Polk Audio DVD Player DR 3 User Manual

DR-3

UNIFIED LEARNING

REMOTE CONTROL

INSTRUCTION

MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

DR-3 REMOTE GUIDED TOUR

See the chart on page 6 for the functions of each button with

various device types.

1. Source/Device Area – These buttons serve two functions:

to select the device that the remote will control and to change

inputs on the Digital Solution preamp/processor. For example if

you want to play the DVD player, push the “DVD” button on the

top row. The Digital Solution preamp/processor will switch to the

DVD input (if it is on) and the buttons on the DR-3 remote will be

set to operate the DP-1 CD/DVD player.

The top buttons bordered by the gold box are multi-function

buttons. That is, they can select more than one input. Press the

DVD/6CH button once and it selects the DVD input on the pre-

amp/processor and allows the DR-3 to act as the remote for the

DP-1 CD/DVD player. Press it a second time and the DS preamp

switches to the 6CH Analog input for a DVD-Audio or multi-chan-

nel SACD player. What these buttons can’t do is select more than

one set of remote codes. You can program ONE device per Source

button. Don’t worry, it isn’t very likely that you are going to have

both a digital and an analog cable tuner or two DVD players

hooked up to your system. Of course, before the DR-3 can operate

any device other than the DS preamp/processor and DP-1 CD/DVD

player, you have to insert the device’s remote codes into the DR-3.

(See page 7 for instructions on how to program and use this

remote for other devices.)

Status

Light

IMPORTANT NOTE: The VOL

, SURROUND MODE,

MUTE, SUB+ and SUB– buttons are permanently assigned to

Digital Solution preamp/processor functions. No matter what

other device you have selected on the DR-3 remote, you can

always adjust the DS system volume, subwoofer level, mute

and surround mode functions.

2. LIGHT – Back lights the remote buttons for 8 seconds so you can

operate the remote in the dark. The function of this button does

not change when you enter program codes for other devices.

3. MUTE – Mutes the sound of the Digital Solution preamp/proces-

sor system. To disengage the mute function and go back to normal

playback volume, press the MUTE button again or press either of

the VOLUME buttons. The function of this button does not change

when you enter program codes for other devices.

4. SURROUND MODE – This button toggles between the various

audio modes of the Digital Solution system such as stereo, Dolby

Pro-Logic, 5 Channel Surround, etc. The function of this button

does not change when you enter program codes for other devices.

5. VOL

– These buttons control the volume of the Digital

Solution preamp/processor. The functions of these buttons do not

change when you enter program codes for other devices.

6. CHNL

– With the Digital Solution system these buttons

step through the preset radio stations just like the Radio Preset

+/- rocker buttons on the DR-2 remote (included with the DS

System). With other TV devices (TV, cable boxes, VCR, etc.)

these buttons act as channel up and down buttons.

7. GUIDE

– With DVD and CD players this button acts as a

chapter skip button to skip back to previous DVD chapters or

CD tracks. With a TV it acts as the “Display” button to call up

the channel, time and other on-screen display data. With DSS,

cable boxes and TIVO-type devices it calls up the programming

guide screen.

www.polkaudio.com

Download from Www.Somanuals.com. All Manuals Search And Download.

8. MENU

– This button acts as a chapter skip button to skip

forward through DVD chapters or CD tracks. With TVs and other

video devices it calls up the device menu.

9. PAUSE – This button acts as the pause/step frame button for

the DP-1 CD/DVD player, VCRs, CD players and TIVO-type video

storage devices. To return to normal play, press the PLAY button.

With DSS and cable tuner boxes and the Multi-room function of

the Digital Solution system, it acts as the up arrow navigation

button for the on-screen display.

10. REW – With DVD, CD, VCR and TIVO-type players, this button

acts as a rewind or back button. For DSS, cable boxes, TVs and

the Multi-room function of the Digital Solution system, it acts as

the left navigation button for on-screen displays.

11.ENTER/PLAY – With DVD, CD, VCR and TIVO-type players, this

button acts as a Play button. With all devices it acts as the Enter

button to select items on an on-screen display.

12.FF – With DVD, CD, VCR and TIVO-type players, this button acts

as a fast-forward or forward button. For DSS, cable boxes, TVs

and the Multi-room function of the Digital Solution system, it acts

as the right navigation button for on-screen displays.

13.STOP – With DVD, CD, VCR and TIVO-type players, this button

acts as the Stop button. For DSS, cable boxes, TVs and the Multi-

room function of the Digital Solution system, it acts as the Down

navigation button for on-screen displays.

14.• DISC /CLEAR – Acts as the Clear command for CD and DVD

players. Acts as the Record button for all recording devices such

as VCR, TIVO, etc. (The little red dot means “record”.) This button

has no function with the Digital Solution preamp/processor.

15.^ TV/VCR – This button opens and closes the disc drawer of CD

and DVD players. It acts as the (TV/VCR) input toggle switch on

TVs and VCRs and other video devices. It has no function with the

Digital Solution preamp/processor.

16.Numeric Keypad – Acts just like the number keypad on all other

devices. These buttons have no function with the Digital Solution

preamp/processor. The +10 button acts as the Previous Channel

function on cable boxes and TVs. With CD players it acts as the

Repeat button.

17.SUB+ and SUB- – These buttons raise and lower the volume of

the Digital Solution subwoofer just like the SUBWOOFER +/- but-

tons on the DR-1 & DR-2 remotes. The function of these buttons

does not change when you enter program codes for other devices.

18.Tune+/SET-UP – Acts as the manual “tune up the dial” control for

the radio of the Digital Solution system and calls up the Setup

menu of a DVD player. For the function on other devices see the

chart on page 6.

19.SCAN/DVD MENU – With the Digital Solution tuner this acts as

the Preset Scan button. With DVD players it calls up the DVD

software menu.

Polk customer service (800) 377-7655

Download from Www.Somanuals.com. All Manuals Search And Download.

20.TUNE-/SUB TTL – Use to manually tune the radio on the Digital

Solution system. Acts as the Subtitle toggle switch on DVD play-

ers. For the function on other devices see the chart on page 6.

21.SELECT – This button selects a choice on a menu such as the

set up menu of a DVD player or the title menu of a DVD disc.

With DSS and cable boxes it acts to call up “Favorites.” It has

no function with the Digital Solution preamp/processor.

22.AUDIO – This button toggles through the available audio tracks

on a DVD. For example, if a DVD disc has a 2 Channel audio track,

a Dolby Digital 5.1 and a French language track, each time you

push this button, the next available audio track will play. This

eliminates the hassle of going back to the DVD’s main menu to

change the audio type. This feature may not work with all DVDs

and players.

23.

NAVIGATION – These buttons allow you to

move among setup menus to select operations. For example if

you are looking at a DVD’s main title menu and you want to move

to the Scene Selection menu, push the appropriate arrow button

to move to the Scene Selection graphic on the TV screen.

–

24.BK SLOW

With most DVD players, use this button to

make the DVD play at a slower than normal speed backwards.

–

25.SLOW

With most DVD players, use this button to make

the DVD play at a slower than normal forward speed.

26.ANGLE – Acts to toggle between available camera angles on

selected DVDs. Acts as the “Live TV” button on TIVO-type boxes.

27.ZOOM – This button serves as the “Zoom” button with DVD

players that have a zoom feature.

28.Program Area – These four buttons allow you to program in the

codes for other remotes or “teach” the remote specific commands.

They cannot be reprogrammed for any other functions. See pages

7 - 11 for specific programming instructions.

29.SOURCE POWER – This button acts as the on/off button for the

other components in your system once you have entered their

remote codes into the DR-3. See pages 7 - 11 to learn how to pro-

gram the DR-3 to operate other devices.

30.SYSTEM POWER – This button turns on and off the Digital

Solution system only. This function does not change when you

enter program codes for other devices

31.MACRO – The MACRO button can send out a sequence of up to

20 commands with one button press. It can be programmed for

up to eight Source buttons. This allows you to perform multi-step

operations with just one button-push. For example, you can pro-

gram the MACRO button to turn on the TV, turn on the DS system,

turn on the DVD player, select the correct Video input, and open

the DVD drawer with the push of just one button. See pages 12 -

13 for Macro programming instructions.

www.polkaudio.com

Download from Www.Somanuals.com. All Manuals Search And Download.

DR-3 FUNCTION LIST

Button Name

FM/AM

DVD/6CH

DSS

CBL/CBL DIG

AUX/TAPE

MULTI

VCR

Polk DVD Others

CBL

TAPE/AUX (Toggle)

DVD/6CH (Toggle)

DSS/DSS DIG (Toggle)

CBL/CBL DIG (Toggle)

FM/AM (Toggle)

MULTI

VCR

LIGHT

MUTE

MODE

VOL UP

VOL DN

CH +

LIGHT

MUTE

MODE

VOL UP

VOL DN

CH +

LIGHT

MUTE

MODE

VOL UP

VOL DN

CH +

MUTE

MODE

VOL UP

VOL DN

CH +

SURROUND MODE

VOL UP

MODE

VOL UP

VOL DN

MODE

VOL UP

VOL DN

MODE

VOL UP

VOL DN

MODE

VOL UP

VOL DN

MODE

VOL UP

VOL DN

VOL UP

VOL DN

PRESET UP

PRESET DN

VOL DN

CHNL UP

CHNL DN

CH -

UP/PAUSE

PAUSE

STOP

PAUSE

STOP

PAUSE

STOP

PAUSE

STOP

DOWN/STOP

DOWN

RIGHT

LEFT

DOWN

RIGHT

LEFT

DOWN

RIGHT

LEFT

DOWN

RIGHT

LEFT

RIGHT/FF

LEFT/REW

ENTER/PLAY

GUIDE/I<<

MENU/>>I

REC/DISC>

/TV/VCR

SCAN +

SCAN -

PLAY

SCAN +

SCAN -

PLAY

REW

SELECT

GUIDE

EXIT

SELECT

GUIDE

EXIT

SELECT

DISPLAY

STD

PLAY

ENTER

PLAY

SKIP -

SKIP +

Clear

SKIP -

SKIP +

Clear

SKIP -

SKIP +

DISC >

OPEN/CLOSE

1 to 0

REPEAT

SCAN

SUB +

SUB -

RECORD

VCR/TV

OPEN/CLOSE OPEN/CLOSE TV/DSS

BYPASS

1 to 0

PRE-CH

ENTER

SUB +

SUB -

Page+

Page-

FAV

TV/VCR

1 to 0

PRE-CH

ENTER

SUB +

SUB -

1 to 0

PRE-CH

ENTER

SUB +

SUB -

ALT

PLUS10

SCAN/DVD MENU

SUB +

PRE-SCAN

SUB +

TOP MENU MENU

SUB +

SUB -

SUB +

SUB -

SUB +

SUB -

SUB +

SUB -

SUB+

SUB-

SUB -

TUNE +/SET-UP

TUNE -/SUB TTL

Select

TUNE +

TUNE -

SET-UP

SUB TTL

SELECT

LEFT

SET UP

SUB TTL

SELECT

LEFT

FAV

LEFT

INFO

RIGHT

ANGLE

AUDIO

BK SLOW

DOWN

SLOW

ZOOM

CODE

SAVE

RIGHT

ANGLE

PLAY MODE

RETURN

DOWN

SLOW

ANGLE

AUDIO

BK SLOW

DOWN

SLOW

ZOOM

CODE

SAVE

CODE

SAVE

CODE

SAVE

CNCL

LEARN

POWER

LEARN

POWER

MACRO

LEARN

POWER

MACRO

LEARN

POWER

MACRO

LEARN

POWER

MACRO

LEARN

POWER

MACRO

LEARN

POWER

MACRO

LEARN

POWER

MACRO

LEARN

POWER

LEARN

POWER

MACRO

SYSTEM POWER

SOURCE POWER

MACRO

Polk customer service (800) 377-7655

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING THE REMOTE

Manual Three-Digit Code Method

The DR-3 remote control can duplicate the remote functions of most

brands of audio/video equipment by simply entering in a three-digit

code number. When you enter in the code the DR-3 “learns” most or all

of the remote functions of that equipment so you don’t need to program

the DR-3 button by button. There are tables on pages 14 - 15 that list

the major audio/video brands and their three-digit remote codes.

Quick Instructions

1. Look up code number

2. Turn on equipment

3. Press and hold CODE until the Status Light glows red

4. Press Source/Device button

5. Enter code number

6. Press SAVE

Detailed Instructions

1. Look up the type and brand of equipment you wish to duplicate in

the tables that appear on pages 14 - 15 in this manual. For exam-

ple, if you wish to program the DR-3 to operate a Panasonic VCR,

go to the VCR chart on page 15 and find the code(s) for Panasonic.

It might be a good idea to jot that number down on this page so you

have it handy as you move through the programming steps.

Note: If there is more than one three-digit number listed for your

brand, try one code number at a time until your equipment turns

off after the last step in the programming process. When your

equipment turns off, you have selected the right code. You can also

verify that you have programmed the correct three-digit number by

pressing the SOURCE POWER button. Your equipment should turn

On and Off.

2. Turn on the equipment you wish to program.

NOTE: From here on in you have 20 seconds to perform each step.

If the Source/Device button light goes off, you need to back up a

step and do it again. You can exit the set-up mode by pressing the

CNCL (cancel) button at any time in the process.

3. Press and hold the CODE button for two seconds. The red status

light at the top left of the remote will turn on.

4. Press the Source/Device button you wish to program (e.g. VCR,

DVD, etc.). The Source button will light up. In the case of the

Panasonic VCR example, you would push the VCR Source button.

5. Point the Polk DR-3 remote control toward the equipment and enter

the first listed three-digit code number of your brand of equipment.

The Status light and the Source/Device button will blink once for

each button pressed. The equipment will turn off when you enter

the correct three-digit number.

6. Press and hold the SAVE button for 2 seconds to store the three-

digit number. The Status light and the Source/Device button light

will blink twice to confirm that the code has been stored, and then

turn off.

7. Try all the functions on the remote control.

NOTE: If any of the functions do not work as they should, repeat

the programming process using the next three-digit code number

assigned to your brand. If only one or two buttons don’t work right,

it may be easier to individually “teach” the DR-3 those commands

(see page 9) or use the Auto Search method (see page 8) rather

than trying all the three-digit codes.

www.polkaudio.com

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING THE REMOTE

Auto Search Method

If none of the three-digit code numbers assigned to your brand shut off

your equipment or if your brand of equipment is not listed in the code

tables, you can use the Auto Search Method to find the correct three-

digit number for your equipment.

1. Turn on the equipment you wish to program.

NOTE: From here on in you have 20 seconds to perform each step.

If the Source/Device button light goes off, you need to back up a

step and do it again. You can exit the set-up mode by pressing the

CNCL (cancel) button at any time in the process.

2. Press and hold the CODE button for two seconds. The red status

light at the top left of the remote will turn on.

3. Press the Source/Device button you wish to program (e.g. VCR,

DVD, etc.). The Source/Device button light will turn on.

4. Press and hold the CH UP or CH DOWN button. The remote will

emit a series of Power On/OFF code signals that are stored in its

memory. Release the CH button as soon as the equipment turns off.

You can verify that you have chosen the correct code by pressing

the SOURCE POWER button, the device should turn On and Off.

The status light and the Source/Device button will blink.

5. Press and hold the SAVE button for two seconds to store the code.

The status light and the Source/Device button light will blink twice

and then turn off to confirm that the code has been stored.

Note: You can verify that you have chosen the correct code by press-

ing the SOURCE POWER button, the device should turn On and Off.

The status light and the Source/Device button will blink.

Finding the Three-Digit Code Number for a Device

If you are curious which three-digit code was auto-assigned to a given

Source button follow these steps:

1. Turn on the equipment you wish to operate.

2. Press and hold the CODE button for two seconds. The red status

light at the top left of the remote will turn on.

3. Press the Source/Device button for which you want to find the

three-digit number. The Source/Device button light will turn on.

4. Press the GUIDE button. The red status light and Source button

will blink indicating the number for each digit of the three-digit

code number. Each digit is separated by a 1 second “off ” interval

of the light.

Example: One blink, LIGHT OFF, Three blinks, LIGHT OFF and

Eight blinks, indicates that the three-digit code number 138 is

stored in the remote for that device. Note: Ten blinks are equal

to the number 0.

Polk customer service (800) 377-7655

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING THE REMOTE

Teaching Method

From time to time the three-digit programming method doesn’t

automatically program in all of the commands of the original remote.

In such cases you can “teach” the DR-3 individual commands from

your original equipment remote control. New commands can be taught

to any button except the eight Source/Device buttons at the top of the

remote and the LIGHT, MACRO, LEARN, CODE, SAVE, CNCL, MUTE,

SURROUND MODE, VOL UP, VOL DOWN, SUB+, SUB– and SYSTEM

POWER buttons.

The remote control provides visual feedback via the status light that

is located at the top left of the remote control, and the Source/Device

buttons. The status light glows in three colors (red, orange and green).

These lights will assist you in programming in the learning section of

the remote control.

NOTE: You have 20 seconds to perform each step. If the source button

light goes off, you need to back up a step and do it again. You can exit

the learning mode by pressing the CNCL (cancel) button at any time in

the process.

Quick Instructions

Place the DR-3 remote and the original remote controls on a table

pointing toward each other as shown in the illustration.

1. Press LEARN for two seconds

2. Select device type with source buttons

3. Push button to be taught on the DR-3

4. Push and hold the button on other remote

5. Wait for green light

6. Release button & press/hold it again until green light blinks, release

7. Repeat steps 3 - 6 for other buttons

8. Press SAVE

Start from the beginning for each device.

Detailed Instructions

Place the DR-3 remote and the original remote controls on a table

pointing towards each other as shown in the illustration.

1. Press and hold the LEARN button on the DR-3 for two seconds.

6. Press the button on the source remote control once again to

The status light at the top left of the remote will glow orange.

verify that the new command has been learned correctly. The

status light on the DR-3 will flash green twice and then turn to

a steady orange color to indicate that the programming was

successful. The Source/Device button will light.

2. Select the Source/Device mode in which you would like to teach

the new command. The Source/Device button will light up. For

example if you wanted to teach a command to the MENU button

in the DSS mode on the remote, you would select the DSS

Source/Device button and then continue the instructions below

to teach the new command to the MENU button.

7. Repeat Steps 3 through 6 for any other buttons to be taught in

the device mode selected in Step 2.

8. Press and hold the SAVE button for two seconds to save the

programmed information. The orange status light flashes twice.

The Source/Device button light will turn off.

3. Press the button on the DR-3 that is to be taught the new com-

mand. The orange status light will begin to flash continuously.

The Source/Device light will turn off.

4. On the source remote control (original equipment remote control),

press and hold the button for the command to be learned until the

status light on the DR-3 remote turns green.

5. Release the button on the source remote control.

www.polkaudio.com

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING THE REMOTE

Erasing a Learned Command From a Button

NOTE: You have 20 seconds to perform each step. If the source button

light goes off, you need to back up a step and do it again. You can exit

by pressing the CNCL (cancel) button at any time in the process.

1. Press and hold the LEARN button for two seconds.

The status light at the top left of the remote will glow orange.

2. Press the Source/Device associated with the button you wish

to erase. The Source/Device button light will turn on.

3. Press the button that is to be erased. The orange status light will

flash continuously and the Source/Device button will turn off.

4. Press the LIGHT button. The status light will flash twice, then

turn to a steady orange. The Source/Device button will turn on.

5. Repeat from Step 3 for any other buttons to be erased in the

selected device mode.

6. To save your changes, press the SAVE button. The orange status

light will flash twice and then turn off. The Source/Device button

will turn off.

To Erase All the Learned Commands

in One Source/Device Mode:

NOTE: You have 20 seconds to perform each step. If the source button

light goes off, you need to back up a step and do it again. You can exit

by pressing the CNCL (cancel) button at any time in the process.

1. Press and hold the LEARN button for two seconds.

The status light at the top left of the remote will glow orange.

2. Press the Source/Device button you wish to erase.

The Source/Device button light will turn on.

3. Press and hold the LIGHT button for 5 seconds until the status

light flashes red five times and then flashes green twice and the

Source/Device button turns off. The status light will go to a constant

orange indicating that all the learned information on buttons in the

Source/Device mode have been erased. The Source/Device button

will turn on.

4. To save your changes, press the SAVE button. The orange status

light will flash twice and then turn off. The Source/Device button

will turn off.

Polk Customer Service (800) 377-7655

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING THE REMOTE

Erasing All the Learned Commands

in All Device Modes

This procedure will erase all the learned commands on all the buttons

in all eight Source/Device modes. Be really, really sure you want to do

this before following the steps below.

1. Press and hold the LEARN button for two seconds.

The Status light at the top left of the remote will glow orange.

2. Press and hold the LEARN button again for 10 seconds. The

Status light will flash red continuously. The status light will then

flash green once, orange once then turn off, indicating that all of

the learned commands in all of the Source/Device modes on the

remote control have been erased.

Restoring Factory Programming

If you want to restore the DR-3 to it’s original programming and oper-

ation, press the LIGHT and POWER buttons simultaneously for 10

seconds. The red status light will blink while the remote is resetting.

It will confirm the reset by blinking green and then orange.

1,2

www.polkaudio.com

Download from Www.Somanuals.com. All Manuals Search And Download.

MACRO OPERATION

Programming the Macro Button

The MACRO button can send out a sequence of up to 20 commands

with one button press. It can be programmed for up to eight Source

button macros and perform multi-step operations with just one button

push. For example, you can program the MACRO button to turn on the

TV, turn on the DS system, turn on the DVD player, select the correct

Video input, and open DVD drawer with the push of one just button.

Each Source/Device button can have an associated Macro program.

That means you can set up as many as 8 Macros. You cannot set up

two different Macros for the same Source/Device button even though

the top row buttons can select two inputs. Let’s give you an example:

the 6CH/DVD Source/Device button can select either the 6 Channel

or the DVD input, but only 1 Macro.

Before you begin the Macro programming process, you first have to

program all of your system’s equipment into the DR-3 remote. Use

any of the methods described earlier in this manual to fully program

the DR-3 remote. It is a good idea to use your DR-3 remote for a few

days to familiarize yourself with its basic operation before setting

up MACRO operations.

Planning the sequence of commands is very important. For example,

some devices (especially TVs) will not accept other commands until

they are fully turned “on.” You may have to turn on all the devices

first, then give them other commands later in the sequence. You may

need to try different command sequences to get to the right result.

See the example on page 13 to get a feel for programming a Macro.

NOTE: You have 20 seconds to perform each step. If the Source button

light goes off, you need to back up a step and do it again. You can exit

the set-up mode by pressing the CNCL (cancel) button at any time in

the process.

1. Press and hold the CODE button for two seconds. The status light

at the top left of the remote will turn red.

2. Press the desired Source/Device button. The button will light up.

3. Press the MACRO button. The status light and the Source/Device

button will blink once.

4. Press up to 20 commands you would like to include in the macro

sequence starting with the Source button. Pressing a Source

button to change modes is counted as one command.

5. Press the SAVE button to store the commands. The red status light

and the Source button lights will blink twice and then turn off to

confirm the program.

To Erase a Macro Sequence:

Follow the above Steps 1, 2, 3 and 5 without going through Step 4.

Polk Customer Service (800) 377-7655

Download from Www.Somanuals.com. All Manuals Search And Download.

MACRO OPERATION

Macro Sequence Programming Example:

Confused? Don’t worry, it isn’t as bad as it looks. Let’s walk you

through a hypothetical Macro sequence to show you how it works.

In this example, we are programming the DVD source Macro button

to turn on the TV, the Digital Solution system and the DVD player as

well as select the DVD player as the source to view. In this case,

we are assuming that you have programmed the TV codes into the

CBL Source/Device.

2,7

1. Press and hold the CODE button for two seconds. The status light at

the top left of the remote will glow red.

2. Press the DVD Source button. The DVD Source button will light up.

3. Press the MACRO button. The red status light and the DVD button

lights will blink once.

4. Press the CBL Source button

5. Press the SOURCE POWER button to select the TV’s

power command.

6. Press the SYSTEM POWER button to select the Digital Solution’s

power command.

7. Press the DVD source button.

8. Press the SOURCE POWER button to select the DVD’s

power command

5,8

9. Press and hold the SAVE button until the red status light and the

Source button lights will blink twice and then turn off to confirm

the program.

In this example the sequence is important. The DVD turn-on command

should be the last command in the Macro string, so that the Digital

Solution system’s input is on.

Factory Reset

If you want to restore the DR-3 to it’s original programming and

operation, press the LIGHT and POWER buttons simultaneously

for 10 seconds. The red status light will blink while the remote is

resetting. It will confirm the reset by blinking green and then orange.

www.polkaudio.com

Download from Www.Somanuals.com. All Manuals Search And Download.

SETUP CODES

Manufacturer/Brand

Set-Up Code Number

Manufacturer/Brand

Set-Up Code Number

Tape/Aux

PHILIPS TIVO

SONY TIVO

Cable (TV)

SPECTRICON

001

002

112

004 043

SSS

SYLVANIA

001 003 059 060 063 064

164 160 127

052

DVD Player

GOLDSTAR

HARMAN KARDON

HITACHI

JVC

MAGNAVOX

MARANTZ

MITSUBISHI

MYRYAD

NAD

057 074 091

084

101

SYMPHONICS

TANDY

TATUNG

TECHNICS

TECHWOOD

TEKNIKA

081

056 062

034 080

004

003 004 024 028 043

072 101 143

072

172

012

057 074 091

066 096

083 095

017

102

088

TELERENT

TERA

TMK

004

NAKAMICHI

ONKYO

PANASONIC

PHILIPS

PIONEER

POLKAUDIO

PROCEED

PROSCAN

RCA

103

TOSHIBA

TOTEVISION

UNIVERSAL

VIDEO CONCEPTS

VIDIKRON

VIDTECH

VORK

015 030 040 062 101

035 076

021 042

066 083 095

023 092 099 107 108

001

143

008

146

174

004

086

026 027

056 070

094

WARDS

004 008 009 019 028

060 061 063 064 072 074 164

076

001 004

WESTING HOUSE

YAMAHA

SAMSUNG

SHARP

YUPITERU

ZENITH

ZONDA

043

SONY

TATUNG

THOMPSON

TOSHIBA

YAMAHA

ZENITH

033

102

026 027

034 035

042 089

057 074 091

072 073 095 103

112

CARVER

DENON

FISHER

H/K

167 041 135 138 139 050 203

205 226

016

047 033 208 046

136 163 004

007 055 023 137 016

044 041

147

215 005 178

218

DSS Player

ECHOSTAR

HITACHI

HUGHES

MITSUBISHI

PANASONIC

RCA

006

JVC

011 012

003 022 031

003 022

013

001 014 015

004

KENWOOD

MARANTZ

MONDIAL

NAD

NAKAMICHI

NIKKO

SONY

TOSHIBA

046

003 008

ONKYO

038 168 030 062 169

068 172

041

010 020 174

017 021

187

171

051 173

166 096

225 097 126 133

079 140

Cable (Cable)

GENERAL INSTRUMENT

HAMLIN

JERROLD

NSC

OAK

PANASONIC

PIONEER

REGENCY

SCIENTIFIC ATLANTA

TOCOM

PANASONIC

PHILIPS

PIONEER

RCA

REALISTIC

SANSUI

SHARP

SHERWOOD

SONY

TEAC

201 230

216 218 223

211 222 229

220 221

209 217 224 226 227 228

213 215

208 231 232

219

202 206 212 214 233

203 210

TECHNICS

VICTOR

YAMAHA

ZENITH

068 008 172

004

012 186 183 046

204 207 225

ZENITH

204 207 225

Polk customer service (800) 377-7655

Download from Www.Somanuals.com. All Manuals Search And Download.

SETUP CODES

Manufacturer/Brand

VCR

AIWA

Set-Up Code Number

Manufacturer/Brand

VCR

OPTONICA

Set-Up Code Number

034 161

053 054

AKAI

AMPRO

ANAM

043 046 124 142 146

072

031 103

012 023 043

035 037 129

028 031

108

001 040 135

031 041

117 005 116 010 017 108

108

012 023 043

034 053

PANASONIC

PENTAX

PHILCO

PHILIPS

PILOT

PIONEER

PORTLAND

PULSAR

QUARTZ

RADIO SHACK

RCA

031 070 133 140

004 020 031 063

031 034 067

031 067 034 054 101

101

004 021 048

108

072

014

101 123

144 147 107 109 031 004 020

034 040 041 140 158

001 008 010 014 031 034 040

053 054 101

AUDIO DYNAMICS

BROKSONIC

CANON

CAPEHART

CRAIG

CUIRTIS MATHES

DAEWOO

DAYTRON

DBX

REALISTIC

DYNATECH

ELECTROHOME

EMERSON

059

RICO

058

072

014

006 029 035 153 017 025 005

116 027 031 034 036 037 046

101 129 131 138"

001 008 009 010

034

031 063 072 107 109 144 147

132 136 151

004 012 020 101 123

012 045

026 150 018 034 043 063 137

031

004 012 040 101

043

031 043 048 012 055 060 130

150 152

014 034 048 047

034

034 001 004 009 017 101

040

067 031 034 041 068 154 164

067 069 012 031

101

027

031

040 101 001 010 014 031 034

053 072 134 139

045 046 059

004 020

059 061 004 020 046 051 142

034 040

024 034

012 023 043 048

043

RUNCO

SALORA

SAMSUNG

SANSUI

SANYO

SCOTT

FISHER

FUNAI

017 040 107 109 113 115 124

043 048 135

001 010 040 014 134

017 037 129 131

017 081 001 004 008 009 010

014 020 101

053 031 054 165

024

GO VIDEO

GOLDSTAR

HARMAN KARDON

HITACHI

INSTANTREPLAY

JCL

JCPENNY

JENSEN

JVC

SEARS

SHARP

SHINTOM

SONY

056 057 058 001 009 031 052

053 155 002

034

SOUNDESIGN

STS

SYLVANIA

SYMPHONIC

TANDY

TATUNG

TEAC

TECHNICS

TEKNIKA

THOMAS

TMK

004

031 034 059 067

034

010 034

043

034 043

031 070

031 034 101

034

KENWOOD

LLOYD

LXI

MAGIN

MAGNAVOX

MARANTZ

MARTA

MATSUI

MEI

006

TOSHIBA

017 131 004 008 059

082 150 047

040 101

040

012

MEMOREX

TOTEVISION

UNITECH

VECTOR RESEARCH

VICTOR

VIDEO CONCEPTS

VIDEOSONIC

WARDS

MGA

MINOLTA

MITSUBISHI

MTC

MULTITECH

NEC

048

012 034 046 141

040

001 004 017 024 031 034 040

053 054 131

005

012 034 043

NORDMENDE

WESTINGHOUSE

YAMAHA

ZENITH

072 034 048 056 058 080

101 153

www.polkaudio.com

Download from Www.Somanuals.com. All Manuals Search And Download.

5601 METRO DRIVE,

BALTIMORE, MARYLAND 21215, USA,

410-764-5275, FAX: 410-764-5266

www.polkaudio.com

RM2070-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Perlick Refrigerator R24S User Manual
Philips CRT Television 15PT2767 User Manual
Philips Flat Panel Television SA4VD404 User Manual
Philips MP3 Player UDA1334BT User Manual
Philips Speaker System AW2000 User Manual
Polaris Offroad Vehicle Scrambler 50 User Manual
Poulan Snow Blower PP927ESC User Manual
Poulan Trimmer S17DE User Manual
Pride Mobility Mobility Aid GC2 User Manual
ProForm Treadmill 831295040 User Manual