Planar Car Video System LX1200TI User Manual

LX1200TI  
Touch Monitor  
USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Usage Notice  
Precautions.................................................................................................................................5  
In a Vehicle..............................................................................................................................5  
Cleaning the Monitor..........................................................................................................5  
Introduction  
About the Product ...................................................................................................................6  
Front View ...............................................................................................................................6  
Bottom View...........................................................................................................................8  
Features....................................................................................................................................9  
Package Overview.................................................................................................................10  
Installation  
Before Installing.....................................................................................................................11  
Step 1 - IRtouch Software Installation........................................................................12  
Step 2 - Mounting the Monitor.....................................................................................16  
Step 3 - Connecting the Monitor.................................................................................17  
User Controls  
Front Panel Controls.............................................................................................................19  
Turning the Monitor On and Off......................................................................................20  
Using the Touchscreen........................................................................................................20  
Navigating the Touchscreen..............................................................................................20  
Cleaning the Monitor...........................................................................................................21  
Appendix  
Troubleshooting the Monitor ...........................................................................................22  
Specifications ........................................................................................................................23  
Product Dimensions.........................................................................................................23  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Video Specifications .........................................................................................................23  
Electrical Specifications...................................................................................................23  
Electromagnetic Compatibility (EMC) .......................................................................24  
Immunity Characteristics................................................................................................24  
Safety .....................................................................................................................................24  
Environmental Specifications .......................................................................................25  
Connectors...........................................................................................................................25  
Addendum A...........................................................................................................................27  
Support and Service.............................................................................................................29  
4
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usage Notice  
WARNING – To prevent the risk of fire or shock hazards, do not expose  
this product to rain or moisture.  
!
!
WARNING – Please do not open or disassemble the product as this may  
cause electric shock. Doing so will void the warranty.  
ATTENTION – Do not plug the touchscreen in yet! Install the touch-  
screen driver first!  
!
Precautions  
To maximize the life and safe use of your unit, always be sure to follow the  
warnings, precautions and maintenance recommendations in this user’s guide.  
In a Vehicle:  
• The monitor should be visible to the driver only if it is used for  
navigation, system control or vehicle information. If the monitor  
will be used for other purposes, it should be installed in a such a  
way that it will only operate while the vehicle is not moving (such  
as when the parking brake is in use), or so that its display is not  
visible to the driver. Review all applicable state and local laws and  
regulations to make sure the monitor is used properly and safely.  
• Avoid using the monitor for extended times while the vehicle is  
not running, or the monitor could drain the vehicle’s battery.  
Cleaning the Monitor:  
• Always turn off the unit before cleaning.  
• Use a soft cloth moistened with mild detergent, isopropyl alcohol, or  
window cleaners to clean the display housing.  
• Never use abrasive cleaners, waxes or solvents to clean the unit.  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Introduction  
About Planar’s LX1200TI Touch Monitor  
The LX1200TI, is a high-performance, rugged touch monitor intended for  
demanding environments, such as those inside motor vehicles. The monitor  
features a 12.1-inch diagonal liquid crystal display with XGA resolution, bright  
enough to be read in full sunlight. The monitor also includes stereo speakers  
and a sturdy magnesium enclosure that can withstand shock and vibration.  
Front View:  
1
11  
8
2
5
6
7
4
3
10  
9
6
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front View (Descriptions):  
1. 12.1-inch diagonal XGA screen size.  
2. Programmable SoftKeys  
3. Volume control  
4. USB port (Type A, accessible from the front) for connecting a peripheral  
device (a second connection is on the back)  
5. Remote PC Shutdown/Start button  
6. Brightness control - allows you to easily adjust the screen to the light  
condition and to quickly hide the information on the screen  
(“screen blanking”)  
7. Autosync  
8. Backlight On/Off  
9. Power Indicator LED:  
• Green: DC Power on, Video on, Backlight on  
• Red: No video input, DC Power on, Backlight on  
• Off: DC power off or Backlight off  
10. Backlight On/Off LED:  
• Green: Backlight on, DC Power on, Video on  
• Red: Backlight off, DC Power on, Video on  
• Off: DC power off or Video off  
• Backlight button will also restart the touchscreen if needed.  
11. Touchscreen provides an intuitive software interface  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Bottom View:  
4
3
2
1
5
6
7
8
9
10  
Bottom View (Descriptions):  
1. Brightness control dial  
2. USB port (Type A, accessible from the front) for connecting a peripheral  
device  
3. Volume control dial  
4. Speaker (on each side)  
5. USB port (Type A, accessible from the front) for connecting a peripheral  
device  
6. USB port (Type B) for connecting the touchscreen to the remote  
computer  
7. VGA Signal Input  
8. 12 VDC Power Input  
9. Power Interrupt Connector  
10. Audio Input (3.5mm jack plug)  
8
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
• The brightness control allows you to easily adjust the display to match  
the ambient light, from full sunlight to night, even while wearing  
gloves. Its convenient dial design also enables you to quickly adjust the  
brightness.  
• The monitor’s transflective display uses reflected light from the  
environment - even direct sunlight - to provide a bright image that can  
be easily viewed under any lighting conditions.  
• The monitor’s autosync function eliminates the need for adjusting the  
monitor for the best image - the monitor automatically makes any  
needed adjustments whenever it is powered up or the display mode is  
changed.  
Backlight On/Off Button allows for the monitor to instantly go dark for  
security or safety reasons. The LED under the Backlight Button will be  
the only one lit (at a reduced brightness level) to allow the user to find  
it in the dark state. Backlight button will also restart the touchscreen if  
needed.  
• Two Type A USB connections are available for connecting peripheral  
devices such as a keyboard, mouse or USB drive.  
• The monitor supports standard VGA signal input - native 1024 x 768  
XGA resolution - as well as 800 x 600 SVGA and 640 x 480 VGA.  
• The monitor’s magnesium enclosure has a waterproof front and  
designed to withstand shock and vibration for greater endurance and  
reliability.  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Package Overview  
The following items are shipped with the display. If any of these items are not in  
the shipping container, please contact Planar.  
LX1200 Touch Monitor  
SoftKey Software and  
Touchscreen Driver  
Installation CD  
Quick Start Guide  
Cables:  
Power input and remote PC.  
Hardware: 5 mounting screw and cable dressing attachments.  
Other:  
Power supply and connecting cables are sold separately.  
10  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Before Installing  
Keep the following in mind while installing the monitor.  
• The monitor should be visible to the driver only if it is used for  
navigation, system control or vehicle information. If the monitor will be  
used for other purposes, it should be installed in such a way that it will  
only operate while the vehicle is not moving (such as when the parking  
brake is in use). Review all applicable state and local laws and  
regulations to make sure the monitor is used properly and safely.  
• The installed monitor must not interfere with the driver’s vision.  
Installing the LX1200TI monitor consists of three steps:  
1. Installing the touchscreen driver software - see page 12  
2. Mounting the monitor using the mounting interface built into the  
monitor’s back cover - see page 16  
3. Connecting the monitor to the computer and power source - see page 17  
Note: Installing the SoftKey Macro Software - see page 27  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Step 1 - IRtouch Software Installation  
IMPORTANT – Do not plug in the touchscreen yet! Install the driver first.  
!
1. Run IRtouch driver setup from the LX1200TI CD  
2. Accept user agreement  
3. Install in default location  
12  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Click Install  
5. Click continue, you can trust Planar and IRtouch  
6. Click on Finish  
Attach the Planar monitor to the system or install the computer to a  
docking station. After the USB cable from the Planar LX1200TI is  
attached to the computer (see next section - Connecting the Monitor) it  
will recognize the touchscreen for the first time.  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
7. Continue  
8. Click Finish  
9. Click the IRtouch icon located on your desktop to calibrate the touch  
monitor.  
10.Click Calibrate  
14  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11.Set Modes  
When used in rugged environments with software written for  
touchscreens, you may find it easier to use the ‘click on releaseradio  
button.  
12.Beep  
You can set the computer to beep on touch activation if needed.  
13.If touchscreen driver ever needs to be uninstalled for any reason this  
can be achieved by re-running the setup executable and following  
the steps.  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Step 2 - Mounting the Monitor  
The back of the LX1200TI includes a mounting interface that you can use to  
mount the monitor on a swing arm or other LCD monitor fixture, as follows.  
IMPORTANT – For optimal results, use the M4 mounting holes around  
the edges of the monitor.  
!
1. Mount the fixture in its planned location according to the instructions  
included with the fixture.  
2. Attach the monitor to the fixture using the attachments on the back of  
the monitor, shown in the following diagram.  
Note: Use only a Planar-approved mounting bracket for in-vehicle use.  
Mounting bracket and hardware are not included with the monitor,  
and must be obtained separately.  
Use the proper M4 x 0.7 screws for attaching the monitor to the  
mounting fixture.  
For low-vibration environments, the back of the monitor includes a  
VESA Standard 100mm mounting pattern.  
16  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3 - Connecting the Monitor  
Once the LX1200TI is mounted in place, connect it to the computer (or other  
video source) and the 12 VDC power supply as follows.  
Note: This procedure refers to connections to and from the computer.  
However, depending on your particular hardware configuration, these  
connections may be to a dock or other device rather than directly to  
the computer.  
1. As needed, route any data and power cables from the computer to the  
monitor.  
2. Make sure the computer is turned off.  
3. Connect the 12 VDC power supply cable to the monitor’s power supply.  
Note: Use a 5-Amp fuse in line to the power source.  
Also, to prevent vehicle battery from draining, you should install a  
device that shuts off power to the monitor while the monitor is  
inactive. (An example is Lind Electronic’s Vehicle Battery Voltage  
Shutdown Timer - www.lindeletronic.com).  
4. Connect the power supply and power interrupt cables (for the  
All-in-One power switch, if your computer or docking station is so  
equipped) to the connectors on the bottom of the monitor. See the  
following diagram for connector locations.  
Speaker Vent  
USB Type A  
Volume Dial  
Dimming Dial  
USB Type A  
VGA  
Audio  
Remote PC Shutdown/Start  
Power 12 V  
USB Type B Upstream  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Note: If needed, connect an audio cable to the audio port on the monitor, and  
to the headphone or audio line output connector on the computer.  
If an external keyboard or other USB device will be used with the  
monitor, plug it into either of the monitor’s Type A USB connectors.  
Two USB devices can be connected to the monitor.  
The following figure shows typical connections.  
Keyboard  
(optional)  
12V  
Power Source  
USB  
VGA  
Remote PC Shutdown/Start  
Audio  
Computer  
5. Turn on power to the computer. The monitor then turns on as soon as it  
receives a video signal from the computer, and its LED turns green.  
Also, the first time the monitor is powered up, it automatically displays  
a test pattern of repeating colored screens (black, white, red, green, and  
blue) until a video signal is detected.  
6. Install the monitor’s driver software and configure the monitor’s touch  
screen as needed.  
Note: For best results, adjust the display mode of the computer to a  
resolution of 1024 x 768 and a refresh rate of 60 Hz.  
18  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Controls  
Front Panel Controls  
Backlight On/Off Button  
Backlight Indicator LED  
Softkeys  
Autosync  
Brightness/Backlight Control  
Remote PC Power Button  
Volume Control  
Power Indicator LED  
CONTROL  
FUNCTION  
Volume Control Dial  
Increases and decreases the volume of the display  
Remote PC Power Button  
Turns the connected computer on and off - see page 20 for  
details. Easy way to reboot PC.  
Power Indicator LED  
Shows the power state of the monitor:  
• Green: power is on, all systems OK  
• Red: the monitor is receiving no video input  
• Off: DC power off or Backlight off  
Brightness Control Dial  
Increases and decreases the brightness of the display. Turning  
the dial all the way clockwise will “blankthe display to hide  
information if needed.  
Backlight On/Off Button  
Backlight Indicator LED  
Allows the screen and LEDs to be shut off for dark mode.  
Backlight button will also restart the touchscreen if needed.  
Shows the power state of the Backlight:  
• Green: all systems OK  
• Red: Backlight off  
• Off: DC power off or no Video input  
Autosync  
Auto calibration of video mode  
Softkey Buttons  
Allows macro keyboard command entry  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Turning the Monitor On and Off  
The monitor’s power button controls power to the computer. The monitor  
itself turns its display on and off according to whether it is receiving a video  
signal.  
• To turn on the computer, press the remote PC shutdown/start button  
on the front of the monitor. The monitor then turns on when it receives  
a good video signal from the computer (and the monitor’s power  
indicator turns from red to green).  
• To turn off the computer, press the remote PC shutdown/start button  
again.  
Note: Be sure to configure the computer’s power options, including how the  
computer responds, when the button is pressed. See Windows on-line  
help for details.  
The monitor goes into standby whenever the computer is put into  
sleep or into hibernation.  
Using the Touchscreen  
The LX1200TI touchscreen allows you to operate the computer by touching  
the screen with a finger or stylus, rather than using a mouse or keyboard.  
Navigating the Touchscreen  
• To click an item, tap the item once.  
• To double-click an item, tap the item twice rapidly.  
• To drag an item, touch the item, and then drag it along the screen to the  
new location.  
• To move the cursor, touch the screen and move the cursor as needed.  
20  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning the Monitor  
Clean the monitor’s touchscreen periodically to keep the display image bright  
and sharp, and to keep the touchscreen functions working properly.  
• Always turn off the monitor before cleaning.  
• Clean the touchscreen only with a dry soft cloth. If this does not clean  
the screen adequately, use water or mild glass or window cleaner  
(that does not contain ammonia) applied to the cloth and not to the  
display.  
CAUTION – Do not apply liquids to the display.  
!
• Clean the monitor housing with a soft cloth moistened with mild  
detergent, 70% isopropyl alcohol, 1.6% aqueous ammonia, or  
household window cleaners.  
• Never apply abrasive cleaners, waxes or solvents to the monitor.  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Appendix  
Troubleshooting the Monitor  
If you are experiencing trouble with the LX1200TI monitor, refer to the  
following. If the problem persists, please contact your local dealer or our  
service center.  
Problem: No image appears on screen  
• Make sure the brightness is not turned all the way down.  
• Make sure all data and power cables are properly connected to the  
monitor and to the computer and power supply - see page17 for details.  
• Make sure the pins on the cables and connectors are not crooked or  
broken.  
• Make sure the computer is functioning properly, and has not entered  
power-saving mode. (You may also want to disable the computer’s  
power-saving feature.)  
Problem: Partial image or incorrectly displayed image  
• Make sure the computer’s image resolution is set to one of these  
resolutions: 1024 x 768 (XGA), 800 x 600 (SVGA) or 640 x 480 (VGA).  
Problem: Image is scrolling  
• Check and make sure the VGA signal cable (or adapter) is securely  
connected at both ends.  
Problem: No sound  
• Make sure the volume is not turned completely down.  
• Make sure the audio cable is securely connected at both ends.  
• Make sure the computer’s audio is not muted.  
Problem: The monitor does not appear to respond to the touchscreen  
• Make sure the USB cable to the computer is securely connected at both  
ends.  
22  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Dimensions  
Size: 313mm (12.3”) width x 267mm (10.5”) height x 46mm (1.8”) thickness  
Screen Size: 12.1-inch Diagonal  
Weight: 5 kg maximum  
Video Specifications  
Input: Standard VGA (15-pin Analog)  
Resolution: XGA (1024 x 768), supports SVGA (800 x 600) and VGA  
(640 x 480)  
Response Time: <35 ms (typical)  
Viewing Angle: 140° horizontal, 45° up, 55° down (typical)  
Brightness: 315 cd/m2, transflective panel (typical)  
Brightness in high ambient light conditions: 1100 cd/m2  
Contrast: >250:1 at ambient illumination level > 5 lux (typical)  
Autosync: On power-up and any change of video mode, will  
automatically detect any supported video resolution and display the  
image accordingly.  
Electrical Specifications  
Power Input: 12 VDC nominal  
Power Input Voltage Range: 8 to 24 VDC, with transient protection  
resident on the monitor  
Maximum Power: 25 W  
Typical Power: Less than 17 W  
Power Consumption in Power-Saving (standby) Mode: 1.0 W (typical)  
Speaker/Amplifier Power: 2 W per speaker  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Electromagnetic Compatibility (EMC)  
• ESD, 6 kV contact and 8 kV air discharge  
• Emissions  
47 CFR. Part 15, Subpart B, Class B - Conducted and Radiated Tests  
CE EMC Directive 89/336/EEC  
EN55022:1998+A1:2000+A2:2003; Class B Conducted & Radiated Test  
EN61000-3-2:2000, Class D Harmonic Current Emissions  
EN61000-3-3:1995+A1:2001 Voltage Fluctuations and Flicker  
ISO 7637-1:1990; Road Vehicles - Electrical disturbances from conduction  
and coupling  
Immunity Characteristics  
• EN55024:1998+A1:2001  
• IEC 61000-4-2:2001 Electrostatic Discharge Immunity Test  
• IEC 61000-4-3:2002 Radiated Radio-Frequency Electromagnetic Field  
Immunity Test  
• ICE 61000-4-4:1995+A1:2000+A2:2001 Electrical Fast Transient/Burst  
Immunity Test  
• IEC 61000-4-5:2001 Surge Immunity Test  
• IEC 61000-4-6:2001 Immunity to Conducted Disturbances, Induced by  
Radio-Frequency Fields  
• IEC 61000-4-8:2001 Power Frequency Magnetic Field Immunity Test  
• IEC 61000-4-11:2001 Voltage Dips, Short Interruptions and Voltage  
Variations Immunity Tests  
Safety  
• UL/CSA 60950-1  
• EMARK  
24  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Environmental Specifications  
Temperature  
Operating: -20° to 60° C  
Operating Survival: -25° to 65° C  
Storage: -20° to +70° C  
Humidity  
Operating: 5 to 90% RH, 40° C, non-condensing  
Non-operating: 5 to 93% RH, non-condensing  
Altitude  
Operating: 10,000 ft (IEC 60068 PT2-13, 4 hours)  
Non-operating: 15,000 ft (IEC 60068 PT2-13, 4 hours)  
Vibration  
Operating (random): 10 to 500 Hz, 3.0 G rms acceleration, 3 hours per axis  
Shock  
Operating/Non-operating: 50 G, 11 ms duration, 1/2 sine, 3 shocks per  
axis (IEC 60068 PT2-27)  
Connectors  
• Video Input  
15-pin D-Sub VGA, female, Zhangjiagang SBFR15 or equivalent  
• Power Interrupt  
CviLux CP35 2P*H00 (black); terminal part number 43030-0007  
Mating connector is Molex Micro Fit Jr., Molex part number 43025-0200,  
terminal part number 43030-0007.  
The power interrupt switch is connected to a single pole single throw  
normally open push button (SPST N.O) switch. This can be connected to your  
docking station or computer’s power button.  
• Audio Input  
3mm jack  
• USB Upstream Type B  
Type B for connecting to the computer  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
• DC Power Input  
Chassis-mounted, two-pin connector (Molex Mini Fit Jr., Header 5569 Molex  
part number 39-30-0020)  
The table below lists the connector’s pin assignments  
PIN NUMBER  
1 (Square)  
SIGNAL  
Positive input voltage (12V) Red  
Return (GND) Black  
WIRE  
2 (D-Shape)  
• USB Downstream Type A  
• For connecting peripral USB devices  
Speaker Vent  
USB Type A  
Volume Dial  
Dimming Dial  
USB Type A  
USB Type B Upstream  
VGA  
Audio  
Remote PC Shutdown/Start  
Power 12 V  
26  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Addendum A  
Planar Softkey Use  
The Planar LX1200TI has built in programmable function buttons. This docu-  
ment is to guide the user on the use and installation of the softkey software.  
The Function buttons are mapped out of the box as:  
BUTTON  
INITIAL KEY DEFAULT SOFTKEY  
MAPPING MAPPING  
POSSIBLE KEY  
MAPPING  
E
F18  
F11  
F1  
F2  
F3  
F4  
F5  
Alt+F11  
1
2
3
4
5
F13  
F14  
F15  
F16  
F17  
Launch Program  
Ctnl+Alt+2  
Past Text  
Launch IE7 to an address  
Open a Folder  
The Planar softkey software will allow the user to remap those keys to any  
other single keys, combination of keys, or launch a program from the buttons  
on the front of the LX1200TI monitor.  
Softkey Install Guide  
1. Install the Planar Softkey software from the CD by clicking on the Planar  
Softkey Icon.  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
2. Agree to the software license agreement.  
3. The software will install a link on your desktop, on the bottom right  
Windows notification area, and on the start menu. The software will  
install with a default configuration.  
4. There is a screen keyboard that can be activated by right clicking on  
the Planar Logo in the Windows information tray.  
28  
LX1200TI User’s Guide (020-0512-02A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Support and Service  
Planar is a US company based in Beaverton, Oregon and Espoo, Finland, with  
a world-wide sales distribution network. Full application engineering support  
and service are available to make the integration of Planar displays as simple  
and quick as possible for our customers.  
RMA Procedure: For a Returned Material Authorization number, please contact  
Planar Systems, Inc. with the model number(s) and serial number(s). When  
returning goods for repair, please include a brief description of the problem,  
and mark the outside of the shipping container with the RMA number.  
Planar Systems, Inc.  
Customer Service  
Email: PlanarSupport@planar.com  
Americas Support  
1195 NW Compton Drive  
Beaverton, OR 97006-1992  
Tel: 1-866-PLANAR-1 (752-6271) (US only)  
1-503-748-5799 (outside the US)  
Hours: M-F, 8am - 8pm Eastern Time | 5am - 5pm Pacific Time  
Europe and Asia-Pacific Support  
Olarinluoma 9 PO Box 46  
FIN-02201 Espoo, Finland  
Tel: +358-9-420-01  
Hours: M-F, 7am - 4pm CET  
© 2008 Planar Systems, Inc. 02/08 Planar is a registered trademark of Planar Systems, Inc.  
Other brands and names are the property of their respective owners.  
Technical information in this document is subject to change without notice.  
Document No. 020-0512-02A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Power Supply c1637m User Manual
Philips Answering Machine SS031P User Manual
Philips Marine Instruments BDL3245E User Manual
Philips Portable DVD Player PET708 98 User Manual
Pioneer CD Player CDJ 2000nexus User Manual
PQI Computer Drive U220 User Manual
Professional Series Toaster PS77401 User Manual
ProForm Home Gym PFEL59050 User Manual
ProForm Treadmill 831291610 User Manual
PYLE Audio Car Video System PL72HBTF User Manual