USER MANUAL
RTB1013
It's important to read this instruction prior to using your new product for the first time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
THE LIGHTNING FLASH AND ARROWHEAD
WITHIN THE TRIANGLE IS A WARNING SIGN
ALERTING YOU OF “DANGEROUS VOLTAGE” IN-
SIDE THE PRODUCT.
THE EXCLAMATION POINT WITHIN THE TRI-
ANGLE IS A WARNING SIGN ALERTING YOU OF
IMPORTANT INSTRUCTIONS ACCOMPANYING
THE PRODUCT.
SEE MARKING ON BACK OF PRODUCT
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH
THE SAME OR EQUIVALENT TYPE.
WARNING: TO BE COMPLETELY DISCONNECT THE POWER INPUT , THE MAINS PLUG OF APPARATUS
SHALL BE DISCONNECTED FROM THE MAINS. THE MAINS PLUG OF APPARATUS SHOULD NOT BE
OBSTRUCTED OR SHOULD BE EASILY ACCESSED DURING INTENDED USE.
Copyrights
Service Information
This product incorporates copyright protection technology
that is protected by methods claims in certain U. S.
Patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
This product should be serviced only by those
specially trained in appropriate servicing techniques.
Main plug is used as the disconnect device, it shall
remain operable and should not be obstructed
duringintendeduse.Tobecompletelydisconnected
the apparatus from supply mains, the main plug of
the apparatus shall be disconnected from the mains
socket outlet completely.
Caution
Invisible laser radiation when open and interlocks
defeated. Avoid exposure to beam. Class 1 laser
product.
This system must be opened only by qualified
technicians to prevent accidents caused by the
laser beam.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
Important Battery Information
CAUTION:
This product utilizes a laser. Use of controls or
adjustments or performance of procedures other
than those specified may result in hazardous
radiation exposure. Do not open covers and do
not repair yourself. Refer servicing to qualified
personnel.
•
Do not mix different types of batteries or new and
old batteries. Do not use rechargeable batteries.
In order to avoid any risk of explosion, observe the
polaritiesindicatedinsidethebatterycompartment.
Replaceonlywiththetypeofbatteriesspecified.Do
not dispose of them in a fire or recharge them.
If you are not using the remote control for a long
period of time, remove the batteries.
•
•
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme du NMB-003 du Cana-
da.
Please respect the environment and
prevailing regulations. Before you dis-
pose of batteries or accumulators, ask
your dealer whether they are subject
to special recycling and if they will ac-
cept them for disposal.
WARNING
To reduce the risk of fire or electric shock,
do not expose this product to rain or mois-
ture. No objects filled with liquids, such as
vases, should be placed on the apparatus.
Illustrations contained in this document are for rep-
resentation only.
Double insulation when servicing use
only identical replacement parts.
CLASS 1 LASER PRODUCT
APPAREIL À LASERDE CLASSE 1
PRODUCTO LASER DE CLASE 1
This product contains a low
power laser device.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Please Read and Save for Future Reference.
Some of the following information may not apply
to your particular product; however, as with any
electronic product, precautions should be observed
during handling and use.
Additional Safety Information
•
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Always leave sufficient space around the product
forventilation.Donotplaceproductinoronabed,
rug, in a bookcase or cabinet that may prevent air
flow through vent openings.
•
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (Including amplifiers) that produce
heat.
•
•
•
•
Donotplacelightedcandles,cigarettes,cigars,etc.
on the product.
Connect power cord only to AC power source as
marked on the product.
Care should be taken so that objects do not fall
into the product.
•
Do not attempt to disassemble the cabinet. This
product does not contain customer serviceable
components.
•
•
Only use attachments / accessories specified by
the manufacturer.
If your product operates on batteries, adhere to the
following precautions:
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong is provided for your safety. If the provided
plug does not fit into your wall outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
A. Any battery may leak electrolyte if mixed with a
different battery type, if inserted incorrectly, or if
all batteries are not replaced at the same time.
B. Any battery may leak electrolyte or explode if
disposed of in fire or an attempt is made to charge
a battery not intended to be recharged.
C. Discard leaky batteries immediately. Leaking
batteries can cause skin burns or other personal
injury.Whendiscardingbatteries,besuretodispose
of them in the proper manner, according to your
state/provincial and local regulations.
•
D. Batteryshallnotbeexposedtoexcessiveheatsuch
as sunshine, fire or the like.
•
•
•
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the
power cord or plug is damaged,
liquid has been spilled or objects
]
have fallen into the apparatus, the
apparatus has been exposed to
rain or moisture, does not operate
normally, or has been dropped.
Portable Cart
Warning
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
•
Full high-definition video playback at up to 1080p resolution for an amazing viewing experience.
Upconversion of standard definition DVDs for enhanced picture quality at up to 1080p over an HDMI
connection.
•
•
•
•
Rich multi-channel surround sound.
Easy and simple HDTV connection using a single HDMI cable (cable not included).
Multiple outputs for connecting your home theater system or amplifier.
PIP functionality that lets you display primary and secondary video at the same time (if available on the
Blu-ray Disc).
•
•
Pop-up menu display without interrupting playback (if available on the Blu-ray Disc).
HDMI 1080p/60fps output (Blu-ray Disc only) that provides smooth playback of video with a frame rate
of 60 frames per second (TV must be connected with an HDMI cable and be compatible with 1080p 60
frame).
Connections and Setup
What’s Included
Left and right front
speakers
Remote control and 2
AAA batteries
Subwoofer
Left and right Sur-
round speakers
Center speaker
One Pig-Tail
antenna wire
Composite
video cable
Main unit (receiver)
Things to Consider before You Connect
•
Ensure that the mains (AC power) supply in your house complies with that indicated on the identification
sticker located on the back of your unit.
•
Installyourunithorizontally,awayfromanysourceofheat(fireplace)orappliancescreatingstrongmagnetic
or electric fields. The components of this unit are sensitive to heat. The maximum ambient temperature
should not exceed 35°C / 95°F.
•
•
Leave enough space around the unit to allow adequate ventilation: 10 cm/4 inches on either side and above
the top, and 5 cm/2 inches at the rear.
The humidity of the room should not exceed 75%. If you have to use the unit outdoors, do not expose it
to rain or splashing water. The apparatus should not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, should be placed on the apparatus.
•
Moving the unit from a cold place to a warm one can cause condensation on some components inside
the unit. Let the condensation disappear on its own before turning the unit on again.
Before moving the unit, make sure the disc tray is empty.
Where the mains plug or an appliance coupler is used as a disconnect device, the disconnect device shall
remain readily operable.
•
•
•
Other important use and cleaning information at the end of the booklet.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
Connecting the Antenna
FM antenna
Method 2 (good)
Component video jacks (Pr, Pb, Y)
•
The component video jacks are color-coded
green, blue and red.
•
Additionalcomponentvideocables(notsupplied)
are required. They are usually color-coded green,
blue and red.
Connect the component video OUT jacks on the
unit to the component video IN jacks on your TV.
The FM antenna connects to the FM terminal on the
system’s back panel. It must be hooked up in order
to receive clear reception.
•
Connecting to your TV
Method 1 (best)
Method 3 (basic)
Composite video jack (yellow)
•
•
HDMI
• Connect the HDMI OUT jack on the rear of the unit
to the HDMI IN jack on your TV using a HDMI cable
(not included).
This video jack is color-coded yellow.
Use the video cable with yellow plugs (supplied)
for good picture quality.
• You can select the resolution of the player’s HDMI
output signals (HDMI Auto, 1080p, 1080i, 720p,
480p and 480i) to match your TV’s resolution
capabilities, please see instructions on page 21 for
details.
•
Connect the video OUT jack on the unit to the IN
jack on your TV.
TV
VIDEO IN
Y
Method 2
PB
Component
Video Cable
(not supplied)
VIDEO IN
P
R
Method 1
TV
Video Cable
included
Method 3
HD MI
To HDMI
input
Green Blue Red
HDMI cable
(not supplied)
To HDMI
output
Notes
•
If one of the devices is not working, check that all
the cables have been inserted properly into the
jacks.
Notes
•
If your component has only one input for audio
(mono), connect it to the left (white L/Mono)
audio jack on the TV and don’t connect the right
audio part of the cable.
•
Refer to the owner’s manual of the connected TV
as well.
•
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
• If your television is a high definition television
with an HDMI input, we highly recommend you
use use the unit’s HDMI output to get the highest
possible video resolution.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
Connecting AUDIO IN from External Connecting your player to a wired net-
work router (optional)
Sources such as TV
Method 1 (best)
Using Digital Optical Input
Connect components capable of outputting
Dolby digital surround sound (e.g. TV or SAT/Cable
Box) or standard PCM (stereo) format digital signals.
Use a fiber optical cable for this digital audio con-
nection. (Cable not included).
Connect an Ethernet cable (CAT5 or better with
RJ45 connector) to the ETHERNET jack on the back
of your player and to an Ethernet jack on a network
hub or broadband router.
Hub or broadband router
LAN
Press OPTICAL button on remote control or
SOURCE button on main unit to select OPTICAL
input.
LAN cable
(not included)
Notes:
•
•
Do not connect a modular phone cable to the
ETHERNET jack.
Whenpluggingorunpluggingthecable, hold
the connector on the end of the cable. When
unplugging, do not pull on the cable. Press
down the lock tab and pull the connector out
of the jack.
Method 2 (good)
Using AUDIO IN Jacks
Connect the AUDIO IN jacks from the unit to the
AUDIO OUT jacks on TV, SAT/Cable Box, VCR or
other component. Press either SOURCE button on
the main unit or AUX button on the remote control
to select AUX mode.
•
Because there are various connection
configurations, follow the instructions from
your Internet service provider.
Connecting AUDIO OUT to an auxilliary
Audio System (optional connection)
This system has AUDIO OUT jacks allowing you to
connect to auxiliary audio systems such as a second
audio amplifier or perhaps a wireless audio transmitter.
TV
SAT/
AUDIO OUT
VCR
Cable Box
OR
OR
Audio System
AUDIO IN
White
Red
Audio cable
(not included)
Audio cable
(not included)
Red
White
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
Connecting the Speakers
Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each
speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the terminal
and insert the wire. Release the tab to lock wire in the terminal.
Center Speaker
Front Speakers
Right
Left
Subwoofer
Green and Black
Purple and Black
Red and
Black
White and Black
Insert
Press
Gray and Black
Right
Blue and Black
Release
Left
Rear Speakers
(Surround Sound)
To adjust each speaker volume level for optimum listening experience.
(1) Press LEVEL button on the remote control to select FL (front Left speaker).
(2) Press or buttons to adjust the value up or down (between -10dB and +10dB).
(3) Repeat step (1) and (2) for the other speakers FR, CT, SW, SL, SR.
Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume
Setting.
Note:
When connecting the speakers, make sure the polarities (“+”speaker wire to“+”on the receiver)
of speaker wires and terminals match. For example, red wire to red terminal on the receiver. If the
cords are reversed, the sound will be distorted. Do not let the speaker wires touch each other, it
will damage the system’s amplifier.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
Positioning Speakers
Front Speaker Placement
For best results, follow the speaker placement
below.
3
1
Alignment
Align the center speaker evenly with (A) or slightly
behind (B) (the left and right speakers), but not
ahead of them.
2
1
4
3
Courtesy Dolby Laboratories
1. Left, Right (Front Speakers)
Front speakers carry primarily music and sound
effects.
2. Center
In surround mode, the center speaker carries most
of the dialog as well as music and effects.
It should be set between the left and right
speakers.
Angle
Place the left and right speakers to form a 45-degree
angle with your favorite viewing position to dupli-
cate the soundtrack mixer’s perspective.
3. Surround (Rear Speakers)
The surround speakers’ overall sound balance
should be as close as possible to the front speakers.
Proper placement is vital to establish an evenly
distributed sound field.
Height
The three front speakers should be as close as pos-
sible to the same height. This often requires placing
the center speaker directly on top (A) or beneath (B)
the TV set.
4. Subwoofer
A subwoofer is designed to reproduce powerful low
bass effects (explosions, the rumble of spaceships,
etc.).
A
B
Note:
Center speaker provided with this unit is
magnetically shielded to protect your TV
set. It is not recommended to place speak-
ers without magnetic shield near the TV
set.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Setup
No adjacent walls
Better Surround Placement
Surround speakers can go on stands facing each
other to approximate sidewall mounting (A), or to
the sides or rear of the viewing area, aimed upwards;
they can go right on the floor, or preferably, a few
feet off the floor such as on end tables (B).
Location
If possible, place surround speakers to either side of
the listening area, not behind it.
Height
If space permits, install surround speakers 2-3 feet above
viewers. This helps to minimize localization effects.
Aiming
Aim surround speakers straight across the room,
not down at viewers, to help create a more open,
spacious surround sound field.
Test Tone/Channel Balance
Channel Balance
Your receiver is equipped with a test signal generator
to help balance the audio level for each channel (see
Page 8 for details).
Level Adjustment and Surround Channel Level
Expectation
Alternative Surround Placement
Even though you adjust the surround channel to be
as loud as the others on the test signal, you may find
that surround channels seems quieter for actual TV
and Movie content. This is because producers use
surround for subtle atmospherics and ambience,
and only rarely for special effects.
Rear wall
If rear wall mounting is the only choice, aim the
speakers at each other (A), towards the front (B) or
towards the sidewalls (C, D).
Experiment with placement until sounds seem to
surround you, rather than come from behind you.
Overview of Controls - Front Panel Controls
Press to open or close
the disc tray.
Switch the unit Adjust the
on and off.
volume.
Start/pause
playback.
Select the input sources.
Press repeatedly to select:
BD/USB, OPTICAL, AUX,
TUNER.
Connect a USB flash
drive to this port.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of Controls
ON/OFF
Press to turn on your unit, or put your unit in standby
mode. When your unit is in standby mode, power is
still entering your unit. To disconnect power, unplug
the power cord.
OPEN/CLOSE Press to open or close the disc tray.
When playing a Blu-ray Disc that has a Java application,
R(red),
G(green),
presstocontrolplayback. Formoreinformation, seethe
documentation that came with the Blu-ray Disc.
B(blue),
Y(yellow)
Numbers
In playback mode, press GOTO button, then press
the number buttons to enter a title, chapter, track,
or time.
CLEAR
GOTO
VOL+/-
MUTE
Press to clear an input.
Press to search for a title, chapter, track or time.
Press to increase or decrease the volume.
Press to turn off sound. Press again to turn the sound
back on.
POP UP
During Blu-ray Disc playback, press to open a menu that
lets you control Blu-ray Disc playback.
During DVD playback, press to open the DVD title menu
(if available).
SKIP
/
Presstogotothenextorpreviouschapter(Blu-rayDisc/
DVD) or track (CD).
In tuner mode, press to go to the next higher /lower
preset station.
Navigate through the menus. The left and right arrows
also tune the radio frequency in the tuner mode.
,
/TUNE
/TUNE
,
OK
Confirms your selection.
EXIT
Press to return to the previous menu.
When in a Menu or file browser window, you can press
this button to move you back to a previous menu level
or folder level.
REV
Press to fast reverse.
FWD
SETUP
Press to fast forward.
Press to access the Dimmer (DIM) and Sleep (SLP)
setting (the settings will be shown of the unit’s front
panel display).
Dimmer/Sleep Setup
Press this button and use
display window brightness level or the current Sleep
setting, then use buttons on the remote control
/
buttons to show the
/
to change the current setting.
STOP
PLAY
STEP/
Press to stop playback.
Press to start or resume playback.
Press once to pause playback.
Press twice, then each time you press this button, the
picture advances one frame.
LEVEL
INFO
Toggle channels for different level settings. Adjusts the
value using or
.
Accesses the Info menu.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of Controls
MEM/ANGLE Stores a station in tuner mode.
Accesses the camera angle function for Blu-ray or DVD
discs if available.
ZOOM
Press to zoom in on the video. Each time you press this
button, the magnification level changes. This button is
only used for DVD discs .
REPEAT
Press to repeat the current title, chapter, track, or
repeat all.
A - B
PiP
Performs point-to-point repeat playback on DVD.
Press to turn PiP (picture in picture) mode on or off. This
function is only available by Blu-ray discs if available
on disc.
AUDIO
Accesses the audio function. PiP Audio can be selected
through cursor if secondary Audio is available on the
Blu-ray Disc.
SURROUND In AUX/OPTICAL/TUNER mode, press to show current
sound mode
(CH 5.1or STEREO) on the front of Blu-ray disc player
display.
To change the current setting, first press the
SURROUND button, then use
/
buttons on the
remote control to select STEREO or CH5.1.
SUBWOOFER Press to display current Subwoofer setting (SOFT/
PWRFUL/STRONG/BALANCEl).
To change settings, first press to access the current
Subwoofersetting,thenuse
/
buttonsontheremote
control to change the current setting.
MENU
Accesses the disc menu during playback (on DVD).
SUBTITLE
Accesses the subtitle function.
PiP Subtitle can be selected through cursor if secondary
subtitle is available on the Blu-ray Disc.
AUX
Press to select AUX input source.
Press to select OPTICAL input source.
Press to select TUNER mode (FM radio).
Press to select the BD/USB mode.
OPTICAL
TUNER
BD/USB
Note:
Insert the two “AAA” (included with this unit) batteries into the
remote control prior to use.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
When turned on for the first time or after resetting 4. Press or button to select HDMI Auto, 1080p,
it to the factory default, the Quick Setup menu will
pop up as following.
1080i , 720p, 480p or 480i and press OK.
(For details about the Resolution, please see page
21.)
Would you like to do Quick Setup?
5. Press
button to select “Next” and press
OK, then the display for TV Aspect selection
appears.
Yes
No
TV Aspect
16:9 Wide
Follow the below steps to make the basic settings for
using the Blu-ray player.
16:9 Pillarbox
1. Press OK to perform Quick Setup.
• To exit Quick Setup, press button to select
“No”and then press OK.
4:3 Pan and Scan
4:3 Letterbox
The display for Player Menu Settings selection
appears.
Next Return
Player Menu Settings
6. Press
or
button to select 16:9 Wide, 16:9
Pillarbox, 4:3 Pan and Scan or 4:3 Letterbox and
press OK.
English
(For details about theTV Aspect, please see page
21.)
French
Spanish
7. Press button to select “Next”and press OK.
The display for “Quick Setup complete” appears
and press OK to exit the setup.
Next Return
2. Press or button to select English, French or
Notes
Spanish and press OK.
•
You can restore the settings to -the factory
settings (see page 24).
3. Press
button to select “Next” and press
OK, then the display for Resolution selection
appears.
•
You can run Quick Setup again from “Quick
Setup“ in “Settings”(see page 25).
Resolution
HDMI Auto
1080p
1080i
720p
480p
480i
Next Return
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Blu-ray Disc or DVD
Regional Coding
the beginning of the disc.
Accelerated play
This unit has been designed to play back BD-video
encoded for region “A” and DVD-video encoded for
region “1”. You cannot play back BD-video or DVD-
video that are labeled for other regions. Look for the
symbols on the right on your BD-video or DVD-video.
If these region symbols do not appear on your BD-
video or DVD-video, you cannot play back the disc in
this unit. The letter or number inside the globe refers
to region of the world. A BD-video or DVD-video
labeled for a specific region can only be played back
in the unit with the same region code.
•
To fast forward or fast reverse, press
forward) or (fast reverse).
(fast
•
Each time you press one of these buttons, the
fast-forward or fast-reverse speed increases from
Fast X2, Fast X4, Fast X8, Fast X16, Fast X32, Fast
X64, to Fast X128. Press
playback.
to resume normal
Changing chapter/track
•
•
•
Press either the SKIP
to the desired direction.
or
button according
Basic playback (Blu-ray Disc or DVD)
1. Turn on your television set.
2. Press ON/OFF button on the remote control or
ON/STANDBY button located on the unit’s front
panel. Press BD/USB button on the remote
control.
Press the SKIP
current chapter or skip to previous chapters.
Press the SKIP button to skip to the beginning
of the next chapter.
Displaying Blu-ray Disc information
button to skip to the start of the
•
Press INFO button, your unit displays information
about the Disc, such as type of disc, elapsed time
of the current title, total time of the current title,
total number of chapters.
3. Press
tray.
OPEN/CLOSE button to open the disc
4. Place a disc onto the disc tray with the label side
up.
•
Press INFO button again to exit.
5. Press OPEN/CLOSE button again to close the
disc tray.
Note: The information displayed for discs other
than Blu-ray Discs will be different.
6. After loading a disc, playback starts automatically,
or the disc menu appears. If the disc menu appears,
select the Play option and press OK button to
begin playback if “Optical Disc AutoPlay” is set
on. (see page24)
Playback
•
To start playback, press button.
Pause
•
•
To pause playback, press button.
To resume normal playback, press button.
Frame advance
•
•
Press PAUSE twice. “Step Fwd”is displayed.
Each time you press PAUSE button, the picture
advances one frame.
•
Press to resume normal playback.
Stop
•
To stop playback, press button. The Settings
menu is displayed.
•
To resume playback, press
on the remote
control or press
or
button to select DVD/
BD-ROM, then press OK button. Depending on
the disc, playback starts where it stopped or at
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Functions
Searching for a title, chapter or elapsed time
1. During playback, press GOTO button one or
more times to select a search mode.
• Press once to select the Goto Title mode.
• Press twice to select the Goto Chapter mode.
• Press three times to select the Goto Time
mode.
2. Press the number buttons to enter the title
number, chapter number or time, then press OK
button. Your unit goes to the title, chapter, or
time you entered.
Selecting a play source
•
Press SOURCE button on the front panel of the
unit repeatedly to select BD/USB, OPTICAL,
AUX, TUNER.
•
•
•
•
Press BD/USB button on the remote control to
select BD/USB mode.
Press OPTICAL button on the remote control to
select OPTICAL mode.
Press AUX button on the remote control to select
AUX mode.
Press TUNER button on the remote control to
select TUNER mode.
Repeating a title, chapter or CD track
•
Press REPEAT button one or more times to select
a repeat mode.
Selecting the audio mode
1. Press AUDIO button. Your unit displays audio
channel information, such as 01/03 Eng Dolby
Digital. 01 indicates the currently selected
audio channel. 03 indicates the total number of
audio channels. Eng (English) indicates the audio
language. Dolby Digital describes the currently
selected audio format.
Using PiP (picture-in-picture) mode
Some Blu-ray Discs are compatible with picture-in-
picture (PiP) mode. In PiP mode, the primary video
is displayed on the full screen, and the secondary
video is displayed in a small window.
2. Press button and press or button to select
an audio mode, then press OK button.
Primary video
Selecting the camera angle (Blu-ray Disc and
DVD disc)
Some discs offer different camera angles for specific
scenes. To change the camera angle:
Secondary video
1. Press MEM/ANGLE button on the remote
control. The selected angle will be displayed on
the display bar at the top of the TV screen.
2. Press button and press or button to select
the desired angle, then press OK button. If the
disc was recorded using a single camera angle,
this function is not available.
•
•
Press PiP button to turn PiP mode on or off.
Press AUDIO or SUBTITLE button to turn the
audio/subtitle for the video in the PiP window on
or off. Then use cursor buttons and OK button to
select your preferred options.
Notes
•
The available options of Audio vary from different
disc format.
Selecting subtitles
You can display subtitles on the TV screen and
select a subtitle language from those included on
the DVDs.
•
PiP Subtitle is not available for all discs. It only
applies to Blu-ray discs that supports picture-in-
picture features.
1. Press SUBTITLE button on the remote control.
The selected language will be displayed on the
display bar at the top of the TV screen.
2. Press button and press or button to select
your desired language, then press OK button.
•
Some discs allow you to turn PiP on/off only via
the disc menu.
Using a disc popup menu
1. During Blu-ray or DVD playback, press POP UP
button. The Blu-ray popup menu or the title
menu of DVD disc opens.
PiP Subtitle can be selected through cursor if
secondary subtitle is available on the Blu-ray Disc.
2. Press
,
,
or buttons to select an option,
then press OK button.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an audio CD
Playing files on a data disc
1. Press ON/OFF button on the remote control or
ON/STANDBY button located on the unit’s front
panel.
2. Press OPEN/CLOSE button to open the disc tray.
3. Place a CD on the disc tray with the label facing
up, then press OPEN/CLOSE button to close
the disc tray. It may take a few seconds for the CD
to load.
To view JPEG files
1. Press
or
button to select Pictures, then
press OK button.
2. Press
,
,
or button to select a file (or
a folder) and press OK or
playback. If you selected a folder, the files in this
button to start
folder are displayed. Press
select a file and press OK or
playback.
3. Press button to return to the Pictures menu.
4. Press or button to select an option, then
press OK button.
or
button to
button to start
4. After loading a disc, playback starts automatically.
5. To eject the CD, press OPEN/CLOSE button.
To control audio CD playback:
•
•
To start playback, press button.
•
Settings - This option enables you to define
Slide Show Effects (None, Horizontal Scroll,
Fade and Shutter) and Slide Show Delay (5
Seconds, 2 Seconds, 1 Seconds, No Delay, 10
Seconds, 15 Seconds and 30 Seconds). After
To pause playback, press button. The sound
is muted when your unit is in pause mode. To
resume normal playback, press button.
To stop playback completely, press button. To
•
start playback again, press
button. Playback
setting, press
to highlight OK and then
starts at the beginning of the CD.
press OK button to confirm.
•
•
•
To fast-forward, press
normal playback, press button.
To fast-reverse, press
normal playback, press button.
button. To resume
•
•
Main Menu - Returns to the main menu.
Previous folder - Returns to the previous
folder.
button. To resume
•
Start Slide Show - This option enables you
to view picture (files) one after another
automatically.
Press either the
or
button according to the
desired direction.
Press the
button to skip to the start of the
current track or skip to previous tracks. Press the
button to skip to the beginning of the next
track.
•
To select a track, press GOTO button once, enter
the track number with the number buttons, then
press OK button.
Playing files on a data disc
You can play JPEG files that have been recorded on
a CD-R or CD-RW on this unit.
Insert a data disc containing picture files. A selection
menu appears on the screen:
Settings
Connected
Pictures
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching movies with Netflix
Using a USB device
Playing USB flash (“thumb”) drive
Insert a USB thumb drive containing picture into
your unit. A selection menu appears on the screen:
Watching Movies with Netflix
To use Netflix service, connect this player to your
network, and configure the network settings if they
are not finished yet. (See “Network Setting” section
on page 24).
Launching Netflix movie
1. In home menu, press
or
button to select
Settings
Connected.
2. Press button and then press OK button to
enter.
Connected
Creating Netflix account
Pictures
If you are not a Netflix Member: Select “no”. Read
the instructions displayed on the TV screen, and
up to create your account, then select “I’m now a
member”.
Press
OK button.
or
button to select Pictures, then press
(To play pictures, please see Playing files on a data
disc for details.)
If an optical disc containing picture files is inserted
at the same time, the system will enter the source
selection screen and you can press
or
button
to choose Optical Disc or USB .
If you choose Optical Disc option, please follow the
operation instructions in “Playing files on a data
disc”.
If you are a Netflix Member: Select “Yes”.
Activating Netflix player
To play streaming video via Netflix service, Netflix
player needs to be activated. Read the instructions
netflix.com/activate on your PC. Sign in to your
Netflix account, if necessary. Enter the activation
code displayed on the TV screen.
Notes
•
It is recommended to plug the USB flash
drive when the unit is off.
•
It does not support USB hard disc mass
storage device, multi-card reader and other
USB computer peripheral.
•
•
Do not disconnect the USB flash drive when
you are playing it, it may corrupt the data.
If you cannot easily insert the USB device,
you may have inserted it incorrectly. Try to
turnover the device and then insert again.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching movies with Netflix
Preparing Instant Queue
To play streaming video via Netflix service, Netflix
service, you must have an appropriate Netflix
subscription and the player needs to be registered
for Netflix service. See previous section for details
on how to activate.
Note
Resolution of video streamed from Netflix
varies depending on communication speed or
bitrate of each content, etc.
Now you can view Netflix streaming video.
After having activated Netflix player and prepared
Instant Queue, movies and TV episodes in your
Instant Queue appear on the TV screen. Select
your desired one using the remote control of the
player. You can control Netflix streaming video with
the following buttons of the remote control of this
player:
(Play) To start playing movie.
To pause playback while in PLAY mode.
(Stop) To stop playing and return to a list of
movie titles.
(Pause) To pause playing movie.
To start playing while in PAUSE mode.
To pause playing and open a list of
scenes. Pressing further proceeds to
the next scene.
(Right)
(Left)
To pause playing and open a list of
scenes. Pressing further proceeds to
the previous scene.
(Up) To stop playing and return to a list of
movie titles.
(FWD) To pause playing and open a list of
scenes. Fast forward play starts.
(REV) To pause playing and open a list of
scenes. Fast reverse play starts.
OK
Allows you to enter or exit “trick play
mode”. Trick Play mode allows you
to skip to a specific scene in a movie
quickly
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying BD-Live
AUX/OPTICAL
Some BD-ROMs contains BD-Live features that You can connect Audio or Audio-Video devices such
as a TV, Game System, VCR, Satellite or Cable Box
to this unit using the AUDIO IN jacks at the back of
the unit. The AUX input provides an analog audio
connection especially suitable for older devices. The
OPTICAL input provides a digital audio connection
which will allow you to experience true digital
surround sound, if the connected device is capable
of providing Dolby digital surround signals. This
unit will take the audio from the connected device
and play the audio through the speakers.
can be downloaded to the external memory (local
storage) for enjoyment.
In order to access BD-Live functions, the Blu-ray
disc player must be properly configured for BD-
Live internet access, and it must be equipped with
additional memory (USB Flash Drive).
1. Insert a USB Flash Drive of at at least 1GB capacity
(not supplied) into the USB jack on the front
panel of the Blu-ray disc player.
•
•
The USB device is used as the local storage.
Make sure that the USB device is properly
inserted into the Blu-ray disc player.
Connecting Auxiliary Components
Refer to Connecting AUDIO IN from external
sources such as TV for details on connecting the
auxiliary components to the unit (see page7).
•
If there is not at least 100Mbyte of free space
on the USB device, you should choose “Erase
Blu-ray Storage” from the BD-Live settings
(see page 25).
Selecting AUX/OPTICAL Mode
Press either the SOURCE button on the main unit
or AUX/OPTICAL button on the remote control to
select AUX or OPTICAL input.
2. Connect the Blu-ray disc player to a network
(see page 7).h
Sound Output in AUX or OPTICAL
Mode
3. Turn the Blu-ray disc player on.
4. Set “BD-Live Internet Acces” to “Limit Access” or
“Always Allow Access”in BD-Live Settings
•
You may change the Surround Sound setting
to STEREO mode if you like (see instructions
under Overview of Controls). However, we
recommend you leave the system in full surround
(“CH 5.1”) mode
(see page 25).
5. Insert a BD-ROM with BD-Live and select the BD-
Live selection following the instructions on the
disc menu.
•
If the auxiliary audio signal is mono, there will be
no output from some speakers in full surround
mode.
•
The operation method differs depending on
your BD-ROM. Please refer to the instructions
coming with the disc.
Note: Optical input cannot decode DTS signals.
Notes
• Do not remove the USB device when using the
BD-Live function.
• Depending on your connection environment, it
may take time to connect to the Internet or the
Internet may not be connected.
IMPORTANT!
Many BD-Live compatible discs require content
to be downloaded onto USB flash drive in order
to access the available BD-Live features.
A USB flash drive with at least 1GB of free space
needs to be inserted prior to inserting the BD-
Live compatible disc.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
This unit has a built-in digital-tuning FM radio.
Manual tuning
Tips:
1. Connect the FM antenna at the back of the unit.
2. Press TUNER button.
•
•
When a strong FM signal is tuned, ST is
displayed.
3. Tune a station by pressing TUNE
/
buttons
If there is any interference, change the
antenna’s position until ideal sound
reception is obtained. TV and other
electronic devices could be the cause
of interference, so try to position the
antenna away from them.
repeatedly until the desired station is found.
Alternatively, you can press and hold the same
button down for about two seconds to activate
the automatic search function. In this mode the
unit will automatically tune frequencies until it
finds a station.
•
A weak signal can affect the Automatic
4. Repeat step 3 to tune to another radio station.
preset
programming
function’s
efficiency. Adjust the antenna for better
reception and a more efficient search.
Automatic preset programming
1. Press TUNER button to enter Tuner mode.
2. Press and hold TUNER button for two seconds to
start automatic preset programming.
3. Radio frequencies will be scanned and stored
automatically. When all the available radio
stations are stored or all 30 FM memory locations
are full, the auto preset programming function
will stop.
Manual preset
1. Tune to a radio station (see Manual tuning for
details).
2. Press MEM/ANGLE button. While the Program
Preset number is still flashing, input your desired
preset number using the numeric buttons, then
press MEM/ANGLE button to store it.
Retrieving preset stations
1. Press TUNER button to enter the Tuner mode.
2. Press
/
buttons to search up or down for
the preset stations or directly press the numeric
buttons.
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
The Settings Menu
The Settings menu appears automatically when the Resolution
unit is in BD/USB stop mode. Use or button to
select Settings.
You can define the video output resolution in this
option.
HDMI Auto: If your TV is
a
high-definition TV
Info
(HDTV), is connected to the HDMI
jack on your player and you want your
player to set the output resolution
based on information exchanged
between the TV and your player over
the HDMI cable.
If the TV is a high-definition TV (HDTV)
capable of 1080p (any frame rate)
connected to the HDMI jack on your
player.
Quick Setup
BD-ROM
BD-Live
Dispaly
Settings
Audio
Speaker
Connected
1080p:
Language
Language Setting
1080i:
720p:
480p:
480i:
If your TV is
(HDTV) capable of 1080i only.
If your TV is high-definition TV
a
high-definition TV
1. In the main menu of Settings, press button,
then use or button to select Language.
2. Press button and press or button to select
an option, then press OK button.
a
(HDTV) capable of 720p only.
If your TV is an enhanced-definition TV
(EDTV).
3. Press
or
button to select the language
you want, then press OK button to confirm your
selection.
4. Press or EXIT button to go to the previous
If your TV is
a
standard-definition
NTSC (analog) TV.
menu.
Notes
• Selecting a resolution your TV does not support
could result in an unstable picture or loss of the
picture. See the documentation that came with
the TV to find the resolutions the TV supports.
• Only the HDMI output on your unit supports
1080p video output at any frame rate. If the TV is
connected to the component output, the video
output is limited to 1080i or lower.
Notes
• If the selected language is not available on a
disc, the disc’s language will be used instead.
• If the language chosen is available, it is
automatically selected when you display
the subtitles or press SUBTITLE button on
the remote control. Otherwise, the subtitle
language indicated on the disc is selected.
TV Aspect
16:9 wide, 16:9 Pillarbox, 4:3 Pan and Scan, and 4:3
Letterbox are available for your choice.
Display Setting
Deep Color
1. In the main menu of Settings, press button,
then use or button to select Display.
2. Press button and press or button to select
an option, then press OK button.
This option allows you to turn off the Deep Color
(color depth) setting for video signals output from
the HDMI OUT jack.
3. Press or button to select the desired option,
and then press OK button to confirm your
selection.
4. Press or EXIT button to go to the previous
menu.
Connecting the player to a TV that supports Deep
Color allows more accurate color reproduction than
when connecting it to a TV that does not support
Deep Color. It is recommended to set this option Off
if the picture is unstable or colors appear unnatural.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
The Settings Menu
Film Mode
Digital Output:
Movies are recorded on film at a rate of 24 pictures
(frames) per second. Many of the movies on Blu-ray
discs are recorded on the discs at this frame rate.
However, not all TVs can display 24 progressive
frames/second of video. If the TV cannot display this
frame rate, you need to turn off Film Mode.
•
•
•
PCM Stereo — Sets the HDMI audio format to
PCM Stereo, this is useful if you have an audio
receiver connected that is not a 5.1 channel
receiver.
Bitstream Legacy — Sends a DTS or Dolby
Digital bitstream from the disc over the HDMI
connections. Blu-ray audio is limited to the
soundtrack for the main movie (no PIP audio).
Note
Only your unit’s HDMI output supports 1080p video
output at any frame rate. The component outputs
are limited to 1080i, regardless of the Film Mode
setting.
Bitstream Mixed — Sends a mixed (PIP audio
and movie audio) DTS audio stream over the
HDMI connections. This mode is primarily
intended for use when you want to hear both
PIP audio and the movie audio over an external
Audio Receiver.
Audio Setting
1. In the main menu of Settings, press button,
then use or button to select Audio.
•
PCM 5.1 — Sends a PCM audio signal of up to
5.1 channels over the HDMI connection.
2. Press button and press or button to select
an option, then press OK button.
3. Press
or
buttons to select the desired
Dynamic Range Control:
option, and then press OK button to confirm
your selection.
4. Press or EXIT button to go to the previous
menu.
Dynamic Range Control allows you to make the
loud parts of a movie’s audio track quieter than they
would be in the theatre, without making the dialog
of the actors any quieter.
PCM Downsampling
If you chose to use an external Surround Sound This would be useful, for instance, when you want
Receiver to play audio via your HDMI connection, to watch a movie in the evening when others might
you can choose a downsampling rate to match the be sleeping.
capabilities of your Receiver.
Note: This setup menu item has no effect unless:
Notes
•
You have selected “Bitstream Mixed” in the Blu-
ray disc player’s audio setup menu.
•
The PCM Downsampling and Digital Output
settings are only necessary if you don’t plan to use
you Blu-ray Home Theater for playback of audio,
and instead plan to use an external Audio Receiver
for playback of HDMI audio.
When Dynamic Range Control is set to Off, movie
soundtracks are played with the standard dynamic
range.
•
Incorrectly setting the digital audio output’s PCM
sampling rate too high may result in unpredictable
audio playback.
When movie soundtracks are played at low volume or
from smaller speakers, you can set Dynamic Range
Control to On. Your player applies appropriate
compression to make low-level content more
intelligible and prevent dramatic passages from
getting too loud.
Selecting the “Auto” option turns on the Dynamic
Range Control for all BD movie soundtracks except
Dolby TrueHD.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
The Settings Menu
Stereo Downmix:
Allows you to downmix the multi-channel audio
into fewer channels.
Speaker Setting
Once the speakers are connected to the system,
you can set the speakers to obtain the best possible
surround sound.
•
Stereo (LoRo) — Downmixes the multi-channel
audio into two channel stereo. Choose when the
Blu-ray disc player is connected to the equipment
that does not support virtual surround function
such as Dolby Pro Logic.
1. In the main menu of Settings, press button,
then use or button to select Speaker, then
press OK.
2. Use
,
,
or to highlight the desired speaker,
•
Surround Encoded (LtRt) — Downmixes the
multichannel audio into surround compatible
stereo. Choose when the Blu-ray disc player
is connected to the equipment that supports
virtual surround function such as Dolby Pro
Logic.
then press OK.
3. Press or to select the desired audio signal,
and then press OK to confirm.
4. Press or EXIT to go to the previous menu.
Note
Setting a speaker to“Off”will result in no sound being
delivered to this speaker. We highly recommend you
leave all speakers set to “On”.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
The Settings Menu
System Setting
Network Setting
1. In the main menu of Settings, press button,
then use or button to select Network.
2. Press button.
1. In the main menu of Settings, press button,
then use or button to select System.
2. Press button and press or button to select
an option, then press OK button.
3. Press or button to select Wired, then press OK
button. The IP Settings screen appears. If the network
connection is active, Link Up appears next to Link
Status. If the network connection is not active, Link
Down displays next to Link Status.
3. Press
or
buttons to select the desired
option, and then press OK button to confirm
your selection.
4. Press or EXIT button to go to the previous
menu.
4. Press
or
button to select IP Mode, then
press OK button.
Optical Disc AutoPlay
If On is selected, the player will play a disc automatically
when the unit is turned on, or if you press the BD/USB
button.
IP Settings
Link Status
MAC Address
IP Mode
Link Down
xx:xx:xx:xx:xx:xx
Dynamic
0.0.0.0
Screen Saver Duration
This Blu-ray disc player has a screen saver feature
when your player is inactive. You can set the interval
time you want your player to wait before activating
the screen saver.
IP Address
Subnet Mask
Gateway
0.0.0.0
0.0.0.0
Primary DNS
0.0.0.0
Auto Power Down
Secondary DNS
Apply
0.0.0.0
This power-saving option defines the time duration
upon which the unit shuts down automatically as a
result of inactivity.
Cancel
5. Press
can select:
or
button to select an IP Mode. You
Restore Factory Defaults
If you choose OK in the prompt message box, all
settings will be restored to the factory defaults.
•
•
Dynamic — Uses DHCP to automatically obtain
an IP address.
Manual — Lets you manually configure network
settings, such as IP address, subnet mask, and
gateway settings.
Update Via Network
This option allows to update your product software
via the internet.
•
Off — Disables the network interface.
Info Setting
1. In the main menu of Settings, press button,
then use or button to select Info.
6. Press or EXIT button to go to the previous
menu.
Network Test
2. Press button to display the related information.
Selecting the Network Test will cause the player to
attempt to communicate with your home network,
and if successful, with a known internet address.
If both attempts are successful, your network
connection should be good. If the player can
successfully connect to your home network, but not
to the known internet address, your internet service
may be “down”, or your security firewall may be
blocking access of the player to the internet.
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
The Settings Menu
Troubleshooting
The unit does not switch on.
Quick Setup
1. In the main menu of Settings, press button,
then use or button to select Quick Setup,
and then press OK to confirm.
•
•
Make sure it is plugged in.
Press ON/OFF button on the remote control or ON/
STANDBY button on the front of the unit.
2. Press OK to perform Quick Setup.
The device switches off spontaneously.
•
To save power, the device switches off automati-
cally when it is not being used for more than 30
minutes. Switch it on again.
If the SLEEP SETUP (see page 11 for details) is set
to 30, 60, 90,120 minutes, the device will turn off
automatically once it counts down the sleep
time. If Auto Power Down in System settings is
set to 30, 45, 60 minutes, the device will switch
off automatically if it remains idle and no activities
are made. Switch it on again.
To exit the setup menu:
•
Use button to highlight “No thanks. I’ll go
through the full setup menu later”, and then
press OK.
•
•
Or press button directly.
3. Follow the on-screen instructions to customize
the following settings to your preference:
•
•
Player Menu Settings
TV Aspect
•
Resolution
Blu-ray Disc or DVD does not play
4. After finishing all settings, select Exit and press
OK to exit the setup.
•
Make sure that the disc has the correct region
code.
Some Blu-ray discs will only play over an HDMI
connection.
(Please see page13 for details.)
•
BD-Live
•
•
•
It might be impossible to read the disc.
Insert the disc with the printed side facing up.
Check that the disc can actually be played by this
device.
1. In the main menu of Settings, press button,
then use or button to select BD-Live.
2. Press button and press or button to select
an option, then press OK button.
•
Clean the disc.
3. Press
or
buttons to select the desired
Picture-in-Picture(PiP) does not work on a Blu-
ray Disc
option, and then press OK button to confirm
your selection.
4. Press or EXIT button to go to the previous
•
Make sure that the disc supports PiP mode.
menu.
When playing a BD-Live disc, the screen is black
•
•
Erase BD Storage.
Make sure that the internet connection is work-
ing.
Make sure that the internet cable is connected
securely and correctly to the unit and the internet
jack. Some discs require an Internet connection
to play.
BD-Live Internet Access
•
•
•
Limit Access — Allows Internet access with valid
“BDLive”network access approval.
Always Allow Access — Always allows BD-Live
Internet access.
Prohibit Access — Never allows BD-Live Internet
access.
•
BD-Live Storage
The available storage space is displayed next to BD-
Live Storage.
Cannot connect to the internet
Make sure that the Internet connection is set up
•
Erase Blu-ray Storage
If you choose OK to erase Blu-ray storage, all
bookmarks and BD-Live content saved in memory
will be deleted.
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
correctly.
I can’t find my file in the JPEG listing.
Make sure the file name is valid.
•
•
•
Test the Internet connection to make sure that it
is working.
•
Make sure that the BD-Live Internet Access op-
tion is not set to Prohibit Access.
Make sure that the disc your are playing is a legal
copy.
The remote control does not work or works only
intermittently.
•
•
•
Check that batteries are inserted or change
them.
Aim the remote control at the unit. The infrared
beam must not be blocked or interrupted.
Check that the remote control is configured to
control the device you are trying to operate with
it.
After connecting to the Internet, I cannot down-
load a file
•
•
Erase BD Storage.
Make sure that the internet connection is work-
ing.
The subtitles do not appear.
•
Try a different USB flash drive.
•
•
Check that the BD/DVD disc provides subtitles.
Refer to the section on how to display subtitles.
File was downloaded, but playback from file
pauses
Make sure that the USB flash drive is a USB 2.0 de-
vice. Using a USB1.1 device may cause pausing.
Try a different USB flash drive.
The disc menu language is not the correct one.
•
•
•
The disc menu language has not been set up.
The language of your choice is not available on
the disc.
•
There is no picture.
•
•
•
Check that the TV is operating correctly.
Check the connections.
Select the AV input assigned to the unit on the
TV.
•
Replace the HDMI cable with a better one. A bad
HDMI cable can cause loss of video.
The picture is of poor quality (with snow or
lines).
•
Check the connections.
There is no sound or the sound is of poor quality.
•
•
•
Check the connections.
Make sure the speakers are connected.
Make sure the MUTE function is not on.
No surround sound.
•
Check to see if system is actually in full Surround
mode (see Audio setting & Speaker setting on
page 22, 23). For AUX/TUNER/OPTICAL mode,
press the SURROUND button on the remote
control - the front panel display should indicate
the current setting (STEREO or CH 5.1). If current
setting is STEREO, the surround speakers and
center speaker will be inactive. Press
/
button to change surround mode from STEREO.
Note: Not all discs, media files, or audio sources
provide surround audio, thus lack of audio to
surround speakers may be due to the actual
source being played.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Handling and Caring for Discs
Precautions
•
•
•
•
•
•
•
Handle your discs with care. Hold the disc with
your fingers at the edges or through the hole.
Insert the disc with the label facing up (for a sin-
gle-sided disc).
Place the disc properly into the tray in the allot-
ted holder.
Use a soft cloth to clean discs if necessary, always
wiping from the centre to the edge.
Always put discs back in their cases after use and
store in a vertical position.
Do not close the tray with two discs in it or with a
disc not sitting correctly in the holder.
Do not play cracked, chipped or warped discs nor
try to repair them with adhesive tape or glue.
Do not write on a disc.
Do not move the unit when a disc is being
played.
Use
•
•
•
If your unit has been stored in a cool place for any
length of time, during a journey for example, wait
for about 2 hours before using it.
The openings located on the top and
bottom are for ventilation and must not be
obstructed.
During thunderstorms, we recommend that you
isolate the unit from the electrical supply so that
it is not damaged by electrical or electromagnetic
surges.
•
This unit is designed for continuous use.
Switching off the unit to standby mode does
not disconnect it from the mains supply. To
completely isolate the equipment, remove the
plug from the mains jack as some components
remain connected to the electrical supply.
If you notice any burning or smoke, disconnect
the unit immediately to avoid any risk of
electrocution.
Do not attempt to look inside the unit through the
disk tray opening or any other opening. You may be
electrocuted or exposed to laser radiation.
This unit is for domestic use only and must not be
used for industrial purposes.
Total or partial copying of recordings protected by
copyrightlegislation,withouttheexplicitpermission
of the holder of the rights, contravenes current
legislation. Copying or downloading music files for
sale or any other business purpose constitutes or
could constitute a violation of copyright law.
•
•
•
Do not scratch discs or store them in places ex-
posed to direct sunlight, high humidity or high
temperatures.
•
•
•
Do not use aerosol cleaners, benzene, anti-static
liquids or any other solvent for cleaning discs.
When cleaning, wipe gently with a soft damp
(water only) cloth from the centre to the edge,
avoiding circular motions, which could cause
scratches and interference during playback.
•
•
Compatible Formats
In order to ensure playback, discs must conform
with BD, DVD or CD standards. This unit may not
play some recordings or files due to differences in
recording formats, software used and disc types.
BD-ROM
Cleaning
•
•
•
Use a soft, dry, clean cloth. Regularly dust the
BD-ROMs (Blu-ray Disc Read-Only Memory) are
commercially produced discs and are available in the
same capacities as BD below. Other than conventional
movie and video contents, these discs have enhanced
features such as interactive content, menu operations
using pop-up menus (see below), selection of subtitle
vents at the back or sides.
Using solvents, abrasive or alcohol-based prod-
ucts risks damaging the unit.
If an object or liquid enters inside the unit, un-
plug it immediately and have it checked by an
authorized servicer or service center.
display, and slideshow. Although
a
BD-ROM may
contain any form of data, most BD ROM discs will
contain movies in High Definition format, for playback
on Blu-ray Disc players.
Blu-ray Disc (BD)
A
disc format developed for recording/playing
high-definition (HD) video (for HDTV, etc.), and for
storing large amounts of data. A single layer Blu-ray
Disc holds up to 25 GB, and a dual-layer Blu-ray Disc
holds up to 50 GB of data.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
DVD-Video
JPEG Files
Digital video discs - 12 cm, single or double sided,
single or dual layer. DVDs are high density optical
discs on which high quality picture and audio are
recorded by means of digital signals.
CD-R and CD-RW with JPEG files. Certain JPEG files,
including progressive JPEG files, cannot be read by
this unit.
The total number of files and folders on the disc
should be less than 650. Make sure that files have
the “.jpg” extension. Files without the “.jpg” exten-
sion will not be able to be read by the unit --- even
thought the files are shown as JPEG images on your
computer.
DVD-R, DVD-RW, DVD+R, DVD+RW
Most DVD-R and DVD+R (one recording
only), DVD-RW and DVD+RW discs
(rewritable), depending on the DVD writer
and discs used. Recordings using DVD-R
DVD+Rewritable
and DVD-RW discs must be made in
“Blu-ray Disc”and
are trademarks.
Video DVD mode. Recordings using DVD+RW discs
must be made in accordance with the specifications
for DVD+RW discs with a 4.7 GB capacity.
Netflix is a registered trademark of Netflix Inc.
Audio CDs
Audio CDs (12 cm).
“BD-Live”and “BD-Live”logo
are trademarks of Blu-ray Disc
Association.
CD-R, CD-RW
Most CD-R (one recording only) and CD-RW discs
(rewritable).
Manufactured under license
from Dolby Laboratories. Dolby
and the double-D symbol
are trademarks of Dolby
Laboratories.
CD-Rs written during a multisession recording can
be played, provided that the session has ended
before the disc is played (depending on the write
software).
Manufactured under license
under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and
worldwide patents issued &
pending. DTS and the Symbol
are registered trademarks, &
DTS-HD, DTS-HD Advanced
Digital Out and the DTS logos
are trademarks of DTS, Inc.
Product includes software. ©
DTS, Inc. All Rights Reserved.
However, depending on the condition of the
CD-writer, computer and the disc used, you may
find that not all discs will play. When playing a CD-R
disc, it is normal for the unit to take up to 60 seconds
to recognize the disc before starting to play.
If the disc is not recognized after a period of 120
seconds, remove the disc, and insert it again.
•
•
Do not use its full capacity.
CD-Rs should be preferably used instead of
CD-RWs (rewritable CDs) as, in certain cases, CD-
RW playback may be faulty.
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC.
•
•
Use reliable, good-quality CD write software.
Close all other ahpplications on the computer to
ensure reliable CD-R disc recording.
Java and all Java-based
trademarks and logos are
trademarks or registered
trademarks of Oracle America,
Inc. in the U.S. and other
countries.
Specification
AC power supply:
AC 120V~60Hz
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Internet Content and Services Disclaimer
All internet content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such internet
content and services are provided solely for your personal noncommercial use, and you may not use
such content or services in a manner that has not been authorized by the internet content owner
or service provider. Without limiting the foregoing, unless expressly authorized by the applicable
internet content owners or service providers, you may not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any
content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” AVC MULTIMEDIA IS NOT
RESPONSIBLE FOR YOUR USE OF THE INTERNET CONTENT AND SERVICES, AND DOES NOT WARRANT
SUCH CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY. AVC MULTIMEDIA
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY INTERNET CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND, UNDER
NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL AVC MULTIMEDIA BE LIABLE, WHETHER
IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY
CONTENT OR SERVICES BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party content and services may be terminated or interrupted at any time, and AVC Multimedia
makes no representation or warranty that any content or services will remain available for any period
of time. Internet content and services are transmitted by third parties by means of networks and
transmission facilities over which AVC Multimedia has no control. Without limiting the generality of
this disclaimer, AVC Multimedia expressly disclaims any responsibility or liability for any interruption
or suspension of any content or services made available through this device.
AVC Multimedia is neither responsible nor liable for customer services related to the internet
content and services. Any question or request should be made directly to the respective internet
content and services providers.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
AVC MULTIMEDIA ("AVC") makes the following limited warranty. These limited warranties extend to the
original consumer purchaser and is limited to non-commercial user of the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to be free from defects in materials or
workmanship for a period of one year from the date of their original retail purchase. If the unit fails to
conform to this warranty, we will service the product using new or refurbished parts and products, at
AVC's sole discretion.
During a period of one year from the effective warranty date, AVC will provide, when needed, service
labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the
United States, you must first call our Customer Support Center at 1-877-252-6873, during the hours
listed in the box below. The deternination of service will be made by AVC customer support.
PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or
remanufactured replacements for defective parts or products will be used for repairs by AVC at its
designated Service Center for one year from the defective warranty date. Such replacement parts or
products are warranted for an additional one year from the date of repair or replacement. The Customer
will be required to ship the unit to the Service Center indicated at the time Customer Support is
contacted to make the necessary repairs. The customer is responsible for all transportation charges to
the service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original carton box and packing
material or an equivalent as designated by AVC.
Your Responsibility
(1) You must retain your bill of sale to provide proof of purchase.
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or
Canada.
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or
parts which have been lost or discarded, or damage to product or parts caused by misuse, accident,
improper operation or maintenance, or use in violation of instructions provided with the product,
or to product which has been altered or modified without authorization of AVC, or to products or
parts thereof which have had the serial number removed or changed.
Out of Warranty
In the event your product requires repair after the limited warranty period has expired,
please contact our Customer Support Center at
or
1-877-252-6873
Hours: Monday-Thursday: 9am-7pm, Friday: 9am-5pm, Saturday: 9am-NOON Eastern time.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of the
product to our Product Returns Center.
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
All warranties implied by state law, including the implied warranties of merchantability and fitness for a
particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the
exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and
in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller
with respect to the repair or replacement of any parts. In no event shall AVC be liable for consequential or
incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time within action must be commenced to enforce any
obligation of AVC arising under the warranty or under any statute, or law of the United States or any state
thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied
warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary from state
to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may
be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions
may not apply to you.
For more information on other products and services, please contact our web site at
Important: Also keep your “Bill of Sale”as proof of purchase.
Model no. ..............................................................................
Product name .........................................................................
Type of set ..............................................................................................................................................................................................
Serial no. ................................................................................
Date purchased .................................................................
Invoice no. ................................................................................
Dealer name ............................................................................
FOR SERVICE AND REPAIR, PLEASE VISIT
© 2010 AVC MULTIMEDIA
Need more help?
Specifications and external appearance are subject to change without notice.
Printed in China
811-101391W010
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|