V201P-PM.NA1UPPM
VCR & DVD PLAYER
DVP3340V/17
User manual
Philips vous remercie de
votre confiance.
Thank you for choosing Philips.
Gracias por escoger Philips.
Need help fast?
Besoin d'une aide
rapide?
Les Guide d'utilisation rapide et Manuel de
l'utilisateur regorgent d'astuces destinées à
simplifier l'utilisation de votre produit Philips.
Toutefois, si vous ne parvenez pas à résoudre
votre probléme, vous pouvez accéder à
notre aide en ligne à l'adresse
Necesita ayuda
inmediata?
Lea primero la Guía de uso rápido o el
Manual del usuario, en donde encontrará
consejos que le ayudarán a disfrutar
plenamente de su producto Philips.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
Read your Quick Use/Start Guide and/or
Owner's Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
asistencia en línea en
www.philips.com/welcome
www.philips.com/welcome
www.philips.com/welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near
water.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
9. Do not defeat the
safety purpose of the
15.Battery usage CAUTION –To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
polarized or
grounding-type plug.
AC Polarized
Plug
A polarized plug has two blades with one
wider than the other.A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
● Install all batteries correctly, + and - as
marked on the unit.
● Do not mix batteries (old and new or
carbon and alkaline, etc.).
● Remove batteries when the unit is not used
for a long time.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
16.Apparatus shall not be exposed to
dripping or splashing.
17.Do not place any sources of danger
on the apparatus (e.g. liquid filled
objects, lighted candles).
11.Only use attachments/accessories
specified by the manufacturer.
18.This product may contain lead and mercury.
Disposal of these materials may be regulated
due to environmental considerations.
For disposal or recycling information,
please contact your local authorities
or the Electronic Industries Alliance :
EL 6475-E005: 04/01
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Operation . . . . . . . . . . . . . . . . . . . . . . .19
Introduction . . . . . . . . . . . . . . . . . . . . . .6
Moisture Condensation . . . . . . . . . . . . . . . . . .6
Symbol Used in this Manual . . . . . . . . . . . . . .6
VCR Tape Playback . . . . . . . . . . . . . . . . . . . .19
Basic Instructions . . . . . . . . . . . . . . . . . . . . .19
Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .19
Manual Tracking . . . . . . . . . . . . . . . . . . . . . .19
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Still Picture and Frame-by-Frame Playback .19
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .20
SKIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
VCR Tape Recording . . . . . . . . . . . . . . . .20-22
Basic Instructions . . . . . . . . . . . . . . . . . . . . .20
External Timer Recording . . . . . . . . . . . .20-21
Instant Timer Recording . . . . . . . . . . . . . . .21
Recording from External Components . . . . .22
Copying from DVD to VCR . . . . . . . . . . . . . .23
On-Screen Display - VCR . . . . . . . . . . . . . . .23
Additional VCR Information . . . . . . . . . . . . .24
VCR Auto Play System . . . . . . . . . . . . . . . . .24
S-VHS Quasi Playback (SQPB) . . . . . . . . . .24
General Playback Features - DVD . . . . . . . . .25
About the
Symbol Display . . . . . . . . . . . . .6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .6
Types of Playable Discs . . . . . . . . . . . . . . . . .7
Region code . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Notes on Copyrights . . . . . . . . . . . . . . . . . . . .7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .9
About the Remote Control . . . . . . . . . . . . . . .9
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Preparation . . . . . . . . . . . . . . . . . . . . . .11
Basic TV Connections . . . . . . . . . . . . . . .11-12
Optional TV Connections . . . . . . . . . . . . . . .11
Connection to an Amplifier . . . . . . . . . . . . . .12
Initial Settings - VCR . . . . . . . . . . . . . . . . . . .13
General Operation . . . . . . . . . . . . . . . . . . . .13
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . .13
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Displaying Disc Information on-screen . . . .15
Initial Settings - DVD . . . . . . . . . . . . . . . .16-18
General Operation . . . . . . . . . . . . . . . . . . . .15
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .16
• Menu Language . . . . . . . . . . . . . . . . . . .16
• Disc Audio/Subtitle/Menu . . . . . . . . . . . . .16
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .16
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . .16
• Display Mode . . . . . . . . . . . . . . . . . . . . . .16
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
• Dolby Digital/MPEG . . . . . . . . . . . . . . . . .17
• Sample Freq. (Frequency) . . . . . . . . . . . .17
• DRC (Dynamic Range Control) . . . . . . .17
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . .17
• Password (Security Code) . . . . . . . . . . . .17
• Area Code . . . . . . . . . . . . . . . . . . . . . . . .18
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .18
PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
B.L.E. (Black Level Expansion) . . . . . . . . .18
Additional Features . . . . . . . . . . . . . . . . . . . .26
Playing an Audio CD or MP3/Windows
MediaTM Audio file . . . . . . . . . . . . . . . . . . . . .27
Programmed Playback . . . . . . . . . . . . . . . . .27
Repeat Programmed Tracks . . . . . . . . . . . .27
Erasing a Track from Program List . . . . . . .27
Erasing the Complete Program List . . . . . .27
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .28
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . .28
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .28
Moving to another File . . . . . . . . . . . . . . . .28
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Rotating the picture . . . . . . . . . . . . . . . . . .28
Playing a DVD VR format Disc . . . . . . . . . . .29
Maintenance and Service . . . . . . . . . . . . . . .29
Reference . . . . . . . . . . . . . . . . . . . . . . .30
Language Codes . . . . . . . . . . . . . . . . . . . . . .30
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . .30
Troubleshooting . . . . . . . . . . . . . . . . . . . .31-32
Specifications . . . . . . . . . . . . . . . . . . . . . . . .33
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference.
About the
Symbol Display
“
” may appear on your TV display during opera-
tion and indicates that the function is not permitted by
this unit or the disc.
This manual provides information on the operation
and maintenance of your unit. Should the unit require
service, contact an authorized service location.
Notes on Discs
Handling Discs
Moisture Condensation
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Never operate the unit immediately after moving it
from a cold location to a warm location. Leave it
unplugged for two or three hours without operating it.
If you use the unit in such a situation, it may damage
discs/tapes and internal parts.
Symbol Used in this Manual
Note:
Indicates special notes and operating fea-
tures.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Tip:
Indicates tips and hints for making the task
easier.
Cleaning Discs
A section whose title has one of the following
symbols is applicable only to the disc represented
by the symbol.
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
ALL
All discs listed below
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
Windows MediaTM Audio files
WMA
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Playable Discs
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled as
the same as the rear of the unit or “ALL”.
DVD
(8 cm / 12 cm disc)
Video CD (VCD/SVCD)
(8 cm / 12 cm disc)
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This num-
ber must match your DVD player’s regional code or
the disc cannot play.
Audio CD
(8 cm / 12 cm disc)
In addition, this unit plays DVD±R/RW and ZCD-
R/RW, SVCD, Dual disc that contains audio titles,
MP3, Windows MediaTM Audio, and/or JPEG files.
• If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
Notes on Copyrights:
Notes:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyright-
ed material without permission. This product features
the copy protection function developed by
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs
may not be played on the unit.
Macrovision. Copy protection signals are recorded on
some discs. When recording and playing the pictures
of these discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intend-
ed for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in mal-
functions.
• This DVD player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality. Pre-recorded
DVDs are automatically set to these standards.
There are many different types of recordable disc
formats (including CD-R containing MP3 or
Windows MediaTM Audio files) and these require
certain pre-existing conditions (see above) to
ensure compatible playback.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET COM-
PATIBILITY WITH THIS MODEL 525p DVD+VCR,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
Customers should note that permission is
required in order to download MP3 / Windows
MediaTM Audio files and music from the Internet.
Our company has no right to grant such per-
mission. Permission should always be sought
from the copyright owner.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
a
b
c d
e f
g
h i j
l
k
o
m
n
p
q
DVD: The DVD deck is selected.
a
1 (STANDBY ON)
Switches the unit ON and OFF.
:
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
b
D.DUBBING
Copies a DVD in the DVD deck to a VHS tape
in the VCR deck.
:
Indicates repeat mode.
: Indicates when the DVD & VCR is locked.
[P]: Indicates when the Progressive scan is
active.
c
d
e
f
Disc Tray (DVD deck)
Insert a disc here.
N (PLAY)
Starts playback of a disc or tape.
:
Unit is in timer recording or a timer
recording is programmed (VCR part only)
x (STOP)
Stops playback of the disc or tape.
:
A cassette is in the VCR deck.
VCR: The VCR deck is selected.
X (PAUSE)
REC: Unit is Recording.(VCR part only)
PM: Indicates PM time. (AM is not displayed.)
Pause playback of a disc in the DVD deck
temporarily.
Press repeatedly for frame-by-frame playback.
: Indicates total playing time, elapsed
time, remaining time or current deck
status (Playback, Pause, etc).
g
h
Cassette Compartment (VCR deck)
Insert a video cassette here.
o
p
q
Remote Sensor
Point the unit Remote Control here.
z (RECORD)
Starts recording.
Press repeatedly to set the recording time.
TRACKING (V/v)
Para cambiar la fuente (L1 y L2) en modo VCR.
i
SOURCE, DVD/VCR (output select)
Select one of your output sources to view on
the TV screen between DVD and VCR.
VIDEO IN/AUDIO IN (Left/Right)
Connect to the audio/video output of an
external source (Audio system, TV/Monitor,
Another VCR).
j /(EJECT)
Ejects the tape in the VCR deck.
k
m (REW)
DVD: Go to beginning of current chapter/track.
Press and hold for fast forward search.
VCR: Rewinds the tape from STOP mode or
for fast forward picture search.
Child Lock Feature Notice
The control buttons on the front panel of the unit
can be switched off so that your unit can only be
operated using the remote control.
l
M (F.FWD)
DVD: Go to NEXT chapter/track.
Press and hold for fast reverse search.
VCR: Advances the tape from STOP mode or
for fast reverse picture search.
Press CHILD LOCK on the remote control to turn
on the LOCK function, SAFE
display window.
appears in the
To cancel the LOCK function, press CHILD LOCK
m /OPEN/CLOSE
Opens or closes the disc tray.
on the remote control until OFF
display window.
This function must be set in VCR mode.
drops from the
n
Display Windows
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DISPLAY : Switches between the clock, tape counter
and tape remaining modes on the display.
b / B / v / V : Selects menu options.
v/V (TRK +/-) : Adjusts manually the tape’s picture
onscreen.
OK : Confirms menu selections. Displays functions
on the TV screen.
a
O (BACK) : Displays the menu of a video CD with PBC.
ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ
X (PAUSE/STEP) :
Pause playback or recording temporarily.
Press repeatedly for frame-by-frame playback.
./> (PREV/NEXT) :
Go to next the chapter or track.
Returns to beginning of current chapter or track or go
to previous chapter or track.
b
c
x (STOP) : Stops playback or recording.
m/M (REW/FFW) :
- DVD: Search backward or forward.
- VCR: Rewinds/Advances the tape during the STOP
mode, for fast backward/forward picture search.
N (PLAY) : Starts playback.
0-9 Selects numbered options in a menu.
PROGRAM : Shows Program menu.
CLEAR : Removes a mark on the Marker Search
menu.
ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ
AUDIO : Selects an audio language (DVD).
SUBTITLE : Selects a subtitle language.
ANGLE : Selects a DVD camera angle, if available.
ZOOM : Enlarges DVD/VCD video image.
MARKER : Marks any point during playback.
REPEAT : Repeat chapter, track, title or all.
ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ
1 (POWER) : Switches unit ON and OFF.
A-B (REPEAT) : Repeats sequence between two
points (A and B).
/ (OPEN/CLOSE) : Opens and closes the disc tray.
INPUT : Selects the VCR deck’s source (LINE 1 or
LINE 2).
z (RECORD) : Starts recording.
SHUFFLE : Plays tracks in random order.
SEARCH : Displays Marker Search menu.
TITLE : Displays the disc’s Title menu, if available.
SPEED : Selects recording speed.
DVD : Select the unit function mode to DVD.
VCR : Select the unit function mode to VCR.
CHILD LOCK : Disables front panel buttons
SETUP/MENU: Accesses or removes DVD Setup
menu and VCR menu.
SKIP : Fast forwards picture search through 30
seconds of recording.
About the Remote Control
Operation Range
Battery installation
Detach the battery cover on the rear of
the Remote Control, and insert two
(R03/AAA) size batteries with 3 and #
aligned correctly.
Point the Remote Control at the remote sensor and
press the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Do not mix old and new batteries and never
mix different types of batteries such as
standard, alkaline, etc.
Angle:
About 30° in each direction of the front of
the remote sensor.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
Caution
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
a b c d
e
f
g
a
VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
f
g
COAXIAL (DIGITAL AUDIO OUT jack)
(DVD EXCLUSIVE OUT)
Connect to digital (coaxial) audio equipment.
b
c
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
S-VIDEO OUT (DVD EXCLUSIVE OUT)
Connect to a S-Video Input on TV.
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr) (DVD EXCLUSIVE OUT)
Connect to a TV with Y Pb Pr inputs.
d
e
AUDIO OUT (Left/Right)
(DVD EXCLUSIVE OUT)
Connect to a TV or other equipment with audio inputs.
AC Power Cord
Plug into the power source.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Depending on your TV and other equipment there
are various ways you can connect the player.
Please refer to the manuals of your TV, VCR,
stereo system or other devices as necessary for
additional connection information.
Optional TV Connections
These connections support only DVD playback. The
tuner and VCR still output through the DVD/VCR
OUT (A1, V) jacks.
Note:
Notes:
The video may be displayed unstable.
•
The picture and sound of a nearby TV, VCR, or
radio may be distorted during playback. Position
the units away from each other or turn off the unit
after removing the disc.
Rear of DVD+VCR
•
Do not connect the unit’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Do not connect the unit via another VCR. The
DVD image could be distorted by the copy protec-
tion system.
•
Please ensure that an external cable/satellite box
is connected to the DVP3340V.
C
A2
S
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
Y
Pr
Pb
R
L
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
AUDIO INPUT
Rear of TV
VIDEO
Rear of TV
AUDIO INPUT
INPUT
R
L
S-Video connection
Connect the S-VIDEO OUT jack on the unit to the
S-Video jack on the TV using the optional S-Video
cable (S).
V
A1
Component Video / Progressive Scan
connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the unit’s pro-
gressive scan output for the highest possible video
resolution.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the unit to the corresponding
jacks on the TV using an optional Y Pb Pr cable (C).
Rear of DVD+VCR
Audio/Video connection
Audio connection
1. Connect the DVD/VCR VIDEO OUT jack on the
unit to the video in jack on the TV using the video
cable supplied (V).
Connect the Left and Right AUDIO OUT jacks of the
unit to the audio left/right in jacks on the TV using the
supplied audio cables (A2).
2. Connect the Left and Right DVD/VCR AUDIO
OUT jacks on the unit to the audio left/right in
jacks on the TV using the supplied audio cables
Note:
(A2).
If you connect both S-Video and component jack to
your TV, video displayed might be unstably on your
TV. You should disconnect one of both connections to
solve the problem.
Note:
If you use this connection, set the TV’s source selec-
tor to VIDEO.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Amplifier
Rear of DVD+VCR
You can only listen to DVD playback using COAXIAL
(X) and AUDIO OUT (A2) connections. The VCR will
still be heard through the DVD/VCR AUDIO OUT (A1)
jack.
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
A1
A2
X
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the unit to the audio
left and right in jacks on your amplifier, receiver, or
stereo system using the audio cables (A1, A2)
supplied.
R
L
COAXIAL
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
Connecting to an amplifier equipped with two chan-
nel digital stereo (PCM) or to an Audio/Video receiv-
er equipped with a multi-channel decoder (Dolby
Digital™, MPEG 2)
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
1. Connect one of the unit’s DIGITAL AUDIO OUT
jacks (COAXIAL X) to the corresponding jack on
your amplifier. Use an optional digital (COAXIAL
X) audio cable.
Accessory Audio/Video (A/V) Connections to
unit
2. You will need to activate the unit’s digital output.
(See “AUDIO” on page 17).
Connect the VCR IN LINE 1 or LINE 2 jacks on the
unit to the audio/video out jacks on your accessory
component, using the optional audio/video cables.
(Refer to page 22 for “Recording from External
Components”.)
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital). Check the receiver manual and the logos on
the front of the receiver.
Notes:
•
If the audio format of the digital output does not
match the capabilities of your receiver, the receiv-
er will produce a strong, distorted sound or no
sound at all.
•
•
Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
To see the audio format of the current DVD in the
on-screen display, press AUDIO.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Initial Settings - VCR
The clock uses the 12-hour system. Be sure to set
AM and PM correctly.
By using the VCR Setup menu, you can make
various adjustments to items such as clock setting,
and timer recordings.
PROGRAM
Your unit allows remote control adjustment of several
features.
1. Press SETUP/MENU and the main menu
appears.
2. Use v / V to choose the PROGRAM option and
press OK.
General Operation
1. Press VCR on the Remote Control.
2. Press SETUP/MENU and the MAIN menu will
appear.
If eight programs are already entered, the FULLY
PROGRAMMED message appears for a moment
and then PROGRAM 1 appears on the TV
screen.
3. Use the v / V buttons to switch between the
program options, and the b / B buttons to input
the program information:
3. Use v/V to select the desired menu, then press
OK.
Input the MONTH, DAY, START and STOP times
of the program you want to record.
4. Use v/V to choose a desired option on the select-
ed Menu. Then use b/B to choose a desired
setting.
INPUT: Select a LINE1 or LINE2.
SPEED: AUTO mode determines how much tape
is left and switches the speed from SP to SLP,
and vice versa. If it is necessary to complete
recording the program.
5. Press SETUP/MENU to exit menu.
Note:
If this occurs there could be some picture and
sound distortion at the point where the speed
changes.
Menus remain on-screen for 3 minutes.
REPEAT: To record up to 8 programs on a certain
day of every week select WEEKLY. To record up
to 8 programs at the same time Monday through
Friday select DAILY. Otherwise select ONCE.
CLOCK
4. Press SETUP/MENU and the program is memo-
rized by the unit.
5. Additional programs may be entered by repeating
steps 1-4.
Notes:
•
Ensure you insert a tape with the record safety
tab intact before the first programmed time.
Use v/V/b/B to enter the necessary information.
•
Press x (STOP) to end timer recording.
• MONTH : Choose the month.
• DAY : Choose the date.
The day of the week will display automatically.
• YEAR : Choose the year.
• TIME : Choose the time.
Press and hold b/B to advance clock continuously.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
SETUP
•
If you make a mistake or want to change a set-
ting, use v to select the option and correct it
using b / B.
•
If the program preset time is past, the “PAST
TIME PROGRAMMED” message appears on the
TV screen. Return to the incorrect program and
program it with the correct time.
•
•
If you enter a past date, the timer recording will
be performed on that date of the next year.
If the power fails or the unit is unplugged the
clock and timer settings are kept in memory for
only 3 seconds. Otherwise you must reset the
clock and timer.
FUNCTION OSD
The on-screen display can be turned on or off.
•
•
If the tape indicator is blinking, no tape is loaded.
AUDIO MODE
When you are playing DVD at programmed
Recording time, the unit automatically change to
VCR mode and start recording.
The unit has two separate audio playback systems,
the high quality VHS Hi-Fi system and standard
NORMAL mono system. The same audio is generally
recorded on both systems. The VHS Hi-Fi system
plays on separate (left and right) channels, and the
NORMAL system plays monaural sound. The normal
track is always played so the cassette can be played
on a unit that does not have VHS Hi-Fi.
•
The unit will automatically power off when Timer
Recording ends.
Checking or Erasing the Timer Program
Programming can be checked whenever the unit is
turned on.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE
1. Press SETUP/MENU and the main menu appears.
(HI-FI/NORMAL) is in HI-FI position] for selecting the
audio output signals from the AUDIO OUT terminals
(L ch and R ch). This display setting should normally
be left in the stereo position, so that when a stereo
tape is played, the stereo sound will be heard through
the left and right channels. If a mono tape is played
and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
2. Use v / V to choose the PROGRAM menu and
press OK.
3. Use b / B to select a program you want to check
or erase. To erase the program, press CLEAR.
4. Press SETUP/MENU to return to the TV screen.
Program Priority
If the recording start and end times of preset
programs overlap on the same day (see the
example), the second program is not recorded until
the first is finished.
In this example, the first part of program numbers 2
and 3 are not recorded.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Disc Information
on-screen
You can display various information about the disc
Initial Settings - DVD
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 15 to 18.
loaded on-screen.
1. Press DISPLAY to show various playback
information.
To display and exit the Menu:
The displayed items differ depending on the disc
type or playing status.
Press SETUP/MENU to display the menu. A second
press of SETUP/MENU will take you back to initial
screen.
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
General Operation
1. Press SETUP/MENU. The Setup menu appears.
LANGUAGE
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
English
Original
Original
Original
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
•
Title (Track) – Current title (or track).
number/total number of titles (or tracks).
Chapter – Current chapter number/total num-
ber of chapters.
•
•
•
•
•
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of
angles.
Move
Select
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well
as alternate setting(s).
Note:
3. Use v / V to select the second desired option
then press B to move to the third level.
If no button is pressed for a few seconds, the on-
screen display disappears.
4. Use v / V to select the desired setting then press
OK to confirm your selection. Some items require
additional steps.
5. Press SETUP/MENU or N (PLAY) to exit the
Setup menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive Scan
LANGUAGE
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for con-
nection to a TV or a monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
LANGUAGE
English
Original
Original
Original
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
To Turn ON progressive scan:
Connect component video out of the this unit to the
input of your monitor/television, set your television or
monitor to Component Input.
Move
Select
Menu Language
1. Select “Progressive Scan” on the DISPLAY menu
then press B.
Select a language for the VCR and DVD’s Setup
menu and on-screen display.
2. Select “On” using the v / V buttons.
Disc Audio / Subtitle / Menu
3. Pressing OK will set the player to Progressive
scan mode.
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
TV Output Select
Original – Refers to the original language in
which the disc was recorded.
Set the player’s TV Output Select options according
to the TV connection type.
Other – To select another language, press num-
ber buttons then OK to enter the corresponding 4-
digit number according to the language code list
on page 30. If you enter the wrong language
code, press CLEAR.
YPbPr – When your TV is connected with the COM-
PONENT VIDEO OUT/PROGRESSIVE SCAN jacks
on the DVD player.
S-VIDEO – When your TV is connected with the S-
VIDEO jack.
DISPLAY
DISPLAY
16:9
TV Aspect
Display Mode
Progressive Scan
TV Output select
Widescree
Off
YPbPr
Move
Select
TV Aspect
4:3 – Select when a standard 4:3 TV is connect-
ed.
16:9 – Select when a 16:9 wide TV is connected.
Display Mode
The display Mode setting works only when the TV
Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with bands
on the upper and lower portions of the screen.
Panscan – Automatically displays the wide pic-
ture on the entire screen and cuts off the portions
that do not fit.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO
LOCK (Parental Control)
LOCK
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type
of audio system you use.
Rating
Password
Area
Unlock
New
US
AUDIO
Dolby Digital
Bitstream
MPEG
PCM
48 kHz
On
Sample Freq.
DRC
Move
Select
Vocal
Off
Rating
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
Move
Select
Dolby Digital / MPEG
1. Select “Rating” on the LOCK menu then
press B.
Bitstream – Select “Bitstream” if you connect this
DVD player’s DIGITAL OUT jack to an amplifier or
other equipment with a Dolby Digital or MPEG
decoder.
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
PCM (for Dolby Digital / MPEG) – Select when
connected to a two-channel digital stereo amplifi-
er. DVDs encoded in Dolby Digital or MPEG will
be automatically downmixed to two-channel PCM
audio.
Input a password and press OK. Enter it again and
press OK to verify. If you make a mistake before
pressing OK, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most restric-
tions and rating eight (8) is the least restrictive.
Sample Freq. (Frequency)
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
If your receiver or amplifier is NOT capable of han-
dling 96 kHz signals, select 48 kHz. When this choice
is made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
4. Press OK to confirm your rating selection, then
press SETUP/MENU to exit the menu.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz.
Password
You can enter or change password.
Check the documentation for your amplifier to verify
its capabilities.
1. Select Password on the LOCK menu then press
B.
Dynamic Range Control (DRC)
2. Follow step 2 as shown above (Rating).
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presen-
tation. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
To change the password, press OK when the
“Change” option is highlighted. Input a password
and press OK. Enter it again and press OK to
verify.
3. Press SETUP/MENU to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
Vocal
1. Press SETUP/MENU to display the Setup menu.
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
2. Input the 6-digit number “210499”. The password
is cleared.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 30.
1. Select “Area Code” on the LOCK menu then
press B.
2. Follow step 2 as shown previous page (Rating).
3. Select the first character using v / V buttons.
4. Press B and select the second character using
v / V buttons.
5. Press OK to confirm your Area code selection.
OTHERS
OTHERS
PBC
On
Off
B.L.E.
Move
Select
VCD
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the
PBC.
Off: Video CDs with PBC are played the same way
as Audio CDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set
your preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This chapter describes how to operate the VCR and
DVD.
Manual Tracking
To manually adjust the tracking use the v/V (TRK +/-)
buttons on the Remote Control during playback.
VCR Tape Playback
Notes:
Press the VCR button to select the device to be oper-
ated.
•
•
Vertical jitter requires a very fine adjustment.
Tracking is automatically reset to normal when the tape
is ejected or the power cord is unplugged for more than
3 seconds.
Basic Instructions
1. Turn on the TV.
2. Direct VIDEO/AUDIO connection is made
between the unit and the TV, set the TV’s source
selector to VIDEO.
Search
This function lets you visually search for a tape sec-
tion in either direction: forward and backward. During
the high-speed picture search modes, the audio is
muted and horizontal lines (noise bars) appear. Also,
a short time is needed to stabilize the tape speed
when re-entering the PLAY mode so slight interfer-
ence may be observed during this time.
3. Insert a pre-recorded video cassette.
The indicator lights and the unit powers on
automatically.
4. If a tape without a safety tab is inserted the unit
starts playback automatically.
If not, press N (PLAY).
To search:
5. Press x (STOP) to stop playback. If the tape
reaches the end before you press x (STOP) the
unit automatically stops, rewinds and ejects the
tape.
1. Press m (REW) or M (FFW) during playback.
2. To return to playback, press N (PLAY).
Logic search:
Note:
During fast forwarding or rewinding press and hold
m (REW) or M (FFW) the picture will be played
back at 7 times normal playback speed.
It is not necessary to select the tape speed for play-
back because it is automatically selected by the unit.
Note:
Auto Tracking
After 3 minutes in SEARCH mode the unit returns to PLAY
mode to protect the tape and video heads.
Automatic tracking adjusts the picture to remove
snow or streaks and beings when:
Still Picture and Frame-by-Frame Playback
•
•
•
A tape is played for the first time.
The tape speed (SP & SLP) changes.
1. Press X (PAUSE/STEP) during playback.
A still picture appears on the TV screen and the
audio is muted.
Streaks or snow appear due to scratches on the
tape.
2
If the still picture vibrates vertically, stabilize it by
using v/V (TRK +/-) on the Remote Control.
3. Press X (PAUSE/STEP) repeatedly to advance
the video picture one frame at a time.
4. To return to playback, press N (PLAY).
Note:
After 5 minutes in STILL mode the unit stops to protect the
tape and video heads.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Slow Motion
External Timer Recording
1. While in still mode, press M (FFW).
The tape is played at a speed 1/19 times slower
than the normal speed.
If the external device that is connected to this unit
has the timer reservation function, this unit can record
the input signal the external device via the timer
LINE1 jack.
2. Use v/V (TRK +/-) on the Remote Control if nec-
essary to adjust the tracking.
1. Connect the LINE1 input jacks on this unit to the
AUDIO/VIDEO OUTPUT jack on the external
device using the audio/video cables.
3. To return to the normal speed, press N (PLAY).
Notes:
•
During slow motion, audio is muted and horizontal
lines (noise bars) may appear on the TV screen.
This is normal.
2. Set the timer reservation setting of the external
device.
3. Turn off the external device.
•
After 3 minutes in SLOW MOTION mode the unit
goes back to PLAY mode to protect the tape and
video heads.
4. Insert a video cassette with the safety tab intact to
this unit.
5. Press z (RECORD) for more than 3 seconds on
the front panel when the unit power is off.
SKIP
The " " mark will flashes on the display window.
This unit is set to standby mode for the external
timer recording.
This feature is useful for skipping commercials or
short program segments.
1. Press SKIP in playback mode.
The unit performs a fast forward picture search
through 30 seconds of recording.
Notes:
•
•
•
If the power of the external device is on by the
timer reservation setting, this unit detects the
signals of external device and start the
recording.
2. Press SKIP again to extend the search time by an
addition 30 seconds. The maximum search time is
3 minutes.
If the power of the external device is off while
external timer recording, this unit will be stop
the external timer recording and turns off the
power.
3. When the search is complete, the unit goes into
playback mode automatically.
If the power of the external device is on again,
this unit will be start the external timer record-
ing again.
VCR Tape Recording
•
•
Press x (STOP) to stop recording while exter-
nal timer recording is in progress.
Basic Instructions
The external timer record is available only for
the device that is connected with LINE1 jack
on this unit.
To pause the recording
•
The external timer record will be set to off
automatically when:
- There is no recordable tape.
1. Press X (PAUSE/STEP) to pause the tape during
recording. The REC indicator flashes in the display
window.
- STOP or PAUSE button is pressed while
external timer recording.
- The power of this unit is ON in the external
timer record standby mode.
2. When you want to continue recording, press X
(PAUSE/STEP) or press z (RECORD).
After 5 minutes in PAUSE mode, the unit stops
automatically to protect the tape and the video
heads.
- When you press the z (RECORD) for more
than 3 seconds again in the external timer
record standby mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Priority
8. Press z (RECORD) repeatedly to select the
recording time length. Each time you press this
button the recording time increases 30 minutes
(up to 9 hours).
If the recording time of this unit and the external
device are overlap:
At the end of the recording, the unit will stop
recording and shut off.
The earlier program takes priority.
When the earlier program finishes, the later program
starts.
If you set the time to 0H00M, the unit goes into
the normal recording mode.
9. Press x (STOP) to stop the recording.
External Timer Record
Timer Record of this unit
Checking the Recording Time
Press z (RECORD) once to check the recording
time. The recalled setting automatically returns to the
TV screen after 6 seconds.
Extending the Recording Time
Note:
The recording time can be extended anytime by
pressing z (RECORD). Subsequent presses result in
advancing the recording time by 30-minute
increments.
Instant Timer recording is not available when the
external timer record is in progress.
Note:
Instant Timer Recording
If you press X (PAUSE/STEP) during instant timer
recording, the instant timer recording is cancelled. It
goes to normal recording PAUSE mode.
With this feature you can record for a preset length
without using the program timer.
1. Turn on unit and the TV.
2. Insert a video cassette with the safety tab intact.
3. If you are recording from another source via
audio/video input jacks (at the rear or front panel).
4. Connect the LINE1 or LINE2 input jacks on this
unit to the AUDIO/VIDEO OUTPUT jack on the
external device using the audio/video cables.
5. Select LINE1 (rear jacks) or LINE2 (front jacks) by
using INPUT.
6. Set the desired recording speed (SP or SLP)
using SPEED. The tape speed appears on the TV
screen.
7. Press z (RECORD) twice. The menu appears on
the TV screen, recording starts, and the
(TIMER) indicator lights.
INSTANT TIMER RECORD
INPUT
LINE1
SP
SPEED
START
NOW
LENGTH
0H30M
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from External
Components
You can record from an external component, such as
a camcorder or VCR, connected to any of the unit’s
external inputs.
1. Make sure that the component you want to record
from is connected properly to the unit.
See page 12.
2. Press INPUT repeatedly to select the external
input to record from.
•
LINE1 (L1): Audio/Video Input mounted on
back panel.
•
LINE2 (L2): Audio/Video Input mounted on
front panel.
3. Load a recordable tape.
4. Set a recording mode (SP or SLP) as necessary
by pressing SPEED repeatedly.
5. Play the tape or disc in the external component.
If you have a TV attached to your unit,
you can see the video playing.
6. Press z (RECORD) once to start recording.
The REC indicator lights in the display window.
7. Press x (STOP) to stop recording.
Notes:
•
Before recording, confirm the recording start
position.
•
If your source is copy-protected using
CopyGuard, the recorded contents may not be
played properly. See Copyright on page 7 for
more details.
•
To record for a fixed length of time, see Instant
Timer Recording.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Each press of the OK changes the TV screen in the
following sequence.
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
STOP
SP
1. Insert the disc you wish to copy into the DVD
deck and close the disc tray.
JAN 1 , MON
2:15 PM
2. Insert a blank VHS video tape into the VCR deck.
2:15 PM
0:35:40
3. Find the place on the DVD from which you want
to start dubbing using the PLAY, FF, REW and
PAUSE functions.
REM 1:58
For best results, pause playback at the point from
which you want to record.
Real-Time Counter
If a tape with contents recorded on it is inserted into
the VCR, the real-time counter shows length of the
tape running in hours, minutes, and seconds. Press
DISPLAY to select the real-time counter display.
Every press of DISPLAY changes the TV screen as
illustrated below.
4. Press the z (RECORD). The DVD goes into
PLAY mode and the VCR goes into RECORD
mode. If the DVD disc menu appears, you may
need to press N (PLAY) manually to begin copy-
ing.
5. When the DVD is finished playing,
press x (STOP) to end copying.
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
REMAINING TIME
Notes:
•
You must stop the copy process manually when
the DVD movie ends, or the unit may replay and
record over and over again.
Counter Memory
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
•
When you stop the DVD playback during copying,
the recording on VCR is stopped automatically.
1. Begin recording or playing a tape.
2. Press DISPLAY until the real-time counter is dis-
played on the TV screen.
3. At the point that you want to locate later, reset the
real-time counter to “0:00:00” by pressing CLEAR.
On-Screen Display - VCR
4. Continue to play or record.
Some of these functions will be displayed every time
the unit is operated.
5. Press x (STOP) when recording or playback
finishes.
❶
❷
6. Press M (FFW). The tape automatically stops
when the tape counter returns to about “0:00:00”.
PLAY
SP
Tape Remaining
This function displays the amount of time remaining
on the tape during recording or playback.
Press DISPLAY repeatedly until the REM indicator
displays on the TV screen during recording or
playback.
JAN 1 , MON 2:15 PM
The remaining tape length may not be displayed cor-
rectly depending on the condition of the tape and the
kind of the tape (T-140, T-160, or T-210 etc.).
❸
❹
❶ TAPE SPEED DISPLAY
❸
DATE DISPLAY
❷ FUNCTION DISPLAY
❹ CLOCK/ COUNT/
REMAIN DISPLAY
Notes:
•
•
•
The function displays can be seen displayed on
the TV screen for 5 seconds.
The clock (or tape counter, tape remaining) mode
will be displayed until you press OK.
The tape counter and the remaining tape length
indicator appear only when a cassette is inserted.
Also, the remaining tape length indicator appears
after any tape operation.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional VCR Information
•
During manual recording playback, or fast forward
modes, the unit automatically starts rewinding the
tape at the end of the tape. The cassette stops at
the beginning of the tape and is ejected.
•
After you have finished using the unit, rewind,
eject, and remove the cassette. Place the cas-
sette in its protective sleeve to protect it from
dust. It is not necessary to rewind the cassette
before removing it, but if you do, it is ready to play
or record the next time you use it.
•
Do not attempt to hook up more than one televi-
sion set to the unit for either recording or
playback.
VCR Auto Play System
This unit features automatic playback.
When you load a tape with the safety tab removed
the following occurs:
•
•
•
•
The Output Source is changed to VCR mode
automatically.
The power turns on automatically and playback
begins.
At the end of the tape, the unit stops, then
rewinds.
The tape is ejected after rewinding and the turns
itself off automatically.
Note:
Auto power off does not function during regular DVD
play mode. (unit power stays on.)
S-VHS Quasi Playback (SQPB)
•
This unit can play back S-VHS recorded tapes,
however, it cannot make recordings using S-VHS
format tapes.
•
SQPB is an abbreviation for S-VHS Quasi
Playback.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
General features
Buttons
Operations
Discs
ALL
/ (OPEN / CLOSE)
X (PAUSE/STEP)
Opens or closes the disc tray.
During playback, press X to pause playback.
Press X repeatedly to play Frame-by-Frame.
ALL
DVD
VCD
./> (PREV/NEXT) During playback, press . or > to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
ALL
ACD
MP3
ACD
Press . twice briefly to step back to the previous
chapter/track.
WMA
MP3
DVD
VCD
m/M (REW/FFW)
During playback, press m or M repeatedly to select
the required scan speed.
DVD disc; 4 steps
Video CD, MP3, Audio CD ; 3 steps
DVD
VCD
ALL
While the playback is paused, press M repeatedly to
play in slow motion (4 steps).
(FFW Only)
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD discs: Chapter/Title/Off
Video CD, Audio CD, MP3/Windows MediaTM Audio
discs: Track/All/Off
A-B (REPEAT)
ZOOM
Press the A-B (REPEAT) button one at time to select a
point A and point B and repeats a sequence from point
A (Starting point) to point B (End point).
DVD
DVD
VCD
VCD
ACD
During playback or pause mode, press ZOOM to
enlarge the video image (3 steps).
You can move through the zoomed picture using b B v
V buttons. Press CLEAR to exit.
SHUFFLE
TITLE
During playback or in stop mode, press SHUFFLE for
random playback.
ACD
DVD
MP3
WMA
If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appears.
DISC MENU
ANGLE
The disc menu appears on the screen.
DVD
DVD
During playback of DVD disc that contains scenes
recorded at different camera angles, press ANGLE
repeatedly to select a desired angle.
SUBTITLE
AUDIO
During playback, press SUBTITLE repeatedly to select a
desired subtitle language.
DVD
DVD
During playback, press AUDIO repeatedly to hear a dif-
ferent audio language or audio track.
VCD
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on general features:
VCD1.1
Last Scene Memory DVD
• If you press > (NEXT) once during Repeat
Chapter (Track) playback, the repeat playback
cancels.
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
• Zoom may not work on some DVDs.
• When you are playing a DVD disc that contains
scenes recorded different camera angles, the angle
indicator will blink on the TV screen during the
operations as an indication that angle switching is
possible.
Note:
This player does not memorize the scene of a disc if
you switch off the player before commencing to play
the disc.
• The A-B repeat function is available only in the
current track.
Screen Saver
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes.
Additional features
Time Search DVD
VCD
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
4. Press OK to confirm. Playback starts from the
selected time.
Marker Search DVD
To enter a Marker
VCD
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press OK and playback starts from the marked
scene. Or, Press CLEAR and the marker number
is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3/
Windows MediaTM Audio file
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
This unit can play Audio CDs or MP3/Windows
MediaTM Audio files.
1. Insert an Audio CD or MP3/Windows MediaTM
Audio files recorded media. AUDIO CD or MUSIC
menu appears.
MP3/Windows MediaTMAudio/Audio CD
Once you insert an MP3/Windows MediaTM Audio
files recorded media or Audio CD, a menu appears
on the TV screen.
E
2. Press PROGRAM and the
mark will appear.
Press v / V to select a track/file then press N
(PLAY) or OK and playback starts. You can use vari-
able playback functions. Refer to page 25-26.
Note:
Press PROGRAM again to exit the program edit
E
mode, then the
mark will disappear.
3. Select a track on the “List”, then press OK to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
4. Select the track you want to start playing on the
“Program” list.
5. Press N (PLAY) or OK to start. Playback begins
in the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
ID3 TAG
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY.
6. To resume normal playback from programmed
playback, select a track on the list and then press
N (PLAY).
[ Song, Artist, Album, Comment, Genre ]
Tips:
Repeat Programmed Tracks
• Press DISC MENU to move to the next page.
Press REPEAT to select a desired repeat mode.
• On a CD with MP3/Windows MediaTM Audio, JPEG
and MOVIE file, you can switch MUSIC, PHOTO
menu. Press TITLE, and MUSIC and PHOTO word
on top of the menu is highlighted.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Note:
If you press > (NEXT) once during Repeat Track
playback, the repeat playback cancels.
MP3 / Windows MediaTM Audio disc compatibility
with this player is limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (Windows MediaTM Audio)
• Bit rate: within 8 - 320kbps (MP3),
Erasing a Track from “Program” List
1. During STOP mode, press PROGRAM and
E
the
mark will appear.
64 - 192 kbps (Windows MediaTM Audio)
• The player cannot read an MP3/Windows
MediaTM Audio file that has a file extension as non
other than “.mp3” / “.Windows MediaTM Audio”.
• CD-R physical format should be ISO 9660
• If you record MP3 / Windows MediaTM Audio files
using software that cannot create a file system
(eg. Direct-CD) it is impossible to playback MP3 /
Windows MediaTM Audio files. We recommend
that you use Easy-CD Creator, which creates an
ISO 9660 file system.
2. Use v V b B to select the track that you wish to
erase from the Program list.
3. Press CLEAR. Repeat step 1~3 to erase addition-
al tracks on the list.
Erasing the Complete Program List
1. During STOP mode, press PROGRAM and
E
the
mark will appear.
2. Use v V b B to select “Clear All”, then press OK.
Note:
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .Windows
MediaTM Audio extension.
The programs are also cleared when the power is off
or the disc is removed.
• They should not contain special letters such as / ?
* : “ < > l etc.
• The total number of files in a folder should be less
than 1000 files.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving to another File
Viewing a JPEG file
Press . (PREV) or > (NEXT) or cursor (b or
B) once while viewing a picture to advance to the
next or previous file.
This unit can play JPEG files.
1. Insert a JPEG files recording media. The PHOTO
menu appears on the TV screen.
Zoom
During watching pictures, press ZOOM to enlarge the
video image (3 steps).
You can move through the zoomed picture using b B
v V buttons.
Rotating the picture
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
2. Press v / V to select a folder, and press OK.
A list of files in the folder appears.
3. If you want to view a particular file, press
v / V to highlight a file and press OK or N
(PLAY).
JPEG disc compatibility with this player is limit-
ed as follows:
4. To return to the PHOTO menu while watching pic-
tures, press x (STOP).
• Depending upon the size and the number of
JPEG files, it could take a long time for the DVD
player to read the disc’s contents. If you do not
see an on-screen display after several minutes,
some of the files may be too large — reduce the
resolution of the JPEG files to less than 5 million
pixels and burn another disc.
Note :
Some kind of special JPEG file can be taken more
time to play than normal JPEG.
(ex. Progressive JPEG)
Tips:
• The total number of files in a folder should be less
than 1000 files.
• If you are in a file list and want to return to the pre-
vious Folder list, use v / V buttons to highlight
and press OK.
• Some discs may be incompatible due to a differ-
ent recording format or the condition of disc.
• Press DISC MENU to move to the next page.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• There are three Slide Speed options
(Fast), >> (Normal) and > (Slow).
: >>>
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
Use v V b B to highlight . Then, use b / B to
select the option you want to use then press OK.
• On a CD with MP3/Windows MediaTM Audio and
JPEG file, you can switch MUSIC and PHOTO
menu. Press TITLE, and MUSIC word on top of the
menu is highlighted.
• File names without “.jpg” extension will not be
able to be read by this DVD player. Even though
the files are shown as JPEG image files in
Windows Explorer.
• While watching a picture, press O (BACK) to hide
the help menu.
Slide Show
Use v V b B to highlight the
press OK.
(Slide Show) then
Still Picture
1. Press X (PAUSE/STEP) during slide show.
The player will now go into PAUSE mode.
2. To return to the slide show, press N (PLAY) or
press X (PAUSE/STEP) again.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format Disc
Maintenance and Service
This unit will play DVD-R/RW discs that are recorded
using the DVD-Video format that have been finalized
using a DVD-recorder.
Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
This unit will play DVD-RW discs that are recorded
using the Video Recording (VR) format.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
1. Insert a disc and close the tray, and playback start
automatically.
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
2. Press TITLE to move to the list menu.
3. Press v / V to select a track then press N
(PLAY) or OK and playback starts.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the sur-
faces are extremely dirty, use a soft cloth lightly mois-
tened with a mild detergent solution.
4. Press x (STOP) to stop the playback.
Notes:
• Unfinalized DVD-R/RW discs cannot be played in
this player.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
• Some DVD-VR disc are made with CPRM data by
DVD RECORDER. Player does not support these
kinds of discs and display the “CHECK DISC”.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished.
What is ‘CPRM’?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Bengali; Bangla
Bhutani
Bihari
Hebrew
Hindi
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Area Codes
Choose an area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
Brazil
NL
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Kuwait
Libya
Luxembourg
PT
RO
El Salvador
LU
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall out-
let securely.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
No picture
ꢀ The TV is not set to receive unit signal
output.
ꢀ Select the appropriate video input
mode on the TV so the picture from
the unit player appears on the TV
screen.
ꢀ The video cable is not connected
securely.
ꢀ Check the connection.
ꢀ Wrong cable connection.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the unit.
ꢀ The equipment connected with the
audio cable is not set to receive unit sig-
nal output.
Distorted or no sound.
ꢀ Connect the audio cable into the jacks
securely.
ꢀ The audio cables are not connected
securely.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Set the AUDIO options to the correct
position.
ꢀ The AUDIO options are set to the wrong
position.
ꢀ Clean the disc.
ꢀ The disc is dirty.
The playback picture is
poor.
ꢀ Check tuning, carry out tuning again.
ꢀ The TV channels are not tuned in
properly.
ꢀ Clean video heads.
ꢀ Tape heads are dirty.
ꢀ Use v/V (TRK +/-) for manual track-
ing adjustment while tape is playing.
ꢀ Tape is a rental or was recorded on
another VCR.
The unit does not start
playback.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a playable disc. (Check the disc
type and Regional code.)
ꢀ An unplayable disc is inserted.
ꢀ Place the disc with the playback side
down.
ꢀ The disc is placed upside down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc on the disc tray cor-
rectly inside the guide.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Cancel the Rating function or change
the Rating level.
ꢀ The Rating level is set.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause
Correction
ꢀ Eject the tape in.
Symptom
ꢀ Is the cassette compartment empty?
Video tape cannot be
inserted.
No Hi-Fi sound
ꢀ Audio mode is not set properly.
ꢀ Select STEREO by repeatedly pressing
AUDIO on the Remote Control.
Remote Control
The
does not work properly.
ꢀ There is an obstacle in the path of the
Remote Control and this unit.
ꢀ Remove the obstacle.
ꢀ The batteries in the Remote Control
are exhausted.
ꢀ Replace the batteries with new ones.
ꢀ The Remote Control is not pointed at
the remote sensor of the unit.
ꢀ Point the Remote Control at the remote
sensor of the unit.
ꢀ The remote control is too far from the
unit.
ꢀ Operate the Remote Control within 23ft
(7m).
ꢀ This Remote Control use the same
buttons for VCR and DVD functions
(ex.PLAY).
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
Camcorder image is
not shown.
ꢀ Turn camcorder on and operate
properly.
ꢀ Camcorder is off.
Camcorder image via
AV input to unit is not
shown on TV screen.
ꢀ Unit SOURCE SELECT is not set to
LINE1 or LINE2.
ꢀ Press INPUT to select LINE input
channel (LINE1 or LINE2).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
120V, 60 Hz
16 W
16.9" X 3.1" X 10.2" (430 X 79 X 260 mm) (w x h x d)
8.8 lbs (4.0 kg)
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
Power consumption
Dimensions (approx.)
Net Weight (approx.)
Operating temperature
Operating humidity
Signal system
NTSC
Inputs
VHS VIDEO IN(LINE1, 2)
VHS AUDIO IN(LINE1, 2)
1 V (p-p) 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2
Outputs
VIDEO OUT
S-VIDEO OUT
1 V (p-p) 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (analog audio)
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1
VCR Specifications
Head system
Timer
Tape speed
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 3 minutes (T-120)
20 Hz to 20 kHz
More than 43 dB
More than 88 dB
More than 60 dB
Tape width
Maximum recording time
Rewind time
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
DVD Specifications
Laser system
Frequency response
Semiconductor laser, wavelength 650 nm
DVD (PCM 96 kHz): 8 Hz to 44 kHz,
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 90 dB (ANALOG OUT jacks only)
Less than 0.02%
More than 95 dB (DVD/CD)
Accessories:
Video cable x 1, Audio cable (L/R) x 1, Remote control x 1, Batteries (R03/AAA) x 2
Note : Design and specifications are subject to change without prior notice.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|