RCA Camcorder CC6394 User Guide

Camcorder  
User’s Guide  
Changing Entertainment. Again.  
CC6384/CC6394  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Table of Contents  
Chapter 1: Connections & Setup  
Parts Checklist ......................................................................................... 6  
Buttons and Controls ............................................................................. 7  
Getting Started ....................................................................................... 9  
Unpack the camcorder and accessories .......................................... 9  
Adjust the hand strap .................................................................... 10  
Attach the lens cap ........................................................................ 10  
Attach the power supply ............................................................... 11  
Turn on the camcorder................................................................... 12  
Set the video light (Off/AUTO/ON) switch to AUTO .................... 12  
Insert a cassette tape ..................................................................... 13  
Use the LCD monitor or viewfinder to see whats recording ...... 14  
Start recording ............................................................................... 15  
Play your recording ........................................................................ 15  
Turn off the camcorder .................................................................. 16  
Powering the Camcorder ..................................................................... 16  
Charging the Battery ..................................................................... 16  
Refreshing the Battery ................................................................... 18  
Battery Level Icon ........................................................................... 19  
Battery Care and Storage .............................................................. 19  
Using the Power Supply ................................................................. 20  
Using the Shoulder Strap ..................................................................... 21  
Setting the Date and Time ................................................................... 22  
Setting the Recording Format (for CC6394 only) ............................... 23  
Additional Notes about S-VHS and S-VHS ET Cassette Tapes ...... 24  
Setting the Tape  
Recording Speed ................................................................................... 25  
Setting the Tape Length ....................................................................... 26  
Chapter 2: Using the Monitors  
Seeing What You Are Recording ......................................................... 28  
Using the LCD Monitor .................................................................. 28  
Using the Viewfinder ..................................................................... 29  
On-screen Icons..................................................................................... 30  
Warning Icons ................................................................................. 30  
(continued on the next page)  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Recording and Playback Icons ....................................................... 31  
Other Icons ..................................................................................... 35  
Chapter 3: Recording  
Recording Details.................................................................................. 38  
Journalistic Shooting...................................................................... 38  
Self-Recording ................................................................................ 39  
Quick Review .................................................................................. 39  
Retake ............................................................................................. 39  
Digital and Optical Zooming ......................................................... 40  
Using Steady Pix.......................................................................... 41  
Using the Video Light .................................................................... 42  
Recording Tips ...................................................................................... 44  
Chapter 4: Playback  
Playback Options .................................................................................. 46  
Basic Playback ................................................................................. 46  
Still Playback Mode ........................................................................ 49  
Shuttle Search................................................................................. 50  
Choose your Connection ...................................................................... 51  
Using the Cassette Tape Adapter .................................................. 51  
Connecting to a TV (or VCR) with Audio/Video Input Jacks ........ 54  
Playback on a TV (or VCR) with Audio/Video Input Jacks............ 55  
Tape Dubbing ................................................................................. 56  
Chapter 5: Digital Still Camera  
Digital Still Camera Recording and Playback...................................... 58  
Setting the Picture Quality ............................................................ 59  
Selecting a Snapshot Mode ........................................................... 60  
Taking Snapshots............................................................................ 62  
Normal Playback............................................................................. 64  
Slide Show ...................................................................................... 65  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Index ............................................................................................... 65  
Index Playback ................................................................................ 66  
Protecting Images .......................................................................... 67  
Unprotecting Images ..................................................................... 68  
Deleting Images ............................................................................. 69  
Initializing the Built-in Memory .................................................... 70  
System Requirements for Picture Navigator ...................................... 72  
Connecting To A Windows® PC .......................................................... 73  
Chapter 6: Advanced Features  
Using the Menus For Advanced Adjustment...................................... 76  
Menu Definitions .................................................................................. 77  
Camera Menu ................................................................................. 77  
System Menu .................................................................................. 77  
System Menu (continued) .............................................................. 78  
Using the Advanced Features .............................................................. 80  
Fade/Wipe Effects ........................................................................... 80  
Program AE With Special Effects................................................... 82  
Digital Effects ................................................................................. 83  
Exposure Control ............................................................................ 84  
Focusing .......................................................................................... 85  
White Balance Adjustment ............................................................ 87  
Date/Time Insert ............................................................................. 89  
Instant Titles ................................................................................... 90  
Animation ....................................................................................... 91  
Time-Lapse ...................................................................................... 92  
Chapter 7: Other Information  
Troubleshooting.................................................................................... 94  
Final Notes ............................................................................................ 99  
Care and Cleaning .............................................................................. 102  
Care and Maintenance ....................................................................... 102  
Proper Care and Storage ............................................................. 103  
Tape Care and Storage................................................................. 104  
CD-ROM Care................................................................................ 104  
(continued on the next page)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Things to Avoid ............................................................................ 105  
Traveling Tips ...................................................................................... 106  
Specifications ...................................................................................... 107  
Customer Assistance and Service ...................................................... 109  
Limited Warranty................................................................................ 111  
FCC Declaration of Conformity and Industry Canada Information. 115  
Optional Accessories .......................................................................... 116  
Accessories Order Form................................................................ 119  
Index .................................................................................................... 122  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
Connections & Setup  
Chapter Overview:  
Parts Checklist  
Buttons and Controls  
Getting Started  
Powering the Camcorder  
Using the Shoulder Strap  
Setting the Date and Time  
Setting the Recording Format  
Setting the Tape Recording Speed  
Setting the Tape Length  
Changing Entertainment. Again.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Parts Checklist  
Make sure the box includes the items shown here:  
E
T
C
E
J
E
R
F
E
D
R
I
V
H
S
O
E
C S  
D
H
C
G R  
A
C
E
F
I
G
I
D
E
E
T
R
A
.
P
F
K
A
T
E
D
A
F
E
E
P I  
W
/
E
MEN  
U/B  
R
C
RIG  
G
R
R
E T N U O  
/TRA  
CKIN  
HT  
M /  
O
F  
O
T
U
A
P
O
T
N O  
SNA  
S
L
PSH  
H G  
I
OT  
T
VO  
L
+
ST  
EA  
DY  
PI  
X/  
TB  
C
+
I  
C  
I
/
T  
Camcorder  
AC power supply  
Part # 250814  
Battery pack  
Part # 244427 (FB1260)  
(CC6394 only)  
Part # 244265 (CC6384 only)  
Shoulder strap  
Part # ACS091  
AA battery for  
cassette tape  
adapter  
Cassette tape adapter  
Part # 244270  
Lens cap  
Part # 251624  
PC connection cable (for Windows® PC)  
Part # 247952  
Imaging software  
CD-ROM  
Part # 247954  
Caution  
Never use the power supply for any purpose other than charging the FB1260 battery  
pack or for supplying power to the camcorder.  
6
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Buttons and Controls  
MENU/  
SNAPSHOT  
button  
Power Zoom/ VOL lever  
Viewfinder  
BRIGHT/  
TRACKING  
dial  
C
O
U
L
N
IG  
T
H
T
F
E
A
R
O
D
F
F
E
R
A
U
/
M
W
P
.
T
O
I
P
A
O
E
E
N
D
I
G
I
F
E
C
T
S
O
T
P
R
R
E
T
A
K
E
F
L
O
V
T
O
H
S
P
A
N
S
T
H
IG  
R
R
/T  
/B  
G
I
N
U
N
E
K
C
M
A
+
C
/TB  
IX  
Y
P
D
TEA  
S
+
L
STEADY PIX™  
A
IT  
IG  
)
T
D
D
U
/O  
IN  
C
S
(
button  
M
A
A
F
O
Y
L P  
S-video jack  
Audio/Video  
jacks  
Power  
switch  
BATTERY  
RELEASE  
switch  
Recording  
Start/Stop  
button  
E
C
E
J
T
R
E
D
O
R
F
V
S
E
I
H
E
D
S
C
C
H
A
D
R
G I  
G
I
E
T C E F  
P
E A .  
F
D A  
F
E
W
/
E
K
E P I  
A
T E  
R
M
EN  
U/  
BR  
E T N U O C  
IG  
R
R
R
/T  
HT  
M
/
RA  
O
CK  
F F  
IN  
A
U
G
O
T
O
N
P
O
T
S
SN  
AP  
L
SH  
G
I
H
OT  
T
V
O
L
Eyepiece focus  
control  
+
S
T
E
A
D
Y
P
IX  
/T  
B
C
+
DIGITAL (DSC  
IN/OUT) jack  
Speaker  
Video light  
Microphone  
Hand strap  
Chapter 1  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Playback  
buttons  
DSC/CHARGE  
indicator  
VIDEO/REFRESH  
indicator  
STOP  
R
RETAKE  
F
Video  
LIGHT  
switch  
EJECT  
switch  
COUNTER R/M and  
FADE/WIDE button  
DIGIFECT  
button  
P.AE  
button  
REFRESH button  
S
T
O
P
R
R
E
T
A
K
E
F
Shoulder  
strap  
eyelets  
Area marked CLOSE  
LCD monitor  
Tripod mounting sockets  
Camcorder bottom view  
8
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Getting Started  
This section describes the basics on how to set up your camcorder to record for the first  
time. Refer to the other sections for detailed operation and feature options.  
Unpack the camcorder and accessories  
• The items shown are packed with the camcorder. If any pieces are missing or  
appear damaged, contact your dealer immediately.  
• Remove the plastic film that covers the front and side logos on the camcorder. Use  
your fingernail, not anything sharp, to remove.  
• Save all packing materials and box in case the camcorder ever needs to be  
shipped or stored.  
Chapter 1  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Adjust the hand strap  
1. Lift the flap on the hand strap and separate the Velcro strip.  
2. Insert your hand so your fingers can comfortably reach the buttons.  
3. Adjust the strap to fit snugly.  
4. Refasten the strap, and fold the flap back down.  
C
O
U
N
L
IG  
T
E
H
T
F
O
A
R
FF  
D
E
R
A
U
W
M
T
O
P
I
.
P
A
E
O
N
E
D
G
F
E
C
T
S
P
O
T
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
HT  
IG  
BR  
U/  
EN  
NG  
M
KI  
AC  
R
/T  
+
C
B
/T  
IX  
P
Y
D
A
E
T
S
+
L
A
IN  
IT  
IG  
)
T
D
S
U
/O  
C
(D  
M
A
F
O
Y
A
L P  
Attach the lens cap  
To protect the lens, attach the provided lens cap to the camcorder as shown in the  
illustration.  
C
O
U
N
L
IG  
T
E
H
T
F
O
A
R
FF  
D
E
R
A
U
W
M
T
O
P
.
P
A
E
O
N
E
D
G
F
E
C
T
P O T S  
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
HT  
IG  
BR  
U/  
EN  
NG  
M
KI  
AC  
R
/T  
+
C
B
/T  
IX  
P
Y
D
A
E
T
S
+
L
A
IN  
IT  
IG  
)
T
D
S
U
/O  
C
(D  
M
A
O
Y
A
L P  
10  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
C
O
U
N
L
IG  
T
E
H
T
F
O
A
R
FF  
D
E
R
A
U
W
M
T
O
P
.
P
A
E
O
N
E
D
G
F
E
C
T
P O T S  
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
HT  
IG  
AC  
BR  
/T  
U/  
NG  
KI  
EN  
M
R
+
C
B
/T  
IX  
P
Y
D
A
E
T
S
+
L
A
IT  
IG  
)
T
D
S
U
/O  
IN  
C
(D  
M
A
F
Y
2
A
L P  
AC power supply  
1
DC IN jack  
Attach the power supply  
Since the battery must be charged before it can be used the first time, you need to use an  
AC outlet to power the camcorder.  
1. Plug the small end of the power supply into the DC IN jack on the camcorder.  
2. Plug the other end of the power supply into a working AC outlet.  
Chapter 1  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Turn on the camcorder  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
Set the Power switch to the desired setting, either  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
A
M
AL  
IT  
IG  
automatic ( ) or manual ( ) record mode, powered  
D
T)  
U
/O  
IN  
SC  
(D  
off (OFF), or in playback mode ( ).  
M
A
Y
P
The VIDEO indicator comes on when the camcorder  
is turned on.  
A
Automatic recording places the camcorder  
into AutoShot™ mode. Focus, exposure, iris  
control, white balance, and the video light are  
controlled by the camcorder during automatic  
recording.  
M
A
F
Y A  
L
P
M
Manual recording mode allows you to  
Power switch  
control many of the camcorder’s special  
features, including accessing the menus and  
setting the clock.  
Notes:  
Many special effects don’t operate in  
AutoShot mode (see pages 77-79 for  
more information).  
The camcorder automatically turns off to  
save battery power if you leave it in  
record-standby mode for more than five  
minutes. To turn it back on, set the  
Power switch to OFF, then back to  
automatic or manual record mode.  
VIDEO indicator  
Set the video light (OFF/AUTO/ON)  
Switch to AUTO  
STOP  
R
RETAKE  
F
Slide the video LIGHT switch to AUTO. In this  
setting, the video light automatically turns on when  
more light is needed.  
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
Video LIGHT  
switch  
12  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Insert a cassette tape  
1. Make sure the camcorder is connected to a  
power supply.  
2. Open the LCD monitor fully or adjust the  
viewfinder.  
A
3. With the camcorder set to (automatic  
STOP  
R
RETAKE  
F
record), slide the EJECT switch until the  
cassette tape holder opens. Don’t force the  
camcorder open.  
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
4. Insert a tape with the tape wheel facing up and  
the tape window facing out.  
Notes:  
EJECT switch  
Make sure the tape is not slack when  
loading the cassette tape. If there is any  
slack, turn the wheel on the cassette  
tape in the direction of the arrow to  
take up the slack.  
Make sure the Erase Protection tab is in  
the position that allows recording. If  
not, slide the tab. Some tapes have  
removable tabs. If the tab has been  
removed, cover the hole with adhesive  
tape.  
Tape window  
Tape wheel 5. Push on the area marked CLOSE until the  
cassette tape holder locks into place. (PAUSE  
appears on the LCD or in the viewfinder.)  
Notes:  
ST  
OP  
R
RE  
T
A
KE  
F
You can’t open the cassette tape holder  
unless a power supply is attached.  
The cassette tape holder can’t be  
opened while the camcorder is in the  
record mode.  
Area marked  
CLOSE  
Caution: Closing the LCD monitor while the  
cassette tape holder is still open may  
damage the LCD monitor.  
BATTERY  
RELEASE switch  
Cassette tape holder  
Chapter 1  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
MENU dial  
Use the LCD monitor or viewfinder  
to see whats recording  
ST  
OP  
R
RE  
T
A
KE  
F
Using the LCD monitor  
1. Remove the lens cap.  
2. Open the monitor 90˚ from the camcorder body.  
3. Tilt the monitor 180˚ forward or 90˚ down as  
required for convenient viewing while  
recording.  
LCD monitor  
4. To adjust the brightness of the LCD monitor,  
rotate the MENU dial.  
Notes:  
Adjusting the LCD monitor brightness  
does not affect the recorded image on  
the tape.  
When the LCD monitor opens more than  
25˚, the viewfinder automatically turns  
off. When the LCD monitor is closed, the  
viewfinder automatically turns on.  
Viewfinder  
Eyepiece focus  
control  
Using the viewfinder  
1. Remove the lens cap.  
2. Close the monitor.  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
F
AU  
TO  
E
/
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
T O S  
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
Note: If the monitor is open more than 25˚,  
the viewfinder turns off.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
3. Adjust the viewfinder to a comfortable position.  
M
A
A
F
O
Y
L P  
4. Turn the eyepiece focus control to adjust the  
focus of the viewfinder for your vision.  
14  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Start recording  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
1. Remove the lens cap.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
A
2. Set the Power switch to (automatic record).  
M
A
A
F
O
Y
L P  
(The VIDEO indicator comes on.)  
3. Press and release the Recording Start/Stop  
button to start recording. (REC appears in the  
viewfinder or LCD monitor (but won’t show up  
in the recording)).  
M
A
F
4. When finished recording, press and release the  
Recording Start/Stop button again to stop  
recording. The camcorder is now in the record-  
pause mode. (PAUSE appears in the viewfinder  
or on the LCD monitor.)  
Y A  
L
P
Power switch  
Recording  
Start/Stop  
button  
Play your recording  
STOP  
R
RETAKE  
F
1. Set the Power switch to  
indicator comes on.)  
. (The VIDEO  
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
O
D
G
I
D
A
.
C
F
P
2. Press the Rewind button  
to reverse the tape  
to the beginning. When rewound completely,  
the camcorder automatically stops.  
Playback buttons on top of  
the camcorder include:  
3. Press the Play/Pause button  
to start  
/
playback. View the recording using the LCD  
monitor or viewfinder.  
Stop ( ),  
Rewind (  
)
Play/Pause (  
Fast Forward ( ).  
)
/
4. Press the Stop button when finished playing  
the tape.  
Notes:  
Sound will play back if the LCD monitor  
is open or closed. To adjust the volume,  
use the Zoom Lever (also labeled  
VOL - +).  
More information about using the LCD  
monitor and viewfinder can be found on  
pages 28-29.  
Chapter 1  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Turn off the camcorder  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
1. Set the Power switch to OFF.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
2. Close the LCD monitor.  
M
A
Y
P
Powering the Camcorder  
You can power your camcorder with a battery or AC  
power.  
DC IN  
jack  
M
A
F
Y A  
L
P
Charging the Battery  
Power switch  
1. Set the Power switch to OFF.  
2. Make sure the battery is attached to the  
camcorder. Hook the top end of the battery to  
the camcorder and push the battery in until it  
locks in place.  
CHARGE indicator  
Important: If the battery pack is attached in  
the wrong position, a malfunction may occur.  
STOP  
R
RETAKE  
F
M
/
R
3. Plug the small end of the power supply into the  
DC IN jack on the camcorder and the other end  
into an AC outlet. (The CHARGE indicator  
blinks.)  
E
P
R
E
T
I
W
C
T
E
F
/
N
U
E
D
E
A
I
G
O
I
D
A
.
C
F
P
4. When the CHARGE indicator stops blinking but  
stays on, charging is finished. Make sure the  
Power switch is set to OFF, then unplug the  
power supply from the AC outlet and from the  
camcorder.  
Tip  
Important: Before detaching the power  
source, make sure the camcorder’s power is  
turned off. Failure to do so can result in a  
camcorder malfunction.  
Before extended use, it is  
recommended that you prepare  
enough battery packs to cover 3  
times the planned shooting time.  
16  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Notes:  
If a protective cap is on the battery, remove it before use or charging.  
When charging a battery for the first time or after a long storage period, the  
CHARGE indicator may not come on. Remove the battery and try again.  
Charge the battery in temperatures between 50˚ and 90˚ Fahrenheit (10-35˚  
Celsius).  
Charging times are based on a fully discharged battery and vary depending on  
ambient temperature and battery condition.  
Approximate charging time  
Battery  
Charging Time  
244265 (for CC6384)  
FB1260 (for CC6394)  
approx. 2 hrs. 20 min.  
approx. 90 min.  
Approximate recording time (in minutes)  
Battery  
Viewfinder on  
130, (75*)  
LCD monitor on  
105, (60*)  
244265 (for CC6384)  
FB1260 (for CC6394)  
* when the video light is on  
80, (45*)  
65, (35*)  
Note: Recording time is reduced significantly when you use the Zoom or Record-  
Standby modes repeatedly or when you use the LCD monitor repeatedly.  
Charge marker  
Using the Charge Marker  
A charge marker is provided on the battery pack to  
help you remember whether it has been charged or  
not. Two colors are provided (red and black)—you  
choose which one means charged and which means  
discharged.  
Chapter 1  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Removing the Battery  
C
O
U
N
L
IG  
T
E
H
T
F
O
A
R
FF  
D
E
R
A
U
W
M
T
O
P
.
P
A
E
O
N
E
D
G
F
E
C
T
O
T
S
P
R
Slide the BATTERY RELEASE switch and pull out the  
battery pack.  
R
E
K A T E  
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RA  
RI  
/T  
/B  
G
KIN  
NU  
C
+
C
B
/T  
IX  
P
Y
D
TA  
E
S
+
L
A
IT  
IG  
D
S
)
T
U
/O  
IN  
C
(D  
M
F
O
Y
Refreshing the Battery  
If you charge a battery before it has been fully  
discharged, the battery’s capacity may be reduced  
over time. We recommend you discharge or “refresh”  
your battery before recharging it.  
BATTERY  
RELEASE switch  
1. Follow steps 1-3 in “Charging the Battery” (see  
page 16).  
2. Press and hold the REFRESH button for 2  
seconds. (The REFRESH indicator blinks. When  
the battery has been refreshed, charging  
automatically starts and the CHARGE indicator  
blinks.)  
Notes:  
CHARGE  
indicator  
REFRESH  
indicator  
If you store a partially charged battery  
for a long period of time, its  
performance is reduced.  
STOP  
R
RETAKE  
F
During charging or discharging, the  
camcorder can’t be operated.  
M
/
R
E
P
R
E
T
I
W
C
T
N
U
O
E
F
/
E
D
E
A
I
G
I
D
A
.
C
F
P
Charging and discharging isn’t possible if  
the wrong type of battery is used.  
If the battery operation time remains  
extremely short even after having been  
fully charged, the battery is worn out  
and needs to be replaced. Please  
purchase a new one.  
REFRESH button  
18  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Battery Level Icon  
The battery level icon appears in the viewfinder or  
LCD monitor and reveals the amount of power left in  
the rechargeable battery.  
Note: The battery level icon is not recorded on  
the tape.  
This icon appears when battery is fully charged.  
The icon changes to show that you’ve used some of the battery’s power.  
As you use more of the battery’s power, the icon changes again.  
This battery icon flashes in the viewfinder or LCD monitor when the battery  
power is almost gone. The camcorder turns off automatically after a few  
seconds.  
Battery Care and Storage  
After repeated charging and use, battery life gradually decreases. When operation  
time is too short to be useful, the battery should be replaced.  
If the battery pack becomes too hot, remove it from the camcorder and let it cool  
down.  
Do not short the battery’s terminals.  
Do not attempt to disassemble or modify the battery. There are no user-serviceable  
parts inside.  
Use the battery only with specified adapter/chargers and camcorders.  
Throwing the battery into a fire or exposing it to excessive heat – over 149˚F (65˚C)  
could be hazardous.  
ATTENTION: The EPA certified RBRC® Battery Recycling Seal on the nickel-  
cadmium (Ni-Cd) battery indicates Thomson Consumer Electronics is  
voluntarily participating in an industry program to collect and recycle these  
R
B
batteries at the end of their useful life, when taken out of service in the  
R
C
United States or Canada. The RBRC® program provides a convenient  
alternative to placing used Ni-Cd batteries into the trash or the  
municipal waste stream, which may be illegal in your area. Please call  
Ni-Cd  
1-800-8-BATTERYfor information on Ni-Cd battery recycling and  
disposal bans/restrictions in your area. Thomson Consumer Electronics’  
involvement in this program is part of our commitment to preserving our  
environment and conserving our natural resources.  
Chapter 1  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Using the Power Supply  
The power supply attaches to the camcorder and lets you power it directly from standard  
household power. The power supply operates on 110-240 volts, 50/60 Hz, so it can be  
used virtually anywhere in the world to power the camcorder or recharge the battery.  
1. Plug the small end of the power supply into the DC IN jack on the camcorder.  
2. Plug the other end of the power supply into a working AC outlet (110-240V, 50/  
60Hz).  
Caution: Never use this power supply for any purpose other than charging the  
FB1260 or supplying power to the camcorder.  
DC IN jack  
C
O
U
N
L
IG  
T
E
H
T
F
O
A
R
FF  
D
E
R
A
U
W
M
T
O
P
.
P
A
E
O
N
E
D
G
F
E
C
T
P O T S  
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
HT  
IG  
AC  
BR  
/T  
U/  
NG  
KI  
EN  
M
R
+
C
B
/T  
IX  
P
Y
D
2
E
A
T
S
+
L
A
IT  
IG  
)
T
D
S
U
/O  
IN  
C
(D  
M
A
F
O
Y
A
L P  
AC power supply  
1
Removing the power supply  
1. Make sure the Power switch is set to OFF.  
2. Unplug the power supply from the AC outlet.  
3. Unplug the small end of the power supply from the DC IN jack on the camcorder.  
Important: Before detaching the power source, make sure the camcorders power is  
turned off. Failure to do so can result in a camcorder malfunction.  
Using an Optional Plug Adapter in Foreign Countries  
An optional plug adapter might be required in some countries.  
1. Plug the power supply’s plug into the AC plug adapter.  
2. Plug the AC plug adapter into the AC outlet.  
20  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Using the Shoulder Strap  
The camcorder’s shoulder strap is designed to let you carry the camera from your  
shoulder and – when ready– bring the camcorder to shooting position in one quick  
movement.  
1. Following the illustration, thread the strap through the eyelet.  
2. Fold the strap back and thread it through the buckle.  
3. Repeat the procedure to attach the other end of the strap to the other eyelet located  
under the hand strap. Make sure the strap is not twisted.  
Caution: When carrying the camcorder with the shoulder strap, you should close the  
LCD monitor and rotate the viewfinder down. This helps prevent possible damage to  
the monitor or viewfinder from bumping against your body as you move. Make sure  
the shoulder strap is firmly attached before using it to carry the camcorder.  
1
2
S
T
O
P
R
R
E
T
A
K
E
F
3
Chapter 1  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
C
O
U
N
LI  
GH  
T
Setting the Date and Time  
T
E
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
P
O
T
S
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
BC  
/T  
You need to set the date and time before they can  
be displayed.  
X
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
Date and time information is recorded onto the tape  
at all times, but its display can be turned on or off  
during playback (see page 89).  
MENU dial  
M
1. Set the Power switch to (manual record).  
(The VIDEO indicator comes on.)  
M
A
F
2. Press in the MENU dial. (The CAMERA MENU  
Y A  
L
P
appears.)  
Power switch  
3. Rotate the MENU dial to highlight TO SYSTEM  
MENU. Press in the MENU dial to select it. (The  
SYSTEM MENU appears.)  
CAMERA MENU  
TO SYSTEM MENU  
FOCUS  
AUTO  
EXPOSURE  
M. W. B.  
AUTO  
AUTO  
SYSTEM MENU  
4. Rotate the MENU dial to highlight NEXT. Press  
in the MENU dial to select it. (The second page  
of the SYSTEM MENU appears.)  
NEXT  
REC MODE  
D. ZOOM  
SP  
50  
x
5. Rotate the MENU dial to highlight DATE/TIME.  
Press in the MENU dial to select it. (The DATE/  
TIME menu appears.)  
SYSTEM MENU  
TO CAMERA MENU  
REC T I ME  
OFF  
I NT . T I ME  
TELE MACRO  
T I TLE LANG.  
DATE / T I ME  
DEMO MODE  
OFF  
OFF  
ENGL I SH  
6. Rotate the MENU dial to the item you want to  
change (year, month, day, and time). Press in  
the MENU dial to select it. When the setting  
starts blinking, rotate the MENU dial to adjust it.  
When the correct setting appears, press in the  
MENU dial to select it.  
OFF  
RETURN  
DATE / T I ME  
YEAR  
MONTH  
DAY  
2001  
JUN  
28  
7. When finished, rotate the MENU dial to select  
:
T I ME  
PM  
8
20  
EXIT. Then press in the MENU dial twice.  
Note: To make the date and time appear in  
the camcorders display or on the TV, see  
page 89.  
EX I T  
Important: A separate internal battery is  
used for the time and date. Under normal  
conditions, this battery should last for 10  
years or more. If you should need to replace  
it, see your nearest RCA authorized service  
center.  
22  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Setting the Recording Format (for CC6394 only)  
You need to select what kind of tape you are using or type of recording you wish to  
perform.  
M
1. Set the Power switch to  
(manual record). (The  
VIDEO indicator comes on.)  
2. Press the MENU dial in. (The CAMERA MENU  
appears.)  
3. Rotate the MENU dial to highlight TO SYSTEM  
MENU. Press in the MENU dial to select it. (The  
SYSTEM MENU appears.)  
SYSTEM MENU  
4. Rotate the MENU dial to highlight S-VHS ET. Press  
the MENU dial to select it. (The S-VHS ET menu  
appears.)  
NEXT  
REC MODE  
D. ZOOM  
16 x 9  
S - VHS ET  
TAPE LENGTH  
D I SPLAY  
P I CTURE  
SNAPSHOT  
SP  
50  
x
OFF  
ON  
T
30  
If you are using a standard VHS-C tape, rotate the  
MENU dial to S-VHS ET. Press in the MENU dial  
to select it.  
FULL  
F I NE  
FULL  
RETURN  
If you are using an S-VHS tape, rotate the MENU  
dial to S-VHS. Press in the MENU dial to select it.  
S
VHS ET  
ON  
OFF  
5. Rotate the MENU dial to ON if you want to record  
in S-VHS mode, or OFF if you want to record in  
standard VHS mode. Press the MENU dial to  
select it.  
EX I T  
ON  
Records with S-VHS picture quality  
on a VHS-C tape. This is called  
Super VHS ET (Expansion  
Technology). Also records in S-VHS  
when you are using an S-VHS tape.  
OFF  
Factory preset: records in VHS.  
Notes:  
When the S-VHS ET mode is engaged, S-ET  
is displayed.  
During S-VHS record mode, S is displayed.  
When S-VHS ET or S-VHS recording starts,  
S-VHS REC is displayed for approximately.  
3 seconds.  
If a tape is not loaded, S-VHS is displayed.  
Chapter 1  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Additional Notes about S-VHS and S-VHS ET Cassette Tapes  
Use S-VHS tapes for storing recordings for an extended period or for recording  
important scenes, as they enable higher-quality recording and playback.  
With some tapes, better picture quality may not be obtained even with S-VHS  
ET recording. It is recommended that you do a test recording beforehand to  
ensure if better results can be obtained.  
If the S-VHS ET mode or recording format is switched during recording, the  
playback picture will be blurred at the switching point.  
Noise may appear on-screen when tapes recorded in the SLP mode are played  
back.  
Tapes recorded in S-VHS or S-VHS ET mode can be played back not only on this  
camcorder but also on a Super VHS VCR, an S-VHS ET VCR, or a VCR equipped  
with the SQPB (S-VHS QUASI PLAYBACK) function.  
When tapes recorded in S-VHS or S-VHS ET mode are played back on a VCR  
equipped with the SQPB (S-VHS QUASI PLAYBACK) function, S-VHS picture  
quality is not available.  
Tapes recorded in S-VHS or S-VHS ET mode may not play back on some VCRs.  
It is recommended to specifically label S-VHS ET recordings so you can easily  
distinguish them from regular VHS recordings.  
To avoid on-screen noise, do not perform Still Playback or Shuttle Search  
repeatedly.  
The S-VHS ET (extended technology) feature does not work with S-VHS tapes.  
24  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
C
O
U
N
LI  
T
E
GH  
T
A
D
F
R
OF  
Setting the Tape  
Recording Speed  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
AC  
RI  
/B  
NU  
ME  
G
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
You need to select the tape recording speed for the  
quality of recording you want.  
M
A
A
F
O
Y
L P  
M
1. Set the Power switch to  
(manual record).  
(The VIDEO indicator comes on.)  
MENU dial  
2. Press the MENU dial in. (The CAMERA MENU  
M
appears.)  
A
F
Y A  
L
P
3. Rotate the MENU dial to highlight TO SYSTEM  
MENU. Press in the MENU dial to select it. (The  
SYSTEM MENU appears.)  
Power switch  
4. Rotate the MENU dial to highlight REC MODE.  
Press in the MENU dial to select it. (The REC  
MODE menu appears.)  
VIDEO indicator  
5. Rotate the MENU dial to highlight SP if you want  
the best recording quality, or SLP if you want a  
lesser-quality recording which provides three  
times the recording time as SP. Press in the  
MENU dial to select it.  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
6. When finished, press in the MENU dial again to  
exit.  
Note: If the recording speed is switched  
during the recording, the playback picture  
will be blurred at the switching point.  
Chapter 1  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
C
O
Setting the Tape Length  
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
P
O
T
S
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
You need to select the tape length so that the camera  
can alert you how much time you have left on the  
tape.  
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
Y
P
M
1. Set the Power switch to  
(manual record). (The  
VIDEO indicator comes on.)  
MENU dial  
2. Press the MENU dial in. (The CAMERA MENU  
appears.)  
M
A
F
3. Rotate the MENU dial to highlight TO SYSTEM  
MENU. Press in the MENU dial to select it. (The  
SYSTEM MENU appears.)  
Y A  
L
P
Power switch  
4. Rotate the MENU dial to highlight TAPE  
LENGTH. Press in the MENU dial to select it.  
(The TAPE LENGTH menu appears.)  
VIDEO indicator  
5. Rotate the MENU dial to highlight the length of  
the tape you are using (T20, T30, T35, T40).  
(T20=20 minutes, T30=30 minutes, etc. in SP  
mode.) Press in the MENU dial to select it.  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
W
C
T
N
E
F
/
E
D
E
A
I
U
O
G
I
A
.
C
F
P
D
6. When finished, press in the MENU dial again to  
exit.  
Note: The tape remaining time feature is  
accurate only if the correct tape length has  
been selected.  
26  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Using the Monitors  
Chapter Overview:  
Seeing What You Are Recording  
On-screen Icons  
Changing Entertainment. Again.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
Seeing What You Are Recording  
To see what is recording, use either the LCD monitor or the viewfinder monitor. When  
the LCD monitor is open more than 25˚, the viewfinder turns off. When you close the  
LCD monitor, the viewfinder turns on.  
Using the LCD Monitor  
The camcorder’s LCD monitor is a miniature color screen that you can use for recording  
playback.  
1. Open the LCD monitor at least 25˚. The  
viewfinder turns off.  
2. For convenient viewing, the LCD monitor can  
180°  
be tilted once it is open 90˚ from the camera  
body. Tilt the monitor forward up 180˚ or down  
up to 90˚.  
• From a high angle (such as over a crowd)—  
tilt the monitor down to record.  
• From a low angle (such as when kneeling)—  
tilt the monitor up to record.  
90°  
3. Adjust the brightness of the LCD monitor by  
turning the bright control (MENU dial). This  
doesn’t affect the brightness of the recording  
you are making.  
• Turn the dial toward + to brighten the image.  
• Turn the dial toward – to darken the image.  
4. When finished recording, close the monitor and  
lock it into place.  
Note: Recording outdoors on bright, sunny  
days can make the LCD monitor hard to see.  
Use the viewfinder instead.  
Cautions  
Never force the LCD monitor to rotate completely around. This could damage both  
the monitor and/or the camcorder.  
When carrying the unit with the shoulder strap, close the monitor to prevent possible  
damage to it.  
28  
Chapter 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
Viewfinder  
Eyepiece focus  
control  
Using the Viewfinder  
The camcorder’s viewfinder is a miniature monitor  
that displays in black and white (color for the  
CC6394). For convenient viewing, rotate the  
viewfinder up or down.  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
F
AU  
TO  
E
/
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
Note: When the LCD monitor is open more  
than 25˚, the viewfinder turns off.  
M
A
Y
L P  
Eyepiece Focus Control  
The eyepiece focus control lets you set the focus of  
the viewfinder for your vision. If you wear  
eyeglasses, you probably can operate the camcorder  
without them.  
It is easiest to set the correct focus by focusing on  
one of the viewfinder’s on-screen displays. Look  
through the viewfinder and adjust the eyepiece focus  
control for your vision.  
Note: The eyepiece focus control does not  
affect the focus of the image captured by the  
camcorder.  
Cautions  
Never force the viewfinder to rotate completely  
around. This will damage the viewfinder and/or  
the camcorder.  
When carrying the camcorder with the shoulder  
strap, put the viewfinder down to help prevent  
possible damage to it.  
Chapter 2  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
On-screen Icons  
Several displays appear on the LCD monitor or in the viewfinder to aid in the  
operation of the camcorder. Although it may look crowded, all of the icons  
shown below do not appear on-screen at the same time. Also, not all screen  
icons are shown in the illustration. Refer to the icon descriptions that follow.  
S
ET  
SP  
120M I N  
REC SP  
SET  
T
40  
02  
:
:
TBC  
1
2 3 4 5  
AT  
F I NE 15  
+
SVHS REC  
MWB  
PAUSE  
5
M I N  
1 / 2  
BR I GHT  
S
– – – – – – – – – –  
+
CONGRATULAT I ONS  
DEC 25. 01 AM 11 45 18  
:
:
––––– –––––  
+
VOLUME  
Recording Menu Icons  
Playback Menu Icons  
*S-VHS and S-VHS ET icons are for the CC6394 only.  
Warning Icons  
Indicates the amount of power left in the rechargeable battery.  
An empty battery icon flashes on screen when the battery’s power is  
almost exhausted.  
A
Missing Cassette: Appears when the Power switch is set to either or  
M
(automatic or manual record) and no cassette tape is in the  
camcorder.  
Head Cleaning: HEAD CLEANING REQUIRED USE CLEANING  
CASSETTE appears if dirt is detected on the recording heads. Use an  
optional cleaning cassette to remove dirt.  
30  
Chapter 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
Condensation: CONDENSATION, OPERATION PAUSED PLEASE WAIT  
appears if moisture occurs inside the camcorder. When this icon  
appears, wait at least one hour before using the camcorder again.  
TAPE END  
LENS CAP  
End of Cassette: Appears when a tape reaches its end during  
recording or playback.  
Covered Lens: Appears briefly after the power is turned on to either  
automatic or manual record mode and the lens cap is still attached.  
Safeguard: The error icons (E01-E06) show what type of malfunction  
has occurred. If an error icon and warning appear, turn the unit off,  
remove the power supply (battery, etc.) and wait a few minutes for the  
warnings to clear. If they do, you can resume using the camcorder. If  
the warnings remain, consult your nearest RCA authorized service  
center.  
E01-E06  
Recording and Playback Icons  
Auto Date, Date, Time, or Date and Time Icons  
Indicates the current date and time and is recorded when they are  
displayed (see page 89).  
DEC 25. 01  
AM 11:45:18  
Chapter 2  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
Special Effect Icons  
Appears when you select SEPIA to give your recordings a brown-  
tone like old photographs.  
SEPIA  
Appears when you select SPORTS to record fast-moving action,  
such as sporting events.  
SPORTS  
Appears when you select SD:SHADOW to darken the picture and  
reduce glare.  
SD:SHADOW  
Appears when you select HZ:HAZE to soften the picture and give  
it a misty white effect.  
HZ: HAZE  
TWILIGHT  
Appears when you select TWILIGHT to record scenes at twilight,  
fireworks, etc.  
Appears when you select 1/2000 to record faster-moving action  
than the SPORTS mode.  
2
S1/2000  
Appears when you select NEGA POSI to reverse the colors and  
create a negative image.  
NEGA POSI  
Appears when you select MOSAIC to record scenes in a mosaic  
pattern.  
MOSAIC  
Appears when you select STRETCH to record scenes which are  
double the horizontal width of the picture.  
STRETCH  
Appears when you select B/W MONOTONE to record scenes in  
classic black and white.  
B/W  
MONOTONE  
32  
Chapter 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
Preset Titles  
The preset title selected in the TITLE menu appears here. It will be recorded on the  
tape when it appears.  
M. W. B. (Manual White Balance) Icons  
The icon for the manual white balance selected in the M.W.B. menu appears here.  
Appears when you select  
:FINE to record outdoors on a sunny day.  
Appears when you select  
day.  
:CLOUD to record outdoors on a cloudy  
Appears when you select  
tungsten lighting.  
:HALOGEN to record using halogen or  
MWB  
MWB appears when you select MWB to adjust the color temperatures.  
Status Icons  
Appears when the camcorder is recording.  
REC  
PAUSE  
Appears during record-standby.  
Appears when the camcorder plays a tape.  
Appears during play-pause.  
Appears during fast forward and flashes during forward search.  
Appears during rewind and flashes during reverse search.  
Tracking Icons  
Appears during automatic tracking.  
Appears during manual tracking.  
AT  
MT  
Chapter 2  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
Zoom Icon  
Appears when you use the zoom lever.  
4X  
Bright and Volume Icons  
BRIGHT  
Appears when you adjust the brightness of the monitor with the  
BRIGHT dial.  
During playback, the VOLUME icon appears when you adjust the  
volume of the speaker with the VOL control (also zoom lever).  
VOLUME  
Exposure Icon  
This icon appears when you are adjusting brightness manually using  
the EXPOSURE menu.  
+03  
Fade and Wipe Icons  
Press the FADE/WIPE button to display the icon for the fade or wipe you want to select.  
Appears when you select black fade.  
B
K
Appears when you select mosaic fade.  
Appears when you select shutter wipe.  
Appears when you select slide wipe.  
Appears when you select door wipe.  
Appears when you select corner wipe.  
Appears when you select window wipe.  
34  
Chapter 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
Focus Icons  
Appear when you are adjusting focus manually using the FOCUS menu.  
The icons also flash when the auto-focus system cannot operate  
properly or you can’t adjust the focus any farther.  
These icons flash while you adjust manual focus (see page 86).  
Animation and Time-Lapse Recording Icons  
Appears when you select the interval time for time-lapse recording (  
15S, 30S, 1MIN, or 5MIN; 15S=15 seconds, 30S=30 seconds, etc.).  
15S  
1S  
Appears when you select the recording time for animation or time-  
lapse recording (  
1/4S, 1/2S, 1S, or 5S; 1/4S=1/4 of a second, 1/2S=  
1/2 of a second, etc.) (see pages 91-92).  
Other Icons  
Steady Pix Icon  
Appears when you are using Steady Pix (see page 41).  
Tape Length Icon  
Indicates what tape length you have selected (T20, T30, T35, or T40;  
T20=20 minutes, T30=30 minutes, etc.) (see page 26).  
T20  
Tape Speed Icon  
Indicates what tape speed you have selected (SP/SLP) (see page 25).  
SP  
Chapter 2  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Monitors  
TBC (Time Base Corrector) Icon  
Appears when the time base corrector is turned on (see page 48).  
TBC  
Time Counter Icon  
Appears during playback. It is not recorded. An M appears in front of  
the time counter when memory-stop is on (see page 49).  
M0:00:00  
Time-Remaining Icon  
Indicates the approximate time remaining on the tape.  
120MIN  
Picture Quality Icon  
Indicates the quality of picture you have selected and the number of  
pictures remaining for that quality (see page 59).  
FINE 30  
Snapshot Icon  
Indicates the type of snapshot selected (other than FULL) (see page 60).  
P
P is displayed for PIN-UP.  
M4 is displayed for MULTI-4.  
M9 is displayed for MULTI-9.  
36  
Chapter 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
Recording  
Chapter Overview:  
Recording Details  
Recording Tips  
Changing Entertainment. Again.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
C
O
U
N
LI  
GH  
T
Recording Details  
T
E
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
P
O
T
S
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
1. Remove the lens cap.  
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
A
M
2. Set the Power switch to or  
(automatic  
M
A
Y
P
record or manual record mode). (The VIDEO  
indicator comes on.)  
3. Open the LCD monitor or adjust the viewfinder.  
4. Press and release the Recording Start/Stop  
button to start recording. (REC appears in the  
viewfinder or LCD monitor (but won’t be  
recorded.))  
M
A
F
Y A  
L
P
5. When finished recording, press and release the  
Recording Start/Stop button again to stop  
recording. The camcorder is now in the record-  
pause mode. (PAUSE appears in the viewfinder  
or on the LCD monitor.)  
Recording Start/  
Stop button  
Power switch  
VIDEO indicator  
Notes:  
If the Record-Standby mode continues  
for 5 minutes without performing Zoom  
or any other operations, the camcorders  
power shuts off automatically. Set the  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
A
O
I
D
Power switch to OFF, and then back to  
A
.
C
F
P
M
or  
to turn the camcorder on again.  
If you are recording on a tape from the  
middle (such as when a tape is removed  
and reinserted during recording), use the  
Retake function (see page 39) to find the  
end of the last recording so you do not  
erase any of it.  
To remove the icons from the  
camcorders display during recording, see  
page 78.  
Journalistic Shooting  
In some situations, different shooting angles may  
provide more dramatic results. Hold the camcorder  
in the desired position and tilt the LCD monitor in  
the most convenient direction. It can rotate 270° (90°  
downward, 180° upward).  
38  
Chapter 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Self-Recording  
You can shoot yourself while viewing your own  
image in the LCD monitor. Open the LCD monitor  
and tilt it upward 180° so that it faces forward, then  
point the lens toward yourself and start recording.  
Quick Review  
STOP  
R
RETAKE  
F
You can check the end of the last recording.  
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
1. Make sure the camcorder is in the Record–  
Standby mode.  
U
D
G
I
O
A
.
C
F
P
D
2. Press  
and release quickly. (The tape is  
rewound for approximately 2 seconds and  
played back automatically, then pauses in  
Record–Standby mode for the next shot.)  
Rewind and RETAKE buttons  
Note: Distortion may occur at the start of  
playback. This is normal.  
Retake  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
You can also rerecord certain segments.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
1. Make sure the camcorder is in the Record–  
Standby mode.  
M
A
Y
P
2. Press and hold either RETAKE button to reach  
the start point for new recording. Pressing  
forwards the tape and pressing  
reverses it.  
3. Press the Recording Start/Stop button to start  
recording.  
M
A
F
Y A  
L
P
Note: Noise bars appear and pictures may  
become monochrome or darken during  
Retake. This is normal.  
Recording Start/  
Stop button  
Chapter 3  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Digital and Optical Zooming  
You can zoom in and out for close-up or wide-angle shots by moving the zoom lever on  
the camcorder. The camcorder automatically focuses at most distances when zooming.  
Optical zooming is possible up to 16 times, and digital zooming allows up to 400 times  
normal magnification.  
Using the Zoom Lever (W and T)  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
To zoom in tight (telephoto) or out wide (wide  
angle), rotate the zoom lever to either T or W.  
KIN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
With telephoto zooming it is possible to capture  
images to a maximum of 400 times normal  
magnification. To do this, the camcorder uses  
technology to artificially enhance the image.  
M
A
Y
P
Optical zoom is the natural, non-enhanced  
magnification that the camcorder’s lens will support.  
This camcorder has an optical zoom of 16 times  
(16X).  
Zoom lever  
When using the zoom lever, an icon appears on  
screen to display the approximate zoom ratio.  
Notes:  
While zooming, focusing may become  
unstable. If so, set the zoom while in  
record-standby mode and adjust the  
image using manual focus (see page 86).  
Once the focus is set, zoom the  
camcorder in or out while recording.  
The zoom level icon moves during zoom.  
Once it reaches the top of the zoom icon  
bar, all magnification from that point is  
through digital processing.  
Tip  
The further you rotate the zoom  
lever, the quicker the zoom action.  
During digital zoom, the quality of  
image may suffer.  
40  
Chapter 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
MENU  
dial  
STEADY PIX  
button  
Using Digital Zoom  
You can use digital zoom to magnify images to a  
maximum of 400 times normal magnification.  
C
O
U
N
LI  
GH  
T
T
E
A
D
R
OF  
E
R
F
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E  
F
L
VO  
M
H
OT  
PS  
1. Set the Power switch to  
(manual record). If the  
S
NA  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
AD  
TE  
DSC indicator is on, press REFRESH for  
approximately 1 second to select VIDEO.  
S
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
Y
L P  
2. Press in the MENU dial. (The CAMERA MENU  
appears.)  
3. While TO SYSTEM MENU is highlighted, press in the  
MENU dial again. (The SYSTEM MENU appears.)  
M
4. Rotate the MENU dial to highlight D. ZOOM. Press  
in the MENU dial to select it. (The D. ZOOM menu  
appears.)  
A
F
Y A  
L
P
5. Rotate the MENU dial to highlight the desired  
setting. Press in the MENU dial to select it.  
Power switch  
6. Press in the MENU dial again to exit.  
VIDEO indicator  
Using Steady Pix™  
Digital Image Stabilization is used to compensate for  
unstable images cause by camera shake, especially at  
high magnifications.  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
T
I
E
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
To turn on image stabilization, press the STEADY PIX  
button. (  
appears.)  
To turn off image stabilization, press STEADY PIX again.  
(The icon disappears.)  
REFRESH button  
Notes:  
Accurate stabilization may not be possible if  
hand shake is excessive, or when recording the  
following:  
subjects with vertical or horizontal stripes.  
dark or dim subjects.  
subjects with excessive backlighting.  
scenes with movement in various directions.  
scenes with low-contrast backgrounds.  
Switch off stabilization when the camcorder is  
mounted to a tripod.  
The  
icon blinks or disappears if image  
stabilization cant be used.  
Chapter 3  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Using the Video Light  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
To brighten the scene when natural lighting is too  
dim, the camcorder uses a built-in video light.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
You can turn on the video light at all times, set to  
turn on automatically when the camcorder senses  
additional light is needed, or turn off altogether.  
Set the LIGHT switch as desired:  
OFF  
Turns off the light.  
AUTO  
Automatically allows the camcorder to  
turn on the light when there is  
VIDEO indicator  
insufficient lighting on the subject.  
STOP  
R
RETAKE  
F
ON  
Keeps the light on at all times as long  
as the camcorder is turned on.  
M
/
R
E
P
R
E
T
I
W
C
T
E
F
/
N
E
D
E
A
I
G
U
O
I
D
A
.
C
F
P
Video Light Details  
VIDEO light  
switch  
Even if the battery icon (  
) doesn’t blink due to  
low battery charge, the camcorder may turn off  
automatically when you turn on the video light, or if  
the video light is turned on when you start a  
recording.  
When LIGHT OFF/AUTO/ON switch is set to AUTO:  
E
T
C
E
J
R
R
F
E
I
V
H
S
E
O
E
D
D
C S  
G R  
C
A
H
G I  
D
E
T C E F  
I
E A .  
P
F
F
E
K
E P I  
W
/
E
D A  
A
T
E
R
ME  
NU/  
BRI  
E T N U O C  
/TR  
GHT  
R
M
/
R
R
O
ACK  
F F  
ING  
U
A
O
T
P
O
T
S
N O  
SNA  
PSH  
L
OT  
T
H G  
I
VO  
L
The video light may keep turning on and off  
depending on the lighting conditions. If this  
happens, manually switch the light ON or OFF  
using the LIGHT OFF/AUTO/ON switch.  
+
ST  
EA  
DY  
PI  
X/  
TB  
C
+
I
/
T
If the Sports or High Speed Shutter mode is  
turned on, the video light is likely to stay on.  
While in Twilight mode, the light won’t activate.  
Video light  
Notes:  
The video light can only be used when  
the camcorder is on.  
Set the white balance to artificial light  
(
) when using the video light to avoid  
a washed-outlook.  
When not using the video light, turn it  
off to save battery power.  
42  
Chapter 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Cautions  
Never operate the video light closer than 1 foot to people or other  
objects.  
The video light becomes very hot. Do not touch it during use or right  
after use. Serious injury may result.  
Do not place the camcorder in a carrying case right after using the  
light.  
Never operate the video light close to flammable or explosive material.  
Consult your nearest RCA authorized service center to replace the  
video light.  
The video light and bulb need to cool for approximately 30 minutes  
after use before the bulb assembly is replaced.  
Chapter 3  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Recording Tips  
To improve picture quality and color reproduction, try to make sure indoor scenes  
are well-lit.  
Don’t move the camcorder rapidly from side-to-side while recording. A steady,  
gradual “pan” avoids blurring and “jitter”.  
Use the viewfinder or LCD monitor to make sure the camcorder is level while  
recording so that your scene isn’t “tilted.”  
Do not bump or tap the camcorder’s microphone while recording as this sound will  
be recorded.  
Include close-ups of individuals when taping family outings or group functions.  
Fading in and out of scenes makes your videos appear more professional.  
Learn to use the special effects to add variety to your recordings.  
Be aware of video and audio backgrounds. Background details barely noticed while  
recording may show up as visual “clutter” on your recording. Background noises  
(especially TV sets, radios, household appliances, traffic sounds, etc.) might detract  
from the sound you want to record.  
Avoid long “still” shots of landmarks and scenic attractions. Recordings are more  
interesting if they include people and details. “Local color” gives travel videos lasting  
appeal. To add interest, consider recording a familiar or landmark scene from an  
unfamiliar vantage point.  
44  
Chapter 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
Playback  
Chapter Overview:  
Playback Options  
Choose Your Connection  
Changing Entertainment. Again.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
C
O
U
N
LI  
GH  
T
Playback Options  
T
E
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
P
O
T
S
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
BC  
/T  
The camcorder’s playback features include displaying  
still images and high-speed shuttle search. In this  
section, you’ll also learn how to connect your  
camcorder to a TV, VCR, or computer.  
X
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
Playback features (Play, Pause, Forward, Reverse,  
Stop) can be handled using the camcorder’s buttons.  
M
A
F
Y A  
L
P
Power switch  
VIDEO indicator  
Basic Playback  
1. Insert a tape.  
STOP  
R
RETAKE  
F
2. Set the Power switch to  
(playback mode).  
M
/
R
E
P
(The VIDEO indicator comes on.)  
R
E
T
I
W
C
T
E
F
/
N
U
E
D
E
A
I
G
O
I
D
A
.
C
F
P
3. Press  
(Play-Pause button) to start playback.  
/
To stop playback, press (Stop button).  
Press  
(Rewind button) to reverse playback  
(Fast Forward button) to  
direction, or the  
Playback buttons  
advance the tape while in stop mode.  
Notes:  
If stop mode continues for 5 minutes  
when power is supplied from a battery,  
the camcorder shuts off automatically to  
conserve power. To turn the camcorder  
on again, set the Power switch to OFF,  
then to back to  
(playback mode).  
When the Power switch is set to  
and the LCD monitor is opened at an  
angle of 25˚ or more, the LCD monitor  
switches on and the viewfinder switches  
off automatically to save power.  
46  
Chapter 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
If a blank portion on the tape is played  
back, the screen may become black. This  
is not a malfunction.  
Tips  
The playback picture can be viewed  
in the viewfinder (with the LCD  
monitor shut), on the LCD monitor,  
or on a connected TV (see page 54).  
LCD monitor/viewfinder indications:  
When power is supplied from a battery  
appears. When power is supplied  
through the power supply,  
not appear.  
does  
You can also view the playback  
picture on the LCD monitor with it  
flipped over and retracted.  
When a tape is stopped, no icons  
appear.  
BRIGHT dial VOL lever  
Adjusting the LCD Monitor Brightness  
Rotate the BRIGHT dial towards + to brighten, or - to  
darken.  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
E
R
F
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
E
F
C
T
T
S
P
O
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
Controlling Speaker Volume  
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
Slide the Zoom Lever (VOL.-+) towards + to turn up  
the volume, or towards – to turn down the volume.  
M
A
A
F
O
Y
L P  
Chapter 4  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
TRACKING dial  
Adjusting the Tracking  
You may need to eliminate noise bars that appear  
on-screen during playback. The default setting is  
Auto Tracking.  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
1) Press in the TRACKING dial for approximately 2  
M
A L  
A
F
O
Y
seconds. (MT appears).  
P
2) Rotate the TRACKING dial until the noise bars  
disappear.  
To return to Auto Tracking, press in the  
TRACKING dial for approximately 2 seconds or  
set the Power switch to OFF and then to  
again. AT blinks. (When Auto Tracking finishes,  
the icon disappears.)  
TBC button  
M
A
F
Y A  
L
P
When noise bars appear during playback, the  
camcorder enters the Auto Tracking mode and  
AT appears  
Power switch  
Manual Tracking may not work with tapes that  
were recorded on other VCRs or camcorders.  
Using TBC (Time Base Corrector)  
You may need to remove jitter from fluctuating video  
signals to deliver a stable picture even with old  
tapes. The default setting is for TBC to be activated.  
To activate the TBC mode, press the TBC button  
during playback for more than 1 second. (TBC  
appears.)  
To deactivate TBC, press the TBC button during  
playback for more than 1 second. (TBC disappears.)  
48  
Chapter 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Using Counter Memory  
STOP  
R
RETAKE  
F
Counter Memory makes it easier to locate a specific  
tape segment.  
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
1. Press and hold the COUNTER R/M button for  
more than 1 second. (The counter resets to  
0:00:00.)  
2. Press COUNTER R/M for less than 1 second. (M  
COUNTER R/M  
button  
Playback buttons  
appears.)  
3. After recording or playback, press , then  
.
(The tape automatically stops at or near 0:00:00.)  
4. Press to start playback.  
/
The counter memory functions both in the Fast-  
Forward and Rewind modes.  
To disable the Counter Memory Function, press  
COUNTER R/M for less than 1 second until M  
disappears.  
Still Playback Mode  
Still playback pauses the tape, freezing a  
single frame.  
1. Press the Play/Pause button ( ) during playback  
/
to freeze the image.  
2. To resume normal playback, press the Play/  
Pause button again.  
• Video “noise” appears on the screen and the  
picture may become monochrome during still  
playback. This is normal.  
• If pause continues for more than a few  
minutes, the camcorder may turn off.  
• After approximately 5 minutes in stop mode,  
the power turns off automatically.  
Chapter 4  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
STOP  
R
RETAKE  
F
Shuttle Search  
Shuttle search allows high-speed searching in either  
forward or reverse directions.  
M
/
R
E
P
R
E
T
I
W
C
T
N
U
O
E
F
/
E
D
E
A
I
G
I
D
A
.
C
F
P
1. Press  
or  
during playback.  
2. To resume normal playback, press  
• During playback, press and hold  
.
/
or  
.
Playback buttons  
The search continues as long as you hold  
down the button. Once released, normal  
playback resumes.  
• A slight mosaic effect appears on screen  
during shuttle search. This is normal.  
• Video “noise” appears on the screen and the  
picture may become monochrome during  
shuttle search. This is normal.  
50  
Chapter 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Choose your Connection  
This manual includes information for some basic types of connections. You may also  
need to refer your TV and VCR user’s guides for specific instructions.  
Cassette tape  
adapter  
Using the Cassette Tape Adapter  
Before choosing a connection, you may find it easier  
to use the cassette tape adapter.  
The camcorder uses a smaller size tape, but records  
in standard VHS format. The cassette tape adapter  
allows you to play your VHS-C tapes in a VCR just  
like other standard VHS tapes.  
Insert the VHS-C tape into the cassette tape adapter.  
Insert the adapter into the VHS VCR like a normal  
VHS tape.  
1. Remove battery compartment cover.  
Battery compartment cover  
2. Install supplied “AA” battery so positive (+) and  
negative (–) ends align properly with (+) and (–)  
terminals in battery compartment.  
3. Replace battery compartment cover.  
Notes:  
Replace the battery when the load time  
becomes much longer than normal.  
Remove the battery from the cassette  
tape adapter if it is not used for a month  
or more. This prevents possible damage  
from battery leakage. If leakage occurs,  
wipe up the liquid inside the  
compartment and replace the battery  
with a new one.  
Chapter 4  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
VHS-C tape  
Inserting the Tape into the Cassette Tape  
Adapter  
1. Before inserting the tape into the adapter,  
remove any slack in the tape by turning the tape  
wheel on the side of the tape.  
2. Slide EJECT to the right to open the tape  
compartment lid.  
Tape window  
3. Insert the tape with the tape window on the left  
and facing up.  
Tape wheel  
Allow the tape to drop into the adapter. Do not  
force the tape.  
Cassette tape  
adapter  
4. Gently close the tape compartment lid until it  
locks into place. Make sure the tape reel area  
under the adapter is free to turn while the tape  
is loading.  
Note: You should hear a whirring sound  
while the tape loads.  
EJECT switch  
52  
Chapter 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Removing the Tape from the Cassette  
Tape Adapter  
1. Slide the adapter’s EJECT switch to the right. The  
load detector extends from the side and the  
whirring sound indicates the tape is being  
released before the adapter’s tape compartment  
lid opens.  
2. Use the access hole on the bottom of the  
adapter to push the tape up and remove it from  
the adapter.  
EJECT switch  
3. Gently close the adapter’s tape compartment lid.  
Caution: If the load detector is still extending  
from the side of the cassette tape adapter after  
youve attempted to load the tape, loading is not  
complete. Try to load the tape again. Attempting  
to insert the cassette tape adapter into a VCR with  
the load detector extended may cause damage to  
the adapter and/or VCR.  
Caution: Do not touch the reels during loading  
and unloading. It could cause injury or damage  
the cassette tape adapter or tape.  
Notes:  
Tapes recorded in S-VHS or S-VHS ET  
mode cannot be played back on a  
regular VHS VCR. Playback is possible  
with a VCR equipped with the S-VHS or  
SQPB (S-VHS QUASI PLAYBACK) function  
(CC6394 only).  
During special-effect playback (still  
frame, etc.), the picture may vibrate or  
noise bars may appear on the screen.  
To record on a VCR using a compact tape  
and the adapter, cover the adapters  
recording safety hole with adhesive tape.  
Chapter 4  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
TV or VCR  
C
O
U
LI  
N
GH  
T
A
D
R
OF  
E
R
F
AU  
P
M
P
I
W
TO  
A
E
P
E
ON  
D
G
F
C
T
S
O
T
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
IGH  
AC  
/TR  
/BR  
G
KIN  
NU  
ME  
+
C
TB  
X/  
PI  
DY  
EA  
ST  
+
L
TA  
GI  
)
DI  
UT  
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
1
2
3
4
Connecting to a TV (or VCR) with Audio/Video Input Jacks  
To connect your camcorder to a TV monitor (or VCR) with audio/video input jacks, you  
need an optional audio/video cable, such as VH83 (see page 117). If your TV is already  
connected to a VCR, attach the camcorder to the VCR and watch what the camcorder is  
recording or playing on the TV.  
1. Attach the white plug on one end of the  
audio/video cable to the AUDIO IN jack on  
the TV (or VCR).  
Optional S-video and Audio  
Connection (CC6394 only)  
TV or VCR  
2. Attach the yellow plug to the VIDEO IN jack  
on the TV (or VCR).  
U
LIG  
HT  
T
OFF  
A
R
P
P
W
M
AUT  
O
O
N
E
E
F
T
O
T
S
P
R
A
T
E
R
E
K
F
VOL  
OT  
PSH  
SNA  
IGHT  
U/BR  
KING  
MEN  
/T  
RAC  
+
TBC  
P
IX/  
Y
L
AD  
STE  
+
I
G
IT  
A
IN  
/
U
T
)
D
O
Optional  
S-video  
cable  
C
(DS  
A
F
Y
A
P
3. Attach the white plug on the other end of the  
audio/video cable to the  
A (audio) jack (located under the small cover)  
on the side of the camcorder.  
4. Attach the yellow plug to the yellow V (video)  
jack on the camcorder.  
Audio cable*  
Notes:  
If your TV (or VCR) has stereo AUDIO  
IN jacks, you need a Y-adapter to hear  
both channels.  
*An audio cable must also be  
used when using an S-video  
connection. The S-video cable  
only transfers video  
If your TV or VCR has an S-Video input  
jack, connect the camcorder to the TV  
or VCR using an optional S-Video cable.  
This can improve the picture quality  
(CC6394 only).  
information.  
54  
Chapter 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
T
S
P
O
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
Playback on a TV (or VCR) with  
M
A
A
F
O
Y
L P  
Audio/Video Input Jacks  
1. Turn on the TV and tune it to the video input  
channel or turn on VCR and place it in the “line”  
or “camera mode”. (If your VCR does not have a  
“line” or “camera mode”, consult the VCR  
owner’s manual.) Operate the TV as you  
normally do to see the signal coming from the  
VCR.  
M
A
F
Y A  
L
P
2. Set the Power switch to playback  
VIDEO indicator comes on.)  
mode. (The  
Power switch  
3. Press  
.
VIDEO indicator  
/
During playback, use the playback features  
STOP  
R
RETAKE  
F
(see page 46).  
4. Press STOP when you are finished.  
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
Notes:  
It is recommended to use the power  
supply instead of the battery pack for  
power to achieve uniform playback.  
Adjust the TV sound volume to its  
minimum level to avoid a sudden burst  
of sound when the camcorder is turned  
on.  
Playback buttons  
If you have a TV or speakers that are not  
specially shielded, do not place the  
speakers next to the TV as interference  
will occur in the camcorder playback  
picture.  
To view the picture and sound from the  
camcorder without recording, set the  
A
M
camcorders Power switch to or  
,
then set your TV to the appropriate  
input mode.  
Chapter 4  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Tape Dubbing  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
1. Following the illustration in this chapter,  
connect the camcorder and the VCR.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
Y
P
2. Set the camcorder’s Power switch to  
, turn  
on the VCR’s power, and insert the appropriate  
tapes in the camcorder and the VCR.  
3. Make sure the VCR is in the appropriate AUX  
mode and the Record-Pause mode.  
M
A
F
4. Use the camcorder’s Play mode to find a spot  
just before the edit-in point. Once it is reached,  
Y A  
L
P
press  
on the camcorder.  
/
Power switch  
5. When you’re ready to start recording, press  
on the camcorder and press the appropriate  
record button on the VCR.  
/
STOP  
R
RETAKE  
F
6. When you want to stop recording, press the  
VCR’s pause button and press  
camcorder.  
on the  
/
M
/
R
E
P
R
E
T
I
W
C
T
N
U
O
E
F
/
E
D
E
A
I
G
I
D
A
.
C
F
P
7. Repeat steps 4 through 6 for additional editing,  
then stop the VCR and camcorder when  
finished.  
Note: If you wish to dub still images recorded  
with the DSC indicator on, play back the still  
images, and instead of doing the above steps  
4 through 6, engage the VCRs Record mode  
Playback buttons  
56  
Chapter 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5  
Digital Still Camera  
Chapter Overview:  
Digital Still Camera Recording and Playback  
System Requirements for Picture Navigator  
Connecting to a Windows® PC  
Changing Entertainment. Again.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Digital Still Camera Recording and Playback  
When using the Digital Still Camera (DSC) feature, still pictures are recorded in the  
camcorder’s built-in memory. These pictures can be transferred to a PC, saved, and edited  
using the included cable and software.  
You can choose the quality of the pictures you want to record and four types of  
snapshots. These snapshots can be viewed, protected, and deleted from memory.  
Note: Some sample pictures have been stored in memory, and you can use the  
delete function to remove them.  
58  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Setting the Picture Quality  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
You can adjust the picture quality to fine or standard,  
depending on what kind of picture you want.  
Because standard quality pictures take up less  
memory, the camera can store more of them than in  
fine mode.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
Y
P
M
1. Set the Power switch to  
(manual record).  
MENU dial  
(The VIDEO indicator comes on.)  
2. Press the MENU dial in. (The CAMERA MENU  
M
A
F
appears.)  
Y A  
L
P
3. Rotate the MENU dial to highlight TO SYSTEM  
MENU. Press in the MENU dial to select it. (The  
SYSTEM MENU appears.)  
Power switch  
4. Rotate the MENU dial to highlight PICTURE.  
Press in the MENU dial to select it. (The  
PICTURE menu appears.)  
VIDEO indicator  
5. Rotate the MENU dial to highlight FINE or  
STOP  
R
RETAKE  
F
STANDARD.  
M
/
Note: The number of storable images  
depends on the selected picture mode as well  
as the composition of the subjects in the  
images.  
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
Picture Quality Mode  
FINE  
Approx. Number of Storable Pictures*  
30  
60  
STANDARD  
* The numbers listed above are applicable when the camcorders memory is empty  
(when there are no sample snapshots stored).  
Chapter 5  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Selecting a Snapshot Mode  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
You can choose from 4 ways to display your digital  
pictures, including full, pin-up, multi-4, and multi-9.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
M
1. Set the Power switch to  
(manual record). The  
L P  
VIDEO or DSC indicator comes on.  
2. If the DSC indicator is not on, press the  
REFRESH button for approximately 1 second.  
(The DSC indicator comes on.)  
MENU dial  
M
A
3. Press the MENU dial in. (The CAMERA MENU  
F
Y A  
L
P
appears.)  
4. Rotate the MENU dial to highlight TO SYSTEM  
MENU. Press in the MENU dial to select it. (The  
SYSTEM MENU appears.)  
Power switch  
5. Rotate the MENU dial to highlight SNAPSHOT.  
Press in the MENU dial to select it. (The  
SNAPSHOT menu appears.)  
DSC  
VIDEO  
indicator indicator  
6. Rotate the MENU dial to highlight the type of  
snapshot you want to take.  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
W
C
T
E
F
/
N
E
D
E
A
I
G
U
O
I
D
A
.
C
F
P
60  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Select FULL to take a full screen snapshot with  
no frame.  
Select PIN-UP to have the snapshot framed like a  
picture.  
Select MULTI-4 to take four snapshots in a quick  
progression (giving the illusion of movement)  
and place all four snapshots within one shot.  
Select MULTI-9 to take nine shapshots in a quick  
progression (giving the illusion of movement)  
and place all nine images within one shot.  
Note: Snapshots taken in a dark area may  
become coarse and lose their true colors.  
Chapter 5  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
SNAPSHOT button  
Taking Snapshots  
1. Remove the lens cap.  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
T
S
P
O
R
R
E
K A T E  
M
A
2. Set the Power switch to  
or (manual or  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
automatic record). (The VIDEO or DSC indicator  
comes on.)  
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
3. If the DSC indicator is not on, press the REFRESH  
button for approximately 1 second. (The DSC  
indicator comes on.)  
MENU dial  
4. When you’re ready to take a picture, press  
SNAPSHOT.  
M
A
F
Notes:  
Y A  
L
P
When the remaining picture number icon  
blinks 0, you must delete some pictures  
before you can store new ones.  
Power switch  
Some sample images have been stored in  
the built-in memory at the factory. If you  
want to delete them, first unprotect them  
(see page 68), then delete them (see page  
69).  
DSC  
indicator  
VIDEO  
indicator  
If a snapshot is taken while the camcorder  
is in the 16 x 9 mode (see page 78), the  
snapshot image is recorded without the  
black bars at the top and bottom of the  
screen.  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
During the DSC recording, the zooming  
(see page 40), Steady Pix(see page 41)  
and Video Light (see page 42) functions  
can be operated.  
REFRESH button  
Snapshots are taken in a format based on  
JPEG (Joint Photographic Experts Group).  
When you use the LCD monitor outdoors  
under direct sunlight, the LCD monitor may  
be difficult to see. If this happens, close the  
LCD monitor and use the viewfinder  
instead.  
To store the snapshots you shot, we  
recommend that you transfer them to a  
computer and save them on disk (see page  
73), or transfer them to a VCR connected to  
the camcorder and record them onto a  
tape.  
62  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Quick Review (to check the last shot stored  
in the built-in memory)  
M
A
1. Set the Power switch to  
or (manual or  
automatic record). (The VIDEO or DSC indicator  
comes on.)  
2. If the DSC indicator is not on, press REFRESH  
for approximately 1 second. (The DSC indicator  
comes on.)  
3. Press  
and release quickly. (The snapshot is  
STOP  
R
RETAKE  
F
displayed for approximately 3 seconds. DELETE?  
M
/
PRESS PLAY BUTTON appears.)  
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
To delete the snapshot, press  
.
/
If you want to keep it, wait for the delete  
message to disappear.  
Playback buttons  
Chapter 5  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Normal Playback  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
The snapshots you take are automatically numbered,  
then stored in numerical order in the built-in  
memory. You can view them using the Index and  
Slideshow features.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
Y
P
1. Set the Power switch to  
DSC indicator comes on.)  
. (The VIDEO or  
MENU dial  
2. If the DSC indicator is not on, press REFRESH  
for approximately 1 second. (The DSC indicator  
comes on and a snapshot stored in memory is  
displayed.)  
M
A
F
Y A  
L
P
3. To go to the previous picture, press  
. To go  
Power switch  
to the next picture, press  
.
Notes:  
When no snapshots are stored in  
memory, the screen is blue.  
When the Power switch is set to  
and the LCD monitor is opened at an  
angle of 60˚ or more, the LCD monitor  
switches on and the viewfinder switches  
off automatically to save power.  
DSC  
indicator indicator  
VIDEO  
STOP  
R
RETAKE  
F
The playback picture can be viewed in  
the viewfinder (with the LCD monitor  
shut), on the LCD monitor or on a  
connected TV (see page 54).  
M
/
R
E
P
R
E
T
I
W
C
T
N
E
F
/
E
D
E
A
I
G
U
O
I
D
A
.
C
F
P
When viewing a picture on a connected  
TV, it may jitter slightly.  
You can also view the picture on the LCD  
monitor with it flipped over and  
retracted.  
REFRESH button  
To brighten the LCD monitor, rotate the  
BRIGHT dial towards +. To darken the  
LCD monitor, rotate it towards .  
Dont worry about overwriting your  
pictures. New pictures are automatically  
stored after the last one you took.  
64  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Slide Show  
You can automatically look at all the snapshots stored  
in memory in numerical order.  
1. Set the Power switch to  
DSC indicator comes on.)  
. (The VIDEO or  
2. If the DSC indicator is not on, press REFRESH for  
approximately 1 second. (The DSC indicator  
comes on and a snapshot stored in memory is  
displayed.)  
3. Press in the MENU dial. (The DSC menu appears.)  
4. Rotate the MENU dial to highlight SLIDE SHOW.  
Press in the MENU dial to select it. (The slide  
show starts.)  
Note: To stop the slide show, press in the  
MENU dial twice.  
Index  
With the Index feature, you can view your snapshots  
in groups of 6. This also allows you to see which  
picture mode was selected for each picture and which  
ones are protected against accidental erasure.  
01: Index number  
The first snapshot taken is index #01. Let’s say, for  
example, that a total of 10 images are stored (index  
number: 01 to 10) in memory. If three images  
(numbers 02, 04, and 06) are deleted from memory,  
the remaining images are automatically moved up to  
fill any gaps in the numerical sequence. Therefore, the  
number of remaining images is 7, and the new index  
numbers range from 01 to 07.  
: Picture mode  
This icon tells you what the picture mode is of the  
snapshot. There are 2 modes available: FINE and  
STANDARD (see page 59). A star is displayed next to  
snapshots shot in the FINE mode. There are no marks  
next to snapshots shot in the STANDARD mode.  
Chapter 5  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
C
O
U
N
LI  
T
E
GH  
T
A
D
F
R
OF  
E
R
F
AU  
TO  
W
M
: Protect icon  
.
P
A
E
E
ON  
D
G
I
E
C
T
P
O
T
S
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
When an image is protected against accidental  
erasure, the padlock icon appears next to the picture  
mode icon.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
Y
P
Selected Image  
The image you have selected is highlighted with a  
box. Rotate the MENU dial to move the box to  
another image.  
MENU dial  
M
A
F
Y A  
L
P
Index Playback  
1. Set the Power switch to  
DSC indicator comes on.)  
. (The VIDEO or  
Power switch  
2. If the DSC indicator is not on, press REFRESH  
for approximately 1 second. (The DSC indicator  
comes on and a snapshot stored in memory is  
displayed.)  
DSC  
indicator  
VIDEO  
indicator  
STOP  
R
RETAKE  
F
3. Press in the MENU dial. (The DSC menu  
appears.)  
M
/
R
E
P
R
E
T
I
W
C
T
N
E
F
/
E
D
E
A
I
G
U
O
I
D
A
.
C
F
P
4. Rotate the MENU dial to highlight INDEX. Press  
in the MENU dial to select it. (The index of the  
images in memory appears.)  
REFRESH button  
66  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Protecting Images  
The Protect mode helps prevent images from being  
erased. When the padlock icon appears next to the  
Picture Mode icon, that image can’t be deleted.  
1. Set the Power switch to  
DSC indicator comes on.)  
. (The VIDEO or  
2. If the DSC indicator is not on, press REFRESH  
for approximately 1 second. (The DSC indicator  
comes on and a snapshot stored in memory is  
displayed.)  
Padlock icon  
3. Press in the MENU dial. (The DSC menu  
appears.)  
4. Rotate the MENU dial to highlight PROTECT.  
Press in the MENU dial to select it. (The index of  
the images in memory appears.)  
5. Rotate the MENU dial to highlight the image you  
want to protect. Press in the MENU dial to select  
it. A padlock icon appears on the image. It can’t  
be deleted now. Repeat this procedure for all  
images you want to protect.  
Important: When the memory is initialized  
or corrupted, even protected images are  
deleted. If you dont want to lose important  
images, transfer them to a PC and save them.  
Chapter 5  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Unprotecting Images  
1. Set the Power switch to  
DSC indicator comes on.)  
. (The VIDEO or  
2. If the DSC indicator is not on, press REFRESH  
for approximately 1 second. (The DSC indicator  
comes on and a snapshot stored in memory is  
displayed.)  
3. Press in the MENU dial. (The DSC menu  
appears.)  
4. Rotate the MENU dial to highlight PROTECT.  
Press in the MENU dial to select it. (The index of  
the images in memory appears.)  
5. Rotate the MENU dial to highlight the image you  
want to unprotect. Press in the MENU dial to  
select it. (The padlock icon disappears from the  
image.) It can now be deleted. Repeat this  
procedure for all images you want to unprotect.  
The image is no longer  
protected.  
68  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Deleting Images  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
You can delete your snapshots one at a time or all at  
once.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
Deleting Select Images  
1. Set the Power switch to  
DSC indicator comes on.)  
. (The VIDEO or  
MENU dial  
2. If the DSC indicator is not on, press REFRESH  
for approximately 1 second. (The DSC indicator  
comes on and a snapshot stored in memory is  
displayed.)  
M
A
F
Y A  
L
P
3. Press in the MENU dial. (The DSC menu  
Power switch  
appears.)  
4. Rotate the MENU dial to highlight DELETE. Press  
in the MENU dial to select it. (The DELETE menu  
appears.)  
DSC  
indicator  
VIDEO  
indicator  
5. Rotate the MENU dial to highlight SELECT. Press  
in the MENU dial to select it. (The index of the  
images in memory appears.)  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
6. Rotate the MENU dial to highlight the image you  
want to delete.  
7. Press in the MENU dial to select it. (A red “X”  
appears on the image.)  
P. AE button REFRESH button  
8. When finished, rotate the MENU dial to NEXT at  
the top of the screen. Press in the MENU dial to  
select it.  
9. Rotate the MENU dial to highlight ENTER. (The  
image(s) are deleted.)  
Note: To cancel deleting images, rotate the  
MENU dial to highlight CANCEL and press it  
twice.  
Chapter 5  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Initializing the Built-in Memory  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
External noise and interference (from a TV, a radio,  
etc.) might prevent your camcorder from functioning  
properly. If images can’t be stored or deleted, you  
may need to initialize the memory. This will erase all  
the images (including protected images).  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
If you want to keep any of the snapshots that are  
stored in memory, you need to transfer them to a PC  
and save them first before initializing the memory. If  
image data is corrupt, transfer is impossible.  
MENU dial  
M
A
F
Y A  
L
P
1. Set the Power switch to  
.
2. If the DSC indicator is not on, press REFRESH  
for approximately 1 second. (The DSC indicator  
comes on and a snapshot stored in memory is  
displayed.)  
Power switch  
2. Press P.AE for more than 5 seconds. (The  
DSC  
indicator  
FORMAT menu appears.)  
3. Rotate the MENU dial to select CANCEL or  
STOP  
R
RETAKE  
F
ENTER. Press in the MENU dial to select it.  
M
/
CANCEL does not initialize the memory.  
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
ENTER initializes the memory. (While the  
camcorder’s memory is being erased, ENTER  
blinks. When finished, the screen becomes  
blue.)  
REFRESH button  
Very important: Never turn off the camcorder or  
remove the power (battery or AC) while the  
memory is being erased. The built-in memory may  
become corrupt.  
70  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Deleting All Images  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
1. Set the Power switch to  
indicator comes on.)  
. (The VIDEO or DSC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
2. If the DSC indicator is not on, press REFRESH for  
approximately 1 second. (The DSC indicator comes  
on and a snapshot stored in memory is displayed.)  
Y
L P  
3. Press in the MENU dial. (The DSC menu appears.)  
MENU dial  
4. Rotate the MENU dial to highlight DELETE. Press in  
the MENU dial to select it. (The DELETE menu  
appears.)  
M
A
F
Y A  
L
P
5. Rotate the MENU dial to highlight ALL. Press in the  
MENU dial to select it.  
Power switch  
6. Rotate the MENU dial to highlight ENTER. (The  
images are deleted.)  
Note: To cancel deleting images, rotate the  
MENU dial to highlight CANCEL and press it  
twice.  
DSC  
indicator  
VIDEO  
indicator  
STOP  
R
RETAKE  
F
Very important: Never turn off the camcorder or  
remove the power (battery or AC) while the memory  
is being erased. The built-in memory may become  
corrupt.  
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
Notes:  
REFRESH button  
Protected images (see pages 67-68) cannot  
be deleted with the above operation. To  
delete them, remove protection first.  
If the remaining number of shots is not 30  
in the FINE mode or 60 in the STANDARD  
mode after you have deleted all the images,  
initialize the camcorders memory (see page  
70).  
Chapter 5  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
System Requirements for Picture Navigator  
66 MHz or faster (Pentium recommended) for Microsoft®* Windows®* 98 or later  
CPU 468DX2/50 MHz or faster for Microsoft® Windows® 95 or later  
16MB RAM  
6MB free hard disk space  
CD-ROM drive  
Color display capable of at least 640 x 680 pixels, 256 colors (recommended 800 x  
600 pixels, 32,000 colors)  
1 free serial transmission port, compatible with 9600 bps or higher transmission rate,  
connectable to RS-232C with 9-pin serial connector  
Note: An optional 9-pin serial conversion adapter is required for computers using a  
serial communication port other than a standard 9 pin.  
Mouse (Windows® compatible)  
* Microsoft® and Windows® registered trademarks of Microsoft Corporation.  
72  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Connecting To A Windows® PC  
Image data stored in the camcorder’s built-in memory can be transferred to a Windows®  
PC and saved using the image transfer software, Picture Navigator.  
To assure safety, make sure all units are turned off before making any connection.  
1. Insert the Picture Navigator CD-ROM into your drive.  
2. Double click the installer icon and follow the on-screen instructions to install the  
software.  
3. Connect the camcorder’s DIGITAL jack to the COM Port (RS-232C) on a Windows®  
PC, using the PC connection cable.  
C
O
U
LI  
N
GH  
T
T
A
R
OF  
F
D
R
E
AU  
P
W
M
TO  
A
E
ON  
E
D
G
I
C
S
T
T
O
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
IGH  
/TR  
/BR  
G
KIN  
NU  
ME  
AC  
+
C
TB  
X/  
PI  
DY  
EA  
ST  
+
L
TA  
GI  
)
DI  
T
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
L
A
N
T
I
G
I
)
T
D
D
U
O
/
I
C
S
(
4. Set the Power switch to  
. (The VIDEO or DSC indicator comes on.)  
5. If the DSC indicator is not on, press REFRESH for approximately 1 second. (The DSC  
indicator comes on and a snapshot stored in memory is displayed.)  
When transferring snapshots to a computer, be sure that the snapshot is  
displayed on the screen before continuing.  
6. Launch the software on your Windows® PC and transfer the snapshots stored in the  
camcorder’s memory to your Windows® PC. Refer to the software’s instruction  
manual on the CD-ROM for details.  
During transfer of the snapshot, the camcorder’s screen becomes blue and PC  
MODE is displayed. After transferring is finished, the screen displays the same  
snapshot as in step 5.  
7. Close the software, then turn off the camcorder.  
Windows® is a trademark of Microsoft Corporation, registered in the U.S.A. and other  
countries.  
Chapter 5  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Still Camera  
Notes:  
Before transferring snapshots from your personal computer to the camcorders  
built-in memory, check that the desired Picture Mode has been selected for the  
images (see page 60). The snapshots will be transferred from the personal  
computer in the selected Picture Mode.  
When transferring snapshots from your personal computer to the camcorder,  
make sure the number of images to be transferred is smaller than the  
camcorders remaining number of shots available.  
Use the power supply instead of the battery pack to power the camcorder.  
The snapshots stored in the camcorders memory are not automatically  
removed after you transfer them to the PC. Youll still need to delete them.  
74  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
Advanced Features  
Chapter Overview:  
Using the Menus for Advanced Adjustment  
Menu Definitions  
Using the Advanced Features  
Changing Entertainment. Again.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
C
O
U
N
LI  
GH  
T
Using the Menus For  
Advanced Adjustment  
T
E
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
This camcorder is equipped with an on-screen menu  
system that simplifies many of the more detailed  
camcorder settings.  
M
A
A
F
O
Y
L P  
M
1. Set the Power switch to manual record ( ).  
MENU  
dial  
Press REFRESH for approximately 1 second to  
select VIDEO or DSC according to each  
function’s “*/**” explanation described at the  
bottom of pages 77 and 79.  
M
A
F
Y A  
L
P
2. Press in the MENU dial. The CAMERA MENU  
Power switch  
appears.  
3. Rotate the MENU dial to highlight the desired  
function.  
DSC  
indicator  
VIDEO  
indicator  
To go from the CAMERA MENU to the  
SYSTEM MENU, rotate the MENU dial to  
highlight TO SYSTEM MENU. Press in the  
MENU dial to select it. The SYSTEM MENU is  
composed of 2 pages. To go to the next  
page, rotate the MENU dial to highlight  
NEXT. Press in the MENU dial to select it.  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
W
C
T
N
E
F
/
E
D
E
A
I
G
U
O
I
D
A
.
C
F
P
To return to the CAMERA MENU from page  
2 of the SYSTEM MENU, rotate the MENU  
dial to highlight TO CAMERA MENU. Press  
in the MENU dial to select it.  
REFRESH button  
4. Press in the MENU dial to display the menu for  
the function you have selected and rotate it to  
select the desired setting.  
5. Press in the MENU dial. The CAMERA MENU or  
the SYSTEM MENU reappears with RETURN  
highlighted.  
6. Press in the MENU dial to exit.  
76  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Menu Definitions  
The following charts will help you get acquainted with the various menus and some brief  
definitions of their features. For more detailed explanation, refer to the corresponding  
sections.  
Camera Menu  
FOCUS  
Refer to Focusing (see page 85).  
EXPOSURE  
M.W.B.  
Refer to Exposure Control (see page 84).  
Refer to White Balance Adjustment and Manual White Balance  
Operation (see pages 87-88).  
TITLE*  
Allows you to superimpose one of eight preset titles (see page 90).  
DATE/TIME DISP.* Makes the date/time settings appear in the camcorder or on a  
connected monitor (see page 89).  
System Menu  
This menu can’t be accessed while recording.  
REC MODE*  
D. ZOOM  
Allows you to set the recording mode (SP or SLP) (see  
page 25).  
50X  
Factory Preset: Allows you to use the Digital Zoom. By  
digitally processing and magnifying images, zooming is  
possible from 16X (the optical zoom limit), to a  
maximum of 50X digital magnification.  
400X Allows you to use the Digital Zoom. By digitally  
processing and magnifying images, zooming is possible  
from 16X (the optical zoom limit), to a maximum of  
400X digital magnification.  
OFF  
Digital Zoom isn’t available. Only optical zoom  
(maximum 16x magnification) can function. When set to  
OFF during Digital Zoom, zoom magnification changes  
to 16X.  
*
Activated only when VIDEO is selected (the DSC indicator is not on). If DSC is  
selected (the DSC indicator is on), this function will not be activated even though the  
highlight bar on the menu will move to that position.  
Functions listed without an asterisk are available when either DSC or VIDEO is selected.  
Chapter 6  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
System Menu (continued)  
Factory Preset: Doesn’t display black bars.  
16 x 9  
OFF  
ON  
Allows you to record black bars at the top and bottom of  
the screen to produce a cinema-like wide-screen effect.  
If you take a snapshot in the 16x9 mode, the snapshot is  
recorded without the black bars.  
Factory preset: Records in S-VHS format on a VHS or S-  
VHS tape (see page 23).  
S-VHS ***  
ON  
Records in S-VHS ET format on a VHS tape (see page 23).  
(S-VHS ET ***)  
TAPE LENGTH  
OFF  
Allows you to set the tape length depending on the tape  
used (see page 26).  
Factory Preset: Make all of the icons appear on the LCD  
monitor/viewfinder during playback or recording.  
DISPLAY  
FULL  
Make the following icons disappear from the LCD monitor/  
viewfinder during recording or playback: cassette warning,  
tape remaining time, battery pack remaining power icon  
and tape length icon.  
SIMPLE  
Refer to Picture Mode Setting (see page 59).  
PICTURE**  
Displayed when DSC (the DSC indicator is on), is selected  
SNAPSHOT**  
FULL  
(see pages 60-61).  
PIN-UP  
MULTI-4  
MULTI-9  
REC TIME*  
INT. TIME  
Refer to Animation and Time-Lapse (see pages 91-92).  
Refer to Time-Lapse (see page 92).  
TELE MACRO  
OFF  
ON  
Factory preset (OFF) : Usually the distance to a subject  
where the lens is in focus depends on the zoom  
magnification. Unless there is a distance of more than 1 m  
(3.23 ft.) to the subject, the lens is out of focus at the  
maximum telephoto setting. When set to ON, you can  
shoot a subject as large as possible at a distance of  
approximately 60 cm (23-5/8¨).  
Depending on the zoom position, the lens may go out of  
focus.  
78  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Allows you to select the language (ENGLISH, FRENCH, or  
TITLE LANG*  
SPANISH) of Instant Titles (see page 90).  
Allows you to set the current date and time (see page 22).  
DATE/TIME  
Factory Preset: Demonstrates certain functions automatically.  
When DEMO MODE is set to ON and you have exited all  
menus, the demonstration starts.  
DEMO MODE* ON  
Operating the Power zoom lever during the demonstration  
stops the demonstration temporarily. If the Power zoom  
lever is not moved for more than 1 minute after that, the  
demonstration will resume.  
M
To cancel the demo mode, rotate the Power switch to  
(manual record) and press in the MENU dial while the demo  
is in progress. This takes you directly to the DEMO MODE  
menu (so you will not have to go through the main menu).  
Rotate the MENU dial to highlight OFF. Then press in the  
MENU dial again to select it.  
Note: When a tape is loaded in the camcorder, the  
demonstration is not available.  
OFF  
Automatic demonstration will not take place.  
*
Activated only when VIDEO is selected (the DSC indicator is not on). If DSC is  
selected (the DSC indicator is on), this function will not be activated even though the  
highlight bar on the menu will move to that position.  
** Activated only when DSC is selected (the DSC indicator comes on). If VIDEO is  
selected (the DSC indicator is not on), this function will not be activated even though  
the highlight bar on the menu will move to that position.  
Functions listed without */** are available when either DSC or VIDEO is selected.  
*** S-VHS ET is displayed when a VHS tape is loaded, and S-VHS is displayed when an  
S-VHS tape is loaded (see page 23). If a tape is not loaded, S-VHS appears.  
S-VHS ET is preset to OFF.  
Chapter 6  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Using the Advanced Features  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
P
O
T
S
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
Fade/Wipe Effects  
M
A
Y
L P  
These effects let you make professional-looking  
scene transitions. Fade-ins or wipe-ins work at  
recording start, and fade-outs or wipe-outs work at  
recording end.  
MENU  
dial  
M
1. Set the Power switch to  
(manual record).  
M
A
2. If the DSC indicator comes on, press REFRESH  
for approximately 1 second to select VIDEO.  
F
Y A  
L
P
3. Press FADE/WIPE repeatedly until the desired  
mode’s name and icon appear. (They are  
Power switch  
Recording  
Start/Stop  
button  
displayed for approximately 2 seconds, then the  
name disappears so that only the icon remains.)  
4. Press the Recording Start/Stop button to activate  
fade-in/out or wipe-in/out.  
DSC  
indicator  
VIDEO  
indicator  
5. To cancel a fade or wipe, press FADE/WIPE  
repeatedly until OFF appears. (OFF is displayed  
for approximately 2 seconds and the fade/wipe  
standby mode is cancelled.)  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
W
C
T
N
E
F
/
E
D
E
A
I
G
U
O
I
D
A
.
C
F
P
Fades  
FADER  
Fades in/out to a black screen.  
B
K
FADE/WIPE  
button  
REFRESH button  
MOSAIC  
Gradually turns/returns the picture into/from a  
mosaic pattern.  
80  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Wipes  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
T
S
P
O
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
SHUTTER  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
Wipes in as a black screen from the top and bottom,  
closing over the image like a shutter. Wipes out as a  
new image, pushing open the black screen vertically  
from the center.  
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
Y
L P  
SLIDE  
MENU  
dial  
Wipes in as a black screen moves in from the left to  
gradually cover the image. Wipes out as a new image  
moves in from right to left.  
M
A
F
Y A  
L
P
DOOR  
Power switch  
Recording  
Start/Stop  
button  
Wipes in as the two halves of a black screen open to  
the left and right, revealing the scene. Wipes out and  
the black screen reappears from left and right to  
cover the scene.  
CORNER  
DSC  
indicator  
VIDEO  
indicator  
Wipes in on a black screen from the upper right to  
the lower left corner, revealing the scene. Wipes out  
from lower left to upper right, leaving a black screen.  
STOP  
R
RETAKE  
F
M
/
R
E
P
R
E
T
I
C
T
W
E
F
WINDOW  
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
Wipes in on a black screen from the center of the  
screen towards the corners, revealing the scene.  
Wipes out from the corners to the center, leaving a  
black screen.  
P.AE button REFRESH button  
Note: Pressing and holding the Recording  
Start/Stop button allows you to vary the  
length for the image during fade in/out or  
wipe in/out.  
Chapter 6  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Program AE With Special Effects  
M
1. Set the Power switch to  
(manual record).  
2. Press REFRESH for approximately 1 second to select VIDEO or DSC.  
3. Press P.AE repeatedly until the desired mode’s name and icon appear. (They are  
displayed for approximately 2 seconds, then the name disappears so that only the  
icon remains.)  
4. To cancel the effect, press P.AE repeatedly until OFF appears. OFF is displayed for  
approximately 2 seconds.  
Note: Only one mode can be engaged at a time.  
SPORTS  
High shutter speed clearly captures fast-moving action.  
SD : SHADOW  
A black mist darkens the picture, as when an ND filter is used. Helps to counter the  
effects of glare on the subject.  
HZ : HAZE  
Makes the picture look misty white, as if you’re using an external fog filter and softens  
the image.  
TWILIGHT  
Dusk, twilight scenery, fireworks, etc., look more natural and dramatic. When Twilight  
mode is selected:  
Auto gain control is turned off.  
White Balance is set to FINE (day mode), but can also be manually changed to  
another mode (see page 87).  
Auto Focus becomes available only in the range of 10 m (32 ft.) to infinity. To focus  
when the subject-to-camera distance is less than 10 m (32 ft.), use manual focusing  
(see page 86).  
82  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
C
O
U
N
LI  
GH  
T
2
T
E
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
T
S
P
O
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
S1/2000  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
(1/2000 sec. High Speed Shutter)  
Captures faster action than Sports mode.  
M
A
A
F
O
Y
L P  
Notes:  
The screen becomes slightly dark in the  
High Speed Shutter mode. Use in well-lit  
situations.  
MENU  
dial  
In the High Speed Shutter or Sports  
modes, picture color may be adversely  
affected if the subject is lit by alternating  
discharge-type light sources such as  
fluorescent or mercury-vapor lights.  
M
A
F
Y A  
L
P
Power switch  
Digital Effects  
M
1. Set the Power switch to ) (manual record).  
2. Press REFRESH for approximately 1 second to  
select VIDEO or DSC.  
DSC  
indicator  
VIDEO  
indicator  
3. Press DIGIFECT repeatedly until the desired  
mode’s name and icon appear. (They are  
STOP  
R
RETAKE  
F
displayed for approximately 2 seconds, then the  
name disappears so that only the icon remains.)  
M
/
R
E
P
R
E
T
I
W
C
T
N
U
O
E
F
/
E
D
E
A
I
G
I
D
A
.
C
F
P
4. To cancel the effect, press DIGIFECT repeatedly  
until OFF appears. (OFF is displayed for  
approximately 2 seconds.)  
DIGIFECT  
button  
REFRESH button  
SEPIA  
Recorded scenes have a brownish tint like old  
photos. Combine this with the 16x9 mode (see page  
78) for a classic look.  
B/W MONOTONE  
Recorded scenes are shot in black and white.  
Combine this with the 16x9 mode (see page 78) for a  
classic look.  
Chapter 6  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
NEGA POSI (Negative Positive)  
The colors of a picture are reversed.  
MOSAIC  
Turns recorded scenes into a mosaic pattern.  
STRETCH  
Doubles the width of the picture horizontally.  
Note: Digital Effects can be changed during recording or during Record-Standby.  
Exposure Control  
This feature automatically adjusts the iris for the best available picture quality, but you  
can override it and make the adjustment manually. Manual exposure adjustment is  
recommended in the following situations:  
When shooting using reverse lighting or when the background is too bright.  
When shooting on a reflective natural background such as at the beach or when  
skiing.  
When the background is overly dark or the subject light.  
M
1. Set the Power switch to  
(manual record).  
2. Press REFRESH for approximately 1 second to select VIDEO or DSC.  
3. Press in the MENU dial. (The CAMERA MENU appears.)  
4. Rotate the MENU dial to highlight EXPOSURE. Press in the MENU dial to highlight it.  
(The EXPOSURE menu appears.)  
5. Rotate the MENU dial to highlight MANU (manual). Press in the MENU dial to select  
it. (The menu disappears and 00 (exposure control level counter) appears.)  
To brighten the image, rotate the MENU dial downward. (The exposure control  
level counter increases (maximum +06)).  
To darken the image, rotate the MENU dial upward. (The exposure control level  
counter decreases (maximum –06)).  
6. Press in the MENU dial to select it.  
7. When finished, press in the MENU dial again to exit.  
84  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
T
S
P
O
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
GH  
RI  
/B  
NU  
ME  
G
KIN  
AC  
/TR  
Notes:  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
To return to the factory setting, select  
AUTO in step 5.  
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
To readjust exposure, repeat the  
procedure from step 3.  
MENU  
dial  
Focusing  
M
A
Auto Focus  
F
Y A  
L
The camcorder’s Full Range automatic focus system  
offers continuous shooting ability from close-up to  
infinity. However, correct focus may not be  
obtainable in the situations listed below (in these  
cases use manual focusing):  
P
Power switch  
When two subjects overlap in the same scene.  
When illumination is low. The low-contrast  
warning  
appears.  
DSC  
indicator  
VIDEO  
indicator  
When the subject has no contrast (difference in  
brightness and darkness), such as a flat, one-  
color wall, or a clear, blue sky. The low-contrast  
STOP  
R
RETAKE  
F
warning  
appears.  
M
/
R
E
P
R
E
T
I
W
C
T
E
F
/
N
U
E
D
E
A
I
G
O
I
D
A
.
When a dark object is barely visible in the  
viewfinder. The low-contrast warning  
appears.  
C
F
P
REFRESH button  
When the scene contains small patterns or  
identical patterns that are regularly repeated.  
When the scene is affected by sunbeams or light  
reflecting off the surface of a body of water.  
When shooting a scene with a high-contrast  
background.  
Chapter 6  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Manual Focus  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
HT  
IG  
BR  
U/  
G
Make the necessary viewfinder adjustments to use  
the viewfinder (see page 29).  
N
ME  
K
IN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
M
1. Set the Power switch to  
(manual record).  
A
F
O
Y
L P  
Press REFRESH for approximately 1 second to  
select VIDEO or DSC.  
2. Press the MENU dial in. (The CAMERA MENU  
MENU  
dial  
appears.)  
M
3. Rotate the MENU dial to highlight FOCUS. Press  
in the MENU dial to select it. (The FOCUS menu  
appears.)  
A
F
Y A  
L
P
4. Rotate the MENU dial to highlight MANU. Press  
Power switch  
in the MENU dial to select it. (The menu  
disappears and  
appears.) The focus is  
locked at this point.  
5. When finished, press in the MENU dial again to  
exit. (  
locked.)  
reappears to indicate the focus is  
DSC  
indicator  
VIDEO  
indicator  
To focus on a subject that’s farther away, rotate  
the MENU dial upward. appears and blinks.  
STOP  
R
RETAKE  
F
M
/
R
To focus on a nearer subject, rotate the MENU  
dial downward. appears and blinks.  
E
P
R
E
T
I
W
C
T
E
F
/
N
E
D
E
A
I
G
U
O
I
D
A
.
C
F
P
Notes:  
If the lens is smeared or blurred,  
REFRESH button  
accurate focusing isnt possible. Keep the  
lens clean, wiping it with a piece of soft  
cloth if it gets dirty. If condensation  
occurs, wipe the lens with a soft cloth or  
wait for it to dry naturally.  
When shooting a subject close to the  
lens, zoom out first (see page 40). When  
zooming in the auto focus mode, the  
camcorder could automatically zoom out  
depending on the distance between the  
camcorder and the subject.  
To return to Auto Focus, highlight AUTO  
in step 4.  
To readjust Manual Focus, repeat the  
procedure from step 2.  
When the focus level cannot be adjusted  
any farther or closer,  
or blinks.  
86  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
White Balance Adjustment  
White balance refers to the correctness of color reproduction under various lighting. If  
the white balance is correct, all other colors will be accurately reproduced.  
The white balance is usually adjusted automatically. However, more advanced  
camcorder operators control this function manually to achieve a more professional  
color/tint reproduction.  
M
1. Set the Power switch to  
(manual record). Press REFRESH for approximately 1  
second to select VIDEO or DSC.  
2. Press in the MENU dial. (The CAMERA MENU appears.)  
3. Rotate the MENU dial to highlight M.W.B. Press in the MENU dial to select it. (The  
M.W.B. menu appears.)  
4. Rotate the MENU dial to highlight the desired setting.  
AUTO  
White balance is adjusted automatically (factory preset).  
: FINE  
Outdoors on a sunny day.  
: CLOUD  
Outdoors on a cloudy day.  
: HALOGEN  
A video light or similar type of lighting is used.  
MWB  
White balance is set manually.  
Notes:  
To return to automatic white balance, select AUTO in step 4. Or rotate the  
Power switch to (automatic record).  
A
White balance cannot be used when the SEPIA or MONOTONE mode (see  
page 83) is activated.  
Chapter 6  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Manual White Balance  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
HT  
IG  
BR  
U/  
G
Perform Manual White Balance when shooting under  
various types of lighting.  
N
ME  
K
IN  
AC  
/TR  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
1. Follow steps 1 through 4 of the white balance  
A
F
O
Y
L P  
adjustment, and highlight MWB.  
2. Hold a sheet of plain white paper in front of the  
subject. Adjust zoom or position yourself so that  
the white paper fills the screen.  
MENU  
dial  
M
Note: It may be difficult to focus on the  
white paper. In such a case, adjust focus  
manually (see page 86).  
A
F
Y A  
L
P
3. Press in the MENU dial until MWB begins  
blinking.  
Power switch  
4. When finished, press in the MENU dial to exit.  
To change the tint for recording in step 2,  
substitute colored paper for white. The white  
balance is adjusted based on the color, changing  
the tint.  
DSC  
indicator  
VIDEO  
indicator  
Red paper = deeper green  
Blue paper = orange  
STOP  
R
RETAKE  
F
Yellow paper = deeper purple.  
M
/
R
E
P
R
E
T
I
W
C
T
E
F
/
N
U
E
D
E
I
G
Notes:  
A
O
I
D
A
.
C
F
P
A subject can be shot under various types  
of lighting conditions indoors (natural,  
fluorescent, candlelight, etc.). Because  
the color temperature is different  
depending on the light source, the  
subject tint will differ depending on the  
white balance settings. Use this function  
for a more natural result.  
DIGIFECT  
button  
REFRESH button  
Once you adjust white balance manually,  
the setting is retained even if the power  
is turned off or the battery removed.  
88  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Date/Time Insert  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
You can display the date and time in the camcorder  
or on a connected TV, as well as to record them  
manually or automatically.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
You should have already performed the Date/Time  
Setting procedure (see page 22).  
M
1. Set the Power switch to  
(manual record). If  
the DSC indicator is on, press REFRESH for  
approximately 1 second to select VIDEO.  
MENU  
dial  
M
A
F
2. Press in the MENU dial. (The CAMERA MENU  
Y A  
L
P
appears.)  
3. Rotate the MENU dial to highlight DATE/TIME  
DISP. Press in the MENU dial to select it. (The  
DATE/TIME DISP. menu appears.)  
Power switch  
4. Rotate the MENU dial to highlight the desired  
mode. Press in the MENU dial to select it. (The  
desired mode is activated.)  
DSC  
indicator  
VIDEO  
indicator  
Notes:  
DISPLAY  
STOP  
R
RETAKE  
F
The selected display can be recorded.  
M
/
R
E
P
R
E
T
I
C
If you do not want to record the display,  
select the OFF mode before shooting.  
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
The date/time is displayed during the  
VIDEO mode only, and it is recorded only  
onto the tape.  
REFRESH button  
AUTO DATE  
In this mode, the date is replaced after 5  
seconds with AUTO DATE but isnt  
recorded.  
Your camcorder automatically records  
the date for about 5 seconds after you  
do the following:  
Change the date.  
Load a tape.  
Select Auto Date Record mode  
by rotating the MENU dial.  
Chapter 6  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Instant Titles  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
A
E
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
OT  
SH  
AP  
SN  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
The camcorder has 8 preset titles in memory. You  
can superimpose one of them over the video image.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
AL  
IT  
IG  
D
T)  
U
/O  
IN  
SC  
(D  
M
A
A
F
O
Y
L P  
Instant Titles can be displayed in English, French,  
and Spanish.  
M
1. Set the Power switch to  
(manual record). If  
the DSC indicator is on, press REFRESH for  
approximately 1 second to select VIDEO.  
MENU  
dial  
M
A
2. Press in the MENU dial. (The CAMERA MENU  
F
Y A  
L
appears.)  
P
3. Rotate the MENU dial to highlight TITLE. Press  
in the MENU dial to select it. (The TITLE menu  
appears.)  
Power switch  
4. Rotate the MENU dial to highlight the desired  
mode. Press in the MENU dial to select it.  
Notes:  
DSC  
indicator  
VIDEO  
indicator  
The title is displayed during the VIDEO  
mode only, and it is recorded only onto  
the tape.  
STOP  
R
RETAKE  
F
The selected title will remain until OFF is  
selected in the TITLE Menu.  
M
/
R
E
P
R
E
T
I
W
C
T
E
F
/
N
E
D
E
A
I
G
U
O
I
D
A
.
C
F
P
REFRESH button  
90  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Animation  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
O
T
S
P
R
R
E
K A T E  
F
L
VO  
.
R
EC  
5
S
EC  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
You can shoot a series of pictures, each slightly  
different, of the same object for a brief period of  
time.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
M
A
A
F
O
Y
L P  
M
1. Set the Power switch to  
(manual record). If  
the DSC indicator is on, press REFRESH for  
approximately 1 second to select VIDEO.  
MENU  
dial  
2. Make sure the recording mode is set to SP.  
M
A
3. Press in the MENU dial. (The CAMERA MENU  
F
Y A  
L
appears.)  
P
4. Rotate the MENU dial to highlight TO SYSTEM  
MENU. Press in the MENU dial to select it. (The  
SYSTEM MENU appears.)  
Power switch  
Recording  
Start/Stop  
button  
5. Rotate the MENU dial to highlight NEXT. Press in  
the MENU dial to select it. (The next page of the  
SYSTEM MENU appears.)  
DSC  
indicator  
VIDEO  
indicator  
6. Rotate the MENU dial to highlight REC TIME.  
Press in the MENU dial to select it. (The REC  
TIME menu appears.)  
STOP  
R
RETAKE  
F
7. Rotate the MENU dial to select the desired  
recording time. Press in the MENU dial to select  
it. (The SYSTEM MENU reappears with RETURN  
highlighted.)  
M
/
R
E
P
R
E
T
I
C
T
W
E
F
/
N
E
E
A
I
U
D
G
I
O
A
.
C
F
P
D
8. Press the MENU dial in again to close the  
REFRESH button  
SYSTEM MENU.  
9. Press the Recording Start/Stop button after  
focusing on the subject. The recording stops  
automatically after the selected period of time.  
Repeat for the desired number of pictures.  
10. To stop the Animation mode, set REC TIME in  
the SYSTEM MENU to OFF.  
Chapter 6  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Features  
Time-Lapse  
C
O
U
N
LI  
T
E
GH  
T
A
D
R
OF  
R
F
E
/
AU  
TO  
W
M
.
P
E
A
E
ON  
D
G
I
E
C
T
T
P
S
O
R
R
E
K A T E  
F
L
VO  
.
R
EC  
5
S
EC  
T
KIN  
GH  
RI  
/B  
NU  
ME  
G
AC  
/TR  
You can record sequentially at preset time spans.  
Leaving the camcorder aimed at a specific subject,  
you can record subtle changes over an extended  
period of time.  
+
C
TB  
X/  
PI  
Y
D
EA  
ST  
+
M
A
A
F
O
Y
L P  
1. Set REC TIME using steps 1-7 of Animation (see  
page 91).  
MENU  
dial  
2. Rotate the MENU dial to highlight INT. TIME.  
Press in the MENU dial to select it. (The INT.  
TIME menu appears.)  
M
A
F
Y A  
L
P
3. Rotate the MENU dial to highlight the desired  
interval time. Press in the MENU dial to select it.  
Power switch  
Recording  
Start/Stop  
button  
4. When finished, press in the MENU dial again to  
exit.  
5. Press the Recording Start/Stop button.  
(Recording and intervals alternate automatically.)  
6. To release the Time-Lapse mode, press the  
PAUSE  
Recording Start/Stop button to display  
Then set REC TIME and INT. TIME in the menus  
to OFF.  
.
Notes (for Animation and Time-Lapse):  
For best results, make sure the camcorder  
is secured when shooting in Animation  
or Time-Lapse mode.  
Fade-in/out or wipe-in/out cant be  
performed during Animation or Time-  
Lapse shooting.  
After using Animation or Time-Lapse  
recording, make sure the modes are  
deactivated.  
Animation and Time-Lapse are cancelled  
when the power is shut off or when the  
tape is ejected.  
92  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7  
Other Information  
Chapter Overview:  
Troubleshooting  
Final Notes  
Care and Cleaning  
Traveling Tips  
Specifications  
Customer Assistance and Service  
Limited Warranty  
FCC Declaration of Conformity and Industry Canada  
Information  
Optional Accessories  
Index  
Changing Entertainment. Again.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Troubleshooting  
If you’re having problems with your camcorder, try the solutions in this section. If the  
problem still exists, please consult your nearest RCA authorized service center.  
External noise and interference (from a TV, a radio, etc.) might prevent your camcorder  
from functioning properly. In such cases, first disconnect its power supply unit (battery  
pack, AC power supply, etc.); and then reconnect it and proceed as usual from the  
beginning.  
Power Problems  
No power is supplied.  
The battery pack has not been attached correctly (see page 16).  
The battery pack is not charged (see page 16).  
The power supply has not been correctly connected (see page 11).  
The power suddenly goes off and does not come back on by itself.  
Turn the Power switch off and then on again.  
The battery pack has completely discharged.  
Remove the tape and disconnect the power source, then after a few minutes, try  
reconnecting and turning the power back on. If it still does not come on, consult  
your nearest RCA authorized service center.  
Feature and Function Problems  
Some menus or features are not available.  
A
M
The Power switch is set to . Set it to  
and try again.  
During recording, the icons do not appear.  
Set DISPLAY to FULL in the SYSTEM MENU (see page 78).  
Vertical white lines appear when shooting a very bright object.  
This sometimes occurs when there is a lot of contrast between the background and the  
object. It is not a defect of the camcorder. Try shooting from a different angle or adjusting  
the lighting conditions.  
94  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Bright, crystal-shaped spots appear in the LCD monitor and the  
viewfinder.  
Sunlight is directly entering the lens. This is not a defect of the camcorder.  
The rear of the LCD monitor is hot.  
The light used to illuminate the LCD monitor causes it to be hot. Close the LCD monitor  
to turn it off or set the Power switch to OFF, and let the unit cool down.  
Colored bright spots appear all over the LCD monitor or the viewfinder.  
The LCD monitor and the viewfinder are made with high-precision technology. However,  
black spots or bright spots of light (red, green or blue) may appear constantly on the LCD  
monitor or in the viewfinder. These spots are not recorded on the tape. This is not due to  
any defect of the unit.  
The icons and the picture color on the LCD monitor are not clear.  
This may occur when the surface or the edge of the LCD monitor is pressed.  
The LCD monitor, the viewfinder and the lens are dirty.  
Wipe them gently with soft cloth. Gently wipe the LCD monitor in a semicircle because  
wiping strongly spreads the stain and it won’t come out easily.  
An error number (i.e. E03) appears.  
Turn the camcorder’s power off, then disconnect the power source. After a few minutes,  
try turning the power on again.  
The image is out of focus.  
The eyepiece focus control needs to be adjusted (see page 29).  
The scene being shot is adversely affecting the operation of Auto Focus (see page 85).  
Even though the lens cap is detached, the LENS CAP warning icon  
(see page 31) blinks.  
The LENS CAP warning icon may blink when the camcorder is used in dark areas,  
regardless of whether the lens cap is attached or detached.  
Chapter 7  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Recording Problems  
Recording cannot be performed.  
Make sure the Erase Protection tab is in the position that allows recording. If not, slide  
the tab. Some tapes have removable tabs. If the tab has been removed, cover the hole  
with adhesive tape.  
If DSC is selected, it isn’t possible to record onto the tape. Press REFRESH for  
approximately 1 second to select VIDEO.  
Recording does not start.  
A
M
The camcorder Power Switch has not been set to or  
(see page 12).  
Animation or Time-Lapse is not available.  
Before recording in the Animation mode at the very beginning of a tape, set the  
camcorder to the Recording mode for about 5 seconds, so that the tape runs smoothly.  
Using the Fade-in function at this point is a good way to begin an animated program.  
Playback Problems  
The tape is running, but there is no playback picture.  
The TV has not been set to its VIDEO input channel.  
If Audio/Video connection is used, the TV’s VIDEO/TV switch has not been set to  
VIDEO.  
Playback cant be performed.  
If DSC is selected, it isn’t possible to play a tape. Press REFRESH for approximately 1  
second to select VIDEO.  
Playback picture is blurred or interrupted.  
The video heads are dirty or worn out. Consult your nearest RCA authorized service  
center for head cleaning or replacement.  
The tape stops during fast-forward or rewind.  
The Counter Memory Function has been activated (see page 49).  
96  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Rewinding or fast-forwarding cant be performed.  
The tape is already fully wound on one reel or the other.  
The picture is blurred in the Quick Review or Retake mode.  
This is normal while recording in the SLP mode. Some noise may be present while  
recording in the SP mode.  
The date and time displays disappear.  
If you remove the power source from the camcorder while the power is on, all settings  
and selections are erased. Make sure to turn the camcorder’s power off before  
disconnecting the power source.  
The wrong date and time are displayed/recorded.  
If you have not performed Date/Time Setting (see page 22), the date and time are not  
displayed/recorded correctly. Be sure that Date/Time setting is carried out.  
The tape wont eject.  
The battery pack is running low.  
If the LCD monitor is not open more than 60˚, the EJECT switch does not function.  
Chapter 7  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Digital Still Camera Problems  
Although SNAPSHOT is pressed, the snapshot isnt stored in the built-in  
memory.  
When the remaining picture number icon blinks 0, you must delete some pictures before  
you can store new ones (see page 69).  
It isnt possible to shoot in succession.  
It takes approximately 2 seconds to store a snapshot in memory. You’ll have to wait until  
the snapshot is stored before taking another picture.  
Although ALL is selected in the DELETE menu , all snapshots cant be  
deleted.  
The Protecting Images function is in effect for some snapshots. If they are not necessary,  
cancel the Protecting Images function, then try deleting all snapshots again (see pages 68-  
69).  
If images cannot be deleted, even after you have unprotected them, you may need to  
initialize the memory. This will erase all the images (including protected) (see page 70).  
There seems to be a problem with storing images in memory.  
Try to delete some of the images, then try to take a few more snapshots. If that doesn’t  
work, you may need to save any remaining images to a PC and initialize the memory.  
This will erase all the images (including protected) from memory (see page 70).  
Date/Time Insert isnt performed while shooting a snapshot.  
You can’t display the date/time on a snapshot.  
Instant Titles arent displayed while shooting a snapshot.  
You can’t display the Instant Titles on a snapshot.  
Some settings cant be changed in the DSC menu.  
You can’t set REC TIME and INT. TIME in the DSC menu.  
98  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Final Notes  
Power  
Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F).  
20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the  
environment is too cold, charging may be incomplete.  
Charging times are for a fully discharged battery pack.  
Charging time varies according to the ambient temperature and the status of the  
battery pack.  
To avoid interference with reception, do not use the AC power supply near a radio.  
Since the AC power supply processes electricity internally, it becomes warm during  
use. Be sure to use it only in well-ventilated areas.  
The following stops charging or discharging:  
A
M
Setting the Power switch to  
,
, or  
.
Disconnecting the AC power supply from the camcorder.  
Unplugging the AC power supply’s cord from the AC outlet.  
Detaching the battery from the camcorder.  
Date/Time Settings  
The date/time cannot be stored in memory if the built-in clock battery runs out.  
Consult an authorized RCA dealer for replacement, or set the date/time as necessary  
before you start shooting.  
Chapter 7  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Video Recording  
A
M
When the Power switch is set to or  
and the LCD monitor is opened at an angle  
of 25˚ or more, the LCD monitor switches on and the viewfinder switches off  
automatically to save power.  
The cassette tape holder can’t be opened unless a power supply is attached.  
There may be a delay after you slide EJECT until the cassette tape holder opens. Do  
not use force.  
The time required to calculate the remaining tape length, and the accuracy of the  
calculation, may vary according to the type of tape used.  
The tape remaining time icon is accurate only if the correct tape length has been  
selected (see page 26).  
TAPE END appears when the tape reaches its end, and the power goes off  
automatically if left in this condition for 5 minutes.  
TAPE END also appears when a tape whose tape is already at its end is loaded.  
If the Recording Start/Stop button is pressed after the Record-Standby mode has  
continued for over 5 minutes, recording may not start immediately.  
While shooting, sound is not heard from the speaker.  
TBC (Time Base Corrector)  
The TBC icon turns yellow (gray with a camcorder equipped with a black/white  
viewfinder) while TBC is working.  
TBC does not work during still playback and shuttle search.  
The TBC icon turns white while TBC is not operative.  
It may take a few seconds before TBC actually starts working.  
The picture may be distorted if the TBC mode is activated or deactivated at the edit-  
in/-out points or when normal playback resumes after still playback or shuttle  
search.  
If the playback picture is distorted when TBC is set to on, turn off TBC.  
100  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Tapes  
A power supply must be attached to load or eject a tape.  
When loading a tape, it takes a few seconds for the cassette tape holder open. Never  
apply force to the holder or door cover as this might result in damage to the  
camcorder and void the warranty.  
If the cassette tape holder does not open after a few seconds, close the holder door  
and try again. If it still does not open, turn the camcorder off, then on again.  
If the tape does not load properly, open the cassette tape holder door and fully  
remove the unit. Wait a few minutes and reinsert it.  
When the camcorder is suddenly moved from a cold environment to a warm  
environment, wait a short time before opening the cassette tape holder door.  
Closing the cassette tape holder door before the holder comes out may damage the  
camcorder.  
Even when the camcorder is turned off, a tape can still be loaded or unloaded. After  
the cassette tape holder is closed with the camcorder switched off, though, it may  
not recede. Turn the power on before loading or unloading tapes.  
When recording, once the cassette tape holder door is open, a blank portion will be  
recorded on the tape or a previously recorded scene will be taped over regardless of  
whether the tape holder came out or not.  
Chapter 7  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Care and Maintenance  
Care and Cleaning  
After Using the Camcorder  
1. Set the Power switch to OFF.  
2. Open the LCD monitor at least 60˚.  
3. Slide the EJECT switch to open the cassette tape holder, then remove the tape.  
4. Press the area marked CLOSE to close and lock the cassette tape holder.  
5. Close and lock the LCD monitor.  
6. Slide the BATTERY RELEASE switch and remove the battery pack.  
7. Reattach the lens cap.  
Cleaning The Camcorder  
1. Clean the exterior, wiping gently with a soft cloth. For heavy dirt, use diluted, mild  
soap and wring the cloth well. Then wipe again with a dry cloth.  
2. Open the LCD monitor and wipe it gently with a soft, dry cloth. Close it when done.  
3. To clean the lens, blow it with air using a blower brush. Wipe gently with lens  
cleaning paper.  
4. To clean the viewfinder, raise it to the vertical position. Turn the eyepiece  
counterclockwise and pull it out. Insert a lens blower or soft cloth into the gap to  
clean the interior. Reattach the eyepiece and turn it clockwise until it snaps into  
place.  
Notes:  
Avoid using strong cleaning agents such as alcohol.  
Cleaning should be done only after the power supply has been disconnected.  
Mold may form if the lens is left dirty.  
When using a cleaner or chemically treated cloth, refer to the cautions of each  
product.  
102  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Proper Care and Storage  
Keep dirt from entering the camcorder’s cassette tape door. Dust and grit are abrasive  
and cause excessive wear to both the recording/playback heads and tapes.  
Always cap the lens when the camcorder is not in use.  
Before handling the camcorder, make sure your hands and face are free from any  
chemical products such as suntan lotion, as it might damage the finish.  
The camcorder might be damaged by improper storage or handling. Do not subject the  
camcorder to swinging, shaking, or dropping.  
Do not store the camcorder in temperatures below -22˚F (-30˚C) or above 149˚F (65˚C).  
When the camcorder is not in use, always remove the tape and AC power supply/  
charger or battery.  
Retain the original carton for future storage or shipping purposes.  
Chapter 7  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Tape Care and Storage  
When finished with a tape, rewind it, remove it from the camcorder, and label it.  
Protect the tape using the erase protection tab if necessary.  
Store tapes vertically in their protective cases at normal room temperatures. Never  
leave the camcorder or tapes in a car or outdoors for an extended period of time.  
Excessive heat or cold might damage tapes.  
Keep tapes away from strong magnetic fields such as electric motors, speakers and  
other devices.  
Keep dust from entering the cassette tape compartment. All dust is abrasive and  
causes excessive wear on the tape and the camcorder’s recording and playback  
heads.  
Never use tapes with damaged or spliced tape.  
Do not use a tape if it has been damaged or exposed to moisture. The tape might  
jam and/or damage the camcorder.  
CD-ROM Care  
Take care not to soil or scratch the mirror surface (opposite to the printed surface).  
Do not write anything or put a sticker on either the front or back surface. If the CD-  
ROM gets dirty, gently wipe it with a soft cloth outward from the center hole using a  
circular motion.  
Do not use conventional disc cleaners or cleaning spray.  
Do not bend the CD-ROM or touch its mirror surface.  
Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from  
direct sunlight.  
104  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Things to Avoid  
Do not attempt to disassemble the camcorder. There are no user-serviceable parts  
inside.  
Avoid operating the camcorder immediately after moving it from a cold location to a  
warm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperature  
before inserting a tape.  
In cold to warm conditions, condensation might occur causing the tape to stick to the  
recording heads and damage the camcorder or tapes.  
Never aim the camcorder at the sun or other bright objects.  
Do not leave the camcorder in direct sunlight for extended periods of time. The  
resulting heat buildup might permanently damage the camcorder’s internal parts or  
reduce the life of the clock battery.  
Do not operate the camcorder in extremely humid environments.  
Do not operate the camcorder near the ocean as salt water or spray might damage the  
internal parts of the camcorder.  
Do not operate the camcorder for extended periods in temperatures below 40˚F (4˚C)  
or above 95˚F (35˚C).  
Do not expose the camcorder or power supply/charger to rain or moisture. If any  
component becomes wet, turn off the power and take the unit to an authorized RCA  
camcorder service provider.  
Do not use an power supply/charger or batteries other than the ones specified for the  
camcorder. Using the wrong accessories might cause damage to the camcorder.  
Chapter 7  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Traveling Tips  
Write down your camcorder’s serial number and keep it separate from the camcorder  
when traveling. If your camcorder is lost or stolen, you will be able to identify it.  
Use extra care to avoid damage to your camcorder and accessories when operating  
them at a beach or pool. Spray, sand, and dust should be avoided. If your lens has  
been exposed to the elements, clean it only with proper lens cleaning supplies.  
Make sure you have any plug adapters that you might need before taking your  
camcorder to other countries. Consult your dealer for advice.  
Carry your camcorder in a carrying case when traveling. See the accessories section  
(page 116) for a case designed especially for this camcorder. An ordinary suitcase or  
carry bag does not offer the protection your camcorder needs. Treat your camcorder  
as carry-on luggage to protect it from rough handling.  
106  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Specifications  
Specifications  
Operating temperature  
0°C to 40°C (32°F to 104°F)  
Operating humidity  
35% to 80%  
Camcorder  
Storage temperature  
Format  
–20°C to 50°C (–4°F to 122°F)  
S-VHS*/VHS NTSC standard  
Weight  
Approx. 900 g (2.0 lbs)  
Power source  
DC 11 V  
supply)  
(Using AC power  
Dimensions (W x H x D)  
206 mm x 112 mm x 118 mm (8-1/8" x 4-7/16"  
x 4-11/16") (with the LCD monitor closed and  
with the viewfinder fully tilted downward)  
DC 6 V  
(Using battery pack)  
Power consumption  
Viewfinder on:  
4.7 W (CC6384)  
4.4 W (CC6394)  
Pickup  
1/4" format CCD  
Lens  
F1.6, f = 3.9 mm to 62.4 mm, 16:1 power  
zoom lens with auto iris and macro control,  
filter diameter 40.5 mm  
LCD monitor on:  
5.2 W (CC6384)  
5.4 W (CC6394)  
Viewfinder  
CC6384: Electronic viewfinder with .5” black  
and white CRT.  
Video light: 3.0 W  
Signal system  
NTSC-type  
CC6394: Electronic viewfinder with 0.44" color  
LCD  
Video recording system  
Luminance: FM recording  
Color: Converted sub-carrier direct  
recording conforms to VHS standard  
Cassette tape  
White balance adjustment  
Auto/Manual adjustment  
LCD monitor system  
CC6384: 2.5" diagonally measured, LCD  
panel/TFT active matrix  
S-VHSC/VHS-C cassette tape  
Tape speed  
SP: 33.35 mm/sec. (1-5/16 ips)  
SLP: 11.12 mm/sec. (7/16 ips)  
CC6394: 3" diagonally measured, LCD panel/  
TFT active matrix  
Recording time (max.)  
SP: 40 minutes  
SLP: 120 minutes (with TC-40)  
Speaker  
Monaural  
D.S.C. format  
Recording format: Digital data  
storage (based on JPEG)  
Recording medium: Built-in flash  
memory, 2 Mbyte  
Audio/Video Jacks  
Video  
1 V (p-p), 75 unbalanced, analog output  
(via Video output connector)  
Number of storable shots  
FINE mode: approx. 30 shots  
STANDARD mode: approx. 60 shots  
Image size: 640 x 480 pixels (when  
captured on a PC)  
Audio  
300 mV (rms), 1 kanalog output (via Audio  
output connector)  
* CC6394 only  
(continued on the next page)  
Chapter 7  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Digital  
ø2.5 mm, 4-pole, mini-head jack  
S-Video*  
Y : 1 V (p-p), 75 , analog output C : 0.29 V (p-p),  
75 , analog output  
AC Power Supply  
Power requirement  
U.S.A. and Canada: AC 120 V, 60 Hz  
Other countries: AC 110 V to 240 V‘, 50 Hz/60 Hz  
Output  
DC 11 V , 1 A  
Dimensions (W x H x D)  
59 mm x 31 mm x 69 mm (2-3/8" x 1-1/4" x 2-3/4")  
Weight  
Approx. 130 g (0.29 lbs)  
* CC6394 only  
108  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
CCuustosmteormAsseisrtanAcesasnidsStearvniccee and Service  
Customer Assistance and Service  
You can reach Thomson at the following number:  
800-283-6503  
(Toll free inside U.S.A.)  
Our toll-free camcorder number operates from 8 a.m. to 5 p.m. CST Monday – Friday for  
U.S. customers only  
Thomson provides a toll-free telephone number to help with any problems  
encountered with the camcorder. Many problems can be diagnosed over the  
phone, but, if necessary, repair or replacement will be arranged. For faster  
service, have the camcorder’s model/serial number and date of purchase ready  
when you call. If your unit is out of warranty, we will quote the cost of a repair  
or replacement unit to you.  
Returning equipment to Thomson for repair or exchange  
If we are unable to resolve your problem over the phone, we will gladly service  
your unit or exchange it for a new or refurbished camcorder. Refer to the limited  
warranty on the reverse side to learn about your specific rights and  
responsibilities.  
Always consult Thomson and get a Service Request number before returning  
anything! Obtain a Service Request (SR) number from the telephone  
representative before returning your equipment to avoid delays, accounting  
errors, or even loss of your unit.  
Chapter 7  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Important information to customers who ship defective  
equipment to Thomson Consumer Electronics  
The Thomson representative who authorized the return of your equipment will  
give you an SR number over the phone. They will also provide you with  
instructions on where and how to return your camcorder. Write the number in  
large, clear characters on the outside of the box. To avoid confusion and  
misunderstandings, shipments without an SR number clearly visible on the  
outside of the box will be returned to you at your expense.  
Include a brief note describing the problem and any conversations about the  
problem you have had with Thomson personnel.  
Include your name, address and model/serial number of the camcorder. These  
numbers are located on the bottom of the camcorder.  
If the camcorder is within the warranty period, please provide a copy of the bill  
of sale to verify purchase date. Use the original box and packing material to  
protect the equipment from damage in shipment.  
For your protection, insure all shipments for full replacement value and use a  
reliable shipper. Thomson assumes no responsibility for warranty shipments from  
the customer to the factory if not shipped in the manner prescribed  
by Thomson.  
110  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Limited Warranty  
Limited Warranty  
What your warranty covers:  
Any defect in materials or workmanship.  
For how long after your purchase:  
90 days for labor charges.  
One year for parts.  
The warranty period for rental units begins with the first rental or 45 days from date of  
shipment to the rental firm, whichever comes first.  
What we will do:  
During the initial 90 days  
Exchange your camcorder with a new or refurbished unit, or repair your camcorder.  
The option will be ours. There will be no cost to you.  
After the 90 days and within one year  
Exchange your camcorder with a new or refurbished unit, or repair your camcorder.  
The option will be ours. Parts will be provided at no charge, but you will be  
responsible for the cost of labor required for the repair.  
How you get service:  
Call 1-800-283-6503 and have your unit’s date of purchase and model/serial number  
ready. The model/serial number information is on the bottom of your camcorder.  
A representative will troubleshoot your problem over the phone. If the representative  
determines that you should receive a replacement unit, you will be provided with a  
Service Request (SR) number and the location of a nearby exchange point if one  
exists. No returns will be accepted without the SR number.  
Chapter 7  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
To receive a replacement Camcorder before you return yours:  
Option I  
1. Provide your Discover, MasterCard, or Visa account number and expiration date to  
our phone representative. This is for security purposes. If we receive your unit,  
excluding all accessories, within 14 days from the date you were provided the SR  
number, only items not covered by warranty will be charged to your account. IF  
YOUR UNIT IS NOT RECEIVED WITHIN 14 DAYS, THE SUGGESTED RETAIL  
VALUE OF THE CAMCORDER WILL BE CHARGED TO YOUR CREDIT CARD. This  
amount, less $10.00 handling, will be credited if the unit is subsequently received.  
2. We will send you a replacement unit.  
3. Ship the unit back to us, excluding all accessories, using the replacement unit’s  
carton. Shipping instructions will be included in the carton along with your SR  
number which will allow you to easily ship the unit back to us. Make sure you  
insure your shipment in case of damage or loss. Include with the shipment:  
Evidence of purchase date, such as a bill of sale to verify your unit’s warranty  
eligibility.  
A brief note describing your camcorder’s problem.  
Your name, address and phone number.  
Return transportation, storage, handling, and insurance costs are your sole responsibility.  
We accept no liability in case of damage or loss.  
Option II  
1. For a fee of $10.00, we will send a replacement unit to the exchange point.  
2. The exchange location will notify you of its arrival.  
3. Take your unit, excluding all accessories, and your evidence of purchase date, such  
as a bill of sale, to the exchange location and you will be provided the new or  
refurbished unit.  
4. If the repairs were covered by your warranty, you will not be billed.  
To receive a replacement unit after we have received your unit:  
1. Write the SR number on the outside of the carton used to return the unit.  
Make sure you insure your shipment in case of damage or loss.  
2. Carefully pack the unit, excluding all accessories, using the original box and packing  
material if possible.  
3. Include with the shipment:  
Evidence of purchase date, such as a bill of sale, to verify your unit’s warranty  
eligibility.  
112  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
A brief note describing your camcorder’s problem.  
Your name, address and phone number.  
Return transportation, storage, handling, and insurance costs are your sole responsibility.  
We accept no liability in case of damage or loss.  
4. The representative will advise the address to mail a cashier’s check or money order  
for payment if there are any out of warranty labor or parts charges and you elect not  
to use your credit card.  
5. Upon receipt of your product, a new or refurbished unit will be shipped to you.  
To have your Camcorder repaired by an Authorized RCA Camcorder  
Service Center:  
Check with your dealer or call 1-800-336-1900 for the Authorized RCA Camcorder  
Service Center nearest you.  
Take your unit to the Authorized RCA Camcorder Service Center of your choice.  
Show the Authorized RCA Camcorder Service Center representative evidence of  
purchase date, such as a bill of sale.  
Pick up your camcorder when repairs are complete.  
What your warranty does not cover:  
Adjustment of customer controls.  
Damage from misuse or neglect.  
A unit that has been modified or incorporated into other products or is used for  
institutional or other commercial purposes.  
Batteries for remote control and clock.  
Cleaning of video/audio heads.  
Camcorders purchased or serviced outside the U.S.A.  
Return transportation, storage and handling costs of your unit, including insurance  
for loss or damage.  
Acts of nature, such as but not limited to lightning damage.  
Product Registration:  
Please complete and mail the Product Registration Card packed with your camcorder.  
It will make it easier to contact you should it ever be necessary. The return of the  
card is not required for warranty coverage.  
Chapter 7  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
How State Law relates to warranty:  
This warranty gives you specific legal rights and you also may have other rights that  
vary from state to state.  
If you purchased your camcorder outside the United States:  
This warranty does not apply. Contact your dealer for warranty information.  
Service calls that do not involve defective materials or workmanship are  
not covered by this warranty. Costs of such calls are the sole responsibility  
of the purchaser.  
114  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
FCC Declaration of Conformity and Industry Canada  
Information  
FCC Regulations state that unauthorized changes or modifications to this equipment may  
void the user’s authority to operate it.  
This device complies with part 15 of FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) This device  
must accept any interference received, including interference that may cause undesired  
operation.  
This Class B digital apparatus complies with the Canadian ICES-003.  
Cet appareil numérique de la Classe B est conforme a la norme NMB-003 du Canada.  
This equipment has been type tested and found to comply with the limits for a Class B  
Digital Device in accordance with the specifications in Part 15 of the FCC rules. These  
rules are designed to provide reasonable protections against radio and television  
interference in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation.  
If this equipment does cause interference to radio or television reception (which you can  
determine by turning the equipment off and on), try to correct the interference by one  
or more of the following measures:  
Reorient or relocate the receiving antenna (that is, the antenna for the radio or television  
that is “receiving” the interference).  
Change the position of the Camcorder with respect to the radio or television equipment  
that is receiving interference.  
Move the Camcorder away from the equipment that is receiving interference.  
Plug the Camcorder into a different wall outlet so that the Camcorder and the equipment  
receiving interference are on different branch circuits.  
If these measures do not eliminate the interference, please consult your dealer or an  
experienced radio/television technician for additional suggestions. Also, the Federal  
Communications Commission has prepared a helpful booklet, “How To Identify and  
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S.  
Government Printing Office, Washington D.C. 20402. Please specify stock number 004-  
000-00345-4 when ordering copies.  
For more information on FCC conformity: Thomson Consumer Electronics, Inc.,  
10330 N. Meridian St., Indianapolis IN 46290; 1-800-587-5850.  
Chapter 7  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Optional Accessories  
We invite you to take a look at some great ideas for sparking creativity and adding to the  
fun of using your camcorder. The following pages have a selection of accessories to help  
make your memorable moments look and sound even better.  
These accessories are designed to make the process of recording and watching your  
videos more enjoyable.  
To order accessories, contact your local Dealer.  
If a dealer is not nearby, all accessories are available through toll-free ordering or by  
using the order form found on page 119.  
AC201A Soft Carrying Case  
Custom compact soft case designed especially to  
provide protection and utility for your camcorder and  
most accessories. Rugged fabric lined with soft  
nonabrasive material and generous padding. Has  
three outside pockets with storage for lens filters,  
adapters, batteries, and tapes.  
ACS091 Shoulder Strap  
Designed to replace the shoulder strap that came  
with your camcorder.  
244265 (for CC6384) or 244427  
(FB1260) (for CC6394) Rechargeable  
Battery Pack  
Replacement battery for the one that came with your  
camcorder.  
All specifications and descriptions of accessories are subject to change without notice.  
116  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
VH83 A/V Cable  
Used to attach the camcorder to an external component like a TV or VCR.  
Using the Optional AC088 Tripod  
Mounting the camcorder on a tripod, such as AC088, keeps the camcorder steady and  
produces excellent video results.  
This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick-release  
mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section  
leg design folds down to 26" when not in use. Rubber feet allow for sure footing.  
Cautions:  
Before using a tripod, make sure it is stable  
enough to hold the camcorder without  
falling over. Do not transport the  
camcorder attached to the tripod.  
When attaching your camcorder to a  
tripod, be careful not to force the tripod  
screw into the camcorders tripod  
mounting hole.  
The tripod screw should not protrude into  
the camcorder more than approximately  
three-eighths (3/8) of an inch. Forcing the  
screw could damage the mounting hole on  
the bottom of the camcorder.  
Chapter 7  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
To order accessories, contact your local Dealer.  
If a dealer is not nearby, you can also follow the directions below to order by telephone  
or direct-by-mail.  
United States and Canada Orders  
To place your order by phone, have your Visa, MasterCard, or Discover card ready and  
call the toll-free number listed below.  
Use this number only to place an order for accessory items listed on this  
order form.  
1-800-338-0376  
To place your order by mail, detach and mail the completed order form with credit card  
information, money order, or check in U.S. currency (made payable to Thomson  
Consumer Electronics, Inc.) to the following address:  
Video Accessories  
PO Box 8419  
Ronks, PA 17573  
118  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Accessories Order Form  
Description  
Part No.  
Price  
$ 49.95  
$ 34.95  
$ 12.95  
$ 59.99  
Qty.  
Total  
Super Lightweight Tripod  
Soft Camcorder Case  
Shoulder Strap  
AC088  
AC201A  
ACS091  
244265  
Rechargeable Battery (2 hour)  
(for CC6384)  
Rechargeable Battery (1 hour)  
(for CC6394)  
244427  
$ 49.95  
A/V Cable  
VH83  
$ 5.95  
Extended Life Battery  
BB99L  
$ 69.99  
All prices subject to change without notice.  
Total Merchandise  
$_________  
$_________  
Sales Tax  
We are required by law to collect the  
appropriate sales tax for each individual  
state, county, and locality to which the  
merchandise is being sent.  
5.00  
Shipping and Handling  
$_________  
$_________  
Total Amount Enclosed  
Use VISA, MasterCard, or Discover.  
Money order or check must be in U.S.  
currency only. No COD or cash.  
Please complete other side also  
Chapter 7  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Charge your order on your VISA,MasterCard,  
or Discover Card by filling in below  
USE YOUR CREDIT CARD  
IMPORTANT: Copy complete account number from your VISA card  
¤
Expiration date:  
IMPORTANT: Copy complete account number from your MasterCard  
s
r
r
TM  
Expiration date:  
Copy Number above your name on MasterCard  
IMPORTANT:  
Copy complete account number from your Discover Card  
Expiration date:  
AUTHORIZED SIGNATURE  
Prices are subject to change without notice.  
A complete and correct order will  
save you days of waiting.  
Print or type your name and  
address clearly.  
Name:  
Street:  
Apt:  
Zip:  
City:  
State:  
Please make sure that both sides of this form have been filled out completely.  
Allow 4 weeks for delivery.  
All accessories are subject to availability.  
120  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This Page Left Blank Intentionally  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Index  
A
D
A (audio) and V (video) jacks 54  
Accessories 116  
Date and time  
setting 22  
order form 119  
Date/time insert 89  
Deleting all images 71  
Deleting Images 69  
Deleting select images 69  
Digital and optical zoom 40  
Digital effects 83  
Digital still camera recording and  
playback 58  
Digital zoom 41  
Additional notes about S-VHS and  
S-VHS ET Cassette 24  
Advanced features 80  
Animation 91  
Animation and Time-Lapse  
recording icons 35  
Area marked close 13  
Audio/video input jacks 54  
Auto Focus 85  
E
Automatic Recording  
AutoShot 12  
Exposure control 84  
Exposure icons 34  
Eyepiece focus control 29  
B
Basic playback 46  
Battery  
care and storage 19  
life 19  
F
Fade and wipe icons 34  
Fade/wipe effects 80  
FCC declaration of conformity 115  
Final notes 99  
Bright and volume icons 34  
Buttons and controls 7  
Focus icons 35  
Focusing 85  
C
Cassette  
adapter 51  
Cassettes  
G
Getting started 9  
care and storage 101  
record protection tab 13  
Charge marker 17  
Charging the battery 16  
Choose your connection 51  
Cleaning 102  
H
Handstrap  
adjusting 10  
Clock adjustment 22  
Connecting to a TV (or VCR) with  
A/V inputs 54  
Connecting to a Windows® PC 73  
Counter memory 49  
Customer assistance and  
service 109  
I
Important information 2  
Index 65  
Index number 65  
122  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Index playback 66  
Playback  
basic 46  
normal 64  
still 49  
using cassette adapter 51  
Playback on a TV (or VCR) with  
A/V inputs 55  
Playback options 46  
Plug adapter 20  
Industry Canada information 115  
Initializing the built-in memory 70  
Insert a cassette tape 13  
Instant titles 90  
J
Journalistic shooting 38  
Power supply 20  
attaching 11  
L
POWER switch 55  
Power zoom lever  
volume control 47  
Powering the camcorder 12, 16  
Preset titles 33  
Product registration 2  
Program AE with special  
effects 82  
LCD monitor 14, 28  
LCD monitor brightness  
adjusting 47  
Lens cap  
attaching 10  
Limited warranty 111  
M
Protect icon 66  
Manual focus 86  
Protecting images 67  
Manual white balance 88  
Manual White balance icons 33  
Menu definitions 77  
MENU/BRIGHT dial 14  
Menus 76  
Q
Quick review 39, 63  
R
O
Record protection tab 13  
Recording  
icon 15, 38  
playing back 15  
Recording and playback icons 31  
Recording format  
On-screen icons 30  
Optical zoom 40  
Order form 119  
Other icons 35  
setting 23  
P
Recording tips 44  
Refreshing the battery 18  
Removing the battery 18  
Removing the power supply 20  
Retake 39  
Parts checklist 6  
Picture mode 65  
Picture quality  
setting 59  
Picture quality icon 36  
Chapter 7  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
S
T
S-video and audio connection 54  
Seeing what you are recording 28  
Selected image 66  
Self-recording 39  
Service 109  
Shoulder strap 6, 21  
Shuttle search 50  
Slide show 65  
Tape care and storage 104  
Tape dubbing 56  
Tape length  
setting 26  
Tape length icon 35  
Tape recording speed  
setting 25  
Tape speed icon 35  
TBC (Time Base Corrector) 48  
TBC (Time Base Corrector)  
icon 36  
Snapshot icon 36  
Snapshot mode  
selecting 60  
Snapshots  
taking 62  
Time counter icon 36  
Time-Lapse 92  
Speaker volume 47  
Specifications 107  
Start recording 15  
Status icons 33  
Time-remaining icon 36  
Tips  
traveling 105  
Title menu 33  
Steady Pix icon 35  
Steady Pix™ 41  
Tracking  
adjusting 48  
Still playback 49  
STOP button 55  
System requirements for Picture  
Navigator 72  
Tracking icons 33  
Traveling tips 106  
Troubleshooting 94  
Turning off the camcorder 16  
124  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
U
Unprotecting images 68  
V
Video light 12, 42  
Video light details 42  
Viewfinder 14  
W
W and T (zoom lever) 40  
Warning icons 30  
Warranty 111  
White balance adjustment 87  
Wipes 81  
Z
Zoom level icon 34  
Zoom lever 34, 40  
Zooming  
digital 40  
optical 40  
zoom lever 40  
Chapter 7  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please do not send any products to the Indianapolis address listed in this manual or  
on the carton. This will only add delays in service for your product.  
10330 North Meridian Street  
Indianapolis, IN 46290  
©2001 Thomson Consumer Electronics, Inc.  
Trademark(s)® Registered  
Marca(s) Registrada(s)  
Printed in Japan  
TOCOM 1571624B  
Part No. LYT0730-001A(VP)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio TV Mount PSWLE58 User Guide
Radio Shack Universal Remote 15 133 User Guide
Renesas Laptop 6NM User Guide
Robic Fitness Electronics SC 606W User Guide
Rockford Fosgate Car Speaker ND4 XFM User Guide
Roland Electronic Keyboard DP 900 User Guide
Samsung CRT Television WS28V53NS8XXEC User Guide
Samsung Flat Panel Television 460TSn User Guide
Samsung Security Camera SCC B5344 User Guide
Samsung Vacuum Cleaner VCR8845 User Guide