PYLE Audio Cassette Player PT 669D User Manual

MECHANICAL DECK  
PT-669D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Panel Information  
2
3
4
2
DECK B  
COUNTER  
REC CrO2  
ON/STANDBY  
POWER  
PLAY CrO2  
HI.SP.DUBBING  
DECK A PLAYBACK  
REC/PLAYBACK BECK B  
DUBBING  
REC LEVEL  
MIN  
MAX  
6
1
10  
9
8
5
7
6
(play): Press to play the tape.  
1. ON/STANDBY SWITCH  
Press button to switch “ON” the unit and press again to switch  
“OFF” unit into “STANDBY MODE”. If the unit is left unattended  
for long period, remove the plug from the power socket.  
2. CASSETTE HOLDER  
(rewind): Press to rewind the tape  
(fast forward):  
Press to fast forward the tape.  
(stop/eject)  
Press to stop the tape. Pressing this button after the tape  
stops opens the cassette holder.  
(pause):  
3. PEAK LEVEL INDICATOR  
These indicate the recording level during recording and output  
level during playback. The LED indication varies with the signal  
strength during recording and playback.  
* HIGH SPEED  
Press to temporarily stop the tape in the record or playback  
mode. Press it again to release the pause mode and restart  
the tape.  
This lights when in the high- speed dubbing.  
* DYNAMIC NR  
7. REC CrO2 SWITCH  
When you need the Dynamic noise reduction, push the level  
switch to the left.  
For recording with CrO2 tape.  
8. HIGH SPEED DUBBING SWITCH  
When you need dubbing, press this switch and the relative light  
will be lit.  
* PLAY CrO2/ METAL  
This lights when the CrO2/metal function is operated.  
* REC CrO2  
9. DUBBING SWITCH  
This lights when CrO2 function is operated.  
4. TAPE COUNTER AND RESET BUTTON (DECK B)  
When recording or playing, you can use the tape counter to count  
the tape length.  
Press the DUBBING switch to get set for further record functions  
meanwhile relative light will be indicated.  
10. PLAY CrO2/METAL SWITCH  
Set these switches to NORM when using normal tape, to CrO2  
when using chrome tape, and to METAL when using metal tape.  
5. REC LEVEL SWITCH  
Adjust the record level.  
6. CASSETTE OPERATION BUTTONS  
REC  
This lights when deck B is in the recording the record-pause  
mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Procedures  
R
IS  
K
O
F
EL  
E
C
T
RIC  
S
H
OC  
K
D
O
N
O
T
O
P
E
N
LINE  
(IN)REC P LAY(OUT)  
INTEGRATED CIRCUIT  
AC 220V~ 2 30 V 5 0Hz  
REMOTE S YS TEM  
TO AMP  
AUDIO  
TAPE  
EQ  
CD  
LOGIC TAPE  
IN  
FM  
75  
REC  
EQ  
AM  
P LAY  
LOOP  
REC  
P LAY  
AUX  
CD  
IN  
Playback a recorded tape (DECK A or DECK B)  
1. Switch on the power of the unit.  
2. Press the Stop/Eject button and insert a recorded cassette tape. For CrO2/metal tape, further press the CrO2/metal switch and the light at  
the indicator will be lit up.  
3. Press the PLAY button.  
4. Adjust the Amplifier Volume and Graphid Equalizer controls for your desired sound level and taste.  
5. Press the STOP/EJECT button to stop playback at any time.  
Fast forward and rewind (Deck A or Deck B)  
For fast winding or rewinding the tape, press the FFWD or REW button. Press the STOP/EJECT button when the desired location has been  
reached. When the end of the tape has been reached, the FFWD or REW button will be released automatically.  
Pause (DECK A or Deck B)  
Press the PAUSE button to momentarily stop tape travel during playback or recording. Re-press the button for pause release and playback or  
recording tape re-start.  
Full automatic stop (Deck A or Deck B)  
Press the STOP/EJECT button to stop playback (or recording) at any time. When the end of the tape has been reached, any of the PLAY,  
REC, REW or FFED buttons, if pressed, will be automatically released and the head block completely separates from the tape and capstan.  
This protects tape and prevents pinch roller wearing out.  
Recording (Deck B): When recording use the Deck B.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Procedures  
Manually level control recording  
This unit has record level volume to adjust the record level. Usually, the volume has a center click. When it reaches the center click position,  
the tape can be recorded normally. If the sound source signal is too strong, a red spot will be appeared in the record level indicator. You can  
adjust the record level volume to left position and vice versa. In normal state, the sound source level is between the red and green spots  
(that’s 0dB).  
1. Press the STOP/EJECT button and insert a cassette.  
2. When CrO2 tape is used for recording, press the REC CrO2 switch.  
3. Press the record button. The level meter at the peak level indicator will shift and the REC light will be lit up indicating t hat recording is  
underway.  
4. Press the STOP/EJECT button to stop recording at any time.  
Pause  
Press the PAUSE button to momentarily stop tape travel during recording. Re-press the button to pause release and recording restart.  
Dubbing operation (Deck A—  
Deck B)  
This unit enables you to dub a recorded tape to another tape by using the built-in double deck mechanisms. It is performed only one way  
from the Deck A to Deck B.  
Preparation  
1. Insert a cassette for playback in DECK A.  
2. Select tape DIRECTION button (FFWD or REW) for the desired location of the tape to the beginning.  
3. Insert a cassette into DECK B.  
4. Select the dubbing speed by the dubbing High speed switch.  
5. There are two dubbing speeds: High speed and Normal speed. High speed doubles Normal speed.  
6. For high speed dubbing, press High speed switch, the light in the indicator will be lit up and the high speed dubbing is then activated.  
7. Normal speed dubbing requires no pressing of the High speed switch, and no light will be shown at the indicator at all.  
8. Press the PAUSE button of DECK A.  
9. Then, press the PLAY button of DECK A.  
10. Press the RECORD button of DECK B.  
11. Press the PAUSE button again of DECK A to release the pause mode. The unit will start the synchronized dubbing operation.  
12. To stop dubbing operation, press the STOP/EJECT button of DECK B.  
Note: Do not change dubbing speed during dubbing operation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Type  
Stereo double cassette deck  
4-track 2-channel  
Motors  
DC servo motor x 2  
Track system  
Fast Forward/Rewind time Approx. 100 Sec. with  
C-60 cassette  
Tape speed  
4.8 cm/sec  
Input terminals  
LINE IN x 2  
Min. input level: 80mV  
Input impedance: 50kΩ  
Frequency response (-20dB recording)  
Output terminals  
Chrome tape  
Normal tape  
40-15,000Hz (±3dB)  
LINE OUT x 2  
Output: 600mV (0dB)  
Output impedance: 5kΩ  
AC 220V ~50Hz  
240V ~50Hz  
40-14,000 Hz (±3dB)  
(0dB recording)  
Chrome tape  
Normal tape  
Power requirement  
For U.K  
40-8,000 Hz (±3dB)  
40-8,000 Hz (±3dB)  
58dB  
For U.S.A. & Canada  
Power consumption  
Dimensions  
110V ~60Hz  
S/N ratio  
10W  
Wow and flutter  
Crosstalk  
<0.2% (DN 45500)  
40dB (1KHz)  
420mm x 130mm x 220mm  
(W x H x D)  
Harmonic distortion  
Less than 1%  
Weight  
4Kg (8.5lbs)  
(at 1KHz, OVU 3 rd  
H.D, Normal tape)  
40dB (1KHz)  
ACCESSORIES  
Pin plug cord…2  
Channel separation  
Head  
Deck A for Auto playback)  
Deck B for recording/playback,  
2-gap ferrite head for erasure.)  
Design and specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MADE IN C HINA  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Car Satellite Radio System C1501M User Manual
Philips DVD Recorder DVDR560H 97 User Manual
Philips Fax Machine 253117544 B User Manual
Philips Headphones SHE9700 User Manual
Philips Speaker BC 8310 User Manual
Philips Stereo System CD 610 User Manual
Philips Surge Protector SPB4230WA 17 User Manual
Philips Work Light CDM MR16 User Manual
ProForm Treadmill PFTL69712 User Manual
PYLE Audio Musical Instrument Amplifier PLTBA10 User Manual