IDE 3-in-1 (5.25”, 3.5”, 2.5”)
to USB 2.0 Cable Converter Adapter
RCW607
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607
User Manual
drive will automatically mount itself. That being said, this is not true for all Operating Systems and
a good knowledge of how your OS works is needed. In some systems a drive utility is needed
to format or partition the mechanism and or mount the drive. New Mechanisms all need to go
through the format and partition routine in order to be used. Also note that drives from different
computers, i.e. (Macintosh to/from Windows) will not be recognized unless a third party utility is
used. Without such a utility the OS may think that the drive has no data on it and ask to be re-
formatted. This of course would destroy all the data on it.
Connecting IDE 3.5” Hard Drives
3.5” IDE Mechanisms
The 3.5” IDE drive has two connectors on the rear. The larger, 40 pin connector is IDE DATA while
the smaller, 4 pin connector is for Drive Power. Plug in the DrivePower connector. This connector
has cut corners and must be installed with the correct orientation. Make sure the power switches
are in the off position and that the LED’s in the switch box are not illuminated.
Next plug in the larger IDE Data connector located on the Cable Adapter. This 40 pin connector is
keyed and can only be inserted in one direction. Plug the USB Connector into the computer and
turn the power switch on.
Connecting IDE 5.25” CD/DVD
5.25” IDE CD/DVD Mechanisms
The 5.25” IDE CD/DVD drive has two connectors on the rear. The larger, 40 pin connector is IDE
DATA while the smaller, 4 pin connector is for Drive Power. Plug in the DrivePower connector.
This connector has cut corners and must be installed with the correct orientation. Make sure the
power switches are in the off position and that the LED’s in the switch box are not illuminated.
Next plug in the larger IDE Data connector located on the Cable Adapter. This 40 pin connector is
keyed and can only be inserted in one direction. Plug the USB Connector into the computer and
turn the power switch on.
Connecting IDE 2.5” Hard Drives
2.5” IDE Mechanisms
The 2.5” IDE Drive has one connector on the rear. The 44 pin connector is IDE DATA and IDE
Power combined. This connector has a blocked socket and must be installed in the correct
orientation. Match the blocked socket with the missing pin on the drive mechanism.
2.5” IDE Drive mechanisms get their power from the USB port. In this case, the Universal Power
Supply is not needed.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607
User Manual
Using the Power Supply
The IDE Drive Power connector plugs into any standard IDE, ATAPI, ATA, or SCSI type of drive
mechanism. Power should only be supplied to the Drive Mechanism after the Data Cable has
been connected to the Cable Adapter.
Formatting & Partitioning Drives
Formatting & Partitioning
After the Cable Adapter and drivers have been plugged in the next step is to format and partition
your drive mechanism. This procedure is different with every operating system. In Macintosh, it is
called “Disk Utility”. On a PC running windows it is called “Disk Management”.
No matter which operating system you are running the basics are still the same. The drives will
need to be formatted and partitioned before they can be used.
After your finish this initialization process the drives will then be ready to use. Again, every system
is slightly different especially when it comes to RAID and RAID levels. Read the documentation
carefully before putting important data on your system.
Most operating systems include the necessary USB drivers that support hard drives, CD, DVD,
and Floppy Drives. These drivers must be installed for the Cable Adapter to work properly. If they
are not installed use the original installation disks to install the needed USB drivers. If you are
using USB ꢀ.ꢀ expect slow performance because of the limited speed of this bus.
Specifications
USB 2.0 to IDE Cable
• Connect any device with an IDE Interface to a PC with USB interface
• Transfer rate Approx. 480 MBps
• Complies with USB 2.0 standards
• Backwards compatible to USB ꢀ.ꢀ standards
• Complies with ATA/ATAPI-66 Spe. Vꢀ.0
• Easy to Install
• Supports IDE and enhanced IDE hard drives
• Supports ATA/ATAPI CD-ROM/R/RW DVD-ROM and more
• External power adapter for IDE/ATAPI devices
• Linux compatible
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607
User Manual
Package Contents
RCW-607 X ꢀ
User manual X ꢀ
Power cord X ꢀ
Power adapter X ꢀ
Driver disc X ꢀ
Silicon protection case for 2.5” hard drive X ꢀ
Silicon protection case for 3.5” hard drive X ꢀ
Installation
ꢀ. Plug the 2.5” or 3.5” ATA/ ATAPI device to RCW-607 by IDE interface.
(Please notice the direction of IDE port) Please check a to d as below.
3.5"
5.25"
2.5"
SATA function is only available in RCW608, RCW607 does not have SATA connecting port.
a. 3.5" ATA hard drive
b. 2.5" ATA hard drive
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607
User Manual
c. 5.25" ATAPI device
ATAPI device
2. Connect the power adapter set.
3. Plug the power adapter to your ATA/ATAPI device. Please check a to d as below.
a. 3.5" ATA
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607
User Manual
b. 2.5" ATA
There is no additional power needed for 2.5” hard drive.
c. 5.25" ATAPI
4. Plug the power adapter to power source and turn on the power
(Please make sure the voltage is between ꢀ00~240V)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607
User Manual
5. Plug the USB2.0 cable to PC and wait for PC auto-detection. Driver is needed only in old
system such as Windows 98. Please inset the driver disk when your system can’t complete
the installation process. Windows will auto-install after it detects the driver disk and choose
the most suitable driver for your system. (Please notice the direction of USB port)
Notification
ꢀ. Please take off your ATA / ATAPI device from RCW-607 only after you turn off the
power to avoid any damage.
2. If you plug RCW-607 and hard drive to PC, PC might freeze during the beginning of booting.
In this case, you may unplug RCW-607 at the start of booting and re-plug it after PC enters
windows.
3. If PC can’t detect RCW-607 and hard drive in your OS, please try the following steps.
ꢀ. Unplug RCW-607 and try to reboot the PC.
2. Re-plug it after system enters the OS.
3. If all above still can’t help, it might be caused by the incompatibility between hard drive,
system and controller chipset. Please contact us for furthur support.
Trouble shooting
i. Q: I completed the installation by following the menu but MS Windows can’t detect any
hard drive.
A: The reason of the problems could be:
ꢀ. Hard drive has not completed the format or F-disk process.
* Solution: Format or F-disk your hard drive.
2. The hard drive failed.
* Solution: Replace a workable hard drive.
3. Bad USB connection.
*Solution: Unplug the USB connection and re-connect the USB again.
4. Check LED light on the adapter. If the red LED light on RCW-607 is not on after
connected with PC, this adapter is not working correctly.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607
*Solution: Please contact our RMA department for replacement.
User Manual
ii. Q: After I installed RCW-607 to the hard drive, my hard drive will not run.
A: Four pin power connector is directional. If you plug in the four pin power connector in
reverse, your hard drive might be damaged.
*Solution: Please make sure the direction of 4 pin power connector is correct before you
plug it to your hard drive. The shape of the male 4 pin connector must fit the female
connector of your hard drive as pictures shown below.
iii. Q: Fail or slow system boot up when RCW-607 was connected with PC.
A: This issue is caused by the hardware confliction of the system scanning during boot up.
*Solution:Please disconnect RCW-607 from your PC before system boot up.
Connect it to PC after the Windows complete boot up.
Thank you for purchasing a quality Rosewill Product.
for complete warranty information and future support for your product.
If you have any question while using our products, please feel free to contact us at [email protected].
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|