Rosen Entertainment Systems GPS Receiver DS HD0820 User Guide

In-Dash Multi-Media /  
Navigation System  
DS-HD0820  
System Features  
High resolution, touch-screen LCD display  
Navigation includes text-to-speech voice and visual turn-by-turn  
directions, 5 Million+ Points-Of-Interest library, 3D route and building views  
for major cities, plus 3 language options (English, Spanish, French-Canadian)  
Play DVD movies, audio CDs or discs with MP3 music files  
AM-FM stereo tuner with 24 station presets (18 FM, 6 AM)  
Bluetooth Hands-Free interface with built-in microphone  
iPodTM interface  
XM Satellite Radio ready  
Supports the vehicle’s steering wheel controls  
USB & SD Card ports for multi-media playback (SD on some models)  
Back-Up Camera and/or sensor ready  
Dual Zone interface for optional rear seat displays  
Custom DVD Splash Screen capable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Button Details (as shown in Figure 1.)  
1
2
3
11  
12  
Eject button for DVD Mode.  
IR sensor for remote control.  
Microphone for Bluetooth hands-free  
When in Radio Mode, turn the knob  
to select the station. Press to select  
equalizer modes.  
Press repeatedly to cycle through  
DVD and USB Modes.  
13  
14  
Press to go to set up menu  
Press to go to Radio Mode or Satellite  
Radio (if equipped).  
4
5
Press to repeat song, chapter or  
CD/DVD.  
Enter/Exit Navigation Mode (naviga-  
tion can only be exited by pressing  
this button).  
15  
When in Radio Mode, press to play  
the Next/Previous Preset station.  
Press and hold to seek for stations.  
When in DVD or iPodTM Mode, press  
to select the Next/Previous song or  
chapter.  
6
7
Mute/unmute audio.  
Turn the knob to adjust the volume.  
Press to turn system ON/OFF.  
16  
17  
18  
Press to enable NIGHT MODE. Press  
again to turn display off/on.  
8
9
SD Card Slot (for navigation only).  
Mini USB for external media device.  
Photo sensor used for auto-dimming.  
System reset (if required). Use a  
paper clip (or similar) to press.  
10  
CD/DVD/MP3 Disc Slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Turn System On/Off  
Vehicle ignition must be On or in ACC Mode to  
operate system.  
Press the Left Knob on the panel to turn the  
system ON/OFF (Figure 2).  
Volume Adjustment  
Turn the Left Knob on the panel to adjust the  
volume (Figure 2.).  
Figure 2.  
Main Menu  
From any other screen, touch  
to enter  
Main Menu (Figure 3.) The Main Menu  
includes TV, Bluetooth, iPodTM, Radio,  
XM, DVD, AV, Navigation and Setup.  
Figure 3.  
For detailed information of these functions, please refer to the “User’s Manual”.  
TV  
Bluetooth  
iPodTM  
AM/FM Radio  
SAT Radio  
Return  
DVD  
Auxiliary Input  
Navigation  
System Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Navigation  
Before using the Rosen Navigation software, read this entire manual. Make sure that you are  
familiar with the system’s features and know how to operate the system.  
Glance at the screen only when necessary and safe to do so. Let the computer voice guide you. If  
prolonged viewing is necessary, pull off the road to a safe location.  
Introduction to Your Rosen Navigation  
Rosen Navigation provides turn-by-turn visual and voice assistance to direct you to your selected  
destination. It quickly calculates step-by-step directions to any destination available on the in-  
cluded navigation map.  
Rosen Navigation uses Global Positioning System (GPS) satellites, and a digital roadway map da-  
tabase to calculate and display travel directions. The system’s GPS antenna receives signals from  
a constellation of 24 satellites orbiting the earth and uses the strongest of signals, to determine  
your position to within meters.  
_______________________________________________________  
Before operating your Rosen Navigation system, please carefully read and follow the  
instructions provided in the “Safety Information and Precautions”  
located on Page 14 of this Quick Start Guide.  
_______________________________________________________  
For Complete Operating Instructions  
Please refer to the Rosen Navigation User’s Manual to find complete instructions on the operation  
and many features of the Rosen Navigation System.  
Initial Touch Screen Calibration  
You may need to calibrate the touch screen when the system is first used. To do this, enter the  
Navigation Mode immediately after you turn the system on. Follow the Information screens as  
indicated.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Start Up/Main Menu  
When the Rosen Navigation software starts, you will see the reminder warning to use your  
Rosen Navigation software safely and lawfully.  
Note: Please refer to the User’s Manual for additional information and warning on the proper  
use of the Rosen Navigation product.  
Warning Screen  
Main Menu  
Select to  
display the  
map view  
The Attention screen is displayed each  
time the system is turned ON as a reminder  
to make use of the navigational aids in a  
safe manner.  
Main Menu Option  
Select this Option to...  
Find  
Pick a destination for routing  
Manage  
Route  
Organize or select saved routes or Points-Of-Interest  
Edit or cancel a route in progress  
Settings  
Set preferences for routing, map, screen, navigation and more  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Find Address Screen  
Select state name  
Select from previously used city  
Select from previously used city  
Enter street name  
Enter street address number  
Previous screen  
Map View Screens  
Indicates distance  
to and direction of  
next turn  
Touch here to bring  
up arrow and 3D  
options  
Next turn street  
or HWY  
2D/3D map view  
options  
To avoid delays or  
change route  
Opens cursor menu  
65  
Return to navi  
menu  
Indicates  
posted HWY  
speed  
GPS strength  
and quick  
menu option  
3 screen view op-  
tions can modify  
toyour preference  
Return to  
current GPS  
position  
Compass  
Button  
Select this Option to...  
Button  
Select this Option to...  
Zoom the map view in  
and out  
Switch map display between  
2D and 3D views.  
Horizon up/down adjust-  
ment for 3D view  
Display menu, jump to Main  
Menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Points of Interest Screen  
POI Menu Option  
Select this Option to...  
Around Address  
Around Cursor  
Find POI by state, city and address  
Find POI by a cursor or location you have selected  
Locate POI by your current satellite location  
Find POI around your final destination  
Find POI along your current route  
Around GPS Position  
Around Destination  
Along Route  
NOTE: Once you have selected your POI Menu Option and entered the  
requested data, the screen will switch to the POI Category Screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Set-Up Menu  
You may customize the Rosen Navigation software to your own preferences. Select Settings  
from the Navigation Menu. You have 8 user preference categories shown on 2 screens, the  
second located by pressing the right arrow  
. In each of the 8 user preference categories,  
there are numerous options that can be changed.  
Screen 1  
Fine tune the  
appearance of the  
map screen  
Set how the system  
navigates  
Change settings for  
language, voice,  
measurements,  
time, etc.  
Route settings  
Screen 2  
Modify look and  
behavior of menu  
screens  
Set connection to  
TMC receiver (if  
equipped)  
Enable and disable  
driving warnings  
such as speeding  
Information on  
maps and licenses  
included  
For further explanations of screen options,  
Help  
press the Help button located on the lower  
Right Hand side of screen (if shown).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Bluetooth Hands-Free  
The system provides Bluetooth Hands-Free communication function. If your mobile phone is  
Bluetooth enabled, it can establish a point-to-point connection with the system, providing tele-  
phone dial up, call answering, Phonebook and Bluetooth music play functions.  
Note: Bluetooth modules and software of cell-phones vary by brand and date of manufacture.  
Some functions may be different or not compatible with this system during actual use.  
Enter/Exit  
To Enter: From Main Menu (Figure 3.)  
touch the  
icon.  
To Exit: From Bluetooth screen (Figure 4)  
touch button in the  
upper left hand corner.  
Figure 4.  
Figure 5.  
Figure 6.  
Pairing Your Phone  
Touch  
Open the Bluetooth function of your cell  
phone and enable the Bluetooth device search function.  
“Pairing” will be displayed on the screen. After the  
connection succeeds, your cell phone will display (Rosen).  
Connect to the device by entering the password (1234). The  
system will indicate “Linking” and then “Connected.” When  
your phone is connected its name will be displayed on the unit.  
Touch  
(Figure 6.) if you desire the system’s Bluetooth  
feature to automatically detect your cell phone when the  
vehicle and system are turned on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Making/Ending A Call (Figure 7.)  
You can dial the number from your cell phone or  
use the touch-screen shown at the right by entering  
the number, then press the  
icon to dial.  
Press  
to clear.  
Touch  
to transfer the call to your  
cell phone. Press again to transfer the call  
Figure 7.  
over speakers. Press  
to end the call.  
Answer A Call (Figure 8.)  
For incoming calls, the system will automatically  
switch to the answer screen.  
Press the  
lower  
icon to answer call or the  
to refuse the call  
Figure 8.  
Touch  
to transfer call between cell phone  
and car speakers.  
Phonebook (Figure 9.)  
Touch  
and the Phonebook will appear.  
The phonebook can be used to view incoming  
numbers, received numbers and missed numbers.  
The system will not display your cell phone’s  
internal phonebook but will show the last 5  
numbers dialed, received or missed. Press the  
appropriate button on the screen to view the  
numbers.  
Figure 9.  
Dialed Received Missed  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
iPodTM Audio/Video  
When the system is connected to an external iPodTM player, the audio and video files stored on  
the iPodTM can be played through the system.  
Note: Sleep mode should be enabled on the iPodTM to reduce the event of battery drain.  
Enter (Figure 10.)  
From the Main Menu, touch  
the  
icon to enter the  
iPodTM control system.  
Figure 10.  
Touch Button Descriptions (Figure 11.)  
Pop up/hide the number pad  
Page up  
Return to  
upper menu  
Repeat the current played song  
Scan and play songs in the  
current folder. The next song  
will be played after the current  
song has been finished for 10  
seconds.  
Previous  
track  
Next track  
Play/pause  
Page down  
Display playing  
information  
Play songs in the current folder  
at random.  
Figure 11.  
Press once to display song information.  
Press twice to display spectrum equalizers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Main Menu (Figure 12.)  
Touch  
to enter category list. The  
system categorizes files into 6 options you  
can select as shown in screen shot.  
Touch the desired category to select that section.  
Figure 12.  
Play A Song (Figure 13.)  
Touch the song shown on playlist to play.  
Touch Ito select previous song or  
Ito select next song.  
Touch thearrow for page up or  
for page down.  
Figure 13.  
Touch the center of the control  
plate to display the play information on the  
screen or to access the Equalizer (EQ)  
Figure 14.).  
Play A Video (Figure 15.)  
Touch  
to enter category list.  
Touch 6. Video to switch to iPodTM  
operation.  
Figure 14.  
From your iPodTM press Play for the  
video file desired. The file will be  
transferred to the system.  
NOTE: Video function may not be supported  
on all iPod models.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Figure 15.  
XMTM Satellite Radio (optional)  
Enter (Figure 16)  
From the Main Menu, touch the  
icon to enter the XM Radio function.  
Figure 16.  
Touch Button Descriptions (Figure 17)  
Touch  
and seek previous  
and next available stations.  
Touch  
to select SAT1, SAT2,  
SAT3 Channel Preset screens.  
To select a station as a Preset,  
press and hold a PRESET bar.  
The name of the station will  
appear in the bar when saved.  
Figure 17.  
Play A Preset Channel (Figure 18)  
Touch the desired Preset channel. The  
channel will load and begin to play.  
NOTE: The background of the selected  
channel will become lighter.  
Figure 18.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Rosen Navigation Information  
Safety Information and Precautions  
WARNING! Please read and follow the following safety precautions.  
Failure to follow the instructions below may increase  
your risk of collision and personal injury.  
The Rosen Navigation software is not a substitute for your personal judgment. The route suggestions should never supersede  
any local traffic regulation or your personal judgment and /or knowledge of safe driving practices. Prior to completing any  
maneuvers suggested by your Rosen Navigation software (for example, a U-turn or a left turn), verify that you can legally and  
safely complete the maneuver. Do not follow route suggestions if they direct you to perform an unsafe or illegal maneuver,  
would place you in an unsafe situation, or would route you into an area that you consider unsafe.  
Do not use the Rosen Navigation software to locate emergency services (such as police, fire stations, hospitals, and clinics).  
The database may not include all emergency service providers. Use your own best judgment and ask for directions in these  
situations.  
If the vehicle is in motion, only a passenger should program the Rosen Navigation software. The driver should not program the  
system unless the vehicle is parked in a safe location.  
The Rosen Navigation software’s map database provides information on suggested routes without regard to factors that may  
affect your driving experience or the time required to arrive at your destination. For example, the system does not reflect road  
detours, closures or construction, some road characteristics (e.g., road surface, slope or grade, weight or height restrictions,  
etc.), temporary traffic congestion, weather conditions, and similar factors.  
Vehicle Position  
The Rosen Navigation software’s computer considers vehicle speed and heading changes, together with longitude and latitude  
information, to accurately determine vehicle heading and position on a digital map.  
Map and Information Database  
The map database used by your Rosen Navigation software was created using high-resolution aerial and land based data  
collection.  
Car navigation maps are frequently updated. While the database was judged to be as accurate as possible at the time of its  
release, a map database can never be 100% accurate. Road information that is maintained in the map databases, such as turn  
restrictions or road names may change over time.  
End-User License Agreement  
Please refer to the Rosen Navigation User’s Manual to review and accept the terms and conditions in the End-User License  
before operating this product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
About the Registered Marks  
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and  
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
®
iPod is a registered trademark of Apple Computer, Inc.  
NOTE: Features and specifications listed in this manual are subject to change without notice.  
Manufactured under license from Dolby Laboratories. “Dolby” and  
the double-D Symbol are trademarks of Dolby Laboratories.  
Touch  
AM/FM  
Screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All rights reserved. Copyright 2009.  
DP-HD0821 Rev B  

PYLE Audio Stereo System PLCD75USMP User Guide
Pyramid Technologies Car Amplifier PB444X User Guide
RayTek Stud Sensor GP User Guide
RCA CRT Television F19431 User Guide
Roland Electronic Keyboard HPi 6s User Guide
Rotel Stereo Amplifier RB1090 User Guide
Ryobi Cordless Saw P523 User Guide
Samsung Flat Panel Television 320PX User Guide
Samsung Flat Panel Television 580 User Guide
Samsung Washer Q1044A User Guide