Pride Profile
ACN# 088 609 661
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Care Instructions
3
INTRODUCTION
Welcome to Pride Mobility Products Corporation (Pride)ꢀ Congratulations
on the purchase of your new Pride Profile cushionꢀ The Pride Profile is
designed with the most advanced state-of-the-art components to deliver
comfort, durability, and health maintenance features for active usersꢀ
This manual is intended as a supplement to the in-service training provided
by your authorized Pride providerꢀ If you have any questions or problems
regarding the Pride Profile, please contact your authorized Pride providerꢀ
USE
The Pride Profile is labeled to assure proper placement on the chairꢀ
To place the Pride Profile on the chair:
1ꢀ Locate the Front Bottom label on the underside of the cushionꢀ
2ꢀ Place the cushion on the seat so that the Front Bottom label is located
on the front of the seat, label side facing downꢀ The zipper on the cushion
will face the rear side of the seatꢀ See figure 1ꢀ
ZIPPER FACING
REAR SIDE OF SEAT
Figure 1 Cushion Placement
Pride Profile
wwwꢀpridemobilityꢀcom
Download from Www.Somanuals.com. All Manuals Search And Download.
Rev B/January 2003
4
Installation and Care Instructions
CLEANING
The Pride Profile can be easily cleanedꢀ
To clean the Pride Profile:
1ꢀ Locate the zipper on the rear side of the outer coverꢀ See figure 2ꢀ
2ꢀ Unzip the outer cover and pull out the inner cushion, which is wrapped
in a fluid resistant coverꢀ
3ꢀ Wash the outer cover in a washing machine on the COLD settingꢀ
CAUTION: Do not use bleach when washing the outer cover. Doing
so may cause damage to the cover.
4ꢀ Spray the inner fluid-resistant cover with a disinfectant, then wipe it cleanꢀ
CAUTION: Never submerge the inner cushion of your Pride Profile
in water. Doing so may cause damage to the cushion.
5ꢀ Allow both the outer cover and inner covers to air dryꢀ
CAUTION: Do not attempt to put the outer cover in a dryer. This may
cause shrinking.
6ꢀ Once dry, put the inner cushion back inside the outer coverꢀ Zip the outer
cover closed, and place the Pride Profile back onto the seat of your chairꢀ
INNER CUSHION WRAPPED
IN FLUID-RESISTANT COVER
OUTER COVER
ZIPPER ON
REAR SIDE
Figure 2 Pride Profile (Inner Cushion Removed)
Pride Profile
wwwꢀpridemobilityꢀcom
Download from Www.Somanuals.com. All Manuals Search And Download.
Rev B/January 2003
Installation and Care Instructions
5
STORAGE
The Pride Profile should not be stored in extreme heat or cold temperaturesꢀ
WARRANTY
The Pride Profile cushion is designed and produced to the highest of standardsꢀ
Our Pride Profile cushion is guaranteed to be free of defects in material and
workmanship for a period of 24 monthsꢀ If any defect in material or
workmanship is found, Pride Mobility Products will repair or replace, at our
discretion, the Pride Profile cushionꢀ This warranty does not apply to cushions
abused or misused by the user and deemed such by Pride Mobility Productsꢀ
Claims and repairs should be processed through the nearest authorized Pride
providerꢀ
Pride Profile
wwwꢀpridemobilityꢀcom
Download from Www.Somanuals.com. All Manuals Search And Download.
Rev B/January 2003
Pride Mobility Products Corporation
182 Susquehanna Avenue
Exeter, PA 18643
USA
Pride Mobility Products Company
380 Vansickle Road, Unit 350
St. Catharines, Ontario L2R 6P7
Canada
Pride Mobility Products Ltd.
Unit 106, Heyford Park Camp Road
Upper Heyford, Oxfordshire OX25 5HA
Pride Mobility Products Australia Pty. Ltd.
21 Healey Road
Dandenong, 3175
Victoria, Australia
Pride Mobility Products Italia s.r.l.
Via della Tecnica, 14
Prato della Corte
00065 Fiano Romano
Roma - Italia
Pride Mobility Products Europe B.V.
Tijmuiden 28
1046 AL Amsterdam
The Netherlands
INFMANU2127/REV B/JANUARY 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
|