ObstiVision
maintenance free LED obstacle light
lighting solutions that really last
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of obstacle lights
N1
the new generation
X
obstruction lighting system
N2
Y
Obstacle light to mark the presence of tall structures that may
present hazards to air navigation at night time is a legal
requirement.The lighting system must be designed to meet
International Civil Aviation Organisation (ICAO) standards for
product specification and placement.
Y (metres)
—————
Number of lights = N =
45
Y
——– ≤ 45 m
Light spacing = X =
N
The key points that must be adhered to are
• To reduce the hazards to the aircraft, obstacles
Traditionally obstacle light has used incandescent
technology.The short lifetime of the incandescent
lamps of approximately 1,000 hours and their
susceptibility to failure caused by vibration required
that the fitting have two lamps.This ensured that in
the event of one failure the other lamp could take
over.This system required constant and frequent
lamp changing, costly maintenance, and was high in
energy consumption.
above the horizontal surface should be lighted to
indicate the presence of the obstacles
• The light must be fixed, and red in colour
• Minimum peak intensity at background
luminance of up to 500cd/m2: 10cd for low
intensity type A and 32cd for low intensity type B
• Vertical beam spread of not less than 10 degrees
• Minimum intensity (cd) at given elevation
angles when the light is levelled: +6 degrees:
10cd for low intensity type A and 32cd for low
intensity type B
Now, the benefits of the latest in Light Emitting
Diode (LED) technology can provide a far superior
solution. By taking advantage of its long lifetime of
approximately 100,000 hours, low power consump-
tion, and resistance to shock and vibration of LEDs,
the Philips ObstiVision provides an ideal, mainte-
nance free solution to obstruction lighting system.
• Minimum intensity (cd) at given elevation angles
when the light is levelled: +10 degrees: 10cd for
low intensity type A and 32cd for low
intensity type B
• In addition to specified values, lights shall have
sufficient intensity to ensure conspicuity at
The standards and requirements of obstacle light
Obstruction lighting systems must meet the
requirements of the ICAO International Civil
Aviation Organisation Standards and Recommended
Practices:Aerodromes- Annex 14-Volume 1, 3rd
Edition, July 1999, Chapter 6.
-
elevation angles between +/ 0 degrees and
50 degrees
ObstiVision in practice
ObstiVision is a dedicated maintenance-free
obstacle light for aviation warning purposes. Light
emitting diode (LED) technology is chosen to be
the light source of this product. ObstiVision is
suitable to be used as a Low Intensity,Type A and
Type B obstacle lights according to ICAO standard.
Typical applications for Obstivison would include
telecommunication towers, tall buildings, airport
areas and power transmission towers.
The guidelines for the type and location of
obstacle lights are contained within the ICAO
standard as described.
Download from Www.Somanuals.com. All Manuals Search And Download.
The benefits of LED technology
LEDs are a time tested solid state technology that emits a single colour of
light when an electric current is applied.They are revolutionising the lighting
world. Numerous benefits of this technology include extreme long life,
reliability and exceptional energy efficiency. Compared to a standard
incandescent solution the benefits in energy consumption and maintenance of
using the ObstiVision LED solution are clear:
Benefit Comparison
Typical Incandescent type
Philips ObstiVision low intensity type A
Lamp
Incandescent or special incandescent
High intensity light emitting diode (LED)
Power consumption per luminaire (forType A) 100w (200W twin type)
Max 7W
Lamp average life (hours)
Lamp life warranty
4000 hours (50% burnt out)
Not available
100,000 hours
5 years
ICAO standard met
Yes
Yes
IP protection against dust and water
Operating voltage
Typically IP55
IP65 (dust tight and jet proof)
210-250Vac constant light output or 24Vdc/48Vdc
<1.0 kg
220-240Vac 50 Hz
5.0-7.5 kg
Weight
Wind load at 200 km/h
Operating temperature
Light Intensity (ICAO low intensity type A)
Colour
Higher than 40N
Less than 40N
-55 to +55 degrees Celsius
>10 cd forType A, >32 cd forType B
Aviation Red (ICAO)
-40 to +70 degrees Celsius
>10 cd forType A, >32 cd forType B
Aviation Red (ICAO)
Vibration resistance
Susceptible to failure due to shock and vibration Resistant to shock and vibration
Intensity varies with voltage fluctuation Stable with constant current generator (210-250V)
Supply voltage affect on light output
Save time, money and hassle with ObstiVision
The efficiency, reliability and freedom from maintenance that characterise
ObstiVision will save you money over time! Considering the cost of
ownership, you can have your payback period as short as 1 year by using
ObstiVision as compared to the conventional obstruction lighting system.
Download from Www.Somanuals.com. All Manuals Search And Download.
product details
Technical descriptions
Mechanical
• Yellow powder painted high pressure die-cast aluminium housing
• UV-protected clear glass cover – 5mm thick
• Stainless steel plate to support LED unit
-
• Operating temperature = 40°C to +70°C
• IP65
• Wind load at 200 km/hr of less than 40 Newton force
• Threaded base for 1 inch in diameter size of pipe
(other size can be applied with the reducer or enlarger)
Electrical
• Standard type using nominal operating voltage of 48Vdc or
220-240Vac; 24Vdc systems are available upon request
• Terminal block for 2 x 1.5mm2 cables
• Power consumption: 5W for 48VdcType A version, 7W for
220-240VacType A version and 12W for 48VdcType B version
• Constant current 100mA forType A, 250mA forType B
• Surge protection device integrated: according to Institute of
Electrical and Electronics Engineers (IEEE) requirement
Optical
• Luminous intensity of greater than 10 cd for low intensity
type A obstacle light and greater than 32 cd for low intensity
type B obstacle light
• Horizontal radiation coverage 360°
• Vertical radiation coverage 50°
Dimensional Sketches
• Color: aviation red, choice of fixed or flashed light
Ø113
Installation
• Pipe installation: the standard luminaire comes with threaded
base – ready to be installed with threaded pipe of 1 inch in
diameter (other size of pipe – use standard reducer or enlarger)
• To attach ObstiVision with existing antenna /pipe or
wall-mounted installation, the mounting kit is required.
Accessories
• Control box *
96
66
G1”
• Photo switch and sensor
• Mounting accessories *
• 3-way and 4-way junction box for through-wiring
• Solar cell
dimensions in mm
Ordering Data
Product Code
Description
Ordering Number
9199 186 76132
XGP388 48Vdc A
ObstiVision 48VdcType A
XGP388 220-240Vac
50-60Hz A/AF
ObstiVision 220-240Vac 50-60HzType A
(flasher selector is integrated)
9199 186 77132
Product compliances
• Product compliance with International Civil Aviation Organization
(ICAO) standards and recommended practices – Aerodromes
Annex 14Volume 1, 3rd edition – July 1999, Chapter 6.
• Federal Aviation Administration (FAA) standard
XGP388 48Vdc B
ObstiVision 48VdcType B
9199 186 76532
9199 186 72732
ZGB388 220-240Vac
50-60Hz / 48Vdc L P
Control Box 220-240Vac 50-60Hz input
48Vdc output with photo switch
ZBG388 220-240Vac
50-60Hz / 48Vdc LT
ontrol Box 220-240Vac 50-60Hz input
48Vdc output with timer
9199 186 72232
ZGP388TW3
ZGP388TW4
ZPP388
3-way throughwiring junction box
4-way throughwiring junction box
Mounting Kit - pipe installation
Mounting Kit - building top installation
Mounting Kit - wall mounted installation
Photo sensor
9199 186 71032
9199 186 71132
9199 186 70032
9199 186 70132
9199 186 70232
9199 186 70332
* please check with your local Philips agent for details
ZVB388
Specifications subject to modification
All intellectual property rights reserved,
Koninklijke Philips Electronics N.V.
ZWB388
ZGL388 P
Download from Www.Somanuals.com. All Manuals Search And Download.
Hong Kong – Philips Electronics
Hong Kong Ltd.
Malaysia – Philips Lighting
76, Jalan Universiti
Lighting Asia Pacific Headquarters
27th Floor, Hopewell Centre
17 Kennedy Road,Wanchai, Hong Kong
Tel: + 852 2821 5300
46200 Petaling Jaya
Selangor Darul Ehsan, Malaysia
Tel: + 60 3 7957 5511
Fax: + 60 3 7955 2739
Fax: + 852 2821 5342
E-mail: ltinfo.malaysia@philips.com
E-mail: ltinfo.hongkong@philips.com
New Zealand – Philips Lighting
2Wagener Place, Mt Albert
PO Box 1041,Auckland, New Zealand
Tel: + 64 9 815 4000 or
0800 454 448 (toll free-local only)
Fax: + 64 9 849 7812 or
Australia – Philips Lighting
Level 1, Philips House
65 Epping Road, North Ryde
NSW 2113, Sydney, Australia
Tel: + 61 2 9947 0000 or
1300 304 404 (toll free-local only)
Fax: + 61 2 9947 0325
0800 160 875 (toll free-local only)
E-mail: ltinfo.newzealand@philips.com
E-mail: ltinfo.australia@philips.com
Pakistan – Philips Lighting
F-54, S.I.T.E.
China – Philips Lighting
No. 1805 HuYi Road, MaluTown
Jiading District, Shanghai, 201801, P.R.China
Tel: + 86 21 5915 4060
Karachi-75730, Pakistan
Tel: + 92 21 256 0071
Fax: + 92 21 257 8920
Fax: + 86 21 5915 4064
E-mail: ltinfo.pakistan_2@philips.com
E-mail: ltinfo.china@philips.com
Philippines – Philips Lighting
Philips House
India – Philips Lighting
Lighting Division
Motorola Excellence Centre, 5th Floor
415/2 Mehrauli-Gurgaon Road
Sector-14, Haryana-122001, India
Tel: + 91 124 509 1900
106Valero St. SalcedoVillage
1227 Makati City, Philippines
Tel: + 63 2 845 7840
Fax: + 63 2 816 6340
E-mail: ltinfo.philippines@philips.com
Fax: + 91 124 509 1912
E-mail: ltinfo.india@philips.com
Singapore – Philips Lighting
620A Lorong 1 Toa Payoh
Singapore 319762, Singapore
Tel: + 65 6882 3530
Indonesia – Philips Lighting
Gedung Philips
J1. Buncit Raya Kav. 99-100
Jakarta 12510, Indonesia
Fax: + 65 6253 2343
E-mail: ltinfo.singapore@philips.com
Tel: + 62 31 8491 674 or
0800 10 52678 (hotline-local only)
Fax: + 62 31 8473 240
Taiwan – Philips Lighting
25B, No.66, Chung HsiaoW. Road
Sec. 1,Taipei,Taiwan
E-mail: ltinfo.indonesia@philips.com
Tel: + 886 2 2382 7666 or
0800 231 099 (toll free-local only)
Fax: + 886 2 2382 4422
Japan – Philips Lighting
Philips Building
13-37, Kohnan 2-chome
Minato-ku,Tokyo 108-8507, Japan
Tel: + 81 3 3740 5156
E-mail: ltinfo.taiwan@philips.com
Thailand – Philips Lighting
515 Moo 4, Pattana 3 Road
Fax: + 81 3 3740 5163
E-mail: ltinfo.japan@philips.com
Bangpoo Industrial Estate, Soi 8B
Preaksa, Samutprakarn 10280,Thailand
Tel: + 66 2 709 3300
Korea – Philips Lighting
260-199 Itaewon-dong
Fax: + 66 2 740 4960-1
Yongsan-ku, Seoul 140-200, Korea
Tel: + 82 2 709 1312
E-mail: ltinfo.thailand@philips.com
Fax: + 82 2 709 1350
E-mail: ltinfo.korea@philips.com
Vietnam – Philips Lighting
99-101 Ham Nghi Street
Ward: NguyenThai Binh
District 1, Ho Chi Minh City,Vietnam
Tel: + 84 8 914 2248 Ex.304
Fax: + 84 8 914 2249
32 2 B21 3 001-01
E-mail: ltinfo.vietnam@philips.com
© 2003 Koninklijke Philips Electronics N.V.
All rights reserved, reproduction in whole or in part without permission is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Pelco Security Camera C401M C User Manual
Petsafe Pet Fence In Ground Fence Kit User Manual
Philips Car Video System 170V9 User Manual
Philips Home Theater System HK 0947 NP2500 FR User Manual
Philips Portable CD Player AQ6524 00Z User Manual
Phoenix Gold Speaker ATCLCR6 User Manual
Pinnacle Design TV Video Accessories TV24203 User Manual
plawa feinwerktechnik GmbH CoKG Portable Multimedia Player MOVO1 User Manual
Poulan Snow Blower 418962 User Manual
PYLE Audio Cassette Player PT 669D User Manual