DCS-353
DVD/CD Receiver
Speaker System
XV-DV353
S-DV353
DCS-360
XV-DV360
S-DV360T
S-DV360SW
DVD/CD Receiver
Speaker System
HTZ151DVD
DVD/CD Receiver
Speaker System
XV-DV151
S-DV151
HTZ252DVD
XV-DV252
S-DV1T
S-DV252SW
DVD/CD Receiver
Speaker System
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
This product is a class 1 laser product, but this product
contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: top of the unit
CLASS 1
LASER PRODUCT
D3-4-2-1-8_B_En
POWER-CORD CAUTION
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from
the AC outlet to shut down all power. Therefore,
make sure the unit has been installed so that the
power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard,
the power cord should also be unplugged from the
AC outlet when left unused for a long period of time
(for example, when on vacation).
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement. S002_En
D3-4-2-2-2a_A_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
Operating Environment
Operating environment temperature and humidity:
+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c_A_En
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filed
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
on vacation).
D3-4-2-2-1a_A_En
or moisture.
D3-4-2-1-3_A_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
[For U.K. model]
This product complies with the Low Voltage Directive
(73/23/EEC, amended by 93/68/EEC), EMC Directives
(89/336/EEC, amended by 92/31/EEC and
requires repair will be charged for even during the
warranty period.
K041_En
93/68/EEC).
D3-4-2-1-9a_En
WARNING
To prevent a fire hazard, do not place any naked
flame sources (such as a lighted candle) on the
equipment.
D3-4-2-1-7a_A_En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
01 Controls and displays
05 USB playback
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . 6
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the USB interface . . . . . . . . . . . . . . . . 22
Basic playback controls . . . . . . . . . . . . . . . . 22
Scanning files . . . . . . . . . . . . . . . . . . . . . . . . 23
Playing a JPEG slideshow . . . . . . . . . . . . . . . 23
Browsing files with the Navigator . . . . . . . . . 23
02 Getting started
Home theater sound setup . . . . . . . . . . . . . . . 9
Setting the channel levels . . . . . . . . . . . . . . 9
Using the on-screen displays . . . . . . . . . . . . 10
Playing discs . . . . . . . . . . . . . . . . . . . . . . . . 10
Basic playback controls . . . . . . . . . . . . . . . 11
Resume and Last Memory . . . . . . . . . . . . . 11
DVD-Video disc menus. . . . . . . . . . . . . . . . 11
Video CD/Super VCD PBC menus . . . . . . . 11
Listening to the radio . . . . . . . . . . . . . . . . . . 12
Improving poor FM reception . . . . . . . . . . . 12
Memorizing stations. . . . . . . . . . . . . . . . . . 12
Listening to station presets . . . . . . . . . . . . 12
Listening to other sources . . . . . . . . . . . . . . 13
Setting the sleep timer . . . . . . . . . . . . . . . . . 13
Dimming the display. . . . . . . . . . . . . . . . . . . 13
06 More tuner features: RDS
An introduction to RDS . . . . . . . . . . . . . . . . . 24
Displaying RDS information . . . . . . . . . . . . 24
Searching for RDS programs . . . . . . . . . . . 24
07 Audio Settings and Video Adjust
menus
Audio Settings menu. . . . . . . . . . . . . . . . . . . 25
Audio DRC . . . . . . . . . . . . . . . . . . . . . . . . . 25
Video Adjust menu . . . . . . . . . . . . . . . . . . . . 25
08 Initial Settings menu
Using the Initial Settings menu . . . . . . . . . . . 26
Video Output settings . . . . . . . . . . . . . . . . . . 26
Language settings. . . . . . . . . . . . . . . . . . . . . 27
Display settings. . . . . . . . . . . . . . . . . . . . . . . 28
Options settings . . . . . . . . . . . . . . . . . . . . . . 28
Speakers settings . . . . . . . . . . . . . . . . . . . . . 28
Parental Lock . . . . . . . . . . . . . . . . . . . . . . . 28
About DivX® VOD content . . . . . . . . . . . . . 29
Speaker Distance . . . . . . . . . . . . . . . . . . . . 30
03 Listening to your system
Auto listening mode . . . . . . . . . . . . . . . . . . . 14
Listening in surround sound. . . . . . . . . . . . . 14
Using Front Surround . . . . . . . . . . . . . . . . . . 14
Listening in stereo . . . . . . . . . . . . . . . . . . . . 15
Listening with headphones . . . . . . . . . . . . 15
Using the SFC modes . . . . . . . . . . . . . . . . . . 15
Adjusting the bass and treble . . . . . . . . . . . . 15
Boosting the bass level . . . . . . . . . . . . . . . . . 15
09 Other connections
Connecting external antennas. . . . . . . . . . . . 31
Connecting auxiliary audio components . . . . 31
Connecting the S-video output . . . . . . . . . . . 31
Connecting using the component video
output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
About progressive scan video . . . . . . . . . . . 32
Using the SCART AV output . . . . . . . . . . . . . 32
Recording mode . . . . . . . . . . . . . . . . . . . . . 33
Connecting using HDMI . . . . . . . . . . . . . . . . 33
Switching the HDMI audio setting . . . . . . . 34
Resetting the HDMI connection . . . . . . . . . 34
About HDMI . . . . . . . . . . . . . . . . . . . . . . . . . 34
04 Disc playback features
Scanning discs . . . . . . . . . . . . . . . . . . . . . . . 16
Playing in slow motion . . . . . . . . . . . . . . . . . 16
Frame advance/frame reverse. . . . . . . . . . . . 16
Playing a JPEG slideshow. . . . . . . . . . . . . . . 16
Browsing DVD or Video CD/Super VCD discs
with the Disc Navigator. . . . . . . . . . . . . . . . . 17
Browsing WMA, MP3, MPEG-4 AAC, DivX video
and JPEG files with the Disc Navigator . . . . . 18
Looping a section of a disc . . . . . . . . . . . . . . 18
Using repeat play . . . . . . . . . . . . . . . . . . . . . 18
Using random play . . . . . . . . . . . . . . . . . . . . 19
Creating a program list . . . . . . . . . . . . . . . . . 19
Other functions available from the program
menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Searching a disc. . . . . . . . . . . . . . . . . . . . . . 20
Switching subtitles . . . . . . . . . . . . . . . . . . . . 20
Switching language / audio channels. . . . . . 20
Zooming the screen . . . . . . . . . . . . . . . . . . . 21
Switching camera angles . . . . . . . . . . . . . . . 21
Displaying disc information . . . . . . . . . . . . . 21
10 Additional information
Disc / content format playback
compatibility . . . . . . . . . . . . . . . . . . . . . . . . . 35
Disc compatibility table . . . . . . . . . . . . . . . 35
About DVD+R/DVD+RW compatibility . . . 36
About DivX . . . . . . . . . . . . . . . . . . . . . . . . . 36
About MPEG-4 AAC . . . . . . . . . . . . . . . . . . 37
About WMA . . . . . . . . . . . . . . . . . . . . . . . . 37
Using and taking care of discs . . . . . . . . . . . 37
DVD Video regions . . . . . . . . . . . . . . . . . . . 38
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and maintenance . . . . . . . . . . . . 38
Hints on installation . . . . . . . . . . . . . . . . . . 38
Cleaning the pickup lens . . . . . . . . . . . . . . 38
Problems with condensation . . . . . . . . . . . 38
Moving the system unit. . . . . . . . . . . . . . . . 38
Screen sizes and disc formats. . . . . . . . . . . . 38
TV system setting . . . . . . . . . . . . . . . . . . . . . 39
Frequency step setting . . . . . . . . . . . . . . . . . 39
Switching off the demo . . . . . . . . . . . . . . . . . 39
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 40
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
DVD/CD/Video CD player . . . . . . . . . . . . . . 41
Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
USB connection . . . . . . . . . . . . . . . . . . . . . 42
HDMI connection (U.K. model only) . . . . . . 42
Error Messages. . . . . . . . . . . . . . . . . . . . . . 43
Resetting the system. . . . . . . . . . . . . . . . . . . 43
Setting the Key Lock . . . . . . . . . . . . . . . . . . . 43
Using the language code list. . . . . . . . . . . . . 43
Language code list . . . . . . . . . . . . . . . . . . . . 44
Country/Area code list. . . . . . . . . . . . . . . . . . 44
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 45
For U.K. Model
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.
K058_En
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Controls and displays
CChaoptnert1rols and displays
Front panel
Remote control
STANDBY
/ON
TUNER
OPEN/CLOSE
DVD/CD
USB
VOLUME
STANDBY/ON
DVD/CD
USB
(FM/AM)
1
2
OPEN/
CLOSE
LINE
11
12
AUDIO
SUBTITLE
ANGLE
1
2
3
4
5
6
1
4
2
5
8
0
3
6
3
7
9
ZOOM
CLEAR
DISPLAY
TUNE
TOP MENU
MENU
9
13
14
4
5
ST
ST
ENTER
HOME
MENU
7
8
RETURN
6
7
TUNE
SETUP
TEST TONE SURROUND
SOUND
1
ꢀ OPEN/CLOSE
Opens/closes the disc tray.
8
2
ꢁ DVD/CD
TV CONTROL
SLEEP
Selects the DVD/CD function and starts/
pauses/resumes playback.
15
16
9
INPUT
MUTE
CHANNEL VOLUME
VOLUME
3
ꢂ
10
Stops playback.
4
ꢁ USB
Selects the USB function and starts/pauses
playback.
1
ꢃ STANDBY/ON
5
VOLUME buttons
Switches the system on or into standby.
6
ꢃ STANDBY/ON
2
Function select buttons
Switches the system on or into standby.
Selects the source you want to listen to (DVD/
7
USB interface
CD, TUNER, USB, LINE).
Connect a USB device for playback (see USB
3
Number buttons / CLEAR / DISPLAY
playback on page 22).
CLEAR
8
PHONES jack
Clears an entry.
Connect headphones.
9
Display
See Display below.
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
01
DISPLAY
8
Playback controls
Displays/changes disc information shown
on-screen (page 21) or to display RDS
information (page 24).
See Basic playback controls on page 11, Disc
playback features on page 16 and USB playback
on page 22 for an explanation of these
controls.
4
5
TOP MENU
9
TV CONTROL buttons
Displays the top menu of a DVD disc in the
play position—this may be the same as
pressing MENU (page 11).
These control Pioneer plasma displays.
10 MUTE
Mutes the sound (press again to cancel).
Cursor buttons, ENTER and tuning
buttons
11 ꢀ OPEN/CLOSE
Opens/closes the disc tray.
Cursor buttons
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
12 DVD controls
navigate on-screen displays and menus.
AUDIO
ENTER
Selects audio channel/language (page 20).
Selects an option or executes a command.
SUBTITLE
TUNE +/–
Tunes the radio.
Displays/changes the subtitles (page 20).
ANGLE
ST +/–
Changes camera angle during DVD multi-
angle scene playback (page 21).
Selects station presets when listening to
the radio.
ZOOM
6
7
HOME MENU
Displays (or exits) the on-screen menu for
Initial Settings, Play Mode functions, etc.
Changes the screen zoom level (page 21).
13 MENU
Press to display a DVD disc or USB menu, or
the Navigator (page 17 and 23).
Setup and other sound controls
SETUP
14 RETURN
Returns to a previous menu screen.
Use to make various system and surround
sound settings (page 9, 12, 14, 34 and 39).
15 SLEEP
Press to set the sleep timer (page 13).
TEST TONE
Outputs the test tone (for speaker setup)
(page 9).
16 VOLUME +/–
Adjusts the volume.
SURROUND
Selects a Surround mode (page 14) or
switches to stereo playback (page 15).
SOUND
Accesses the sound menu to adjust the
SFC Mode, bass and treble, etc. (page 15
and 33)
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Controls and displays
Display
1
2
3
4
5
6 7
PRGSVE SOUND
DTS F.SURR.
REC MODE
RPT -1
kHz PGM
MHz RDM
2D
2PL
15 14 13 12
11
10 9
8
1
DTS
9
RDM
Lights during playback of a DTS source
(page 14).
Lights during random play (page 19).
10 kHz / MHz
2
PRGSVE (Australian model only)
Indicates the frequency unit shown in the
character display (kHz for AM, MHz for FM).
Lights when progressive scan video output is
selected (page 32).
11 Character display
3
SOUND
12
Lights when the SFC Modes or the tone
controls (treble, bass or bass boost) are active
(page 15).
Lights when sleep timer is active (page 13).
13
ꢀ
Lights during playback.
4
F.SURR. (XV-DV353/151 model only)
Lights when the Front Surround listening
mode is selected (page 14).
14 2PL II
Lights during Dolby Pro Logic II decoding
(page 14).
5
RPT and RPT-1
RPT lights during repeat play. RPT-1 lights
during repeat one-track play (page 18).
15
2
D
Lights during playback of a Dolby Digital
source (page 14).
6
REC MODE (U.K. model only)
Lights when Rec Mode is on (page 33).
7
PGM
Lights during program play (page 19).
8
Tuner indicators
– Lights when a broadcast is being
received.
– Lights when a stereo FM broadcast is
being received in auto stereo mode.
– Lights when FM mono reception is
selected.
(U.K. model only) – Lights when in one
of the RDS display or search modes.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
02
Chapter 2
Getting started
XV-DV151 model speaker setup:
Home theater sound setup
Center
Front
Front
right
Place your speakers as shown below for
optimal surround sound (see the Speaker
Setup Guide for more placement tips).
left
Subwoofer
Surround
right
Surround
left
• Standard surround 5-spot setup – This is
a standard multichannel surround sound
speaker setup for optimal 5.1 channel
home theater sound.
Listening position
After placing your speakers, complete Setting
the channel levels below then refer to Speakers
settings on page 28 to complete your surround
sound setup.
Center
Front left
Front right
Subwoofer
Listening position
Setting the channel levels
Surround
left
Surround
right
Set the relative channel levels from your main
2
listening position.
XV-DV353/151 only: Depending on the size and
1
Press TEST TONE.
characteristics of your room, you can choose
The test tone is output in the following order
(from the speakers active in the current
listening mode):
1
to use the following setup option:
• Front surround 3-spot setup – This setup
is ideal when rear surround speaker
placement isn't possible or you want to
avoid running long speaker cables in your
listening area. Use this setup together with
the Front Surround modes to take
advantage of wall and ceiling reflections
for a very realistic surround effect.
XV-DV353 model speaker setup:
• L – Front left speaker
• C – Center speaker
• R – Front right speaker
• SR – Right surround speaker
• SL – Left surround speaker
3
• SW – Subwoofer
2
Use the VOLUME +/– button to adjust
Front left Center Front right
the volume to an appropriate level.
Subwoofer
Surround
left
Surround
right
Listening position
Note
1 When using this setup, make sure the front surround mode is switched on (page 14) before selecting any surround mode.
2 • This is only available when DVD/CD is selected and playback is stopped. Also make sure headphones are unplugged.
• To adjust the overall balance while listening to any sound source you want, press SETUP, use ꢀ/ꢁ to select CH LEVEL then
press ENTER. Use ꢀ/ꢁ to move channel to channel, and ꢂ/ꢃ to adjust the channel levels. Press ENTER when you’re finished.
3 Since the subwoofer produces ultra-low frequencies its sound may seem quieter than it actually is.
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Getting started
3
Use ꢂ/ꢃ to adjust the speaker levels in
turn.
Playing discs
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is 10 dB.
The basic playback controls for playing DVD,
CD, Video CD/Super VCD, DivX video and
WMA/MP3/MPEG-4 AAC discs are covered
here. Further functions are detailed in chapter 4.
4
When you’re done, press ENTER to exit
1
If the player isn’t already on, switch it on.
test tone setup.
If you’re playing a disc with video, also turn on
your TV and make sure that it is set to the
correct video input.
Using the on-screen displays
2
Press ꢀ OPEN/CLOSE to load a disc.
For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you’re
loading a double-sided DVD disc, load it with
the side you want to play face down).
All the screens are navigated in basically the
same way, using ꢂ, ꢃ, ꢀ, ꢁ to change the
highlighted item and pressing ENTER to select
1
it.
Important
• Throughout this manual, ‘Select’ means
use the cursor buttons to highlight an item
on-screen, then press ENTER.
3
Press
ꢄ
(play) to start playback.
If you’re playing a DVD or Video CD/Super VCD,
a menu may appear. See DVD-Video disc
menus and Video CD/Super VCD PBC menus on
page 11 to navigate these.
Button
What it does
Displays/exits the on-screen display
HOME
MENU
If you loaded a disc containing JPEGs, a
slideshow will start. See Playing a JPEG
slideshow on page 16 for more on this.
ꢀꢂꢃꢁ Changes the highlighted menu item
Selects the highlighted menu item
ENTER
Returns to the main menu without
saving changes
• If a disc contains a mixture of DivX video
and other media file types (MP3, for
example), first select whether to play the
DivX video files (DivX) or the other media
file types (MP3 / WMA / JPEG / MPEG-4
AAC) from the on-screen display.
RETURN
Tip
• The button guide at the bottom of every
OSD screen shows you which buttons
you’ll need to use for that screen.
4
Adjust the volume.
Use the VOLUME control.
Note
1 The screen saver will appear after five minutes of inactivity.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
02
If you want to clear the resume point, press ꢂ
(stop) while RESUME is displayed.
Basic playback controls
The following table shows the basic controls on
1
the remote for playing discs . You can find
DVD-Video disc menus
Many DVD-Video discs contain menus from
which you can select what you want to watch.
other playback features in the chapter 4.
Button What it does
Sometimes DVD-Video menus are displayed
automatically when you start playback; others
only appear when you press MENU or TOP
MENU.
ꢄ
Starts/resumes normal playback.
• If the display shows RESUME or
LAST MEM playback starts from the
resume or last memory point (see
Resume and Last Memory below).
Button
What it does
ꢅ
ꢂ
Pauses/unpauses a disc.
Displays the ‘top menu’ of a DVD
disc—this varies with the disc.
TOP MENU
Stops playback or cancels the resume
function (if the display shows RESUME).
Displays a DVD disc menu—this
varies with the disc and may be
the same as the ‘top menu’.
MENU
ꢆ
ꢇ
ꢈ
Press to start fast reverse scanning.
Press to start fast forward scanning.
ꢀꢂꢃꢁ
Moves the cursor around the
screen.
Skips to the start of the current track or
chapter, then previous tracks/chapters.
Selects the current menu option.
ꢉ
Skips to the next track or chapter.
ENTER
Numbers Use to enter a title/chapter/track
number. Press ENTER to select.
Returns to the previously
displayed menu screen.
RETURN
• If the disc is stopped, playback starts
from the selected title (for DVD) or
track (for CD/Video CD/Super VCD).
• If the disc is playing, playback jumps
to the start of the selected title (VR
mode DVD-RW), chapter (DVD-Video)
or track (CD/Video CD/Super VCD).
Numbers
Highlights a numbered menu
option (some discs only). Press
ENTER to select.
Video CD/Super VCD PBC menus
Some Video CD/Super VCDs have menus from
which you can choose what you want to watch.
These are PBC (Playback control) menus.
Resume and Last Memory
You can play a PBC Video CD/Super VCD
without having to navigate the PBC menu by
starting playback using a number button to
select a track, rather than the ꢄ (play) button.
When you stop playback of a disc, RESUME
shows in the display indicating that you can
resume playback from that point.
With DVDs and Video CD/Super VCDs, even if
2
ejected, the play position is stored in memory.
The next time you load the disc, the display
shows LAST MEM and you can resume play-
back.
Button
What it does
Displays the PBC menu.
RETURN
Numbers
Selects numbered menu options.
Press ENTER to select.
Note
1 You may find with some DVD discs that some playback controls don’t work in certain parts of the disc.
2 • The Last Memory function may not work with some discs.
• For DVD-Video discs (except VR mode DVD-R/RW), the player stores the play position of the last five discs.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Getting started
3
Use ꢂ/ꢃ to select FM MONO then press
Button
What it does
ENTER
.
ꢈ
Displays the previous menu page
(if there is one).
The mono indicator ( ) lights when the tuner
is in mono reception mode.
ꢉ
Displays the next menu page (if
there is one).
Select FM AUTO above to switch back to auto-
stereo mode (the stereo indicator ( ) lights
when receiving a stereo broadcast).
Listening to the radio
Memorizing stations
The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don’t have to manually
tune in every time you want to listen.
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
• U.K. model only – See also More tuner
features: RDS on page 24.
1
Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
1
Press TUNER to switch to the tuner, then
press repeatedly to select the AM or FM band.
The display shows the band and frequency.
2
Press SETUP and use ꢀ/ꢁ to choose
2
Tune to a frequency.
‘ST.MEM.’ then press ENTER
.
There are three tuning modes—manual, auto,
and high-speed:
3
Use ꢂ/ꢃ to select the station preset you
want then press ENTER
.
• Manual tuning: Press TUNE +/–
repeatedly to change the displayed
frequency.
Listening to station presets
1
Make sure the TUNER function is selected.
• Auto tuning: Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to keep searching.
2
Use the ST +/– buttons to select a station
preset.
• You can also use the number buttons to do
• High-speed tuning: Press and hold TUNE
+/– until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
this.
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1
Tune to an FM radio station then press
SETUP
.
2
Use ꢀ/ꢁ to choose FM MODE then press
ENTER
.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
02
Listening to other sources
Dimming the display
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
audio components on page 31 for more on this.
You can dim the display if you find it too bright.
1
Press SETUP and use ꢀ/ꢁ to choose
DIMMER then press ENTER
This is shown in the front panel display.
.
• To connect a USB device to the USB
terminal, see USB playback on page 22.
2
Use ꢂ/ꢃ to select LIGHT or DARK then
press ENTER
.
STANDBY
/ON
TUNER
DVD/CD
USB
(FM/AM)
OPEN/
CLOSE
LINE
AUDIO
1
Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Press LINE to select the source.
U.K. model only – Each press switches
between LINE1 and LINE2.
3
If necessary, start playback of the source.
Setting the sleep timer
The sleep timer switches off the system after
about an hour so you can fall asleep without
1
worrying about it.
•
Press SLEEP repeatedly to select an option
then press ENTER
.
Choose between the following options:
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON, you can press SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
S L P - - - - -
Note
1 The display dims when the sleep timer is set.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Listening to your system
Chapter 3
Listening to your system
• MUSIC (Dolby Pro Logic II Music) – Pro
Logic II 5.1 channel surround sound,
especially suited to music sources (use
with any two-channel source)
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
• STEREO – See Listening in stereo below
TUNE
SETUP
TEST TONE SURROUND
SOUND
Using Front Surround
XV-DV353/151 only
The Front Surround mode is effective when
DVD/CD or USB is selected as the input source
and you are using the Front surround 3-spot
speaker setup as described in Home theater
sound setup on page 9 and the Speaker Setup
Guide.
•
Press SURROUND to select the AUTO
1
listening mode.
Listening in surround sound
You can listen to stereo or multichannel
2
• XV-DV353 only – The surround speakers
should be placed beside the front speakers
and oriented towards the walls.
sources in surround sound. Surround sound
is generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
TUNE
• XV-DV151 only – The surround speakers
should be placed on top of the front
SETUP
TEST TONE SURROUND
SOUND
speakers and oriented towards the walls.
•
Press SURROUND repeatedly to select a
TUNE
TOP MENU
MENU
1
listening mode.
The choices that appear in the display will vary
ST
ST
ENTER
HOME
MENU
RETURN
according to the type of source that’s playing.
TUNE
SETUP
TEST TONE SURROUND
SOUND
• AUTO – Auto listening mode (see above)
• DOLBY PL (Dolby Pro Logic) – 4.1 channel
surround sound (use with any two-channel
source)
1
Press SETUP and use ꢀ/ꢁ to choose
‘F.SURR’ then press ENTER 3
.
• MOVIE (Dolby Pro Logic II Movie) – Pro
Logic II 5.1 channel surround sound,
especially suited to movie sources (use
with any two-channel source)
2
Use ꢂ/ꢃ to select MODE ON or MODE
OFF then press ENTER 4
.
After selecting MODE ON, you can use the
surround listening modes with Front Surround.
Note
1 If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.
2 • Note that the input source must be switched to DVD/CD or USB for multichannel playback.
• If you’re planning on recording a multichannel source, refer to Recording mode on page 33.
3 Note that the F.SURR option does not appear when headphones are connected or if the Recording Mode is switched on.
4 When set to MODE ON, make sure to follow the Setup Guide for best surround sound.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to your system
Listening in stereo
03
Adjusting the bass and treble
You can listen to any source—stereo or
multichannel—in stereo. When playing a
multichannel source, all channels are
downmixed to the front left/right speakers and
Use the bass and treble controls to adjust the
overall tone.
1
Press SOUND
.
the subwoofer.
2
Use ꢀ/ꢁ to select BASS or TREBLE then
TUNE
press ENTER
Use ꢂ/ꢃ to adjust the sound then press
ENTER to confirm
.
SETUP
TEST TONE SURROUND
SOUND
3
.
•
Press SURROUND repeatedly until
STEREO shows in the display.
Boosting the bass level
Listening with headphones
When headphones are connected, only the
STEREO mode is available.
There are two bass modes you can use to
enhance the bass in a source.
1
Press SOUND
.
2
Use ꢀ/ꢁto select BASSMODE then press
Using the SFC modes
ENTER
.
The SFC (Sound Field Control) modes can be
used with any multichannel or stereo source
for a variety of additional surround sound
effects.
3
Use ꢂ/ꢃ to adjust the sound then press
ENTER to confirm
Select between OFF, MUSIC or CINEMA.
.
TUNE
TOP MENU
MENU
ST
ST
ENTER
HOME
MENU
RETURN
TUNE
SETUP
TEST TONE SURROUND
SOUND
1
2
Press SOUND
.
Use ꢀ/ꢁ to select SFC MODE then press
ENTER
.
3
Press ꢂ/ꢃ then ENTER to select an SFC
Sound Mode.
Select between OFF, ACTION, DRAMA,
ROCK, POP, HALL or LIVE.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Disc playback features
Chapter 4
Disc playback features
1
During playback, press
ꢅ
(pause).
Important
2
Press and hold ꢊ/ꢋ or ꢌ/ꢍ until slow
• Many of the functions covered in this
chapter apply to DVD discs, Video CDs/
Super VCDs, CDs, DivX video and WMA/
MP3/MPEG-4 AAC/JPEG discs, although
the exact operation of some varies slightly
with the kind of disc loaded.
motion playback starts.
Press repeatedly to change the slow motion
speed (shown on-screen).
2
• To resume playback, press ꢄ (play).
• Some DVDs restrict the use of some
functions (random or repeat, for example)
in some or all parts of the disc. This is not a
malfunction.
Frame advance/frame reverse
You can advance or back up DVD discs frame-
by-frame. With Video CD/Super VCDs and DivX
video you can only use frame advance.
• When playing Video CD/Super VCDs, some
of the functions are not available during
PBC playback. If you want to use them,
start the disc playing using a number
button to select a track.
1
During playback, press
ꢅ
(pause).
2
Press ꢊ/ꢋ or ꢌ/ꢍ to reverse or
advance a frame at a time.
2
• To resume playback, press ꢄ (play).
Scanning discs
Playing a JPEG slideshow
You can fast-scan discs forward or backward at
After loading a disc containing JPEG pictures,
1
various different speeds.
press ꢄ to start a slideshow from the first
3
•
During playback, press
ꢆ
or
ꢇ
to start
folder/picture on the disc. The player displays
scanning.
the pictures in each folder in alphabetical
order.
Press repeatedly to increase the scanning
speed (shown on-screen).
• If the disc contains WMA/MP3/MPEG-4
AAC files, playback starts with the first file
and the slideshow repeats until all the
audio files on the disc have played back.
2
• To resume playback, press ꢄ (play).
Playing in slow motion
Pictures are automatically adjusted so that
they fill as much of the screen as possible.
You can play DVDs, Video CD/Super VCDs and
DivX video at four different forward slow
motion speeds. DVD discs can also be played
in reverse slow motion.
Note
1 Only one speed is available for DivX video discs.
2 • Depending on the disc, normal playback may automatically resume when a new chapter is reached on a DVD disc.
• With Video CD/Super VCDs in PBC mode or a WMA/MP3/MPEG-4 AAC track, playback automatically resumes at the end or
beginning of the track.
3 • The time it takes for the player to load a file increases with large file sizes.
• Discs can contain up to 299 folders and up to 648 folders and files combined.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc playback features
04
While the slideshow is running:
The options available depend on the kind of
disc loaded and whether the disc is playing or
not, but include:
Button
What it does
ꢅ
Pauses the slideshow (or audio);
press again to restart.
• Title – Titles from a DVD-Video disc.
• Chapter – Chapters from the current title
of a DVD-Video disc.
ꢈ
Jumps to the previous picture (or
audio file with audio playback).
• Track – Tracks from a Video CD/Super VCD
disc.
ꢉ
Jumps to the next picture (or
audio file with audio playback).
• Time – Thumbnails from a Video CD/Super
VCD disc at 10 minute intervals.
Pauses the slideshow and
rotates/flips the displayed
picture (press ꢄ (play) to restart
slideshow).
ꢀ/ꢁ/ꢂ/ꢃ
• Original: Title – Original titles from a VR
mode DVD-RW disc.
• Playlist: Title – Playlist titles from a VR
mode DVD-RW disc.
ZOOM
MENU
Pauses the slideshow and zooms
the picture. Press again to toggle
between 1x, 2x and 4x zoom
(press ꢄ (play) to restart
slideshow).
• Original: Time – Thumbnails from the
Original content at 10 minute intervals.
• Playlist: Time – Thumbnails from the
Playlist at 10 minute intervals.
The screen shows up to six moving thumbnail
images displayed one after another. To display
the previous/next six thumbnails, press ꢈ/
ꢉ.
Displays the Disc Navigator
screen (see below).
3
Select the thumbnail image for what
Browsing DVD or Video CD/
Super VCD discs with the Disc
Navigator
you want to play.
01
02
05
03
06
Use the Disc Navigator to browse through the
contents of a DVD or Video CD/Super VCD disc
to find the part you want to play.
04
Disc Navigator: Title
01- 49: --
1
During playback, press HOME MENU
and select ‘Disc Navigator’ from the on-
screen menu.
You can use either ꢂ/ꢃ/ꢀ/ꢁ and ENTER to
select a thumbnail, or the number buttons.
Disc Navigator
To select using the number buttons, enter a
two-digit number then press ENTER.
2
Select a view option.
Disc Navigator
Title
Chapter
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Disc playback features
Tip
Browsing WMA, MP3, MPEG-4
AAC, DivX video and JPEG files
with the Disc Navigator
• You can also play a JPEG slideshow while
listening to WMA/MP3/MPEG-4 AAC
playback. Simply select the audio file you
want to listen to followed by the JPEG from
which you want the slideshow to start. The
slideshow repeats until all the audio files
up to the end of the folder finish playback.
Use the Disc Navigator to find a particular file
or folder by filename.
1
Press HOME MENU and select ‘Disc
Navigator’ from the on-screen menu.
• To play the contents of the whole disc
rather than just the current folder, exit the
Disc Navigator and start playback using
the ꢄ (play) button.
00:00/ 00:00
0kbps
Folder1
Folder2
Folder3
Folder4
Looping a section of a disc
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD, Video
CD/Super Video CD) or title (DVD) that form a
loop which is played over and over.
2
Use ꢂ/ꢃ/ꢀ/ꢁ and ENTER to navigate.
Use ꢂ/ꢃ to move up and down the folder/file
list.
1
1
During playback, press HOME MENU and
Use ꢀ to return to the parent folder.
select ‘Play Mode’.
Use ENTER or ꢁ to open a highlighted folder.
• When a JPEG file is highlighted, a
Play Mode
thumbnail image is displayed on the right.
2
3
Select ‘A-B Repeat’.
Press ENTER on ‘A(Start Point)’ to set the
00:00/ 00:00
Folder2
0kbps
loop start point.
File1
File2
File3
File4
File5
4
Press ENTER on ‘B(End Point)’ to set the
loop end point.
After pressing ENTER, playback jumps back to
the start point and plays the loop.
3
To play the highlighted track or DivX
5
To resume normal playback, select ‘Off’.
video file or display the highlighted JPEG
file, press ENTER.
• When a WMA/MP3/MPEG-4 AAC or DivX
video file is selected, playback begins from
that file, and continues until the end of the
folder.
Using repeat play
In addition to various repeat play options, it’s
also possible to use repeat play together with
program play (see Creating a program list on
page 19).
• When a JPEG file is selected, a slideshow
begins, starting with that file, and
continues to the end of the folder.
Note
1 You can also do this by going to the ‘..’ folder at the top, then pressing ENTER.
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc playback features
04
1
During playback, press HOME MENU and
Button
What it does
select ‘Play Mode’.
ꢈ
Returns to the beginning of the
current track/title/chapter;
further presses select another
random track/title/chapter.
2
Select ‘Repeat’ then select a repeat play
1
option.
If program play is active, select Program
Repeat to repeat the program list, or Repeat
Off to cancel.
• Random play remains in effect until you
select Random Off from the random play
menu options.
• For DVD discs, select Title Repeat or
Chapter Repeat.
• For CDs and Video CD/Super VCDs, select
Disc Repeat or Track Repeat.
Creating a program list
This feature lets you program the play order of
• For DivX video discs, select Repeat Title
(or Repeat Off).
3
titles/chapters/tracks on a disc.
1
During playback, press HOME MENU and
select ‘Play Mode’.
Using random play
Use this function to play titles or chapters
2
Select ‘Program’ then select ‘Create/Edit’
(DVD-Video) or tracks (CD and Video CD/Super
from the list of program options.
2
VCD) in a random order.
3
Use ꢂ/ꢃ/ꢀ/ꢁ and ENTER to select a
1
During playback, press HOME MENU and
title, chapter or track for the current step in
the program list.
select ‘Play Mode’.
For a DVD disc, you can add a title or a chapter.
2
Select ‘Random’ then select an option.
• For DVD discs, select Random Title or
Random Chapter.
• For a CD or Video CD/Super VCD, select a
track to add to the program list.
After pressing ENTER to select the title/
chapter/track, the step number automatically
moves down one.
• For CDs and Video CD/Super VCDs, select
On or Off to switch random play on or off.
4
Repeat step 3 to build up a program list.
Tip
A program list can contain up to 24 steps.
• Use the following controls during random
play:
• You can insert steps by just highlighting
the position where you want the new step
to appear and entering a title/chapter/track
number.
Button
What it does
ꢉ
Selects a new track/title/chapter
at random.
• To delete a step, highlight it and press
CLEAR.
Note
1 You can’t use repeat play with WMA/MP3/MPEG-4 AAC discs.
2 • You can set the random play option when a disc is playing or stopped. However, you can't use random play together with
program play.
• You can’t use random play with VR format DVD-R/RW discs, WMA/MP3/MPEG-4 AAC discs, DivX video discs, or while a DVD
disc menu is being displayed.
3 You can’t use Program play with VR format DVD-R/RW discs, WMA/MP3/MPEG-4 AAC discs, DivX video discs, or while a DVD
disc menu is being displayed.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Disc playback features
5
To play the program list, press
ꢄ
(play).
3
4
Select a search mode.
• The disc must be playing in order to use
time search.
Program play remains active until you turn off
program play (see below), erase the program
list (see below), eject the disc or switch off.
Use the number buttons to enter a title,
chapter or track number, or a time.
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD/ DivX video) or track (CD/
Video CD/Super VCD) you want playback to
resume from. For example, press 4, 5, 0, 0
to have playback start from 45 minutes into
the disc. For 1 hour, 20 minutes and 30
seconds, press 8, 0, 3, 0.
Tip
• Use the following controls during program
play:
Button
What it does
HOME
MENU
Save the program list and exit
without starting playback.
ꢉ
Skip to the next step in the
program list.
5
Press ENTER to start playback.
Switching subtitles
Other functions available from the
program menu
There are a number of other options in the
program menu in addition to Create/Edit.
Some DVD discs and DivX video discs have
subtitles in one or more languages; the disc
box will usually tell you which subtitle
languages are available. You can switch
• Playback Start – Starts playback of a
saved program list
1
subtitle language during playback.
•
Press SUBTITLE repeatedly to select a
• Playback Stop – Turns off program play,
but does not erase the program list
subtitle option.
• To set subtitle preferences, see Language
settings on page 27.
• Program Delete – Erases the program list
and turns off program play
• See Displaying DivX subtitle files on
page 36 for more on DivX subtitles.
Searching a disc
You can search DVD discs by title or chapter
number, or by time; CDs and Video CD/Super
VCDs by track number or time; DivX video discs
by time.
Switching language / audio
channels
When playing discs recorded with dialog in two
2
or more languages, or with dual-mono audio
1
Press HOME MENU and select ‘Play
3
Mode’.
you can switch these during playback.
2
Select ‘Search Mode’.
•
Press AUDIO repeatedly to select an
The search options that appear depend on the
kind of disc loaded.
audio language option.
• To set audio language preferences, see
Language settings on page 27.
Note
1 Some discs only allow you to change subtitle language from the disc menu. Press TOP MENU or MENU to access.
2 Some Super VCDs have two soundtracks. With these discs you can switch between the two soundtracks as well as individual
channels in each.
3 Some discs only allow you to change audio language from the disc menu. Press TOP MENU or MENU to access.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc playback features
Zooming the screen
04
Using the zoom feature you can magnify a part
of the screen by a factor of 2 or 4, while
watching a DVD, DivX video title or Video CD/
Super VCD or playing a JPEG disc.
1
During playback, use theZOOM button to
select the zoom factor (Normal, 2x or 4x).
2
Use ꢂ/ꢃ/ꢀ/ꢁ to change the zoomed
area.
You can change the zoom factor and the
1
zoomed area freely during playback.
Switching camera angles
Some DVD discs feature scenes shot from two
or more angles—check the disc box for details.
When a multi-angle scene is playing, a
icon appears on screen (this can be switched
off if you prefer—see Display settings on
page 28).
•
During playback (or when paused), press
ANGLE to switch angle.
Displaying disc information
Various track, chapter and title information
can be displayed on-screen during playback.
•
To show/switch/hide the information
displayed, press DISPLAY repeatedly.
Limited disc information also appears in the
front panel display. Press DISPLAY to change
the displayed information.
Note
1 • Since DVD, Video CD/Super VCD, DivX video title and JPEG pictures have a fixed resolution, picture quality will deteriorate,
especially at 4x zoom. This is not a malfunction.
• If the navigation square at the top of the screen disappears, press ZOOM again to display it.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
USB playback
Chapter 5
USB playback
Important
Using the USB interface
It is possible to listen to two-channel audio
If a USB ERR message lights in the display, it
may mean that the power requirements of the
USB device are too high for this player, or that
the device is incompatible. Try the following:
1
and watch JPEG files using the USB interface
on the front of this unit. Connect a USB mass
2
storage device as shown below.
• Switch the player off, then on again.
1
With the player switched on, press USB.
• Reconnecting the USB device with the
player switched off.
Make sure your TV is on and set to the correct
video input.
• Selecting to another input source (like
DVD/CD), then back to USB.
2
Connect your USB device.
The USB terminal is located on the front panel.
• Using a dedicated AC adapter (supplied
with the device) for USB power.
If this doesn’t remedy the problem, it is likely
your USB device is incompatible.
USB
Type A
Basic playback controls
The following table shows the basic controls on
the remote for USB playback.
Button What it does
USB mass
storage device
ꢄ
Starts normal playback.
ꢅ
Pauses/unpauses playback.
Stops playback.
ꢂ
3
Press
ꢄ
(play) to start playback.
ꢆ
ꢇ
ꢈ
Press to start fast reverse scanning.
Press to start fast forward scanning.
If your USB device contains JPEGs, a
slideshow will start. See Playing a JPEG
slideshow on page 23 for more on this.
Skips to the start of the current file,
then previous files.
• Make sure USB DATA is showing in the
front panel display (or the system is in
standby) when disconnecting.
ꢉ
Skips to the next file.
Note
1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback). It is not pos-
sible to play DivX files through the USB terminal.
2 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital
audio players (MP3 players) of format FAT16/32. It is not possible to connect this unit to a personal computer for USB playback.
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no
responsibility for any loss of data that may occur when connected to this unit.
• With large amounts of data, it may take longer for the system to read the contents of a USB device.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
USB playback
Scanning files
05
Button
MENU
What it does
Displays the Navigator screen
(see below).
You can fast-scan forward or backward at
various different speeds.
•
During playback, press
ꢆ
or
ꢇ
to start
Browsing files with the
scanning.
Press repeatedly to increase the scanning
speed (shown on-screen).
Navigator
Use the Navigator to find WMA, MP3, MPEG-4
3
1
AAC and JPEG files or folders by name.
• To resume playback, press ꢄ (play).
1
Press MENU.
Playing a JPEG slideshow
2
Use ꢂ/ꢃ/ꢀ/ꢁ and ENTER to navigate.
Press ꢄ to start a slideshow from the first
Use ꢂ/ꢃ to move up/down the folder/file list.
2
4
folder/picture. The pictures in each folder are
Use ꢀ to return to the parent folder.
Use ENTER or ꢁ to open a highlighted folder.
displayed in order.
• If the device contains WMA/MP3/MPEG-4
AAC files, playback starts with the first file
and the slideshow repeats until all the
audio files on the device have played back.
• When a JPEG file is highlighted, a
thumbnail image is displayed on the right.
3
To play the highlighted track or display
the highlighted JPEG file, press ENTER.
• When a WMA/MP3/MPEG-4 AAC file is
selected, playback begins from that file,
and continues until the end of the folder.
Pictures are automatically adjusted so that
they fill as much of the screen as possible.
While the slideshow is running:
Button
What it does
• When a JPEG file is selected, a slideshow
begins, starting with that file, and
continues to the end of the folder.
ꢅ
Pauses the slideshow (or audio);
press again to restart.
ꢈ
Jumps to the previous picture (or
audio file with audio playback).
Tip
ꢉ
Jumps to the next picture (or
audio file with audio playback).
• You can also play a JPEG slideshow while
listening to WMA/MP3/MPEG-4 AAC
playback. Simply select the audio file you
want to listen to followed by the JPEG from
which you want the slideshow to start. The
slideshow repeats until all the audio files
up to the end of the folder finish playback.
Pauses the slideshow and
rotates/flips the current picture.
(Press ꢄ to restart slideshow).
ꢀ/ꢁ/ꢂ/ꢃ
ZOOM
Pauses the slideshow and zooms
the picture. Press again to toggle
between 1x, 2x and 4x zoom.
(Press ꢄ to restart slideshow).
• To play all of the contents, rather than just
the current folder, exit the Navigator and
start playback using the ꢄ (play) button.
Note
1 With WMA/MP3/MPEG-4 AAC tracks, playback automatically resumes at the end or beginning of the track.
2 • The time it takes for the player to load a file increases with large file sizes.
• USB devices can contain up to 299 folders and up to 648 folders and files combined.
3 Filenames may be displayed incorrectly with some digital audio players.
4 You can also do this by going to the ‘..’ folder at the top, then pressing ENTER.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
More tuner features: RDS
Chapter 6
More tuner features: RDS
U.K. model only
Displaying RDS information
An introduction to RDS
Use the DISPLAY button to display the
2
Radio Data System (RDS) is a system used by
most FM radio stations to provide listeners with
various kinds of information—the name of the
station and the kind of show they’re
different types of RDS information available.
•
Press DISPLAY for RDS information.
Each press changes the display as follows:
broadcasting, for example.
• Radio Text (RT) – Messages sent by the
radio station. For example, a talk radio
station may provide a phone number as RT.
One feature of RDS is that you can search by
type of program. For example, you can search
for a station that’s broadcasting a show with
the program type, JAZZ.
• Program Service Name (PS) – The name of
the radio station.
1
• Program Type (PTY) – This indicates the
kind of program currently being broadcast.
You can search the following program types:
NEWS – News
FINANCE – Stock market
AFFAIRS – Current Affairs reports, commerce,
INFO – General Information trading, etc.
• SEARCH – PTY search (see below)
• Current tuner frequency
SPORT – Sport
EDUCATE – Educational
CHILDREN – Programs for
children
DRAMA – Radio plays, etc. SOCIAL – Social affairs
Searching for RDS programs
CULTURE – National or
regional culture, theater,
etc.
SCIENCE – Science and
technology
RELIGION – Programs
concerning religion
PHONE IN – Public
expressing their views by
phone
You can search for a program type listed above.
3
1
2
Press the TUNER button for the FM band.
Press DISPLAY repeatedly until SEARCH
VARIED – Usually talk-
based material, such as
TRAVEL – Holiday-type
travel rather than traffic
appears in the display.
quiz shows or interviews. announcements
3
Use ꢀ/ꢁ to select the program type you
POP M – Pop music
ROCK M – Rock music
EASY M – Easy listening
LEISURE – Leisure
interests and hobbies
JAZZ – Jazz
want to hear.
4
Press ENTER to start the search.
LIGHT M – ‘Light’ classical COUNTRY – Country music
The system searches the station presets for a
music
NATION M – Popular
music in a language other
than English
OLDIES – Popular music
from the ’50s and ’60s
FOLK M – Folk music
DOCUMENT – Documentary
match. If it finds one, searching stops for 5 sec.
CLASSICS – ‘Serious’
classical music
OTHER M – Music not
fitting above categories
WEATHER – Weather
reports
5
If you want to keep listening to the
station, press ENTER within the 5 seconds.
If you don’t press ENTER, searching resumes.
Note
1 In addition, there are three other program types, TEST, ALARM, and NONE. ALARM and TEST are used for emergency an-
nouncements. You can’t search for these, but the tuner will switch automatically to this RDS broadcast signal. NONE appears
when a program type cannot be found.
2 • If any noise is picked up while displaying the RT scroll, some characters may be displayed incorrectly.
• If you see NO RADIO TEXT DATA in the RT display, it means no RT data is sent from the broadcast station. The display will
automatically switch to the PS data display (if no PS data, the frequency is displayed).
• In the PTY display, NO DATA or NONE may be shown. In this case, the PS display is shown after a few seconds.
3 RDS is only possible in the FM band.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Settings and Video Adjust menus
07
Chapter 7
Audio Settings and Video
Adjust menus
1
Press HOME MENU and select ‘Video
Adjust’ from the on-screen display.
Audio Settings menu
The Audio Settings menu offers features for
adjusting the way discs sound.
Video Adjust
1
Press HOME MENU and select ‘Audio
2
Make settings using ꢂ/ꢃ/ꢀ/ꢁ and
Settings’ from the on-screen display.
ENTER
.
Audio Settings
Video Adjust
Sharpness
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
Standard
Brightness
Contrast
Gamma
0
0
2
ꢁ
Select and change settings usingꢂ/ꢃ/ꢀ/
and ENTER
Off
0
Hue
.
Chroma Level
0
Audio Settings
Audio DRC
High
Medium
Low
You can adjust the following settings:
Off
• Sharpness – Adjusts the sharpness of
edges in the picture (Fine, Standard, Soft)
• Brightness – Adjusts the overall
brightness (–20 to +20)
Audio DRC
• Settings: High, Medium, Low, Off
• Contrast – Adjusts the contrast between
light and dark (–16 to +16)
(default)
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to on can help by bringing up the
quieter sounds, while controlling loud peaks.
• Gamma – Adjusts the ‘warmth’ of the
picture (High, Medium, Low, Off)
• Hue – Adjusts the red/green balance
(Green 9 to Red 9)
• Chroma Level – Adjusts how saturated
colors appear (–9 to +9)
How much of a difference you hear depends on
the material you’re listening to. If the material
doesn’t have wide variations in volume, you
Adjust the Brightness, Contrast, Hue and
Chroma Level settings using ꢀ/ꢁ.
1
may not notice much change.
Brightness
min
max
0
3
Press ENTER to return to the Video Adjust
Video Adjust menu
screen, or HOME MENU to exit.
From the Video Adjust screen you can adjust
settings that affect picture presentation.
Note
1 Audio DRC is only effective with Dolby Digital audio sources.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Initial Settings menu
Chapter 8
Initial Settings menu
1
Press DVD/CD
.
Using the Initial Settings menu
2
With playback stopped, press HOME
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
MENU and select ‘Initial Settings’.
Initial Settings
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
3
Use ꢂ/ꢃ/ꢀ/ꢁ and ENTER to select the
setting and option you want to set.
All the settings and options are explained on
the following pages.
1
Video Output settings
Setting
Option
What it means
TV Screen
4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
(See also Screen sizes
and disc formats on
page 38.)
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide)
Video
Set if you have a widescreen TV.
Standard video, compatible with all TVs.
Higher quality, but check your TV for compatibility.
Best quality, but check your TV for compatibility.
AV Connector Out
U.K. model only
(See Connecting auxil-
S-Video
iary audio components RGB
on page 31.)
HDMI Resolution*
U.K. model only
(See Connecting using
HDMI on page 33.)
1920x1080i
Set if your TV supports 1920 x 1080 pixel interlace video.
1280x720p
Set if your TV supports 1280 x 720 pixel progressive-scan video.
720x480p (NTSC) /
720x576p (PAL)
Set if your TV supports 720 x 480 (NTSC) / 720 x 576 (PAL) pixel
progressive-scan video.
* Default changes with
TV format (PAL/NTSC).
720x480i (NTSC) / 720x576i Set if your TV supports 720 x 480 (NTSC) / 720 x 576 (PAL) pixel
(PAL)
interlace video.
Note
1 • In the table, the default setting is shown in bold: other settings are shown in italics.
• Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
• U.K. model only – The AV Connector Out setting only needs to be set if you have connected this player to your TV using a
SCART cable.
• U.K. model only – The HDMI Resolution and HDMI Color settings only need to be set if you connected this player to an
HDMI-compatible component using the HDMI connector.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings menu
08
Setting
Option
What it means
HDMI Color
U.K. model only
Full range RGB
If colors are weak, this gives brighter colors and deeper black
(default setting for HDMI-compatible DVI devices).
(See Connecting using
HDMI on page 33.)
* Default changes
depending on device
connected.
RGB
Use this setting if colors appear overly rich on the Full Range
RGB setting.
Component
Outputs 8-bit component video format (default setting for
HDMI-compatible devices).
Set if your TV is not compatible with progressive scan video.
Component Out
Interlace
Australian model only
(See also Connecting
using the component
video output on
Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). Press ENTER once
more to confirm (or RETURN to cancel).
Note that progressive scan video is only output from the
component video jacks.
Progressive
page 32.)
Language settings
Setting
Option
What it means
Audio Language
English
If there is an English soundtrack on the disc, it is played.
If there is a language selected on the disc, it is played.
Languages as displayed
Other Language
Select to choose a language other than the ones displayed (see
Using the language code list on page 43).
Subtitle Language
English
If there are English subtitles on the disc they are displayed.
The subtitle language selected on the disc is displayed.
Languages as displayed
Other Language
Select to choose a language other than the ones displayed (see
Using the language code list on page 43).
DVD Menu
Language
w/Subtitle Lang.
DVD disc menus are displayed in the same language as your
selected subtitle language, if possible.
Languages as displayed
Other Language
DVD menus are displayed in the selected language, if possible.
Select to choose a language other than the ones displayed (see
Using the language code list on page 43).
Subtitle Display
On
Subtitles are displayed in your selected subtitle language.
Subtitles are always off by default when you play a DVD disc.
Off
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Initial Settings menu
Display settings
Setting
Option
What it means
OSD Language
English
On-screen displays of the player are in English.
On-screen displays are shown in the language selected.
Languages as displayed
Angle Indicator
On
A camera icon is displayed on-screen during multi-angle
scenes on a DVD disc.
Off
No multi-angle indication is shown.
Options settings
Setting
Option
What it means
Parental Lock
DivX(R) VOD
–
See Parental Lock below.
See About DivX® VOD content below.
Display
Speakers settings
Setting
Option
What it means
Speaker Distance
–
Specify the distance of your speakers from your listening
position (see Speaker Distance on page 30).
1
Select ‘Password’.
Parental Lock
• Default level: Off; Default password: none;
Initial Settings
Default Country/Area code: us (2119)
Video Output
Language
Display
Parental Lock
DivX (R) VOD
Password
Level Change
Country Code
To give you some control over what your
children watch on your DVD player, some DVD-
Video discs feature a Parental Lock level. If
your player is set to a lower level than the disc,
the disc won’t play.
Options
Speakers
2
Use the number buttons to input a 4-digit
password then press ENTER
Some discs also support the Country/Area
Code feature. The player does not play certain
scenes on these discs, depending on the
Country/Area Code you set.
.
Changing your password
To change your password, confirm your
existing password then enter a new one.
Registering a new password
Register a password to change the Parental
Lock level or enter a Country/Area code.
1
Select ‘Password Change’, input your
existing password, then press ENTER
.
1
2
Enter a new password and press ENTER.
Note
1 • Not all discs use Parental Lock, and will play without requiring the password first.
• If you forget your password, you’ll need to reset the player to register a new password (see Error Messages on page 43).
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings menu
08
• If you load a disc that contains DivX VOD
content not authorized for your player, the
message Authorization Error is displayed
and the content will not play.
Setting/changing the Parental Lock
1
2
Select ‘Level Change’.
Use number buttons to enter your
password, then press ENTER
.
Displaying your DivX VOD registration
code
3
Select a new level and press ENTER
.
• Press ꢀ repeatedly to lock more levels
(more discs will require the password);
press ꢁ to unlock levels. You can’t lock
level 1.
1
Press HOME MENU and select ‘Initial
Settings’.
2
Select ‘Options’, then ‘DivX (R) VOD’.
Initial Settings
Setting/changing the Country/Area code
You can find the Country/Area code list on
page 44.
Video Output
Parental Lock
DivX (R) VOD
Display
Language
Display
Options
Speakers
1
Select ‘Country Code’, input your
password, then press ENTER
.
2
Select a Country/Area code then press
3
Select ‘Display’.
ENTER
.
Your 8-digit registration code is displayed.
There are two ways you can do this:
Make a note of the code as you will need it
when you register with a DivX VOD provider.
• Select by code letter: Use ꢂ/ꢃ to change
the Country/Area code.
®
Playing DivX VOD content
• Select by code number: Press ꢁ then use
the number buttons to enter the 4-digit
Country/Area code.
Some DivX VOD content may only be playable
a fixed number of times. When you load a disc
containing this type of DivX VOD content, the
remaining number of plays is shown on-screen
and you then have the option of playing the
disc (thereby using up one of the remaining
plays), or stopping. If you load a disc that
contains expired DivX VOD content (for
example, content that has zero remaining
plays), the message Rental Expired is
displayed.
The new Country/Area code takes effect after
ejecting the disc once.
®
About DivX VOD content
In order to play DivX VOD (video on demand)
content on this player, you first need to register
the player with your DivX VOD content
provider. You do this by generating a DivX VOD
registration code, which you submit to your
If your DivX VOD content allows an unlimited
number of plays, then you may load the disc
into your player and play the content as often
as you like, and no message will be displayed.
1
provider.
Important
• DivX VOD content is protected by a DRM
(Digital Rights Management) system. This
restricts playback of content to specific,
registered devices.
Note
1 Resetting the player (as described in Error Messages on page 43) will not cause you to lose your registration code.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Initial Settings menu
• The subwoofer (SW) can be set from –2.1 m
to 0 m relative to the front left/right
speakers.
Speaker Distance
• Default setting: 3.0 m
To get the best surround sound from your
system, you should set up the speakers equal
distances from your listening position.
6
Press
ꢀ
to go back to the speaker list if
you want to modify another speaker, or press
ENTER to exit the Speaker Distance screen.
1
Press HOME MENU and select ‘Initial
Settings’.
2
3
4
Select ‘Options’, then ‘Speaker Distance’.
Initial Settings
Video Output
Speaker Distance
Language
Display
Options
Speakers
Use ꢂ/ꢃ to select a speaker.
Initial Settings
Video Output
L
3.0m
3.0m
3.0m
3.0m
3.0m
3.0m
Language
Display
C
R
Options
Speakers
SR
SL
SW
Press
ꢁ
to change the speaker distance
for the highlighted speaker.
5
Use ꢂ/ꢃ to change the distance.
• When you change the distance settings of
the front left (L) or front right (R) speakers,
all the other speaker distances change
relative to it.
• Front left/right (L/R) speaker distances can
be set from 30 cm to 9 m in 30 cm incre-
1
ments.
• The center speaker (C) can be set from –2.1
m to 0 m relative to the front left/right
speakers.
• Surround left/right (SL/SR) speakers can
be set from –6.0 m to 0 m relative to the
2
front left/right speakers.
Note
1 The L and R speakers are paired; you can’t set them differently.
2 XV-DV353/151 only – Make sure to set them the same distance when using Front Surround (page 14).
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Other connections
09
Chapter 9
Other connections
•
Connect the AUDIO IN jacks to the analog
outputs of an external playback component.
Connect using RCA pin-plug stereo cables.
Connecting external antennas
For an external AM antenna, use 5 m to 6 m of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
• XV-DV353/360 model – These jacks are
labeled LINE
2
on the rear panel.
• XV-DV151/252 model – These jacks are
labeled LINE on the rear panel.
Outdoor antenna
Indoor
antenna
(vinyl-coated
Connecting the S-video output
Australian model only
wire)
AM LOOP
5 m to 6 m
If your TV has an S-video input, you can use this
instead of the standard video output for a
better quality picture.
For an external FM antenna, use a PAL
connector to hook up an external FM antenna.
•
Use an S-video cable to connect the S-
VIDEO OUT to an S-video input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
ANTENNA
PAL connector
S-VIDEO
INPUT
Connecting auxiliary audio
components
TV
Using the stereo analog inputs, you can
connect an external component such as a tape
deck or MD player for playback through this
system.
C
R/
P
R
CONENT
VIDEO
FRONT
LINE
C
P
B/
VIDEO
L
B
Tape deck, etc.
R
S-VIDEO
Y
SURROUND
AUDIO IN
VIDEO OUT
AUDIO
OUTPUT
XV-DV151/252
FRONT
CENTER
LINE
2
R
R
L
L
AV CONNECTOR
R
SUB
WOOFER
SURROUND
L
VI
D
E
O
OUT
AUDIO IN
SPEAKERS
XV-DV353/360
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Other connections
Compatibility of this player with
progressive-scan and high-definition TVs.
This player is compatible with progressive
Connecting using the
component video output
2
video Macro Vision System Copy Guard.
Australian model only
If your TV has component video inputs, you can
use these instead of the standard video output
to connect this system to your TV. This should
give you the best quality picture from the three
types of video output available.
Using the SCART AV output
1
U.K. model only
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
•
Use a component video cable to connect
3
the COMPONENT VIDEO OUT to a set of
component inputs on your TV.
functions as both a video and audio output.
•
Use a commercially available SCART cable
to connect the (LINE 1) AV CONNECTOR to
your TV.
COMPONENT
INPUT
TV
TV
C
R/
P
R
COMPONENT
VIDEO
LINE
LINE
2
FRONT
R
R
C
B/
L
LINE
1
VIDEO
L
P
B
L
75
Ω
AV CONNECTOR
R
Ω
SURROUND
VI
D
E
O
OUT
AUDIO IN
R
S-VIDEO
Y
XV-DV353/360
AUDIO IN
VIDEO OUT
XV-DV151/252
SCART pin assignment
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible color TV/monitor.
About progressive scan video
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
Note
1 The component video output is switchable between interlaced and progressive formats. See Video Output settings on page 26.
2 Consumers should note that not all high-definition television sets are fully compatible with this product and may cause arti-
facts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch
the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this
model, please contact our customer service center.
3 SCART cables are available in several configurations. Make sure that the one you get will work with this system and your TV/
monitor (see SCART pin assignment above).
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Other connections
09
2
Use ꢀ/ꢁ to select REC MODE then press
ENTER
.
3
Use ꢂ/ꢃ to select MODE ON or MODE
OFF then press ENTER to confirm.
• MODE ON – Multichannel sources are
downmixed to stereo for recording (the
same downmix is heard through the front
speakers and the subwoofer).
Pin No. Assignment
Pin No. Assignment
1
Audio R OUT
Audio R IN
Audio L OUT
GND (audio)
GND (video)
Audio L IN
B OUT
12
13
14
15
16
17
18
19
20
21
No connection
GND (video)
GND (video)
R or C OUT
2
• MODE OFF – For regular multichannel
playback through your speaker system
(only the front left and right channels are
output from the AV CONNECTOR output).
3
4
5
BLANK OUT
GND (video)
GND (video)
Video or Y OUT
No connection
GND (video)
6
Connecting using HDMI
7
U.K. model only
8
Status
If you have a HDMI or DVI (with HDCP)
equipped monitor or display, you can connect
it to this player using a commercially available
9
GND (video)
No connection
G OUT
2
10
11
HDMI cable for high quality digital video.
See About HDMI below for more about the
HDMI connection.
Recording mode
•
Use an HDMI cable to connect the HDMI
The Recording mode allows you to make
OUT interconnect on this player to an HDMI
interconnect on a HDMI-compatible monitor.
surround-compatible analog recordings from
the AV CONNECTOR output. Dolby
1
multichannel sources will be downmixed to
stereo for improved playback with systems that
can provide matrix-decoding (like Dolby Pro
Logic).
1
Press SOUND.
Note
1 • When Recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and
use a prohibited function while Recording mode is on.
• The Recording mode switches off if you change the input function (DVD/CD, TUNER, etc.) or switch the power off.
2 An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital
Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIꢄHDMI) to do
so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.1. Depending on
the component you have connected, using a DVI connection may result in unreliable signal transfers.
• When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match
the new component (see Video Output settings on page 26 to do this).
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Other connections
Resetting the HDMI connection
If you get an error message (the display shows
HDMI ERR) or if the screen goes blank (for
example, after changing the resolution), check
the troubleshooting guide on page 42. If this
doesn’t solve the problem, follow the steps
below to reset the HDMI connection.
HDMI
connector
HDMI-compatible display
ANTENNA
1
Switch the system into standby.
FRONT
CENTER
LINE
2
R
R
L
L
LINE
1
FM
UNBAL75
Ω
LOOP
AV CONNECTOR
R
2
Press SETUP and use ꢀ/ꢁ to choose
SUB
WOOFER
SURROUND
L
VI
D
E
O
OUT
HDMI OUT
I O
AUDIO IN
SPEAKERS
HDMI INI then press ENTER
.
XV-DV353/360
The system will restart and the HDMI settings
are automatically reset to the factory defaults.
See Video Output settings on page 26 for more
on these settings.
• The arrow on the cable connector body
should be face up for correct alignment
with the connector on the player.
About HDMI
HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI
was developed to provide the technologies of
High Bandwidth Digital Content Protection
(HDCP) as well as Digital Visual Interface (DVI)
in one specification. HDCP is used to protect
digital content transmitted and received by DVI-
compliant displays.
You can also adjust the HDMI settings for
resolution and color. For more on these
settings see Video Output settings on page 26.
Switching the HDMI audio setting
To listen to audio from the HDMI interconnect,
make sure you’ve specified the HDMI audio
output setting.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multichannel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and AV
devices such as DTVs.
1
Switch the system into standby.
2
Press SETUP and use ꢀ/ꢁ to choose
HDMI OUT then press ENTER
.
3
Use ꢂ/ꢃ to choose the setting you want
then press ENTER
.
• AUDIO ON – Audio signals are output
through the HDMI interconnect
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
• AUDIO OFF – Switches off HDMI audio
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
10
Chapter 10
Additional information
About DualDisc playback
Disc / content format playback
compatibility
A DualDisc is a new two -sided disc, one side
of which contains DVD content video, audio,
etc. while the other side contains non-DVD
content such as digital audio material.
This player is compatible with a wide range of
disc types (media) and formats. Playable discs
will generally feature one of the following logos
on the disc and/or disc packaging. Note
however that some disc types, such as
recordable CD and DVD, may be in an
unplayable format.
The non-DVD, audio side of the disc is not
compliant with the CD Audio specification and
therefore may not play.
The DVD side of a DualDisc plays in this
product. DVD-Audio content will not play.
See the Disc compatibility table below for more
information.
For more detailed information on the DualDisc
specification, please refer to the disc
manufacturer or disc retailer.
Disc compatibility table
DVD-Video
DVD-R
DVD-RW
Media
Compatible formats
CD-R/RW
• CD-Audio, Video CD/Super VCD, ISO
9660 CD-ROM*
* ISO 9660 Level 1 or 2 compliant. CD
physical format: Mode1, Mode2 XA
Form1. Romeo and Joliet file systems
are both compatible.
Audio CD
Video CD
CD-R
CD-RW
• Multi-session playback: No
• Unfinalized disc playback: No
Fujicolor CD
DVD-R/RW • DVD-Video (Video mode), Video
Recording (VR)*, UDF Bridge DVD-ROM
* Edit points may not play exactly as
edited; screen may go momentarily
blank at edited points.
• This unit will play DVD+R/+RW discs.
•
•
is a trademark of Fuji Photo Film Co. Ltd.
is a trademark of DVD Format/Logo
Licensing Corporation.
• Multi Border playback: No
• Unfinalized playback: No
• Also compatible with KODAK Picture CD.
This player supports the IEC’s Super VCD stan-
dard for superior picture quality, dual
soundtracks, and widescreen support.
PC-created • Discs recorded using a PC may not
disc
be playable due to the setting of the
software used to create the disc. In
these instances, check the DVD-R/RW
or CD-R/RW software manual or disc
boxes for more on compatibility.
• Discs recorded in packet write mode
are not compatible.
VIDEO
CD
Super Video CD (Super VCD)
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
About DivX
Media
Compatible formats
DivX is a compressed digital video format
created by the DivX video codec from
DivXNetworks, Inc. This player can play DivX
video files burned on CD-R/RW and DVD-R/
RW/ROM discs. Keeping the same
Compressed • MPEG-1 Audio Layer 3 (MP3),
®
audio
Windows Media Audio (WMA), MPEG-
4 AAC
• Sampling rates: 32 kHz / 44.1 kHz /
48 kHz
• Bit-rates: Any (128 Kbps or higher
recommended)
terminology as DVD-Video, individual DivX
video files are called ‘Titles’. When naming
files/titles on a CD-R/RW or DVD-R/RW disc
prior to burning, keep in mind that by default
they will play in alphabetical order.
• VBR (variable bit rate) MP3/WMA/
MPEG-4 AAC playback: No
• WMA lossless encoding: No
• DRM (Digital Rights Management)
compatible: Yes (DRM-protected audio
files will not play in this player).
• File extensions: .mp3, .wma, .m4a
(these must be used for the player to
recognize MP3/WMA/MPEG-4 AAC
files)
DivX video compatibility
®
• Official DivX Certified product.
®
• Plays all versions of DivX video (including
®
®
DivX 6) with standard playback of DivX
1
media files.
• File structure (may differ): Up to 299
folders on a disc; up to 648 folders and
files (combined) within each folder
• File extensions: .avi and .divx (these must
be used for the player to recognize DivX
video files). Note that all files with the .avi
extension are recognized as MPEG4, but not
all of these are necessarily DivX video files
and therefore may not be playable on this
player.
JPEG file
• Baseline JPEG and EXIF 2.2* still
image files up to a resolution of 3072 x
2048.
*File format for digital still cameras
• Progressive JPEG compatible: No
• File extensions: .jpg (must be used
for the player to recognize JPEG files)
Displaying DivX subtitle files
• File structure (may differ): Up to 299
folders on a disc; up to 648 folders and
files (combined) within each folder
The font sets listed below are available for DivX
external subtitle files. You can see the proper
font set on-screen by setting the Subtitle
Language (in Language settings on page 27)
2
to match the subtitle file.
About DVD+R/DVD+RW compatibility
Only DVD+R/DVD+RW discs recorded in
‘Video Mode (DVD Video Mode)’ which have
been finalized, can be played back. However,
some editing made during the recording may
not be played back accurately.
Group 1: Albanian (sq), Basque (eu), Catalan (ca),
Danish (da), Dutch (nl), English (en), Faroese (fo),
Finnish (fi), French (fr), German (de), Icelandic (is), Irish
(ga), Italian (it), Norwegian (no), Portuguese (pt), Rhaeto-
Romanic (rm), Scottish (gd), Spanish (es), Swedish (sv)
Group 2: Albanian (sq), Croatian (hr), Czech (cs),
Hungarian (hu), Polish (pl), Romanian (ro), Slovak (sk),
Slovenian (sl)
Note
1 Playback of .avi video files larger than 4GB is not possible.
2 • For external subtitle files the following subtitle format filename extensions are supported (please note that these files are not
shown within the disc navigation menu): .srt, .sub, .ssa, .smi
• Some external subtitle files may be displayed incorrectly or not at all.
• The filename of the movie file has to be repeated at the beginning of the filename for the external subtitle file.
• The number of external subtitle files which can be switched for the same movie file is limited to a maximum of 10.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
10
Group 3: Bulgarian (bg), Byelorussian (be), Macedonian
(mk), Russian (ru), Serbian (sr), Ukrainian (uk)
Group 4: Hebrew (iw), Yiddish (ji)
Using and taking care of discs
Group 5: Turkish (tr)
Handling discs
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under
license.
Hold the disc by its edges when handling so as
not to leave fingerprints, dirt or scratches on
either side of the disc. Damaged or dirty discs
can affect playback performance.
About MPEG-4 AAC
If a disc becomes marked with fingerprints,
dust, etc., clean using a soft, dry cloth.
Advanced Audio Coding (AAC) is at the core of
the MPEG-4 AAC standard, which incorporates
MPEG-2 AAC, forming the basis of the MPEG-4
audio compression technology. The file format
and extension used depend on the application
used to encode the AAC file. This unit plays
®
back AAC files encoded by iTunes bearing the
Wipe lightly from the center of the disc using
straight strokes. Don’t wipe the disc surface
with circular strokes.
extension '.m4a'. DRM-protected files will not
play, and files encoded with some versions of
®
iTunes may not play, or filenames may display
If necessary, use a cloth soaked in alcohol, or a
commercially available CD/DVD cleaning kit to
clean a disc more thoroughly. Never use
benzine, thinner or other cleaning agents such
as those designed for cleaning vinyl records.
incorrectly.
Apple and iTunes are trademarks of Apple Computer,
Inc., registered in the U.S. and other countries.
About WMA
Storing discs
Avoid leaving discs in excessively cold, humid,
or hot environments (including under direct
sunlight). Don't glue paper or put stickers onto
the disc, or use a pencil, ball-point pen or other
sharp-tipped writing instrument. These could
all damage the disc.
®
The Windows Media logo printed on the box
indicates that this player can playback
Windows Media Audio content.
Discs to avoid
WMA is an acronym for Windows Media Audio
and refers to an audio compression technology
developed by Microsoft Corporation. WMA
content can be encoded by using Windows
Discs spin at high speed inside the player. If a
disc is cracked, chipped, warped, or otherwise
damaged, don't risk using it in your player—
you could end up damaging the unit.
®
®
Media Player version 7, 7.1, Windows Media
This unit is designed for use with conventional,
fully circular discs only. Pioneer disclaims all
liability arising in connection with the use of
shaped discs.
®
®
Player for Windows XP, or Windows Media
Player 9 Series.
Microsoft, Windows Media, and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
DVD Video regions
Cleaning the pickup lens
All DVD Video discs carry a region mark that
indicates which region(s) of the world the disc
is compatible with. Your DVD system also has
a region mark (on the rear panel). Discs from
incompatible regions will not play in this
player. Discs marked ALL play in any player.
The DVD player’s lens should not become dirty
in normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center.
Although lens cleaners are commercially
available, we do not recommend using them
since some may damage the lens.
Installation and maintenance
Problems with condensation
Condensation may form inside the player if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won’t damage the
player, it may temporarily impair performance.
Leave it to adjust to the warmer temperature
for about an hour before switching on.
Hints on installation
We want you to enjoy using this system for
years to come, so please bear in mind the
following points when choosing a location:
Do...
ꢅ Use in a well-ventilated room.
ꢅPlace on a solid, flat, level surface, such as a
Moving the system unit
table, shelf or stereo rack.
If you need to move the main unit, first remove
a disc if there’s one in the player, then press ꢃ
STANDBY/ON on the front panel to turn the
system off. Wait for GOOD BYE to disappear
Don’t...
ꢆ Use in a place exposed to high temperatures or
humidity, including near radiators and other
heat-generating appliances.
1
from the display, then unplug the power cord.
Never lift or move the unit during playback—
discs rotate at high speeds and may damage.
ꢆ Place on a window sill or other place where the
system will be exposed to direct sunlight.
ꢆ Use in an excessively dusty or damp
environment.
ꢆ Place directly on top of an amplifier, or other
component in your stereo system that becomes
hot in use.
ꢆ Use near a television or monitor as you may
experience interference—especially if the
television uses an indoor antenna.
Screen sizes and disc formats
DVD-Video discs come in different screen
aspects, ranging from TV programs, which are
generally 4:3, to CinemaScope widescreen
2
movies , with an aspect ratio of up to about 7:3.
ꢆ Use in a kitchen or other room where the system
may be exposed to smoke or steam.
Televisions also come in different aspect
3
ꢆ Use on a thick rug or carpet, or cover with
cloth—this may prevent proper cooling of the
system unit.
ꢆ Place on an unstable surface, or one that is not
large enough to support all four of the system
unit’s feet.
ratios; ‘standard’ 4:3 and widescreen 16:9.
Set to 4:3 (Letter Box), widescreen
discs are shown with black bars top
and bottom.
Note
1 Unplugging the unit before GOOD BYE disappears from the display may cause the system to return to the factory settings.
2 Many widescreen discs override the system’s settings so that the disc is shown in letterbox format regardless of the setting.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
10
Set to 4:3 (Pan&Scan), widescreen
discs are shown with the left and right
sides cropped. Although the picture
looks larger, you don’t actually see
the whole picture.
Player setting
Format NTSC PAL AUTO
Media Type
CD/MP3/WMA/
MPEG-4 AAC/
JPEG/no disc
NTSC PAL NTSC or
PAL
—
TV system setting
The default setting of this system is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you find picture distortion with
some discs, set the TV system to match your
country or region’s system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
Frequency step setting
Australian model only
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1
Switch the unit into standby, then press
SETUP
.
1
each setting (AUTO, PAL and NTSC).
2
Use ꢀ/ꢁ to choose AM 9K/10K then
press ENTER
.
1
Switch the unit into standby, then press
SETUP
.
3
Use ꢂ/ꢃ to select AM 9K or AM 10K then
press ENTER
.
2
Use ꢀ/ꢁ to choose TV SYS then press
ENTER
.
The TV system changes as follows:
Switching off the demo
• AUTO ꢄ NTSC
• NTSC ꢄ PAL
• PAL ꢄ AUTO
Follow the steps below to switch the automatic
demo feature off (this starts when you plug in
for the first time):
1
2
With the unit in standby, press SETUP
.
The system automatically switches on and
you’ll see the new TV system setting in the
display after seeing WELCOME.
Use ꢀ/ꢁ to choose DEMO then press
2
ENTER
Use ꢂ/ꢃ to select DEMO OFF and press
ENTER
.
3
Player setting
.
Format NTSC PAL AUTO
Media Type
DVD/Super VCD/ NTSC
NTSC PAL NTSC
NTSC PAL PAL
Video CD/DivX
PAL
Video
Note
3 • Using the 16:9 (Wide) setting with a standard 4:3 TV, or one of the 4:3 settings with a widescreen TV, will result in distortion.
• When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV
may offer various zoom and stretch options; see the instructions that came with your TV for details.
• Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a ‘letterbox’ style.
1 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col-
or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has
a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at
the top and bottom of the screen.
2 You have to switch the player into standby (press ꢃ STANDBY/ON) before each change.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Investigate the other components and electrical appliances being used. If the
trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
• If the system does not operate normally due to external effects such as static electricity
disconnect the plug from the outlet and insert again to return to normal operating conditions.
General
Problem
Remedy
The power does not turn • Wait for one minute before switching back on.
on, or switches off
suddenly (an error
message may be
• Make sure there are no loose strands of wire touching the unit. This could cause
the system to shut off automatically.
• Check that the speakers are connected correctly.
• Make sure the voltage of the mains power source is correct for the model.
• Try reducing the volume level.
displayed at startup).
• If the problem persists, take it to your nearest Pioneer authorized service center
or your dealer for servicing.
No sound is output
when a function is
selected.
• If you’re using the line input, make sure the component is connected correctly
(see Connecting auxiliary audio components on page 31).
• Press MUTE on the remote control to turn muting off.
No sound from surround • Refer to Setting the channel levels on page 9 to check the speaker levels.
or center speakers.
• When TUNER or LINE is selected, you can only hear the source in stereo. Switch
the input source to DVD/CD or USB for multichannel sound.
• Check that the Recording mode hasn’t been switched on (seeRecording mode on
page 33).
• Check that you haven’t selected the STEREO mode (see Listening in surround
sound on page 14).
• Connect the speakers properly (refer to the Setup Guide).
Can’t operate the remote • Replace the batteries (refer to the Setup Guide).
control. • Operate within 7 m, 30° of the remote sensor (refer to the Setup Guide).
• Remove any obstacles or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
TRAYLOCK shows in the • Press and hold ꢀ (eject) on the front panel for about eight seconds. Then the tray
display and the tray can’t can be opened/closed using ꢀ (eject).
be ejected.
SND. DEMO shows in
• Press and hold ꢂ (stop) on the front panel for about five seconds. The disc tray
the display and the unit ejects automatically to indicate the Sound Demo mode is disabled.
can’t be controlled.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
10
DVD/CD/Video CD player
Problem
Remedy
The disc is ejected
automatically after
loading.
• Clean the disc and align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on the
player, the disc cannot be used (see DVD Video regions on page 38).
• Allow time for any condensation inside the player to evaporate. Avoid using the
player near an air-conditioning unit.
Playback not possible.
• If the disc is loaded upside down, reload the disc with label side face up.
Picture playback stops • Press ꢂ (stop), then ꢄ (play) to start playback again.
and buttons cannot be • Switch the power off once, then on again using the front panel
used.
ꢃ STANDBY/ON button.
Settings are canceled.
No picture/No color.
• When the power is cut, settings will be canceled.
• Check that connections are correct and that plugs are inserted fully.
• Check the manual of the TV/monitor to make sure the settings are correct.
Screen is stretched or
• The TV Screen setting is incorrect. Set the TV Screen option to match the TV/
aspect doesn’t change. monitor you're using (see Video Output settings on page 26).
When recorded on a • This system uses copy-protection technology which may prevent recording or
VCR or passed through cause picture problems when connected through a VCR or AV selector. This is not
an AV selector, there is a malfunction.
disturbance in the
playback picture.
Picture disturbance
• This player is compatible with Macro-Vision System copy guard. Some discs
during playback or dark. include a copy prevention signal, and when this type of disc is played back, stripes
etc., may appear on some sections of the picture depending on the TV. This is not a
malfunction.
• Discs respond differently to particular player functions. This may result in the
screen becoming black for a brief instant or shaking slightly when the function is
executed. These problems are largely due to differences between discs and disc
content and are not malfunctions of this player.
Noticeable difference in • DVDs and CDs use different recording methods. This is not a malfunction.
DVD and CD volume.
CD-ROM disc is not
recognized.
• Make sure that the CD-ROM was recorded using the ISO 9660 disc format. See
Disc compatibility table on page 35 for more on disc compatibility.
DVD-ROM disc is not
recognized.
• Make sure that the DVD-ROM was recorded using the UDF bridge format. See
Disc compatibility table on page 35 for more on disc compatibility.
Files don’t show up in
the Disc Navigator/
Photo Browser.
• The files on the disc must be named with the correct file extension: .mp3 for MP3
files; .wma for WMA files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or
lower-case is OK). See Disc compatibility table on page 35.
Can’t play WMA or
MPEG-4 AAC files.
• The files were recorded using DRM (digital rights management).This is not a
malfunction.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
Tuner
Problem
Remedy
Considerable noise in
radio broadcasts.
• Connect the AM antenna (refer to the Setup Guide) and adjust the direction and
position for best reception. You may also connect an additional internal or external
AM antenna (refer to Connecting auxiliary audio components on page 31).
• Fully extend the FM wire antenna, position for best reception, and secure to a
wall. You may also connect an outdoor FM antenna (see Connecting external
antennas on page 31).
• Turn off other equipment that may be causing the noise or move it further away.
• Australian model only – The tuning interval is incorrect for your country or
region. See Frequency step setting on page 39 to switch the tuning interval.
Auto tuning does not
pick up some stations.
• The radio signal is weak. Auto tuning will only detect radio stations with a good
signal. For more sensitive tuning, connect an outdoor antenna.
USB connection
Problem
Remedy
USB mass storage
• Make sure you have completely inserted the USB connector to this unit.
device is not recognized • Check that the memory format is FAT16 or FAT32.
by the system.
• USB devices with an internal USB hub are not supported.
Files don’t show up in
the Navigator/Photo
Browser.
• The files must have the correct file extension: .mp3 for MP3 files; .wma for WMA
files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or lower-case is OK).
• Make sure the file permission hasn’t been restricted (through a password, etc.).
Can’t play WMA or
MPEG-4 AAC files.
• The files were recorded using DRM (digital rights management) or FairPlay copy-
protection. This is not a malfunction.
HDMI connection (U.K. model only)
Problem Remedy
No HDMI audio output. • See Switching the HDMI audio setting on page 34 to make sure that AUDIO ON
is selected.
No HDMI video output
• Make sure that you’ve selected this player as the HDMI input in the settings for
the component you’re using (refer to the component’s instruction manual).
• Check that the HDMI cable is connected properly and isn’t damaged.
• Check that components connected using the HDMI interface are switched on
and HDMI compatible. (components must be compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP).)
• This unit has been designed to be compliant with HDMI Version 1.1. Depending
on the component you have connected, using a DVI connection may result in
unreliable signal transfers.
• Make sure the resolution on this player matches that of the component you have
connected using HDMI (see Video Output settings on page 26).
• If the screen goes blank after changing the resolution, it means the you selected
a resolution incompatible with your monitor. See Resetting the HDMI connection
on page 34 to reset to the factory defaults.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
10
Problem
Remedy
Color problems occur
• Depending on the connected equipment, some HDMI Color settings may cause
with your monitor after the picture to be displayed incorrectly. In this case, use the TV's own video input
changing the HDMI settings to select RGB, if possible. Alternatively, revert to the previous HDMI Color
Color setting (page 26). setting.
Error Messages
Message
Description
REC MODE (U.K. model) • An operation is prohibited because the Recording Mode is on (page 33).
SND. DEMO
CANNOT
• The sound demo is on. See General in Troubleshooting on page 40.
• An operation is prohibited because DVD/CD isn’t selected, headphones are
connected, or TEST TONE is pressed during disc playback.
MUTING
STEREO
• An operation is prohibited because the sound is muted (press MUTE).
• An operation is prohibited because the DVD/CD or USB function isn’t selected.
• The tray lock is on. See General in Troubleshooting on page 40.
TRAYLOCK
USB ERR
• See Important in Using the USB interface on page 22 for more on this.
HDMI ERR (U.K. model) • See HDMI connection (U.K. model only) above for troubleshooting tips. See also
Resetting the HDMI connection on page 34 if the problem persists.
EEP ERR
EXIT
• Contact your Pioneer authorized service center or your dealer for servicing.
• Appears when a menu is automatically exited after a set period of inactivity.
2
Use ꢂ/ꢃ to select LOCK ON or LOCK OFF
Resetting the system
then press ENTER
.
Use this procedure to reset all system settings
to the factory default.
Using the language code list
•
With the system on, press ꢀ STANDBY/
Some of the language options (see Language
settings on page 27) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
ON while holding down ꢁ USB (front
panel).
The next time you switch on, all the system
settings should be reset.
1
Select ‘Other Language’.
2
Use ꢀ/ꢁ to select either a code letter or
Setting the Key Lock
a code number.
You can disable the front panel buttons by
switching the Key Lock feature on.
3
Use ꢂ/ꢃ to select a code letter or a code
number.
1
With the system in standby, press SETUP
and use ꢀ/ꢁ to choose KEYLOCK then press
ENTER
This is shown in the front panel display.
See the Language code list (next page) for a
complete list of languages and codes.
.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
Language code list
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Dutch (nl), 1412
Russian (ru), 1821
Chinese (zh), 2608
Korean (ko), 1115
Greek (el), 0512
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Lingala (ln), 1214
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swedish (sv), 1922
Swahili (sw), 1923
Tamil (ta), 2001
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Kirghiz (ky), 1125
Latin (la), 1201
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Portuguese (pt), 1620
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813 Ukrainian (uk), 2111
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Welsh (cy), 0325
Danish (da), 0401
Bhutani (dz), 0426
Esperanto (eo), 0515
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Country/Area code list
Country/Area, Country/Area code, Country/Area code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
China, 0314, cn
Denmark, 0411, dk
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Philippines, 1608, ph
Portugal, 1620, pt
Russian Federation, 1821, ru
Singapore, 1907, sg
Spain, 0519, es
Switzerland, 0308, ch
Sweden, 1905, se
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
United States of America, 2119, us
Japan, 1016, jp
Korea, Republic of, 1118, kr
Malaysia, 1325, my
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Specifications
10
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setup Guide
•
Amplifier section
These operating instructions
RMS Power Output:
Front, Center, Surround . . . 60 W per channel
(1 kHz, 10 % T.H.D., 4 Ω)
S-DV353 Speaker system
50 W per channel
(1 kHz, 10 % T.H.D., 6 Ω)
Subwoofer . . 60 W (100 Hz, 10 % T.H.D., 4 Ω)
50 W (100 Hz, 10 % T.H.D., 6 Ω)
•
Front/surround speakers
Enclosure . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System. . . . . . . . . . . . . . . . . 7.7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . . . 7.7 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 4 Ω
Frequency range . . . . . . . . . . . . 80 Hz to 20 kHz
Maximum input power. . . . . . . . . . . . . . . . . 60 W
Dimensions . . 100 (W) mm x 136 (H) mm x 80 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.55 kg
•
Disc section
Digital audio
characteristics . . . . . . . . .DVD fs: 96 kHz, 24-bit
Type. . . . . . . .DVD system, Video CD/Super VCD
system and Compact Disc digital audio system
Frequency
response. . . . 4 Hz to 44 kHz (96kHz sampling) /
4 Hz to 22 kHz (48kHz sampling)
Wow and Flutter. . . . . . . . Limit of measurement
•
Center speaker
Enclosure . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
(
0.001 % W.PEAK) or less (JEITA)
System. . . . . . . . . . . . . . . . . 7.7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . . . 7.7 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 4 Ω
Frequency range . . . . . . . . . . . . 75 Hz to 20 kHz
Maximum input power. . . . . . . . . . . . . . . . . 60 W
Dimensions . . . 270 (W) mm x 96 (H) mm x 90 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.78 kg
•
FM tuner section
Frequency range . . . . . . . . 87.5 MHz to 108 MHz
Antenna . . . . . . . . . . . . . . . . . . 75 Ω, unbalanced
•
AM tuner section
Frequency range:
With 9kHz step. . . . . . . . . 531 kHz to 1602 kHz
With 10kHz step (Not applicable
to the U.K. model) . . . . . . 530 kHz to 1700 kHz
Antenna . . . . . . . . . . . . . . . . . . . . . Loop antenna
•
Subwoofer
Enclosure . . . . . . Bass-reflex floorstanding type
System. . . . . . . . . . . . . . . . . 16 cm 1-way system
Speaker . . . . . . . . . . . . . . . . . . . .16 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 4 Ω
Frequency range . . . . . . . . . . . . 30 Hz to 2.5 kHz
Maximum Input Power. . . . . . . . . . . . . . . . . 60 W
Dimensions . . . 190 (W) mm x 360 (H) mm x 320 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 kg
•
Miscellaneous
Power requirements:
U.K. model . . AC 220V to 240 V, 50 Hz / 60 Hz
Australian model. . . . AC 240 V, 50 Hz / 60 Hz
Power consumption . . . . . . . . . . . . . . . . . . .44 W
Power consumption in standby . . . . . . . . 0.36 W
Dimensions . . 420 (W) mm x 60 (H) mm x 330 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 kg
•
Accessories
Speakercables . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Speaker stands (for surround speakers) . . . . . 2
Screws (for stands). . . . . . . . . . . . . . . . . . . . . . . 2
Non-skid pads (small) . . . . . . . . . . . . . . . . . . . 20
Non-skid pads (large). . . . . . . . . . . . . . . . . . . . . 4
•
Accessories (DVD/CD receiver)
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/R6 dry cell batteries
(to confirm system operation) . . . . . . . . . . . . . . 2
Video cable (yellow plugs) . . . . . . . . . . . . . . . . . 1
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . 1
FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Additional information
S-DV151 Speaker system
S-DV360 (T / SW), S-DV1T, S-DV252SW
Speaker system
•
Front speakers
Enclosure. . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
•
Front/surround speakers (T)
Enclosure . . . . . . .Closed-box floorstanding type
(magneticallyshielded)
System . . . . . . . . . . . . . . . . . . . . . . .2-way system
Speakers:
Woofer . . . . . . . . . . . . . . . .7.7 cm cone typex2
Tweeter . . . . . . . . . . . 2.6 cm semi-dome type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 4 Ω
Frequency range . . . . . . . . . . . . .70 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . . . .60 W
Dimensions . . 260 (W) mm x 1095 (H) mm x 260 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 kg
System . . . . . . . . . . . . . . . . .7.7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . . . 7.7 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . 90 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . . . . 60 W
Dimensions. .105 (W) mm x 115 (H) mm x 114 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 kg
•
Center speaker
Enclosure. . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . .7.7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . . . 7.7 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . 90 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . . . . 60 W
Dimensions. .115 (W) mm x 105 (H) mm x 114 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 kg
•
Center speaker (T)
Enclosure . . . . . . . . . .Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . 7.7 cm 1-way system
Speakers. . . . . . . . . . . . . . . . . . 7.7 cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 4 Ω
Frequency range . . . . . . . . . . . . .75 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . . . .60 W
Dimensions . . . 270 (W) mm x 96 (H) mm x 90 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.78 kg
•
Surround speakers
Enclosure. . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . .7.7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . . . 7.7 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . 100 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . . . . 60 W
Dimensions. .105 (W) mm x 118 (H) mm x 114 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.63 kg
•
Subwoofer (SW)
Enclosure . . . . . . .Bass-reflex floorstanding type
System . . . . . . . . . . . . . . . . . 16 cm 1-way system
Speaker. . . . . . . . . . . . . . . . . . . . 16 cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 4 Ω
Frequency range . . . . . . . . . . . . 30 Hz to 2.5 kHz
Maximum Input Power . . . . . . . . . . . . . . . . .60 W
Dimensions . . .190 (W) mm x 360 (H) mm x 320 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 kg
•
Subwoofer
Enclosure. . . . . . . . . . . . . . .Bass-reflex floor type
System . . . . . . . . . . . . . . . . . 16 cm 1-way system
Speaker . . . . . . . . . . . . . . . . . . . 16 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . .30 Hz to 2.0 kHz
Maximum Input Power. . . . . . . . . . . . . . . . . 60 W
Dimensions. .190 (W) mm x 360 (H) mm x 317 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 kg
•
Accessories
Speaker cables (S-DV360T). . . . . . . . . . . . . . . . . 5
Speaker cables (S-DV360SW). . . . . . . . . . . . . . . 1
Small non-skid pads (for center speaker) . . . . . 4
Large non-skid pads . . . . . . . . . . . . . . . . . . . . . 20
Note
•
Accessories
• Specifications and design subject to
possible modification without notice, due
to improvements.
Non-skid pads (small). . . . . . . . . . . . . . . . . . . . 12
Non-skid pads (large) . . . . . . . . . . . . . . . . . . . . . 4
Mounting brackets . . . . . . . . . . . . . . . . . . . . . . . 4
Screws (for mounting brackets) . . . . . . . . . . . . 4
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
10
This product includes FontAvenue®
fonts licenced by NEC corporation.
FontAvenue is a registered trademark
of NEC Corporation.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is
intended for home and other limited uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
DRM (digital rights management)
copy protection is a technology
designed to prevent unauthorized
copying by restricting playback, etc. of
material on devices other than the PC
(or other WMA recording equipment)
used to record it. For detailed
information, please see the instruction
manuals or help files that came with
your PC and/or software.
Manufactured under license from Dolby
Laboratories.“Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation
Copyright ©2006 Pioneer Corporation
All rights reserved
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
<06A000001>
Printed in
<ARB7352-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|