DVD-VR370
DVD-VR375
DVD & VCR
user manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
PrECaUTiOn
important Safety instructions
Read these operating instructions carefully before using the unit.
Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. if the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Handling Cautions
~
~
Before connecting other components to this DVD Recorder & VCR, be sure to turn them all off.
Do not move the DVD Recorder & VCR while a disc is being played, or the disc may be scratched or
broken, the DVD Recorder & VCR internal parts may be damaged.
~
~
~
~
Do not put a flower vase filled with water or any small metal objects on the DVD Recorder & VCR.
Be careful not to put your hand into the disc tray.
Do not place anything other than the disc in the disc tray.
Exterior interference such as lightning and static electricity can affect normal operation of this DVD
Recorder & VCR. If this occurs, turn the DVD Recorder & VCR off and on again with the STanDBY/On
button, or disconnect and then reconnect the AC power cord to the AC power outlet. The DVD Recorder &
VCR will operate normally.
~
~
Be sure to remove the disc and turn off the DVD Recorder & VCR after use.
Disconnect the AC power cord from the AC outlet when you don’t intend to use the DVD Recorder & VCR
for long periods of time.
~
~
Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
~
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
English _ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
~
~
Do not use benzene, thinner, or other solvents for cleaning.
Wipe the cabinet with a soft cloth.
Disc Handling
~
Use discs with regular shapes. If an irregular disc (a disc with a special shape)
is used, this DVD Recorder & VCR may be damaged.
Holding discs
~
Avoid touching the surface of a disc where recording is performed.
DVD-raM, DVD rW and DVD r
~
Clean with an optional DVD-RAM/PD disc cleaner.
Do not use cleaners or cloths for CDs to clean DVD-RAM/DVD RW/ R discs.
DVD-Video, audio CD
~
Wipe off dirt or contamination on the disc with a soft cloth.
Cautions on handling discs
~
~
Do not write on the printed side with a ball-point pen or pencil.
Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or
thinner.
~
Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover
peeled-off stickers.)
~
~
~
Do not use scratch-proof protectors or covers.
Do not use discs printed with label printers available on the market.
Do not load warped or cracked discs.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
~
~
~
~
~
Do not keep under direct sunlight.
Keep in a cool ventilated area.
Store vertically.
Keep in a clean protection jacket.
If you move your DVD Recorder & VCR suddenly from a cold place to a warm place, condensation may
generate on the operating parts and lens and cause abnormal disc playback.
If this occurs, do not connect the plug to the power outlet and wait for two hours.
Then insert the disc and try to play back again.
ꢂ_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Specifications
~
DVD-VR370
This unit allows you to record and playback high quality digital images on a DVD-RAM/DVD-RW/DVD-R disc.
You can record and edit digital video on DVD-RAM/DVD-RW/DVD-R discs as if they were VCR tapes.
(DVD+RW/DVD+R discs can be played, but cannot be recorded.)
~
DVD-VR375
This unit allows you to record and playback high quality digital video on DVD-RAM/DVD RW/DVD R discs.
You can record and edit digital video on DVD-RAM/DVD RW/DVD R discs as if they were VCR tapes.
Disc Type
❖ DVD-Video
~
A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32 subtitle
languages. It is equipped with MPEG-2 picture compression and Dolby digital surrounding, allowing you to
enjoy vivid and clear theatre quality images in the comfort of your own home.
~
~
When switching from the first layer to the second layer of a dual-layered DVD Video disc, there may be
momentary distortion in the image and sound. This is not a malfunction of the unit.
Once a DVD-RW(V)/-R(V)/+R recorded is finalised, it is playable in a standard DVD player.
❖ audio CD
~
~
~
An audio disc on which 44.1 kHz PCM Audio is recorded.
Plays CD-DA format audio CD-RW and CD-R discs.
The unit may not be able to play some CD-RW or CD-R discs due to the condition of the recording.
CD-rW/-r
❖ MP3 CD-rW/-r
~
~
~
~
~
Only CD-R discs with MP3 files recorded with ISO9660 or JOLIET format can be played back
Only MP3 files with the “mp3” or “MP3” extension can be used.
Playable bitrate range is from 32 Kbps to 320Kbps.
The unit can handle a maximum of 499 files and folders.
DVD-RAM/DVD RW/DVD R discs that contain MP3 files can be played back.
❖ JPEg CD-rW/-r
~
~
~
~
~
Only JPEG files with the “.jpg”, “.JPG” extension can be used.
The unit can handle a maximum of 1000 files and folders.
Maximum size of progressive JPEG is 3M pixels.
MOTION JPEG is not supported.
DVD-RAM/DVD RW/DVD R discs that contain JPEG files can be played back.
❖ Using CD-rW/-r
~
~
~
Use a 700MB (80 minutes) CD-RW/-R disc.
If possible, do not use a 800MB (90 minutes) or above disc, as the disc may not play back.
If the CD-RW/-R disc was not recorded as a closed session, you may experience a delay in the early
playback time, and all recorded files may not play.
Some CD-RW/-R discs may not be playable with this unit, depending on the device which was used to
burn them. For contents recorded on CD-RW/-R media from CDs for your personal use, playability may
vary depending on contents and discs.
English _ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
❖ Using MPEg4 disc
~
~
~
~
~
~
Video File with following extensions can be played. : .avi, .divx, .AVI, .DIVX
DivX Video (Codec) Format : DivX 3.11 DivX 4.x DivX 5.x (without QPEL and GMC)
DivX Audio (Codec) Format : MP3, AC3, DTS
Supported subtitle file formats: .smi, .srt, .sub, .txt, .ass
Each folder can have up to 500 items including files and sub folders.
You cannot play back the disc that is larger than a 720 x576 pixel resolution.
DVD-rW/-r Disc Playback and recording
~
~
Recording and playback can be performed on DVD-RW/-R discs in both Video and VR Modes.
Once a DVD-RW/-R is recorded in VR or Video mode and finalised, you cannot perform additional
recordings.
~
~
Once a DVD-RW/-R is recorded in Video Mode and finalised, it becomes a DVD-Video.
In both modes, playback can be performed before and after finalisation, but additional recording, deleting
and editing can not be performed after finalisation.
~
~
If you want to record the disc in VR Mode and then record in V Mode, be sure to execute format.
Be careful when executing Format because all the recorded data may be lost. You can change the disc
mode only one times when the unused DVD-R disc is inserted.
DVD-rW/-r (Vr mode)
- You can record multiple titles, edit, delete, partial delete, create a playlist, etc.
- A disc that is recorded in this mode may not be played by existing DVD players.
DVD-rW/-r (Video mode)
~
- The disc can be played by an existing DVD player once it has been finalised.
- If a disc that has been recorded in Video mode by a different manufacturer's recorder but has not been
finalised it cannot be played or recorded by this recorder.
-
When programming is erased from a DVD-R, that space does not become available. Once an
area on a DVD-R is recorded on, that area is no longer available for recording, whether the
recording is erased or not.
DVD+r Disc Playback and recording
~
~
Once a DVD+R is recorded and finalised, it is playable in a standard DVD player.
You can record onto the available space on the disc and perform editing functions such as giving titles to
discs and programmes and erasing programmes before finalising.
~ When programming is erased from a DVD+R, that space does not become available. Once an area
on a DVD+R is recorded on, that area is no longer available for recording, whether the recording is
erased or not.
~
~
It takes about 30 seconds for the unit to update the recorded information after recording finishes.
This product optimizes the DVD+R for each recording. Optimizing is executed when you start recording
after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing
is performed too many times.
~
~
Playback may be impossible in some cases due to the condition of recording.
This unit can play back DVD+R discs recorded and finalised with a Samsung DVD video recorder.
It may not be able to play some DVD+R discs depending on the disc and the condition of the recording.
ꢄ_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD+rW Disc Playback and recording
~
With DVD+RW discs, there is no difference between DVD-Video format(Video mode) and DVD-Video
Recording format (VR mode).
~
Finalising is generally unnecessary when using a DVD+RW disc.
DVD-raM Disc Playback and recording
~
~
~
~
For cartridge type DVD-RAM discs, remove the cartridge and use the disc only.
You cannot play a DVD-RAM in most DVD players due to compatibility issues.
Only DVD-RAM standard Version 2.0 discs can be played in this unit.
DVD-RAM recorded on this unit may not work with other DVD Players. To determine compatibility with
these DVD-RAM discs, refer to the user’s manual for the player.
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD Recorder & VCR
directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
• It is permissible to record television programmes, film, video tapes and other material only in the event that third party
copyrights and other rights are not violated.
Protection
~
~
~
Programme-protected: See page 70 “Locking a Title”
Disc-protected : See page 76 “Disc Protection”
DVD-RAM/DVD RW/DVD R discs that are incompatible with the DVD-VIDEO format can not be played
with this product.
~
~
For more information on DVD recording compatibility, consult your DVD-RAM/DVD RW/DVD R
manufacturer.
Use of poor quality DVD-RAM/DVD RW/DVD R discs may cause following unexpected problems
including, without limitation, recording failure, loss of recorded or edited materials or damage to the
recorder.
Do not use the following discs!
~
LD, CD-G, CD-I, CD-ROM, DVD-ROM discs should not be used in this product.
[Note]
Disc types that can be played : CD/CD-RW/-R/MP3/JPEG/DVD-Video/DVD-RAM/DVD RW/DVD R.
For a DVD-RW/-R disc, which has been recorded in Video Mode on another component, it can play only
when finalised.
~
Some commercial discs and DVD discs purchased outside your region may not be playable with this
product. When these discs are played, either “No Disc.” or “Playback prohibited by region code.” will be
displayed.
~
If your DVD-RAM/DVD RW/DVD R disc is an illegal copy or is not in DVD video format, it may also not be
playable.
Disc compatibility
~
A 8X speed DVD+RW or greater disc can be played, but maximum recording speed is 4x.
~
Not all brands of discs will be compatible with this unit.
English _ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
2
3
Warning
Precaution
getting started
10 General Features
11 Before Reading the User’s Manual
12 How to use the DVD Recorder & VCR
14 Unpacking
16 Tour of the Remote Control
17 Description
2
20 Connecting DVD Recorder & VCR to the TV
connecting & setting up
using the RF Cable
21 Connecting DVD Recorder & VCR to the TV
using the Audio/Video Cable
22 Connecting the Component Video Cable
23 Connecting HDMI/DVI to a TV
(DVD-VR375 only)
25 AV Receiver Connections
20
26 Connecting External Devices
28 On-Screen Menu Navigation
28 Plug & Auto Setup
system setup
29 Tuner Preset
30 Clock Set
28
31 Setting up the Video Options
33 Setting up the Audio Options
36 Setting up the Features
40 Setting up the Options
44 Region code (DVD-Video only)
44 Logos of Discs that can be played
45 Disc types that can be played
46 Playing a Disc
47 Using the Disc Menu & Title Menu
47 Using the playback related buttons
48 Using the ANYKEY button
51 Playing an Audio CD/MP3
52 Playing back a Picture Disc
53 Playing an MPEG4 Disc
playback
44
54 Playing back a VHS Tape (VCR)
ꢆ_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Recordable discs
57 Recording Mode
recording
58 Unrecordable pictures
59 Recording immediately
60 Recording through the DV Input jack
56
(DVD-VR375 only)
60 Making a One Touch Recording (OTR)
61 Making a Timer Recording
63 Editing the Timer List
63 Deleting the Timer List
64 Basic VCR Recording
65 Check Remaining Time
65 Special Recording Features
66 Dubbing to DVD or VIDEO
67 DV Dubbing (DVD-VR375 only)
69 Playing the Title List
70 Basic Editing (Title List)
73 Advanced Editing (Playlist)
76 Disc Setting
editing
69
80 Troubleshooting
reference
80
83 Specifications
appendix
83
English _ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
gEnEraL FEaTUrES
~
DVD-VR370
This unit allows you to record and playback high quality digital images on a DVD-RAM/DVD-RW/DVD-R disc.
You can record and edit digital video on DVD-RAM/DVD-RW/DVD-R discs as if they were VCR tapes.
(DVD+RW/DVD+R discs can be played, but cannot be recorded.)
~
DVD-VR375
This unit allows you to record and playback high quality digital video on DVD-RAM/DVD RW/DVD R discs.
You can record and edit digital video on DVD-RAM/DVD RW/DVD R discs as if they were VCR tapes.
High quality digital audio and video recording and playback
You can record up to approximately 16-hours of video on a double side 9.4 GB DVD-RAM disc, up to
15-hours on a dual-layer 8.5GB DVD R disc, and up to 8-hours on a 4.7GB DVD-RAM/DVD RW/DVD R
disc, depending on the recording mode.
Creating a DVD video title using DVD rW/ r disc
With the DVD Recorder & VCR, you can create your own DVD Video titles on 4.7 GB DVD RW/ R or 8.5GB
DVD R discs.
a Variety of recording Options
You can set your DVD Recorder & VCR to one of eight different recording modes, each varying in recording
quality and length. Select a recording mode according to the time and picture quality you need.
For example, if picture quality is your top priority, select “HQ” (high quality). If recording time is your priority,
“SLP” may be a possible choice. Dual layer DVD Rs have approximately double the capacity of single layer
DVD Rs.
Dubbing data from a digital camcorder using a DV input jack
Record digital camcorder images onto DVD-RAM/DVD RW/DVD R discs using the DV input jack
(IEEE 1394-4pin/4pin). (See page 60) (DVD-VR375 only)
High quality progressive scan
Progressive scanning provides high resolution and flicker free video. The 10-bit 54-MHz DAC and
2D Y/C Separating Circuitry provides the highest image playback and recording quality.
Component progressive scan output video is available in both DVD and VCR modes.
When the HDMI cable is connected, 'off' can not be selected. (See page 33) (DVD-VR375 only)
a variety of functions with easy-to-use user interface
Integrated menu system and messaging functionality allow you to perform the desired operations easily and
conveniently. With a DVD-RAM/DVD-RW/DVD-R(VR mode) disc, you can edit recorded images, create
playlist, and edit images in specific sequence according to your needs.
DivX Certification
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX Ultra
Certified device that plays DivX video.
HDMi (High Definition Multimedia interface)
HDMI reduces picture noise by allowing a pure digital video/audio signal path from the DVD
Recorder & VCR to your TV. (DVD-VR375 only)
EZ record Mode
This function allows you initialise and Finalise a disc automatically. (See page 38)
10_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFOrE rEaDing THE USEr’S ManUaL
Make sure to check the following terms before reading the user’s manual.
icons that will be used in manual
Icon
Term
Definition
This involves a function available on DVD or DVD-RW(V)/DVD-R(V)/+R discs that have
been finalised.
DVD
Z
RAM
-RW
This involves a function available on DVD-RAM.
X
C
V
K
L
B
G
A
D
This involves a function available on DVD-RW.
-R
This involves a function available on DVD-R.
+RW
+R
This involves a function available on DVD+RW.
This involves a function available on DVD+R.
CD
This involves a function available on a data CD (CD-RW or CD-R).
This involves a function available on DVD-RAM/DVD RW/ R discs.
This involves a function available on DVD-RAM/DVD RW/ R discs.
This involves a function available in a data DVD-RAM/DVD RW/DVD R discs.
This involves a function available in VIDEO Tape.
JPEG
MP3
MPEG4
VHS
Caution
NOTE
This involves a case where a function does not operate or settings may be cancelled.
This involves tips or instructions on the page that help each function operate.
J
M
N
H
One-Touch button A function that can be operated by using only one button.
ANYKEY button A function that can be operated by using ANYKEY button.
about the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before using this product. (See pages 2~7)
2) If a problem occurs, check the Troubleshooting. (See pages 80~82)
Copyright
©2008 Samsung Electronics Co.,Ltd.
All rights reserved No part or whole of this user’s manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
English _11
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
HOW TO USE THE DVD rECOrDEr & VCr
Step 1 : Select the disc type
Please check available disc type before recording.
~
DVD-VR370
(DVD+RW/DVD+R discs can be played, but cannot be recorded.)
DVD-VR375
~
If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a
rewritable DVD-RAM or DVD RW type disc. If you want to save a recording without any changes, choose a
non-rewritable DVD R.
Step 2 : Format the disc to start recording
Unlike a VCR, the DVD Recorder & VCR starts formatting when an unused disc is inserted.
Using a DVD-raM/ rW/+r
When an unused DVD-RAM/ RW/+R disc is first inserted, the message "Unformatted Disc. Formatting.
Please wait." will be displayed.
Using a DVD-r
It is not necessary to format a new DVD-R disc. When it is inserted, it will operate in Video mode.
It can also be formatted in VR mode in the setup menu.
You can change the disc mode only once when an unused DVD-R disc is inserted.
` You can only use either the VR or Video mode on a DVD-RW/-R, but not both at the same time.
M
` You can format a DVD-RW/-R to V or VR mode using Disc Setting. It should be noted that the disc’s data will be lost
when changing formats.
1ꢀ_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 : recording
There are two different recording methods, Direct Recording (recording a programme you are currently
watching) and Timer Recording.
Timer recording is classified as follows : Recording mode : HQ (high quality mode), HSP, SP (standard quality
mode), LSP, ESP, LP, EP, SLP (Long duration mode) according to the recording mode.
When recording is set in the AUTO mode, the best quality picture is recorded with regards to the remaining
time on the disc.
Step 4 : Playing
To start playback, select the title you want to play from the title list.
A DVD consists of sections called titles, and sub sections called chapters.
During recording, a title is created between two points where you start and stop recording.
Chapters will be created automatically regardless of the disc type when it is set at the setup menu.
Step 5 : Editing a recorded disc
Editing on discs is easier than conventional video tapes.
The recorder supports many different edit functions, possible only with DVDs.
With a simple and easy edit menu, you can operate various edit functions, such as delete, dubbing, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-raM/-rW/-r in Vr mode)
With this DVD Recorder & VCR, you can create a new playlist on a disc and edit it without the original,
pre-existing recording.
Step 6 : Finalising & Playing on other DVD components
To play your DVD on other DVD components, finalising may be necessary. First, finish all editing and
recording operations, then finalise the disc.
When using a DVD-rW/-r disc in Vr Mode
Although finalising is generally unnecessary when playing the disc on a VR Mode compatible component, a
finalised disc should be used for playback.
When using a DVD-rW/-r disc in Video Mode
The disc should be finalised first to enable playback on anything other than this recorder.
No more editing or recording can be made on the disc once it has been finalised.
To enable recording on the disc again, the disc must be unfinalised.
When using a DVD+r disc
You should finalise the disc to play it on a component other than this DVD Recorder & VCR.
No more editing or recording can be made on the disc once it has been finalised.
` You can finalise the disc automatically using EZ Record. (See page 38)
M
English _1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
UnPaCKing
accessories
Check for the supplied accessories below.
Video/Audio Cable
RF Cable for TV
User's Manual
HDMI Cable
Quick Guide
Remote Control
Batteries for Remote Control
(AAA Size)
Preparing the remote Control
installing batteries in the remote Control
1. Lift the cover at the back of the
2. install two aaa size batteries.
3. replace the cover.
remote control upward as shown.
Make sure to match the “+” and “–”
ends of the batteries with the diagram
inside the compartment.
Assuming typical TV usage,
the batteries last for about one
year.
if the remote does not operate properly :
~
~
~
~
Check the polarity +/– of the batteries (Dry-Cell)
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental regulations.
Do not put them in the household trash.
To determine whether your television is compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV button and enter the two-figure code corresponding to the brand of your television,
by pressing the appropriate number buttons.
1ꢂ_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Controllable TV Codes
BRAND
SAMSUNG
AKAI
SELECT NUMBER
BRAND
PANASONIC
PHILIPS
SELECT NUMBER
TV +08, +23, +24, +25, +26, +27
TV +02, +20, +22
TV +02, +20, +22
TV +14, +23
TV +01, +02, +03, +04, +05, +06, +35
TV +12
BANG & OLUFSEN
BLAUPUNKT
BRANDT
TV +22
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
REX
TV +09
TV +14
TV +02, +20
BRIONVEGA
CGE
TV +22
TV +22
TV +21
TV +23
CONTINENTAL EDISON
FERGUSON
FINLUX
TV +24
SABA
TV +13, +14, +22, +23, +24
TV +23
TV +14
SALORA
TV +02, +17, +21
TV +12
SANYO
TV +12, +16
FISHER
SCHNEIDER
SELECO
TV +02
FORMENTI
GRUNDIG
HITACHI
TV +22
TV +23
TV +09, +17, +21
TV +11, +13, +14, +24
TV +21
SHARP
TV +10, +16, +31
TV +09
SIEMENS
SINGER
IMPERIAL
JVC
TV +22
TV +32
SINUDYNE
SONY
TV +22
LG
TV +02, +30
TV +02
TV +15, +16
LOEWE
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
WEGA
TV +14
LOEWE OPTA
METZ
TV +02, +22
TV +22
TV +14, +24, +28
TV +13, +14, +24
TV +33, +34
MITSUBISHI
MIVAR
TV +02, +16
TV +21, +29
TV +23
TV +07, +16, +17, +18, +19, +21
TV +22
NOKIA
NORDMENDE
TV +13, +14, +22, +24
YOKO
TV +02
Result : If your television is compatible with the remote control, it will switch off.
It is now programmed to operate with the remote control.
` If several codes are indicated for your television brand, try each one in turn until you find one that works.
M
` If you replace the remote control’s batteries, you must set the brand code again.
Then you can control the television using the following buttons after pressing the TV button.
Button
Function
TV STANDBY/ON
INPUT SEL.
TV VOL (+ –)
PROG/TRK (, .
TV MUTE
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the desired channel.
Used to toggle the sound on and off.
Used to input number directly.
)
Number
English _1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
TOUr OF THE rEMOTE COnTrOL
Your DVD Recorder & VCR remote control will work with Samsung televisions and compatible brands.
dVd button
Vcr button
Press this when you use a DVD.
Press this when you use a VCR mode.
tV button
input sel. button
Press this to operate TV.
Select input signal in external input mode
[Prog., AV1, AV2 or DV input (DVD-VR375 only)].
open/close button
standby/on button
To open and close the disc tray.
tV standby/on button
number button
angle button
audio button
Use this to access various audio functions on a disc
(DVD mode).
f.adV/skip button
playback-related buttons
Forward/Rewind, Search, Skip, Stop, Play, Pause.
tV mute button
This operates as sound mute (TV mode).
prog/trk button
tV Vol (Volume) button
Press this to select a TV channel/Press this to
remove the white line.
TV volume adjustment.
menu button
return button
Brings up the DVD Recorder & VCR’s setup menu.
Returns to previous menu.
OK/Direction Buttons
(UP/DOWN or LEFT/RIGHT Buttons)
This button functions as a toggle switch.
info button
exit button
This will display current setting or disc status.
play list/title menu button
title list/disc menu button
Press this to enter the Edit playlist/Title menu.
Press this to enter the Title List/Disc menu.
subtitle button
tV/Vcr button (not available)
Press this to switch the DVD’s subtitle language.
anykey button
eZ rec mode button
Press this to view the status of the disc that is being played.
rec button
Press this to make a recording on DVD-RAM/ RW/ R discs and
VHS Video tape.
timer rec button
Press this when you use Timer Recording.
to dVd dubbing button
to Vcr dubbing button
Press this when you dubbing from the VCR to the DVD.
Press this when you dubbing from the DVD to the VCR.
rec speed button
cancel button
Press this to set the desired recording time and picture quality.
1ꢄ_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCriPTiOn
Front Panel (DVD-Vr370)
Front Panel (DVD-Vr375)
DVD OPEN/CLOSE BUTTON
PROG(,/.), SEARCH/SKIP BUTTON
RECORD BUTTON
VCR DECK
VCR EJECT BUTTON
STOP BUTTON
PLAY/PAUSE BUTTON
DUBBING BUTTONS
DVD/VCR SELECT BUTTON
FRONT PANEL DISPLAY
DVD DECK
AUDIO INPUT JACK (AV2 IN)
10
1ꢁ
11
1ꢀ
1ꢃ
DV IN JACK
(DVD-VR375 only)
VIDEO INPUT JACK (AV2 IN)
STANDBY/ON BUTTON
1ꢂ
English _1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
rear Panel (DVD-Vr370)
rear Panel (DVD-Vr375)
AUDIO L, R OUT JACKS
AERIAL IN CONNECTOR
VIDEO/AUDIO JACK (AV1 IN)
COMPONENT VIDEO OUT JACKS
VIDEO/AUDIO JACK (AV OUT)
OUT TO TV CONNECTOR
HDMI OUT JACK
(DVD-VR375 only)
DIGITAL AUDIO OUT (COAXIAL)
` The Antenna connection does not pass the output signal of the DVD Recorder & VCR.
To watch output signal of the DVD Recorder & VCR, you must connect audio/video.
M
1ꢆ_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Display
In Disc Indicator
Progressive Scan Indicator
STATUS Indicator
DVD view Indicator
TIMER Indicator
VCR view Indicator
Disc Media Indicator
English _1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
connecting & setting up
COnnECTing DVD rECOrDEr & VCr TO THE TV USing THE rF
CaBLE
` Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.
M
1. Remove the aerial or network input cable from the television.
ꢀ. Connect this cable to the 75Ω aerial jack marked
on the rear of your DVD Recorder & VCR.
ꢁ. Plug the RF Cable supplied into the jack on your DVD Recorder & VCR.
ꢂ. Plug the other end of the RF Cable into the connector previously used for the aerial on the television.
` The RF cable connection of this product sends only signal of TV.
M
` You must connect Audio/Video cables to watch a DVD and Video tape from your DVD Recorder & VCR.
To rF in
To rF OUT
To anT inPUT
ꢀ0_ connecting & setting up
Download from Www.Somanuals.com. All Manuals Search And Download.
COnnECTing DVD rECOrDEr & VCr TO THE TV USing THE
aUDiO/ViDEO CaBLE
You can connect your DVD Recorder & VCR to the television using the Audio/Video cable if the appropriate
input is available on the television. You thus:
~
~
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD Recorder & VCR
` Regardless of the type of connection chosen, you must always connect the RF Cable supplied. Otherwise, no picture
will be visible on the screen when the DVD Recorder & VCR is switched off.
M
` Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.
1. Connect the RF Cable.
ꢀ. Connect one end of the Audio/Video cable to the Video output and Audio L, R output jack on the rear of
the DVD Recorder & VCR.
ꢁ. Plug the other end into the appropriate connector on the television.
aerial
aerial cable
rF cable
Yellow
red
White
English _ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
connecting & setting up
COnnECTing THE COMPOnEnT ViDEO CaBLE
You will enjoy high quality accurate colour reproduction images. Component video seperates the picture element
into black and white(Y), blue(PB), red(PR) signals to present most clear and clean images.
1. Connect Component video cables between the COMPOnEnT ViDEO OUT jacks on the rear of the DVD
Recorder & VCR and COMPOnEnT ViDEO inPUT jacks on the rear of the TV.
ꢀ. Connect audio cables between the audio output jacks on the rear of the DVD Recorder & VCR and
aUDiO in jacks on the rear of the TV.
~
~
Take care to respect the colour coding of the up and down channels.
Press the input selector on your TV remote control until the Component signal from the DVD Recorder
& VCR appears on your TV screen.
COMPONENT INPUT
Component cable
(not supplied)
green
Blue
red
` Make sure that the colour coded connections match. That is, the Y, PB and PR component output jacks of your DVD
Recorder & VCR should be connected to the exact corresponding component input jacks on your TV.
Otherwise, red or blue images will be displayed on the TV screen.
M
` Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of progressive scan picture problems, it is recommended that
you switch the connection to the standard defi nition output. If there are questions regarding your Samsung TV set’s
compatibility with this DVD Recorder & VCR, please contact our customer service centre.
ꢀꢀ_ connecting & setting up
Download from Www.Somanuals.com. All Manuals Search And Download.
` See your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s instructions regarding Progressive Scan settings in the TV’s
menu system.
` Depending on your TV, the method of connection may differ from the illustration above.
` What is “Progressive Scan”?
Progressive scan has twice as many scanning lines as the interlace output method has.
Progressive scanning method can provide better and clearer picture quality.
` You must connect the DVD Recorder & VCR to the component(s) before using the Progressive Scan feature.
` The Component jacks will not output video resolutions above 576p.
To view 720p, 1080i and 1080p, connect the DVD Recorder & VCR to your TV with the HDMI cable. (DVD-VR375 only)
COnnECTing HDMi/DVi TO a TV (DVD-Vr375 OnLY)
If your TV has an HDMI/DVI input, connect the HDMI/DVI cable to the TV. You will enjoy the best quality images and
sounds.
Case 1 : Connecting to a TV with HDMi Jack
~
Using the HDMI cable, connect the HDMi OUT jack on the rear of the DVD Recorder & VCR to the HDMi
in jack of your TV.
~
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder & VCR
appears on your TV screen.
HDMi cable
` If the DVD Recorder & VCR is connected to your TV in HDMI 1080p output mode, you must use High
speed(category2) HDMI cable.
M
English _ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
connecting & setting up
Case 2 : Connecting to a TV with DVi Jack
~
~
~
Using the DVI Adapter Cable, connect the HDMi OUT jack on the rear of the DVD Recorder & VCR to the
DVi in jack of your TV.
Using the audio cables, connect the aUDiO (red and white) OUT jacks on the rear of the DVD Recorder &
VCR to the aUDiO (red and white) in jacks of your TV. Turn on the DVD Recorder & VCR and TV.
Press the input selector on your TV remote control until the DVI signal from the DVD Recorder & VCR
appears on your TV screen.
DVi adapter cable
(not supplied)
red
White
` Depending on the HDMI device (TV/HDMI Receiver) you use, audio may not be supported. If TV does not support
Dolby digital/DTS, Audio output is not available when you set Digital output as Bitstream or select DTS On in Audio
setup menu. In this case, set the digital audio output to PCM or DTS off.
J
M
` If you connect the HDMI cable between Samsung TV, you can operate easily DVD Recorder & VCR using the TV
remote control. (This is only available with Samsung TVs that support Anynet+(HDMI CEC).) (See pages 38~39)
` Please check the ' logo (If your TV has an ' logo, then it supports Anynet+ function.)
` To change HDMI output resolution, see page 32.
` HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.
Since HDMI is based on DVI, it is completely compatible with DVI. The only difference between HDMI and DVI is that
HDMI supports multi-channel audio.
Using HDMI, the DVD Recorder & VCR transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
` HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
-
Though the DVD Recorder & VCR uses an HDMI cable, the DVD Recorder & VCR outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the screen.
` Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is
digital. Therefore either a digital-to-analog converter (in the DVD Recorder & VCR) or an analog-to-digital converter
(in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI
technology is superior because it requires no D/A conversion and is a pure digital signal from the DVD Recorder &
VCR to your TV.
` What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via HDMI from
being copied. It provides a secure digital link between a video source (PC, DVD, etc) and a display device
(TV, projector, etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
ꢀꢂ_ connecting & setting up
Download from Www.Somanuals.com. All Manuals Search And Download.
aV rECEiVEr COnnECTiOnS
To take full advantage of the movie theatre experience that DVD offers, you may want to connect your DVD
Recorder & VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound
speakers.
If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD Recorder &
VCR’s built-in Dolby Digital Decoder.
Use the Digital Audio Out connection below.
To enjoy Dolby digital or DTS sound, you must set up the audio settings. (See page 34)
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending.
DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc.
© 1996-2007 DTS, Inc. All Rights Reserved.
Manufactured under licence from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
1. Connect a Digital Audio coaxial cables from the Digital Audio Out jacks on the rear panel of the DVD
Recorder & VCR to their corresponding Digital Audio Input jacks on your A/V Receiver :
To Digital Audio Input of an A/V
Receiver with a Dolby, MPEG2 or DTS
Digital Decoder
rear(L)
rear(r)
Front(L)
Front(r)
Subwoofer
Centre
English _ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
connecting & setting up
COnnECTing EXTErnaL DEViCES
This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs.
~
~
~
Case 1 : Connecting a VCR, Set-Top Box(STB) or DVD Recorder & VCR to the AUDIO/VIDEO AV 1 IN jacks.
Case 2 : Connecting a Camcorder to the AV 2 IN in jacks.
Case 3 : Connecting a DV Device to the DV IN jack
Case1 : Connecting a VCr, Set-Top Box(STB) or DVD recorder & VCr
to the aUDiO/ViDEO aV 1 in jacks
Connecting a VCR or external device to AUDIO/VIDEO AV 1 IN jacks of the DVD Recorder & VCR.
You can record from connected equipment (VCR, STB or DVD).
Yellow
red
White
` You can also use the AV 2 IN jacks on the front panel of the DVD Recorder & VCR.
M
` Copy protected content cannot be recorded.
ꢀꢄ_ connecting & setting up
Download from Www.Somanuals.com. All Manuals Search And Download.
Case 2 : Connecting a Camcorder to the aV 2 in jacks
You can use the AV 2 IN jacks on the front panel of the DVD Recorder & VCR. You can record from
connected equipment.
Audio/Video
Cable
DV Cable
(not supplied)
or
Yellow
red
White
Case 3 : Connecting a DV Device to the DV in jack (DVD-Vr375 only)
If your DV Device has a DV output jack, connect it to the DV input jack of your DVD Recorder & VCR.
• If your camcorder has a DV output jack, see page 60 for more information.
` If the input is not selected automatically, use INPUT SEL. button to select proper input.
M
English _ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
On-SCrEEn MEnU naVigaTiOn
The on-screen menus allow you to enable or disable various functions on your DVD Recorder & VCR.
Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus.
1. ▲▼ Buttons
12:00
Timer
Title List
Timer
Press these buttons on the remote control to move the selection
bar ▲▼ to cycle through the menu options.
Timer - Standard
Timer List
ꢀ. OK Button
Edit
Dubbing
Press this button on the remote control to confirm any new settings.
Disc
Setting
ꢁ. rETUrn Button
Setup
Press this button on the remote control to return to the Previous
menu screen displayed or to exit the on-screen menu.
> Move
sOk
rReturn
eExit
ꢂ. EXiT Button
Press this button to exit the on-screen menu.
PLUg & aUTO SETUP
Your DVD Recorder & VCR will automatically set itself up when it is plugged in for the first time.
TV stations and clock will be stored in memory. The process takes a few minutes.
Your DVD Recorder & VCR will then be ready for use.
1. Connect the RF cable as indicated on page 20.
Initial Installation
-:--
~
Connecting Your DVD Recorder & VCR to the TV using the RF
Cable and Audio/Video cable.
Select the screen language.
✔ English
Français
Español
Deutsch
Italiano
ꢀ. Plug the DVD Recorder & VCR into the mains.
“Auto” in the front panel display flickers.
~
Nederlands
Russian
ꢁ. Press the ▲▼ buttons to select the desired language, then
press the OK button.
> Move
sOk
eExit
ꢂ. Start the auto scanning and then, searching for clock data.
Initial Installation
-:--
ꢃ. Check the date and time.
Searching for receivable channels.
~
if it is : Correct
Press OK button then the data and time will be saved.
15%
~
if it is : Incorrect
Refer to “Clock Set” (See page 30) menu, when you want to
change the date and time.
Scanning... Please wait.
rReturn
eExit
Initial Installation
12:00
Set the time and date.
Day Month Year
01
Hour Min
07 46
01
2008
Tue
:
m Move
sOk
rReturn
eExit
ꢀꢆ_ system setup
Download from Www.Somanuals.com. All Manuals Search And Download.
TUnEr PrESET
1. With the unit in Stop mode/No Disc mode, press the MEnU button.
ꢀ. Press the ▲▼ buttons to select Setup, then press the OK button.
ꢁ. Press the ▲▼ buttons to select Tuner Preset, then press the OK button.
auto Preset
You do not need to preset the stations if you have already set them automatically (See Plug & Auto Setup
on page 28).
Your DVD Recorder & VCR contains a built-in tuner used to receive television broadcasts.
You must preset the stations received through the tuner.
This can be done by:
• Plug & Auto Setup (See page 28)
• Tuner Preset
To setup, follow steps 1~3
1. Press the ▲▼ buttons to select auto Preset, then press the OK
12:00
Auto Preset
Title List
Timer
button.
Searching for receivable channels.
~
The first frequency band is scanned and the station found first
is displayed and stored.
9%
Edit
Scanning... Please wait.
Dubbing
The DVD Recorder & VCR then searches for the second station and so on.
Disc
Setting
~
~
When the automatic scanning procedure has finished, the DVD
Recorder & VCR switches automatically to programme 1.
The number of stations automatically stored by the DVD Recorder
& VCR depends on the number of stations that it has found.
Stop
Setup
sOk
rReturn
eExit
ꢀ. If you wish to cancel the auto scanning before the end, press the OK button.
~
The time and date are set automatically from the broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automatically.
~
Once the auto scanning procedure has finished, some stations may have been stored more than once;
select the stations with the best reception and delete the ones no longer required.
Manual Set
If you have already set the stations automatically, you do not need to preset them manually.
To setup, follow steps 1~3
1. Press the ▲▼ buttons to select Manual Set, then press the OK
Manual Set
button.
Program
Channel
01
08
ꢀ. Press the ▲▼ buttons to select the desired options, then press
AFT
On
the OK button.
Tuner Audio
NICAM
Station Name
> Move
sOk
English _ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
• Program : Press ▲▼ repeatedly to select the programme position (01 to 99) for the channel and press the
OK button.
• Channel : Tune the channel using ▲▼ buttons.
• aFT : Fine tunes the channel to obtain a clearer picture.
If the picture is not clear, select "Off" and press the OK button.
When the fine tuning bar appears, press the ◄ ► buttons to obtain a clearer picture, then press the
OK button.
• Tuner audio : Sets the channels for the NICAM broadcast.
Normally, select "NICAM." If the sound from the NICAM broadcast is not clear, select
"Standard" and then press the OK button.
• Station name : Display station name automatically detected in broadcasting signal. If not detected, you
can edit name by using ▲▼◄ ► buttons.
Channel List
You can swap or delete the desired channel in the channel list.
To setup, follow steps 1~2 on page 29.
ꢁ. Press the ▲▼ buttons to select Channel List, the press the OK
Channel List
Prog.
12:00
button.
Ch
01
--
Name
AAAA
----
▲
1
2
3
4
5
6
The list of all the preset channels appears.
~
Swap : Select the channel you want to swap by pressing the
▲▼ buttons, then press the OK button.
Move the channel by press the ▲▼ buttons, then
press the OK button.
05
07
--
BBB
ARD
----
--
----
▼
~
Delete : Select the channel you want to delete by pressing the
> Move
sSwap
Cancel
rReturn
▲▼ buttons, then press the CanCEL button.
CLOCK SET
1. With the unit in Stop mode, press the MEnU button.
12:00
Setup
Tuner Preset
Clock Set
Video
Title List
Timer
ꢀ. Press the ▲▼ buttons to select Setup, then press the OK
button.
Edit
Audio
ꢁ. Press the ▲▼ buttons to select Clock Set, then press the OK
Features
Options
Dubbing
button.
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
ꢁ0_ system setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Present Time
To setup, follow steps 1~3 on page 30.
12:00
Clock Set
Title List
Timer
ꢂ. Press the ▲▼ buttons to select Present Time, then press the
OK button.
Set the time and date.
Day Month Year
Use the ▲▼◄ ► buttons to input Time, Date or Year.
Use number buttons to input clock data directly.
Edit
01
01
2008
Tue
Dubbing
Hour Min
ꢃ. Press the OK button, then the date and time will be saved.
Disc
Setting
12
:
00
If you don’t press the OK button, it will not be saved.
Setup
m Move
sOk
rReturn
eExit
SETTing UP THE ViDEO OPTiOnS
This function allows you to setup the video setting.
This function depends on disc type. It may not work for some disc types.
1. With the unit in Stop mode, press the MEnU button.
12:00
Setup
Title List
Timer
Tuner Preset
Clock Set
Video
ꢀ. Press the ▲▼ buttons to select Setup, then press the OK
button.
Edit
Audio
ꢁ. Press the ▲▼ buttons to select Video, then press the OK button.
Features
Options
Dubbing
Video setup menu will be displayed.
Disc
Setting
ꢂ. Press the ▲▼ buttons to select the desired video option, then
Setup
press the OK button.
> Move
sOk
rReturn
eExit
ꢃ. Press the ▲▼ buttons to select the desired item, then press the
OK button.
` Press the RETURN button to return to the previous menu.
Press the EXIT ( ) button to exit the menu.
M
TV Type
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
~
16:9 : You can view the full 16:9 picture on your wide screen
TV.
12:00
Video
Title List
Timer
TV Type
:
✔ 16:9
4:3 Letter Box
:
Picture Control
Component Out
Progressive
~
4:3 Letter Box : Select when you want to see the total 16:9
ratio screen DVD supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at the top and bottom
of the screen.
4:3 Pan Scan
:
: Off
Edit
Dubbing
Disc
Setting
Setup
~
4:3 Pan Scan : Select this for conventional size TV when you
want to see the central portion of the 16:9 screen. (Extreme
left and right side of movie picture will be cut off.)
> Move
sOk
rReturn
eExit
English _ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
resolution (HDMi) (DVD-Vr375 only)
This setting is used when the unit is connected by HDMI or DVI to Display devices (TV, Monitor, etc).
~
~
~
~
~
576p : 720 x 576
12:00
Video
Title List
Timer
TV Type
: 16:9
720p : 1280 x 720
1080i : 1920 x 1080i
1080p : 1920 x 1080p
Resolution(HDMI)
Video(HDMI)
Picture Control
Component Out
Progressive
:
✔ Auto
: 1920 x 1080p
1920 x 1080i
Edit
:
1280 x 720p
720 x 576p
:
:
Dubbing
Disc
auto : It will be set to the possible maximum resolution
supported by the TV.
Setting
Setup
~
Connect the DVD-VR375 to your TV via HDMI or DVI.
Set your TV's input to HDMI or DVI.
> Move
sOk
rReturn
eExit
576p 720p 1080i 1080p
- If the DVD Recorder is connected to your TV with Component cables (no HDMI/DVI cable connected),
the output resolution mode toggles between 576p/576i.
- You can also watch VCR output through HDMI (Video is upscaled to a maximum 1080p).
Video (HDMi) (DVD-Vr375 only)
Selects the type of output from the HDMI/OUT jack.
12:00
Video
Title List
Timer
TV Type
: 16:9
~
YCbCr : Normally, select this when connecting to an HDMI
Resolution(HDMI)
Video(HDMI)
Picture Control
Component Out
Progressive
: Auto
device.
: ✔YCbCr
Edit
RGB
:
~
rgB : Gives brighter colours and deeper black.
: On
: On
Dubbing
Select this if colours are weak.
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
Picture Control
Selects the picture control for the video signals output from the AV output jacks.
You can adjust the DVD video signal from the recorder to obtain the
picture quality you want.
12:00
Video
Title List
Timer
TV Type
:
Dynamic1
Picture Control
Component Out
Progressive
: Dynamic2
✔ Standard
:
Select the setting that best suits the programme you are watching.
Cinema1
Cinema2
Personal
Edit
:
Dubbing
~
This function can only be used when you have the Video
Out(AV out) jacks connected and does not work with
Component and HDMI.
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
~
~
Dynamic 1 : Produces a bold dynamic picture by increasing
the picture contrast and the colour.
Dynamic 2 : Produces a more dynamic picture than “Dynamic 1” by further increasing the picture
contrast and the colour.
~
~
Standard : Displays a standard picture (function turned off ).
Cinema 1 : White colours become brighter and black colours become richer,and the colour contrast is
increased.
~
~
Cinema 2 : Enhances detail in dark areas by increasing the black level.
Personal : Adjusts Contrast, Brightness, Colour and Hue using ▲▼◄► buttons.
ꢁꢀ_ system setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Out
Selects whether or not to output video signals from the COMPOnEnT ViDEO OUT jacks.
~
~
On : Outputs the component video signals. Select this when you
want to view progressive signals.
Off : Outputs no signals.
12:00
Video
Title List
Timer
TV Type
: 16:9
Picture Control
Component Out
Progressive
: Standard
✔ On
Edit
Off
Dubbing
Disc
` When you set “AV 1 Output” to “RGB,” you cannot set “Component
Out” to “On.”
Setting
M
Setup
` When you connect the recorder to a monitor or projector via only the
COMPONENT VIDEO OUT jacks, do not select “Off”, as the picture will
not appear.
> Move
sOk
rReturn
eExit
Progressive Scan
This function is available when video output is component. This
setting enables you to select a desired progressive mode. To view
“Progressive scan mode”, first connect the component cable. (See
page 22) Be sure the Component cables are connected properly.
12:00
Video
Title List
Timer
TV Type
: 16:9
Picture Control
Component Out
Progressive
: Standard
: On
Edit
On
✔ Off
Dubbing
~
~
On
Off
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
` When the HDMI cable is connected, “Off” can not be selected.
(DVD-VR375 only)
M
` Progressive setting is only available when the Recorder is in stop mode.
SETTing UP THE aUDiO OPTiOnS
This function allows you to setup the Audio options.
1. With the unit in Stop mode, press the MEnU button.
12:00
Setup
Title List
Timer
Tuner Preset
Clock Set
Video
ꢀ. Press the ▲▼ buttons to select Setup, then press the OK
button.
Edit
Audio
ꢁ. Press the ▲▼ buttons to select audio, then press the OK
Features
Options
Dubbing
button.
Disc
Setting
ꢂ. Press the ▲▼ buttons to select the desired audio option, then
Setup
press the OK button.
> Move
sOk
rReturn
eExit
ꢃ. Press the ▲▼ buttons to select the desired item, then press the
OK button.
` Press the RETURN button to return to the previous menu.
Press the EXIT ( ) button to exit the menu.
M
English _ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
Digital Out
Selects audio options for signals output from the DIGITAL AUDIO
OUT (COAXIAL).
12:00
Audio
Title List
Timer
Digital Out
Downmix
✔ On
Off
The following setup items switches the method of outputting audio
signals when you connect a component such as an amplifier
(receiver) with a digital input jack. For connection details, see "AV
Receiver Connections" on page 24.
Audio DRC
Scan Audio
Surround
: Standard
: On
Edit
: Off
Dubbing
AV Audio Input
: Stereo
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
` If you connect a component that does not accept the selected audio
signal, a loud noise (or no sound) will come out from the speakers, and
may affect your ears or cause speaker damage.
M
12:00
Digital Out
Dolby Digital
DTS
: D-PCM
: Off
Title List
Timer
MPEG
: PCM
Edit
Dubbing
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
Dolby Digital (DVDs only)
Selects the type of Dolby Digital signal.
~
D-PCM : Select this when the recorder is connected to an audio component that does not have a built-
in Dolby Digital decoder.
~
Dolby Digital : Select this when the recorder is connected to an audio component with a built-in Dolby
Digital decoder.
DTS (DVD ViDEOs only)
Selects whether or not to output DTS signals.
~
~
On : Select this when the recorder is connected to an audio component with a built-in DTS decoder.
Off : Select this when the recorder is connected to an audio component without a built-in DTS decoder.
MPEg (DVD ViDEOs only)
Selects the type of MPEG audio signal.
~
PCM : Select this when the recorder is connected to an audio component without a built-in MPEG
decoder. If you play MPEG audio sound tracks, the recorder outputs stereo signals.
~
MPEg : Select this when the recorder is connected to an audio component with a built-in MPEG decoder.
ꢁꢂ_ system setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Downmix (DVDs only)
Switches the method for mixing down to two channels when you
play a DVD which has rear sound elements (channels) or is recorded
in Dolby Digital format.
12:00
Audio
Title List
Timer
Digital Out
Downmix
: On
✔ Dolby Surround
Audio DRC
Scan Audio
Surround
Normal
Edit
: On
~
Dolby Surround : Select this setting to enjoy Multi-channel
DVDs over two channels.
: Off
Dubbing
AV Audio Input
: Stereo
Disc
Setting
~
normal : Multi-channel audio signals are downmixed to two
channels for use with your stereo.
Setup
> Move
sOk
rReturn
eExit
` To enjoy the surround effect of Dolby Digital, turn off the surround settings of this recorder.
M
audio DrC (Dynamic range Control) (DVDs only)
Makes the sound clearer when the volume is turned down when
playing a DVD that conforms to Audio DRC.
12:00
Audio
Title List
Timer
Digital Out
Downmix
: On
: Dolby Surround
~
~
Standard : Normal setting
TV Mode : Makes low sounds clear even if you turn the volume
down.
✔ Standard
Audio DRC
Scan Audio
Surround
TV Mode
Wide Range
Edit
Dubbing
AV Audio Input
: Stereo
Disc
Setting
~
Wide range : Gives you the feeling of being at a live
performance.
Setup
> Move
sOk
rReturn
eExit
audio (HDMi) (DVD-Vr375 only)
Selets the output method from the HDMI OUT jack.
12:00
Audio
Title List
Timer
~
auto : Normal setting. Outputs audio signals according to the
status of the connected HDMI device. If the HDMI OUT jack is
connected to equipment not compatible with Dolby Digital,
PCM will automatically be output, even when “Dolby Digital” is
selected.
Digital Out
: On
Downmix
: Dolby Surround
: Standard
Audio DRC
Audio(HDMI)
Scan Audio
Surround
Edit
✔ Auto
PCM
: Off
Dubbing
Disc
Setting
DV Audio Input
AV Audio Input
: Stereo1
: Stereo
Setup
~
PCM : Converts all audio signals to Linear PCM.
> Move
sOk
rReturn
eExit
Scan audio (DVDs only)
~
~
On : Outputs audio signals during FF1 fast-forward of a DVD
disc with Dolby Digital soundtracks.
Off : Turns off the function. No sound is output during FF1
fast-forward.
12:00
Audio
Title List
Timer
Digital Out
Downmix
: On
: Dolby Surround
: Standard
Audio DRC
Scan Audio
Surround
Edit
✔ On
Off
Dubbing
AV Audio Input
: Stereo
Disc
Setting
` Sound will be interrupted during Scan Audio.
` If the audio format is LPCM, this function is not supported.
Setup
M
> Move
sOk
rReturn
eExit
English _ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
Surround
Turns on the surround function to create virtual rear speakers from a
stereo TV or two separate front speakers.
12:00
Audio
Title List
Timer
Digital Out
Downmix
: On
: Dolby Surround
: Standard
: On
~
~
~
~
Off : No surround effect
Audio DRC
Scan Audio
Surround
Edit
Surround 1 : Creates one set of virtual surround speakers.
Surround 2 : Creates two sets of virtual surround speakers.
Surround 3 : Creates three sets of virtual surround speakers.
✔Off
Dubbing
Surround1
AV Audio Input
Disc
Surround2
Surround3
Setting
Setup
> Move
sOk
rReturn
eExit
` When the playback signal does not contain surround audio signals,
the surround effects will not be heard.
M
` When you select one of the surround modes, turn off the surround settings of the connected TV or amplifier
(receiver).
DV audio input (DVD-Vr375 only)
~
Stereo 1 : Records original sound only. Normally select this
when dubbing a DV format tape.
Stereo 2 : Records additional audio only.
Mix : Records both original and additional sounds.
12:00
Audio
Title List
Timer
Digital Out
: On
Downmix
: Dolby Surround
: Standard
: Auto
~
~
Audio DRC
Audio(HDMI)
Scan Audio
Surround
Edit
: On
Dubbing
✔ Stereo1
Disc
Setting
DV Audio Input
AV Audio Input
Stereo2
Mix
` Select “Stereo 2” or “Mix” if you have added a second audio channel
when recording with your digital video camera.
Setup
M
> Move
sOk
rReturn
eExit
aV audio input
When recording from equipment connected to the AV input jacks to
a DVD disc in this recorder, select AV input audio.
12:00
Audio
Title List
Timer
Digital Out
Downmix
: On
: Dolby Surround
: Standard
: On
~
~
Stereo : Records stereo sound only.
Audio DRC
Scan Audio
Surround
Edit
Bilingual : You can record audio from two different sources on
the left and right channels with DVD-RWs/(VR mode) and
DVD-Rs/(VR mode). You can select either the Main(left) or
Sub(right) soundtrack when playing back.
: Off
Dubbing
AV Audio Input
✔ Stereo
Disc
Setting
Bilingual
Setup
Please refer to the aUDiO button. (See page 49)
> Move
sOk
rReturn
eExit
SETTing UP THE FEaTUrES
This function allows you to setup the Features setting.
1. With the unit in Stop mode, press the MEnU button.
12:00
Setup
Title List
Timer
Tuner Preset
Clock Set
Video
ꢀ. Press the ▲▼ buttons to select Setup, then press the OK button.
ꢁ. Press the ▲▼ buttons to select Features, then press the OK button.
Edit
Audio
ꢂ. Press the ▲▼ buttons to select the desired features options, then
Features
Options
Dubbing
press the OK button.
Disc
Setting
ꢃ. Press the ▲▼ buttons to select the desired item, then press the
Setup
OK button.
> Move
sOk
rReturn
eExit
ꢁꢄ_ system setup
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD auto Chapter
A DVD-Video consists of ‘Titles’ and ‘Chapters’. When you record one programme, it makes one Title.
If you use this function, the Title will be divided into Chapters.
A recording(a title) is automatically divided into chapters by inserting chapter markings at specified intervals.
The markings are inserted while the recording is being made.
XCVKL
DVD-VR375 only
1. Press the ▲▼ buttons to select DVD auto Chapter, then press
12:00
Features
Title List
the OK button.
DVD Auto Chapter
Format DVD-RW
EZ Record
:
Off
: ✔5 Min
Timer
Edit
ꢀ. Press the ▲▼ buttons to select Off, 5 Min or 15 Min, then press
15 Min
:
VCR Function
the OK button.
DVD Bilingual Rec. : Main
DivX Registration Code
Dubbing
~
~
Off : No chapter mark is inserted.
5 Min : Inserts chapter marks at approximately 5 minute
intervals.
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
~
15 Min : Inserts chapter marks at approximately 15 minute
intervals.
Press the EXiT button to exit the menu.
Title
2/2
1/5
ꢁ. Press the rEC button to start recording. (See page 57 about how
Chapter
to set the recording mode)
Time 00:00:52
Audio Dolby
D
2ch(1/1)
ꢂ. Press the STOP button to stop recording.
00:00:52
Remain
<Adjust
sOK
ꢃ. During playback, you can check the created chapters by pressing
the anYKEY button.
` You can create up to 99 chapters.
M
Format DVD-rW
When inserting a unused DVD-RW disc, you can select a recording format (VR mode or Video mode)
according to your needs (Please refer to page 57).
C
~
~
Vr : Automatically formats the disc in VR mode
Video : Automatically formats the disc in Video mode
12:00
Features
Title List
DVD Auto Chapter
Format DVD-RW
EZ Record
: 5 Min
:
✔ VR
Timer
Edit
: Video
VCR Function
DVD Bilingual Rec. : Main
DivX Registration Code
Dubbing
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
English _ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
EZ record
This function allows you Finalise a disc automatically.
CVKL
(V-mode) DVD-VR375 only
1. Press the ▲▼ buttons to select EZ record, then press the OK button.
12:00
Features
Title List
ꢀ. Press the ▲▼ buttons to select On, then press the OK button.
Press the EXiT button to exit the menu.
DVD Auto Chapter
: 5 Min
: VR
Format DVD-RW
EZ Record
Timer
Edit
: On
✔ Off
You can operate EZ Record by using EZ rEC MODE button on the
remote control.
VCR Function
DVD Bilingual Rec. : Main
DivX Registration Code
Dubbing
Disc
Setting
ꢁ. Insert a disc.
Setup
If the disc is a new DVD-RW, it is initialised to V mode automatically.
> Move
sOk
rReturn
eExit
ꢂ. Press the rEC (!) button.
(Using setup menu)
ꢃ. EZ Record function will automatically finalise the disc under the following
conditions.
~
When you press the OPEn/CLOSE button on your DVD
Recorder & VCR after recording on at least 30% of the disc.
The tray will open after the disc has been finalised.
Press [On] to confirm EZ REC mode.
Otherwise, press [Off]
~
The above feature is available only when a DVD-RW(V)/
-R(V)/+R disc is inserted.
On
Off
(Using EZ REC MODE button on the remote control)
` If you select off, you must finalise the disc manually in the Disc
Setting menu. (see page 78)
M
` The length of Recording is different according to recording mode. (see page 57)
` When the EZ Record is set to “On”, a DVD-RW disc will be formatted to V mode automatically, even if you select the
VR mode in the Format DVD-RW option.
anynet+(HDMi CEC) (DVD-Vr375 only)
Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by
connecting the DVD Recorder & VCR to a SAMSUNG TV using an HDMI Cable. (see pages 23~24)
(This is only available with SAMSUNG TVs that support Anynet+.)
1. Press the ▲▼ buttons to select anynet+(HDMi CEC), then press the
12:00
Features
OK button.
Anynet+(HDMI CEC) items will be displayed.
Title List
Timer
DVD Auto Chapter
Format DVD-RW
EZ Record
: 5 Min
: VR
: Off
ꢀ. Press the ▲▼ buttons to select On, then press the OK button
Edit
VCR Function
Anynet+ (HDMI CEC) :
✔ On
Dubbing
Language Follow
:
Off
Disc
Setting
DVD Bilingual Rec. : Main
DivX Registration Code
For using anynet+(HDMi CEC)
Setup
1. Connect the DVD Recorder & VCR to the TV by using an HDMI cable.
> Move
sOk
rReturn
eExit
(
see pages 23~24
ꢀ. Set the Anynet+(HDMI CEC) to “On” on your DVD Recorder & VCR. (see above)
ꢁ. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
)
ꢁꢆ_ system setup
Download from Www.Somanuals.com. All Manuals Search And Download.
~
~
You can operate the DVD Recorder & VCR by using TV remote
control. (TV buttons that can be used to control the DVD Recorder &
DVDR
View TV
Select Device
Record
VCR :
~
,
,
,
,
,
,
and
,
buttons,
button)
Menu on Device
Device Operation
When you press anynet+ button on the TV remote control, the
OSD to the right will appear.
Receiver
Setup
: Off
>
Move
s
Enter
e
Exit
- Select Device : Use this option to select device.
- record : Use this option to start recording or stop recording.
- Menu on Device : Same as MEnU button ( ) on the DVD Recorder & VCR remote control.
- Device Operation : Same as anYKEY button ( ) on the DVD Recorder & VCR remote control.
` By pressing the PLAY button of the recorder while watching TV, the TV screen will change to the play screen.
M
` If you play a DVD when the TV power is off, the TV will power On.
` If you turn the TV off, the DVD Recorder & VCR will power off automatically.(When the DVD recorder & VCR is
recording, it can't be powered off.)
` If you change from HDMI to other sources(Composite, Component, RF... etc) on the TV while playing the a DVD disc,
the DVD Recorder & VCR will stop playing. The DVD Recorder & VCR may keep playing certain discs based on their
content.
Language Follow (DVD-Vr375 only)
This sets the menu language of external devices connected to a
Samsung TV using Anynet +, so they match the language setting of
the TV. To activate this, Anynet+ (HDMI CEC) must be set to On.
12:00
Features
Title List
Timer
DVD Auto Chapter
Format DVD-RW
EZ Record
: 5 Min
: VR
: Off
Edit
VCR Function
~
~
On
Off
Anynet+ (HDMI CEC) : On
Language Follow :
Dubbing
✔ On
Disc
Setting
Off
DVD Bilingual Rec. :
DivX Registration Code
Setup
> Move
sOk
rReturn
eExit
DVD Bilingual rec.
Select the sound to be recorded on the disc.
This setting is not necessary when recording on DVD-RWs(VR mode) that record both the main and sub
sounds.
~
~
Main : Records the main sound for bilingual programmes.
Sub : Records the sub sound for bilingual programmes.
12:00
Features
Title List
Timer
DVD Auto Chapter
Format DVD-RW
EZ Record
: 5 Min
: VR
: Off
Edit
VCR Function
DVD Bilingual Rec. :
✔ Main
Dubbing
DivX Registration Code
Sub
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
DivX registration Code
Please use the Registration code to register this DVD Recorder &
VCR with the DivX Video On Demand format. For more information,
12:00
Features
Title List
Timer
DivX Video On Demand.
Edit
Your registration code is : XXXXXXXX
Dubbing
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
English _ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
SETTing UP THE OPTiOnS
This function allows you to setup the Options setting.
1. With the unit in Stop mode, press the MEnU button.
ꢀ. Press the ▲▼ buttons to select Setup, then press the OK button.
ꢁ. Press the ▲▼ buttons to select Options, then press the OK button.
12:00
Setup
Title List
Timer
Tuner Preset
Clock Set
Video
Edit
Audio
ꢂ. Press the ▲▼ buttons to select the desired options, then press
Features
Options
Dubbing
the OK button.
Disc
Setting
ꢃ. Press the ▲▼ buttons to select the desired item, then press the
Setup
OK button.
> Move
sOk
rReturn
eExit
Language
If you set the language options, in advance, they will come up automatically every time you watch a movie.
1. Press the ▲▼ buttons to select Language, then press the OK
12:00
Language
Title List
Timer
button. Language setup menu will be displayed.
OSD
: English
: English
: Original
: Auto
Disc Menu
Audio
ꢀ. Press the ▲▼ buttons to select the desired language option,
Edit
Subtitle
press the OK button.
Dubbing
~
~
~
~
OSD : For the on-screen menu of your DVD Recorder & VCR.
Disc Menu : For the disc menu contained on the disc.
audio : For the disc audio language.
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
Subtitle : For the disc subtitles.
ꢁ. Press the ▲▼ buttons to select the desired language, then press the OK button.
` If the selected language is not recorded on the disc, the original pre-recorded language is selected.
M
Setting up the Parental
The Parental function works in conjunction with DVDs that have been assigned a rating which helps you control the
types of DVDs that your family watches. There are up to 8 rating levels on a disc.
1. Press the ▲▼ buttons to select Parental, then press the OK
12:00
Create the password
button.
Title List
Timer
When you operate your DVD Recorder & VCR for the first time,
the “Create the password” message will be displayed.
Create the password.
Edit
Dubbing
ꢀ. Enter the 4-digit password using the number buttons on the
remote control.
Disc
Setting
Setup
The “Confirm the password” message will be displayed. Enter
your password again.
0~9 Number
sOk
rReturn
eExit
` Press the RETURN button to return to the previous menu.
Press the EXIT ( ) button to exit the menu.
M
ꢂ0_ system setup
Download from Www.Somanuals.com. All Manuals Search And Download.
if you forgot your password
1. Remove the disc.
ꢀ. Press and hold the PrOg (./,) button on the front panel for 10 seconds or more.
The tray opens and password reverts to the factory settings.
See the below to create a new password.
Setting the rating Level
1. Press the ▲▼ buttons to select rating Level, then press
12:00
Parental
the OK button.
Title List
Timer
Rating Level
:
✔ Off
Change Password
Level8(Adults)
ꢀ. Press the ▲▼ buttons to select the rating Level you want,
Level7
Level6
Level5
Level4
Level3
Level2
Edit
then press the OK button.
Dubbing
For example, if you select up to Level 6, discs that contain Level
Disc
Setting
7, 8 will not play.
A larger number indicates that the programme is intended for
adult use only.
Setup
▼
> Move
sOk
rReturn
eExit
Changing the Password
1. Press the ▲▼ buttons to select Change Password, then press
the OK button.
12:00
Parental
Rating Level
: Off
Title List
Timer
Change Password
The "Enter your password" message will be displayed.
Edit
ꢀ. Enter a new 4-digit password using the number buttons on the
remote control. The “Confirm the password” message will be
displayed.
Dubbing
Disc
Setting
Setup
ꢁ. Enter your new password again using the number buttons on the
> Move
sOk
rReturn
eExit
remote control.
Front Display
Adjusts the lighting of the front panel display.
12:00
Options
~
~
~
auto : Adjusts to low lighting when power is off.
Language
Title List
Timer
Bright : Maintains bright lighting when power is off.
Parental
Front Display
Power Save
Auto Power Off
:
✔ Auto
Dimmer : Maintains low lighting regardless of whether power is
on or off.
Edit
:
:
Bright
Dimmer
Off
Dubbing
Disc
~
Off : Turn off the lighting when power is off.
Setting
Maintains low lighting when power is on.
Setup
> Move
sOk
rReturn
eExit
English _ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
system setup
Power Save
If you set the power save function to "On", the power consumption of this unit is under 1 Watt if Front Display
is set to "Off", and under 2 Watts if Front Display is set to others in standby mode.
~
On: Only antenna input signals are output to the connected TV
when the recorder is in standby mode.
Off : Does not set to power save mode. Normally, select this
setting.
12:00
Options
Title List
Timer
Language
Parental
~
Front Display
Power Save
Auto Power Off
: Auto
:
Edit
On
:
✔ Off
Dubbing
Disc
` The DVD Recorder & VCR does not function following cases in
standby mode, when "Power Save" is set to "On".
- The Anynet features are not available.
Setting
M
Setup
> Move
sOk
rReturn
eExit
- Front display is disappeared in standby.
auto Power Off
This feature automatically turns off your DVD Recorder & VCR, if you do not press any button for the selected
time.
12:00
~
6 Hours : DVD Recorder & VCR will automatically turn off after
6 hours since the last button was pressed.
2 Hours : DVD Recorder & VCR will automatically turn off after
2 hours since the last button was pressed.
Options
Title List
Timer
Language
Parental
~
Front Display
Power Save
Auto Power Off
: Auto
: On
Edit
: 6 Hours
2 Hours
✔ Off
Dubbing
~
~
Off : Auto power off is disabled.
Disc
Setting
If the turn off time set with the Auto Power off function is
reached during playback or recording, the device will operate
until the playback or recording is finished.
Setup
> Move
sOk
rReturn
eExit
` If you turn off and on the DVD Recorder & VCR , the option will be returned to default.
M
VCr Function Setting
This function allows you to setup the VCR setting.
1. With the unit in Stop mode/No Disc mode, press the MEnU button.
ꢀ. Press the ▲▼ buttons to select Setup, then press the OK button.
ꢁ. Press the ▲▼ buttons to select Features, then press the OK button.
ꢂ. Press the ▲▼ buttons to select VCr Function, then press the OK button.
ꢃ. Press the ▲▼ buttons to select the desired VCR option, then press the OK button.
ꢄ. Press the ▲▼ buttons to select the desired item, then press the OK button.
Tape Length
This information is usually printed on the tape box. The menu cycles
12:00
VCR Function
through : E180, E240, E260, E300. Once the cassette type is set, the
VCR can display the amount of time remaining on the tape when you
press the inFO button.
Title List
Timer
Tape Length
E180
Auto Play
✔ E240
Auto Repeat
Colour System
E260
Edit
E300
Dubbing
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
ꢂꢀ_ system setup
Download from Www.Somanuals.com. All Manuals Search And Download.
auto Play
If you want your videotapes to play automatically when you insert
them, turn on Auto Play.
12:00
VCR Function
Title List
Timer
Tape Length
: E240
Auto Play
✔ On
~
On : The VCR will automatically begin playing a video tape
when it is inserted, as long as the safety tab of the
cassette has been removed.
Auto Repeat
Colour System
Off
Edit
: Auto
Dubbing
Disc
Setting
~
Off : Auto play is disabled.
Setup
> Move
sOk
rReturn
eExit
auto repeat
It sets the VCR to play a tape repeatedly (unless a tape control is
activated : Stop, Fast Forward or Rewind).
12:00
VCR Function
Title List
Timer
Tape Length
Auto Play
: E240
: On
~
~
On
Off
Auto Repeat
Colour System
On
Edit
✔ Off
Dubbing
Disc
Setting
Setup
> Move
sOk
rReturn
eExit
Colour System
Before recording or playing back a tape, you can select the required
system standard.
12:00
VCR Function
Title List
Timer
Tape Length
Auto Play
: E240
: On
~
auto : When playing back a tape, the system standard is
Auto Repeat
Colour System
: Off
automatically selected by the DVD Recorder & VCR.
Edit
✔ Auto
PAL
Dubbing
~
~
~
PaL : PAL video system
MESECaM
B/W : Black and White.
MESECAM
Disc
B/W
Setting
Setup
> Move
sOk
rReturn
eExit
English _ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
playback
This section introduces basic functions of playback and playback by disc type.
Read the following information before playing a disc.
rEgiOn CODE (DVD-ViDEO OnLY)
Both the DVD Recorder & VCR and the discs are coded by region. These regional codes must match in
order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this DVD
Recorder & VCR is described on the rear panel of the DVD Recorder & VCR.
LOgOS OF DiSCS THaT Can BE PLaYED
Dolby Digital
DTS
Digital Audio
PAL broadcast system in U.K,
France, Germany, etc.
Stereo
DivX
MP3
ꢂꢂ_ playback
Download from Www.Somanuals.com. All Manuals Search And Download.
DiSC TYPES THaT Can BE PLaYED
Recorded
content
Disc Types
Disc Logo content
Disc Shape
Single sided (12cm)
Double sided (12cm)
Single sided (8cm)
Double sided (8cm)
Single sided (12cm)
Single sided (8cm)
Single sided (12cm)
Single sided (8cm)
Single sided(12cm)
Single sided (8cm)
Single sided (12cm)
Single sided (8cm)
AUDIO
VIDEO
DVD-VIDEO
AUDIO-CD
JPEG
AUDIO
JPEG Image
MP3 Audio
MPEG4 Movie
MP3
MPEG4
Single Layer (12cm)
(4.7GB)
AUDIO
VIDEO
DVD-RAM
DVD-RW
DVD-R
Dual Layer (12cm)
(8.5GB)
AUDIO
VIDEO
12cm (4.7GB)
Single Layer (12cm)
(4.7GB)
AUDIO
VIDEO
Dual Layer (12cm)
(8.5GB)
AUDIO
VIDEO
DVD+RW
DVD+R
12cm (4.7GB)
Single Layer (12cm)
(4.7GB)
AUDIO
VIDEO
Dual Layer (12cm)
(8.5GB)
English _ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
playback
Discs that cannot be played
~
~
~
DVD-Video with a region number other than “4” or “ALL”
3.9 GB DVD-R Disc for Authoring.
A DVD-RW(V)/-R(V)/+R disc which has been recorded and not finalised in a different manufacturer’s
recorder.
~
~
~
DVD-ROM/PD/MV-Disc, etc
VCD/SVCD/CVD/CD-ROM/CDV/CD-G/CD-I
BD, HD-DVD
` This DVD Recorder & VCR can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
M
` Playback and/or recording may not work for some types of discs, or when specific operations, such as angle change
and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please
refer to this if necessary.
` Do not allow the disc to become dirty or scratched, finger prints, dirt, dust, scratches or deposits of cigarette smoke
on the recording surface may make it impossible to use the disc for recording.
` DVD-RAM/ RW/ R discs may not be able to play on some DVD players, depending on the player, disc and the
condition of the recording.
` Discs with NTSC programmes recorded on them can be played but cannot be recorded using this product.
PLaYing a DiSC
1. Press the OPEn/CLOSE button.
ꢀ. Place a disc gently into the tray with the disc’s label facing up.
ꢁ. Press the OPEn/CLOSE button to close the disc tray.
~
~
The DVD Recorder & VCR does not play discs automatically after being powered on initially.
When the DVD Recorder & VCR is powered on and a disc is in the tray, the unit will be activated and
wait in stop status.
~
Press the PLaY( ) button to start playback.
ꢂ. Press the STOP( ) button to stop playback.
` When you stop playing back a disc, the DVD Recorder & VCR remembers where you stopped, so when you press
M
PLAY ( ) button again, it will pick up where you left off . (Unless the disc is removed or the DVD Recorder & VCR is
unplugged, or if you press the STOP ( ) button twice.)
` Do not move your DVD Recorder & VCR while playing, as this may cause damage to the disc.
J
` Make sure to press the OPEN/CLOSE button to open or close the disc tray.
` Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction.
` Do not place foreign materials on or in the disc tray.
` Some functions may perform differently or be disabled depending on the disc type.
If this occurs, refer to the instructions written on the disc case.
` Be especially careful that children’s fingers are not caught between the disc tray and the tray chassis when it closes.
` After turning power on, it will take a few seconds until the DVD Recorder & VCR operates.
ꢂꢄ_ playback
Download from Www.Somanuals.com. All Manuals Search And Download.
USing THE DiSC MEnU & TiTLE MEnU
Some type of discs contain a dedicated menu system that allows you to select special functions for title, chapter,
audio track, subtitle, film preview, information on characters, etc.
For DVD-ViDEO Disc
Z
Disc Menu : Press the DiSC MEnU button to enter the disc menu of the disc.
• Move to the setup menu related to playback operation.
• You can select audio language and subtitle etc. provided by the disc.
Title Menu : Press the TiTLE MEnU button to move to the title menu of the disc.
• Use this button if the disc contains more than one title.
Some discs may not support the title menu functionality.
For DVD-raM/ rW/ r Disc
XCVKL
Title List
Press the TiTLE LiST button. Title List is a list of previously recorded programmes.
If a title is deleted, that title cannot be played again.
Play List (DVD-raM/-rW(Vr)/-r(Vr))
Press the PLaYLiST button. A playlist is a custom-made list of titles. When one playlist is played, only the
titles within the playlist will play and then stop. Even if that playlist is deleted, the original recording will not be
deleted.
USing THE PLaYBaCK rELaTED BUTTOnS
Searching through a Chapter or Track
ZXCVBKLD
) buttons on the remote control.
During play, press the SEarCH (
Each time you press the SEarCH button, the playback speed will change as follows.
)
)
FF1/
(
(
FR1
)
)
FF2/
(
(
FR2
FR1
DVD-VIDEO/DVD-
RAM/ RW/ R
FF3/
FR3
FF1/
MPEG4
)
)
FF1
FF1/
)
FF2
)
FF3
(
FR1
)
FF2/
(
FR2
AUDIO CD (CD-DA)
~
~
You can scan the programme in reverse.
To return to normal speed playback, press the PLaY ( ) button.
`
`
You can hear sound during forward search (FF1) in DVD-VIDEO/DVD-RAM/ RW/ R disc.
The speed marked in this function may be different from the actual playback speed.
M
English _ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
playback
Skipping Chapters, Titles or Markers
ZXCVBKLD
) buttons on the remote control.
During play, press the SKiP (
~
if you press the SKiP ( ) button,
it moves to the beginning of the chapter or Title or marker
Pressing the button once again within 3 seconds returns to the beginning of the previous chapter or Title or
marker (DVD-RAM/-RW(VR mode))
~
if you press the SKiP ( ) button,
it moves to the next chapter or track. (DVD-RAM/-RW(VR mode))
Slow Motion Play
ZXCVKLD
) buttons on the remote control.
In pause mode, press the SEarCH (
~
~
~
if you press the SEarCH ( ) button,
Slow 3 * Slow 2 * Slow 1
if you press the SEarCH ( ) button,
Slow 3 & Slow 2 & Slow 1
*
&
To return to normal speed playback, press the PLaY ( ) button.
` Slow motion can play only in the forward direction on MPEG4 discs.
M
Step Motion Play
ZXCVKLD
During pause mode, press the F.aDV/SKiP buttons on the remote control.
~
~
Each time the button is pressed, a new frame will appear.
To return to normal speed playback, press the PLaY ( ) button.
` No sound is heard during STEP or SLOW mode.
M
Skipping ahead 30 seconds
ZXCVKL
In play mode, press F.aDV/SKiP button to skip ahead exactly 30 seconds.
USing THE anYKEY BUTTOn
The anYKEY functions allows you to easily search for a desired scene by accessing title, chapter, track and time.
You can also change the subtitle and audio settings and set some features including Angle.
ꢂꢆ_ playback
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving to a desired scene directly
ZXCVKLD
If you want to move to a certain title, chapter or time, use this function.
1. Press the anYKEY button during playback.
ꢀ. Press the ▲▼ buttons to select Title, Chapter or Time.
Title
2/6
ꢁ. Press the ◄► buttons to select the desired scene.
(When searching a time, enter the time in the sequence of hours,
minutes, seconds using the number buttons.)
Chapter
2/12
Time 00:00:52
Audio ENG Dolby
D
5.1ch(1/1)
00:00:52
Remain
Subtitle 1/2 ENG
Angle 1/1
ꢂ. Then, press the OK button.
<Adjust
sOk
M
` This may not work for some discs. When an audio CD (CD-DA) or an MP3 disc is inserted, according to the disc type,
the information display may not be appear.
` The Time Search function does not operate on some discs.
` To make the sub-menu disappear, press the ANYKEY or RETURN button again.
Selecting the audio language
Audio languages may not work depending on the disc type. This is only available during playback.
You can also operate this function by pressing the aUDiO button on the remote control.
ZD
1. Press the anYKEY button during playback.
ꢀ. Press the ▲▼ buttons to select audio, then press the ◄ ►
Title
Chapter
Time
2/6
buttons to select the desired audio language.
2/12
00:00:52
ENG Dolby
00:00:52
1/2 ENG
1/1
ꢁ. Press the OK button.
Audio
D
5.1ch(1/1)
Remain
Subtitle
Angle
<Adjust
sOk
` Audio languages may be different because they are disc-specific.
M
` Some discs allow you to select the audio language for the disc menu only.
` To make the sub-menu disappear, press the ANYKEY or RETURN button again.
remain
You can check the remaining time of the current title.
1. Press the anYKEY button during playback.
Title
Chapter
Time
2/6
3/12
00:00:52
ENG Dolby
00:00:52
1/2 ENG
1/1
Audio
D
5.1ch(1/1)
Remain
Subtitle
Angle
>Move
English _ꢂꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
playback
Selecting the Subtitle Language
ZD
This enables you to select the available subtitle languages on a disc.
Subtitle languages may not work depending on the disc type. This is only available during playback.
You can also operate this function by pressing the SUBTiTLE button on the remote control.
1. Press the anYKEY button during playback.
ꢀ. Press the ▲▼ buttons to select Subtitle, then press the ◄ ►
Title
2/6
buttons to select the desired subtitle language.
Chapter
3/12
Time 00:00:52
ꢁ. Press the OK button.
Audio ENG Dolby
D
5.1ch(1/1)
00:00:52
Remain
Subtitle 1/2 ENG
Angle 1/1
<Adjust
sOk
` The subtitle display may be different depending on the disc type.
M
` Some discs allow you to select the language for the disc menu only.
` To make the sub-menu disappear,press the ANYKEY or RETURN button again.
Changing the Camera angle
Z
If a DVD-VIDEO contains multiple angles of a particular scene, you can use the Angle function.
If the disc contains multiple angles, the Angle appears on the screen.
1. Press the anYKEY button during playback.
ꢀ. Press the ▲▼ buttons to select angle, then press the ◄ ►
Title
Chapter
Time
2/6
3/12
buttons or number (0~9) buttons to select the desired angle
scene.
00:00:52
ENG Dolby
00:00:52
1/2 ENG
1/1
Audio
D
5.1ch(1/1)
Remain
Subtitle
Angle
ꢁ. Press the OK button.
<Adjust
sOk
` This function is disc-dependent, and may not work all DVDs.
M
` This function does not work when a DVD has not been recorded with a multi-camera angle system.
` To make the sub-menu disappear, press the ANYKEY or RETURN button again.
ꢃ0_ playback
Download from Www.Somanuals.com. All Manuals Search And Download.
PLaYing an aUDiO CD/MP3
Buttons on the remote Control used for audio CD(CD-Da)/MP3
playback
button : Returns to the beginning of the current track
when pressed during playback. If pressed again, your DVD
Recorder & VCR moves to and plays the previous track.
If you press this button within three seconds after playback
starts, the previous track will be played. If you press this
button after three seconds, the current track will be replayed
from the beginning.
Press the (
/
) buttons : Fast Play (FF1/FR1,FF2/FR2)
(Audio CD only)
button : Stops a track (song).
▲▼ button : Selects a track (song).
button : Plays the next track.
button : Pauses playback.
ꢅ
ꢆ
button : Plays a track (song).
OK button : Plays the selected track (song).
Playing an audio CD(CD-Da)
1. Insert an audio CD (CD-DA) into the disc tray.
~
The audio CD menu appears and the tracks (songs) are played automatically.
ꢀ. Press the ▲▼ buttons to select the track (song) you want to hear, and then press the OK button.
audio CD(CD-Da) Screen Elements
Current track (song) : Displays the number of the track
currently being played.
Music
12:00
This shows the operating state of a disc and a playback time
corresponding to a portion that is currently played.
((
)) Surround : Off
Q TRACK01.CDA
Play
00:00:19
♫
1/15
q
♫
♫
♫
♫
♫
♫
TRACK01.CDA
TRACK01.CDA
TRACK01.CDA
TRACK01.CDA
TRACK01.CDA
TRACK01.CDA
Display the track list (song list).
Display the current file.
> Move
sOk
eExit
Display available buttons.
English _ꢃ1
Download from Www.Somanuals.com. All Manuals Search And Download.
playback
Playing an MP3 Disc
1. Insert an MP3 disc into the disc tray.
~
The menu is displayed
ꢀ. Press the ▲▼ buttons to select Music, then press the OK button.
ꢁ. Press the ▲▼ buttons to select the track you want to hear, and then press the OK button.
MP3 Screen Elements
Current track (song) : Displays the number of the track
currently being played.
Music
12:00
This shows the operating state of a disc and a playback time
corresponding to a portion that is currently played.
((
)) Surround : Off
Q SONG01.MP3
Play
00:00:19
E \
q
♫
♫
♫
♫
♫
♫
SONG01.MP3
SONG02.MP3
SONG03.MP3
SONG04.MP3
SONG05.MP3
SONG06.MP3
Displays the track list (song list).
Displays the current file.
♫
1/15
Displays available buttons.
> Move
sOk
rReturn
eExit
` If select the Music, MP3 files will only be displayed.
M
` If there are no MP3 files, empty folder will only be displayed.
PLaYing BaCK a PiCTUrE DiSC
G
1. Insert a JPEG Disc into the disc tray.
Photo
12:00
Picture 1 / 10
Slideshow
ꢀ. Press the ▲▼ buttons to select the Photo, and then press the OK button.
ꢁ. Press the ▲▼◄► buttons to select a picture.
~
~
To see the next 6 pictures, press the
To see the previous 6 pictures, press the [ button.
]
button.
ꢂ-1. If you press the PLaY ( ) button, the Slide Show Speed
screen will appear.
Page 1 / 2
m Move
sOk
rReturn
@Stop
Press the ◄► buttons to set the slide show speed, then press
the OK button.
Photo
12:00
Picture 1 / 10
Slideshow
ꢂ-ꢀ. Press the OK button with a picture selected in the Album screen
and select a display mode (album screen ( ),
Slide show ( ), rotation ( ) or Zoom ( )) using the ◄ ►
buttons, then press the OK button.
Slideshow Speed
: Returns to the Album screen.
Page 1 / 2
: The unit enters slide show mode.
<Adjust
sOk
rReturn
Before the slide show begins the picture interval (Slide show
speed) must be set.
: Each time the OK button is pressed, the picture rotates 90
degrees clockwise.
: Each time the OK button is pressed, the picture is enlarged
up to 4X(Four times the normal size).
JPEG01.JPG
normal size
2X
4X
2X
<Move
s
Ok
rReturn
Anykey
ꢃꢀ_ playback
Download from Www.Somanuals.com. All Manuals Search And Download.
~
~
Press the anYKEY button to display the menu bar.
Press the anYKEY button again to clear the menu bar.
` If select the Photo, JPEG files will only be displayed.
M
` If there are no JPEG files, empty folder will only be displayed.
Music/Photo Simultaneous Playback
Music
12:00
1. Insert a Mixed disc(Music+JPEG) into the disc tray.
((
)) Surround : Off
ꢀ. Press the ▲▼ buttons to select Mix, and then press the OK
Q SONG01
:00:19
button.
E /
♫
1/15
Do you want to view
the photo with MP3?
The track list will be displayed.
ꢁ. Press the OK button.
Yes
No
The message "Do you want to view the photo with MP3?" will be
displayed.
> Move
sOk
rReturn
eExit
ꢂ. Press the ◄► button to select Yes, then press the OK button.
You can listen to the music while watching the photo.
` To operate this function, you have to select the disc containing both music files and photo file.
M
PLaYing an MPEg4 DiSC
1. Insert an MPEG4 disc into the disc tray.
DivX
Album
12:00
File
~
The menu is displayed
Stop
00:00:19
ꢀ. Press the ▲▼ buttons to select DivX, and then press the OK button.
E \
1/2
3
3
DIVX01.AVI
DIVX02.AVI
ꢁ. Press the ▲▼ buttons to select the avi file (DivX), then press the
OK or PLaY ( ) button.
ꢂ. When DivX file is played, you can use following functions.
Pressing the STOP ( ) button once during playback will display
the file list, pressing the button again will exit the menu screen.
> Move
sOk
rReturn
eExit
MPEg4 Function Description
Function
Description
) buttons, it moves previous or next track.
) buttons and press again to search at a faster
FR2 FF3/ FR3 FF1/ FR1)
Skip Scene
During play, press the SKIP (
During play, press the SEARCH (
speed.
Search Scene
()
FF1/(
FR1
)
FF2/
(
)
(
)
(
In pause mode, press the SEARCH ( ) button on the remote control.
Slow 3 * Slow 2 * Slow 1) Reverse Slow Motion Play is not available.
Slow Motion
Step Motion
(*
In pause or play mode, press the F.ADV/SKIP button on the remote control.
English _ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
playback
` This unit can play the following video compression formats,
- DivX Video (Codec) Format : DivX 3.11 DivX 4.x DivX 5.x (without QPEL and GMC)
- DivX Audio (Codec) Format : MP3, AC3, DTS
M
` Supported subtitle file formats : .smi, .srt, .sub, .txt, .ass (The subtitle file should have exactly the same name to
corresponding DivX file name)
` Some DivX files created on a personal computer may not be play back. That is why Codec Type, Version and Higher
resolution over specification are not supported.
` You cannot play back the disc that is larger than a 720 x 576 pixel resolution.
PLaYing BaCK a VHS TaPE (VCr)
1. Insert a standard VHS tape into the VCR deck.
• When a videotape is inserted, power will turn on automatically.
2. Press the PLAY ( ) button on the remote control or on the front panel of the unit.
The videotape will begin to play automatically if the Record Safety Tab is removed
and Auto Play is turned on.
Record safety Tab
3. Press the STOP ( ) button on the remote control or on the front panel of the unit.
Tracking
The Tracking adjustment removes the white lines that sometimes appear during playback because of slight
differences in recording decks.
During playback, press the PrOg/TrK (,/.) buttons to remove white lines from the picture.
Special VCr Playback Features
While a videotape is playing, you can enjoy a variety of special playback features.
Pause
In Play mode, press PaUSE ( ) button to pause a single frame.
Frame advance
In the Pause mode, press F.aDV/SKiP button to advance to the next frame.
FPS/rPS
In Play mode, press Forward ( ) button or rewind ( ) button to FPS/RPS at two speeds:
~
Picture Search - Press and release repeatedly to advance the tape forward or backward at 2, 3, 5, 7 times
normal speed.
~
Jet Search - Press and hold to advance the tape forward or backward at 7 times normal speed.
Skip
In Play mode, press F.aDV/SKiP button to cue ahead exactly 30 seconds.
Press F.aDV/SKiP button repeatedly up to 4 times to cue ahead 2 minutes.
Slow motion
In Pause mode, press ( ) button for slow motion. Press the ( ) button repeatedly to play slow motion
speed at 1/10, 1/7, 1/5 normal speed. Press the PLaY button twice to resume normal viewing.
ꢃꢂ_ playback
Download from Www.Somanuals.com. All Manuals Search And Download.
Variable Search System
Each time you record a cassette on this DVD Recorder & VCR, an index is automatically marked on the tape
when recording is started.The Search function allows you to fast-forward or rewind to a specific index and
start playback from that point.
~
This DVD Recorder & VCR uses a standard indexing system (VISS).
As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.
go to Zero
Use this feature when you want to search for the 0:00:00 counter
position on a cassette.
Go to Zero
1. Press the CanCEL button at the point on the tape where you
End search
want to set the counter to 0:00:00.
Forward Intro Scan
Reverse Intro Scan
ꢀ. While the cassette is stopped, press the anYKEY button.
>Move
sOk
ꢁ. Press the ▲▼ buttons to select go to Zero, then press the OK
button.
The VCR will rewind or fast forward, searching for the 0:00:00
counter position, and then automatically stop at that position.
End search
Use this feature when you want to search for a blank position to
record a programme on a cassette.
Go to Zero
1. While a cassette is stopped, press the anYKEY button.
End search
Forward Intro Scan
Reverse Intro Scan
ꢀ. Press the ▲▼ buttons to select End search, then press the OK
button.
>Move
sOk
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.
If the VCR reaches the end of the tape during end search, the
tape will be ejected.
Forward/reverse intro Scan
Use scan and play when you don’t know exactly where a programme
is located on a cassette tape.
Go to Zero
1. While a cassette is stopped, press the anYKEY button.
End search
ꢀ. Press the ▲▼ buttons to select Forward intro Scan or reverse
intro Scan, then press the OK button. When an Index mark is
found the DVD Recorder & VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index
mark.
Forward Intro Scan
Reverse Intro Scan
>Move
sOk
English _ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
recording
This section shows various DVD Recording & VCR methods.
This unit can record on various types of discs.
Before recording, read the following instructions and select the disc type according
to your preference.
rECOrDaBLE DiSCS
This DVD Recorder & VCR can record on the following discs.
~
DVD-VR370
DVD-RAM
DVD-RW
DVD-RW
DVD-R
DVD-R
~
DVD-VR375
DVD-RAM
DVD+RW
DVD+R
~
~
DVD RWs and DVD-RAMs are rewritable.
DVD Rs are non-rewritable.
Compatibility between Samsung and Other Company’s recorder
~
X : not possible
Additional Recording in
Samsung Recorder
Disc Types
Recording format Recording Device
Finalising
Samsung
VR Mode
X
Recordable
Recordable
DVD-RAM
DVD-RW
Other Company
X
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
X
Not recordable
Samsung
VR Mode
Recordable
Not recordable
Other Company
Recordable
Not recordable
Samsung
V Mode
Recordable
Not recordable
Other Company
Not recordable
Not recordable
Samsung
VR Mode
Recordable
Not recordable
Other Company
Recordable
DVD-R
Not recordable
Samsung
V Mode
Recordable
Not recordable
Other Company
Not recordable
Samsung
Not recordable in some cases
Not recordable in some cases
Not recordable
DVD+RW
(DVD-VR375 only)
-
Other Company
X
finalised
not finalised
finalised
not finalised
Samsung
Not recordable in some cases
Not recordable
DVD+R
(DVD-VR375 only)
-
Other Company
Not recordable in some cases
ꢃꢄ_ recording
Download from Www.Somanuals.com. All Manuals Search And Download.
` Finalise
M
- This closes the DVD-RW/ R so no additional recording can be done.
- The DVD-RAM/+RW disc cannot be finalised.
` Unfinalise
- This allows additional recording on a DVD-RW disc originally recorded on the DVD Recorder & VCR.
- A DVD-RW disc that has been recorded by DAO(Disc At Once) on a PC cannot be unfinalised.
- A DVD-RW disc that has been recorded in Video Mode of a different maker’s recorder cannot be unfinalised.
- A DVD R disc cannot be unfinalised.
recording Formats
Since available functions differ depending on the disc type, select a disc that best fits your preferences.
When you insert an unused disc, the following message appears.
<DVD-RAM/ RW/+R>
~
DVD-RAM/ RW/+R : Format will be started automatically.
~
DVD-R : Initialising the disc is unnecessary.
DVD-raM/-rW(Vr)/-r(Vr)
Unformatted Disc.
~
This mode involves multiple editing functions (such as deletion of the
whole title, partial deletion of a title, etc.).
Formatting. Please wait.
~
Various editing options using a created Playlist.
DVD-rW(V)/-r(V)
~
Chapters will be created automatically when you finalise recording on
DVD-RW/DVD-R discs in Video mode.
~
Simple editing (erasing titles/changing title name).
rECOrDing MODE
With the unit in Stop mode, select one of eight recording modes by pressing the rEC SPEED button repeatedly for
the desired recording time and picture quality. In general, picture quality improves as the recording time decreases.
In AUTO mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc
and length of the timer recording.
Recording Times
DVD-RAM/ RW/ R
Recording Mode
HQ (high quality mode)
Approx. 1 hour
Approx. 1 hour 30 minutes
Approx. 2 hours
HSP
SP (standard quality mode)
LSP
Approx. 2 hours 30 minutes
Approx. 3 hours
ESP
LP (long recording mode)
EP
Approx. 4 hours
Approx. 6 hours
SLP (long duration mode)
Approx. 8 hours
~
The dual layer DVD Rs have approximately double the capacity of single layer DVD Rs.
English _ꢃꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
recording
UnrECOrDaBLE PiCTUrES
Pictures with copy protection cannot be recorded on this DVD Recorder & VCR.
When the DVD Recorder & VCR receives a copy guard signal while recording,
recording stops and the following message appears on the screen.
You cannot record.
The disc is protected.
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have one of the following three signal types,
Copy-Free, Copy-Once and Copy-Never.
If you want to record a copy-once type programme, use DVD-RW with CPRM in VR Mode and DVD-RAM
discs.
Signal type
Copy-Free
Copy-Once
Copy-Never
Media
DVD-RAM (Ver.2.0)
DVD+RW
O
O
O
O
O*
-
-
-
-
-
DVD+R
-
DVD-RW (Ver.1.1)
-
DVD-RW (Ver.1.1)
with CPRM
VR mode
O*
-
-
-
O
O
V mode
DVD-R
O
-
-
Once “Copy Once” has been recorded, recording cannot be done anymore.
* Compatible with CPRM.
❖ Content Protection for recordable Media (CPrM)
CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some
DVD Recorders & VCR, but not by many DVD players.
Each blank recordable DVD has a unique 64-bit media ID etched in the BCA.
When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher
derived from the media ID.
Disc contents cannot be copied to other media.
ꢃꢆ_ recording
Download from Www.Somanuals.com. All Manuals Search And Download.
rECOrDing iMMEDiaTELY
XCV KL
DVD-VR375 only
Before you start
1. Make sure antenna cable is connected.
DVD
VR
SP
AV 1
-RW
ꢀ. Press the OPEn/CLOSE button and place a recordable disc on
the disc tray.
ꢁ. Check the remaining time on the disc.
DVD-RAM/DVD RW/+R discs should be formatted or initialised in advance
before beginning recording. Most new discs are sold unformatted. Make
sure to format your unformatted discs before recording.
ꢂ. Press the OPEn/CLOSE button to close the disc tray.
Wait until LOaD disappears from the front panel display.
recording the current programme you are watching
1. Press the PrOg/TrK (,/.) buttons or number buttons to select the station you want to record.
ꢀ. Press the rEC SPEED button repeatedly, to select the recording Speed (quality).
HQ HSP SP LSP ESP LP EP SLP
ꢁ. Press the rEC button.
recording from external equipment you are watching
1. Power on your DVD Recorder & VCR and switch to AV mode by pressing the inPUT SEL. button on the
remote control. The front panel display changes in the following sequence.
Pr aV1 aV2 DV (DVD-Vr375 only)
ꢀ. Press the rEC SPEED button repeatedly to select the recording Speed (quality).
HQ HSP SP LSP ESP LP EP SLP
ꢁ. When your DVD Recorder & VCR is in the Stop mode, set the operation mode of your external devices to
play mode.
ꢂ. Press the rEC button on your DVD Recorder & VCR when the image from which you want to start
recording is displayed.
To stop recording
Press the STOP button to stop a recording in progress.
~
When using DVD-RAM/DVD RW/ R discs, the message “Updating the information of disc. Please wait for
a moment.” is displayed.
` You can not change the recording mode and the programme while recording.
M
` Recording will stop automatically if there is no free space left for recording.
` Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, up to 49 titles onto a DVD+RW/+R disc.
`
If the power interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc.
` Recording will stop automatically if a copy protected image is selected.
` Do not use DVD-R authoring discs with this unit.
` Also refer to the user manual for your External Devices when recording from external equipment using the Audio/
Video cable.
English _ꢃꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
recording
rECOrDing THrOUgH THE DV inPUT JaCK (DVD-Vr375 OnLY)
You may control a Camcorder connected to the DV Input jack on the DVD Recorder & VCR.
Follow these directions to record onto a disc or tape from a camcorder that has a DV output jack.
1. Connect the DV output jack of your camcorder to the DV input
DV
(
@
#
*
+
)
!
jack on the front of your DVD Recorder & VCR using a DV cable.
ꢀ. Power on your DVD Recorder & VCR and switch to DV mode by
pressing the inPUT SEL. button on the remote control.
ꢁ. Press the rEC SPEED button repeatedly to select the recording
Speed (quality).
HQ HSP SP LSP ESP LP EP SLP
< Move
sOk
Exit
ꢂ. If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of
the screen.
ꢃ. Select the Playback related icons on the upper part of the screen to playback the camcorder and find the
starting position for dubbing.
ꢄ. To start recording, Press the ◄ ► buttons to select rEC (!) icon in the top side of the screen, then
press the OK button.
You can press the rEC button on the remote control to start recording.
ꢅ. Press the STOP button on your DVD Recorder & VCR when the recording is finished.
` Some camcorders may not work with your DVD Recorder & VCR even if they have a DV output jack.
M
` Also refer to the user manual for your camcorder when recording through a DV jack.
` To display playback related icons on the screen, press any direction button on the remote control.
` You cannot dub from a camcorder onto a videotape through the DV Input jack on this unit.
MaKing a OnE TOUCH rECOrDing (OTr)
One-Touch Recording (OTR) allows you to add recording time in preset minute increments up to 8 hours by
pressing the rEC button repeatedly.
XCVKL
DVD-VR375 only
1. Press the PrOg/TrK (,/.) buttons or number buttons to select the station to record. If you want to
record through a connected external component, press the inPUT SEL. button to select an appropriate
external input [Prog., AV1, AV2 or DV input (DVD-VR375 only)].
ꢀ. Press the rEC button.
ꢁ. While in Record mode, press the rEC button again to activate One-Touch Recording (OTR).
~
Record length 0:30 appears on the On-Screen Display and the DVD Recorder & VCR will record for
exactly 30 minutes.
ꢂ. Continue press the rEC to add recording time in preset minute increments up to 8 hours.
➞ 0:30 ➞ 1:00 ➞ 1:30 ➞ 2:00 ➞ 2:30 ➞ 3:00 ➞ 3:30 ➞ 4:00 ➞ 4:30 ➞ 5:00 ➞ 5:30 ➞ 6:00 ➞ 6:30 ➞ 7:00 ➞ 7:30 ➞ 8:00 ➞ Normal
~
The DVD Recorder & VCR stops recording automatically when the time has elapsed.
ꢄ0_ recording
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop recording
Press the STOP ( ) button.
The message “Press STOP button once more to cancel Timer Record” is displayed.
Press the STOP ( ) button again.
The message “Updating the information of disc. Please wait for a moment” is displayed.
` The timer counter decreases by the minute from the recording time set to 0:00, then the DVD Recorder & VCR stops
recording.
M
MaKing a TiMEr rECOrDing
Make sure the Clock (Setup-Present Time) must be set before you proceed with a timer recording.
(See pages 30~31)
XCV KL
DVD-VR375 only
12:00
Timer
Title List
Timer
1. With the unit in Stop mode, press the MEnU button.
Timer - Standard
Timer List
ꢀ. Press the ▲▼ buttons to select Timer, then press the OK
button.
Edit
ꢁ. Press the ▲▼ buttons to select Timer-Standard, then press the
Dubbing
OK button.
Disc
Setting
ꢂ. Set timer recording option.
Setup
~
Fill the input items using the ▲▼◄► buttons and number
buttons.
> Move
sOk
rReturn
eExit
◄► : Moves to the previous/next item,
▲▼, 0~9 : Sets a value.
~
~
Media : Select the media to record DVD or VCR
Date : Timer Recording allows setting the recording time within one month period.
Set the recording day. (month/day)
Timer - Standard
12:00
No. Media
Date
Start
End
Prog.
Mode
Edit
►
31/01
30/01
29/01
Sun
01
02
03
04
05
06
No.01
►
Media
Date Start End
Today 12 00 12: 11 Prog. 1 SP
Prog. Mode
DVD
►
Mon-Fri
Mon-Sat
Sun-Sat
:
►
►
►
02/01
01/01
> Adjust
<
Move
rReturn
eExit
Today
~
~
Start/End Time : Start and end time of the timer recording.
Prog. : The video input source (Prog.1, AV1 or AV2), or the broadcasting channel you want to make a
timer recording from.
English _ꢄ1
Download from Www.Somanuals.com. All Manuals Search And Download.
recording
❖ recording Mode (DVD)
aUTO : Select when you want to set video quality automatically. In AUTO mode, the most suitable record
mode is adjusted automatically, according to remaining time on the disc and length of the timer recording.
This function is selected only one mode in HQ, HSP, SP, LSP, ESP, LP, EP and SLP modes and you can
use this mode for timer recording.
HQ : Approx. 1 hour
HSP : Approx. 1 hour 30 minutes
SP (standard quality) : Approx. 2 hours
LSP : Approx. 2 hours 30 minutes
ESP : Approx. 3 hour
LP : Approx. 4 hour
EP (extended mode) : Approx. 6 hour
SLP (long duration mode) : Approx. 8 hours
The dual layer DVD Rs have approximately double the capacity of single layer DVD Rs.
❖ recording Mode (VCr)
aUTO : Select when you want to set video quality automatically.
It depends on remaining time on the VCR tape.
SP : Standard Play, for best picture quality.
LP : Long Play, for maximum recording time (2 times SP).
ꢃ. Press the OK button.
If the timer settings overlap
The first programme has priority.
After recording of the first programme is complete, the second programme starts being recorded.
ꢄ. Turn the power off to finish the Timer Recording setting.
~
~
will blink if disc or tape is not inserted.
will appear on the front panel. It means that a timer recording is registered.
Timer Recording will not work when the power is on.
` The timer recording time may differ from the set time depending on disc status and overall timer recording status
(for example, recording times overlapping, or when the previous recording ends within 3 minutes before the start
time of the next recording.)
M
ꢄꢀ_ recording
Download from Www.Somanuals.com. All Manuals Search And Download.
EDiTing THE TiMEr LiST
Follow these directions to edit the timer record list.
XCV KL
DVD-VR375 only
12:00
1. With the unit in Stop mode, press the MEnU button.
Timer
Title List
Timer
Timer - Standard
Timer List
ꢀ. Press the ▲▼ buttons to select Timer, then press the OK button.
ꢁ. Press the ▲▼ buttons to select the Timer List, then press the
Edit
OK button.
Dubbing
Disc
ꢂ. Press the ▲▼ buttons to select the number of the Timer List
Setting
you want to edit, then press the OK button.
Setup
~
The Edit and Delete items are displayed.
> Move
sOk
rReturn
eExit
ꢃ. Press the ▲▼ buttons to select Edit, then press the OK button.
Timer List
No. Media
12:00
~
The Timer List screen is displayed. Edit the items you want to
modify.
See the Timer List section for more information on Timer List
Input items. (See pages 61~62)
Date
01/01
--/--
Start
12:00
--:--
End
Prog.
Mode
Edit
►
01
02
03
04
05
06
DVD
---
12:00 Prog. 1
Edit
Delete
--:--
--:--
--:--
--:--
--:--
----
----
----
----
----
►
---
--/--
--:--
---
---
---
---
►
---
--/--
--:--
►
ꢄ. Press the OK button to confirm the edited setting.
---
--/--
--:--
►
ꢅ. Press the EXiT button after finishing the operation.
---
--/--
--:--
►
The menu screen will disappear.
m Move
sOk
rReturn
eExit
DELETing THE TiMEr LiST
Follow these directions to delete a title from the timer record list.
XCV KL
DVD-VR375 only
1. With the unit in Stop mode, press the MEnU button.
Timer List
12:00
ꢀ. Press the ▲▼ buttons to select Timer, then press the OK button.
ꢁ. Press the ▲▼ buttons to select the Timer List, then press the OK button.
No. Media
Date
Start
End
Prog.
Mode
Edit
►
01
02
03
04
05
06
►
Do you want to erase "No. 01"?
ꢂ. Press the ▲▼ buttons to select the number of the Timer List you
--/--
----
►
►
Cancel
want to delete, and then press the OK button.
OK
--:--
--:--
►
~
The Edit and Delete items are displayed.
---
---
►
ꢃ. Press the ▲▼ buttons to select Delete, then press the OK button.
m Move
sOk
rReturn
eExit
~
You will be prompted with the delete confirm message such as
(“Do you want to erase "No.01"?”).
ꢄ. Press the ◄ ► buttons to select OK, then press the OK button.
The selected title will be deleted from the list.
~
ꢅ. Press the EXiT button after finishing the operation.
The menu screen will disappear.
` You can not delete programmes that are currently being recorded.
M
English _ꢄꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
recording
BaSiC VCr rECOrDing
Before starting
1. Check TV channel and Antenna connections.
2. Check the remaining time on the tape.
You can record a TV show in progress by inserting a blank tape and pressing the
!
(REC) button.
You can even add time in preset increments up to 6 hours by pressing the
!
(REC) button repeatedly.
` Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece
M
J
of tape.
` Warning : Do not cover this opening unless you are sure you want to record over the tape.
1. Insert a blank VHS tape into the VCR deck.
Make sure the tape is long enough to record the entire programme.
~
ꢀ. Press the number buttons or the PrOg/TrK (,/.) buttons to select the desired channel.
Press the inPUT SEL. button to select Prog.1, AV1, AV2 or DV input (DVD-VR375 only).
if recording from an external device connected to the input jacks of the recorder.
ꢁ. Press the rEC SPEED button on the remote control to set the Record Speed to one of the following
options:
~
~
SP – Standard Play, for best picture quality.
LP – Long Play, for maximum recording time (2 times SP).
` The selected Record Speed will appear on the front panel display and on-screen display.
M
Maximum recording Time - SP vs. LP
Tape Length
E180
SP (Standard Play)
Approx. 3 hrs
Recording Times Data Rates
Approx. 6 hrs
E240
Approx. 4 hrs
Approx. 8 hrs
E260
Approx. 4 hrs 40 mins
Approx. 5 hrs
Approx. 9 hrs 20 mins
Approx. 10 hrs
E300
` When you watch or record on the VCR during DVD Recording, some function buttons may not operate.
M
ꢂ. Press the
!
(rEC) button on the remote control or front panel.
For options while recording is in progress, see “Special Recording Features”.
To stop recording
Press the STOP button to stop a recording in progress.
ꢄꢂ_ recording
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECK rEMaining TiME
Press inFO button on the remote control.
The following information will be displayed.
(Current deck status, recording Mode, remaining time, input channel,
current time.)
DVD-RW
VCR
Stop
Stop
0:00:37
LP
0:00:00
SP
Rem 01:59
Prog. 1
Rem 02:00
Prog. 1
SPECiaL rECOrDing FEaTUrES
While a recording is in progress, you can watch a different media, or add recording time in preset increments.
1. Watch a different media during recording
You can watch a DVD during VCR recording or watch a Video tape during DVD recording.
~
During VCR recording, insert a DVD in the DVD deck. The output will automatically change to the DVD
and start playback. (DVD-Video discs only)
~
During DVD recording, insert a Video tape in the VCR deck.
The output will automatically change to the VCR and start playback.
(Only if tape is missing the safety tab)
ꢀ. add recording Time
Refer to the One-Touch Recording (OTR).
(See page 60)
ꢁ. recording DVD and VCr at the same time
You can record DVD and VCR at the same time, but both modes must be set up to record separately.
~
~
~
~
Press the DVD/VCr button to set the unit to DVD or VCR mode.
Choose input mode Prog.1, AV1, AV2 or DV input (DVD-VR375 only) for DVD or VCR.
Choose rEC SPEED for DVD or VCR.
Press rEC button for DVD or VCR.
` When the DVD Recorder & VCR is connected to your TV using the HDMI or component video cables, the VCR's
playback screen on the video tape will not display during DVD recording.
M
` You cannot record different channels at the same time.
` The DVD and VCR cannot start recording at the exact same time.
English _ꢄꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
recording
DUBBing TO DVD Or ViDEO
You can copy from the DVD to VIDEO or VIDEO to DVD.
Check the remaining time on the tape and disc.
Dubbing from DVD to VCr
XCVKL
DVD-VR375 only
1. With the unit in Stop mode, press the MEnU button.
12:00
Dubbing
Title List
Timer
-
Simple Dubbing
VIDEO > DVD
ꢀ. Press the ▲▼ buttons to select Dubbing, then press the OK
-
DVD > VIDEO
button.
Edit
ꢁ. Press the ▲▼ buttons to select Simple Dubbing, then press the
Dubbing
OK button.
Disc
Setting
ꢂ. Press the ▲▼ buttons to select DVD ➞ ViDEO, then press the
Setup
OK button.
> Move
sOk
rReturn
eExit
The Message "Do you want to copy DVD contents to Video?" will
be displayed.
12:00
Dubbing
ꢃ. Press the ◄► buttons to select Yes, then press the OK button.
Title List
Ti
Simple Dubbing
Do you want to copy DVD contents to Video?
Direct dubbing DVD to ViDEO
E
Dubb
Yes
No
~
~
~
Insert a DVD disc you want to dubbing.
Insert a VHS tape.
Press the VCR dubbing button on front panel or remote control.
(TO VCR)
D
Sett
Setup
> Move
sOk
rReturn
eExit
~
To stop recording, press the STOP button.
` Dubbing function is not allowed in progressive scan mode.
M
` You can record VCR in a state of HDMI connected. But you cannot dubbing from the DVD to VCR. (DVD-VR375 only)
ꢄꢄ_ recording
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing from VCr to DVD
XCVKL
DVD-VR375 only
1. With the unit in Stop mode, press the MEnU button in stop
12:00
Dubbing
mode.
Title List
-
Simple Dubbing
VIDEO > DVD
-
DVD > VIDEO
Timer
ꢀ. Press the ▲▼ buttons to select Dubbing, then press the OK
Edit
button.
Dubbing
ꢁ. Press the ▲▼ buttons to select Simple Dubbing, then press
Disc
Setting
the OK button.
Setup
ꢂ. Press the ▲▼ buttons to select ViDEO ➞ DVD, then press the
OK button.
> Move
sOk
rReturn
eExit
The Message "Do you want to copy video contents to DVD?"
will be displayed.
12:00
Dubbing
Title List
Tim
Simple Dubbing
ꢃ. Press the ◄► buttons to select Yes, then press the OK button.
Do you want to copy video contents to DVD?
E
Dubb
Yes
No
D
Setting
Setup
> Move
sOk
rReturn
eExit
Direct dubbing VCr to DVD
~
~
~
~
Insert the VHS tape you want to dub.
Insert a Recordable DVD disc.
Press DVD dubbing button on front panel or remote control. (TO DVD)
To stop recording press the STOP button.
DV DUBBing (DVD-Vr375 OnLY)
Before DV Dubbing, connect the DV output jack of camcorder to the DV input jack of DVD Recorder & VCR using a
DV cable.
1. With the unit in Stop mode, press the MEnU button in stop
12:00
Dubbing
Title List
mode.
Simple Dubbing
DV Dubbing
Timer
ꢀ. Press the ▲▼ buttons to select Dubbing, then press the OK
Edit
button.
Dubbing
ꢁ. Press the ▲▼ buttons to select DV Dubbing, then press the OK
Disc
Setting
button.
Setup
> Move
sOk
rReturn
eExit
English _ꢄꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
recording
DV Simple Dubbing
You can find the dubbing start point to record on a disc easily by using the DV Simple Dubbing function.
To setup, follow steps 1~3 on page 67.
ꢂ. Press the ▲▼ buttons to select DV Simple Dubbing, then the
12:00
DV Dubbing
OK button.
The DV Tape Mode screen will be displayed.
Title List
Timer
DV Simple Dubbing
DV One Touch Dubbing
Edit
ꢃ. Select the playback related buttons using the ◄ ► button to find
Dubbing
the dubbing start point.
Disc
Setting
ꢄ. If you find start point, press the ◄ ► button to select ● (Record),
then press the OK button.
Setup
> Move
sOk
rReturn
eExit
Dubbing starts.
DV
(
@
#
*
+
)
!
< Move
sOk
Exit
DV One Touch Dubbing
You can record the entire contents of a DV format tape onto a disc easily by using the DV One Touch
Dubbing function.
To setup, follow steps 1~3 on page 67.
ꢂ. Press the ▲▼ buttons to select DV One Touch Dubbing, then
12:00
DV Dubbing
press the OK button.
DVD Recorder & VCR rewinds the tape in the digital video
Title List
DV Simple Dubbing
DV One Touch Dubbing
Timer
camera and then starts recording the tape contents from the
Edit
beginning.
Dubbing
Disc
When playback of the tape stops, One Touch Dubbing ends
automatically.
Setting
Setup
> Move
sOk
rReturn
eExit
` You cannot dub from a camcorder onto a videotape through the DV Input jack on this unit.
M
ꢄꢆ_ recording
Download from Www.Somanuals.com. All Manuals Search And Download.
editing
This section introduces basic functions of DVD editing and explains both edit
functions for the recording on a disc and edit functions for the entire disc.
PLaYing THE TiTLE LiST
Follow these instructions to play back a title from the Title List.
XCVKL
DVD-VR375 only
1. Press the TiTLE LiST button.
The Title List screen is displayed.
ꢀ. Press the ▲▼ buttons to select a title you want to play from Title List, and then press the PLaY button.
ꢁ. Press the STOP button to stop playing.
To return to the title list screen, press the TiTLE LiST button.
Title List Screen Elements
Playback screen for recorded titles
Information window for the selected title: Title name,
recording date, lock status, recording mode
DVD
-RAM
Title List (Original)
1/4
12:00
No.
Title
Length
Edit
01
02
03
04
AV1
AV1
AV1
AV1
00:00:11
00:00:09
00:01:36
00:00:11
►
►
►
►
Recorded title No.
AV1
Recorded title name
4
01.Jan.2008
12:06
1
LSP
Recording Length (i.e., the playing time)
Button display
> Move
sOk
rReturn
eExit
DVD
-RAM
Title List (Original)
1/4
12:00
No.
Title
Length
Edit
Edit menu
Play : Plays the selected title.
01
02
03
04
AV1
AV1
AV1
AV1
Play
Title Erase
Chapter Erase
Title Erase : Erase the selected title from the list.
Chapter Erase : Erase the selected chapter from the title.
Protect : Locks or unlocks the selected title.
Title Name : Changes the name of a selected title.
A-B Erase : Erase the selected section (scene) from the title.
Divide Title : Divide a title into two.
Protect
Title Name
A-B Erase
Divide Title
AV1
ꢅ
4
01.Jan.2008
12:06
1
LSP
> Move
sOk
rReturn
eExit
` This may depend on the type of disc.
M
` DVD-RW(V)/+RW/-R(V)/+R discs have limited editing functions.
English _ꢄꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
editing
BaSiC EDiTing (TiTLE LiST)
renaming (Labeling) a Title (Title name)
Follow these instructions to rename a title list, i.e., to edit the title of a recorded programme.
XCVKL
DVD-VR375 only
Title Name
12:00
1. Press the TiTLE LiST button.
Sports(A1)_
The Title List screen is displayed.
a
f
c
e
j
A
F
B
G
L
C
H
D
I
E
J
b
g
d
i
1
6
-
2
3
8
4
9
=
#
(
5
0
.
ꢀ. Press the ▲▼ buttons to select a title you want to rename from
h
m
r
7
_
n
s
x
o
K
P
U
Z
M
R
N
S
X
O
T
Y
k
p
l
+
the Title List, then press the OK button.
q
@
Q
V
t
~
!
$
)
y
u
z
v
w
W
%
^
&
ꢁ. Press the ▲▼ buttons to select Title name, then press the OK
button.
Backspace
Space
Delete
Clear
Finish
The Title Name screen is displayed.
m Move
sOk
rReturn
eExit
ꢂ. Select the desired characters using the ▲▼◄ ► buttons, press
the OK button.
DVD
Title List (Original)
3/4
12:00
-RAM
~
~
Backspace : Deletes the character before the cursor.
Space : Enters a blank and moves the cursor one forward
(to the right).
No.
Title
Length
Edit
01
02
03
04
AV1
AV1
00:00:11
00:00:09
00:01:36
00:00:11
►
►
►
►
Sports(A1)
AV1
~
~
~
Delete : Deletes the character at the cursor position.
Clear : Deletes all the character inputs.
Finish : Registers the character inputs.
Sports(A1)
01.Jan.2008
12:06
4
1
LSP
> Move
sOk
rReturn
eExit
ꢃ. Press the ▲▼◄ ► buttons to select Finish, and then press the
OK button.
The changed title name is displayed in the title field of the selected title.
Locking (Protecting) a Title
Follow these instructions to lock a title to protect it from accidental deletion.
XCVKL
(VR mode) DVD-VR375 only
1. Press the TiTLE LiST button.
DVD
-RAM
Title List (Original)
3/4
12:00
The Title List screen is displayed.
ꢀ. Press the ▲▼ buttons to select a title you want to protect from
the Title List, then press the OK button.
Select the protection
status for this title.
ꢁ. Press the ▲▼ buttons to select Protect, then press the OK
Sports(A1)
01.Jan.2008
12:06
button.
4
On
Off
1
LSP
ꢂ. Press the ◄ ► buttons to select On, then press the OK button.
> Move
sOk
rReturn
eExit
The key icon on the information window for the selected title
changes to the locked status. (
→
)
DVD
-RAM
Title List (Original)
3/4
12:00
No.
Title
Length
Edit
01
02
03
04
AV1
00:00:11
00:00:09
00:01:36
00:00:11
►
►
►
►
AV1
Sports(A1)
AV1
Sports(A1)
4
01.Jan.2008
12:06
0
LSP
> Move
sOk
rReturn
eExit
ꢅ0_ editing
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing a Title (Title Erase)
Follow these instructions to erase a title from the Title List.
XCVKL
DVD-VR375 only
1. Press the TiTLE LiST button.
DVD
Title List (Original)
1/4
12:00
-RAM
The Title List screen is displayed.
Do you want to erase
"No.01"?
ꢀ. Press the ▲▼ buttons to select a title you want to erase from the
(If you have created a Playlist
or Dubbing list with this title.
part of that Playlist or Dubbing
list will also be erased.)
Title List, then press the OK button.
ꢁ. Press the ▲▼ buttons to select Title Erase, then press the OK
button.
AV1
4
01.Jan.2008
12:06
OK
Cancel
1LSP
You will be prompted with a confirmation message.
DVD-RAM(VR), DVD-RW(VR mode) : Since Playlist is present, the
message ‘Do you want to erase "No. 01"? (If you have created a
> Move
sOk
rReturn
eExit
Playlist or Dubbing list with this title, part of that Playlist or Dubbing list will also be erased.)’ is displayed.
DVD-RW(Video mode), DVD+RW, DVD+R, DVD-R(V) : Since Playlist is not present, the message ‘Do you
want to erase "No. 01"?’ is displayed.
~
The message depends on the type of disc.
ꢂ. Press the ◄ ► buttons to select OK, then press the OK button.
` You cannot erase a protected title.
If you want to erase a protected title, select “Off” in the Title Protection menu.
M
` Once a title is erased from the Title List, it cannot be recovered.
` Once DVD-RW/DVD R is finalised, it cannot be erased.
` With DVD R, titles are only erased from the menu, however, the Title remains physically on the disc.
Erasing a chapter (Chapter Erase)
Follow these instructions to erase a chapter from the Title List.
XCV
(VR mode)
1. Press the TiTLE LiST button.
DVD
Chapter Erase (Original)
12:00
-RAM
The Title List screen is displayed.
Chapter No. 1 / 7
Title No.01
Check
ꢀ. Press the ▲▼ buttons to select a title you want to erase from the
Erase
Title List, then press the OK button.
01
00:00:03
02
05
00:00:42
00:00:11
03
06
00:00:04
ꢁ. Press the ▲▼ buttons to select Chapter Erase, then press the
OK button.
04
00:00:03
00:00:04
The Chapter Erase screen is displayed.
m Move
sOk
rReturn
eExit
ꢂ. Press the ▲▼◄► buttons to select a chapter you want to erase
from the Title List, then press the OK button. Check is selected.
To preview the chapter, then press the OK button.
When you press the rETUrn button, the display returns to
Chapter Erase (Original).
DVD
-RAM
Chapter Erase (Original)
12:00
Title No.01
Chapter No. 1 / 7
Do you want to erase "No.01"?
01
ꢃ. Press the ▲▼ buttons to select Erase, then press the OK
button.
OK
Cancel
You will be prompted with a confirmation message.
The Message "Do you want to erase "No. 01"?" is displayed.
0
m Move
sOk
rReturn
eExit
ꢄ. Press the ◄► buttons to select OK, then press the OK button.
The selected chapter is erased from the title.
To erase other chapters, repeat from step 4.
English _ꢅ1
Download from Www.Somanuals.com. All Manuals Search And Download.
editing
` You can also erase chapters from a Playlist title.
M
` If you erase an original title used in a Playlist, that Playlist is also erased.
Erasing a section of a Title (a-B Erase)
Follow these instructions to erase a section of a Title List entry.
XCVK
(VR mode) DVD-VR375 only
1. Press the TiTLE LiST button.
DVD
-RAM
A-B Erase
12:00
Title No. 03
Start
The Title List screen is displayed.
ꢀ. Press the ▲▼ buttons to select a title you want to edit from the
Title List, then press the OK button.
End
Start 00:00:02
Erase
ꢁ. Press the ▲▼ buttons to select a-B Erase, then press the OK
►
00:00:02
button.
Title No. 2
Finish
End 00:00:00
4
01.Jan.2008 14:15
The A-B Erase screen is displayed.
> Move
sOk
rReturn
eExit
ꢂ. Press the OK button at the starting point.
The image and starting point time are displayed in the section
deletion starting point window.
DVD
-RAM
A-B Erase
12:00
Title No. 03
ꢃ. Press the OK button at the end point.
The image and end point time is displayed in the Section deletion
ending point window.
Start
End
Start 00:00:02
Erase
Finish
■
00:00:15
ꢄ. Press the ▲▼ buttons to select Erase, then press the OK
Title No. 2
End 00:00:15
4
01.Jan.2008 14:15
button.
> Move
sOk
rReturn
eExit
ꢅ. Press the ◄ ► buttons to select OK, then press the OK button.
The selected section has been deleted.
To return to the Title List, press the ▲▼ buttons to select Finish.
DVD
-RAM
A-B Erase
12:00
Title No. 03
Do you want to erase?
Erased part will not be restored.
OK
Cancel
End 00:00:15
4
01.Jan.2008 14:15
> Move
sOk
rReturn
eExit
❖ a-B Erase Screen Elements
Playback bar
Section deletion starting point window and time
Playtime
DVD
-RW
A-B Erase
12:00
Title No. 02
Start
End
Start 00:00:02
Erase
Finish
Section deletion end point window and time
►
00:00:02
Title No. 2
• Select the start and end points of the section you
want to delete using the playback related buttons.
End 00:00:00
4
01.Jan.2008 14:15
> Move
sOk
rReturn
eExit
•
Playback related buttons : (
,
,
,
,
,
)
ꢅꢀ_ editing
Download from Www.Somanuals.com. All Manuals Search And Download.
` The length of the section to be deleted must be at least 5 seconds long.
` End point cannot be marked earlier than start point.
M
` The section cannot be deleted when it includes a still picture.
Dividing a title into two (Divide Title)
Follow these instructions to divide a title into two.
XCVK
(VR mode)
1. Press the TiTLE LiST button.
DVD
-RAM
Divide Title (Original)
12:00
The Title List screen is displayed.
Title No. 01
ꢀ. Press the ▲▼ buttons to select a title you want to divide from the
Point
Title List, then press the OK button.
Divide
Start 00:00:00
ꢁ. Press the ▲▼ buttons to select Divide Title, then press the OK
button.
►
00:00:02
Title No. 1
End 00:00:00
4
01.Jan.2008 14:15
The setting the dividing point screen is displayed.
The Point is selected.
> Move
sOk
rReturn
eExit
ꢂ. Press the OK button at the point where you want to divide the title.
DVD
-RAM
Divide Title (Original)
12:00
The Divide is selected.
Title No. 01
ꢃ. Press the OK button.
You will be prompted with a confirmation message.
The Message “Do you want to divide title “No.01”?” is displayed.
To reset the dividing point, select no and press the OK button,
then repeat from step 4. The display asks whether you want to
rename the title. To use the same name as before, select No and
press the OK button to finish.
Do you want to divide title "No. 01"?
►
Yes
No
En0000:00
4
01.Jan.2008 14:15
> Move
sOk
rReturn
eExit
ꢄ. Press the ◄► buttons to select Yes, then press the OK button. The Title Name screen is displayed.
ꢅ. Follow steps 3 to 5 of renaming (Labeling) a Title (See page 70) to complete renaming.
The devided title appears in the Title List with the new name.
aDVanCED EDiTing (PLaYLiST)
Creating a Playlist
Follow these instructions to create a new playlist title from a recorded title.
XCV
(VR mode)
1. With the unit in Stop mode, press the MEnU button.
DVD
-RAM
Create Playlist
12:00
Scene No. 01
Start
ꢀ. Press the ▲▼ buttons to select Edit, then press the OK button.
ꢁ. Press the ▲▼ buttons to select Create Playlist, then press the
OK button.
End
Start 00:00:01
Make
The Create Playlist screen is displayed.
►
00:00:01
Playlist No. 01
Finish
ꢂ. Press the OK button at the start point.
End 00:00:00
4
01.Jan.2008 14:15
~
~
~
The image and time at the start point are displayed on the Start
window.
Select the starting point of the section from which you want to create a new scene using the playback
related buttons.
> Move
sOk
rReturn
eExit
Playback related buttons : (
,
,
,
,
,
)
ꢃ. Press the OK button at the end point.
~
The image and end point time are displayed in the End window.
English _ꢅꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
editing
- To make a new playlist -
ꢄ. Press the ▲▼ buttons to select Make, then press the OK button.
A new Make Scene screen is displayed.
DVD
-RAM
Create Playlist
12:00
Scene No. 01
A new Scene will be added to the current Playlist.
Start
End
Start 00:00:01
Make
` You can check and see all the scenes on the Edit Playlist screen.
(See page 71)
►
00:00:01
M
Playlist No. 01
Finish
End 00:00:00
4
01.Jan.2008 14:15
` Repeat steps 1~5 if you want to make a new playlist.
` Repeat steps 4~5 if you want to make scenes of the playlist.
> Move
sOk
rReturn
eExit
- To return to Edit Playlist menu -
ꢅ. Press the ▲▼ buttons to select Finish, then press the OK
DVD
-RAM
Playlist
1/3
12:00
button. The Edit Playlist screen is displayed.
No.
Title
Length
Edit
01
02
03
AV1
AV1
00:00:11
00:00:25
00:00:05
►
►
►
Sports(A1)
` You can create up to 99 playlist titles.
M
AV1
` Depending on the kind of disc, the displayed screen may be slightly
different.
4
01.Jan.2008
12:06
> Move
sOk
rReturn
eExit
` A disc that is recorded on this unit cannot be displayed playlist menu
if EZ Record set to "On".
Playing Titles in the Playlist
Follow these instructions to play the playlist titles.
XCV
(VR mode)
1. Press the TiTLE LiST button with the disc stopped, then press
the PLaY LiST button.
DVD
-RAM
Playlist
1/3
12:00
No.
Title
Length
Edit
The Edit Playlist screen is displayed.
01
02
03
AV1
AV1
AV1
Play
Title Erase
ꢀ. Press the ▲▼ buttons to select the title you want to play from the
Title Name
Playlist, then press the OK button.
AV1
4
01.Jan.2008
ꢁ. Press the ▲▼ buttons to select Play, then press the OK button.
12:06
The playlist titles will be played back.
> Move
sOk
rReturn
eExit
ꢂ. Press the STOP button to stop playing.
The screen returns to the Edit Playlist screen.
` When the Title list or Playlist screen is displayed, you can toggle the Title list and Playlist by pressing the PLAY LIST
button.
M
ꢅꢂ_ editing
Download from Www.Somanuals.com. All Manuals Search And Download.
renaming a Playlist Title
Follow these instructions to rename a playlist title, i.e. to edit the title of a playlist title.
XCV
(VR mode)
12:00
1. Press the TiTLE LiST button with the disc stopped, then press
Title Name
the PLaY LiST button.
The Edit Playlist screen is displayed.
Dolphin_
a
f
c
e
A
F
B
G
L
C
H
D
I
E
J
b
g
d
i
1
6
-
2
3
8
4
9
=
#
(
5
0
.
j
h
m
r
7
_
ꢀ. Press the ▲▼ buttons to select the title you want to rename from
n
s
x
o
K
P
U
Z
M
R
N
S
X
O
T
Y
k
p
l
+
q
@
Q
V
t
~
!
$
)
the Playlist, then press the OK button.
y
u
z
v
w
W
%
^
&
ꢁ. Press the ▲▼ buttons to select Title name, then press the OK
Backspace
Space
Delete
Clear
Finish
button.
m Move
sOk
rReturn
eExit
The Title Name screen is displayed.
ꢂ. Enter the desired characters using the ▲▼◄ ► buttons.
DVD
Playlist
3/4
12:00
Length
-RAM
~
~
Backspace : Moves the cursor one position backwards.
Space : Enters a blank and moves the cursor one forward
(to the right).
No.
Title
Edit
01
02
03
04
AV1
AV1
00:00:11
00:00:09
00:01:36
00:00:11
►
►
►
►
Dolphin
AV1
~
~
~
Delete : Deletes the character at the cursor position.
Clear : Deletes all the character inputs.
Finish : Registers the character inputs.
Dolphin
4
01.Jan.2008
12:06
> Move
sOk
rReturn
eExit
ꢃ. Press the ▲▼◄ ► buttons to select Finish, then press the OK
button.
The changed title is displayed in the title field of the selected playlist title.
Deleting a Playlist Title from the Playlist
1. Press the TiTLE LiST button with the disc stopped, then press
the PLaY LiST button.
Playlist
2/2
12:00
The Edit Playlist screen is displayed.
Do you want to erase
"No.02"?
ꢀ. Press the ▲▼ buttons to select the title you want to delete from
the Playlist, then press the OK button.
OK
Cancel
AV1
ꢁ. Press the ▲▼ buttons to select Title Erase, then press the OK
4
01.Jan.2008
12:06
button.
> Move
sOk
rReturn
eExit
ꢂ. Press the ◄► buttons to select OK, then press the OK button.
After the delete operation is complete, it will automatically return
to the Edit Playlist screen.
English _ꢅꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
editing
DiSC SETTing
Menu items may vary, depending on the existence of a recorded title.
Editing the Disc name
Follow these instructions to give a name to a disc.
XCVKL
DVD-VR375 only
1. With the unit in Stop mode, press the MEnU button.
Disc Name
12:00
ꢀ. Press the ▲▼ buttons to select Disc Setting, then press the OK
Disc_
A
a
f
c
e
j
B
C
H
D
I
E
J
b
g
d
i
1
6
-
2
3
8
4
9
=
#
(
5
0
.
button.
F
K
P
U
Z
G
L
h
m
r
7
_
n
s
x
o
ꢁ. Press the ▲▼ buttons to select Disc name, then press the OK
M
R
N
S
X
O
T
Y
k
p
l
+
q
@
Q
V
t
~
!
$
)
button.
y
u
z
v
w
W
%
^
&
The Disc Name screen is displayed.
Backspace
Space
Delete
Clear
Finish
ꢂ. Enter the desired characters using the ▲▼◄ ► buttons.
m Move
sOk
rReturn
eExit
~
~
Backspace : Deletes the character before the cursor.
Space : Enters a blank and moves the cursor one forward (to
Disc Setting
12:00
the right).
Title List
Timer
Disc Name
: Disc
~
~
~
Delete : Deletes the character at the cursor position.
Clear : Deletes all the character inputs.
Disc Protect
Disc Format
Disc Finalise
: Not Protected
: VR Mode
Edit
: Unfinalised
Disc Information
Erese All Titles
Finish : Registers the character inputs.
Dubbing
Disc
Setting
ꢃ. Press the ▲▼◄ ► buttons to select Finish, then press the OK
Setup
button.
A disc name is given to the disc.
> Move
sOk
rReturn
eExit
` To edit the disc name, you need to clear disc protection in advance.
M
` Depending on the kind of disc, the displayed screen may be different.
Disc Protection
Disc Protect allows you to protect your discs from being formatted or deleted due to unintended operations.
XCVK
(VR mode) DVD-VR375 only
1. With the unit in Stop mode, press the MEnU button.
Disc Setting
Title List
12:00
ꢀ. Press the ▲▼ buttons to select Disc Setting, then press the OK
Disc Name
: Disc
Disc Protect
: Not Protected
: VR Mode
: Unfinalised
Timer
Edit
button.
Disc Format
Disc Finalise
Disc Information
Erese All Titles
ꢁ. Press the ▲▼ buttons to select Disc Protect, then press the OK
Dubbing
button.
Disc
Setting
ꢂ. Press the ▲▼ button to select Protected, then press the OK
Setup
button.
> Move
sOk
rReturn
eExit
ꢅꢄ_ editing
Download from Www.Somanuals.com. All Manuals Search And Download.
Formatting a Disc
Use these instructions to format a disc.
The Disc Protection should be cleared.
XCK
DVD-VR375 only
<DVD-RAM>
1. With the unit in Stop mode, press the MEnU button.
Disc Format
12:00
ꢀ. Press the ▲▼ buttons to select Disc Setting, then press the OK
Title List
Disc Name
: Disc
button.
ꢁ. Press the ▲▼ buttons to select Disc Format, then press the OK button.
Select the recording format.
DVD+rW
VR Mode
Video Mode
~
You will be prompted with the confirmation message 'All of the
data will be erased (even protected titles). Do you want to
format this disc?'.
Setup
> Move
sOk
rReturn
eExit
DVD-raM/-rW
<DVD-RW>
~
You will be prompted with the confirmation message ‘Select
the recording format.’ (When using a DVD-RAM disc, you can
select VR mode only)
Disc Format
12:00
Title List
Disc Name
: Disc
You will be prompted with the confirmation message 'All of the
data will be erased (even protected titles). Do you want to
format this disc?'.
Select the recording format.
VR Mode
Video Mode
ꢂ. Press the ◄► buttons to select OK, then press the OK button.
Setup
The disc is formatted.
> Move
sOk
rReturn
eExit
` You can change the disc mode only one time when the unused DVD-R disc is inserted.
M
DVD-Vr and DVD-V mode are defined according to their recording format.
DVD-VR mode
DVD-V mode
DVD-RAM
DVD-RW
DVD-R
DISC
DVD-RW
DVD-R
English _ꢅꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
editing
Finalising a Disc
After you record titles onto a DVD-RW/ R disc with your DVD recorder & VCR, it needs to be finalised before
it can be played back on external devices.
CVL
DVD-VR375 only
1. With the unit in Stop mode, press the MEnU button.
Disc Finalise
Title List
12:00
ꢀ. Press the ▲▼ buttons to select Disc Setting, then press the OK
Disc Name
: Disc
button.
Do you want to finalise this disc?
ꢁ. Press the ▲▼ button to select Disc Finalise, then press the OK
button.
Finalise
Unfinalise
You will be prompted with the message ‘Do you want to finalise this
disc?’
Setup
> Move
sOk
rReturn
eExit
ꢂ. Press the ◄ ► buttons to select Finalise, then press the OK
button.
You will be prompted again with the message “Disc will be finalised. Do you want to continue?”
ꢃ. Press the ◄ ► buttons to select OK, then press the OK button.
The disc is finalised.
` Once a disc is finalised, you cannot delete titles from the record list.
M
` Once a DVD R/DVD-RW (video mode)disc is finalised, it is playable in a standard DVD player.
` Depending on the disc type, the displayed screen may be different.
` Finalising time may be different depending on the amount of data recorded on the disc.
` Data on the disc will be damaged if the recorder is powered off during finalise process.
` You can finalise the disc automatically using EZ Record. (see page 38).
Unfinalising a Disc (V/Vr mode)
C
1. With the unit in Stop mode, press the MEnU button.
Disc Finalise
12:00
Title List
Disc Name
: Disc
ꢀ. Press the ▲▼ buttons to select Disc Setting, then press the OK
button.
Do you want to unfinalise this disc?
ꢁ. Press the ▲▼ button to select Disc Finalise, then press the OK
Finalise
button.
Unfinalise
You will be prompted with the message ‘Do you want to
unfinalise disc?’.
Setup
> Move
sOk
rReturn
eExit
ꢂ. Press the ◄ ► buttons to select Unfinalise, then press the OK
button.
You will be prompted again with the message “Disc will be unfinalised. Do you want to continue?”
ꢃ. Press the ◄ ► buttons to select OK, then press the OK button.
The disc is unfinalised.
ꢅꢆ_ editing
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc information
XCVKL
DVD-VR375 only
1. With the unit in Stop mode, press the MEnU button.
Disc Information
12:00
ꢀ. Press the ▲▼ buttons to select Disc Setting, then press the OK button.
Disc Name
Disc
ꢁ. Press the ▲▼ buttons to select Disc information, then press the
OK button.
Media
DVD-RW
Format
VR Mode
Original 1 / Playlist 0
Not Protected
Title No.
Protected
Date
1.03.2008 ~ --.--.----
The Disc Information is displayed.
HQ : 0H58M HSP : 1H27M SP : 1H56M
LSP : 2H25M ESP : 2H54M LP : 3H53M
EP : 5H48M
Remainder
SLP : 7H49M 4.5 / 4.7GB
rReturn
eExit
Erase all Titles
XCVK
(VR mode) DVD-VR375 only
12:00
1. With the unit in Stop mode, press the MEnU button.
Disc Setting
Title List
Disc Name
: Disc
ꢀ. Press the ▲▼ buttons to select Disc Setting, then press the OK
button.
Do you want to erase all the titles?
ꢁ. Press the ▲▼ buttons to select Erase all Titles, then press the
OK button.
OK
Cancel
~
You will be prompted with the confirmation message ‘Do you
want to erase all the titles?’.
When Protected Title exists : The Erase All Titles function will
not operate. If there is a title containing a still picture,
Setup
m Move
sOk
rReturn
eExit
~
however, that function will not operate. If you want to delete a protected title, disable Protect for it on
the Lock item.
ꢂ. Press the ◄ ► buttons to select OK, then press the OK button.
All title lists are deleted.
English _ꢅꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
reference
TrOUBLESHOOTing (DVD)
If your product malfunctions, go through the check points below before contacting a Samsung authorized service
centre.
PROBLEM
EXPLANATION/SOLUTION
No power.
• Check whether the power cord is securely plugged into the power outlet.
• Did you press the /I button of your DVD Recorder & VCR.
The input is displayed for a while when the
power turns on.
The DVD Recorder & VCR requires some time to initialise after it is turned on.
Cannot record TV programmes.
• Check whether the power cord is securely plugged into the power outlet.
• Did you set the DVD Recorder & VCR programme settings correctly?
• Check the free space on your disc.
• Check the antenna cable is connected.
Timer recording does not work properly.
Cannot record.
• Check the recording time, end time and current time settings again.
• Recording will be canceled if the power is interrupted due to a power failure or other
reason during recording.
• Check whether the disc is formatted. This product can record on formatted discs
only.
• Check whether your disc has a sufficient free space.
I pressed the REC button but there is no
response.
If a programme is copy protected, you cannot record it.
I forgot the password for parental lock.
Press the PROG (,/.) buttons on the front panel of your unit for more than 10
seconds with no disc, and then press the STANDBY/ON button.
All settings including password will revert to factory settings.
Do not use it if not absolutely required.
(Note that this function is available only when there is no disc inserted.)
Cannot play the disc.
No sound.
• Check whether the disc is inserted correctly with the label facing up.
• Check the regional code of your DVD disc.
• This DVD Recorder & VCR cannot playback some types of disc.
• Are you watching a programme in slow or skip mode? If you are playing a
programme at a speed other than normal speed, sound is not output. (But, you can
hear sound during forward search (FF1) in DVD-VIDEO/DVD-RAM/ RW/ R)
• Check the connections and initial settings.
• Check whether the disc is damaged. Clean up the disc, if necessary.
• Check whether the disc is inserted correctly with the label facing up.
ꢆ0_ reference
Download from Www.Somanuals.com. All Manuals Search And Download.
TrOUBLESHOOTing (DVD)
PROBLEM
EXPLANATION/SOLUTION
icon appears on
the screen.
You cannot use the operation or function due to one of the following reasons:
(1) Your DVD disc does not support the feature (for example, angles)
(2) You’ve requested a title, chapter, or scan time that is out of the correct range.
Play mode settings are different from the
settings configured with the Setting menu.
The disc does not support all the selected functions.
In this case, some settings you configure on the Setting menu may not work properly.
Cannot change the aspect ratio.
No audio output.
Aspect ratio is fixed for DVD disc.
Check whether you selected correct digital output options in the Audio Output Options menu.
No video or audio output.
Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place?
In this case, do not connect the plug to the power outlet and wait for two hours.
Then insert the disc and try to play again.It will work properly when condensation has
evaporated.
The disc tray is ejected after 2 to 5 seconds.
Angle operation does not work during
playback of a DVD disc.
Angle operation is available only when the disc contains images captured at different angles.
The disc revolves, but no image or bad
quality images are output.
• Check whether there is damage or foreign materials on your disc.
• Some discs with bad manufacturing quality may not be played back.
• If the scene changes from dark to bright suddenly, the screen may jitter temporarily,
but it is not a defect.
Desired audio language and subtitle language Audio languages and subtitle languages are disc-specific.
are not played.
Only the sound and subtitle languages contained on a DVD disc are available and
displayed on the disc menu.
No progressive output.
• Check whether you selected correct Progressive options in the Audio Options.
The remote control doesn’t work.
• Point the remote control at the remote control sensor on your DVD Recorder & VCR.
Operate within distance. (15ft)
Remove obstacles between your DVD Recorder & VCR and remote control.
• Check whether the batteries are depleted.
Other problems
• Read the table of contents and then find and read the sections describing your
problem, and follow the directions given.
• Turn the unit off and on.
• If your problem still persists, contact your nearest Samsung service centre.
No HDMI output.
(DVD-VR375 only)
• Check the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of the DVD Recorder & VCR.
• See if your TV supports this 576p/720p/1080i/1080p DVD Recorder & VCR.
Abnormal HDMI output screen.
(DVD-VR375 only)
• If snow noise appears on the screen, it means that TV does not support HDCP (High-
bandwidth Digital Content Protection).
HDMI output Jitter
(DVD-VR375 only)
• Check your TV system setup correctly.
• Screen Jitter may occur when the frame rate is converted from 50Hz to 60Hz for
720p/1080i/1080p HDMI (High Definition Multimedia Interface) Output.
• Please refer to the user’s manual of your TV.
English _ꢆ1
Download from Www.Somanuals.com. All Manuals Search And Download.
reference
TrOUBLESHOOTing (VCr)
Before contacting a Samsung authorized service centre, perform the following simple checks.
PROBLEM
EXPLANATION/SOLUTION
No power
• Check that the power plug is connected to a wall outlet.
• Have you pressed the /I button?
You cannot insert a video cassette
• A video cassette can only be inserted with the window side up and the safety tab
facing you.
The television programme was not recorded
• Check the DVD Recorder & VCR antenna connections.
• Is the DVD Recorder & VCR tuner properly set?
• Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
• Re-check the recording start/stop time settings and the current time
• Check whether you inserted a tape which has enough time to record
No playback picture or the picture is
distorted
• Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
Noise bars or streaks on playback
• Check the tuner/external setting. It should be on tuner.
• Check the TV antenna connections.
• Press the PROG/TRK (,/.) buttons to minimize this effect.
When the ( ) button is pressed during
playback, the still picture has severe “noise
bar” streaks
• A still picture may have “noise bars”, depending on the condition of the tape.
Press the PROG/TRK (,/.) buttons during slow motion to minimize this effect.
Video Head Cleaning
• If poor pictures appear on a variety of cassettes, the video heads may need cleaning.
This is not a common problem and unless it appears, the heads should not be
cleaned.
When cleaning the video heads, read all instructions provided with the head cleaning
cassette. Incorrect head cleaning can permanently damage the video heads.
if you are unable to solve the problem after reading the above instructions, note:
• The model and serial number on the rear of your DVD recorder & VCr
• The warranty information
• a clear description of the problem
Then contact your nearest SaMSUng authorized service centre.
ꢆꢀ_ reference
Download from Www.Somanuals.com. All Manuals Search And Download.
appendix
SPECiFiCaTiOnS
Power requirements
Power consumption
AC 220 - 240V, 50Hz
27 Watts/1Watts(Standby mode)
4.4Kg
Weight
General
Dimensions
430(W) x 331(D) x 79(H)
Operating temp.
Other conditions
Video input (Rear)
+5°C to +35°C
Keep level when operating. Less than 75% operating humidity
RCA jack : 1.0Vp-p(unbalanced) 75Ω
RCA jack : -8dBm, 47Kohm unbalanced
RCA jack, DV (DVD-VR375 only )
RCA jack, Audio L/R
Input
Audio input (Rear)
Front input
Audio (DVD, VCR)
Audio (DVD only)
Digital audio out COAXIAL
Output
RCA JACK (composite) : 1,0Vp-p, 75Ω
Component out
RCA jack (Composite, RGB)
Video (DVD, VCR)
HDMI output [576p, 720p, 1080i, 1080p] (DVD-VR375 only)
Tape format
VHS type video tape
PAL
Colour system
B/G, D/K : New Zealand model
B/B : Australia model
Tuning system
VCR
Video S/N
Above 43dB (standard recording)
Above 240 lines (standard recording)
Above 60dB (Hi-Fi), 40dB (Mono)
20Hz-20KHz (Hi-Fi)
Resolution
Audio S/N
Audio frequency characteristics
Picture Compression format
Audio Compression format
MPEG-II
Dolby AC-3 256kbps
HQ(Approx. 1 hour), HSP(Approx. 1 hour 30 minutes), SP(Approx. 2
hours), LSP(Approx. 2 hours 30 minutes), ESP(Approx. 3 hours),
LP(Approx. 4 hours), EP(Approx. 6 hours), SLP(Approx. 8 hours)
Recording Quality
DVD
Video S/N
Ratio Min. 50dB at standard recording
Ratio Min. 75dB
Audio S/N
Audio frequency characteristics
20 Hz ~ 20 KHz
audio Output
For DVD discs, audio signals recorded at 96kHz sampling frequency are converted into and output at 48kHz.
Disc Type
Analog Audio Output
DVD
48 / 96KHz
48KHz
AUDIO CD (CD-DA)
44.1KHz
Digital Audio Output
44.1KHz
English _ꢆꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Region
Country
Web Site
Contact Centre ꢀ
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
1-800-SAMSUNG(726-7864)
North America
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG(726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303
01-8000112112
CHILE
NICARAGUA
HONDURAS
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
Latin America
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
BELGIUM
02 201 2418
CZECH REPUBLIC
DENMARK
FINLAND
800-SAMSUNG(800-726786)
8-SAMSUNG(7267864)
30-6227 515
www.samsung.com/fi
FRANCE
01 4863 0000
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
01805 - SAMSUNG(726-7864 € 0,14/Min)
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
02 261 03 710
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
3-SAMSUNG(7267864)
0 801 1SAMSUNG(172678), 022-607-93-33
80820-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
902-1-SAMSUNG (902 172 678)
075-SAMSUNG(726 78 64)
0845 SAMSUNG (7267864)
0818 717 100
Europe
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
EIRE
AUSTRIA
SWITZERLAND
RUSSIA
0810-SAMSUNG(7267864, € 0.07/min)
0848-SAMSUNG(7267864, CHF 0.08/min)
8-800-555-55-55
KAZAKHSTAN
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
UKRAINE
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
CIS
8-800-502-0000
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
8-800-77777
8000-7267
800-7267
1300 362 603
0800 SAMSUNG (0800 726 786)
800-810-5858, 400-810-5858, 010-6475 1880
3698-4698
3030 8282, 1800 110011, 1-800-3000-8282
0800-112-8888
INDONESIA
JAPAN
MALAYSIA
0120-327-527
1800-88-9999
Asia Pacific
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864), 02-5805777
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
TURKEY
1800-SAMSUNG(726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
444 77 11
Middle East &
Africa
SOUTH AFRICA
U.A.E
0860-SAMSUNG(726-7864)
800-SAMSUNG (726-7864), 8000-4726
Download from Www.Somanuals.com. All Manuals Search And Download.
Code no. aK68-01589T(00)
Download from Www.Somanuals.com. All Manuals Search And Download.
|