cable channels  
Make sure you have set up the GUIDE Plus+ menu to recognize your cable box. Select GUIDE Plus+ Menu from the Main  
Menu, then select Setup from the GUIDE Plus+ menu. Choose Yes when asked if you have a cable box. Then select Setup  
from the Main Menu and run Auto Search. Also make sure you are using the G-LINK cable properly.  
GUIDE Plus+ problems  
Check to make sure the G-LINK cable is attached correctly over the IR remote sensors on your cable box, that you have  
specified in the GUIDE Plus+ setup that you are using a cable box, and that you have completed the TV/VCR menu  
setup.  
Your remote may be interfering with the G-LINK cable. Place a piece of dark tape over the IR controller.  
GUIDE Plus+ system control of cable box is slower than direct control of the box when changing channels.  
You may have an incorrect GUIDE Plus+ Channel Map. The guide may get out of sync with the cable provider. Use the  
GUIDE Plus+ Setup feature to change the zip code to 99999. Turn the TV off for 10 minutes. Use Setup again to change  
the zip code back to the correct value. If asked, be sure to select the correct lineup.  
If you move or if any of your information changes, follow these steps: (1) Press MENU on the remote to display the  
TV/VCR Main Menu; (2) Press 6, then 1 to set up the GUIDE Plus+ system; (3) Press 5, then 1 to initiate Auto Channel  
Search.  
If the GUIDE Plus+ system appears when you play a tape, press the GUIDE or CLEAR button on the remote. The GUIDE  
Plus+ system will disappear in approximately one minute if you do not press any button.  
Guide comes up w hen I turn on the TV/VCR  
You can turn off this feature by selecting Setup from the GUIDE Plus+ menu when the guide is available (press MENU  
and use the right arrow buttons) and then selecting Options. Choose Off.  
SATCABLE button on remote doesnt w ork  
You must complete the GUIDE Plus+ setup, making sure to specify that you are using a cable box and that you have  
completed the TV/VCR setup.  
Cl e a n in g t h e TV/ VCR  
Turn off the TV/VCR before cleaning.  
You can clean the TV/VCR as required by using a soft cloth or the dusting attachment of your vacuum cleaner. Be sure to  
occasionally vacuum the ventilation slots in the cabinet to help assure adequate ventilation.  
To clean the TV/VCR screen, use a soft cloth dampened with a diluted soap and water mixture. Do not use furniture polish  
on the TV/VCR cabinet or screen.  
While cleaning, do not spray liquid directly on the screen or allow liquid to run down the screen or inside the TV/VCR. Also,  
avoid placing drinks or vases with water on top of the TV/VCR. This could increase the risk of fire, shock hazard, or damage  
to the TV/VCR.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
Lim it e d Wa r r a n t y  
Wh a t yo u r w a rra n t y co ve rs:  
Any defect in material or workmanship.  
Fo r h o w lo n g a ft e r yo u r p u rch a se :  
Ninety days for labor charges.  
One year for parts.  
Two years for picture tube.  
(The warranty period for rental units begins with the first rental or 45 days from date of  
shipment to the rental firm, whichever comes first.)  
Wh a t w e w ill d o :  
Pay any Authorized RCA VCR Service Center the labor charges to repair your TV/VCR.  
Pay any Authorized RCA VCR Service Center for the new or, at our option, rebuilt replacement parts and  
picture tube required to repair your TV/VCR.  
Ho w yo u g e t se rvice :  
For screen sizes of 26and smaller:  
Take your RCA TV/VCR to any Authorized RCA VCR Service Center and pickup when repairs are complete.  
For screen sizes larger than 26: Request home service from any Authorized RCA VCR Service Center, provided  
that your TV/VCR is located within the geographic territory covered by an Authorized RCA VCR Service Center.  
If not, you must take your TV/VCR to the service center location at your own expense, or pay for the cost the  
service center may charge to transport your TV/VCR to and from your home.  
To identify your nearest Authorized RCA VCR-Service Center, ask your dealer, look in the Yellow Pages, or call  
1-800-336-1900.  
Show the Authorized Service Center representative your sales receipt or other evidence of purchase date.  
Wh a t yo u r w a rra n t y d o e s n o t co ve r:  
Customer instruction. (Your Owners Manual clearly describes how to install, adjust, and operate your TV/VCR.  
Any additional information should be obtained from your dealer.)  
Installation and related adjustments.  
Signal reception problems not caused by your TV/VCR.  
Damage from misuse or neglect.  
Cleaning of video/audio heads.  
Batteries.  
A TV/VCR that has been modified or incorporated into other products or is used for institutional or other  
commercial purposes.  
Images burnt onto the screen.  
Acts of God, such as but not limited to lightning damage.  
A TV/VCR purchased or serviced outside the USA.  
Pro d u ct Re g ist ra t io n :  
Please complete and mail the Product Registration Card packed with your set. It will make it easier for RCA to  
contact you should it ever be necessary. The return of the card is not required for warranty coverage.  
Ho w st a t e la w re la t e s t o t h is w a rra n t y:  
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.  
If yo u p u rch a se d yo u r TV/VCR o u t sid e t h e Un it e d St a t e s:  
This warranty does not apply. Contact your dealer for warranty information.  
Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service  
calls are the sole responsibility of the purchaser.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
The following accessories are available from most dealers and  
electronics supply stores in case you want to position your  
components farther apart or need additional cables.  
Accessory Information  
Antenna (or cable-TV) connections are made with  
either coaxial antenna cable or twin-lead cable.  
Coaxial cables are shielded so they are less susceptible  
to hum or interference from adjacent cables.  
Antenna Cables  
Most audio/video connections between components  
can be made with shielded audio and video cables  
that have RCA-type phono connectors.  
Scre w -o n Ca b le attaches to  
the round antenna connectors  
(called 75-ohm F-type) on the  
back of your TV/VCR. The ends  
screw onto the connectors for a  
secure connection.  
Push-on Connector  
Screw-on Coaxial  
VH81 (3-ft)  
VH82 (6-ft)  
Pu sh -o n Ca b le attaches to the  
round antenna connectors  
Connector  
Round 75-ohm coaxial cable  
(called 75-ohm F-type) on the  
back of your TV/VCR. The ends  
push on for a quick connection.  
Flat 300-ohm twin-lead cable  
VH89 (6-ft)  
Audio/Video Cables  
Standard Audio/Video cable with RCA-type  
phono plugs (such as No. VH83)  
Mo n a u ra l VCR Du b b in g  
Ca b le lets you connect the  
video and audio jacks of two  
VHS VCRs to duplicate tapes.  
This double cable is  
Color-Coded Jacks  
The jacks on the TVs monitor panel are color-coded  
for ease of use. The video jacks are yellow, the right  
audio jacks are red, and the left audio jacks are white.  
When connecting components to each other, be sure  
that you always connect left outputs to left inputs and  
right outputs to right inputs. If a component has only  
one output (mono), connect it to the R/mono input  
jack.  
color-coded and shielded and  
has RCA-type phono plugs on  
each end.  
Gold-Tipped cable  
VH83 (6-ft)  
St e re o VCR Du b b in g Ca b le  
lets you connect the VIDEO and  
AUDIO jacks of stereo  
To connect S-VHS (Super-VHS) components, an  
S-VHS video cable is required.  
components. This is a triple  
cable.  
S-Video cable (such as No. VH913)  
Gold-Tipped cable  
VH84 (6-ft)  
Gold-Plated Jacks and Gold-Tipped Cables  
Gold plating helps prevent oxidation of contacts which  
provides much less loss than conventional contacts. A  
complete line of gold-tipped cables is available to help  
you obtain optimum performance from your equipment.  
S-Vid e o Ca b le has multi-pin  
connectors on each end for  
connecting S-Video components  
to your TV.  
VH976 (6-ft)  
VH913 (12-ft)  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
ONOFF  
VCR1  
TV  
Accessory Order Form  
DVD VCR2  
AUX SAT•CABLE  
Re m o t e Co n t ro l  
MUTE  
SEARCH  
CH  
+
replacements or spares can  
be ordered as needed.  
Qty  
Description  
Price  
$3.95  
Part No.  
VH81  
CH  
SPEED  
GUIDE  
GO BACK  
INFO  
Screw-on antenna cable (3-ft)  
Screw-on antenna cable (6-ft)  
Push-on antenna cable (6-ft)  
Monaural VCR Dubbing Cable (6-ft)  
Stereo VCR Dubbing Cable (6-ft)  
S-Video Cable (6-ft)  
OK  
MENU  
CLEAR  
1
2
5
8
0
3
6
9
VH82  
$5.95  
$5.95  
4
7
INPUT  
ANTENNA  
VH89  
REVERSE  
REC•VCR+  
PLAY  
STOP  
FORWARD  
PAUSE  
-
TRACKING  
+
EDIT FR. ADV  
VH83  
$5.95  
VH84  
$9.95  
VH976  
VH913  
VH47  
$7.95  
CRK76TRL1  
2-w a y Sig n a l Sp lit t e r  
helps you connect to a  
second TV or VCR.  
S-Video Cable (12-ft)  
$14.95  
$3.95  
2-way Signal Splitter  
Amplified Antenna  
ANT200  
193984  
243300  
228449  
$49.95  
$11.15  
$33.10  
$4.45  
Antenna Mixer  
Remote Control (CRK76TRL1)  
AudioVideo Adapter  
Am p lifie d VHF/UHF/FM  
An t e n n a allows you to  
easily switch from the  
antenna signal to cable or  
satellite easily without  
disconnecting antenna.  
Splitter  
VH47  
$
$
Total Merchandise ............................................  
Sales Tax.............................................................  
ANT200  
We are required by law to collect the  
appropriate sales tax for each individual  
state, country, and locality to which the  
merchandise is being sent.  
$
$
5.00  
Shipping and Handling....................................  
Total Amount Enclosed....................................  
Use VISA, MasterCard, or Discover Card  
preferably.  
Money order or check must be in U.S.  
currency only.  
No COD or CASH.  
All accessories are subject to availability.  
Prices are subject to change without notice.  
Where applicable, we will ship a superseding model.  
Please complete other side also  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
Charge your order on your VISA,  
MasterCard, or Discover Card by  
filling in below  
Placing an Order  
To place your order by phone, have your Visa, MasterCard,  
or Discover Card ready and call the toll-free number listed  
below.  
USE YOUR CREDIT CARD  
®
IMPORTANT: Copy complete account number  
from your VISA card  
Use this number only to place an order for accessory items  
listed on this order form.  
1-800-338-0376  
My card expires:  
To place your order by mail, detach and mail the completed  
order form with credit card information, money order or  
check in US currency (made payable to Thomson Consumer  
Electronics, Inc.) to the following address:  
s
r
r
TM  
IMPORTANT: Copy complete account number  
from your MasterCard  
Vid e o Acce sso rie s  
PO Bo x 8419  
Ro n ks, PA 17573  
Copy Number  
above your  
name on  
My card  
expires:  
MasterCard  
IMPORTANT: Copy complete account number  
from your Discover Card  
My card expires:  
AUTHORIZED SIGNATURE  
(Credit card order will not be processed without signature)  
Print or type your name and  
address clearly.  
A complete and correct  
order will save you days  
of waiting.  
Name:  
Street:  
Apt:  
City:  
State:  
Zip:  
Daytime phone number:  
Please make sure that both sides of this form  
have been filled out completely.  
• Allow 4 weeks for delivery.  
• All accessories are subject to availability.  
• Prices are subject to change.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re f e r e n c e  
In d e x  
A
F
P
T
Accessories 58  
Advance  
Finding the sensor 8  
First time TV/VCR is turned  
on 9  
Frame advance 23  
Front panel 52  
Parental controls 38  
Lock/Unlock 43  
Pause 23  
Recording 28  
Picture  
Search 23  
Play  
Auto 25  
Play a tape 22  
Time  
Counter 24  
Setting 14  
Frame 23  
Timer  
Advertisement  
GUIDE Plus+ system 50  
Age-based ratings 40  
AUDIO IN jacks 52  
Auto play 25  
Auto repeat 25  
Autodisplay  
GUIDE Plus+ system 44, 50  
Automatic  
Tracking 24  
Sleep 36  
Wake-up 36  
Timer indicator 52  
Timer recording 30  
Tracking 24  
Troubleshooting 53  
Turning off  
G
G-LINK cable 4, 8  
GUIDE Plus+ system 9, 44  
Channel mapping 45  
Edit 50  
R
GUIDE Plus+ system on  
startup 44, 50  
Rating limits 39  
Content themes 41  
Movie 42  
Unrated programs 43  
Ratings  
Age-based 40  
Recording 28  
Basic 29  
Express 29  
Pause 28  
Editor 50  
Getting out 11  
Grid guide 46  
News 48  
Schedule 48  
Setup 9  
Automatic head cleaner 28  
U
B
Unlock parental controls  
43  
Unrated TV programs 43  
Back panel 53  
Sort 47  
Basic recording 29  
Batteries for the remote 4  
Blank search 27  
H
V
Head cleaner 28  
Hooking up the TV/VCR 4  
Speeds 28  
Timer 30  
Remote control sensor 8, 52  
Repeat  
Auto 25  
V-Chip 38  
VCR controller 4  
Video  
C
Cable box 6  
I
Adjusting 34  
Volume  
Camcorder 7  
Camcorder hookup 5  
Cleaning the VCR 56  
Clock  
Index search 26  
Adjusting 14  
S
L
W
Schedule  
GUIDE Plus+ system 48  
Search  
Blank 27  
Index 26  
Picture 23  
Zero 27  
Setting 13  
Language  
Selecting 12  
Limited warranty 57  
Lock parental controls 43  
Closed captioning 35  
Commercial  
Wake-up indicator 52  
Wake-up timer 36  
Warranty 57  
Scan 24  
Content themes 41  
Copying tapes 7, 31  
Counter  
Z
M
Set-top antenna 5  
Setup  
Time 24  
Zero search 27  
Memory  
Adding and removing  
channels 13  
Channel 12  
Menus  
GUIDE Plus+ system 9  
Movie rating limits 42  
GUIDE Plus+ system 9, 50  
Signal type 13  
Sleep timer 36  
Slow motion 23  
Sort  
GUIDE Plus+ system 47  
Speeds  
Recording 28  
D
Date  
Setting 14  
Dipole antenna 5  
E
N
Edit  
News  
GUIDE Plus+ system 48  
GUIDE Plus+ system 50  
Editing tapes 31  
Editor  
O
GUIDE Plus+ system 50  
Express recording 29  
On-screen displays 34  
Outside antenna 5  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in  
service for your product.  
The following materials were used in  
printing this publication:  
60%  
RECYCLEDPAPER  
10330 North Meridian Street  
MINIMUM20%POSTCONSUMER  
Indianapolis, IN 46290  
©2000 Thomson Consumer Electronics, Inc.  
Trademark(s)® Registered  
Marca(s) Registrada(s)  
Printed in Thailand  
TOCOM 15392230  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Raymarine GPS Receiver RS12 User Guide
RCA Portable DVD Player Mobile DVD Player User Guide
RCA Satellite TV System Satellite TV Antenna User Guide
Rheem Water Heater Guardian PowerVent User Guide
Rinnai Water Heater REU 16 FUA E User Guide
Rosewill Network Card RPLC 500 User Guide
Ryobi Cordless Saw RJ161V User Guide
Samsung Cell Phone 616960039358 User Guide
Schumacher Power Supply 00 99 000686 User Guide
Sears Treadmill 831294880 User Guide