U.S.A.
MASTER VOLUME
STEREO HIGH-FIDELITY AMPLIFIER PA-3035
PYRAMID
POWER
BASS
0
TREBLE
0
2
2
2
2
4
8
4
8
4
8
4
8
6
6
6
6
ON / STANDBY
Down
Up
-10
10+
-10
10+
BALANCE
-
oo
dB
-58 dB
-48 dB
-38 dB
-28 dB
-18 dB
-8 dB
-0 dB
VOLUME LEVEL
L
R
EXTERNAL
PROCESSOR
PRESET EQ
PHONO
TUNER
CD
TAPE
VIDEO
AUX
VOL MIC
1
MIC
1
MUTE
VOLUME LEVEL
DISPLAY
MULTI-FUNCTION REMOTE CONTROLLED SYSTEM
PHONES
PR-530A
I N T E G R A T E D S T E R E O A M P L I F I E R
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection precautions
TAPE
PLAY REC
EQ
ꢀ
When connecting, either disconnect the power plug
from the power outlet or turn off the unit’s power
using the POWER switch.
PLAY
REC
PHONO
CD
AUX
VIDEO TUNER
L
R
ꢀ
ꢀ
Check the left and right channels and connect properly
(Left to L and Right to R).
LINE
P LAY(O UT) (IN) REC
Insert the plugs securely. Improper connection can lead
to the generation of noise.
Compact disc player
Connect the CD terminals to the OUTPUT terminals on the
compact disc player using the pin-plug cord.
TAPE
PLAY REC
EQ
PLAY
REC
PHONO
CD
AUX
VIDEO TUNER
PROCESSOR terminals
L
These terminals are used to connect a graphic equalizer or
sound processor. They also come in handy for connecting
an AV (audio/video) selector unit.
R
OUTPUT
Use pin-plug cords to connect the REC terminals to the
INPUT terminals on the selected component and also to
connect the PLAY terminals to its OUTPUT terminals.
TAPE
PLAY REC
EQ
PLAY
REC
PHONO
CD
AUX
VIDEO TUNER
CD/AUX terminals
R
These terminals have an electrical performance which is
equivalent to that of the CD terminals and the TUNER
terminals which means that they can be used as the audio
output terminals for a video disc player or TV tuner.
Connect these terminals to the OUTPUT terminals on the
component using the pin-plug cord.
LINE
P LAY(O UT) (IN) REC
TAPE Deck
Recording connections: Connect the TAPE REC
terminals to the input (LINE IN) terminals on the tape deck
using the pin-plug cord.
Playback connections: Connect the TAPE PLAY
terminals to the output (LINE OUT) terminals on the
cassette deck using the pin-plug cord.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Speaker connection
Connect the speaker systems to the SPEAKERS terminals
on the rear panel of the unit with the speaker cords.
When viewed from the front (the listening position), the
speaker mounted on the left should be connected to the L
terminals, and the speaker mounted on the right should be
connected to the R terminals. Be sure to connect the
polarities of the speaker systems and the SPEAKER
terminals correctly (+ to +, - to -). If the polarity of one of
the speaker systems is connected improperly, sound in the
central area between the speakers will appear to be missing,
and the position of the instruments will not be clear,
resulting in a loss of stereo directionality; so take care
when connecting.
Tuner
Connect the TUNER terminals to the OUTPUT terminals
on the tuner using the pin-plug cord.
TAPE
PLAY
EQ
PLAY
REC
PHONO
CD
AUX
VIDEO TUNER
REC
L
R
OUTPUT
* When connecting, do not allow the conductor of the
speaker cords to be exposed from the terminals and come
into connect with other terminals.
R
IG
H
T
L
E
F
T
_
_
Ω
S
P
EA
K
ER
S
6
~
8
Front Left
Front Right
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL INFORMATION
1
18
9
2
4
16
15
6
MASTER VOLUME
STEREO HIGH-FIDELITY AMPLIFIER PA-3035
POWER
BASS
0
TREBLE
0
2
2
2
2
4
8
4
8
4
8
4
8
6
6
6
6
ON / STANDBY
Down
Up
-10
10+
-10
10+
BALANCE
oo
VOLUME LEVEL
-
dB
-58 dB
-48 dB
-38 dB
-28 dB
-18 dB
-8 dB
-0 dB
L
R
EXTERNAL
PROCESSOR
PRESET EQ
PHONO
TUNER
CD
TAPE
VIDEO
AUX
VOL MIC
1
MIC
1
MUTE
VOLUME LEVEL
DISPLAY
MULTI-FUNCTION REMOTE CONTROLLED SYSTEM
PHONES
19
17
20
14
13
12
11
10
7
8
3
5
1. POWER SWITCH
12. CD
Power is supplied to the amplifier when pressing this
switch once and the power is switched off if pressing once
more.
This switch is pressed when you wish to listen to the
compact disc player connected to the CD terminals.
13. TUNER
2. INDICATOR DISPLAY
This switch is pressed when you wish to listen to the radio
broadcasts from the tuner connected to the TUNER
terminals.
Press either PHONO, TUNER, CD, TAPE, VIDEO or
AUX, the relative indicator will be grown.
3. PRESET EQ
14. PHONO
This switch is pressed when you wish to listen to records
on the turntable connected to the PHONO terminals.
Press this switch to preset one of the following kinds of
music: POP (green color), ROCK (red color), CLASSIC
ꢀ
When the power of the unit is turned on the initial
position of input selector switch is set to “TUNER”.
Be sure to press the desired switch (one only) firmly.
(orange color) and FLAT (no color).
4. MASTER VOLUME
ꢀ
This is used to control the sound heard from the speakers
or through the headphones. The volume will be increased
when rotates the volume clockwise.
15. TONE CONTROL TREBLE VOLUME
The treble sound is emphasized when the TREBLE knob is
rotated clockwise from its “0” position while it is
attenuated when the knob is rotated counterclockwise.
16. TONE CONTROL BASS VOLUME
The bass sound is emphasized when the BASS knob is
rotated clockwise from its “0” position while it is
attenuated when the knob is rotated counterclockwise.
17. PHONES JACK
5. EXTERNAL PROCESSOR
When this unit is connected to an external graphic
equalizer or sound processor, press this switch.
6. BALANCE VOLUME (L/R)
The volume of the left and right speakers can be adjusted
by the BALANCE volume. As the volume is turned to left,
the sound from the left speaker becomes louder than that
from the right speaker, and vice versa.
This is the jack for the headphones. Connect the plug on
the stereo headphones for private listening.
Adjust the volume so that it does not hurt your ears when
using the headphones.
Adjust so that the sounds from the left and right speakers
are heard with equal volume at your listening position.
7. MIC LEVEL VOLUME
- If you do not intend to use your headphones, always
ensure that you unplug them.
Adjust the MIC LEVEL by rotating MIC LEVEL
VOLUME knob. (just for karaoke only)
8. MIC JACK
18. REMOTE STANDBY INDICATOR
The Power Amplifier is in remote standby state if the
remote standby indicator is lighted.
Inserting Microphone if using. (just for karaoke only)
9. REMOTE SENSOR
19. MUTE
Press this switch to mute the sound, press it again to cancel
the mute function.
Work with the remote control.
10. VIDEO/AUX
20. VOLUME LEVEL DISPLAY
This switch is pressed when using the component
connected to the VIDEO/AUX terminals for playback.
11. TAPE
Press this switch to see the volume level indicated by
INDICATOR DISPLAY.
This switch is pressed when you wish to listen to the
cassette deck connected to the tape terminals.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING PROCEDURES
Before starting operation
Check that the controls have been set to the following positions before commencing operation
ꢀ
ꢀ
ꢀ
Rotate the VOLUME control counterclockwise as far as it will go and set it at the “0” minimum volume position.
Set the BALANCE control to its center position.
Set the BASS and TREBLE tone controls to the “0” (center) position.
After these checks, press the POWER switch to turn on the power.
If you find a remote standby indicator is lighted, the power amplifier is in remote standby mode.
(a) Press the power switch off and press it once again after the remote standby indicator is off.
(b) Using the remote control to switch on the power.
After switching on, the indicator will be shinning on “Phono” for a second, after that the unit is set to “Tuner”.
Playing a program source
1.Press the desired input selector switch to select the program source to which you wish to listen.
To listen to record: press the PHONO switch.
To listen to radio broadcast: Press the TUNER switch.
To listen to a compact disc: Press the CD switch.
To listen to a component connected to VIDEO terminals: Press the VIDEO switch.
To listen to a component connected to AUX terminals: Press the AUX switch.
To listen to a tape: Press the TAPE switch.
2.Operate the program source unit.
3.Gradually turn the VOLUME control clockwise until the desired volume level is obtained.
4.Attain a balance between the sound of the left and right channels using the BALANCE control.
5.To adjust the tone quality, adjust the BASS and TREBLE control.
RECORDING TAPE
A record, compact disc, broadcast of the program source of a component connected to the line terminals can be recorded by
the tape deck connected to the TAPE recording (REC) terminals.
1.Select the input selector switch corresponds to the program source (Phono, CD, Tuner, Video/Aux) which is to be
recorded.
2.Start playing the program source.
3.Operate the tape deck and press the “REC” key.
*The volume, Balance, Tone and other controls (including graphic equalizer) have no effect on the recording level or sound
quality of the signals being recorded even they are operated.
MICROPHONE MIXING (KARAOKE)
- Connect the microphone to MIC jack.
- Adjust your desired singing voice level with Karaoke by turning the MIC LEVEL switch.
**Note**
- If strange noises (squealing or howling) are emitted during mixing, change the direction of the microphone or turn down
the volume.
- It is possible to record a singing voice accompanying the CD, Tuner, Cassette Tape or Video.
- If using microphone or with Karaoke, it is better to switch off the sound effect switches and adjust the treble/bass volume
to zero.
- If using remote to switch off the power Amplifier, the Remote Standby Indicator will be grown on. At this state the
amplifier is in sleep mode only, the transformer and parts of circuit is in operation with low energy.
Switch off the Power Amplifier by pressing the main power switch in case of long absence.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
POWER
CD
3
1
4
7
9
2
5
1
2
3
4
5
7
8
9
PRESET EQ
EXTERNAL
PROCESSOR
12
6
8
MUTE
10
AMP
VOLUME
PHONO
DISPLAY
13
14
VIDEO/
AUX
6
STOP
PROGRAM
15
TAPE
MEM CLEAR
MEM
16
18
20
TUNER/
BAND
17
19
21
CD
N / M
DISPLAY REPEAT
10
11
1. POWER
Power is supplied to the amplifier when pressing this
switch once and the power is switched off if pressing once
more.
2. PRESET EQ
6. AMP/DISPLAY
After switching on the Amplifier and press this key once,
the indicators will be shinning for indicating the OUTPUT
VOLUME LEVEL.
7. VIDEO/AUX
Press this key when you using the component connected to
the VIDEO/AUX terminals for playback.
8. TAPE
Press this key when you wish to listen to the cassette deck
connected to the tape terminals.
9. TUNER/BAND
Press this key when you wish to listen to the radio
broadcasts from the tuner connected to the TUNER
terminals. And press again to select the broadcast band
(AM or FM).
(P.S: This key only works with our equalizer of our Hi-Fi
system.)
Press this switch to preset one of the following kinds of
music: POP (green color), ROCK (red color), CLASSIC
(orange color) and FLAT (no color).
3. EXTERNAL PROCESSOR
When this unit is connected to an external graphic
equalizer or sound processor, press this switch.
4. MUTE
Press this switch to mute the sound, press it again to cancel
the mute function.
5. PHONO
This switch is pressed when you wish to listen to records
on the turntable connected to the PHONO terminals.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
10.CD
20. REPEAT
Press this key when you wish to listen to the compact disc
player connected to the CD terminals.
11. N/M
Press REPEAT button once, the display will show out
ERPEAT 1 , then the track which is under playback state
or ready state will repeat until you switch off the CD player
or press STOP (■). Press REPEAT button once more,
REPEAT ALL will shown on the display, all tracks will be
repeated until you switch off the CD player or press STOP
(■) button. Press this key again will resume to normal
playback mode.
You can press this key to select the NORMAL playback
sequence or MEMORY playback sequence.
(P.S: This key only works with our equalizer of our Hi-Fi
system.)
12. NUMBER KEYS
For CD, press the keys from no. 1-10 to select the songs on
the disc from 1 to 10.
(P.S: This key only works with our CD or our HI-FI
system.)
13. VOLUME
Press the key (▲) can increase the volume and (▼) can
decrease the volume.
(P.S: This key only works with our CD of our HI-FI
system.)
21. DISPLAY
Press DISPLLAY button once, the display will show the
Track Remain Time. And press once more, disc Remain
Time will be shown on the Display. Press again can resume
to playback time display.
(P.S: This key only works with our CD of our HI-FI
system.)
14. PLAY/PAUSE (
)
Press this button to play and press it once again if wish to
pause. If in pause mode, press this key once again to
resume the operation. (P.S: This key only works with our
CD of our HI-FI system.)
15. STOP ( )
Press this key to stop the playing/fastfwd/fastbwd or any
kinds of such operations.
REMOTE CONTROL UNIT
(P.S: This key only works with our CD of our HI-FI
system.)
Remote controlling instructions
The remote control box can directly control majority of
system functions of HI-FI SYSTEM. The functions include
power control of the whole system, Volume control, sound
field control, CD operation control, Tuner operation
control and also source control function. This remote
controller may not function properly if an obstacle is
located between it and the receiving unit, or if the remote
controller is held at an improper angle with respect to the
receiving unit.
16. MEMORY
Using this key for storing your desired playback sequence.
First press this key will change the display to memory state,
then press (
) or
(
) to reach your desired
track no. Press this key again will store the first track, then
use (
) or (
) key again to reach your second
track, press this key again to store the 2nd track, repeat the
above sequence to store all your desired tracks. Press the
STOP (■) key to terminate the memory storing function.
Now you can playback on your desired sequence by
pressing the PLAY (►) KEY.
(P.S: This key only works with our CD of our HI-FI
system.)
17. MEM CLEAR
if you wish to clear all the memories, you can press this
key once.
(P.S: This key only works with our CD of our HI-FI
system.)
Battery Installation
Remove the rear cover of the remote controller by sliding it
backward. Install two AA (1.5V) size batteries, while
observing the correct polarity [match the (+) and (-) signs].
18. FastFWD (
The player will skip ahead to the next track each time the
FastFWD ( )button is pressed once. Continuously
)
pressing this button makes the player scan through the
tracks forward rapidly.
(P.S: This key only works with our CD of our HI-FI
system.)
**Note** Exhausted butteries may reduce the level of
sensitivity of the controller.
19. FastBWD (
)
The player will skip backward when FastBWD (
) is
pressed once. Continuously pressing this button makes the
player scan through the tracks backward rapidly.
(P.S: This key only works with our CD of our HI-FI
system.)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Power output………………Rated 50W + 50W
Output level (1 KHz)
( 8 ohms, T.H.D. 10% 1 khz)
TAPE REC……………….250 mV into 47 koms
Signal to noise ratio (short-circuit, A-network)
PHONO…………………..60dB
TUNER, TAPE PLAY…….70dB
Power requirements
Reference 30W + 30 W
(8 ohms, T.H.D.1% 1 khz)
Load impedance……………8 ohms
Total harmonic distortion…less than 0.05% at 1/2 rated
MS power output.
Power voltage……………..230V, 50Hz
For U.S.A & Canada………110V, 60Hz
Power consumption………..watts VA Rated
Watts maximum
Frequency response (at 1 watt)…20 to 20 khz, + 1dB,
-2 dB
RIAA curve deviation………+ 0.5dB, -0.5 dB
(PHONO 20 Hz to 20 KHz)
Dimensions…………………..360mm W
128mm H
Input sensitivity and impedance (at 1 KHz for rated
power output)
246mm D
PHONO……………………2.5 mV/47 kohms
(Max. input capability: mV at 1 KHz, less than 0.1%
total harmonic distortion.)
Weight……………………….6 kg (13.2 Ibs) net
6.5Kg (14.3 Ibs) packed
TUNER, TAPE PLAY……..250 mV/47 koms.
* Design and specification are subject to change
without notice.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|