Always there to help you
Register your product and get support at
Question?
Contact
Philips
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1 Important
2
Safety
Notice
2
3
2 YourWireless Hi-Fi Speaker
Introduction
4
4
4
4
5
What's in the box
What else you need
Overview of the main unit
3 Prepare
6
6
6
Connect to an existing speaker system
Connect power and switch on
4 Connect AW2000 to your home
Wi-Fi network
7
7
8
Option 1: Set up wired connection
Option 2: Set up wireless connection
5 Play
10
10
Stream audio to AW2000
Listen to Internet radio stations
through AW2000
11
12
Play from an external device
6
Upgrade firmware
13
7 Product information
15
15
Specifications
8 Troubleshooting
16
EN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
i Do not expose the product to dripping /
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
1 Important
Notice
splashing water, rain or high humidity.
j Keep this product away from direct
sunlight, naked flames or heat.
k Do not install near any heat sources
such as radiators, heat registers, stoves,
or other electrical equipment (including
amplifiers).
Safety
This product complies with the radio
interference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Information for Europe:
Know these safety symbols
l Do not place any other electrical
equipment on the product.
m Do not place any sources of danger
on the product (e.g. objects containing
liquids, burning candles).
n Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
The device can be operated in the EU without
restrictions indoor, but cannot be operated
outdoors in France in the whole of the band
until further notice.
This product complies with the requirement of
the 1999/5/EC directive.
Android is a trademark of Google Inc. Use of
this trademark is subject to Google permissions.
The 'exclamation mark' calls attention to
features for which you should carefully read the
supplied literature to prevent operating and
maintenance problems.
The 'lightening bolt' symbol indicates
uninsulated components within the product
that can cause an electric shock.
To reduce the risk of fire or electric shock, do
not expose the product to rain or moisture and
do not place any objects filled with liquids, such
as vases, on the product.
Warning
Class II equipment symbol:
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight, naked
flames or heat.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
Modifications
Modifications not authorized by the
manufacturer may void user's authority to
operate this product.
CLASS II apparatus with double insulation, and
no protective earth provided.
Note
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Risk of overheating! Never install this apparatus
in a confined space. Always leave a space of
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
• The type plate is located on the bottom of the
apparatus.
d Follow all instructions.
e Do not use this product near water.
f Clean only with dry cloth.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not remove the casing of this product.
2
EN
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2 YourWireless
Hi-Fi Speaker
What else you need
Overview of the main unit
Note
p
o n
m
• To enjoy music, connect AW2000 to an existing
speaker system through the SPEAKER CONNECTOR
L/R (+/-) sockets.
• To have better sound effect, you can also connect a
subwoofer to the SUBWOOFER socket on the back
of AW2000.
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
bottom of the apparatus.Write the numbers
here:
To stream audio wirelessly to AW2000, you
need:
e f g
d
h i jkl
a
b
•
•
a certified Wi-Fi router
an iOS or Android device, such as an
iPod touch/iPhone/iPad or an Android
phone or tablet; or a PC/Mac enabled
with Wi-Fi
Model No. __________________________
Serial No. ___________________________
c
•
the Philips AirStudio app available on
Apple App Store (for iOS devices)
or Google Play Store (for Android
devices)
j OPTICAL socket
a Power indicator/button
•
Connect an external audio device to
AW2000 through an optical cable (not
supplied).
Introduction
•
Show the current status of the unit.
•
Turn the unit on/off.
With this wireless Hi-Fi link device connected
to an existing speaker system, you can:
Connect AW2000 to the same local network
as your iOS/Android device or PC/Mac through
the Wi-Fi router.
b Source selection keys
k ETHERNET socket
(Optional) Connect to a wireless
•
stream audio from your iOS or
Android device.
•
Select an audio source directly.
•
router through an Ethernet cable (not
supplied).
c Volume knob
•
•
listen to Internet radio stations.
stream audio from a PC/Mac installed
with Media Manager downloaded from
play music from other audio devices
through the AUX IN (L/R), MP3-LINK,
COAXIAL or OPTICAL socket.
•
Adjust volume.
•
•
Connect an external audio device to
AW2000 through a coaxial cable (not
supplied).
f AC IN ~ socket
What's in the box
•
Connect the power cord.
g SPEAKER CONNECTOR L/R (+/-)
Check and identify the contents of your
package:
o MP3-LINK
Connect an external audio device to
sockets
•
•
Wireless Hi-Fi link device with built-in
Wi-Fi
h Connect AW2000 to an existing speaker
AW2000 through a 3.5mm audio cable
(not supplied).
system. socket
•
•
•
2 x AC power cords
Quick start guide
Safety sheet
•
Connect a headphone.
p SUBWOOFER socket
Connect a subwoofer for better sound
effect.
i AUX IN L/R sockets
•
•
Connect an external audio device
through RCA audio cables (red/white;
not supplied).
4
EN
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Prepare
4 Connect
AW2000 to
Connect power and switch
on
Always follow the instructions in this chapter in
sequence.
Caution
your homeWi-
Fi network
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
• Risk of electric shock! When you unplug the AC cord,
always pull the plug from the socket. Never pull the
cord.
Connect to an existing
speaker system
There are two options for you to set up
connection between AW2000 and your existing
home Wi-Fi network.
• Before you connect the AC cord, make sure that you
have completed all the other connections.
Before connection of AW2000 to you home
Wi-Fi network, make sure that:
•
Wired connection
Use an Ethernet cable (not supplied) to
connect AW2000 to your home Wi-Fi router
directly.After successful connection, you can
enjoy wireless streaming to AW2000 through
your home Wi-Fi network.
a yourWi-Fi router is powered on and
working properly.
b AW2000 is powered on and the
power indicator stays amber steadily.
AC IN
~
Option 1: Set up wired
connection
1 Unscrew the speaker connectors.
2 Insert fully the end of a speaker cable with
•
•
Connect the AC power cord to:
red mark into the left red (+) connector.
12V=1A
T
o
Modem
LAN4
LAN3
LAN2
LAN1
Reset
•
the AC IN ~ socket on the back of
the unit.
3 Screw the left red (+) connector to secure
the cable.
•
the wall power socket.
•
Wireless connection
» The unit switches on automatically.
4 Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
ETHERNET
ETHERNET
Apply your home Wi-Fi settings to AW2000
from an iOS or Android device. Once
connected successfully,AW2000 will remember
your home Wi-Fi settings.Then you can enjoy
wireless streaming whenever AW2000 is
powered on and connected to your home Wi-
Fi network automatically.
» The power indicator blinks amber, and
after a while turns to solid amber.
5 Screw the left black (-) connector to
To switch the unit to normal standby
mode, press .
» The power indicator turns green.
secure the cable.
6 Repeat steps 2-5 to insert the other
•
Connect an Ethernet cable (not supplied)
to:
speaker cable into the right connectors.
•
•
To switch the unit to Eco power standby
mode, press and hold .
To switch the unit on from normal or Eco
power standby mode, press again.
•
the ETHERNET socket on the back of
the unit
one of the Ethernet ports on your
home Wi-Fi router
•
6
EN
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: Set up wireless
connection
1 (For iPod touch/iPhone/iPad users) Install
Philips AirStudio from Apple App Store
and run the app.
•
(For users of Android smartphones or
tablets) Install Philips AirStudio from
Android Market and run the app.
3 Check the power-on status of your
AW2000 as instructed, then tap Next to
continue.
2 Tap Setup a new speaker, read the general
4 Follow the on-screen instructions until
successful setup of Wi-Fi connection
between AW2000 and your home Wi-Fi
network.
setup steps, then tap Next to continue.
8
EN
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream from your PC/Mac
5 Play
Listen to Internet radio
stations through AW2000
To stream music from your PC/Mac to
AW2000, first install a media sharing software
(such as Media Manager available on www.
philips.com/mediamanager) onto your PC/Mac.
In this way, your PC/Mac can work as a media
sharing server that streams music to compliant
players.
1 Run Philips AirStudio on your iOS or
Android smartphone or tablet.
Stream audio to AW2000
2 Tap Services -> Philips AW2000.
Note
1 Download Media Manager from www.
• Make sure that your iOS/Android device or PC/Mac is
connected to the same Wi-Fi network as AW2000.
philips.com/mediamanager.
2 Install Media Manager onto your PC/Mac
with the license key available on the quick
start guide.
Stream from your iOS or Android
smartphone or tablet
3 Run Philips AirStudio on your iOS or
4 Select a song from the list to start play.
Android smartphone or tablet.
4 Hold and drag the icon of your PC/
Mac towards the speaker to set up Wi-Fi
connection.
1 Run Philips AirStudio on your iOS or
Android smartphone or tablet.
2 Hold and drag the icon of your device
towards the speaker to set up Wi-Fi
connection.
3 Tap Internet Radio to select the Internet
radio source.
5 Tap the icon of your PC/Mac to show
music available for streaming.
6 Select a song from the list to start play.
Tip
4 Follow the on-screen instructions to tune
• You can also control music play from the media sharing
software on your PC/Mac.
3 Tap the icon of your device to show music
to your favorite radio stations.
available for streaming.
10 EN
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press SOURCE or AUX on AW2000
repeatedly (or tap MP3Link on the home
screen of the app) to select the 3.5mm
audio input source.
6 Upgrade
firmware
3 Use the controls on your audio device to
control music play.
To improve the performance of AW2000,
Philips may offer you new firmware for upgrade
of your AW2000.
Connect through the
OPTICALorCOAXIALsocket:
1 Connect an optical or coaxial cable (not
supplied) to:
Warning
•
the OPTICAL or COAXIAL socket on
the back of the unit.
• Always connect your AW2000 to AC power for
firmware upgrade. Never power off your AW2000
during firmware upgrade.
•
the corresponding digital output socket
on an external audio device.
2 Press SOURCE or AUX on AW2000
repeatedly (or tap Digital-In Coaxial or
Digital-In Optical on the home screen of
the app) to select the optical or coaxial
audio input source.
5 Tap Firmware upgrade -> Check Online
1 Make sure that AW2000 is powered on
and connected to the same Wi-Fi network
as your smartphone or tablet.
to check for new firmware.
Tip
• You can add your favorite stations to the preset list
as instructed on the app.Then, you can press the
numeric keys (1-5) on AW2000 directly to tune to the
corresponding radio station.
2 Run Philips AirStudio on your iOS or
Android smartphone or tablet.
3 Use the controls on your audio device to
control music play.
3 Hold and drag the icon of your device
towards the speaker to set up Wi-Fi
connection.
Connect through the AUX IN L/Rsockets:
1 Connect a pair of RCA audio cables (red/
white; not supplied) to:
Play from an external device
•
the AUX IN L/R sockets on the back
of the unit.
You can also listen to an external audio device
through the unit.
•
the audio output sockets on an
external audio device.
Connect through the MP3-LINKsocket:
2 Press SOURCE or AUX on AW2000
repeatedly (or tap AUX-IN on the home
screen of the app) to select the AUX IN
L/R audio input source.
1 Connect a 3.5mm audio cable (not
supplied) to:
•
the MP3-LINK socket on the back of
the unit.
6
If a new firmware is available, tap OK to
start download and installation of the new
firmware until completion of the process.
3 Use the controls on your audio device to
•
the headphone socket on an external
audio device.
control music play.
MP3 LINK
4 Tap Services -> Philips AW2000.
12 EN
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Consumption in
Standby Mode
Dimensions
- Main Unit (W x D x H)
Weight
< 0.5 W
7 Product
information
330 x 205 x
258 mm
6.7 kg
- With Packing
- Main Unit
5.5 kg
Note
• Product information is subject to change without prior
notice.
Specifications
Amplifier
Rated Output Power
Frequency Response
2 X 13 W RMS
80 Hz - 18 kHz, ±3
dB
Signal to Noise Ratio
MP3 Link
> 86 dB
1000 mV RMS 20
kohm
Wireless
Wireless
standard
Wireless
security
Frequency
range
802.11b/g
WEP (64 or 128 bit),
WPA/WPA2 (8-63 characters)
2412 - 2462 MHz (CH1-CH11)
(for /79, /37, /55, /97)
2412 - 2472 MHz (CH1-CH13)
(for /12, /10, /05)
PBC (one
Yes
button push)
General information
AC power
100 ~ 240V,
50/60 Hz
25 W
Operation Power
Consumption
14 EN
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Turn off other Wi-Fi routers.
8 Troubleshooting
Wi-Fi network connection failed
•
Check if your Wi-Fi router is Wi-Fi
802.11b/g certified.This device is only
compatible with Wi-Fi 802.11b/g certified
routers.
Music streaming failed with PC/Mac
•
Temporarily disable the firewall and
security software to see whether it blocks
the ports that the media sharing software
(Media Manager) uses to stream content.
See the help documentation of your
firewall and security software on how to
unblock the ports used by wireless media
sharing.
When you use iPodTouch/iPhone/iPad/PC/
Mac for music streaming, if the music play
breaks or stops, try to restart your iPod
Touch/iPhone/iPad, media sharing software,
or AW2000.
Warning
• Never remove the casing of this apparatus.
•
If your Wi-Fi router is Wi-Fi 802.11n
certified, make sure to enable the
802.11b/g mode.AW2000 does not
support connection to routers with
802.11n only.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
•
This device does not support the WPS-
PIN method.
•
•
•
•
Enable SSID broadcast on the Wi-Fi router.
Keep away from potential sources of
interference which may affect Wi-Fi signal,
such as microwave ovens.
Video streaming or FTP downloads may
overload your router and therefore may
cause interruptions during music streaming.
Try to reduce the load of your router.
•
Make sure that the SSID name of your
home router consists of alphanumeric
characters, with no space or special
characters like %/#/* inserted.
No power
•
Make sure that the AC power plug of the
device is connected properly.
Make sure that there is power at the AC
outlet.
•
•
•
If you choose to rename your AW2000
manually on the Philips AirStudio app, do
not use special characters or symbols.
For some new types of Wi-Fi routers, a
network name (SSID) may be created
automatically when you use WPS for
connection.Always change the default
network name (SSID) to a simple one that
consists of alphanumerical characters, and
also change the Wi-Fi security mode to
secure your network.
No sound or poor sound
•
Adjust volume on the Philips AirStudio
app,AW2000, or the existing audio system
connected to AW2000.
•
If you have selected the wired connection,
check whether the Ethernet cable has
been connected properly and securely
(see 'Option 1: Set up wired connection'
on page 7).
•
•
Check the Wi-Fi network connection.
Set up the network again if needed (see
'Option 2: Set up wireless connection' on
page 8).
If the audio source is an external audio
player, adjust volume on the audio player
directly.
Occasional breaking of music streaming
Do one or all of the following:
•
•
Move AW2000 closer to your Wi-Fi router.
Remove any obstacles between AW2000
and your Wi-Fi router.
•
•
Avoid using Wi-Fi channel which is
overlapped by the nearby Wi-Fi network.
Check if your network speed is fast enough
(in cases where multiple devices share the
same router, the wireless performance may
be affected).Turn off the other devices
connected to your home router.
No response from the unit
•
Restart AW2000, and then set up the Wi-
Fi network for AW2000 again (see 'Option
2: Set up wireless connection' on page 8).
Disconnect and reconnect the AC power
plug, and then switch on the device again.
•
•
Enable the Quality of Service (QoS)
option (if available on the Wi-Fi router).
16 EN
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
|