Q Logic Switch 59047 09 C User Guide

SANbox

Simple Network Management Protocol

Reference Guide

Firmware Version 7.4/7.8/7.10

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Introduction

Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

T e chnical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SNMP Interface Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manager and Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Management Information Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

User Datagram Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Numbering System Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System Specifications and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuring a Switch Using the Command Line Interface . . . . . . . . . . . . . .

Configuring a Switch Using Enterprise Fabric Suite 2007 . . . . . . . . . . . . . .

3-1

3-2

3-6

MIB-II Objects

Groups in MIB-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

sysDescr (1.3.6.1.2.1.1.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

sysObjectID (1.3.6.1.2.1.1.2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

sysUpTime (1.3.6.1.2.1.1.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

sysContact (1.3.6.1.2.1.1.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

sysName (1.3.6.1.2.1.1.5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

sysLocation (1.3.6.1.2.1.1.6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

sysServices (1.3.6.1.2.1.1.7 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The Interfaces Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifNumber (1.3.6.1.2.1.2.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The Interfaces T a ble. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59047-09 C

Page iii

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

ifIndex (1.3.6.1.2.1.2.2.1.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifDescr (1.3.6.1.2.1.2.2.1.2 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifType (1.3.6.1.2.1.2.2.1.3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifMtu (1.3.6.1.2.1.2.2.1.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifSpeed (1.3.6.1.2.1.2.2.1.5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifPhysAddress (1.3.6.1.2.1.2.2.1.6) . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifAdminStatus (1.3.6.1.2.1.2.2.1.7) . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifOperStatus (1.3.6.1.2.1.2.2.1.8) . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifLastChange (1.3.6.1.2.1.2.2.1.9 ). . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifInOctets (1.3.6.1.2.1.2.2.1.10 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifInUcastPkts (1.3.6.1.2.1.2.2.1.11) . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifInNUcastPkts (1.3.6.1.2.1.2.2.1.12). . . . . . . . . . . . . . . . . . . . . . . . . .

ifInDiscards (1.3.6.1.2.1.2.2.1.13) . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifInErrors (1.3.6.1.2.1.2.2.1.14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ifInUnknownProtos (1.3.6.1.2.1.2.2.1.15) . . . . . . . . . . . . . . . . . . . . . . 4-10

ifOutOctets (1.3.6.1.2.1.2.2.1.16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

ifOutUcastPkts (1.3.6.1.2.1.2.2.1.17) . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

ifOutNUcastPkts (1.3.6.1.2.1.2.2.1.18) . . . . . . . . . . . . . . . . . . . . . . . . 4-11

ifOutDiscards (1.3.6.1.2.1.2.2.1.19). . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

ifOutErrors (1.3.6.1.2.1.2.2.1.20). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

ifOutQLen (1.3.6.1.2.1.2.2.1.21) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

ifSpecific (1.3.6.1.2.1.2.2.1.22) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

The Address Translation Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

atIfIndex (1.3.6.1.2.1.3.1.1.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

atPhysAddress (1.3.6.1.2.1.3.1.1.2) . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

atNetAddress (1.3.6.1.2.1.3.1.1.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

The IP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

ipForwarding (1.3.6.1.2.1.4.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

ipDefaultTTL (1.3.6.1.2.1.4.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

ipInReceives (1.3.6.1.2.1.4.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

ipInHdrErrors (1.3.6.1.2.1.4.4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

ipInAddrErrors (1.3.6.1.2.1.4.5 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -15

ipForwDatagrams (1.3.6.1.2.1.4.6) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

ipInUnknownProtos (1.3.6.1.2.1.4.7 ). . . . . . . . . . . . . . . . . . . . . . . . . . 4 -16

ipInDiscards (1.3.6.1.2.1.4.8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

ipInDelivers (1.3.6.1.2.1.4.9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

ipOutRequests (1.3.6.1.2.1.4.10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

ipOutDiscards (1.3.6.1.2.1.4.11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

ipOutNoRoutes (1.3.6.1.2.1.4.12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Page iv

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

ipReasmTimeout (1.3.6.1.2.1.4.13 ). . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -18

ipReasmReqds (1.3.6.1.2.1.4.14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

ipReasmOKs (1.3.6.1.2.1.4.15 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -19

ipReasmFails (1.3.6.1.2.1.4.16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

ipFragOKs (1.3.6.1.2.1.4.17 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -19

ipFragFails (1.3.6.1.2.1.4.18) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

ipFragCreates (1.3.6.1.2.1.4.19) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

The IP Address T a bl e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -20

ipAdEntAddr (1.3.6.1.2.1.4.20.1.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

ipAdEntIfIndex (1.3.6.1.2.1.4.20.1.2). . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

ipAdEntNetMask (1.3.6.1.2.1.4.20.1.3) . . . . . . . . . . . . . . . . . . . . . . . . 4-21

ipAdEntBcastAddr (1.3.6.1.2.1.4.20.1.4 ). . . . . . . . . . . . . . . . . . . . . . . 4 -21

ipAdEntReasmMaxSize (1.3.6.1.2.1.4.20.1.5) . . . . . . . . . . . . . . . . . . 4-22

The IP Routing T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

ipRouteDest (1.3.6.1.2.1.4.21.1.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

ipRouteIfIndex (1.3.6.1.2.1.4.21.1.2 ). . . . . . . . . . . . . . . . . . . . . . . . . . 4 -22

ipRouteMetric1 (1.3.6.1.2.1.4.21.1.3) . . . . . . . . . . . . . . . . . . . . . . . . . 4-23

ipRouteMetric2 (1.3.6.1.2.1.4.21.1.4) . . . . . . . . . . . . . . . . . . . . . . . . . 4-23

ipRouteMetric3 (1.3.6.1.2.1.4.21.1.5) . . . . . . . . . . . . . . . . . . . . . . . . . 4-24

ipRouteMetric4 (1.3.6.1.2.1.4.21.1.6) . . . . . . . . . . . . . . . . . . . . . . . . . 4-24

ipRouteNextHop (1.3.6.1.2.1.4.21.1.7) . . . . . . . . . . . . . . . . . . . . . . . . 4-24

ipRouteType (1.3.6.1.2.1.4.21.1.8) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

ipRouteProto (1.3.6.1.2.1.4.21.1.9) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

ipRouteAge (1.3.6.1.2.1.4.21.1.10) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

ipRouteMask (1.3.6.1.2.1.4.21.1.11) . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

ipRouteMetric5 (1.3.6.1.2.1.4.21.1.12) . . . . . . . . . . . . . . . . . . . . . . . . 4-26

ipRouteInfo (1.3.6.1.2.1.4.21.1.13) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

The IP Address Translation T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

ipNet T o MediaIfIndex (1.3.6.1.2.1.4.22.1.1) . . . . . . . . . . . . . . . . . . . . . 4-27

ipNet T o MediaPhysAddress (1.3.6.1.2.1.4.22.1.2 ). . . . . . . . . . . . . . . . 4 -28

ipNet T o MediaNetAddress (1.3.6.1.2.1.4.22.1.3) . . . . . . . . . . . . . . . . . 4-28

ipNet T o MediaType (1.3.6.1.2.1.4.22.1.4) . . . . . . . . . . . . . . . . . . . . . . 4-29

Additional IP Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29

ipRoutingDiscards (1.3.6.1.2.1.4.23 ). . . . . . . . . . . . . . . . . . . . . . . . . . 4 -29

The ICMP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30

icmpInMsgs (1.3.6.1.2.1.5.1 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -30

icmpInErrors (1.3.6.1.2.1.5.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30

icmpInDestUnreachs (1.3.6.1.2.1.5.3). . . . . . . . . . . . . . . . . . . . . . . . . 4-30

icmpInTimeExcds (1.3.6.1.2.1.5.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31

59047-09 C

Page v

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

icmpInParmProbs (1.3.6.1.2.1.5.5) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31

icmpInSrcQuenchs (1.3.6.1.2.1.5.6) . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31

icmpInRedirects (1.3.6.1.2.1.5.7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31

icmpInEchos (1.3.6.1.2.1.5.8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

icmpInEchoReps (1.3.6.1.2.1.5.9 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -32

icmpInTimestamps (1.3.6.1.2.1.5.10) . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

icmpInTimestampReps (1.3.6.1.2.1.5.11) . . . . . . . . . . . . . . . . . . . . . . 4-33

icmpInAddrMasks (1.3.6.1.2.1.5.12) . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33

icmpInAddrMaskReps (1.3.6.1.2.1.5.13 ). . . . . . . . . . . . . . . . . . . . . . . 4 -33

icmpOutMsgs (1.3.6.1.2.1.5.14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33

icmpOutErrors (1.3.6.1.2.1.5.15 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -34

icmpOutDestUnreachs (1.3.6.1.2.1.5.16) . . . . . . . . . . . . . . . . . . . . . . 4-34

icmpOutTimeExcds (1.3.6.1.2.1.5.17 ). . . . . . . . . . . . . . . . . . . . . . . . . 4 -34

icmpOutParmProbs (1.3.6.1.2.1.5.18). . . . . . . . . . . . . . . . . . . . . . . . . 4-35

icmpOutSrcQuenchs (1.3.6.1.2.1.5.19 ). . . . . . . . . . . . . . . . . . . . . . . . 4 -35

icmpOutRedirects (1.3.6.1.2.1.5.20) . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35

icmpOutEchos (1.3.6.1.2.1.5.21). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35

icmpOutEchoReps (1.3.6.1.2.1.5.22) . . . . . . . . . . . . . . . . . . . . . . . . . 4-36

icmpOutTimestamps (1.3.6.1.2.1.5.23) . . . . . . . . . . . . . . . . . . . . . . . . 4-36

icmpOutTimestampReps (1.3.6.1.2.1.5.24). . . . . . . . . . . . . . . . . . . . . 4-36

icmpOutAddrMasks (1.3.6.1.2.1.5.25). . . . . . . . . . . . . . . . . . . . . . . . . 4-37

icmpOutAddrMaskReps (1.3.6.1.2.1.5.26) . . . . . . . . . . . . . . . . . . . . . 4-37

The TCP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37

tcpRtoAlgorithm (1.3.6.1.2.1.6.1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37

tcpRtoMin (1.3.6.1.2.1.6.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38

tcpRtoMax (1.3.6.1.2.1.6.3 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -38

tcpMaxConn (1.3.6.1.2.1.6.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38

tcpActiveOpens (1.3.6.1.2.1.6.5 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -39

tcpPassiveOpens (1.3.6.1.2.1.6.6) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39

tcpAttemptFails (1.3.6.1.2.1.6.7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39

tcpEstabResets (1.3.6.1.2.1.6.8 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -40

tcpCurrEstab (1.3.6.1.2.1.6.9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40

tcpInSegs (1.3.6.1.2.1.6.10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40

tcpOutSegs (1.3.6.1.2.1.6.11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41

tcpRetransSegs (1.3.6.1.2.1.6.12). . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41

The TCP Connection T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41

tcpConnState (1.3.6.1.2.1.6.13.1.1). . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41

tcpConnLocalAddress (1.3.6.1.2.1.6.13.1.2 ). . . . . . . . . . . . . . . . . . . . 4 -42

tcpConnLocalPort (1.3.6.1.2.1.6.13.1.3) . . . . . . . . . . . . . . . . . . . . . . . 4-42

Page vi

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

tcpConnRemAddress (1.3.6.1.2.1.6.13.1.4) . . . . . . . . . . . . . . . . . . . . 4-42

tcpConnRemPort (1.3.6.1.2.1.6.13.1.5). . . . . . . . . . . . . . . . . . . . . . . . 4-43

Additional TCP Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43

tcpInErrs (1.3.6.1.2.1.6.14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43

tcpOutRsts (1.3.6.1.2.1.6.15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43

The UDP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44

udpInDatagrams (1.3.6.1.2.1.7.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44

udpNoPorts (1.3.6.1.2.1.7.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44

udpInErrors (1.3.6.1.2.1.7.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44

udpOutDatagrams (1.3.6.1.2.1.7.4 ). . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -45

The UDP Listener T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-45

udpLocalAddress (1.3.6.1.2.1.7.5.1.1) . . . . . . . . . . . . . . . . . . . . . . . . 4-45

udpLocalPort (1.3.6.1.2.1.7.5.1.2 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -45

The EGP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46

egpInMsgs (1.3.6.1.2.1.8.1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46

egpInErrors (1.3.6.1.2.1.8.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46

egpOutMsgs (1.3.6.1.2.1.8.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46

egpOutErrors (1.3.6.1.2.1.8.4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47

The EGP Neighbor T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47

egpNeighState (1.3.6.1.2.1.8.5.1.1). . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47

egpNeighAddr (1.3.6.1.2.1.8.5.1.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47

egpNeighAs (1.3.6.1.2.1.8.5.1.3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-48

egpNeighInMsgs (1.3.6.1.2.1.8.5.1.4) . . . . . . . . . . . . . . . . . . . . . . . . . 4-48

egpNeighInErrs (1.3.6.1.2.1.8.5.1.5) . . . . . . . . . . . . . . . . . . . . . . . . . . 4-48

egpNeighOutMsgs (1.3.6.1.2.1.8.5.1.6) . . . . . . . . . . . . . . . . . . . . . . . 4-48

egpNeighOutErrs (1.3.6.1.2.1.8.5.1.7) . . . . . . . . . . . . . . . . . . . . . . . . 4-49

egpNeighInErrMsgs (1.3.6.1.2.1.8.5.1.8) . . . . . . . . . . . . . . . . . . . . . . 4-49

egpNeighOutErrMsgs (1.3.6.1.2.1.8.5.1.9) . . . . . . . . . . . . . . . . . . . . . 4-49

egpNeighStateUps (1.3.6.1.2.1.8.5.1.10) . . . . . . . . . . . . . . . . . . . . . . 4-50

egpNeighStateDowns (1.3.6.1.2.1.8.5.1.11) . . . . . . . . . . . . . . . . . . . . 4-50

egpNeighIntervalHello (1.3.6.1.2.1.8.5.1.12). . . . . . . . . . . . . . . . . . . . 4-50

egpNeighIntervalPoll (1.3.6.1.2.1.8.5.1.13 ). . . . . . . . . . . . . . . . . . . . . 4 -50

egpNeighMode (1.3.6.1.2.1.8.5.1.14) . . . . . . . . . . . . . . . . . . . . . . . . . 4-51

egpNeighEventTrigger (1.3.6.1.2.1.8.5.1.15) . . . . . . . . . . . . . . . . . . . 4-51

egpAs (1.3.6.1.2.1.8.6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52

The Transmission Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52

The SNMP Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52

snmpInPkts (1.3.6.1.2.1.11.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52

snmpOutPkts (1.3.6.1.2.1.11.2 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -53

59047-09 C

Page vii

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

snmpInBadVersions (1.3.6.1.2.1.11.3) . . . . . . . . . . . . . . . . . . . . . . . . 4-53

snmpInBadCommunityNames (1.3.6.1.2.1.11.4). . . . . . . . . . . . . . . . . 4-53

snmpInBadCommunityUses (1.3.6.1.2.1.11.5) . . . . . . . . . . . . . . . . . . 4-54

snmpInASNParseErrs (1.3.6.1.2.1.11.6) . . . . . . . . . . . . . . . . . . . . . . . 4-54

snmpIn T o oBigs (1.3.6.1.2.1.11.8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-54

snmpInNoSuchNames (1.3.6.1.2.1.11.9) . . . . . . . . . . . . . . . . . . . . . . 4-55

snmpInBadValues (1.3.6.1.2.1.11.10) . . . . . . . . . . . . . . . . . . . . . . . . . 4-55

snmpInReadOnlys (1.3.6.1.2.1.11.11 ). . . . . . . . . . . . . . . . . . . . . . . . . 4 -55

snmpInGenErrs (1.3.6.1.2.1.11.12) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-56

snmpIn T o talReqVars (1.3.6.1.2.1.11.13) . . . . . . . . . . . . . . . . . . . . . . . 4-56

snmpIn T o talSetVars (1.3.6.1.2.1.11.14). . . . . . . . . . . . . . . . . . . . . . . . 4-56

snmpInGetRequests (1.3.6.1.2.1.11.15) . . . . . . . . . . . . . . . . . . . . . . . 4-56

snmpInGetNexts (1.3.6.1.2.1.11.16) . . . . . . . . . . . . . . . . . . . . . . . . . . 4-57

snmpInSetRequests (1.3.6.1.2.1.11.17) . . . . . . . . . . . . . . . . . . . . . . . 4-57

snmpInGetResponses (1.3.6.1.2.1.11.18). . . . . . . . . . . . . . . . . . . . . . 4-57

snmpInTraps (1.3.6.1.2.1.11.19) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-58

snmpOut T o oBigs (1.3.6.1.2.1.11.20 ). . . . . . . . . . . . . . . . . . . . . . . . . . 4 -58

snmpOutNoSuchNames (1.3.6.1.2.1.11.21) . . . . . . . . . . . . . . . . . . . . 4-58

snmpOutBadValues (1.3.6.1.2.1.11.22). . . . . . . . . . . . . . . . . . . . . . . . 4-59

snmpOutGenErrs (1.3.6.1.2.1.11.24) . . . . . . . . . . . . . . . . . . . . . . . . . 4-59

snmpOutGetRequests (1.3.6.1.2.1.11.25 ). . . . . . . . . . . . . . . . . . . . . . 4 -59

snmpOutGetNexts (1.3.6.1.2.1.11.26 ). . . . . . . . . . . . . . . . . . . . . . . . . 4 -60

snmpOutSetRequests (1.3.6.1.2.1.11.27) . . . . . . . . . . . . . . . . . . . . . . 4-60

snmpOutGetResponses (1.3.6.1.2.1.11.28) . . . . . . . . . . . . . . . . . . . . 4-60

snmpOutTraps (1.3.6.1.2.1.11.29). . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-60

snmpEnableAuthenTraps (1.3.6.1.2.1.11.30) . . . . . . . . . . . . . . . . . . . 4-61

Fibre Alliance MIB Objects

FA MIB Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

revisionNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connectivity Unit Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

uNumber (1.3.6.1.3.94.1.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

systemURL (1.3.6.1.3.94.1.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

statusChangeTime (1.3.6.1.3.94.1.3) . . . . . . . . . . . . . . . . . . . . . . . . .

configurationChangeTime (1.3.6.1.3.94.1.4 ). . . . . . . . . . . . . . . . . . . .

connUnit T a bleChangeTime (1.3.6.1.3.94.1.5 ). . . . . . . . . . . . . . . . . . .

Connectivity T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

connUnitId (1.3.6.1.3.94.1.6.1.1 ). . . . . . . . . . . . . . . . . . . . . . . . . . . . .

connUnitGlobalId (1.3.6.1.3.94.1.6.1.2). . . . . . . . . . . . . . . . . . . . . . . .

connUnitType (1.3.6.1.3.94.1.6.1.3) . . . . . . . . . . . . . . . . . . . . . . . . . .

Page viii

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

connUnitNumports (1.3.6.1.3.94.1.6.1.4) . . . . . . . . . . . . . . . . . . . . . .

connUnitState (1.3.6.1.3.94.1.6.1.5) . . . . . . . . . . . . . . . . . . . . . . . . . .

connUnitStatus (1.3.6.1.3.94.1.6.1.6) . . . . . . . . . . . . . . . . . . . . . . . . .

connUnitProduct (1.3.6.1.3.94.1.6.1.7) . . . . . . . . . . . . . . . . . . . . . . . .

connUnitSn (1.3.6.1.3.94.1.6.1.8) . . . . . . . . . . . . . . . . . . . . . . . . . . . .

connUnitUpTime (1.3.6.1.3.94.1.6.1.9) . . . . . . . . . . . . . . . . . . . . . . . .

5-6

5-7

5-9

connUnitUrl (1.3.6.1.3.94.1.6.1.10) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

connUnitDomainId (1.3.6.1.3.94.1.6.1.11 . . . . . . . . . . . . . . . . . . . . . . 5-10

connUnitProxyMaster (1.3.6.1.3.94.1.6.1.12) . . . . . . . . . . . . . . . . . . . 5-11

connUnitPrincipal (1.3.6.1.3.94.1.6.1.13) . . . . . . . . . . . . . . . . . . . . . . 5-12

connUnitNumSensors (1.3.6.1.3.94.1.6.1.14) . . . . . . . . . . . . . . . . . . . 5-12

connUnitStatusChangeTime (1.3.6.1.3.94.1.6.1.15) . . . . . . . . . . . . . . 5-13

connUnitConfigurationChangeTime (1.3.6.1.3.94.1.6.1.16) . . . . . . . . 5-13

connUnitNumRevs (1.3.6.1.3.94.1.6.1.17) . . . . . . . . . . . . . . . . . . . . . 5-14

connUnitNumZones (1.3.6.1.3.94.1.6.1.18) . . . . . . . . . . . . . . . . . . . . 5-14

connUnitModuleId (1.3.6.1.3.94.1.6.1.19) . . . . . . . . . . . . . . . . . . . . . . 5-15

connUnitName (1.3.6.1.3.94.1.6.1.20) . . . . . . . . . . . . . . . . . . . . . . . . 5-15

connUnitInfo (1.3.6.1.3.94.1.6.1.21) . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

connUnitControl (1.3.6.1.3.94.1.6.1.22) . . . . . . . . . . . . . . . . . . . . . . . 5-16

connUnitContact (1.3.6.1.3.94.1.6.1.23) . . . . . . . . . . . . . . . . . . . . . . . 5-17

connUnitLocation (1.3.6.1.3.94.1.6.1.24) . . . . . . . . . . . . . . . . . . . . . . 5-18

connUnitEventFilter (1.3.6.1.3.94.1.6.1.25). . . . . . . . . . . . . . . . . . . . . 5-18

connUnitNumEvents (1.3.6.1.3.94.1.6.1.26) . . . . . . . . . . . . . . . . . . . . 5-19

connUnitMaxEvents (1.3.6.1.3.94.1.6.1.27) . . . . . . . . . . . . . . . . . . . . 5-20

connUnitEventCurrID (1.3.6.1.3.94.1.6.1.28) . . . . . . . . . . . . . . . . . . . 5-20

connUnitFabricID (1.3.6.1.3.94.1.6.1.29) . . . . . . . . . . . . . . . . . . . . . . 5-20

connUnitNumLinks (1.3.6.1.3.94.1.6.1.30) . . . . . . . . . . . . . . . . . . . . . 5-21

connUnitVendorId (1.3.6.1.3.94.1.6.1.31) . . . . . . . . . . . . . . . . . . . . . . 5-21

Revision T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21

connUnitRevsUnitId (1.3.6.1.3.94.1.7.1.1) . . . . . . . . . . . . . . . . . . . . . 5-22

connUnitRevsIndex (1.3.6.1.3.94.1.7.1.2 ). . . . . . . . . . . . . . . . . . . . . . 5 -22

connUnitRevsRevId (1.3.6.1.3.94.1.7.1.3) . . . . . . . . . . . . . . . . . . . . . 5-22

connUnitRevsDescription (1.3.6.1.3.94.1.7.1.4) . . . . . . . . . . . . . . . . . 5-23

Sensor T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24

connUnitSensorUnitId (1.3.6.1.3.94.1.8.1.1) . . . . . . . . . . . . . . . . . . . . 5-24

connUnitSensorIndex (1.3.6.1.3.94.1.8.1.2) . . . . . . . . . . . . . . . . . . . . 5-24

connUnitSensorName (1.3.6.1.3.94.1.8.1.3 ). . . . . . . . . . . . . . . . . . . . 5 -25

connUnitSensorStatus (1.3.6.1.3.94.1.8.1.4). . . . . . . . . . . . . . . . . . . . 5-26

connUnitSensorInfo (1.3.6.1.3.94.1.8.1.5). . . . . . . . . . . . . . . . . . . . . . 5-27

59047-09 C

Page ix

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

connUnitSensorMessage (1.3.6.1.3.94.1.8.1.6) . . . . . . . . . . . . . . . . . 5-28

connUnitSensorType (1.3.6.1.3.94.1.8.1.7). . . . . . . . . . . . . . . . . . . . . 5-29

connUnitSensorCharacteristic (1.3.6.1.3.94.1.8.1.8). . . . . . . . . . . . . . 5-30

Port T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31

connUnitPortUnitId (1.3.6.1.3.94.1.10.1.1) . . . . . . . . . . . . . . . . . . . . . 5-31

connUnitPortIndex (1.3.6.1.3.94.1.10.1.2). . . . . . . . . . . . . . . . . . . . . . 5-31

connUnitPortType (1.3.6.1.3.94.1.10.1.3) . . . . . . . . . . . . . . . . . . . . . . 5-32

connUnitPortFCClassCap (1.3.6.1.3.94.1.10.1.4 ). . . . . . . . . . . . . . . . 5 -33

connUnitPortFCClassOp (1.3.6.1.3.94.1.10.1.5). . . . . . . . . . . . . . . . . 5-34

connUnitPortState (1.3.6.1.3.94.1.10.1.6) . . . . . . . . . . . . . . . . . . . . . . 5-34

connUnitPortStatus (1.3.6.1.3.94.1.10.1.7) . . . . . . . . . . . . . . . . . . . . . 5-35

connUnitPortTransmitterType (1.3.6.1.3.94.1.10.1.8) . . . . . . . . . . . . . 5-35

connUnitPortModuleType (1.3.6.1.3.94.1.10.1.9) . . . . . . . . . . . . . . . . 5-36

connUnitPortWwn (1.3.6.1.3.94.1.10.1.10) . . . . . . . . . . . . . . . . . . . . . 5-37

connUnitPortFCId (1.3.6.1.3.94.1.10.1.11) . . . . . . . . . . . . . . . . . . . . . 5-38

connUnitPortSn (1.3.6.1.3.94.1.10.1.12 ). . . . . . . . . . . . . . . . . . . . . . . 5 -38

connUnitPortRevision (1.3.6.1.3.94.1.10.1.13) . . . . . . . . . . . . . . . . . . 5-38

connUnitPortVendor (1.3.6.1.3.94.1.10.1.14) . . . . . . . . . . . . . . . . . . . 5-39

connUnitPortSpeed (1.3.6.1.3.94.1.10.1.15) . . . . . . . . . . . . . . . . . . . . 5-39

connUnitPortControl (1.3.6.1.3.94.1.10.1.16) . . . . . . . . . . . . . . . . . . . 5-40

connUnitPortName (1.3.6.1.3.94.1.10.1.17) . . . . . . . . . . . . . . . . . . . . 5-41

connUnitPortPhysicalNumber (1.3.6.1.3.94.1.10.1.18) . . . . . . . . . . . . 5-42

connUnitPortStatObject (1.3.6.1.3.94.1.10.1.19). . . . . . . . . . . . . . . . . 5-42

connUnitPortProtocolCap (1.3.6.1.3.94.1.10.1.20) . . . . . . . . . . . . . . . 5-43

connUnitPortProtocolOp (1.3.6.1.3.94.1.10.1.21) . . . . . . . . . . . . . . . . 5-43

connUnitPortNodeWwn (1.3.6.1.3.94.1.10.1.22). . . . . . . . . . . . . . . . . 5-44

connUnitPortHWState (1.3.6.1.3.94.1.10.1.23) . . . . . . . . . . . . . . . . . . 5-44

Event T a ble. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-45

connUnitEventUnitId (1.3.6.1.3.94.1.11.1.1) . . . . . . . . . . . . . . . . . . . . 5-45

connUnitEventIndex (1.3.6.1.3.94.1.11.1.2) . . . . . . . . . . . . . . . . . . . . 5-46

connUnitEventId (1.3.6.1.3.94.1.11.1.3) . . . . . . . . . . . . . . . . . . . . . . . 5-47

connUnitREventTime (1.3.6.1.3.94.1.11.1.4). . . . . . . . . . . . . . . . . . . . 5-47

connUnitSEventTime (1.3.6.1.3.94.1.11.1.5). . . . . . . . . . . . . . . . . . . . 5-48

connUnitEventSeverity (1.3.6.1.3.94.1.11.1.6) . . . . . . . . . . . . . . . . . . 5-48

connUnitEventType (1.3.6.1.3.94.1.11.1.7) . . . . . . . . . . . . . . . . . . . . . 5-48

connUnitEventObject (1.3.6.1.3.94.1.11.1.8). . . . . . . . . . . . . . . . . . . . 5-49

connUnitEventDescr (1.3.6.1.3.94.1.11.1.9) . . . . . . . . . . . . . . . . . . . . 5-49

Link T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-50

connUnitLinkUnitId (1.3.6.1.3.94.1.12.1.1) . . . . . . . . . . . . . . . . . . . . . 5-50

Page x

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

connUnitLinkIndex (1.3.6.1.3.94.1.12.1.2). . . . . . . . . . . . . . . . . . . . . . 5-51

connUnitLinkNodeIdX (1.3.6.1.3.94.1.12.1.3) . . . . . . . . . . . . . . . . . . . 5-51

connUnitLinkPortNumberX (1.3.6.1.3.94.1.12.1.4) . . . . . . . . . . . . . . . 5-51

connUnitLinkPortWwnX (1.3.6.1.3.94.1.12.1.5) . . . . . . . . . . . . . . . . . 5-52

connUnitLinkNodeIdY (1.3.6.1.3.94.1.12.1.6) . . . . . . . . . . . . . . . . . . . 5-52

connUnitLinkPortNumberY (1.3.6.1.3.94.1.12.1.7) . . . . . . . . . . . . . . . 5-53

connUnitLinkPortWwnY (1.3.6.1.3.94.1.12.1.8) . . . . . . . . . . . . . . . . . 5-53

connUnitLinkAgentAddressY (1.3.6.1.3.94.1.12.1.9) . . . . . . . . . . . . . 5-53

connUnitLinkAgentAddressTypeY (1.3.6.1.3.94.1.12.1.10). . . . . . . . . 5-54

connUnitLinkAgentPortY (1.3.6.1.3.94.1.12.1.11) . . . . . . . . . . . . . . . . 5-54

connUnitLinkUnitTypeY (1.3.6.1.3.94.1.12.1.12). . . . . . . . . . . . . . . . . 5-55

connUnitLinkConnIdY (1.3.6.1.3.94.1.12.1.13. . . . . . . . . . . . . . . . . . . 5-55

connUnitLinkCurrIndex (1.3.6.1.3.94.1.12.1.14) . . . . . . . . . . . . . . . . . 5-55

Zone T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-56

connUnitZoneIndex (1.3.6.1.3.94.1.13.1.1 ). . . . . . . . . . . . . . . . . . . . . 5 -56

connUnitZoneMemberIndex (1.3.6.1.3.94.1.13.1.2) . . . . . . . . . . . . . . 5-56

connUnitZoneSetName (1.3.6.1.3.94.1.13.1.3). . . . . . . . . . . . . . . . . . 5-57

connUnitZoneSetNumZones (1.3.6.1.3.94.1.13.1.4). . . . . . . . . . . . . . 5-57

connUnitZoneName (1.3.6.1.3.94.1.13.1.5) . . . . . . . . . . . . . . . . . . . . 5-57

connUnitZoneCapabilities (1.3.6.1.3.94.1.13.1.6) . . . . . . . . . . . . . . . . 5-58

connUnitZoneEnforcementState (1.3.6.1.3.94.1.13.1.7) . . . . . . . . . . . 5-58

connUnitZoneAttributeBlock (1.3.6.1.3.94.1.13.1.8) . . . . . . . . . . . . . . 5-59

connUnitZoneNumMembers (1.3.6.1.3.94.1.13.1.9) . . . . . . . . . . . . . . 5-59

connUnitZoneMemberIdType (1.3.6.1.3.94.1.13.1.10) . . . . . . . . . . . . 5-60

connUnitZoneMemberID (1.3.6.1.3.94.1.13.1.11) . . . . . . . . . . . . . . . . 5-60

Zoning Alias T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-61

connUnitZoningAliasIndex (1.3.6.1.3.94.1.14.1.1) . . . . . . . . . . . . . . . 5-61

connUnitZoningAliasMemberIndex (1.3.6.1.3.94.1.14.1.2) . . . . . . . . . 5-61

connUnitZoningAliasNumAliases (1.3.6.1.3.94.1.14.1.3) . . . . . . . . . . 5-62

connUnitZoningAliasName (1.3.6.1.3.94.1.14.1.4) . . . . . . . . . . . . . . . 5-62

connUnitZoningAliasNumMembers (1.3.6.1.3.94.1.14.1.5). . . . . . . . . 5-62

connUnitZoningAliasMemberIdType (1.3.6.1.3.94.1.14.1.6) . . . . . . . . 5-63

connUnitZoningAliasMemberID (1.3.6.1.3.94.1.14.1.7) . . . . . . . . . . . 5-63

Port Statistics T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-64

connUnitPortStatUnitId (1.3.6.1.3.94.4.5.1.1) . . . . . . . . . . . . . . . . . . . 5-64

connUnitPortStatIndex (1.3.6.1.3.94.4.5.1.2) . . . . . . . . . . . . . . . . . . . 5-65

connUnitPortStatCountError (1.3.6.1.3.94.4.5.1.3) . . . . . . . . . . . . . . . 5-65

connUnitPortStatCountTxObjects (1.3.6.1.3.94.4.5.1.4) . . . . . . . . . . . 5-65

connUnitPortStatCountRxObjects (1.3.6.1.3.94.4.5.1.5 ). . . . . . . . . . . 5 -66

59047-09 C

Page xi

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

connUnitPortStatCountTxElements (1.3.6.1.3.94.4.5.1.6). . . . . . . . . . 5-66

connUnitPortStatCountRxElements (1.3.6.1.3.94.4.5.1.7) . . . . . . . . . 5-67

connUnitPortStatCountBBCreditZero (1.3.6.1.3.94.4.5.1.8) . . . . . . . . 5-67

connUnitPortStatCountInputBuffersFull (1.3.6.1.3.94.4.5.1.9) . . . . . . 5-67

connUnitPortStatCountFBSYFrames (1.3.6.1.3.94.4.5.1.10) . . . . . . . 5-68

connUnitPortStatCountPBSYFrames (1.3.6.1.3.94.4.5.1.11) . . . . . . . 5-68

connUnitPortStatCountFRJTFrames (1.3.6.1.3.94.4.5.1.12). . . . . . . . 5-69

connUnitPortStatCountPRJTFrames (1.3.6.1.3.94.4.5.1.13) . . . . . . . 5-69

connUnitPortStatCountClass1RxFrames (1.3.6.1.3.94.4.5.1.14) . . . . 5-70

connUnitPortStatCountClass1TxFrames (1.3.6.1.3.94.4.5.1.15). . . . . 5-70

connUnitPortStatCountClass1FBSYFrames (1.3.6.1.3.94.4.5.1.16 . . 5-70

connUnitPortStatCountClass1PBSYFrames (1.3.6.1.3.94.4.5.1.17). . 5-71

connUnitPortStatCountClass1FRJTFrames (1.3.6.1.3.94.4.5.1.18. . . 5-71

connUnitPortStatCountClass1PRJTFrames (1.3.6.1.3.94.4.5.1.19) . . 5-72

connUnitPortStatCountClass2RxFrames (1.3.6.1.3.94.4.5.1.20) . . . . 5-72

connUnitPortStatCountClass2TxFrames (1.3.6.1.3.94.4.5.1.21) . . . . 5-72

connUnitPortStatCountClass2FBSYFrames (1.3.6.1.3.94.4.5.1.22 ). . 5 -73

connUnitPortStatCountClass2PBSYFrames (1.3.6.1.3.94.4.5.1.23). . 5-73

connUnitPortStatCountClass2FRJTFrames (1.3.6.1.3.94.4.5.1.24) . . 5-74

connUnitPortStatCountClass2PRJTFrames (1.3.6.1.3.94.4.5.1.25) . . 5-74

connUnitPortStatCountClass3RxFrames (1.3.6.1.3.94.4.5.1.26) . . . . 5-74

connUnitPortStatCountClass3TxFrames (1.3.6.1.3.94.4.5.1.27) . . . . 5-75

connUnitPortStatCountClass3Discards (1.3.6.1.3.94.4.5.1.28). . . . . . 5-75

connUnitPortStatCountRxMulticastObjects (1.3.6.1.3.94.4.5.1.29 ). . . 5 -76

connUnitPortStatCountTxMulticastObjects (1.3.6.1.3.94.4.5.1.30) . . . 5-76

connUnitPortStatCountRxBroadcastObjects (1.3.6.1.3.94.4.5.1.31). . 5-76

connUnitPortStatCountTxBroadcastObjects (1.3.6.1.3.94.4.5.1.32) . . 5-77

connUnitPortStatCountRxLinkResets (1.3.6.1.3.94.4.5.1.33) . . . . . . . 5-77

connUnitPortStatCountTxLinkResets (1.3.6.1.3.94.4.5.1.34) . . . . . . . 5-77

connUnitPortStatCountNumberLinkResets (1.3.6.1.3.94.4.5.1.35 ). . . 5 -78

connUnitPortStatCountRxOfflineSequences (1.3.6.1.3.94.4.5.1.36). . 5-78

connUnitPortStatCountTxOfflineSequences (1.3.6.1.3.94.4.5.1.37) . . 5-79

connUnitPortStatCountNumberOfflineSequences (1.3.6.1.3.94.4.5.1.38)

5-79

connUnitPortStatCountLinkFailures (1.3.6.1.3.94.4.5.1.39) . . . . . . . . 5-79

connUnitPortStatCountInvalidCRC (1.3.6.1.3.94.4.5.1.40) . . . . . . . . . 5-80

connUnitPortStatCountInvalidTxWords (1.3.6.1.3.94.4.5.1.41 ). . . . . . 5 -80

connUnitPortStatCountPrimitiveSequenceProtocolErrors

(1.3.6.1.3.94.4.5.1.42) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-81

connUnitPortStatCountLossofSignal (1.3.6.1.3.94.4.5.1.43 ). . . . . . . . 5 -81

Page xii

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

connUnitPortStatCountLossofSynchronization (1.3.6.1.3.94.4.5.1.44) 5-81

connUnitPortStatCountInvalidOrderedSets (1.3.6.1.3.94.4.5.1.45). . . 5-82

connUnitPortStatCountFrames T o oLong (1.3.6.1.3.94.4.5.1.46) . . . . . 5-82

connUnitPortStatCountFramesTruncated (1.3.6.1.3.94.4.5.1.47) . . . . 5-83

connUnitPortStatCountAddressErrors (1.3.6.1.3.94.4.5.1.48). . . . . . . 5-83

connUnitPortStatCountDelimiterErrors (1.3.6.1.3.94.4.5.1.49) . . . . . . 5-83

connUnitPortStatCountEncodingDisparityErrors (1.3.6.1.3.94.4.5.1.50) 5-84

Simple Name Server T a ble. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-84

connUnitSnsMaxEntry (1.3.6.1.3.94.5.1.1) . . . . . . . . . . . . . . . . . . . . . 5-85

connUnitSnsId (1.3.6.1.3.94.5.2.1.1.1) . . . . . . . . . . . . . . . . . . . . . . . . 5-85

connUnitSnsPortIndex (1.3.6.1.3.94.5.2.1.1.2) . . . . . . . . . . . . . . . . . . 5-85

connUnitSnsPortIdentifier (1.3.6.1.3.94.5.2.1.1.3) . . . . . . . . . . . . . . . 5-86

connUnitSnsPortName (1.3.6.1.3.94.5.2.1.1.4). . . . . . . . . . . . . . . . . . 5-86

connUnitSnsNodeName (1.3.6.1.3.94.5.2.1.1.5). . . . . . . . . . . . . . . . . 5-86

connUnitSnsClassOfSvc (1.3.6.1.3.94.5.2.1.1.6) . . . . . . . . . . . . . . . . 5-87

connUnitSnsNodeIPAddress (1.3.6.1.3.94.5.2.1.1.7) . . . . . . . . . . . . . 5-87

connUnitSnsProcAssoc (1.3.6.1.3.94.5.2.1.1.8) . . . . . . . . . . . . . . . . . 5-88

connUnitSnsFC4Type (1.3.6.1.3.94.5.2.1.1.9) . . . . . . . . . . . . . . . . . . 5-88

connUnitSnsPortType (1.3.6.1.3.94.5.2.1.1.10) . . . . . . . . . . . . . . . . . 5-88

connUnitSnsPortIPAddress (1.3.6.1.3.94.5.2.1.1.11) . . . . . . . . . . . . . 5-89

connUnitSnsFabricPortName (1.3.6.1.3.94.5.2.1.1.12). . . . . . . . . . . . 5-89

connUnitSnsHardAddress (1.3.6.1.3.94.5.2.1.1.13) . . . . . . . . . . . . . . 5-90

connUnitSnsSymbolicPortName (1.3.6.1.3.94.5.2.1.1.14) . . . . . . . . . 5-90

connUnitSnsSymbolicNodeName (1.3.6.1.3.94.5.2.1.1.15) . . . . . . . . 5-91

Platform T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-91

connUnitPlatformMaxEntry (1.3.6.1.3.94.5.1.2) . . . . . . . . . . . . . . . . . 5-91

connUnitPlatformIndex (1.3.6.1.3.94.5.2.2.1.1). . . . . . . . . . . . . . . . . . 5-92

connUnitPlatformNodeIndex (1.3.6.1.3.94.5.2.2.1.2) . . . . . . . . . . . . . 5-92

connUnitPlatformUnitID (1.3.6.1.3.94.5.2.2.1.3) . . . . . . . . . . . . . . . . . 5-92

connUnitPlatformName (1.3.6.1.3.94.5.2.2.1.4) . . . . . . . . . . . . . . . . . 5-93

connUnitPlatformType (1.3.6.1.3.94.5.2.2.1.6) . . . . . . . . . . . . . . . . . . 5-93

connUnitPlatformLabel (1.3.6.1.3.94.5.2.2.1.7). . . . . . . . . . . . . . . . . . 5-93

connUnitPlatformDescription (1.3.6.1.3.94.5.2.2.1.8) . . . . . . . . . . . . . 5-94

connUnitPlatformLocation (1.3.6.1.3.94.5.2.2.1.9) . . . . . . . . . . . . . . . 5-94

connUnitPlatformManagementUrl (1.3.6.1.3.94.5.2.2.1.10) . . . . . . . . 5-95

connUnitPlatformNumNodes (1.3.6.1.3.94.5.2.2.1.11) . . . . . . . . . . . . 5-95

connUnitPlatformNodeName (1.3.6.1.3.94.5.2.2.1.12) . . . . . . . . . . . . 5-95

Trap T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-96

trapMaxClients (1.3.6.1.3.94.2.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-96

59047-09 C

Page xiii

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

trapClientCount (1.3.6.1.3.94.2.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-97

trapRegIpAddress (1.3.6.1.3.94.2.3.1.1) . . . . . . . . . . . . . . . . . . . . . . . 5-97

trapRegPort (1.3.6.1.3.94.2.3.1.2). . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-98

trapRegFilter (1.3.6.1.3.94.2.3.1.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-98

trapRegRowState (1.3.6.1.3.94.2.3.1.4) . . . . . . . . . . . . . . . . . . . . . . . 5-98

connUnitStatusChange (1.3.6.1.3.94.0.1) . . . . . . . . . . . . . . . . . . . . . . 5-100

connUnitDeletedTrap (1.3.6.1.3.94.0.3) . . . . . . . . . . . . . . . . . . . . . . . 5-100

connUnitEventTrap (1.3.6.1.3.94.0.4) . . . . . . . . . . . . . . . . . . . . . . . . . 5-100

connUnitSensorStatusChange (1.3.6.1.3.94.0.5) . . . . . . . . . . . . . . . . 5-102

connUnitPortStatusChange (1.3.6.1.3.94.0.6). . . . . . . . . . . . . . . . . . . 5-102

coldStart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-103

authenticationFailure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-103

Fabric Element MIB Objects

Fibre Channel FE MIB Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuration Grou p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

fcFeFabricName (1.3.6.1.2.1.75.1.1.1) . . . . . . . . . . . . . . . . . . . . . . . .

fcFeElementName (1.3.6.1.2.1.75.1.1.2) . . . . . . . . . . . . . . . . . . . . . .

fcFeModuleCapacity (1.3.6.1.2.1.75.1.1.3) . . . . . . . . . . . . . . . . . . . . .

Module T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2) . . . . . . . . . . . . . . . . . . . .

fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3) . . . . . . . . . . . . . . . . . .

fcFeModuleOperStatus (1.3.6.1.2.1.75.1.1.4.1.4) . . . . . . . . . . . . . . . .

fcFeModuleLastChange (1.3.6.1.2.1.75.1.1.4.1.5) . . . . . . . . . . . . . . .

fcFeModuleFxPortCapacity (1.3.6.1.2.1.75.1.1.4.1.6). . . . . . . . . . . . .

fcFeModuleName (1.3.6.1.2.1.75.1.1.4.1.7) . . . . . . . . . . . . . . . . . . . .

FxPort Configuration T a ble. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

fcFxPortName (1.3.6.1.2.1.75.1.1.5.1.2) . . . . . . . . . . . . . . . . . . . . . . .

fcFxPortFcphVersionHigh (1.3.6.1.2.1.75.1.1.5.1.3) . . . . . . . . . . . . . .

fcFxPortFcphVersionLow (1.3.6.1.2.1.75.1.1.5.1.4) . . . . . . . . . . . . . .

fcFxPortBbCredit (1.3.6.1.2.1.75.1.1.5.1.5). . . . . . . . . . . . . . . . . . . . .

fcFxPortRxBufSize (1.3.6.1.2.1.75.1.1.5.1.6) . . . . . . . . . . . . . . . . . . .

fcFxPortRatov (1.3.6.1.2.1.75.1.1.5.1.7) . . . . . . . . . . . . . . . . . . . . . . .

fcFxPortEdtov (1.3.6.1.2.1.75.1.1.5.1.8) . . . . . . . . . . . . . . . . . . . . . . .

fcFxPortCosSupported (1.3.6.1.2.1.75.1.1.5.1.9) . . . . . . . . . . . . . . . . 6-10

fcFxPortIntermixSupported (1.3.6.1.2.1.75.1.1.5.1.10) . . . . . . . . . . . . 6-10

fcFxPortStackedConnMode (1.3.6.1.2.1.75.1.1.5.1.11). . . . . . . . . . . . 6-10

fcFxPortClass2SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.12) . . . . . . . . . . . . . . 6-11

fcFxPortClass3SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.13) . . . . . . . . . . . . . . 6-11

Page xiv

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

fcFxPortHoldTime (1.3.6.1.2.1.75.1.1.5.1.14) . . . . . . . . . . . . . . . . . . . 6-12

The Status Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

fcFxPortID (1.3.6.1.2.1.75.1.2.1.1.1) . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

fcFxPortBbCreditAvailable (1.3.6.1.2.1.75.1.2.1.1.2) . . . . . . . . . . . . . 6-13

fcFxPortOperMode (1.3.6.1.2.1.75.1.2.1.1.3) . . . . . . . . . . . . . . . . . . . 6-13

fcFxPortAdminMode (1.3.6.1.2.1.75.1.2.1.1.4) . . . . . . . . . . . . . . . . . . 6-14

FxPort Physical Level T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1). . . . . . . . . . . . . . 6-14

fcFxPortPhysOperStatus (1.3.6.1.2.1.75.1.2.2.1.2). . . . . . . . . . . . . . . 6-15

fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3) . . . . . . . . . . . . . . 6-16

fcFxPortPhysRttov (1.3.6.1.2.1.75.1.2.2.1.4) . . . . . . . . . . . . . . . . . . . 6-16

Fx Port Fabric Login T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17

fcFxPortFcphVersionAgreed (1.3.6.1.2.1.75.1.2.3.1.2) . . . . . . . . . . . . 6-17

fcFxPortNxPortBbCredit (1.3.6.1.2.1.75.1.2.3.1.3) . . . . . . . . . . . . . . . 6-17

fcFxPortNxPortRxDataFieldSize (1.3.6.1.2.1.75.1.2.3.1.4 ). . . . . . . . . 6 -18

fcFxPortCosSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.5) . . . . . . . . . . . . . . 6-18

fcFxPortIntermixSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.6) . . . . . . . . . . . 6-19

fcFxPortStackedConnModeAgreed (1.3.6.1.2.1.75.1.2.3.1.7). . . . . . . 6-19

fcFxPortClass2SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.8) . . . . . . . . . 6-20

fcFxPortClass3SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.9) . . . . . . . . . 6-20

fcFxPortNxPortName (1.3.6.1.2.1.75.1.2.3.1.10) . . . . . . . . . . . . . . . . 6-21

fcFxPortConnectedNxPort (1.3.6.1.2.1.75.1.2.3.1.11). . . . . . . . . . . . . 6-21

fcFxPortBbCreditModel (1.3.6.1.2.1.75.1.2.3.1.12 ). . . . . . . . . . . . . . . 6 -21

The Error Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22

fcFxPortLinkFailures (1.3.6.1.2.1.75.1.3.1.1.1) . . . . . . . . . . . . . . . . . . 6-22

fcFxPortSyncLosses (1.3.6.1.2.1.75.1.3.1.1.2) . . . . . . . . . . . . . . . . . . 6-22

fcFxPortSigLosses (1.3.6.1.2.1.75.1.3.1.1.3) . . . . . . . . . . . . . . . . . . . 6-23

fcFxPortPrimSeqProtoErrors (1.3.6.1.2.1.75.1.3.1.1.4). . . . . . . . . . . . 6-23

fcFxPortInvalidTxWords (1.3.6.1.2.1.75.1.3.1.1.5) . . . . . . . . . . . . . . . 6-23

fcFxPortInvalidCrcs (1.3.6.1.2.1.75.1.3.1.1.6 ). . . . . . . . . . . . . . . . . . . 6 -24

fcFxPortDelimiterErrors (1.3.6.1.2.1.75.1.3.1.1.7). . . . . . . . . . . . . . . . 6-24

fcFxPortAddressIdErrors (1.3.6.1.2.1.75.1.3.1.1.8). . . . . . . . . . . . . . . 6-24

fcFxPortLinkResetIns (1.3.6.1.2.1.75.1.3.1.1.9) . . . . . . . . . . . . . . . . . 6-25

fcFxPortLinkResetOuts (1.3.6.1.2.1.75.1.3.1.1.10) . . . . . . . . . . . . . . . 6-25

fcFxPortOlsIns (1.3.6.1.2.1.75.1.3.1.1.11). . . . . . . . . . . . . . . . . . . . . . 6-25

fcFxPortOlsOuts (1.3.6.1.2.1.75.1.3.1.1.12) . . . . . . . . . . . . . . . . . . . . 6-26

Accounting Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26

Class 1 Accounting T a ble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26

fcFxPortC1InFrames (1.3.6.1.2.1.75.1.4.1.1.1 ). . . . . . . . . . . . . . . . . . 6 -26

59047-09 C

Page xv

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

fcFxPortC1OutFrames (1.3.6.1.2.1.75.1.4.1.1.2) . . . . . . . . . . . . . . . . 6-27

fcFxPortC1InOctets (1.3.6.1.2.1.75.1.4.1.1.3). . . . . . . . . . . . . . . . . . . 6-27

fcFxPortC1OutOctets (1.3.6.1.2.1.75.1.4.1.1.4) . . . . . . . . . . . . . . . . . 6-27

fcFxPortC1Discards (1.3.6.1.2.1.75.1.4.1.1.5) . . . . . . . . . . . . . . . . . . 6-28

fcFxPortC1FbsyFrames (1.3.6.1.2.1.75.1.4.1.1.6) . . . . . . . . . . . . . . . 6-28

fcFxPortC1FrjtFrames (1.3.6.1.2.1.75.1.4.1.1.7). . . . . . . . . . . . . . . . . 6-28

fcFxPortC1InConnections (1.3.6.1.2.1.75.1.4.1.1.8) . . . . . . . . . . . . . . 6-29

fcFxPortC1OutConnections (1.3.6.1.2.1.75.1.4.1.1.9) . . . . . . . . . . . . 6-29

fcFxPortC1ConnTime (1.3.6.1.2.1.75.1.4.1.1.10) . . . . . . . . . . . . . . . . 6-30

Class 2 Accounting T a bl e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -30

fcFxPortC2InFrames (1.3.6.1.2.1.75.1.4.2.1.1 ). . . . . . . . . . . . . . . . . . 6 -30

fcFxPortC2OutFrames (1.3.6.1.2.1.75.1.4.2.1.2) . . . . . . . . . . . . . . . . 6-30

fcFxPortC2InOctets (1.3.6.1.2.1.75.1.4.2.1.3). . . . . . . . . . . . . . . . . . . 6-31

fcFxPortC2OutOctets (1.3.6.1.2.1.75.1.4.2.1.4) . . . . . . . . . . . . . . . . . 6-31

fcFxPortC2Discards (1.3.6.1.2.1.75.1.4.2.1.5) . . . . . . . . . . . . . . . . . . 6-32

fcFxPortC2FbsyFrames (1.3.6.1.2.1.75.1.4.2.1.6) . . . . . . . . . . . . . . . 6-32

fcFxPortC2FrjtFrames (1.3.6.1.2.1.75.1.4.2.1.7). . . . . . . . . . . . . . . . . 6-32

Class 3 Accounting T a bl e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -33

fcFxPortC3InFrames (1.3.6.1.2.1.75.1.4.3.1.1 ). . . . . . . . . . . . . . . . . . 6 -33

fcFxPortC3OutFrames (1.3.6.1.2.1.75.1.4.3.1.2) . . . . . . . . . . . . . . . . 6-33

fcFxPortC3InOctets (1.3.6.1.2.1.75.1.4.3.1.3). . . . . . . . . . . . . . . . . . . 6-34

fcFxPortC3OutOctets (1.3.6.1.2.1.75.1.4.3.1.4) . . . . . . . . . . . . . . . . . 6-34

fcFxPortC3Discards (1.3.6.1.2.1.75.1.4.3.1.5) . . . . . . . . . . . . . . . . . . 6-34

Capability Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-35

fcFxPortCapFcphVersionHigh (1.3.6.1.2.1.75.1.5.1.1.1). . . . . . . . . . . 6-35

fcFxPortCapFcphVersionLow (1.3.6.1.2.1.75.1.5.1.1.2) . . . . . . . . . . . 6-35

fcFxPortCapBbCreditMax (1.3.6.1.2.1.75.1.5.1.1.3) . . . . . . . . . . . . . . 6-36

fcFxPortCapBbCreditMin (1.3.6.1.2.1.75.1.5.1.1.4) . . . . . . . . . . . . . . 6-36

fcFxPortCapRxDataFieldSizeMax (1.3.6.1.2.1.75.1.5.1.1.5). . . . . . . . 6-36

fcFxPortCapRxDataFieldSizeMin (1.3.6.1.2.1.75.1.5.1.1.6) . . . . . . . . 6-37

fcFxPortCapCos (1.3.6.1.2.1.75.1.5.1.1.7) . . . . . . . . . . . . . . . . . . . . . 6-37

fcFxPortCapIntermix (1.3.6.1.2.1.75.1.5.1.1.8) . . . . . . . . . . . . . . . . . . 6-37

fcFxPortCapStackedConnMode (1.3.6.1.2.1.75.1.5.1.1.9) . . . . . . . . . 6-38

fcFxPortCapClass2SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.10). . . . . . . . . . . 6-38

fcFxPortCapClass3SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.11 ). . . . . . . . . . . 6 -38

fcFxPortCapHoldTimeMaxv (1.3.6.1.2.1.75.1.5.1.1.12) . . . . . . . . . . . 6-39

fcFxPortCapHoldTimeMin (1.3.6.1.2.1.75.1.5.1.1.13 ). . . . . . . . . . . . . 6 -39

QLOGIC MIB Objects

QLOGIC MIB Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7-1

Page xvi

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

fcQxPortPhysAdminStatus (1.3.6.1.4.1.1663.1.3.10.1.1.3 ). . . . . . . . .

fcQxPortPhysOperStatus (1.3.6.1.4.1.1663.1.3.10.1.1.4) . . . . . . . . . .

qlSB2PortLinkDown (qLogicExperimental 0 10) . . . . . . . . . . . . . . . . .

qlSB2PortLinkUp (qLogicExperimental 0 11) . . . . . . . . . . . . . . . . . . .

qlconnUnitAddedTrap (qLogicExperimental 0 12 ). . . . . . . . . . . . . . . .

7-1

7-2

7-3

Firmware Download MIB Objects

Firmware Download MIB Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

qlgcChFwOpResult (1.3.6.1.4.1.3873.3.1.1.2.1) . . . . . . . . . . . . . . . . .

qlgcChFwOpRequest (1.3.6.1.4.1.3873.3.1.1.2.2) . . . . . . . . . . . . . . .

qlgcChFwDwldHostAddrType (1.3.6.1.4.1.3873.3.1.1.2.3) . . . . . . . . .

qlgcChFwDwldHostAddr (1.3.6.1.4.1.3873.3.1.1.2.4) . . . . . . . . . . . . .

qlgcChFwDwldHostPort (1.3.6.1.4.1.3873.3.1.1.2.5) . . . . . . . . . . . . .

qlgcChFwDwldPathName (1.3.6.1.4.1.3873.3.1.1.2.6) . . . . . . . . . . . .

qlgcChFwDwldFileName (1.3.6.1.4.1.3873.3.1.1.2.7). . . . . . . . . . . . .

qlgcChFwResetMethod (1.3.6.1.4.1.3873.3.1.1.2.8). . . . . . . . . . . . . .

Maintenance Panel Health Check MIB Objects

Maintenance Panel MIB Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

qlgcMPStatus (1.3.6.1.4.1.3873.3.2.1.1.1) . . . . . . . . . . . . . . . . . . . . .

qlgcMPStatusChange (1.3.6.1.4.1.3873.3.2.0.1). . . . . . . . . . . . . . . . .

List of Figures

Figure

Page

2-1

5-1

SNMP Interface Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

connUnitEventDescr Variable Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-100

2-2

List of Tables

Table

Page

Trap Severity Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MIB-II Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FA-MIB T e xtual Substitutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switch Operational States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SANbox 5000 Series Connectivity Unit Return Values . . . . . . . . . . . . . . . . . . . . . .

SANbox 9000 Series Connectivity Unit Return Values . . . . . . . . . . . . . . . . . . . . . .

connUnitContol Read Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17

59047-09 C

Page xvii

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

connUnitContol Write Control Value s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -17

connUnitEventFilter Read Return Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18

connUnitEventFilter Control Write Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19

SANbox 5000/9000 Series ConnUnitRevsRevId Return Values . . . . . . . . . . . . . . . 5-23

5-10 SANbox 5200/5600 Series ConnUnitRevsDescription Return Value s . . . . . . . . . . . 5 -23

5-11 SANbox 5200/5600 ConnUnitSensorName Return Values . . . . . . . . . . . . . . . . . . . 5-25

5-12 SANbox 5202/5602 ConnUnitSensorName Return Values . . . . . . . . . . . . . . . . . . . 5-26

5-13 SANbox 9000 ConnUnitSensorName Return Values . . . . . . . . . . . . . . . . . . . . . . . 5-26

5-14 ConnUnitSensorStatus Return Values for Board T e mperature . . . . . . . . . . . . . . . . 5-27

5-15 ConnUnitSensorStatus Return Values for Fan Status . . . . . . . . . . . . . . . . . . . . . . . 5-27

5-16 ConnUnitSensorStatus Return Values for Voltage Status . . . . . . . . . . . . . . . . . . . . 5-27

5-17 ConnUnitSensorMessage Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28

5-18 ConnUnitSensorType Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29

5-19 ConnUnitSensorCharacteristic Value s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -30

5-20 ConnUnitPortType Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32

5-21 ConnUnitPortState Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35

5-22 ConnUnitPortTransmitterType Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-36

5-23 ConnUnitPortModuleType Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-37

5-24 ConnUnitPortControl Read Return Value s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41

5-25 ConnUnitPortControl Write Command Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41

5-26 ConnUnitPortHWState Port State Return Value s . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -45

5-27 ConnUnitPortType State Return Value s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -89

5-28 Trap Severity Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-96

5-29 connUnitEventDescr Variable Field Description s . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -101

5-30 Filter Trap Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-101

FA-MIB T e xtual Substitutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Module Operational Status Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Port Operational Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

fcFxPortPhysAdminStatus Read Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

fcFxPortPhysAdminStatus Write Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

fcFxPortPHysOperStatus Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16

fcQxPortPhysAdminStatus Read Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . .

fcQxPortPhysAdminStatus Write Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

fcFxPortPHysOperStatus Return Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page xviii

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Introduction

This guide describes the support for Simple Network Management Protocol

(SNMP) used with SANbox switch products. This Simple Network Management

Protocol Reference Guide describes how to use SNMP to manage and monitor

the SANbox switch products.

This guide is organized as follows:

„

Section 2 provides an overview of SNMP objectives, managers and agents,

traps, Management Information Bases (MIB), and User Datagram Protocol.

„

Section 3 describes how to configure a SANbox switch using Telnet and the

Enterprise Fabric Suite 2007 graphical user interface.

„

Section 4 describes the Management Information Bases (MIB-II).

Section 5 describes the Fibre Alliance - Management Information Bases

(FA-MIB version 4.0).

„

Section 6 describes the Fabric Element - Management Information Bases

(FE-MIB).

Section 7 describes the QLOGIC Management Information Bases

(QLOGIC-MIB).

Section 8 describes the Firmware Download Management Information

Bases (FD-MIB).

Intended Audience

This guide is intended for users responsible for the support of SNMP and SANbox

switch configurations.

59047-09 C

1-1

Download from Www.Somanuals.com. All Manuals Search And Download.

1 – Introduction

Related Materials

Refer to the following publications for switch hardware and installation

information:

„

SANbox 5600 Series Enterprise Fabric Suite 2007 User Guide, publication

number 59097-06.

SANbox 5802V Enterprise Fabric Suite 2007 User Guide, publication

number 59266-00 A.

SANbox 5802V Fibre Channel Switch Installation Guide, publication number

59265-01.

SANbox 5600 Series Fibre Channel Switch Installation Guide, publication

number 59096-06.

SANbox 5802V Fibre Channel Switch Command Line Interface Guide,

publication number 59263-01.

SANbox 5600 Series Fibre Channel Switch Command Line Interface Guide,

publication number 59183-03.

Technical Support

Customers should contact their authorized maintenance provider for technical

support of their QLogic switch products. QLogic-direct customers may contact

QLogic Technical Support; others will be redirected to their authorized

maintenance provider.

Visit the QLogic switch support Web site listed in “Contact Information” on

page 1-3 for the latest firmware and software updates.

Availability

QLogic Technical Support is available from 7:00 AM to 7:00 PM Central Standard

Time, Monday through Friday, excluding QLogic-observed holidays.

Training

QLogic offers certification training for the technical professional for both the

SANblade HBAs and the SANbox switches. From the training link at

www.qlogic.com, you may choose Electronic-Based Training or schedule an

intensive "hands-on" Certification course.

1-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

1 – Introduction

Technical Support

Contact Information

Please feel free to contact your QLogic approved reseller or QLogic Technical

Support at any phase of integration for assistance. QLogic Technical Support can

be reached by the following methods:

Web

http://support.qlogic.com

North America Contact Information

[email protected]

(952) 932-4040

Phone

Support contact information for other regions of the world is available at the

QLogic website: http://support.qlogic.com

The QLogic knowledge database contains troubleshooting information for the

QLogic HBAs. Access the data base from the QLogic web site, www.qlogic.com.

Click the Support tab, Use the search engine at the top of the page to look for

specific troubleshooting information.

59047-09 C

1-3

Download from Www.Somanuals.com. All Manuals Search And Download.

1 – Introduction

Technical Support

Notes

1-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

2 SNMP Overview

Simple Network Management Protocol is the protocol governing network

management and monitoring of network devices. This Simple Network

Management Protocol Reference Guide describes how to use SNMP to manage

and monitor the SANbox switch products. Specifically, this guide describes the

SNMP agent that resides on the switch.

The following topics are covered in this section:

„

SNMP interface objectives

Manager and agent

Traps

Management information bases (MIBs)

User datagram protocol (UDP)

Numbering system conventions

SNMP Interface Objectives

The objectives of the SNMP Interface are as follows:

„

Connect to the SNMP agent that resides on the switch using a management

workstation.

„

Support of Fabric Element Management Information Bases (FE-MIB)

(rfc2837) and Fibre Alliance Management Information Bases (FA-MIB) draft.

„

Support of version 1 and 2 traps.

The SNMP agent supports SNMPv1and SNMPv2c.

Manager and Agent

The two primary elements of SNMP are:

„

Manager — the application that runs on the management workstation.

Agent — the daemon application that runs on the switch.

59047-09 C

2-1

Download from Www.Somanuals.com. All Manuals Search And Download.

2 – SNMP Overview

Traps

The Manager is the application through which the network administrator performs

network management functions. The SNMP agent is the direct interface on the

switch for any SNMP manager connecting to the switch using the SNMP protocol,

as shown in Figure 2-1. The agent will be started by the script file(s) responsible

for switch initialization when the switch powers up or when the switch is reset.

When an SNMP request arrives at the agent, the agent will compose a message

and pass it on to Switch Management to process the message and provide a

response to the agent. The agent then provides a response to the originator of the

SNMP request. The SNMP agent does not have direct access to the internal

database of the switch.

Workstation with SNMP

Manager Application

Ethernet Connection

Switch with Agent and

Common User Interface API

Figure 2-1 SNMP Interface Architecture

Traps

Traps are notification messages sent from the switch to a registered manager

when a change of state occurs within the switch. A change of state can be an

alarm condition or simply a configuration change.

The Fibre Alliance MIB defines a trap table configurable through SNMP. A trap

table may have up to 5 entries, and can be configured using the SNMP Manager

or Enterprise Fabric Suite 2007 graphical user interface. The same trap table

information is available to both SNMP Manager and Enterprise Fabric Suite 2007.

A trap event is reported when the incoming error has a severity level less than or

equal to the configured severity level. The trap event types and trap severity levels

are listed in T a ble 2-1. Refer to T a ble 5-1 for information on specific traps.

2-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

2 – SNMP Overview

Management Information Base

Table 2-1. Trap Severity Levels

Event Type Severity Level

Unknown

Emergency

Alert

Critical

Error

Warning

Notify

Info

Debug

Mark

Management Information Base

Management information bases (MIBs) define the properties of the managed

object within the device to be managed. Every managed device keeps a database

of values for each definition written in the MIB. It is not the actual database itself; it

is implementation dependant. Definition of the MIB conforms to the Structure of

Management Information (SMI) given in Request For Comment (RFC) 1155. The

latest Internet MIB is given in RFC 1213, and is sometimes called MIB-II.

User Datagram Protocol

SANbox switches support the following User Datagram Protocol (UDP) settings:

„

Agents “listen” on UDP port 161.

Responses are sent back to the originating Network Management Station

(NMS) port from a dynamic port, although many agents use port 161 also for

this target.

„

The maximum SNMP message size is 65507 octets (maximum UDP

message size).

The minimum receive packet size for SNMP implementations is 484 octets

in length.

Agent and Network Monitoring Systems are responsible for determining

error recovery.

59047-09 C

2-3

Download from Www.Somanuals.com. All Manuals Search And Download.

2 – SNMP Overview

Numbering System Conventions

The conventions for numbering systems in this guide are as follows:

„

Decimal = 101

Hexadecimal = 0x101

Binary = 101b

2-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Configuring a Switch

This section describes how to configure a SANbox switch to support SNMP. The

following topics are covered:

„

System specifications and requirements

Configuring a switch using the Telnet command line interface

Configuring a switch using the Enterprise Fabric Suite 2007 application

System Specifications and Requirements

„

SANbox switches support SNMPv1 and SNMPv2c.

Version 1 and 2 traps are supported.

Hardware — one out-of-band Ethernet connection is required.

Software — one switch management software application allows you to:

‰

Monitor and control the switch.

Read, write, and receive trap information, if supported.

„

Ports on the switch reserved for SNMP:

‰

Port 161 is not configurable, and is used for the standard SNMP

commands.

‰

Port 162 is configurable and is the default port used for traps.

„

One or more in-band switches can be managed by an out-of-band SANbox

switch acting as a proxy switch.

„

SANbox can only act as a proxy for other SANbox switches.

SANbox proxy capability can be disabled.

59047-09 C

3-1

Download from Www.Somanuals.com. All Manuals Search And Download.

3 – Configuring a Switch

Configuring a Switch Using the Command Line Interface

Configuring a Switch Using the Command Line

Interface

The Telnet command line interface offers a convenient way to change SNMP

parameters. SNMP parameter defaults are preset during manufacturing. For

security purposes, these default values should be changed. For specific

information about SNMP parameters, refer to the SNMP Configuration section in

the corresponding SANbox Switch Management User Guide. To configure a

switch using the command line interface, do the following.

3-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

3 – Configuring a Switch

Configuring a Switch Using the Command Line Interface

Press the Enter key to accept the default value for each parameter.

SB5600.116.50 (admin) #> set setup snmp

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the attributes

for the category being processed, press 'q' or 'Q' and the ENTER key to do so.

If you wish to terminate the configuration process completely, press 'qq' or

'QQ' and the ENTER key to do so.

SNMP System Configuration - may optionally use 'set setup snmp common'

command.

Current Values:

SnmpEnabled

Contact

True

public

Location

ReadCommunity

WriteCommunity

private

AuthFailureTrap False

ProxyEnabled

SNMPv3Enabled

True

False

New Value (press ENTER to not specify value, 'q' to quit):

SnmpEnabled

Contact

(True / False)

(string, max=64 chars) :

(string, max=32 chars) :

Location

ReadCommunity

WriteCommunity

AuthFailureTrap (True / False)

ProxyEnabled

SNMPv3Enabled

(True / False)

SNMP Trap 1 Configuration - may optionally use 'set setup snmp trap 1'

command.

Current Values:

Trap1Enabled

Trap1Address

Trap1Port

False

10.0.0.254

5001

Trap1Severity

Trap1Version

info

Trap1Community public

New Value (press ENTER to not specify value, 'q' to quit):

Trap1Enabled

Trap1Address

Trap1Port

(True / False)

(hostname, IPv4, or IPv6 Address) :

(decimal value, 1-65535)

(select a severity level)

Trap1Severity

1=unknown

6=warning

59047-09 C

3-3

Download from Www.Somanuals.com. All Manuals Search And Download.

3 – Configuring a Switch

Configuring a Switch Using the Command Line Interface

2=emergency

3=alert

7=notify

8=info

4=critical

5=error

9=debug

10=mark

Trap1Version

(1 / 2)

Trap1Community (string, max=32 chars)

SNMP Trap 2 Configuration - may optionally use 'set setup snmp trap 2'

command.

Current Values:

Trap2Enabled

Trap2Address

Trap2Port

False

10.20.43.231

162

info

Trap2Severity

Trap2Version

Trap2Community public

New Value (press ENTER to not specify value, 'q' to quit):

Trap2Enabled

Trap2Address

Trap2Port

(True / False)

(hostname, IPv4, or IPv6 Address) :

(decimal value, 1-65535)

(select a severity level)

Trap2Severity

1=unknown

2=emergency

3=alert

6=warning

7=notify

8=info

4=critical

5=error

9=debug

10=mark

Trap2Version

(1 / 2)

Trap2Community (string, max=32 chars)

SNMP Trap 3 Configuration - may optionally use 'set setup snmp trap 3'

command.

Current Values:

Trap3Enabled

Trap3Address

Trap3Port

False

10.20.33.231

162

Trap3Severity

Trap3Version

warning

Trap3Community public

New Value (press ENTER to not specify value, 'q' to quit):

Trap3Enabled

Trap3Address

Trap3Port

(True / False)

(hostname, IPv4, or IPv6 Address) :

(decimal value, 1-65535)

(select a severity level)

Trap3Severity

1=unknown

6=warning

7=notify

2=emergency

3-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

3 – Configuring a Switch

Configuring a Switch Using the Command Line Interface

3=alert

8=info

4=critical

5=error

9=debug

10=mark

Trap3Version

(1 / 2)

Trap3Community (string, max=32 chars)

SNMP Trap 4 Configuration - may optionally use 'set setup snmp trap 4'

command.

Current Values:

Trap4Enabled

Trap4Address

Trap4Port

False

0.0.0.0

162

Trap4Severity

Trap4Version

warning

Trap4Community public

New Value (press ENTER to not specify value, 'q' to quit):

Trap4Enabled

Trap4Address

Trap4Port

(True / False)

(hostname, IPv4, or IPv6 Address) :

(decimal value, 1-65535)

(select a severity level)

Trap4Severity

1=unknown

2=emergency

3=alert

6=warning

7=notify

8=info

4=critical

5=error

9=debug

10=mark

Trap4Version

(1 / 2)

Trap4Community (string, max=32 chars)

SNMP Trap 5 Configuration - may optionally use 'set setup snmp trap 5'

command.

Current Values:

Trap5Enabled

Trap5Address

Trap5Port

False

0.0.0.0

162

Trap5Severity

Trap5Version

warning

Trap5Community public

New Value (press ENTER to not specify value, 'q' to quit):

Trap5Enabled

Trap5Address

Trap5Port

(True / False)

(hostname, IPv4, or IPv6 Address) :

(decimal value, 1-65535)

(select a severity level)

Trap5Severity

1=unknown

2=emergency

3=alert

6=warning

7=notify

8=info

59047-09 C

3-5

Download from Www.Somanuals.com. All Manuals Search And Download.

3 – Configuring a Switch

Configuring a Switch Using Enterprise Fabric Suite 2007

4=critical

5=error

9=debug

10=mark

Trap5Version

(1 / 2)

Trap5Community (string, max=32 chars)

Do you want to save and activate this snmp setup? (y/n): [n]

SNMP setup NEITHER saved NOR activated.

SB5600.116.50 (admin) #>

Configuring a Switch Using Enterprise Fabric

Suite 2007

To configure a SANbox switch using Enterprise Fabric Suite 2007, use the SNMP

Properties, Switch Properties, and Network Properties dialogs. For specific

information, refer to the corresponding Switch Management User’s Guide.

3-6

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 MIB-II Objects

This section covers the implementation details for the MIB-II on the SANbox

switch. A MIB defines the properties of the managed object within the device to be

managed. Every managed device keeps a database of values for each definition

written in the MIB. It is not the actual database itself; it is implementation

dependant. Definition of the MIB conforms to the SMI given in RFC 1155. The

latest Internet MIB is given in RFC 1213, and is sometimes called MIB-II.

Groups in MIB-II

Refer the T a ble 4-1 for the syntax for MIB-II Groups.

Table 4-1. MIB-II Groups

Group

Syntax

system

OBJECT IDENTIFIER ::= { mib-2 1 }

OBJECT IDENTIFIER ::= { mib-2 2 }

OBJECT IDENTIFIER ::= { mib-2 3 }

OBJECT IDENTIFIER ::= { mib-2 4 }

OBJECT IDENTIFIER ::= { mib-2 5 }

OBJECT IDENTIFIER ::= { mib-2 6 }

OBJECT IDENTIFIER ::= { mib-2 7 }

OBJECT IDENTIFIER ::= { mib-2 11 }

interfaces

icmp

tcp

udp

snmp

System Group

Implementation of the System group is mandatory for all systems. If an agent is

not configured to have a value for any of these variables, a string of length 0 is

returned.

59047-09 C

4-1

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

System Group

sysDescr (1.3.6.1.2.1.1.1)

A textual description of the entity. This value should include the full name and

version identification of the system's hardware type, operating-system, and

networking software. It is mandatory that this only contain printable American

Standard Code for Information Interchange (ASCII) characters.

Syntax

DisplayString (SIZE (0..255))

Access

read-only

Status

Mandatory

Return Value

The default values are: SANbox 5200 = SANbox 5200 FC Switch, SANbox

5202 = SANbox 5202 FC Switch, SANbox 5600 = SANbox 5600 FC Switch,

SANbox 5602 = SANbox 5602 FC Switch

sysObjectID (1.3.6.1.2.1.1.2)

The vendor's authoritative identification of the network management subsystem

contained in the entity. This value is allocated within the SMI enterprise subtree

(1.3.6.1.4.1) and provides an easy and unambiguous means for determining

`what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was

assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier

1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Syntax

OBJECT IDENTIFIER

Access

read-only

Status

mandatory

Return Value

The values are: SANbox 5200 = 1.3.6.1.4.1.1663.1.1.1.1.17, SANbox 5202

= 1.3.6.1.4.1.1663.1.1.1.1.30, SANbox 5600 = 1.3.6.1.4.1.1663.1.1.1.1.23,

and SANbox 5602 = 1.3.6.1.4.1.1663.1.1.1.1.24

4-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

System Group

sysUpTime (1.3.6.1.2.1.1.3)

The time, in hundredths of a second, since the network management portion of

the system was last re-initialized.

Syntax

TimeTicks

Access

read-only

Status

mandatory

Return Value

The time since the switch was powered on, or last reset (reset, hardreset, or

hotreset) was executed. For example, 3 days 21 hours, 5 minutes, and

26.84 seconds. The value will roll over after approximately 497 days of

continuous up time.

sysContact (1.3.6.1.2.1.1.4)

The textual identification of the contact person for this managed Node, together

with information on how to contact this person.

Syntax

DisplayString (SIZE (0..255))

Access

read-write

Status

mandatory

Return Value

The default is: <sysContact undefined>. The string size is limited to a

maximum of 64.

sysName (1.3.6.1.2.1.1.5)

An administratively-assigned name for this managed Node. By convention, this is

the Node's fully-qualified domain name.

Syntax

DisplayString (SIZE (0..255))

59047-09 C

4-3

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

System Group

Access

read-write

Status

mandatory

Return Value

The defaults are: SANbox 5200 Series = SANbox, SANbox 5600 Series =

SANbox

sysLocation (1.3.6.1.2.1.1.6)

The physical location of this Node, such as telephone closet and 3rd floor.

Syntax

DisplayString (SIZE (0..255))

Access

read-write

Status

mandatory

Return Value

The default is: <sysLocation undefined>. The string size is limited to a

maximum of 64.

sysServices (1.3.6.1.2.1.1.7)

A value that indicates the set of services that this entity primarily offers.The value

is a sum. This sum initially takes the value zero. Then, for each layer L in the

range 1 through 7 that this Node performs transactions for, 2 raised to (L - 1) is

added to the sum. For example, a Node that performs primarily routing functions

would have a value of 4 (2^(3-1)). In contrast, a Node that is a host offering

application services would have a value of 72 (2^(4-1) + 2^(7-1)).

Syntax

INTEGER (0..127)

Access

read-only

Status

mandatory

4-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Interfaces Group

Return Value

The default is: 2

The Interfaces Group

Implementation of the Interfaces group is mandatory for all systems.

ifNumber (1.3.6.1.2.1.2.1)

The number of network interfaces (regardless of their current state) present on

this system.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

The default is: 2

The Interfaces Table

The Interfaces table contains information on the entity's interfaces. Each interface

is thought of as being attached to a `subnetwork'. This term should not be

confused with `subnet' which refers to an addressing partitioning scheme used in

the Internet suite of protocols.

ifIndex (1.3.6.1.2.1.2.2.1.1)

A unique value for each interface. Its value ranges between 1 and the value of

ifNumber. The value for each interface must remain constant at least from one

re-initialization of the entity's network management system to the next

re-initialization.

Syntax

INTEGER

Access

read-only

Status

mandatory

59047-09 C

4-5

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Interfaces Table

ifDescr (1.3.6.1.2.1.2.2.1.2)

A textual string containing information about the interface. This string should

include the name of the manufacturer, the product name, and the version of the

hardware interface.

Syntax

DisplayString (SIZE (0..255))

Access

read-only

Status

mandatory

ifType (1.3.6.1.2.1.2.2.1.3)

The type of interface distinguished according to the physical/link protocol(s)

immediately `below' the network layer in the protocol stack.

Syntax

INTEGER

Access

read-only

Status

mandatory

ifMtu (1.3.6.1.2.1.2.2.1.4)

The size of the largest datagram which can be sent/received on the interface,

specified in octets. For interfaces that are used for transmitting network

datagrams, this is the size of the largest network datagram that can be sent on the

interface.

Syntax

INTEGER

Access

read-only

Status

mandatory

4-6

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Interfaces Table

ifSpeed (1.3.6.1.2.1.2.2.1.5)

An estimate of the interface's current bandwidth in bits per second. For interfaces

that do not vary in bandwidth or for those where no accurate estimation can be

made, this object should contain the nominal bandwidth.

Syntax

Gauge

Access

read-only

Status

mandatory

ifPhysAddress (1.3.6.1.2.1.2.2.1.6)

The interface's address at the protocol layer immediately “below” the network

layer in the protocol stack. For interfaces that do not have such an address, such

as a serial line, this object should contain an octet string of zero length.

Syntax

PhysAddress

Access

read-only

Status

mandatory

ifAdminStatus (1.3.6.1.2.1.2.2.1.7)

The desired state of the interface. The testing(3) state indicates that no

operational packets can be passed.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Writes not supported.

59047-09 C

4-7

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Interfaces Table

ifOperStatus (1.3.6.1.2.1.2.2.1.8)

The current operational state of the interface. The testing(3) state indicates that

no operational packets can be passed.

Syntax

INTEGER

Access

read-only

Status

mandatory

ifLastChange (1.3.6.1.2.1.2.2.1.9)

The value of sysUpTime at the time the interface entered its current operational

state. If the current state was entered prior to the last re-initialization of the local

network management subsystem, then this object contains a zero value.

Syntax

TimeTicks

Access

read-only

Status

mandatory

ifInOctets (1.3.6.1.2.1.2.2.1.10)

The total number of octets received on the interface, including framing characters.

Syntax

Counter

Access

read-only

Status

mandatory

ifInUcastPkts (1.3.6.1.2.1.2.2.1.11)

The number of subnetwork-unicast packets delivered to a higher-layer protocol.

4-8

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Interfaces Table

Syntax

Counter

Access

read-only

Status

mandatory

ifInNUcastPkts (1.3.6.1.2.1.2.2.1.12)

The number of non-unicast (that is, subnetwork- broadcast or

subnetwork-multicast) packets delivered to a higher-layer protocol.

Syntax

Counter

Access

read-only

Status

mandatory

ifInDiscards (1.3.6.1.2.1.2.2.1.13)

The number of inbound packets that were chosen to be discarded even though no

errors had been detected to prevent their being deliverable to a higher-layer

protocol. One possible reason for discarding such a packet could be to free up

buffer space.

Syntax

Counter

Access

read-only

Status

mandatory

ifInErrors (1.3.6.1.2.1.2.2.1.14)

The number of inbound packets that contained errors preventing them from being

deliverable to a higher-layer protocol.

Syntax

Counter

59047-09 C

4-9

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Interfaces Table

Access

read-only

Status

mandatory

ifInUnknownProtos (1.3.6.1.2.1.2.2.1.15)

The number of packets received from the interface that were discarded because

of an unknown or unsupported protocol.

Syntax

Counter

Access

read-only

Status

mandatory

ifOutOctets (1.3.6.1.2.1.2.2.1.16)

The total number of octets transmitted out of the interface, including framing

characters.

Syntax

Counter

Access

read-only

Status

mandatory

ifOutUcastPkts (1.3.6.1.2.1.2.2.1.17)

The total number of packets that higher level protocols requested be transmitted

to a subnetwork unicast address, including those that were discarded or not sent.

Syntax

Counter

Access

read-only

4-10

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Interfaces Table

Status

mandatory

ifOutNUcastPkts (1.3.6.1.2.1.2.2.1.18)

The total number of packets that higher level protocols requested be transmitted

to a non-unicast (subnetwork broadcast or subnetwork multicast) address,

including those that were discarded or not sent.

Syntax

Counter

Access

read-only

Status

mandatory

ifOutDiscards (1.3.6.1.2.1.2.2.1.19)

The number of outbound packets that were chosen to be discarded even though

no errors had been detected to prevent their being transmitted. One possible

reason for discarding such a packet could be to free up buffer space.

Syntax

Counter

Access

read-only

Status

mandatory

ifOutErrors (1.3.6.1.2.1.2.2.1.20)

The number of outbound packets that could not be transmitted because of errors.

Syntax

Counter

Access

read-only

Status

mandatory

59047-09 C

4-11

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Address Translation Group

ifOutQLen (1.3.6.1.2.1.2.2.1.21)

The length (in packets) of the output packet queue.

Syntax

Gauge

Access

read-only

Status

mandatory

ifSpecific (1.3.6.1.2.1.2.2.1.22)

A reference to MIB definitions specific to the particular media being used to realize

the interface. For example, if the interface is realized by an Ethernet, then the

value of this object refers to a document that defines objects specific to Ethernet.

If this information is not present, its value should be set to the OBJECT

IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any

conformant implementation of ASN.1 (Abstract Syntax Notation) and BER must

be able to generate and recognize this value.

Syntax

OBJECT IDENTIFIER

Access

read-only

Status

mandatory

The Address Translation Group

Implementation of the Address Translation group is mandatory for all systems.

However, this group is deprecated by MIB-II. That is, it is being included solely for

compatibility with MIB-I Nodes, and will most likely be excluded from MIB-III

Nodes. From MIB-II and onwards, each network protocol group contains its own

address translation tables.

The Address Translation group contains one table which is the union across all

interfaces of the translation tables for converting a NetworkAddress (for example,

an IP address) into a subnetwork-specific address. For lack of a better term, this

document refers to such a subnetwork-specific address as a `physical' address.

4-12

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Address Translation Group

Examples of such translation tables are for: broadcast media where ARP is in use,

the translation table is equivalent to the ARP cache, or on an X.25 network where

non-algorithmic translation to X.121 addresses is required. The translation table

contains the NetworkAddress to X.121 address equivalences.

atIfIndex (1.3.6.1.2.1.3.1.1.1)

The interface on which this entry's equivalence is effective. The interface

identified by a particular value of this index is the same interface as identified by

the same value of ifIndex.

Syntax

INTEGER

Access

read-write

Status

deprecated

atPhysAddress (1.3.6.1.2.1.3.1.1.2)

The media-dependent “physical” address. Setting this object to a null string (one

of zero length) has the effect of invalidating the corresponding entry in the atTable

object. That is, it effectively disassociates the interface identified with the entry

from the mapping identified with the entry. It is an implementation-specific matter

as to whether the agent removes an invalidated entry from the table. Accordingly,

management workstations must be prepared to receive tabular information from

agents that corresponds to entries not currently in use. Proper interpretation of

such entries requires examination of the relevant atPhysAddress object.

Syntax

PhysAddress

Access

read-write

Status

deprecated

atNetAddress (1.3.6.1.2.1.3.1.1.3)

The NetworkAddress corresponding to the media-dependent `physical' address.

Syntax

NetworkAddress

59047-09 C

4-13

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Group

Access

read-write

Status

deprecated

The IP Group

Implementation of the IP group is mandatory for all systems.

ipForwarding (1.3.6.1.2.1.4.1)

The indication of whether this entity is acting as an IP Gateway with respect to the

forwarding of datagrams received by, but not addressed to, this entity. IP

Gateways forward datagrams; IP hosts do not (except those source-routed from

the host).

For some managed Nodes, this object may take on only a subset of the values

possible. Accordingly, it is appropriate for an agent to return a “badValue”

response if a management station attempts to change this object to an

inappropriate value.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Returns forwarding (1). Writes not supported.

ipDefaultTTL (1.3.6.1.2.1.4.2)

The default value inserted into the Time-To-Live field of the IP header of

datagrams originated at this entity whenever a TTL value is not supplied by the

transport layer protocol.

Syntax

INTEGER

Access

read-write

4-14

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Group

Status

mandatory

Return Value

Returns 64 (0x40). Writes not supported.

ipInReceives (1.3.6.1.2.1.4.3)

The total number of input datagrams received from interfaces, including those

received in error.

Syntax

Counter

Access

read-only

Status

mandatory

ipInHdrErrors (1.3.6.1.2.1.4.4)

The number of input datagrams discarded due to errors in their IP headers. These

include bad checksums, version number mismatch, other format errors,

time-to-live exceeded, and errors discovered in processing their IP options.

Syntax

Counter

Access

read-only

Status

mandatory

ipInAddrErrors (1.3.6.1.2.1.4.5)

The number of input datagrams discarded because the IP address in their IP

header's destination field was not a valid address to be received at this entity. This

count includes invalid addresses (for example, 0.0.0.0) and addresses of

unsupported Classes (for example, Class E). For entities which are not IP

Gateways and therefore do not forward datagrams, this counter includes

datagrams discarded because the destination address was not a local address.

Syntax

Counter

59047-09 C

4-15

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Group

Access

read-only

Status

mandatory

ipForwDatagrams (1.3.6.1.2.1.4.6)

The number of input datagrams for which this entity was not their final IP

destination. As a result, an attempt was made to find a route to forward them to

that final destination. In entities that do not act as IP Gateways, this counter will

include only those packets that were Source Routed from this entity, and the

Source Route option processing was successful.

Syntax

Counter

Access

read-only

Status

mandatory

ipInUnknownProtos (1.3.6.1.2.1.4.7)

The number of locally-addressed datagrams received successfully but discarded

because of an unknown or unsupported protocol.

Syntax

Counter

Access

read-only

Status

mandatory

ipInDiscards (1.3.6.1.2.1.4.8)

The number of input IP datagrams for which no problems were encountered to

prevent their continued processing, but which were discarded (for example, for

lack of buffer space). This counter does not include any datagrams discarded

while awaiting reassembly.

Syntax

Counter

4-16

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Group

Access

read-only

Status

mandatory

ipInDelivers (1.3.6.1.2.1.4.9)

The total number of input datagrams successfully delivered to IP user protocols

(including ICMP).

Syntax

Counter

Access

read-only

Status

mandatory

ipOutRequests (1.3.6.1.2.1.4.10)

The total number of IP datagrams that local IP user protocols (including ICMP)

supplied to IP in requests for transmission. This counter does not include any

datagrams counted in ipForwDatagrams.

Syntax

Counter

Access

read-only

Status

mandatory

ipOutDiscards (1.3.6.1.2.1.4.11)

The number of output IP datagrams for which no problem was encountered to

prevent their transmission to their destination, but which were discarded (for

example, for lack of buffer space). This counter would include datagrams counted

in ipForwDatagrams if any such packets met this (discretionary) discard criterion.

Syntax

Counter

59047-09 C

4-17

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Group

Access

read-only

Status

mandatory

ipOutNoRoutes (1.3.6.1.2.1.4.12)

The number of IP datagrams discarded because no route could be found to

transmit them to their destination. This counter includes any packets counted in

ipForwDatagrams which meet this “no-route” criterion. This includes any

datagrams that a host cannot route because all of its default gateways are down.

Syntax

Counter

Access

read-only

Status

mandatory

ipReasmTimeout (1.3.6.1.2.1.4.13)

The maximum number of seconds which received fragments are held while they

are awaiting reassembly at this entity.

Syntax

INTEGER

Access

read-only

Status

mandatory

ipReasmReqds (1.3.6.1.2.1.4.14)

The number of IP fragments received that needed to be reassembled at this entity.

Syntax

Counter

Access

read-only

4-18

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Group

Status

mandatory

ipReasmOKs (1.3.6.1.2.1.4.15)

The number of IP datagrams successfully reassembled.

Syntax

Counter

Access

read-only

Status

mandatory

ipReasmFails (1.3.6.1.2.1.4.16)

The number of failures detected by the IP reassembly algorithm for example,

timed out, errors). This is not necessarily a count of discarded IP fragments, since

some algorithms (notably the algorithm in RFC 815) can lose track of the number

of fragments by combining them as they are received.

Syntax

Counter

Access

read-only

Status

mandatory

ipFragOKs (1.3.6.1.2.1.4.17)

The number of IP datagrams that have been successfully fragmented at this

entity.

Syntax

Counter

Access

read-only

Status

mandatory

59047-09 C

4-19

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Address Table

ipFragFails (1.3.6.1.2.1.4.18)

The number of IP datagrams that have been discarded because they needed to

be fragmented at this entity, but could not because their Don't Fragment flag was

set.

Syntax

Counter

Access

read-only

Status

mandatory

ipFragCreates (1.3.6.1.2.1.4.19)

The number of IP datagram fragments that have been generated as a result of

fragmentation at this entity.

Syntax

Counter

Access

read-only

Status

mandatory

The IP Address Table

The IP address table contains this entity's IP addressing information.

ipAdEntAddr (1.3.6.1.2.1.4.20.1.1)

The IP address to which this entry's addressing information pertains.

Syntax

IpAddress

Access

read-only

Status

mandatory

4-20

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Address Table

ipAdEntIfIndex (1.3.6.1.2.1.4.20.1.2)

The index value which uniquely identifies the interface to which this entry is

applicable. The interface identified by a particular value of this index is the same

interface as identified by the same value of ifIndex.

Syntax

INTEGER

Access

read-only

Status

mandatory

ipAdEntNetMask (1.3.6.1.2.1.4.20.1.3)

The subnet mask associated with the IP address of this entry. The value of the

mask is an IP address with all the network bits set to 1 and all the hosts bits set to

Syntax

IpAddress

Access

read-only

Status

mandatory

ipAdEntBcastAddr (1.3.6.1.2.1.4.20.1.4)

The value of the least-significant bit in the IP broadcast address used for sending

datagrams on the (logical) interface associated with the IP address of this entry.

For example, when the Internet standard all-ones broadcast address is used, the

value will be 1. This value applies to both the subnet and network broadcasts

addresses used by the entity on this (logical) interface.

Syntax

INTEGER

Access

read-only

Status

mandatory

59047-09 C

4-21

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Routing Table

ipAdEntReasmMaxSize (1.3.6.1.2.1.4.20.1.5)

The size of the largest IP datagram which this entity can reassemble from

incoming IP fragmented datagrams received on this interface.

Syntax

INTEGER (0..65535)

Access

read-only

Status

mandatory

The IP Routing Table

The IP routing table contains an entry for each route presently known to this entity.

ipRouteDest (1.3.6.1.2.1.4.21.1.1)

The destination IP address of this route. An entry with a value of 0.0.0.0 is

considered a default route. Multiple routes to a single destination can appear in

the table, but access to such multiple entries is dependent on the table-access

mechanisms defined by the network management protocol in use.

Syntax

IpAddress

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteIfIndex (1.3.6.1.2.1.4.21.1.2)

The index value which uniquely identifies the local interface through which the

next hop of this route should be reached. The interface identified by a particular

value of this index is the same interface as identified by the same value of ifIndex.

Syntax

INTEGER

4-22

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Routing Table

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteMetric1 (1.3.6.1.2.1.4.21.1.3)

The primary routing metric for this route. The semantics of this metric are

determined by the routing protocol specified in the route's ipRouteProto value. If

this metric is not used, its value should be set to -1.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteMetric2 (1.3.6.1.2.1.4.21.1.4)

An alternate routing metric for this route. The semantics of this metric are

determined by the routing protocol specified in the route's ipRouteProto value. If

this metric is not used, its value should be set to -1.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Writes not supported.

59047-09 C

4-23

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Routing Table

ipRouteMetric3 (1.3.6.1.2.1.4.21.1.5)

An alternate routing metric for this route. The semantics of this metric are

determined by the routing protocol specified in the route's ipRouteProto value. If

this metric is not used, its value should be set to -1.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteMetric4 (1.3.6.1.2.1.4.21.1.6)

An alternate routing metric for this route. The semantics of this metric are

determined by the routing protocol specified in the route's ipRouteProto value. If

this metric is not used, its value should be set to -1.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteNextHop (1.3.6.1.2.1.4.21.1.7)

The IP address of the next hop of this route. In the case of a route bound to an

interface which is realized from a broadcast media, the value of this field is the

agent's IP address on that interface.

Syntax

IpAddress

4-24

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Routing Table

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteType (1.3.6.1.2.1.4.21.1.8)

The type of route. The values direct(3) and indirect(4) refer to the notion of direct

and indirect routing in the IP architecture. Setting this object to the value invalid(2)

has the effect of invalidating the corresponding entry in the ipRouteTable object.

That is, it effectively disassociates the destination identified with the entry from the

route identified with the entry. It is an implementation-specific matter as to whether

the agent removes an invalidated entry from the table. Accordingly, management

stations must be prepared to receive tabular information from agents that

corresponds to entries not currently in use. Proper interpretation of such entries

requires examination of the relevant ipRouteType object.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteProto (1.3.6.1.2.1.4.21.1.9)

The routing mechanism through which this route was learned. Inclusion of values

for gateway routing protocols is not intended to imply that hosts should support

those protocols.

Syntax

INTEGER

Access

read-only

59047-09 C

4-25

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Routing Table

Status

mandatory

ipRouteAge (1.3.6.1.2.1.4.21.1.10)

The number of seconds since this route was last updated or otherwise determined

to be correct. No semantics of `too old' can be implied except through knowledge

of the routing protocol by which the route was learned.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteMask (1.3.6.1.2.1.4.21.1.11)

Indicate the mask to be logical-ANDed with the destination address before being

compared to the value in the ipRouteDest field.

Syntax

IpAddress

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteMetric5 (1.3.6.1.2.1.4.21.1.12)

An alternate routing metric for this route. The semantics of this metric are

determined by the routing-protocol specified in the route's ipRouteProto value. If

this metric is not used, its value should be set to -1.

Syntax

INTEGER

4-26

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Address Translation Table

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipRouteInfo (1.3.6.1.2.1.4.21.1.13)

A reference to MIB definitions specific to the particular routing protocol which is

responsible for this route, as determined by the value specified in the route's

ipRouteProto value. If this information is not present, its value should be set to the

OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier. Any

conformant implementation of ASN.1 and BER must be able to generate and

recognize this value.

Syntax

OBJECT IDENTIFIER

Access

read-only

Status

mandatory

The IP Address Translation Table

The IP address translation table contain the IpAddress to`physical' address

equivalences. Some interfaces do not use translation tables for determining

address equivalences (for example, DDN-X.25 has an algorithmic method). If all

interfaces are of this type, then the Address Translation table is empty, that is, has

zero entries.

ipNetToMediaIfIndex (1.3.6.1.2.1.4.22.1.1)

The interface on which this entry's equivalence is effective. The interface

identified by a particular value of this index is the same interface as identified by

the same value of ifIndex.

Syntax

INTEGER

Access

read-write

59047-09 C

4-27

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The IP Address Translation Table

Status

mandatory

Return Value

Writes not supported.

ipNetToMediaPhysAddress (1.3.6.1.2.1.4.22.1.2)

The media-dependent `physical' address.

Syntax

PhysAddress

Access

read-write

Status

mandatory

Return Value

Writes not supported.

ipNetToMediaNetAddress (1.3.6.1.2.1.4.22.1.3)

The IpAddress corresponding to the media-dependent `physical' address.

Syntax

IpAddress

Access

read-write

Status

mandatory

Return Value

Writes not supported.

4-28

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

Additional IP Objects

ipNetToMediaType (1.3.6.1.2.1.4.22.1.4)

The type of mapping. Setting this object to the value invalid(2) has the effect of

invalidating the corresponding entry in the ipNetToMediaTable. That is, it

effectively disassociates the interface identified with the entry from the mapping

identified with the entry. It is an implementation-specific matter as to whether the

agent removes an invalidated entry from the table. Accordingly, management

stations must be prepared to receive tabular information from agents that

corresponds to entries not currently in use. Proper interpretation of such entries

requires examination of the relevant ipNetToMediaType object.

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

Writes not supported.

Additional IP Objects

Following are the additional IP objects.

ipRoutingDiscards (1.3.6.1.2.1.4.23)

The number of routing entries which were chosen to be discarded even though

they are valid. One possible reason for discarding such an entry could be to

free-up buffer space for other routing entries.

Syntax

Counter

Access

read-only

Status

mandatory

59047-09 C

4-29

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The ICMP Group

Implementation of the ICMP group is mandatory for all systems.

icmpInMsgs (1.3.6.1.2.1.5.1)

The total number of ICMP messages received by the entity. This counter includes

all those counted by icmpInErrors.

Syntax

Counter

Access

read-only

Status

mandatory

icmpInErrors (1.3.6.1.2.1.5.2)

The number of ICMP messages received by the entity but were determined as

having ICMP-specific errors (such as, bad ICMP checksums, bad length).

Syntax

Counter

Access

read-only

Status

mandatory

icmpInDestUnreachs (1.3.6.1.2.1.5.3)

The number of ICMP Destination Unreachable messages received.

Syntax

Counter

Access

read-only

Status

mandatory

4-30

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The ICMP Group

icmpInTimeExcds (1.3.6.1.2.1.5.4)

The number of ICMP Time Exceeded messages received.

Syntax

Counter

Access

read-only

Status

mandatory

icmpInParmProbs (1.3.6.1.2.1.5.5)

The number of ICMP Parameter Problem messages received.

Syntax

Counter

Access

read-only

Status

mandatory

icmpInSrcQuenchs (1.3.6.1.2.1.5.6)

The number of ICMP Source Quench messages received.

Syntax

Counter

Access

read-only

Status

mandatory

icmpInRedirects (1.3.6.1.2.1.5.7)

The number of ICMP Redirect messages received.

Syntax

Counter

59047-09 C

4-31

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The ICMP Group

Access

read-only

Status

mandatory

icmpInEchos (1.3.6.1.2.1.5.8)

The number of ICMP Echo (request) messages received.

Syntax

Counter

Access

read-only

Status

mandatory

icmpInEchoReps (1.3.6.1.2.1.5.9)

The number of ICMP Echo Reply messages received.

Syntax

Counter

Access

read-only

Status

mandatory

icmpInTimestamps (1.3.6.1.2.1.5.10)

The number of ICMP Timestamp (request) messages received.

Syntax

Counter

Access

read-only

Status

mandatory

4-32

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The ICMP Group

icmpInTimestampReps (1.3.6.1.2.1.5.11)

The number of ICMP Timestamp Reply messages received.

Syntax

Counter

Access

read-only

Status

mandatory

icmpInAddrMasks (1.3.6.1.2.1.5.12)

The number of ICMP Address Mask Request messages received.

Syntax

Counter

Access

read-only

Status

mandatory

icmpInAddrMaskReps (1.3.6.1.2.1.5.13)

The number of ICMP Address Mask Reply messages received.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutMsgs (1.3.6.1.2.1.5.14)

The total number of ICMP messages which this entity attempted to send. This

counter includes all those counted by icmpOutErrors.

Syntax

Counter

59047-09 C

4-33

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The ICMP Group

Access

read-only

Status

mandatory

icmpOutErrors (1.3.6.1.2.1.5.15)

The number of ICMP messages which this entity did not send due to problems

discovered within ICMP, such as a lack of buffers. This value should not include

errors discovered outside the ICMP layer such as the inability of IP to route the

resultant datagram. In some implementations, there may be no types of errors

which contribute to this counter's value.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutDestUnreachs (1.3.6.1.2.1.5.16)

The number of ICMP Destination Unreachable messages sent.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutTimeExcds (1.3.6.1.2.1.5.17)

The number of ICMP Time Exceeded messages sent.

Syntax

Counter

Access

read-only

4-34

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The ICMP Group

Status

mandatory

icmpOutParmProbs (1.3.6.1.2.1.5.18)

The number of ICMP Parameter Problem messages sent.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutSrcQuenchs (1.3.6.1.2.1.5.19)

The number of ICMP Source Quench messages sent.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutRedirects (1.3.6.1.2.1.5.20)

The number of ICMP Redirect messages sent. For a host, this object will always

be zero, since hosts do not send redirects.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutEchos (1.3.6.1.2.1.5.21)

The number of ICMP Echo (request) messages sent.

59047-09 C

4-35

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The ICMP Group

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutEchoReps (1.3.6.1.2.1.5.22)

The number of ICMP Echo Reply messages sent.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutTimestamps (1.3.6.1.2.1.5.23)

The number of ICMP Timestamp (request) messages sent.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutTimestampReps (1.3.6.1.2.1.5.24)

The number of ICMP Timestamp Reply messages sent.

Syntax

Counter

Access

read-only

4-36

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The TCP Group

Status

mandatory

icmpOutAddrMasks (1.3.6.1.2.1.5.25)

The number of ICMP Address Mask Request messages sent.

Syntax

Counter

Access

read-only

Status

mandatory

icmpOutAddrMaskReps (1.3.6.1.2.1.5.26)

The number of ICMP Address Mask Reply messages sent.

Syntax

Counter

Access

read-only

Status

mandatory

The TCP Group

Implementation of the TCP group is mandatory for all systems that implement the

TCP. Instances of object types that represent information about a particular TCP

connection are transient; they persist only as long as the connection in question.

tcpRtoAlgorithm (1.3.6.1.2.1.6.1)

The algorithm used to determine the timeout value used for retransmitting

unacknowledged octets.

Syntax

INTEGER

Access

read-only

59047-09 C

4-37

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The TCP Group

Status

mandatory

tcpRtoMin (1.3.6.1.2.1.6.2)

The minimum value permitted by a TCP implementation for the retransmission

timeout, measured in milliseconds. More refined semantics for objects of this type

depend upon the algorithm used to determine the retransmission timeout. In

particular, when the timeout algorithm is rsre(3), an object of this type has the

semantics of the LBOUND quantity described in RFC 793.

Syntax

INTEGER

Access

read-only

Status

mandatory

tcpRtoMax (1.3.6.1.2.1.6.3)

The maximum value permitted by a TCP implementation for the retransmission

timeout, measured in milliseconds. More refined semantics for objects of this type

depend upon the algorithm used to determine the retransmission timeout. In

particular, when the timeout algorithm is rsre(3), an object of this type has the

semantics of the UBOUND quantity described in RFC 793.

Syntax

INTEGER

Access

read-only

Status

mandatory

tcpMaxConn (1.3.6.1.2.1.6.4)

The limit on the total number of TCP connections the entity can support. In entities

where the maximum number of connections is dynamic, this object should contain

the value -1.

Syntax

INTEGER

4-38

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The TCP Group

Access

read-only

Status

mandatory

tcpActiveOpens (1.3.6.1.2.1.6.5)

The number of times TCP connections have made a direct transition to the

SYN-SENT state from the CLOSED state.

Syntax

Counter

Access

read-only

Status

mandatory

tcpPassiveOpens (1.3.6.1.2.1.6.6)

The number of times TCP connections have made a direct transition to the

SYN-RCVD state from the LISTEN state.

Syntax

Counter

Access

read-only

Status

mandatory

tcpAttemptFails (1.3.6.1.2.1.6.7)

The number of times TCP connections have made a direct transition to the

CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the

number of times TCP connections have made a direct transition to the LISTEN

state from the SYN-RCVD state.

Syntax

Counter

Access

read-only

59047-09 C

4-39

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The TCP Group

Status

mandatory

tcpEstabResets (1.3.6.1.2.1.6.8)

The number of times TCP connections have made a direct transition to the

CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.

Syntax

Counter

Access

read-only

Status

mandatory

tcpCurrEstab (1.3.6.1.2.1.6.9)

The number of TCP connections for which the current state is either

ESTABLISHED or CLOSE-WAIT.

Syntax

Gauge

Access

read-only

Status

mandatory

tcpInSegs (1.3.6.1.2.1.6.10)

The total number of segments received, including those received in error. This

count includes segments received on currently established connections.

Syntax

Counter

Access

read-only

Status

mandatory

4-40

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The TCP Connection Table

tcpOutSegs (1.3.6.1.2.1.6.11)

The total number of segments sent including those on current connections, but

excluding those containing only retransmitted octets.

Syntax

Counter

Access

read-only

Status

mandatory

tcpRetransSegs (1.3.6.1.2.1.6.12)

The total number of segments retransmitted. That is, the number of TCP

segments transmitted containing one or more previously transmitted octets.

Syntax

Counter

Access

read-only

Status

mandatory

The TCP Connection Table

The TCP connection table contains information about this entity's existing TCP

connections.

tcpConnState (1.3.6.1.2.1.6.13.1.1)

The state of this TCP connection. The only value which may be set by a

management station is deleteTCB(12). Accordingly, it is appropriate for an agent

to return a “badValue” response if a management station attempts to set this

object to any other value.

If a management station sets this object to the value deleteTCB(12), then this has

the effect of deleting the TCB (as defined in RFC 793) of the corresponding

connection on the managed Node. The result is an immediate termination of the

connection.

Syntax

INTEGER

59047-09 C

4-41

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The TCP Connection Table

Access

read-write

Status

mandatory

Return Value

Writes not supported.

tcpConnLocalAddress (1.3.6.1.2.1.6.13.1.2)

The local IP address for this TCP connection. In the case of a connection in the

listen state which is willing to accept connections for any IP interface associated

with the Node, the value 0.0.0.0 is used.

Syntax

IpAddress

Access

read-only

Status

mandatory

tcpConnLocalPort (1.3.6.1.2.1.6.13.1.3)

The local port number for this TCP connection.

Syntax

INTEGER (0..65535)

Access

read-only

Status

mandatory

tcpConnRemAddress (1.3.6.1.2.1.6.13.1.4)

The remote IP address for this TCP connection.

Syntax

IpAddress

Access

read-only

4-42

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

Additional TCP Objects

Status

mandatory

tcpConnRemPort (1.3.6.1.2.1.6.13.1.5)

The remote port number for this TCP connection.

Syntax

INTEGER (0..65535)

Access

read-only

Status

mandatory

Additional TCP Objects

Following are the additional TCP objects.

tcpInErrs (1.3.6.1.2.1.6.14)

The total number of segments received in error (for example, bad TCP

checksums).

Syntax

Counter

Access

read-only

Status

mandatory

tcpOutRsts (1.3.6.1.2.1.6.15)

The number of TCP segments sent containing the RST flag.

Syntax

Counter

Access

read-only

Status

mandatory

59047-09 C

4-43

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The UDP Group

Implementation of the UDP group is mandatory for all systems which implement

the UDP.

udpInDatagrams (1.3.6.1.2.1.7.1)

The total number of UDP datagrams delivered to UDP users.

Syntax

Counter

Access

read-only

Status

mandatory

udpNoPorts (1.3.6.1.2.1.7.2)

The total number of received UDP datagrams for which there was no application

at the destination port.

Syntax

Counter

Access

read-only

Status

mandatory

udpInErrors (1.3.6.1.2.1.7.3)

The number of received UDP datagrams that could not be delivered for reasons

other than the lack of an application at the destination port.

Syntax

Counter

Access

read-only

Status

mandatory

4-44

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The UDP Listener Table

udpOutDatagrams (1.3.6.1.2.1.7.4)

The total number of UDP datagrams sent from this entity.

Syntax

Counter

Access

read-only

Status

mandatory

The UDP Listener Table

The UDP listener table contains information about this entity's UDP end-points on

which a local application is currently accepting datagrams.

udpLocalAddress (1.3.6.1.2.1.7.5.1.1)

The local IP address for this UDP listener. In the case of a UDP listener which is

willing to accept datagrams for any IP interface associated with the Node, the

value 0.0.0.0 is used.

Syntax

IpAddress

Access

read-only

Status

mandatory

udpLocalPort (1.3.6.1.2.1.7.5.1.2)

The local port number for this UDP listener.

Syntax

INTEGER (0..65535)

Access

read-only

Status

mandatory

59047-09 C

4-45

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The EGP Group

Implementation of the EGP group is mandatory for all systems which implement

the EGP.

egpInMsgs (1.3.6.1.2.1.8.1)

The number of EGP messages received without error.

Syntax

Counter

Access

read-only

Status

mandatory

egpInErrors (1.3.6.1.2.1.8.2)

The number of EGP messages received that proved to be in error.

Syntax

Counter

Access

read-only

Status

mandatory

egpOutMsgs (1.3.6.1.2.1.8.3)

The total number of locally generated EGP messages.

Syntax

Counter

Access

read-only

Status

mandatory

4-46

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The EGP Neighbor Table

egpOutErrors (1.3.6.1.2.1.8.4)

The number of locally generated EGP messages not sent due to resource

limitations within an EGP entity.

Syntax

Counter

Access

read-only

Status

mandatory

The EGP Neighbor Table

The EGP neighbor table contains information about this entity's EGP neighbors.

egpNeighState (1.3.6.1.2.1.8.5.1.1)

The EGP state of the local system with respect to this entry's EGP neighbor. Each

EGP state is represented by a value that is one greater than the numerical value

associated with the state in RFC 904.

Syntax

INTEGER

Access

read-only

Status

mandatory

egpNeighAddr (1.3.6.1.2.1.8.5.1.2)

The IP address of this entry's EGP neighbor.

Syntax

IpAddress

Access

read-only

Status

mandatory

59047-09 C

4-47

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The EGP Neighbor Table

egpNeighAs (1.3.6.1.2.1.8.5.1.3)

The autonomous system of this EGP peer. Zero should be specified if the

autonomous system number of the neighbor is not yet known.

Syntax

INTEGER

Access

read-only

Status

mandatory

egpNeighInMsgs (1.3.6.1.2.1.8.5.1.4)

The number of EGP messages received without error from this EGP peer.

Syntax

Counter

Access

read-only

Status

mandatory

egpNeighInErrs (1.3.6.1.2.1.8.5.1.5)

The number of EGP messages received from this EGP peer that proved to be in

error (for example, bad EGP checksum).

Syntax

Counter

Access

read-only

Status

mandatory

egpNeighOutMsgs (1.3.6.1.2.1.8.5.1.6)

The number of locally generated EGP messages to this EGP peer.

Syntax

Counter

4-48

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The EGP Neighbor Table

Access

read-only

Status

mandatory

egpNeighOutErrs (1.3.6.1.2.1.8.5.1.7)

The number of locally generated EGP messages not sent to this EGP peer due to

resource limitations within an EGP entity.

Syntax

Counter

Access

read-only

Status

mandatory

egpNeighInErrMsgs (1.3.6.1.2.1.8.5.1.8)

The number of EGP-defined error messages received from this EGP peer.

Syntax

Counter

Access

read-only

Status

mandatory

egpNeighOutErrMsgs (1.3.6.1.2.1.8.5.1.9)

The number of EGP-defined error messages sent to this EGP peer.

Syntax

Counter

Access

read-only

Status

mandatory

59047-09 C

4-49

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The EGP Neighbor Table

egpNeighStateUps (1.3.6.1.2.1.8.5.1.10)

The number of EGP state transitions to the UP state with this EGP peer.

Syntax

Counter

Access

read-only

Status

mandatory

egpNeighStateDowns (1.3.6.1.2.1.8.5.1.11)

The number of EGP state transitions from the UP state to any other state with this

EGP peer.

Syntax

Counter

Access

read-only

Status

mandatory

egpNeighIntervalHello (1.3.6.1.2.1.8.5.1.12)

The interval between EGP Hello command retransmissions, in hundredths of a

second. This represents the t1 timer as defined in RFC 904.

Syntax

INTEGER

Access

read-only

Status

mandatory

egpNeighIntervalPoll (1.3.6.1.2.1.8.5.1.13)

The interval between EGP poll command retransmissions, in hundredths of a

second. This represents the t3 timer as defined in RFC 904.

4-50

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The EGP Neighbor Table

Syntax

INTEGER

Access

read-only

Status

mandatory

egpNeighMode (1.3.6.1.2.1.8.5.1.14)

The polling mode of this EGP entity, either passive or active.

Syntax

INTEGER { active(1), passive(2) }

Access

read-only

Status

mandatory

egpNeighEventTrigger (1.3.6.1.2.1.8.5.1.15)

A control variable used to trigger operator-initiated Start and Stop events. When

read, this variable always returns the most recent value that

egpNeighEventTrigger was set to. If it has not been set since the last initialization

of the network management subsystem on the Node, it returns a value of “stop”.

When set, this variable causes a Start or Stop event on the specified neighbor, as

specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to

begin neighbor acquisition and a non-Idle peer to re-initiate neighbor acquisition.

A stop event causes a non-Idle peer to return to the Idle state until a Start event

occurs, either by egpNeighEventTrigger or otherwise.

Syntax

INTEGER { start(1), stop(2) }

Access

read-write

Status

mandatory

59047-09 C

4-51

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The Transmission Group

egpAs (1.3.6.1.2.1.8.6)

The autonomous system number of this EGP entity.

Syntax

INTEGER

Access

read-only

Status

mandatory

The Transmission Group

Based on the transmission media underlying each interface on a system, the

corresponding portion of the Transmission group is mandatory for that system.

When Internet-standard definitions for managing transmission media are defined,

the transmission group is used to provide a prefix for the names of those objects.

Typically, such definitions reside in the experimental portion of the MIB until they

are "proven", then as a part of the Internet standardization process, the definitions

are accordingly elevated and a new object identifier, under the transmission group

is defined. By convention, the name assigned is:

type OBJECT IDENTIFIER ::= { transmission number }.

Where "type" is the symbolic value used for the media in the ifType column of the

ifTable object, and "number" is the actual integer value corresponding to the

symbol.

The SNMP Group

Implementation of the SNMP group is mandatory for all systems which support an

SNMP protocol entity. Some of the objects defined below will be zero-valued in

those SNMP implementations that are optimized to support only those functions

specific to either a management agent or a management station. In particular, it

should be observed that the objects below refer to an SNMP entity, and there may

be several SNMP entities residing on a managed Node.

snmpInPkts (1.3.6.1.2.1.11.1)

The total number of messages delivered to the SNMP entity from the transport

service.

Syntax

Counter

4-52

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

Access

read-only

Status

mandatory

snmpOutPkts (1.3.6.1.2.1.11.2)

The total number of SNMP messages passed from the SNMP protocol entity to

the transport service.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInBadVersions (1.3.6.1.2.1.11.3)

The total number of SNMP messages delivered to the SNMP protocol entity and

were for an unsupported SNMP version.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInBadCommunityNames (1.3.6.1.2.1.11.4)

The total number of SNMP messages delivered to the SNMP protocol entity which

used a SNMP community name not known to the entity.

Syntax

Counter

Access

read-only

59047-09 C

4-53

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

Status

mandatory

snmpInBadCommunityUses (1.3.6.1.2.1.11.5)

The total number of SNMP messages delivered to the SNMP protocol entity which

represented an SNMP operation which was not allowed by the SNMP community

named in the message.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInASNParseErrs (1.3.6.1.2.1.11.6)

The total number of ASN.1 or BER errors encountered by the SNMP protocol

entity when decoding received SNMP messages.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInTooBigs (1.3.6.1.2.1.11.8)

The total number of SNMP PDUs delivered to the SNMP protocol entity and for

which the value of the error-status field is “tooBig”.

Syntax

Counter

Access

read-only

Status

mandatory

4-54

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

snmpInNoSuchNames (1.3.6.1.2.1.11.9)

The total number of SNMP PDUs delivered to the SNMP protocol entity and for

which the value of the error-status field is "NoSuchName".

Syntax

Counter

Access

read-only

Status

mandatory

snmpInBadValues (1.3.6.1.2.1.11.10)

The total number of SNMP PDUs delivered to the SNMP protocol entity and for

which the value of the error-status field is “badValue”.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInReadOnlys (1.3.6.1.2.1.11.11)

The total number valid SNMP PDUs delivered to the SNMP protocol entity and for

which the value of the error-status field is “readOnly”. It should be noted that it is a

protocol error to generate an SNMP PDU which contains the value ”readOnly” in

the error-status field, as such, this object is provided as a means of detecting

incorrect implementations of the SNMP.

Syntax

Counter

Access

read-only

Status

mandatory

59047-09 C

4-55

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

snmpInGenErrs (1.3.6.1.2.1.11.12)

The total number of SNMP PDUs delivered to the SNMP protocol entity and for

which the value of the error-status field is “genErr”.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInTotalReqVars (1.3.6.1.2.1.11.13)

The total number of MIB objects retrieved successfully by the SNMP protocol

entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInTotalSetVars (1.3.6.1.2.1.11.14)

The total number of MIB objects altered successfully by the SNMP protocol entity

as the result of receiving valid SNMP Set-Request PDUs.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInGetRequests (1.3.6.1.2.1.11.15)

The total number of SNMP Get-Request PDUs accepted and processed by the

SNMP protocol entity.

4-56

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

Syntax

Counter

Access

read-only

Status

mandatory

snmpInGetNexts (1.3.6.1.2.1.11.16)

The total number of SNMP Get-Next PDUs accepted and processed by the SNMP

protocol entity.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInSetRequests (1.3.6.1.2.1.11.17)

The total number of SNMP Set-Request PDUs accepted and processed by the

SNMP protocol entity.

Syntax

Counter

Access

read-only

Status

mandatory

snmpInGetResponses (1.3.6.1.2.1.11.18)

The total number of SNMP Get-Response PDUs accepted and processed by the

SNMP protocol entity.

Syntax

Counter

59047-09 C

4-57

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

Access

read-only

Status

mandatory

snmpInTraps (1.3.6.1.2.1.11.19)

The total number of SNMP Trap PDUs accepted and processed by the SNMP

protocol entity.

Syntax

Counter

Access

read-only

Status

mandatory

snmpOutTooBigs (1.3.6.1.2.1.11.20)

The total number of SNMP PDUs generated by the SNMP protocol entity and for

which the value of the error-status field is “tooBig”'

Syntax

Counter

Access

read-only

Status

mandatory

snmpOutNoSuchNames (1.3.6.1.2.1.11.21)

The total number of SNMP PDUs generated by the SNMP protocol entity and for

which the value of the error-status is "NoSuchName".

Syntax

Counter

Access

read-only

4-58

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

Status

mandatory

snmpOutBadValues (1.3.6.1.2.1.11.22)

The total number of SNMP PDUs generated by the SNMP protocol entity and for

which the value of the error-status field is “badValue”.

Syntax

Counter

Access

read-only

Status

mandatory

snmpOutGenErrs (1.3.6.1.2.1.11.24)

The total number of SNMP PDUs generated by the SNMP protocol entity and for

which the value of the error-status field is “genErr”.

Syntax

Counter

Access

read-only

Status

mandatory

snmpOutGetRequests (1.3.6.1.2.1.11.25)

The total number of SNMP Get-Request PDUs generated by the SNMP protocol

entity.

Syntax

Counter

Access

read-only

Status

mandatory

59047-09 C

4-59

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

snmpOutGetNexts (1.3.6.1.2.1.11.26)

The total number of SNMP Get-Next PDUs generated by the SNMP protocol

entity.

Syntax

Counter

Access

read-only

Status

mandatory

snmpOutSetRequests (1.3.6.1.2.1.11.27)

The total number of SNMP Set-Request PDUs generated by the SNMP protocol

entity.

Syntax

Counter

Access

read-only

Status

mandatory

snmpOutGetResponses (1.3.6.1.2.1.11.28)

The total number of SNMP Get-Response PDUs generated by the SNMP protocol

entity.

Syntax

Counter

Access

read-only

Status

mandatory

snmpOutTraps (1.3.6.1.2.1.11.29)

The total number of SNMP Trap PDUs generated by the SNMP protocol entity.

4-60

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

Syntax

Counter

Access

read-only

Status

mandatory

snmpEnableAuthenTraps (1.3.6.1.2.1.11.30)

Indicates whether the SNMP agent process is permitted to generate

authentication-failure traps. The value of this object overrides any configuration

information; as such, it provides a means whereby all authentication-failure traps

may be disabled.

It is strongly recommended that this object be stored in non-volatile memory so

that it remains constant between re-initializations of the network management

system.

Syntax

INTEGER { enabled(1), disabled(2) }

Access

read-write

Status

mandatory

Return Value

Read returns enabled (1) if AuthFailureTrap = True, otherwise disabled (2).

Writes not supported.

59047-09 C

4-61

Download from Www.Somanuals.com. All Manuals Search And Download.

4 – MIB-II Objects

The SNMP Group

Notes

4-62

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Fibre Alliance MIB Objects

This section covers the implementation details for the Fibre Alliance Management

Information Bases (FA-MIB) version 6.0 on the SANbox switch.

FA MIB Definitions

The FA-MIB version 4.0 is a collection of structured objects that resides on the

workstation with the manager application. These objects define the syntax for

information exchanged between the manager and the agent. The textual

substitutions in T a ble 5-1 are specific to the FA-MIB and can be used in place of

primitive data types.

Table 5-1. FA-MIB Textual Substitutions

Description

Syntax

FcNameId

FcGlobalId

FcAddressId

OCTET STRING (SIZE(8))

OCTET STRING (SIZE(16))

OCTET STRING (SIZE(3))

FcEventSeverity INTEGER {

unknown (1),

emergency (2),

alert (3),

critical (4),

error (5),

warning (6),

notify (7),

info (8),

debug (9),

mark (10) - All messages logged

}

59047-09 C

5-1

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

FA MIB Definitions

Table 5-1. FA-MIB Textual Substitutions (Continued)

Description

Syntax

FcUnitType

INTEGER {

unknown(1)

other(2) - none of the following

hub(3) - passive connectivity unit supporting loop protocol.

switch(4) - active connectivity unit supporting multiple protocols.

gateway(5) - unit that converts not only the interface but also

encapsulates the frame into another protocol. The assumption is

that there is always two gateways connected together. For exam-

ple, FC <-> ATM.

converter(6) - unit that converts from one interface to another. For

example, FC <-> SCSI.

hba(7) - host bus adapter

proxy-agent(8) - software proxy-agent

storage-device(9) - disk, cd, tape, etc.

host(10) - host computer

storage-subsystem(11) - raid, library, etc.

module(12) - subcomponent of a system

swdriver(13) - software driver

storage-access-device(14) - Provides storage management and

access for heterogeneous hosts and heterogeneous devices

wdm(15) - waveform division multiplexer

ups(16) - uninterruptable power supply

}

revisionNumber

The revision number for this MIB. The format of the revision value is as follows:

„

(0) = high order major revision number

(1) = low order major revision number

(2) = high order minor revision number

(3) = low order minor revision number

The value will be stored as an ASCII value. The following is the current value of

04.00 for this object.

„

(0) = '0'

(1) = '4'

5-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Unit Group

„

(2) = '0'

(3) = '0'

Syntax

DisplayString (SIZE (4))

Access

read-only

Status

mandatory

Return Value

A four digit ASCII value (for example, 0400 for MIB revision 4.0).

Connectivity Unit Group

The objects described in this section are not in a table format. An example of how

to access one of these objects is:

"snmpget localhost public fcmgmt.connSet.uNumber.0".

uNumber (1.3.6.1.3.94.1.1)

The number of connectivity units present on this system (represented by this

agent). May be a count of the boards in a chassis or the number of full boxes in a

rack.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

The number of switches in fabric.

systemURL (1.3.6.1.3.94.1.2)

The top-level URL of the system. If it does not exist, the value is an empty string.

The URL format is implementation dependant and can have keywords embedded

that are preceded by a percent sign (for example, %USER).

59047-09 C

5-3

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Unit Group

Syntax

DisplayString

Access

read-write

Status

mandatory

Return Value

The switch IP address. For example, http://10.0.0.1. Writes not supported,

returns 'NoSuchName".

statusChangeTime (1.3.6.1.3.94.1.3)

The sysUpTime timestamp at which the last status change occurred for any

members of the set, in centiseconds.

Syntax

TimeTicks

Access

read only

Status

obsolete

Return Value

The sysUpTime timestamp at which the last status change occurred.

configurationChangeTime (1.3.6.1.3.94.1.4)

The sysUpTime timestamp at which the last configuration change occurred for

any members of the set, in centiseconds. This represents a union of change

information for connUnitConfigurationChangeTime.

Syntax

TimeTicks

Access

read only

Status

obsolete

5-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Return Value

The sysUpTime timestamp at which the last configuration change occurred.

connUnitTableChangeTime (1.3.6.1.3.94.1.5)

The sysUpTime timestamp at which the connUnitTable was updated (an entry was

either added or deleted), in centiseconds.

Syntax

TimeTicks

Access

read only

Status

obsolete

Return Value

The sysUpTime timestamp at which the connUnitTable was updated.

Connectivity Table

The objects described in this section are in a table format indexed by switch World

Wide Name. An example of how to access one of these objects given a WWN of

100000c0dd0090a7 is:

"snmpget localhost public

fcmgmt.connSet.connUnitTable.connUnitEntry.connUnitId..16.0.0.192.

221.0.144.167.0.0.0.0.0.0.0.0".

connUnitId (1.3.6.1.3.94.1.6.1.1)

The unique identification for this connectivity unit among those within this proxy

domain. The value must be unique within the proxy domain because it is the index

variable for connUnitTable. The value assigned to a given connectivity unit should

be persistent across agent and unit resets. It should be the same as

connUnitGlobalId if connUnitGlobalId is known and stable.

Syntax

FcGlobalId

Access

read-only

59047-09 C

5-5

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Status

mandatory

Return Value

The World Wide Name of the switch followed by 8 bytes of zeros. For

example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitGlobalId (1.3.6.1.3.94.1.6.1.2)

An optional global-scope identifier for this connectivity unit. It must be a WWN for

this connectivity unit or 16 octets of value zero.

Syntax

connUnitGlobalId

Access

read-only

Status

mandatory

Return Value

The World Wide Name of the switch followed by 8 bytes of zeros. For

example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitType (1.3.6.1.3.94.1.6.1.3)

The type of this connectivity unit.

Syntax

FcUnitType

Access

read-only

Status

mandatory

Return Value

switch (4)

connUnitNumports (1.3.6.1.3.94.1.6.1.4)

Number of physical ports in the connectivity unit (internal/embedded, external).

5-6

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

The number of ports on the switch.

connUnitState (1.3.6.1.3.94.1.6.1.5)

The operational state of the switch mapped. The overall state of connectivity unit.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-2 for switch operational states.

Table 5-2. Switch Operational States

Switch State

Return State

online

online (2)

offline (3)

unknown (1)

offline

diagnostics

other

connUnitStatus (1.3.6.1.3.94.1.6.1.6)

Overall status of the connectivity unit. The goal of this object is to be the single

poll point to check the status of the connunit. If there is any other component that

has warning, then this should be set to warning. any of these values may occur

with any of the ConnUnitState values.

59047-09 C

5-7

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-3 for connectivity unit return values. Return value will be OK

(3), unless one or more of the following occurs.

Table 5-3. SANbox 5000 Series Connectivity Unit Return Values

Status

Return Value

If one power supply is reporting Bad

and/or not installed

warning (4)

failed (5)

If both power supplies are reporting Bad

and/or not installed

If one or more cooling fan failed

If all cooling fans failed

warning (4)

failed (5)

If temperature status = "Warm"

If temperature status = "Overheating"

If any port down

warning (4)

failed (5)

warning (4)

failed (5)

If POST failed

If switch Offline or in Diagnostics mode

warning (4)

Refer to T a ble 5-4 for connectivity unit return values. Return value will be OK

(3), uninstalled IO or CPU boards are ignored

Table 5-4. SANbox 9000 Series Connectivity Unit Return Values

Status

Return Value

If either FAN or PS boards are not installed warning (4)

If all FANs or all PS boards are not

installed

failed (5)

5-8

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Table 5-4. SANbox 9000 Series Connectivity Unit Return Values

Status

Return Value

If installed board's faultList is not NONE

warning (4)

connUnitProduct (1.3.6.1.3.94.1.6.1.7)

The sml attribute Config.Snmp.SysDescr. This is the system description shown on

the 'show version' telnet screen. It can also be read on the 'show setup snmp'

screen and written using the 'set setup snmp' Telnet screen.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

Returns the switch SystemDescription: SANbox 5200 = SANbox 5200 FC

Switch, SANbox 5202 = SANbox 5602 FC Switch, SANbox 5600 = SANbox

5600 FC Switch, SANbox 5602 = SANbox 5602 FC Switch, SANbox 9100 =

SANbox 9100 FC Switch, SANbox 9200 = SANbox 9200 FC Switch.

connUnitSn (1.3.6.1.3.94.1.6.1.8)

The serial number for this connectivity unit.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

The chassis serial number.

connUnitUpTime (1.3.6.1.3.94.1.6.1.9)

The number of centiseconds since the last unit initialization.

59047-09 C

5-9

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Syntax

TimeTicks

Access

read-only

Status

mandatory

Return Value

The time interval since either POST or a reset (not including hotreset

command for the NDCLA feature). POST (Power-On Self-Test) occurs

during Power-On, or hardreset.

connUnitUrl (1.3.6.1.3.94.1.6.1.10)

URL to launch a management application, if applicable. Otherwise, it’s an empty

string. In a standalone unit, this would be the same as the top-level URL. This has

the same definition as systemURL for keywords. If write is not supported, then the

return value is invalid. This value will be retained across boots.

Syntax

DisplayString

Access

read-write

Status

mandatory

Return Value

The switch IP address. For example, http://10.0.0.1. Writes not supported,

returns 'NoSuchName".

connUnitDomainId (1.3.6.1.3.94.1.6.1.11

24 bit Fibre Channel address ID of this connectivity unit, right justified with leading

zeros if required. This should be set to the Fibre Channel address ID, or if it is a

switch, it would be set to the Domain Controller address. If this value is not

applicable, return all bits set to one.

Syntax

OCTET STRING (SIZE(3))

5-10

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Access

read-only

Status

mandatory

Return Value

The domain controller address. For example, FF FC 65.

connUnitProxyMaster (1.3.6.1.3.94.1.6.1.12)

A value of “yes” means this is the proxy master unit for a set of managed units.

For example, this could be the only unit with a management card in it for a set of

units. A standalone unit should return “yes” for this object.

Syntax

INTEGER {

unknown(1),

no(2),

yes(3)

}

Access

read-only

Status

mandatory

Return Value

If out-of-band switch, returns yes (3). If in-band switch, returns no (2).

59047-09 C

5-11

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

connUnitPrincipal (1.3.6.1.3.94.1.6.1.13)

Whether this connectivity unit is the principal unit within the group of fabric

elements. If this value is not applicable, the return is unknown.

Syntax

INTEGER {

unknown(1),

no(2),

yes(3)

}

Access

read-only

Status

mandatory

Return Value

For the principal switch, returns yes (3); otherwise returns no (2).

connUnitNumSensors (1.3.6.1.3.94.1.6.1.14)

Number of sensors in the connUnitSensorTable elements. If this value is not

applicable, return unknown.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Returns the number of sensors listed in the connUnitSensorTable. SANbox

5200 = 3, SANbox 5202 = 6, SANbox 5600 = 3, SANbox 5602 = 6, SANbox

9000 Series is dependent on number of blades installed

5-12

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

connUnitStatusChangeTime (1.3.6.1.3.94.1.6.1.15)

The sysUpTime timestamp, in centiseconds, at which the last status change

occurred.

Syntax

TimeTicks

Access

read-only

Status

obsolete

Return Value

This object is obsolete. Always returns error status "NoSuchName".

connUnitConfigurationChangeTime (1.3.6.1.3.94.1.6.1.16)

The sysUpTime timestamp, in centiseconds, at which the last configuration

change occurred.

Syntax

TimeTicks

Access

read-only

Status

obsolete

Return Value

This object is obsolete. Always returns error status "NoSuchName".

59047-09 C

5-13

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

connUnitNumRevs (1.3.6.1.3.94.1.6.1.17)

The number of revisions in the connUnitRevsTable.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

The number of entries in the revision table. The revision numbers of all

components of the switch. SANbox 5200 = 3, SANbox 5202 = 3, SANbox

5600 = 3, SANbox 5602 = 3, SANbox 9000 Series is dependent on number

of blades installed

connUnitNumZones (1.3.6.1.3.94.1.6.1.18)

Number of zones defined in connUnitZoneTable.

Syntax

INTEGER

Access

read-only

Status

obsolete

Return Value

This object is obsolete. Always returns error status "NoSuchName".

5-14

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

connUnitModuleId (1.3.6.1.3.94.1.6.1.19)

This is a unique ID, persistent between boots, that can be used to group a set of

connUnits together into a module. The intended use would be to create a

connUnit with a connUnitType of “module” to represent a physical or logical group

of connectivity units. Then, the value of the group would be set to the value of

connUnitId for this “container” connUnit. connUnitModuleId should be zeros if this

connUnit is not part of a module.

Syntax

FcGlobalId

Access

read-only

Status

mandatory

Return Value

The World Wide Name of the switch followed by 8 bytes of zeros. For

example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitName (1.3.6.1.3.94.1.6.1.20)

A display string containing a name for this connectivity unit. This object value

should be persistent between boots.

Syntax

DisplayString (SIZE(0..79))

Access

read-write

Status

mandatory

Return Value

The SymbolicName of Switch. The default's are: SANbox 5200 = SANbox,

SANbox 5202 = SANbox, SANbox 5600 = SANbox, SANbox 5602 =

SANbox, SANbox 9100 = SANbox, SANbox 9200 = SANbox

59047-09 C

5-15

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

connUnitInfo (1.3.6.1.3.94.1.6.1.21)

A display string containing information about this connectivity unit. This object

value should be persistent between boots.

Syntax

DisplayString

Access

read-write

Status

mandatory

Return Value

Returns the ConfigDescription field for the switch. The default for SANbox

5000/9000 Series = Default Config.

connUnitControl (1.3.6.1.3.94.1.6.1.22)

This object is used to control the addressed connUnit. “Cold Start” and “Warm

Start” are as defined in MIB-II and are not meant to be a factory reset.

„

resetConnUnitColdStart: the addressed unit performs a “Cold Start” reset.

resetConnUnitWarmStart: the addressed unit performs a “Warm Start” reset.

offlineConnUnit: the addressed unit puts itself into an implementation

dependant “offline” state. In general, if a unit is in an offline state, it cannot

be used to perform meaningful Fibre Channel work.

„

onlineConnUnit: the addressed unit puts itself into an implementation

dependant “online” state. In general, if a unit is in an online state, it is

capable of performing meaningful Fibre Channel work.

Each implementation may chose not to allow any or all of these values on a SET.

Syntax

INTEGER {

unknown(1),

invalid(2),

resetConnUnitColdStart(3),

resetConnUnitWarmStart(4),

offlineConnUnit(5),

onlineConnUnit(6)

}

5-16

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Access

read-write

Status

mandatory

Return Value

Refer to the following tables for connUnitControl values.

Table 5-5. connUnitContol Read Return Values

Switch Setting Return Value

Online

Online (6)

Offline (5)

Unknown (1)

Offline

Diagnostics

Other

Table 5-6. connUnitContol Write Control Values

Control Value Result

Cold Reset (3)

Offline (5)

Online (6)

other

Reset

Offline

Online

Not supported

connUnitContact (1.3.6.1.3.94.1.6.1.23)

Contact information for this connectivity unit, and is persistent across boots.

Syntax

DisplayString (SIZE (0..79))

Access

read-write

Status

mandatory

59047-09 C

5-17

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Return Value

The default is: <sysContact undefined>. The string size is limited to a

maximum of 64.

connUnitLocation (1.3.6.1.3.94.1.6.1.24)

Location information for this connectivity unit, and is persistent across boots.

Syntax

DisplayString (SIZE (0..79))

Access

read-write

Status

mandatory

Return Value

The default is: <sysLocation undefined>. The string size is limited to a

maximum of 64.

connUnitEventFilter (1.3.6.1.3.94.1.6.1.25)

This value defines the event severity that will be logged by this connectivity unit.

All events of severity less than or equal to connUnitEventFilter are logged in

connUnitEventTable.

Syntax

FcEventSeverity

Access

read-write

Status

mandatory

Return Value

The switch log level setting. Refer to the following tables for

connUnitEventFilter values.

Table 5-7. connUnitEventFilter Read Return Values

Severity Levels

Return Value

Critical

Critical (4)

5-18

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

Table 5-7. connUnitEventFilter Read Return Values

Severity Levels Return Value

Warn

Info

Warning (6)

Info (8)

None

Unknown (1)

Table 5-8. connUnitEventFilter Control Write Values

Control Value Result

Emergency (2)

Alert (3)

Critical

Warn

Info

Critical (4)

Error (5)

Warning (6)

Notify (7)

Info (8)

Info

Debug (9)

Mark (10)

Unknown (1)

Info

None

connUnitNumEvents (1.3.6.1.3.94.1.6.1.26)

Number of events currently in the connUnitEventTable.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

An integer indicating the number of events in the event table.

59047-09 C

5-19

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Connectivity Table

connUnitMaxEvents (1.3.6.1.3.94.1.6.1.27)

Maximum number of events that can be defined in connUnitEventTable.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Always returns 30.

connUnitEventCurrID (1.3.6.1.3.94.1.6.1.28)

The last used event ID (connUnitEventIndex).

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

The event ID of the last event.

connUnitFabricID (1.3.6.1.3.94.1.6.1.29)

A globally unique value to identify the fabric that this ConnUnit belongs to,

otherwise empty string. This would typically be equal to the connUnitGlobalID of

the primary switch in a Fibre Channel fabric.

Syntax

FcGlobalId

MaxAccess

read-only

Status

mandatory

5-20

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Revision Table

Return Value

Returns the World Wide Name of the principal switch followed by 8 bytes of

zeros. For example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitNumLinks (1.3.6.1.3.94.1.6.1.30)

The number of links in the link table.

Syntax

INTEGER

MaxAccess

read-only

Status

mandatory

Return Value

Returns the number of link table entries for each switch.

connUnitVendorId (1.3.6.1.3.94.1.6.1.31)

The connectivity unit vendor's name.

Syntax

DisplayString (SIZE (0..79))

read-only

Status

mandatory

Return Value

"QLogic"

Revision Table

The objects described in this section are in a table format indexed by World Wide

Name and Index. The Table of revisions for hardware and software elements.

There are four revision items in each switch. An example of how to access one of

these objects given a WWN of 100000c0dd0090a7 is:

"snmpget localhost public

fcmgmt.connSet.connUnitRevsTable.connUnitRevsEntry.connUnitRevsUni

tId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1".

59047-09 C

5-21

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Revision Table

The number of entries in this table will be variable depending on which platform is

being examined and the number of blades installed. SNMP first reports the

firmware revision and flasher shell version. It then iterates through each of the

installed blades reporting the PCB revision and ASIC version.

connUnitRevsUnitId (1.3.6.1.3.94.1.7.1.1)

The connUnitId of the connectivity unit that contains this revision table.

Syntax

FcGlobalId

Access

read-only

Status

mandatory

Return Value

Returns the World Wide Name of the switch followed by 8 bytes of zeros.

For example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitRevsIndex (1.3.6.1.3.94.1.7.1.2)

A unique value among all connUnitRevsEntrys with the same value of

connUnitRevsUnitId, in the range between 1 and

connUnitNumRevs[connUnitRevsUnitId].

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

The revision table index.

connUnitRevsRevId (1.3.6.1.3.94.1.7.1.3)

A vendor-specific string identifying a revision of a component of the connUnit

indexed by connUnitRevsUnitId.

Syntax

DisplayString

5-22

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Revision Table

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-9 for SANbox 5000/9000 Series connUnitRevsRevtId return

values.

Table 5-9. SANbox 5000/9000 Series ConnUnitRevsRevId Return Values

Table Index

Return Value

Active Firmware Image

Flasher Shell Version

Hardware ASIC Version (1 per blade)

connUnitRevsDescription (1.3.6.1.3.94.1.7.1.4)

Description of a component to which the revision corresponds.

Syntax

DisplayString

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-10 for SANbox 5200/5600 Series connUnitRevsDescription

return values.

Table 5-10. SANbox 5200/5600 Series ConnUnitRevsDescription Return

Values

Table Index

Return Value

Active Firmware Version

Flasher Shell Version

59047-09 C

5-23

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Sensor Table

Table 5-10. SANbox 5200/5600 Series ConnUnitRevsDescription Return

Values

Table Index

Return Value

Hardware ASIC Version

Sensor Table

The objects described in this section are in a table format indexed by World Wide

Name and Index. The Index is the sensor number being interrogated. There are

six sensor items in each switch. An example of how to access one of these

objects given a WWN of 100000c0dd0090a7 is:

"snmpget localhost public

fcmgmt.connSet.connUnitSensorTable.connUnitSensorEntry.connUnitSen

sorUnitId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1".

connUnitSensorUnitId (1.3.6.1.3.94.1.8.1.1)

The connUnitId of the connectivity unit that contains this sensor table.

Syntax

FcGlobalId

Access

read-only

Status

mandatory

Return Value

Returns the World Wide Name of the switch followed by 8 bytes of zeros.

For example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitSensorIndex (1.3.6.1.3.94.1.8.1.2)

A unique value among all connUnitSensorEntrys with the same value of

connUnitSensorUnitId, in the range between 1 and

connUnitNumSensor[connUnitSensorUnitId].

Syntax

INTEGER (1..2147483647)

Access

read-only

5-24

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Sensor Table

Status

mandatory

Return Value

The sensor table index.

connUnitSensorName (1.3.6.1.3.94.1.8.1.3)

A textual identification of the sensor intended primarily for operator use.

Syntax

DisplayString

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-11 for SANbox 5200/5600 connUnitSensorName return

values.

Table 5-11. SANbox 5200/5600 ConnUnitSensorName Return Values

Table Index

Return Value

Power Supply 1 Status

Temperature Status

Temperature Sensor 1 Value

Refer to T a ble 5-12 for SANbox 5202/5602 connUnitSensorName return

values.

59047-09 C

5-25

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Sensor Table

Table 5-12. SANbox 5202/5602 ConnUnitSensorName Return Values

Table Index Return Value

Power Supply 1 Status

Power Supply 2 Status

Fan 1 Status

Fan 2 Status

Temperature Status

Temperature Sensor 1 Value

Refer to T a ble 5-12 for SANbox 9000 connUnitSensorName return values.

Table 5-13. SANbox 9000 ConnUnitSensorName Return Values

Table Index

Return Value

Power Supply 1 Status

Power Supply 2 Status

Fan 1 Status

Fan 2 Status

5-19

20-45

Temperature Status (1 value per blade)

Temperature Value (I/O blades have 4 val-

ues, CPU blades have 7 values)

46-60

Voltage Status (all blade types have 1

value)

connUnitSensorStatus (1.3.6.1.3.94.1.8.1.4)

The status indicated by the sensor.

Syntax

INTEGER {

unknown(1)

other(2) - the sensor indicates other than ok (warning or failure).

ok(3) - the sensor indicates ok

warning(4) - the sensor indicates a warning

failed(5) - the sensor indicates failure

}

5-26

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Sensor Table

Access

read-only

Status

mandatory

Return Value

Refer to the following tables for connUnitSensorStatus return values.

Table 5-14. ConnUnitSensorStatus Return Values for Board Temperature

Switch Value Return Value

Normal

Warm

OK (3)

Warning (4)

Failed (5)

Unknown (1)

Overheating

Other

Table 5-15. ConnUnitSensorStatus Return Values for Fan Status

Switch Value Return Value

Good

Bad

OK (3)

Failed (5)

Unknown (1)

Other

Table 5-16. ConnUnitSensorStatus Return Values for Voltage Status

Switch Value Return Value

Good

Bad

OK (3)

Failed (5)

Unknown (1)

Other

connUnitSensorInfo (1.3.6.1.3.94.1.8.1.5)

Miscellaneous static information about the sensor, such as its serial number.

Syntax

DisplayString

59047-09 C

5-27

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Sensor Table

Access

read-only

Status

mandatory

Return Value

Always returns an empty string.

connUnitSensorMessage (1.3.6.1.3.94.1.8.1.6)

This describes the status of the sensor as a message. It may also provide more

resolution on the sensor indication. For example, “Cover temperature 1503K,

above nominal operating range” ::= { connUnitSensorEntry 6 }.

Syntax

DisplayString

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-17 for SANbox 5200/5600 Series connUnitSensorMessage

values.

Table 5-17. ConnUnitSensorMessage Values

Sensor

Value

Power Supply

Fan

Good/Bad/NotInstalled

Normal/Warm/Overheating/NotInstalled

Degrees in C

Temperature Status

Temperature Value

5-28

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Sensor Table

connUnitSensorType (1.3.6.1.3.94.1.8.1.7)

The type of component being monitored by this sensor.

Syntax

INTEGER {

unknown(1),

other(2),

battery(3),

fan(4),

power-supply(5),

transmitter(6),

enclosure(7),

board(8),

receiver(9)

}

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-18 for connUnitSensorType return values.

Table 5-18. ConnUnitSensorType Return Values

Sensor Value

Temperature

Fan

Board (8)

Fan (4)

Power Supply

Voltage

Power Supply (5)

Board (8)

59047-09 C

5-29

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Sensor Table

connUnitSensorCharacteristic (1.3.6.1.3.94.1.8.1.8)

The characteristics being monitored by this sensor.

Syntax

INTEGER {

unknown(1),

other(2),

temperature(3),

pressure(4),

emf(5),

currentValue(6), - current is a keyword

airflow(7),

frequency(8),

power(9),

door(10)

}

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-19 for connUnitSensorCharacterisitic values.

Table 5-19. ConnUnitSensorCharacteristic Values

Sensor

Value

Temperature Value

Temperature (3)

Airflow (7)

Temperature Status

Fan

Power Supply

Power (9)

5-30

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

The objects described in this section are in a table format indexed by World Wide

Name and Index. The Index is the port number being interrogated. There may be

different numbers of ports in each switch so the agent must determine the

maximum allowable index on a switch by switch basis. An example of how to

access one of these objects given a WWN of 100000c0dd0090a7 is:

"snmpget localhost public

fcmgmt.connSet.connUnitPortTable.connUnitPortEntry.connUnitPortUni

tId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1".

connUnitPortUnitId (1.3.6.1.3.94.1.10.1.1)

The connUnitId of the connectivity unit that contains this port.

Syntax

FcGlobalId

Access

read-only

Status

mandatory

Return Value

Returns the World Wide Name of the switch followed by 8 bytes of zeros.

For example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitPortIndex (1.3.6.1.3.94.1.10.1.2)

A unique value among all connUnitPortEntrys on this connectivity unit, between 1

and connUnitNumPort[connUnitPortUnitId].

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

The index for each port on the switch. SANbox 5200/5600 Series = 1 -

8,12,16,20 (varies depending on number of licensed ports)

59047-09 C

5-31

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

connUnitPortType (1.3.6.1.3.94.1.10.1.3)

The port type.

Syntax

INTEGER {

unknown(1),

other(2),

not-present(3),

hub-port(4),

n-port(5), - end port for fabric

nl-port(6), - end port for loop

fl-port(7), - public loop

f-port(8), - fabric port

e-port(9), - fabric expansion port

g-port(10), - generic fabric port

domain-ctl(11), - domain controller

hub-controller(12),

scsi(13), - parallel SCSI port

escon(14),

lan(15),

wan(16),

ac(17), - AC power line

dc(18), - DC power line

ssa(19) - serial storage architecture

wdm(20),-- optical wave division multiplex

ib 21), - Infiniband

ipstore(22) - IP storage

}

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-20 for connUnitPortType return values.

Table 5-20. ConnUnitPortType Return Values

Switch Port Type

Return Value

g-port (10)

5-32

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

Table 5-20. ConnUnitPortType Return Values

Switch Port Type Return Value

fl-port (7)

f-port (8)

e-port (9)

other (2)

Donor

other

unknown (1)

connUnitPortFCClassCap (1.3.6.1.3.94.1.10.1.4)

Bit mask that specifies the classes of service capability of this port. If this is not

applicable, return all bits set to zero.

The bits have the following definition:

unknown - 0

class-f - 1

class-one - 2

class-two - 4

class-three - 8

class-four - 16

class-five - 32

class-six - 64

Syntax

OCTET STRING (SIZE (2))

Access

read-only

Status

mandatory

Return Value

Always returns 0x0d (Class f, Class 2, and Class 3).

59047-09 C

5-33

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

connUnitPortFCClassOp (1.3.6.1.3.94.1.10.1.5)

Bit mask that specifies the classes of service that are currently operational. If this

is not applicable, return all bits set to zero. This object has the same definition as

connUnitPortFCClassCap" ::= { connUnitPortEntry 5 }.

Syntax

OCTET STRING (SIZE (2))

Access

read-only

Status

mandatory

Return Value

If F or FL, returns 0x0c (Class 2, and Class 3), else returns 0x0d (Class f,

Class 2, and Class 3).

connUnitPortState (1.3.6.1.3.94.1.10.1.6)

The user selected state of the port hardware.

Syntax

INTEGER {

unknown(1),

online(2), - available for meaningful work

offline(3), - not available for meaningful work

bypassed(4), - no longer used (4/12/00)

diagnostics(5)

}

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-21 for connUnitPortState return values.

5-34

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

Table 5-21. ConnUnitPortState Return Values

Port Value Return Value

Online

online (2)

offline (3)

Offline

Downed

Diagnostics

other

diagnostics (5)

unknown (1)

connUnitPortStatus (1.3.6.1.3.94.1.10.1.7)

An overall protocol status for the port. This value of connUnitPortState is not

online, then this is reported Unknown.

Syntax

INTEGER {

unknown(1),

unused(2), - device cannot report this status

ready(3), - FCAL Loop or FCPH Link reset protocol; initialization complete

warning(4), - do not use (4/12/00)

failure(5), - do not use (4/12/00)

notparticipating(6), - loop not participating and does not have a loop address

initializing(7), - protocol is proceeding

bypass(8), - do not use (4/12/00)

ols(9) - FCP offline status

other(10) - status not described above

}

Access

read-only

Status

mandatory

Return Value

Always returns unused (2).

connUnitPortTransmitterType (1.3.6.1.3.94.1.10.1.8)

The technology of the port transceiver.

Syntax

INTEGER {

59047-09 C

5-35

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

unknown(1),

other(2),

unused(3),

shortwave(4),

longwave(5),

copper(6),

scsi(7),

longwaveNoOFC(8),

shortwaveNoOFC(9),

longwaveLED(10),

ssa(11)

}

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-22 for connUnitPortTransmitterType return values.

Table 5-22. ConnUnitPortTransmitterType Return Values

SFP Transmitter Type Return Value

Not Installed

Unused (3)

Shortwave (4)

Longwave (5)

LongwaveNoOFC (8)

ShortwaveNoOFC (9)

Copper (6)

Other

Unknown (1)

connUnitPortModuleType (1.3.6.1.3.94.1.10.1.9)

The module type of the port connector.

Syntax

INTEGER {

unknown(1),

other(2),

5-36

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

gbic(3),

embedded(4), - fixed (oneXnine)

glm(5),

gbicSerialId(6),

gbicNoSerialId(7),

gbicNotInstalled(8),

smallFormFactor(9) - this is generically a small form factor connector.

}

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-23 for connUnitPortModuleType return values.

Table 5-23. ConnUnitPortModuleType Return Values

Type Value

1 Gb/2Gb Ports

10 Gb Ports

smallFormFactor(9)

Other (2)

connUnitPortWwn (1.3.6.1.3.94.1.10.1.10)

The World Wide Name of the port, if applicable, otherwise returns all zeros.

Syntax

FcGlobalId

Access

read-only

Status

mandatory

Return Value

Returns the Port World Wide Name followed by 8 bytes of zeros. For

example, the return value for port #2 would be 20 02 00 C0 DD 00 71 C9 00

00 00 00 00 00 00 00, and the return value for port #2 would be 20 0E 00 C0

DD 00 71 C9 00 00 00 00 00 00 00 00. If a port is configured as a Donor,

return value = 0.

59047-09 C

5-37

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

connUnitPortFCId (1.3.6.1.3.94.1.10.1.11)

This is the assigned Fibre Channel ID of this port. This value is expected to be a

Big Endian value of 24 bits. If this is a loop, then it is the ALPA that is connected. If

this is an E_Port, then it will only contain the domain ID left justified, zero filled. If

this port does not have a Fibre Channel address, returns all bits set to 1.

Syntax

FcAddressId

Access

read-only

Status

mandatory

Return Value

The address for each port based on Domain, Area, and ALPA. For example,

port #15 would be equal to 640F00 (Domain = 0x64, Area = 0x0F, ALPA =

0x00).

connUnitPortSn (1.3.6.1.3.94.1.10.1.12)

The serial number of the unit. If not applicable, returns an empty string.

Syntax

DisplayString (SIZE(0..79))

Access

read-only

Status

unsupported

Return Value

Return Value = The media part number of the SFP (or MediaPartNumber) if

installed.

connUnitPortRevision (1.3.6.1.3.94.1.10.1.13)

The port revision. For example, for a GBIC.

Syntax

DisplayString (SIZE(0..79))

5-38

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

Access

read-only

Status

unsupported

Return Value

Return Value = The media revision of the SFP (or MediaRevision) if

installed.

connUnitPortVendor (1.3.6.1.3.94.1.10.1.14)

The port vendor. For example, for a GBIC.

Syntax

DisplayString (SIZE(0..79))

Access

read-only

Status

unsupported

Return Value

The port vendor as reported by the SFP (if supported).

connUnitPortSpeed (1.3.6.1.3.94.1.10.1.15)

The speed of the port in kilobytes per second.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

The operational speed, otherwise returns the administrative speed setting. If

1 Gbps, returns 106250. If 2 Gbps, returns 212500. If 4 Gbps, returns

425000. If 10 Gbps, returns 1062500.

59047-09 C

5-39

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

connUnitPortControl (1.3.6.1.3.94.1.10.1.16)

This object is used to control the addressed connUnit's port.

„

resetConnUnitPort: If the addressed connUnit allows this operation to be

performed to this port, the addressed port performs a vendor-specific ”reset”

operation. Examples of these operations are: the Link Reset protocol, the

Loop Initialization protocol, or a re-synchronization occurring between the

transceiver in the addressed port to the transceiver that the port is

connected to.

„

bypassConnUnitPort: If the addressed connUnit allows this operation to be

performed to this port, the addressed port performs a vendor-specific

“bypass” operation. Examples of these operations are transitioning from

online to offline, a request (non-participating) command to the Loop Port

state machine, or removal of the port from an arbitrated loop by a hub.

unbypassConnUnitPort: If the addressed connUnit allows this operation to

be performed to this port, the addressed port performs a vendor-specific

“unbypass” operation. Examples of these operations are the Link Failure

protocol, a request (participating) command to the Loop Port state machine,

or addition of the port to an arbitrated loop by a hub.

offlineConnUnitPort: If the addressed connUnit allows this operation to be

performed to this port, the addressed port performs a vendor-specific

“offline” operation. Examples of these operations are disabling a port's

transceiver, the Link Failure protocol, request (non-participating) command

to the Loop Port state machine, or removal of the port from an arbitrated

loop by a hub.

„

onlineConnUnitPort: If the addressed connUnit allows this operation to be

performed to this port, the addressed port performs a vendor-specific

“online” operation. Examples of these operations are enabling a port's

transceiver, the Link Failure protocol, request (participating) command to the

Loop Port state machine, or addition of the port from an arbitrated loop by a

hub.

resetConnUnitPortCounters: If the addressed connUnit allows this

operation to be performed to this port, the addressed port statistics table

counters will be set to zero.

Each implementation may choose not to allow any or all of these values on a SET.

On a read, if you do not support write, then return invalid. Otherwise, return the

last control operation attempted.

Syntax

INTEGER {

unknown(1),

invalid(2),

resetConnUnitPort(3),

5-40

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

bypassConnUnitPort(4),

unbypassConnUnitPort(5),

offlineConnUnitPort(6),

onlineConnUnitPort(7),

resetConnUnitPortCounters(8)

}

Access

read-write

Status

mandatory

Return Value

Refer to T a ble 5-24 for connUnitPortControl read return values.

Table 5-24. ConnUnitPortControl Read Return Values

Port Value Return Value

Online

online (7)

offline (6)

unknown (1)

Offline

Diagnostics

other

Refer to T a ble 5-25 for connUnitPortControl write command values.

Table 5-25. ConnUnitPortControl Write Command Values

Control Value

Command Sent

Online (7)

Offline (6)

online

offline

ResetCounters (8)

other

clear counters

error returned

connUnitPortName (1.3.6.1.3.94.1.10.1.17)

A user-defined name for this port. This means that up to DisplayString characters

may be supported. If less than, then the name will be truncated in the connunit.

59047-09 C

5-41

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

Syntax

INTEGER

Access

read-write

Status

mandatory

Return Value

The symbolic port name. A 1G or 2G only capable port, would return port

followed by the port number. 10G ports would return 10G followed by the

port number. For example, a 1G/2G port#2 would return 'Port2' and a 10G

port#18 would return '10G-18' by default.

connUnitPortPhysicalNumber (1.3.6.1.3.94.1.10.1.18)

This is the internal port number this port is known by. In many implementations,

this should be the same as connUnitPortIndex. Some implementations may have

an internal port representation not compatible with the rules for table indexes. In

that case, provide the internal representation of this port in this object. This value

may also be used in the connUnitLinkPortNumberX or connUnitLinkPortNumberY

objects of the connUnitLinkTable.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

The physical port number.

connUnitPortStatObject (1.3.6.1.3.94.1.10.1.19)

This contains the OID of the first object of the table that contains the statistics for

this particular port. If this has a value of zero, then there are no statistics available

for this port. The port type information will help identify the statistics objects that

will be found in the table.

Syntax

OBJECT IDENTIFIER

5-42

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

Access

read-only

Status

deprecated

Return Value

The port object ID (1.2.6.1.3.94.4.5.1.1).

connUnitPortProtocolCap (1.3.6.1.3.94.1.10.1.20)

Bit mask that specifies the driver level protocol capability of this port. If this is not

applicable, returns all bits set to zero.

The bits have the following definitions:

unknown - 0

Loop - 1

Fabric - 2

SCSI - 4

TCP/IP - 8

VI - 16

FICON - 32

Syntax

OCTET STRING (SIZE (2))

Access

read-only

Status

mandatory

Return Value

Always returns 0x03 (Loop, Fabric).

connUnitPortProtocolOp (1.3.6.1.3.94.1.10.1.21)

Bit mask that specifies the driver level protocol(s) that are currently operational. If

not applicable, return all bits set to zero. This object has the same definition as

connUnitPortProtocolCap.

Syntax

OCTET STRING (SIZE (2))

59047-09 C

5-43

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Table

Access

read-only

Status

unsupported

Return Value

Always returns error status "NoSuchName".

connUnitPortNodeWwn (1.3.6.1.3.94.1.10.1.22)

The Node World Wide Name of the port if applicable, otherwise all zeros. This

should have the same value for a group of related ports. The container is defined

as the largest physical entity. For example, all ports on HBAs on a host will have

the same Node WWN. All ports on the same storage subsystem will have the

same Node WWN." ::= { connUnitPortEntry 22 }.

Syntax

FcNameId

Access

read-only

Status

mandatory

Return Value

Returns the World Wide Node Name of the switch. For example: 10 00 00

C0 DD 00 71 C9.

connUnitPortHWState (1.3.6.1.3.94.1.10.1.23)

The hardware detected state of the port.

Syntax

INTEGER {

unknown(1),

failed(2), - port failed diagnostics

bypassed(3), - FCAL bypass, loop only

active(4), - connected to a device

loopback(5), - Port in external loopback

txfault(6), - Transmitter fault

noMedia(7), - media not installed linkDown

(8) - waiting for activity (rx sync)

}

5-44

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Event Table

Access

read-only

Status

mandatory

Return Value

Refer to T a ble 5-26 for connUnitPortHWState port state return values.

Table 5-26. ConnUnitPortHWState Port State Return Values

Port State

Return Value

If DiagStatus = Failed

Failed (2)

If SFP = Not Installed

If SyncStatus = SyncAcquired

If SyncStatus = SyncLost

Other

NoMedia (7)

Active (4)

LinkDown (8)

Unknown (1)

Event Table

The objects described in this section are in a table format indexed by World Wide

Name and Index. The maximum index is determined based on the number of

events in the table. An example of how to access one of these objects given a

WWN of 100000c0dd0090a7 is:

"snmpget localhost public

fcmgmt.connSet.connUnitEventTable.connUnitEventEntry.connUnitEvent

UnitId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1".

connUnitEventUnitId (1.3.6.1.3.94.1.11.1.1)

The connUnitId of the connectivity unit that contains this event table.

Syntax

FcGlobalId

Access

read-only

Status

mandatory

59047-09 C

5-45

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Event Table

Return Value

The World Wide Name of the switch followed by 8 bytes of zeros. For

example, 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitEventIndex (1.3.6.1.3.94.1.11.1.2)

Each connectivity unit has its own event buffer. As it wraps, it may write over

previous events. This object is an index into the buffer. It is recommended that this

table be read using getNext's to retrieve the initial table. The management

application should read the event table at periodic intervals and then determine if

any new entries were added by comparing the last known index value with the

current highest index value. The management application should then update its

copy of the event table. If the read interval is too long, it is possible that there may

be events that may not be contained in the agent's internal event buffer. For

example, an agent may read events 50-75. At the next read interval,

connUnitEventCurrID is 189. If the management application tries to read event

index 76, and the agent's internal buffer is 100 entries max, event index 76 will no

longer be available.

The index value is an incrementing integer starting from one every time there is a

table reset. On table reset, all contents are emptied and all indexes are set to

zero. When an event is added to the table, the event is assigned the next higher

integer value than the last item entered into the table. If the index value reaches

its maximum value, the next item entered will cause the index value to roll over

and start at one again.

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

The table index.

5-46

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Event Table

connUnitEventId (1.3.6.1.3.94.1.11.1.3)

The internal event ID. Incremented for each event, ranging between 1 and

connUnitMaxEvents. Not used as table index to simplify the agent

implementation. When this reaches the end of the range specified by

connUnitMaxEvents, the ID will roll over to start at one. This value will be set back

to one at reset. The relationship of this value to the index is that internal event ID

may represent a smaller number than a 32 bit integer (for example, maximum 100

entries) and would only have a value range up to connUnitMaxEvents.

Syntax

INTEGER

Access

read-only

Status

deprecated

Return Value

Unsupported. Always returns error status "NoSuchName".

connUnitREventTime (1.3.6.1.3.94.1.11.1.4)

The real time when the event occurred. It has the following format.

DDMMYYYY HHMMSS

DD=day number

MM=month number

YYYY=year number

HH=hour number

MM=minute number

SS=seconds number

If not applicable, return either a NULL string or “00000000 000000”.

Syntax

DisplayString (SIZE (0..15))

Access

read-only

Status

mandatory

59047-09 C

5-47

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Event Table

Return Value

The timestamp of the event.

connUnitSEventTime (1.3.6.1.3.94.1.11.1.5)

This is the sysUpTime timestamp when the event occurred.

Syntax

connUnitSEventTime

Access

read-only

Status

mandatory

Return Value

Always returns error status "NoSuchName".

connUnitEventSeverity (1.3.6.1.3.94.1.11.1.6)

The event severity level.

Syntax

FcEventSeverity

Access

read-only

Status

mandatory

Return Value

Always returns error status "NoSuchName".

connUnitEventType (1.3.6.1.3.94.1.11.1.7)

The type of this event.

Syntax

INTEGER {

unknown(1),

other(2),

status(3),

configuration(4),

5-48

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Event Table

topology(5)

}

Access

read-only

Status

mandatory

Return Value

Always returns 3 (Status).

connUnitEventObject (1.3.6.1.3.94.1.11.1.8)

This is used with the connUnitEventType to identify which object the event refers

to. Examples include connUnitPortStatus.connUnitId.connUnitPortIndex and

connUnitStatus.connUnitId.

Syntax

OBJECT IDENTIFIER

Access

read-only

Status

mandatory

Return Value

Always returns error status "NoSuchName".

connUnitEventDescr (1.3.6.1.3.94.1.11.1.9)

The description of the event.

Syntax

DisplayString

Access

read-only

Status

mandatory

59047-09 C

5-49

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Link Table

Return Value

The event description in the form:

"[Id][timestamp][severity][module][Description]"

Link Table

The objects described in this section are in a table format indexed by World Wide

Name and Index. The index is an index into the link table for the switch. There

may be as many link entries as there are ports. An example of how to access one

of these objects given a WWN of 100000c0dd0090a7 is:

"snmpget localhost public

fcmgmt.connSet.connUnitLinkTable.connUnitLinkEntry.connUnitLinkUni

tId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1".

If the agent is able to discover links which do not directly attach to members of its

agency and its discovery algorithm gives some assurance the links are recently

valid, it may include these links. Link information entered by administrative action

may be included even if not validated directly if the link has at least one endpoint

in this agency, but should not be included otherwise.

A connectivity unit should fill the table in as best it can. One of the methods to fill

this in would be to use the RNID ELS (ANSI document 99-422v0). This allows one

to query a port for the information needed for the link table.

This table is accessed either directly if the management software has an index

value or via GetNexts. The value of the indexes are not required to be contiguous.

Each entry created in this table will be assigned an index. This relationship is kept

persistent until the entry is removed from the table or the system is reset. The total

number of entries are defined by the size of the table

connUnitLinkUnitId (1.3.6.1.3.94.1.12.1.1)

The connUnitId of the connectivity unit that contains this link table.

Syntax

connUnitLinkUnitId

Access

read-only

Status

mandatory

Return Value

The World Wide Name of the switch followed by 8 bytes of zeros. For

example, 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

5-50

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Link Table

connUnitLinkIndex (1.3.6.1.3.94.1.12.1.2)

This index is used to create a unique value for each entry in the link table with the

same connUnitLinkUnitId. The value can only be reused if it is not currently in use

and the value is the next candidate to be used. This value wraps at the highest

value represented by the size of INTEGER. This value is reset to zero when the

system is reset, and the first value to be used is one.

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

The table index.

connUnitLinkNodeIdX (1.3.6.1.3.94.1.12.1.3)

The Node WWN of the unit at one end of the link. If the Node WWN is unknown

and the Node is a connUnit in the responding agent, then the value of this object

must be equal to its connUnitID.

Syntax

OCTET STRING (SIZE(16))

Access

read-only

Status

mandatory

Return Value

The World Wide Name of the local switch for each entry in the link table. For

example, 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitLinkPortNumberX (1.3.6.1.3.94.1.12.1.4)

The port number on the unit specified by connUnitLinkNodeIdX if known,

otherwise -1. If the value is non-negative, then it will be equal to

connUnitPortPhysicalNumber.

59047-09 C

5-51

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Link Table

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

The local port number for each entry in the link table.

connUnitLinkPortWwnX (1.3.6.1.3.94.1.12.1.5)

The port WWN of the unit specified by connUnitLinkNodeIdX if known, otherwise

16 octets of binary 0" ::= { connUnitLinkEntry 5 }.

Syntax

connUnitLinkPortWwnX

Access

read-only

Status

mandatory

Return Value

The local World Wide port number for each entry in the link table.

connUnitLinkNodeIdY (1.3.6.1.3.94.1.12.1.6)

The Node WWN of the unit at the other end of the link. If the Node WWN is

unknown and the Node is a connUnit in the responding SNMP agency, then the

value of this object must be equal to its connUnitID.

Syntax

OCTET STRING (SIZE(16))

Access

read-only

Status

mandatory

5-52

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Link Table

Return Value

The remote World Wide Node number for each entry in the link table.

connUnitLinkPortNumberY (1.3.6.1.3.94.1.12.1.7)

The port number on the unit specified by connUnitLinkNodeIdY if known,

otherwise -1. If the value is non-negative, then it will be equal to

connUnitPortPhysicalNumber.

Syntax

OCTET STRING (SIZE(16))

Access

read-only

Status

mandatory

Return Value

The remote port number for inter-switch link, if known. Otherwise, -1

(0xFFFFFFFF).

connUnitLinkPortWwnY (1.3.6.1.3.94.1.12.1.8)

The port WWN on the unit specified by connUnitLinkNodeIdY if known, otherwise

16 octets of binary 0" ::= { connUnitLinkEntry 8 }.

Syntax

FcGlobalId

Access

read-only

Status

mandatory

Return Value

The remote Port World Wide Name for each entry in the link table, if known.

connUnitLinkAgentAddressY (1.3.6.1.3.94.1.12.1.9)

The address of an FCMGMT MIB agent for the Node identified by

connUnitLinkNodeIdY, if known. Otherwise 16 octets of binary 0" ::=

{connUnitLinkEntry 9}.

59047-09 C

5-53

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Link Table

Syntax

OCTET STRING (SIZE(16))

Access

read-only

Status

mandatory

Return Value

The remote IP address of the remote switch, if known. Otherwise, returns

sixteen zeroes.

connUnitLinkAgentAddressTypeY (1.3.6.1.3.94.1.12.1.10)

If connUnitLinkAgentAddressY is nonzero, it is a protocol address.

ConnUnitLinkAgentAddressTypeY is the “address family number” assigned by

IANA to identify the address format.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Always returns 1 (Ipv4).

connUnitLinkAgentPortY (1.3.6.1.3.94.1.12.1.11)

The IP port number for the agent. This is provided in case the agent is at a

non-standard SNMP port.

Syntax

INTEGER

Access

read-only

Status

mandatory

5-54

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Link Table

Return Value

Returns value of 0.

connUnitLinkUnitTypeY (1.3.6.1.3.94.1.12.1.12)

Type of the Fibre Channel connectivity unit as defined in connUnitType.

Syntax

FcUnitType

Access

read-only

Status

mandatory

Return Value

The type of remote device in the link table. For example, switch (4).

connUnitLinkConnIdY (1.3.6.1.3.94.1.12.1.13

This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is

expected to be a Big Endian value of 24 bits. If this is loop, then it is the ALPA that

is connected. If this is an E_Port, then it will only contain the domain ID. If not any

of those, unknown or cascaded loop, returns all bits set to 1.

Syntax

OCTET STRING (SIZE(3))

Access

read-only

Status

mandatory

Return Value

The remote Fibre Channel address of each entry in the link table.

connUnitLinkCurrIndex (1.3.6.1.3.94.1.12.1.14)

The last used link index.

Syntax

INTEGER

59047-09 C

5-55

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Zone Table

Access

read-only

Status

mandatory

Return Value

The last used link table index number.

Zone Table

The objects described in this section are in a table format indexed Zone number

and Index. The zones are numbered 1 to connUnitZoneSetNumZones, the index

represents the members within the zones.

An example of how to access one of these objects:

fcmgmt.connSet.connUnitZoneTable.connUnitZoneEntry.connUnitZoneIndex.1.1

connUnitZoneIndex (1.3.6.1.3.94.1.13.1.1)

Unique table index for each zone. Valid values are between 1 and

connUnitZoneSetNumZones.

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

Returns index number for each zone within the active zoneset.

connUnitZoneMemberIndex (1.3.6.1.3.94.1.13.1.2)

Unique table index for each zone member. Valid values are between 1 and

connUnitZoneNumMembers.

Syntax

INTEGER (1..2147483647)

Access

read-only

5-56

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Zone Table

Status

mandatory

Return Value

Returns index number for each member within a zone.

connUnitZoneSetName (1.3.6.1.3.94.1.13.1.3)

Name of the active zone set to which the zone and zone member belong.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

Returns the zone set name.

connUnitZoneSetNumZones (1.3.6.1.3.94.1.13.1.4)

The number of zones in the active zone set.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Returns the number of zones within the active zoneset.

connUnitZoneName (1.3.6.1.3.94.1.13.1.5)

Name of the zone.

Syntax

DisplayString (SIZE (0..79))

59047-09 C

5-57

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Zone Table

Access

read-only

Status

mandatory

Return Value

Returns the name of the zone.

connUnitZoneCapabilities (1.3.6.1.3.94.1.13.1.6)

1-byte bit mask that specifies the zoning capabilities supported by the fabric.

Bit 7 - Soft zones supported.

Bit 6 - Hard zones supported.

Bits 5-0 - Reserved.

Syntax

OCTET STRING (SIZE(1))

Access

read-only

Status

mandatory

Return Value

Always returns 0xC0.

connUnitZoneEnforcementState (1.3.6.1.3.94.1.13.1.7)

1-byte bit mask that specifies the current enforcement of the Zone Set.

Bit 7 - Soft zone set enforced.

Bit 6 - Hard zone set enforced.

Bits 5-0 - Reserved.

Syntax

OCTET STRING (SIZE(1))

Access

read-only

5-58

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Zone Table

Status

mandatory

Return Value

Returns the zone type. Mapped as follows:

Soft.......0x80

Hard......0x40

connUnitZoneAttributeBlock (1.3.6.1.3.94.1.13.1.8)

A variable length structure that contains extended zone attributes defined in the

FC-GS-4 enhanced zone server. See FC-GS-4 draft standard for details and

format of the structure. Support of this object is optional.

Syntax

OCTET STRING (SIZE(80))

Access

read-only

Status

mandatory

Return Value

Not supported. Always returns SNMP error NoSuchName.

connUnitZoneNumMembers (1.3.6.1.3.94.1.13.1.9)

Number of zone members in the zone: connUnitZoneName.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Returns total number of members in a zone.

59047-09 C

5-59

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Zone Table

connUnitZoneMemberIdType (1.3.6.1.3.94.1.13.1.10)

Type of zone member ID:

1- Port WWN

2- Domain & Port ID

3- FC Address

4- Node WWN

5- Alias Name

6-'FF'h - Vendor specified.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Retrieves the member ID type.

WWN...............0x01 // Port WWN

Domain/Port....0x02 // Domain & Port ID

FCaddress.......0x03 // FC Address

[other]................0xff // Vendor specific

connUnitZoneMemberID (1.3.6.1.3.94.1.13.1.11)

ID of the zone member based on connUnitZoneMemberIdType.

Syntax

FcGlobalId

Access

read-only

Status

mandatory

Return Value

Returns the zone member name as a 16 8-bit octets. Mapped as follows:

5-60

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Zoning Alias Table

WWN member - WWN (8 bytes) followed by 8 bytes of zeros.

FC address - FC address (3 bytes) followed by 13 bytes of zeros.

Domain/Port - Domain/Port address (2 bytes) followed by 14 bytes of zeros.

Zoning Alias Table

The objects described in this section are in a table format indexed by Alias

Number and Index. The aliases are numbered 1 to

connUnitZoningAliasNumAliases, the index represents the members within the

alias. An example of how to access one of these objects:

"fcmgmt.connSet.connUnitZoneTable.connUnitZoneEntry.connUnitZoningAliasIn

dex.1.1"

connUnitZoningAliasIndex (1.3.6.1.3.94.1.14.1.1)

Unique table index for each alias. Valid values are between 1 and

connUnitZoningAliasNumAliases.

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

Returns the alias index.

connUnitZoningAliasMemberIndex (1.3.6.1.3.94.1.14.1.2)

Unique table index for each alias member. Valid values are between 1 and

connUnitZoningAliasNumMembers.

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

59047-09 C

5-61

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Zoning Alias Table

Return Value

Returns the alias member index.

connUnitZoningAliasNumAliases (1.3.6.1.3.94.1.14.1.3)

The number of aliases defined in this table.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Returns number of aliases defined.

connUnitZoningAliasName (1.3.6.1.3.94.1.14.1.4)

The alias name.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

Returns Alias name.

connUnitZoningAliasNumMembers (1.3.6.1.3.94.1.14.1.5)

Number of members in the alias: connUnitZoningAliasName.

Syntax

INTEGER

Access

read-only

5-62

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Zoning Alias Table

Status

mandatory

Return Value

Returns number of members in a defined Alias zone.

connUnitZoningAliasMemberIdType (1.3.6.1.3.94.1.14.1.6)

Type of alias member ID:

1- Port WWN

2- Domain & Port ID

3- FC Address

Others: reserved.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Returns the alias member Id type. Mapped as follows:

WWN................. 0x01 // Port WWN

DomainPort........ 0x02 // Domain & Port ID

FC Address........ 0x03 // FC Address

[other]................ 0xff // Vendor specific

connUnitZoningAliasMemberID (1.3.6.1.3.94.1.14.1.7)

ID of the alias member based on connUnitZoningAliasMemberIdType.

Syntax

FcGlobalId

Access

read-only

59047-09 C

5-63

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Status

mandatory

Return Value

Returns the alias zone member name as 16 8-bit octets. Mapped as follows:

WWN member - WWN (8 bytes) followed by 8 bytes of zeros.

FC address - FC address (3 bytes) followed by 13 bytes of zeros.

Domain/Port - Domain/Port address (2 bytes) followed by 14 bytes of zeros.

Port Statistics Table

The objects described in this section are in a table format indexed by World Wide

Name and Index. The index represents the port number to interrogate. An

example of how to access one of these objects given a WWN of

100000c0dd0090a7 is:

"snmpget localhost public

fcmgmt.statSet.connUnitPortStatTable.connUnitPortStatEntry.connUni

tPortStatUnitId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1".

There is one and only one statistics table for each individual port. For all objects in

statistics table, if the object is not supported by the conn unit then the high order

bit is set to 1 with all other bits set to zero. The high order bit is reserved to

indicate if the object if supported or not. All objects start at a value of zero at

hardware initialization and continue incrementing till end of 63 bits and then wrap

to zero.

connUnitPortStatUnitId (1.3.6.1.3.94.4.5.1.1)

A unique value among all entries in this table having the same

connUnitPortStatUnitId, between 1 and connUnitNumPort

[connUnitPortStatUnitId].

Syntax

FcGlobalId

Access

read-only

Status

mandatory

5-64

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Return Value

Returns the World Wide Name of the switch followed by 8 bytes of zeros.

For example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitPortStatIndex (1.3.6.1.3.94.4.5.1.2)

A unique value among all entries in this table, between 0 and

connUnitNumPort[connUnitPortUnitId].

Syntax

INTEGER (0..2147483647)

Access

read-only

Status

mandatory

Return Value

The port table index.

connUnitPortStatCountError (1.3.6.1.3.94.4.5.1.3)

A count of the errors that have occurred on this port.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

A hexidecimal value indicating the total number of errors for a port.

connUnitPortStatCountTxObjects (1.3.6.1.3.94.4.5.1.4)

The number of frames/packets/IOs/etc transmitted by this port. A Fibre Channel

frame starts with SOF and ends with EOF. Fibre Channel loop devices should not

count frames passed through. This value represents the sum total for all other Tx

objects.

Syntax

OCTET STRING (SIZE (8))

59047-09 C

5-65

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Access

read-only

Status

mandatory

Return Value

A hexidecimal value indicating the total number of bytes transmitted by a

port.

connUnitPortStatCountRxObjects (1.3.6.1.3.94.4.5.1.5)

The number of frames/packets/IOs/etc received by this port. A Fibre Channel

frame starts with SOF and ends with EOF. Fibre Channel loop devices should not

count frames passed through. This value represents the sum total for all other Rx

objects.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

A hexidecimal value indicating the total number of bytes received by a port.

connUnitPortStatCountTxElements (1.3.6.1.3.94.4.5.1.6)

The number of octets or bytes that have been transmitted by this port. One

second periodic polling of the port. This value is saved and compared with the

next polled value to compute net throughput. For Fibre Channel, ordered sets are

not included in the count.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

5-66

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Return Value

A hexidecimal value indicating the total number of bytes transmitted by a

port.

connUnitPortStatCountRxElements (1.3.6.1.3.94.4.5.1.7)

The number of octets or bytes that have been received by this port. One second

periodic polling of the port. This value is saved and compared with the next polled

value to compute net throughput. For Fibre Channel, ordered sets are not

included in the count.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

A hexidecimal value indicating the total number of bytes received by a port.

connUnitPortStatCountBBCreditZero (1.3.6.1.3.94.4.5.1.8)

Count of transitions in/out of BBcredit zero state. The other side is not providing

any credit. This is a Fibre Channel statistic only.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountInputBuffersFull (1.3.6.1.3.94.4.5.1.9)

Count of occurrences when all input buffers of a port were full and outbound

buffer-to-buffer credit transitioned to zero. There is no credit to provide to other

side. This is a Fibre Channel statistic only.

59047-09 C

5-67

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountFBSYFrames (1.3.6.1.3.94.4.5.1.10)

Count of times that FBSY was returned to this port as a result of a frame that

could not be delivered to the other end of the link. This occurs if either the fabric or

the destination port is temporarily busy. Port can only occur on SOFc1 frames (the

frames that establish a connection). This is a Fibre Channel-only statistic. This is

the sum of all classes. If you cannot keep the by-class counters, then keep the

sum counters.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

A hexidecimal number indicating the total number of FBusy on a port.

connUnitPortStatCountPBSYFrames (1.3.6.1.3.94.4.5.1.11)

Count of times that PBSY was returned to this port as a result of a frame that

could not be delivered to the other end of the link. This occurs if the destination

port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that

establish a connection). This is a Fibre Channel-only statistic. This is the sum of

all classes. If you cannot keep the by-class counters, then keep the sum counters.

Syntax

OCTET STRING (SIZE (8))

5-68

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit set to 1 with remaining bits set to

zero.

connUnitPortStatCountFRJTFrames (1.3.6.1.3.94.4.5.1.12)

Count of times that FRJT was returned to this port as a result of a frame that was

rejected by the fabric. This is the total for all classes and is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

A hexidecimal number indicating the total number of Frame Rejects on a

port.

connUnitPortStatCountPRJTFrames (1.3.6.1.3.94.4.5.1.13)

Count of times that FRJT was returned to this port as a result of a frame that was

rejected at the destination N_Port. This is the total for all classes and is a Fibre

Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

59047-09 C

5-69

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass1RxFrames (1.3.6.1.3.94.4.5.1.14)

Count of Class 1 frames received at this port. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass1TxFrames (1.3.6.1.3.94.4.5.1.15)

Count of Class 1 frames transmitted out this port. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass1FBSYFrames (1.3.6.1.3.94.4.5.1.16

Count of times that FBSY was returned to this port as a result of a Class 1 frame

that could not be delivered to the other end of the link. This occurs if either the

fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1

frames (the frames that establish a connection). This is a Fibre Channel-only

statistic.

5-70

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass1PBSYFrames (1.3.6.1.3.94.4.5.1.17)

Count of times that PBSY was returned to this port as a result of a Class 1 frame

that could not be delivered to the other end of the link. This occurs if the

destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames

(the frames that establish a connection). This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass1FRJTFrames (1.3.6.1.3.94.4.5.1.18

Count of times that FRJT was returned to this port as a result of a Class 1 frame

that was rejected by the fabric. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

59047-09 C

5-71

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass1PRJTFrames (1.3.6.1.3.94.4.5.1.19)

Count of times that FRJT was returned to this port as a result of a Class 1 frame

that was rejected at the destination N_Port. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass2RxFrames (1.3.6.1.3.94.4.5.1.20)

Count of Class 2 frames received at this port. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of Class 2 frames received by a port.

connUnitPortStatCountClass2TxFrames (1.3.6.1.3.94.4.5.1.21)

Count of Class 2 frames transmitted out this port. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

5-72

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Access

read-only

Status

mandatory

Return Value

The total number of Class 2 frames transmitted by a port.

connUnitPortStatCountClass2FBSYFrames (1.3.6.1.3.94.4.5.1.22)

Count of times that FBSY was returned to this port as a result of a Class 2 frame

that could not be delivered to the other end of the link. This occurs if either the

fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1

frames (the frames that establish a connection). This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass2PBSYFrames (1.3.6.1.3.94.4.5.1.23)

Count of times that PBSY was returned to this port as a result of a Class 2 frame

that could not be delivered to the other end of the link. This occurs if the

destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames

(the frames that establish a connection). This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

59047-09 C

5-73

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass2FRJTFrames (1.3.6.1.3.94.4.5.1.24)

Count of times that FRJT was returned to this port as a result of a Class 2 frame

that was rejected by the fabric. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass2PRJTFrames (1.3.6.1.3.94.4.5.1.25)

Count of times that FRJT was returned to this port as a result of a Class 2 frame

that was rejected at the destination N_Port. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountClass3RxFrames (1.3.6.1.3.94.4.5.1.26)

Count of Class 3 frames received at this port. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

5-74

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Access

read-only

Status

mandatory

Return Value

The total number of Class 3 frames received by a port.

connUnitPortStatCountClass3TxFrames (1.3.6.1.3.94.4.5.1.27)

Count of Class 3 frames transmitted out this port. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of Class 3 frames transmitted by a port.

connUnitPortStatCountClass3Discards (1.3.6.1.3.94.4.5.1.28)

Count of Class 3 frames that were discarded upon reception at this port. There is

no FBSY or FRJT generated for Class 3 frames. They are simply discarded if they

cannot be delivered. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of Class3Toss frames for a port.

59047-09 C

5-75

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

connUnitPortStatCountRxMulticastObjects (1.3.6.1.3.94.4.5.1.29)

Count of Multicast frames or packets received at this port.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountTxMulticastObjects (1.3.6.1.3.94.4.5.1.30)

Count of Multicast frames or packets transmitted out this port.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountRxBroadcastObjects (1.3.6.1.3.94.4.5.1.31)

Count of Broadcast frames or packets received at this port.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

5-76

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountTxBroadcastObjects (1.3.6.1.3.94.4.5.1.32)

Count of Broadcast frames or packets transmitted out this port. On a Fibre

Channel loop, count only OPNr frames generated.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountRxLinkResets (1.3.6.1.3.94.4.5.1.33)

Count of link resets. This is the number of LRs received. This is a Fibre

Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of RxLinkResets received by a port.

connUnitPortStatCountTxLinkResets (1.3.6.1.3.94.4.5.1.34)

Count of link resets. The number of LRs transmitted. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

59047-09 C

5-77

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Access

read-only

Status

mandatory

Return Value

The total number of TxLinkResets transmitted by a port.

connUnitPortStatCountNumberLinkResets (1.3.6.1.3.94.4.5.1.35)

Count of link resets and LIPs detected at this port. The number of times the reset

link protocol is initiated. These are the count of the logical resets, and a count of

the number of primitives. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of TotalLinkResets for a port.

connUnitPortStatCountRxOfflineSequences (1.3.6.1.3.94.4.5.1.36)

Count of offline primitive OLSs received at this port. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of RxOfflineSeqs received by a port.

5-78

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

connUnitPortStatCountTxOfflineSequences (1.3.6.1.3.94.4.5.1.37)

Count of offline primitive OLSs transmitted by this port. This is a Fibre

Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of TxOfflineSeqs transmitted by a port.

connUnitPortStatCountNumberOfflineSequences (1.3.6.1.3.94.4.5.1.38)

Count of offline primitive sequences received at this port. This is a Fibre

Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of TotalOfflineSeqs received by a port.

connUnitPortStatCountLinkFailures (1.3.6.1.3.94.4.5.1.39)

Count of link failures. This count is part of the Link Error Status Block (LESB).

(FC-PH 29.8). This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

59047-09 C

5-79

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Status

mandatory

Return Value

The total number of LinkFailures for a port.

connUnitPortStatCountInvalidCRC (1.3.6.1.3.94.4.5.1.40)

Count of frames received with invalid CRC. This count is part of the Link Error

Status Block (LESB). (FC-PH 29.8). Loop ports should not count CRC errors

passing through when monitoring. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of InvalidCRCs received by a port.

connUnitPortStatCountInvalidTxWords (1.3.6.1.3.94.4.5.1.41)

Count of invalid transmission words received at this port. This count is part of the

Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of DecodeErrors for a port.

5-80

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

connUnitPortStatCountPrimitiveSequenceProtocolErrors

(1.3.6.1.3.94.4.5.1.42)

Count of primitive sequence protocol errors detected at this port. This count is part

of the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of PrimSeqErrors for a port.

connUnitPortStatCountLossofSignal (1.3.6.1.3.94.4.5.1.43)

Count of instances of signal loss detected at port. This count is part of the Link

Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountLossofSynchronization (1.3.6.1.3.94.4.5.1.44)

Count of instances of synchronization loss detected at port. This count is part of

the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

59047-09 C

5-81

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

Access

read-only

Status

mandatory

Return Value

The total number LossOfSyncs detected by this port.

connUnitPortStatCountInvalidOrderedSets (1.3.6.1.3.94.4.5.1.45)

Count of invalid ordered sets received at port. This count is part of the Link Error

Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountFramesTooLong (1.3.6.1.3.94.4.5.1.46)

Count of frames received at this port where the frame length was greater than

what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of

frame delimiter. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

5-82

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Port Statistics Table

connUnitPortStatCountFramesTruncated (1.3.6.1.3.94.4.5.1.47)

Count of frames received at this port where the frame length was less than the

minimum indicated by the frame header (normally 24 bytes). It could be more if

the DFCTL field indicates an optional header should have been present. This is a

Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountAddressErrors (1.3.6.1.3.94.4.5.1.48)

Count of frames received with unknown addressing.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

The total number of InvalidDestAddr frames received by a port.

connUnitPortStatCountDelimiterErrors (1.3.6.1.3.94.4.5.1.49)

Count of invalid frame delimiters received at this port. An example is a frame with

a Class 2 start and a Class 3 at the end. This is a Fibre Channel-only statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

59047-09 C

5-83

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Simple Name Server Table

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

connUnitPortStatCountEncodingDisparityErrors (1.3.6.1.3.94.4.5.1.50)

Count of disparity errors received at this port. This is a Fibre Channel-only

statistic.

Syntax

OCTET STRING (SIZE (8))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns high order bit to 1 with all other bits set to zero.

Simple Name Server Table

The objects described in this section are in a table format indexed by World Wide

Name and Index. The index represents the table index. An example of how to

access one of these objects given a WWN of 100000c0dd0090a7 is:

"snmpget localhost public

fcmgmt.connUnitServiceSet.connUnitServiceTables.connUnitSnsTable.c

onnUnitSnsEntry.connUnitSnsId.16.0.0.192.221.0.144.167.0.0.0.0.0.0

.0.0.1".

The Fibre Channel Simple Name Server table contains an entry for each device

presently known to this connUnit. There will not be any version on this since

FC-GS3 does not define a version today.

This table is accessed either directly if the management software has an index

value or using GetNexts. The value of the indexes are not required to be

contiguous. Each entry created in this table will be assigned an index. This

relationship is kept persistent until the entry is removed from the table or the

system is reset. The total number of entries are defined by the size of the table.

5-84

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Simple Name Server Table

connUnitSnsMaxEntry (1.3.6.1.3.94.5.1.1)

The current number of entries in the table.

Syntax

INTEGER

MaxAccess

read-only

Status

mandatory

Return Value

Returns the number of entries registered in the Simple Name Server for all

switches.

connUnitSnsId (1.3.6.1.3.94.5.2.1.1.1)

The connUnitId of the connectivity unit that contains this Name Server table.

Syntax

OCTET STRING (SIZE (16))

Access

read-only

Status

mandatory

Return Value

Returns the World Wide Name of the switch followed by 8 bytes of zeros.

For example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.

connUnitSnsPortIndex (1.3.6.1.3.94.5.2.1.1.2)

The physical port number of this SNS table entry. Each physical port has an SNS

table with 1-n entries indexed by ConnUnitSnsPortIdentifier (port address).

Syntax

INTEGER

Access

read-only

59047-09 C

5-85

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Simple Name Server Table

Status

mandatory

Return Value

The name server table index.

connUnitSnsPortIdentifier (1.3.6.1.3.94.5.2.1.1.3)

The port identifier for this entry in the SNS table.

Syntax

FcAddressId

Access

read-only

Status

mandatory

Return Value

The 24-bit Fibre Channel address for each entry in the name server table

based on Domain, Area, and ALPA.

connUnitSnsPortName (1.3.6.1.3.94.5.2.1.1.4)

The Port World Wide Name for this entry in the SNS table.

Syntax

FcNameId

Access

read-only

Status

mandatory

Return Value

The Port World Wide Name of the device in the name server table.

connUnitSnsNodeName (1.3.6.1.3.94.5.2.1.1.5)

The Node name for this entry in the SNS table.

Syntax

FcNameId

5-86

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Simple Name Server Table

Access

read-only

Status

mandatory

Return Value

The Node World Wide Name of the device in the name server table.

connUnitSnsClassOfSvc (1.3.6.1.3.94.5.2.1.1.6)

The classes of service offered by this entry in the SNS table.

Syntax

OCTET STRING (SIZE (1))

Access

read-only

Status

mandatory

Return Value

A value indicating the first registered class of service for an entry in the

name server table. This is a bit mask where each bit that represents the

class of service is set to a value of one if the class is supported. Class 1 is bit

zero.

connUnitSnsNodeIPAddress (1.3.6.1.3.94.5.2.1.1.7)

The IPv6 formatted address of the Node for this entry in the SNS table.

Syntax

OCTET STRING (SIZE (16))

Access

read-only

Status

mandatory

Return Value

The switch IP address in IPv6 format.

59047-09 C

5-87

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Simple Name Server Table

connUnitSnsProcAssoc (1.3.6.1.3.94.5.2.1.1.8)

The process associator for this entry in the SNS table.

Syntax

OCTET STRING (SIZE (16))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName".

connUnitSnsFC4Type (1.3.6.1.3.94.5.2.1.1.9)

The FC-4 types supported by this entry in the SNS table.

Syntax

OCTET STRING (SIZE (32))

Access

read-only

Status

mandatory

Return Value

A value indicating the FC-4 Types registered for the device in the name

server table. This is a 32 byte field with each bit uniquely identifying the FC-4

Type registered as defined in FC-GS-3 specification. Example: SCSI FCP

(bit 8) = 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00 00 00 00 00 00 00 00 00 00.

connUnitSnsPortType (1.3.6.1.3.94.5.2.1.1.10)

The port type of this entry in the SNS table.

Syntax

OCTET STRING (SIZE (1))

Access

read-only

5-88

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Simple Name Server Table

Status

mandatory

Return Value

A value indicating the PortType for the entry in the name server table. Refer

to T a ble 5-27 for connUnitPortType port type return values.

Table 5-27. ConnUnitPortType State Return Values

Port Type

Return Value (hexidecimal)

F/NL

connUnitSnsPortIPAddress (1.3.6.1.3.94.5.2.1.1.11)

The IPv6 formatted address of this entry in the SNS table.

Syntax

OCTET STRING (SIZE (16))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName".

connUnitSnsFabricPortName (1.3.6.1.3.94.5.2.1.1.12)

The fabric port name of this entry in the SNS table.

Syntax

FcNameId

59047-09 C

5-89

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Simple Name Server Table

Access

read-only

Status

mandatory

Return Value

The switch port Port World Wide Name for the device in the name server

table.

connUnitSnsHardAddress (1.3.6.1.3.94.5.2.1.1.13)

The hard ALPA of this entry in the SNS table.

Syntax

FcAddressId

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName".

connUnitSnsSymbolicPortName (1.3.6.1.3.94.5.2.1.1.14)

The symbolic port name of this entry in the SNS table.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

The symbolic Port Name registered by the device in the name server table. If

not registered, returns (NULL).

5-90

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Platform Table

connUnitSnsSymbolicNodeName (1.3.6.1.3.94.5.2.1.1.15)

The symbolic Node name of this entry in the SNS table.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

The symbolic Node Name registered by the device in the name server table.

If not registered, returns (NULL).

Platform Table

The Platform Table is a simple, read-only view of platform registration entries.

Platform registry is a service hosted by the connectivity unit, in a very similar

manner as the SNS table. The platform table is contained by the connectivity unit.

A platform can register it's attributes and platform nodes with the registry service.

The platform table is a flat, double-indexed MIB table. To keep the table simple,

only one platform management URL is exposed. If a platform registers more than

one management URL, the first one is reported in this table. This table is based on

the fabric configuration server defined in the FC-GS-3 standard and enhanced

platform attributes proposed for FC-GS-4. Note that the information contained in

this table may only contain the platforms that this connUnit can see or it may

contain a fabric wide view of the platforms.

connUnitPlatformMaxEntry (1.3.6.1.3.94.5.1.2)

The maximum number of entries in the platform table.

Syntax

INTEGER

Access

read-only

Status

mandatory

59047-09 C

5-91

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Platform Table

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformIndex (1.3.6.1.3.94.5.2.2.1.1)

Unique table index for each platform. Valid values are between 1 and

connUnitPlatformsMaxEntry.

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformNodeIndex (1.3.6.1.3.94.5.2.2.1.2)

Unique table index for each platform node. Valid values are between 1 and

connUnitPlatformsNumNodes.

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformUnitID (1.3.6.1.3.94.5.2.2.1.3)

The connUnitId of the connectivity unit that contains this Platform table.

Syntax

FcGlobalId

Access

read-only

5-92

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Platform Table

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformName (1.3.6.1.3.94.5.2.2.1.4)

The platform name. May be either a readable string or a unique ID format as

specified in the FC-GS-4 draft standard.

Syntax

OCTET STRING (SIZE(79))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformType (1.3.6.1.3.94.5.2.2.1.6)

The platform type.

Syntax

FcUnitType

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformLabel (1.3.6.1.3.94.5.2.2.1.7)

An administratively assigned symbolic name for the platform. The Platform Label

shall only contain print-able ASCII characters.

Syntax

DisplayString (SIZE (0..79))

59047-09 C

5-93

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Platform Table

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformDescription (1.3.6.1.3.94.5.2.2.1.8)

A textual description of the platform. This value should include the full name and

version identification of the platform's hardware type and software operating

system. The Platform Description shall only contain printable ASCII characters.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformLocation (1.3.6.1.3.94.5.2.2.1.9)

The physical location of the platform (e.g., telephone closet, 3rd floor). The

Platform Location shall only contain printable ASCII characters.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

5-94

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Platform Table

connUnitPlatformManagementUrl (1.3.6.1.3.94.5.2.2.1.10)

Primary management URL for the platform. If the platform registers more than one

URL, then this URL is equal to the first in the list.

Syntax

DisplayString (SIZE (0..79))

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformNumNodes (1.3.6.1.3.94.5.2.2.1.11)

Number of nodes contained in the platform.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

Unsupported. Always returns error status "NoSuchName"

connUnitPlatformNodeName (1.3.6.1.3.94.5.2.2.1.12)

The name (WWN - world wide name) of the node contained by the platform.

Syntax

FcGlobalId

Access

read-only

Status

read-only

59047-09 C

5-95

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Trap Table

Return Value

Unsupported. Always returns error status "NoSuchName"

Trap Table

Traps are asynchronous messages sent from the agent (residing on the switch) to

the manager (residing on the workstation) to identify significant events.

There can be up to 5 trap addresses within the trap table. All trap information is

stored within the switch and is accessible to Telnet and the SNMP agent, and is

persistent between boots. An example of how to access one of these objects

given an IP address of 10.32.165.4 is:

"snmpget localhost public

fcmgmt.trapReg.trapRegTable.trapRegEntry.trapRegFilter.10.32.165.4

.162".

A trap event is reported when the incoming error has a severity level less than or

equal to the configured severity level. The trap event types and trap severity levels

are listed in T a ble 5-28.

Table 5-28. Trap Severity Levels

Event Type

Severity Level

Unknown

Emergency

Alert

Critical

Error

Warning

Notify

Info

Debug

Mark

trapMaxClients (1.3.6.1.3.94.2.1)

The maximum number of SNMP trap recipients supported by the connectivity unit.

Syntax

INTEGER

5-96

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Trap Table

Access

read-only

Status

mandatory

Return Value

Always returns 5.

trapClientCount (1.3.6.1.3.94.2.2)

The current number of rows in the trap table.

Syntax

INTEGER

Access

read-only

Status

mandatory

Return Value

A value (1-5) indicating number of configured trap clients.

trapRegIpAddress (1.3.6.1.3.94.2.3.1.1)

The IP address of a client registered for traps.

Syntax

IpAddress

Access

read-only

Status

mandatory

Return Value

The IP addresses (as defined in the trap table) of where to send traps when

they occur.

59047-09 C

5-97

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Trap Table

trapRegPort (1.3.6.1.3.94.2.3.1.2)

The UDP port to send traps to for this host. Normally this would be the standard

trap port (162). This object is an index and must be specified to create a row in

this table.

Syntax

INTEGER (1..2147483647)

Access

read-only

Status

mandatory

Return Value

The configured port number of where to send traps when they occur. The

port number can be configured in the switch SNMP setup parameters.

Default is 162.

trapRegFilter (1.3.6.1.3.94.2.3.1.3)

This value defines the trap severity filter for this trap host. The connUnit will send

traps to this host that have a severity level less than or equal to this value. The

default value of this object is “warning”.

Syntax

FcEventSeverity

Access

read-write

Status

mandatory

Return Value

A value indicating the trap severity level. Refer to T a ble 5-28 for trap severity

levels.

trapRegRowState (1.3.6.1.3.94.2.3.1.4)

Specifies the state of the row.

„

rowDestroy

‰

READ: Can never happen.

WRITE: Remove this row from the table.

5-98

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Trap Table

„

rowInactive

‰

READ: Indicates that this row does exist, but that traps are not enabled

to be sent to the target.

‰

WRITE: If the row does not exist, and the agent allows writes to the

trap table, then a new row is created. The values of the optional

columns will be set to default values. Traps are not enabled to be sent

to the target. If the row already existed, then traps are disabled from

being sent to the target.

„

rowActive

‰

READ: Indicates that this row exists, and that traps are enabled to be

sent to the target.

‰

WRITE: If the row does not exist, and the agent allows writes to the

trap table, then a new row is created. The values of the optional

columns will be set to default values. Traps are enabled to be sent to

the target. If the row already exists, then traps are enabled to be sent

to the target.

A value of “rowActive” or “rowInactive” must be specified to create a row in

the table.

Syntax

INTEGER {

rowDestroy(1), - Remove row from table.

rowInactive(2), - Row exists, but traps disabled

rowActive(3) - Row exists and is enabled for sending traps

}

Access

read-write

Status

mandatory

Return Value

Returns rowActive (3), if valid entry in trap table.

59047-09 C

5-99

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Related Traps

The following traps contain the trap information being sent from the agent to the

manager.

connUnitStatusChange (1.3.6.1.3.94.0.1)

The overall status of the connectivity unit has changed. The recommended

severity level (for filtering) is “alert”. Sent whenever a Switch.OperChange or

Switch.StateChange event occurs.

Variables: { connUnitStatus, connUnitState }

connUnitDeletedTrap (1.3.6.1.3.94.0.3)

A connUnit has been deleted from this agent. The recommended severity level

(for filtering) is “warning”. Sent whenever an Eport.OperChange event occurs and

the connUnitTable is smaller than previously noted (A connUnit has gone away).

Variables: { connUnitId }

connUnitEventTrap (1.3.6.1.3.94.0.4)

An event has been generated by the connectivity unit. The recommended severity

level (for filtering) is “info”. Sent when a change notification occurs that does not fit

into any other specific category.

Variables:

{ connUnitEventId, connUnitEventType, connUnitEventObject,

connUnitEventDescr }

Figure 5-1 provides the standard format of the connUnitEventDescr variable.

Chassis, Blade, and Port are always 0.

Chassis

Tag #

Port

27; 33; 0; 0; 0; [TimeDate] [Module] [Addr] [Descr]

Event #

Blade

Figure 5-1 connUnitEventDescr Variable Format

T a ble 5-29 lists the fields in the connUnitEventDescr variable.

5-100

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Related Traps

Table 5-29. connUnitEventDescr Variable Field Descriptions

connUnitEventDescr Variable

Description

Tag #

The number that identifies the event.

The event counter.

Event #

Chassis

Blade

The switch on which the event occurred.

The I/O blade on which the event

occurred.

Port

The port on which the event occurred.

The time stamp of the event.

TimeDate

Module

The software module where the event was

initiated.

Addr

The address in the software module where

the event was initiated.

Descr

The description of the event.

T a ble 5-30 lists the trap information returned for the connUnitEventDescr variable.

Table 5-30. Filter Trap Levels

Trap Type

Cause

Filter Level

connUnitPortStatusChange

User port config change

User port state change

E_Port alarm

eventSeverity_info

eventSeverity_critical

connUnitDeletedTrap

connUnitStatusChange

Fabric change and unit

deleted

eventSeverity_info

Switch state change

Switch reset

eventSeverity_info

eventSeverity_critical

59047-09 C

5-101

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Related Traps

Table 5-30. Filter Trap Levels

Trap Type

Cause

Filter Level

connUnitSensorStatusChange Power supply bad alarm

Power supply OK alarm

Fan bad alarm

eventSeverity_critical

Fan OK alarm

Overheat alarm

Overwarm alarm

Temperature OK alarm

connUnitEventTrap

SNMP config change

Switch config change

System config change

Topology change

Zoning change

eventSeverity_info

eventSeverity_critical

eventSeverity_info

eventSeverity_critical

eventSeverity_warning

Zoning merge failure

NameServer change

Generic alarm

Generic event

connUnitSensorStatusChange (1.3.6.1.3.94.0.5)

The overall status of the connectivity unit has changed. The recommended

severity level (for filtering) is “alert”. Sent whenever any of the following

notifications occur:

Chassis.PsBadAlarm

Chassis.PsOkAlarm

Chassis.FanBadAlarm

Chassis.FanOkAlarm

Blade.OverheatAlarm

Blade.OverwarmAlarm

Variables: { connUnitSensorStatus }

connUnitPortStatusChange (1.3.6.1.3.94.0.6)

The overall status of the connectivity unit has changed. The recommended

severity level (for filtering) is “alert”. Sent whenever a UserPort.StateChange or

UserPort.OperChange event occurs.

5-102

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Related Traps

Enterprise: fcmgmt

Variables: { connUnitPortStatus, connUnitPortState }

coldStart

A coldStart trap signifies that the SNMPv2 entity, acting in an agent role, is

re-initializing itself and that its configuration may have been altered.

authenticationFailure

An authenticationFailure trap signifies that the SNMPv2 entity, acting in an agent

role, has received a protocol message that is not properly authenticated. While all

implementations of the SNMPv2 must be capable of generating this trap, the

snmpEnableAuthenTraps object indicates whether this trap will be generated.

59047-09 C

5-103

Download from Www.Somanuals.com. All Manuals Search And Download.

5 – Fibre Alliance MIB Objects

Related Traps

Notes

5-104

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Fabric Element MIB Objects

This section covers the implementation details for the Fabric Element

Management Information Bases (FE-MIB) on the SANbox switch.

Fibre Channel FE MIB Definitions

The textual substitutions in T a ble 6-1 are specific to the FE-MIB and can be used

in place of primitive data types.

Table 6-1. FA-MIB Textual Substitutions

Description

Syntax

MilliSeconds

Unsigned32

MicroSeconds

FcNameId

Unsigned32

OCTET STRING (SIZE (8))

OCTET STRING (SIZE (3))

Integer32 (128..2112)

Integer32 (0..32767)

Integer32 (0..255)

FcAddressId

FcRxDataFieldSize

FcBbCredit

FcphVersion

FcStackedConnMode INTEGER {

none(1),

transparent(2),

lockedDown(3)

}

59047-09 C

6-1

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Configuration Group

Table 6-1. FA-MIB Textual Substitutions

Description

Syntax

FcCosCap

BITS {

classF(0),

class1(1),

class2(2),

class3(3),

class4(4),

class5(5),

class6(6)

}

FcCosCap

BITS {

classF(0),

class1(1),

class2(2),

class3(3),

class4(4),

class5(5),

class6(6)

}

FcFeModuleCapacity Unsigned32

FcFeFxPortCapacity

FcFeModuleIndex

FcFeFxPortIndex

FcFeNxPortIndex

FcBbCreditModel

Unsigned32

Integer32 (1..126)

INTEGER { regular(1), alternate (2) }

Configuration Group

This group consists of scalar objects and tables. It contains the configuration and

service parameters of the Fabric Element and the FxPorts. The group represents

a set of parameters associated with the Fabric Element or an FxPort to support its

NxPorts. The objects described in this section are not in a table format. An

example of how to access one of these objects is:

"snmpget localhost public fcFeFabricName.0".

6-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Configuration Group

fcFeFabricName (1.3.6.1.2.1.75.1.1.1)

The Name_Identifier of the Fabric to which this Fabric Element belongs.

Syntax

FcNameId

Access

read-write

Status

Current

Return Value

The World Wide Name of the principal switch. For example, 10 00 00 C0 DD

00 71 C2. Writes are not supported.

fcFeElementName (1.3.6.1.2.1.75.1.1.2)

The Name_Identifier of the Fabric Element.

Syntax

FcNameId

Access

read-write

Status

Current

Return Value

The World Wide Name of the switch. For example, 10 00 00 C0 DD 00 71

C9. Writes are not supported.

fcFeModuleCapacity (1.3.6.1.2.1.75.1.1.3)

The maximum number of modules in the Fabric Element, regardless of their

current state.

Syntax

FcFeModuleCapacity

Access

read-only

Status

Current

59047-09 C

6-3

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Module Table

Return Value

The total number of switches in the fabric if ProxyEnable setting is Enabled

on the out-of-band switch. If ProxyEnable setting is disabled on the

out-of-band switch, return value = 1.

Module Table

The objects described in this section are in table format indexed by switch. An

example of how to access one of these objects is: "snmpget localhost public

fcFeModuleDescr.1". This table contains one entry for each module.

fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2)

A textual description of the module. This value should include the full name and

version identification of the module.

Syntax

SnmpAdminString

Access

read-only

Status

current

Return Value

A configuration description of the module table entry. The defaults are:

SANbox 5200 = SANbox 5200 FC Switch, SANbox 5202 = SANbox 5202

FC Switch, SANbox 5600 = SANbox 5600 FC Switch, SANbox 5602 =

SANbox 5602 FC Switch

fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3)

The vendor's authoritative identification of the module. This value may be

allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides a means

for determining what kind of module is being managed.

For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor

“Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the

identifier 1.3.6.1.4.1.99649.3.9 to its FeFiFo-16 PlugInCard.

Syntax

OBJECT IDENTIFIER

Access

read-only

6-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Module Table

Status

current

Return Value

The module identification numbers are: SANbox 5200 =

1.3.6.1.4.1.1663.1.1.1.1.17, SANbox 5202 = 1.3.6.1.4.1.1663.1.1.1.1.30,

SANbox 5600 = 1.3.6.1.4.1.1663.1.1.1.1.23, SANbox 5602 =

1.3.6.1.4.1.1663.1.1.1.1.24

fcFeModuleOperStatus (1.3.6.1.2.1.75.1.1.4.1.4)

Switch definitions map 1-to-1 with the MIB definitions. This object indicates the

operational status of the module.

„

online (1) - the module is functioning properly

offline (2) - the module is not available

testing (3) - the module is under testing

faulty (4) - the module is defective in some way

Syntax

INTEGER {

online(1), - functional

offline(2), - not available

testing(3), - under testing

faulty(4) - defective

}

Access

read-only

Status

Current

Return Value

The operational status of that module.

Table 6-2. Module Operational Status Return Values

Mode Return Value

online

online(1)

offline(2)

testing(3)

offline

diagnostics

59047-09 C

6-5

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Module Table

Table 6-2. Module Operational Status Return Values

Mode

Return Value

other

faulty(4)

fcFeModuleLastChange (1.3.6.1.2.1.75.1.1.4.1.5)

This object contains the value of sysUpTime when the module entered its current

operational status. A value of zero indicates that the operational status of the

module has not changed since the agent last restarted.

Syntax

TimeStamp

Access

read-only

Status

Current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFeModuleFxPortCapacity (1.3.6.1.2.1.75.1.1.4.1.6)

The number of FxPort that can be contained within the module. Within each

module, the ports are uniquely numbered in the range from 1 to

fcFeModuleFxPortCapacity inclusive. However, the numbers are not required to

be contiguous.

Syntax

FcFeFxPortCapacity

Access

read-only

Status

current

Return Value

The total number of ports capability on the switch. SANbox 5200/5600

Series = 1 - 8, 12, 16, 20 (varies depending on number of licensed ports)

fcFeModuleName (1.3.6.1.2.1.75.1.1.4.1.7)

The Name_Identifier of the switch.

6-6

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

FxPort Configuration Table

Syntax

FcNameId

Access

read-write

Status

current

Return Value

The World Wide Name of the switch. Writes are not supported. For example,

10 00 00 C0 DD 00 71 C9.

FxPort Configuration Table

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: snmpget

localhost public fcFxPortName.1.1. This table contains one entry for each FxPort

and Configuration parameters of the ports. This table contains, one entry for each

FxPort, configuration parameters of the ports.

fcFxPortName (1.3.6.1.2.1.75.1.1.5.1.2)

The World Wide Name of this FxPort. Each FxPort has a unique Port World Wide

Name within the Fabric.

Syntax

FcNameId

Access

read-only

Status

current

Return Value

Returns the Port World Wide Name for each port on switch. For example,

the return value for port #2 would be 20 02 00 C0 DD 00 71 C9, and the

return value for port #14 would be 20 0E 00 C0 DD 00 71 C9.

fcFxPortFcphVersionHigh (1.3.6.1.2.1.75.1.1.5.1.3)

The highest or most recent version of FC-PH that the FxPort is configured to

support.

59047-09 C

6-7

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

FxPort Configuration Table

Syntax

FcphVersion

Access

read-only

Status

Current

Return Value

Always returns 32 (0x20).

fcFxPortFcphVersionLow (1.3.6.1.2.1.75.1.1.5.1.4)

The lowest or earliest version of FC-PH that the FxPort is configured to support.

Syntax

FcphVersion

Access

read-only

Status

current

Return Value

Always returns 9.

fcFxPortBbCredit (1.3.6.1.2.1.75.1.1.5.1.5)

The total number of receive buffers available for holding Class 1 connect-request,

Class 2, or Class3 frames from the attached NxPort. It is for buffer-to-buffer flow

control in the direction from the attached NxPort (if applicable) to FxPort.

Syntax

FcBbCredit

Access

read-only

Status

current

Return Value

The default number of receive buffers for each port, unless extended credits

are used. SANbox 5200/5600 Series = 16

6-8

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

FxPort Configuration Table

fcFxPortRxBufSize (1.3.6.1.2.1.75.1.1.5.1.6)

The largest Data_Field Size (in octets) for an FT_1 frame that can be received by

the FxPort.

Syntax

FcRxDataFieldSize

Access

read-only

Status

current

Return Value

Always returns 2112 (0x840).

fcFxPortRatov (1.3.6.1.2.1.75.1.1.5.1.7)

The Resource_Allocation_Timeout Value configured for the FxPort. This is used

as the timeout value for determining when to reuse an NxPort resource such as a

Recovery_Qualifier. It represents E_D_TOV plus twice the maximum time that a

frame may be delayed within the fabric and still be delivered. Refer to

“fcFxPortEdtov (1.3.6.1.2.1.75.1.1.5.1.8)” on page 6-9 for more information.

Syntax

MilliSeconds

Access

read-only

Status

Current

Return Value

The default is: 10000 (0x2710).

fcFxPortEdtov (1.3.6.1.2.1.75.1.1.5.1.8)

The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value

is used as the timeout value for detecting an error condition.

Syntax

MilliSeconds

Access

read-only

59047-09 C

6-9

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

FxPort Configuration Table

Status

current

Return Value

The default is: 2000 (0x7D0).

fcFxPortCosSupported (1.3.6.1.2.1.75.1.1.5.1.9)

A value indicating the set of classes of service supported by the FxPort.

Syntax

FcCosCap

Access

read-only

Status

Current

Return Value

Always returns Class 3, 2, and F (0x0D).

fcFxPortIntermixSupported (1.3.6.1.2.1.75.1.1.5.1.10)

A flag indicating whether or not the FxPort supports an Intermixed Dedicated

Connection.

Syntax

TruthValue

Access

read-only

Status

current

Return Value

Always returns False (2).

fcFxPortStackedConnMode (1.3.6.1.2.1.75.1.1.5.1.11)

A value indicating the mode of Stacked Connect supported by the FxPort.

Syntax

FcStackedConnMode

6-10

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

FxPort Configuration Table

Access

read-only

Status

current

Return Value

Always returns None (1).

fcFxPortClass2SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.12)

A flag indicating whether or not Class 2 Sequential Delivery is supported by the

FxPort.

Syntax

TruthValue

Access

read-only

Status

current

Return Value

Always returns True (1).

fcFxPortClass3SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.13)

A flag indicating whether or not Class 3 Sequential Delivery is supported by the

FxPort.

Syntax

TruthValue

Access

read-only

Status

current

Return Value

Always returns True (1).

59047-09 C

6-11

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

The Status Group

fcFxPortHoldTime (1.3.6.1.2.1.75.1.1.5.1.14)

The maximum time, in microseconds, that the FxPort shall hold a frame before

discarding the frame if it is unable to deliver the frame. The value 0 means that the

FxPort does not support this parameter.

Syntax

MicroSeconds

Access

read-only

Status

current

Return Value

The default ED_TOV parameter is: 2000 (0x7D0).

The Status Group

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: "snmpget

localhost public fcFxPortId.1.1". This group consists of tables that contain

operational status and established service parameters for the Fabric Element and

the attached NxPorts.

This group consists of tables that contains operational status and established

service parameters for the Fabric Element and the attached NxPorts. This table

contains one entry for each FxPort, and the operational status and parameters of

the FxPorts.

fcFxPortID (1.3.6.1.2.1.75.1.2.1.1.1)

The address identifier by which this FxPort is identified within the fabric. The

FxPort may assign its address identifier to its attached NxPort(s) during Fabric

Syntax

FcAddressId

Access

read-only

Status

current

6-12

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

The Status Group

Return Value

The address of each port based on Domain, Area, and ALPA. Example, 64

03 00.

fcFxPortBbCreditAvailable (1.3.6.1.2.1.75.1.2.1.1.2)

The number of buffers currently available for receiving frames from the attached

port in the buffer-to-buffer flow control. The value should be less than or equal to

fcFxPortBbCredit.

Syntax

Gauge32

Access

read-only

Status

Current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortOperMode (1.3.6.1.2.1.75.1.2.1.1.3)

The current operational mode of the FxPort.

Syntax

INTEGER { unknown(1), fPort(2), flPort(3) }

Access

read-only

Status

current

Return Value

Refer to T a ble 6-3 for fcFxPortOperMode return values.

Table 6-3. Port Operational Modes

Mode

Return Value

Unknown

F_Port

FL_Port

59047-09 C

6-13

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

FxPort Physical Level Table

fcFxPortAdminMode (1.3.6.1.2.1.75.1.2.1.1.4)

The desired operational mode of the FxPort.

Syntax

INTEGER { fPort(2), flPort(3) }

Access

read-write

Status

Current

Return Value

Unsupported. Always returns error status 'NoSuchName'.

FxPort Physical Level Table

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: "snmpget

localhost public fcFxPortPhysAdminStatus.1.1". This table contains one entry for

each FxPort in the Fabric Element, the physical level status, and parameters of

the FxPorts.

This table contains one entry for each FxPort in the Fabric Element, and the

physical level status and parameters of the FxPorts.

fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1)

The desired state of the FxPort. A management station may place the FxPort in a

desired state by setting this object accordingly. The testing(3) state indicates that

no operational frames can be passed. When a Fabric Element initializes, all

FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of

either explicit management action or per configuration information accessible by

the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the

online(1) or testing(3) states, or remains in the offline state.

Syntax

INTEGER {

online(1), - place port online

offline(2), - take port offline

testing(3) - initiate test procedures

}

Access

read-write

6-14

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

FxPort Physical Level Table

Status

current

Return Value

Refer to T a ble 6-4 for fcFxPortPhysAdminStatus read values.

Table 6-4. fcFxPortPhysAdminStatus Read Return Values

Port Value

Online

online (1)

offline (2)

testing (3)

offline (2)

Offline

Diagnostics

Down

Refer to T a ble 6-5 for fcFxPortPhysAdminStatus write values.

Table 6-5. fcFxPortPhysAdminStatus Write Values

Port

Value

Online

online (1)

offline (2)

testing (3)

Offline

Diagnostics

fcFxPortPhysOperStatus (1.3.6.1.2.1.75.1.2.2.1.2)

The current operational status of the FxPort. The testing(3) indicates that no

operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2), then

fcFxPortPhysOperStatus should be offline(2). If fcFxPortPhysAdminStatus is

changed to online(1), then fcFxPortPhysOperStatus should change to online(1). If

the FxPort is ready to accept Fabric Login request from the attached NxPort, it

should proceed and remain in the link- failure(4) state if, and only if, there is a fault

that prevents it from going to the online(1) state.

Syntax

INTEGER {

online(1), - Login may proceed

offline(2), - Login cannot proceed

testing(3), - port is under test

linkFailure(4) - failure after online/testing

}

59047-09 C

6-15

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

FxPort Physical Level Table

Access

read-only

Status

current

Return Value

Refer to T a ble 6-6 for fcFxPortPhysOperStatus return values.

Table 6-6. fcFxPortPHysOperStatus Return Values

Status Return Value

Online

online (1)

Offline

offline (2)

Diagnostic

Down

testing (3)

linkfailure (4)

fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3)

The value of sysUpTime at the time the FxPort entered its current operational

status. A value of zero indicates that the FxPort's operational status has not

changed since the agent last restarted.

Syntax

TimeStamp

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortPhysRttov (1.3.6.1.2.1.75.1.2.2.1.4)

The Receiver_Transmitter_Timeout value of the FxPort. This is used by the

receiver logic to detect a loss of synchronization.

Syntax

Milliseconds

6-16

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Fx Port Fabric Login Table

Access

read-write

Status

current

Return Value

The default RT_TOV parameter is: 100 (0x64). This is a global setting for the

switch. If writing value to a port, all ports will reflect this new value.

Fx Port Fabric Login Table

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: "snmpget

localhost public fcFxPortFcphVersionAgreed.1.1". This table contains one entry

for each FxPort in the fabric element and the service parameters that have been

established from the most recent Fabric Login (implicit or explicit).

This table contains one entry for each FxPort in the fabric element, and the

service parameters that have been established from the most recent Fabric Login,

implicit or explicit.

fcFxPortFcphVersionAgreed (1.3.6.1.2.1.75.1.2.3.1.2)

The version of FC-PH that the FxPort has agreed to support from the Fabric

Syntax

FcphVersion

Access

read-only

Status

current

Return Value

Unsupported.

fcFxPortNxPortBbCredit (1.3.6.1.2.1.75.1.2.3.1.3)

The total number of buffers available for holding class 1 connect-request, class 2,

or class 3 frames to be transmitted to the attached NxPort. It is for buffer-to-buffer

flow control in the direction from FxPort to NxPort. The buffer-to-buffer flow control

mechanism is indicated in the respective fcFxPortBbCreditModel.

59047-09 C

6-17

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Fx Port Fabric Login Table

Syntax

FcBbCredit

Access

read-only

Status

current

Return Value

Unsupported.

fcFxPortNxPortRxDataFieldSize (1.3.6.1.2.1.75.1.2.3.1.4)

The Receive Data Field Size of the attached NxPort. This object specifies the

largest Data Field Size for an FT_1 frame that can be received by the NxPort.

Syntax

FcRxDataFieldSize

Access

read-only

Status

current

Return Value

Unsupported.

fcFxPortCosSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.5)

A variable indicating that the attached NxPort has requested the FxPort for the

support of classes of services and the FxPort has granted the request.

Syntax

FcCosCap

Access

read-only

Status

current

6-18

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Fx Port Fabric Login Table

Return Value

The bits have the following bit-mapped definition:

Bit 7 Class-six

Bit 6 Class-five

Bit 5 Class-four

Bit 4 Class-three

Bit 3 Class-two

Bit 2 Class-one

Bit 1 Class F

For example: If Class 3, return value 0x10.

fcFxPortIntermixSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.6)

A variable indicating that the attached NxPort has requested the FxPort for the

support of Intermix and the FxPort has granted the request. This flag is only valid

if Class 1 service is supported.

Syntax

TruthValue

Access

read-only

Status

current

Return Value

Always returns false (2).

fcFxPortStackedConnModeAgreed (1.3.6.1.2.1.75.1.2.3.1.7)

A variable indicating whether the FxPort has agreed to support stacked connect

from the Fabric Login. This is only meaningful if the ports are using Class 1

service.

Syntax

FcStackedConnMode

59047-09 C

6-19

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Fx Port Fabric Login Table

Access

read-only

Status

current

Return Value

Always returns none (1).

fcFxPortClass2SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.8)

A variable indicating whether the FxPort has agreed to support Class 2 sequential

delivery from the Fabric Login. This is only meaningful if the ports are using Class

2 service.

Syntax

TruthValue

Access

read-only

Status

Current

Return Value

Always returns true (1).

fcFxPortClass3SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.9)

A flag indicating whether the FxPort has agreed to support Class 3 sequential

delivery from the Fabric Login. This is only meaningful if the ports are using Class

3 service.

Syntax

TruthValue

Access

read-only

Status

current

Return Value

Always returns true (1).

6-20

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Fx Port Fabric Login Table

fcFxPortNxPortName (1.3.6.1.2.1.75.1.2.3.1.10)

The port name of the attached NxPort.

Syntax

FcNameId

Access

read-only

Status

Current

Return Value

Returns the Switch Port's Port World Wide Name for the attached device.

fcFxPortConnectedNxPort (1.3.6.1.2.1.75.1.2.3.1.11)

The address identifier of the destination NxPort with which this FxPort is currently

engaged in a either a Class 1 or loop connection. If this FxPort is not engaged in a

connection, then the value of this object is “000000”H.

Syntax

FcAddressId

Access

read-only

Status

Current

Return Value

Unsupported.

fcFxPortBbCreditModel (1.3.6.1.2.1.75.1.2.3.1.12)

This object identifies the BB_Credit model used by the FxPort.

Syntax

FcBbCreditModel

Access

read-write

Status

current

59047-09 C

6-21

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

The Error Group

Return Value

Returns alternate (2). Writes not supported.

The Error Group

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: "snmpget

localhost public fcFxPortLinkFailures.1.1". This group consists of tables that

contain information about the various types of errors detected. The management

station may use the information in this group to determine the quality of the link

between the FxPort and its attached NxPort.

The FxPort Error table contains, one entry for each FxPort in the Fabric Element,

counters recording numbers of errors detected since the management agent

re-initialized. The first 6 columnar objects after the port index corresponds to the

counters in the Link Error Status Block.

fcFxPortLinkFailures (1.3.6.1.2.1.75.1.3.1.1.1)

The number of link failures detected by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of LinkFailures encountered for a port.

fcFxPortSyncLosses (1.3.6.1.2.1.75.1.3.1.1.2)

The number of loss of synchronizations detected by the FxPort.

Syntax

Counter32

Access

read-only

Status

current

6-22

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

The Error Group

Return Value

The total number of LossOfSyncs encountered for a port.

fcFxPortSigLosses (1.3.6.1.2.1.75.1.3.1.1.3)

The number of loss of signals detected by the FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortPrimSeqProtoErrors (1.3.6.1.2.1.75.1.3.1.1.4)

The number of primitive sequence protocol errors detected by the FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of PrimSeqErrors encountered for a port.

fcFxPortInvalidTxWords (1.3.6.1.2.1.75.1.3.1.1.5)

The number of invalid transmission words detected by the FxPort.

Syntax

Counter32

Access

read-only

Status

current

59047-09 C

6-23

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

The Error Group

Return Value

The total number of DecodeErrors encountered for a port.

fcFxPortInvalidCrcs (1.3.6.1.2.1.75.1.3.1.1.6)

The number of invalid CRCs detected by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of InvalidCRCs encountered for a port.

fcFxPortDelimiterErrors (1.3.6.1.2.1.75.1.3.1.1.7)

The number of Delimiter Errors detected by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortAddressIdErrors (1.3.6.1.2.1.75.1.3.1.1.8)

The number of address identifier errors detected by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

6-24

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

The Error Group

Return Value

The total number of InvDestAddrs encountered for a port.

fcFxPortLinkResetIns (1.3.6.1.2.1.75.1.3.1.1.9)

The number of Link Reset Protocols received by this FxPort from the attached

NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of RxLinkResets received by a port.

fcFxPortLinkResetOuts (1.3.6.1.2.1.75.1.3.1.1.10)

The number of Link Reset Protocols issued by this FxPort to the attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of TxLinkResets sent by a port.

fcFxPortOlsIns (1.3.6.1.2.1.75.1.3.1.1.11)

The number of Offline Sequences received by this FxPort.

Syntax

Counter32

Access

read-only

59047-09 C

6-25

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Accounting Groups

Status

current

Return Value

The total number of RxOfflineSeqs received by a port.

fcFxPortOlsOuts (1.3.6.1.2.1.75.1.3.1.1.12)

The number of Offline Sequences issued by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of TxOflineSeqs sent by a port.

Accounting Groups

Each group consists of a table that contains accounting information for the

FxPorts in the Fabric Element: Class 1 Accounting Group, Class 2 Accounting

Group, and Class 3 Accounting Group.

Class 1 Accounting Table

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: "snmpget

localhost public fcFxPortC1InFrames.1.1". This table contains one entry for each

FxPort in the Fabric Element and Counter32s for certain types of events that have

occurred in the FxPorts since the management agent was re-initialized.

fcFxPortC1InFrames (1.3.6.1.2.1.75.1.4.1.1.1)

The number of Class 1 frames (other than Class 1 connect-request) received by

this FxPort from its attached NxPort.

Syntax

Counter32

Access

read-only

6-26

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Accounting Groups

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortC1OutFrames (1.3.6.1.2.1.75.1.4.1.1.2)

The number of Class 1 frames (other than Class 1 connect- request) delivered

through this FxPort to its attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortC1InOctets (1.3.6.1.2.1.75.1.4.1.1.3)

The number of Class 1 frame octets, including the frame delimiters, received by

this FxPort from its attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortC1OutOctets (1.3.6.1.2.1.75.1.4.1.1.4)

The number of Class 1 frame octets, including the frame delimiters, delivered

through this FxPort its attached NxPort.

Syntax

Counter32

59047-09 C

6-27

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Accounting Groups

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortC1Discards (1.3.6.1.2.1.75.1.4.1.1.5)

The number of Class 1 frames discarded by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortC1FbsyFrames (1.3.6.1.2.1.75.1.4.1.1.6)

The number of F_BSY frames generated by this FxPort against Class 1

connect-request.

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortC1FrjtFrames (1.3.6.1.2.1.75.1.4.1.1.7)

The number of F_RJT frames generated by this FxPort against Class 1

connect-request.

6-28

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Accounting Groups

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortC1InConnections (1.3.6.1.2.1.75.1.4.1.1.8)

The number of Class 1 connections successfully established in which the

attached NxPort is the source of the connect-request.

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

fcFxPortC1OutConnections (1.3.6.1.2.1.75.1.4.1.1.9)

The number of Class 1 connections successfully established in which the

attached NxPort is the destination of the connect-request.

Syntax

Counter32

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

59047-09 C

6-29

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Class 2 Accounting Table

fcFxPortC1ConnTime (1.3.6.1.2.1.75.1.4.1.1.10)

The cumulative time that this FxPort has been engaged in Class 1 connection.

The amount of time is counted from after a connect-request has been accepted

until the connection is disengaged, either by an EOFdt or Link Reset.

Syntax

Milliseconds

Access

read-only

Status

current

Return Value

Unsupported. Always returns error status "NoSuchName".

Class 2 Accounting Table

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: "snmpget

localhost public fcFxPortC2InFrames.1.1". This table contains one entry for each

FxPort in the Fabric Element and Counter32s for certain types of events that have

occurred in the FxPorts since the management agent was re-initialized.

fcFxPortC2InFrames (1.3.6.1.2.1.75.1.4.2.1.1)

The number of Class 2 frames received by this FxPort from its attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class2FramesIn received by a port.

fcFxPortC2OutFrames (1.3.6.1.2.1.75.1.4.2.1.2)

The number of Class 2 frames delivered through this FxPort to its attached

NxPort.

6-30

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Class 2 Accounting Table

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class2FramesOut sent by a port.

fcFxPortC2InOctets (1.3.6.1.2.1.75.1.4.2.1.3)

The number of Class 2 frame octets, including the frame delimiters, received by

this FxPort from its attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class2WordsIn received by a port.

fcFxPortC2OutOctets (1.3.6.1.2.1.75.1.4.2.1.4)

The number of Class 2 frame octets, including the frame delimiters, delivered

through this FxPort to its attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class2WordsOut sent by a port.

59047-09 C

6-31

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Class 2 Accounting Table

fcFxPortC2Discards (1.3.6.1.2.1.75.1.4.2.1.5)

The number of Class 2 frames discarded by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class2Toss discarded by a port.

fcFxPortC2FbsyFrames (1.3.6.1.2.1.75.1.4.2.1.6)

The number of F_BSY frames generated by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of FBusy frames generated by this port for Class 2 and 3

frames.

fcFxPortC2FrjtFrames (1.3.6.1.2.1.75.1.4.2.1.7)

The number of F_RJT frames generated by this FxPort against Class 2 frames.

Syntax

Counter32

Access

read-only

Status

current

6-32

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Class 3 Accounting Table

Return Value

The total number of FReject frames generated by this port for Class 2 and 3

frames.

Class 3 Accounting Table

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: "snmpget

localhost public fcFxPortC3InFrames.1.1". This table contains one entry for each

FxPort in the Fabric Element and Counter32s for certain types of events that have

occurred in the FxPorts since the management agent has re-initialized.

fcFxPortC3InFrames (1.3.6.1.2.1.75.1.4.3.1.1)

The number of Class 3 frames received by this FxPort from its attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class3FramesIn received by a port.

fcFxPortC3OutFrames (1.3.6.1.2.1.75.1.4.3.1.2)

The number of Class 3 frames delivered through this FxPort to its attached

NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class3FramesOut sent by a port.

59047-09 C

6-33

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Class 3 Accounting Table

fcFxPortC3InOctets (1.3.6.1.2.1.75.1.4.3.1.3)

The number of Class 3 frame octets, including the frame delimiters, received by

this FxPort from its attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class3WordsOut received by a port.

fcFxPortC3OutOctets (1.3.6.1.2.1.75.1.4.3.1.4)

The number of Class 3 frame octets, including the frame delimiters, delivered

through this FxPort to its attached NxPort.

Syntax

Counter32

Access

read-only

Status

current

Return Value

The total number of Class3WordsOut sent by a port.

fcFxPortC3Discards (1.3.6.1.2.1.75.1.4.3.1.5)

The number of Class 3 frames discarded by this FxPort.

Syntax

Counter32

Access

read-only

Status

current

6-34

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Capability Group

Return Value

The total number of Class3Toss discarded by a port.

Capability Group

The objects described in this section are in table format indexed by switch index

and port index. An example of how to access one of these objects is: "snmpget

localhost public fcFxPortName.1.1". The Capability Group consists of a table

describing information about what each FxPort is inherently capable of operating

or supporting. A capability may be used as expressed in its respective object

value in the Configuration group.

fcFxPortCapFcphVersionHigh (1.3.6.1.2.1.75.1.5.1.1.1)

The highest or most recent version of FC-PH that the FxPort is capable of

supporting.

Syntax

FcphVersion

Access

read-only

Status

current

Return Value

Always returns 32 (0x20).

fcFxPortCapFcphVersionLow (1.3.6.1.2.1.75.1.5.1.1.2)

The lowest or earliest version of FC-PH that the FxPort is capable of supporting.

Syntax

FcphVersion

Access

read-only

Status

current

Return Value

Always returns 9.

59047-09 C

6-35

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Capability Group

fcFxPortCapBbCreditMax (1.3.6.1.2.1.75.1.5.1.1.3)

The maximum number of receive buffers available for holding Class 1

connect-request, Class 2, or Class 3 frames from the attached NxPort.

Syntax

FcBbCredit

Access

read-only

Status

current

Return Value

The default is: 255 (0xFF).

fcFxPortCapBbCreditMin (1.3.6.1.2.1.75.1.5.1.1.4)

The minimum number of receive buffers available for holding Class 1

connect-request, Class 2, or Class 3 frames from the attached NxPort.

Syntax

FcBbCredit

Access

read-only

Status

current

Return Value

The default is: 0 (0x00).

fcFxPortCapRxDataFieldSizeMax (1.3.6.1.2.1.75.1.5.1.1.5)

The maximum size in bytes of the Data Field in a frame that the FxPort is capable

of receiving from its attached NxPort.

Syntax

FcRxDataFieldSize

Access

read-only

Status

current

6-36

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Capability Group

Return Value

2112 (0x840).

fcFxPortCapRxDataFieldSizeMin (1.3.6.1.2.1.75.1.5.1.1.6)

The minimum size in bytes of the Data Field in a frame that the FxPort is capable

of receiving from its attached NxPort.

Syntax

FcRxDataFieldSize

Access

read-only

Status

current

Return Value

128 (0x80).

fcFxPortCapCos (1.3.6.1.2.1.75.1.5.1.1.7)

A value indicating the set of classes of service that the FxPort is capable of

supporting.

Syntax

FcCosCap

Access

read-only

Status

current

Return Value

Always returns Class F, 2, and 3 (0x0d).

fcFxPortCapIntermix (1.3.6.1.2.1.75.1.5.1.1.8)

A flag indicating whether or not the FxPort is capable of supporting the intermixing

of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid

if the port is capable of supporting Class 1 service.

Syntax

TruthValue

59047-09 C

6-37

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Capability Group

Access

read-only

Status

current

Return Value

Always returns False (2).

fcFxPortCapStackedConnMode (1.3.6.1.2.1.75.1.5.1.1.9)

A value indicating the mode of Stacked Connect request that the FxPort is

capable of supporting.

Syntax

FcStackedConnMode

Access

read-only

Status

current

Return Value

Always returns None (1).

fcFxPortCapClass2SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.10)

A flag indicating whether or not the FxPort is capable of supporting Class 2

Sequential Delivery.

Syntax

TruthValue

Access

read-only

Status

current

Return Value

Always returns true (1).

fcFxPortCapClass3SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.11)

A flag indicating whether or not the FxPort is capable of supporting Class 3

Sequential Delivery.

6-38

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Capability Group

Syntax

TruthValue

Access

read-only

Status

current

Return Value

Always returns true (1).

fcFxPortCapHoldTimeMaxv (1.3.6.1.2.1.75.1.5.1.1.12)

The maximum holding time that the FxPort is capable of supporting, in

microseconds.

Syntax

MicroSeconds

Access

read-only

Status

current

Return Value

20000 (0x4E20)

fcFxPortCapHoldTimeMin (1.3.6.1.2.1.75.1.5.1.1.13)

The minimum holding time that the FxPort is capable of supporting, in

microseconds.

Syntax

MicroSeconds

Access

read-only

Status

current

Return Value

10 (0x0A)

59047-09 C

6-39

Download from Www.Somanuals.com. All Manuals Search And Download.

6 – Fabric Element MIB Objects

Capability Group

Notes

6-40

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

7 QLOGIC MIB Objects

This section covers the implementation details for the QLOGIC Management

Information Bases (QLOGIC-MIB) on the SANbox switch.

QLOGIC MIB Definitions

This MIB replaces the fcFxPortPhysTable module defined in

FIBRE-CHANNEL-FE-MIB, and defines volatile control objects for ports in a

QLogic SANbox switch. If the switch gets reset, these values revert back to the

default values in the configuration file.

fcQxPortPhysAdminStatus (1.3.6.1.4.1.1663.1.3.10.1.1.3)

The desired state of the FxPort. A management station may place the FxPort in a

desired state by setting this object accordingly. The testing(3) state indicates that

no operational frames can be passed. When a Fabric Element initializes, all

FxPorts start with fcQxPortPhysAdminStatus in the offline(2) state. As the result of

either explicit management action or per configuration information accessible by

the Fabric Element, fcQxPortPhysAdminStatus is then changed to either the

online(1) or testing(3) states, or remains in the offline state.

Syntax

INTEGER {

online(1), - place port online

offline(2), - take port offline

testing(3) - initiate test procedures

}

Access

read-write

Status

current

Return Value

Refer to T a ble 7-1 for fcQxPortPhysAdminStatus read values.

59047-09 C

7-1

Download from Www.Somanuals.com. All Manuals Search And Download.

7 – QLOGIC MIB Objects

QLOGIC MIB Definitions

Table 7-1. fcQxPortPhysAdminStatus Read Return Values

Port Value

Online

Offline

online (1)

offline (2)

testing (3)

offline (2)

Diagnostics

Down

Refer to T a ble 7-2 for fcQxPortPhysAdminStatus write values.

Table 7-2. fcQxPortPhysAdminStatus Write Values

Port

Value

Online

online (1)

offline (2)

testing (3)

Offline

Diagnostics

fcQxPortPhysOperStatus (1.3.6.1.4.1.1663.1.3.10.1.1.4)

The current operational status of the FxPort. The testing(3) indicates that no

operational frames can be passed. If fcQxPortPhysAdminStatus is offline(2), then

fcQxPortPhysOperStatus should be offline(2). If fcQxPortPhysAdminStatus is

changed to online(1), then fcQxPortPhysOperStatus should change to online(1). If

the FxPort is ready to accept Fabric Login request from the attached NxPort, it

should proceed and remain in the link- failure(4) state if, and only if, there is a fault

that prevents it from going to the online(1) state.

Syntax

INTEGER {

online(1), - Login may proceed

offline(2), - Login cannot proceed

testing(3), - port is under test

linkFailure(4) - failure after online/testing

}

Access

read-only

Status

current

7-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

7 – QLOGIC MIB Objects

Related Traps

Return Value

Refer to T a ble 7-3 for fcQxPortPhysOperStatus return values.

Table 7-3. fcFxPortPHysOperStatus Return Values

Status Return Value

Online

online (1)

Offline

offline (2)

Diagnostic

Down

testing (3)

linkfailure (4)

Related Traps

The following traps contain the trap information being sent from the agent to the

manager.

qlSB2PortLinkDown (qLogicExperimental 0 10)

A linkDown trap signifies that the SNMP entity, acting in an agent role, has

detected that the fcQxPortPhysOperStatus object for one of its communication

links has left the online state and transitioned to some other state. The current

state is indicated by the included value of fcQxPortPhysOperStatus.

Variables:

{ fcQxPortPhysAdminStatus, fcQxPortPhysOperStatus }

qlSB2PortLinkUp (qLogicExperimental 0 11)

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected

that the fcQxPortPhysOperStatus object for one of its communication links has

entered the online state from some other state. The current state is indicated by

the included value of fcQxPortPhysOperStatus.

Variables:

{ fcQxPortPhysAdminStatus, fcQxPortPhysOperStatus }

qlconnUnitAddedTrap (qLogicExperimental 0 12)

A connUnit has been aded to this agent.

Variables:

{ connUnitId }

59047-09 C

7-3

Download from Www.Somanuals.com. All Manuals Search And Download.

7 – QLOGIC MIB Objects

Related Traps

Notes

7-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Firmware Download MIB

Objects

This section covers the implementation details for the Firmware Download

Management Information Bases (FD-MIB) on the SANbox switch.

Firmware Download MIB Definitions

The FD-MIB enables you to download, install, and activate new firmware on

QLogic SANbox switches using the Trivial File Transfer Protocol (TFTP). The

downloaded firmware can be activated using a hot reset (non-disruptive) or a hard

reset (disruptive).

A hot reset is a Non-Disruptive Code Load Activation (NDCLA) operation. The

firmware will be activated, the switch will be reset without a Power On Self Test,

and switch traffic will not be disrupted. The switch does not need to be rebooted

after the firmware is activated. During a hotreset operation, fabric services will be

unavailable for a short period (30-75 seconds depending on switch model). To

ensure that the NDCLA operation is successful, verify that all administrative

changes to the fabric (if any) are complete. When you need to do NDCLA/hotreset

to multiple switches, only perform the NDCLA/hotreset on one switch at a time,

and wait 75 seconds before performing the NDCLA/hotreset operation on the next

switch.

A hard reset is a Normal (or regular) reset operation. The firmware will be

activated, the switch will be reset with a Power On Self Test, and switch traffic will

be disrupted. The switch must be rebooted after the firmware is activated.

qlgcChFwOpResult (1.3.6.1.4.1.3873.3.1.1.2.1)

The status of the last firmware download and/or installation attempt.

Syntax

OBJECT IDENTIFIER

Access

read-only

59047-09 C

8-1

Download from Www.Somanuals.com. All Manuals Search And Download.

8 – Firmware Download MIB Objects

Firmware Download MIB Definitions

Status

Current

Return Value

Returns the following:

DownloadNoError: 1.3.6.1.4.1.3873.3.1.1.1.1.1,

DownloadHostError: 1.3.6.1.4.1.3873.3.1.1.1.1.2,

DownloadFileError: 1.3.6.1.4.1.3873.3.1.1.1.1.3,

InstallNoError: 1.3.6.1.4.1.3873.3.1.1.1.2.1,

InstallFileError: 1.3.6.1.4.1.3873.3.1.1.1.2.2,

InstallFileErrorNoAdmin: 1.3.6.1.4.1.3873.3.1.1.1.2.3,

ResetNoError: 1.3.6.1.4.1.3873.3.1.1.1.3.1,

ResetNoErr: 1.3.6.1.4.1.3873.3.1.1.1.3.2,

ResetNoAdmin: 1.3.6.1.4.1.3873.3.1.1.1.3.3

qlgcChFwOpRequest (1.3.6.1.4.1.3873.3.1.1.2.2)

Starts the operation to download/install firmware, and/or reset the switch.

Syntax

INTEGER {

(1) - auto (downloads, installs, and resets the switch)

(2) - downloadOnly

(3) - installOnly

(4) - resetOnly

}

Access

read-write

Status

current

qlgcChFwDwldHostAddrType (1.3.6.1.4.1.3873.3.1.1.2.3)

The type of the IP address from which the firmware file is accessed.

Syntax

INTEGER

Access

read-write

Status

current

8-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

8 – Firmware Download MIB Objects

Firmware Download MIB Definitions

qlgcChFwDwldHostAddr (1.3.6.1.4.1.3873.3.1.1.2.4)

The IP address from which the firmware file is accessed.

Syntax

IP ADDRESS

Access

read-write

Status

current

qlgcChFwDwldHostPort (1.3.6.1.4.1.3873.3.1.1.2.5)

The port number (defaults is 69) used to transfer the firmware file.

Syntax

INTEGER

Access

read-write

Status

current

qlgcChFwDwldPathName (1.3.6.1.4.1.3873.3.1.1.2.6)

The full directory name on the server where the firmware file is located. If the

firmware file to be downloaded is in a subdirectory, setting this path name to the

name of that subdirectory is required.

Syntax

DisplayString

Access

read-write

Status

current

qlgcChFwDwldFileName (1.3.6.1.4.1.3873.3.1.1.2.7)

The filename of the firmware being transferred.

Syntax

DisplayString

59047-09 C

8-3

Download from Www.Somanuals.com. All Manuals Search And Download.

8 – Firmware Download MIB Objects

Firmware Download MIB Definitions

Access

read-write

Status

current

qlgcChFwResetMethod (1.3.6.1.4.1.3873.3.1.1.2.8)

The value for the type of reset (hot reset or hard reset).

Syntax

INTEGER {

(1) - Normal (disruptive)

(2) - NDCLA (Non-Disruptive Code Load Activation)

Access

read-write

Status

current

8-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

9 Maintenance Panel Health

Check MIB Objects

This section covers the implementation details for the Maintenance Panel (MP)

MIB (QLGC-MP-MIB) on the SANbox 9000 switches. This MIB applies only to the

SANbox 9000 switches.

Maintenance Panel MIB Definitions

The Maintenance Panel MIB allows you to monitor the health of the maintenance

panel. This MIB consists of a single point status report object which reports the

status of the EPROM (ok/alarm). It also defines a trap which will be reported if the

status changes.

qlgcMPStatus (1.3.6.1.4.1.3873.3.2.1.1.1)

Represents the current status of eprom.

Syntax

Integer32

Access

ReadOnly

Status

Current

Return Value

ok (1)

alarm (2)

59047-09 C

9-1

Download from Www.Somanuals.com. All Manuals Search And Download.

9 – Maintenance Panel Health Check MIB Objects

Related Traps

The following trap relates the status of the MP health check status when the status

changes state.

qlgcMPStatusChange (1.3.6.1.4.1.3873.3.2.0.1)

The status of the maintenance panel eprom monitor changed.

Variables:

{ qlgcMPStatus }

9-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

AL_PA

Bit Error Rate

The probability that a transmitted bit will be

Arbitrated Loop Physical Address

erroneously received. The BER is

measured by counting the number of bits

in error at the output of a receiver and

dividing by the total number of bits in the

transmission. BER is typically expressed

as a negative power of 10.

Arbitrated Loop

A Fibre Channel topology where ports use

arbitration to establish a point-to-point

circuit.

Arbitrated Loop Physical Address (AL_PA)

Buffer Credit

A unique one-byte value assigned during

loop initialization to each NL_Port on a

Loop.

A measure of port buffer capacity equal to

one frame.

Abstract Syntax Notation (ASN.1)

Class 2 Service

Abstract Syntax Notation number One

(ASN.1) is an international standard that

specifies data used in communication

protocols.

A service that multiplexes frames at frame

boundaries to or from one or more

N_Ports wit h acknowledgment provided.

Class 3 Service

Authentication Trap

A service that multiplexes frames at frame

boundaries to or from one or more

N_Ports without acknowledgment.

Enables or disables the reporting of SNMP

authentication failures. If enabled, a notifi-

cation trap is sent to the configured trap

addresses in the event of an authentica-

tion failure. The default value is False.

Contact

Specifies the name of the contact person

who is to be contacted to respond to trap

events. The default is undefined.

BER

Bit Error Rate

Datagram

A message sent between two communi-

cating entities for which no explicit link

level acknowledgement is expected.

Domain ID

User defined name that identifies the

switch in the fabric.

59047-09 C

Glossary-1

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

Fabric Management Switch

The switch through which the fabric is

managed.

Internet Protocol

ISLSecurity

Flash Memory

ISLSecurity determines which switches a

port will establish a link with. ANY - we will

link with any switch. Ours - we will only link

to another QLogic switch. None - the port

will not establish an ISL link.

Memory on the switch that contains the

chassis control firmware.

Frame

Data unit consisting of a start-of-frame

(SOF) delimiter, header, data payload,

CRC, and an end-of-frame (EOF) delim-

iter.

LCFEnable

LCFEnable gives preference to Link

control frames (such as Class 2 ACK

frames) over other frames, when queued

for transmission in the switch. This may

provide better performance when running

Class 2 traffic. LCFEnable is incompatible

with MFSEnable, and both cannot be

selected. (True / False)

ICMP

Internet Control Message Protocol

IETF

Internet Engineering Task Force

Initiator

LIP

The device that initiates a data exchange

with a target device.

Loop Initialization Primitive sequence

Location

Specifies the switch location. The default

Internet Engineering Task Force

A large open international community of

network designers, operators, vendors,

and researchers concerned with evolution

and smooth operation of the Internet, and

responsible for producing RFCs. The

standards body responsible for Internet

standards, including SNMP, TCP/IP and

policy for QoS.

is undefined.

Logged-In LED

A port LED that indicates device login or

loop initialization status.

Management Information Base

A set of guidelines and definitions for the

Fibre Channel functions.The specification

and formal description of a set of objects

and variables that can be read and

possibly written using the SNMP protocol.

Various standard MIBs are defined by the

Internet Engineering Task Force.

Internet Control Message Protocol

A control protocol strongly related to IP

and TCP, and used to convey a variety of

control and error indications.

InteropCredit

Management Workstation

Port configuration parameter that adjusts

the number of port buffer credits to allow

interoperability with some non-QLogic

switches.

Workstation that manages the fabric

through the fabric management switch.

Glossary-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

MIB

QoS

Quality of Service

Management Information Base

MSEnable

Determines whether GS-3 management

POST

Power On Self Test

server commands will be accepted on the

port. It can be used to prevent in-band

management of the switch on any or all

ports. (True / False)

Power On Self Test (POST)

Diagnostics that the switch chassis

performs at start up.

NL_Port

Private Device

Node Loop Port. A Fibre Channel device

port that supports arbitrated loop protocol.

A device that can communicate only with

other devices on the same loop.

N_Port

Private Loop

Node Port. A Fibre Channel device port in

a point-to-point or fabric connection.

A loop of private devices connected to a

single switch port.

NMS

Read Community

Network Management Station

Read Community Authentication. A

write-only field; the value on the switch

and the SNMP management server must

be the same. The default value is Public.

Network Management Station

The console through which an adminis-

trator performs management functions.

Request For Comment (RFC)

NoClose

Internet-related specifications, including

standards, experimental definitions, infor-

mational documents and best practice

definitions, produced by the IETF.

Causes the switch to keep the loop open,

if no other device is arbitrating. It is

intended to improve performance when

there is a single L_Port device connected

to the switch. (True / False).

Enterprise Fabric Suite 2007

Switch management application.

Node

SFF

An addressable entity connected to an I/O

bus or network. Used primarily to refer to

computers, storage devices, and storage

subsystems. The component of a node

that connects to the bus or network is a

port.

Small Form-Factor transceiver.

SFP

Small Form-Factor Pluggable. A trans-

ceiver device, smaller than a GigaBit Inter-

face Converter, that plugs into the Fibre

Channel port.

Object

In the context of access control, an entity

to which access is controlled and/or usage

of which is restricted to authorized

subjects.

59047-09 C

Glossary-3

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

Simple Network Management Protocol

Trap Port

The port number on which the trap is set.

The protocol governing network manage-

ment and that allows monitoring of network

devices.

Trap Severity

Specifies a severity level to assign to the

trap. Trap severity levels include

SMI

Structure of Management Information

Unknown, Emergency, Alert, Critical, Error,

Warning, Notify, Info, Debug, and Mark

Small Form Factor

UDP

A transceiver device, smaller than a

GigaBit Interface Converter, that is perma-

nently attached to the circuit board.

User Datagram Protocol

Small Form-Factor Pluggable

An Internet protocol that provides connec-

tion-less datagram delivery service to

applications. Abbreviated UDP. UDP over

Internet Protocol adds the ability to

address multiple endpoints within a single

network node to IP.

A transceiver device, smaller than a

GigaBit Interface Converter, that plugs into

the Fibre Channel port.

SNMP

Simple Network Management Protocol

VIEnable

Structure of Management Information

FC-VI. When enabled, VI preference

frames will be transmitted ahead of other

frames. (True / False)

A notation for setting or retrieving manage-

ment variables over SNMP.

Target

Worldwide Name (WWN)

A storage device that responds to an initi-

ator device.

A unique 64-bit address assigned to a

device by the device manufacturer.

TCP

Write Community

Transmission Control Protocol

Write Community Authentication. A

write-only field; the value on the switch

and the SNMP management server must

be the same. The default value is Private.

Trap Address

Specifies the IP address to which SNMP

traps are sent. The default is 127.0.0.1. A

maximum of 5 trap addresses are

supported.

WWN

Worldwide Name

Trap Community

Zone

Trap Community Authentication. A

A set of ports or devices grouped together

to control the exchange of information.

write-only field; the value on the switch

and the SNMP management server must

be the same. The default value is Public.

Glossary-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

Zone Set

A set of zones grouped together. The

active zone set defines the zoning for a

fabric.

59047-09 C

Glossary-5

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

Notes

Glossary-6

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

connUnitEventUnitId 5-45

connUnitGlobalId 5-6

connUnitId 5-5

Accounting Groups 6-26

Additional IP Objects 4-29

Additional TCP Objects 4-43

Address Translation Group 4-12

connUnitLinkAgentAddressTypeY 5-54

connUnitLinkAgentAddressY 5-53

connUnitLinkAgentPortY 5-54

connUnitLinkConnIdY 5-55

connUnitLinkCurrIndex 5-55

connUnitLinkIndex 5-51

connUnitLinkNodeIdX 5-51

connUnitLinkNodeIdY 5-52

connUnitLinkPortNumber 5-53

connUnitLinkPortNumberX 5-51

connUnitLinkPortWwnX 5-52

connUnitLinkPortWwnY 5-53

connUnitLinkUnitId 5-50

connUnitLinkUnitTypeY 5-55

connUnitLocation 5-18

connUnitMaxEvents 5-20

connUnitModuleId 5-15

connUnitName 5-15

connUnitNumEvents 5-19

connUnitNumports 5-6

connUnitNumRevs 5-14

connUnitNumSensors 5-12

connUnitNumZones 5-14

connUnitPortControl 5-40

connUnitPortFCClassCap 5-33

connUnitPortFCClassOp 5-34

connUnitPortFCId 5-38

connUnitPortHWState 5-44

connUnitPortIndex 5-31

connUnitPortModuleType 5-36

connUnitPortName 5-41

connUnitPortNodeWwn 5-44

Capability Group 6-35

Class 1 Accounting T a ble 6-26

Class 2 Accounting T a ble 6-30

Class 3 Accounting T a ble 6-33

Configuration Group 6-2

configurationChangeTime 5-4

Configuring switch 3-6

Connectivity T a ble 5-5

Connectivity Unit Group 5-3

connUnitConfigurationChangeTime 5-13

connUnitContact 5-17

connUnitControl 5-16

connUnitDomainId 5-10

connUnitEventCurrID 5-20

connUnitEventDescr 5-49

connUnitEventFilter 5-18

connUnitEventId 5-47

connUnitEventIndex 5-46

connUnitEventObject 5-49

connUnitEventSeverity 5-48

connUnitEventType 5-48

59047-09 C

Index-1

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

connUnitPortPhysicalNumber 5-42

connUnitPortProtocolCap 5-43

connUnitPortProtocolOp 5-43

connUnitPortRevision 5-38

connUnitPortSn 5-38

connUnitPortStatCountLossofSignal 5-81

connUnitPortStatCountLossofSynchronization

5-81

connUnitPortStatCountNumberLinkResets

5-78

connUnitPortStatCountNumberOfflineSequen

ces 5-79

connUnitPortStatCountPBSYFrames 5-68

connUnitPortStatCountPrimitiveSequenceProt

ocolErrors 5-81

connUnitPortStatCountPRJTFrames 5-69

connUnitPortStatCountRxBroadcastObjects

5-76

connUnitPortStatCountRxElements 5-67

connUnitPortStatCountRxLinkResets 5-77

connUnitPortStatCountRxMulticastObjects

5-76

connUnitPortStatCountRxObjects 5-66

connUnitPortStatCountRxOfflineSequences

5-78

connUnitPortSpeed 5-39

connUnitPortStatCountAddressErrors 5-83

connUnitPortStatCountBBCreditZero 5-67

connUnitPortStatCountClass1FBSYFrames

5-70

connUnitPortStatCountClass1FRJTFrames

5-71

connUnitPortStatCountClass1PBSYFrames

5-71

connUnitPortStatCountClass1PRJTFrames

5-72

connUnitPortStatCountClass1RxFrames 5-70

connUnitPortStatCountClass1TxFrames 5-70

connUnitPortStatCountClass2FBSYFrames

5-73

connUnitPortStatCountClass2FRJTFrames

5-74

connUnitPortStatCountTxBroadcastObjects

5-77

connUnitPortStatCountTxElements 5-66

connUnitPortStatCountTxLinkResets 5-77

connUnitPortStatCountTxMulticastObjects

5-76

connUnitPortStatCountClass2PBSYFrames

5-73

connUnitPortStatCountClass2PRJTFrames

5-74

connUnitPortStatCountTxObjects 5-65

connUnitPortStatCountTxOfflineSequences

5-79

connUnitPortStatCountClass2RxFrames 5-72

connUnitPortStatCountClass2TxFrames 5-72

connUnitPortStatCountClass3Discards 5-75

connUnitPortStatCountClass3RxFrames 5-74

connUnitPortStatCountClass3TxFrames 5-75

connUnitPortStatCountDelimiterErrors 5-83

connUnitPortStatCountEncodingDisparityError

s 5-84

connUnitPortState1 5-34

connUnitPortStatIndex 5-65

connUnitPortStatObject 5-42

connUnitPortStatUnitId 5-64

connUnitPortStatus 5-35

connUnitPortTransmitterType 5-35

connUnitPortType 5-32

connUnitPortUnitId 5-31

connUnitPortWwn 5-37

connUnitPrincipal 5-12

connUnitPortStatCountError 5-65

connUnitPortStatCountFBSYFrames 5-68

connUnitPortStatCountFrames T o oLong 5-82

connUnitPortStatCountFramesTruncated 5-83

connUnitPortStatCountFRJTFrames 5-69

connUnitPortStatCountInputBuffersFull 5-67

connUnitPortStatCountInvalidCRC 5-80

connUnitPortStatCountInvalidOrderedSets

5-82

connUnitProduct 5-9

connUnitProxyMaster 5-11

connUnitREventTime 5-47

connUnitRevsDescription 5-23

connUnitRevsIndex 5-22

connUnitPortStatCountInvalidTxWords 5-80

connUnitPortStatCountLinkFailures 5-79

connUnitRevsRevId 5-22

Index-2

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

connUnitRevsUnitId 5-22

connUnitSensorCharacteristic 5-30

connUnitSensorIndex 5-24

connUnitSensorInfo 5-27

connUnitSensorMessage 5-28

connUnitSensorName 5-25

connUnitSensorStatus 5-26

connUnitSensorType 5-29

connUnitSensorUnitId 5-24

connUnitSEventTime 5-48

connUnitSn 5-9

connUnitSnsClassOfSvc 5-87

connUnitSnsFabricPortName 5-89

connUnitSnsFC4Type 5-88

connUnitSnsHardAddress 5-90

connUnitSnsId 5-85

connUnitSnsNodeIPAddress 5-87

connUnitSnsNodeName 5-86

connUnitSnsPortIdentifier 5-86

connUnitSnsPortIndex 5-85

connUnitSnsPortIPAddress 5-89

connUnitSnsPortName 5-86

connUnitSnsPortType 5-88

connUnitSnsProcAssoc 5-88

connUnitSnsSymbolicNodeName 5-91

connUnitSnsSymbolicPortName 5-90

connUnitState 5-7

EGP Neighbor T a ble 4-47

egpNeighEventTrigger 4-51

egpNeighInErrMsgs 4-49

egpNeighInErrs 4-48

egpNeighInMsgs 4-48

egpNeighIntervalHello 4-50

egpNeighIntervalPoll 4-50

egpNeighMode 4-51

egpNeighOutErrMsgs 4-49

egpNeighOutErrs 4-49

egpNeighOutMsgs 4-48

egpNeighState 4-47

egpNeighStateDowns 4-50

egpNeighStateUps 4-50

egpNeigh T a ble 4-47

Enterprise Fabric Manager 2007 3-6

connUnitStatusChangeTime 5-13

connUnit T a bleChangeTime 5-5

fcFeModuleCapacity 6-3

fcFeModuleDescr 6-4

Critical 2-3, 5 -96

fcFeModuleFxPortCapacity 6-6

fcFeModuleLastChange 6-6

fcFeModuleName 6-6

Debug 2-3, 5 -96

fcFeModuleObjectID 6-4

fcFeModuleOperStatus 6-5

fcFeModule T a ble 6-4

fcFxPortAddressIdErrors 6-24

fcFxPortAdminMode 6-14

EGP Group 4-46

59047-09 C

Index-3

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

fcFxPortBbCredit 6-8

fcFxPortClass3SeqDelivAgreed 6-20

fcFxPortBbCreditAvailable 6-13

fcFxPortBbCreditModel 6-21

fcFxPortC1Accounting T a ble 6-26

fcFxPortC1ConnTime 6-30

fcFxPortC1Discards 6-28

fcFxPortConnectedNxPort 6-21

fcFxPortCosSuppAgreed 6-18

fcFxPortCosSupported 6-10

fcFxPortDelimiterErrors 6-24

fcFxPortEdtov 6-9

fcFxPortC1FbsyFrames 6-28

fcFxPortC1FrjtFrames 6-28

fcFxPortC1InConnections 6-29

fcFxPortC1InFrames 6-26

fcFxPortFcphVersionAgreed 6-17

fcFxPortFcphVersionHigh 6-7

fcFxPortFcphVersionLow 6-8

fcFxPortHoldTime 6-12

fcFxPortC1InOctets 6-27

fcFxPortID 6-12

fcFxPortC1OutConnections 6-29

fcFxPortC1OutFrames 6-27

fcFxPortC1OutOctets 6-27

fcFxPortC2Accounting T a ble 6-30

fcFxPortC2Discards 6-32

fcFxPortC2FbsyFrames 6-32

fcFxPortC2FrjtFrames 6-32

fcFxPortC2InFrames 6-30

fcFxPortIntermixSuppAgreed 6-19

fcFxPortIntermixSupported 6-10

fcFxPortInvalidCrcs 6-24

fcFxPortInvalidTxWords 6-23

fcFxPortLinkFailures 6-22

fcFxPortLinkReseatIns 6-25

fcFxPortLinkResetOuts 6-25

fcFxPortName 6-7

fcFxPortC2InOctets 6-31

fcFxPortNxPortBbCredit 6-17

fcFxPortNxPortName 6-21

fcFxPortNxPortRxDataFieldSize 6-18

fcFxPortOlsIns 6-25

fcFxPortC2OutFrames 6-30

fcFxPortC2OutOctets 6-31

fcFxPortC3Discards 6-34

fcFxPortC3InFrames 6-33

fcFxPortOlsOuts 6-26

fcFxPortC3InOctets 6-34

fcFxPortOperMode 6-13

fcFxPortC3OutFrames 6-33

fcFxPortC3OutOctets 6-34

fcFxPortCapBbCreditMax 6-36

fcFxPortCapBbCreditMin 6-36

fcFxPortCapClass2SeqDeliv 6-38

fcFxPortCapClass3SeqDeliv 6-38

fcFxPortCapCos 6-37

fcFxPortCapFcphVersionHigh 6-35

fcFxPortCapFcphVersionLow 6-35

fcFxPortCapHoldTimeMax 6-39

fcFxPortCapHoldTimeMin 6-39

fcFxPortCapIntermix 6-37

fcFxPortPhysAdminStatus 6-14

FcFxPortPhysEntry 6-14

fcFxPortPhysLastChange 6-16

fcFxPortPhysOperStatus 6-15, 7-2

fcFxPortPhysRttov 6-16

fcFxPortPhys T a ble 6-14

fcFxPortPrimSeqProtoErrors 6-23

fcFxPortRatov 6-9

fcFxPortRxBufSize 6-9

fcFxPortSigLosses 6-23

fcFxPortStackedConnMode 6-10

fcFxPortStackedConnModeAgreed 6-19

fcFxPortSyncLosses 6-22

Fx Port Fabric Login T a ble 6-17

FxPort Configuration T a ble 6-7

FxPort Physical Level T a ble 6-14

fcFxPortCapRxDataFieldSizeMax 6-36

fcFxPortCapRxDataFieldSizeMin 6-37

fcFxPortCapStackedConnMode 6-38

fcFxPortCap T a ble 6-35

fcFxPortClass2SeqDeliv 6-11

fcFxPortClass2SeqDelivAgreed 6-20

fcFxPortClass3SeqDeliv 6-11

Index-4

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

Interfaces T a ble 4-5

IP Address T a ble 4-20

IP Address Translation T a ble 4-27

IP Group 4-14

IP Routing T a ble 4-22

ipAddr T a ble 4-20

ipAdEntAddr 4-20

ipAdEntBcastAddr 4-21

ipAdEntIfIndex 4-21

ipAdEntNetMask 4-21

ipAdEntReasmMaxSize 4-22

icmpInAddrMaskReps 4-33

icmpInAddrMasks 4-33

icmpInDestUnreachs 4-30

icmpInSrcQuenchs 4-31

icmpInTimeExcds 4-31

icmpInTimestampReps 4-33

icmpInTimestamps 4-32

icmpOutAddrMaskReps 4-37

icmpOutAddrMasks 4-37

icmpOutDestUnreachs 4-34

icmpOutParmProbs 4-35

icmpOutRedirects 4-35

icmpOutSrcQuenchs 4-35

icmpOutTimeExcds 4-34

icmpOutTimestampReps 4-36

icmpOutTimestamps 4-36

ipInUnknownProtos 4-16

ipNet T o MediaIfIndex 4-27

ipNet T o MediaNetAddress 4-28

ipNet T o MediaPhysAddress 4-28

ipNet T o MediaType 4-29

ifInUnknownProtos 4-10

ifLastChange 4-8

59047-09 C

Index-5

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

ipRoutingDiscards 4-29

Port T a ble 5-31

qlgcChFwDwldFileName 8-3

qlgcChFwDwldHostAddr 8-3

qlgcChFwDwldHostAddrType 8-2

qlgcChFwDwldHostPort 8-3

qlgcChFwDwldPathName 8-3

qlgcChFwOpRequest 8-2

qlgcChFwOpResult 8-1

qlgcChFwResetMethod 8-4

Revision T a ble 5-21

revisionNumber 5-2

Sensor T a ble 5-24

Simple Name Server T a ble 5-84

Simple Network Management Protocol 2-1

SNMP Group 4-52

Link T a ble 5-50

snmpEnableAuthenTraps 4-61

snmpInASNParseErrs 4-54

snmpInBadCommunityNames 4-53

snmpInBadCommunityUses 4-54

snmpInBadValues 4-55

snmpInBadVersions 4-53

snmpInGenErrs 4-56

snmpInGetNexts 4-57

snmpInGetRequests 4-56

snmpInGetResponses 4-57

snmpInNoSuchNames 4-55

snmpInPkts 4-52

Management information bases 4-1

snmpInSetRequests 4-57

snmpIn T o oBigs 4-54

snmpIn T o talReqVars 4-56

snmpIn T o talSetVars 4-56

snmpInTraps 4-58

Port Statistics T a ble 5-64

Index-6

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

snmpOutBadValues 4-59

snmpOutGenErrs 4-59

snmpOutGetNexts 4-60

snmpOutGetRequests 4-59

snmpOutGetResponses 4-60

snmpOutNoSuchNames 4-58

snmpOutPkts 4-53

snmpOutSetRequests 4-60

snmpOut T o oBigs 4-58

Transmission Group 4-52

trap severity levels 2-2, 5-96

Trap T a ble 5-96

trapRegFilter 5-98

trapRegIpAddress 5-97

UDP Listener T a ble 4-45

TCP Connection T a ble 4-41

tcpConnLocalAddress 4-42

tcpConnLocalPort 4-42

tcpConnRemAddress 4-42

59047-09 C

Index-7

Download from Www.Somanuals.com. All Manuals Search And Download.

SANbox Simple Network Management Protocol

Reference Guide

Notes

Index-8

59047-09 C

Download from Www.Somanuals.com. All Manuals Search And Download.

Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949.389.6000 www.qlogic.com

Europe Headquarters QLogic (UK) LTD. Quatro House Lyon Way, Frimley Camberley Surrey, GU16 7ER UK +44 (0) 1276 804 670

ment Suite are trademarks or registered trademarks of QLogic Corporation. Gnome is a trademark of the GNOME Foundation Corporation. Java and Solaris are registered trademarks of Sun

Microsystems, Inc. Linux is a registered trademark of Linus Torvalds. Mac OS X and Safari are registered trademarks of Apple Computer, Inc. Microsoft, Windows XP, Windows 2003, and

Internet Explorer are trademarks of Microsoft Corporation. Netscape Navigator and Mozilla are trademarks or registered trademarks of Netscape Communications Corporation. Red Hat is a

registered trademark of Red Hat Software Inc. SUSE is a trademark of Novell, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners. Infor-

mation supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this publication. QLogic Corporation reserves the

right, without notice, to make changes in product design or specifications.

Download from Www.Somanuals.com. All Manuals Search And Download.

Python Automobile Alarm 871XP User Guide
Rangemaster Ventilation Hood RMG2H60SS User Guide
Ricoh Camera Flash GF 1 User Guide
RocketFish Bluetooth Headset RF GPS31126 User Guide
Rosen Entertainment Systems Games G10 User Guide
Rosen Entertainment Systems GPS Receiver DS HD0820 User Guide
Sanyo Air Conditioner 12KHS71 User Guide
Sanyo Indoor Furnishings POA CH EX06 User Guide
Sanyo Projector PLV WF20 User Guide
Scion Stereo System PT546 00121 User Guide