Philips TV VCR Combo 14PV401 User Manual

TVCR

MO DEL NO.:

14PV125/01, 14PV225/01

14PV422/01

Thank you for buying a Philips TV-Video combi. This TV-Video combi is one of the most sophisticat-

ed and easy-to-use TV-Video combi on the market. Please take the time to read this operating manu-

al before using your TV-Video combi. It contains important information and notes regarding operation.

The TV-Video combi should not be turned on immediately after transportation from a cold to a

hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transport-

ing the device. The TV-Video combi needs this time in order to become acclimatised to its new envi-

ronment (temperature, air humidity, etc.).

This TV-Video combi is used for the recording and playback of VHS videocassettes.

Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used

with a suitable adapter.

PAL

We hope you enjoy your new TV-Video combi.

These operating instructions have been

printed on non-polluting paper.

Important notes regarding operation

Danger: High voltage!

Deposit old batteries at the appropriate col-

lection points.

There is a risk of an electrical shock!

The TV-Video combi does not contain any

components that can be repaired by the

customer. Please leave all maintenance

work for qualified personnel.

Please make use of the facilities available in

your country for disposing of the packaging

of the TV-Video combi in a way that helps to

protect the environment.

As soon as the TV-Video combi is connect-

ed to the power supply, some components

are in constant operation. To-switch off the

TV-Video combi completely you must dis-

connect it from the mains or switch it off with

the main switch.

This electronic device contains many materi-

als that can be recycled. Please enquire

about the possibilities for recycling your old

device.

So that you can identify your machine for service

questions or in the event of theft, enter the serial

number here. The serial number (PROD.NO.) is

printed on the type plate fixed at the back of the

device.

Make sure that air can circulate freely

through the ventilation slots on the TV-Video

combi. Do not place the device on an

unsteady base.

Make sure that no objects or liquids enter

the TV-Video combi. Do not place vases or

the like on the TV-Video combi. If liquid is

spilt into it, immediately disconnect the TV-

Video combi from the power supply and call

After-sales Service for advice.

MODEL NO. : 14PV125/01, 14PV225/01

14PV422/01

PROD. NO.

...........................

This product complies with the requirements of

Directive 73/23/EEC +89/336/EEC +93/68 EEC.

Do not place any combustible objects on the

device (candles, etc.).

Make sure that children do not place any

foreign objects within the openings or venti-

lation slots.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front of the device

VIDEO

AUDIO

STANDBY

P-

P+

Standby/on: To switch TVCR on or off, interrupt menu function.

–

Volume: In connection with the button

to adjust the volume.

Programme number minus: previous programme number

Programme number plus: next programme number

Record: To record the programme currently selected.

Playback: To play a recorded cassette.

Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then

ejected from the machine.

When tape playback is stopped, press to fast forward the tape at hight speed.

When tape playback is stoped, press to rewind the tape at hight speed.

Sockets on the front:

White socket / AUDIO input socket: To connect a camcorder or video games (audio).

VIDEO

Yellow socket /

Small socket /

input socket: To connect a camcorder or video games (video).

socket for headphones: To connect headphones.

Back of the set

EXT/AV1

Aerial input socket: To connect the aerial cable

EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc

Power switch: To switch the TV-Video Combi off.

Caution: If you switch off using the power switch, TIMER-recordings are impossible!

The control lights at the front of machine

STANDBY

Standby light: lights up when the TV-Video Combi has been switched on by means of the main

switch.

RECORD

Recording light: lights up during recording.

Fast blink: recording pause; timer recording not stand-by.

Slow blink: timer recording is stored in a timer block.

_{Download from Www.Somanuals.co}3_{m. All Manuals Search And Download.}

Specifications

Supplied accessories

• Operating instructions

Voltage: 220-240V/50Hz

• Remote control and batteries

Power consumption (Standby): less than 5W

Rewind time: less than 260 seconds (cassette E-180)

Number of video heads : 2

Recording/playback time: 3 hours (SP)

(cassette E-180), 6 hours (LP) (cassette E-180)

Weight without packing in kg: 11.5

Dimensions in cm (HxWxD):40.0x37.3x38.0

Power consumption : 52W

1. Connecting the TV-Video Combi

3.If the little red standby light (STANDBY ) at

the front panel of the set is not lit, please

switch on the set using the main power

Preparing the remote control for

operation

switch. The power switch

left side panel of the set.

4.Language setting picture will appear on the

screen.

is located on the

The remote control and its batteries are packed

separately in the original TV-Video Combi pack-

aging. You must install the batteries in the

remote control before use.

WÄHLEN K L

→DEUTSCH

ENGLISH

ESPAÑOL

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

FORTSETZEN=MENU

1.Take the remote control and the enclosed bat-

teries (2 batteries).

2.Open the remote control's battery compart-

ment and place the batteries in it as shown in

the picture and close the battery compartment.

The remote control is now ready to use.

Its range is approximately 7 metres.

I do not see a Language setting picture

* Check the cable connections.

You can find more details in chapter 'Preparation

for use'.

Connecting additional devices

Connecting the cable

You can connect additional devices such as

decoders, satellite receivers, camcorders, etc. to

the EXT1 socket.

1.Insert the aerial cable plug into the AERIAL at

the back of the TV-Video Combi.

2.Connect the mains cable to the wall socket.

The respective scart socket is usually marked

AV'

or 'TV' on the decoder or satellite receiver.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Important notes for operation

Switching on

You can switch on the TV-Video Combi with

Navigation in the screen menu

You can check/change many functions and set-

tings of your TV-Video Combi via on-screen

menu. The individual functions are selected, via

the remote control as follows:

STANDBY/ON y

PLAY B-K

STOP C-L

If you press

PROG P+

FWD 1- B

REW0- s

0..9

PROG P–

while

the set is in Stand-by, the power will be auto-

matically turned on.

Call up the menu: with

PLAY B-K STOP C-L

0..9

To select: with

Note that the keys

will be inactive for

about 5 seconds just after having switched the

TV-Video combi off.

To enter or change your selection: with the

0..9

PLAY B-K STOP C-L

number buttons

or with

Power outage/no power

FWD 1- B

To save or confirm: with

To cancel: with ^CLEAR.

STATUS/EXIT

Channel information remains saved for up to 10

year, the time and timer information is saved for

up to 1 minute.

To end: with

SELECT K L CHOOSE B

→TIMER

PICTURE CONTROL

RECORD SET UP

VCR SET UP

TUNER SET UP

GENERAL SET UP

END=EXIT

_{Download from Www.Somanuals.co}5_{m. All Manuals Search And Download.}

3. Installing your TV-Video Combi

Preparation for use

Decoder allocation

This chapter shows you how to prepare your TV-

Video Combi for use. The TV-Video Combi auto-

matically seeks out and stores all available TV

channels.

Some TV channels transmit encoded TV signals

which can only be viewed with a commercially

purchased or hired decoder without distur-

bances. You can connect such a decoder to this

TV-Video Combi. The following function will auto-

matically activate the connected decoder for the

desired TV channel.

Connecting additional devices

After you have connected additional devices

(satellite receiver, etc.) through the aerial cable,

switch them on. The automatic channel search

will recognise them and save them.

0..9

1.Use ^{PROG P+}

PROG P– or

to select the

TV channel which you would like to allocate

the decoder to.

1.Select the desired language for the on-screen

2.Press

. The main menu will appear.

PLAY B-K STOP C-L

menu by pressing

PLAY B-K STOP C-L

3.Use

SET UP'. Then press

to select 'TUNER

2.Press

FWD 1- B

3.Confirm with ^{PROG P+}.

The automatic TV channel search starts.

PLAY B-K STOP C-L

4.Use

to select 'MANUAL

FWD 1- B

TUNING'. Then press

PLAY B-K STOP C-L

5.Use

to select

'DECODER'.

PLEASE WAIT

MANUAL TUNING

START

FINISH

PROG.

CHANNEL

→DECODER

SKIP

P55

055

[OFF]

→→→→→→→→→→→→→→→→→→→→→→→

<14PV 225>

4.'TIME' and 'DATE' will appear on the TV

SELECT K L CHOOSE B

END=EXIT

screen.

FWD 1- B

6.Use

to select 'ON'

TIME --:--

(Decoder switched on).

DATE --/--/--

How can I switch off the decoder?

FWD 1- B

Use

to select 'OFF' (Decoder

SMART CLOCK [ON]

switched off).

END=EXIT

STATUS/EXIT

7.To end, press

The decoder has now been allocated to this TV

channel.

5.Check 'TIME'. If required, please change the

0..9

time with the number buttons

6.Check if the displayed settings for 'DAY',

'MONTH' and 'YEAR' are correct.

7.When all information is correct, save by

STATUS/EXIT

pressing

The preparation for use is now complete.

Satellite receiver

If you are connecting a satellite receiver, please

read the section 'Using the satellite receiver'.

Decoder

If you are connecting a decoder, you must

install it as described in the next section.

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual TV channel search

Using the satellite receiver

In some cases it can occur that all TV channels

are not found and saved during the first installa-

tion. In this case, the missing TV channels must

be searched for and stored manually.

You can receive channels from the satellite

AV1/EXT1

receiver via the scart socket

To do this, select the channel number 'AV1' by

0..9

pressing 0,0,1, with the keys

on the remote

1.Press

. The main menu will appear.

control.You will have to select the channel you

want to receive on the satellite receiver itself.

PLAY B-K

2.Select 'TUNER SET UP' with

STOP C-L

FWD 1- B

and confirm with

PLAY B-K

3.Select 'MANUAL TUNING' with

Automatic Tuning

STOP C-L

FWD 1- B

and confirm with

During installation, all available TV channels are

searched for and saved. If the channel assign-

ments of your cable or satellite TV provider

change or if you are reinstalling the TV-Video

Combi, e.g. after moving house, you can start

this procedure again. This will replace the TV

channels already saved with the new ones.

PLAY B-K STOP C-L

4.Select 'PROG.' with

. Then

FWD 1- B

press

MANUAL TUNING

→PROG.

CHANNEL

DECODER

SKIP

P55

055

[OFF]

1.Press

. The main menu will appear.

PLAY B-K

2.Select 'TUNER SET UP' with

SELECT K L CHOOSE B

STOP C-L

FWD 1- B

and confirm with

END=EXIT

PLAY B-K

3.Select 'AUTO TUNING' with

STOP C-L

FWD 1- B

, and confirm with

PLAY B-K STOP C-L

0..9

5.With

, select the

desired programme number that you want to

use for the TV channel, e.g. 'P01'. Then press

FWD 1- B

PLEASE WAIT

START

What is a special channel?

TV channels are transmitted in certain pre-defined

frequency ranges. These ranges are divided into

channels.

FINISH

→→→→→→→→→→→→→→→→→→→→→→→

A specific frequency/channel is assigned to each

TV station.

Certain frequency ranges are specified as special

channels (hyperband channels).

4.The automatic TV channel search starts. This

allows the TV-Video Combi to save all avail-

able TV channels. This procedure may take

several minutes.

5.When the TV channel search is complete,

'AUTO TUNING COMPLETED' will briefly

appear on the TV screen.

PLAY B-K STOP C-L

6.Select 'CHANNEL' with

FWD 1- B

and confirm with

. Then enter the

0..9

desired channel with

When a channel is found,it will stop searching. If

FWD 1- B

this is the channel you want, press

. If

you set SKIP on for a channel, this channel will

be ignored when going through the channels

PROG P+

PROG P–

with

To search for other TV channels, begin again at

step 4.

I don't know the channels for my TV stations

PLAY B-K STOP C-L

In this case, press

in 'CHAN-

NEL' to start the automatic channel search. A

changing channel number will appear on the TV

screen. Continue the automatic search until you

have found the desired TV channel.

STATUS/EXIT

7.To end, press

_{Download from Www.Somanuals.co}7_{m. All Manuals Search And Download.}

PLAY B-K STOP C-L

3.Select 'LANGUAGE' with

Sorting and clearing TV channels

manually

FWD 1- B

and confirm with

SELECT K L

You can use this function to individually sort the

TV channels already saved or to delete unwant-

ed TV channels or those with poor reception.

DEUTSCH

→ENGLISH

ESPAÑOL

FRANÇAIS

ITALIANO

The clock resets automatically

NEDERLANDS

If you save a TV channel that transmits TXT/PDC

on programme number ‘P01’, date and time will

and constantly be updated. As a result, time

changes, i.e. daylight savings time, will be set

automatically.

SVENSKA

END=EXIT

PLAY B-K

4.Select the desired language with

STOP C-L

STATUS/EXIT

5.To end, press

1.Press

. The main menu will appear.

PLAY B-K

2.Select 'TUNER SET UP' with

Setting the clock

STOP C-L

FWD 1- B

and confirm with

PLAY B-K STOP C-L

3.Select 'MOVE' with

confirm with

, and

If the display shows an incorrect time or ' --:-- '

the time and date must be reset manually.

FWD 1- B

1.Press

. The main menu will appear.

MOVE

PLAY B-K

2.Select 'GENERAL SET UP' with

→P01: 02

P02: 03

P03: 05

P04: 10

P05: 74

P06: 90

P07: 99

P08: 121

P09: 124

P10: 130

STOP C-L

FWD 1- B

and confirm with

PLAY B-K STOP C-L

3.Select 'CLOCK' with

confirm with

and

FWD 1- B

SELECT K L CHOOSE B

END=EXIT

TIME --:--

DATE --/--/--

PLAY B-K STOP C-L

4.With

, select the saved TV

channel that you want to move.

SMART CLOCK [ON]

FWD 1- B

5.Confirm with

PLAY B-K

6.Move the selected channel with

END=EXIT

STOP C-L

to the programme number you want

to assign.

Then pless

ber will change to '_ _'

7.Confirm with

8.To assign other TV channels to a programme

number, repeat steps 4 to 7.

9.Confirm the assignment of the TV channel

4.Check the time in 'TIME'. If required, please

FWD 1- B

. The programme num-

0..9

change the time with

5.Check 'DAY', 'MONTH' and 'YEAR' in the

same way.

(Choose 'SMART CLOCK' ON or OFF with

FWD 1- B

. [14PV225])

STATUS/EXIT

6.To end, press

with

MOVE menu

STATUS/EXIT

10.To exit the

, press

MOVE menu

Time/date is displayed incorrectly despite

manual setting

* With Smart Clock, if you save a TV channel

that transmits TXT/PDC on programme num-

ber 'P01', date and time will automatically be

Setting the language

You have the option of setting one of the dis-

played languages for the on-screen menu (OSD).

updated when the TV-Video Combi is in

Stand-

If you wish to switch this automatic time cor-

rection off, select 'OFF' for Smart Clock. You

can reactivate this function at any time by

selecting Smart Clock 'ON'.

1.Press

. The main menu will appear.

PLAY B-K

2.Select 'GENERAL SET UP' with

STOP C-L

FWD 1- B

and confirm with

Download from Www.Somanuals.com. All Manuals Search And Download.

4. TV SET FUNCTIONS

PLAY B-K STOP C-L

3.Select an item using

, and

Selecting a TV channel

REW0- s

FWD 1- B

then modify with

Select the desired TV channel (= the programme

SELECT K L ADJUSTE s

0..9

number) with ^{PROG P+}, PROG P– or with

on the remote control.

BRIGHTNESS

CONTRAST

COLOUR

SHARPNESS

TINT

Selection of the scart socket

To select the Scart socket, please enter 0,0,1,

END=EXIT

0..9

with the keys

on the remote control. AV1

appears on the screen.

STATUS/EXIT

4.To end, press

'TINT' appears only when receiving NTSC sig-

nals from another source.

Selection of the front A/V sockets

To select the front A/V sockets, please enter

How do I read TELETEXT? [14PV225]

0..9

0,0,2, with the keys

on the remote control.

'AV2' appears on the screen.

Many TV channels transmit TELETEXT informa-

tion along with their TV channels. With this TV-

Video Combi you can retrieve this information

and display it on the screen using the built-in

TELETEXT decoder.

Volume control

You can adjust the volume using VOL5+ ,

VOL5– on the remote control.

1.Press

to switch the TELETEXT decoder

on. Your TV-Video Combi will now show

TELETEXT for the TV channel you have

If you would like to change the volume on the

machine, press ^5–or ⁵⁺on the TV-Video

Combi.

selected. Press

again to show TELE-

TEXT in transparent mode.

2.If you want to select another page, type in the

number of the page with the number buttons

If you want to mute the sound temporarily

MUTE

(e.g.:during a telephone call), press

the remote control. When you press

0..9

on the remote control.

MUTE

With the colour buttons on your remote control

you can directly select the page numbers

shown at the bottom of the TV screen.

again, the sound will return at its original vol-

ume level.

The button

page.

takes you back to the start

Picture settings

3.Press

off.

to switch the TELETEXT decoder

The picture can be adjusted according to your

personal preferences.

These settings are automatically stored after

exiting the main menu.

Special TELETEXT functions

[14PV225]

1.Press the

. The main menu will appear.

In TELETEXT mode you can use the special

TELETEXT functions.

PLAY B-K

2.Select 'PICTURE CONTROL' with

STOP C-L

FWD 1- B

and confirm with

: enlarge font

: select TELETEXT sub-page

: recall hidden information

: stop page changes

: go back to start page

_{Download from Www.Somanuals.co}9_{m. All Manuals Search And Download.}

The maximum time period to be set until switch-

off is 2 hours.

Switch-off function (SLEEP TIMER)

You can programme your set to switch-off auto-

matically after a predetermined period.

1.Press ^SLEEP.

If you would like to turn this function off, press

SLEEP

on the remote control several times until

2.Press ^SLEEPrepeatedly to extend the time until

switch-off in 30 minute increments.

The screen will show the time remaining until

switch-off, e.g.: '+0:30'.

The machine now counts backwards to the switch-

off time.

switch-off appears. '--:--' will appear on the

screen.

To check the time until switch-off, press

on the remote control.

If a recording is in process, switch-off function

will be cancelled.

SLEEP

5. Playback

Playing cassettes

Playing back NTSC cassettes

You can use this TV-Video Combi to playback

recorded VHS video cassettes. You can operate

the TV-Video Combi using the remote control or

the buttons on the set.

Cassettes that have been recorded in the NTSC

standard (for example, American cassettes) can

be played back using this TV-Video Combi.

Your TV-Video Combi can only record and play

standard VHS cassettes.

Searching for a tape position with

1.Put a cassette into the cassette slot. The cas- picture (scanning)

sette is inserted automatically.

REW0- s

1.While a cassette is playing, press

FWD 1- B

(reverse) or

times.

2.Press

(forward) one or more

DIGITAL STUDIO PICTURE CONTROL

Philips has developed a system which produces

the best possible playback quality. For old and

often-used video cassettes, this system reduces

interference. For new or high quality cassettes,

it emphasises the details.

PLAY B-K

to resume playback.

Still picture

Picture/ sound quality is poor

STILL 2

1.During playback, press

tape and display a still picture.

2.To continue playback, press

Scanning and still motion interferes with the pic-

ture quality. The sound is switched off. This is not

a fault in your TV-Video Combi.

to stop the

When playing rental videos or older, poorer

quality cassettes, it may not be possible to com-

pletely filter out picture and sound interference.

This is not a fault in your machine. Read the

section 'Manual tracking'.

PLAY B-K

2.Press

to view the tape.

STOP C-L

3.To stop the playback, press

Searching for tape position without

picture (forward wind and rewind)

STOP C-L

^STOP/EJECTon the TV-Video Combi.

EJECT A

4.To eject the cassette, press

1.Stop the tape with

^STOP/EJECTwhen the TV-Video Combi stops

the playback.

REW0- s

FWD 1- B

2.Press

(reverse) or

(forward).

STOP C-L

3.To stop the tape, press

Do I need to change the playback speed

when playing back LP recordings?

During playback, the correct speed will automati-

cally be selected. For more information, please

read the section 'Selecting the recording speed

(SP or LP)' in the chapter 'Manual recording'.

Manual Tracking

To adjust the tracking manually, press ^P+or

P-

on the TV-Video Combi during playback

Tracking returns to Automatic Tracking

STOP C-L

Adjustment when you press

or insert a

tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Manual recording

General information

Lining up recordings (assemble cut)

When you add a further recording to a cassette,

which already has a recording on it, a short

blank (flicker) can appear between the old and

the new recording or the picture itself can flicker.

To help reduce these from occurring, proceed as

follows:

Use 'Manual Recording' to make a sponta-

neous recording (for example, a programme cur-

rently being shown).

If you want to start and stop a recording manual-

ly, read the section 'Recording without auto-

matic switch-off'.

1.Find the tape position of the old recording

where you want to insert the new recording.

2.Look at the last minute of the old recording

(playback).

If you want to start a recording manually but

have it stopped automatically, read the section

'Recording with automatic switch-off'. (e.g.

not to record to the end of the tape)

STILL 2

3.Press

at the tape position where

Read the section 'Automatic recording from a

satellite receiver', if you want a recording to be

controlled automatically by a satellite receiver.

the new recording is to go and press ^{REC I}.

4.Now start recording as usual by pressing

^{REC I}on the remote control.

Recording without automatic

switch-off

STOP C-L

5.Stop recording with

Selecting the recording speed (SP

or LP)

1.Insert a cassette.

2.Use ^{PROG P+}PROG P– or

programme number you want to record, for

example, 'P01'.

0..9

to select the

LP allows to double the recording duration on tape

(for example six hours instead of three hours on a

E180 cassette).

3.To start recording, press ^{REC I}.

STOP C-L

4.To stop recording, press

1.Press

. The main menu will appear.

PLAY B-K

2.Select 'RECORD SETUP' with

Recording with automatic switch-off

(OTR One-Touch-Recording)

STOP C-L

3.Select the required recording speed with

FWD 1- B

1.Insert a cassette.

0..9

2.Use ^{PROG P+}

PROG P– or

to select the

SELECT K L CHOOSE B

programme number you want to record.

→RECORD SPEED

[SP]

3.Press ^{REC I}.

4.Each time you press ^{REC I}you will add 30

minutes to the recording time.

STOP C-L

5.To stop recording, press

END=EXIT

Preventing accidental erasing

STATUS/EXIT

4.To end, press

'SP'/'LP'

All cassettes (except

rental and pre-recorded

cassettes) have a secu-

'SP': StandardPlay (normal recording speed) offers

the usual first-class picture quality.

rity tab on the back of

the cassette.

'LP': LongPlay (half recording speed, double

recording time). 6 hours can be recorded on a 3-

hour cassette (E180) with a somewhat reduced

picture quality.

To prevent recording

over important recordings (erasing), you can

remove this security tab.

If you later decide to record on a protected cas-

sette, simply cover the hole with adhesive tape

or slide the tab to the right.

Download from Www.Somanuals.com. All Manuals Search And Download.

7. Programming a recording (TIMER)

General information

Programming a recording

Use a TIMER programming to automatically start

and stop a recording at a later time or date. The

TV-Video Combi will switch to the right pro-

gramme number and begin recording at the cor-

rect time. With this TV-Video Combi, you can

pre-programme up to eight recordings within a

period of one year. To make a programmed

recording, your TV-Video Combi needs to know:

*the date you want to make the recording

*the programme number of the TV channel

*the start and stop time of the recording

1.Press

. The main menu will appear.

PLAY B-K STOP C-L

2.Select 'TIMER' with

. Then

FWD 1- B

press

3.Select ONCE, DAILY, or WEEKLY recording

PLAY B-K STOP C-L

with

. Then press

FWD 1- B

SELECT K L CHOOSE B

→ONCE

DAILY

WEEKLY

TIMER LIST

*VPS or PDC on or off [14PV225]

This information is saved in a TIMER block.

END=EXIT

[14PV225]

What is 'VPS/PDC'?

If all TIMER blocks are in use, 'FULL' will appear

'VPS' (Video Programming System)/ 'PDC'

(Programme Delivery Control) are used to con-

trol the start and duration of TV channel record-

ings. If a TV programme starts earlier or ends

later than scheduled, the TV-Video Combi will

turn on and off at the correct time.

on the TV screen.

4.Select the desired TIMER block with

0..9

Selecting once/daily/weekly recordings

PLAY B-K STOP C-L

Use

to select from the fol-

lowing options:

What do I need to know about 'VPS/PDC'?

Usually the VPS or PDC time is the same as

the start time. But if your TV guide shows a

VPS or PDC time which is different from the

programme’s scheduled start time, e.g. 20.10

(VPS/PDC 20.14), you must enter the VPS/PDC

time exact to the minute. If you want a start time

different from the VPS/PDC time, you must

switch VPS/PDC off.

'ONCE': Recording once

'DAILY': Repeated daily recordings from

Monday to Friday

'WEEKLY': Repeated weekly recordings (every

week on the same day)

5.Enter the Start time (START) End time

(STOP), Programme number (PROG.),

VPS/PDC information and the Date with

0..9

Programming a recording from the external

sources

You can also programme recording from an

external source via the Scart socket AV1 or the

front A/V connectors AV2.

6.When all inputs are correct, press

STATUS/EXIT

. The programming information

is stored in a TIMER block.

7.Insert a cassette with an intact security tab

(unprotected).

Download from Www.Somanuals.com. All Manuals Search And Download.

How to check, change or delete a

programmed recording (TIMER)

How to change a programmed

recording (TIMER)

1.Press

. The main menu will appear.

1.Press

. The main menu will appear.

PLAY B-K STOP C-L

2.Select 'TIMER' with

. Then

2.Select 'TIMER' with

. Then

FWD 1- B

press

PLAY B-K STOP C-L

3.Select ONCE, DAILY, or WEEKLY recording

3.Select 'TIMER LIST' with

PLAY B-K STOP C-L

FWD 1- B

with

. Then press

and confirm with

FWD 1- B

SELECT K L CHOOSE B

0..9

4.Select a TIMER block with

. (The flashing

ONCE

DAILY

number indicates an empty TIMER block.)

WEEKLY

→TIMER LIST

ONCE

TIMER - 1 2 3 4 5 6 7 8 -

END=EXIT

SELECT TIMER NUMBER

END=EXIT

FWD 1- B

4.Select timer block with

5.To cancel the recording, press

STATUS/EXIT

CLEAR

6.To end, press

CLEAR

5.Press

to delete information, and

0..9

input correct information with

STATUS/EXIT

6.To end, press

Download from Www.Somanuals.com. All Manuals Search And Download.

8. Other functions

STATUS/EXIT

5.To end, press

6.Insert a cassette.

7.Start the continuous playback with

Switching the status display off or

PLAY B-K

Your TV-Video Combi will automatically rewind and

start playing the tape from the begining when it rec-

ognizes a non-recorded part longer 10 seconds.

Along with the on screen menu, the status dis-

play also displays information on the current

operating status (counter, playback, recording,

TV channel, etc.) on the TV screen.

Blue Background on or off

1.Press

. The main menu will appear.

PLAY B-K

2.Select 'VCR SET UP' using

If you want the TV screen to be solid blue when

a weak signal is received, set BLUE BACK-

GROUND to ‘ON’. The screen will be blue and

the sound will be muted. Or, if you want to

receive the weak signal, set BLUE BACK-

GROUND to ‘OFF’.

STOP C-L

FWD 1- B

and confrim with

PLAY B-K

3.Select 'STATUS DISPLAY' with

STOP C-L

SELECT K L CHOOSE B

REPEAT PLAY

→STATUS DISPLAY

BLUE BACKGROUND[ON]

[ON]

1.Press

. The main menu will appear.

PLAY B-K

2.Select 'VCR SET UP' using

STOP C-L

FWD 1- B

and confrim with

PLAY B-K

3.Select 'BLUE BACKGROUND' with

END=EXIT

STOP C-L

FWD 1- B

4.Select 'ON' or 'OFF' with

SELECT K L CHOOSE B

Which settings can I choose?

'ON': Shows the status display for a few sec-

onds only.

REPEAT PLAY

STATUS DISPLAY

→BLUE BACKGROUND [ON]

[ON]

'OFF': Switches off the status display.

STATUS/EXIT

5.To end, press

END=EXIT

Continuous playback

4.Select 'OFF' (no blue background) or 'ON'

FWD 1- B

(blue background on) with

This function can be used to play a cassette

over and over again. When the end of the cas-

sette is reached, it will rewind and start from the

beginning again. This function is activated or

deactivated as follows.

STATUS/EXIT

5.To end, press

Parental control (Child lock)

This function protects your TV-Video Combi from

unwanted use. All button functions on the front of

the machine are blocked.

Programmed recordings will still be recorded (in

spite of the parental control) and cannot be

interrupted.

1.Press

. The main menu will appear.

PLAY B-K

2.Select 'VCR SET UP' using

STOP C-L

FWD 1- B

and confirm with

PLAY B-K

3.Select 'REPEAT PLAY' with

STOP C-L

SELECT K L CHOOSE B

1.Press

. The main menu will appear.

PLAY B-K STOP C-L

2.Use

to select 'GENERAL

→REPEAT PLAY

STATUS DISPLAY

BLUE BACKGROUND[ON]

[ON]

FWD 1- B

SET UP'. Then press

PLAY B-K STOP C-L

3. Use

to select 'CHILD

LOCK'.

FWD 1- B

4. Use

to select 'ON'.

END=EXIT

'If a button at the front of the machine is pressed

while parental control is active, ’CHILD LOCK

ACTIVE’ will appear on the screen for a few sec-

onds.

FWD 1- B

4.Select 'ON' with

If you select 'OFF', continuous playback will be

switched off.

Download from Www.Somanuals.com. All Manuals Search And Download.

9. Before you call an engineer

If, contrary to expectation, you have any prob-

lems using this TV-Video Combi, it may be

caused one of the following reasons.

No recording possible

*The TV channel you want to record is not

stored or you have selected the wrong pro-

gramme number: check TV channels stored.

*A cassette was inserted that does not have the

security tab (cannot be used to record): Insert

a cassette with an intact security tab or

change cassette. For more information, please

see the section ‘Preventing accidental erasing’

in chapter ‘Manual Recording’.

Your TV-Video Combi does not respond to

any button being pressed:

*There is no power supply: check the power

supply.

*Parental control is on:switch the parental con-

trol off.

*There is a technical problem: disconnect from

the mains power supply for 5 minutes, then

power-up again.

[14PV225]

*’VPS/PDC’ switched on but ‘VPS/PDC time’

wrong: enter ‘VPS/PDC time’ exactly to the

If this doesn't help, you can reset your TV-Video

Combi to the default factory settings.

minute. Check your aerial connection.

Resetting devices to default factory settings

*Warning: All the information stored (TV chan-

nels, time and date, TIMER) will be cleared.

1.Switch the TV-Video Combi to stand-by.

2.Press and hold ^{REC I}and ^{PROG P+}at the

same time for 2 seconds or more.

Smart Clock does not work

*You have stored on programme number ‘P01’ a

TV channel that does not transmit TELETEXT.

Store on ‘P01’ a TV channel that transmits

TELETEXT.

*Poor TELETEXT reception. Store a TV channel

on ‘P01’ with good TELETEXT reception.

*You have not activated the Smart Clock func-

tion. Switch the function ‘ON’.

A cassette is jammed in the TV-Video Combi

*Don’t use force. Disconnect the set from the

mains and reconnect it again after a few sec-

onds.

You can also call the customer service centre

in your country.The telephone numbers can be

found on the back of this instruction manual.

Have the model number (MODEL NO) and the

production number (PROD.NO.) of your TV-

Video Combi ready.

Remote control does not work

*Remote control is not pointed at the TV-Video

Combi.

*Take out the batteries, wait for 10 seconds and

place them back in the remote control.

*Batteries have run out. Change the batteries.

No picture when you play a cassette

*There is no recording on the cassette.

Poor picture quality when you play a cas-

sette

*The cassette is badly worn-out or of poor qual-

ity. Use a new cassette.

*Tracking is not properly adjusted. Turn to sec-

tion ‘Manual Tracking’.

*Magnetism from nearby appliances and geo-

magnetism might affect the colour of the TV

picture. Move the TV-Video combi away from

such sources. The TV-Video combi will readjust

itself automatically. If you want to initiate an

immediate readjustment, unplug the TV-Video

combi from the mains and plug it in again

approximately 30 minutes later.

Download from Www.Somanuals.com. All Manuals Search And Download.

PHILIPS NORGE AS

Sandstuveien 70,

PO Box 1, Manglerud

N-0612 Oslo

PHILIPS AUSTRIA GMBH

Triesterstrasse 64

1101 Wien

AUSTRIA

Tel: 0810 001 203

PHILIPS PORTUGUESA, S.A.

Consumer Information Centre

Rua Dr. António Loureiro Borge, nr. 5

Arquiparque, Miraflores

P-2795 L-A-VEHLA

NORWAY

Phone: 2274 8250

PORTUGAL

Phone: 021-4163063

OY PHILIPS AB

Sinikalliontie 3,

02630 Espoo

PHILIPS INFO CENTER

Alexanderstrasse 1

20099 Hamburg

PHILIPS CE, The Philips Centre,

420 - 430 London Road,

Croydon, Surrey

FINLAND

GERMANY

CR9 3 QR

puh. 09 615 80 250

Tel: 0180-53 56 767

UNITED KINGDOM

Phone: 0208-665-6350

PHILIPS KUNDTJÄNST SERVICE CONSOMMATEURS PHILIPS

PHILIPS KUNDECENTER

Frederikskaj 6,

1780 København V

DANMARK

Knarrarnäsgatan 7

Kista

164 85 Stockholm

SWEDEN

BP 0101

75622 Paris Cédex 13

FRANCE

Phone: 0825-889 789

Tlf.: 80 88 28 14

Tel: (0)8 598 52 250

PHILIPS POLSKA

Al. Jerozolimskie 195B

02-222 Warszawa

POLSKA

PHILIPS ELECTRONICS IRELAND LIMITED

Consumer Information Centre

Newstead, Clonskeagh

PHILIPS REPRESENTATION OFFICE

Ul. Usacheva 35a

119048 MOSCOW

DUBLIN 14

RUSSIA

TEL.: (022)-571-0-571

Phone: 01-7640292

Phone: 095-937 9300

PHILIPS CONSUMER ELECTRONICS

Servizio Consumatori

Via Casati 23

20052 Monza - Milano

ITALY

PHILIPS INFO CENTER

Fegistrasse 5

8957 Spreitenbach

SUISSE

Tel.: 0844-800 544

Phone: 800 820026

PHILIPS Iberia, S.A.

C/Martinez Villergas, 49

28027 MADRID

PHILIPS MAGYARORSZÁG KFT.

Fehérvári út 84/a.

Budapest 1119

PHILIPS CUSTOMER CARE CENTER

Twee Stationsstraat 80/

80 Rue des Deux Gares

SPAIN

Phone: 902-11 33 84

HUNGARY

Phone: (01)-382-1700

1070 BRUSSEL/BRUXELLES

BELGIUM (for BENELUX)

Tel: 070-222303

PHILIPS CONSUMENTENLIJN

Postbus 102 5600 AC Eindhoven

NEDERLAND

Tel.: 0900-8406

310? ??? ????

0EMN0---- / T6410/T6510EZ*****

Download from Www.Somanuals.com. All Manuals Search And Download.

Pentax Digital Camera Optio S5i User Manual
Petsafe Pet Fence In Ground Fence Kit User Manual
Philips Car Satellite TV System 40PFL4709 User Manual
Philips Computer Monitor 107T70 User Manual
Philips Sprinkler HP6490 User Manual
Philips TV VCR Combo CCZ092AT User Manual
Pioneer Car Stereo System S P160 User Manual
Poulan Lawn Mower XC1182B User Manual
Poulan Trimmer 545186849 User Manual
ProForm Home Gym PFEL45012 User Manual