CC6 3 8 / 6 3 9
USER‘S
GUIDE
C A M C O R D E R
Download from Www.Somanuals.com. All Manuals Search And Download.
Assistance
We want to make sure you enjoy your new camcorder. If you have any
questions, call:
Camcorder Exchange Warranty..........800-283-6503 (pages 106-107)
Customer Service.........................................800-336-1900 (page 105)
Accessories.............................................800-338-0376 (pages 92-97)
Table of Contents
Remote Controls
Safety Information ..............................i
Product Registration...........................i
Table of Contents ............................1-2
• Model CC639
• Install Battery Cell .......................17
• Remote Sensor..............................17
• Buttons ....................................18-19
• Model CC638
First-Time Operation
• Assistance..........................................3
• Unpack Camcorder &
• Buttons ....................................20-21
• Install Battery Cell .......................22
• Remote Sensor..............................22
Accessories......................................3
• Attach the Adapter/Charger...............4
• Insert a Tape ......................................4
• Adjust Handstrap...............................5
• Open Lens Cover...............................5
• Turn on Camcorder............................5
• Select a Recording Speed ..................6
• Set the Mode Select Dial ...................7
• Adjust Viewfinder and
Recording Tips..................................23
Video Cassettes............................24-25
Recording
• Making a Recording...................26-27
• LCD Panel .......................................28
• Viewfinder.......................................29
• Viewfinder Displays...................30-33
• Flying Erase Head ...........................34
• Auto Head Cleaner ..........................34
• Tally Light.......................................34
• Microphone......................................34
• External Microphone Jack...............34
• Quick Review ..................................35
• Camera Edit.....................................35
Mode Select Dial
Eyepiece Focus Control...................7
• Start and Stop Recording...................8
• Play Back Your Recording................8
• Turn off the Camcorder.....................8
• Close Lens Cover ..............................8
• Review Camcorder’s
Operating Controls.....................9-11
Powering Your Camcorder
• Using Adapter/Charger....................12
• Using Rechargeable Battery.......13-15
• Using Optional Car Cord Adapter...16
• Full AUTO Mode..........................36
• Exposure Control..........................37
• Focusing (Auto and Manual) ..38-39
(continued on next page)
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Table of Contents
Recording (continued)
Playback
• Snapshot Feature ........................40-41
• Electronic Image Stabilizer (EIS)....42
• Auto Pause Feature..........................43
• Electronic Indexing .........................43
• White Balance ............................44-45
• Recording Menu
• Using the Cassette Adapter ........78-79
• Viewfinder Playback ......................80
• Playback Features
• Visual Searching ...........................81
• Tape Positioning ...........................81
• Stop-Action Pause.........................81
• Time Counter ................................82
• Tracking ........................................83
• To Display Recording Menu.........46
• Tape Remaining Display...............47
• Set Tape Length.........................47
• Zooming...................................48-49
• Gain Up (Slow Shutter).................50
• Color Filter....................................51
• Titler ........................................52-53
• Date and Time Display
• Playback on TV (or VCR) With
AUDIO/VIDEO IN Jacks .....84-85
• Model CC639 Only
• Programming Remote to Operate
Compatible VCR ..................86-87
• Copying Tapes Using Program-
mable Synchro Edit ..............88-89
• Set the Date and Time ...............54
• Install the Clock Lithium Cell ...55
• Playback on TV Without
Audio/Video Inputs...............90-91
• Select Date or Date and Time
You Want to Record ........56-57
Optional Accessories...................92-97
• Sub Menu
• Accessory Order Form ...............95-97
• Change a Feature In the
Trouble Checks .........................98-101
Care and Maintenance ...........102-103
Information to User........................104
Customer Assistance and Service .105
Limited Warranty...................106-107
Specifications ..................................108
Index (Alphabetical) ...............109-113
Sub Menu...............................58
• Tally Light .................................59
• Set JLIP Identification Number.59
• Self Timer.............................60-61
• Animation Recording ...........62-63
• Time-Lapse Recording .........64-65
• Fading or Wiping In or Out........66-67
• Production Effects......................68-69
• Audio Dubbing (Remote Only)..70-71
• Edit Insert (Remote Only)..........72-73
• Built-in Color Enhancement
Light .......................................74-75
• Attaching the Shoulder Strap...........76
• Traveling Tips .................................77
2
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
This section describes only the basic steps necessary to set up your camcorder to
record. Refer to the other sections for detailed operation and feature options.
Assistance
The toll-free numbers are available to help you with any problem you may encounter.
Camcorder Exchange Warranty . . . . .800-283-6503
Customer Service . . . . . . . . . . . . . . . .800-336-1900
Accessories . . . . . . . . . . . . . . . . . . . .800-338-0376
1. Unpack the camcorder and accessories.
• Save the packing materials and box in case you ever need to ship or store your
camcorder.
• The items shown below are packed with your camcorder. If any are missing or
appear damaged, contact your dealer immediately.
WARNING:
NICKEL CADMIUM
A
U
T
O
H
S
U
B
A
C
K
L
IG
H
T
P
ME
N
U
BATTERY MUST BE
RECYCLED OR
DISPOSED OF
F
R
O
N
T
L
IG
H
T
MA
N
U
A
L
16X9
A
E MOD
ES
EIS
P
E
H
F
O
T
O
F
E
C
TS
D
A
T
E
/
F
A
W
D
E
IP
T
IME
E
PROPERLY.
Cassette Adapter
Part No. 232845
Model CC638 or CC639*
*Your camcorder may look slightly different
from the one shown in this manual.
Rechargeable 6-Volt Battery
Part No. FB1260
Caution: Do not use
+
this adapter/charger
for any purpose other
than charging the
FB1260 or FB120
battery pack or
P
O
W
ER
C
H
G
E
N
D
R
E
F
R
E
S
H
Cassette Adapter
Battery
(Size "AA" 1.5 Volt)
Shoulder Strap
Part No. ACS091
AC Adapter/Charger
Part No. 221400
and DC Cable
supplying power to
the camcorder.
Remote Control
START/STOP
Part No. 233087
SNAP
SHOT
START
/STOP
ZOOM
SELF
INT.
TIME
VISS
TIME LAPSE
PLAY
STOP
REW
T
REC
TIME
TIME LAPSE
ZOOM
ANIM.
SELF
MBR
SET
REC
INT.
ANIM.
PAUSE
W
TIME
TIME
REW
F
FWD
VCR
A.DUB
– OR –
Model CC639 Only:
FF
PLAY
PAUSE
STOP
INSERT
INSERT
A.DUB
CANCEL REC/PAUSE
IN
ON
OUT
OFF
Edit Cable
RANDOM ASSEMBLY EDIT
Part No. 233088
Model CC639
Model CC638
Part No. 221337
Part No. 221125
Cautions: Lithium cell batteries. Must be disposed of properly. Never
handle punctured or leaking cells. May cause burns or personal injury.
Keep out of the hands of children. Can cause death or injury if swallowed.
If swallowed, consult a physician immediately for emergency treatment.
The lithium cells used in these devices may explode resulting in a fire or
chemical burn if mistreated. Do not recharge, disassemble, heat above
212˚F (100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the +
and – sides of the cell.
Clock and Remote Cells
3-Volt Micro Lithium Cells
– such as CR2025 – available
from most local drug stores
and camera shops. Use of
other cells present a risk of
fire or explosion.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
To AC 100-
240V, 50/60 Hz
Adapter/Charger
POWER
CHG
END REFRESH
POWER
Indicator
DC OUT Jack
VCR
POWER
OFF
CAMERA
AUDIO
RF
VIDEO
DC Cable
2. Attach the adapter/charger.
3. Insert a tape.
• Slide EJECT.
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
A. Connect one end of the DC cable to
the DC OUT jack on the
• Turn the tape wheel on the cassette
to remove any slack from the tape.
• Insert the cassette with the tape
wheel facing up and the tape window
facing out.
adapter/charger.
• Press on the area labeled PUSH until
B. Connect the other end of the DC
cable to the DC in jack on the
camcorder as shown above.
the cassette door locks into place.
C. Plug the adapter/charger’s plug into
an operating outlet. The adapter/
charger’s POWER indicator will
light
4
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
EJECT Button
EJECT
Tape Wheel
LENS
COVER
Control
OFF
ON
H
S
U
P
PAUSE
OFF
AUT
ON
LIGHT
PUSH
Here to
Close
SNAP
SHOT
SP•SLP
ER R/M
W.BAL.
TRACKING
+
L
PLAY/PAUSE
STOP
FF
REW
–
+
B
C
Tape Window
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
Handstrap Flap
POWER Switch and
Indicator
Handstrap Velcro Strip
(Under Flap)
• The power indicator will light and
the camcorder will enter record
4. Adjust the handstrap to fit
your hand.
PAUSE
pause.
appears in the
• Lift the flap on the handstrap and
separate the velcro strip.
viewfinder when the camcorder is in
record pause.
• Insert your hand, adjust the strap to
fit snugly, refasten the strap, and
close the flap.
• The position of this switch tells the
camcorder whether you want to
record (CAMERA), turn the power
off (OFF), or play back tapes (VCR).
5. Slide LENS COVER control to
• The camcorder will automatically
turn off if it remains in record pause
for five minutes without performing
zoom or other operations. Place
POWER in OFF and then back in
CAMERA.
open lens cover.
6. Place POWER (CAMERA/
OFF/VCR) switch in
CAMERA.
(continued on next page)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
SP•SLP Switch
SNAP
SHOT
SP•SLP
ER R/M
TRACKING
+
L
PLAY/PAUSE
W.BAL.
STOP
FF
REW
–
+
B
C
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
7. Select a recording speed.
Note: The length of the tape you are using
must be selected in the recording menu for the
camcorder to correctly calculate the recording
time remaining on the tape. Details are on
page 47.
Repeatedly press the SP•SLP switch to
select a recording speed. The
indicator for the speed selected
appears in the viewfinder and LCD
panel.
Select SP or SLP recording speed.
• SP – Standard play provides the best
picture, but the shortest recording
time (20 minutes with a TC-20 tape).
• SLP – Extended play provides three
times the recording time as SP
(60 minutes with a TC-20 tape).
SLP has slightly more picture noise
in normal playback.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
Electronic Viewfinder
Eyepiece Focus Control
AUTO
H
S
U
BACKLIGHT
P
MENU
16X9
MANUAL
FRONTLGHT
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
Mode
Select
Dial
8. Set the mode select dial to
AUTO.
9. Adjust the viewfinder and
eyepiece focus control.
• Pull out and rotate the viewfinder
into a comfortable operating
position.
• This places the camcorder in the full
AUTO mode.
• In the AUTO mode, the focus,
exposure, and white balance are
automatically controlled by the
camcorder.
• Turn the eyepiece focus control to
adjust the focus of the viewfinder for
your vision.
• Many of the special effects do not
operate in the AUTO mode. Details
on page 36.
(continued on next page)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
REW Button
STOP Button
SNAP
SHOT
SP•SLP
ER R/M
W.BAL.
TRACKING
+
L
PLAY/PAUSE
STOP
FF
PLAY/PAUSE
Button
REW
–
+
B
C
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
Thumb Trigger
POWER (VCR/OFF/CAMERA) Switch
Power Indicator
10. Start and stop recording.
11. Play back what you have
recorded.
• Place the POWER switch in VCR.
• Press and release the thumb trigger
to start recording. REC
appears in the viewfinder, and the
tally light will light when the
camcorder is recording.
• Press REW to rewind the tape.
• Press PLAY/PAUSE to play back
the tape in the viewfinder.
• Press and release the thumb trigger
again to stop recording. The
camcorder is now in the record-
PAUSE
• Press STOP when you are finished
playing back the tape.
• Details on viewfinder playback are
on page 80.
pause mode (
appears in
the viewfinder).
12. Place the POWER switch in
OFF to turn off the camcorder.
The power indicator will turn off.
13. Close the lens cover.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
14. Review camcorder’s operating controls.
Power Zoom Lever
“W” - Wide Angle
“T” - Telephoto
Viewfinder
Microphone
Built-in Color
Enhancement Light
Eyepiece Focus Control
Eyepiece
Lens
EJECT Button
FOCUS Buttons
LENS COVER
(Also FRONTLIGHT
and BACKLIGHT)
Control
AUTO
H
S
Cassette Door
U
BACKLIGHT
P
PUSH here to close.
MENU
16X9
MANUAL
FRONTLIGHT
AUTO PAUSE
ON•OFF Switch
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
LIGHT
FADE
WIPE
OFF•AUTO•
ON Switch
MIC Jack
Mode Select Dial
PHOTO
EFFECTS
Button
LCD
Panel
Remote
Control
Sensor
DATE/TIME Button
FADE/WIPE
Button
Tally Light
EIS Button
16X9/AE MODES Button
MENU Button
(continued on next page)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
14. Review camcorder’s operating controls. (continued)
Model CC639 Only:
B (Bright) and C (Color) Controls
on Bottom of Viewfinder
See Trouble Checks for details.
SNAPSHOT Button
Shoulder Strap
Attachment Ring
SNAP
SHOT
SP•SLP
TER R/M
W.BAL.
TRACKING
+
PLAY/PAUSE
STOP
Clock Cell
FF
REW
Compartment
–
+
B
C
Attach Battery Here
JLIP
VCR
DC In Jack (Attach AC
Adapter/Charger Here)
POWER
OFF
CAMERA
Shoulder Strap
AUDIO
Attachment Ring
RF
DC OUT
BATT. RELEASE
Handstrap
VIDEO
JLIP Jack
Thumb Trigger
BATT. RELEASE Button
POWER (VCR/OFF/CAMERA) Switch
and Indicator
AUDIO, RF DC OUT, and
VIDEO Jacks
10
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
14. Review camcorder’s operating controls.
(CC639 Only)
Programmable Synchro
Edit Buttons
TRACKING Buttons
SP•SLP Button
(Also COUNTER R/M Button)
SP•SLP
IN/OUT
COUNTER R/M
TRACKING
EDIT
CANCEL RANDOM EDIT
MAN.W.BAL
EDIT
SEARCH
M.W.BAL (Manual
–
+
White Balance) Button
REW
FF
STOP PLAY/PAUSE
PLAY/PAUSE Button
STOP Button
REW Button
(Also EDIT SEARCH – Button)
FF Button
(Also EDIT SEARCH + Button)
SNAP
SHOT
SP•SLP
TRACKING
ER R/M
+
FF
L
PLAY/PAUSE
W.BAL.
STOP
REW
–
+
B
C
VCR
JLIP
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder
Using the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
To AC 100-240V,
50/60 Hz
E
–
+
B
C
POWER
CHG
END REFRESH
DC Cable
VCR
POWER
OFF
CAMERA
AUDIO
POWER
RF
BATT. RELEASE
DC OUT
VIDEO
Indicator
DC OUT Jack
Remove Adapter/Charger
Attach Adapter/Charger
1. Connect one end of the DC cable
to the DC OUT jack on the
adapter/charger.
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
2. Connect the other end of the DC cable
to the DC in jack on the camcorder as
shown above.
Using an Optional Plug Adapter
3. Plug the adapter/charger’s plug into
the nearest AC outlet (100-240V,
50/60Hz).
An optional plug adapter may be required
in some countries.
4. If the adapter/charger is properly
connected, its POWER indicator will
light.
Optional AC
Plug Adapter
Caution: Do not use this
adapter/charger for any other purpose
other than charging the FB1260 or
FB120 battery pack or supplying
power to the camcorder.
AC 100-240V
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into the
AC outlet.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder
Using the Battery to Power Your Camcorder
The battery must be charged as described on the next page before it can be used the
first time. Initial charging will take approximately 70 minutes. When fully charged,
the battery should supply about 55 minutes of operating time (depending on how much
you use the light, zoom, and pause). Conserve battery power by turning the camcorder
off during recording breaks.
Note: The small marker switch on top of the battery is for use as a personal reminder to help
you remember to recharge the battery. It has no other function.
Battery Safety
Precautions
Reference Marks
Do not short the battery’s
terminals.
Do not attempt to
L
disassemble or modify the
battery. There are no user-
serviceable parts inside.
Use the battery only with
specified adapter/chargers
and camcorders.
Marker
Switch
–
+
B
C
VCR
POWER
OFF
CAMERA
AUDIO
Throwing the battery into
a fire or exposing it to
excessive heat – over
149ºF (65ºC) could be
hazardous.
RF
BATT. RELEASE
DC OUT
VIDEO
POWER Switch
and Indicator
BATT. RELEASE Button
Attach the Charged Battery
If the DC cable is attached to the
camcorder, remove it before attaching the
battery. Also, install the lithium clock
cell before attaching the battery pack.
Details on page 55.
1. Align the reference mark on the battery
with mark on back of camcorder.
2. Hold the top of the battery flush against
the camcorder and press the bottom of
the battery down until it locks into
place.
3. Place the POWER switch in CAMERA.
The power indicator will light.
Remove the Battery
Press and hold BATT. RELEASE on the
camcorder while removing the battery.
ATTENTION: The RBRC seal on the battery used in your
Thomson Consumer Electronics product indicates that we are
participating in a program to collect and recycle Nickel
Cadmium batteries throughout the United States. Please call
1-800-8-BATTERY for information or contact your local
recycling center.
Ni-Cd
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder
CHG
Indicator
Hold Battery
Flush and
Slide
Reference Marks
POWER
Indicator
To AC Wall
Outlet 100-240
Volts, 50/60 Hz.
END
Indicator
POWER
CHG
END REFRESH
REFRESH
Button
REFRESH
Indicator
Adapter/Charger
Caution: When a battery is attached to the
adapter/charger, do not turn them upside down. The
battery may fall off and be damaged or cause injury.
Charge the Battery
Use the REFRESH Button
If the DC cable is attached to the DC
OUT jack on the adapter/charger, remove
its plug.
1. Align reference mark on battery with
mark on adapter/charger.
The battery will provide increased
operation time if you “refresh” it after
five chargings. The refresh feature
“refreshes” the battery by completely
discharging it.
2. Hold the battery flush against the
adapter/charger and slide it in the
direction of the arrow.
1. Attach battery to adapter/charger.
2. Press REFRESH. The REFRESH
indicator will light and the battery will
begin discharging.
3. Plug adapter/charger into nearest AC
outlet (100-240V, 50/60Hz).
3. When discharging is completed, the
REFRESH indicator will turn off, and
the CHG indicator will light. The
battery will then charge.
4. If the battery is properly connected, the
adapter/charger’s CHG (charge)
indicator will light.
Note: If you try to charge a battery that
has not been charged for a long period of
time, it may take a few minutes for the
CHG indicator to light.
4. After the battery is charged, the END
indicator will light. Remove the
battery from the adapter/charger.
5. After the battery is charged, the END
indicator will light.
6. Remove the charged battery by sliding
it off the adapter/charger.
7. Attach the charged battery to the
camcorder.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder
Battery Level Indicator
The battery level indicator appears in the
viewfinder and display panel and shows
you the amount of power in the
rechargeable battery.
• As the power is used
appear.
and
• When the battery power is almost gone,
flashes in the viewfinder. The
camcorder will turn off automatically
after a few seconds. Place the POWER
switch in OFF to turn off the
camcorder before replacing the battery.
The battery level indicator will not be
recorded on the tape when it appears in
the viewfinder.
Battery Level Indicator
in Viewfinder
Battery Care and Storage
• Recharging takes approximately 70
minutes depending on the battery’s
condition.
• The battery will also provide better
service if its power is completely
drained before storing it for long
periods of time (30 days or more).
• Refreshing takes approximately 210
minutes depending on the battery’s
condition.
• The battery should be charged in the
temperature range of 50-95°F (10-35ºC)
to prevent damage.
• After repeated charging and use,
operation time will gradually decrease.
When operation time becomes too short
to be useful, it is time to replace the
battery.
• Do not operate the battery at
temperatures below 32°F (0°C) or
above 104°F (40°C). The battery may
be damaged if operated at temperatures
above 122°F (50°C). Operation time
will decrease at extremely low
temperatures.
• If the battery discharging must be
stopped in the middle, remove the
battery from the adapter/charger before
unplugging it from the AC outlet.
• Store the battery at normal room
temperature.
• Let a hot battery cool down before
attaching it to the adapter/charger.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder
Optional Car Cord Adapter
The optional DCC08 car cord shown on
page 92 allows you to power your
camcorder from the cigarette lighter
socket of a car, truck, or RV. It converts
12-volts to a 6-volt output.
Cautions: The DCC08 is designed to be
used only with vehicles having negative
ground electrical systems.
Use only car cord adapter DCC08 with
this camcorder. Use of any other car
cord adapter may damage the camcorder
and void your warranty.
Note: Consult the installation and operating
instructions enclosed with the DCC08 for
complete operating instructions.
Using the DCC08 Car Cord Adapter
Cigarette
Lighter Socket
POWER Indicator
Power
Connector
–
+
B
C
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
Optional DCC08 Car Cord Adapter
1. Place the POWER switch in OFF to
turn off the camcorder. Power
indicator on the camcorder turns off.
5. Insert the car cord’s cigarette lighter
plug into the vehicle’s cigarette lighter
socket. The POWER indicator on the
car cord adapter will light.
2. If the battery or DC cable is attached
to the camcorder, remove it.
6. Place the POWER switch in CAMERA
to turn on the camcorder. The power
indicator on the camcorder lights.
3. Hold the top of the power connector
flush against the camcorder and press
the bottom of the power connector
down until it locks into place.
Caution: Make sure the camcorder’s
power is turned off before removing the
car cord’s plug from the cigarette lighter
socket.
4. Take the vehicle’s cigarette lighter out
of the socket.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Model CC639 Only: Remote Control
Model CC639 Only: Lithium Cell Installation
The remote’s lithium cell is packed separately. Install it as follows:
Back of
Remote Control
Cautions: Lithium cell battery. Replace
only with 3-volt lithium cell – such as CR2025.
Use of other cell presents a risk of fire or
explosion. Must be disposed of properly.
Never handle punctured or leaking cell. May
cause burns or personal injury.
Insert Pencil Here
Lithium Cell
Keep out of the hands of children. Can cause
death or injury if swallowed. If swallowed,
consult a physician immediately for emergency
treatment.
The lithium cell used in this device may explode
resulting in a fire or chemical burn if mistreated.
Do not recharge, disassemble, heat above 212˚F
(100˚C), or incinerate.
Belt Clip
Holder
Never use metallic tweezers to hold the cell, and
never short circuit the + and – sides of the cell.
Notes: Never place anything heavy on top of
the remote or lay it upside-down. This may
accidentally depress the buttons for a long
time and discharge the lithium cell.
1. Turn remote over, insert a pencil or
paper clip in the small hole, and slide
it in the direction of the arrow while
removing the holder.
Replace the cell when the camcorder fails to
respond to the remote.
2. Insert the lithium cell into the holder
with its positive (+) terminal facing up.
Remove the cell from the remote if it will not
be used for a month or more. This will
prevent possible damage from cell leakage. If
leakage occurs, wipe up the liquid inside the
compartment and replace the cell.
3. Slide the cell in the holder back into
the remote until it clicks into place.
Remote Sensor
The remote operates the camcorder by infrared light, so it is protected from electrical
and sound interference. However, the remote must be aimed directly at the
camcorder’s remote sensor. There cannot be any obstructions between them.
A
U
T
O
H
S
U
B
A
C
K
LIG
H
T
P
MENU
F
R
O
N
T
LIG
H
T
MA
N
U
A
L
16X9
AE MODE
S
EIS
PHOTO
TS
E
F
F
E
C
DATE/
TIME
F
ADE
WIPE
Remote Control Sensor
You can program the remote to also operate a
compatible VCR while copying or editing
tapes. Details are on pages 86-87.
Notes: The camcorder may not respond to
the remote if its sensor is exposed to direct
sunlight or strong artificial light.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Model CC639 Only: Remote Control
A brief description of Model CC639 remote button’s functions is given here. Many of
the buttons perform the same functions as the corresponding controls on the camcorder.
5
6
7
TIME LAPSE ANIM.
(Animation)/REC TIME
Button
1
SNAP
SHOT
START
/STOP
2
3
4
When the POWER switch is in
CAMERA, press to set amount
of recording time for interval
and animation recording.
VISS
T
TIME LAPSE
ZOOM
11
ANIM.
SELF
MBR
SET
REC
INT.
W
5
TIME
TIME
12
13
REW
F FWD
PAUSE
VCR
A.DUB
TIME LAPSE SELF/INT.
(Interval) TIME Button
6
7
PLAY
STOP
INSERT
When the POWER switch is in
CAMERA, press to activate the
self-timer or select an amount
of interval time for interval
recording.
14
15
16
8
CANCEL REC/PAUSE
9
IN
OUT
ON
OFF
10
RANDOM ASSEMBLY EDIT
REW (Rewind) Button
1 START/STOP Button
When the POWER switch is in
CAMERA, press START/STOP to
start and stop recording.
Note: If the camcorder is left in record
pause for more than five minutes, power
will turn off.
Camcorder’s POWER switch in
CAMERA:
• When the camcorder is in
record pause, press and hold
REW to visually search the
tape in reverse. Release REW
to return to record pause.
2
SNAPSHOT Button
When the POWER switch is in
CAMERA, press SNAPSHOT to
record using the snapshot mode
selected with the PHOTO EFFECTS
button See pages 40-41.
Camcorder’s POWER switch in
VCR:
• When the camcorder is
stopped, press REW to rewind
the tape.
3
4
VISS Button
• When a tape is playing, press
and release REW to visually
search the tape in reverse.
Press PLAY to return to
When the POWER switch is in
CAMERA, press VISS to insert an
index mark. See page 43.
normal playback. For brief
searching, press and hold
REW for at least two seconds
to visually search in reverse.
Release REW to return to
normal playback.
MBR SET Button
This button is used to program the
remote to control a compatible VCR.
See pages 86-87.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Model CC639 Only: Remote Control
8
11
F FWD (Fast Forward) Button
ZOOM (T and W) Buttons
Camcorder’s POWER switch in
CAMERA:
Camcorder’s POWER switch in
CAMERA:
• Press T to move the lens in the
telephoto (close-up) direction.
• Press W to move the lens in the
wide-angle direction.
• With camcorder in record pause,
press and hold F FWD to visually
search forward on the tape.
Release F FWD to return to record
pause.
12
13
14
VCR Button
Camcorder’s POWER switch in
VCR:
This button is used to control a
compatible VCR. See pages 86-87.
• When the camcorder is stopped,
press F FWD to fast forward the
tape.
A. (Audio) DUB Button
Used for dubbing audio. See
pages 70-71.
• When a tape is playing, press and
release F FWD to visually search
forward on the tape. Press PLAY
to return to normal playback. For
brief searching, press and hold
F FWD for at least two seconds to
visually search forward. Release
F FWD to return to normal
INSERT Button
Used for dubbing video. See
pages 72-73.
STOP Button
15
16
When the camcorder’s POWER
switch is in VCR, press STOP to
stop playback, rewind, or fast-
forward operation.
playback.
9
PLAY Button
Press PLAY when the Camcorder’s
POWER switch is in VCR to begin
playback.
RANDOM ASSEMBLY EDIT
Buttons (IN/OUT, CANCEL,
REC/PAUSE, and ON/OFF)
These buttons are used during
editing with a compatible VCR.
See pages 86-89.
10
PAUSE Button
During playback, press PAUSE to
produce a stop-action picture. Press
PAUSE or PLAY to return to normal
playback.
Caution: Pause is designed for
momentary interruptions and
should not be used for an extended
period of time. If the camcorder
remains in pause for more than five
minutes, it will automatically enter
the stop mode and then turn off.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Model CC638 Only: Remote Control
Model CC638 Only: A brief description of Model CC638 remote button’s
functions is given here. Many of the buttons perform the same functions as the
corresponding controls on the camcorder. The lithium cell must be installed as shown
on page 22.
START/STOP
6
1
ZOOM
SELF
INT.
TIME
7
8
TIME LAPSE
PLAY
STOP
REW
REC
TIME
2
ANIM.
PAUSE
3
4
5
9
FF
10
11
INSERT
A.DUB
1
REW (Rewind) Button
4
ZOOM (T and W) Buttons
Camcorder’s POWER switch in
CAMERA:
Camcorder’s POWER switch in
CAMERA:
• Press T to move the lens in the
telephoto (close-up) direction.
• Press W to move the lens in the
wide-angle direction.
• When the camcorder is in record
pause, press and hold REW to
visually search the tape in reverse.
Release REW to return to record-
pause.
2 PLAY Button
Camcorder’s POWER switch in VCR:
Press PLAY when the camcorder’s
POWER switch is in VCR to begin
playback.
• When the camcorder is stopped,
press REW to rewind the tape.
Press STOP to stop rewinding tape.
3
STOP Button
• When a tape is playing, press and
release REW to visually search the
tape in reverse. Press PLAY to
return to normal playback. For
brief searching, press and hold
REW for at least two seconds to
visually search in reverse. Release
REW to return to normal playback.
When the camcorder’s POWER
switch is in VCR, press STOP to stop
playback, rewind, or fast-forward
operation
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Model CC638 Only: Remote Control
5
INSERT Button
10
FF (Fast Forward) Button
Used for dubbing video. See
Camcorder’s POWER switch in
pages 72-73.
CAMERA:
• With camcorder in record pause,
press and hold FF to visually
search forward on the tape.
Release FF to return to record
pause.
6
START/STOP Button
When the POWER switch is in
CAMERA, press START/STOP to
start and stop recording.
Note: If the camcorder is left in record
pause for more than five minutes, power
will turn off.
Camcorder’s POWER switch in
VCR:
• When the camcorder is stopped,
press FF to fast forward the tape.
Press STOP to stop forwarding the
tape.
TIME LAPSE SELF/INT.
(Interval) TIME Button
7
8
When the POWER switch is in
CAMERA, press to activate the self-
timer or select an amount of interval
time for interval recording.
• When a tape is playing, press and
release FF to visually search
forward on the tape. Press PLAY
to return to normal playback. For
brief searching, press and hold FF
for at least two seconds to visually
search forward. Release FF to
return to normal playback.
TIME LAPSE ANIM.
(Animation)/REC TIME Button
When the POWER switch is in
CAMERA, press to set amount of
recording time for interval and
animation recording.
11
A. (Audio) DUB Button
9
PAUSE Button
Used for dubbing audio. See
pages 70-71.
During playback, press PAUSE to
produce a stop-action picture. Press
PLAY or PAUSE to return to normal
playback.
Caution: Pause is designed for
momentary interruptions and
should not be used for an extended
period of time. If the camcorder
remains in pause for more than five
minutes, it will automatically enter
the stop mode and then turn off.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Model CC638 Only: Remote Control
Model CC638 Only: Install Lithium Cell
The remote’s lithium cell is packed separately. Install it as follows:
Holder
Back of
Remote Control
Insert Pencil Here
Lithium Cell
Cautions: Lithium cell battery. Replace only with 3-volt lithium cell – such as CR2025. Use of
other cell presents a risk of fire or explosion. Must be disposed of properly. Never handle
punctured or leaking cell. May cause burns or personal injury.
Keep out of the hands of children. Can cause death or injury if swallowed. If swallowed, consult
a physician immediately for emergency treatment.
The lithium cell used in this device may explode resulting in a fire or chemical burn if mistreated.
Do not recharge, disassemble, heat above 212˚F (100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the + and – sides of the cell.
Notes: Never place anything heavy on top of
the remote control or lay it upside-down.
1. Turn remote over, insert a pencil or
paper clip in small hole and remove
Replace battery when camcorder fails to
battery holder.
respond to remote.
2. Insert battery in battery holder so
positive (+) terminal faces up.
Remove battery from remote if it will not be
used for a month or more. This will prevent
possible damage from battery leakage.
If leakage occurs, wipe up liquid inside
compartment and replace battery.
3. Replace battery holder in remote until
it clicks into place.
Remote Sensor
The remote operates the camcorder by infrared light, so it is protected from electrical
and sound interference. However, the remote must be aimed directly at the
camcorder’s remote sensor. There cannot be any obstructions between them.
A
U
T
O
H
S
U
B
A
C
K
LIG
H
T
P
MENU
F
R
O
N
T
LIG
H
T
MA
N
U
A
L
16X9
AE MODE
S
EIS
P
H
O
T
O
Remote Control Sensor
E
F
F
E
C
TS
D
A
T
E
/
F
ADE
WIPE
T
IME
Note: The camcorder may not respond to the remote if its sensor is exposed to direct
sunlight or strong artificial light.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Tips
• Fading or wiping in and out of scenes
will make your videos appear more
professional.
• In case of fire or theft, make a video
recording of your home and contents to
store in a safe place.
• Learn to use the special production
effects available with your camcorder
to add variety to your recordings.
• Try to make sure indoor scenes are
well-lit. Use the built-in light. This
improves picture quality and color
reproduction.
• Be aware of video and audio
backgrounds. Background details
barely noticed while you are taping
may show up as visual “clutter” on
your recording. Background noises
(especially TV sets, radios, household
appliances, traffic sounds, etc.) can
detract from the sound you want to
record.
• Do not move the camcorder rapidly
from side-to-side while recording.
A steady, gradual “pan” avoids
blurring and “jitter”.
• Use the viewfinder to make sure the
camcorder is level while recording or
your scenes will appear “tilted”.
• Avoid long “still” shots of landmarks
and scenic attractions. Recordings are
more interesting if they include people
and details. “Local color” will give
travel videos lasting appeal. Consider
recording a familiar or landmark scene
from an unfamiliar vantage point.
• Do not bump or tap the camcorder’s
microphone while recording because
this sound will be recorded.
• Include close-ups and snapshots of
individuals when taping family outings
or group functions.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Cassettes
We recommend that our cassettes be used with your camcorder. Use of poor quality
tapes or tapes that have been damaged or mishandled can contaminate the video heads,
resulting in a snowy picture or no picture at all during playback. Because there is no
control over the type of tape purchased or rented by consumers, head cleaning is not
covered under warranty. It is considered normal maintenance.
The automatic head-cleaning system minimizes the need for accessory cleaners or
cleaning by a Servicenter. This system is activated whenever you insert or remove a
cassette.
Erase Protection – Safety Tab
You can use your video cassettes over and over again. To erase a previous recording,
just record over it.
Safety
Tab
A. Remove
B. Cover hole
safety tab or
with vinyl tape or
slide tab to REC ON to
record over tape.
slide tab to
REC OFF.
Recording and Playback Speeds and Times
The camcorder records and plays back in standard speed (SP) or extended play (SLP).
Select the recording speed using the SP•SLP switch. The selected speed will be
displayed in the viewfinder and display panel. Listed below are the maximum SP and
SLP recording times for popular VHS-C cassettes.
• SP – Standard play provides the
best picture (less picture noise),
but the shortest recording time
Recording Time
Cassette
TC-20
TC-30
TC-40
SP
SLP
60 Min.
90 Min.
120 Min.
(20 minutes with a TC-20 tape).
20 Min.
30 Min.
40 Min.
• SLP – Extended play provides
three times the recording time as
SP (60 minutes with a TC-20
tape). SLP has slightly more
picture noise than SP in normal
playback. This may not be
noticeable.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Cassettes
Inserting and Removing Cassettes
Caution:
Insert the
EJECT Button
cassette only
one way with
the tape wheel
facing up and
the tape win-
dow facing
out. The
EJECT
Tape Wheel
OFF
ON
H
S
U
PAUSE
P
cassette should
slide easily
into the com-
partment. Do
not force the
cassette.
OFF
AUT
ON
PUSH
Here to
Close
Cassette
Compart-
ment
LIGHT
Safety Tab
Tape Window
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
1. Attach a power supply. Then slide and
release EJECT to open the cassette
compartment.
2. Insert or remove the cassette.
3. Close the cassette compartment door
by pressing on the area labeled PUSH
until it locks into place.
Tape Wheel
Cassette Care and Storage
• Keep dust from entering the cassette
compartment. All dust is abrasive and
will cause excessive wear on the tape
and the camcorder’s recording or
playback heads.
• Do not use cassettes with damaged or
spliced tape.
• Do not use a cassette if it has been
damaged or exposed to moisture. The
tape may jam and/or damage your
camcorder.
• When you are finished with a cassette,
rewind it, remove it from the
camcorder, and label it.
• Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold may damage
your cassettes.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Making a Recording
The steps below tell you how to make a recording and suggest using some of the
recording features. Each feature is described in detail on the following pages.
SP•SLP Button
SNAPSHOT
Button
Eyepiece
Focus
EDIT SEARCH – Button
Control
SNAP
SHOT
SP•SLP
ER R/M
W.BAL.
TRACKING
+
L
PLAY/PAUSE
STOP
FF
REW
–
+
B
C
LENS COVER Control
JLIP
VCR
POWER
OFF
CAMERA
Zoom
Lever
Tally Light
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
EJECT
Button
POWER Switch
and Indicator
AUTO
H
S
U
B
A
C
K
LIG
H
T
P
MENU
16X9
MANUAL
F
R
O
N
T
LIG
H
T
LIGHT OFF
•AUTO•ON
Switch
AE MODES
EIS
PHOTO
TS
E
F
F
E
C
DATE/
TIME
FADE
WIPE
MENU Button
Mode Select
16X9/AE MODES
Button
Dial
PHOTO
EFFECTS Button
FADE/WIPE
Button
EIS Button
1. Attach a power supply.
4. Place the POWER (CAMERA/
OFF/VCR) switch in CAMERA.
Attach the adapter/charger, charged
battery, or optional DC car cord.
The power indicator will light and the
camcorder will enter record pause.
2. Insert a tape.
PAUSE
appears in the viewfinder.
• Slide EJECT.
5. Adjust the viewfinder and eyepiece
focus control for your vision.
• Turn the tape wheel on the cassette
to remove any slack from the tape.
6. Select a recording speed and tape
length.
• Insert the cassette with the tape
wheel facing up and the tape window
facing out.
A. Place the SP•SLP switch in SP or
SLP to select a recording speed.
3. Slide the LENS COVER control to
B. Make sure the mode select dial is in
open the lens cover.
MANUAL.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
C. Press the MENU button and use the
in the center of the mode select
dial to highlight TAPE LENGTH.
Use and to select the length of
the tape you are using (T20, T30, or
T40) so the camcorder can
C. Repeatedly press the FADE/WIPE
button to select a fade or wipe.
• Select Black Fader, Blue Fader,
Mosaic Fader, Door Wipe, Scroll
Wipe, Window Wipe, Dissolve, or
Auto Select.
correctly calculate the time
remaining. Press the MENU button
again to remove the menu.
• The effect is automatically
activated, and its indicator
appears in the viewfinder.
• Details are on pages 66-67.
7. Place the LIGHT OFF•AUTO•ON
switch in AUTO.
10. Start and stop recording.
• Press and release the thumb trigger
to start recording. REC
The light will turn on automatically
when you need more light.
appears in the viewfinder and the
tally light will light when the
camcorder is recording.
• Press and release the the thumb
trigger again to stop recording. The
camcorder is now in record pause.
8. Select a production special effect to
add variety to your recordings.
A. Make sure the mode select dial is in
MANUAL.
B. Press the 16X9/AE MODES button
to display the production effects
menu in the viewfinder.
PAUSE
appears in the viewfinder.
• The camcorder will automatically
turn off if it remains in record pause
for five minutes. Place the POWER
switch in OFF and then back in
CAMERA.
C. Repeatedly press the 16X9/AE
MODES button to select one of the
production effects.
• Select Cinema (16X9 effect),
Sepia (brown-tone effect), Sports
(fast moving action), Back Lit
(subject in strong back light),
Front Lit (subject in spotlight),
Classic Film (flickering old-time
movie), Strobe, or Slow Shutter
(dark locations).
11. Use the zoom and SNAPSHOT
features.
• Zoom in and out using the zoom T
and W lever.
• Press the PHOTO EFFECTS button
to select a type of snapshot effect
(pin-up, frame, full, multi-4, or
multi-9). Press SNAPSHOT to add
snapshots to your recording.
12. Review what you have recorded.
• Press and quickly release EDIT
SEARCH – to review the last few
seconds of your recording.
• The effect is automatically
activated, and its indicator
appears in the viewfinder.
• Details are on pages 68-69.
9. Add fades and wipes.
A. Make sure the mode select dial is in
MANUAL.
13. When you are finished, place
POWER switch in OFF and close
the lens cover.
B. Press the FADE/WIPE button to
display the fade menu in the
viewfinder.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
LCD Panel
The LCD panel on the side of the camcorder displays what the camcorder is doing.
4
5
1
6
2
3
4
1
Tape Remaining
Status Indicators
• Shows the amount of tape time
remaining.
The status of the camcorder appears
here.
• PLAY appears here when the
camcorder’s POWER switch is in
VCR.
5 Cassette Warning
• The indicator appears when
there is a cassette in the camcorder.
• The indicator flashes when the
• REC appears here when the
camcorder’s POWER switch is in
CAMERA.
power dial is set to CAMERA or
VCR and there is no cassette in the
camcorder.
2
3
Tape Speed Indicator (SP or SLP)
The tape speed selected with the
SP•SLP switch appears here.
6
Battery Level Indicator
• This indicator shows how much
power is left in the rechargeable
battery.
Cassette Moving Indicator
This indicator shows the cassette is
moving.
• This indicator flashes when the
battery is almost empty.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Viewfinder
The camcorder’s viewfinder is a miniature monitor that displays the picture
seen by the camcorder when recording.
Adjust Viewfinder for Convenient Viewing
For convenient viewing, you can slide the viewfinder out from the camcorder
and rotate it up and down.
Viewfinder
Eyepiece Focus Control
Cautions
Do not force the
viewfinder to rotate
SNAP
SHOT
completely around.
SP•SLP
This will damage the
viewfinder and/or the
camcorder.
TRACKING
TER R/M
W.BAL.
+
FF
PLAY/PAUSE
STOP
REW
–
+
B
C
When carrying the
camcorder with the
shoulder strap, put the
viewfinder down and
in. This helps prevent
possible damage to
the viewfinder from
bumping against your
body as you move.
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
Eyepiece Focus Control
The eyepiece focus control lets you set the focus of the viewfinder for your
personal vision. If you wear eyeglasses, you probably can operate the camcorder
without them.
It is easiest to set the correct focus by
focusing on one of the viewfinder’s on-
screen displays.
Look through the viewfinder and adjust
the eyepiece focus control for your vision.
The eyepiece focus control does not affect
the focus of the picture actually recorded
by the camcorder.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Viewfinder Displays
8
9
10
1
W
REC SP
2
3
4
5
6
7
Pin-Up
Bk
T
PAUSE
Happy Birthday
NOV 18.96 PM 8:30:00
1
2
Tape Speed Indicators (SP or SLP)
•
•
appears when you select Sports
to record fast moving action, such
as sporting events.
The tape speed selected with the
SP• SLP button appears here.
• Details on page 24.
appears when you select
Back–Lit to make a subject appear
brighter that appears too dark
because of backlighting.
Status Displays
• The REC
indicator appears
when the camcorder is recording.
•
•
appears when you select
Front–Lit to darken a subject that
appears too bright because of front
lighting.
PAUSE
• The
indicator appears
during record pause.
3
Production Effects Indicators
The indicator for the production
effect selected with the 16X9/AE
MODES button appears here. When
the mode select dial is in AUTO,
Cinema is automatically selected.
Place the mode select dial in
appears when you select
Classic Film to record in black and
white with strobe images to create
the vintage look of film being
shown on a movie projector.
•
•
appears when you select Strobe
to make your recordings look like a
series of snapshots.
MANUAL to select the other effects.
•
appears when you select
Cinema to “letterbox” record with
black bars so you can play back
your recordings on a 16X9 TV.
appears when you select Slow
Shutter to record areas that are
normally too dark to record.
•
appears when you select Sepia
to give your recordings a brown-
tone like old photographs.
• Details are on pages 68-69.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
4
5
6
Fade, and Wipe Indicators
Change Indicator (u)
The indicator for the fade or wipe
scene transition selected with the
FADE/WIPE button appears here.
When the mode select dial is in
AUTO, Black Fader is automatically
selected. Place the mode select dial
in MANUAL to select the other fades
or wipes.
This indicator will appear to let you
know that an item in the recording
menu has been changed from the
original factory setting.
Title
The preset title you select or the title
you create will appear in this area.
• The title will be recorded on your
tape when it appears.
BK
•
appears when you select Black
Fade and fade in and out from a
black screen.
• Details are on pages 52-53.
7
Date or Date and Time
•
•
•
appears when you select Blue
Fade and fade in and out from a
blue screen.
appears when you select
Mosaic Fade and fade in and out
with a mosaic effect.
appears when you select Door
Wipe and wipe in from a black
screen opening to the sides or wipe
out from the center to the sides
leaving a black screen.
C
The date, time, or date and time
appears in this area of the
viewfinder when you press the
DATE/TIME button.
• These displays will be recorded on
your tape when they appear.
• Details are on pages 56-57.
8
Snapshot Indicator (Pin-Up,
Frame, Full, Multi4, or Multi9)
The indicator for the type of
snapshot selected with the PHOTO
EFFECTS button appears here.
• Press the SNAPSHOT button to
take a snapshot.
•
•
appears when you select Scroll
Wipe and wipe in from a black
screen from the bottom to the top
or wipe out from the top to the
bottom leaving a black screen.
appears when you select
• Details are on pages 40-41.
9
Battery Level Indicator
• This indicator shows power left in
the rechargeable battery.
• This indicator flashes when the
battery is almost empty.
Window Wipe and wipe in from a
black screen from the center to the
corners or wipe out from the
corners to the center leaving a
black screen.
P
•
appears when you select
• Details are on page 15.
Dissolve and the new scene
gradually appears as the old one
dissolves.
• – – appears when you select Auto
Select and the camcorder selects
one of six different wipes.
10
Zoom Indicator
The zoom indicator appears here
when you use the zoom lever.
• Details on page 48.
• Details are on pages 66-67.
(continued on next page)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Viewfinder Displays (continued)
11
17
18
19
20
21
22
23
24
T 30
0min
12
13
14
15s
10s
M 0:00:00
+03
MWB
LENS COVER
15
16
11
14
15
Time Remaining Display
Electronic Image Stabilizer (
)
The approximate time remaining on
the tape is automatically displayed
here. The correct TAPE LENGTH
must be set in the recording menu.
Details are on page 47.
This indicator appears when the
electronic image stabilizer is turned
on with the EIS button.
• See page 42 for details.
Warnings and Information
12
13
Edit Insert
• LENS COVER: When you turn on
the camcorder, this indicator briefly
flashes to remind you to open the
lens cover.
•
appears during edit insert.
Details are on pages 72-73.
Self-Timer, Animation, and Time-
Lapse Indicators
• LENS COVER: This indicator may
flash when the camcorder is used in
dark areas — even if the lens cover
is open.
• The interval time selected for self-
timer or time-lapse recording (
15S, 30S, 1min, 5min) appears here.
Details are on pages 60-61 and
64-65.
• AUTO PAUSE appears when the
auto pause feature is turned on with
the AUTO PAUSE ON/OFF button.
Details are on page 43.
• The rec time selected for animation
or time-lapse recording (
1/4S,
• INDEX appears when an index
mark is being made on the tape.
Details are on page 43.
1/2S, 1S, or 5S) appears here.
Details are on pages 62-65.
• TAPE END appears when the end
of the tape is reached during
recording or a cassette is inserted
with its tape already at the end.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
16
21
Dew Warning (
)
Manual Focus Indicators (
)
The dew indicator appears when
excessive moisture (condensation)
has entered the camcorder. The
camcorder will not operate when
this indicator appears. Place the
camcorder in a warm, dry area until
this indicator disappears.
These indicators appear when focus
is adjusted manually using the
FOCUS or button. The mode
select dial must be in MANUAL.
• Manual focus lock indicators (
appear when focus is moving
toward near or far.
)
17
18
Tape Length
• Low-contrast indicators (
flash when the auto-focus system
cannot focus properly.
)
The tape length (T20, T30, or T40)
selected with the Tape Length
feature on the recording menu
appears here. Details are on
page 47.
• Details are on pages 38-39.
22
Exposure Indicator
This indicator appears when you are
adjusting brightness manually using
the FRONTLIGHT or BACKLIGHT
button. The mode select dial must
be in MANUAL. Details are on
page 37.
Cassette Warning
•The
indicator appears when a
cassette is in the camcorder.
• The
indicator flashes when the
POWER dial is set to CAMERA and
there is no cassette in the
camcorder.
23
White Balance Indicators
If you adjust white balance
manually, the indicator (MWB,
or ) for the mode you
select appears here. The mode
select dial must be in MANUAL.
Details are on pages 40-41.
,
19
Audio Dub
,
,
•
appears during audio dubbing.
Details are on pages 70-71
• The pause indicator ( ) appears
with when the camcorder is
paused during dubbing.
24
Lithium Cell (
)
• This indicator flashes for a few
seconds when you first turn on the
camcorder and the time and date
have not been set.
20
Elapsed Time-Counter
• The time counter appears during
playback. It is not recorded.
• This indicator also appears when
• An “M” appears in front of the time
the clock cell is missing or it needs
to be replaced.
Details are on page 55.
counter when memory-stop is on.
• Details are on page 82.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Microphone
AUTO
H
S
U
B
A
C
K
LIG
H
T
P
EDIT SEARCH – and + Buttons
MENU
16X9
MANUAL
F
R
O
N
TLIG
H
T
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
SNAP
SHOT
SP•SLP
TRACKING
TER R/M
W.BAL.
+
FF
L
PLAY/PAUSE
STOP
REW
–
+
B
MIC Jack
C
Tally Light
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
POWER Switch in
CAMERA
Flying Erase Head
Tally Light
A separate erase head is mounted on
the spinning headwheel (hence the term
The tally light lights when the camcorder
is recording.
“flying”). This allows you to make clean
edits without the “glitches” or “rainbow
noise” that may occur at the beginning or
the end of recordings.
The tally light can be turned on or off
using the recording menu. See page 59
for details.
Microphone
Auto Head Cleaner
The microphone picks up the sound
during a recording. It is more sensitive to
sounds coming from the direction the
lens is pointed.
The camcorder has an automatic head-
cleaning system. Whenever a cassette is
inserted or removed, this system is
activated.
The head-cleaning system minimizes the
need for accessory cleaners or cleaning
by a Servicenter.
External MIC (Microphone)
Jack
The camcorder has an external MIC
(microphone) jack for attaching an
optional microphone.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Model CC638’s Remote
Model CC639’s Remote
START/STOP
Button
START/STOP
Button
START/STOP
SNAP
SHOT
START
/STOP
ZOOM
SELF
INT.
TIME
VISS
TIME LAPSE
PLAY
T
REC
TIME
TIME LAPSE
ZOOM
F FWD
Button
ANIM.
SELF
MBR
SET
ANIM.
FF
Button
REC
TIME
INT.
TIME
STOP
REW
PAUSE
W
REW
Button
REW
F FWD
PAUSE
VCR
A.DUB
FF
REW
Button
PLAY
STOP
INSERT
INSERT
A.DUB
CANCEL REC/PAUSE
IN
ON
OFF
OUT
RANDOM ASSEMBLY EDIT
Quick Review Feature
Camera Edit Feature
Press and release EDIT SEARCH – (REW
on remote) when the camcorder is in
record pause to review the last few
seconds of a recording. The POWER
switch must be in CAMERA.
The camera edit feature allows you to
position the tape when the camcorder is
in record pause. Place POWER switch in
CAMERA.
• Press and hold EDIT SEARCH – (REW
on remote) to visually search the
recorded tape in reverse.
The camcorder will play back the last
few seconds of the recording, return the
tape to its previous position, and return to
record pause.
• Press and hold EDIT SEARCH +
(F FWD or FF on remote) to visually
search forward on the recorded tape.
Release the button to return the
camcorder to record pause at that point
on the tape. Press the thumb trigger
(START/ STOP on remote) to start
recording at this point.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Mode Select Dial
The mode select dial lets you select automatic or manual control of several features.
The center of the dial lets you focus manually and control the iris. The arrow buttons
are also used with the menus.
AUTO
H
S
U
BACKLIGHT
P
MENU
16X9
MANUAL
FRONTLIGHT
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
Mode Select Dial
Full AUTO Mode
1. Place the POWER dial in CAMERA.
• The only scene transitions that you
can use is the black fader.
• The power indicator will light and
the camcorder will enter record
• The only production special effects
you can use is cinema.
PAUSE
pause.
appears in the
viewfinder.
• Menu changes cannot be made.
2. Place the mode select dial in AUTO.
3. Press the thumb trigger to start
recording.
• The camcorder will control the
focus, exposure, and white balance
for you.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Exposure Control
When the mode select dial is in AUTO, the camcorder controls the iris for you. Under
normal conditions, the camcorder will adjust brightness automatically. You may need
to adjust brightness manually when the background is too bright or too dark in
comparison with the subject.
AUTO
H
S
BACKLIGHT (
)
U
BACKLIGHT
P
MENU
16X9
MANUAL
FRONTLIGHT
FRONTLIGHT (
)
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
Mode Select Dial
Manual Exposure
To Turn Off Manual Exposure
Press both BACKLIGHT and
1. Place the POWER dial in CAMERA.
FRONTLIGHT at the same time or place
the mode select dial in AUTO.
• The power indicator will light and
the camcorder will enter record
PAUSE
pause.
appears in the
viewfinder.
Conditions Requiring Manual
Exposure
2. Place the mode select dial in
MANUAL.
• When recording with a bright
background or reverse lighting.
• Press BACKLIGHT to brighten the
• When recording with a very dark
background or very bright subject.
image.
• Press FRONTLIGHT to darken the
image.
• When recording a reflective natural
background — such as a beach or when
skiing.
• The exposure level indicator
(± 0 to 6) appears in the viewfinder.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Focusing
Under normal conditions, the camcorder can adjust focus automatically. Under
certain conditions, you may need to focus manually.
FOCUS ( )
AUTO
H
S
U
BACKLIGHT
P
FOCUS ( )
MENU
16X9
MANUAL
FRONTLIGHT
AE MODES
EIS
Mode Select Dial
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
Auto Focus
Focus Lock Feature
During auto focus the camcorder will
focus automatically on the object located
in the center area of the viewfinder.
The focus lock feature is useful when
objects pass between your subject and the
camcorder or your main subject is not
located in the center of the viewfinder.
• Place the mode select dial in AUTO to
turn on the auto focus feature.
1. Place the mode select dial in
MANUAL.
Note: The low-contrast indicator (
)
in the viewfinder indicates the
2. Center the main object in the
viewfinder.
auto-focus system may not operate correctly
due to low illumination, low or no contrast,
repeated patterns, or two subjects at
different distances overlapping.
3. Press FOCUS or FOCUS to focus
on the main subject. (
) appears
in the display panel and viewfinder.
4. Press FOCUS and FOCUS
together (or place mode select dial in
AUTO) to turn auto focus back on.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Manual Focus
Under certain conditions, such as those listed, you may need to focus manually.
1. Set the mode select dial to MANUAL.
adjusted any farther, the
indicator
will flash. When the focus cannot be
2. Slide the power zoom lever toward T
to zoom in on your subject. To
adjusted any closer, the
will flash.
indicator
maintain proper focus throughout the
zoom range, you must zoom in on the
subject before adjusting the focus.
4. Release the FOCUS or FOCUS to
lock in the manual focus.
5. Press FOCUS and FOCUS
together (or place mode select dial in
AUTO) to turn auto focus back on.
3. Press FOCUS or FOCUS to
display a clear picture in the center of
the viewfinder.
The
indicators appear in the
viewfinder. The or indicator will
flash. When the focus cannot be
Conditions Requiring Manual Focus
• When recording a subject through a
window.
• When the subject is not in the center of
the viewfinder.
• When recording a subject having a close
foreground and a background that is far
away.
• When recording in low-light situations.
• When recording a scene with fast
motions, like a tennis swing.
• When recording two subjects at different
distances that overlap in the same scene.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Snapshot Feature
The snapshot feature lets you take a snapshot or snapshots like a regular camera.
You can select one of five different types of snapshots. You can also record a
series of still pictures similar to serial photographs.
SNAPSHOT Button
Pin-Up
PAUSE
AUTO
H
S
U
BACKLIGHT
P
Viewfinder Display
MENU
16X9
MANUAL
FRONTLIGHT
AE MODES
EIS
PHOTO
EFFECTS
SNAP
SHOT
START
/STOP
DATE/
TIME
FADE
WIPE
SNAPSHOT
Button
VISS
T
TIME LAPSE
ZOOM
ANIM.
SELF
MBR
SET
REC
INT.
W
TIME
TIME
PHOTO
EFFECTS
Button
REW
F
FWD
VCR
A.DUB
PLAY
PAUSE
STOP
INSERT
CANCEL REC/PAUSE
IN
ON
OFF
OUT
RANDOM ASSEMBLY EDIT
Model CC639’s Remote
To Add Snapshots to Your Tape
1. Repeatedly press PHOTO EFFECTS on the camcorder to select
the type of snapshot you want.
• Select Pin-Up to have the scene
appear with a white dimensional
frame on a blue background.
• Select Frame to have a white frame
around the entire scene.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
• Select Full to take a snapshot of the
2. Press and release the SNAPSHOT
entire scene.
button.
• If the camcorder is in record pause,
the sound effect of a shutter closing
is recorded with a four second
snapshot. The camcorder then
returns to record/pause.
• If the camcorder is recording, the
sound effect of a shutter closing is
recorded with a four second
snapshot. The camcorder then
returns to normal recording.
• Select Multi 4 to have four snapshots
with white dimensional frames
appear on a blue background.
Note: If you are using the Frame or
Full mode, the normal recording
gradually appears over the snapshot.
If you are using the Pin-Up, Multi 4, or
Multi 9 mode, the normal recording
wipes in from the center of the
viewfinder.
3. Serial Snapshots (Camcorder Only):
Press and hold the SNAPSHOT button
on the camcorder to take snapshots
seconds apart. This gives the effect of
serial photography.
Note: When using the serial snapshot
feature, the shutter sound and the
appearance of the snapshots may not
match.
• Select Multi 9 to have nine
snapshots with white dimensional
frames appear on a blue background.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Electronic Image Stabilizer (EIS)
The electronic image stabilizer helps compensate for unstable images
caused by camera shake that can be created by recording out of a moving
vehicle or while walking.
AUTO
H
AUTO PAUSE
S
U
BACKLIGHT
P
OFF/ON Switch
MENU
16X9
MANUAL
FRONTLIGHT
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
Mode Select Dial
EIS Button
To Turn On EIS
1. Place the POWER switch in CAMERA.
Turn off EIS when using a tripod.
Stabilization may not be possible if hand
shake is excessive or when shooting the
following:
2. Press the EIS button. The EIS
indicator appears in the viewfinder.
• Subjects with vertical or horizontal stripes.
• Low contrast subjects or backgrounds or
dark or dim subjects.
• Subject with excessive backlighting.
• Scenes with movements in various
directions.
EIS Indicator in
Viewfinder
To Turn Off EIS
Press the EIS button. The EIS indicator
disappears from the viewfinder.
Notes: EIS does not operate when slow
shutter is activated. The
flashes letting
you know EIS is not functioning.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Auto Pause Feature
The auto pause system places the camcorder in record pause when it is tilted
approximately 90 degrees up or down or turned upside down.
To Turn On the Auto Pause System
Record Pause
• Slide AUTO PAUSE OFF/ON switch
to ON.
90
If the camcorder is tilted approximately
90 degrees up or down, turned upside
down, or turned on its side during
recording, it will automatically enter
record pause. AUTO PAUSE appears
in the viewfinder.
A
U
T
O
H
Record
S
U
B
A
C
K
LIG
H
T
P
MENU
F
RO
N
T
LIG
HT
MA
N
U
A
L
16X9
AE MODE
S
EIS
P
E
H
O
T
O
F
F
E
C
TS
D
A
T
E
/
FADE
WIPE
T
IME
To Turn Off the Auto Pause System
• Slide AUTO PAUSE OFF/ON switch to
OFF.
Record Pause
The camcorder will record in any
position.
180
Electronic Indexing
An index mark is automatically recorded at the beginning of a recording after a
cassette is inserted. When you play back the indexed tape in a VCR that has a
compatible indexing feature called “VHS Index Search System”, the invisible marks
can be located automatically. See VCR owner’s manual.
Record an Index Mark – CC639 Remote Only
• Press VISS on the remote during
VISS
Button
SNAP
SHOT
START
/STOP
recording.
• Press VISS during record pause to
make an index mark on the tape when
you start recording.
VISS
T
TIME LAPSE
ZOOM
ANIM.
SELF
MBR
SET
REC
INT.
W
TIME
TIME
REW
F FWD
PAUSE
VCR
A.DUB
INDEX flashes in the viewfinder when an
PLAY
STOP
INSERT
index mark is recorded.
CANCEL REC/PAUSE
Note: No other function can be performed
IN
OUT
ON
OFF
during index recording.
RANDOM ASSEMBLY EDIT
Model CC639’s Remote
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
White Balance
Making colors look natural is what white balance is all about. This is achieved by
adjusting the way the camcorder “sees” and records the light source in the scene you
wish to record. Your camcorder is equipped with automatic white balance. However,
under certain conditions, such as recording an object with various shades of the same
color or when recording a predominant red or brown object outdoors, you may want to
adjust white balance manually.
MAN.W.BAL
SNAP
SHOT
Button
SP•SLP
TRACKING
ER R/M
+
FF
L
PLAY/PAUSE
W.BAL.
STOP
REW
–
+
B
C
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
3. Press the MAN.W.BAL (manual
white balance) button until one of
the manual white balance indicators
appears in the viewfinder.
Auto White Balance
During auto white balance, the
camcorder will automatically adjust the
white balance.
• Select MWB when shooting
subjects with different color
temperatures and adjust the white
balance as follows:
1. Place the POWER switch in CAMERA.
2. Place the mode select dial in AUTO
Note: Connecting your camcorder to
a color TV monitor may be helpful
when making white balance
adjustments.
Manual White Balance
1. Place the POWER switch in CAMERA.
2. Place the mode select dial in
MANUAL.
(continued on next page)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Press the MAN.W.BAL (Manual White Balance) Button to Display in Viewfinder
MWB
Auto White Balance
Manual White Balance
Outdoors — Sunny
Halogen or Tungsten
Light
Outdoors — Cloudy
A.Point camcorder at a white, flat
object such as a piece of white
paper.
• Select
when recording
outdoors on a sunny day.
• Select when recording
outdoors on a cloudy day.
B. Press and hold MAN.W.BAL for at
least three seconds.
• Select
halogen or tungsten lighting.
when recording using
The MWB indicator will flash
while the camcorder is adjusting
white balance and stop flashing
when it is ready to record.
Note: To change the tint for special
recording, substitute colored paper
for white. The white balance is
adjusted based on the color.
4. To have camcorder automatically
control white balance, repeatedly
press MAN.W.BAL until no white
balance indicator appears in
viewfinder (or place mode select dial
in AUTO).
Red paper – deeper green
Blue paper – orange
Yellow paper – deeper purple
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Menu
The main recording menu lets you select and set several recording features:
Shift Zoom (digital zooming), Tele Macro (close-up), Gain Up (light adjustment),
Color Filter, Tape Length, Title, and Date/Time. The Sub Menu lets you turn the tally
light on or off, set interval and recording times for self-timer, animation, and time-
lapse recording, and set an ID number.
MENU Button
,
,
, and
Buttons (On
AUTO
H
S
U
Mode Select Dial)
BACKLIGHT
P
MENU
16X9
MANUAL
F
RONTLIGHT
Mode Select
Dial In
MANUAL
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
To Display the Recording Menu
1. Make sure the mode select dial is in
3. Press or on the mode select dial
to highlight the feature you want to
adjust.
MANUAL.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
4. Press or on the mode select dial
to select the option you want for that
feature.
5. Press MENU to exit the menu.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
Note: If you want to change another feature,
repeat steps 3 and 4.
Date/Time
Sub Menu
Recording Menu in Viewfinder
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Menu — Tape Time-Remaining Display
The approximate time remaining on the tape in the camcorder is automatically
displayed in the viewfinder. The Tape Length feature in the recording menu must be
set correctly for the length tape you are using before the camcorder can correctly
calculate time remaining.
30min
SP•SLP
Switch
30min
29min
TAPE END
SNAP
SHOT
3min
SP•SLP
TRACKING
ER R/M
+
L
PLAY/PAUSE
W.BAL.
STOP
FF
REW
–
+
B
C
2min
(Flashing)
JLIP
VCR
POWER
OFF
CAMERA
1min
(Flashing)
AUDIO
RF
DC OUT
BATT. RELEASE
0min
(Flashing)
VIDEO
Set the Tape Length
• Select T20 if you are using a tape
with 20 minutes recording time in
SP speed.
1. Make sure the mode select dial is in
MANUAL.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
• Select T30 if you are using a tape
with 30 minutes recording time in
SP speed.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
• Select T40 if you are using a tape
with 40 minutes recording time in
SP speed.
5. Press MENU to exit the menu.
Date/Time
Sub Menu
Notes: The time-remaining indicator will
start flashing when the remaining tape time
reaches two minutes.
3. Press or on the mode select dial
to highlight Tape Length.
TAPE END appears when the tape reaches its
end during recording or a cassette is loaded
with its tape already at the end.
4. Press or on the mode select dial
to select the length of tape you are
using:
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Zooming
You can zoom in and out for close ups or wide-angle shots just by sliding the zoom
lever on the camcorder or pressing the button on the remote. The camcorder can
automatically focus when you zoom at most distances.
If you want to record a close-up of a small subject closer than three feet, you can turn
on the Tele Macro feature in the recording menu. This feature allows you to record a
small subject at a distance of approximately 23 inches.
You can extend the amount of zooming by 5 or 14 times the normal zoom using the
Shift Zoom feature in the recording menu.
Zoom Lever
MENU
Button
SNAP
SHOT
START
/STOP
START/STOP
SELF
Zoom
Buttons
(T and W)
VISS
T
ZOOM
TIME LAPSE
ZOOM
ANIM.
SELF
MBR
SET
INT.
TIME
REC
INT.
A
U
T
O
H
W
S
TIME
TIME
U
B
A
C
K
LIG
H
T
P
TIME LAPSE
PLAY
STOP
REW
REW
F
FWD
VCR
A.DUB
MENU
F
RO
N
T
L
HT
MA
N
U
A
L
REC
TIME
16X9
AE MODE
S
PLAY
PAUSE
STOP
INSERT
ANIM.
PAUSE
EIS
PHOTO
TS
E
FF
EC
DATE/
TIME
FADE
WIPE
CANCEL REC/PAUSE
IN
OUT
ON
OFF
FF
RANDOM ASSEMBLY EDIT
INSERT
A.DUB
Model CC639’s Remote
Mode Select
Dial In
,
,
, and
Buttons (On
Mode Select Dial)
MANUAL
Model CC638’s Remote
Using the Zoom Lever
1. To zoom in or our, slide the zoom
lever on the camcorder or press the
button on the remote.
The zoom level indicator appears in the
viewfinder.
• To move the lens in the telephoto
(close-up) direction, slide the zoom
lever toward T.
W
• To move the lens in the wide angle
T
direction, slide the lever toward W.
Zoom speed varies on the camcorder
according to how far you zoom in or out.
Zoom Indicator
in Viewfinder
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Menu — Tele Macro Zooming Feature
To Turn on Tele Macro
1. Make sure the mode select dial is in
3. Press or on the mode select dial
MANUAL.
to highlight Tele Macro.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
4. Press or on the mode select dial
to select OFF or uON.
• Select uON if you want to record a
small subject within approximately
23 inches.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
• Select OFF for normal zooming.
5. Press MENU to exit the menu.
Date/Time
Sub Menu
Note: Depending on the position of the
zoom, the lens may go out of focus.
Recording Menu — Shift Zoom (Zoom Magnification)
To Set the Zoom Ratio
4. Press or on the mode select dial
1. Make sure the mode select dial is in
to select OFF, u50x or u140x zoom
MANUAL.
magnification.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
• Select OFF for normal zooming.
• Select u50x to zoom up to 50
times the normal size.
• Select u140x to zoom up to 140
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
times the normal size.
5. Press MENU to exit the menu.
Date/Time
Sub Menu
3. Press or on the mode select dial
to highlight Shift Zoom.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Menu — Gain Up (Slow Shutter)
The gain up feature allows you to take bright and natural recordings even in areas
with low or poor lighting.
MENU Button
,
,
, and
Buttons (On
AUTO
H
S
Mode Select Dial)
U
B
A
C
K
LIG
H
T
P
MENU
16X9
MANUAL
F
R
O
N
T
LIG
H
T
AE MODES
EIS
Mode Select
Dial In
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
MANUAL
To Set Gain Up
Notes: Shooting a subject in low or
poor lighting at 1/30 second shutter
speed provides a brighter image than in
the AGC mode, but the subject’s
movements are not as smooth or
natural.
1. Make sure the mode select dial is in
MANUAL.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
When the LIGHT OFF/AUTO/ON
A
switch is in ON or AUTO, the
is
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
disabled.
• Select uOFF when lighting is not a
problem.
Date/Time
Sub Menu
• Select AGC to have recording
appear brighter and movements
more natural and smooth than when
recording in the auto (u A ) mode.
However, the overall appearance
may be “jagged”.
3. Press or on the mode select dial
to highlight Gain Up.
4. Press or on the mode select dial
5. Press MENU to exit the menu.
A
to select u
, uOFF, or AGC.
A
• Select u
to have the shutter
speed automatically adjusted from
1/30 to 1/60 second.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Menu — Color Filter
This feature allows you to record adding a red or blue tint to the recording.
MENU Button
,
,
, and
Buttons (On
AUTO
H
S
Mode Select Dial)
U
B
A
C
K
LIG
H
T
P
MENU
16X9
MANUAL
F
R
O
N
T
LIG
H
T
AE MODES
EIS
Mode Select
Dial In
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
MANUAL
To Set Color Filter
4. Press or on the mode select dial
1. Make sure the mode select dial is in
to select NOR., uRED, or uBLUE.
MANUAL.
• Select NOR. for normal recording
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
• Select uRED to add a reddish tint to
your recording.
• Select uBLUE to add a bluish tint to
your recording.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
5. Press MENU to exit the menu.
Date/Time
Sub Menu
3. Press or on the mode select dial
to highlight Color Filter.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Menu — Title
The title feature lets you choose one of eight preset titles or create your own title —
up to 18 characters. The clock cell battery must be installed as shown on page 55
before you can create or store your own title.
MENU Button
,
,
, and
Buttons (On
AUTO
H
S
Mode Select Dial)
U
B
A
C
K
LIG
H
T
P
MENU
16X9
MANUAL
F
R
O
N
T
LIG
H
T
AE MODES
EIS
Mode Select
Dial In
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
MANUAL
To Add a Preset Title to Your Recordings
1. Make sure the mode select dial is in
4. Press on the mode select dial to
display the title menu.
MANUAL.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
OFF
Happy Birthday
Happy Holidays
Congratulations
Our Family
Someone Special
Vacation
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
Super Star
First
(Set Character)
Date/Time
Sub Menu
5. Press or on the mode select
dial to highlight the preset title you
wish to use.
3. Press or on the mode select dial
6. Press MENU to display the title in
the viewfinder. It will be
superimposed on your tape during
recording.
to highlight Title.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
To Create Your Own Title
1. Make sure the mode select dial is in
7.Press
,
,
, or on the mode
MANUAL.
select dial to highlight the character
you wish to use.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
8.Press MENU to enter the character in
your title.
9.Repeat steps 7 and 8 until you have
completed your title (up to 18
characters).
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
SET:MENU KEY
A B C D E F G H I
J K L M N O P Q R S
T U V W X Y Z Ä Ö Ü
Date/Time
Sub Menu
` ` ` ` `
A E I O U Ñ Æ ø Å &
?
: . ,
- / ! ?
¤
’
0 1 2 3 4 5 6 7 8 9
TAYLOR IS ONE!
3. Press or on the mode select dial
End
Clear
to highlight Title.
Note: To correct a character, highlight the
character you want to correct, highlight the
character you want to replace it with, and
press MENU.
4. Press on the mode select dial to
display the title menu.
OFF
10.When you are finished, press
,
,
Happy Birthday
Happy Holidays
Congratulations
Our Family
Someone Special
Vacation
, or on the mode select dial to
highlight End.
11.Press MENU to return to the title
Super Star
First
menu, or press MENU twice to
(Set Character)
remove all menus from the screen and
display and record your title.
5. Press or on the mode select dial
to highlight (Set Character).
To Turn Off a Title
6. Press on the mode select dial to
display the set character menu.
1.Display the title menu and use the
or on the mode select dial to
highlight OFF.
SET:MENU KEY
A B C D E F G H I
J K L M N O P Q R S
T U V W X Y Z Ä Ö Ü
OFF
` ` ` ` `
A E I O U Ñ Æ ø Å &
Happy Birthday
Happy Holidays
Congratulations
Our Family
Someone Special
Vacation
?
: . ,
- / ! ?
¤
’
0 1 2 3 4 5 6 7 8 9
Super Star
End
Clear
First
(Set Character)
Note: If you wish to erase a previous title,
highlight Clear, and press MENU.
2.Press MENU to remove the title menu
from the screen.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Menu — Date/Time Display
The date and time must be set before it can be displayed and recorded on your
tapes. The clock cell must be installed as shown on the next page before the date
can be set and recorded.
MENU Button
,
,
, and
Buttons (On
AUTO
H
S
Mode Select Dial)
U
B
A
C
K
LIG
H
T
P
MENU
16X9
MANUAL
F
R
O
N
T
LIG
H
T
AE MODES
EIS
Mode Select
Dial In
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
MANUAL
To Set the Date and Time
1. Make sure the mode select dial is in
5. Press or to enter the correct
month. Press to go forward or
to go back.
MANUAL.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
6. Press on the mode select dial to
start the day flashing.
7. Repeat steps 5 and 6 to set the year,
hour (including AM and PM), and
minutes.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
8. Press or to highlight Set.
Date/Time
Sub Menu
9. Press the MENU button. The
camcorder’s internal clock will start
and you will return to the recording
menu.
3. Press or on the mode select dial
to highlight Date/Time.
Notes: Press MENU twice to start the
clock and remove all the menus from
the viewfinder.
4. Press on the mode select dial to
display the date and time screen.
If you enter an invalid date, Input Error
appears in the viewfinder. Press
, or and enter the correct day.
,
,
JAN 1.00 AM 12:01
Set
Cancel
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Date/Time Display — Install the Clock Lithium Cell
The clock cell indicator
will flash for a few seconds in the viewfinder when you
turn on the camcorder if the cell has not been installed or needs to be replaced.
Insert object here to remove cell.
Clock Cell
(+ Side Facing Out)
L
E
–
+
B
C
Clock Cell
VCR
Compartment
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
1. Make sure camcorder is turned off, and
remove any power supply attached to
the camcorder.
To remove battery
To remove battery, insert a pointed non-
metallic object between battery and
compartment and lift.
2. Press release tab of clock cell compart-
ment cover and open the compartment.
3. Insert the clock cell with the “+”
terminal facing out.
4. Close the compartment cover. It will
click into place.
Cautions: Lithium cell battery. Replace only with 3-volt lithium cell – such as
CR2025. Use of other cell presents a risk of fire or explosion. Must be disposed of
properly. Never handle punctured or leaking cell. May cause burns or personal
injury.
Keep out of the hands of children. Can cause death or injury if swallowed. If
swallowed, consult a physician immediately for emergency treatment.
The lithium cell used in this device may explode resulting in a fire or chemical burn if
mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the + and – sides
of the cell.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Date/Time Display
The clock cell must be installed and the date and time set before they can be selected
and recorded.
AUTO
H
S
U
B
A
C
K
LIG
H
T
P
MENU
16X9
MANUAL
F
R
O
N
T
LIG
H
T
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
DATE/TIME
Button
To Select the Date or Date and Time You Want to Record On Your Tape
1. Attach a power supply and place
POWER switch in CAMERA. The
power indicator will light.
• Date Display: The date will be
displayed and recorded.
• Time: The time will be displayed
and recorded.
2. Repeatedly press DATE/TIME to
select the date, time, or date and time
you want to record.
• Date and Time Display: The date
and time will be displayed and
recorded.
• Date and Time Off: No date or time
will be displayed or recorded.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Date/Time Display
Viewfinder Displays
Press DATE/TIME to select mode.
NOV 18.96
Date Display
Date and Time Off Display
PM 1:59:43
NOV 18.96
Time Display
Return to Date Display
NOV 18.96 PM 1:59:56
Date and Time Display
The mode selected will be recorded.
To Record the Date or Date and Time on Your Tape
1. Place the camcorder in record pause.
2. Repeatedly press the DATE/TIME
button to display the date, time, or
date and time you have previously
stored in the viewfinder.
5. To record the display again, place
the camcorder in record pause and
press the DATE/TIME button to select
the mode you want to record.
Note: If you do not want to record a date
or time, press DATE/TIME to select the date
and time off mode.
3. Begin recording.
4. Press the DATE/TIME button to
remove the display from the viewfinder
when you are finished recording it.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Menu — Sub Menu
The sub menu lets you turn the tally light on or off, set interval and recording times for
the self-timer, time-lapse recording, or animation recording. You can also set a JLIP
ID number for a device (such as a personal computer).
MENU Button
,
,
, and
Buttons (On
AUTO
H
S
Mode Select Dial)
U
B
A
C
K
LIG
H
T
P
MENU
16X9
MANUAL
F
R
O
N
T
LG
H
T
AE MODES
EIS
Mode Select
Dial In
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
MANUAL
Tally Light
To Change a Feature in the Sub Menu
1. Make sure the mode select dial is in
Tally
ON
MANUAL.
Interval Timer
Rec Time
OFF
OFF
0 7
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
JLIP ID NO.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
5. Press or on the mode select
dial to highlight the item you want to
adjust.
Date/Time
Sub Menu
6. Press on the mode select dial to
start the highlighted item flashing.
3. Press or on the mode select dial
7. Press or on the mode select
dial to adjust the highlighted item.
Press to stop the item flashing.
to highlight Sub Menu.
4. Press on the mode select dial to
display the sub menu.
Note: If you want to change another
feature, repeat steps 5, 6, and 7.
8. Press MENU to exit the menu, or
press to return to the main
recording menu.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Tally Light
To Turn the Tally Light ON or OFF
1. Follow steps 1-4 on the previous page.
3. Press on the mode select dial to start
Tally flashing.
2. Press or on the mode select dial
to highlight Tally.
4. Press or on the mode select dial
to turn the tally light ON or OFF.
• Select ON to have the tally light
Tally
ON
turn on during recording.
Interval Timer
Rec Time
JLIP ID NO.
OFF
OFF
0 7
• Select OFF if you do not want the
tally light to light.
5. Press to stop Tally flashing.
6. Press MENU to exit the menu.
Set the JLIP ID NO.
The camcorder has a JLIP (Joint Level Interface Protocol) connector that may be
used in the future to connect a device, such as a home computer.
To Select a JLIP ID NO.
1. Follow steps 1-4 on the previous page.
3. Press on the mode select dial to start
JLIP ID NO. flashing.
2. Press or on the mode select dial
to highlight JLIP ID NO.
4. Press or on the mode select dial
to a number from 01 to 99.
Tally
ON
5. Press to stop JLIP ID NO. flashing.
Interval Timer
Rec Time
JLIP ID NO.
OFF
OFF
0 7
6. Press MENU to exit the menu.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Self-Timer
The self-timer lets you set the camcorder to delay recording so you can be
in the scene when recording begins.
MENU
Button
Tally
ON
15S
30S
A
U
T
O
Interval Timer
Rec Time
JLIP ID NO.
OFF
OFF
0 7
H
S
U
B
A
C
K
LIG
H
T
P
MENU
F
RO
N
T
LI
HT
MA
N
U
A
L
16X9
AE MODE
S
EIS
PHOTO
TS
E
FF
EC
DATE/
TIME
FADE
WIPE
1min
5min
Tally Light
Interval Timer Options
Mode Select
Dial In
MANUAL
,
,
, and
Buttons (On
Mode Select Dial)
To Set the Self-Timer
1. Place the POWER dial in CAMERA.
4. Press or on the mode select dial
The power indicator will light.
to highlight Sub Menu.
2. Place mode select dial in MANUAL.
5. Press on the mode select dial to
display the sub menu.
3. Press the MENU button. The
recording menu will appear in the
viewfinder.
6. Press or on the mode select dial
to highlight Interval Timer.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
Tally
ON
Interval Timer
Rec Time
JLIP ID NO.
OFF
OFF
0 7
Date/Time
Sub Menu
7. Press on the mode select dial to
start Interval Timer flashing.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
8. Press or on the mode select
dial to select the amount of time you
want the recording delayed.
• Select 15S to delay the recording
for 15 seconds.
10.Press MENU to exit the menu.
and
the amount of delayed recording time
appear in the viewfinder.
5min
• Select 30S to delay the recording
for 30 seconds.
PAUSE
• Select 1min to delay the recording
for one minute.
• Select 5min to delay the recording
for five minutes.
• Select OFF if you do not want the
camcorder to delay recording.
Self-Timer Indicator
in Viewfinder
11. Press the thumb trigger to start
recording.
9. Press to stop Interval Timer
flashing.
Note: The tally light flashes. About five
seconds before recording begins, the tally
light will start flashing faster.
Self-Timer — Using Remote
SNAP
SHOT
START
/STOP
START/STOP
SELF
START/STOP
Button
START/STOP
Button
TIME LAPSE
SELF INT/TIME
Button
ZOOM
VISS
INT.
TIME
T
TIME
LAPSE
SELF
INT/TIME
Button
TIME LAPSE
ZOOM
ANIM.
SELF
MBR
SET
TIME LAPSE
PLAY
STOP
REW
REC
INT.
W
TIME
TIME
REC
TIME
REW
F FWD
PAUSE
VCR
A.DUB
ANIM.
PAUSE
PLAY
STOP
INSERT
FF
CANCEL REC/PAUSE
IN
OUT
ON
OFF
INSERT
A.DUB
RANDOM ASSEMBLY EDIT
Model CC639’s Remote
Model CC638’s Remote
1. Place the POWER dial on the
camcorder in CAMERA. The power
indicator will light.
amount of delayed recording time
appear in the viewfinder.
3. Press the START/STOP button to start
2. Press the TIME LAPSE SELF
recording.
INT./TIME button.
and the
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Sub Menu — Animation Recording
Animation recording produces an illusion of movement for an otherwise stationary
scene or object by shooting a series of pictures of slightly different poses (such as
cartooning).
Tally
ON
MENU
Button
Interval Timer
Rec Time
JLIP ID NO.
OFF
OFF
0 7
1/4S
1/2S
A
U
T
O
H
S
U
B
A
C
K
LIG
H
T
P
MENU
F
R
O
N
T
LI
H
T
MA
N
U
A
L
16X9
AE MODE
S
EIS
PHOTO
TS
E
F
F
E
C
DATE/
TIME
F
ADE
WIPE
1S
5S
Recording Time Options
Mode Select
Dial In
MANUAL
Tally Light
,
,
, and
Buttons (On Mode
Select Dial)
To Record Using Animation
Tally
ON
1. Place the POWER dial in CAMERA.
Interval Timer
Rec Time
JLIP ID NO.
OFF
OFF
0 7
The power indicator will light.
2. Place mode select dial in MANUAL.
3. Press the MENU button. The
recording menu will appear in the
viewfinder.
6. Press or on the mode select dial
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
to highlight Rec Time.
7. Press on the mode select dial to start
Rec Time flashing.
Date/Time
Sub Menu
8. Press or on the mode select dial
to select the amount of time you want
the camcorder to record.
4. Press or on the mode select dial
• Select 1/4S, 1/2S, 1S, or 5S to have
the camcorder record for 1/4
second, 1/2 second, one second, or
five seconds.
to highlight Sub Menu.
5. Press on the mode select dial to
display the sub menu.
• Select OFF to turn off the
recording time.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
11.Press the thumb trigger to start
recording.
9. Press to stop Rec Timer flashing.
10.Press MENU to exit the menu.
the amount of recording time appear
in the viewfinder.
and
Note: The recording stops automatically
after the selected period of recording
time. You may want to take two to five
shots of the subject in the same position.
12.Move the subject and repeat step 11
for the desired number of shots.
1/4S
PAUSE
Animation Recording — Using the Remote
START/STOP
Button
TIME LAPSE ANIM.
START/STOP
REC/TIME Button
Button
START/STOP
SNAP
SHOT
START
/STOP
ZOOM
SELF
INT.
TIME
VISS
TIME LAPSE
PLAY
T
TIME LAPSE
REC
ZOOM
TIME
LAPSE
ANIM.
REC/TIME
Button
ANIM.
SELF
MBR
SET
TIME
REC
INT.
ANIM.
PAUSE
W
TIME
TIME
STOP
REW
REW
F FWD
PAUSE
VCR
A.DUB
FF
PLAY
STOP
INSERT
INSERT
A.DUB
CANCEL REC/PAUSE
IN
ON
OFF
OUT
RANDOM ASSEMBLY EDIT
Model CC638’s Remote
Model CC639’s Remote
1. Place the POWER dial on the
amount of recording time appear in
the viewfinder.
camcorder in CAMERA. The power
indicator will light.
3. Press the START/STOP button to start
2. Press the TIME LAPSE ANIM.
recording.
REC/TIME button.
and the
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Sub Menu — Time-Lapse Recording
Time-lapse recording makes automatic recordings at preset time intervals. The
recording will show subtle changes (such as shifts in cloud formations or plant growth)
when it remains focused on an object.
MENU
Button
Tally
ON
A
U
T
O
15S
30S
H
Interval Timer
Rec Time
JLIP ID NO.
OFF
OFF
0 7
S
U
B
A
C
K
LIG
H
T
P
MENU
F
RO
N
T
LIG
HT
MA
N
U
A
L
1/4S
1/2S
16X9
AE MODE
S
EIS
PHOTO
TS
E
FF
EC
DATE/
TIME
FADE
WIPE
1min
5min
Mode Select
Dial In
MANUAL
Tally Light
1S
5S
Sub Menu with
Interval Timer &
Rec Time Options
,
,
, and
Buttons (On
Mode Select Dial)
To Record Using Time Lapse
8.Press or on the mode select dial
to select the amount of time you want
the camcorder to record.
1. Place the POWER dial in CAMERA.
The power indicator will light.
• Select 1/4S, 1/2S, 1S, or 5S to have
the camcorder record for 1/4
second, 1/2 second, one second, or
five seconds.
2. Place mode select dial in MANUAL.
3. Press the MENU button. The record-
ing menu will appear in the viewfinder.
• Select OFF to turn off the
recording time.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
OFF
OFF
AGC
NOR.
T20
9.Press to stop Rec Time flashing.
10.Press or on the mode select dial
Date/Time
Sub Menu
to highlight Interval Timer.
11.Press on the mode select dial to
start Interval Timer flashing.
4. Press or on the mode select dial
12.Press or on the mode select dial
to select the amount of time you want
between recordings.
to highlight Sub Menu.
5. Press on the mode select dial to
display the sub menu.
• Select 15S, 30S, 1min, or 5min to
set the intervals between recording
to 15 seconds, 30 seconds, one
minute, or five minutes.
6. Press or on the mode select dial
to highlight Rec Time.
7. Press on the mode select dial to start
Rec Time flashing.
• Select OFF to turn off the Interval
Timer.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
15.Press the thumb trigger to start
recording.
13.Press to stop Interval Timer flashing.
14.Press MENU to exit the menu.
and
Notes: The camcorder will start and stop
recording the selected amount of time.
the amount of recording time, and
and the amount of interval time appear
in the viewfinder.
The tally light flashes with the flash speed
increasing five seconds before recording
begins.
5min
1/4S
PAUSE
Time-Lapse Recording — Using the Remote
START/STOP
Button
TIME LAPSE ANIM.
START/STOP
REC/TIME Button
Button
START/STOP
SNAP
SHOT
START
/STOP
TIME
LAPSE
SELF
INT./TIME
ZOOM
SELF
INT.
TIME
VISS
TIME
LAPSE
SELF
INT./TIME
Button
TIME LAPSE
PLAY
T
TIME LAPSE
REC
TIME
ZOOM
ANIM.
SELF
MBR
SET
Button
REC
INT.
ANIM.
PAUSE
W
TIME
TIME
STOP
REW
REW
F FWD
PAUSE
VCR
A.DUB
TIME
LAPSE
ANIM.
REC/TIME
Button
FF
PLAY
STOP
INSERT
INSERT
A.DUB
CANCEL REC/PAUSE
IN
OUT
ON
OFF
RANDOM ASSEMBLY EDIT
Model CC638’s Remote
Model CC639’s Remote
3. Press the TIME LAPSE SELF
1. Place the POWER dial on the
camcorder in CAMERA. The power
indicator will light.
INT./TIME button.
and the interval
time appear in the viewfinder.
4. Press the START/STOP button to start
2. Press the TIME LAPSE ANIM.
recording.
REC/TIME button.
and the
amount of recording time appear in
the viewfinder.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Fading or Wiping In and Out
You can add a professional touch to your recordings when you use the fade or wipe
features. The picture gradually appears on a black or white screen and disappears
leaving a black or white screen. The speed of the fade or wipe is automatically
controlled by the camcorder.
AUTO
H
S
U
BACKLIGHT
P
Mode Select Dial
MENU
16X9
MANUAL
FRONTLGHT
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
FADE/WIPE Button
To Fade or Wipe
1. Place the POWER dial in CAMERA.
• Mode Select Dial in MANUAL
The power indicator will light.
Press the FADE/WIPE button to
2. Place mode select dial in AUTO or
display the fade/wipe menu.
MANUAL.
• Mode Select Dial in AUTO
OFF
BK
C
Black Fader
Blue Fader
Mosaic Fader
Door Wipe
1
2
3
4
5
6
7
8
Press the FADE/WIPE button to turn
the black fader on or off.
BK
appears in the viewfinder.
Scroll Wipe
Window Wipe
Dissolve
Note: This is the only fade you can use
in AUTO.
P
Auto Select
– –
Note: The fade/wipe menu will not appear if
the Shift Zoom magnification feature on the
recording menu is turned on.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Note: If you select a fade or wipe
during recording, press the thumb trigger
to fade or wipe out.
3. Press FADE/WIPE to highlight the
fade or wipe you want to select.
Note: The fade or wipe you select is
automatically activated and the fade/wipe
menu is removed from the viewfinder in
approximately two seconds.
To Turn Off Fade or Wipe
Press FADE/WIPE to highlight OFF.
Note: The fade or wipe will be turned off
and the menu will automatically be removed
from the viewfinder in approximately two
seconds.
4. Press the thumb trigger to start
recording and fade or wipe in.
Indicator
Menu
Function
Fades in or out on a black screen.
Black Fader
BK
C
Fades in or out on a blue screen.
Blue Fader
Mosaic Fader
Door Wipe
Fades in or out with a full screen mosaic effect.
Wipes in from a black screen opening to the sides.
Wipes out from the center towards the sides
leaving a black screen.
Wipes in from a black screen from the bottom to
the top. Wipes out from the top to the bottom
leaving a black screen.
Scroll Wipe
Window Wipe
Dissolve*
Wipes in from a black screen from the center out
to the corners. Wipes out from the corners toward
the center leaving a black screen.
New scene gradually appears as the old one
dissolves. You must stop and start recording
within five minutes.
P
The camcorder automatically selects one of 6
wipes when you start recording.
Auto Select*
– –
* The Dissolve and Auto Select modes require a previous scene stored in memory. The
indicator for the mode selected will flash in the viewfinder if there is no stored image.
You must stop and start recording within five minutes without turning off the camcorder’s
power or the stored scene will be erased.
The sound for the last recorded scene is not stored in memory.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Production Effects
You can add a professional touch to your recordings when you use some of the
production effects while recording.
AUTO
H
S
U
B
A
C
K
LIG
H
T
P
Mode Select Dial
MENU
16X9
MANUAL
F
R
O
N
T
LIG
H
T
AE MODES
EIS
PHOTO
EFFECTS
DATE/
TIME
FADE
WIPE
16X9/AE MODES Button
To Use a Production Effect
Note: The production effects are
described on the next page.
1. Place the POWER dial in CAMERA.
The power indicator will light.
3. Press 16X9/AE MODES to highlight
2. Place mode select dial in AUTO or
the effect you want to select.
MANUAL.
• Mode Select Dial in AUTO
Note: The effect you select is
automatically activated and the menu is
removed from the viewfinder in
approximately two seconds.
Press the 16X9/AE MODES button
to turn the Cinema mode on or off.
appears in the viewfinder.
Note: This is the only production effect
you can use in AUTO.
4. Press the thumb trigger to start
recording with the effect you selected.
• Mode Select Dial in MANUAL
Notes: When Sepia or Classic Film effects
are activated, pressing MAN.W.BAL has no
effect.
Press the 16X9/AE MODES button
to display the production effect
menu.
When Slow Shutter is activated, auto focus
may not function properly.
OFF
When Slow Shutter is activated, bright spots
may appear on the screen.
1
2
3
4
5
6
7
8
Cinema
Sepia
Sports
Certain effects cannot be used together with
other functions. When an effect not suitable
in the current situation is selected, its
indicator flashes in the viewfinder.
Back–Lit
Front–Lit
Classic Film
Strobe
Slow Shutter
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
To Turn Off a Production Effect
Note: The effect will be turned off and the
menu will automatically be removed from the
viewfinder in approximately two seconds.
Press 16X9/AE MODES to
highlight OFF.
Indicator
Menu
Function
Cinema
The camcorder records black bars at the top and
bottom of the picture to produce the wide-screen
effect. This is also known as “letter box” recording.
Use when you play back your recordings on a 16X9
TV.
Sepia
Gives your recording a brownish tint like old photos.
Combine with cinema mode for a classic look.
Use to clearly capture fast-moving action with less
blurring. Use when playing back the recording on a
VCR featuring special effects, such as pause or slow
motion.
Sports
Use when the subjects are in front of a window or
with the sun to their back. Compensates for subjects
appearing too dark because of backlighting.
Back–Lit
Front–Lit
Classic Film
Strobe
Use when there is a strong front light on the subject
such as spotlights. Compensates for subjects
appearing too light because of strong front lighting.
Faster strobe images in black-and-white that offer
the vintage look of a film being shown on a movie
projector. Use it with cinema mode to add an
authentic movie theater look.
Your recording looks like a series of snapshots.
Light sensitivity lets you light dark subjects or areas
brighter than they would be under good natural
lighting. Use only in dark areas. Your picture takes
on a strobe-like effect. If the image is out of focus,
adjust the focus manually. The manual focus
Slow Shutter
indicator may flash. Use a tripod for better stability.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Audio Dubbing (Remote Only)
Audio dubbing lets you record new sound (audio) in place of previously
recorded audio.
COUNTER R/M Button
SNAP
SHOT
PLAY/PAUSE
Button
SP•SLP
ER R/M
W.BAL.
TRACKING
+
L
PLAY/PAUSE
STOP
FF
REW
–
+
B
C
REW Button
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
POWER Switch in VCR
To Audio Dub
5. Press COUNTER R/M again for less
than one second to turn on memory
stop (M).
1. Place the tape with safety tab intact
into the camcorder.
2. Place POWER switch in VCR.
6. Press REW, locate the place you want
audio dubbing to begin, and press
PLAY/PAUSE (PAUSE on remote)
exactly at the beginning of the scene.
3. Locate the place you want the audio
dubbing to stop and press
PLAY/PAUSE (PAUSE on remote).
4. Press COUNTER R/M for more than
two seconds on the camcorder to set
the time counter back to 0:00:00.
(continued on next page)
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
SNAP
SHOT
START
/STOP
VISS
T
REW
Button
TIME LAPSE
A. (Audio)
DUB
Button
ZOOM
ANIM.
SELF
MBR
SET
REC
INT.
W
TIME
TIME
REW
F FWD
PAUSE
VCR
A.DUB
PAUSE
Button
PLAY
STOP
INSERT
START/STOP
SELF
PLAY
Button
CANCEL REC/PAUSE
ZOOM
STOP
Button
IN
OUT
ON
OFF
INT.
TIME
RANDOM ASSEMBLY EDIT
PLAY
Button
STOP
Button
TIME LAPSE
PLAY
STOP
REW
REC
TIME
ANIM.
PAUSE
PAUSE
FF
Button
Model CC639’s Remote
REW
Button
INSERT
A.DUB
A. (Audio)
DUB Button
Model CC638’s Remote
7. Press and hold A.DUB while pressing
and releasing PAUSE on the remote to
place the camcorder in audio dub
8. Press PLAY on the remote to start
audio dubbing.
appears in the
viewfinder.
standby.
appears in the
viewfinder.
The new audio will be recorded in
place of the old audio.
When the counter reading of
M 0:00:00 is reached, audio dubbing
stops, and the camcorder enters audio
dub standby.
9. Press STOP to end audio dubbing.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Edit Insert (Remote Only)
Edit insert lets you record new video in place of previously recorded video without
replacing the audio.
COUNTER R/M Button
SNAP
SHOT
PLAY/PAUSE
SP•SLP
TRACKING
ER R/M
Button
+
FF
L
PLAY/PAUSE
W.BAL.
STOP
REW
–
+
B
C
REW Button
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
POWER Switch in VCR
To Edit Insert
1. Place the tape with safety tab intact
into the camcorder.
5. Press COUNTER R/M again for less
than one second to turn on memory
stop (M).
2. Place POWER switch in VCR.
3. Locate the place you want the edit
insert to stop and press PLAY/PAUSE
(PAUSE on remote).
6. Press REW, locate the place you want
edit insert to begin, and press
PLAY/PAUSE (PAUSE on remote)
exactly at the beginning of the scene.
4. Press COUNTER R/M for more than
two seconds on the camcorder to set
the time counter back to 0:00:00.
(continued on next page)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
SNAP
SHOT
START
/STOP
VISS
T
TIME LAPSE
ZOOM
REW
Button
ANIM.
SELF
MBR
SET
REC
INT.
W
TIME
TIME
REW
F FWD
PAUSE
VCR
A.DUB
PAUSE
PLAY
STOP
INSERT
STOP
Button
Button
CANCEL REC/PAUSE
IN
OUT
ON
OFF
PLAY
Button
RANDOM ASSEMBLY EDIT
START/STOP
SELF
INSERT
Button
ZOOM
PLAY
Button
INT.
TIME
TIME LAPSE
PLAY
STOP
REW
Model CC639’s Remote
REC
TIME
ANIM.
PAUSE
STOP
Button
PAUSE
Button
FF
REW
Button
INSERT
A.DUB
INSERT
Button
Model CC638’s Remote
8. Press START/STOP on remote (thumb
7. Press and hold INSERT while
pressing and releasing PAUSE on the
remote to place the camcorder in edit
PAUSE
trigger on camcorder) to start edit
insert.
appears in the viewfinder.
New video is recorded over the
previous video. When the counter
reading of M 0:00:00 is reached, edit
insert stops and the camcorder enters
edit standby.
insert standby.
and
appear in the viewfinder.
PAUSE
9. Press STOP to end edit insert.
Notes: The camcorder may stop slightly
before or after the edit out point and there
may be slight distortion at this point.
If a fade/wipe effect was used during edit
insert, wait ten seconds after pressing
STOP to perform other operations.
To check your tape positioning, you
can press EDIT SEARCH – or + on
the camcorder.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Built-In Color Enhancement Light
The built-in color enhancement light will automatically add more light when needed.
The POWER switch must be in CAMERA to operate the video light.
Built-In Video Light
AUTO
H
S
U
B
A
C
K
LIG
H
T
P
MENU
16X9
MANUAL
F
R
O
N
T
LIG
H
T
AE MODES
EIS
PHOTO
EFFECTS
LIGHT OFF•AUTO•ON
Button
DATE/
TIME
FADE
WIPE
To Use the Light
Set the LIGHT OFF•AUTO•ON switch.
• Set to ON to turn the light on.
Note: We recommend you set white
Cautions:
balance to the indoor mode (
using the light.
) when
Do not operate the video light closer
than one foot to people or other
objects.
• Set to AUTO to have the light come on
automatically when the camcorder
senses there is insufficient light for the
best recording.
The video light becomes very hot. Do
not touch it during operating or right
after using it. Serious injury may
result.
Notes: If the lighting condition is unstable
the light may turn on and off. Set the light
to ON or OFF.
Do not place the camcorder in a
carrying case right after using the light.
The light may stay on during high speed
shutter recording.
• Set to OFF to turn the light off. Turn
Never operate the video light close to
flammable or explosive material.
the light off when you are not
recording to save battery power.
Note: When the light is turned on, the
camcorder may turn off if the battery’s power
is low even though the battery level indicator
is not flashing.
(continued on next page)
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Replacing the Bulb
We recommend you consult your dealer or Servicenter to replace the bulb. If you
replace the bulb, use only part #233430 to replace the entire bulb assembly. Carefully
follow the instructions below.
Cautions
The video light and bulb need to cool for approximately 30 minutes after the
camcorder has been used before the bulb assembly is replaced.
Do not touch the light bulb with your fingers. If the bulb is accidentally
touched, wipe it with a soft cloth. A dirty bulb may cause smoke and have a
reduced service life.
To Replace the Bulb Assembly
T
Bulb Assembly
1. Pull on the sides of the bulb assembly and remove it from the camcorder as shown.
New Bulb
Assembly
2. Place the the new bulb assembly into the camcorder as shown.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Attaching the Shoulder Strap
The camcorder’s shoulder strap is designed to let you carry the camcorder from your
shoulder and – when you are ready to shoot – bring the camcorder to shooting position
in one quick movement.
To Attach the Shoulder Strap
4. Attach the other end of the strap to the
other shoulder strap attachment ring.
1. If the strap keeper is
over a double section
of the strap, slide the
strap keeper off the
end of the strap.
Replace the keeper
on the strap between
the buckle and the
end of the strap as
shown.
–
+
B
C
Keeper
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
2. Loop the end of the strap over the top
of the shoulder strap attachment ring.
5. Adjust the shoulder strap to the desired
length.
6. Slide both keepers up snugly against
the shoulder strap attachment rings to
prevent the strap from slipping.
Keeper
Buckle
–
+
B
C
Cautions: When carrying the
camcorder with the shoulder strap,
you may find it convenient to rotate
the viewfinder down and slide it to
the front. This helps prevent
possible damage to the viewfinder
from bumping against your body as
you move.
VCR
POWER
OFF
CAMERA
Attachment
Rings
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
3. Thread the end of the strap back
through the keeper and buckle making
sure it is threaded under the outer
strap. Make sure the strap is not
twisted.
Make sure the shoulder strap is
firmly attached before using it to
carry the camcorder.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Traveling Tips
• Write down your camcorder’s serial
number and keep it separate from the
camcorder when traveling. If your
camcorder is lost or stolen, you will be
able to identify it.
• Make sure you have any plug adapters
that you may need before taking your
camcorder to other countries. Consult
your dealer for advice.
• Carry your camcorder in a carrying
case when traveling. See page 92 for a
case designed especially for this
camcorder. An ordinary suitcase or
carry bag does not offer the protection
your camcorder needs. Treat your
camcorder as carry-on luggage to
protect it from rough handling.
• Use extra care to avoid damage to your
camcorder and accessories when
operating them at a beach or pool.
Spray, sand, and dust should be
avoided. If your lens has been exposed
to the elements, clean it only with
proper lens cleaning supplies.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Using the Cassette Adapter
The camcorder uses a smaller size cassette, but records in standard VHS format. The
cassette adapter allows you to play your VHS-C cassettes in a VCR just like other
standard VHS cassettes.
Insert the VHS-C cassette into the cassette adapter. Insert the cassette adapter into the
VHS VCR like a normal VHS cassette.
Install Cassette Adapter’s Battery
Battery
Compartment
Cover
1. Remove battery compartment cover.
Notes: Replace the battery when the load
time becomes much longer than normal.
2. Install supplied “AA” battery so
positive (+) and negative (–) ends
align properly with (+) and (–)
terminals in battery compartment.
Remove the battery from the cassette adapter
if it will not be used for a month or more.
This will prevent possible damage from
battery leakage. If leakage occurs, wipe up
the liquid inside the compartment and replace
the battery with a new one.
3. Replace battery compartment cover.
Insert Cassette into Cassette Adapter
Cassette
Compartment
Lid
Tape Wheel
EJECT Switch
1. Before inserting the cassette into the
adapter, remove any slack in the tape
by turning the tape wheel on the side
of the cassette.
3. Insert the cassette with the tape
window on the left and facing up.
Allow the cassette to drop into the
adapter. Do not force the cassette.
2. Slide EJECT to the right to open the
cassette compartment lid.
(continued on next page)
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Load Detector
4. Gently close the cassette compartment
lid until it locks into place. Make sure
the cassette reel area under the adapter
is free to turn while the cassette is
loading.
Caution: If the load detector is still
extending from the side of the cassette
adapter after you have attempted to load
the cassette, loading is not complete.
Try to load the cassette again.
Note: You should hear a whirring sound
while the tape loads. The adapter’s load
detector will automatically retract into the
adapter.
Attempting to insert the cassette adapter
into a VCR with the load detector
extending may cause damage to the
adapter and/or VCR.
Remove Cassette from Cassette Adapter
Access Hole
1. Slide the adapter’s EJECT switch to
the right. The load detector will
extend from the side and the whirring
sound indicates the tape is being
released before the adapter’s cassette
compartment lid opens.
2. Use the access hole on the bottom of
the adapter to push the cassette up and
remove it from the adapter.
3. Gently close the adapter’s cassette
compartment lid.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Viewfinder Playback
Viewfinder playback is the simplest way to watch tapes using the
camcorder.
SNAP
SHOT
SP•SLP
TRACKING
ER R/M
PLAY/PAUSE
Button
+
FF
L
PLAY/PAUSE
W.BAL.
STOP
REW
EJECT
–
+
B
C
Button
STOP Button
FF Button
REW Button
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
POWER Switch in VCR
To Play Back a Tape
1. Place POWER switch in VCR. The
During playback, use the playback
power indicator will light.
features on the next pages.
2. Slide EJECT and insert the cassette
you want to play back. Close the
cassette compartment.
4. Press STOP when you are finished.
3. Press PLAY/PAUSE to begin playback.
If necessary, adjust tracking.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback Features
SNAP
SHOT
START
/STOP
START/STOP
SELF
ZOOM
VISS
INT.
PLAY
Button
T
TIME
F FWD Button
TIME LAPSE
TIME LAPSE
ZOOM
PLAY
STOP
REW
ANIM.
SELF
MBR
SET
REC
TIME
REC
INT.
W
TIME
TIME
ANIM.
PAUSE
STOP
Button
REW
F FWD
PAUSE
VCR
A.DUB
PAUSE
Button
REW Button
FF
REW
PLAY
STOP
INSERT
FF
Button
Button
PLAY Button
INSERT
A.DUB
CANCEL REC/PAUSE
STOP Button
IN
OUT
ON
OFF
PAUSE Button
RANDOM ASSEMBLY EDIT
Model CC638’s Remote
Model CC639’s Remote
Visual Searching
Tape Positioning
• During playback, press and release FF
(F FWD on remote) or REW if you
want to search the tape visually in
forward or reverse.
Place POWER switch in VCR and press
STOP.
• Press and quickly release REW or FF
(F FWD on remote) to rewind or fast-
forward the tape.
• Press PLAY/PAUSE on the camcorder
(or PLAY on the remote) to return to
normal playback.
• Press STOP to stop the tape.
• For brief searching, press and hold FF
(F FWD on remote) or REW for more
than two seconds.
• Release the button to return to normal
playback.
Stop-Action Pause
• During playback, press PLAY/PAUSE
(or PAUSE on remote) to “stop the
action” and view one frame of the tape.
Caution: Pause is designed for momentary
interruptions and should not be used for an
extended period of time. If the camcorder
remains in pause for more than five minutes,
it will automatically enter the stop mode and
then turn off to prevent excessive tape wear.
• Press PLAY/PAUSE on the camcorder
(or PLAY on the remote) to return to
normal playback.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback Features (Continued)
COUNTER R/M Button
SNAP
SHOT
SP•SLP
ER R/M
W.BAL.
TRACKING
+
L
PLAY/PAUSE
STOP
FF
REW
EJECT
–
+
B
C
Button
STOP Button
JLIP
VCR
POWER
OFF
CAMERA
REW Button
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
POWER Switch in VCR
Thumb Trigger
Time Counter
The time-counter display shows the actual time elapsed when playing back a segment
of tape. The memory-stop feature helps locate a certain point on the tape. When
memory stop is on, the tape will stop automatically during rewind or fast forward
when the time counter reaches M 0:00:00.
To Use the Memory-Stop Feature
1. Locate the place on the tape you want
to return to, place the POWER switch
in VCR, and press COUNTER R/M for
more than two seconds to reset the
counter to 0:00:00.
2. Continue to play the tape. When you
want to return to the place you marked,
press the STOP button.
3. Press REW. The tape will rewind to
the time counter reading of M 0:00:00.
M 0:00:00
Time Counter With
Memory Stop Turned On
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback Features (Continued)
TRACKING Buttons
SNAP
SHOT
SP•SLP
ER R/M
W.BAL.
TRACKING
+
L
PLAY/PAUSE
STOP
FF
REW
–
+
B
C
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
RF
DC OUT
BATT. RELEASE
VIDEO
Tracking
During playback, streaks may appear in the playback picture. Press either
TRACKING button to move the streaks up or down and out of the picture.
Note: The TRACKING buttons may have no
effect on tapes recorded on other camcorders
or VCRs.
• During stop-action playback, pressing
one TRACKING button may reduce
picture “jitter” (picture bouncing up
and down). Some “jitter” is normal.
Simultaneously press both TRACKING
buttons to return tracking to its preset
center.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks
To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,
you will need an optional audio/video cable such as VH83 shown on page 94.
If your TV is already connected to a VCR, you can attach the camcorder to the VCR
and watch what the camcorder is recording or playing on the TV.
Back of
Mono VCR or
TV Monitor
SNAP
SHOT
1 White
Audio Plug
Audio/Video
Output Cable
(Optional)
AUDIO
IN
–
+
B
C
AUDIO Jack
VIDEO
IN
3
JLIP
VCR
POWER
OFF
CAMERA
2
Yellow Video Plug
4
AUDIO
OR
RF
BATT. RELEASE
DC OUT
VIDEO
Back of
Stereo VCR or
TV Monitor
1 White
Audio
Plug
Y-Adapter
(Optional)
Audio/Video
Output Cable
(Optional)
L
AUDIO
IN
3
VIDEO Jack
R
VIDEO
IN
4
2
Yellow Video Plug
Installation
2 Attach the yellow plug to the VIDEO
1 Attach the white plug on one end of
the audio/video cable to the AUDIO
IN jack on the TV (or VCR).
IN jack on the TV (or VCR).
3 Attach the white plug on the other end
of the audio/video cable to the AUDIO
jack (located under the small cover)
on the back of the camcorder.
Notes: If your cable does not have white
and yellow plugs, just be sure to attach the
same color to the audio jacks.
If your TV (or VCR) has stereo AUDIO IN
jacks, attach the plug to the one labeled
MONO. If one is not labeled MONO, you
may need a Y-adapter, such as AH25,
shown on page 94 to hear both channels.
4 Attach the yellow plug to the yellow
VIDEO jack on the camcorder.
(continued on next page)
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Playback
Playback Operation and How to Copy Tapes on the VCR
1. A. Camcorder connected directly to
TV: Turn on the TV and tune it to
the video input channel.
• During playback, use the playback
features on pages 81-82.
4. To copy what the camcorder is playing,
place a blank cassette in the VCR, and
press the VCR’s RECORD button.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line” or
“camera mode”. (If your VCR does
not have a “line” or “camera
Notes: Press EDIT to start camcorder
playback when copying tapes to improve
picture reproduction.
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
Make sure the memory-stop feature is
turned off (press COUNTER R/M) or the
camcorder will enter play pause when the
counter reaches M 0:00:00.
coming from the VCR.
5. Press STOP when you are finished.
2. Place the POWER switch in VCR to
turn on the camcorder. The power
indicator will light.
Caution: The unauthorized recording
of copyrighted material may infringe
the rights of others.
3. Press PLAY/PAUSE.
• If noise bars appear on the screen,
press TRACKING – or +.
Viewing What the Camcorder is Seeing (or Recording)
1. A. Camcorder connected directly to
TV: Turn on the TV, and tune it to
the video input channel.
2. Place the POWER switch
in CAMERA.
Note: When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line” or
“camera mode”. (If your VCR does
not have a “line” or “camera
3. Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
Note: The remote control will operate the camcorder.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Model CC639 Only: Programming Remote to Operate
Compatible VCR
The CC639’s remote can be programmed to operate the camcorder and the basic
functions of a compatible VCR for easy tape editing. After the remote has been
programmed, you can control the VCR by pressing and holding VCR while
pressing one of the function buttons (REW, F FWD, STOP, PAUSE, or PLAY).
SNAP
SHOT
START
/STOP
MBR SET Button
VISS
T
TIME LAPSE
ZOOM
Press for number 1.
ANIM.
SELF
MBR
SET
REC
INT.
W
TIME
TIME
Press for number 2.
Press for number 3.
REW
F FWD
PAUSE
VCR
A.DUB
PLAY
STOP
INSERT
VCR Button
(Press for number 7.)
Press for number 4.
CANCEL REC/PAUSE
IN
ON
OFF
OUT
Press for number 8.
Press for number 9.
Press for number 5.
Press for number 6.
RANDOM ASSEMBLY EDIT
Press for number 0.
Remote Control
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Refer to the chart below to find the code numbers that correspond to your brand of
VCR. Try each two-digit code number separately until you find the correct one. Press
the buttons on the remote corresponding to the code numbers.
1. Turn on the VCR.
4. Test the code number by pressing and
holding VCR while pressing one of the
function buttons (REW, F FWD, STOP,
PAUSE, or PLAY). If the VCR does
not perform the function, repeat step 3
with another code number.
2. Make sure the lithium cell is installed
in the remote. The remote will need
to be reprogrammed when you
change the lithium cell.
3. Press and hold MBR SET while
pressing two digits for the code.
Then release MBR SET.
Chart of VCR Code Numbers
VCR Brand *
RCA
Code(s)
02, 04, 09, 87, 88
02, 04, 09, 22
01, 07, 08
03,22, 52, 58
28
GE
JVC
Magnavox
Zenith
Panasonic
Sharp
04, 22, 25, 28, 27
23, 29
Toshiba
Hitachi
Mitsubishi
Akai
80, 82
87, 88
85, 86
81, 84
Sony
Sanyo
NEC
70, 72, 83, 89
50, 73, 78, 79
75, 76
* The remote may not be able to control
every model VCR of the brands listed.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Model CC639 Only: Copying Tapes Using Programmable Synchro Edit
You can program the camcorder with up to eight segments of a prerecorded tape.
The camcorder will automatically copy these segments on a compatible VCR.
5. Locate the beginning of the first
SNAP
SHOT
START
/STOP
segment you want to program. The
edit screen appears on the TV.
VISS
T
TIME LAPSE
ZOOM
ANIM.
SELF
MBR
SET
REC
INT.
W
TIME
TIME
6. Press IN/OUT to enter the time counter
REW
F
FWD
VCR
A.DUB
reading in the display.
PLAY
PAUSE
STOP
INSERT
CANCEL REC/PAUSE
7. Locate the end of the segment, and
press IN/OUT to enter the time counter
reading in the display.
IN
OUT
ON
OFF
ON/OFF
RANDOM ASSEMBLY EDIT
Button
REC/PAUSE
Button
IN/OUT
Button
8. Repeat steps 5-7 to enter each segment
(up to eight). TOTAL shows recording
time for all the segments.
CANCEL Button
1. Connect the camcorder to a VCR as
IN
OUT
shown on pages 84-85 .
1 0:10:00 0:12:30
2 0:22:00 0:25:00
3 --:--:--
2. Insert the prerecorded tape in the
camcorder. Place the POWER switch
in VCR.
4
5
6
7
8
3. Turn on VCR and place it in the “line”
or “camera mode”. (If your VCR does
not have a “line” or “camera mode”,
consult the VCR owner’s manual.)
Operate the TV as you normally do to
see the signal coming from the VCR.
COUNTER
TOTAL
0:25:00
0:05:30
Display in Viewfinder and
on TV Screen
9. Press CANCEL to erase the last IN or
OUT point. Each press will erase the
last entry.
4. Playback the pre-recorded tape and
then, press RANDOM EDIT on the
camcorder or ON/OFF on remote.
The edit screen will appear in the
viewfinder.
10. Connect one end of the edit cable
(supplied) to the JLIP jack on the
camcorder and the other end to the
VCR or remote.
IN
OUT
1 --:--:--
• If the VCR has a 3.5 mm EDIT,
EDIT IN, EDIT IN/OUT, SYNC, or
PAUSE jack, attach the small plug to
the jack.
Note: If the VCR’s jack is not 3.5 mm,
you will need an adapter.
2
3
4
5
6
7
8
COUNTER
TOTAL
0:00:00
0:00:00
• If the VCR does not have a small
jack, attach the plug on the other end
Display in Viewfinder
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Copying Tapes Using Programmable Synchro Edit
IN/OUT Button
SP•SLP
COUNTER R/M
IN/OUT
TRACKING
RANDOM
EDIT Button
EDIT
CANCEL RANDOM EDIT
MAN.W.BAL
EDIT
SEARCH
–
+
REW
FF
STOP PLAY/PAUSE
SNAP
SHOT
IN/OUT
SP•SLP
ER R/M
W.BAL.
EDIT Button
CANCEL Button
TRACKING
CANCEL
RANDOM EDIT
EDIT
+
PLAY/PAUS
STOP
FF
REW
Back of
VCR
Connected
to TV
–
+
B
C
Optional
Audio/Video
Cable
White
Audio Plug
JLIP
VCR
POWER
OFF
CAMERA
AUDIO
IN
VIDEO
IN
AUDIO
RF
DC OUT
BATT. RELEASE
Yellow
Video Plug
EDIT
IN
VIDEO
To
JLIP
Jack
OR
Attach edit cable
to EDIT, EDIT IN, EDIT IN/OUT,
SYNC, or PAUSE jack on VCR.
Edit
Cable (Supplied)
Attach edit
SNAP
SHOT
START
/STOP
cable to jack
on remote
control.
VISS
T
TIME LAPSE
ZOOM
ANIM.
SELF
MBR
SET
REC
INT.
W
TIME
TIME
REW
F
FWD
VCR
A.DUB
Caution: Do not attach any other
PLAY
PAUSE
STOP
INSERT
CANCEL REC/PAUSE
IN
ON
cable to the remote jack.
OUT
OFF
RANDOM ASSEMBLY EDIT
of the edit cable to the small jack on
the remote.
13. After all the programmed scenes have
been copied, the camcorder will enter
play pause, and the VCR will enter
record pause. Press STOP on the
camcorder and VCR to end
11. Point the remote at the VCR’s remote
sensor and press REC/PAUSE. The
VCR will enter record pause. If the
VCR does not enter record pause,
place it in record pause using the
VCR’s controls.
programmable synchro edit.
Notes: To copy the tape from a specified
location to the end, just enter one IN
point. The camcorder will copy
everything from that point to the end of
the tape.
Note: The remote must be programmed
for your brand of VCR as shown on pages
86-87.
A segment must be over one second in
length and have at least 15 seconds of
recording before it on the tape.
12. Press EDIT on the camcorder. The
programmed scenes will be copied.
Notes: Keep the remote aimed at the
VCR’s remote sensor.
Search time between segments cannot be
over five minutes.
The display will be superimposed on the
TV screen while the camcorder searches
forward for the next scene.
IN and OUT points cannot be blank
portions of tape.
To ensure correct operation, leave at least
15 seconds open between scenes.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback on a TV Without Audio/Video Inputs
To connect your camcorder to a TV without audio/video inputs, you will need an
optional 1CVA147C RF output adapter and an optional coaxial RF cable, such as VH82
or VH90 shown on page 94. If your TV has AUDIO and VIDEO IN jacks (or is
connected to a VCR), refer to pages 84-85.
VHF Antenna
SNAP
SHOT
Optional Coaxial
RF Cable
SP•SLP
C
TRA
ER R/M
W.BAL.
1
REW
(such as VH82 or VH90)
–
+
B
C
OR
Back of TV
JLIP
VCR
VHF
2
POWER
OFF
CAMERA
OR
AUDIO
Optional
Transformer
(Such as VH54)
RF
DC OUT
BATT. RELEASE
VHF
VIDEO
AUDIO, RF DC
OUT, VIDEO Jacks
3
2
OR
OUT TO TV Connector
RF Output
Adapter's Plug
Optional
300-75 Ohm
VCR/TV Switch
Transformer
IN FROM ANT
Connector
Optional RF Output Adapter
(1CVA147C)
CH3/CH4 Switch
Installation
1 Disconnect the VHF antenna from
your TV. Connect the antenna to the
IN FROM ANT connector on the RF
output adapter if you are going to leave
the adapter connected to the TV.
2 Attach one end of the optional coaxial
RF cable to the OUT TO TV
connector on the adapter, and attach
the other end to the VHF input on
your TV as shown.
Note: If your VHF antenna is the flat
twin-lead type attached by two screws,
you will also need an optional 300/75 ohm
transformer.
Note: If your TV has 300 ohm screw
terminals, you will need a 75/300 ohm
transformer, such as VH54, shown on
page 94.
3 Attach the RF output adapter’s plug to
the AUDIO, RF DC OUT, and
VIDEO jacks located under the small
cover on the back of the camcorder.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback Operation
5. Press PLAY/PAUSE on the camcorder.
1. Set the CH3/CH4 switch on the RF
output adapter to channel 3 or 4.
• During playback, use the playback
features described on pages 81-82.
2. Turn on the TV, and tune it to the
same channel you selected with the
RF output adapter’s CH3/CH4 switch.
• If noise bars appear on the screen,
adjust tracking as described on
page 83.
3. Place adapter’s VCR/TV switch in
VCR.
6. Press STOP on the camcorder when
you are finished.
4. Place POWER in VCR. Power
indicator will light.
Viewing What the Camcorder Is Recording
1. Turn on the TV and tune it to channel
3 or 4. When the camcorder is used as
a camera, turn the TV’s volume down
to prevent a high-pitched squeal
caused by feedback.
2. Set the CH3/CH4 switch on the RF
output adapter to the same channel
you selected on the TV.
3. Place adapter’s VCR/TV switch in
VCR.
4. Place POWER in CAMERA. Power
indicator will light.
5. Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.
Note: The remote will also operate the camcorder.
Normal TV Viewing
For normal TV viewing, you may leave
the RF output adapter hooked up to the
TV. Disconnect the adapter’s plug from
the camcorder and place the adapter’s
VCR/TV switch in TV.
Note to Cable TV Installer
This reminder is provided to call your attention to Article 820-40 of the
National Electrical Code (Section 54 of Canadian Electrical Code, Part I),
that provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the
building as close to the point of cable entry as practical.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
We invite you to take a look at some great ideas for sparking creativity
and adding to the fun of using your compact VHS camcorder. The
following pages have a selection of accessories to help make your
memorable moments look and sound even better.
These accessories are designed to make the process of recording and
watching your videos more enjoyable.
To order accessories, contact your local Dealer.
If a dealer is not nearby, all accessories are available through toll-free
ordering or by using the order form on page 95.
AC201A Soft Carrying Case
DCC08 Car Cord Adapter
Do not use
any other car
cord with this
camcorder.
This car cord adapter enables you to
Custom compact soft case designed
especially to provide protection and utility
for your compact VHS camcorder and
most accessories. Rugged fabric lined
with soft non-abrasive material and
generous padding. Has three outside
pockets with storage for lens filters,
adapters, batteries, and tapes.
operate your camcorder from your car,
truck, or RV by plugging the car cord
directly into the vehicle’s cigarette lighter
socket. The DCC08 is designed
specifically to convert power from a 12-
volt battery to a 6-volt output.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
FB1260 and FB120 Rechargeable
Batteries
Using the Optional AC088 Tripod
Mounting the camcorder on a tripod,
such as AC088, will keep the camcorder
steady and produce excellent video
results.
This tripod’s fluid-effect head provides
smooth camera pan and tilt. The quick-
release mount makes it easy to attach or
remove the camcorder. The grooved,
tubular 3-section leg design folds down to
26" when not in use. Rubber feet allow
for sure footing.
These rechargeable nickel-cadmium
batteries are designed specifically for long
life. The FB1260 is the same battery that
came packed with your camcorder. The
FB120 powers your camcorder twice as
long as the FB1260 (with video light off –
depending on how much you use zoom
and pause). Both can be recharged with
the AC adapter/charger that came with
your camcorder.
A
U
T
O
H
S
U
B
A
C
K
L
IG
H
T
P
ME
N
U
F
R
O
N
T
L
IG
H
T
M
A
N
U
A
L
16X9
AE
MO
D
E
S
EIS
P
H
O
T
O
E
F
F
E
C
T
S
D
A
T
E
/
F
A
W
D
IP
E
T
IME
E
CPS91 AC Battery Charger
The CPS91 battery charger plugs directly
into an AC outlet and charges the FB1260
and FB120 camcorder batteries. Because
the CPS91 operates on 100-240 Volts,
50/60 Hz, it can be used virtually
anywhere in the world. A plug adapter
may be required in some countries.
Charging takes approximately seven hours
for the FB1260 (1-hour battery) and 13
hours for the FB120 (2-hour battery).
Cautions: Before using a tripod, make sure it is
stable enough to hold the camcorder without
falling over. Do not transport the camcorder
attached to the tripod.
When attaching your camcorder to a tripod, be
careful not to force the tripod screw into the
camcorder’s tripod mounting hole.
All specifications and
descriptions of accessories are
subject to change without notice.
The tripod screw should not protrude into the
camcorder more than approximately three-eighth
(3/8) inch. Forcing the screw could damage the
mounting hole on the bottom of the camcorder.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
1CVA147C RF Output Adapter
VH54 Cable Transformer
This 75-to-300 ohm transformer is used to
connect a standard 75-ohm antenna cable
(such as VH82 or VH90) to the 300 ohm
screw terminals on a TV.
This RF output adapter is used with a
coaxial RF cable, such as VH82 or VH90,
to connect your camcorder to a standard
TV (one without audio/video inputs) for
playback. If your antenna cable is the flat
twin-lead type attached by two screws,
you will also need a 300-to-75 ohm
transformer. If your TV has 300 ohm
antenna screw terminals, you will need an
optional 75-to-300 ohm transformer such
as VH54.
VH83 Audio/Video Cable
This six foot audio/video dubbing cable
can be used for copying tapes from the
camcorder to another VCR or camcorder.
Coaxial RF Cables
VH82 (6-ft)
VH90 (12-ft)
AH25 Y-Adapter
These RF cables are used with the RF
output adapter to connect your camcorder
to a standard TV (one without
audio/video input jacks) for playback.
If your TV has 300 ohm antenna screw
terminals, you will need an optional
75-to-300 ohm transformer such as
VH54. If your antenna cable is the flat
twin-lead type attached by two screws,
you will also need an optional 300-to-75
ohm transformer.
This Y-adapter allows you to connect
your camcorder’s mono audio cable to a
stereo TV or VCR.
All specifications and descriptions of accessories
are subject to change without notice.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form
Order Form for Camcorder Model CC638/CC639
Description
Part No.
AC088
AC201A
ACS091
AH25
Price
Qty. Total
Super Lightweight Tripod
Soft Camcorder Case
Shoulder Strap
$ 39.95
$ 39.95
$ 12.95
Y-Adapter
$
2.95
AC Battery Charger
Car Cord Adapter
Rechargeable Battery (Extended)
Rechargeable Battery (Standard)
75-300 Cable Transformer
Coaxial RF Cable
CPS91
DCC08
FB120
FB1260
VH54
VH82
VH83
VH90
$ 59.95
$ 89.95
$ 89.95
$ 49.95
$
$
$
$
2.95
6.95
5.95
7.95
Audio/Video Cable
Coaxial RF Cable
RF Output Adapter
1CVA147C $ 59.95
Model CC638: Remote Control
Model CC639: Remote Control
AC Adapter/Charger
and
221125
221337
221400
$ 39.95
$ 49.95
$ 96.45
DC Cable
233087
$ 24.95
Cassette Adapter
Model CC639: Edit Cable
Bulb Assembly
232845
233088
233430
$ 49.95
$ 13.95
$ 44.95
Prices are subject to change without notice.
Total Merchandise...........................................................$__________
Sales Tax.........................................................................$__________
We are required by law to collect the appropriate
sales tax for each individual state, county, and
locality to which the merchandise is being sent.
Shipping and Handling....................................................$
5.00
Total Amount Enclosed ................................................$__________
Use VISA, MasterCard, or Discover.
Money order or check must be in U.S.
currency only. No COD or cash.
Please complete other side also
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form
Charge your order on your VISA,
MasterCard, or Discover Card by
filling in below
USE YOUR CREDIT CARD
®
IMPORTANT: Copy complete account number
from your VISA card
My card expires:
s
r
r
TM
IMPORTANT: Copy complete account number
from your MasterCard
Copy Number
above your
name on
My card
expires:
MasterCard
IMPORTANT: Copy complete account number
from your Discover Card
My card expires:
AUTHORIZED SIGNATURE
Prices are subject to change without notice.
Print or type your name and
address clearly. This will be
your mailing label.
A complete and correct
order will save you days
of waiting.
Name:
Street:
Apt:
City:
State:
Zip:
Please make sure that both sides of this form
have been filled out completely.
• Allow 4 weeks for delivery.
• All accessories are subject to availability.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form
To order accessories, contact your local Dealer.
If a dealer is not nearby, you can also follow the directions below to order by
telephone or direct-by-mail.
United States and Canada Orders
To place your order by phone, have your Visa, MasterCard, or Discover card
ready and call the toll-free number listed below between 8AM and 8PM (EST)
Monday through Friday or between 9AM and 5PM (EST) Saturday.
Use this number only to place an order for accessory items listed on
this order form.
1 – 800 – 338 – 0376
To place your order by mail, detach and mail the completed order form with
credit card information, money order, or check in U.S. currency (made payable
to Thomson Consumer Electronics, Inc.) to the following address:
Video Accessories
PO Box 8419
Ronks, PA 17573
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Troubles sometimes are caused by simple “faults” that you can easily correct without
the help of a service technician by first checking a few basic remedies.
Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter,
look below for the type of trouble you are experiencing. Then perform the simple
checks and adjustments listed for that trouble.
If service should be necessary, the warranty information lists what your warranty
covers and explains how to get service.
Trouble
Checks and Adjustments
No power
• Place the POWER switch in CAMERA or VCR to turn on
the camcorder. The power indicator will light.
• If using battery, it may need to be recharged.
• If using AC adapter/charger, make sure it is plugged into a
working outlet.
Won’t record or
playback
• If using AC adapter/charger, make sure it is plugged into a
working outlet.
• If the dew indicator ( ) flashes in the viewfinder, there is
moisture in the camcorder. Wait until the dew indicator no
longer appears before operating the camcorder.
• Make sure POWER switch is in correct position for desired
operation.
• There may not be a cassette in the camcorder.
• Try ejecting and reinserting the cassette.
• The cassette tape may be broken, try another cassette.
• You may have reached the end of the cassette, try
rewinding it.
Won’t playback
Won’t record
• POWER switch must be in VCR position.
• Safety tab has been removed or closed. (See page 24.)
• POWER switch must be in CAMERA.
No picture
• Open lens cover.
Camcorder turns
itself off
• Place POWER switch to OFF and then CAMERA or VCR
to turn back on. If camcorder is left in record pause or play
pause for several minutes, it will turn itself off to prevent
tape wear.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Trouble
Checks and Adjustments
• Aim remote at camcorder’s remote control sensor.
• Remote’s lithium cell battery may be installed incorrectly.
See pages 17 and 22.
Camcorder does not
respond to remote
control
• Remote control’s lithium cell battery may need replacing.
• Remote control sensor on camcorder exposed to direct
sunlight or strong artificial light.
• Time-counter memory may be on. Whenever an “M”
appears with the time-counter display, the camcorder will
stop rewinding (or fast forwarding) when counter reads
M 0:00:00. Press REW or FF again to continue
rewinding or fast forwarding, or press COUNTER R/M to
turn off the memory-stop feature.
Tape stops during
rewind or fast
forward
• Press PLAY/PAUSE to return to normal playback.
Camcorder remains
in pause mode
• Subject was too far from camcorder.
Sound is too low or
distorted
• If the dew indicator ( ) flashes in the viewfinder, there
is moisture in the camcorder. Wait until this indicator no
longer appears before operating the camcorder.
Dew Indicator
flashing in
viewfinder
• Subject is dark or behind glass. Auto-focus may not
work under these conditions. Place mode select dial in
MANUAL and focus manually. See pages 38-39.
• Subject is not in center of viewfinder or two subjects are
at different distances. Place mode select dial in
MANUAL and focus manually. See pages 38-39.
• Auto focus is automatically turned off when some effects
are selected with the production special effects menu.
See pages 68-69.
Poor auto-focus
operation
(continued on next page)
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Trouble
Checks and Adjustments
Viewfinder displays
are out of focus
• Lens is smudged, and image appears unfocused.
• Eyepiece focus control is misadjusted.
• Model CC639: The small controls on the bottom of the
viewfinder control the brightness (B) and color (C) of the
viewfinder. These controls have been set at the factory and
should require no adjustment. If the brightness or color of
the viewfinder ever does require adjustment, carefully use a
plastic screwdriver. Make the adjustments with caution to
prevent damaging the miniature controls.
Picture is too dark
or subject too dark
• For best results, only use higher shutter speeds outdoors.
Press 16X9/AE MODES button to select sports ( ). See
pages 68-69.
• Place mode select dial in MANUAL and press
FRONTLIGHT or BACKLIGHT. See page 37.
• Turn on the built-in color enhancement light.
Picture recorded
with special effect
(black bars at top
and bottom)
• Special effect selected. Press the 16X9/AE MODES button
to display the production effects menu and select OFF.
• If the mode select dial is in AUTO, press the 16X9/AE
MODES button to turn off the Cinema mode.
See pages 68-69.
Picture recorded in
brown tone
• SEPIA ( ) selected on production effects menu. Press the
16X9/AE MODES button to display the production effects
menu and select OFF.
Colors do not look
natural on recording
• Try adjusting white balance. See pages 44-45.
• Turn off Color Filter in main recording menu.
See page 51.
Title recorded on
tape
• Title is recorded whenever it appears in viewfinder.
Remove the title from viewfinder. See pages 52-53.
Date and/or time
were recorded on
tape
• Displays will be recorded on tape whenever they appear in
the viewfinder. Remove them from viewfinder when
recording. See pages 56-57.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
Trouble
Checks and Adjustments
Date and/or time are
incorrect
• Clock lithium cell battery may need replacing. See page 55.
• Date or time may need to be set. See page 54.
Vertical white lines
appear when shoot-
ing bright object
• This may occur when background extremely contrasts with
the subject.
Error number
(E01, E02, E03,
etc.) appears in
viewfinder
• Try disconnecting power source. Wait ten seconds and then
connect power source again. If error number does not
disappear from viewfinder, consult your Authorized RCA
Camcorder Servicenter.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
Cleaning the Camcorder
To clean the camcorder’s exterior,
remove any power source connected to
the camcorder and gently wipe it with a
clean soft cloth.
Caution: Use of strong cleaning
products, such as those containing
alcohol or benzine, may damage
the camcorder.
Cleaning the Camcorder’s Lens
To clean the camcorder’s lens, blow it with a blower brush, and then
gently wipe the lens with cleaning tissue and commercially prepared
cleaning solution designed for use on camera lens. Improper cleaning
may scratch the lens.
Caution: Do not
A
U
T
O
H
S
U
B
A
C
K
LIG
H
T
P
touch the lens with
your fingers. The
oil from your skin
can damage the
lens.
MENU
F
R
O
N
T
LIG
H
T
MA
N
U
A
L
16X9
AE MODE
S
EIS
PHOTO
TS
E
F
F
E
C
Lens
DATE/
TIME
FADE
WIPE
Cleaning the Camcorder’s Viewfinder
The viewfinder eyepiece can be removed for cleaning.
1. Turn the eyepiece
counterclockwise and pull it out.
2. Remove dust using a blower brush.
3. Reattach the eyepiece by aligning
the reference marks, and then turn
the eyepiece clockwise until it
clicks.
Reference
Marks
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
Proper Care and Storage
• The camcorder can be damaged by
improper storage or handling. Do not
subject the camcorder to swinging,
shaking, or dropping.
• Keep dust and grit from entering the
camcorder’s cassette door. Dust and
grit are abrasive and will cause
excessive wear to both the camcorder’s
recording/playback heads and cassettes.
• Do not store the camcorder in
temperatures below -22°F (-30ºC) or
above 149°F (65ºC).
• Always close the lens cover when the
camcorder is not in use.
• When the camcorder is not in use,
always remove the cassette and
AC adapter/charger or battery.
• Before handling your camcorder, make
sure your hands and face are free from
any chemical products such as suntan
lotion, as it may damage the finish.
• Retain the original carton for future
storage or shipping purposes.
Things to Avoid
• Do not operate the camcorder near the
ocean as salt water or salt water spray
may damage the internal parts of the
camcorder.
• Do not operate the camcorder for
extended periods in temperatures below
40°F (4ºC) or above 95°F (35ºC).
• Do not expose the camcorder or
adapter/charger to rain or moisture. If
either component becomes wet, turn off
the power and take the unit to an
Authorized RCA Camcorder
• Do not attempt to disassemble your
camcorder. There are no user-
serviceable parts inside.
• Avoid operating your camcorder
immediately after moving it from a cold
location to a warm location. Give the
camcorder 1-1/2 to 2 hours to reach a
stable temperature before inserting a
cassette. When the camcorder is
moved from cold to warm,
condensation may cause the tape to
stick to the headwheel and damage the
headwheel or tape.
Servicenter.
• Do not use an adapter/charger or
batteries other than the ones specified
for the camcorder. Use of the wrong
accessories may cause damage to the
camcorder.
• Do not aim your camcorder at the sun
or other bright objects.
• Do not leave your camcorder in direct
sunlight for extended periods of time.
The resulting heat buildup could
permanently damage the camcorder’s
internal parts.
• Do not operate the camcorder in
extremely humid environments.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Information to User
This equipment has been tested and
found to comply with the limits for a
Class B digital device and RF lighting
device pursuant to Part 15 and part 18 of
the FCC Rules. These limits are
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
designed to provide reasonable protection
against harmful interference in a
• Increase the separation between the
equipment and receiver.
residential installation. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this
• Connect the equipment into an outlet on
a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Alterations or modifications carried out
without appropriate authorization may
invalidate the user’s FCC right to operate
the equipment.
equipment does cause harmful
interference to radio or television
reception, which can be determined by
This Class B digital apparatus meets all requirements of the
Canadian Interference — Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Réglement sur le matériel brouilleur du Canada.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Assistance and Service
Thomson provides a toll-free telephone
You can reach Thomson at the
following number:
number to help you with any problems
you may encounter with your camcorder.
Many can be diagnosed over the phone,
and if necessary, a replacement unit can
be shipped to you. Please have your
camcorder model/serial number and date
of purchase ready when you call. If your
unit is out of warranty, we will quote the
cost of an exchange unit to you.
800-283-6503
(Toll free inside U.S.A.)
Our toll-free Camcorder number
operates from 8 a.m. to 5 p.m., CST
Monday – Friday
for U.S. customers only
Returning equipment to Thomson for repair or exchange
If we are unable to resolve your problem
over the phone, we will gladly service
your unit or exchange it for a new or
refurbished camcorder. Refer to the
limited warranty on the reverse side to
learn about your specific rights and
responsibilities.
Always consult Thomson and get a
Return Authorization number before
returning anything! Obtain a Return
Authorization (RA) number from the
telephone representative before returning
your equipment to avoid delays,
accounting errors, or even loss of your
unit.
Important information to customers who ship defective equipment to
Thomson Consumer Electronics
The Thomson representative who
authorized the return of your equipment
will give you an RA number over the
phone. They will also provide you with
instructions on where and how to return
your camcorder. Write the number in
large, clear characters on the outside of
the box. To avoid confusion and
and model/serial number of your
camcorder. These numbers are located
on the bottom of your unit. If your
camcorder is within the warranty period,
please provide a copy of the bill of sale
to verify purchase date. Use the original
box and packing material to protect the
equipment from damage in shipment.
misunderstandings, shipments without an
RA number clearly visible on the outside
of the box will be returned to you at your
expense.
For your protection, insure all shipments
for full replacement value and use a
reliable shipper. Thomson assumes no
responsibility for warranty shipments
from the customer to the factory if not
shipped in the manner prescribed by
Thomson.
Include a brief note describing the
problem and any conversations about the
problem you have had with Thomson
personnel. Include your name, address
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
What your warranty covers:
• Any defect in materials or
workmanship.
which validates date of purchase to
the exchange location and you will be
provided the new or refurbished unit.
4. If the repairs were covered by your
warranty, you will not be billed.
For how long after your purchase:
• 90 days for labor charges.
• One year for parts.
If you are not located near an exchange
point:
What we will do:
1. Provide your Discover, MasterCard or
Visa account number and expiration
date to our phone representative. This
is for security purposes. If we receive
your unit including all accessories
within 14 days from the date you were
provided a Return Authorization
number, only items not covered by
warranty will be charged to your
account. IF YOUR UNIT
During the initial 90 days
• Exchange your camcorder with a new
or, at our option, a refurbished unit or
at your option, repair your camcorder
at no cost to you.
After the 90 days and within one year
• Exchange your camcorder with a new
or, at our option, a refurbished unit or
at your option, repair your camcorder.
Parts will be provided at no charge,
but you will be responsible for the cost
of labor required for the repair.
INCLUDING ALL ACCESSORIES
IS NOT RECEIVED WITHIN 14
DAYS, THE SUGGESTED
RETAIL VALUE OF THE
CAMCORDER AND/OR
How you get service:
• Call 1-800-283-6503 and have your
unit’s date of purchase and
ACCESSORIES WILL BE
model/serial number ready. The
model/serial number information is on
the bottom of your camcorder.
CHARGED TO YOUR CREDIT
CARD. This amount will be credited
if the unit is subsequently received.
2. We will send you a replacement unit
next business day delivery.
3. You will receive an invoice packed
with the replacement product, but will
not be charged for the unit portion of
the invoice amount if we receive your
unit including all accessories within
14 days from the date you were
provided the RA number. Any labor
and parts charges not covered by our
warranty will be included and charged
against your account.
• A representative will troubleshoot
your problem over the phone. If the
representative determines that you
should receive a replacement unit, you
will be provided with a Return
Authorization (RA) number and the
location of a nearby exchange point if
one exists. No returns will be
accepted without the RA number.
To receive a replacement camcorder
before you return yours:
If you are located near an
exchange point:
1. We will send a replacement unit to the
exchange point next business day
delivery.
2. The exchange location will notify you
of its arrival.
3. Take your unit, including all
accessories, and your bill of sale
4. Ship the unit back to us along with all
accessories included with your
camcorder using the replacement
unit’s carton. Shipping instructions
will be included in the carton along
with your RA number, which will
allow you to easily ship the unit back
to us. Make sure you insure your
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
shipment in case of damage or loss.
Include with the shipment:
• A copy of your dated bill of sale to
verify your unit’s warranty
eligibility.
• A brief note describing your
camcorder problem.
To have your Camcorder repaired by
an Authorized RCA Camcorder
Servicenter:
• Check with your dealer or call 1-800-
336-1900 for the Authorized RCA
Camcorder Servicenter nearest you.
• Take your unit to the Authorized RCA
Camcorder Servicenter of your choice.
• Show the Authorized RCA Camcorder
Servicenter representative your sales
receipt or other, evidence of purchase.
• Pick up your camcorder when repairs
are complete.
• Your name, address and phone
number.
Return transportation, storage, and
handling costs and insurance are your
sole responsibility. We accept no
liability in case of damage or loss.
What your warranty does not cover:
• Adjustment of customer controls.
• Damage from misuse or neglect.
• A unit that has been modified or
incorporated into other products or is
used for institutional or other
commercial purposes.
• Battery for clock and other features.
• Cleaning of video/audio heads.
• Camcorders purchased or serviced
outside the U.S.A.
• Return transportation, storage and
handling costs of your unit,
including insurance for loss or
damage.
• Acts of God, such as but not limited to
lightning damage.
To receive a replacement unit after we
have received your unit:
1. Write the RA number on the outside of
the carton used to return the unit.
Make sure you insure your
shipment in case of damage or loss.
2. Carefully pack the unit along with all
accessories included with your
camcorder, using the original box and
packing material if possible.
3. Include with the shipment:
• A copy of your dated bill of sale to
verify your unit’s warranty
eligibility.
• A brief note describing your
camcorder problem.
• Your name, address and phone
number.
Product Registration:
• Please complete and mail the Product
Registration Card packed with your
camcorder. It will make it easier to
contact you should it ever be
Return transportation, storage, and
handling costs, and insurance are your
responsibility. We accept no liability in
case of damage or loss.
4. Include a cashier’s check or money
order for payment if there are any out
of warranty labor or parts charges
which were indicated by the
representative, and you elected not to
use your credit card.
5. Upon receipt of your product, a new or
refurbished unit will be shipped to you
next day delivery.
necessary. The return of the card is
not required for warranty coverage.
How State Law relates to warranty:
• This warranty gives you specific legal
rights and you may have other rights
that vary from state to state.
If you purchased your Camcorder
outside the United States:
• Contact your dealer for warranty
information.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Camera Section
Power requirement: 6VDC
Power consumption:
Image Sensor: 1/4" CCD Imager
Tripod Mount: One 1/4" x 20 threaded
hole
Lens: F1/1.2
14:1 (4.1-57.4 mm)
Filter Diameter: 46 mm
Model CC638: 5.7 watts (normal)
Model CC639: 5.9 watts (normal)
Weight: Model CC638: 1.74 lbs. (800g)
Model CC639: 1.7 lbs. (780g)
Dimensions – Including Viewfinder
Model CC638: 4-3/8"(W) x 4-1/2"(H) x 9"(D)
111 (W) x 113 (H) x 226(D) mm
AC Adapter/Charger
Power requirement: 100-240 V, 50/60 Hz.
Power consumption: 23 watts
Weight: .7 lbs. (320g)
Model CC639: 4-3/8"(W) x 4-1/2"(H) x 8-1/2"(D)
111 (W) x 113(H) x 206(D) mm
Dimensions: 6"(W) x 1.7"(H) x 2.7"(D)
150 (W) x 42(H) x 68(D) mm
Video Recorder Section
Format: VHS-C
Record/Playback System:
Four video record/playback heads
One flying erase head
Video Signal: EIA Standard NTSC
color
Viewfinder
Model CC638: .5" Black & White
Model CC639: .55" Color – 113K Pixel
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
16X9/AE MODES
Blue Fader . . . . . . . . . . . . . . . . . . . . . .67
Bulb Assembly, Replace for Light . . .75
Button . . . . . . . . . .9,26-27,30,68-69
—A—
—C—
A. (Audio) DUB
C (Color) Control . . . . . . . . . . . . .10,100
Camcorder Lens, Cleaning . . . . . . . .102
Camcorder, Cleaning . . . . . . . . . . . .102
Camcorder, Powering . . . . . . . . . .12-16
Camcorder, Turning On . . . . . . . . . . . .5
Camcorder, Unpacking . . . . . . . . . . . . .3
CAMERA/OFF/VCR Switch
Button . . . . . . . . . . . .18-19,20-21,71
Accessories, Included . . . . . . . . . . . . . .3
Accessories, Optional . . . . . . . . . .92-97
Accessory, Order Form . . . . . . . . .95-97
Adapter/Charger, Using . . . . . . . . . .4,12
AE Modes Indicators . . . . . . . .30,68-69
Animation Indicators . . . . . . . .32,62-63
Animation Recording . . . . . . . . . .62-63
Assistance . . . . . . . .1,3,105,Back Cover
Audio Dubbing . . . . . . . . . .32-33,70-71
Audio Dubbing Indicator . . . . .32-33,71
AUDIO, RF DC OUT, and VIDEO
Jacks . . . . . . .4,10,12,70,72,84,89,90
Audio/Video Cable (Optional) .84-85,89
Auto Head Cleaner . . . . . . . . . . . . . . .34
Auto Mode . . . . . . . . . . . . . . . . . . . .7,36
Auto Pause Feature . . . . . . . . . . . . . . .43
AUTO PAUSE Indicator . . . . . . . .32,43
AUTO PAUSE OFF•ON Switch . . .9,43
Auto Select Fade and Wipe Feature . .67
. . . . . . . . . . . . . . . .5,8,10,13,15,16,
. . . . . . . . . . . .18-19,26-27,28,35,41
. . . . . . .42,44,56,60-70,72,80,88-89
CANCEL Button . . . . . . . . .11,19,88-89
Car Cord Adapter, Optional . . . . . . . .16
Care and Maintenance . . . . . . . .102-103
Care and Storage of Battery . . . . . . . .15
Cassette Adapter . . . . . . . . . . . . . .78-79
Install Battery . . . . . . . . . . . . . . . .78
Cassettes, Care and Storage . . . . . . . .25
Cassette Door . . . . . . . . . . . . . . . . . . .4,9
Cassette, Inserting . . . . . . . . . . . . . . . . .4
Cassettes, Inserting and Removing .4,25
Cassette Moving Indicator . . . . . . . . .28
Cassette Warning . . . . . . . . . . .28,32-33
Cautions . . . . . . . . . .Inside Front Cover
Charging the Battery . . . . . . . . . . . . . .14
Checking Problems . . . . . . . . . . .98-101
Cinema Feature . . . . . . . . . . . . . . . . . .69
Classic Film Feature . . . . . . . . . . . . . .69
Cleaning Camcorder . . . . . . . . . . . . .102
Clock Cell Compartment . . . . . . . .10,55
Clock Cell Warning . . . . . . . . .32-33,55
Clock Cell, Installing . . . . . . . . . . . . .55
Color Enhancement Light . . . . .9,74-75
Color Filter Feature . . . . . . . . . . . . . . .51
Color Filter Indicators . . . . . . . . . . . . .51
Contents . . . . . . . . . . . . . . . . . . . . . . .1-2
—B—
B (Bright) Control . . . . . . . . . . . .10,100
Back Lit Feature . . . . . . . . . . . . . . . . .69
BACKLIGHT Button . . . . . . .9,32-33,37
BATT. RELEASE Button . . . . . . . .10,13
Battery Level Indicator . . . . . . .15,28,32
Battery Marker Switch . . . . . . . . . . . .13
Battery Safety Precautions . . . . . . . . .13
Battery, Care and Storage . . . . . . . . . .15
Battery, Using Rechargeable . . . . .13-15
Black Fader . . . . . . . . . . . . . . . . . . . . .67
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Controls, Camcorder . . . . . . . . . . . .9-11
Copying Tapes . . . . . . . . . .84-85,86-89
COUNTER R/M Button . . . .11,70,72,82
Customer
FADE/WIPE
Button . . . . . . .9,26-27,30-31,66-67
Fading Feature . . . . . . . . . . . . . . . .66-67
FF (Fast Forward)
Assistance . . . . .1,3,105,Back Cover
Button . . . . . . . . . . . .11,20-21,35,81
First-Time Operation . . . . . . . . . . . .3-11
Flying Erase Head . . . . . . . . . . . . . . . .34
FOCUS Buttons . . . . . . . . .32-33,38-39
Focus Lock Feature . . . . . . . . . . . . . . .38
Focusing . . . . . . . . . . . . . . . . . . . .38-39
Frame Indicator . . . . . . . . . . . . . . .40-41
Front Lit Feature . . . . . . . . . . . . . . . . .69
FRONTLIGHT Button . . . . . .9,32-33,37
Full AUTO Mode . . . . . . . . . . . . . . . .36
Full Indicator . . . . . . . . . . . . . . . . .40-41
—D—
DATE/TIME Button . . . . . . . .9,31,56-57
Date/Time Display . . . . . . .30-31,54-57
DC OUT Jack . . . . . . . .4,10,12,84,89,90
Design Specifications . . . . . . . . . . . .108
Dew Warning . . . . . . . . . . . . . . . .32-33
Displays, Viewfinder . . . . . . . . . . .30-33
Dissolve Feature . . . . . . . . . . . . . . . . .67
Door Wipe Feature . . . . . . . . . . . . . . .67
—G—
—E—
Gain Up Feature . . . . . . . . . . . . . . . . .50
Gain Up Indicators . . . . . . . . . .32-33,50
EDIT Button . . . . . . . . . . . . . . .11,85,89
Edit Insert Feature . . . . . . . . . . . . .72-73
Edit Insert Indicators . . . . . .32-33,72-73
EDIT SEARCH + and –
—H—
Buttons . . . . . . . . . . . . . . . .11,27,35
EIS (Electronic Image Stabilizer)
Hand Strap, Adjusting . . . . . . . . . . . . .5
Handstrap . . . . . . . . . . . . . . . . . . . . .5,10
Button . . . . . . . . . . . . . . . . .30-31,42
EIS Indicator . . . . . . . . . . . . . . . . .31,42
EJECT Button . . . . . . . . . . .4,9,25,26,80
Electronic Image Stabilizer . . . . . . . . .42
Erase Protection . . . . . . . . . . . . . . . . .24
Exposure Control . . . . . . . . . . . . . . . .37
Exposure Level Indicator . . . . .32-33,37
External Microphone Jack . . . . . . .9,34
Eyepiece Focus Control . . . . . .7,9,26,29
—I—
IN/OUT Button . . . . . . . . . . .9,11,88-89
Included Accessories . . . . . . . . . . . . . .3
INDEX Indicator . . . . . . . . . . . . . .32,43
Indexing, Electronic . . . . . . . . . . . . . .43
Information to User . . . . . . . . . . . . . .104
INSERT Button . . . . . . . .18-19,20-21,73
Inserting and Removing Cassettes . . .25
Installing Clock Cell . . . . . . . . . . . . . .55
—F—
F FWD Button . . . . . .18-19,35,86-87,81
Fade Indicators . . . . . . . . . . . . . . .30-31
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
ON/OFF Button . . . . . . . . . .11,19,88-89
Operation, First-Time . . . . . . . . . . .3-11
Optional Accessories . . . . . . . . . . .92-97
Order Form, Accessory . . . . . . . . .95-97
—J—
JLIP ID NO. on Menu . . . . . . . . . . . .59
JLIP Jack . . . . . . . . . . . . . . . . .10,88-89
—L—
—P—
LCD Panel . . . . . . . . . . . . . . . . . . . .9,28
Lens . . . . . . . . . . . . . . . . . . . . . . . .9,102
LENS COVER Control . . . . . . . .5,8,9,26
LENS COVER Display . . . . . . . . . . . .32
Lens, Cleaning . . . . . . . . . . . . . . . . .102
LIGHT OFF•AUTO•ON
Switch . . . . . . . . . . . . . . .9,26-27,74
Light, Built In . . . . . . . . . . . . . . . .74-75
Limited Warranty . . . . . . . . . . .106-107
PAUSE
Indicator . . . . . . . . . . . .5,8,73
PAUSE Button . . . . . . . . . . .18-19,20-21
. . . . . . . . . . . . . .70-71,72-73,86-87
Pause, Stop-Action . . . . . . . . . . . . . . .81
PHOTO EFFECTS
Button . . . . . . .9,26-27,30-31,40-41
Pin-Up Indicator . . . . . . . . . . . . . .40-41
PLAY Button . .18-19,20,71,73,81,86-87
PLAY Indicator . . . . . . . . . . . . . . . . . .28
PLAY/PAUSE
—M—
Button . . . . . . . . . . . . .8,11,70,72,80
Playback . . . . . . . . . . . . . . . . . . . .78-91
Playback Features . . . . . . . . . . . . .81-83
Playback on a TV With
AUDIO/VIDEO IN Jacks . . . . .84-85
Playback on a TV Without
Maintenance and Care . . . . . . . .102-103
Making a Recording . . . . . . . . . . . . . .26
MAN.W.BAL (Manual White Balance)
Button . . . . . . . . . . . . . . . . .11,44-45
Manual Focus
Indicators . . . . . . . . .32-33,38-39,44
MBR SET Button . . . . . . . . . . .18,86-87
Memory-Stop Feature . . . . . . . .70,72,82
MENU Button . . . . . . .9,26,46-54,58-69
MIC Jack . . . . . . . . . . . . . . . . . . . . .9,34
Microphone . . . . . . . . . . . . . . . . . . .9,34
Mode Select Dial . .7,26-27,30-31,36,37
. . . .38-39,40,42,44,46-54,56,58-69
Mosaic Fader . . . . . . . . . . . . . . . . . . .67
Multi-4 and Multi-9 Indicators . . .40-41
Audio/Video Inputs . . . . . . . . .90-91
Playback Speeds . . . . . . . . . . . . . . . . .24
Playback, First . . . . . . . . . . . . . . . . . . .8
Playback, Viewfinder . . . . . . . . . . . . .80
Plug Adapter (Optional) . . . . . . . . . . .12
POWER (CAMERA/OFF/VCR)
Switch . . . . . . . . . . .5,8,10,13,15,16,
. . . . . . . . . . . .18-19,26-27,28,35,41
. . . . . . .42,44,56,60-70,72,80,88-89
Powering the Camcorder . . . . . . . .12-16
Preset Titles . . . . . . . . . . . . . . . . . . . .52
Problem Solving . . . . . . . . . . . . .98-101
Product Registration .Inside Front Cover
Production Effects . . . . . . . . . . . . .68-69
Production Effects Indicators . . . . . .69
Programmable Synchro Edit . . . . .88-89
Proper Care and Storage . . . . . . . . . .103
—O—
OFF/CAMERA/VCR Switch
. . . . . . . . . . . . . . . .5,8,10,13,15,16,
. . . . . . . . . . . .18-19,26-27,28,35,41
. . . . . . .42,44,56,60-70,72,80,88-89
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Shoulder Strap Attachment Rings .10,76
Shoulder Strap, Attaching . . . . . . . . . .76
Slow Shutter Feature . . . . . . . . . . . . . .69
SNAPSHOT
—Q—
Quick Review Feature . . . . . . . . . . . .35
—R—
Button . . .10,18,26-27,30-31,40-41,
Snapshot Indicators . . . . . . .30-31,40-41
Snapshot Search Feature . . . . . . . . . . .41
Solving Problems . . . . . . . . . . . .98-101
Specifications . . . . . . . . . . . . . . . . . .108
Speeds, Recording and Playback . . .6,24
Sports Feature . . . . . . . . . . . . . . . . . . .69
SP•SLP Switch . . . . . . . . . . . . . .6,11,26
START/STOP
Button . . . .18,20-21,35,61,63,65,73
Status Displays . . . . . . . . . . . . . . . . . .30
Status Indicators, LCD Panel . . . . . . .28
STOP
RANDOM ASSEMBLY EDIT
Buttons . . . . . . . . . . . . .18-19,88-89
REC
Indicator . . . . . . . . . .8,27,30
REC/PAUSE Button . . . . . .18-19,88-89
Recording Menu – Sub Menu . . . .58-65
Recording Menus . . . . . . . . . . . . .46-69
Recording Speeds . . . . . . . . . . . . . .6,24
Recording Tips . . . . . . . . . . . . . . . . . .23
Recording, First . . . . . . . . . . . . . . . . . .8
Recording, Making a . . . . . . . . . . .26-27
Refreshing the Battery . . . . . . . . . . . .14
Registration Card . . .Inside Front Cover
Remote Battery, Replacing . . . . . .17,22
Remote Control (Model CC638) . .20-22
Remote Control (Model CC639) . .17-19
Remote Control Sensor . . . . . . . .9,17,22
Remote, Program to Operate
Button . . .8,11,18-19,20,80,82,88-89
Stop-Action Pause . . . . . . . . . . . . . . .81
Strobe Feature . . . . . . . . . . . . . . . . . . .69
Sub Menu – Recording Menu . . . .58-65
—T—
VCR . . . . . . . . . . . . . . . . . . . . .86-87
Replacing Remote Battery
Table of Contents . . . . . . . . . . . . . . .1-2
Tally Light . . . . . . . . . . . . . . . . .9,34,59
Tally Light Feature on Menu . . . . . . .59
Tape Copying . . . . . . . . . . .84-85,86-89
TAPE END Indicator . . . . . . . . . . .32,47
Tape Length Indicator . . . . . . .32-33,47
Tape Speed Indicators . . . . . . . . . .28,30
Tele Macro Feature . . . . . . . . . . . . . . .49
Things to Avoid . . . . . . . . . . . . . . . .103
Thumb Trigger . . . . . . . . . . . . . . . . .8,10
Tilt, Viewfinder . . . . . . . . . . . . . . . . .29
Time Counter . . . . . . . . . . . . . .32-33,82
TIME LAPSE ANIM. REC/TIME
(Model CC638) . . . . . . . . . . . . . . .22
Replacing Remote Battery
(Model CC639) . . . . . . . . . . . . . . .17
REW (Rewind) Button
. . . . . .8,11,18,20,35,70,73,82,86-87
RF Output Adapter, Optional . . . .90-91
—S—
Safety Tab . . . . . . . . . . . . . . . . . . . . . .24
Scroll Wipe Feature . . . . . . . . . . . . . .67
Searching, Visual . . . . . . . . . . . . . . . .81
Self-Timer Feature . . . . . . . . . . . .60-61
Self-Timer Indicators . . . . . . . .32,60-61
Sepia Feature . . . . . . . . . . . . . . . . . . .69
Button . . . . . . . . . . . .18,20-21,63,65
TIME LAPSE SELF INT.(Interval)/
TIME Button . . . . . . . . .18,20-21,61
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Time-Lapse Indicators . . . . . . .32,64-65
Time-Lapse Recording . . . . . . . . .64-65
Time-Remaining Indicators . . . . . .32,47
Tips, Recording . . . . . . . . . . . . . . . . . .23
Tips, Traveling . . . . . . . . . . . . . . . . . .77
Title Display . . . . . . . . . . . .30-31,52-53
Title Feature . . . . . . . . . . . . . . . . .52-53
Tracking . . . . . . . . . . . . . . . . . . . . . . .83
TRACKING Buttons . . . . . . . . . . . .11,83
Traveling Tips . . . . . . . . . . . . . . . . . . .77
Tripod, Using . . . . . . . . . . . . . . . . . . .93
Trouble Checks . . . . . . . . . . . . . .98-101
Turning On the Camcorder . . . . . . . . . .5
—W—
Warranty, Limited . . . . . . . . . . .106-107
White Balance Feature . . . . . . . . .44-45
White Balance Indicators . . . . .32-33,45
Window Wipe Feature . . . . . . . . . . . .67
Wipe Indicators . . . . . . . . . . . .30-31,67
Wiping Feature . . . . . . . . . . . . . . .66-67
—Z—
ZOOM Buttons . . . . . . . . . .18-19,20,48
Zoom Indicator . . . . . . . . . . . . .30-31,48
Zoom Lever . . . . . . . . . . . . . . . . . . .9,48
Zooming . . . . . . . . . . . . . . . . . . . .48-49
—U—
Unpacking the Camcorder . . . . . . . . . .3
User Information . . . . . . . . . . . . . . . .104
Using Cassette Adapter . . . . . . . . .78-79
—V—
VCR/OFF/CAMERA Switch
. . . . . . . . . . . . . . . .5,8,10,13,15,16,
. . . . . . . . . . . .18-19,26-27,28,35,41
. . . . . . .42,44,56,60-70,72,80,88-89
VCR Button . . . . . . . . . . . . .18-19,86-87
VCR Code Numbers . . . . . . . . . . .86-87
Video Cassettes . . . . . . . . . . . . . . .24-25
Viewfinder . . . . . . . . . .7,9,26,29,80,102
Viewfinder Displays . . . . . . . . . . .30-33
Viewfinder Playback . . . . . . . . . . . . .80
Viewfinder, Cleaning . . . . . . . . . . . .102
VISS Button . . . . . . . . . . . . . . . . . .18,43
Visual Searching . . . . . . . . . . . . . . . . .81
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Need Assistance? We want to help!
U.S. Consumers:
Camcorder Exchange Warranty . . . . . .800-283-6503
Customer Service . . . . . . . . . . . . . . . . .800-336-1900
Accessories . . . . . . . . . . . . . . . . . . . . .800-338-0376
Canadian Consumers:
English . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0338
French . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0445
If your camcorder needs service, please
contact your dealer or the nearest Servicenter
from the yellow pages. Please do not send
any products to the Indianapolis address listed
in this manual or on the carton. This will only
add delays in service for your product.
10330 N Meridian Street
Indianapolis, IN 46290
©
1996 Thomson Consumer Electronics, Inc.
®
Trademark(s) Registered
Marca(s) Registrada(s)
Printed in Japan
Part Number 96-CC638/CC639-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Raymarine GPS Receiver E32001 User Guide
Rheem Water Heater 136 1826 User Guide
Roberts Radio CD Player ZoomBox User Guide
ROUTE 66 GPS Receiver Mobile 8 User Guide
Ryobi Cordless Saw P523 User Guide
Ryobi Trimmer 240RJ User Guide
Samson Guitar VX2510 User Guide
Samsung DVD VCR Combo DVD VR370 User Guide
Samsung DVD VCR Combo SM 308 User Guide
Sangean Electronics MP3 Player PT 10 User Guide